DOCSLIB.ORG

Construction Building/ Woodworking Tools

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Construction Building/ Woodworking Tools section six construction building/ woodworking tools . 221-250 levels/ measuring . 251-260 decorating tools . 261-269 electricians/ plumbing tools . 270-287 personal protection equipment (PPE) . 288-294 safety . 294-298 section 6 building/woodworking tools 2 BT/SG 1 BT11/SG 140mm Bucket Trowel 3 PT/SG 280mm Soft Grip Philadelphia Expert Quality, designed for removing wet mortar from Brick Trowel a bucket. Deep swan neck handle and flat end blade. 150mm Soft Grip Pointing Trowel Expert Quality, carbon steel blade hardened and Carbon steel blade hardened and tempered with Expert Quality, carbon steel blade hardened and tempered with lacquered finish. Blade firmly fixed to lacquered finish. Blade firmly fixed to tang by heavy tempered with lacquered finish. Blade firmly fixed to tang by eight welded rivets. Special soft grip handle for duty weld. Special soft grip handle for user comfort. tang by heavy duty weld. Special soft grip handle for user comfort. Display packed. Display packed. user comfort. Display packed. Stock Euro GBP £ Stock Euro GBP £ Stock Euro GBP £ No. each each No. each each No. each each 87896 €14.46 £9.64 87901 €6.96 £4.64 87897 €8.82 £5.88 6 BTK6 5 TS3/SG 4 GT/SG 6 piece Bricklayers Trowel Kit 3 piece Soft Grip Brick Trowel Set 175mm Soft Grip Gauging Trowel Comprising tools for most bricklaying and mortar Expert Quality, high carbon steel blades hardened and repairs. Display packed. Expert Quality, carbon steel blade hardened and tempered with lacquered finish. Special soft grip handle tempered with lacquered finish. Blade firmly fixed to • Contents: 280mm soft grip brick trowel, 150mm soft grip for user comfort. Display packed. pointing trowel, 175mm soft grip gauging trowel, 280mm tang by heavy duty weld. Special soft grip handle for Contents: 280mm soft grip brick trowel, 150mm pointing soft grip plasterers trowel, brick jointer trowel, pair of line user comfort. Display packed. trowel and 280mm soft grip plastering trowel pins and 18M (approx.) polyethylene brick line. Stock Euro GBP £ Stock Euro GBP £ Stock Euro GBP £ No. each each No. per set per set No. per kit per kit 87898 €10.53 £7.02 88593 €33.06 £22.04 75243 €42.12 £28.08 7 5311 9 115 8 280mm Philadelphia Pattern Brick Trowel EG93 175mm Gauging Trowel Carbon steel blade hardened and tempered with 150mm Pointing Trowel Designed for finishing work in confined areas. lacquered finish. Polished hardwood handle. Display With hardened, tempered and lacquered carbon steel Hardened, tempered and lacquered carbon steel blade. packed. blade. Hardwood handle. Display packed. Polished hardwood handle. Display packed. Stock Euro GBP £ Stock Euro GBP £ Stock Euro GBP £ No. each each No. each each No. each each 55519 €13.47 £8.98 13664 €7.59 £5.06 66553 €9.24 £6.16 Prices are list, each and exclude VAT. 221 construction building/woodworking tools 1 197C 2 piece Corner Trowel Set For accurate neat finishing when plastering internal 6 and external corners. Hardened and tempered carbon 5 FT/SG steel blades with hardwood handles. Display packed. Soft Grip Plastering Trowels 400mm Flooring Trowel Expert Quality, carbon steel blades , 120mm wide, Stock Euro GBP £ Expert Quality, carbon steel blade , 110mm wide, hardened and tempered with lacquered finish. Blades No. Height Width per set per set hardened and tempered with lacquered finish. Blade firmly fixed to tang by eight welded rivets. Special soft 90037 125mm 56mm €7.23 £4.82 firmly fixed to tang by eight welded rivets. Special soft grip handle for user comfort. Display packed. grip handle for user comfort. Display packed. Stock Part Euro GBP £ Stock Euro GBP £ No. No. Length each each No. each each 87899 