Electrical Test & Measurement Equipment Rental Catalog 2021 Are you a heavyweight in electrical testing?

The Megger DLRO2 isn’t!

The DLRO2, a 2-amp DucterTM Low Resistance is a lightweight, handheld instrument that offers fast, accurate, repeatable measurements, even in noisy environments. One of its features includes a brand new ‘difference’ meter that offers repetitive measurements to be easily compared with an initial reference measurement. Other features include: n Long test leads mode at 1A without compromising test speed n IP54 rating allows for outdoor use with protection against dust and moisture n Standard AA rechargeable NiMH batteries assure that the unit is always ready to test Another point worth mentioning is the included Kelvin clip and probe test leads! These provide more testing flexibility for you.

The DLRO2 can measure low resistance values across a wide range of applications, including: n Aviation n Oil and gas pipelines n Wind turbines n Automotive and EV n Rail n Cable manufacturers n Marine n And much more Worth their weight in gold! Setting the standard in insulation testing.

Are you a heavyweight in electrical testing?

Megger MIT series

The Megger DLRO2 isn’t! The Megger MIT series of 5, 10 and 15 kV insulation testers perform better than any other testers on the market today. In fact, some say the instruments The DLRO2, a 2-amp DucterTM Low Resistance Ohmmeter is a lightweight, handheld are the ‘gold standard’ of insulation testers. instrument that offers fast, accurate, repeatable measurements, even in noisy Some of the features of the units include: environments. One of its features includes a brand new ‘difference’ meter that offers repetitive measurements to be easily compared with an initial reference ■ Unique dual-case design for added protection measurement. Other features include: ■ Double insulated test leads for extra safety and reliability n Long test leads mode at 1A without compromising test speed ■ Advanced memory storage with time/date stamp n IP54 rating allows for outdoor use with protection against dust and moisture ■ Unrivaled guard terminal performance n Standard AA rechargeable NiMH batteries assure that the unit is always ready to test ■ High noise immunity – 3 ma (5 and 10 kV) and 6ma (15 kV) Another point worth mentioning is the included Kelvin clip and probe test leads! These ■ Safety rating: CATIV 600 V to 3000m (5 and 10kV); CATIV 1000 to provide more testing flexibility for you. 3000 m (15kV)

The DLRO2 can measure low resistance values across a wide range of applications, So set the standard in your insulation testing including: with the MIT series from Megger. n Aviation n Oil and gas pipelines n Wind turbines n Automotive and EV n Rail n Cable manufacturers n Marine n And much more ProTechAds.qxp_Reliability Ad 2/24/21 8:56 AM Page 2 Why Raytech?

99% of All Raytech Equipment Sold is Still in Operation Today Over 20 years of innovative design and manufacturing means Raytech's equipment is built for the harsh environments of the testing industry. Your test equipment is assured to be in service for a long time.

5-Year Standard Warranty The 5-Year Standard Warranty means years of trouble-free operation, without instrument replacement costs. You can be confident in our instruments’ performance for years to come.

Reliable Support for 100% of the Equipment We’ve Ever Built Raytech supports every product we’ve ever introduced. Your equipment will remain functional, even after it is no longer being sold. We fully support all of our products for the entire time you own them.

#1 in Customer Support • No-charge service evaluations • Hardware, firmware, and software updates • Lifetime product support • Professional, expert service and advice • Certification services provided • Short repair turnaround times

Five Product Lines: Straight-Forward, Easy to Set Up, and Easy to Use

Single and 3-Phase Ratiometers Winding Resistance with Power Factor Test Sets Core Demagnetization

Current Transformer Test Sets 10A and 200A Contact Resistance

Toll Free: 888 484 3779 | Phone 267 404 2676 118 South 2nd Street, Perkasie, PA 18944 www.RaytechUSA.com Toll Free: 888 484 3779 | Phone: 267 404 2676 RaytechUSA.com 118 South 2nd Street, Perkasie, PA 18944 ProTechAds.qxp_Reliability Ad 2/24/21 8:56 AM Page 2 ProTechAds.qxp_Reliability Ad 2/24/21 8:56 AM Page 1 Why Raytech?

99% of All Raytech Equipment Sold is Still in Operation Today Over 20 years of innovative design and manufacturing means Raytech's equipment is built for the harsh environments of the testing industry. Your test equipment is assured to be in service for a long time.

5-Year Standard Warranty The 5-Year Standard Warranty means years of trouble-free operation, without instrument replacement costs. Reliability You Need You can be confident in our instruments’ performance for years to come. Support You Deserve Reliable Support for 100% of the Equipment We’ve Ever Built Raytech supports every product we’ve ever introduced. Your equipment will remain functional, even after it is no longer being sold. We fully support all of our products for the entire time you own them. With a standard 5-YEAR warranty, you can trust Raytech equipment #1 in Customer Support • No-charge service evaluations is built for the harsh environments of our testing industry. • Hardware, firmware, and software updates • Lifetime product support • Professional, expert service and advice Free service evaluations and lifetime product support • Certification services provided guarantees quality service is fast and easy. • Short repair turnaround times

Five Product Lines: Straight-Forward, Easy to Set Up, and Easy to Use Offering the following easy to set up, and easy to use product lines:

• Transformer Ratiometers • Winding Resistance • Contact Resistance

Single and 3-Phase Ratiometers Winding Resistance with Power Factor Test Sets • Current Transformer Test Sets Core Demagnetization • Power Factor Test Sets

Current Transformer Test Sets 10A and 200A Contact Resistance

Toll Free: 888 484 3779 | Phone 267 404 2676 118 South 2nd Street, Perkasie, PA 18944 www.RaytechUSA.com Toll Free: 888 484 3779 | Phone: 267 404 2676 Toll Free: 888 484 3779 | Phone: 267 404 2676 RaytechUSA.com 118 South 2nd Street, Perkasie, PA 18944 RaytechUSA.com 118 South 2nd Street, Perkasie, PA 18944 We know that you need experienced people who understand your electrical test and measurement equipment needs and have a track record of delivering on time, every time. To better serve our customers, we’ve stocked all of our locations with the inventory you need to get the job done.

With local inventory for competitive shipping rates and equipment application support from a dedicated team with decades of experience, you can trust Protec to go above and beyond all others for your satisfaction. We’re the Electrical Test and Measurement Equipment Rental Experts for a reason, let us show you how we earned that reputation.

Large enough to serve your needs, small enough to care.

Dallas Houston 1517 W Carrier Pkwy, Ste 116 14251 Gulfstream Park Dr Grand Prairie, Texas 75050 Webster, Texas 77598 (972) 352-5550 (832) 251-7047 Los Angeles Chicago 2935 E Ricker Way 1501 Wright Blvd Anaheim, California 92806 Schaumburg, Illinois 60193 (657) 758-5098 (847) 434-5808 Reno-Tahoe Atlanta 924 Greg St 880 Veterans Memorial Hwy, SE Sparks, Nevada 89431 Mableton, Georgia 30126 (775) 984-5223 (678) 210-1423 Denver New York 12050 E 45th Ave, Unit 400 70 Triangle Blvd Denver, Colorado 80239 Carlstadt, New Jersey 07072 (720) 826-6378 (201) 450-9743 Rent Quality Products from Industry-Leading Manufacturers

ABB BK Precision Fluke Megger SBS Adwel Carriere Fuji Merlin Gerin Schweitzer AEMC Cooper Power Systems GE Metrel Seaward Agilent Dent Haefely Mikron Siemens Alber DILO HD Electric Olympus SKF (Baker) Allen-Bradley Doble High Voltage Omicron Sonel Altek Dranetz Hioki PdMA Corporation Square D by Schneider Ametek EA Technology Hipotronics Phenix Summit Technology Amprobe Eaton Cutler Hammer Honeywell PMDT Transmation Aqua-Tronics Electrical Test Instruments Hukseflux PowerComm Solutions Utility Relay Company Astro-Med Emerson HV Diagnostics Raytech Vacuum Interrupters Baker ENOSERV IRIS Power RH Systems Vanguard Bender FLIR Manta Rx Monitoring Services WIKA

Calibration Labs Asset Management

Accurate and affordable electrical test Protec offers a full-service Asset Management equipment calibration services for many makes service customized for your individual needs and models of electrical test and measurement that includes: equipment.

• Expedited and Emergency Service - When • Complete in-house maintenance, quality control, calibrated equipment is needed quickly logistics, repair and calibration • Calibration Management Service - Automatic • Analytics to drive educated business decisions notification of equipment coming due for (ROI, Yield, and Utilization) calibration • Inventory access & management 24/7 through our • Equipment Rental Options - We offer rental customer portal & mobile app equipment, so work can continue while equipment • Discounted rentals for supplemental equipment is being calibrated • Multiple locations for housing your equipment • Now calibrating torque wrenches based on demand • Ask about our on-site capabilities • 24/7 support and a dedicated customer service team Two Calibration Lab Locations to Serve You: 1517 W Carrier Pkwy, Ste 116 Grand Prairie, Texas 75050 1501 Wright Blvd Schaumburg, Illinois 60193

Toll Free: (866) 352-5550 About Us

The Electrical Test & Measurement Equipment Rental Experts

To Be the Best at What We Do … Nobody Works Harder For You By a Wide Margin We accomplish this by employing a team Than Protec of professionals with a passion to be the best and a commitment to excellence in everything we do. We understand that you need experienced people to align you with the proper electrical test and Character & Integrity measurement equipment, in the right place at the right Building trust through ethical and time. honorable conduct in all our dealings with customers, vendors, and one another. That’s why we are the number one choice for mission criti- cal equipment, where time, quality and service are vital. Customer Focused Teamwork A commitment to each other and an exceptionally high level of interpersonal team support gives us the ability to make Better Service your emergency our emergency, and your success our success. Everything Protec Equipment Resources offers a large, nationwide rental we do is geared toward making you fleet of electrical test and measurement equipment, and to more competitive and successful in the better serve our customers, all of our locations are stocked with marketplace. inventory.

Superior Customer Service Nationwide Inventory We care about our customers and their success, and strive to provide superior With local inventory for better shipping rates and electrical customer service, from working after testing application support from a team who works hard to get hours to driving 800 miles overnight for to know your special requirements, you can count on Protec to an emergency job … we are there when do what it takes to help you get the job done right. Give us a call and where you need us. and put us to the test.

Atlanta | Chicago | Dallas | Denver | Houston Los Angeles | New York | Reno-Tahoe

t 866-352-5550 protecequip.com NEW INVENTORY

NEW INVENTORY

We are please to announce the addition of the following equipment to our already extensive catalog of electrical test and measurement equipment. Protec carries a full inventory of equipment for all your testing needs.

AEMC 6536 Insulation Resistance Test Set

• For more information refer to page 63

AEMC PEL 103 Power and Energy Logger

• For more information refer to page 92

Aqua-Tronics EG 3000 T Secondary Cable Fault Locator

• For more information refer to page 8

Doble TR3171 Motion/Travel Transducer

• For more information refer to page 51 NEW INVENTORY

New Inventory

Electrical Test Instruments ETI ACDC-10 AC and DC Power Supply

• For more information refer to page 82

Fluke 9040 Phase Rotation Indicator

• For more information refer to page 78

Haefely 2293 Automatic Transformer Winding Analyzer

• For more information refer to page 114 or 119

Megger SPI225 Smart Primary Injection Test System

• For more information refer to page 64

Omicron FRANEO 800 Sweep Frequency Response Analyzer

• For more information refer to page 112 NEW INVENTORY

New Inventory

Omicron CP TD12 Capacitance and Power/Dissipation Factor Module

• For more information refer to pages 33, 49, 111 or 115

RH Systems 973-SF6 Gas Analyzer

• For more information refer to page 28

Seaward PV150 Solar Installation Tester

• For more information refer to page 84

Seaward Solar Utility Pro Complete Solar Testing Kit

• For more information refer to page 84

Siemens TD500 Secondary Injection Test Set

• For more information refer to page 66 NEW INVENTORY

New Inventory

Sonel UV-260 Corona Camera

• For more information refer to page 20 or 89

Vanguard TRF-250A Three-Phase Transformer Turns Ratio Meter

• For more information refer to page 117 TABLE OF CONTENTS

TABLE OF CONTENTS

Battery Test Equipment...... 1 Battery Ground Fault...... 1 Battery Hydrometers...... 2 Battery Impedance...... 3 Battery Load Units...... 4 Battery Voltage Monitors...... 5

Cable & Bus Test Equipment...... 7 Cable Fault Locating Test Sets...... 7 Hipotential Test Sets...... 13 Partial Discharge (On-Line) Test Sets...... 18 Partial Discharge (Off-Line) Test Sets...... 20 Tan Delta Test Sets...... 21

Electrical Safety...... 23

Gas & SF6 Analysis...... 25

Ground Resistivity...... 29

High Voltage Circuit Breaker & Substation...... 35 Capacitance & Inductance Test Sets...... 35 Circuit Breaker Timing Test Sets...... 36 Digital Low Resistance ...... 38 Hipotential Test Sets...... 42 Power Factor Test Sets...... 47 Recloser Control Test Sets...... 50 Transducer Test Sets...... 51

Low/Medium Voltage Circuit Breakers & Switchgear...... 53 Digital Low Resistance Ohmmeters...... 53 High Current Test Sets...... 57 Insulation Resistance Test Sets...... 63 Primary Current Injection Test Sets...... 64 Secondary Current Injection Test Sets...... 65 Vacuum Bottle Test Sets...... 68

Meters & Instrumentation...... 71 Borescopes...... 71 Capacitance & Inductance Meters...... 72 Decade Boxes...... 73 Dew Point & Humidity Analyzers...... 74 Dry Block Calibrators...... 75 Infrared Survey...... 76 Motor & Semiconductor Analyzers...... 78 Multifunction ...... 81 Power Supplies...... 82 Photovoltaic / Solar Monitoring...... 84 Watthour Meters...... 85 TABLE OF CONTENTS

Partial Discharge...... 87 Off-Line Test Sets...... 87 On-Line Test Sets...... 88

Power Quality...... 91 Data Acquisition...... 91 Power Quality Analyzers...... 92

Relay & Protection...... 99 Communications Analyzers...... 99 Single-Phase Test Sets...... 100 Three-Phase Test Sets...... 101

Transformer Test & Diagnostics...... 105 Current Transformer (CT) Test Sets...... 105 Oil Test Equipment...... 108 Power Factor Test Sets...... 109 Sweep Frequency Response Analyzers...... 112 Turns Ratio Test Sets...... 114 Winding Resistance Test Sets...... 119 BATTERY TEST EQUIPMENT | BATTERY GROUND FAULT

BATTERY TEST EQUIPMENT

Batteries are an integral part in electrical power systems. They serve a critical role in supplying electricity for power system protection and control circuits in standby applications, as well as backup power for systems that require uninterrupted power. Batteries are often taken for granted while everything appears to be working normally, or as expected. However, it’s when things go unexpectedly wrong that batteries are called into action. If at that time they are unable to perform, the affected circuits could suffer extensive damage and may also disturb the operation of other electrical systems. This is the reason that entities such as N.E.R.C. can legally enforce battery testing standards in the electrical power industry. The type of testing and frequency at which it is performed will be dependent on the electro-chemical make-up of the batteries. Regularly scheduled battery testing and maintenance can provide a confidence in the reliability of our battery systems. Protec maintains an inventory of battery test equipment for all your battery testing needs.

Battery Ground Fault

Megger BGFT Battery Ground Fault Tracer

• Identifies and locates ground faults in ungrounded DC systems • Operates in energized systems • Optional bridge measurement of fault resistance (from 1 kΩ to 399 kΩ) • Soft-start charging system prevents sensitive relay tripping

Megger BGFT

Megger BGL Battery Ground Fault Locator

• Allows tracking and locating of ground faults on live or dead battery systems • Operates on systems that are either floating or grounded through a resistor • Operates in the presence of surge-correction capacitors Megger BGL • Designed to work on battery systems up to 260V DC

(866) 352-5550 | protecequip.com 1 BATTERY TEST EQUIPMENT | BATTERY HYDROMETERS

Battery Hydrometers

Alber DMA-35-CRT Hydrometer with Data Logging

• Measures and samples density and concentration • DMA-35-CRT model integrates with Alber CRT-400 for comprehensive reporting through Alber battery analysis software • Robust and reliable system

Alber DMA-35-CRT

Storage Battery Systems SBS-2003 Battery Hydrometer/Density Meter

• Automatic temperature compensates to 77º F (25º C) • Capability of field calibration using distilled water • Automatically compensates specific gravity for fluid temperature • IP64 water resistant and for lead-acid batteries only

Storage Battery Systems SBS-2003

Storage Battery Systems SBS-3500 Battery Hydrometer/Density Meter

• Stores up to 100 sample IDs for easy sample identification • Easy and fast replacement of entire pump assembly • Measures specific gravity and temperature • Suitable for both lead-acid and nickel-cadmium batteries

Storage Battery Systems SBS-3500

2 (866) 352-5550 | protecequip.com BATTERY TEST EQUIPMENT | BATTERY IMPEDANCE

Battery Impedance

Alber Cellcorder CRT-400 Cell Resistance Tester

• Measurement and results not affected by ripple (AC noise), natural battery capacitance or the magnitude of test current • Measures and records cell voltage, internal battery resistance and intercell resistance • Internal resistance measurements detect failing cells before failure • Test battery cells from 0 to 16V Alber Cellcorder CRT-400

Megger BITE2P Battery Impedance Test Set

• On-line testing requiring no downtime • Enhanced printing and memory functions • Measures impedance and DC voltage values for all lead-acid and nickel-cadmium cells up to 7,000Ah • Stores more than 2,000 sets of readings in up to 300 tests

Megger BITE2P

Megger BITE3 Battery Impedance Test Set

• Calculates impedance automatically and stores results for on-site review to make immediate decisions • On-line testing requiring no downtime • Stores more than 1 million cells’ data in any string configuration • Download results to PowerDB software for quick and easy analysis

Megger BITE3

(866) 352-5550 | protecequip.com 3 BATTERY TEST EQUIPMENT | BATTERY LOAD UNITS

Battery Load Units

Megger TORKEL 860 Battery Load Unit

• Ideal for battery discharge analysis in switchgear batteries and similar • Provided by Protec as a complete system with Megger BVM600; all required cabling and current probes with a preconfigured laptop computer with PowerDB • User adjustable voltage for 12V to 250V applications • Single unit loads to 110A, expandable with additional TORKEL 860s or TORKEL TXL870s Megger TORKEL 860 • Combine other load bank systems with the Megger XA-12990 Current Probe for total load monitoring and trending

Megger TORKEL 950 Battery Load Unit

• Ideal for battery discharge analysis in switchgear batteries and similar • Provided by Protec as a complete system with Megger BVM600; all required cabling and current probes with a preconfigured laptop computer with PowerDB • User adjustable voltage for systems up to 500V DC • High discharge capacity allows for shortened test times Megger TORKEL 950 • Single unit loads to 220A, expandable with additional TORKEL 950s or TXL units

Storage Battery Systems SBS-8400 Battery Capacity Tester

• Provided by Protec as a complete system with wireless BVM clamps • User selectable discharge mode: constant current/power/resistance • User adjustable voltage for 10V to 300V • Single unit loads to 120A, can be paralleled with other load banks to increase draw up to 600A Storage Battery Systems SBS-8400 • Four adjustable stop points and multiple alarm designs to intelligently control the discharge process

8400-600A DC battery voltage monitor clamps available for SBS units

4 (866) 352-5550 | protecequip.com BATTERY TEST EQUIPMENT | BATTERY VOLTAGE MONITORS

Battery Voltage Monitors

Megger BVM-300/600 Battery Voltage Monitor

• Used in conjunction with a load device, such as the TORKEL unit, and test data management software, such as PowerDB Lite • Daisy-chain design allows expandability up to 120 batteries Megger BVM-300/600 • Wide voltage range of 0 to 5V or 0 to 20V DC per BVM • Each unit is identical, eliminating complex battery connection charts and connecting multiple leads to individual battery terminals

(866) 352-5550 | protecequip.com 5 6 (866) 352-5550 | protecequip.com CABLE & BUS TEST EQUIPMENT | CABLE FAULT LOCATING TEST SETS

CABLE & BUS TEST EQUIPMENT

Overvoltage protection is critical to the long-term health of electrical power system components. It has a significant relationship to the electrical insulation that is integral to the construction of various items which make up the electrical power system. Dielectric test sets (High Potential) measure leakage current while applying a voltage at or above the insulation system’s operating level. Because it tends to be smaller, lighter and more portable than equivalent AC (50/60Hz) test equipment, DC high potential test sets have historically been preferred for field testing applications. However, as the industry has gained a better understanding of insulating materials and the impacts of our testing, it has been determined that DC dielectric testing is not always the best choice for every application. When in their normal in-service condition, the insulating materials that make up such a large part of our power system are being subjected to AC stresses. Therefore, it has become preferable to employ VLF (0.1Hz) (Very Low Frequency) technologies that are more practical for some field-testing applications. Testing at lower frequencies has enabled the use of more portable test equipment than what would be possible at power system frequencies. Additionally, the application of VLF technology has enabled the industry to utilize diagnostic tools such as Partial Discharge (PD) and Tangent Delta (TD) testing as predictive indicators regarding degradation of insulation and replacement planning in cable testing applications. In addition to cable tracing and fault locating test equipment, PD and TD testing are a valuable complement to a cable testing tool kit. Protec carries an inventory of test equipment for all your cable and bus testing needs.

