BATTERY SYSTEM TESTER PAGE 7

1" DRIVE AIR IMPACT WRENCH PAGE 4

EPIQ™ 68" 10-DRAWER ROLL CAB PAGE 12

Offer expires: OCTOBER 31, 2015 Order now! Limited quantities available. 2 HAND TOOLS

3/4" Drive Adjustable Click-Type Torque Wrench TQR600E $895.00 • 200-600 ft. lbs. torque range and 49" length 3/4" Drive Adjustable Click-Type Fixed Head Torque Wrench • Sealed ratchet head is virtually maintenance free QD4R600 $799.95 $719.95 • Thumb screw-type adjustment is faster than cycling through a micrometer • 120-600 ft. lbs. torque range and 43" length • Guard prevents setting from being changed accidentally • Provides consistently accurate readings to ±4% clockwise and ±6% • Cushion grip handle provides comfort and control counterclockwise from 20% of full scale to full scale • Non-reversible design for measuring torque in a clockwise direction only • Sealed ratchet head is virtually maintenance free • Disassembles to 3 pieces for storage/transport (includes plastic case) • Cannot be accidentally disassembled if wound down past scale

S80A L872RM Sealed Ratchet Heads Locking Button Handles L872 (3/4" Drive) L872RM $111.00 $99.90 $259.95 $233.95 • 3/4" Drive 36" Knurled SR80A L872 L873 (1" Drive) L53HB $139.00 $125.10 $459.95 $413.95 • 1" Drive 29" Plain SL80A

SLF80A 10" Flat Tip Screwdriver Pliers w/ Instinct® Handle Adjustable SLX80A SGD10BR $33.25 $29.95 Wrench • Hex bolster allows a wrench to be PWZ $115.00 $103.50 SHLF80A used for added torque • 3 1/2" Jaw Capacity

SHRLF80A

1/2" Drive 36" Breaker Bar SN36 $182.00 $163.80 SN36 1/2" Drive Dual 80® Technology Based Ratchets • Dual pawl design with Standard Handle patented sealed head S80A (Standard) $149.95 $134.95 Spring Tools $20.65 $18.60 • 7 teeth in contact with SR80A (Quick Release) $164.95 $148.45 SPRG625R (Red) gear to provide strength SL80A (Long) $164.95 $148.45 SPRG625G (Green) and durability SLF80A (Extra Long) $209.95 $188.95 • Up to 25% less ratch- SPRG625O (Orange) SLX80A (Extra Long, Locking) $229.95 $206.95 eting arc to engage the • Deep "V" and "C" grooves for pushing/ pulling springs next gear tooth Soft Grip Handle • Built for strength, preci- SHLF80A (Extra Long) $224.95 $202.46 Tire Valve Tools $16.70 $15.00 sion and durability SHRLF80A (Extra Long, Quick Release) $234.95 $211.45 TR107AR (Red) TR107AG (Green) Combination Square w/ TR107AO (Orange) Protractor & Center Head COMBOSQ3 $346.00 • Reversible Lock Bolt, Scriber, Spirit Level Nut Drivers Set in both Square Head and Protractor Head NDD900B $179.95 $161.95 • Includes hard case with foam insert • Color coded handles for easy I.D. • Includes sizes 3/16"-1/2" Individual Nut Drivers Blue-Point® NDD118BO (9/16" Orange handle) 9" Aluminum 6" Dial Electronic 2" - 6" Dia. Dial Bore Gauge $24.95 $22.45 Lighted Level Caliper Micrometer GA2-6B $303.00 $272.70 NDD120BY (5/8" Yellow handle) TL900L $34.00 $30.60 CAL6D $116.15 MIC0-1E (0-1") $151.80 • Features 11 contacts (.0005" grad.) $25.95 $23.35

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions. HAND TOOLS 3

Heavy Duty Striking Pry Bars • Crown handle protects from off-center hammer strikes • 10" handle for two-handed grip

30" Pry Bars $134.00 $120.60 48" Pry Bars $178.00 $160.20 54" Pry Bars $198.00 $178.20 SPBH30R (30" Red) SPBH48R (48" Red) SPBH54R (54" Red) SPBH30O (30" Orange) SPBH48O (48" Orange) SPBH54O (54" Orange) SPBH30G (30" Green) SPBH48G (48" Green) SPBH54G (54" Green)

Speed Open End / Ratcheting Punch & Chisel Set Pin Punch Set Box End Metric Wrench Set PPC710BK PPCL60BK SRXRM710 $412.40 $371.15 $227.95 $205.15 $175.00 $157.50 • Speed open end provides quick, • Includes assorted center, pin, • Includes sizes ratchet-like action starter, and flat punches and 1/8" to 5/16" • Flank Drive® wrenching system chisels in kit bag on box end provides up to 15-20% more turning power with less risk of tool or fastener damage Truck Anchor • Up to 80 gear teeth for minimal Pin & Bushing movement in tight areas Deep Hex Press Kit • Box ends are offset 15˚ for clearance TAP1 $346.95 $312.25 • 10-Piece set includes sizes 10–19 mm Truck Slack Adjusters • For brake service / slack adjuster installation • Designed to remove brake HSA716 (7/16" Haldex®) $35.65 $32.10 anchor pins & bushings without removing wheel hubs on 16-1/2" Q type S-cam tractor & trailer brake systems from BSA916 (9/16" Bendix®) $53.95 Dana Spicer®, Arvin Meritor® (Rockwell®), Eaton®, Timken® & Fruehauf® vehicles Brake Slack Adjuster Set 4-Piece Ratcheting Box End BT4651 Metric Wrench Set $79.95 $71.95 Truck Wheel • Use on Rockwell and Arvin Meritor slack adjusters XDHRM604 $250.25 $225.25 Seal Removal Tool • 12-Point wrench set includes 10, 13, 15 SRT1 $147.95 $133.15 and 17 mm sizes • Remove seals intact without damaging the bearings • Use on steering, drive and trailer wheel seals