PT11/SG 280mm €16.14 £10.76 88180 €17.82 £11.88 87900 PT18/SG 455mm €20.34 £13.56 2 1121 Brick Jointer Trowel Designed to finish the mortar joints between bricks. Suitable for 13mm and 16mm joints. Manufactured from carbon steel hardened and tempered with a plated finish. Display packed. Stock Euro GBP £ No. each each 20853 €4.68 £3.12 7 Plastering Trowels 8 197 Expert Quality, hardened, tempered and lacquered carbon steel blade. Handle mounting is securely fixed to Plastering Trowel the blade with eight concealed welded rivets. Hardened, tempered and lacquered carbon steel blade. Traditional banana-shaped rubber wood handle with Handle mounting is securely fixed to the blade with sanded smooth finish. Display packed. eight concealed welded rivets. Traditional banana shaped wood handle. Display packed. Stock Part Euro GBP £ No. No. Length Width each each Stock Euro GBP £ 39051 200 355mm 120mm €16.08 £10.72 No. Length Width each each 50001 201 455mm 120mm €16.86 £11.24 52445 280mm 120mm €16.50 £11.00 3 MJR1 Mortar Joint Raker For cleaning old or damaged mortar joints prior to repointing. Cast aluminium handle with integral mortar 9 joint blade to assist with cleaning up brick edges. Variable depth 60mm replaceable nail. 46mm diameter metal wheels. Display packed. Stock Euro GBP £ No. each each 89722 €8.31 £5.54 10 10 4 BLT Plasterer's Featheredges Brick and Block Lifting Tongs 9 AD Tapered edge for smoothing and straightening Expert Quality, for lifting bricks or blocks in one go. plasterwork. Flat edge for tamping and smoothing The tongs automatically close when handle is lifted. 1200mm Plasterer's Derby concrete. Lightweight aluminium. Sold loose. Adjustable length arms from 400mm to 670mm. Steel For final surface finishing. Extruded aluminium with Minimum order 2 featheredges of the same size or construction with soft grip handles for user comfort. two handles. Sold loose. multiples thereof Sold loose. Minimum order 2 derbys or multiples thereof Stock Part Dimensions Euro GBP £ Stock Euro GBP £ Stock Euro GBP £ No. No. L x W each each No. each each No. each each 89713 FE1200 1200 x 100mm €18.03 £12.02 90002 €20.34 £13.56 89711 €16.26 £10.84 89712 FE1800 1800 x 100mm €26.61 £17.74 222 Prices are list, each and exclude VAT. section 6 building/woodworking tools 1 STC 2 STE 240mm Plasterer's Leaf and Square Tool 250mm Plasterer's Trowel and Square Tool Solid forged steel ground and hardened. Display Solid forged steel ground and hardened. Display packed. packed. Stock Euro GBP £ Stock Euro GBP £ No. each each No. each each 90079 €6.60 £4.40 90083 €6.60 £4.40 4 AST11/SG 280mm Soft Grip Adhesive 3 T104A Spreading Trowel 5 T105A Expert Quality, serrated carbon steel blade, 120mm General Purpose Trowel wide, hardened and tempered with lacquered finish. Adhesive Spreading Trowel Polished and lacquered carbon steel blade, fusion Blade firmly fixed to tang by eight welded rivets. Polished and lacquered carbon steel blade, serrated on welded with five rivets to the moulded polypropylene Special soft grip handle for user comfort. Display two edges and fusion welded with five rivets to the handle. Display packed. packed. moulded polypropylene handle. Display packed. Stock Euro GBP £ Stock Euro GBP £ Stock Euro GBP £ No. Length Width each each No. each each No. Length Width each each 67143 265mm 115mm €8.70 £5.80 87902 €16.14 £10.76 67144 265mm 115mm €9.15 £6.10 SMOOTH FACE 6 T106 7 T107 FOR PLASTERING 8 Polyurethane Floats Plastering Float T109 Lightweight general purpose float manufactured from Manufactured from high impact polystyrene making it Sponge Face Float rigid polyurethane foam. Sold loose. suitable for heavy duty work. Will outlast conventional Rigid polyurethane with 20mm deep foam work polyurethane models. Sold loose. surface. Sold loose. Stock Euro GBP £ No. Length Width