Cable Fault Locating Test Sets

Amprobe AT-3000 Underground Cable Locator

• Indicates the depth of the traced object • Allows pinpointing the traced object • Three locating modes y Power y Radio y Transmitter Amprobe AT-3000 • Indicates strength of signal • Convenient in noisy environments

(866) 352-5550 | protecequip.com 7 CABLE & BUS TEST EQUIPMENT | CABLE FAULT LOCATING TEST SETS

Cable Fault Locating Test Sets

Amprobe AT-7030 Advanced Wire Tracer Kit

• Comprehensive kit includes all required components for tracing low voltage circuits in walls, ceilings, floors and corners • Innovative new antenna design and advanced signal processor provides the exact location and orientation of wires/circuits • Effective in both energized and de-energized applications Amprobe AT-7030 • Locates breakers and fuses • Pinpoints shorts and opens • High resolution color LCD displays active process and menu

Aqua-Tronics EG 3000/EG 3000 T Secondary Cable Fault Locator

• Used to locate all unshielded cable faults and sheath-to-ground faults • Can produce up to 3,000 volts of signal • Will not place any more voltage on the cable than is required to flash the fault • Battery powered, and comes with a car charger for charging on the go Aqua-Tronics EG 3000/ • Can be used in almost any type of weather or operating conditions EG 3000 T • EG 3000T unit adds cable tracing functionality

Aqua-Tronics S.D.A.D. Acoustic Fault Detector

• Excellent companion to CDS-2010 or VON XF25 for audible confirmation of fault location • Two channel system enables directional fault indication Aqua-Tronics S.D.A.D. • Bright backlit screen indicates distance to fault and fault depth • Includes stirrup probes for hard surfaces • Fault centering function quickly orients user to fault location • Simple operation for less familiar users

8 (866) 352-5550 | protecequip.com CABLE & BUS TEST EQUIPMENT | CABLE FAULT LOCATING TEST SETS

Cable Fault Locating Test Sets

Fluke Networks OptiFiber Pro Series 2 Optical Time Domain Reflectometer (OTDR)

• Full OTDR capability that certifies fiber performance based on industry standards or customer specifications • Compliant with ISO and TIA standards • Reduce network downtime by quickly and precisely identifying faults on all fiber types • Taptive user interface puts advanced data analysis, easy set-up and operation at the Fluke Networks fingertips of technicians of all skill levels OptiFiber Pro Series 2 • Test times as short as two seconds in quick test mode

High Voltage TDR1669 Time Domain Reflectometer

• Connects to thumper via standard BNC cable • Low voltage TDR mode enables cable end identification and velocity factor adjustment • On-board memory of 15 traces • Dual-trace overlays previous results • Measures cable ends to 48,000 ft High Voltage TDR1669 • Zooms to 4x on 3,000 ft range for precise event examination

HV Diagnostics EZ-Cable ID Single/Three-Phase Cable and Phasing Identification System

• Designed to avoid live cable cut-ins • Accurately and effectively identifies either single or three-phase cables anywhere (simultaneously) along the length of the cable • Effective for use on single or multi-conductor cable HV Diagnostics • Works in energized and de-energized applications, including high load-carrying EZ-Cable ID conductors • Available as a complete kit with receiver, transmitter and user’s choice of inductive clamp(s) or flexible coils

(866) 352-5550 | protecequip.com 9 CABLE & BUS TEST EQUIPMENT | CABLE FAULT LOCATING TEST SETS

Cable Fault Locating Test Sets

IUP Fault Wizard Cable Fault Locator

• Single piece high voltage thumper, ARC reflection TDR, DC hipot and low voltage TDR • Simplified transportation through common express carriers • Ideal for testing up to 15kV shielded cable • Locates faults to 10,000 ft (maximum capacitance of 7uF) • Variable impulse voltage (thump) for minimal cable damage IUP Fault Wizard • Variable velocity of propagation for precision adjustment to specific application

Megger CFL535G Advanced Dual Channel TDR

• Dual channel system measures two cables (or two conductors) simultaneously • Xpert mode evaluates cable under test and adjusts to ideal settings • One press of the XPert button identifies the first major event on the cable • Second pulse function identifies near (test) end faults Megger CFL535G • Manual control permits fine settings adjustments and full user control • Dual trace and dual cursors immediately identify distances

Megger L1050 Portable Cable Fault Locator

• Rugged, durable built to withstand the rigors of day-to-day field use • One-piece design that is lightweight and highly accurate • Picks up the signal at waist height, thus eliminating the need for awkward bending • Four types of locating methods • Operates at multiple frequencies from 815Hz to 82.315kHz Megger L1050

10 (866) 352-5550 | protecequip.com CABLE & BUS TEST EQUIPMENT | CABLE FAULT LOCATING TEST SETS

Cable Fault Locating Test Sets

Megger PFL22M1500 Portable Cable Fault Location System

• Portable, rugged fault locating system • HV insulation testing up to 20kV • 8/16kV, 1,500 Joules surge output • Multiple fault locating techniques y Pre-location y Pulse echo Megger PFL22M1500 y Arc reflection y Arc reflection plus y Differential arc reflection y Impulse current

Megger PFL40A Portable Cable Fault Location System • Portable, rugged fault locating system • HV insulation testing up to 40kV • 8/16/34kV, 2,000 or 1,500 Joules surge output • Multiple fault locating techniques: y Pre-location y Pulse echo Megger PFL40A y Arc reflection plus y Differential arc reflection y Impulse current y Voltage decay

Megger SG32-1500M Portable Fault Location System

y HV insulation testing up to 32kV y 16/32kV, 1,500 Joules surge output y Multiple fault locating techniques y Pre-location y Pinpoint y High-voltage module

Megger SG32-1500M

(866) 352-5550 | protecequip.com 11 CABLE & BUS TEST EQUIPMENT | CABLE FAULT LOCATING TEST SETS

Cable Fault Locating Test Sets

VON XF28-1960 Portable Arc Reflection Combination TDR Thumper

• Very high output power – 1960 Joules • 120V line powered or battery operated with on-board battery charger • Ideal for use on 35kV cables • On-board TDR (cable radar) automatically marks end of cable and fault location(s) with distances • A total fault location solution when paired with the Aqua-Tronics S.D.A.D. VON XF28-1960

12 (866) 352-5550 | protecequip.com CABLE & BUS TEST EQUIPMENT | HIPOTENTIAL TEST SETS

Hipotential Test Sets

High Voltage ALT-120/60 60kV and 120kV Power Frequency AC Hipot

• Side tap at 60kV provides 115mA capacity • Top tap at 120kV provides 58mA capacity • 120V / 25A input • Ideal for ISO phase bus testing, aerial lift devices and elevated platforms, most common dielectric withstand tests, and as a source voltage for apparatus PD testing High Voltage ALT-120/60 • Not suitable for cable testing

High Voltage PFT-301CM 30kV Power Frequency AC Hipot

• Convenient one-piece field portable design • Primary connected single range : 0 to 30 kV AC • Single range current meter: 0 to 40 mA AC • Transit protected meters prevent meter damage between test sites • 20 ft shielded output and return cables High Voltage PFT-301CM

High Voltage PFT-303 30kV Power Frequency AC Hipot

• Convenient one-piece field portable design • Secondary connected 2 range voltmeter: 0 to 15 / 30kV AC • 3 range current meter: 0 to 1mA AC with x1, x10, and x100 multipliers • 20 ft shielded output and return cables High Voltage PFT-303 • Gapped core transformer design for capacitive load compensation

(866) 352-5550 | protecequip.com 13 CABLE & BUS TEST EQUIPMENT | HIPOTENTIAL TEST SETS

Hipotential Test Sets

High Voltage PFT-503CM 50kV Power Frequency AC Hipot

• Convenient one-piece field portable design • Secondary connected 2 range voltmeter: 0 to 15 / 30kV AC • 3 range current meter: 0 to 1mA AC with x1, x10, and x100 multipliers • Guard/ground circuit for accurate leakage current measurement High Voltage PFT-503CM • Gapped core transformer design for capacitive load compensation

High Voltage PFT-652CM 65kV Power Frequency AC Hipot

• Convenient two-piece field portable design • Secondary connected 2 range voltmeter: 0 to 32.5 / 65kV AC • 3 range current meter: 0 to 1mA AC with x1, x10, and x100 multipliers • Transit protected meters prevent meter damage between test sites High Voltage PFT-652CM • Guard/ground circuit for accurate leakage current measurement

High Voltage PTS-75/PTS-80 75kV and 80kV DC High Voltage Test Set and

• 5 range current/megohm meter for accurate leakage current • Megohm readings at any output voltage up to 7.5 / 8 teraohms • Full-wave bridge rectifier • Internal HV Shorting Solenoid with discharge resistors • Automatic transit protected meters with anti-static glass face

High Voltage PTS-75/ PTS-80

14 (866) 352-5550 | protecequip.com CABLE & BUS TEST EQUIPMENT | HIPOTENTIAL TEST SETS

Hipotential Test Sets

High Voltage PTS-130 130kV DC Hipot and Megohmmeter

• 130kV output voltage at 10mA • Continuously adjustable output voltage • Functional two piece design • High voltage tank is approximately 82 lbs, controller is approximately 35 lbs High Voltage PTS-130 • Dual range voltage meter scaled 0 to 70/130

High Voltage PTS-200 200kV DC Hipot and Megohmmeter

• 200kV output voltage at 5mA • Continuously adjustable output voltage • High voltage tank is approximately 150 lbs, controller is approximately 35 lbs • Dual range voltage meter scaled 0 to 80/200

High Voltage PTS-200 • Microamp and megohm meter scales for both leakage current and resistance measurements

High Voltage VLF-4022CM 40kV High Load Capacity Portable VLF Hipot

• Output voltage is 40kV peak at 5.5mA max • Adjustable output frequency of 0.1Hz, 0.05Hz, or 0.02Hz (sinusoidal) • Capable of testing 35kV cable up to a maximum distance of 10 miles • Metering includes voltmeter ±0 to 60k VAC peak charging current meter High Voltage VLF-4022CM • 0 to 100mA peak, and load 0 to 6μF • Two piece design; controller is approximately 75 lbs and the high voltage tank is approximately 120 lbs

(866) 352-5550 | protecequip.com 15 CABLE & BUS TEST EQUIPMENT | HIPOTENTIAL TEST SETS

Hipotential Test Sets

High Voltage VLF-34E/VLF-65E 34kV/65kV VLF Hipot

• 34kV / 65kV output voltage • 120V input voltage • Adjustable output frequency • 5μF load @ 0.02Hz

High Voltage VLF-34E/VLF-65E

HV Diagnostics PDTD60/PDTD120 60kV and 120kV Partial Discharge and Tan Delta System

• 60kV / 120kV VLF output voltage • 120V input voltage • 2 piece unit • Suitable for 69kV cable (PDTD60) and 35kV cable (PDTD120) HV Diagnostics • Total weight 347 lbs (PDTD60) and 90 lbs (PDTD120) PDTD60/PDTD120

Phenix 6CP100/50-10 50kV & 100kV AC Dielectric Test Set

• Ideal high voltage source for PD measurements using the ICM Flex for off-line partial discharge apparatus testing; not suitable for cable testing • Minimal partial discharge – less than 4pC at 100kV and less than 3pC at 80kV • Two-piece design with hand truck mount for controller and tank improves portability • Side tap at 50kV provides 200mA capacity; top tap at 100kV provides 100mA capacity Phenix 6CP100/50-10 • 230V input, and adjustable overload circuit

16 (866) 352-5550 | protecequip.com CABLE & BUS TEST EQUIPMENT | HIPOTENTIAL TEST SETS

Hipotential Test Sets

HV Diagnostics HVA VLF/DC High Voltage Test Sets 28kV, 30kV, 34kV, 45kV, 60kV, 90kV and 120kV Hipots for VLF Withstand Testing, Tan Delta (Dissipation Factor) and Off-Line Partial Discharge Cable Testing

• Compact, single-piece construction for improved portability and logistics compared to AC or DC hipots with similar cable testing capability • Simple and intuitive menu driven user interface HV Diagnostics HVA28TD • Consistent controls, menus and connections on each model ensures minimal learning curve from instrument to instrument • Appropriate for testing cables, capacitors, switchgear, transformers, rotating equipment, insulators and bushings • Meets requirements of a Type I withstand testing according to IEEE 400.2 and other national and international standards • User specified or automatically adjusted output frequency according to easuredm capacitance (1Hz to 0.01Hz in 0.01Hz steps) • Sinusoidal, cosine rectangular, or DC output waveform • True symmetrical sinusoidal, load independent output waveforms across full load range HV Diagnostics HVA34 • Short circuit protection with active arc management • Digital metering displays voltage (RMS or Peak), capacitance, resistance, elapsed time, and flashover voltage • Storage of test results and test sequences (test plans) in internal memory and on-board USB port for USB flash drive • HVA control center software produces professional reports • Keyed safety interlock and emergency shutdown • Seamless integration with HV Diagnostics tan delta measurement systems, HV diagnostics partial discharge analysis equipment and Power Diagnostix ICMFlex

HV Diagnostics HVA120 • HVA28TD model adds on-board tan delta measurement system

HVA Model Peak Voltage RMS Voltage Acceptance Maintenance

HVA28TD 28kV 20kV Up to 15kV Up to 20kV

HVA30 30kV 22kV Up to 16kV Up to 22kV

HVA34 34kV 24kV Up to 15kV Up to 25kV

HVA34TD 34kV 24kV Up to 15kV Up to 25kV

HVA45TD 45kV 32kV Up to 25kV Up to 30kV

HVA60 60kV 44kV Up to 35kV Up to 46kV

HVA90 90kV 64kV Up to 46kV Up to 69kV

HVA120 120kV 85kV Up to 69kV Up to 69kV

(866) 352-5550 | protecequip.com 17 CABLE & BUS TEST EQUIPMENT | PARTIAL DISCHARGE (ON-LINE) TEST SETS

Partial Discharge (On-Line) Test Sets

EA Technology CableData Collector Partial Discharge Analyzer

• Identifies and allows you to report on PD activity in live MV/HV cable networks • Detects and measures PD activity in single and three-phase cables • Works with all insulated cable types • Quick assessment of a large number of cables to build up a total view of the EA Technology CableData condition of a distribution cable network Collector • Quickly highlights cables that require more detailed analysis techniques

EA Technology UltraTEV Plus2 Multifunction Partial Discharge Analyzer

• Quickly identify presence and severity of PD in electrical apparatus • Baselines PD activity to direct maintenance activities • Measures surface PD as numerical dB values and measures internal partial discharge as Transient Earth Voltages (TEV) values • Automatically grades condition of TEV and ultrasonic values for immediate analysis EA Technology UltraTEV Plus2

Ofil Systems DayCor Superb-OD Corona Camera

• Accurately pinpoints sources of corona, partial discharge, micro arcing and arcing that may lead to audio noise, radio/TV interference and electrical mechanical failures • An anatomically form-fitted harness distributes the camera’s weight and allows extended inspection intervals • Built-in recording, playback and storing of high-resolution video clips with voice annotations and still pictures Ofil Systems DayCor Superb-OD • Bi-spectral solar blind UV-visible camera allowing operation in full daylight

18 (866) 352-5550 | protecequip.com CABLE & BUS TEST EQUIPMENT | PARTIAL DISCHARGE (ON-LINE) TEST SETS

Partial Discharge (On-Line) Test Sets

PMDT PDetector Handheld Partial Discharge Detector

• One instrument solution for a wide variety of substation apparatus and cables • Represents the latest technology in both electromagnetic and acoustical sensors to identify and find PD in energized substations and switchgear • Available with Ultra High Frequency (UHF), Transient Earth Voltage (TEV), High Frequency CT (HFCT or RFCT), acoustical contact, airborne acoustic sensors • Sensors are wireless where appropriate so operator can maintain safe approach distances • Hand-held instrument is small, lightweight and portable • Short learning curve – operators can become proficient in minutes • Instrument identifies specific PD type: void, corona, surface, particle or floating PMDT PDetector electrode • Phase resolved display documents PD over the sine wave to ensure measured PD is from the circuit under test and not background or nominal noise • PRPD (2D) and PRPS (3D) compare UHF and HFCT signals to local power signal • AE and ultrasonic values displayed as RMS, peak, frequency content (x1 and x2), phase, pulse and wave spectrum • Wireless line synchronization is accomplished wirelessly using the instrument charger • Suitable for use on power cables, transformers, GIS, switchgear and other substation apparatus • Available with PDetector software to catalog and trend results and produce professional reports • Programmable alarms document exact PD signature so reports are clear to those unfamiliar with PD testing • Software exports results to Excel or PDF • On-board RFID asset tagging and intelligent patrol functions automatically document the specific substation assets being tested

(866) 352-5550 | protecequip.com 19 CABLE & BUS TEST EQUIPMENT | PARTIAL DISCHARGE (ON-LINE / OFF-LINE) TEST SETS

Partial Discharge (On-Line) Test Sets

Sonel UV-260 Corona Camera

• High sensitivity to UV signals • Precise location of corona-emitting sources • UV events alarm and counter • Still image capture and review • Built-in GPS documents test location Sonel UV-260 • UV-260 PC software for reports

Partial Discharge (Off-Line) Test Sets

HV Diagnostics High Voltage Sources for Off-Line PD Analysis

Output Volt- Total Typical Model Input Pieces age Weight Application HVA34 34kV VLF 120V 1 44 Lbs 15kV Cable

HVA60 60kV VLF 120V 1 126 Lbs 35kV Cable

HV Diagnostics PDTD120 HVA90 90kV VLF 120V 1 280 Lbs 46kV Cable HVA120 120kV VLF 240V 1 436 Lbs 69kV Cable

PDTD60 60kV VLF 120V 2 347 Lbs 69kV Cable

PDTD120 120kV VLF 120V 2 90 Lbs 35kV Cable

20 (866) 352-5550 | protecequip.com CABLE & BUS TEST EQUIPMENT | TAN DELTA TEST SETS

Tan Delta Test Sets

High Voltage Tan Delta Measurement Systems 36kV and 60kV Tan Delta (Dissipation Factor) Test Systems

HV Diagnostics Tan Delta Measurement Systems 30kV, 60kV, 62kV and 90kV Tan Delta (Dissipation Factor) Test Systems

High Voltage TD-34E • High voltage tan delta measurement system for testing XLPE, PE, EPR, PILC, etc. • Provides Type II diagnostic testing and meets requirements of IEEE 400.2 and other national and international standard • Capable of working with many VLF AC instruments • Full report generating software • Compact and battery operated • Simple and convenient setup • Solid state, air insulated design • Wireless data transmission via Bluetooth • Protec provides TD Control Center software, which displays individual voltage/ waveform, loss angle data and plots tan delta curve • Real time display of actual waveform output and data HV Diagnostics TD60-MC • Visual indication of PD levels with LED indicators

Manufacturer Model Peak Voltage RMS Voltage Weight Dimensions (LxW)

HV Diagnostics TD30 30kV 1 to 23kV 7 Lbs 9.5" x 3.5"

High Voltage TD-34E 36kV 1 to 25kV 7 Lbs 9.5" x 3.5"

HV Diagnostics TD60 60kV 1 to 44kV 11 Lbs 18" x 5"

HV Diagnostics TD60-MC 62kV 1 to 44kV 11 Lbs 26" x 5"

HV Diagnostics TD90-MC 90kV 1 to 64kV 24 Lbs 26" x 5"

(866) 352-5550 | protecequip.com 21 22 (866) 352-5550 | protecequip.com ELECTRICAL SAFETY

ELECTRICAL SAFETY

Electrical current exposes workers to a serious, widespread workplace hazard. Many workers are exposed to electrical energy while completing their daily responsibilities, and many are unaware of the potential electrical hazards present in their work environment, making them more vulnerable to the danger of electrocution. A variety of possible solutions may be implemented to reduce or eliminate the risk of injury associated with electrical work. Examples of solutions include the use of insulation, guarding, grounding, electrical protective devices and safe work practices. Protec carries and inventory of test equipment for all your electrical safety needs.

AEMC 275HVD Non-Contact Voltage Detector

• Works on unshielded cables only • Range of detection: 80V to 275kV • Eight switch selectable voltage sensitivity ranges • Audible and visual indication of live voltage • Designed for use with hot sticks incorporating a shotgun adapter AEMC 275HVD • Powered by three standard alkaline C cell batteries

Bender LT3000 Line Isolation Monitor

• Tests line isolation monitors and ground fault circuit interrupters • Operates on system voltages from 100VAC to 240VAC • Large LCD display • Overload protection with automatic reset • System leakage measurements Bender LT3000 • Twist-to-lock adapter

(866) 352-5550 | protecequip.com 23 ELECTRICAL SAFETY

Electrical Safety

Ground Cluster Available in Multiple Configurations

• Typical 15 ft 4/0 cables with connections for A phase, B phase, C phase and ground • Clamps adjustable with a hook type hotstick • Available with duckbill clamps

Ground Cluster

RKI GX-2009 Gas Detector

• Simultaneous detection of LEL, O2, H2S, and CO • Smallest/lightest four gas monitor on the market • Three visual alarms and a vibration alarm • IP-67 water-resistant design RKI GX-2009 • Up to 20 hours of operation

24 (866) 352-5550 | protecequip.com GAS & SF6 ANALYSIS

GAS & SF6 ANALYSIS

Electrical insulation serves a critical role as it relates to the safe transmission and distribution of electricity. These insulating materials often become an integral part of electrical apparatus and can be dependent on a variety of criteria including voltage level, insulating qualities, physical restrictions and the application of the electrical apparatus being considered. In high voltage applications sulfur hexafluoride (SF6) is an inorganic, non-flammable, non-toxic gas that is an excellent electrical insulator. However, the purity of the gas becomes critical concern for applications in high voltage insulation. If the purity of the gas becomes compromised, then the entire circuit can be at risk in addition to it becoming a safety concern for anyone in close proximity to the circuit if the insulation were to fail. The importance of monitoring the purity of this gas becomes clearer as we consider the potential decomposition of the gas due to exposure to high energy faults as well as the ingress of contaminants (such as moisture) into the insulating system. A regular testing and maintenance program of power system apparatus that utilize gas as an insulating medium would have to include tests that help to ensure that the gas is free of degradation or contamination. Protec maintains an inventory of gas and SF6 analysis equipment for all your needs.

DILO 3-027-R002 SF6 Volume Percentage (Purity) Analyzer

• Simple operation and logical controls • Indicates SF6 volume percentage (SF6 purity by volume) independent of atmospheric pressure and location • Accuracy of +/- 1% by volume for 0-100% SF6 in SF6/N2 DILO 3-027-R002 • Available with DN20/DN8 self-sealing couplings and DILO coupling DN20

DILO 3-033-R002 LeakPointer SF6 Leak Detector

• Handheld • Automatic switching over to levels of sensitivity • Detection of SF6 leaks up to 5g/year • Battery-operated

DILO 3-033-R002 LeakPointer

(866) 352-5550 | protecequip.com 25 GAS & SF6 ANALYSIS

Gas & SF6 Analysis

DILO 3-033-R200 LeakSpy SF6 Leak Detector

• Detection of SF6 leakages up to 3g/year • No cross sensitivity to moisture and most volatile organic compounds (VOCs) • A shoulder belt facilitates mobile and ergonomic working • Battery-operated with life of 12 hours DILO 3-033-R200 LeakSpy

DILO 3-038-R032 NP SF6 and CF4 Analyzer

• Determines SF6 and CF4 moisture content, purity (density) and SO2 • Quick test results, less than seven minutes typical • Gas outlet allows for collection of exhaust gases for emissions-free testing and portable and lightweight bench top configuration DILO 3-038-R032 NP • Stores data for later review on the instrument or download to a USB port and user adjustable limit values • Available with a DILO SF6 Analyzer Adaptor Kit

DILO 3-038R-R303 SF6 Analyzer with Recirculation

• Determines SF6 moisture content, purity (density) and SO2 • Intuitive menu driven interface steps operator through testing with touchscreen control • On-board SF6 storage vessel and pump back to test specimen ensures zero emissions operation • Stores data for later review on the instrument or download to a USB port and user adjustable limit values DILO 3-038R-R303 • Available with a DILO SF6 Analyzer Adaptor Kit

26 (866) 352-5550 | protecequip.com GAS & SF6 ANALYSIS

Gas & SF6 Analysis

DILO SF6 Analyzer Adapter Kit Regulator, Fitting and Adapter Kit for SF6 Analysis

• Everything required to connect an SF6 analyzer to your apparatus • Includes: DILO SF6 Analyzer y SF6 regulator assembly Adapter Kit y SN8 self-sealing male to 3/8” male NPT y 1/4” FJIC y 3/8” JFIC y Siemens Aeroquip/SPS y DN20 self-sealing male to 1-1/4” parker (ITE, Westinghouse, ABB PA) y DN20 self-sealing male to 3/8” female NPT y DN80 self-sealing male to 1” male NPT y DN20 self-sealing male to malmquist (ABB PM)

DILO SF6 HB 120A Cylinder Heating Blanket

• Power: 500W • Velcro retention strap • Thermostatic safety controlled • Maximum temperature capability will not affect SF6 • Dimensions: 28" x 10" DILO SF6 HB 120A (Blanket Only)

Fluke Ti450 SF6 Gas Detector

• Detects and pinpoints the exact location of the SF6 leak • Quick entry/exit button allowing quick toggling between gas imaging and infrared mode • 320 X 240 resolution for gas images • Fluke Connect compatibility

Fluke Ti450

(866) 352-5550 | protecequip.com 27 GAS & SF6 ANALYSIS

Gas & SF6 Analysis

RH Systems 973-SF6 Gas Analyzer

• Specifically designed for measurement of humidity and SF6 purity in gas insulated switchgear systems • Humidity measurement data is displayed in ppmv, ppmw and dew/frost point at either system pressure or standard pressure RH Systems 973-SF6 • Purity measurement is displayed directly in % volume SF6 • Both the humidity and purity measurements utilize accurate and reliable condensation techniques • Equipped with a gas recovery system that stores the sampled gas during the measurement process in its internal storage tank. • Range: -55°C…+20°C DP, accuracy is 0.5 deg of reading • Dew/Frost Point results at SF6 compartment or standard pressure

Wika GA10 SF6 Gas Analyzer

• Determines SF6 moisture content, purity (density) and SO2 • Intuitive menu driven interface steps operator through testing • Stores data for later retrieval on instrument or download to Wika’s SF6 Reviewer software Wika GA10 • Measurement validation in accordance with CIGRE, IEC and other national and international standards • Available with a DILO SF6 Analyzer Adaptor Kit

28 (866) 352-5550 | protecequip.com GROUND RESISTIVITY

GROUND RESISTIVITY

Transformers are electrical devices consisting of two or more coils of wire used to transfer electrical energy by means of a changing magnetic field. A transformer is basically a very simple static (or stationary) electro-magnetic passive electrical device working on the principle of Faraday’s law of induction by converting electrical energy from one value to another. If maintained and serviced regularly, transformers can be extremely reliable and provide service for long periods of time. That being said, transformers are also the single most costly item in any substation. To protect against failures that can result in costly repairs and long periods of downtime, a proper testing, diagnostic, and maintenance routine is recommended. The best insurance against transformer failure is to ensure that they are preventatively maintained and serviced. Protec provides a complete line of rental equipment for quick and accurate ground resistivity testing and diagnostics.

