RF and Microwave Engineering

Rashtreeya Sikshana Samithi Trust

R.V. College of Engineering (Autonomous Institution affiliated to VTU, Belagavi)

Department of Telecommunication Engineering Master of Technology (M.Tech.) RF and Microwave Engineering

Scheme and Syllabus of Autonomous System w.e.f 2016

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

R.V. College of Engineering, Bengaluru – 59 (Autonomous Institution affiliated to VTU, Belagavi ) Department of Telecommunication Engineering

Vision: Imparting quality education in Electronics and Telecommunication Engineering through focus on fundamentals, research and innovation for sustainable development

Mission: • Provide comprehensive education that prepares students to contribute effectively to the profession and society in the field of Telecommunication.

• Create state-of-the–art infrastructure to integrate a culture of research with a focus on Telecommunication Engineering Education

• Encourage students to be innovators to meet local and global needs with ethical practice.

• Create an environment for faculty to carry out research and contribute in their field of specialization, leading to Center of Excellence with focus on affordable innovation.

• Establish a strong and wide base linkage with industries, R&D organization and academic Institutions.

Program Educational Objectives (PEO)

M. Tech. in RF and Microwave Engineering, graduates will be able to:

PEO 1: Analyze, evaluate, design and solve complex technical problems using modern tools PEO 2: Carry out research and innovation in the core areas like RF Circuit analysis, sub system design and Wireless Communication. PEO 3: Demonstrate the skills required in Defense, Microwave and RF communication sectors PEO 4: Adapt to the technological changes through lifelong learning for global acceptance.

Program Outcomes (PO) M. Tech. in RF and Microwave Engineering graduates will be able to: PO1. Scholarship of Knowledge : Acquire in-depth knowledge of RF and Microwave communication with an ability to evaluate, analyze and Synthesize complex problems.

PO2. Critical Thinking: Analyze complex engineering problems to make intellectual and/or creative advances for conducting research

Scheme and Syllabus – 2016 Admission Batch Page 2 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

PO3. Problem Solving: Conceptualize and solve engineering problems, to arrive at optimal solutions, considering public health and safety, societal and environmental factors.

PO4. Research Skill: Formulate research problem through literature survey, apply appropriate research methodologies to solve and contribute to the development of technological knowledge.

PO5. Usage of modern tools: Learn and apply modern engineering tools to solve complex engineering problems

PO6. Collaborative and Multidisciplinary work: Contribute positively to collaborative- multidisciplinary scientific research, in order to achieve common goals.

PO7. Project Management and Finance: Manage projects efficiently in RF and Microwave disciplines after Consideration of financial factors

PO8. Communication: Communicate with the engineering community regarding complex engineering activities confidently and effectively

PO9. Life-long Learning: Ability to engage in life-long learning independently, to improve knowledge and competency

PO10. Ethical Practices and Social Responsibility: Practice professional code of conduct, ethics of research in profession with an understanding of responsibility to contribute to the community for sustainable development of society.

PO11. Independent and Reflective Learning: Introspect critically the outcomes of one’s actions and make corrective measures subsequently, and learn from mistakes without depending on external feedback.

MASTER OF RF AND MICROWAVE ENGINEERING – Program

Program Specific Criteria (PSC)

Lead Society: Institute of Electrical and Electronics Engineers

1. Curriculum:

The curriculum must include Advanced mathematics applied to telecommunication system design; Engineering topics , including programming, necessary to analyze and design complex electrical and electronic devices, software, and systems containing hardware and software

Scheme and Syllabus – 2016 Admission Batch Page 3 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering components; Communication theory and systems. The curriculum must prepare graduates for design and operation of Telecommunication networks for services such as voice, data, image, and video transport.

2. Faculty

The professional competence of the faculty must be in Applied Mathematics, Engineering, Telecommunication System design and integration.

Program Specific Outcomes (PSO)

Graduates in M. Tech (RF and Microwave Engineering) will be able to:

PSO 1. Analyze, design and implement devices, sub-systems, propagation models for Wired and Wireless communication systems.

PSO 2. Exhibit technical skills necessary to enter careers in design, installation, testing and operation of wireless Communication systems.

Scheme and Syllabus – 2016 Admission Batch Page 4 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

R. V. College of Engineering, Bengaluru – 59. (An Autonomous Institution affiliated to VTU, Belagavi) Department of Telecommunication Engineering

M. Tech. in RF and Microwave Engineering

FIRST SEMESTER Sl. Course Code Course Title BoS CREDIT ALLOCATION Total No Lecture Tutorial Practical Experiential Credits Learning L T P S 1 16 MEM11R Research Methodology IM 3 1 0 0 4 2 16MAT12D Applied Engineering Mathematics MA 4 0 0 0 4 3 16 MDC13/ Advanced Digital Communication TE 4 0 1 0 5 16MRM13 (Theory and Practice) 4 16 MRM14 RF Passive Circuits TE 4 0 0 1 5 5 16 MRM15x Elective -1 TE 4 0 0 0 4 6 16HSS16 Professional Skill Development HSS 0 0 2 0 2 Total 19 1 3 1 24

Elective –1

16 MRM151 Computational Electromagnetic 16 MRM152 Antenna Theory

Scheme and Syllabus – 2016 Admission Batch Page 5 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

R. V. College of Engineering, Bengaluru – 59. (An Autonomous Institution affiliated to VTU, Belagavi) Department of Telecommunication Engineering

M. Tech. in RF and Microwave Engineering

SECOND SEMESTER Sl. Course Code Course Title BoS CREDIT ALLOCATION Total No Lecture Tutorial Practical Experiential Credits Learning L T P S 1 16 MEM21P Project Management IM 3 1 0 0 4 2 16 MRM22 RF Devices and Active Circuits TE 4 0 1 0 5 (Theory and Practice) 3 16 MRM23x Elective-2 TE 4 0 0 0 4 4 16 MRM24x Elective-3 TE 4 0 0 0 4 5 16 MRM25x Elective-4 TE 4 0 0 0 4 6 16 MRM26 Minor Project TE 0 0 5 0 5 Total 19 1 6 0 26

Elective –2 Object Oriented Programming 16 MRM231 Statistical Signal Processing 16 MRM232 Concepts Elective –3 16 MRM241 EMI and EMC 16 MRM242 Software Defined Radio Elective –4 RF Micro Electro 16 MRM251 16 MDC252/16MRM252 Wireless Sensor Networks Mechanical Systems

Scheme and Syllabus – 2016 Admission Batch Page 6 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

R. V. College of Engineering, Bengaluru – 59. (An Autonomous Institution affiliated to VTU, Belagavi) Department of Telecommunication Engineering

M. Tech. in RF and Microwave Engineering

THIRD SEMESTER Sl. Course Code Course Title BoS CREDIT ALLOCATION Total No Lecture Tutorial Practical Experiential Credits Learning L T P S 1 16 MDC31/ Wireless Communication TE 4 0 1 0 5 16MRM31 (Theory and Practice) 2 16 MRM32x Elective -5 TE 4 0 0 0 4 3 16 MRM33x Elective -6 TE 4 0 0 0 4 4 16 MRM34x Elective -7 TE 4 0 0 0 4 5 16 MRM35 Internship/Industrial Training TE 0 0 3 0 3 6 16 MRM36 Technical Seminar TE 0 0 2 0 2 Total 16 0 6 0 22

Elective –5 16 MRM321 Smart Antenna and MIMO 16 MRM322 Advanced Mobile Networks Elective –6 Monolithic Microwave 16 MRM331 16 MDC332/16MRM332 Satellite Navigation Systems Integrated Circuits Elective –7 16 MRM341 Terahertz Communication 16 MDC342/16MRM342 Broadband networks

Scheme and Syllabus – 2016 Admission Batch Page 7 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

R. V. College of Engineering, Bengaluru – 59. (An Autonomous Institution affiliated to VTU, Belagavi) Department of Telecommunication Engineering

M. Tech. in RF and Microwave Engineering

FOURTH SEMESTER Sl. Course Code Course Title BoS CREDIT ALLOCATION Total No Lecture Tutorial Practical Experiential Credits Learning L T P S 1 16 MRM41 Major Project TE 0 0 26 0 26 2 16 MRM42 Seminar TE 0 0 2 0 2 Total 0 0 28 0 28

Scheme and Syllabus – 2016 Admission Batch Page 8 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

I SEMESTER

RESEARCH METHODOLOGY Course Code : 16MEM11R CIE Marks : 100 Hrs/Week : L: T: P: S 3:2:0:0 SEE Marks : 100 Credits : 04 SEE Duration : 3 hours Course Learning Objectives: This course will enable student to: 1. Understand of the underlying principles of quantitative and qualitative research 2. Perform the gap analysis and identify the overall process of designing a research study. 3. Choose the most appropriate research methodology to address a particular research problem 4. Explain a range of quantitative and qualitative approaches to analyze data and suggest possible solutions. Unit – I 07 Hrs Overview of Research Meaning of Research, Types of Research, Research and Scientific Method, Defining the Research Problem, Research Design, Different Research Designs. Unit – II 07 Hrs Methods of Data Collection Collection of Primary Data, Observation Method, Interview Method, Collection of Data through Questionnaires, Collection of Data through Schedules, Collection of Secondary Data, Selection of Appropriate Method for Data Collection. Unit – III 08Hrs Sampling Methods Sampling process, Non-probability sampling, probability sampling: simple random sampling, stratified sampling, cluster sampling systematic random sampling, Determination of sample size, simple numerical problems. Unit – IV 07Hrs Processing and analysis of Data Processing Operations, Types of Analysis, Statistics in Research, Measures of: Central Tendency, Dispersion, Asymmetry and Relationship, correlation and regression, Testing of Hypotheses for single sampling: Parametric (t, z and F) Chi Square, ANOVA, and nonparametric tests, numerical problems. Unit-V 07Hrs Essentials of Report writing and Ethical issues : Significance of Report Writing, Different Steps in Writing Report, Layout of the Research Report, Precautions for Writing Research Reports.

Scheme and Syllabus – 2016 Admission Batch Page 9 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Syllabus includes 12 hours of tutorials in which: • Faculty is expected to discuss research methodology for specializations under consideration. • Numerical problems on statistical analysis as required for the domains in which students are studying must be discussed. • Statistical analysis using MINITAB/ MatLab and such other software’s can be introduced. Course Outcomes: After going through this course the student will be able to CO1: Explain various principles and concepts of research methodology. CO2: Apply appropriate method of data collection and analyze using statistical methods. CO3: Analyze research outputs in a structured manner and prepare report as per the technical and ethical standards. CO4: Formulate research methodology for a given engineering and management problem situation. Reference Books: 1. C.R. Kothari, “Research Methodology Methods and techniques”, New Age International, 2004, ISBN: 9788122415223 2. K.N. Krishnaswami, A. I Sivakumar, and M. Mathirajan, Management Research Methodology, Pearson Education India, 2009, ISBN:9788177585636 3. R.I. Levin, and D.S. Rubin, “Statistics for Management”, 7th Edition, Pearson Education: New Delhi, ISBN-13: 978-8177585841

Scheme of Continuous Internal Evaluation (CIE) CIE will consist of TWO Tests, TWO Quizzes and ONE assignment. The test will be for 30 marks each and the quiz for 10 marks each. The assignment will be for 20 marks. The total marks for CIE will be 100 marks.