each each Stock Euro GBP £ Stock Euro GBP £ 13411 280mm 140mm €7.41 £4.94 No. Length Width each each No. Length Width each each 13412 320mm 180mm €9.24 £6.16 22333 280mm 110mm €10.02 £6.68 57545 240mm 120mm €12.72 £8.48 9 9020SG 10 9026 11 9022 Soft Grip Aluminium Plasterers Hawk Polyurethane Plasterers Hawk Polyurethane Plasterers Hawk Expert Quality, manufactured from sheet aluminium, Tough polyurethane and handle with callous protector. Lightweight hawk manufactured from rigid with detachable soft grip handle. Display packed. Display packed. polyurethane foam with plastic handle. Sold loose. Stock Euro GBP £ Stock Euro GBP £ Stock Euro GBP £ No. Length Width each each No. Length Width each each No. Length Width each each 88594 300mm 300mm €20.88 £13.92 40938 330mm 330mm €10.95 £7.30 13458 248mm 248mm €16.05 £10.70 Prices are list, each and exclude VAT. 223 construction building/woodworking tools 3 CL30 Chalk Line 2 5189 1 5188A Diecast metal body with angle markings. Fold away 130g Steel Plumb Bob winding handle, filling hole and self chalking line 100g Solid Brass Plumb Bob Accurately machined steel plumb bob with corrosion (average length 30M) with metal end support. Supplied Expert Quality, precision machined solid brass plumb resistant plating and brass screw cap. Weight 130g. complete with sachet of chalk. Display packed. bobs with 5M (approx.) of nylon line. Display packed. (approx.). Display packed. Stock Part Euro GBP £ Stock Euro GBP £ Stock Euro GBP £ No. No. Description each each No. each each No. each each 11528 CL30 Chalk Line €12.84 £8.56 60698 €7.53 £5.02 52172 €4.80 £3.20 13703 SP/CL30 Sachet of Chalk €1.77 £1.18 4 Chalk for Chalk Lines Plastic bottles of fine chalk for use with Draper and other manufacturers chalk lines. Supplied with funnel for filling. Three colours available. Display packed. Stock Part Euro GBP £ No. No. Colour each each 69582 LCB Blue €2.10 £1.40 69583 LCR Red €2.10 £1.40 69584 LCY Yellow €2.10 £1.40 6 CL18 5 CLN18 18M Cotton Chalk Line 7 18M Nylon Chalk Line For use with chalk powder.
Load more

Recommended publications
  • Pta and Hand Tools
    Precision, Quality, Innovation PTA AND HAND TOOLS Hole Saws Hacksaws Jig Saws Reciprocating Saws Portable Band Saws Measuring Tapes Utility Knives Levels Plumb Bobs Chalk Rules & Squares Calipers Protractors Punches Shop Tools Lubricant Catalog 71 PRECISION, QUALITY, iNNOVATiON For more than 135 years, manufacturers, builders and craftsmen worldwide have depended upon precision tools and saws from The L.S. Starrett Company to ensure the consistent quality of their work. They know that the Starrett name on a saw blade, hand tool or measuring tool ensures exceptional quality, innovative products and expert technical assistance. With strict quality control, state-of-the-art equipment and an ongoing commitment to producing superior tools, the thousands of products in today's Starrett line continue to be the most accurate, robust and durable tools available. This catalog features those tools most widely used on a jobsite or in a workshop environment. 2 hole saws Our new line includes the Fast Cut and Deep Cut bi-metal saws, and application-specific hole saws engineered specifically for certain materials, power tools and jobs. A full line of accessories, including Quick-Hitch™ arbors, pilot drills and protective cowls, enables you to optimise each job with safe, cost efficient solutions. 09 hacksaws Hacksaw Safe-Flex® and Grey-Flex® blades and frames, Redstripe® power hack blades, compass and PVC saws to assist you with all of your hand sawing needs. 31 jig saws Our Unified Shank® jig saws are developed for wood, metal and multi-purpose cutting. The Starrett bi-metal unique® saw technology provides our saws with 170% greater resistance to breakage, cut faster and last longer than other saws.