AEMC 6416 Clamp On Ground Resistance Tester

• Measures ground rod and grid resistance without driving temporary ground rods or running leads • Verifies quality of grounding connections/bonds and continuity of ground loops • Jaw opening of 1-1/2”

AEMC 6416 • Provides ground voltage indication and warns of possible unsafe conditions

AEMC 3711/3731 Clamp On Ground Resistance Test Set

• Measure ground rod and grid resistance without driving temporary ground rods • Verifies quality of grounding connections/bonds and continuity of ground loops • Jaw opening of 1-1/4” • AEMC 3731 includes a display hold function AEMC 3711/3731

(866) 352-5550 | protecequip.com 29 GROUND RESISTIVITY

Ground Resistivity

Bender LT3000 Line Isolation Monitor

• Tests line isolation monitors and ground fault circuit interrupters • Operates on system voltages from 100VAC to 240VAC • Large LCD display • Overload protection with automatic reset • System leakage measurements Bender LT3000 • Twist-to-lock adapter

Fluke 1625 Multifunction Geo Earth Ground Test System

• Performs earth ground loop resistances using clamps only (stakeless testing), Fall-of- Potential, earth resistivity, and selective testing (or attached rod technique) • Automatic frequency control mitigates interference • Adjustable limits for immediate results verification Fluke 1625 • Available as a complete kit with leads current probes, and stakes

Megger DET2/2 Digital Ground Resistance Tester

• Ideal for large ground systems or applications requiring long lead runs • High resolution (1mΩ) and high accuracy • Performs fall-of-potential, soil resistivity, and point-to-point tests • User adjustable test voltage to 50V (max) • User adjustable wideband test frequency to mitigate interference Megger DET2/2 • Available with ground test kit complete with leads and ground rods

30 (866) 352-5550 | protecequip.com GROUND RESISTIVITY

Ground Resistivity

Megger DET24C Ground Resistance Clamp Tester

• Measures ground resistance from 0.05 Ohms to 1,500 Ohms • Measures true RMS ground leakage current from 0.5mA RMS to 35mA RMS • Elliptical clamp shape improves access to earth cables and straps up to 50mm • Automatic self-calibration • Automatic ranging Megger DET24C • Compatible with PowerDB/PowerDB Lite

Megger DET3TC/ICLAMP 3 Terminal Ground Resistance Tester

• Selectable test voltages (25V or 50V) • 0.01Ω to 2,000Ω range • Available with leads and temporary ground rods • Automatic noise check and rejection to 40V peak-to-peak Megger DET3TC • Measure leakage current from 0.5mA to 19.9A • Enables testing of on-site grounds separately without removing utility connection

Use with Megger ICLAMP for attached rod technique testing

Megger ICLAMP

Megger DET4TCR2 4 Terminal Ground Resistance Tester

• Two-point, three-point and four-point testing • Stakeless (clamp-on) testing capability • Multiple user selectable test frequencies

Megger DET4TCR2 • Resistance measurement range to 200,000 Ohms • Simple one-button operation • Rechargeable battery powered

(866) 352-5550 | protecequip.com 31 GROUND RESISTIVITY

Ground Resistivity

Megger DET62D Digital Earth Tester

• Three terminal measurement for ground electrode testing • Simple, fully automatic operation • Rugged weatherproof case Megger DET62D • Large clear LCD screen • Superior noise rejection to 40V • High tolerance to spike resistance

Omicron CPC 100 / CP CU1 Multifunctional Primary Test System

• Measures line impedance and K-factor on overhead lines and power cables • Determines ground impedance and touch-and-step potential on large systems • Available with the GB1 grounding unit to ensure user safety Omicron CPC 100 • Determines true test values by power line injection method • HGT1 provides simple and accurate touch-and-step potential measurements • Measures reduction factor on ground wires and cable shields • Complies with EN 50522 and IEEE 80/81 requirements • Results unaffected by input power frequency • Automatically records results with included software • Couples power lines into signal cables and provides mutual coupling of parallel overhead lines • Selective frequency measurement and digital filtering ensures laboratory grade accuracy • Lightweight and one-person portable system Omicron CP CU1 • Intuitive reporting and assessment with dedicated templates • Available as a complete system including CPC 100 and CP CU1, Rogowski coils, handheld GPS device, GB1 and HGT1 • More CPC-100 accessories available on pages 33, 49 and 111

32 (866) 352-5550 | protecequip.com GROUND RESISTIVITY

Ground Resistivity

Omicron CP TD12 Capacitance and Power/Dissipation Factor Module

• Includes a high-voltage source, reference capacitor and measurement electronics • Generates output voltages up to 12kV, currents up to 300mA • Achieves laboratory precision, even in environments with strong interferences Omicron CP TD12 • Accessory for the Omicron TESTRANO 600, CPC 100 or CPC 80

(866) 352-5550 | protecequip.com 33 34 (866) 352-5550 | protecequip.com HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | CAPACITANCE & INDUCTANCE TEST SETS

HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION

Circuit breakers have historically functioned as the protective muscle of the electrical power system. Their effectiveness in performing their job depends on the unique application, design and operating condition. While protective guardians vary widely regarding design and construction, they continue to share in the basic functionality of conducting or interrupting the flow of electricity. Additionally, their ability to perform these functions in concert with their intended design is subject to mechanical, electrical and environmental impacts. Like an insurance policy that fails to protect, a circuit breaker that does not serve its protective purpose is of little value. When something occurs resulting in unexpected fault conditions, we need to be able to count on circuit breakers to perform as intended. Testing and maintenance program will help to provide confidence that the electrical system is in good health. Protec carries and inventory of test equipment for all your high voltage circuit breaker and sub station testing needs.

Capacitance & Inductance Test Sets

B&K Precision 885 LCR/ESR Meter

• Dual LCD display • Fully automatic/manual selection • DC resistance measurement • Measurement parameters: Z, L, C, DCR, ESR, D, Q and q • Infrared RS-232 interface capability B&K Precision 885

ABB CB-2000 Portable Capacitance Meter

• Compact self-contained capacitor bank analysis • Permits measurements of individual capacitors without breaking connections • On-board memory can be transferred to a PC for report generation or data trending and analysis • Data from PC can be transferred to CB-2000 for on the spot analysis

ABB CB-2000 • Available with large, wide-jaw current probe to accommodate a wide variety of capacitor bushings

(866) 352-5550 | protecequip.com 35 HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | CIRCUIT BREAKER TIMING TEST SETS

Circuit Breaker Timing Test Sets

Doble TDR9100/TDR900 Circuit Breaker Test System

• Includes four breaks per phase, three transducer connections and six event channels • Operated by T-Doble software provided on a preconfigured laptop or Doble DUC • Provides main contact timing, travel/motion, resistance and capacitance measurements • Expandable with two or three systems for multiple contact applications Doble TDR9100/TDR900 • Detects main contact and resistor contact timing errors

Omicron CIBANO 500 3-in-1 Circuit Breaker Test System

• Combines a circuit breaker timer, 100A static DLRO, minimum pick up and undervoltage source, and a coil and motor power supply in one instrument • Unique cabling connection system dramatically reduces connection time and effort • Transducer node CB TN3 provides motion/velocity input from most digital or analog transducers Omicron CIBANO 500 • Contact module CB MC2 Provides convenience – one connection to primary breaker contacts for all tests; only one cable connection to instrument • Combined with MC2 and CB TN3, fully analyzes performance by measuring • Main contact and resistor contact timing, stroke, velocity, over-travel, bounce back and contact wipes • Operated by primary test manager software which produces a comprehensive report with all tests

Omicron CB TN3

Vanguard CT-6500 Circuit Breaker Timer Analyzer

• Fully analyzes performance by measuring main contact and resistor contact timing, stroke, velocity, over-travel, bounce back and contact wipes • Contact and motion/travel analyzed on all breaker operations: open, close, open- close and close-open • Operates with insertion resistors up to 7,000Ω Vanguard CT-6500 • Trip/close coil current monitoring capabilities • Monitors all three-breaker poles simultaneously

36 (866) 352-5550 | protecequip.com HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | CIRCUIT BREAKER TIMING TEST SETS

Circuit Breaker Timing Test Sets

Vanguard CT-7000 S3/S6 Circuit Breaker Timer and Travel Analyzer

• Fully analyzes performance by measuring main contact and resistor contact timing, stroke, velocity, over-travel, bounce back and contact wipes • Contact and motion/travel analyzed on all breaker operations: open, close, open-close and close-open Vanguard CT-7000 S3/S6 • Initiates all breaker operations • Monitors all three-breaker poles simultaneously • Available with three or six timing channels

Vanguard CT-8000 S3 Circuit Breaker Timer Analyzer

• Fully analyzes performance by measuring main contact and resistor contact timing, stroke, velocity, over-travel, bounce back and contact wipes • Integrated “on-line timing” or first trip analysis • Initiates all breaker operations Vanguard CT-8000 S3 • Trip/close coil current monitoring capabilities • Monitors all three breaker poles simultaneously

(866) 352-5550 | protecequip.com 37 HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | DIGITAL LOW RESISTANCE OHMMETERS

Digital Low Resistance Ohmmeters

AEMC 6240/6250 10A Micro-Ohmmeter

• Battery operated, light weight and compact design • User selectable test current and resistance ranges • 6250 model adds internal storage of readings with data storage and analysis software included • Includes temperature compensation and user selectable resistive or inductive materials measurement AEMC 6240/6250

Megger DLRO2 - 2A Hand-Held Low Resistance Ohmmeter

• New Difference Meter for quick data comparisons • Uses long leads at 1A without compromising test speed • Safely test the resistance of inductive loads at 1A • >600V active protection against inadvertent live connections without blowing a fuse

Megger DLRO2

Megger DLRO10HD 10A Digital Low Resistance Ohmmeter (DLRO)

• Internal storage of test data for download or printing on site with optional printer • Lightweight compact design Included heavy-duty alligator clamp or optional C-clamps (33 lbs) • Operational ingress protection is IP54 (battery power only) ensuring protection from the elements Megger DLRO10HD • Rotary mode switch with bidirectional (current reversal with averaging cancels thermal EMFs), unidirectional, automatic, continuous and inductive modes

38 (866) 352-5550 | protecequip.com HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | DIGITAL LOW RESISTANCE OHMMETERS

Digital Low Resistance Ohmmeters

Megger DLRO200-115 200A Digital Low Resistance Ohmmeter (DLRO)

• Lightweight and compact design • Stores test records in on-board memory or to USB flash drive • 1A to 200A test current • Heavy duty and field rugged

Megger DLRO200-115

Megger DLRO600 600A Digital Low Resistance Ohmmeter (DLRO)

• Test currents from 10A to 600A • Internal storage of test data for download or printing on site with optional printer • Lightweight compact design (33 lbs) • Includes heavy-duty alligator clamp or optional C-clamps Megger DLRO600

Megger MOM2 200A Digital Low Resistance Ohmmeter (DLRO)

• Lightweight and compact design • Stores test records in on-board memory or to USB flash drive • 1A to 200A test current • Heavy-duty and field rugged

Megger MOM2

(866) 352-5550 | protecequip.com 39 HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | DIGITAL LOW RESISTANCE OHMMETERS

Digital Low Resistance Ohmmeters

Raytech Micro Centurion II MC-2 200A Micro Ohm Meter

• Selectable output from 10A to 200A • High precision – measurements from 0.01μΩ to 20μΩ with resolution of 0.01μΩ • Internal memory records 2,000 test results • Heavy-duty and field rugged

Raytech Micro Centurion II MC-2

Raytech Micro Junior 2 10A Micro Ohm Meter

• Automated measurement detection and storage modes • On-board printer • Automatic polarity reversal • Battery operated

Raytech Micro Junior 2

Vanguard Auto-Ohm 100 100A Micro-Ohmmeter

• Selectable output from 10A to 100A • Programmable current rise and fall rates • Auto-test mode permits applying sense leads across points of interest

Vanguard Auto-Ohm 100

40 (866) 352-5550 | protecequip.com HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | DIGITAL LOW RESISTANCE OHMMETERS

Digital Low Resistance Ohmmeters

Vanguard Auto-Ohm 200 S3 200A Micro-Ohmmeter

• Lightweight and compact design (17 lbs) • On-board QWERTY Keyboard • Stores test records in on-board memory or to USB flash drive • 1A to 200A test current Vanguard Auto-Ohm 200 S3 • Programmable current rise and fall rates • Auto-test mode permits applying sense leads across points of interest

(866) 352-5550 | protecequip.com 41 HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | HIPOTENTIAL TEST SETS

Hipotential Test Sets

High Voltage ALT-120/60 60kV and 120kV Power Frequency AC Hipot

• Side tap at 60kV provides 115mA capacity • Top tap at 120kV provides 58mA capacity • 120V / 25A input • Ideal for ISO phase bus testing, aerial lift devices and elevated platforms, most common dielectric withstand tests, and as a source voltage for apparatus PD testing High Voltage ALT-120/60 • Not suitable for cable testing

High Voltage PFT-301CM 30kV Power Frequency AC Hipot

• Convenient one-piece field portable design • Primary connected single range voltmeter: 0 to 30 kV AC • Single range current meter: 0 to 40 mA AC • Transit protected meters prevent meter damage between test sites • 20 ft shielded output and return cables High Voltage PFT-301CM

High Voltage PFT-303 30kV Power Frequency AC Hipot

• Convenient one-piece field portable design • Secondary connected 2 range voltmeter: 0 to 15 / 30kV AC • 3 range current meter: 0 to 1mA AC with x1, x10, and x100 multipliers • 20 ft shielded output and return cables High Voltage PFT-303 • Gapped core transformer design for capacitive load compensation

42 (866) 352-5550 | protecequip.com HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | HIPOTENTIAL TEST SETS

Hipotential Test Sets

High Voltage PFT-503CM 50kV Power Frequency AC Hipot

• Convenient one-piece field portable design • Secondary connected 2 range voltmeter: 0 to 15 / 30kV AC • 3 range current meter: 0 to 1mA AC with x1, x10, and x100 multipliers • Guard/ground circuit for accurate leakage current measurement High Voltage PFT-503CM • Gapped core transformer design for capacitive load compensation

High Voltage PFT-652CM 65kV Power Frequency AC Hipot

• Convenient two-piece field portable design • Secondary connected 2 range voltmeter: 0 to 32.5 / 65kV AC • 3 range current meter: 0 to 1mA AC with x1, x10, and x100 multipliers High Voltage PFT-652CM • Transit protected meters prevent meter damage between test sites • Guard/ground circuit for accurate leakage current measurement

High Voltage PTS-75/PTS-80 75kV and 80kV DC High Voltage Test Set and Megohmmeter

• Performs repeatable, accurate measurement of breakdown voltage of insulating oils • Three rates of rise: 500V / 2,000V / 3,000V per second • Arc detection with automatic shutdown and measurement hold • DTS-60A adds full programming and automation with on-board printer, internal results storage and RS-232 interface, user defined test sequences and temperature sensor

High Voltage PTS-75/ PTS-80

(866) 352-5550 | protecequip.com 43 HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | HIPOTENTIAL TEST SETS

Hipotential Test Sets

High Voltage PTS-130 130kV DC Hipot and Megohmmeter

• 130kV output voltage at 10mA • Continuously adjustable output voltage • Functional two piece design • High voltage tank is approximately 82 lbs, controller is approximately 35 lbs High Voltage PTS-130 • Dual range voltage meter scaled 0 to 70/130kV

High Voltage PTS-200 200kV DC Hipot and Megohmmeter

• 200kV output voltage at 5mA • Continuously adjustable output voltage • High voltage tank is approximately 150 lbs, controller is approximately 35 lbs • Dual range voltage meter scaled 0 to 80/200kV • Microamp and megohm meter scales for both leakage current and resistance High Voltage PTS-200 measurements

High Voltage VLF-4022CM 40kV High Load Capacity Portable VLF Hipot

• Output voltage is 40kV peak at 5.5mA max • Adjustable output frequency of 0.1Hz, 0.05Hz, or 0.02Hz (Sinusoidal) • Capable of testing 35kV cable up to a maximum distance of 10 miles • Metering includes voltmeter ±0 to 60k VAC peak, charging current meter High Voltage VLF-4022CM • 0 to 100mA peak, and load capacitance meter 0 to 6μF • Two piece design; controller is approximately 75 lbs and the high voltage tank is approximately 120 lbs

44 (866) 352-5550 | protecequip.com HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | HIPOTENTIAL TEST SETS

Hipotential Test Sets

High Voltage VLF-34E/VLF-65E 34kV/65kV VLF Hipot

• 34kV / 65kV output voltage • Adjustable output frequency • 5μF load @ 0.02Hz • 120V input voltage

High Voltage VLF-34E/VLF-65E

HV Diagnostics PDTD60/PDTD120 60kV and 120kV Partial Discharge and Tan Delta System

• 60kV / 120kV VLF output voltage • 120V input voltage • 2 piece unit • Suitable for 69kV cable (PDTD60) and 35kV cable (PDTD120) HV Diagnostics PDTD60/PDTD120 • Total weight 347 lbs (PDTD60) and 90 lbs (PDTD120)

Phenix 6CP100/50-10 50kV & 100kV AC Dielectric Test Set

• Ideal high voltage source for PD measurements using the ICM Flex for off-line partial discharge apparatus testing; not suitable for cable testing • Minimal partial discharge – less than 4pC at 100kV and less than 3pC at 80kV • Two-piece design with hand truck mount for controller and tank improves portability • Side tap at 50kV provides 200mA capacity; top tap at 100kV provides 100mA capacity Phenix 6CP100/50-10 • 230V input, and adjustable overload circuit

(866) 352-5550 | protecequip.com 45 HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | HIPOTENTIAL TEST SETS

Hipotential Test Sets

HV Diagnostics HVA High Voltage Test Sets 28kV, 30kV, 34kV, 45kV, 60kV, 90kV and 120kV Hipots for VLF Withstand Testing, Tan Delta (Dissipation Factor) and Off-Line Partial Discharge Cable Testing

• Compact, single-piece construction for improved portability and logistics compared to AC or DC hipots with similar cable testing capability • Simple and intuitive menu driven user interface HV Diagnostics HVA28TD • Consistent controls, menus and connections on each model ensures minimal learning curve from instrument to instrument • Appropriate for testing cables, capacitors, switchgear, transformers, rotating equipment, insulators and bushings • Meets requirements of a Type-I withstand testing according to IEEE 400.2 and other national and international standards • User specified or automatically adjusted output frequency according to easuredm capacitance (0.1Hz to 0.01Hz in 0.01Hz steps) • Sinusoidal, cosine rectangular, or DC output waveform • True symmetrical sinusoidal, load independent output waveforms across full load range HV Diagnostics HVA34 • Short circuit protection with active arc management • Digital metering displays voltage (RMS or Peak), capacitance, resistance, elapsed time, and flashover voltage • Storage of test results and test sequences (test plans) in internal memory and on-board USB port for USB flash drive • HVA Control Center software produces professional reports • Keyed safety interlock and emergency shutdown • Seamless integration with HV Diagnostics tan delta measurement systems, HV Diagnostics partial discharge analysis equipment and Power Diagnostix ICMFlex

HV Diagnostics HVA120 • HVA28TD model adds on-board tan delta measurement system

HVA Model Peak Voltage RMS Voltage Acceptance Maintenance

HVA28TD 28kV 20kV Up to 15kV Up to 20kV

HVA30 30kV 22kV Up to 16kV Up to 22kV

HVA34 34kV 24kV Up to 15kV Up to 25kV

HVA34TD 34kV 24kV Up to 15kV Up to 25kV

HVA45TD 45kV 32kV Up to 25kV Up to 30kV

HVA60 60kV 44kV Up to 35kV Up to 46kV

HVA90 90kV 64kV Up to 46kV Up to 69kV

HVA120 120kV 85kV Up to 69kV Up to 69kV

46 (866) 352-5550 | protecequip.com HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | POWER FACTOR TEST SETS

Power Factor Test Sets

Doble M4000/M4100 Power Factor Test Set

• Rugged construction for field use with laboratory accuracy and precision • Industry standard for testing electrical apparatus such as transformers, generators and cables Doble M4000/M4100 • Evaluates integrity of high voltage substation apparatus by measuring power factor/tan delta • Measures capacitance to evaluate physical changes • Measures accurately in high electrostatic and electromagnetic conditions • Measures excitation current to evaluate transformer magnetizing circuit • Line frequency modulation technology eliminates substation interference • Automated testing procedures through DTA or manual through M4000 clipboard • Available with an M4000 and DTA preconfigured laptop computer or DUC, and all application appropriate accessories Doble M4110 • Internal field calibration reference ensures accurate testing • Built in diagnostics provide information on instrument status • Output current to 300mA at 10kV (total output power 3kVA) for better replication of in-service conditions • Optional Type C resonator increases output capacity • Optional M4110 available for measuring the impedance of the apparatus under test • Optional M4140 available for measuring capacitance of capacitor banks • Optional liquid insulation test cell for measuring insulating characteristics of oil

Doble M4140 • Optional TTR capacitor for measuring transformer ratio

Doble Type-C Resonating Inductor

• Used in conjunction with the Doble M4000/M4100 to provide extra current needed for high voltage test levels • Iron core reactor with adjustable air gap • Capable of resonating capacitance of 0.05 to 1.0μF at 10kV 60Hz

Doble Type-C

(866) 352-5550 | protecequip.com 47 HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | POWER FACTOR TEST SETS

Power Factor Test Sets

Megger CB100 Power Factor Test Set

• Lightweight and portable (21 lbs) • Output of 26V at 100Hz minimizes 60Hz interference • Performs UST and GST configuration testing • Direct reading of capacitance and dissipation factor Megger CB100 • Simple manual interface • Optimal for transformer dry out

Megger DELTA4310 Power Factor Test Set

• Fully automatic insulation power factor/dissipation factor test set up to 12kV • Suitable for testing transformers, bushings, circuit breakers, cables, lightning arresters and rotating machinery • Measures excitation current of transformer windings, automatic tip-up tests and HV turns-ratio testing (with optional TTR capacitor)

Megger DELTA4310

Megger MIT525 Insulation Resistance Meter

• Simple to use with intuitive controls and features • Battery operated • Performs PI, step voltage, dielectric discharge, dielectric absorption ratio automatically • Burn and breakdown functions available in insulation resistance mode Megger MIT525

48 (866) 352-5550 | protecequip.com HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | POWER FACTOR TEST SETS