Scheme of Semester End Examination (SEE) The question paper will have FIVE questions with internal choice from each unit. Each question will carry 20 marks. Student will have to answer one question from each unit. The total marks for SEE (Theory) will be 100 marks.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 M ------M ------H --- H ----- CO2 --- L H H M M L L ---- M L CO3 L M M M H M L M ------M CO4 H H H H ---- L L M H --- H

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO) PSO1 PSO2 CO1 L L CO2 L M CO3 M H CO4 M H

Scheme and Syllabus – 2016 Admission Batch Page 10 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

APPLIED ENGINEERING MATHEMATICS Course Code : 16MAT12D CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand the concepts of discrete and continuous probability, independence of events, conditional probability and be able to apply these concepts to engineering applications. 2. Understand mathematical descriptions of random variables including probability mass functions (PMFs), cumulative distribution functions (CDFs), probability distribution functions (PDFs), conditional distribution, conditional mass and density functions. 3. Apply fundamental concepts of linear algebra including matrix algebra, solutions of linear systems, determinants, vector spaces, orthogonality, eigenvalues and eigenvectors to solve problems based on the these concepts. 4. Understand fundamental qualitative and quantitative methods used in analysis of differential and difference equations, associated transforms and applications. Unit – I 10Hrs Fundamentals of Probability Theory Definitions, scope and history; Axioms of Probability, Assigning Probabilities; Joint and Conditional Probabilities, Independence; Baye’s Theorem and applications. Random Variables, Distributions and Density Functions Definition of random variables, continuous and discrete random variables, cumulative distribution function for discrete and continuous random variables, probability mass function, probability density functions and properties, Some special distributions, Uniform, Exponential, Laplace, Gaussian and Rayleigh distributions, Binomial, and Poisson distribution. Unit – II 10Hrs Operations on random variables Expectation, moments and central moments of a random variable; Characteristic Functions, Probability generating and Moment generating functions. Joint PDF, Joint CDF, Joint PMF; conditional expectation, Joint moments; covariance and correlation; independent, uncorrelated and orthogonal random variables; Jointly Gaussian random variables. Multiple Random variables Joint and Conditional PMF’s, CDF’s and PDF’s; Central limit theorem; Gaussian random variables in multiple dimensions; mean vector, covariance matrix and properties Unit – III 10Hrs Matrices and Gaussian Elimination Geometry of Linear Equations, Matrix multiplication, Inverses and Transposes, System of equations by Gauss Seidel method, Rank of a Matrix, Special matrices and applications. Determinants, Eigenvalues and Eigen Vectors Introduction, Properties of the Determinants and Applications, Diagonalization of a Matrix, Computation of Eigen values and Eigen vector. Unit – IV 10Hrs

Scheme and Syllabus – 2016 Admission Batch Page 11 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Vector Spaces Vector Spaces and Subspaces, Linear Independence, Basis and dimension, Four fundamental Subspaces, Linear Transformations. Orthogonality Orthogonal Vectors and Subspaces, Projections and Least squares, Orthogonal Bases and Gram- Schmidt orthogonalization, Rank-Nullity theorem. Unit – V 10Hrs Partial Differential Equation Linear partial differential equation with constant coefficients of 2 nd order and their classification, illustrative examples. Method of Separation of variable for solving PDE, Simple problems, Numerical solutions of partial differential equations, heat equation, wave equation, Poisson and Laplace equation. Expected Course Outcomes: After going through this course the student will be able to: CO1: Demonstrate the understanding of fundamentals of theory of probability and random variables, matrix theory and partial differential equations. CO2: Solve problems on probability distributions, multiple random variables, matrix analysis, standard partial differential equations. CO3: Apply acquired knowledge to find moments, rank and diagonalization of matrix, verify rank nullity theorem, numerical solution of Laplace and Poisson equations. CO4: Estimate Cumulative Distribution functions, Probability generating functions, Orthogonality of vector spaces, applications of Partial differential equations using both analytical and numerical methods and apply all these concepts Telecommunication Engineering. Reference Books: Scott. L. Miller and Donald. G. Childers, “Probability and Random Processes: With 1. Applications to Signal Processing and Communications”, Elsevier Acad. Press, 2 nd Edition, 2012. th 2. Gilbert Strang, “Linear Algebra and its Applications”, Cengage Learning, 4 Edition, 2006. 3. Nakhle H. Asmar, “Partial Differential Equations and Boundary Value Problems with Fourier Series”, Pearson Education, 2nd Edition, 2005.

Scheme of Continuous Internal Evaluation (CIE) for Theory CIE will consist of TWO Tests, TWO Quizzes and ONE assignment. The test will be for 30 marks each and the quiz for 10 marks each. The assignment will be for 20 marks. The total marks for CIE (Theory) will be 100 marks.

Scheme of Semester End Examination (SEE) for Theory The question paper will have FIVE questions with internal choice from each unit. Each question will carry 20 marks. Student will have to answer one question from each unit. The total marks for SEE (Theory) will be 100 marks.

Scheme and Syllabus – 2016 Admission Batch Page 12 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H H H M L L ------CO2 H H H H H L ------CO3 H H H H H L ------CO4 H H H H H L ------

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H -- CO2 H -- CO3 H -- CO4 H --

Scheme and Syllabus – 2016 Admission Batch Page 13 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

ADVANCED DIGITAL COMMUNICATION (Theory and Practice) Course Code : 16MDC13/16MRM13 CIE Marks : 100+50 Hrs/Week : L:T:P:S 4:0:2:0 SEE Marks : 100+50 Credits : 5 SEE Duration : 3+3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Analyze the properties of basic Modulation techniques and apply them in Digital Communication 2. Apply the different types of coding techniques 3. Design the optimum receiver for channels with ISI and AWGN. 4. Develop the different types of equalizer for various applications. 5. Design different types of spread Spectrum systems. Unit – I 10Hrs Digital Modulation Techniques: Digital modulation formats, Coherent binary modulation techniques, Coherent Quadrature – modulation techniques, No-coherent binary modulation techniques, Comparison of binary and quaternary modulation techniques, M-ray modulation techniques, Power spectra, Bandwidth efficiency, M-array modulation formats viewed in the light of the channel capacity theorem, Effect of inter symbol interference, Bit verses symbol error probabilities, Synchronization, Applications. Unit – II 10Hrs Coding Techniques: Convolutional encoding, Convolutional encoder representation, Formulation of the convolutional decoding problem, Properties of convolutional codes: Distance property of convolutional codes, Systematic and nonsystematic convolutional codes, Performance Bounds for Convolutional codes, Coding gain, Other convolutional decoding algorithms, Sequential decoding, Feedback decoding, Turbo codes.

Unit – III 10Hrs Linear and Adaptive Equalization: Linear equalization, Decision -feedback equalization, Reduced complexity ML detectors, Iterative equalization and decoding - Turbo equalization. Adaptive linear equalizer, adaptive decision feedback equalizer, Recursive least square algorithms for adaptive equalization. Unit – IV 10Hrs

Spread Spectrum Signals for Digital Communication: Model of spread spectrum digital communication system, Direct sequence spread spectrum signals, Frequency hopped spread spectrum signals, CDMA, Time hopping SS, Synchronization of SS systems.

Unit – V 10Hrs

Digital Communication Through Fading Multipath Channels: Characterization of fading multipath channels, The effect of signal characteristics on the choice of a channel model, Frequency nonselective, Slowly fading channel, Diversity techniques for fading multipath channels, Digital signals over a frequency selective, Slowly fading channel.

Scheme and Syllabus – 2016 Admission Batch Page 14 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Unit – VI (Lab Component) The students are expected to design, use modern tools to develop experiments to study the performance and infer changes required in their design for: 1. MASK, MFSK, MPSK, QPSK, MSK, GMSK and M-arry modulation techniques. Students are expected to apply Convolution coding, Turbo codes and LDPC. Linear Equalizers and adaptive equalizers. 2. Study the performance of Spread spectrum techniques, multipath diversity and Multicarrier Modulation techniques. Expected Course Outcomes: After going through this course the student will be able to: CO1: Explain different modulation & coding techniques, spread spectrum systems and channel behaviors CO2: Analyze modulation, equalization, diversity and coding techniques for communication systems CO3: Compare performance of different types of fading channels and other subsystems CO4: Design a digital communication system for optimum performance. Reference Books: Simon Haykin, “Digital Communication Systems”, Illustrated Reprint, Wiley, 2013, 1. ISBN: 0471647357, 9780471647355. Bernard Sklar, “Digital Communications - Fundamentals and Applications”, Pearson 2. Education (Asia) Pvt. Ltd, 2nd Edition, 2014, ISBN: 1292026065, 9781292026060. 3. John G. Proakis, “Digital Communications”, McGraw Hill, 5th Edition, 2008 4. Andrea Goldsmith, “Wireless Communications”, Cambridge University Press, 2005

Scheme of Continuous Internal Evaluation (CIE) for Practical CIE for the practical courses will be based on the performance of the student in the laboratory, every week. The laboratory records will be evaluated for 40 marks. One test will be conducted for 10 marks. The total marks for CIE (Practical) will be for 50 marks.

Scheme of Semester End Examination (SEE) for Practical SEE for the practical courses will be based on conducting the experiments and proper results for 40 marks and 10 marks for viva-voce. The total marks for SEE (Practical) will be 50 marks.