    [Show full text]
  • Cotswold Way Discovery This Series of Activity Sheets Supports the Cotswold Way Discovery Resource
    Cotswold Way Discovery This series of activity sheets supports the Cotswold Way Discovery resource. The Going Wild activity sheets for families will help transform every trip to the Cotswold Way into a fun-filled adventure. They have been devised by Jo Schofield and Fiona Danks of Going Wild (www.goingwild.net) - authors of Nature’s Play- ground, Go Wild, Make it Wild and Run Wild, published by Frances Lincoln. There are 10 simple activities that require minimal preparation and equipment. MAKING BIRDS NESTS Please note that anyone taking part in this activity does so STICK AND CLAY CHARACTERS at his or her own risk. MOBILES AND WIND CHIMES The Cotswold Way and the authors do not accept any legal responsibility for any harm, injury, damage, loss or pros- HOBBY ANIMALS ecution resulting from doing this activity. FAIRY AND WIZARD WANDS CROWNS AND MASKS Leave wild places as you find them. IMAGINATIVE SCAVENGER HUNTS Please respect the Countryside Code. CAMOUFLAGE GAMES WIND FLAGS BOWS AND ARROWS Copyright Jo Schofield and Fiona Danks 2010 www.goingwild.net MAKING BIRD NESTS 1 What to take with you • Perhaps a few chocolate eggs Nests provide shelter and warmth and, most importantly, a safe place for adult birds to lay What to collect and incubate eggs and rear their young. Some • Bendy twigs for weaving species build incredibly intricate, finely woven • Grass, moss, feathers etc nests, delicate and light yet strong enough to to line the nests hold and protect the eggs and nestlings. Nests made by human fingers can’t compete How to make the nests with the complex structures created by birds, Show the children a photograph of a nest, or but it’s fun to have a go, using whatever better still have a look for a real bird’s nest, tak- materials can be found.
    [Show full text]
  • Woodwork Hand-Tools
    Woodwork hand-tools JSS 1 (2nd Term – Week 2) Woodwork hand-tools BORING TOOLS – In machining, boring is the process of enlarging a hole that has already been drilled (or cast), by means of a single-point cutting tool (or of a boring head containing several such tools). Boring is used to achieve greater accuracy of the diameter of a hole, and can be used to cut a tapered hole. Boring can be viewed as the internal-diameter counterpart to turning, which cuts external diameters. Boring tools are used to make holes in wooden materials. The wooden material is held firm with braces before the boring is done. Some examples of boring tools are wood brace, ratchet brace, bradawl, etc; some of the boring tools are discussed below. (I.) The Ratchet Brace: The Ratchet brace has four (4) parts which are: • The Head: The head is made of hardwood and shaped to fit the hand of the user. It is screwed to a steel sleeve. It fits over the crank rod and runs on the hardened steel balls. • The Crank: This is a rectangular bent metal rod. It fits into the hardwood or plastic handle. • The Chuck: The end of the crank is enlarged, threaded and slotted to receive the socket and jaws respectively. • The Ratchet: A ratchet is a tool fitted to the ratchet brace so that holes can be drilled (bored) at specific parts that are not really exposed, such as corners where it is impossible to make complete turn. CUTTING TOOLS – In the context of machining, a cutting tool or cutter is any tool that is used to remove material from the workpiece by means of shear deformation.
