Timber Framing Wood Enclosures

Total Page:16

File Type:pdf, Size:1020Kb

Timber Framing Wood Enclosures TIMBER WOOD ENCLOSURES FRAMING The process does not begin As beautiful as a timber in our shop, but rather in the frame is, it is only part of a Timber framing is a forest. Wood is the heart and completed project. Except 2,000 year old tradition soul of what we do. We, in the case of open air of connecting heavy therefore, take great pains to structures, the frame must be timbers into a rigid assure the quality of our enclosed. We generally structural frame using material. We often literally go recommend the use of wooden joinery. The out into the woods to select structural insulated panels (SIPS) for this enclosure. natural beauty of the the trees that will be used in our timber frames. To further wood is enhanced by Ron Balderach & Associates ensure quality control, we the interplay of these These panels are made from timbers and finely operate our own saw mill, dry a sheet of rigid foam crafted joints. A well kilns and planing mill. insulation sandwiched executed timber frame We use many different between two structural delights the eye and woods in our work. There is skins. When applied to the engages the soul. no perfect wood for all projects exterior of the timber as each has its benefits and frame, on both the roof and limitations. Red and White walls, these panels provide Oaks, Southern Yellow Pine, the interior finish surface, The Arkitex Studio exterior sheathing and, Since 1983, Red Douglas Fir, Suspenders Timber Cypress, Walnut most importantly, an efficient Frames has been and Western Red Cedar have all and unbroken layer of carrying on this insulation around the entire tradition of found their way into one or another structure. By combining craftsmanship. these high efficiency panels Working with of our projects. Whenever with energy conscious design, architects, builders and the energy requirements of a possible, we prefer clients, we have building can often be reduced and recommend integrated timber by 50% over conventional the use of dry framing into all types of construction and insulation timbers. Green structures from methods. We generally timbers are often diminutive pavilions to provide and install stress skin Ken Anderson & Associates used in timber panels on the timber frames expansive residential frames, but they shrink, check and move as they dry. To avoid this, we kiln dry and commercial we craft. Any type of finish, almost all of our new timber or use recycled material. Recycled timber is salvaged natural or man made, can be projects. The result of from old structures that have been dismantled after years of service. These applied to the interior and these collaborations is a recycled timbers are generally quite dry and stable. These timbers have a exterior surfaces of these series of buildings that beautiful patina not seen in new material. Nail and bolt holes add character to panels. are as solid and durable individual timbers. There is also the added environmental benefit in using as they are beautiful. recycled materials. The Arkitex Studio DESIGN WHAT ELSE? Timber framing offers Beyond the timber limitless possibilities for frame and structural design. Massive posts and insulated panels, we also beams can create soaring can provide finish open spaces or embrace materials such as flooring, more intimate areas. The siding, trim, pattern timbers and joinery board stock and timber combine to become accents. We regularly sculpture. But as build custom wood beautiful as a well The Arkitex Studio executed timber frame is, interior and we are fully aware that it exterior doors, is only part of a more cabinets, stairs important whole. It and railings to should define and match or enhance the plan, be complement the structurally sound and timber frame. aesthetically pleasing, work in conjunction with all Ron Balderach & Associates other systems in the project and make sense HOW DO WE BEGIN? economically. In our nearly As you can see, we take ideas and dreams and make them two decades in the trade, into reality. A working relationship with Red Suspenders we have developed Timber Frames means a commitment to excellence and methods and techniques to exceptional craftsmanship. Such a relationship usually make this possible. begins with a visit to our shop in Nacogdoches where Through design you can see our work and meet the fine people who work consultation, we are happy here. You can also visit our website at to put our experience and redsuspenderstf.com and take a virtual tour of our knowledge to work for you. facility. We would also be happy to have one of our 4418 CCounty RRoad 2256 •• NNacogdoches,, TTX 775965 4418 County Road 256 936-5564-99465 •• wwww..redsuspenderstff..com Nacogdoches, TX 75965 representatives visit your office to discuss possibilities 936-5564-99465 with you. Please call our office and let us know how we www.redsuspenderstf.com can assist you in making your design a reality..