Scheme and Syllabus – 2016 Admission Batch Page 15 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 -- -- L ------CO2 H -- H -- H ------CO3 -- -- H -- M ------M -- CO4 M M H -- M ------L --

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H L CO2 H L CO3 H L CO4 H M

Scheme and Syllabus – 2016 Admission Batch Page 16 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

RF PASSIVE CIRCUITS Course Code : 16MRM14 CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:4 SEE Marks : 100 Credits : 5 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand the basics of RF passive components and circuits 2. Analyze the RF circuits using S-parameters, Signal flow graphs and smith charts. 3. Design RF circuits using EDA tools. 4. Evaluate the performance of designed RF circuits Unit – I 10Hrs Introduction : Radio frequency and Microwave circuit applications, Radio frequency waves, RF and Microwave circuit design considerations, Introduction to component basics, Microstrip line, Formulation and properties of S-parameters, Signal Flow graphs, Smith chart Concepts, Types

Unit – II 10Hrs Applications of Smith chart: Distributed circuits– Transmission lines, Microstrip lines, Lumped element circuits– RC, RL, RLC circuits, Noise, gain and Stability analysis Unit – III 10Hrs Impedance Matching networks: Goal of impedance matching, Components for matching, Design of Matching Networks - Matching network design using Lumped elements- RC, RL, RLC circuits, Design of Matching Networks using Distributed Elements- Transmission lines, Microstrip lines, Stubs Unit – IV 10Hrs Couplers and Power dividers - Basic properties, Types, Power combining efficiency, Wilkinson Power divider- equal and unequal types, 90° Hybrids, Branch line couplers, N-way combiners, Corporate structures, Spatial combining, Phase shifters – Types, Transmission line type, Reflection types phase shifters . Unit – V 10Hrs RF Resonators and Filter s - Basic Resonator types, transmission line resonators, Resonant waveguide cavities, Excitation of resonators, RF Filters : Basic filter configurations, Special Filter Realizations, Filter Implementation, Coupled Filter Unit – VI (Self Study Component) Topics on latest/ emerging technology will be assigned. Students are required to read white papers, publications, patients, and prepare a report, give a seminar on the study undertaken. Expected Course Outcomes: After going through this course the student will be able to: CO1: Apply S-parameters signal flow graphs and Smith chart for design of passive circuits CO2: Analyze the performance parameters of RF passive components CO3: Design RF passive circuit for communication applications CO4: Evaluate the performance of RF passive circuits using EDA tools

Scheme and Syllabus – 2016 Admission Batch Page 17 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Reference Books: 1. Mathew M. Radmanesh, “Radio Frequency and Microwave Electronics”, Pearson Education Asia, 2001. 2. Reinhold Ludwig, Pavel Bretchko, "RF circuit design, theory and applications", Pearson Asia Education, 2nd Edition, 2012. 3. D. Pozar, "Microwave Engineering", John Wiley & Sons, New York, 2005. 4. Inder J Bahl, “ Fundamentals of RF and Microwave Transistor Amplifiers”, John Wiley & sons Inc, 2009

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H L -- L L ------L -- -- CO2 H L -- -- M ------L -- -- CO3 H H -- M H ------L -- -- CO4 H H -- M H ------L -- --

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H M CO2 H M CO3 H H CO4 H H

Scheme and Syllabus – 2016 Admission Batch Page 18 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

COMPUTATIONAL ELECTROMAGNETICS Course Code : 16MRM151 CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand the propagation theory and boundary conditions 2. Apply partial differential equations for analysis of antenna performance. 3. Use computational methods to solve the Integro-differential equations. 4. Understand the concept of FEM, FDTD and MoM. Unit – I 10Hrs Electrostatic Fields, Magneto static fields, Maxwell’s Equations, boundary conditions, wave equations, time varying potentials, Classification of EM problems- classification of Solution regions, differential equations, and boundary conditions, superposition principle and uniqueness theorem. Unit – II 10Hrs Analytical Methods: Introduction, Separation of variables, separation of variables in rectangular coordinates – Laplace and wave equation, separation of variables in cylindrical coordinates – Laplace and wave equation Unit – III 10Hrs Greens Function and Moment method: Integral Equation method, Electrostatic charge distribution, Finite diameter wires, pocklington’s integral equation. Greens functions in engineering- circuit theory, Mechanics, Sturm- Liouville Problems, Greens function in closed, series and integral form, two dimensional greens function in rectangular form Unit – IV 10Hrs Finite Element Method: Introduction, Solution of Laplace equation, Solution of Poisson’s equation, Solutions of Wave equation. Unit – V 10Hrs Finite Difference Schemes, Finite differencing of Parabolic PDE, Hyperbolic PDE, Elliptic PDEs, Yee’s Finite Differencing, Accuracy and Stability, Programming Aspects. Expected Course Outcomes: After going through this course the student will be able to: CO1: Explain the fundamental principles of propagation theory, different analytical methods for performance evaluation. CO2: Classify and Prioritize different CEM techniques based on the applications. CO3: Compute electric field and magnetic field for simple linear structure using analytical and computational techniques. CO4: Apply residual calculus and other methods for analyzing various computational techniques. Reference Books: 1. M.N.O Sadiku, “Numerical Techniques in Electromagnetic”, CRC Press, 2 nd Edition, 2001 Constantine A Balanis “Advanced Engineering Electromagnetic”, John Wiley & sons 2 nd 2. Edition, 2012. 3. Nathan Ida, “Engineering Electromagnetic”, Springer, 2 nd Edition, 2007.

Scheme and Syllabus – 2016 Admission Batch Page 19 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 M L ------CO2 L L ------CO3 H H - M ------L -- -- CO4 M M - H ------L -- --

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 - - CO2 - - CO3 L M CO4 L M

Scheme and Syllabus – 2016 Admission Batch Page 20 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

ANTENNA THEORY Course Code : 16MRM152 CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand basic terminology associated with antennas 2. Design and apply antennas arrays for various applications 3. Design and analyze Microstrip patch antennas 4. Model Antenna structure using CEM techniques. Unit – I 10Hrs Introduction: Review of Radiation mechanism, Solution of Maxwell’s Equations for Radiation Problems, Antenna parameters, Antenna types, Dipole antennas – radiation mechanisms, Field equations, types, Microstrip Patch antennas – radiation mechanisms, Design equations, types Unit – II 12Hrs Broad band and Aperture antennas: Helical antennas, Spiral antennas, Log periodic antennas, Horn and Reflector antennas , Applications Unit – III 12Hrs Antenna arrays – Array factor, Excitation, Mutual coupling, Gain and Directivity, Multidimensional arrays, Phased Array Antenna and Switched array antennas - Feed networks, Power Pattern, Beam Steering, Degree of Freedom, Optimal Antenna, Adaptive Antenna, Smart Antenna , Microstrip Array - feeding methods, Mutual coupling Unit – IV 08Hrs Antenna Synthesis: Formulation of the synthesis problem, synthesis principles, Line sources shaped beam synthesis — Fourier Series, Woodward — Lawson sampling method, Linear array shaped beam synthesis methods — Fourier Series, Woodward — Lawson sampling method, Comparison of shaped beam synthesis methods, Low side lobe narrow main beam synthesis methods - Dolph Chebyshev linear array, Taylor line source method Unit – V 08Hrs Antenna Measurements: Reciprocity and Antenna measurements, Pattern measurements and Ranges, Gain measurements, Polarization measurements, Field Intensity Measurements, Directivity, Impedance, Radiation Efficiency, Current Measurements. Expected Course Outcomes: After going through this course the student will be able to: CO1: Explain different parameters of antenna and antenna systems CO2: Apply knowledge gained on modeling and performance analysis of various antenna types. CO3: Design, synthesize and analyze the types of antennas. CO4: Model and Compute the radiation characteristics and other performance parameters

Scheme and Syllabus – 2016 Admission Batch Page 21 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Reference Books: Stutzman and Thiele, “Antenna Theory and Design”, John Wiley and Sons Inc., 2nd Edition, 1. 2013. 2. C. A. Balanis: “Antenna Theory Analysis and Design”, John Wiley, 2 nd Edition, 2004. John D Kraus, Ronald J Marhefka and Ahmad S Khan, “Antennas and Wave Propagation”, 3. Tata McGraw Hill, 4 th Edition 2010.

Scheme of Continuous Internal Evaluation (CIE) CIE will consist of TWO Tests, TWO Quizzes and ONE assignment. The test will be for 30 marks each and the quiz for 10 marks each. The self-study will be for 20 marks. The total marks for CIE (Theory) will be 100 marks.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H H H M L ------CO2 H H H H H L ------CO3 H H H H H L ------CO4 H H H H H L ------

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 L L CO2 H M CO3 H M CO4 M M

Scheme and Syllabus – 2016 Admission Batch Page 22 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

PROFESSIONAL SKILL DEVELOPMENT Course Code : 16HSS16 CIE Marks : 50 Hrs/Week : L:T:P:S 0:0:4:0 Credits : 02 Course Learning Objectives (CLO): This course will enable student to: 1. Understand the importance of verbal and written communication 2. Improve qualitative and quantitative problem solving skills 3. Apply critical and logical think process to specific problems 4. Manage stress by applying stress management skills Unit - I 5 Hrs Communication Skills: Basics of Communication, Personal Skills & Presentation Skills, Attitudinal Development, Self Confidence, SWOC analysis . Resume Writing: Understanding the basic essentials for a resume, Resume writing tips Guidelines for better presentation of facts. Unit - II 6 Hrs Quantitative Aptitude and Data Analysis: Number Systems, Math Vocabulary, fraction decimals, digit places etc. Reasoning and Logical Aptitude, - Introduction to puzzle and games organizing information, parts of an argument, common flaws, arguments and assumptions. Verbal Analogies – introduction to different question types – analogies, sentence completions, sentence corrections, antonyms/synonyms, vocabulary building etc. Reading Comprehension, Problem Solving Unit - III 4 Hrs Interview Skills: Questions asked & how to handle them, Body language in interview, Etiquette, Dress code in interview, Behavioral and technical interviews, Mock interviews - Mock interviews with different Panels. Practice on Stress Interviews, Technical Interviews, General HR interviews

Unit - IV 5 Hrs Interpersonal and Managerial Skills : Optimal co-existence, cultural sensitivity, gender sensitivity; capability and maturity model, decision making ability and analysis for brain storming; Group discussion and presentation skills; Unit - V 4 Hrs Motivation and Stress Management: Self motivation, group motivation, leadership ability Stress clauses and stress busters to handle stress and de-stress; professional ethics, values to be practiced, standards and codes to be adopted as professional engineers in the society for various projects . Note: The respective departments should discuss case studies and standards pertaining to their domain Expected Course Outcomes: After going through this course the student will be able to: CO1: Develop professional skill to suit the industry requirement. CO2: Analyze problems using quantitative and reasoning skills CO3: Develop leadership and interpersonal working skills. CO4: Demonstrate verbal communication skills with appropriate body language.

Scheme and Syllabus – 2016 Admission Batch Page 23 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

References 1. Stephen R Covey, “The 7 Habits of Highly Effective People”, Free Press, 2004 Edition, ISBN: 0743272455 2. Dale Carnegie, “How to win friends and influence people”, General Press, 1 st Edition, 2016, ISBN: 9789380914787 3. Kerry Patterson, Joseph Grenny, Ron Mcmillan, “Crucial Conversation: Tools for Talking When Stakes are High”, McGraw-Hill Publication, 2012 Edition, ISBN: 9780071772204 4. Ethnus, “Aptimithra: Best Aptitude Book”, Tata McGraw Hill, 2014 Edition, ISBN: 9781259058738

Scheme of Continuous Internal Examination (CIE)

Evaluation will be carried out in TWO Phases.