    [Show full text]
  • Metalwork & Woodwork Saws
    HAMMERS - ANVILS - METALWORK & WOODWORK SAWS C HAMMERS BENCH PIN & ANVIL 77 CABLE TACKER GUN 76 DAVID USE PHOTO COPING SAWS 79 SD0010 FRETSAW BLADES 79 FRETSAW FRAMES 79 O HAMMER S & MALLETS 72 - 74 HACKSAWS 76 - 77 MINITURE ANVILS 74 MINITURE PINS 75 MALLET MITRE BOXES 82 PIERCING SAW BLADES 78 PIERCING SAW FRAMES 78 N DAVID USE PHOTO PIN PUSHERS 75 SD0010 RAZOR SAWS 81 SAW BLADE LUBRICANT 78 SAW KNIFE BLADES 81 STAPLE GUNS 75 - 76 V-BLOCK & CLAMPS 77 WEB STRETCHER 82 T ANVILS WOOD SAWS 80 - 81 X-ACTO RAZOR SAWS 81 DAVID USE PHOTO ZONA RAZOR SAWS 79 SD0010 E SAWS N DAVID USE PHOTO SD0010 T V BLOCK & CLAMP DAVID USE PHOTO SD0010 S Last Revised 04/07/2011 71 SQUIRES MODEL & CRAFT TOOLS HAMMERS & MALLETS MAGNETIC TACK HAMMER 6oz a specially designed hammer having one striking face magnetised for use when fitting small nails JEWELLERS MALLET a lightweight stainless steel mallet similar and upholstery tacks. The head features a claw for removing to those used by watchmakers and jewellers, with a solid head and tacks, the striking surface is a magnetic split pattern. The head is knurled shaft. hardened and pol- Length 145mm. ished. Fitted on a Weight 2½oz. hickory handle. Weight 6oz, length overall CODE TYPE PRICE 265mm. HA0025 Jewellers Mallet.................................................... £3.99 WATCHMAKERS MALLET a lightweight jewellers and watch- CODE TYPE PRICE makers mallet with a solid brass head. The handle is 260mm long 051-006 Magnetic Tack Hammer 6oz................................. £14.99 and has an increased diameter and is knurled for extra grip.
    [Show full text]
  • STANLEY® FATMAX® Tri-Material Hand Saws with Bladearmor® Coating
    STANLEY® FATMAX® TRI-MaterIAL HAND SAWS WITH BLADEARMOR® COatING ■ Tri-material handle for comfort and durability. SAW ■ New handle design improves ease of cut by 25%*. ■ Triple Ground Tooth Technology 4X** sharper for fast cuts. S ■ Induction hardened teeth for long life. ■ BladeArmor® coating helps reduce friction while cutting. Product # Blade Length (in) Points Per Inch Teeth Per Inch 20-046 15 12 11 20-047 20 12 11 FMHT20218 26 12 11 *Compared to previous model. **Compared to traditional tooth saws. STANLEY® FATMAX® BOX SAW ■ Blade is 15% thicker than conventional saws for straighter cuts with less binding. ■ SharpTooth™ Saw Technology uses three cutting surfaces to cut 50% faster than conventional STANLEY® hand saws. ■ Induction-hardened teeth stay sharp up to 5X longer than standard teeth. ■ Thick, ergonomically designed grip resists slipping and adds comfort. ■ Back of saw can be used to mark 45° and 90° angles. Product # Blade Length (in) Points Per Inch Teeth Per Inch 20-045 15 9 8 STANLEY® SHARPTOOTH® CUSHION GRIP SAWS ■ SharpTooth™ saw technology uses three cutting surfaces to cut 50% faster than conventional STANLEY® hand saws. ■ Induction-hardened teeth stay sharp up to 5X longer than standard teeth. ■ Ergonomically designed one-piece handle. Product # Blade Length (in) Points Per Inch Teeth Per Inch 20-526 15 12 11 20-527 20 12 11 STANLEY® Heavy-DUTY SHARPTOOTH® WOOD HANDLE SAWS ■ Aggressive multipurpose saw for fast cutting. ■ SharpTooth™ Saw Technology uses three cutting surfaces to cut 50% faster than conventional STANLEY® hand saws. ■ Induction-hardened teeth stay sharp up to 5X longer than standard teeth.