Recommended publications
  • Garrett County ADDITION for MILL
    (May 5, 2006) Garrett County ADDITION FOR MILL (2) Jesse Tomlinson was assessed of 80 acres called “Addition for Mill” on the 1804- 1807 tax list, after which time it was sold. See also Tomlinson Mill. AGWAY FEED STORE (3) The Keyser Ridge Creamery was built in 1922 on U.S. 40. It now [1976] houses the Agway feed store operated and owned by William and Robert Oester. From Paul T. Calderwood, “The Keyser Ridge Creamery,” Glades Star, 5 (September 1977): 33. AGWAY INC. (10) This is a large commercial mill built of sheet metal and located on the B. & O. in Oakland [1976]. ALLEGANY FURNACE COMPANY (2) The first furnace recorded in the county was that of Oliphant of Uniontown, Pa., built at Friendsville in 1802, Glades Star, March 25, 1941. However, when the Allegany Furnace Company established the Friendsville Furnace in 1828-29, it was described as the only furnace and only industry in the present Garrett County. It was a charcoal furnace with two forges, built on the north side of Bear Creek, a branch of Yougiogheny River, 0.5 mile east of Friendsville, per RIOM, p. 139. Glades Star, December 1963, p. 260, describes the location as on the left side of Bear Camp Creek near the highway, a mile above Friendsville. The furnace was designed to use the Carbonate ores of the Youghiogheny Coal Basin. Iron had to be hauled to the National Road and on to Baltimore. The furnace closed in 1834 and the forges were removed to the west side of the river a half mile NE of Friendsville, where they operated until 1845; in 1911, the wheel site was visible and one wall of the coal house was standing, RIOM, p.
    [Show full text]
  • Code of Practice for Wood Processing Facilities (Sawmills & Lumberyards)
    CODE OF PRACTICE FOR WOOD PROCESSING FACILITIES (SAWMILLS & LUMBERYARDS) Version 2 January 2012 Guyana Forestry Commission Table of Contents FOREWORD ................................................................................................................................................... 7 1.0 INTRODUCTION ...................................................................................................................................... 8 1.1 Wood Processing................................................................................................................................. 8 1.2 Development of the Code ................................................................................................................... 9 1.3 Scope of the Code ............................................................................................................................... 9 1.4 Objectives of the Code ...................................................................................................................... 10 1.5 Implementation of the Code ............................................................................................................. 10 2.0 PRE-SAWMILLING RECOMMENDATIONS. ............................................................................................. 11 2.1 Market Requirements ....................................................................................................................... 11 2.1.1 General ..........................................................................................................................................
    [Show full text]
  • Wood Properties
    In: Arntzen, Charles J., ed. Encyclopedia of Agricultural Science. Orlando, FL: Academic Press: 549-561. Vol. 4. October 1994. Wood Properties JERROLD E. WINANDY, USDA-Forest Service, Forest Products Laboratory,1Wisconsin Wood Structure woods; term has no reference to the actual hardness Physical Properties of the wood Mechanical Properties Latewood Portion of the annual growth ring that is Factors Affecting Properties of Wood formed after the earlywood formation has ceased; it Properties and Grades of Sawn Lumber is usually denser and mechanically stronger than ear- lywood Lumber Product of the saw and planing mill manu- factured from a log through the process of sawing, Glossary resawing to width, passing lengthwise through a stan- dard planing machine, and crosscutting to length Allowable property Value of a property normally Orthotropic Having unique and independent prop- published for design use; allowable properties are erties in three mutually orthogonal (perpendicular) identified with grade descriptions and standards, and planes of symmetry; 3 special case of anisotropy they reflect the orthotropic structure of wood and Ring-porous woods Group of hardwoods in which anticipated end uses the pores are comparatively large at the beginning of Anisotropic Exhibiting different properties along each annual ring and decrease in size more or less different axes; in general, fibrous materia]s such as abruptly toward the outer portion of the ring, thus wood are anisotropic forming a distinct inner zone of pores, the earlywood, Annual growth ring Layer of wood growth put on and an outer zone with smaller pores, the latewood a tree during a single growing season. In the temperate Softwoods General botanical group of trees that in zone, the annual growth rings of many species (e.