Phase Activity Weightage I After 5 weeks - Unit 1, 2 & Part of Unit 3 50% II After 10 weeks – Unit 3, 4, 5 50%

CIE Evaluation shall be done with weightage as follows:

Writing skills 10% Logical Thinking 25% Verbal Communication & Body Language 35% Leadership, Interpersonal and Stress Bursting Skills 30%

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H --- L ------H ---- H H H M CO2 H M H ------M H M CO3 ------L ------H --- H H H H CO4 ------H ------H L H H H H

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO) PSO1 PSO2 CO1 L L CO2 L M CO3 M H CO4 M H

Scheme and Syllabus – 2016 Admission Batch Page 24 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

II SEMESTER

PROJECT MANAGEMENT Course Code : 16MEM22P CIE Marks : 100 Hrs/Week : L: T: P: S 3:2:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 hrs Course Learning Objectives: This course will enable student to: 1. Understand the principles and components of project management. 2. Appreciate the integrated approach to managing projects. 3. Elaborate the processes of managing project cost and project procurements. 4. Apply the project management tools and techniques. Unit – I 10 Hrs Introduction: Project, Project management, relationships among portfolio management, program management, project management, and organizational project management, relationship between project management, operations management and organizational strategy, business value, role of the project manager, project management body of knowledge. Unit – II 10Hrs Generation and Screening of Project Ideas: Generation of ideas, monitoring the environment, corporate appraisal, scouting for project ideas, preliminary screening, project rating index, sources of positive net present value. Project Scope Management: Project scope management, collect requirements define scope, create WBS, validate scope, control scope. Organizational influences & Project life cycle: Organizational influences on project management, project state holders & governance, project team, project life cycle. Unit – III 10Hrs Project Integration Management: Develop project charter, develop project management plan, direct & manage project work, monitor & control project work, perform integrated change control, close project or phase. Project Quality management: Plan quality management, perform quality assurance, control quality. Unit – IV 8Hrs Project Risk Management: Plan risk management, identify risks, perform qualitative risk analysis, perform quantitative risk analysis, plan risk resources, control risk. Project Scheduling: Project implementation scheduling, Effective time management, Different scheduling techniques, Resources allocation method, PLM concepts. Unit-V 10Hrs Tools & Techniques of Project Management : Bar (GANTT) chart, bar chart for combined activities, logic diagrams and networks, Project evaluation and review Techniques (PERT) Planning, Computerized project management

Syllabus includes tutorials for one hour per week: • Case discussions on project management • Numerical problems on PERT & CPM • Computerized project management exercises using M S Project Software

Scheme and Syllabus – 2016 Admission Batch Page 25 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Course Outcomes: After going through this course the student will be able to: CO1: Explain the process of project management and its application in delivering successful projects.. CO2: Illustrate project management process groups for various project / functional applications. CO3: Appraise various knowledge areas in the project management framework. CO4: Develop project plans and apply techniques to monitor, review and evaluate progress for different types of projects. Reference Books: 1. “A Guide to the Project Management Body of Knowledge (PMBOK Guide)”, Project Management Institute Inc., 5 th Edition, 2013, ISBN: 978-1-935589-67-9 2. Harold Kerzner, “Project Management A System approach to Planning Scheduling & Controlling”, John Wiley & Sons Inc., 11 th Edition, 2013, ISBN 978-1-118-02227-6. 3. Prasanna Chandra, “Project Planning Analysis Selection Financing Implementation & Review”, Tata McGraw Hill Publication, 7 th Edition, 2010, ISBN 0-07-007793-2. 4. Rory Burke, “Project Management – Planning and Controlling Techniques”, John Wiley & Sons, 4 th Edition, 2004, ISBN: 9812-53-121-1

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H M M ---- M H H H ---- H ---- CO2 --- M ------M H H H L H ---- CO3 --- M H --- M H H H H H M CO4 M H M L H H H H ---- H H

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO) PSO1 PSO2 CO1 H L CO2 M M CO3 M H CO4 M H

Scheme and Syllabus – 2016 Admission Batch Page 26 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

RF DEVICES AND ACTIVE CIRCUIT (Theory and Practice) Course Code : 16MRM21 CIE Marks : 100+50 Hrs/Week : L:T:P:S 4:0:2:0 SEE Marks : 100+50 Credits : 5 SEE Duration : 3 +3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Explain the design considerations for RF active circuits 2. Model and analyze the characteristics of RF diodes and transistors 3. Design RF active circuits for given specifications 4. Evaluate the Performance of RF active circuits through EDA tools Unit – I 10Hrs Active RF Components: Semiconductor properties, RF diodes- PIN, Schotky, Varactor, Gunn diode, applications of diodes- switch, modulator, attenuator, phase shifter, detector BJTs, FET,s, MOSFETS, MESFETS, HEMTs, HBT, Device Models, Device Characterization, Device technologies. Unit – II 10Hrs Microwave Amplifier parameters: Bandwidth, Power gain, input and output VSWR, Inter modulation distortion, two tone measurements technique, Harmonic power, Power added Efficiency, Peak to Average Ratio, Noise Characterization, Dynamic Range, Multistage amplifier characteristics, Stability and gain analysis. Amplifier types. Unit – III 10Hrs RF Amplifiers: BJT and FET Biasing, Impedance matching, Small Signal Amplifier Design, , Large signal amplifier design, Multistage amplifier design. Unit – IV 10Hrs

Mixers: Mixer characteristics: Image frequency, conversion loss, noise figure; Devices for mixers: p-n junctions, Schottky barrier diode, FETs; Diode mixers: Small-signal characteristics of diode, single-ended mixer, large-signal model, switching model; FET Mixers: Single-ended mixer, other FET mixers; Balanced mixers; Image reject mixers

Unit – V 10Hrs Oscillators and Frequency Synthesizers: General analysis of RF oscillators, transistor oscillators, voltage-controlled oscillators, dielectric resonator oscillators, frequency synthesis methods, analysis of first and second order phase-locked loop, oscillator noise and its effect on receiver performance Unit – VI (Lab Component) Using ADS tool design and analyze the performance of the following: LNA, Mixer, Synthesizer and RF amplifier. Expected Course Outcomes: After going through this course the student will be able to: CO1: Explain the performance requirements of RF active circuits CO2: Model and analyze performance RF devices and circuits. CO3: Design RF active circuits for given specifications CO4: Evaluate the Performance of RF active circuits through EDA tools

Scheme and Syllabus – 2016 Admission Batch Page 27 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Reference Books:

1. nd Christopher Bowick, “RF Circuit Design”, Elsevier, 2 Edition, 2008.

2. Bahl I and Bhartia P, “Microwave Solid State Circuit Design”, John Wiley & Sons, 2nd Edition, 2003 3. Chang K, Bahl I and Nair V, “RF and Microwave Circuit and Component Design for Wireless Systems”, Wiley Inter science. 2002 4. Inder J Bahl, “ Fundamentals of RF and Microwave Transistor Amplifiers”, John Wiley & Sons Inc, 2009

Scheme of Continuous Internal Evaluation (CIE) for Practical CIE for the practical courses will be based on the performance of the student in the laboratory,every week. The laboratory records will be evaluated for 40 marks. One test will be conducted for 10 marks. The total marks for CIE (Practical) will be for 50 marks.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H L -- L ------L -- -- CO2 H L -- M H ------L -- -- CO3 H H -- H H ------L -- -- CO4 H H -- H H ------L -- --

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H M CO2 H M CO3 H H CO4 H H

Scheme and Syllabus – 2016 Admission Batch Page 28 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

STATISTICAL SIGNAL PROCESSING Course Code : 16MRM231 CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand design concepts and realization of Digital Filters. 2. Understand the need of sampling rate conversion and its application to Multirate signal processing techniques. 3. Design Adaptive filters, linear prediction and optimum linear filters 4. Estimate Power spectrum requirement based on Eigen decomposition based methods, MUSIC and ESPRIT. Unit – I 10Hrs Design of Digital Filters: General Considerations, Design of FIR filters, Design of IIR filters from analog Filters, Frequency Transformation Unit – II 10Hrs Random processes: Random variables, random processes, white noise, filtering random processes, spectral factorization, ARMA, AR and MA processes. Signal Modeling: Least squares method, Padé approximation, Prony's method, finite data records, stochastic models, Levinson-Durbin recursion; Schur recursion; Levinson recursion. Unit – III 10Hrs Spectrum Estimation: Nonparametric methods, minimum-variance spectrum estimation, maximum entropy method, parametric methods, frequency estimation, principal components spectrum estimation Unit – IV 10Hrs Optimal and Adaptive Filtering: FIR and IIR Wiener filters, Discrete Kalman filter, FIR Adaptive filters: Steepest descent, LMS, LMS-based algorithms, adaptive recursive filters, RLS algorithm. Unit – V 10Hrs Array Processing: Array fundamentals, beam-forming, optimum array processing, performance considerations, adaptive beam-forming, linearly constrained minimum-variance beam-formers, side-lobe cancellers, space-time adaptive processing. Expected Course Outcomes: After going through this course the student will be able to: CO1: Analyze and apply signal processing techniques to design of FIR and IIR filters. CO2: Evaluate various computation and implementation concepts of signal processing for variable sampling rates. CO3: Develop models algorithms for random process, spectrum estimation and filter for various applications. CO4: Design and develop adaptive, linear prediction and optimum linear filters and algorithms. Reference Books: 1. Andrea Goldsmith, “Wireless Communications”, Cambridge University Press, 2005 2. John G. Proakis, “Digital Communications”, McGraw Hill, 5th Edition, 2008 Bernard Sklar, “Digital Communications - Fundamentals and Applications”, Pearson 3. Education (Asia) Ptv. Ltd, 2nd Edition, 2014, ISBN: 1292026065, 9781292026060. Simon Haykin, “Digital Communication Systems”, Illustrated Reprint, Wiley, 2013,ISBN: 4. 0471647357, 9780471647355

Scheme and Syllabus – 2016 Admission Batch Page 29 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 L M H L L H -- L M M -- CO2 H H H M M H -- L M M -- CO3 H H H M M H -- L M M -- CO4 H H H M M H -- L M M --

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 L L CO2 M L CO3 M L CO4 H M

Scheme and Syllabus – 2016 Admission Batch Page 30 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

