Stelrad.Com Bleeding a Radiator the Process of Bleeding a Stelrad

Total Page：16

File Type：pdf, Size：1020Kb

Stelrad.Com Bleeding a Radiator the Process of Bleeding a Stelrad

Stelrad Limited Telephone: +44 (0) 1709 578950 Stelrad House, Marriott Road Facsimile: +44 (0) 1709 572200 Mexborough, South Yorkshire S64 8BN Stelrad.com Bleeding a Radiator The process of bleeding a Stelrad Radiator is to let out any trapped air that is inside the radiator. Bleeding your Stelrad Radiator will improve the efficiency of your heating system. This guide has been designed to guide you through the process of bleeding your Stelrad Radiator safely, should you have any concerns, please seek professional advice. To bleed your Stelrad Radiator you will need the following tools: • A radiator bleed key/Flat headed screwdriver • A cloth/Small hand towel Step 1 Ensure your central heating and hot water are switched off at the boiler, and that the radiator you are planning to bleed is completely cooled. Step 2 To locate the valve to bleed the Stelrad Radiator, check along the top edge of the radiator - the release valve is a square shape inside of a round hole. Place your radiator key and twist anticlockwise slowly, just a quarter to a half turn (never fully open the valve). You will hear a hissing sound as the air escapes. Step 3 When you hear the hissing sound of the air escaping, hold your cloth beneath the valve to catch any water. As soon as water is escaping, close the valve back up on the Stelrad radiator by turning the radiator key clockwise. Step 4 Repeat the bleeding process on any other Stelrad Radiator that requires it – starting on the Stelrad radiators downstairs and then moving upstairs if required. Step 5 Check the pressure gauge on your boiler, if it has fallen too low, it will need to be topped up – to find out how to do this, please see your boiler manual. Step 6 Turn your heating system back on, all radiators should now be hot and not have any cold spots. If you find that you have to bleed your Stelrad Radiators frequently you may have underlying problems – if this is the case, seek professional advice. Stelrad Limited Registered Office: 69-75 Side Newcastle upon Tyne NE1 3JE. Registered in England no. 2263368 .

Copy Link

Recommended publications

Avionics Thermal Management of Airborne Electronic Equipment, 50 Years Later
FALL 2017 electronics-cooling.com THERMAL LIVE 2017 TECHNICAL PROGRAM Avionics Thermal Management of Advances in Vapor Compression Airborne Electronic Electronics Cooling Equipment, 50 Years Later Thermal Management Considerations in High Power Coaxial Attenuators and Terminations Thermal Management of Onboard Charger in E-Vehicles Reliability of Nano-sintered Silver Die Attach Materials ESTIMATING INTERNAL AIR ThermalRESEARCH Energy Harvesting ROUNDUP: with COOLING TEMPERATURE OCTOBERNext Generation 2017 CoolingEDITION for REDUCTION IN A CLOSED BOX Automotive Electronics UTILIZING THERMOELECTRICALLY ENHANCED HEAT REJECTION Application of Metallic TIMs for Harsh Environments and Non-flat Surfaces ONLINE EVENT October 24 - 25, 2017 The Largest Single Thermal Management Event of The Year - Anywhere. Thermal Live™ is a new concept in education and networking in thermal management - a FREE 2-day online event for electronics and mechanical engineers to learn the latest in thermal management techniques and topics. Produced by Electronics Cooling® magazine, and launched in October 2015 for the first time, Thermal Live™ features webinars, roundtables, whitepapers, and videos... and there is no cost to attend. For more information about Technical Programs, Thermal Management Resources, Sponsors & Presenters please visit: thermal.live Presented by CONTENTS www.electronics-cooling.com 2 EDITORIAL PUBLISHED BY In the End, Entropy Always Wins… But Not Yet! ITEM Media 1000 Germantown Pike, F-2 Jean-Jacques (JJ) DeLisle Plymouth Meeting, PA 19462 USA
[Show full text]
Using Radiators with Wetback Fires the Joy of Fire with the Comfort of Central Heating
using radiators with wetback fires The joy of fire with the comfort of central heating. Heating Radiators with Fire Log burners are commonly available with a wetback system that heats • Heat more of your home with a hot water cylinder. It’s possible to extend the functionality of the your fire wetback by using radiators to spread the heat to other parts of the house. • Radiators available in a This means you can get the pleasure of watching a fire burn in your living variety of styles and endless room while the rest of the home is brought to a comfortable temperature colour options by the radiators. • Using a cheap and reliable People often try to move the hot air from a fire into other parts of the source of firewood means no house with duct work. Moving heat with water is so much more effective additional fuel costs as water transports energy four times better than air. The number of radiators you can heat depends on the heat output of the wetback and the rating of the radiators. A typical wetback only provides 2 to 4kW of heat as this is all that is needed to heat a hot water cylinder if the fire is on for five to ten hours per day. In order to heat a central heating system, a wetback with a higher output is often required. There are fires that have larger wetbacks (up to 15kW) and put out more heat to the wetback, enabling more radiators to be connected. How It Works While the fire is burning, the heat from the combustion process heats water jackets installed within the firebox.