Power Factor Test Sets

Omicron CPC 100 Multifunctional Primary Test System

• A complete transformer test system, including 12kV power factor tests • Measures capacitance, dissipation factor tan δ (tan delta), power factor COS φ, watts losses, power (effective power, apparent power and reactive power), and impedance (absolute value, phase, inductance, resistance, quality) with optional Omicron CPC 100 CP TD1 component • On-board computer driven test plans to replicate or trend power factor tests with existing values • Applies up to 12kV at variable frequencies which enhances diagnosis of insulation aging • Automatic power factor testing via Omicron’s primary test manager software with the included preconfigured laptop computer or via front panel controls (includes test templates) • Provides for automated testing of power transformers, CTs, VTs, resistance testing and more Omicron CP TD1 • Optimal for emergent requirements or remote applications; one device replaces multiple instruments • Stand alone functionality for: y Ratio, burden and polarity, phase and magnitude error, excitation curve, winding resistance, secondary burden and dielectric withstand tests for CTs and PTs y Ratio, winding resistance, tap changer testing, excitation current, short circuit impedance measurement and leakage reactance testing of transformers y Contact resistance, winding resistance, ground resistance or measurement of complex impedances Omicron CP B2 y Single-phase testing of primary and secondary relays (including overcurrent, over voltage, undervoltage and frequency relays

• 2kV AC voltage source current source to 400A DC and 800A AC • Optional CP CB2 boosts current output to 2,000A AC • Optional CP TD12 for performing power/dissipation (tan delta) factor and capacitance measurements • More CPC-100 accessories available on pages 32, 33 and 111 Omicron CP TD12

Omicron CP SB1 Switch Box for Automated Transformer Testing

• Used with Omicron CPC-100 and TD-1 • Provides connections for three-phase winding resistance and three-phase TTR measurements • Primary Test Manager (PTM) software provides automated (sequential) testing of all Omicron CP SB1 phases and each tap changer position • Permits one-time cable connections reducing time spent connecting cables • Minimizes erroneous results with automated testing

(866) 352-5550 | protecequip.com 49 HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | RECLOSER CONTROL TEST SETS

Recloser Control Test Sets

Cooper Power Systems Eaton KMET1 MET Recloser Controller Tester

• Ideal for testing ME Form 2, Form 3, Form 3A, Form 4A, Form 4C, Form 4D, Form 5, Form 6, Type FX, Type FXA, and FXB Controls • Verifies operation of the electronic recloser control • Verifies electrical operation of the recloser • Note: power must be available for the recloser for electrical operation Cooper Power Systems • Recloser simulator circuit indicates operation with LEDs and simulates response time Eaton KMET1 of the recloser mechanism to trip and close signals

Cooper Power KMET45811 & DC Nova 14 to 19 pin accesso- ries available for use with the KMET1

KMET45811 DC Nova

Cooper Power Systems Eaton VFI VFI Tester

• Designed to be used with Cooper Power Systems Eaton pad-mounted VFI switchgear • Simulates fault current for verification of minimum trip values and time current characteristics of tri-phase and TPG electronic control boards • On-board flux-shift trippers enable self-checking of the VFI tester

Cooper Power Systems • Performs minimum-trip tests, time current curve characteristic tests, control Eaton VFI operation test, instantaneous trip test, battery and flux-shift tests • Limited testing of SCADA accessory board functions including verification of the minimum trip multiplier function and inrush restraint feature

Omicron ARCO 400 Universal Test Set for Recloser Controls

• Enables three-phase testing of all types of recloser controls • LEDs indicating breaker positions for each phase • Safe and touch-proof combined test interface • Accurate three-phase, 12.5A current amplifiers enable both testing at very low amplitudes and the testing of functions with high fault values Omicron ARCO 400 • Operated by the ARCO control software

50 (866) 352-5550 | protecequip.com HIGH VOLTAGE CIRCUIT BREAKER & SUBSTATION | TRANSDUCER TEST SETS

Transducer Test Sets

Manufacturer Model Description Can be used to interface any Doble travel transducer to a Van- Doble 9084UC guard circuit breaker analyzer Doble TR3171 Specifically designed for ABB AHMA 4/8 Mechanisms 40 ft rotary transducer that provides direct capture of the Doble TR3186 breaker’s true linear motion 40 ft linear transducer installs in minutes, with no adapters or Doble TR3189 modifications. Provides direct capture of the breaker’s true linear motion Linear and rotary transducer is for use in conjunction with the Doble TR3190 Doble TR3100, TDR9000, and TDR900 series units Doble TRMLP50 Resistor type rotary A small diameter sensor (2MHz) with a pipe diameter range of Fuji FLD22 0.50" to 4.0" and a temperature range of -40 to 212°F Transducer node for CIBANO500 checks the entire switch Omicron CB TN3 mechanism and the mechanical links during the opening and closing process 25" rotary transducer with magnetic mount is used for Vanguard RT-1 measuring circuit-breaker contact stroke, velocity, over-travel, and bounce back 10" rotary transducer is used for measuring circuit-breaker contact stroke, velocity, over-travel and bounce back. With the Vanguard RT-2 use of a Vanguard digital circuit breaker analyzer, neither cali- bration nor setting is required 25" linear transducer used for measuring circuit-breaker Vanguard TR-1 contact stroke, velocity, over-travel and bounce back. Neither calibration nor setting is required 10" linear transducer used for measuring circuit-breaker Vanguard TR-2 contact stroke, velocity, over-travel and bounce back. Neither calibration nor setting is required Vanguard TR1 ext 25 ft transducer extension cable Rotary transducer used for measuring circuit-breaker contact Vanguard TR-HMB stroke, velocity, over-travel and bounce back. Neither calibration nor setting is required

(866) 352-5550 | protecequip.com 51 52 (866) 352-5550 | protecequip.com LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | DIGITAL LOW RESISTANCE OHMMETERS

LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR

Circuit breakers have historically functioned as the protective muscle of the electrical power system. Their effectiveness in performing their job depends on the unique application, design and operating condition. While protective guardians vary widely regarding design and construction, they continue to share in the basic functionality of conducting or interrupting the flow of electricity. Additionally, their ability to perform these functions in concert with their intended design is subject to mechanical, electrical and environmental impacts. Like an insurance policy that fails to protect, a circuit breaker that does not serve its protective purpose is of little value. When something occurs resulting in unexpected fault conditions, we need to be able to count on circuit breakers to perform as intended. A testing and maintenance program will help to provide confidence that the electrical system is in good health. Protec carries an inventory of test equipment for all your circuit breaker and switchgear testing needs.

Digital Low Resistance Ohmmeters

AEMC 6240/6250 10A Micro-Ohmmeter

• Battery operated, light weight and compact design • User selectable test current and resistance ranges • 6250 model adds internal storage of readings with data storage and analysis software included • Includes temperature compensation and user selectable resistive or inductive materials measurement AEMC 6240/6250

Megger DLRO2 - 2A Hand-Held Low Resistance Ohmmeter

• New Difference Meter for quick data comparisons • Uses long leads at 1A without compromising test speed • Safely test the resistance of inductive loads at 1A • >600V active protection against inadvertent live connections without blowing a fuse

Megger DLRO2

(866) 352-5550 | protecequip.com 53 LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | DIGITAL LOW RESISTANCE OHMMETERS

Digital Low Resistance Ohmmeters

Megger DLRO10HD 10A Digital Low Resistance Ohmmeter (DLRO)

• Internal storage of test data for download or printing on site with optional printer • Lightweight compact design (33 lbs) • Includes heavy-duty alligator clamp or optional C-clamps

Megger DLRO10HD

Megger DLRO200-115 200A Digital Low Resistance Ohmmeter (DLRO)

• Lightweight and compact design • Stores test records in on-board memory or to USB flash drive • 1A to 200A test current • Heavy duty and field rugged

Megger DLRO200-115

Megger DLRO600 600A Digital Low Resistance Ohmmeter (DLRO)

• Test currents from 10A to 600A • Internal storage of test data for download or printing on site with optional printer • Lightweight compact design (33 lbs) • Includes heavy-duty alligator clamp or optional C-clamps Megger DLRO600

54 (866) 352-5550 | protecequip.com LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | DIGITAL LOW RESISTANCE OHMMETERS

Digital Low Resistance Ohmmeters

Megger MOM2 200A Digital Low Resistance Ohmmeter (DLRO)

• Lightweight and compact design • Stores test records in on-board memory or to USB flash drive • 1A to 200A test current • Heavy-duty and field rugged

Megger MOM2

Raytech Micro Centurion II MC-2 200A Micro Ohm Meter

• Selectable output from 10A to 200A • High precision – measurements from 0.01μΩ to 20μΩ with resolution of 0.01μΩ • Internal memory records 2,000 test results • Heavy-duty and field rugged

Raytech Micro Centurion II MC-2

Raytech Micro Junior 2 10A Micro Ohm Meter

• Automated measurement detection and storage modes • On-board printer • Automatic polarity reversal • Battery operated

Raytech Micro Junior 2

(866) 352-5550 | protecequip.com 55 LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | DIGITAL LOW RESISTANCE OHMMETERS

Digital Low Resistance Ohmmeters

Vanguard Auto-Ohm 100 100A Micro-Ohmmeter

• Selectable output from 10A to 100A • Programmable current rise and fall rates • Auto-test mode permits applying sense leads across points of interest

Vanguard Auto-Ohm 100

Vanguard Auto-Ohm 200 S3 200A Micro-Ohmmeter

• Lightweight and compact design (17 lbs) • On-board QWERTY Keyboard • Stores test records in on-board memory or to USB flash drive • 1A to 200A test current Vanguard Auto-Ohm • Programmable current rise and fall rates 200 S3 • Auto-test mode permits applying sense leads across points of interest

56 (866) 352-5550 | protecequip.com LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | HIGH CURRENT TEST SETS

High Current Test Sets

Electrical Test Instruments ETI PI-1600B 16,000A High Current Test Set

• Convenient one-man portable three piece design, total weight approximately 270 lbs • Intuitive and rugged MAC-20 digital controller with memory and seconds/ cycles timer • 240V input with optional autotransformer for 480V input • Will test low-voltage, molded-case and metal-clad, direct acting AC circuit breakers from various manufacturers • Can also be used on high current applications like ratio transformers, and heat runs • Consists of PI-800 test set plus PI-AUX output unit to double output capacity ETI PI-1600B • Output current and overload capabilities in the chart below

ETI PI-1600B Duty Cycles

4.2V Series/Parallel 8.4V Series Overload Duty On Time Off Time Max Input @ 240V

1,600A 800A 1X 100% Continuous N/A 38A

2,250A 1,125A 1.4X 50% 15 Min 15 Min 53A

3,200A 1,600A 2X 25% 5 Min 15 Min 75A

4,800A 2,400A 3X 10% 2.5 Min 20 Min 112A

6,400A 3,200A 4X 6% 75 Sec 20 Min 150A

8,000A 4,000A 5X 4% 4 Sec 2 Min 187A

11,200A 5,600A 7X 2% 2 Sec 2 Min 262A

16,000A 8,000A 10X 1% 0.6 Sec 1 Min 375A

(866) 352-5550 | protecequip.com 57 LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | HIGH CURRENT TEST SETS

High Current Test Sets

Electrical Test Instruments ETI PI-5000/PI-6000 40,000A/60,000A High Current Test Set

• Intuitive and reliable MAC-20 and MAC-21 digital instrumentation • Package and memory ammeter • Seconds/cycles timer • 240V or 480V Input (switch selectable) • 240V limits output to 30kA for PI-6000 ETI PI-5000/PI-6000 • Included 1/2" and 3/4" stabs, 150 ft input power cables and output cables to meet the user’s specific requirement

ETI PI-5000 Duty Cycles 9V Parallel 18V Series Overload Duty On Time Off Time 4,000A 2,000A 1X 100% Continuous N/A 5,600A 2,800A 1.4X 50% 15 Min 15 Min 8,000A 4,000A 2X 25% 5 Min 15 Min 12,000A 6,000A 3X 10% 1.5 Min 15 Min 16,000A 8,000A 4X 6% 45 Sec 15 Min 20,000A 10,000A 5X 4% 4 Sec 2 Min 28,000A 14,000A 7X 2% 2 Sec 2 Min 40,000A 20,000A 10X 1% 1 Sec 2 Min

ETI PI-6000 Duty Cycles

9V Parallel 18V Series Overload Duty On Time Off Time 6,000A 3,000A 1X 100% Continuous N/A 8,400A 4,200A 1.4X 50% 15 Min 15 Min 12,000A 6,000A 2X 25% 5 Min 15 Min 18,000A 9,000A 3X 10% 1.5 Min 15 Min 24,000A 12,000A 4X 6% 45 Sec 15 Min 30,000A 15,000A 5X 4% 4 Sec 2 Min 42,000A 21,000A 7X 2% 2 Sec 2 Min 60,000A 30,000A 10X 1% 1 Sec 2 Min

58 (866) 352-5550 | protecequip.com LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | HIGH CURRENT TEST SETS

High Current Test Sets

High Voltage PFT-303/PFT-503CM 30kV and 50kV AC Hipot

• 0 to 100mA output current; total output 3kVA (capacitive loads) • 20 ft shielded output cable with alligator clip • Approximately 75 lbs • Ideal for testing low capacitance substation apparatus: vacuum bottles, breakers, High Voltage switchgear, bushing, reclosers, small transformers and small motors PFT-303/PFT-503CM • Not suitable for ISO phase bus applications or cable testing

High Voltage PFT-652CM 65kV Power Frequency AC Hipot

• Two-piece design improves portability and reduces transportation cost • 2kVA (capacitive) total output • Analog metering for current leakage and voltage output • 20 ft shielded output cable with alligator clamp High Voltage • Ideal for low capacitance substation apparatus PFT-652CM • Not suitable for ISO phase bus or cable applications

Megger 230425 4kV AC and 5kV DC Hipot

• One second or continuous testing • Adjustable leakage current limit from 0.3mA to 12mA • High voltage cut-off within 50mS of arcing or exceeding preset current leakage level • Automatic cut-off if ground circuit resistance exceeds 15Ω during a test • Familiar and simple controls in a lightweight package Megger 230425

(866) 352-5550 | protecequip.com 59 LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | HIGH CURRENT TEST SETS

High Current Test Sets

Megger CB-832 1,800A High Current Test Set

• Instantaneous current to 2,000A or continuous current to 500A • Memory ammeter and seconds/cycles timer • Simple manual controls with robust construction

Output On Time Off Time Megger CB-832 500A 30 Min 30 Min 1,000A 3 Min 8 Min 1,500A 30 Sec 4 Min 2,000A 7 Sec 2 Min

Megger CB-845 4,500A High Current Test Set

• Instantaneous current to 4,500A or continuous current to 1,200A • Memory ammeter and seconds/cycles timer Megger CB-845 • Two-man portable; controller weighs 70 lbs, output transformer weighs 123 lbs • Input voltage 208V and 240V, 30A

Megger DDA-1600 16,000A Circuit Breaker Test Set

• Ideal for testing circuit breakers up to 1,600A • Modular and portable design – heaviest component is 210 lbs • Convenient 480V / 150A input service • Series/parallel selection adjusts for a higher output voltage and reduced current Megger DDA-1600 • Maximum continuous current of 1,600A; instantaneous current of 19,200A through an air frame circuit breaker or 14,400A through a molded case circuit breaker

60 (866) 352-5550 | protecequip.com LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | HIGH CURRENT TEST SETS

High Current Test Sets

Megger DDA-6000 60,000A Universal Circuit Breaker Test Set

• Digital controller includes memory ammeter, timer, and voltmeter • Intuitive DDA-1 controller provides for simple operation • Maximum current at 480V input: y 6,250A maximum continuous current Megger DDA-6000 y 60,000A maximum current through a circuit breaker y 100,000A maximum current through a short circuit

• 30 minutes on / 30 minutes off duty cycle • Autotransformer for 208V / 240V source

Current On Time Off Time 4,500A Continuous N/A 6,250A 30 Min 30 Min 10,000A 15 Min 45 Min 30,000A 2 Min 60 Min 60,000A 5 Sec 12 Min

Megger MS-2A 500A Circuit Breaker and Overcurrent Relay Test Set

• Instantaneous current to 500A or continuous current to 240A • Memory ammeter and seconds/cycles timer • Lightweight and compact (33 lbs) • Simple operations and controls Megger MS-2A

Megger ODEN AT 21,900A Primary Current Injection Test System

• Compact hand truck/cart provides enhanced mobility in tight spaces where traditional large frame systems are impractical • Quick disassembly/re-assembly of modular components enables access to roofs and mezzanines so circuit breakers can be left in place • Unique I/30 function allows current to be preset using lower currents to prevent apparatus from overheating and influencing results or slowing testing progress • 480V input voltage, 3,800A @ 3.6V and 1,250A @ 10.7V continuous Megger ODEN AT • 21,900A @ 3.6V and 7,200A @ 10.7V instantaneous

(866) 352-5550 | protecequip.com 61 LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | HIGH CURRENT TEST SETS

High Current Test Sets

SMC Raptor C-05 3,800A Multifunctional Primary Testing System

• Suitable for numerous test and measurement functions involving medium to moderate current where the distance to the tested device is not a factor, as when testing MCBs or medium-sized MCCBs • Can comfortably work in the range of 500A using a narrow connection (around 25sq. mm) • Output frequency can be varied between 20Hz and 400Hz SMC Raptor C-05 • Auxiliary output, binary input and measurement functions are automatically configured by the standard set of test templates

Vanguard MCCB-250 500A Circuit Breaker Test Set

• Programmable high current source appropriate for testing molded-case circuit breakers • Circuit breakers and thermal magnetic or solid state overload motor protection relays Vanguard MCCB-250 • Rugged and robust design for field applications • On-board multifunction timer • Simple operations and controls • Four current outputs (5A @ 120V, 25A @ 24V, 120A @ 6V and 250A @ 3V)

Current On Time Off Time 250A 30 Min 30 Min 500A 3 Min 5 Min 750A 30 Sec 4 Min 1,000A 4 Sec 7 Min

62 (866) 352-5550 | protecequip.com LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | INSULATION RESISTANCE TEST SETS

Insulation Resistance Test Sets

Manufacturer Model Voltage Rating

AEMC 6536 1kV

Fluke 1587 FC 1kV

Fluke 1587MDTFC 1kV

Megger 210415 15kV AEMC 6536 Megger BM15R 5kV

Megger MIT485 1kV

Megger MIT520 5kV

Megger MIT525 5kV

Megger MIT1025 10kV Fluke 1587 FC Megger MIT1525 15kV

Megger S1554 5kV

Metrel 3103 1kV

Metrel 3200 10kV

Megger MIT1525

Megger MIT insulation resistance units feature PI, DAR, DD, SV & Ramp testing

Metrel 3200

(866) 352-5550 | protecequip.com 63 LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | PRIMARY CURRENT INJECTION TEST SETS

Primary Current Injection Test Sets

Max. Output Largest Input Voltage Shipping Weight Model Pieces Through a Breaker Single-phase (with crate) Breaker Megger MS-2A 1 125A 120Vac 750A 45 Lbs.

Vanguard MCCB-250 1 125A 120Vac 1,000A 60 Lbs.

Megger SPI225 1 225A 120Vac 2,000A 62 Lbs

Megger CB-832 1 225A 120Vac 1,800A 104 Lbs.

SMC Raptor C-05 1 350A 240Vac 3,800A 106 Lbs.

Megger CB-845 2 500A 208 / 240Vac 5,000A 280 Lbs.

ETI PI-800 2 800A 120 / 240Vac 8,000A 275 Lbs.

ETI PI-1600B 3 1,600A 240Vac 16,000A 385 Lbs.

Megger DDA-1600 4 1,600A 240Vac 16,000A 400 Lbs.

Megger ODEN AT 1 2,200A 480Vac 21,900A 880 Lbs.

ETI PI-5000 2 4,000A 480Vac 40,000A 1,000 Lbs.

ETI PI-6000 1 6,000A 208 / 240Vac 60,000A 1,650 Lbs. 208 / 240 / Megger DDA-6000 1 6,000A 60,000A 1,750 Lbs. 480Vac

64 (866) 352-5550 | protecequip.com LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | SECONDARY CURRENT INJECTION TEST SETS

Secondary Current Injection Test Sets

Manufacturer Model Trip Unit / Circuit Breaker Reference

ABB 504 Power Shield for I-T-E breakers K-600 through K-4000

ABB 505 LK-800, 1600, 2500, 3200, 4000, 4200

ABB 606 LK-800, 1600, 2500, 3200, 4000, 4200

ABB 607 MPS-C-3, MPS-C-3G, MPS-C-4, MPS-C-4G, MPS-C-5, MPS-C-5G

ABB BTSB Micro Power Shield (MPS-C and MPSC-2000)

SACE (PR111, PR112, PR113, PR121, PR122, PR123, PR212, PR222, PR223, ABB PR010/T Top 25, Emax

SACE, ALL, Emax, Emax DC, Emax 2, ISOMAX, New Emax, VF, New Megamax ABB Ekip HF1,2,3,4 T7/T8/X1, Tmax, Tmax XT, X1

Allen-Bradley 140G-ELTT 140G/140MG-G, H, I, J, K, L, M and 140G-N, NS R

Carriere STS100 Carriere FB600ER RMS

Amptector, Digitrip RMS 500, 510, 600, 610, 700, 800, 810, 910, Optim 750, Eaton Cutler-Hammer 140D481G03 1050 **SPB with RMS must be primary injection tested

Eaton Cutler-Hammer 1232C50G05 Seltronic, series C, Digitrip RMS 310, SPB Digitrip RMS 210

Seltronic, series C, Digitrip RMS 310, Digitrip RMS 310 mining, SPB Digitrip RMS Eaton Cutler-Hammer 1232C50G10 (STK2) 210

Eaton Cutler-Hammer 1287C56G02 Seltronic test kit

Eaton Cutler-Hammer 70C1056 Magnum breakers with Digitrip trip sets (520 series, 1150 series)

Eaton Cutler-Hammer 70C1056G54 Magnum breakers with Digitrip trip sets (520 series, 1150 series)

(Pass/Fail) OPTIMizer / handheld programmer for Digitrip OPTIM units 550, Eaton Cutler-Hammer 7801C57 750, and 1050 trip units

Eaton Cutler-Hammer 8779C02G03 DS, DSII adapter for 140D481G03

Eaton Cutler-Hammer MTK1000 Magnum breakers trip unit (upgraded) - Digitrip 520 series, 1150 series

Eaton Cutler-Hammer MTK2000 Magnum breakers trip unit (upgraded) - Digitrip 520 series, 1150 series

(866) 352-5550 | protecequip.com 65 LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | SECONDARY CURRENT INJECTION TEST SETS

Secondary Current Injection Test Sets (Continued)

Manufacturer Model Trip Unit / Circuit Breaker Reference

Eaton Cutler-Hammer PRTAAPM Aux power module for Digitrip OPTIM trip units 550, 750, and 1050 trip units

Federal Pioneer DDT-USRC USR and USRC overcurrent relay

GE DEH-233 Entellisys test set

GE GTUTK20 EntelliGuard TU test set

GE PST1-1 Power Sensor and Power Sensor 1A

GE TAKTS2 ECS, SST and VersaTrip model 2

GE TTS1 VersaTrip pre-model 2, including breaker types TJS, TKS, TPSS and THSS

Power+, RMS9, Epic, MVT Plus and MVT PM or Spectra RMS GE TVRMS2 MicroVersaTrip Plus and MicroVersaTrip PM (TT and A, B, or C types)

MicroVersaTrip programmers, TP4VT, TP9VT, T4VT, T9VT, TAVT, GE TVTS1 TP4VT20/25/30 and TP9VT20/25/30/40

DS Magnum 4-in-1 adapter. Substitute for the 8779C02G03, 8779C02G04 and MadTest DSM4i1 PRTAAPM

ME Test Kit (Masterpact STxx8, STRx8, Compact ST2x4, Merlin Gerin 55391 or ME ST205-3x5, STRx5, STCM2, STCM3, Compact NS STR22, STRx3)