OEX34B Bearing Separators CJ951 (4-1/2") $224.00 $201.60 Flank Drive® & Flank Drive® CJ952 (6-1/8") $384.00 $345.60 CJ951 Plus Combination Wrenches $ ** CJ953 (8-3/4")

Basic Heavy Duty Bushing Driver Set EC 22.72 • 12-point box end is set at 15˚ offset for PER WEEK • 52 WEEKS TERMS $1,070.00 increased clearance A158B $249.00 $224.10 • Flank Drive® grips the flats, providing • Includes eight basic adaptors for servicing up to 20% more turning power than a bushings on trucks, tractors and buses conventional wrench Flank Drive® Plus SOEX34 (1-1/16") $91.25 $82.15 SOEX36 (1-1/8") $109.00 $98.10 SOEX38 (1-3/16") $112.00 $100.80 SOEX40 (1-1/4") $123.00 $110.70 Flank Drive® OEX34B (1-1/16") $83.25 $74.95 Gear Puller Set OEX36B (1-1/8") $101.00 $90.90 Complete Heavy Duty Bushing Driver Set CJ2002 $609.90 $548.91 OEX40B (1-1/4") $117.00 $105.30 A257 $929.00 $836.10 • Makes any of ten different pullers OEX42B (1-5/16") $118.00 $106.20 • Includes large driver handle, large driver nut and • For use on timing gears and carrier side bearings OEX48B (1-1/2") $154.00 $138.60 27 large adaptors (sizes 1-5/16" thru 2-15/16") • 6 to 10 ton capacity

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions. 4 PNEUMATIC POWER TOOLS

1" Drive Air Impact Wrenches Blue-Point® 1" Drive IM1800 $1,125.00 Impact Air Wrench IM1800L (6" anvil) $1,125.00 AT1300A $1,745.00 • 1,800 ft. lb. max. torque output • 3,000 ft. lb. max. torque output • 5,500 free speed RPM IM1800 • 4,000 free speed RPM $ * • 3 position speed control $ * • Pin clutch style impact mechanism EC EC 23.89 20.35

• Full power reverse PER WEEK • 104 WEEKS TERMS PER WEEK • 52 WEEKS TERMS

Blue-Point 1/2" Drive 3/4" Drive Compact Air Impact Wrench Air Impact Wrench MG3255 $435.00 • Lightweight (2.8 lbs.) with slim-style nose MG1250P AT670 $660.00 $594.00 • 325 ft. lb. of max. torque • 1,050 ft. lbs. max. torque • 9,500 free speed RPM

MG1250L Blue-Point 1/2" Drive Air Ratchet AT705B $245.00 $220.50 MG725P MG1250XL MG725L • Delivers 50 ft. lb. of maximum torque 3/4" Drive Air Impact Wrenches 1/2" Drive Air MG1250 (Regular Anvil) $905.00 Impact Wrenches MG1250P (Pinned Anvil) $905.00 MG725 $490.00 1/2" Drive 3/4" 6-Point MG1250L (3" Anvil) $905.00 MG725P (Pinned Anvil) $490.00 Extra Deep Impact Socket MG1250XL (6" Anvil) $905.00 MG725L (3" Anvil) $490.00 S6224 $57.95 $52.15 • 1,200 ft. lb. max. torque output • 810 ft. lbs. max. torque • 6" length for trucks using the 30/30 spring brake chamber