[Show full text]
Modeling and Optimization of a Thermosiphon for Passive Thermal Management Systems
MODELING AND OPTIMIZATION OF A THERMOSIPHON FOR PASSIVE THERMAL MANAGEMENT SYSTEMS A Thesis Presented to The Academic Faculty by Benjamin Haile Loeffler In Partial Fulfillment of the Requirements for the Degree Master of Science in the G. W. Woodruff School of Mechanical Engineering Georgia Institute of Technology December 2012 MODELING AND OPTIMIZATION OF A THERMOSIPHON FOR PASSIVE THERMAL MANAGEMENT SYSTEMS Approved by: Dr. J. Rhett Mayor, Advisor Dr. Sheldon Jeter G. W. Woodruff School of Mechanical G. W. Woodruff School of Mechanical Engineering Engineering Georgia Institute of Technology Georgia Institute of Technology Dr. Srinivas Garimella G. W. Woodruff School of Mechanical Engineering Georgia Institute of Technology Date Approved: 11/12/2012 ACKNOWLEDGEMENTS I would like to first thank my committee members, Dr. Jeter and Dr. Garimella, for their time and consideration in evaluating this work. Their edits and feedback are much appreciated. I would also like to acknowledge my lab mates for the free exchange and discussion of ideas that has challenged all of us to solve problems in new and better ways. In particular, I am grateful to Sam Glauber, Chad Bednar, and David Judah for their hard work on the pragmatic tasks essential to this project. Andrew Semidey has been a patient and insightful mentor since my final terms as an undergrad. I thank him for his tutelage and advice over the years. Without him I would have remained a mediocre heat transfer student at best. Andrew was truly indispensable to my graduate education. I must also thank Dr. Mayor for his guidance, insight, and enthusiasm over the course of this work.
[Show full text]
Consumer Guide: Balancing the Central Heating System
Consumer Guide: Balancing the central heating system System Balancing Keep your home heating system in good working order. Balancing the heating system Balancing of a heating system is a simple process which can improve operating efficiency, comfort and reduce energy usage in wet central heating systems. Many homeowners are unaware of the merits of system balancing -an intuitive, common sense principle that heating engineers use to make new and existing systems operate more efficiently. Why balance? Balancing of the heating system is the process of optimising the distribution of water through the radiators by adjusting the lockshield valve which equalizes the system pressure so it provides the intended indoor climate at optimum energy efficiency and minimal operating cost. To provide the correct heat output each radiator requires a certain flow known as the design flow. If the flow of water through the radiators is not balanced, the result can be that some radiators can take the bulk of the hot water flow from the boiler, leaving other radiators with little flow. This can affect the boiler efficiency and home comfort conditions as some rooms may be too hot or remain cold. There are also other potential problems. Thermostatic radiator valves with too much flow may not operate properly and can be noisy with water “streaming” noises through the valves, particularly as they start to close when the room temperature increases. What causes an unbalanced system? One cause is radiators removed for decorating and then refitted. This can affect the balance of the whole system. Consequently, to overcome poor circulation and cure “cold radiators” the system pump may be put onto a higher speed or the boiler thermostat put onto a higher temperature setting.