Satin American ETC-PTS ETC trip units

Siemens ELTPHB VL ETU breakers

Siemens PTS-3 Limitrip, Static Trip I (dual trip), and Static Trip III

Siemens PTS-4 Limitrip, Static Trip I (dual trip), Static Trip II, and Static Trip III

Limitrip, Static Trip (dual trip), Static Trip III (only RL and MLA type Static III) (not Siemens PTS-5 3VA)

Siemens SBAPM Auxiliary power module for SB breakers

Siemens TD500 Used to test the Siemens 3VA family of circuit breakers with ETU trip units

Siemens TS-31 JD, LD, MD, or PD, SB and STD breakers, Sensitrip III

66 (866) 352-5550 | protecequip.com LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | SECONDARY CURRENT INJECTION TEST SETS

Secondary Current Injection Test Sets (Continued)

Manufacturer Model Trip Unit / Circuit Breaker Reference

Siemens Westrip Adapter RMS-2000, RMS-2007AF, RMS-2012AF

Siemens WLTS WL Sentron breakers, ETM trip units, ETU trip units (ETU7 Only)

Micrologic (MasterPact, PowerPact, Compact NS) series 2.0, 3.0, 5.0, 6.0, 7.0 and Square D S33595 ET trip units

Square D CBTM1 SE module for UTS3

Square D CBTM3 ME-NE-PE module for UTS3

Square D CBTM4A (Series A) M-N-P-S module for UTS-3

Square D CBTMB (Series B) module for UTS-3

Square D UTS-3 Micrologic full function Series B

Compact NSX 100-250, NSX 400-630, Micrologic 2.2M, 2.3M, 3.2, 3.3, 5.2, 5.3, Square D UTA Tester 6.2, 6.3 trip units

Utility Relay Company B-290 Zero-Hertz DC trip units

Utility Relay Company B-291MP AC Pro MP trip units

Utility Relay Company B-292 AC Pro and AC Pro II trip units

Westinghouse 12552C48G02 SCB II breaker operation test set

SPBPTK Westinghouse Pow-R Breaker, Pow-R Trip, Pow-R Trip7 (1272C61G02)

(866) 352-5550 | protecequip.com 67 LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | VACUUM BOTTLE TEST SETS

Vacuum Bottle Test Sets

Vacuum Interrupters MAC TS4 Vacuum Interrupter Tester

• Quantitative test predicts the useful life of a vacuum bottle rather than go/ no-go tests using an AC or DC hipot • Uses the penning discharge principle to determine pressure inside the Vacuum Interrupters vacuum bottle MAC TS4 • Pressure, wear, and operations count can predict remaining service life • Data analysis and technology based on measurements of more than 3,000 Vacuum Interrupters • System is compatible with either fixed or flexible magnetic coils

Vacuum Interrupters PowerVac V1 Rigid Magnetic Coil for GE PowerVac Circuit Breakers

• Enables testing of GE PowerVac breakers without disassembly • Used in conjunction with the MAC-TS4, the unit slides over the PowerVac pole assembly • Determines the remaining service life of a PowerVac vacuum bottle Vacuum Interrupters PowerVac V1

Vacuum Interrupters CBT-1202 Circuit Breaker Timer

• Self-contained, multi-use test set designed to operate and interact with all types of circuit breakers • Incorporates a digital timer to capture and store trip, close and bounce times; and 10 test results can be stored in the internal memory • Field portable • 120VAC / 125V DC output for charging spring charged circuit breakers while outside Vacuum Interrupters their cubicle CBT-1202 • Has unique cable sets which speed and simplify connection to the breaker under test

68 (866) 352-5550 | protecequip.com LOW/MEDIUM VOLTAGE CIRCUIT BREAKERS & SWITCHGEAR | VACUUM BOTTLE TEST SETS

Vacuum Bottle Test Sets

Vanguard DigiTMR Circuit Breaker Timer and Analyzer

• Operates with insertion resistors up to 7,000Ω and initiates breaker operation • Trip/close coil current monitoring capabilities • Determines contact time, stroke, velocity over-travel and contact wipe • Monitors all three breaker poles at once Vanguard DigiTMR • On-board printer for immediate results documentation and on-board test plan storage or repetitive tests • Stand-alone operation or computer interface allows for data collection and operational control • USB PC interface and USB flash drive interface with on-board data storage for up to 200 test results and up to 100 test plans • Simplified connections with one main contact assembly • More Circuit Breaker Timer and Travel Analyzers available on page 35

Vanguard VBT-60 60kV Vacuum Bottle Tester

• Automated testing from 10kV to 60kV DC in 5kV steps • Selectable dwell time from 5 seconds to 2 minutes • Digital voltage and current display Vanguard VBT-60 • Failure indicator LED • Lightweight (10 lbs) • Display indicates test voltage and mA leakage during test • Selectable overcurrent limits of 100mA, 200mA and 300mA

(866) 352-5550 | protecequip.com 69 70 (866) 352-5550 | protecequip.com METERS & INSTRUMENTATION | BORESCOPES

METERS & INSTRUMENTATION

Test equipment for rotating machinery, such as motors and generators, play such a significant role in the health of the motor-driven world that surrounds us. Applications for this type of apparatus seem to be almost limitless and are key to ensuring that there is no interruption to the processes and conveniences of today’s world. Additionally, Protec maintains an inventory of metering products that are applicable for the purpose of quantifying the components of electrical signals (V, I, Ω, Z, W, VA, Wh, VAh etc.) including their relational characteristics such as phase angle and rotation. When testing areas of instrumentation and controls, contact Protec for , power supplies, solar metrics, multifunction process calibrators, barometers, thermal metrics (IR cameras), RTD simulators and much more.

Borescopes

Extech HDV640 HD VideoScope Articulating Probe

• Articulating probe tip adjusts up to 240o viewing angle • 5.7” color LCD TFT with HD 640 x 480 VGA pixel presentation • SD memory card included to store more than 15,000 images Extech HDV640 • AV output for viewing images on a monitor • 65 FOV • Working length is 1m

Olympus IPLEX RT Videoscope

• Compact and portable design • Two hour battery life Olympus IPLEX RT • 6.5” monitor • Truefeel articulation provides a precise and controlled bend at the distal end • 5m in length • 6mm scope diameter

(866) 352-5550 | protecequip.com 71 METERS & INSTRUMENTATION | CAPACITANCE & INDUCTANCE METERS

Capacitance & Inductance Meters

B&K Precision 885 LCR/ESR Meter

• Dual LCD display • Fully automatic/manual selection • DC resistance measurement • Measurement parameters: Z, L, C, DCR, ESR, D, Q and q B&K Precision 885 • Infrared RS-232 interface capability

ABB CB-2000 Portable Capacitance Meter

• Compact, self-contained capacitor bank analysis • Permits measurements of individual capacitors without breaking connections • Battery operated and easily portable • On-board memory can be transferred to a PC for report generation or data trending and analysis ABB CB-2000 • Data from PC can be transferred to CB-2000 for on the spot analysis • Available with large, wide-jaw current probe to accommodate a wide variety of capacitor bushings

72 (866) 352-5550 | protecequip.com METERS & INSTRUMENTATION | DECADE BOXES

Decade Boxes

AEMC BR07 Decade Box

• Accuracy of 1% • Range of 1 to 10 megaohms AEMC BR07 • Seven decades

General Resistance DA-RTD-200 Decade Box

• Absolute accuracy of 0.02% • Range of 20 to 1121.1 ohms • Five decades General Resistance DA-RTD-200

Time Electronics 1051 Resistance Decade Box

• Accuracy range from 0.1 to 10% • Range of 0 to 1 megaohms

Time Electronics 1051 • Eight decades

(866) 352-5550 | protecequip.com 73 METERS & INSTRUMENTATION | DEW POINT & HUMIDITY ANALYZERS

Dew Point & Humidity Analyzers

COSA Xentaur XPDM Portable Dew Point Meter

• Handheld • Battery-operated • HTF sensor technology • Single point calibration COSA Xenataur XPDM • Extremely fast response • Simple user interface consisting of a digital LCD display, and four push buttons

Vaisala DM70 Dew Point Analyzer

• Accurate, fast measurements for SF6 or transformer nitrogen blanket applications • Measures temperature, dew point, absolute humidity and relative humidity • Available sampling cell and fitting kit • Measurement ranges from -60 to 60°C (-76 to 140°F) and 40 to 200K ppm Vaisala DM70

74 (866) 352-5550 | protecequip.com METERS & INSTRUMENTATION | DRY BLOCK CALIBRATORS

Dry Block Calibrators

Manufacturer Model Temperature Range

Ametek CTC-650A 122°F to 1,202°F 50°C to 650°C

Hart Scientific 9100S 95°F to 707°F 35°C to 375°C

Hart Scientific 9100S-A 95°F to 752F 35°C to 400°C

Hart Scientific 9103-A -13°F to 284°F -25°C to 140°C

Hart Scientific 9140-A 95°F to 662°F 35°C to 350°C

Hart Scientific 9141-A 95°F to 1,202°F 35°C to 650°C

(866) 352-5550 | protecequip.com 75 METERS & INSTRUMENTATION | INFRARED SURVEY

Infrared Survey

FLIR C2 Compact Thermal Camera

• 45° field of view • Stores 4,800 individual thermal measurements you can analyze and edit using FLIR Tools software • Temperature range: -10°C to 150°C (14°F to 302°F)

FLIR C2

FLIR T440 Thermal Imaging Camera

• 320 x 420 Pixel IR resolution • MSX® enhancement to thermal images adds visible spectrum definition to IR images in real time FLIR T440 • 3.1 megapixel visual camera with on-board video lamp and laser pointer • Delta T and multiple measurement spots • 60-second voice recording or on-screen annotations

FLIR T530 Professional Thermal Camera

• 180° rotating optical block for imaging targets at any angle • 320 x 240 pixel IR resolution • 42° lens FLIR T530 • Infrared time lapse from 10 seconds to 24 hours • Two programmable buttons for ease of use • 60-second voice recording or on-screen annotations

76 (866) 352-5550 | protecequip.com METERS & INSTRUMENTATION | INFRARED SURVEY

Infrared Survey

FLIR T640 Thermal Imaging Camera

• Optical block rotates 120o for easier targeting • 640 x 480 pixel IR resolution FLIR T640 • Audible difference temperature alarm • 60-second voice recording or on-screen annotations • Connect via WiFi to FLIR Tools mobile for image analysis and sharing

Fluke Ti55 Thermal Imager

• Field rugged and optimized for use in harsh environments • Crisp, clear images with a 320 x 240 sensor

Fluke Ti55 • Fluke’s NETD thermal sensitivity identifies minute differences in temperatures • Merge infrared and real light images for image location identification and effective reporting through IR Fusion® technology • Emissivity correction, single hand focus capability and temperature compensation

Mikron 7200V Infrared Camera

• Ergonomically designed for comfortable one-handed point-and-shoot operation • Includes on-board digital voice recording • Can simultaneously record HD 14-bit thermal images with digital visual images • Three temperature ranges from -40C to 2,000C Mikron 7200V • Field of view: 29o x 22o

(866) 352-5550 | protecequip.com 77 METERS & INSTRUMENTATION | MOTOR & SEMICONDUCTOR ANALYZERS

Motor & Semiconductor Analyzers

Fluke 9040 Phase Rotation Indicator

• Effective for measuring phase rotation in all areas where three-phase supplies are used to feed motors, drives and electrical systems • The unit is a rotary field indicator and can provide clear indication of the three- phase via an LCD display and the phase rotation direction to determine correct Fluke 9040 connections • Allows rapid determination of phase sequence and has a voltage up to 700V and frequency range suitable for commercial and industrial applications

Iris Power ELCID Electromagnetic Core Imperfection Detection Test Set

• Provides rapid testing of the machine, often less than one work shift for turbo generators and motors • Minimize intrusive repairs by instantly verifying the results Iris Power ELCID • Fast test scanning (Up to 120mm/sec at 60Hz) • User-friendly LCD display to guide user operation • Easily identifies hot spots via color map display

Iris Power SWA Stator Wedge Analyzer

• Allows maintenance personnel to easily and effectively assess the tightness of stator wedges in motors or generators • Two operational modes: Standard and Advanced • In-depth analyzing capabilities • Printing of results • Ability to export test data to spreadsheets, databases or word processors Iris Power SWA

78 (866) 352-5550 | protecequip.com METERS & INSTRUMENTATION | MOTOR & SEMICONDUCTOR ANALYZERS

Motor & Semiconductor Analyzers

Larkin Power M3K Semiconductor Tester

• Identify and replace only marginal or bad components • Components are testes for forward and reverse leakage current at voltages up to 3,300V • output provides the ability to observe the voltage/current curve on a X-Y oscilloscope • Short current limited to 20mA for operator safety Larkin Power M3K • Tests components according to JEDEC JC-22 and EIA RS-397 test standards

Megger 560400 Phase Rotation Tester

• Provides complete phase-sequence and motor rotation testing • Ensures correct phase hookup in one easy test • Determines phase rotation or sequence of energized power circuits • Rugged, portable case with handle and removable lid Megger 560400 • Input frequency: 25Hz / 50Hz / 60Hz / 400Hz

PdMA MCE Motor Circuit Evaluator

• Offers the most versatile approach to troubleshooting and trending de-energized electric motors • Monitors power circuit insulation, stator, rotor and air gap • Variable test voltage from 250V to 5,000V • Automatic IR, PI, DAR and Step Touch voltages • Measures capacitance and inductance PdMA MCE

(866) 352-5550 | protecequip.com 79 METERS & INSTRUMENTATION | MOTOR & SEMICONDUCTOR ANALYZERS

Motor & Semiconductor Analyzers

PdMA MCEMAX™ Motor Circuit Evaluation Analyzer

• Monitors power circuit insulation, stator, rotor and air gap • Equipped with a fully functional laptop computer and loaded with MCEGold® • Variable test voltage from 250V to 5,000V • Automatic IR, PI, DAR and Step Touch voltages • Measures capacitance and inductance • Six channel simultaneous acquisition

PdMA MCEMAX™ • Torque and efficiency analysis • Impedance and phase angle measurement • Power and current signature tests

SKF Baker AWA-IV/12 Static Motor Analyzer

• The go-to instrument for motor repair, reliability and maintenance professionals who need to understand the electrical condition of motors • Performs the following tests: y Winding resistance y Insulation resistance SKF Baker AWA-IV/12 y Dielectric analysis y Polarization index y DC step-voltage y DC continuous ramped y DC hipot y Surge

SKF Baker PP30 Power Pack

• Increase the test capability of the Baker AWA-IV by coupling it with the PP30 • Produces up to 30kV for testing of high-voltage windings, and has three switchable test leads for simple connections to three-phase apparatus • Features large pneumatic wheels for easy transport to testing areas

SKF Baker PP30

80 (866) 352-5550 | protecequip.com METERS & INSTRUMENTATION | MULTIFUNCTION MULTIMETERS

Multifunction Multimeters

Manufacturer Model Description

Amprobe ACD-15 TRMS-PRO Digital clamp-on

Arbiter 928A Single-phase power system multimeter with current probe

Emerson 475/475FB Comprehensive field communicator with fieldbus

Fluke 43B Single-phase power quality meter

Fluke 87V Industrial multimeter

Fluke 190-204/S Four-channel oscilloscope

Fluke 192 Two-channel oscilloscope

Fluke 435 Three-phase power quality and engery analyzer

Fluke 754 Documenting process calibrator for HART troubleshooting

Fluke 787 Digital multimeter with loop (process) calibrator

Fluke 810 Comprehensive vibration metering test set

Fluke 1587 FC Advanced electrical troubleshooting kit

Megger PMM-1 Power multimeter

(866) 352-5550 | protecequip.com 81 METERS & INSTRUMENTATION | POWER SUPPLIES

Power Supplies

Electrical Test Instruments ETI ACDC-10 AC and DC Power Supply

• Small, lightweight and portable AC and DC power supply • Intended for resetting circuit breaker charging motors and other general-purpose applications • Provides DC voltage in three nominal ranges from 0 to 120V, 240V, and 480V at 1VA • AC voltage in three nominal ranges from 0 to 140V, 280V, and 560V at 1.4kVA ETI ACDC-10

Electrical Test Instruments ETI AD-1/AD-2 AC and DC Power Supply

• Portable variable AC/DC power supply • AC and DC voltage ranges: 0 to 120, 240, and 480 Volts at 1kVA • Rugged metal suitcase style case ETI AD-1/AD-2

Simran SIM-3000 Step Up/Down Voltage Transformer

• 3,000W maximum capacity, heavy-duty continuous use transformer • Converts 110V / 120V to 220V / 240V and vice versa • Four outlets on the front, an insulated power cable, and outlet adapters for global applications

Simran SIM-3000

82 (866) 352-5550 | protecequip.com METERS & INSTRUMENTATION | POWER SUPPLIES

Power Supplies

Staco 1520-3/C-3 Variable Transformer

• Single-phase, three-phase and three-phase variacs for 120V, 240V and 480V applications • Continuous adjustable output voltages from AC power lines without wave form distortion or SCR generated noise • Dependable and accurate AC control device Staco 1520-3/C-3 • Can be operated at frequencies between 50Hz and 2,000Hz with derating at higher than rated frequency • Shaft is fully adjustable and can be extended from either end for general utility mounting

Vanguard UPS-S2 Universal Power Supply

• Current capability of 10A continuous in either AC or DC voltage ranges • Variable DC output voltage of 300Vdc max • Variable AC output voltage of 240VAC max Vanguard UPS-S2 • 110V line powered • Approximately 55 lbs

(866) 352-5550 | protecequip.com 83 METERS & INSTRUMENTATION | PHOTOVOLTAIC / SOLAR MONITORING

Photovoltaic / Solar Monitoring

HT Instruments I-V400w Curve Tracer

• Ideal for commissioning, performance testing and troubleshooting photovoltaic (PV) installations • Provides measurement of IV curve of one or more modules or of complete string up to 1,000V / 10A • Mechanical inclinometer for incidence angle of solar irradiation • Numerical and graphical display of IV characteristics HT Instruments I-V400w • Uses four-terminal measurement method • Measurement of open-circuit voltage and short-circuit current Voc/Isc • On-board database of 30,000 selectable photovoltaic modules • Automatically determines efficiency comparison to manufacturer data • Immediate and clear indication of compliance upon test completion • Internal memory for results storage and review or download • On-board optical and USB port for PC connection

Seaward PV150 Solar Installation Tester

• Allows electrical safety and performance verification of photovoltaic installations in a safe and easy-to-use test set • Combines ground continuity, DC operating power and operating current test functions in a hand-held device • Unit can wirelessly capture and record real-time irradiance, ambient temperature Seaward PV150 and PV module temperature measurements from the Solar Survey 200R

Seaward Solar Utility Pro Complete Solar Testing Kit

• Tests parallel wired strings up to a maximum of 1500V / 40A • Direct MC4 connections, with the option to add a conversion lead set for safer connections in combiner boxes • A single press of the Test button will give values for Open Circuit Voltage and Short Seaward Solar Utility Pro Circuit Current

84 (866) 352-5550 | protecequip.com METERS & INSTRUMENTATION | WATTHOUR METERS

Watthour Meters

Radian Research RB-10 Bantam Lite Portable Test Kit

• Versatile single-phase standard with typical accuracy of 0.005% throughout operating range • Integrated analog to digital signal converter for real-world waveform measurement • Four-quadrant measurement registers forward and reverse energy flow and documents voltage, current, power and energy (active, reactive, and apparent) Radian Research RB-10 • Optional harmonic analysis through 50th harmonic order • Built-in comparator provides automatic calculation of test results • BNC for input/gating, pulse outputs and phase sync or analog sense • Intuitive five button user interface for setup of measurement, test sequence, and harmonics • Seamless integration with radian accessories

Scientific Columbus SC10 Watthour Standard Meter

• Full auto-ranging for current and potential inputs and auxiliary power • Backlit LCD readout • A maximum resolution to 0.00001Wh • Supports closed-link testing of solid state and electromechanical meters Scientific Columbus SC10

(866) 352-5550 | protecequip.com 85 86 (866) 352-5550 | protecequip.com PARTIAL DISCHARGE | OFF-LINE TEST SETS

PARTIAL DISCHARGE

When operating with high voltage equipment the use of Partial discharge (PD) detection equipment is necessary. Partial discharge is a localized dielectric breakdown of a small portion of a solid or liquid electrical insulating system under high-voltage field stress, which does not bridge the space between two conductors. If left unattended, partial discharge often leads to a failure of the electrical insulating system. To detect PD in the early stages, or to determine source location, periodic diagnostic PD measurements are recommended. Reliable and long-term operation of high voltage equipment can only be assured by PD prevention and detection. Protec carries and inventory of test equipment for all your partial discharge testing needs.

Off-Line Test Sets

HV Diagnostics High Voltage Sources for Off-Line PD Analysis

Output Volt- Total Typical Model Input Pieces age Weight Application HVA34 34kV VLF 120V 1 44 Lbs 15kV Cable

HVA60 60kV VLF 120V 1 126 Lbs 35kV Cable

HV Diagnostics PDTD120 HVA90 90kV VLF 120V 1 280 Lbs 46kV Cable HVA120 120kV VLF 240V 1 436 Lbs 69kV Cable

PDTD60 60kV VLF 120V 2 347 Lbs 69kV Cable

PDTD120 120kV VLF 120V 2 90 Lbs 35kV Cable

(866) 352-5550 | protecequip.com 87 PARTIAL DISCHARGE | ON-LINE TEST SETS

On-Line Test Sets

EA Technology CableData Collector Partial Discharge Analyzer

• Identifies and allows you to report on PD activity in live MV/HV cable networks • Detects and measures PD activity in single and three-phase cables • Works with all insulated cable types • Quick assessment of a large number of cables to build up a total view of the EA Technology CableData condition of a distribution cable network Collector • Quickly highlights cables that require more detailed analysis techniques

EA Technology UltraTev Plus2 Multifunction Partial Discharge Analyzer

• Quickly identify presence and severity of PD in electrical apparatus • Baselines PD activity to direct maintenance activities • Measures surface PD as numerical dB values and measures internal partial discharge as Transient Earth Voltage (TEV) values • Automatically grades condition of TEV and ultrasonic values for immediate analysis EA Technology UltraTev Plus2

Ofil Systems DayCor Superb-OD Corona Camera

• Accurately pinpoints sources of corona, partial discharge, micro arcing and arcing that may lead to: audio noise, radio/TV interference and electrical mechanical failures • An anatomically form-fitted harness distributes the camera’s weight and allows extended inspection intervals • Built-in recording, playback and storing of high-resolution video clips with voice Ofil Systems DayCor annotations and still pictures Superb-OD • Bi-spectral solar blind UV-visible camera allowing operation in full daylight

88 (866) 352-5550 | protecequip.com PARTIAL DISCHARGE | ON-LINE TEST SETS

On-Line Test Sets

PMDT PDetector Handheld Partial Discharge Detector

• One instrument solution for a wide variety of substation apparatus and cables • Represents the latest technology in both electromagnetic and acoustical sensors to identify and find PD in energized substations and switchgear • Available with Ultra High Frequency (UHF), Transient Earth Voltage (TEV), High Frequency CT (HFCT or RFCT), acoustical contact and airborne acoustic sensors • Sensors are wireless where appropriate so operator can maintain safe approach distances • Hand-held instrument is small, lightweight and portable • Short learning curve — operators can become proficient in minutes • Instrument identifies specific PD type: void, corona, surface, particle or floating PMDT PDetector electrode • Phase resolved display documents PD over the sine wave to ensure measured PD is from the circuit under test and not background or nominal noise • PRPD (2D) and PRPS (3D) compare UHF and HFCT signals to local power signal • AE and ultrasonic values displayed as RMS, peak, frequency content (x1 and x2), phase, pulse and wave spectrum • Wireless line synchronization is accomplished using the instrument charger • Suitable for use on power cables, transformers, GIS, switchgear and other substation apparatus • Available with PDetector software to catalog and trend results and produce professional reports • Programmable alarms document exact PD signature so reports are clear to those unfamiliar with PD testing • Software exports results to Excel or PDF • On-board RFID asset tagging and intelligent patrol functions automatically document the specific substation assets being tested

Sonel UV-260 Corona Camera

• High sensitivity to UV signals • Precise location of corona-emitting sources • UV events alarm and counter • Still image capture and review • Built-in GPS documents test location Sonel UV-260 • UV-260 PC software for reports

(866) 352-5550 | protecequip.com 89 90 (866) 352-5550 | protecequip.com POWER QUALITY | DATA ACQUISITION

POWER QUALITY

As electrical power systems grow and become more complex, power quality has become a topic of growing concern. The IEEE defines power quality as “the concept of powering and grounding sensitive equipment in a manner that is suitable to operation of the equipment.” In short, power quality equals reliability and reliability equates to dollars saved. Some of the known impacts of poor power quality have related to unplanned interruption of power and production processes, overheating and reduced life cycles of machinery, damage to sensitive equipment, interference with communications and increased electrical system losses. In order to strategically address the specific power quality issues that challenge the reliability of the electrical system, we must first identify what those specific challenges are. Power quality monitoring equipment is used to identify such quantities as voltage sags and swells, as well as transients, harmonic distortion and unbalanced loading. Protec maintains a complete range of power quality test and monitoring products to maintain, protect and service the reliability of your electrical power systems.