1/2" Drive 1/2" Drive Specialty 1" & 3/4" Drive Impact Sockets 33mm 6-Point 12-Point Deep Impact Sockets Deep Impact Spicer Drive Impact Socket Socket Sets 312SIMDM SIMML333 (1" Drive) $91.25 $82.15 S6260 (1/2", 12-Point) $52.95 $47.65 312SIMDM (Metric) $388.45 $346.60 SIMML332 (3/4" Drive) $79.50 $71.55 • 8" length for removing spicer drive shaft bolts found on • 12-Piece set includes sizes 15-25 & 27 mm • 6" length Kenworth, Peterbilt and other applications 313SIMD (Standard) $420.00 $378.00 Head Bolt Impact Sockets • 13-Piece includes sizes 1/2" to 1-1/4" S6160 (12mm, 12-Point, 8" length) $53.75 $48.35 1" & 3/4" Drive S6194 (12mm, 12-Point, 4-1/8" length) $48.00 $43.20 Budd Wheel • Reaches past cam and rocker assembly to service head bolts Impact Sockets 1/2" Drive Locking Impact Socket Extension Set U-Joint Strap Bolt Impact Socket • 1-1/2" Hex & 13/16" square dual opening S6213 (13mm, 12-Point) $51.95 $46.75 303IMXL $182.00 $163.80 BWD483 (1" Drive) $129.95 $116.95 • 8" length for removing U-Joint strap bolts found • Pull back collar for fast & easy BWD482 (3/4" Drive) $98.60 $88.75 on Volvo, Mack and other applications attachment of sockets • Ideal for use on transmission bellhousing Driveline Impact Socket bolts, transaxle and suspension service S6197 (1/2", 12-Point) $44.95 $40.45 3/4" Drive • Includes sizes 3-1/2", 5" and 10" • For Kenworth / Peterbilt drivelines 3/4" 12-Point Thin-Walled Impact Socket 1/2" Drive 3/8" Drive Snap Ring Retention IMFDL242 $58.25 $52.40 6-Point Impact Socket Extensions Set • Removes head bolts on Caterpillar Swivel C12, C15, C16 & 3406E 204IMXA $96.75 $87.08 Socket Sets 307IPLY • Includes sizes 1-3/4", 3", 6" & 11" 307IPLMY (Metric) $449.25 $404.33 3/4" Drive 19mm • Includes sizes 14-15, 17, 18, 19, 21 and 24 mm 3/8" Drive Hex Bit Socket 3/8" 307IPLY (Standard) $423.75 $381.38 Hose Clamp LAWM19E $67.25 $60.53 Drive • Includes sizes 9/16"-3/4", 7/8"-15/16", & 1-1/8" Socket Set 12-Point 204FIHC $92.20 $82.98 Shallow Swivel 1/2" Drive 5/8" 12-Point • Sizes 7/16", 1/2", 8 & 10 mm 3/4" Drive TORX® Impact Socket Swivel Impact Socket • For extra long band clamps found on Impact Sockets ® ® ® IPDF12A IPRD20 $56.95 $51.25 Freightliner , Peterbilt , Kenworth , T802E (T80) $62.00 $55.80 ® ® ® $40.00 $36.00 • Low profile 2" length for starter bolts found on International , Caterpillar Acert • For Meritor® brakes ® • Full 30˚ swivel action International, Caterpillar and Cummins engines and Cummins ISX engines

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions. PNEUMATIC POWER TOOLS 5

3" Air Cut-Off Tool PT430 $269.00 • 1 HP with 25,000 free speed RPM Super Duty Air Hammer Crud Thug® Removal Air Tool PH3050BR $399.00 • 2,500 BPM PT280THUGA $530.00 • Variable speed soft touch • Quickly remove seam sealers, rust, paint etc. 3" Air trigger and air regulator • Adjustable exhaust • 10-position power/speed regulator Cut-Off Tool • Includes 1 fine wire wheel and 1 coarse wire wheel PT250A $249.00 • 0.5 HP with 22,000 free speed RPM • 10-position power/speed regulator

Blue-Point Heavy Duty Heavy Duty Air Die Grinders PT400L 4" Air Hammer Right Angle PT400 $279.00 AT2050 $213.00 $191.70 Air Cut-Off Tool PT400L (3-3/4" Long Shaft) $310.00 • 3,400 BPM PT490 $365.00 PT410 (3" Right Angle) $330.00 • Instinct® side handle • 1.0 HP with 23,000 free speed RPM • 1 HP with 12,000 free speed RPM • 3-3/4" steel shaft for extra reach Air Hammer Bit Set PHG1055K $218.00 $196.20 • Set includes double bladed panel cutter, drift punch, flat chisel, round hammer and tapered punch

Blue-Point® 4" Reversible Air Cut-Off Tool AT154RA $299.95 $269.95 • 0.7 HP with 13,000 free speed RPM • 14.3" overall length for extended reach 1/2" Capacity Air Die Grinders Reversible Air Drill PT200A (Straight) $259.00 PDR5000A $435.00 PT200AL (10" Extended) $289.00 • Reversible variable speed trigger PT210A (Right Angle) $310.00 for more controlled, precise drilling • 1/2 HP / 22,000 free speed RPM

Right Angle Reciprocating Air Saw w/ Dual-Chuck Air Die Grinder PTS1000 $309.00 • 10,000 free speed SPM PT450 (4-1/2") • Accepts both standard/reciprocating saw blades $330.00 • Cuts 1/8" (3mm) thick mild steel • 4-1/2" Blue-Point 3/8" Right Angle Air Drill • 12,000 free speed RPM AT811 $233.00 $209.70 • Features Instinct® side handle • Reversible drill features 0-55 in. lbs. torque • 0.25 HP with 1,320 free speed RPM

Blue-Point® Reciprocating Air Saw Blue-Point® AT192A $192.00 $172.80 6" Orbital ® Blue-Point • 0.25 HP with 11,000 free speed SPM Palm Sander 1/4" Right Angle Mini Air Die Grinder • Adjustable blade guard to control cutting depth AT406C $159.00 $143.10 AT109 $139.00 $125.10 • Includes one each bi-metal blades: 18TPI, • Lightweight and durable • 0.02 HP with 20,000 RPM 24TPI and 32TPI • 0.25 HP with 12,000 free speed RPM