[Show full text]
Cooling Modules and Cooling Systems for Agricultural and Forestry Machinery Cooling Systems for Agriculture and Forestry Machinery
Cooling Experts Around the Globe Cooling Modules and Cooling Systems for Agricultural and Forestry Machinery Cooling Systems for Agriculture and Forestry Machinery AKG PRODUCT RANGE Bar/Plate TubeFin Radiator Cooling Air Fins • Strong • Resistant to clogging • Easy to clean / maintain • High efficiency • Durable • Versatile applications • Robust construction • High pressure resistance • Deep cores • Weight optimized Product details • Customer specific design • Cost effective • Low tooling costs • High cooling capacity • Short time to market with • Aluminum header tanks Flexible AKG Hollow Profile proven component options • Highly flexible dimension In many coolers AKG uses hollow • Optimized costs and space claim profiles to reduce local peak strains. • Long lifetime • Side-by-Side arrangement This way the strength of heat ex- • Clogging resistant changers is significantly increased • Global availability and their service life time considera- bly prolonged. TubeFin Charge Air Cooler LightWeight Cooler AKG Hollow Profile Features • Reduced Strain: Strength calculations show that when using AKG hollow profiles maximum strain is reduced by a factor of 2 • Prolonged Service Life Time: • Robust construction • Fully brazed with no welding Extensive rig tests have shown • Deep cores • Light weight & robust construction that the service life time increases • Weight optimized • High performance by a factor ranging from 3 to 5 • Less manufacturing lead time Cooling Systems for Agriculture and Forestry Machinery FORAGE HARVESTER Smoothly functioning harvesters yield highly efficient harvesting performance. AKG cooling systems provide cooling air fins with high specific cooling capacity and resistance to clogging from contamination. The custom engineered AKG cooling systems are characterized by high performance, optimized weight and Tier 4 compatibility. HARVESTING Unfavorable weather and soil conditions are often key factors in beet and potato harvesting.
[Show full text]
Thermosyphon Flooding in Reduced Gravity Environments
THERMOSYPHON FLOODING IN REDUCED GRAVITY ENVIRONMENTS by Marc Andrew Gibson Submitted in partial fulfillment of the requirements For the degree of Master of Science Thesis Advisor: Dr. Joseph M. Prahl Department of Mechanical and Aerospace Engineering Case Western Reserve University January 2013 Case Western Reserve University School of Graduate Studies We hereby approve the thesis of __________________Marc Andrew Gibson___________________ candidate for the Master of Science degree*. (signed) ___________Dr. Joseph Prahl_______________________ (chair of the committee) _________________Dr. Yasuhiro Kamotani_________________ _ _________________Dr. Paul Barnhart_______________________ _________________Lee Mason____________________________ (date)__11/19/2012____ *We also certify that written approval has been obtained for any proprietary material contained therein. 1 Table of Contents Abstract ...................................................................................................................................... 9 Chapter 1: Introduction .......................................................................................................... 10 1.1 Heat Rejection of Nuclear Power Systems for Planetary Surface Applications. ............................... 10 1.2 Themosyphons, Heat Pipes, and the effects of Gravity ................................................................... 15 1.3 Thermosyphon limits ......................................................................................................................
[Show full text]
VT117E Traditional Radiator Thermostat
Honeywell VT117E.qxd:Honeywell VT117E 19/03/2010 06:15 Page 1 VT117E Traditional Radiator Thermostat Tried and tested VT117E – traditional radiator thermostat Tried and tested Honeywell VT117E.qxd:Honeywell VT117E 19/03/2010 06:15 Page 2 VT117EVT117E – traditional Traditional radiator Radiator thermostat Thermostat Having Honeywell HomeRadiator Radiator Thermostats Thermostats fitted tofitted radiators to radiators in your in home your homewill allow will allowyou to you control to control each eachroom roomto a different to a different temperature, thusthus ensuringensuring comfortcomfort forfor youryour familyfamily throughoutthroughout youryour homehome whenever whenever your your heating heating system system is is operating. operating. They They are are particularly useful forfor roomsrooms whichwhich couldcould overheatoverheat becausebecause ofof locallocal heat heat gains gains from, from, for for example, example, cooking cooking or or bathing. bathing. Don’t Don’tforget forget that bright that bright sunlight, sunlight, even evenon a coldon a winter’scold winter’s day, canday, cause can cause a room a roomto overheat to overheat if the ifradiator the radiator is not is controlled not controlled by a by a radiator thermostat.thermostat. Frost protection Decorators cap This setting means you can The Decorators Cap replaces leave your heating system the thermostatic head to provide on in very cold weather, manual control when room when you are away from decoration is carried out, thus home, and protect your preventing the possibility of property against freezing. paint splashes on the head and protecting the balancing inside the valve. Energy saving button Simple setting When adjusting the VT117E Operating your Honeywell Home Radiator Thermostat it will Radiator Thermostat is very automatically pause at the easy.