OBJECT ORIENTED PROGRAMMING CONCEPTS Course Code : 16MRM232 CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand and Analyze the role of Object Oriented programming approach in design and development of software systems 2. Create classes, instances & Inner classes in Java, Aplet class, Servlets and its applications 3. Apply oops concepts and java programming knowledge to design software applications. 4. Design and implement elementary Data Structures such as arrays, lists, Stacks, Queues, trees and graphs using C++ and Java Unit – I 10Hrs Overview of C++ Principles of object-objective Programming, Tokens, Expressions and control structures, Classes and Objects, functions in C++, Destructors and constructor. Unit – II 10Hrs Features and Concepts of C++ Operator Overloading and Type Conversions, Inheritance: Extending Classes, Pointers, Virtual functions and polymorphism, Exception handling, Templates. Unit – III 10Hrs Introduction to Java: Introduction, Data types, variables, and arrays, operators, control statements, Introducing classes, a closer look at methods and classes, inheritance, packages and interfaces. Unit – IV 10Hrs Features and Concepts of JAVA Java Classes, Exception handling, Multithreaded programming, enumerations, Introduction to Java GUI, The applet class, Introducing the AWT, A Tour of Swing Unit – V 10Hrs Data Structures and Applications Linear lists, Linked list, Arrays and Matrices, Stacks, Queues, Trees and Graphs. Expected Course Outcomes: After going through this course the student will be able to: CO1: Exhibit program design and implementation competence through the choice of programming language. CO2: Identify how choice of data structures influences the performance of programs. CO3: Visualize the need of appropriate data structure in solving Real-life problems. CO4: Design a new data structure based on the need of the application using C++ and Java. Reference Books: th 1. E. Balaguruswamy, “Object Oriented Programming with C++”, McGraw Hill, 4 Edition, 2012, ISBN:0070593620 th 2. Herbert Schildt, “Java The Complete Reference J2SE”, 5 Edition, Tata McGraw Hill, 2007. 3. Bruce Eckel, “Thinking in Java”, Pearson education, 3 rd Edition 4. Sartaj Sahni ,“ Data Structures, Algorithms and Applications in C++”, McGraw Hill, 2000, ISBN:0-929306-33-3

Scheme and Syllabus – 2016 Admission Batch Page 31 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 M M H M M H -- L M M L CO2 M M H M M H -- L M M L CO3 M M H M M H -- L H M L CO4 M M H M M H -- L H M L

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H L CO2 H L CO3 H L CO4 H M

Scheme and Syllabus – 2016 Admission Batch Page 32 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

EMI and EMC Course Code : 16MRM241 CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Explain the concepts of electromagnetic wave theory, Maxwell's equations, electromagnetic fields, charges, currents. 2. Understand the fundamentals of applied electromagnetism by emphasizing physical and practical applications in modern communication systems. 3. Instill knowledge on the EMI coupling mechanism and its mitigation techniques 4. Gain comprehensive insight about the current EMC standards and about various measurement techniques Unit – I 10Hrs EMI/EMC Concepts - EMI-EMC definitions and Units of parameters; Sources and victim of EMI; Conducted and Radiated EMI Emission and Susceptibility; Transient EMI, ESD; Radiation Hazards. Unit – II 10Hrs EMI Coupling Principles - Conducted, radiated and transient coupling; Common ground impedance coupling; Common mode and ground loop coupling ; Differential mode coupling ; Near field cable to cable coupling, cross talk ; Field to cable coupling ; Power mains and Power supply coupling. Unit – III 10Hrs EMI Control Techniques Shielding, Filtering, Grounding, Bonding, Isolation transformer, Transient suppressors, Cable routing, Signal control. Unit – IV 10Hrs EMC Design Of PCB: Component selection and mounting; PCB trace impedance; Routing; Cross talk control; Power distribution decoupling; Zoning; Grounding; VIAs connection; Terminations. Unit – V 10Hrs EMI Measurements And Standards: Open area test site; TEM cell; EMI test shielded chamber and shielded ferrite lined anechoic chamber; Tx /Rx Antennas, Sensors, Injectors / Couplers, and coupling factors; EMI Rx and spectrum analyzer; Civilian standards-CISPR, FCC, IEC, EN; Military standardsMIL461E/462. Expected Course Outcomes: After going through this course the student will be able to: CO1: Apply the principles of electromagnetic to measure the effect of electromagnetic radiation on modern communication systems. CO2: Measure and analyze the system for EMI and EMC to the standards defined CO3: Design and develop a system and PCBs to reduce the effects of electromagnetic interference. CO4: Evaluate and test the modern communication systems for civilian and military standards.

Scheme and Syllabus – 2016 Admission Batch Page 33 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Reference Books: V P Kodali, “Engineering EMC Principles, Measurements and Technologies”, IEEE Press, 1. New York, 1996. Henry W.Ott, “Noise Reduction Techniques in Electronic Systems”, A Wiley Inter Science 2. Publications, John Wiley and Sons, New York, 1988. Bemhard Keiser, “Principles of Electromagnetic Compatibility”, Artech House, Norwood, 3. 3rd Edition, 1986. 4. C R Paul, “Introduction to Electromagnetic Compatibility”, John Wiley and Sons, Inc, 1992 5. Don R.J. White, “Handbook of EMI/EMC”, Vol I-V, Don White Consultants, 1988.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H L ------CO2 H L L - L ------CO3 H H - L L ------L -- -- CO4 H H - - L ------L -- --

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 - M CO2 - M CO3 M H CO4 M H

Scheme and Syllabus – 2016 Admission Batch Page 34 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

SOFTWARE DEFINED RADIO Course Code : 16MRM242 CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand the basics of software-defined radios (SDR), Signal processing devices, architecture, standards and components. 2. Differentiate the merits and demerits of SDR, Cognitive radio and Green radio with respect to the architecture, process and performance etc. 3. Analyze the usage of various Subsystem, Components, standards, and processes for optimum performance of SDR Radio. 4. Evaluate the performance of Cognitive radio, Green radio with respect to SDR. Unit – I 09Hrs Introduction to SDR : What is a Radio? What Is a Software-Defined Radio? Why SDR? Adaptive Coding and Modulation, Dynamic Bandwidth and Resource Allocation, Hierarchical Cellular Network, Cognitive Radio, Green Radio, When Things go Really Wrong, ACM Case Study ,Disadvantages of SDR, Cost and Power, Complexity , Limited Scope. Unit – II 10Hrs Signal Processing Devices and Signal Processing Architecture: General Purpose Processors, Digital Signal Processors, Field Programmable Gate Arrays, Specialized Processing Units, Application-Specific Integrated Circuits, Hybrid Solutions, Choosing a DSP Solution. GPP-Based SDR, FPGA-Based SDR, Host Interface, Architecture for FPGA-Based SDR, Hybrid and Multi-FPGA Architectures, Hardware Acceleration, 6.7 ti-Channel SDR. Unit – III 10Hrs SDR Standardization and Software Centric SDR Platforms: Software Communications Architecture and JTRS, SCA background, Controlling the waveform in SCA, SCA APIs. STRS, Physical Layer Description, Data Formats, GNU Radios, Open-Source SCA Implementation: Embedded, Other All-Software Radio Framework, Front End for Software Radio. Unit – IV 10Hrs Radio Frequency Front End Architectures and State-of-the-Art SDR Components: Transmitter RF Architectures, Direct RF synthesis, Zero-IF, Direct-IF, Super Heterodyne Up conversion. Receiver RF Front End Architectures, SDR Using Test Equipment, Transmitter, Receiver, Practical considerations. SDR Using COTS Components, Highly Integrated Solutions, Non-Integrated Solutions, ADCs, DACs. Exotic SDR Components. Unit – V 09Hrs Development Tools and Flows: Requirements Capture, System Simulation, Firmware Development, Electronic System Level Design, Block based System Design, Final Implementation. Software Development, Real Time versus Non Real Time Software, Optimization, Automatic Code Generation.

Scheme and Syllabus – 2016 Admission Batch Page 35 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Expected Course Outcomes: After going through this course the student will be able to: CO 1. Describe the basics of SDR, Cognitive radio, Green radio and its Architectures, components and tools used. CO 2. Analyze the merits and demerits of protocol architecture, process, components, standards and tools with respect to other wireless radios. CO 3. Apply the principles of protocol architecture, process, components, standards and tools for Performance evaluation of SDR. CO 4. Design and develop a Software Defined Radio as per the user requirements. Reference Books: Eugene Grayver, “Implementing Software Defined Radio”, Springer, ISBN 978-1-4419- 1. 9331-1, 2013. 2. Jeffrey.H.Reed, Software Radio: “A Modern Approach to Radio Engineering”, Pearson, LPE, ISBN 0-13-081158-0, 2002. 3. Markus Dillinger, KambizMadani, Nancy Alonistioti, “Software Defined Radio Architectures, Systems and Functions”, ISBN 0-470-85164-3, Wiley, 2003. 4. Joseph mitola “Software radio Architecture: Object oriented approaches to wireless system engineering by wiley-interscience, ISBN 0-471-38492-5, 1st edition 2000.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H M M M M L L -- M -- H CO2 M H H M H L L -- L -- M CO3 M H M H H L L -- L -- M CO4 M H H M H L H -- L M M

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 M M CO2 M M CO3 M M CO4 H H

Scheme and Syllabus – 2016 Admission Batch Page 36 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

RF MICRO ELECTRO MECHANICAL SYSTEMS Course Code : 16MRM251 CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Identify MEMS devices for a given application. 2. Formulate fabrication steps for passive and active MEMS devices 3. Design micro machined passive components 4. Model MEMS filters and Phase shifters 5. Analyze reliability issues in MEMS structures Unit – I 10Hrs Introduction: RF MEMS for microwave applications, MEMS technology and fabrication, mechanical modeling of MEMS devices, MEMS materials and fabrication techniques. MEMS Switches: Introduction to MEMS switches; Capacitive shunt and series switches: Physical description, circuit model and electromagnetic modeling; Techniques of MEMS switch fabrication and packaging; Design of MEMS switches Unit – II 10Hrs Inductors and Capacitors: Micro machined passive elements; Micro machined inductors: Effect of inductor layout, reduction of stray capacitance of planar inductors, folded inductors, variable inductors and polymer-based inductors; MEMS Capacitors: Gap-tuning and area-tuning capacitors, dielectric tunable capacitors. Unit – III 10Hrs RF Filters and Phase Shifters: Modeling of mechanical filters, micro machined filters, surface acoustic wave filters, micro machined filters for millimeter wave frequencies; Various types of MEMS phase shifters; Ferroelectric phase shifters. Unit – IV 10Hrs Transmission Lines and Antennas: Micromachined transmission lines, losses in transmission lines, coplanar transmission lines, micromachined waveguide components; Micromachined antennas: Micromachining techniques to improve antenna performance, reconfigurable antennas. Unit – V 10Hrs Integration and Packaging: Role of MEMS packages, types of MEMS packages, module packaging, packaging materials and reliability issues.