    [Show full text]
  • Centrifugals Planing Mill
    U THE SATURDAY PRESS. Pioneer"Iiine a n rt w . i' a r n ii I i ii 1 1 a ii k it w it i: k t v FROM LIVERPOOL. in nn i i nirrini J-- .. riVr.DOt.I.AflX A YKAR IN AnVANCi: V..' IXS5 1 hdteip AT; yiw nt- - rlpll n frrnn ., In j! Mt.af l'rMgri vg HTaalaUaBrxiC-ki- (milinc I" de.nnailnn vm:'A,rrxrm in.) Villi ()!t I) Saturday "llh.Ptlltar (ll.ftll.'f addlt 1 TUMI U Press. 1nsSr Mi Minn for lh "tslurdav I'mi a hnn Id h aildreaard it KM K II., NO. I!U II. I., .JAN 7, 1882. llffT T In III 1Tl llllli I'IIISn." VOI IIONOIilJIiU, SATURDAY UARY, IW.IOUO NUMBER 71. JHwMMHBB.aKl He mlnlKencM ctf Honolulu. No IB. MVSEaWLaiJssk..aps nn indii'lint'iV tf Ihe .Minister of I'Mniinre ii. w. sr.vi:iiANOi:, WII.IMilt 4,'0. 1'I)Ni:i:h.vd:am Roxlon of lvnrn. jif I Mlaiatla I Ititiixl ulii llnanl linilrrwrllfrn. Hnivnllnti Citlmil k Cniiiiiilaaloii Merrlmnt miii-- i .( II'.ibI ti..l iii.ii Ilnrlfwoll, tlin nilili,iicr " NVtrri," 'I'liey Hilld "Wo eoiiPider oillteles enlli'd IIIVKII'I ' lO'll ll"l' ll"FI"l'tll Cundy Mnnufnctorv find Dnkory A (lie of tlin T aillt airinlaNI , al,ll I N I; nd or.yiH for ll.aa.ll.n ill Uio prurient hlnlo of grnnt exeile t.nmW, 1'Alnti! Olli. nlti lUtt HulMlnfr ly IHlKWhll A II)miii -- f..,, llio Mr 'IVn Kyck, .4 1.
    [Show full text]
  • Fplgtr113.Pdf
    Abstract Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses. Keywords: wood structure, physical properties (wood), mechanical properties (wood), lumber, wood-based composites, plywood, panel products, design, fastenings, wood moisture, drying, gluing, fire resistance, finishing, decay, sandwich construction, preservation, and wood- based products On the cover: (Left to right, top to bottom) 1. Research at the Forest Products Laboratory, Madison, Wisconsin, contributes to maximizing benefits of the Nation’s timber resource. 2. Testing the behavior of wood in fire helps enhance fire safety. 3. The all-wood, 162-m (530-ft ) clear-span Tacoma Dome exemplifies the structural and esthetic potential of wood construction (photo courtesy of Western Wood Structures, Inc., Tualatin, Oregon). 4. Bending tests are commonly used to determine the engineering properties of wood. 5. Engineered wood trusses exemplify research that has led to more efficient use of wood. 6. The Teal River stress-laminated deck bridge is March 1999 located in Sawyer County, Wisconsin. 7. Kiln drying of wood is an important procedure Forest Products Laboratory. 1999. Wood handbook—Wood as an during lumber manufacturing. engineering material. Gen. Tech. Rep. FPL–GTR–113. Madison, WI: 8. Legging adhesive (photo courtesy of Air Products U.S. Department of Agriculture, Forest Service, Forest Products and Chemicals, Inc., Allentown Pennsylvania). Laboratory. 463 p. Adhesive bonding is a critical component in the A limited number of free copies of this publication are available to the performance of many wood products.