[Show full text]
Radiator Antifreeze Plugging Problem in Gasoline Engines
Radiator/Antifreeze Plugging Problem in Gasoline Engines April 2006 We were recently asked to investigate the problem of a radiator plugged with a white substance that was solid, semi-solid, or gelatinous in consistency depending on where it was removed from in the radiator. <circumstances:< b="">The vehicle that this radiator came from had recently been serviced using a radiator flush product, followed by the addition of new coolant and a cooling system supplement.</circumstances:<> At some point after this service the vehicle was returned to the service location with an overheating problem. It was determined that the radiator was plugged with a white foreign substance requiring the replacement of the radiator and antifreeze. Our investigation centers on the source of the substance that restricted coolant flow in the radiator. We proceeded with laboratory testing of the samples removed from the radiator. What we have found is consistent with what is known as "Silicate Drop Out". Most antifreeze used in North America is Ethylene Glycol based. Corrosion inhibition for aluminum engine and cooling system components that are in contact with coolant (heads, intakes, radiator, e.g.) is generally provided by adding alkali metal silicates and silicone to the coolant. These silicates under certain circumstances (coolant with a depleted additive package (worn out coolant), hard water (water mixed with coolant), high coolant temperature, over concentration of coolant (not enough water)) have a tendency towards "polymerization", which can cause silicate "dropout" or "precipitation" which can lead to gelation of the silicates in the coolant. When this happens, the interior of the cooling system and engine are coated with a white gelatinous material that significantly reduces heat transfer and slows or even stops the circulation of coolant within the system.
[Show full text]
NASA Thermal Management Systems Technology Area Roadmap
National Aeronautics and Space Administration DRAFT TheRmAl mAnAgemenT SystemS RoadmAp Technology Area 14 Scott A. Hill, Chair Christopher Kostyk Brian Motil William Notardonato Steven Rickman Theodore Swanson November • 2010 DRAFT This page is intentionally left blank DRAFT Table of Contents Foreword Executive Summary TA14-1 1. General Overview TA14-5 1.1. Technical Approach TA14-5 1.2. Benefits TA14-6 1.3. Applicability/Traceability to NASA Strategic Goals, AMPM, DRMs, DRAs TA14-6 1.4. Top Technical Challenges TA14-6 2. Detailed Portfolio Discussion TA14-7 2.1. Cryogenic Systems TA14-8 2.1.1. Passive Thermal Control TA14-8 2.1.2. Active Thermal Control TA14-10 2.1.3. System Integration TA14-12 2.2. Thermal Control Systems (Near Room Temperature) TA14-13 2.2.1. Heat Acquisition TA14-13 2.2.2. Heat Transfer TA14-14 2.2.3. Heat Rejection and Energy Storage TA14-16 2.3. Thermal Protection Systems (TPS) TA14-19 2.3.1. Ascent/Entry TPS TA14-19 2.3.2. Plume Shielding (Convective and Radiative) TA14-22 2.3.3. Sensor Systems and Measurement Technologies TA14-23 3. Interdependency with Other Technology Areas TA14-23 4. Possible Benefits to Other National Needs TA14-23 Acronyms TA14-25 Acknowledgements TA14-25 DRAFT Foreword NASA’s integrated technology roadmap, including both technology pull and technology push strategies, considers a wide range of pathways to advance the nation’s current capabilities. The present state of this effort is documented in NASA’s DRAFT Space Technology Roadmap, an integrated set of fourteen technology area roadmaps, recommending the overall technology investment strategy and prioritization of NASA’s space technology activities.