    [Show full text]
  • ADB Staked Armchair
    STAKED ARMCHAIR Chapter 2 Armbows are diff icult creatures. here’s something about building an armchair that tips the mental scales for many woodworkers. Making a stool is easy – it’s a board withT legs. OK, now take your stool and add a backrest to it. Congrats – you’ve made a backstool or perhaps a side chair. But once you add arms to that backstool you have committed a serious act of geometry. You’ve made an armchair, and that is hard-core angle business. Yes, armchairs are a little more complicated to build than stools or side chairs. But the geometry for the arms works the same way as it does for the legs or the spindles for the backrest. There are sightlines and re- sultant angles (if you need them). In fact, I would argue that adding arms to a chair simplifies the geometry because you have two points – the arm and the seat – to use to gauge the angle of your drill bit. When you drill legs, for example, you are alone in space. OK, I’m getting ahead of myself here. The key point is that arms are no big deal. So let’s talk about arms and how they should touch your back and your (surprise) arms. Staked Armchair all sticks are on 2-3/4" centers 2-3/4" 4-1/2" 3-1/2" 65° 38° 2-1/2" 2-1/2" CHAPTER II 27 Here. This is where I like the back of the armbow to go. Its inside edge lines up with the outside edge of the seat.
    [Show full text]
  • A Woodworker's Wish List
    A Woodworker’s Wish List Brighten the holidays with these great gifts By Joe Hurst-Wajszczuk Having a woodworker on and accessories we wish your gift list is both a blessing we had bought sooner. The and a curse. While there is result is a selection suitable no shortage of new tools for woodworkers of all skill and accessories, the trick is levels. So if you’ve got family selecting items that will get members or friends who are used, rather than sit on a shelf. woodworkers, skip the ties, For inspiration, we collected socks, scarves, and cologne. Give gift-giving advice from fellow some gifts that keep on giving, woodworkers and added our now and for years to come. own insights about the tools Photos: Larry Hamel-Lambert Dec/Jan 2016 woodcraftmagazine.com 43 Marking & Measuring Go to the Buyer’s Guide on p. 66 for prices and ordering informati on for featured items. Super-stable square $40 Compared to a combinati on square, the Veritas Sliding Square’s 3"-wide blade provides a more substanti al reference face for transferring measurements. With the collar removed, the accurately machined blade is also useful as a fl at square. Tighter tolerances $42 The Wixey Dual Display Caliper Make your mark $15 simultaneously displays decimal The name’s a curve ball, but the and fracti onal measurements benefi ts go straight to the heart (to the nearest 64th of an of precise layout. The Pica-Dry inch). Adding a WoodRiver Pen is a mechanical pencil that Depth Gauge ($20) turns works on most surfaces, including any caliper into a super- wet wood, glass, and ti le.