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions. 6 DIAGNOSTICS

POWERFUL DIAGNOSTICS FOR COMMERCIAL VEHICLES FROM LIGHT DIESELS TO CLASS 8 $ *

HEAVY-DUTY TRUCKS EC 24.21

PER WEEK • 52 WEEKS TERMS

$ *

EC 23.35

PER WEEK • 208 WEEKS TERMS

BK8000 Digital Imager Digital Camera Videoscopes BK8000-55 BK8000 (Wireless) $1,140.00 $290.00 $263.90 BK6500 (Wired) $850.00 • 5.5 mm, Dual • Features 4.3" diameter touch-screen View, 36" L • Straight or 90˚ angle viewing with 36" • Gets into much dual imager tighter spaces • Powered by rechargeable lithium batteries than standard • Capture digital video and images with 8.5mm imagers internal memory or SD card PRO-LINK® Ultra • For use with • 3-MP rear-view camera (BK8000 only) BK5600, BK6500 EEHD184040 (Starter Kit) $3,349.99 • Transfer data to PC with USB port and BK8000 • Essential maintenance and repair functions: Read & clear fault codes, access trip data to monitor vehicle & driver performance, create health reports, graph live data to verify performance and find tough problems and capture/playback live data recordings, convenient for road tests Leak Detector/ • Coverage for engines, transmissions, ABS, instrument cluster, emissions, and more EVAP Smoke Machine • 8-1/2" touchscreen automatically adjusts brightness for indoor/outdoor use $ * EELD100A • View, save & share results via HDMI, SD memory card, WiFi, Ethernet port & USB port EC 16.33 PER WEEK • 104 WEEKS TERMS $1,399.99 • Starter Kit includes 8 ft data cable, 16-pin J1962 OBDII adapter, 9-pin Deutsch adapter, • Diagnostic Smoke® technology for 6-pin Deutsch adapter, fault code guide book, lithium-ion battery, 120V AC power adapter EVAP testing and carrying case with cushioned foam organizer • Can diagnose 8 of the top 10 emission DTC codes • UltraTraceUV ® non-contaminating ® PRO-LINK Ultra Navistar Maxxforce® Ultra V3 Software dye solution pinpoints leaks Premium Software EEHD865009 $874.99 smoke alone can’t • Individual software suites LMT 2014 Ultra Software ® CAT Ultra Software $ * EEHD865048

® EC 21.76

EEHD864024 (ACERT '03 -'09) $999.99 PER WEEK • 52 WEEKS TERMS (Full Suite) $1,025.00 2,250 Watt Power Inverter EEHD864027 (Electronic '90 -'03) $842.99 EEHD865048U (Update) $574.99 EEPI2250 $535.00 $481.50 Detroit Diesel® Ultra Software • Delivers 2,250 W of continuous EEHD864015 (DDEC (II, III, IV and V) Engines '87-'06) $825.99 power and 4,500 W peak power EEHD864018 (DDEC 6, 10, 13 /Series 60®/MBE Engines '07-'13) $926.99 to run a wide variety of tools, electronics and appliances EEHD864031 (MBE Engines: '01-'06 pre-EPA, '07 MBE 900 & 4000 systems) $449.99 • Hard-wire into tow trucks, construction, fleets and military vehicles Additional engine, transmission and brake software also available.

Manual- Elite True RMS Ranging Meter Auto-Ranging Meter EEDM503D EEDM596EK $589.99 $530.95 $172.00 $154.80 • True RMS with color display • Dial selectable • Measures AC/DC volts, AC/DC millivolts, ohms, continuity, ohms, AC/DC volts, Backprobes AC/DC amps and diode, microamps, milliamps, Modular Test Leads Kit MTTL7005PK diode functions amps, hertz, capacitance and MTTL800 $171.00 $153.90 $39.75 • Economical value temperature • Includes back probes, modular • Color coded with a great • Built-in automotive inductive test leads, crocodile clips, piercing for easy feature set pick-up for tach, duty cycle, dwell probes, grabbers, modular prods, and pulse width tests springhooks in travel pouch identification

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions. DIAGNOSTICS & LIGHTING 7

D-TACTM Elite Diagnostic Tester & Charger EECS306C $3,899.99 • The D-TAC Elite features a 6/12 volt diagnostic charger, 12/24 volt battery, starting and charging $ *