Data Acquisition

Astro-Med (AstroNova) TMX-18 18-Channel Data Acquisition System

• Optimal for load step tests, generator and UPS commissioning • Record any input signal at user defined sample rates up to 800KHz • Monitors AC or DC voltage directly to 1kV, or precision analysis at mV levels • Derived channels for mathematical comparisons of input values • Daisy chain TMX units together for 96 contemporaneous channel recordings Astro-Med (AstroNova) TMX-18

DENT ELITEpro Power Datalogger

• Records four channels of current and three channels of voltage • User defined sample rate from three seconds to 24 hours • ELOG software for recorder configuration, data retrieval, analysis and report generation • Measures and records voltage (AC or DC), current (AC or DC), frequency, kW, kWh, kVA, kVAh, kVAR, kVARh and power factor DENT ELITEpro • Available with the user’s choice of current probes

(866) 352-5550 | protecequip.com 91 POWER QUALITY | POWER QUALITY ANALYZERS

Power Quality Analyzers

AEMC PEL 103 Power and Energy Logger

• Reports generated with minimal configuration time and effort. • Can be installed inside a load center panel (including the current sensors) allowing the door to close on most panels • Measures and records three True RMS voltage inputs and current inputs, Watts, VARS, VA and Energy (kWh and kVA) AEMC PEL 103 • Power Factor (PF), Displacement Power Factor (DPF), Crest Factor, Frequency and THD are calculated and recorded • Individual harmonic % information from 1 to the 50th harmonic are recorded at the operator’s choice

The PEL Power Adapter is also • All variables are recorded and stored at a one second interval and on user selectable available for use with this unit. demand intervals from 1 to 60 minutes

AEMC PEL 105 Power and Energy Logger

• Measures nearly every circuit type including single-phase, split-phase, three-phase (multiple types) and DC circuits • Suitable for use in 50Hz / 60Hz, 400Hz and DC applications • Available with a wide variety of current probes • Current measurement from 200mA (for CT secondaries) up to 10,000A AC or AEMC PEL 105 5,000A DC • Direct voltage measurements to 2,000V phase-to-phase or 1,000V phase-neutral • Measures power: kVA, kW and kVAR • Permits configuration of ratios for medium or high voltage PT and CT secondary circuit

Amprobe DM-5 Power Quality Analyzer

• Simultaneously measures power, harmonics, waveform and power quality (voltage: three-channel, current: four-channel) • Record power quality events such as swells, dips, interruptions, transients, inrush currents and flickers • Automatic recording with memory for up to 1,000 parameters at user defined intervals • Voltage (RMS) range: 600Hz / 1,000V Amprobe DM-5 • Comes complete with measurement accessories, PC software, large carrying case and a Protec provided laptop computer

92 (866) 352-5550 | protecequip.com POWER QUALITY | POWER QUALITY ANALYZERS

Power Quality Analyzers

Arbiter 930A Power Analyzer

• Basic accuracy of 0.05% of reading and 0.05° of phase for full three-phase power analysis capability • Long life battery (more than 8-hour continuous run time) and smaller than a lunchbox Arbiter 930A • Datalog to internal memory or export by serial with real-time time/date stamps • Measures voltage and current, phase angle, frequency, harmonics, waveform and power/energy values

Dranetz HDPQ Xplorer/PowerExplorer PX5 Power Quality Analyzer/Power Monitor

• High speed monitoring, data and waveform capture, up to one microsecond/ channel of all power, energy, distortion and power quality parameters • Automatic circuit type verification to minimize erroneous data recording sessions • Comprehensive control of thresholds, triggers and monitoring parameters Dranetz HDPQ Xplorer/ PowerExplorer PX5 • Powerful reporting software, Dranview Professional or Dranview Enterprise, for in-depth and comprehensive reporting and analysis • Current ranges from 0.01A to 6,000A with available current probes

Dranetz HDPQ Xplorer/PowerExplorer PX5 Compatible Current Probes

Manufacturer Model Description

Dranetz Dranflex (Green) Flexible CT; 30A, 300A, and 3,000A (24”)

Dranetz Dranflex (Red) Flexible CT; 300A and 3,000A (24”)

Dranetz Dranflex 36 Flexible CT; 300A, 3,000A (36”) Available with Summit Technology 15KVP current probes & other Dranetz Dranflex 48 Flexible CT; 300A, 3,000A (48”) high voltage probe sets Dranetz Dranflex 348 Flexible CT; 3,000A 3-in 1 CT (48”)

Dranetz Dranflex6K Flexible CT; 6,000A (24”)

Dranetz Dranflex6K36 Flexible CT; 6,000A (36”)

Dranetz Dranflex HD Flexible CT; 3,000A

Dranetz Dranflex HD3 Flexible CT; 3,000A 3-in-1

Dranetz PR150SP1 150A AC/DC current probe

Dranetz PR1500SP 1,500A AC/DC current probe

Dranetz TR2510 10A rigid current probe

Fluke 3035A Flexible, 30A/300A/3,000A (24”)

Fluke 3035A3 Flexible, 30A/300A/3,000A (36”)

(866) 352-5550 | protecequip.com 93 POWER QUALITY | POWER QUALITY ANALYZERS

Power Quality Analyzers

Fluke 43B Single-Phase Power Quality Analyzer

• Measures and trends single-phase voltage to 1kV, current to 3,000A, frequency, power harmonics, voltage sags, transients and current inrush • Record two selectable parameters for up to 16 days • Internal measurement of 20 parameters • Available with FlukeView software Fluke 43B

Fluke 434/435 Three-Phase Power Quality and Energy Analyzer

• Measures three-phases with neutral at 200kS/s on each channel simultaneously • Available with a wide variety of current probes from 5A (for monitoring secondaries) to 5,000A flexible current probes • Measures and records: y Voltage (AC and DC) to 1,000V y Current (AC and DC) to 5,000A Fluke 434/435 y Peak voltage and peak current y Crest factor y Frequency y Dips and swells y Harmonics y Power and energy y Flicker y Unbalance

• Internal memory records five readings/second continuously per channel • Interharmoics, advanced energy, transient and inrush are available on Fluke 435

Fluke 434/435 Compatible Current Probes

Manufacturer Model Type Range Jaw Opening

Fluke i200s Rigid Dual: 100mA to 24A, 500mA to 200A 3/4"

Fluke i30s Rigid Single: 30mA to 20A 3/4"

Fluke i400s Rigid Dual: 500mA to 40A, 5A to 400A 1-1/4"

Fluke i5s Rigid Single: 5A to 400A 5/8"

Fluke i5sPQ3 Rigid Single: 10mA to 6A 5/8"

Fluke i600s Rigid Three: 6A to 60A, 60A to 600A, 600A to 600A 8"

94 (866) 352-5550 | protecequip.com POWER QUALITY | POWER QUALITY ANALYZERS

Power Quality Analyzers

Fluke 1735 Three-Phase Power Quality Logger

• Easily confirm instrument setup with color display of waveforms and trends • Measure all three-phases and neutral with included four flexible current probes • Current probes are connected with one plug, and the instrument automatically detects, scales and powers the probes • Easily set current probes to 15A, 150A or 3,000A for high accuracy in nearly any Fluke 1735 application • Sample rate of 10.24kHz

Fluke 1736 Three-Phase Power Quality Logger

• The ideal test tool for conducting energy studies and basic power quality logging • Automatically capture and log over 500 power quality parameters so you have more visibility into the data you need to optimize system reliability and savings • Includes four flexible current probes • Perform convenient in-the-field analysis and data checks with full graphical display on Fluke 1736 its bright, color touch screen • Sample rate of 10.24kHz

(866) 352-5550 | protecequip.com 95 POWER QUALITY | POWER QUALITY ANALYZERS

Power Quality Analyzers

Fluke 1750 Three-Phase Power Quality Logger

• Quick communications and configuration using Bluetooth-enabled device • Threshold free setup — apply thresholds after monitoring is complete using Fluke’s intuitive Power Analyze Software • Five voltage and five current inputs enable separate ground and neutral motoring • Monitors all power, energy, distortion and power quality parameters with harmonic Fluke 1750 measurement to the 50th order • Available with appropriately ranged current probes

Fluke 1750 Compatible Current Probes

Optional laptop/tablet Manufacturer Model Description provide by Protec Fluke 3310 5,000A Flex CT

Fluke 3140R 2 400A AC clamps

Fluke I5SPR 5A Clamp CT

Summit Technology PowerSight PS3550 Power Analyzer

• A true hand-held three-phase power analyzer • 68 different measurement types for regular recording of voltage, current, power, apparent power, true power factor, frequency, and THD • Has Bluetooth and USB communication capability • Surestart makes unit simple to use and setup as it provides you with warning of potential connection issues and operational setting prior to monitoring Summit Technology • Rechargeable battery operation for eight hours between charges PowerSight PS3550

96 (866) 352-5550 | protecequip.com POWER QUALITY | POWER QUALITY ANALYZERS

Power Quality Analyzers

Hioki PW3196/PW3198 Power Quality Analyzer

• Perform long-term measurements of the power quality and study problems that are difficult to detect or that occur intermittently • Manage the parameters with a control set point, such as a voltage fluctuation, flicker, and harmonic voltage • Easy to set up — just select the measurement course and the unit will do the rest • Four current and four voltage input channels • Approximately three hours of charge when running on battery life • Comes with one clamp-on current probe (500A AC), and three flexible current probes (500A to 5,000A AC)

Hioki PW3196/PW3198

(866) 352-5550 | protecequip.com 97 98 (866) 352-5550 | protecequip.com RELAY & PROTECTION | COMMUNICATIONS ANALYZERS

RELAY & PROTECTION

A significant portion of electrical power system protection of is supervised by protective relays. These devices are often the decision-making component of power system protection. They accomplish this by monitoring and analyzing conditions within their zone of protection. If they sense abnormal or fault conditions then they send signals telling other devices to interrupt or isolate the faulted circuit. These relays have evolved from a simpler electromechanical design to the more complex microprocessor-based devices that are common protection engineers today. However, if they fail to operate properly or not configured appropriately for their intended application, then they could be providing a false sense of security in conditions where the power system is left vulnerable and unprotected. Verifying settings and the proper operation of protective relays should be part of a planned testing and maintenance program. Not only do these devices need to be verified during acceptance, but periodic testing should be done to confirm their operation in response to ever growing and changing electrical systems. Protec supplies the relay and protection equipment to meet your testing needs.

Communications Analyzers

PowerComm PCA-4125 Power Communications Analyzer

• Single unit with all power communications functions: y Selective level meter y y Impedance meter y VSWR and LCR meter y Frequency response analyzer y Oscilloscope

PowerComm PCA-4125 • Field ready and complete with fittings and accessories • Save, recall and download field test setups and results • Available with power line carrier simulator and complete adapter/connector set

(866) 352-5550 | protecequip.com 99 RELAY & PROTECTION | SINGLE-PHASE TEST SETS

Single-Phase Test Sets

Doble F2253 Single-Phase Relay Test Set

• Multiple output configurations, including one voltage and one high VA current or two currents • Voltage output up to 300VAC (phase to ground) or 424VDC continuous • On-board timer, phase shifter and frequency generator Doble F2253 • Current output up to 90A AC or 60A DC continuous • Optional Doble F2010 mini controller available for fine frequency adjustments and remote control

100 (866) 352-5550 | protecequip.com RELAY & PROTECTION | THREE-PHASE TEST SETS

Three-Phase Test Sets

Doble F6150sv Power System Simulator with GOOSE

• Simple manual testing through control panel software • F6150SV model is optimized for testing IEC 61850 based protection devices (GOOSE protocol) at the process-bus level and station-bus level using sampled values and GOOSE messages Doble F6150sv • Both F6150E and F6150SV models include WiFi • Available with a preconfigured laptop computer or Doble DUC with appropriate leads and connections for most relay testing applications • Standard configuration includes three 300VAC outputs and three 30A outputs simultaneously • Software adjustment permits a variety of other configurations, including four voltages F6150, F6150E models and four currents, a single current at 675VA and much more & various variants also available • Variable phase angle, frequency generation, phase shifting and on-board DC • Suitable for testing 0.2 class metering CTs and transducers • Source for energizing relays before control power is available • Includes Doble Transwin software for COMTRADE configuration file (.cfg) playback • Optional satellite antenna provides for end-to-end testing • Optional F6051 component enables end-to-end testing with access to station time clocks • Optional Doble F6300 increases current output and quantity of channels

Doble F6150sv Compatible Accessories

Accessory Description

F6051 F6150 time synchronizer

F6071 F6150 infrared optical pickup

F6300e External amplifier (see page 100)

F6895 F6150 GPS module

RTS7 Key Available with Protec laptop

(866) 352-5550 | protecequip.com 101 RELAY & PROTECTION | THREE-PHASE TEST SETS

Three-Phase Test Sets

Doble F6300e External Amplifier

• Used with a power system simulator for critical high burden relay testing • 12 enhanced current sources for running high burden and amplitude faults • Test bus power system models up to six current nodes • Multiple sources in one amplifier reduce the number of boxes needed for testing Doble F6300e • Works with Doble Protection Suite or third party software

Manta MTS-5100 Protective Relay Test System

• Automatic reporting with no external software or PC required • Operation with or without PC, steady state testing, dynamic testing and transient waveform testing • High VA output • Six AC/DC current outputs and four AC/DC voltage outputs Manta MTS-5100 • 12 contact (0 to 250V) inputs and four contact outputs • 120V / 60Hz, 230V / 50Hz operational

Megger SMRT36 Relay Test System

• Three convertible channels (300V or 15A), three 60A channels, 10 binary inputs and 6 binary outputs • Bluetooth, USB or Ethernet communication between SMRT36 and computer • Megger’s Smart Touch View Interface (STVI) provides simple touchscreen graphical interface for testing most relays Megger SMRT36 • High current output suitable for modern and electromechanical applications • Complex impedance testing simplified with built-in relay library

102 (866) 352-5550 | protecequip.com RELAY & PROTECTION | THREE-PHASE TEST SETS

Three-Phase Test Sets

Megger SMRT46 Multi-Phase Relay Test System

• Multipurpose, lightweight, field portable test set capable of testing a wide variety of electromechanical, solid-state and microprocessor-based protective relays, motor overload relays and similar protective devices • Intuitive manual operation with Smart View Interface • 60Amps / 300VA RMS per phase Megger SMRT46 • Four voltage channels, three current channels, with convertible voltage channels provides one voltage and six currents

Megger SMRT410 Relay Test System

• Offers the “Smart” combination of high compliance voltage and high current output to test all electromechanical, solid-state and microprocessor-based overcurrent relays • Intuitive manual operation with Smart Touch View Interface • High current, high power output (60Amps / 300VA RMS) per phase

Megger SMRT410 • Flexible output design provides up to four-phase voltage and up to 10-phase current • Fully automated testing using AVTS software

Omicron CMC 356 Universal Relay Test Set and Commissioning Tool

• Standard configuration includes six current outputs (in three-phase mode, 64A/860VA per channel or one channel at 128A / 1,000VA) for maximum flexibility and range of applications • Optional GPS or IRIG-B accessories for end-to-end testing Omicron CMC 356 • Simulates transient faults, power swing, CT saturation, CB or Rogowski coil simulation • 10 binary inputs (dry/wet) • On-board 10-channel recorder for typical power values, transients, trend recordings and harmonic analysis

Omicron Recloser Control Cable Packages

RST1 (14 Pin) RCP1 (19 Pin) RVT1 (32 Pin)

(866) 352-5550 | protecequip.com 103 104 (866) 352-5550 | protecequip.com TRANSFORMER TEST & DIAGNOSTICS | CURRENT TRANSFORMER TEST SETS

TRANSFORMER TEST & DIAGNOSTICS

Transformers are an essential component of the electrical power system. They are at the very heart of electrical power distribution systems. Misoperation or failure of these components not only have the potential for limiting the ability to deliver electricity, but could also result in very costly damages to the power system and its components. If maintained and serviced regularly transformers can be extremely reliable and provide service for long periods of time. It is therefore important to have a well-planned testing and maintenance routine that will ensure the longevity and reliability of these critical power system components. Since replacement of a large transformer can take as much as a year or more, diagnostics and trending tests can be of great value in determining a transformer’s predicted end of life and can assist in the planning of its replacement Protec offers a comprehensive range of transformer testing and diagnostics tools, from multiple manufacturers, for the purpose of ensuring the health of your assets.

Current Transformer (CT) Test Sets

Megger MRCT Relay and Current Transformer Tester

• Allows simultaneous measurement on all taps eliminating the need to test each tap sequentially and independently • Automatically perform preset test routines on all taps without changing leads and at a single push of a button • Multiple instantaneous saturation curves and their knee points are plotted and Megger MRCT calculated on the fly as the test is being performed • All test results can be stored within the MRCT where they are saved in a versatile format that can be exported into PowerDB

(866) 352-5550 | protecequip.com 105 TRANSFORMER TEST & DIAGNOSTICS | CURRENT TRANSFORMER TEST SETS

Current Transformer (CT) Test Sets

Omicron CT Analyzer Current Transformer Testing, Calibration and Assessment

• Evaluates CTs to the IEC or IEEE standard within seconds with push-to-test convenience • Ideal for on-site, lab or factory testing and calibration of metering and protection CTs • High measurement accuracy: 0.02% (suitable for class 0.1 metering CTs) Omicron CT Analyzer • Tests run at 120V to ensure operator safety • Remote control software provides full access to all CT analyzer functions, enables saved test procedures and exports data to Excel or Word

Omicron TESTRANO 600 Three-Phase Power Transformer Test System

• Tests Include: y TTR y Exciting current y DC winding resistance y Dynamic resistance y Vector group check y Cool down test Omicron TESTRANO 600 y Short-circuit impedance/leakage reactance y Frequency response of stray losses y Demagnetization y Power/dissipation factor (with CP TD12) y Quick test

• Powerful device with 3A x 33A DC or 400VAC • Automatic tap changer control and measurement

Raytech CT-T1 Current Transformer Tester

• Microprocessor-based CT test system measures CT excitation, current ratio and winding polarity • Single connection harness permits all taps to be tested automatically, without user intervention • Measures ratios from 0.9 to 15,000:1

Raytech CT-T1 • 2,000V output with resolution of 10mV • 10A current output with resolution of 0.01mA

106 (866) 352-5550 | protecequip.com TRANSFORMER TEST & DIAGNOSTICS | CURRENT TRANSFORMER TEST SETS

Current Transformer (CT) Test Sets

Vanguard EZCT/EZCT-10 Automated CT Test Set

• Measures excitation voltage and current, turns ratio, winding polarity on single-phase and multi-phase CTs • Excitation voltages up to 1,200V, current to 2A (at 200V) • Operation from front panel or through computer control Vanguard EZCT/EZCT-10 • Capable of testing turns ratios from 0.8 through 5,000:1 • EZCT-10 model increases excitation current to 10A (at 200V)

Vanguard EZCT-2000A Automated CT Test Set

• Measures excitation voltage and current, turns ratio, winding polarity on single and multi-tap CTs • Excitation voltages to 2,000V AC, current up to 10A (at 300V) Vanguard EZCT-2000A • Fully automated, connects to all CT output terminals simultaneously — no lead switching required • CT ratio and excitation knee point calculated and charted automatically • Five voltage test settings — 50V, 300V, 500V, 1,200V and 2,000V AC • Measures DC resistance in CT windings

Vanguard EZCT-2000C Plus Automated CT Test Set

• Fully automated testing by front panel, Android app or computer-controlled through PC software

Vanguard EZCT- • Automatically demagnetizes CT when performing CT excitation test 2000C Plus • Internal storage of test plans — easy setup of test plans or quick manual testing through front panel controls • Connects to all secondary terminals of the CT for fully automated testing without user intervention • Plots multiple saturation curves for comprehensive and professional report generation

(866) 352-5550 | protecequip.com 107 TRANSFORMER TEST & DIAGNOSTICS | OIL TEST EQUIPMENT

Oil Test Equipment

Manufacturer Model Voltage Level

Doble OTC Oil Test Cell

High Voltage DTS-60A 60kV

Megger OTS-60PB 60kV

HV Diagnostics BA-75 75kV

High Voltage DTS-100D 100kV

Doble OTC Megger OTS-60PB HV Diagnostics BA-75

High Voltage DTS-60A Oil Dielectric AC Test Set

• Performs repeatable, accurate measurement of breakdown voltage of insulating oils • Three rates of rise: 500V / 2,000V / 3,000V per second • Arc detection with automatic shutdown and measurement hold • Window panel for observation • Full programming and automation with on-board printer, internal results storage and RS-232 interface, user defined test sequences and temperature sensor High Voltage DTS-60A

108 (866) 352-5550 | protecequip.com TRANSFORMER TEST & DIAGNOSTICS | POWER FACTOR TEST SETS

Power Factor Test Sets

Doble M4000/M4100 Power Factor Test Set

• Rugged construction for field use with laboratory accuracy and precision • Industry standard for testing electrical apparatus such as transformers, generators and cables Doble M4000/M4100 • Evaluates integrity of high voltage substation apparatus by measuring power factor/tan delta • Measures capacitance to evaluate physical changes • Measures accurately in high electrostatic and electromagnetic conditions • Measures excitation current to evaluate transformer magnetizing circuit • Line frequency modulation technology eliminates substation interference • Automated testing procedures through DTA or manual through M4000 clipboard • Available with an M4000 and DTA preconfigured laptop computer or DUC; and all application appropriate accessories • Internal field calibration reference ensures accurate testing Doble M4110 • Built-in diagnostics provide information on instrument status • Output current to 300mA at 10kV (total output power 3kVA) for better replication of in-service conditions • Optional Type C resonator increases output capacity • Optional M4110 Leakage Reactance Module available for measuring the impedance of the apparatus under test • Optional M4140 Capacitor Bank Test Kit available for measuring capacitance of capacitor banks • Optional liquid insulation test cell for measuring insulating characteristics of oil Doble M4140 • Optional TTR capacitor for measuring transformer ratio

Doble Type C Resonating Inductor

• Used in conjunction with the Doble M4000/M4100 to provide extra current needed for high voltage test levels • Iron core reactor with adjustable air gap • Capable of resonating capacitance of 0.05 to 1.0μF at 10kV 60Hz

Doble Type C

(866) 352-5550 | protecequip.com 109 TRANSFORMER TEST & DIAGNOSTICS | POWER FACTOR TEST SETS