    [Show full text]
  • LED-Reading Lamp Metal
    111.264 LED-Reading lamp Metal Necessary tools: Metal drills ø2,5/3/4/6 mm Thread Tap M3mm 90°-Countersink Fretsaw with blade for metal File assortment Vice with jaw protectors Pencil Ruler Soldering iron Screwdriver Please Note The OPITEC range of projects is not primarily inten- ded as toys for young young children. It is for teaching, designing and making to ensure that puplis experience a range of tools and processes PARTS LIST Stückzahl Size (mm) Description Teile-Nr. Aluminium sheet 1 150x80x1 Housing 1 Aluminium rectangle 1 75x20x10 Housing 2 USB-LED-Lamp 1 Lighting 3 Micro slide switch 1 19x6 Switch 4 Alumnium wire 1 250x1,6 Clip 5 Machine screw 8 10x3 Lamp fixing 6 Machine screw 1 16x3 Lamp fixing 7 Nuts 2 M3 Switch fixing 8 Washers 6 M3 Fixing 9 Clips 1 3-7 Lamp fixing 10 Battery clip 1 Connection 11 Widerstand 220 Ohm 1 Vorwiderstand 12 D111264#1 1 INSTRUCTIONS General: For cutting the aluminium sheet use a fretsaw with a metal cutting blade 1. Cut the Aluminium-sheet (1) to the pattern (Page 3 ) with a fretsaw. Round the edges with a file and drill the holes ø3 + ø4 as shown in the pattern . Make the slot for the switch. To do this drill this make 3mm dia holes and then use a fretsaw File and clean up the edges, use a countersink to clean up any burr on the Top Bottom holes Note: For better drilling results, frstly bend the top and the bottom and then drill the 4mm dia holes togeher 2.
    [Show full text]
  • Pad Foot Slipper Foot
    PAD FOOT SLIPPER FOOT The most familiar foot of the To me, the slipper foot is the three, the pad foot has plenty most successful design for of variations. In the simplest the bottom of a cabriole leg, and most common version the especially when the arrises 3 rim of the foot is ⁄4 in. to 1 in. on the leg are retained and off the floor and its diameter gracefully end at the point is just under the size of the of the foot. There’s a blend leg blank. A competent 18th- of soft curves and defined century turner easily could edges that just works. This have produced it in less than particular foot design was 5 minutes, perhaps explaining taken from a Newport tea its prevalence. This is my table in the Pendleton House interpretation of a typical New collection at the Rhode Island England pad foot. School of Design Museum. 48 FINE WOODWORKING W270BR.indd 48 7/3/18 10:24 AM A step-by-step guide to creating three distinct period feet for the cabriole leg BY STEVE BROWN One Leg, Three Feet n the furniture making program at North Bennet Street School, students usually find inspiration for Itheir projects in books from our extensive library. They’ll find many examples of period pieces, but SLIPPER FOOT TRIFID FOOT they’ll also find more contemporary work. What they won’t find is any lack of possibilities. Sometimes limit- To me, the slipper foot is the The trifid foot is similar to the ing their options is the hard part.
    [Show full text]
  • Ln //-----~-----__M---)~ 02-0&31 Hunting Knife
    ADDISON BUILDING MATERIAL CO. INC., • 3201 S. Busse Rd., Arlington Heights, IL 60005 Order Department (847) 437-1288· Main (847) 437-1205 • FAX (847) 437-4183 91 Ka.-ba~ SKU NO. 700910 02-G603 3-5116" III Standard Barlow knife, clip and pen blades. SKU NO. 701010 02-0644 4" Stock knife; clip, coping and spey blades. SKU NO. 700920 02-0&05 3-3116" Serpentine Jackknife, clip and pen blades. I=--- SKU NO. ~_ ~-~701015 02-1l646 Closed size 3-15/16", open size 7-1/8", dark brown handle. SKU NO. 700t35 02-0&19 3-11N6" Camping knife; spear, can opener, screwdriver/ SKU NO. bottle opener, punch blades with shackle. 701037 02-0647 Closed size 3", open size 5-1/2", dark brown handle. SKU NO. 700950 02-0&29 5" Daddy Barlow, clip blade. SKU NO. c~~701039 02-0648 Closed size 4", ~ ....-...'\!t:!~~ open size 7-1/8", maroon handle. Ln_//-----~-----__m---)~ 02-0&31 Hunting knife. Bowie style, 6'" blade with sheath. Stainless steel blade, genuine hardwood handle. SKU NO. 700985 SKU NO. 70104302·1013 3%W BARLOW - Clip and pen blades. ~ SKU NO. 700195 02-0&35 3-3116" Pearlized Jackknife. Clip and pen blades. SKU NO. 701049 02-1026 3w JACK KNIFE - Clip and pen blades. SKU NO. 701000 02-0&37 2-518" Penknife. Clip and pen blades. RENTAL' BUILDING MATERIALS' HAND TOOLS· POWER TOOLS· HARDWARE· FASTENERS· PAINT· ELECTRICAL' PLUMBING· LAWN & GARDEN· JANITORIAL ADDISON BUILDING MATERIAL CO. INC., • 3201 S. Busse Rd., Arlington Heights, IL 60005 92 Order Department (847) 437-1288· Main (847) 437-1205· FAX (847) 437-4183 02-1342 43~" SHEATH - Brown Oil Finished Leather Sheath with stitched belt loop on back.