EC 27.18 system tester, engine starter and 60 amp maximum

PER WEEK • 208 WEEKS TERMS flash-reprogram • D MM and cable voltage drop tester (with optional ​EECS750 EECS306-4 Lead Set sold separately) tests low volt ​EECS350 automotive, amps, ohms, diode and basic oscilloscope • MicroVAT top analyzer can be removed to diagnose Battery System Testers other vehicles during diagnostic charge session EECS350 (Enhanced) $429.99 $386.99 • Features printer with customizable shop info EECS750 (Advanced) $979.99 $881.99 • 3.5" large full color ¼" VGA display, color icons and • Superior accuracy with CCA required input and conductance technology test result graphics for rendering battery, starter and charging system status • Tests batteries from 100-2000 CCA (see chart) • Displays battery condition, voltage and more • Features cable integrity technology and reverse polarity protection D-TAC Elite Cover • Select from 7 languages for on-screen commands & reports EECS306C-CVR $91.50 $82.35 • Optional protective Enhanced​ ​ Advanced​ ​ vinyl cover for D-TAC Model ​EECS350​ ​EECS750​ Display ​LCD backlit (3.1")​ ​Color (3.5"​) Communication ​IR​ ​IR, USB​ 6/12 or 12/24 Volt Battery Chargers Clamps ​Medium​ ​Large​ Cable length ​4' Fixed​ ​10' Replaceable​ EEBC400 (6 & 12 Volt) $619.99 $557.95 CCA Range ​100–1,700​ ​100–2,000​ EEBC400F (12 & 24 Volt) $649.99 $584.95 Volts ​6/8/12​ ​6/12/24​ • Fully automatic microprocessor-controlled operation, Rating Systems ​SAE, EN, IEC, DIN, JIS​ ​SAE, EN, IEC, DIN, JIS​ 20-second crank time plus a manual mode Battery Types ​Standard, AGM, EFB​ ​Standard, AGM, EFB​ • For manual / automatic charging of standard Battery Packs ​No​ ​Yes Series/Parallel​ automotive, deep-cycle, AGM, and gel batteries Display % of CCA ​•​ ​ • The EEBC400 has 4/10/50 Amp charging rates for Displays State-of-Charge Graph ​•​ ​•​ automotive shops Detects and Displays Bad Cell ​•​ ​•​ • The EEBC400F has 4/10/25 Amp charging rates for Poor Connection Detection ​•​ ​•​ truck fleets and industrial vehicles Post Adaptors ​•​ ​•​ Surface Charge Warning ​•​ Printer Optional IR or PC​ Integrated Lithium-Ion Rechargeable LED Flashlight Custom Shop Info on printouts ​•​ ​•​ ECF990R $249.95 ​Starting/charging/ ​Menu driven routine w/ $224.95 System Test • Shock-proof and water-resistant aluminum ripple/voltage​ ripple detection and graph​ • 3.7 Volt, 2200mAh, 540 Lumens, 728' range

90-LED Underhood LED Light CTLUH761 $179.95 • 800 lumens, ultra bright light features high-impact housing and light tube, expandable 81" clamp, hook with peg and 10-minute low battery indicator • Battery and charger not included

Blue-Point® USB Rechargeable Shop Light • 350 lumens light output 60-LED Cordless Light • Lithium-ion battery provides 3 hours run time CTLU761 $89.95 • Features 180˚ hinged magnetic base plus top • 540 lumens light features hook, high impact hook and includes USB cord and wall charger housing and 10-minute low battery indicator ECFBP6 $99.95 $89.95 • Battery and charger not included Blue-Point LED Floodlight ECFLOOD $207.00 $186.30 Lithium Rechargeable Shop Light • 2,500 Lumens from 70 high output SMD LEDs ECFBARLED $135.00 $121.50 • Rubber-edged aluminum frame • Bright, 500 Lumen output with 2 power levels • IP65 resistant to water and dust infiltration • 3.7 V Lithium-ion battery • 25' (7.6m) cord for excellent reach

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions. 8 CORDLESS POWER TOOLS

18 Volt Lithium 18 Volt 14.4V 1/2" Drive Ni-Cad Micro-Lithium Impact Wrench 1/2" Drive Screwdriver CT8850 $719.95 Impact CTS761 $359.95 • 600 ft. lbs. torque with Wrench • 150 in. lbs. torque output variable speed digital switch CT6818 $599.95 • 1,400 RPM • Built-in LED light • 500 ft. lbs. torque • 1/4" hex capacity • Includes two 18 volt batteries, with variable speed • 2-speeds, 9-position charger and tote digital switch clutch and built-in LED light Quick Change Chuck Version • Built-in LED light • Includes two 18 volt • Includes two batteries, CT8850QCDB $379.95 batteries, charger charger and tote • 7/16" hex quick change chuck and tote • Tool body only (no batteries included)

14.4V 3/8" Drive Micro-Lithium Ratchet 18 Volt Lithium 18 Volt 3/8" Drive ENJOY THE FREEDOM OF Ni-Cad WORKING WITHOUT AN Impact Wrench 3/8" Drive AIR SOURCE! CT8810A $619.95 Impact Wrench CTR761B $389.95 • 325 ft. lbs. bolt breakaway torque CT4418 $499.95 • 40 ft. lbs. torque output at • 230 ft. lbs. tightening torque • 180 ft. lbs. torque with 275 RPM • Built-in LED and battery fuel gauge variable speed • Features a built-in LED light, • Includes two batteries, digital switch battery fuel gauge, variable 4.0 Ah charger and tote • Built-in LED light speed trigger Quick Change Chuck Version • Includes two 18 volt • Includes battery, charger CT8810AQCDB $279.95 batteries, charger and case • 1/4" hex quick change chuck and tote • Tool body only (no batteries included)