Power Factor Test Sets

Megger CB100 Power Factor Test Set

• Lightweight and portable (21 lbs) • Output of 26V at 100Hz minimizes 60Hz interference • Performs UST and GST configuration testing • Direct reading of capacitance and dissipation factor Megger CB100 • Simple manual interface • Optimal for transformer dry out

Megger DELTA4310 Power Factor Test Set

• Fully automatic insulation power factor/dissipation factor test set up to 12kV • Suitable for testing transformers, bushings, circuit breakers, cables, lightning arresters and rotating machinery • Measures excitation current of transformer windings, automatic tip-up tests and HV turns-ratio testing (with optional TTR capacitor)

Megger DELTA4310

Megger MIT525 Insulation Resistance Meter

• Simple to use with intuitive controls and features • Battery operated • Performs PI, step voltage, dielectric discharge, dielectric absorption ratio automatically • Burn and breakdown functions available in insulation resistance mode Megger MIT525

110 (866) 352-5550 | protecequip.com TRANSFORMER TEST & DIAGNOSTICS | POWER FACTOR TEST SETS

Power Factor Test Sets

Omicron CPC 100 Multifunctional Primary Test System

• A complete transformer test system, including 12kV power factor tests • Measures capacitance, dissipation factor tan δ (tan delta), power factor COS φ, watts losses, power (effective power, apparent power and reactive power), and impedance (absolute value, phase, inductance, resistance, quality) with optional Omicron CPC 100 CP TD1 component • On-board computer driven test plans to replicate or trend power factor tests with existing values • Applies up to 12kV at variable frequencies which enhances diagnosis of insulation aging • Automatic power factor testing via Omicron’s Primary Test Manager software with the included preconfigured laptop computer or via front panel controls (includes test templates) • Provides for automated testing of power transformers, CTs, VTs, resistance testing and Omicron CP TD1 more • Optimal for emergent requirements or remote applications; one device replaces multiple instruments • Stand alone functionality for: y Ratio, burden and polarity, phase and magnitude error, excitation curve, winding resistance, secondary burden and dielectric withstand tests for CTs and PTs y Ratio, winding resistance, tap changer testing, excitation current, short circuit impedance measurement and leakage reactance testing of transformers y Contact resistance, winding resistance, ground resistance or measurement of complex impedances Omicron CP B2 y Single-phase testing of primary and secondary relays (including overcurrent, overvoltage, undervoltage and frequency relays)

• 2kV AC voltage source current source to 400A DC and 800A AC • Optional CP CB2 boosts current output to 2,000A AC • Optional CP TD12 for performing power/dissipation (tan delta) factor and capacitance measurements • More CPC-100 accessories available on pages 32, 33 and 49 Omicron CP TD12

Omicron CP SB1 Switch Box for Automated Transformer Testing

• Used with Omicron CPC-100 and TD-1 • Provides connections for three-phase winding resistance and three-phase TTR measurements • Primary test manager software provides automated (sequential) testing of all phases and each tap changer position Omicron CP SB1 • Permits one-time cable connections reducing time spent connecting cables • Minimizes erroneous results with automated testing

(866) 352-5550 | protecequip.com 111 TRANSFORMER TEST & DIAGNOSTICS | SWEEP FREQUENCY RESPONSE ANALYZERS

Sweep Frequency Response Analyzers

Doble M5400 Sweep Frequency Response Analyzer

• Analyzes the winding relationship inside a transformer • Optimal for winding movement assessment after transport, high magnitude faults and lightning strikes • Simple hookup and automated testing • Results management software for establishment of baseline data and trending • Available with a preconfigured laptop Doble M5400

Megger IDAX300 Insulation Diagnostic Analyzer

• State-of-the-art measurement of moisture content, tan delta and oil conductivity using dielectric frequency response • Dedicated test procedures for power transformers, bushings and current transformers Megger IDAX300 • Reliable measurements even in high-interference environments • Interfaces to high voltage amplifiers • Easy-to-use software with automated measurement flow and analysis of test results

Omicron FRANEO 800 Sweep Frequency Response Analyzer

• Tests the mechanical and electrical integrity of power transformers after transportation or exposure to high fault currents

Omicron FRANEO 800 • Measures the electrical transfer function over a wide range of frequencies • Improves transformer reliability, reduces maintenance costs and prevents expensive failures • Applications include transformer testing after: y A short-circuit event y Before and after transport y An occurrence of high transient fault currents y A significant change in the monitored values (for example, combustible gases) or a safety shutdown

112 (866) 352-5550 | protecequip.com TRANSFORMER TEST & DIAGNOSTICS | SWEEP FREQUENCY RESPONSE ANALYZERS

Sweep Frequency Response Analyzers

Megger FRAX101 Sweep Frequency Response Analyzer

• Highest dynamic range and accuracy in the industry • Fulfills international standards for SFRA measurements • Wireless communication • Battery operated Megger FRAX101 • Continuity control of ground connections • Detects problems such as: y Winding deformations and displacements y Shorted turns and open windings y Broken clamping structures y Core connection problems y Partial winding collapse y Faulty core grounds y Core movements

(866) 352-5550 | protecequip.com 113 TRANSFORMER TEST & DIAGNOSTICS | TURNS RATIO TEST SETS

Turns Ratio Test Sets

AEMC DTR8510 Digital Transformer Ratiometer

• Ideal for testing PTs, CTs (ratio and polarity) and some power transformers • Displays turns ratio, winding polarity, excitation current and deviation from nameplate data • Warns of incorrect lead connections, reverse polarity and open/short circuits • DC test mode eliminates errors resulting from magnetic build up • Records up to 10,000 results which can be downloaded to dataview software for AEMC DTR8510 trending and reporting

Haefely 2293 Automatic Transformer Winding Analyzer

• Optimized for three-phase power and distribution transformer measurements • Combines winding resistance measurement, turns ratio, dynamic resistance measurement, core demagnetization, transformer type detection, magnetic balance, short circuit impedance and heat run test • Simple “one-time-connection” system reduces measuring time Haefely 2293 • Built-in simultaneous winding magnetization method guarantees fast and reliable resistance measurements • Stable measurements are reached even on large power transformers with delta windings on the low voltage side

Megger MWA330A Three-Phase Transformer Turns Ratio and Winding Resistance Analyzer

• Combines TTR and resistance testing in one box • Only one set of leads is required • Unique Kelvin clamps with patented adjustable jaws each open to 100mm (4") as well Megger MWA330A as banana plug input for connection to terminal blocks • Built-in demagnetization

114 (866) 352-5550 | protecequip.com TRANSFORMER TEST & DIAGNOSTICS | TURNS RATIO TEST SETS

Turns Ratio Test Sets

Megger TTR310 Three-Phase Transformer Turns Ratio Test Set

• Stand-alone or remote-control operation • Accurately measures ratio, phase deviation and excitation current • Field upgradeable without compromise to calibration Megger TTR310 • Works in the presence of high interference/high voltage • Highest ratio measurement (45,000:1); highest accuracy (0.1%)

Omicron TESTRANO 600 Three-Phase Power Transformer Test System

• Tests include: y TTR y Exciting current y DC winding resistance y Dynamic resistance y Vector group check y Cool down test y Short-circuit impedance/leakage reactance Omicron TESTRANO 600 y Frequency response of stray losses y Demagnetization y Power/dissipation factor (with CP TD12) y Quick test • Powerful device with 3 x 33A DC or 400VAC • Reduced wiring effort as same wiring can be used for different tests • Automatic tap changer control and measurement

Raytech T-Rex Three-Phase Voltage Extension to Turns Ratio Meter

• Fully automatic with seamless integration to Raytech TR-Mark II • Measure phase relationships of transformer windings while applying three-phase voltage • Especially useful when measuring ratio of zig-zag type transformers

Raytech T-Rex

(866) 352-5550 | protecequip.com 115 TRANSFORMER TEST & DIAGNOSTICS | TURNS RATIO TEST SETS

Turns Ratio Test Sets

Raytech TR-1/TR-1P Single-Phase Transformer Turns Ratio Meter

• Lightweight and battery operated (7 lbs) • Measures transformer, PT or CT ratio and polarity • Raytech TR-1P includes on-board printer • Internal storage of 50 test results • Ratio measurement from 0.8 to 4,000 turns Raytech TR-1/TR-1P

Raytech TR-Mark III Three-Phase Transformer Turns Ratio Meter

• Simplified and convenient touchscreen user interface for test setup, results display and documentation storage • Automatic measurements of voltage, turns ratio, current and phase displacement • Automatic phase vector detection and includes percent error vs. nameplate data for secondary and tertiary windings • On-board or computer based user configured transformer test plans and graphical Raytech TR-Mark III tap changer display • Optional Raytech T-Rex automates testing by measuring phase relationships of transformer windings while applying three-phase voltage

Vanguard ATRT-01/01B Single-Phase Transformer Turns Ratio Meter

• Displays turns ratio, winding polarity, excitation current and deviation from nameplate data • Measures turns ratios from 0.8 to 15,000:1 • Output voltage of 4V or 40V (user selectable) • Operates from faceplate with simple controls or automated testing through Vanguard ATRT-01/01B Vanguard’s TTRA S2 transformer analysis software

116 (866) 352-5550 | protecequip.com TRANSFORMER TEST & DIAGNOSTICS | TURNS RATIO TEST SETS

Turns Ratio Test Sets

Vanguard ATRT-03A S2 Three-Phase Transformer Turns Ratio Meter

• Measures turns-ratio, excitation current and phase angle readings • Built-in transformer detection automatically identifies 130 different transformer configurations • Measures ratios from 0.8 to 15,000:1 • Stores up to 128 transformer test plans in memory Vanguard ATRT-03A S2 • Stores up to 112 sets of test results in on-board memory • Simplified data transfer through USB flash drive

Vanguard TRF-100 Three-Phase Transformer Turns Ratio Meter

• Measures a transformer’s turns-ratio, excitation current, and winding phase angle • Three test voltages (4Vac, 40Vac, 100Vac) allow the TRF-100 to test CT’s and PT’s • Highest ratio measurement (50,000:1) • Phase angle measurement (0 to 360°) • To ensure accuracy, the TRF-100’s measuring circuitry self-calibrates before each Vanguard TRF100 measurement

Vanguard TRF-250A Three-Phase Transformer Turns Ratio Meter

• Determines the turns-ratio of the transformer under test using the IEEE C57.12.90 measurement method • Turns-ratio range is from 0.8 to 50,000:1 • Transformer turns ratio, excitation current, and winding polarity are displayed on the built-in 128 x 64 pixels graphic LCD screen Vanguard TRF-250A • Can be used as a standalone unit or can be computer-controlled • The battery offers approximately three hours of continuous use

(866) 352-5550 | protecequip.com 117 TRANSFORMER TEST & DIAGNOSTICS | TURNS RATIO TEST SETS

Turns Ratio Test Sets

Vanguard TRI-PHASE True Three-Phase Transformer Turns Ratio Meter

• Generates true three-phase excitation test voltage so any transformer type can be measured, including exotic winding configurations • Ideal for use on phase shifting winding configurations • Measures turns-ratio, excitation current and phase angle readings • Built-in transformer detection automatically identifies 130 different transformer Vanguard TRI-PHASE configurations • Measures ratios from 0.8 to 15,000:1 • Simplified data transfer through USB flash drive

118 (866) 352-5550 | protecequip.com TRANSFORMER TEST & DIAGNOSTICS | WINDING RESISTANCE TEST SETS

Winding Resistance Test Sets

Haefely 2293 Automatic Transformer Winding Analyzer

• Optimized for three-phase power and distribution transformer measurements • Combines winding resistance measurement, turns ratio, dynamic resistance measurement, core demagnetization, transformer type detection, magnetic balance, short circuit impedance and heat run test • Simple “one-time-connection” system reduces measuring time Haefely 2293 • Built-in simultaneous winding magnetization method guarantees fast and reliable resistance measurements • Stable measurements are reached even on large power transformers with delta windings on the low voltage side

Megger MWA330A Three-Phase Transformer Turns Ratio and Winding Resistance Analyzer

• Combines TTR and resistance testing in one box • Only one set of leads is required • Unique Kelvin clamps with patented adjustable jaws each open to 100mm (4") as well Megger MWA330A as banana plug input for connection to terminal blocks • Portability, reduced set-up time and increased job safety • Built-in demagnetization • One test form — easier and faster to complete

Raytech WR14 Winding Resistance Meter with Demagnetization and Discharge

• 15A output for testing most transformers with repeatable readings • Automatically demagnetizes winding upon test completion • Two measurement channels and on-board printer convenience • Bright touchscreen interface or full computer control • Color coded connections and simple interface for fast familiarization • Automatic discharge circuit Raytech WR14

(866) 352-5550 | protecequip.com 119 TRANSFORMER TEST & DIAGNOSTICS | WINDING RESISTANCE TEST SETS

Winding Resistance Test Sets

Raytech WR50-12 Winding Resistance Meter with Demagnetization and Discharge

• 50A output for testing the largest transformers with repeatable readings • Automatically demagnetizes winding upon test completion • Two measurement channels and on-board printer convenience • Color-coded connections and simple interface for fast familiarization • Automatic discharge circuit • Optional Heat Run Test Software and three RTD inputs Raytech WR50-12

Vanguard LTCA-40 Load Tap Changer Analyzer

• Controls tap changer from the front panel • Measures winding resistance of highly inductive power transformers • Measures and graphs LTC motor current with dynamic resistance measurements • Calculates equivalent resistance values with user’s input of apparatus temperature Vanguard LTCA-40 • Outputs 40A with a 60V DC source • Automatic discharge to ensure operator safety • Measures from 1μΩ to 500Ω

Vanguard TRM-403 Transformer Resistance Meter

• Connects to all three-phases (one winding) simultaneously: one test for the primary, one test for the secondary • Provides individual Delta or Wye (with no neutral) winding resistance values • Ideal for measuring winding resistance of transformers, motors or generators and other inductive devices Vanguard TRM-403 • Automatic demagnetization of winding • Automatic discharge upon completing the test • Make-before-break mode provides a dynamic resistance graph of the load tap changer

120 (866) 352-5550 | protecequip.com TRANSFORMER TEST & DIAGNOSTICS | WINDING RESISTANCE TEST SETS

Winding Resistance Test Sets

Vanguard WRM-10 Winding Resistance Test Set

• Single channel winding resistance test set • Automatic current from 10mA to 10A • Digital resistance reading from 1µΩ to 2,000Ωs • Dual input channels measure two winding resistances simultaneously Vanguard WRM-10

(866) 352-5550 | protecequip.com 121 122 (866) 352-5550 | protecequip.com INDEX

Index

A ABB 504 ...... Secondary Current Injection Test Set...... 65 ABB 505 ...... Secondary Current Injection Test Set...... 65 ABB 606 ...... Secondary Current Injection Test Set...... 65 ABB 607 ...... Secondary Current Injection Test Set...... 65 ABB BTSB ...... Secondary Current Injection Test Set...... 65 ABB CB-2000 ...... Portable Capacitance Meter...... 35, 72 ABB Ekip ...... Secondary Current Injection Test Set...... 65 ABB PR010/T ...... Secondary Current Injection Test Set...... 65 AEMC 275HVD ...... Non-Contact Voltage Detector...... 23 AEMC 3711/3731 ...... Clamp On Ground Resistance Test Set...... 29 AEMC 6240/6250 ...... 10A Micro-Ohmmeter...... 38, 53 AEMC 6416 ...... Clamp On Ground Resistance Tester...... 29 AEMC 6536 ...... Insulation Resistance Test Sets...... 63 AEMC BR07 ...... Decade Box...... 73 AEMC DTR8510 ...... Digital Transformer Ratiometer...... 114 AEMC PEL 103 ...... Power and Energy Logger...... 92 AEMC PEL 105 ...... Power and Energy Logger...... 92 Alber Cellcorder CRT-400 ...... Cell Resistance Tester...... 3 Alber Cellcorder CRT-400 ...... Cell Resistance Tester...... 2 Alber DMA-35-CR ...... Hydrometer with Data Logging...... 2 Allen-Bradley140G-ELTT ...... Secondary Current Injection Test Set...... 65 Ametek CTC-650A ...... Dry Block Calibrators...... 75 Amprobe ACD-15 TRMS-PRO ...... Multifunction Multimeter...... 81 Amprobe AT-3000 ...... Underground Cable Locator...... 7 Amprobe AT-7030 ...... Advanced Wire Tracer Kit...... 8 Amprobe DM-5 ...... Power Quality Analyzer...... 92 Aqua-Tronics EG 3000/EG 3000 T ...... Secondary Cable Fault Locator...... 8 Aqua-Tronics S.D.A.D...... Acoustic Fault Detector...... 8 Arbiter 928A ...... Multifunction Multimeter...... 81 Arbiter 930A ...... Power Analyzer...... 93 Astro-Med (AstroNova) TMX-18 ...... 18-Channel Data Acquisition System...... 91

B Battery Ground Fault...... 1 Battery Hydrometers...... 2 Battery Impedance...... 3 Battery Load Units...... 4 Battery Test Equipment...... 1 Battery Voltage Monitors...... 5 Bender LT3000 ...... Line Isolation Monitor...... 23, 30 B&K Precision 885 ...... LCR/ESR Meter...... 35, 72 Borescopes...... 71

C Cable & Bus Test Equipment...... 7 Cable Fault Locating Test Sets...... 7, 8, 9, 10, 11, 12 Capacitance & Inductance Meters...... 72 Capacitance & Inductance Test Sets...... 35 Carriere STS100 ...... Secondary Current Injection Test Set...... 65 Circuit Breaker Timing Test Sets...... 36, 37 Communications Analyzers...... 99 Cooper Power Systems Eaton DC Nova ...... Adaptor...... 50 Cooper Power Systems Eaton KMET1 MET ...... Recloser Controller Tester...... 50 Cooper Power Systems Eaton KMET45811 ...... Triple / Single Adaptor...... 50 Cooper Power Systems Eaton ...... VFI VFI Tester...... 50 COSA Xentaur XPDM ...... Portable Dew Point Meter...... 74 Current Transformer (CT) Test Sets...... 105

(866) 352-5550 | protecequip.com 123 INDEX

D Data Acquisition...... 91 Decade Boxes...... 73 DENT ELITEpro ...... Power Datalogger...... 91 Dew Point & Humidity Analyzers...... 74 Digital Low Resistance Ohmmeters...... 38, 39, 40, 41, 53, 54, 55, 56 DILO 3-027-R002 ...... SF6 Volume Percentage (Purity) Analyzer...... 25 DILO 3-033-R002 ...... LeakPointer SF6 Leak Detector...... 25 DILO 3-033-R200 ...... LeakSpy SF6 Leak Detector...... 26 DILO 3-038-R032 NP ...... SF6 and CF4 Analyzer...... 26 DILO 3-038R-R303 ...... SF6 Analyzer with Recirculation...... 26 DILO SF6 Analyzer ...... Adapter Kit Regulator, Fitting and Adaptor Kit for SF6 Analysis...... 26, 27, 28 DILO SF6 HB 120A ...... Cylinder Heating Blanket...... 27 Doble 9084UC ...... Transducer Test Set...... 51 Doble F2253 ...... Single-Phase Relay Test Set...... 100 Doble F6051 ...... Time Synchronizer for F6150...... 101 Doble F6071 ...... Infrared Optical Pickup for F6150...... 101 Doble F6150sv ...... Compatible Accessories...... 101 Doble F6150sv ...... Power System Simulator with GOOSE...... 101 Doble F6300e ...... External Amplifier...... 101, 102 Doble F6895 ...... GPS Module for F6150...... 101 Doble M4000/M4100 ...... Power Factor Test Set...... 47, 109 Doble M4110 ...... Leakage Reactance Module...... 47, 109 Doble M4140 ...... Capacitor Bank Test Kit...... 47, 109 Doble M5400 ...... Sweep Frequency Response Analyzer...... 112 Doble OTC ...... Oil Test Cell...... 108 Doble RTS7 ...... Key for F6150...... 101 Doble TDR9100/TDR900 ...... Circuit Breaker Test System...... 36 Doble TR3171 ...... Motion/Travel Transducer...... 51 Doble TR3186 ...... Transducer Test Set...... 51 Doble TR3189 ...... Transducer Test Set...... 51 Doble TR3190 ...... Transducer Test Set...... 51 Doble TRMLP50 ...... Transducer Test Set...... 51 Doble Type C ...... Resonating Inductor...... 47, 109 Dranetz Dranflex6K36 ...... Current Probe...... 93 Dranetz Dranflex6K ...... Current Probe...... 93 Dranetz Dranflex 36 ...... Current Probe...... 93 Dranetz Dranflex 48 ...... Current Probe...... 93 Dranetz Dranflex 348 ...... Current Probe...... 93 Dranetz Dranflex (Green) ...... Current Probe...... 93 Dranetz Dranflex HD3 ...... Current Probe...... 93 Dranetz Dranflex HD ...... Current Probe...... 93 Dranetz Dranflex (Red) ...... Current Probe...... 93 Dranetz HDPQ Xplorer/PowerExplorer PX5 Compatible Current Probes...... 93 Dranetz HDPQ Xplorer ...... Power Quality Analyzer...... 93 Dranetz PowerExplorer PX5 ...... Power Monitor...... 93 Dranetz PR150SP1 ...... Current Probe...... 93 Dranetz PR1500SP ...... Current Probe...... 93 Dranetz TR2510 ...... Current Probe...... 93 Dry Block Calibrators...... 75

E EA Technology CableData Collector ...... Partial Discharge Analyzer...... 18, 88 EA Technology UltraTEV Plus2 ...... Multifunction Partial Discharge Analyzer...... 18, 88 Eaton Cutler-Hammer 70C1056G54 ...... Secondary Current Injection Test Set...... 65 Eaton Cutler-Hammer 70C1056 ...... Secondary Current Injection Test Set...... 65 Eaton Cutler-Hammer 140D481G03...... Secondary Current Injection Test Set...... 65 Eaton Cutler-Hammer 1232C50G05 ...... Secondary Current Injection Test Set...... 65 Eaton Cutler-Hammer 1232C50G10 (STK2) ...... Secondary Current Injection Test Set...... 65 Eaton Cutler-Hammer 1287C56G02 ...... Secondary Current Injection Test Set...... 65 Eaton Cutler-Hammer 7801C57 ...... Secondary Current Injection Test Set...... 65 Eaton Cutler-Hammer 8779C02G03 ...... Secondary Current Injection Test Set...... 65 Eaton Cutler-Hammer MTK1000 ...... Secondary Current Injection Test Set...... 65 Eaton Cutler-Hammer MTK2000 ...... Secondary Current Injection Test Set...... 65

124 (866) 352-5550 | protecequip.com INDEX

Eaton Cutler-Hammer PRTAAPM ...... Secondary Current Injection Test Set...... 66 Electrical Safety...... 23, 24 Electrical Test Instruments ETI ACDC-10 ...... AC and DC Power Supply...... 82 Electrical Test Instruments ETI-AD-1/AD-2 ...... AC and DC Power Supply...... 82 Electrical Test Instruments ETI PI-1600B ...... 16,000A High Current Test Set...... 57 Electrical Test Instruments ETI PI-5000/PI-6000 ...... 40,000A/60,000A High Current Test Set...... 58 Emerson 475/475FB ...... Multifunction Multimeter...... 81 ETI PI-800 ...... Primary Current Injection Test Set...... 64 ETI PI-1600B Duty Cycles...... 57 ETI PI-1600B ...... Primary Current Injection Test Set...... 64 ETI PI-5000 Duty Cycles...... 58 ETI PI-5000 ...... Primary Current Injection Test Set...... 64 ETI PI-6000 Duty Cycles...... 58 ETI PI-6000 ...... Primary Current Injection Test Set...... 64 Extech HDV640 HD ...... VideoScope Articulating Probe...... 71