[Show full text]
Balancing of Radiator Systems Hydronic Engineering Handbook Engineering GREAT Solutions
Balancing of Radiator Systems Hydronic Engineering Handbook Engineering GREAT Solutions Thermostatic Control & Balancing 2 Balancing of Radiator Systems Contents Why balance? ......................................................................................................................... 5 1- Balancing of radiator systems ......................................................................................... 7 1.1- Overflows cause underflows .................................................................................... 7 1.2- Overflows in distribution ........................................................................................... 9 2 Radiator valves .................................................................................................................. 11 2.1- General .................................................................................................................... 11 2.1.1- When the inlet valve is used only to isolate 2.1.2- When the inlet valve is used to isolate and adjust the flow 2.2- What is a thermostatic valve? .................................................................................. 12 2.3- Thermostatic valves and the supply water temperature ........................................... 13 2.4- Is the thermostatic valve a proportional controller? ................................................. 14 2.5- Should a plant be hydraulically balanced with all thermostatic valves fully open? .... 17 2.6- Accuracy to be obtained on the flow .......................................................................
[Show full text]
Thermosyphon Flooding in Reduced Gravity Environments
NASA/TM—2013-216536 Thermosyphon Flooding in Reduced Gravity Environments Marc Andrew Gibson Glenn Research Center, Cleveland, Ohio September 2013 [ # $%?4)4$49:8$%$ [ [! " "#" " # 4$89:8$% "$% ; & *; R ( ) # 4$7$8)8%4+ [ * R )+ ")* & *", && # 4$7$89:8$%) ; ? *, < " # [ http://www.sti.nasa.gov +* # 4+">[email protected] < # ?<"> (#@@BMDHDMHIJB # 4$7$8=4=%)(9= # (# " @@BMDHDMHIJK &># *# # L, ( (# <" $ DOOH( # $%)$%))4%)[ 7=(KOJDPMOBKJ "+ NASA/TM—2013-216536 Thermosyphon Flooding in Reduced Gravity Environments Marc Andrew Gibson Glenn Research Center, Cleveland, Ohio Q)$ $%@@OBH September 2013 Acknowledgments *##["* "(\*#<[ R8=< **\%<\*VW &(8;(W*#<*#" Q)$?% \)Q"% \ Level of Review,"*" $ DOOH( HBJO*) 7=(KOJDPMOBKJ <XKKBOK ",YY*** Contents Abstract ......................................................................................................................................................... 1 1.0 Introduction ............................................................................................................................................ 1 1.1 Heat Rejection of Nuclear Power Systems for Planetary Surface Applications ........................... 1 1.2 Thermosyphons, Heat Pipes, and the Effects of Gravity .............................................................. 4 1.3 Thermosyphon Limits ................................................................................................................... 5 1.3.1 The Flooding Limit Literature Survey .............................................................................
[Show full text]
Transient Radiator Room Heating—Mathematical Model and Solution Algorithm
Article Transient Radiator Room Heating—Mathematical Model and Solution Algorithm Armin Teskeredzic * and Rejhana Blazevic Faculty of Mechanical Engineering, University of Sarajevo, Sarajevo 71000, Bosnia and Herzegovina; [email protected] * Correspondence: [email protected] or [email protected]; Tel.: +387‐62‐991‐918 Received: 2 October 2018; Accepted: 12 November 2018; Published: 18 November 2018 Abstract: A mathematical model and robust numerical solution algorithm for radiator heating of an arbitrary room is presented in this paper. Three separate and coupled transient thermal energy equations are solved. A modified transient heat conduction equation is used for solving the heat transfer at multi‐layer outer walls and room assembly. Heat exchange between the inner walls and the observed room are represented with their own transport equation and the transient thermal energy equation is solved for radiators as well. Explicit coupling of equations and linearization of source terms result in a simple, accurate, and stabile solution algorithm. Verification of the developed methodology is demonstrated on three carefully selected test cases for which an analytical solution can be found. The obtained results show that even for the small temperature differences between inner walls and room air, the corresponding heat flux can be larger than the transmission heat flux through outer walls or windows. The benefits of the current approach are stressed, while the plans for the further development and application of the methodology are highlighted at the end. Keywords: radiator heating; mathematical model; numerical solution algorithm 1. Introduction The current energy policy of the EU member states is promoting energy efficiency in buildings as one of the key pillars in the strategic energy documents.
[Show full text]