18V 14.4V Monster-Lithium Micro-Lithium Reciprocating Saw Reciprocating Saw CTRS8850 $589.95 CTRS761 $439.95 • Features 2,400 strokes per minute and a fast 60 minute charge time • 3,000 strokes per minute & 1/2" stroke length • Includes one battery, charger and tote • Features dual chuck mechanism, adjustable depth guide, integrated LED light and LED battery gauge indicator

14.4 Volt Micro-Lithium Cordless Drill CDR761A $359.95 • 150 in. lb. torque, 9-position clutch, battery fuel gauge, and 3/8" keyless chuck 18 Volt • Includes two batteries, Lithium charger and tote Hammer Drill CDR8850H $619.95 • 450 in. lb. max torque Thunderbit®/High Speed Steel Jobber 18V Monster-Lithium Grinder • 1/2" chuck with Length 135° Split Point Drill Bit Sets CTGR8850DB $479.95 carbide jaws DBTB129 $272.00 $244.80 • 8,000 free speed RPM • Built-in LED light • 135° split points for easier drill starting without • 4.5" or 5" wheel size with 7/8" arbor • 2 speed 22-position clutch the need for center punching • Tool only (no battery) • Includes two batteries, charger and tote • 29-Piece set includes sizes 1/16" to 1/2"

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions. SHOP EQUIPMENT 9

EEDF400-INJ Wheel-A-Matic Scribe Type Toe Gauges Fuel Disconnect Tool Set WAM0517 $422.10 FDT1116 $139.95 $125.95 •5 & 10" Legs, 11" & 17" pointers • Straight & 90˚ for 11.8mm & 16mm fuel lines EEDF400-EGR • Pointers are adjustable to hub height EEDF400 Wheel-A-Matic Magnetic Wheel Alignment Gauge WAM0684 $651.30 Blue-Point® Diesel EGR & • Camber: +8 degrees to -8 degrees Induction Cleaning Tool • Caster: +14 degrees to -6 degrees EEDF400 $899.99 $854.95 Fuel Pressure • Safely cleans the diesel EGR circuit, coolers, Test Set for $ *

intake, injectors, turbo charger and fuel system ® EC 22.47 Wheel-A-Matic

Compucheck PER WEEK • 104 WEEKS TERMS • Increases cetane & enhances fuel atomization for Engines Turntable Set more complete combustion WAM1100 $1,926.50 • Lowers emissions, smooths rough idle, improves EEDF501 $399.99 $359.95 • Includes male Compucheck test port for installa- • 14" dia., 10,000 lbs. fuel economy and performance per wheel capacity • Optional adaptors available for Ford®, Duramax®, tion in vehicles without Compucheck test ports Mercedes®, Cummins®, Isuzu®, BMW®, Audi® and VW® engines • Cleaning solution required sold separately Fuel Pressure Wheel-A-Matic Truck Front Slip Plate Set Test Set Diesel EGR & Induction Cleaner WAM1841 $580.40 for Ford • Allows unrestricted EEDF400-EGR $199.99 $179.99 ® • Twelve 32 oz. bottles Power Stroke movement of front Engines tires to make accurate Diesel Fuel Injection Cleaner EEDF502 adjustments EEDF400-INJ $99.99 $89.99 $397.00 $357.50 • Twelve 12 oz. bottles • Helps prevent a lean condition that may cause Wheel-A-Matic burning of injectors or scorched cylinders Tandem Tracker Set Large Truck WAM1888L Cooling System $172.00 • Measures tracking of tandem axels Adaptor Set Fuel Pressure Test Set SVTA6100 for Duramax Engines $324.00 $291.60 EEDF500 $344.00 $309.50 • Combine with SVTS263A • Test diesel fuel to provide virtually pressure and 100% truck coverage vacuum on GM® Wheel-A-Matic Trailer Kingpin Extension 6.6L Duramax engines WAM1889 $258.60 • Includes compound • Makes fast, accurate measurements from the kingpin gauge with a 0-15 psi center to the trailer tandems Air Powered (0-100 kPa) pressure plus Cooling System 0-30 in Hg vacuum scale and a Pressure Tester protective rubber boot SVTS263A $253.00 $227.70 • Use shop air to test for leaks 0-800 PSI Diesel • Sensitive pressure regulation allows safe testing Wheel-A-Matic of both small and large systems Compression Gauge EEPD500 $221.00 $198.90 Tandem Tracker Set • 9 to 800 PSI (0 to 5,500 kPa) WAM1890 $395.75 • Includes 18" hose with release valve • Use with WAM1889 to measure tracking of tandem axles Aluminum Hose Nozzle NOZZLEPG2 $69.95 $62.95 Dual Foot • 2-way shut-off allows Air Chuck Wheel-A-Matic spray pattern to GA359 $46.95 $42.25 Tandem Axle Spacing Caliper remain the same • Access hard to reach inner tandem wheels WAM1891 $205.80 when turning on/off • Tilt lock feature locks onto the valve • Check spacing between axles of tractors and/or trailers

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions. 10 SHOP EQUIPMENT

$ * 350A “Muscle MIG” Welder $ * EC 29.81 EC 16.91 TERMS PER WEEK • 260 WEEKS MM350XL $4,915.00 PER WEEK • 104 WEEKS TERMS