    [Show full text]
  • Standard Stock Ponderosa Pine Doors
    National Bureau of Standards book not to be DEC 2 8 1944 laKiiil OSfc; Library. CSl 20-44 Doors, pine (ponderosa) U. S. DEPARTMENT OF COMMERCE JESSE H. JONES, Secretary NATIONAL BUREAU OF STANDARDS LYMAN J. BRIGGS, Director STANDARD STOCK PONDEROSA PINE DOORS COMMERCIAL STANDARD CS120-44 Effective Date for New Production from September 15, 1944 A RECORDED VOLUNTARY STANDARD OF THE TRADE UNITED STATES GOVERNMENT PRINTING OFFICE WASHINGTON ; 1944 For sale by the Superintendent of Documents, U. S. Government Printing Office Washington 25, D. C. - Price 10 cents U. S. Department of Commerce National Bureau of Standards PROMULGATION of COMMERCIAL STANDARD CS120-44 for STANDARD STOCK PONDEROSA PINE DOORS On January 29, 1944, at the instance of the National Door Man- ufacturers Association, a proposed commercial standard for standard stock ponderosa pine doors was submitted to manufacturers, testing laboratories, and distributor and consumer organizations for comment. An adjusted draft was then circulated to the trade for written ac- ceptance. Those concerned have since accepted and approved the standard as shown herein for promulgation by the United States Department of Commerce, through the National Bureau of Standards. This standard is effective for* new production from September 15, 1944. Promulgation recommended. I. J. Fairchild, Chief, Division of Trade Standards. Promulgated. Lyman J. Briggs, Director, National Bureau of Standards. Promulgation approved. Jesse H. Jones, Secretary of Commerce. II STANDARD STOCK PONDEROSA PINE DOORS ^ COMMERCIAL STANDARD CSl 20-44 PURPOSE 1 . The purpose of this commercial standard is to establish standard specifications and sizes for ponderosa pine, standard stock doors to guide producers, distributors, architects, builders, and the public; to provide a uniform basis for guaranteeing compliance through the use of labels or certifications; to avoid delays and misunderstandings; and to effect economies from the producer to the ultimate user through a wider utilization of standard, ponderosa pine doors.
    [Show full text]
  • July 1, 2019 R.C. 2486 Re: Cabinet Works Classification Codes 2816
    New York Compensation Insurance Rating Board 733 Third Avenue New York, NY 10017 Tel: (212) 697‐3535 July 1, 2019 R.C. 2486 Re: Cabinet Works Classification Codes 2816, 2817, and 2818 Effective Date: October 1, 2019 Members of the Rating Board: I write to inform you that the New York State Department of Financial Services (“DFS”) approved amendments to the Rating Board’s New York Workers’ Compensation and Employers’ Liability Manual (“Manual”) which are detailed herein, attached hereto, and are effective on October 1, 2019. Specifically, DFS approved the elimination of classification codes 2816 and 2818 (Cabinet Works – With Power Machinery), and the Rating Board has been directed to combine their experience with classification code 2817 (Cabinet Works – With Power Machinery). All three codes (2816, 2817 and 2818) apply to cabinet manufacturing using power‐driven machinery and will be combined to avoid misclassification and achieve consistency with the classification procedures in other jurisdictions. As of October 1, 2019, code 2817 will be a Not Otherwise Classified (“NOC”) code to specifically allow for the inclusion of various manufactured wood products. The following modified and final versions of pages from the Manual, reflecting the approved amendments are attached for your convenience: (a) Classification Index – C‐10; (b) Classification Section – C‐3, C‐14, and C‐16; (c) Digest Section II – D‐56; (d) Digest Section III – D‐77a; and (e) Digest Section IV – D‐85, D‐86, D‐87, D‐88, D‐89, D‐90, D‐91, D‐92, D‐93, and D‐94. Members of the Rating Board July 1, 2019 Page 2 If you have any questions or concerns, please do not hesitate to contact Mr.