Expected Course Outcomes: After going through this course the student will be able to: CO1: Identify various RF for MEMS devices, their parameters and packaging standards CO2: Model MEMS filters and Phase shifters for specific RF applications. CO3: Analyze the reliability and design issues in MEMS structures CO4: Design micro machined passive components such as Inductors, Capacitors, Switches, Transmission lines and Antennas

Scheme and Syllabus – 2016 Admission Batch Page 37 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Reference Books: Vijay K Varadan , K J Vinoy and K A Jose, “RF MEMS and their Applications”, John 1. Wiley & Sons, 2002 2. Rebeiz G M, “MEMS: Theory Design and Technology”, John Wiley & Sons, 1999 De Los Santos H J, “RF MEMS Circuit Design for Wireless Communications”, Artech 3. House, 1999 4. Trimmer W, “Micromechanics & MEMS”, IEEE Press, 1996 5. Madou M, “Fundamentals of Microfabrication”, CRC Press, 1997

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H H H M H M -- -- L -- -- CO2 H H H M H M -- -- L -- -- CO3 H H H M H M -- -- L -- -- CO4 H H H M H M -- -- L -- --

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H L CO2 H L CO3 H L CO4 H L

Scheme and Syllabus – 2016 Admission Batch Page 38 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

WIRELESS SENSOR NETWORKS Course Code : 16MDC252/16MRM252 CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand the architecture, standards and applications of wireless sensor networks(WSN). 2. Analyze the need and structure of MAC protocol for WSN. 3. Develop WSN protocols and analyze their performance. 4. Identify the need and selection of operating system for WSN. Unit – I 10Hrs Introduction, Overview and Applications of Wireless Sensor Networks Introduction, Basic overview of the Technology, Applications of Wireless Sensor Networks: Introduction, Background, Range of Applications, Examples of Category 2 WSN Applications, Examples of Category 1 WSN Applications, Another Taxonomy of WSN Technology. Unit – II 10Hrs Basic Wireless Sensor Technology and Systems: Introduction, Sensor Node Technology, Sensor Taxonomy, WN Operating Environment, WN Trends, Wireless Transmission Technology and Systems: Introduction, Radio Technology Primer, Available Wireless Technologies Unit – III 10Hrs MAC and Routing Protocols for Wireless Sensor Networks: Introduction, Background, Fundamentals of MAC Protocols, MAC Protocols for WSNs, Sensor- MAC case Study, IEEE 802.15.4 LR-WPANs Standard Case Study. Routing Protocols for Wireless Sensor Networks: Introduction, Background, Data Dissemination and Gathering, Routing Challenges and Design Issues in WSNs, Routing Strategies in WSNs. Unit – IV 10Hrs Transport Control and Middleware for Wireless Sensor Networks : Traditional Transport Control Protocols, Transport Protocol Design Issues, Examples of Existing Transport Control Protocols, Performance of Transport Control Protocols. Middleware for Wireless Sensor Networks : Introduction, WSN Middleware Principles, Middleware Architecture, Existing Middleware . Unit – V 10Hrs Network Management and Operating System for Wireless Sensor Networks : Introduction, Network Management Requirements, Traditional Network Management Models, Network Management Design Issues. Operating Systems for Wireless Sensor Networks: Introduction, Operating System Design Issues, Examples of Operating Systems.

Expected Course Outcomes: After going through this course the student will be able to: CO1: Describe the type of sensor networks, protocols and applications of WSN. CO2: Identify various hardware, software platforms for sensor networks CO3: Analyze the design issues of MAC and Physical layers of WSN. CO4: Create architecture and Identify need and selection of protocols for WSN.

Scheme and Syllabus – 2016 Admission Batch Page 39 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Reference Books: 1. KazemSohraby, Daniel Minoli and TaiebZnati, “Wireless Sensor Networks: Technology, Protocols and Applications”, Wiley , 2nd Edition (Indian) , 2014 2. Ian F. Akyildiz, Mehmet Can Vuran "Wireless Sensor Networks", Wiley 2010 3. Feng Zhao & Leonidas J. Guibas, “Wireless Sensor Networks- An Information Processing Approach", Elsevier, 2007

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 L L H H ------M M -- -- CO2 H H H H ------H M -- -- CO3 L M H H ------M M -- -- CO4 -- M H H ------M M -- --

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 L L CO2 L L CO3 H L CO4 M L

Scheme and Syllabus – 2016 Admission Batch Page 40 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

MINOR PROJECT Course Code : 16MRF26 CIE Marks : 100 Hrs/Week : L:T:P:S 0:0:10:0 SEE Marks : 100 Credits : 05 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand the method of applying engineering knowledge to solve specific problems. 2. Apply engineering and management principles while executing the project 3. Demonstrate the skills for good presentation and technical report writing skills. 4. Identify and solve complex engineering problems using professionally prescribed standards. GUIDELINES 1. Each project group will consist of maximum of two students. 2. Each student / group has to select a contemporary topic that will use the technical knowledge of their program of study after intensive literature survey. 3. Allocation of the guides preferably in accordance with the expertise of the faculty. 4. The number of projects that a faculty can guide would be limited to four. 5. The minor project would be performed in-house. 6. The implementation of the project must be preferably carried out using the resources available in the department/college. Course Outcomes: After completion of the course the student would be able to : CO1: Conceptualize, design and implement solutions for specific problems. CO2: Communicate the solutions through presentations and technical reports. CO3: Apply resource managements skills for projects CO4: Synthesize self-learning, team work and ethics.

Scheme of Continuous Internal Examination (CIE) Evaluation will be carried out in THREE Phases. The evaluation committee will comprise of FOUR members: guide, two senior faculty members and Head of the Department.

Phase Activity Weightage Synopsis submission, Preliminary seminar for the approval of I 20% selected topic and Objectives formulation Mid-term seminar to review the progress of the work and 40% II documentation Oral presentation, demonstration and submission of project III 40% report **Phase wise rubrics to be prepared by the respective departments

CIE Evaluation shall be done with weightage / distribution as follows:

• Selection of the topic & formulation of objectives 10% • Design and simulation/ algorithm development/experimental setup 25% • Conducting experiments / implementation / testing 25% • Demonstration & Presentation 15% • Report writing 25%

Scheme and Syllabus – 2016 Admission Batch Page 41 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Scheme for Semester End Evaluation (SEE):

The evaluation will be done by ONE senior faculty from the department and ONE external faculty member from Academia / Industry / Research Organization. The following weightages would be given for the examination. Evaluation will be done in batches, not exceeding 6 students.

1. Brief writeup about the project 5% 2. Presentation / Demonstration of the project 20% 3. Methodology and Experimental Results & Discussion 25% 4. Report 20% 5. Viva Voce 30% Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 M M H H H ------M --- H H CO2 ------H ------H H H ---- CO3 H H M --- M M H H --- M H CO4 --- H ------H M M M H ---

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO) PSO1 PSO2 CO1 M L CO2 M H CO3 L M CO4 H H

Scheme and Syllabus – 2016 Admission Batch Page 42 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

III SEMESTER WIRELESS COMMUNICATION : 16MDC31/ : Course Code CIE Marks 100+50 16MRM31 Hrs/Week : L:T:P:S : 4:0:1:0 SEE Marks : 100+50 Credits : 5 SEE Duration : 3 + 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. To describe physical modeling for wireless channel, diversity techniques and capacity of wireless channel. 2. To explain the Space diversity in MIMO system, MIMO channel modeling and multiplexing capability of MIMO channels 3. To analyze the antenna considerations in MIMO Channels, Modelling of MIMO fading channels. 4. To identify and justify MIMO in wireless communication applications. Unit – I 10Hrs Wireless channel : physical modeling for wireless channels, input/output model of wireless channel, time and frequency response. Point to point communication: detection in Rayleigh fading channel, time diversity, antenna diversity, frequency diversity Unit – II 10Hrs Diversity : Introduction, Microdiversity, Microdiversity and simulcast, Combination of Signals, Error Probability in fading channels with diversity Reception, transmit diversity. Unit – III 10Hrs Capacity of wireless channels : AWGN channel capacity, resources of AWGN channel, Linear time invariant Gaussian channels, capacity of fading channels. Unit – IV 10Hrs MIMO Systems: Introduction, Space Diversity and Systems Based on Space Diversity, Smart antenna system and MIMO, MIMO based System architecture, MIMO exploits multipath, Space time Processing, Antenna considerations for MIMO, MIMO channel Modeling, MIMO Channel measurement, MIMO Channel capacity, Space Time Coding, Advantages and Applications of MIMO, MIMO applications in 3G Unit – V 10Hrs Spatial multiplexing and channel modeling: multiplexing capability of MIMO channels, physical modeling of MIMO channels, modeling MIMO fading channels. Laboratory Component MATLAB, Aero hive simulator, System vue, Qualnet. 1. Implementation of an adaptive equalizer based on LMS algorithm and studies the effect of step size on MSE. 2. Determination of error probabilities for orthogonal signaling using MATLAB employing (i) Hard Decision (ii) Soft decision decoding. 3. Simulation and analysis of the performance of a QPSK digital radio link in a Rayleigh fading environment. 4. Comparison of Digital modulation schemes over AWGN and flat fading channels. 5. Setup and analyse WiMax, UMTS, 2G, Wireless senor networks with different energy models and VoIP

Scheme and Syllabus – 2016 Admission Batch Page 43 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

6. Case Study: Link Budget Calculation in WPAN using the AeroHive Simulator .

Expected Course Outcomes: After going through this course the student will be able to: CO1: Describe physical modeling for wireless channel and diversity techniques. CO2: Analyze the Modeling of MIMO fading channels. CO3: Evaluate diversity techniques and multiplexing capability of MIMO channels. CO4: Design a MIMO system with smart antennas in wireless communication applications Reference Books: 1. David Tse, P. Viswanath, “Fundamentals of wireless communication”, Cambridge, 2006.ISBN 0-521-68749-7 2. Andreas Molisch, “Wireless communications”, John Wiley & Sons , 2012 3. Upen Dalal, “Wireless communication”, Oxford university Press, 2009 Scheme of Continuous Internal Evaluation (CIE) for Theory CIE will consist of TWO Tests, TWO Quizzes and ONE assignment. The test will be for 30 marks each and the quiz for 10 marks each. The assignment will be for 20 marks. The total marks for CIE (Theory) will be 100 marks. Scheme of Continuous Internal Evaluation (CIE) for Practical CIE for the practical courses will be based on the performance of the student in the laboratory, every week. The laboratory records will be evaluated for 40 marks. One test will be conducted for 10 marks. The total marks for CIE (Practical) will be for 50 marks. Scheme of Semester End Examination (SEE) for Theory The question paper will have FIVE questions with internal choice from each unit. Each question will carry 20 marks. Student will have to answer one question from each unit. The total marks for SEE (Theory) will be 100 marks. Scheme of Semester End Examination (SEE) for Practical SEE for the practical courses will be based on conducting the experiments and proper results for 40 marks and 10 marks for viva-voce. The total marks for SEE (Practical) will be 50 marks.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H M M --- L L ------CO2 M H H M H ------CO3 --- H ------H H --- H H ------CO4 --- H --- M H ------H H ------