$ * 270A “Muscle MIG” Welder

EC 26.20

PER WEEK • 208 WEEKS TERMS MM250SL $3,760.00

$ * 220A MIG Welder

EC 21.58

PER WEEK • 156 WEEKS TERMS MIG220 $2,535.00

Snap-on® MIG Welders have higher Aluminum Spool Guns MM250SL duty cycles at maximum amperage • Adds aluminum welding capabilities to MIG welders for longer continuous weld times MHG5A $1,450.00 MHG5B $1,450.00 and performance that surpasses the • For use with MIG220, • For use with MM140SL, competition. Specifications MM350XL MM250SL MIG220 FM140A & YA212AIND MM250SL & MM350XL • Wire feed assembly features 800 in./ Weld Amps 350 270 220 min. delivery for consistent wire speeds Single Pass Thickness 7/16" 3/8" 5/16" • Capacitor bank and diode set deliver consistent voltage and industry-leading Detatchable Feeder Yes Yes No ® smooth-arc characteristics Duty Cycle Rating 300A-100% 185A-100% 185A-60% Blue-Point • All-copper wound, tapped transformer Butane Blow Torch Input Voltage (A/C) 208/230 208/230 208/230 features Nomex® insulation and bolted TORCH4 $60.95 $54.85 laminations to provide precise voltage Optional TIG Pack FLEXTIG25 FLEXTIG25 CKSTP2125A • Flames reach 2,400˚ F control and repeatable welds Optional Aluminum Spoolgun MHG5B MHG5B MHG5A • Great for light gauge silver soldering, brazing, welding Cart Included Yes Yes Yes and electronic repair

$ *

EC 25.11

PER WEEK • 260 WEEKS TERMS $1,380.00 DOWN PAYMENT WELDER & PLASMA CUTTER OR TRADE-IN Plasma Cutters TECHNICAL SUPPORT PLASMA60i $5,520.00 800-ABC-WELD PLASMA60i PLASMA50 $4,555.00 PLASMA30i $3,760.00 • Compact torch handle for hard-to-reach areas

Specifications PLASMA60i PLASMA50 PLASMA30i Max Output Amps Adjustable 20 to 55 30 or 50 Adjustable 5 to 25

Cut Thickness 3/4" 1/2" 3/8"

Sever Thickness 1" 3/4" 1/2"

PLASMA50 Primary Input 208/230 V AC 208/230 V AC 115 or 230 V AC

Primary Input 40 A 30 A 30 A 115 V or 20 A 230 V

$ * Duty Cycle Rating 60% @ 40 A 40% @ 50 A 60% @ 22 A

EC 27.63

PER WEEK • 260 WEEKS TERMS PLASMA30i Min Compressed Air Req. 68 psi @ 7 CFM 88 psi @ 7 CFM 50 psi @ 7 CFM

$ * Torch Cable Length 18' 18' 12'

EC 26.20

PER WEEK • 208 WEEKS TERMS Ground Cable Length 18' 18' 12'

Auto Darkening Welding Helmet Auto-Darkening Welding Helmet w/ Grind Feature EFPGREENSKL $369.95 $332.95 EFP2MORBID $435.00 $391.50 • Features continuous 2" x 4" 4/9-13 Shade • Features sensitivity, delay controls, low battery external adjustable Auto-Darkening Filter and grind flash warning integrated into the 180˚ passive lens • Automatic on/off with lithium Ion battery • External Grind Mode, Shade Sensitivity • Articulating headgear for maximum comfort/sizing and Delay controls • Fast protective lens change system • Lightweight, hi-impact with military grade • 40 square inches of viewing area anti-scratch coating • Includes clear shade #4, #9-13

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions. SHOP EQUIPMENT 11

® $ * Blue-Point 22-Ton Air Blue-Point 4-Ton Air/Hydraulic EC 21.85

PER WEEK • 208 WEEKS TERMS Operated Floor Jack Long Chassis Service Jack YA1731A YA660C $2,650.00 $885.00 $796.50 • Hydraulic pump mechanism is operated • Adjustable extension by handle or foot pedal screw raises • Knob style load release in $ *

EC 22.56

saddle height 42" handle end for PER WEEK • 156 WEEKS TERMS Blue-Point • Uses standard precise control 1-Ton Wishbone shop air (110 psi • T-handle provides Hydraulic Transmission Jack additional to 175 psi) YA727B $3,135.00 positioning • For use on bus, truck, farm, automotive and assistance construction vehicles

Adjustable Chair Back Seat Creepers JCW95AR (Red) $234.00 $210.60 JCW95ABL (Black) $234.00 $210.60 • Adjusts from 14" to 19"

40" Heavy Duty 40" Heavy-Duty Creepers Adjustable Creepers JCW70AR (Red) $248.00 $223.20 Adjustable JCW75AR (Red) $270.00 $243.00 JCW70ABL (Black) $248.00 $223.20 Round Seat Creeper JCW75ABL (Black) $270.00 $243.00 • Features four 4" inline swivel casters JCW90ABL $160.00 $144.00 • Features four 4" inline swivel casters • Adjusts from 14" to 19"