    [Show full text]
  • Application of a Novel Osteotomy Instrumentation As a Substitute Tool in Total Hip Arthroplasty
    Application of a Novel Osteotomy Instrumentation as a Substitute Tool in Total Hip Arthroplasty Yuehao Hu Shanghai Ninth People's Hospital Jingwei Zhang Shanghai Ninth People's Hospital Ziyang Sun Shanghai Sixth People's Hospital Degang Yu Shanghai Ninth People's Hospital Huiwu Li Shanghai Ninth People's Hospital Zhenan Zhu Shanghai Ninth People's Hospital Yuanqing Mao Shanghai Ninth People's Hospital Mengning Yan Shanghai Ninth People's Hospital Zanjing Zhai ( [email protected] ) Shanghai Ninth People's Hospital Research Article Keywords: Total hip arthroplasty, osteotomy instrumentation, femoral neck osteotomy Posted Date: May 27th, 2021 DOI: https://doi.org/10.21203/rs.3.rs-539000/v1 License: This work is licensed under a Creative Commons Attribution 4.0 International License. Read Full License Page 1/13 Abstract Background: Mechanical failure, power shortage, and unexpected contamination of oscillating saw occasionally happened in actualizing femoral neck osteotomy during total hip arthroplasty, while no appropriate alternative solution be available presently. This study aimed to introduce a novel osteotomy instrumentation (fretsaw, jig, cable passer hook) as a substitute tool while oscillating saw was unavailable in THA. Methods: This study included 40 patients (40 hips) who underwent femoral neck osteotomy during primary THA using the new osteotomy instrumentation (n=20) and oscillating saw (n=20). Clinical data and intraoperative ndings of all patients were evaluated. Results: The mean osteotomy time was 22.3 ± 3.1 s (range, 17–30 s) and 29.4 ± 3.7 s (range, 25–39 s) in the oscillating saw group and the new osteotomy instrumentation group, respectively (P<0.001).
    [Show full text]
  • Wood Preservation Manual Wood Preservation Manual
    Wood preservation manual Wood preservation manual Mechanical Wood Products Branch Forest I ndustries Division FAD Forestry Department The designations employed and the presentation of material in this publication do not imply the expression of any opinion whatsoever on the part of the Food and Agriculture Organization of the United Nations concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries. M-34 ISBN 92-5-102470-7 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying or otherwise, without the prior permission of the copyright owner. Applications for such permission, with a statement of the purpose and extent of the reproduction, should be addressed to the Director, Publications Division, Food and Agriculture Organization of the United Nations, Via delle Terme di Caracalla, 00100 Rome, Italy. © FAD 1986 - i - CONTENTS Page CHAPTER 1 INTRODUCTION 1 Background and the purpose of the manual CHAPTER 2 WHAT IS PRESERVATION? 2 Importance, benefits and economics of wood preservation, protective measures, protection by specification, protection by design detailing CHAPTER 3 NATURE OF WOOD 13 Wood structure, classes of wood, moisture content and natural durability CHAPTER 4 DECAY HAZARDS 21 Fungi, insects, borers, weathering, fire CHAPTER 5 WOOD PRESERVATIVES 32 Properties, ideal preservative, types of preservatives, tar oils,
    [Show full text]