Engineering Services
Frac Tanks:
Frac Tank
Frac Tanks are constructed to hold up under adverse conditions when they are moved to postion for use in the field.
Tanks have a convienent hatch located at ground level and connectors for switch and work lights on the side and rear.
The unique V-bottom floor design gives the operator easier cleaning and maintenance of the frac tank. Manufactured with 0.25" the floor on our frac tanks are supported with the strongest undercarriage of any tank in production.
The smooth lined inner walls of our frac tanks eliminate build up of material when compared to the conventional corrugated material used by other manufacturers. This key feature allows for much easier clean out.
We can custom manufacture our frac tanks for valve placement to the customer's specifications. NEEL has manufactured both internally and externally placed valves based upon the needs of our clients.
Click here to download the engineering drawing
Contact Us | Terms and Conditions
- Expertise:
We cater for all offshore and land activities for steel and other metal fabrications including engineering, manufacture, design, and development and also has the facilities for testing.
- Engineering Services:
- Design and development of pressure vessels, baskets, Tanks and other equipment.
- Steel fabrications of all types to 300 tonnes
- Manufacture of offshore equipment
- Buildings
- Offices available for your company if required.
- 10,000 sq foot of fabrication shop with EOT crane covering whole area
- 10,000 sqft of additional area including sand blasting and painting area
- Fully equipped CNC machining Centre
- Forging & Induction casting units
- Equipment
- Cranes:
- 1 X 20 ton crane
- 1 X 10 ton
- 3 X 8 ton
- 2 X 5 ton
- Jib cranes of 500 kg and 1 ton on individual Machine Center
- Forklift, Hydra
- Welding Sets:
- MIG Welding sets: 2 no.s
- TIG Welding Sets : 1 No.s
- Rectifiers and Welding sets: 6 no.s
- Robotic profile cutting machine: 1 no
- Air compressor: 2 no.
- Sand blasting machine: 2 no.
- Shot blasting machine: 1 no.
- Electrode Ovens, testing kits and control
- Post Weld heat treatment setup
Design
NEEL reserves the right to make minor changes in design without notice.
Cancellation
Orders accepted by NEEL are not subject to cancellation by customer except with the consent of NEEL and upon terms which will indemnify NEEL against loss or damage occasioned by such cancellation.
Inspection
Final inspection and acceptance of products must be made at the NEEL plant and shall be conclusive except as regards latent defects. Customer's representatives may inspect at the plant during business hours prior to shipment in such manner as will not interfere with operation.
Engineering and Service
Upon request, NEEL may provide engineering and/or technical information about its products and their uses and if feasible may provide personnel to assist purchase in effecting field installation and/or field service, or assistance so provided, whether with or without charges, shall be advisory only, and purchaser agrees to hold NEEL harmless from claims for loss from any cause resulting from such advisory or service activity.
Warranty
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OF FITNESS. NEEL warrants that all products manufactured by it shall be free of defects in workmanship and material when these products are used within the service and pressure range for which they were manufactured. Such warranty shall be binding upon NEEL for a period of one year from and after shipment of such product. If at any time within such period, it is established to the satisfaction of NEEL that any product manufactured by NEEL was defective at time of shipment, NEEL at its option, shall repair or replace such items F. O.B. place of manufacture or other designated shipping point, or refund the purchase price paid. It is understood that the liability of NEEL shall be limited to such repair or replacement and that NEEL SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY OBJECTS OR FROM ANY CAUSE WHATSOEVER. This warranty does not cover deterioration by corrosion, including stress corrosion or aging of non-metallic parts, or any other cause of failure other than defects in workmanship and material. Any parts or equipment which NEEL does not manufacture shall be subject only to the warranties of NEEL's vendors. Unless repairs to, alterations of, or work done on said product by the purchaser shall be specifically authorised in writing by NEEL, any warranty applicable thereto shall become null and void.
Liability Consideration
Purchaser will indemnify and hold NEEL harmless from all claims including but not limited to subsurface damage and surface damages arising from subsurface damage, including damage to underground mineral pools reservoirs, equipment, deposits, or waste on such deposits, whether owned by purchaser or a third party, resulting from performance of this contract, whether or not due to NEEL's negligence
Contact Us | Terms and Conditions
About Us / N.E.E.L Advantage / Equipment & Services / Capabilities / Contact Us
- Professionalism
- Integrity
- Technology
- Dedication
- Quality
- Delivery
About Us / N.E.E.L Advantage / Equipment & Services / Capabilities / Contact Us
Stainless Steel Tank:
We fabricate all sizes and multiple safe working loads of Stainless Steel tanks.
Click here to download the engineering drawing for our standard Stainless Steels tanks
Contact Us | Terms and Conditions
Oil Boom Burner:
Burner boom is a modular design, basically consisting of two sections that extend approximately 18 m [60 ft]. By adding one or two intermediate sections, the boom can be lengthened to about 27 m [90 ft] or 36 m [120 ft]. The structural design of the U-boom allows access to the burner and supports pipes that are laterally positioned on the boom sides. These pipes supply the burner with air, water, oil, and propane. The U-boom is mounted on the rig with a rotating base plate and guy lines. Horizontal guy lines help orient the boom; and vertical guy lines, which are fixed to the rig's main structure, support the boom. The rotating base enables horizontal and vertical positioning of the boom and burner. The boom is positioned slightly above horizontal so that any oil left in the piping after flaring operations does not leak out and cause pollution.
Applications:
- Provide support for the burner and piping
- Allow access to the burner and piping
- Reduce heat radiation
- Protect rig personnel
- Limit burner noise on the rig
- Modular design
- Suitable for H2S service
- Available in two or three sections
- Piping for oil, water with filter, air with check valve, and propane, in addition to one gas flare
Contact Us | Terms and Conditions