    [Show full text]
  • PWM Style Book Jan 2014.Pdf
    Style Book Revised: January 2014 PW Style Book Revised: Jan 2014 Numbers, Measurements • #400-grit (adj) • 30 years adze (n): a primitive tool for surfacing lumber and Callouts • #400 grit (n) • #0000 steel wool • #1,000 grit stone • 1-pound cut, 2-pound cut etc. aftermarket (n): the market for parts, accessories and repairs • 40-tooth (adj) (for shellac) • thickness x width x length of a product; also, a secondary • On anything dimensional, • $2,800 (not $2800) • 1 horsepower; 1 hp (1-hp market for a product after the use numerals and birds’ feet, router); spell out ‘horsepower’ primary market; an aftermarket • 2" scale even if it’s an approximation on first reference, then can use fence for a table saw, for example • 32" x 48" ‘hp’ abbreviation (this departs from AP style) AIA (abbreviation): American • 4' x 7' 1/4"-20 (machine screw thread; • 4/4 lumber (reads as “four- Institute of Architects • 2x4; 2x4s (Name for quarter lumber”; refers to rough- 1/4" is diameter, 20 is threads per air-conditioner (n); construction-grade lumber, cut lumber measured by quarters inch) air-conditioning (A/C) (n); usually pine, generally used for or an inch; do not set as stacked • 70°F (no space; don’t spell out air-conditioned (adj) wall studs; is not really 2" by 4", fractions) on first ref.) air-dry (v); air-dried (adj): a but an estimate of the size used • mid-1800s • 3D (departure from AP) commonly; do not include inch method of seasoning lumber •30mm, 25 cm marks) which permits the sawn wood, • model 41293 which is usually protected from • 90°
    [Show full text]
  • Machining and Related Characteristics of United States Hardwoods
    Machining and Related Characteristics of United States Hardwoods By E. M. DAVIS, Wood Technologist, Forest Products Laboratory (Maintained at Madison, Wis., in cooperation with the University of Wisconsin) Technical Bulletin No. 1267 U.S. DEPARTMENT OF AGRICULTURE · FOREST SERVICE Washington, D.C. August 1962 For sale by the Superintendent of Documents, U.S. Government Printing Office Washington 25, D.C. - Price 35 cents CONTENTS Page Introduction----------------------------------------------------- 1 Machining properties- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Planing-------------------------------------------------------- 3 Shaping--------------------------------------------------------- 20 Turning------------------------------------------------------ 23 Boring----------------------------------------------------- 26 Mortising--------------------------------------------------- 31 Sanding-------------------------------------------------------- 35 Related properties - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 39 Steam bending- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 39 Nail splitting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 43 Screw splitting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 45 Variation in specific gravity- - - - - - - - - - - - - - - - - - - - 49 Number of annual rings per inch- - - - - - - - - - - - - - - - 53 Cross grain - - - - - -
    [Show full text]
  • Planing Mill Soon Possible
    \ R NEIGHBORHOOD NOTES. Zolienople. Poriersvllle. Oak Hollow Herns. REGISTER'S NOTICES. THE CITIZEN. WE WILL NOT Ft: LEGAL NEWS. A MKRIiY »?«*». , - 'I ? i tiott.-o that Ui* ? ,\. Co VVI" large A lev. Icigli .en oil r. i. \u25a0 rlv. The Greeiau bend has had it thy. W CeohriugA a and sled we..- 1 A | Commissioner' of Fayette county 1.m1.1 ' - i ITWOW lu.ii.isira- went away. .VOTES. The in I we wish i'|i. r «!e.| came and .? o u trret the »f.M. liii: wlml 11 i i ta FRIDAY.FEBRUARY 14.1890. The bustle s 1 l.ri.-k i tn lioii 2-U-O »'«*?-I. ith town hall ! tluriug leighiit Baud 11.111.! t.lr I ' I libioTßc# utre t.». ee have advertised for bid for the erection of '\u25a0 ' I l-< a. I \.»:l t»ft pie* fo Most every mmmer" whole could Le written from \ " -tiled history "ii oil «? new ?A an.l lodge nmiu above, the it. of the Will lfeb.ri.ng, Jr. la (Mill.-. : sou in advance iiiltlil wish ' r '"f »ti»»u jifid idluir&n oil startling tomfoolen a new c.nrt lion e been "? l» S..me the old tax duplicate ?of county. For they -r i:i A Ivm at 3 o'cuxk r. M. tlii. pr> ent building. have also bought ; about town lor a while back. lo ;i«2<i i11..? pleasuie <>l el .ai'l U&). lias population of id <*m. what next pring t>> a ItriTi.KK a aln.ui I Aud so wo wonder instance, that of Centre Twp.