Cart Mounted Electric 11-Gallon Wet/Dry Shop Vacuum Pressure Washer YA1009SSA $675.00 $607.50 SEPW1500USA $2,400.00 • Features long-life 2 stage motor, EZ dump • 2 HP, 1,500 PSI unit drain hose and on-board tool storage includes 25' hose • Includes 1.5" wet/dry tool set: hose with • Includes ceramic plunger swivel end, crevice tool, upholstery tool, pump with stainless round dusting tool, single bend wand, two steel valves, trigger straight extensions, floor tool, squeegee gun, chemical injection, tool and tool adaptor $ *

adjustable pressure, EC 20.43

PER WEEK • 156 WEEKS TERMS adjustable 0-60° spray nozzle and GFCI 120 V Wrecker Gloves High Visibility protection GLOVE504BL (L, Black) Wrecker Gloves with 35-ft. GLOVE504BXL (XL, Black) GLOVE504HL (L) power cord $72.50 $65.25 GLOVE504HXL (XL) • Extreme all-over protection $72.50 $65.25 • Cut resistant palm/thumb • Same as GLOVE504B • Reflective accents in "hi-vis" yellow

Hand & Tool Cleaning Impact Gloves Padded Genuine Leather Gloves Towels GLOVE306M (M) GLOVE700M (M) GLOVE700L (L) WOD5020 $20.90 $18.81 GLOVE306L (L) • Contains lanolin and rust GLOVE306XL (XL) GLOVE700XL (XL) preventatives GLOVE306XX (XXL) $50.95 $45.85 • Durable synthetic $57.00 $51.30 leather palm section • Molded rubber with heavy padding Fingernail Brush knuckles on top reduces vibration WOD1000 $7.60 $6.84 of hand from tools

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions. 12 TOOL STORAGE

KRA2423PJK $ *

EC 27.73

PER WEEK • 260 WEEKS TERMS $1,523.75 DOWN PAYMENT OR TRADE-IN Red Gloss Royal Extreme KEMN361A7PN Black Blue Green PBO PC PCM PJJ $ * EC 24.09

73" 17-Drawer Roll Cab PER WEEK • 260 WEEKS TERMS $1,323.75 DOWN PAYMENT KRA2423 $6,095.00 OR TRADE-IN • Two 50" extra wide drawers (5" and 3") KEMN361A1PBO • Measures: 73" W x 24" D x 39" H Electric Flat White TM Orange Black EPIQ 37" 6-Drawer TM • Capacity: 31,237 cu. in. PJK POT PU SideKIQ Roll Carts KEMN361A1 (Stainless Steel Top) $5,295.00 KEMN361A7 (Bedliner Top) $5,295.00 • Same 48" height as EPIQ roll cab • 8" deep top compartment for storage of larger items • InPulse™ drawers are easy to open/close and don't drift • ISO-Ride ® 7x2" swivel-lock mag wheels with independent torsion spring suspension roll smooth over rough surfaces • Six heavy duty drawers hold 227 lb per drawer • Measures: 37" W x 30" D x 48" H • Capacity: 6,027 cu. in.

Color Options (Stainless Red Gloss Royal Candy Apple Extreme Electric Black Blue Red Green Orange Steel Lid) PBO PC PCM PJH PJJ PJK

Color KETN682A0PJJ Options (Bed-liner Red Gloss Royal Candy Apple Extreme Electric Black Blue Red Green Orange Lid) PN PFI PET PPS PKG PKH EPIQTM 68" 10-Drawer Roll Cab KETN682A0 $11,335.00 • Three extra wide drawers at the top for the most often used tools

• EPIQ™ strength features additional top, bottom and side support ® • InPulse™ drawers are easy to open/close and don't drift Blue-Point • ISO-Ride ® 7x2" swivel-lock mag wheels with independent torsion spring suspension Heavy-Duty roll smooth over rough surfaces Workbench • Measures: 68" W x 30" D x 48" H BPWORKBENCH • Capacity: 45,147 cu. in. $515.00 $463.50 • Measures: 60" x 30" x 34" $ * • Weight Capacity: 1,200 lb. EC 51.57

PER WEEK • 260 WEEKS TERMS $2,83 3.75 DOWN PAYMENT Red Gloss Royal Candy Apple Extreme Electric Flat OR TRADE-IN Black Blue Red Green Orange Black PBO PC PCM PJH PJJ PJK POT

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice below for additional terms and conditions.

Important Credit Notice: Please be aware that the weekly payment is an estimate only and may not apply to you. Your actual payment may be different than the estimated financing payment shown. All credit sale con- tracts are subject to approved credit and the terms of the standard Snap-on Credit credit sales contract form. Not all applicants will qualify. Taxes, installation and costs of financing, such as charges for filing UCC state- ments, are extra. Finance charges begin accruing at contract inception. Weekly payments shown are based on suggested list prices and your price may vary. Terms and finance charge rates may vary and such terms are subject to change without notice. In the event you fail to make payments when due, the terms of the contract will apply and late charges may be due. Please contact us regarding finance terms and restrictions. While every attempt is made to ensure accuracy, errors during publication can occur. Product features and specifications can change. Pricing can change. Pricing is for U.S. market only. Snap-on and Blue-Point are trade marks, registered in the United States and other countries, of Snap-on Incorporated. ©Snap-on Incorporated 2015. All rights reserved. All other marks are trade marks of their respective holders. HD2015