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 L L CO2 H M CO3 M L CO4 H H

Scheme and Syllabus – 2016 Admission Batch Page 44 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

SMART ANTENNA AND MIMO Course Code : 16MRM321 CIE Marks : 100 Hrs/Week : L:T:P:S : 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand the concept of Beam forming in smart antenna design and its various configurations. 2. Explain and Analyze principles involved in designing Meta material Antennas and Reconfigurable Antennas. 3. Design Adaptive Antennas, Meta material Antennas and Reconfigurable Antennas for future applications. 4. Evaluate various design techniques of Adaptive Antennas, Meta material Antennas and Reconfigurable Antennas. Unit – I 10Hrs Introduction: Basic Antenna parameters, Types of linear arrays, Antenna synthesis techniques, Phased Array Antenna and Switched array antennas - Power Pattern, Beam Steering, Degree of Freedom, Optimal Antenna, Adaptive Antenna, Smart Antenna. Narrowband Processing: Signal Model , Steering Vector Representation , Eigen value Decomposition , Conventional Beamformer , Source in Look Direction , Directional Interference , Random Noise Environment, Signal-to-Noise Ratio, Null Steering Beamformer, Optimal Beamformer, Constrained and Unconstrained Beamformers Unit – II 10Hrs Adaptive Processing: Sample Matrix Inversion(SMI) Algorithm, Unconstrained Least Mean Squares Algorithm, Gradient Estimate, Covariance of Gradient, Convergence of Weight Vector, Convergence Speed, Transient Behavior of Weight Covariance Matrix, Excess Mean Square Error, Misadjustment, Normalized Least Mean Squares Algorithm, Constrained Least Mean Squares(LMS) Algorithm, Gradient Estimate, Recursive Least Mean Squares (RLS) Algorithm. Unit – III 10Hrs Direction-of-Arrival Estimation Methods: Spectral Estimation Methods, Bartlett Method, Minimum Variance Distortion less Response Estimator, Linear Prediction Method, Maximum Entropy Method, Maximum Likelihood Method, Eigen structure Methods, MUSIC Algorithm, Spectral MUSIC, Root-MUSIC, Constrained MUSIC, Beam Space MUSIC, Minimum Norm Method, CLOSET method, ESPRIT method Unit – IV 10Hrs Meta material Antennas Introduction , Negative Refractive Index (NRI) Meta materials , Meta material Antennas Based on NRI Concepts ,High-Gain Antennas Utilizing EBG Defect Modes, Antenna Miniaturization Using Dispersion Properties of Layered Anisotropic Media, Platform/Vehicle Integration of Meta material Antennas (Irci, Sertel, Volakis) , Wideband Metamaterial Antenna Arrays (Tzanidis, Sertel, Volakis) Unit – V 10Hrs Reconfigurable Antennas Introduction ,Analysis ,Overview of Reconfiguration Mechanisms for Antennas ,Control, Automation, and Applications

Scheme and Syllabus – 2016 Admission Batch Page 45 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Expected Course Outcomes: After going through this course the student will be able to: CO1: Explain parameters and principles of Adaptive Antennas, Metamaterial Antennas and Reconfigurable Antennas. CO2: Apply Signal processing concepts in analyzing beamforming techniques. CO3: Analyze and Compare various techniques employed in designing Adaptive Antennas, Metamaterial Antennas and Reconfigurable Antennas. CO4: Compute design parameters of Adaptive Antennas, Metamaterial Antennas and Reconfigurable Antennas. Reference Books: 1. Lal Chand Godara, ”Smart antenna” CRC press, London, 2004.ISBN:9780849312069 Frank B gross, "Frontiers in Antennas: Next Generation Design & Engineering" Mcgraw Hill 2. Publications, 2011. ISBN : 9780071637930 Balanis A.,”Antenna Theory analysis and Design”, Second Edition, John Wiley & Sons, New 3. York,1997. ISBN: 9780471592686 David Tse,” Fundamentals of Wireless Communication”, Cambridge University Press, 2005. 4. ISBN 0-521-68749-7 Scheme of Continuous Internal Evaluation (CIE) for Theory CIE will consist of TWO Tests, TWO Quizzes and ONE assignment. The test will be for 30 marks each and the quiz for 10 marks each. The assignment will be for 20 marks. The total marks for CIE (Theory) will be 100 marks. Scheme of Semester End Examination (SEE) for Theory The question paper will have FIVE questions with internal choice from each unit. Each question will carry 20 marks. Student will have to answer one question from each unit. The total marks for SEE (Theory) will be 100 marks.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 M ------L ------CO2 H L ------L -- -- CO3 H M M L -- L -- -- L -- -- CO4 H M H -- -- L ------

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 -- -- CO2 L -- CO3 H -- CO4 M --

Scheme and Syllabus – 2016 Admission Batch Page 46 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

ADVANCED MOBILE NETWORKS Course Code : 16MRM322 CIE Marks : 100 Hrs/Week : L:T:P:S: 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 5. Understand the basic concepts like architecture, components and services related to GSM networks. 6. Identify the key components and services of GPRS network. 7. Compare and contrast UMTS, HSPA, LTE, and LTE-Advanced technologies and use it to predict improvements in network performance. 8. Develop lifelong learning and research skills by undertaking a comprehensive study of an emerging research topic and effectively presenting it to the class Unit – I 10Hrs Introduction to GSM, GPRS and EDGE Technologies : Circuit-Switched Data Transmission, Transmission speeds, SS7 Protocol Stack, GSM Architecture, BSS and Voice Processing, Mobility Management (MM) and Call Control, Mobile device, SIM card, The Intelligent Network Subsystem and CAMEL. Packet-Switched Data Transmission over GPRS, GPRS Air Interface, GPRS State Model, GPRS Network Elements, MM & Session Management, Small Screen Web Browsing & MMS over GPRS and EDGE, Impact of Delay on the Web-Browsing Experience, Web Browser Optimization for Mobile Web Browsing. Unit – II 10Hrs Universal Mobile Telecommunications Systems (UMTS) and High-Speed Packet Access (HSPA): Overview, History, Important New Concepts of UMTS, CDMA, UMTS Channel Structure on the Air Interface, The UMTS Terrestrial Radio Access Network (UTRAN), Call establishment, security, HSDPA and HSPA+, HSUPA, HSPA performance in practice, UMTS and CDMA 2000. Unit – III 10Hrs 4G - Long Term Evolution (LTE): Introduction and Overview, Network architecture, FDD air interface and Radio Network, TD-LTE air interface, Scheduling, Mobility management & power optimization, LTE security architecture, Interconnection with GSM, UMTS, & CDMA 2000 networks, Voice and SMS over LTE, Recent advances in LTE. Unit – IV 10Hrs Mm Wave Massive MIMO: A paradigm for 5G : Requirements of Key capabilities for 5G, 5G Network architecture based on mmWave Massive MIMO, Challenges, Hybrid Antenna array, encoding and detection, channel estimation, channel modeling, MAC Layer design and mm-Wave cellular networks Stochastic geometry modeling analysis and experimental validation. Unit – V 10Hrs Machine to Machine Communications in 5G: Introduction, Fundamental techniques for machine type communications (MTC), Massive MTC, Ultra reliable low latency MTC, D2D communications: research challenges, CoMP techniques, Proximity Services and Device to Device Communications, Enhancements for Machine-Type Communications and Mobile Data, Traffic Offloading Enhancements.

Scheme and Syllabus – 2016 Admission Batch Page 47 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Self Study Component Topics on latest/ emerging technology will be assigned. Students are required to read white papers, publications, patients, and prepare a report, give a seminar on the study undertaken. Expected Course Outcomes: After going through this course the student will be able to: CO5: Explain the theoretical concepts of GSM, GPRS architectures and their services. CO6: To analyze and design wireless and mobile cellular systems. CO7: Analyze the performance parameters of various existing mobile standards. CO8: Perform a LTE network link planning computation to check the feasibility of 4G radio network operation. Reference Books: Martin Sauter, “From GSM to LTE-Advanced: An Introduction to Mobile Networks and 1. Mobile Broadband”, Revised Second Edition, ISBN: 978-1-118-86195-0, 456 pages, July 2014. Shahid Mumtaz, Jonathan Rodriguez, Linglong Dai, “mmWave Massive MIMO: A Paradigm 2. for 5G”, Academic Press, ISBN: 0128044780, 9780128044780, 372 pages, December 2016. Cox C, "An Introduction to LTE: LTE, LTE-Advanced, SAE, VoLTE and 4G Mobile 3. Communications". 2nd Edition, Wiley, ISBN: 978-1-118-81803-9, 486 pages, July 2014. Sesia, S., Baker, M., Toufik, I., "LTE - the UMTS long term evolution: from theory to 4. practice." 2nd Edition, Wiley 2011 (ISBN 978-0-470-69716) Afif Osseiran, Jose F. Monserrat and Patrick Marsch, “5G Mobile and Wireless 5. Communications Technology”, 1 st Edition, Cambridge University Press, June 2016, ISBN 978-1-107-13009-8. Scheme of Continuous Internal Evaluation (CIE) for Theory CIE will consist of TWO Tests, TWO Quizzes and ONE assignment. The test will be for 30 marks each and the quiz for 10 marks each. The assignment will be for 20 marks. The total marks for CIE (Theory) will be 100 marks. Scheme of Semester End Examination (SEE) for Theory The question paper will have FIVE questions with internal choice from each unit. Each question will carry 20 marks. Student will have to answer one question from each unit. The total marks for SEE (Theory) will be 100 marks.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 L L --- M L ------H H ------CO2 M H H H H H L M H H H CO3 - M L H H L --- M M --- M CO4 L H H H M M M M L L M

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO) PSO1 PSO2 CO1 -- L CO2 H H CO3 M M CO4 H H

Scheme and Syllabus – 2016 Admission Batch Page 48 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

MONOLITHIC MICROWAVE INTEGRATED CIRCUITS Course Code : 16 MRM331 CIE Marks : 100 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand the basics of MMIC design, components, devices and packaging. 2. Analyze the design challenges of passive and active MMIC Circuits 3. Analyze the characteristics of passive and active MMIC Circuits. 4. Learn the fabrication steps of MMICs. Unit – I 10Hrs Introduction to MMIC Design : Types : HMICs, MMICs, Comparison of Advantages and tradeoffs Applications : Satellite communications, wireless LANs, microwave links, cellular networks etc. Material properties: Silicon, Germanium, Compound semiconductors - GaAs, GaN, SiC, InP Design cycle: process selection, device characterization, circuit topology decision, design, taping- out, testing. Choosing among device technologies: Diodes, BJTs, MOSFETs, MESFETs, LDMOSFETs, HBTs, HEMTs. HMIC Technologies, Thick film and Thin film, Co-fired, MMIC technology, MMIC design using CAD Tools Unit – II 10Hrs Passive Elements on RFICs : Lumped element design - Resistors, Capacitors, Inductors. Distributed element design – microstrip lines, coplanar lines. Tools for Network analysis: S parameters, Signal flow graphs, Smith charts Power dividers, Hybrids, Couplers – Wilkinson combiners, N-way combiners, Corporate combiners. Impedance matching networks – design of Narrow band and Wide band matching networks. Unit – III 10Hrs Active Devices on RFICs : Hybrid Amplifiers LNAs- Narrow band and wide band, Power Amplifiers - Narrow band and wide band, Monolithic Amplifiers –Technology, Design, Examples, Stability analysis – even mode, odd mode, low frequency, spurious oscillations. Mixers , Oscillator, VCO Unit – IV 10Hrs MMIC Fabrication Principles: Crystal growth, Doping, Diffusion, Epitaxy, Ion Implantation, Thermal Oxidation, Plasma Process, Deposition of films, Unit – V 10Hrs MMIC Fabrication Principles: Etching, Cleaning, Lithography, Device and circuit fabrication, Thermal Considerations - basics, transistor thermal design, heat sink design Packaging - Overview, Materials for Packaging, Ceramic Package, Plastic Package, Package Assembly, Thermal design, CAD Tools Packaging.