    [Show full text]
  • Steele Cotton Mill Lenoir, Caldwell County, CW0423, Listed 09/18/2017 Nomination by Heather Fearnbach Photographs by Heather Fearnbach, August and September 2016
    NORTH CAROLINA STATE HISTORIC PRESERVATION OFFICE Office of Archives and History Department of Natural and Cultural Resources NATIONAL REGISTER OF HISTORIC PLACES J. M. Bernhardt Planing Mill and Box Factory – Steele Cotton Mill Lenoir, Caldwell County, CW0423, Listed 09/18/2017 Nomination by Heather Fearnbach Photographs by Heather Fearnbach, August and September 2016 East elevation, north section, looking southwest 1896/1903 factory, first floor, southwest section, looking south NPS Form 10-900 OMB No. 10024-0018 (Oct. 1990) United States Department of the Interior National Park Service National Register of Historic Places Registration Form This form is for use in nominating or requesting determinations for individual properties and districts. See instructions in How to Complete the National Register of Historic Places Registration Form (National Register Bulletin 16A). Complete each item by marking “x” in the appropriate box or by entering the information requested. If an item does not apply to the property being documented, enter “N/A” for “not applicable.” For functions, architectural classification, materials, and areas of significance, enter only categories and subcategories from the instructions. Place additional entries and narrative items on continuation sheets (NPS Form 10-900a). Use a typewriter, word processor, or computer, to complete all items. 1. Name of Property historic name J. M. Bernhardt Planing Mill and Box Factory – Steele Cotton Mill other names/site number Hayes Cotton Mill, CW0423 2. Location street & number 1201 Steele Street N/A not for publication city or town Lenoir N/A vicinity state North Carolina code NC county Caldwell code 27 zip code 28645 3. State/Federal Agency Certification As the designated authority under the National Historic Preservation Act, as amended, I hereby certify that this nomination request for determination of eligibility meets the documentation standards for registering properties in the National Register of Historic Places and meets the procedural and professional requirements set for in 36 CFR Part 60.
    [Show full text]
  • The Lumber Industry in Manitoba
    Economic History Theme Study THE LUMBER INDUSTRY IN MANITOBA Karen Nicholson Historic Resources Branch Manitoba Culture, Heritage, Tourism and Sport February 2000 2 TABLE OF CONTENTS I. INTRODUCTION…………………………………………………………………………… 5 II. REGULATION OF THE TIMBER INDUSTRY…………………………………………… 6 III. DIVISIONS OF THE LUMBER INDUSTRY……………………………………………… 9 1. Building Ice Roads…………………………………………………………………….. 9 2. Logging Operations……………………………………………………………………. 9 3. Log Hauling……………………………………………………………………………. 11 4. The River Drive………………………………………………………………………… 12 5. The Saw Mill…………………………………………………………………………… 13 6. The Planing Mill……………………………………………………………………….. 14 7. The Lath Mill ………………………………………………………………………….. 16 8. The Retail Lumber Industry……………………………………………………………. 16 IV. REGIONAL OPERATIONS………………………………………………………………… 19 1. Winnipeg……………………………………………………………………………….. 19 2. Lake Winnipeg…………………………………………………………………………. 21 Fort Alexander Mill……………………………………………………………….. 21 Brown and Rutherford, Point Douglas……………………………………………. 22 Jonasson and Fridriksson Mill, Icelandic River Mill (Riverton)………………… 22 Finnson Mill, Icelandic River…………………………………………………….. 23 Selkirk Mills………………………………………………………………………. 26 3. Eastern Manitoba………………………………………………………………………. 27 Ross Mill, Whitemouth……………………………………………………………. 27 McArthur’s Mill, Lac Du Bonnet…………………………………………………. 28 Sprague Lumber Company………………………………………………………… 28 4. Riding Mountain.………………………………………………………………………. 29 McArthur’s Mill, Birtle……………………………………………………………. 30 Armitage Mill, Minnedosa………………………………………………………… 30 Millwood Mill,
    [Show full text]