F Federal Pioneer DDT-USRC ...... Secondary Current Injection Test Set...... 66 FLIR C2 ...... Compact Thermal Camera...... 76 FLIR T440 ...... Thermal Imaging Camera...... 76 FLIR T530 ...... Professional Thermal Camera...... 76 FLIR T640 ...... Thermal Imaging Camera...... 77 Fluke 43B ...... Single-Phase Power Quality Analyzer...... 81, 94 Fluke 87V ...... Multifunction Multimeter...... 81 Fluke 190-204/S ...... Multifunction Multimeter...... 81 Fluke 192 ...... Multifunction Multimeter...... 81 Fluke 434/435 ...... Compatible Current Probe...... 94 Fluke 434/435 ...... Three-Phase Power Quality and Energy Analyzer...... 94 Fluke 435 ...... Multifunction Multimeter...... 81 Fluke 754 ...... Multifunction Multimeter...... 81 Fluke 787 ...... Multifunction Multimeter...... 81 Fluke 810 ...... Multifunction Multimeter...... 81 Fluke 1587 FC ...... Insulation Multimeter...... 63, 81 Fluke 1587MDTFC ...... Insulation Resistance Test Sets...... 63 Fluke 1625 ...... Multifunction Geo Earth Ground Test System...... 30 Fluke 1735 ...... Three-Phase Power Quality Logger...... 95 Fluke 1736 ...... Three-Phase Power Quality Logger...... 95 Fluke 1750 ...... Compatible Current Probes...... 96 Fluke 1750 ...... Three-Phase Power Quality Logger...... 96 Fluke 3035A3 ...... Current Probe...... 93 Fluke 3035A ...... Current Probe...... 93 Fluke 3140R ...... Current Probe...... 96 Fluke 3310 ...... Current Probe...... 96 Fluke 9040 ...... Phase Rotation Indicator...... 78 Fluke i5s ...... Current Probe...... 94 Fluke i5sPQ3 ...... Current Probe...... 94 Fluke I5SPR ...... Current Probe...... 96 Fluke i30s ...... Current Probe...... 94 Fluke i200s ...... Current Probe...... 94 Fluke i400s ...... Current Probe...... 94 Fluke i600s ...... Current Probe...... 94 Fluke Networks OptiFiber Pro Series 2 ...... Optical Time Domain Reflectometer (OTDR)...... 9 Fluke PMM-1 ...... Multifunction Multimeter...... 81 Fluke Ti55 ...... Thermal Imager...... 77 Fluke Ti450 ...... SF6 Gas Detector...... 27 Fuji FLD22 ...... Transducer Test Set...... 51

G Gas & SF6 Analysis ...... 25, 26, 27, 28 GE DEH-233 ...... Secondary Current Injection Test Set...... 66 GE GTUTK20 ...... Secondary Current Injection Test Set...... 66 General Resistance DA-RTD-200 ...... Decade Box...... 73 GE PST1-1 ...... Secondary Current Injection Test Set...... 66 GE TAKTS2 ...... Secondary Current Injection Test Set...... 66

(866) 352-5550 | protecequip.com 125 INDEX

GE TTS1 ...... Secondary Current Injection Test Set...... 66 GE TVRMS2 ...... Secondary Current Injection Test Set...... 66 GE TVTS1 ...... Secondary Current Injection Test Set...... 66 Ground Cluster ...... Available in Multiple Configuration...... 24 Ground Resistivity...... 29, 30, 31, 32, 33

H Haefely 2293 ...... Automatic Transformer Winding Analyzer...... 114, 119 Hart Scientific 9100S-A ...... Dry Block Calibrators...... 75 Hart Scientific 9100S ...... Dry Block Calibrators...... 75 Hart Scientific 9103-A ...... Dry Block Calibrators...... 75 Hart Scientific 9140-A ...... Dry Block Calibrators...... 75 Hart Scientific 9141-A ...... Dry Block Calibrators...... 75 High Current Test Sets...... 57, 58, 59, 60, 61, 62 High Voltage ALT-120/60 ...... 60kV and 120kV Power Frequency AC Hipot...... 13, 42 High Voltage Circuit Breaker & Substation...... 35 High Voltage DTS-60A ...... Oil Dielectric AC Test Set...... 108 High Voltage DTS-100D ...... Oil Dielectric AC Test Set...... 108 High Voltage PFT-301CM ...... 30kV Power Frequency AC Hipot...... 13, 42 High Voltage PFT-303 ...... 30kV Power Frequency AC Hipot...... 13, 42 High Voltage PFT-303/PFT-503CM ...... 30kV and 50kV AC Hipot...... 59 High Voltage PFT-503CM ...... 50kV Power Frequency AC Hipot...... 14, 43 High Voltage PFT-652CM 6...... 5kV Power Frequency AC Hipot...... 14, 43, 59 High Voltage PTS-75/PTS-80 ...... 75kV and 80kV DC High Voltage Test Set and Megohmmeter...... 14, 43 High Voltage PTS-130 ...... 130kV DC Hipot and Megohmmeter...... 15, 44 High Voltage PTS-200 ...... 200kV DC Hipot and Megohmmeter...... 15, 44 High Voltage Tan Delta Measurement Systems...... 21 High Voltage TD-34E ...... Tan Delta Bridge...... 21 High Voltage TDR1669 ...... Time Domain Reflectometer...... 9 High Voltage VLF-34E/VLF-65E ...... 34kV/65kV VLF Hipot...... 16, 45 High Voltage VLF-4022CM ...... 40kV High Load Capacity Portable VLF Hipot...... 15, 44 Hioki PW3196/PW3198 ...... Power Quality Analyzer...... 97 Hipotential Test Sets...... 13, 14, 15, 16, 17, 42, 43, 44, 45, 46 HT Instruments I-V400w ...... Curve Tracer...... 84 HV Diagnostics BA-75 ...... Portable Breakdown Analyzer for Oil Testing...... 108 HV Diagnostics EZ-Cable ID ...... Single/Three-Phase Cable and Phasing Identification System...... 9 HV Diagnostics High Voltage Sources for Off-Line PD Analysis...... 20, 87 HV Diagnostics HVA28TD ...... VLF/DC High Voltage Test Set...... 17, 46 HV Diagnostics HVA30 ...... VLF/DC High Voltage Test Set...... 17, 46 HV Diagnostics HVA34TD ...... VLF/DC High Voltage Test Set...... 17, 20, 46, 87 HV Diagnostics HVA34...... VLF/DC High Voltage Test Set...... 17, 46 HV Diagnostics HVA45TD ...... VLF/DC High Voltage Test Set...... 17, 46 HV Diagnostics HVA60 ...... VLF/DC High Voltage Test Set...... 17, 20, 46, 87 HV Diagnostics HVA90 ...... VLF/DC High Voltage Test Set...... 17, 20, 46, 87 HV Diagnostics HVA120 ...... VLF/DC High Voltage Test Set...... 17, 20, 46, 87 HV Diagnostics HVA High Voltage Test Sets...... 46 HV Diagnostics HVA VLF/DC High Voltage Test Sets...... 17 HV Diagnostics PDTD60 ...... Partial Discharge and Tan Delta System...... 20, 87 HV Diagnostics PDTD60/PDTD120 ...... 60kV and 120kV Partial Discharge and Tan Delta System...... 16, 45 HV Diagnostics PDTD120 ...... Partial Discharge and Tan Delta System...... 20, 87 HV Diagnostics Tan Delta Measurement Systems...... 21 HV Diagnostics TD30 ...... Tan Delta Bridge...... 21 HV Diagnostics TD60-MC ...... Tan Delta Test System...... 21 HV Diagnostics TD60 ...... Tan Delta Bridge...... 21 HV Diagnostics TD90-MC ...... Tan Delta Measurement System...... 21

I Infrared Survey...... 76, 77 Insulation Resistance Test Sets...... 63 Iris Power ELCID ...... Electromagnetic Core Imperfection Detection Test Set...... 78 Iris Power SWA ...... Stator Wedge Analyzer...... 78 IUP Fault Wizard ...... Cable Fault Locator...... 10

126 (866) 352-5550 | protecequip.com INDEX

L Larkin Power M3K ...... Semiconductor Tester...... 79 Low/Medium Voltage Circuit Breakers & Switchgear...... 53

M MadTest DSM4i1 ...... Secondary Current Injection Test Set...... 66 Manta MTS-5100 ...... Protective Relay Test System...... 102 Megger 210415 ...... Insulation Resistance Test Sets...... 63 Megger 230425 ...... 4kV AC and 5kV DC Hipot...... 59 Megger 560400 ...... Phase Rotation Tester...... 79 Megger BGFT ...... Battery Ground Fault Tracer...... 1 Megger BGL ...... Battery Ground Fault Locator...... 1 Megger BITE2P ...... Battery Impedance Test Set...... 3 Megger BITE3 ...... Battery Impedance Test Set...... 3 Megger BM15R ...... Insulation Resistance Test Sets...... 63 Megger BVM-300/600 ...... Battery Voltage Monitor...... 4, 5 Megger CB100 ...... Power Factor Test Set...... 48, 110 Megger CB-832 ...... 1,800A High Current Test Set...... 60, 64 Megger CB-845 ...... 4,500A High Current Test Set...... 60, 64 Megger CFL535G ...... Advanced Dual Channel TDR...... 10 Megger DDA-1600 ...... 16,000A Circuit Breaker Test Set...... 60, 64 Megger DDA-6000 ...... 60,000A Universal Circuit Breaker Test Set...... 61, 64 Megger DELTA4310 ...... Power Factor Test Set...... 48, 110 Megger DET2/2 ...... Digital Ground Resistance Tester...... 30 Megger DET3TC/ICLAMP ...... 3 Terminal Ground Resistance Tester...... 31 Megger DET4TCR2 4...... Terminal Ground Resistance Tester...... 31 Megger DET24C ...... Ground Resistance Clamp Tester...... 31 Megger DET62D ...... Digital Earth Tester...... 32 Megger DLRO10HD ...... 10A Digital Low Resistance Ohmmeter (DLRO)...... 38, 53, 54 Megger DLRO200-115 ...... 200A Digital Low Resistance Ohmmeter (DLRO)...... 39, 54 Megger DLRO600 ...... 600A Digital Low Resistance Ohmmeter (DLRO)...... 39, 54 Megger FRAX101 ...... Sweep Frequency Response Analyzer...... 113 Megger ICLAMP ...... AC Current Probe...... 31 Megger IDAX300 I...... nsulation Diagnostic Analyzer...... 112 Megger L1050 ...... Portable Cable Fault Locator...... 10 Megger MIT485 ...... Insulation Resistance Test Sets...... 63 Megger MIT520 ...... Insulation Resistance Test Sets...... 63 Megger MIT525 ...... Insulation Resistance Meter...... 48, 63, 110 Megger MIT1025 ...... Insulation Resistance Test Sets...... 63 Megger MIT1525...... Insulation Resistance Test Sets...... 63 Megger MOM2 ...... 200A Digital Low Resistance Ohmmeter (DLRO)...... 39, 55 Megger MRCT ...... Relay and Current Transformer Tester...... 105 Megger MS-2A ...... 500A Circuit Breaker and Overcurrent Relay Test Set...... 61, 64 Megger MWA330A ...... Three-Phase Transformer Turns Ratio and Winding Resistance Analyzer...... 114, 119 Megger ODEN AT ...... 21,900A Primary Current Injection Test System...... 61, 64 Megger OTS-60PB ...... 60kV Oil Dielectric Test Set...... 108 Megger PFL22M1500 ...... Portable Cable Fault Location System...... 11 Megger PFL40A ...... Portable Cable Fault Location System...... 11 Megger S1554 ...... Insulation Resistance Test Sets...... 63 Megger SG32-1500M ...... Portable Fault Location System...... 11 Megger SMRT36 ...... Relay Test System...... 102 Megger SMRT46 ...... Multi-Phase Relay Test System...... 103 Megger SMRT410 ...... Relay Test System...... 103 Megger SPI225 ...... Smart Primary Injection Test System...... 64 Megger TORKEL 860 ...... Battery Load Unit...... 4, 5 Megger TORKEL 950 ...... Battery Load Unit...... 4 Megger TTR310 ...... Three-Phase Transformer Turns Ratio Test Set...... 115 Merlin Gerin 55391 or ME ...... Secondary Current Injection Test Set...... 66 Meters & Instrumentation...... 71 Metrel 3103 ...... Insulation Resistance Test Sets...... 63 Metrel 3200 ...... Insulation Resistance Test Sets...... 63 Mikron 7200V ...... Infrared Camera...... 77 Motor & Semiconductor Analyzers...... 78, 79, 80 Multifunction Multimeters...... 81

(866) 352-5550 | protecequip.com 127 INDEX

O Ofil Systems DayCor Superb-OD ...... Corona Camera...... 18, 88 Oil Test Equipment...... 108 Olympus IPLEX RT ...... Videoscope...... 71 Omicron ARCO 400 ...... Universal Test Set for Recloser Controls...... 50 Omicron CB TN3 ...... Transducer Node for CIBANO 500...... 36, 51 Omicron CIBANO 500 ...... 3-in-1 Circuit Breaker Test System...... 36 Omicron CMC 356 ...... Universal Relay Test Set and Commissioning Tool...... 103 Omicron CP B2 ...... Accessory to CPC 100 for Current Requirements Up to 2000A...... 49, 111 Omicron CPC 100 ...... Multifunctional Primary Test System...... 33, 49, 111 Omicron CP CU1 ...... Multifunctional Coupling Unit for CPC 100...... 32 Omicron CP SB1 ...... Switch Box for Automated Transformer Testing...... 111 Omicron CP TD1 ...... Capacitance/Dissipation Factor Testing Device...... 49, 111 Omicron CP TD12 ...... Capacitance and Power/Dissipation Factor...... 33, 49, 106, 111, 115 Omicron CT Analyzer ...... Current Transformer Testing, Calibration and Assessment...... 106 Omicron FRANEO 800 ...... Sweep Frequency Response Analyzer...... 112 Omicron RCP1 ...... (19 Pin) Recloser Control Cable...... 103 Omicron Recloser Control Cable Packages...... 103 Omicron RST1 ...... (14 Pin) Recloser Control Cable...... 103 Omicron RVT1 ...... (32 Pin) Recloser Control Cable...... 103 Omicron TESTRANO 600 ...... Three-Phase Power Transformer Test System...... 33, 106, 115

P Partial Discharge...... 87 Partial Discharge (Off-Line) Test Sets...... 20, 87 Partial Discharge (On-Line) Test Sets...... 18, 19, 20, 88, 89 PdMA MCEMAX ...... Motor Circuit Evaluation Analyzer...... 80 PdMA MCE ...... Motor Circuit Evaluator...... 79 Phenix 6CP100/50-10 ...... 50kV & 100kV AC Dielectric Test Set...... 16, 45 Photovoltaic Monitoring...... 84 PMDT PDetector ...... Handheld Partial Discharge Detector...... 19, 89 PowerComm PCA-4125 ...... Power Communications Analyzer...... 99 Power Factor Test Sets...... 47, 48, 49, 109, 110, 111 Power Quality...... 91 Power Quality Analyzers...... 92, 93, 94, 95, 96, 97 Power Supplies...... 82, 83 Primary Current Injection Test Sets...... 64

R Radian Research RB-10 ...... Bantam Lite Portable Test Kit...... 85 Raytech CT-T1 ...... Current Transformer Tester...... 106 Raytech Micro Centurion II MC-2 ...... 200A Micro Ohm Meter...... 40, 55 Raytech Micro Junior 2 ...... 10A Micro Ohm Meter...... 40, 55 Raytech TR-1/TR-1P ...... Single-Phase Transformer Turns Ratio Meter...... 116 Raytech T-Rex ...... Three-Phase Voltage Extension to Turns Ratio Meter...... 115 Raytech TR-Mark III ...... Three-Phase Transformer Turns Ratio Meter...... 116 Raytech WR14 ...... Winding Resistance Meter with Demagnetization and Discharge...... 119 Raytech WR50-12 ...... Winding Resistance Meter with Demagnetization and Discharge...... 120 Recloser Control Test Sets...... 50 Relay & Protection...... 99 RH Systems 973-...... SF6 Gas Analyzer...... 28 RKI GX-2009 ...... Gas Detector...... 24

S Satin American ETC-PTS ...... Secondary Current Injection Test Set...... 66 Scientific Columbus SC10 ...... Watthour Standard Meter...... 85 Seaward PV150 ...... Solar Installation Tester...... 84 Seaward Solar Utility Pro ...... Complete Solar Kit...... 84 Secondary Current Injection Test Sets...... 65, 66, 67 Siemens ELTPHB ...... Secondary Current Injection Test Set...... 66 Siemens PTS-3 ...... Secondary Current Injection Test Set...... 66 Siemens PTS-4 ...... Secondary Current Injection Test Set...... 66

128 (866) 352-5550 | protecequip.com INDEX

Siemens PTS-5 ...... Secondary Current Injection Test Set...... 66 Siemens SBAPM ...... Secondary Current Injection Test Set...... 66 Siemens TD500 ...... Secondary Injection Test Set...... 66 Siemens TS-31 ...... Secondary Current Injection Test Set...... 66 Siemens Westrip Adapter...... Secondary Current Injection Test Set...... 67 Siemens WLTS ...... Secondary Current Injection Test Set...... 67 Simran SIM-3000 ...... Step Up/Down Voltage Transformer...... 82 Single-Phase Test Sets...... 100 SKF Baker AWA-IV/12 ...... Static Motor Analyzer...... 80 SKF Baker PP30 ...... Power Pack...... 80 SMC Raptor C-05 ...... 3,800A Multifunctional Primary Testing System...... 62, 64 Solar Monitoring...... 84 Sonel UV-260 ...... Corona Camera...... 20, 89 Square D CBTM1 ...... Secondary Current Injection Test Set...... 67 Square D CBTM3 ...... Secondary Current Injection Test Set...... 67 Square D CBTM4A ...... Secondary Current Injection Test Set...... 67 Square D CBTMB ...... Secondary Current Injection Test Set...... 67 Square D S33595 ...... Secondary Current Injection Test Set...... 67 Square D UTA Tester ...... Secondary Current Injection Test Set...... 67 Square D UTS-3 ...... Secondary Current Injection Test Set...... 67 Staco 1520-3/C-3 ...... Variable Transformer...... 83 Storage Battery Systems SBS-2003 ...... Battery Hydrometer/Density Meter...... 2 Storage Battery Systems SBS-3500 ...... Battery Hydrometer/Density Meter...... 2 Storage Battery Systems SBS-8400 ...... Battery Capacity Tester...... 4 Summit Technology PowerSight PS3550 ...... Power Analyzer...... 96 Sweep Frequency Response Analyzers...... 112, 113

T Tan Delta Test Sets...... 21 Three-Phase Test Sets...... 101, 102, 103 Time Electronics 1051 ...... Resistance Decade Box...... 73 Transducer Test Sets...... 51 Transformer Test & Diagnostics...... 105 Turns Ratio Test Sets...... 114, 115, 116, 117, 118

U Utility Relay Company B-290 ...... Secondary Current Injection Test Set...... 67 Utility Relay Company B-291MP ...... Secondary Current Injection Test Set...... 67 Utility Relay Company B-292...... Secondary Current Injection Test Set...... 67

V Vacuum Bottle Test Sets...... 68, 69 Vacuum Interrupters CBT-1202 ...... Circuit Breaker Timer...... 68 Vacuum Interrupters MAC TS4 ...... Vacuum Interrupter Tester...... 68 Vacuum Interrupters PowerVac V1 ...... Rigid Magnetic Coil for GE PowerVac Circuit Breakers...... 68 Vaisala DM70 ...... Dew Point Analyzer...... 74 Vanguard ATRT-01/01B ...... Single-Phase Transformer Turns Ratio Meter...... 116 Vanguard ATRT-03A S2 ...... Three-Phase Transformer Turns Ratio Meter...... 117 Vanguard Auto-Ohm 100 ...... 100A Micro-Ohmmeter...... 40, 56 Vanguard Auto-Ohm 200 S3 ...... 200A Micro-Ohmmeter...... 41, 56 Vanguard CT-6500 ...... Circuit Breaker Timer Analyzer...... 36 Vanguard CT-7000 S3/S6 ...... Circuit Breaker Timer and Travel Analyzer...... 37 Vanguard CT-8000 S3 ...... Circuit Breaker Timer Analyzer...... 37 Vanguard DigiTMR ...... Circuit Breaker Timer and Analyzer...... 69 Vanguard EZCT-2000A ...... Automated CT Test Set...... 107 Vanguard EZCT-2000C Plus ...... Automated CT Test Set...... 107 Vanguard EZCT/EZCT-10 ...... CT Test Set...... 107 Vanguard LTCA-40 ...... Load Tap Changer Analyzer...... 120 Vanguard MCCB-250 ...... 500A Circuit Breaker Test Set...... 62, 64 Vanguard RT-1 ...... Transducer Test Set...... 51 Vanguard RT-2 ...... Transducer Test Set...... 51 Vanguard TR1 Ext ...... Transducer Test Set...... 51 Vanguard TR-1 ...... Transducer Test Set...... 51

(866) 352-5550 | protecequip.com 129 INDEX

Vanguard TR-2 ...... Transducer Test Set...... 51 Vanguard TRF-100 ...... Three-Phase Transformer Turns Ratio Meter...... 117 Vanguard TRF-250A ...... Three-Phase Transformer Turns Ratio Meter...... 117 Vanguard TR-HMB ...... Transducer Test Set...... 51 Vanguard TRI-PHASE ...... True Three-Phase Transformer Turns Ratio Meter...... 118 Vanguard TRM-403 ...... Transformer Resistance Meter...... 120 Vanguard UPS-S2 ...... Universal Power Supply...... 83 Vanguard VBT-60 ...... 60kV Vacuum Bottle Tester...... 69 Vanguard WRM-10 ...... Winding Resistance Test Set...... 121 VON XF28-1960 ...... Portable Arc Reflection Combination TDR Thumper...... 12

W Watthour Meters...... 85 Westinghouse 12552C48G02 ...... Secondary Current Injection Test Set...... 67 Westinghouse SPBPTK (1272C61G02) ...... Secondary Current Injection Test Set...... 67 Wika GA10 ...... SF6 Gas Analyzer...... 28 Winding Resistance Test Sets...... 119, 120, 121

130 (866) 352-5550 | protecequip.com Keep your motors healthy… … In the palm of your hand

Megger Baker MTR105

Testing your electric motors is essential in determining their condition. Performing a suite of test types helps to build up a clearer picture in maintaining and preventing failure.

The Megger Baker MTR105 is a dedicated static motor Some of the key features include: tester. Its multifunction capabilities include: n Guard terminal n Insulation tester n Full graphic color display n Digital low resistance ohmmeter (DLRO) n Three-phase connection n Voltmeter n IP54 environmental protection n Motor rotation tester n Operating altitude up to 3000 m n LCR meter n Temperature compensation for IR n Temperature measurement

So get a clean bill of health for your motors by using the Megger MTR105. Protec Equipment Resources The Electrical Test & Measurement Equipment Rental Experts

protecequip.com (866) 352-5550

Dallas Houston 1517 W Carrier Pkwy, Ste 116 14251 Gulfstream Park Dr Grand Prairie, Texas 75050 Webster, Texas 77598 (972) 352-5550 (832) 251-7047

Los Angeles Chicago 2935 E Ricker Way 1501 Wright Blvd Anaheim, California 92806 Schaumburg, Illinois 60193 (657) 758-5098 (847) 434-5808

Reno-Tahoe Atlanta 924 Greg St 880 Veterans Memorial Hwy, SE Sparks, Nevada 89431 Mableton, Georgia 30126

(775) 984-5223 (678) 210-1423 2021

Denver New York 12050 E 45th Ave, Unit 400 70 Triangle Blvd Denver, Colorado 80239 Carlstadt, New Jersey 07072 (720) 826-6378 (201) 450-9743