Scheme and Syllabus – 2016 Admission Batch Page 49 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Expected Course Outcomes: After going through this course the student will be able to: CO1: Understand the basics of MMIC design, components, devices and packaging. CO2: Analyze the design challenges of passive and active MMIC Circuits CO3: Analyze the characteristics of passive and active MMIC Circuits. CO4: Follow the fabrication steps of MMICs Reference Books: 1. Inder J Bahl, “Fundamentals of RF and Microwave Transistor Amplifiers”, John Wiley & sons Inc, 2009. ISBN: 978-0-470-39166-2 2. Michaael Steer, “Microwave and RF design – A systems approach “, Scitech publishing, Inc, 2010. ISBN: 978-97-465-2175-8 3. Sorab. K. Ghandhi, “VLSI Fabrication principles – Silicon and Gallium Arsenide”, Wiley India, 2ND Edition, 2009, ISBN: 978-81-265-1790-9 4. Paolo Colantonio, Franco Giannini, Ernesto Limiti, “High Efficiency RF and Microwave Solid State Power Amplifiers”, John Wiley and Sons Inc, 2009. 5. I. D. Robertson, S. Lucyszyn, “ RFIC and MMIC design Technology”, IEE Publications, 2001, ISBN: 0- 85296- 786 -1 Scheme of Continuous Internal Evaluation (CIE) for Theory CIE will consist of TWO Tests, TWO Quizzes and ONE assignment. The test will be for 30 marks each and the quiz for 10 marks each. The assignment will be for 20 marks. The total marks for CIE (Theory) will be 100 marks. Scheme of Semester End Examination (SEE) for Theory The question paper will have FIVE questions with internal choice from each unit. Each question will carry 20 marks. Student will have to answer one question from each unit. The total marks for SEE (Theory) will be 100 marks.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H M L ------CO2 H M L ------CO3 H M H H H ------CO4 H M M ------

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 L L CO2 M L CO3 H M CO4 H M

Scheme and Syllabus – 2016 Admission Batch Page 50 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

SATELLITE NAVIGATION SYSTEMS : 16MDC332\ Course Code CIE Marks : 100 16MRM332 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Understand basic concepts of radar components and apply these concepts in the Communication to extract information. 2. Analyze the Radar signal in presence of noise and clutter. 3. Describe Signal Structure, Characteristics, and Information Utilization and Antenna Characteristics required for Satellite Navigation System. 4. Describe and analyze data errors in Satellite Navigation System. Unit – I 10Hrs An Introduction to Radar: Basic Radar, The simple form of the Radar Equation, Radar Block Diagram, Radar Frequencies, Application of radar, Types of Radars. The Radar Equation : Introduction, Detection of signals in Noise, Receiver Noise and the Signal-to Noise Ratio, Probability of Detection and False alarm, Integration of radar Pulses, Radar Cross Section of the targets, Radar Cross sections of Fluctuations, Transmitter power, Pulse repetition Frequency, Antenna Parameters, System Losses. Fundamentals of Pulse Compression Waveforms: Range Resolution, Straddle Loss, Pulse Compression Waveforms, Pulse Compression Gain, Linear Frequency Modulation Waveform, Matched filter implementations, Sidelobe reductions in an LFM waveforms, Ambiguity Function, Phased Coded waveforms, Biphase codes, Polyphase codes. Unit – II 10Hrs Information Available from Radar Signals: Basic Radar measurement, Theoretical Accuracy of Radar Measurement, Ambiguity Function, Pulse Compression, Target reorganization. Radar Antenna Reflector antennas, Electronically steered phased array antennas, Phased shifters, Low side lobes antennas MTI and Pulse Doppler Radar: Introduction to Doppler and MTI Radar, Delay-Line Cancellers, Staggered Pulse Repetition frequencies, Doppler Filter Banks, Digital MTI processing, Moving Target detector, Limitations to MTI Platform, Pulse Doppler Radar. Unit – III 10Hrs Terrestrial Network based positioning and navigation : Fundamentals, positioning in cellular networks, positioning in WLANs, Positioning in Wireless sensor networks, Ranging and Navigation in RADAR systems-Radar equation, clutter, Digital MTI, Tracking. Unit – IV 10Hrs Orbits and Reference Systems: Basics of satellite orbits and reference systems, two body problem, orbit elements, timer system and timer transfer using GPS, coordinate systems, GPS orbit design, orbit determination problem, tracking networks, GPS force and measurement models for orbit determination, orbit broadcast ephemeris, precise GPS ephemeris, Tracking problems.

Scheme and Syllabus – 2016 Admission Batch Page 51 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Unit – V 10Hrs Satellite-based navigation systems: Global Navigation satellite systems (GNSS), GNSS receivers, Augmented systems and assisted GNSS. Expected Course Outcomes: After going through this course the student will be able to: CO1: Applying radar concepts to analyze radar signal. CO2: Explain the basic principles, Signal structure and performance parameters, Signal Acquisition and Tracking, Data Errors of the satellite navigation System. CO3: Compute the user position, velocity and system parameters in Satellite Navigation System CO4: Analyze the signal acquisition and tracking system and design of Satellite Navigation Receiver Components/System. Reference Books: 1. M. L Skolnik, “Introduction to RADAR Systems”, TATA Mcgraw-Hill, 2001. 2. Mark A Richards, James A scheer, William A Holam, “Principles of Modern Radar Basic principles”, Yes Dee Publishing Pvt Ltd, 2012 3. Mohinder S. Grewal, Angus P. Andrews ,Chris G. Bartone "Global Navigation Satellite Systems, Inertial Navigation, And Integration " Third Edition, John Wiley and Sons , 2013, ISBN 978-1-118-44700-0 4. B. Hoffman, Wellenhof, H. Lichtenegger and J. Collins, “GPS - Theory and Practice”, 5th revised edition, Springer, NewYork, 2001. 5. Davide dardari, Emanuela Falletti, Marco Luise, “ Satellite and Terrsetrial Radio Positioning techniques- A signal processing perspective”, Elsevier Academic Press, First edition, 2012 Scheme of Continuous Internal Evaluation (CIE) for Theory CIE will consist of TWO Tests, TWO Quizzes and ONE assignment. The test will be for 30 marks each and the quiz for 10 marks each. The assignment will be for 20 marks. The total marks for CIE (Theory) will be 100 marks. Scheme of Semester End Examination (SEE) for Theory The question paper will have FIVE questions with internal choice from each unit. Each question will carry 20 marks. Student will have to answer one question from each unit. The total marks for SEE (Theory) will be 100 marks.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H M M ------L ------CO2 H L L ------L ------CO3 H M H ------L ------CO4 H H M ------L ------

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 M -- CO2 L -- CO3 M -- CO4 M L

Scheme and Syllabus – 2016 Admission Batch Page 52 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

TERAHERTZ COMMUNICATION Course Code : 16MRM341 CIE Marks : 100 Hrs/Week : L:T:P:S : 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. To learn THz overview principles, components technologies 2. To learn about THz sources and detectors 3. To Analyze THz signal sources and applications 4. To learn about THz applications for Industry and wireless communication Unit – I 10Hrs

Terahertz Overview and Principles: Electromagnetic Radiation and Propagation Fundamentals, Terahertz Principles, Behavior of Atmosphere in the Terahertz region, Key technological issues for Terahertz technology, Fundamental limits, power combining, Experimental approach, Terahertz technology Applications and opportunities .

Unit – II 10Hrs Terahertz Sources : The development of Terahertz sources, Terahertz sources based on Schottky diode frequency multipliers, Free Electron based Tera Hertz sources, Compact Tunable Terahertz Sources very short wave length Vacuum Electronic devices, Photo mixing Tunable Terahertz sources, Terahertz magnetic response from artificial material, Continuous wave THz radiation generation through non linear processes, Terahertz sources using Triply resonant non liner crystal cavities, Silicon wave guide based Terahertz sources. Unit – III 10Hrs THz Detectors : Pyroelecrtic detectors, gallium doped Germanium photoconductive detector, Bolometer detectors, composite Germanium Bolometer, unturned Indium Antimode, Go lay Cell detectors, Terahertz Electronic components, Travelling Wave Terahertz detector, Tunable Plasma Wave-HEMT THz Detector, Terahertz detector on a single chip, Quantum dot Photo detector, Multiband Terahertz detection and imaging devices, Integrated Terahertz Imager based on quantum dots, CNT based QD frequency tunable THz detector, On Chip Terahertz detection, Wide Band width Hot electron Bolometer Heterodyne detector. Unit – IV 10Hrs Low coherence THz signal sources and applications and THz chemical spectroscopy : Introduction, Schemes for Noise generation, Characterization of noise signals,Imaging,2D imaging, Tomographic imaging, spectroscopy, amplifier characterization, Terahertz chemical spectroscopy Introduction, THZ TDS, Application: Quantitive analysis of Amino Acids in supplements, Terahertz spectroscopic imaging, overview, measurement system, Application(1):chemical mapping of pharmaceuticals in medicine, Application (2):chemical mapping of pharmaceuticals cocrystals Unit – V 10Hrs Industrial and Wireless communications Applications of Terahertz waves : Different kinds of Terahertz systems, Optoelectronic generation and detection of the Terahertz waves, using photoconductive antennas ,Polymer Industry, Polymeric compounds, Paper Industry, Food Industry, Pharmaceuticals Industry, crops Industry why the terahertz waves for communication, Application scene of terahertz communication, current technologies, frequency dispersion, Ray shadowing by moving persons Modeling of the Terahertz Indoor Radio channel.

Scheme and Syllabus – 2016 Admission Batch Page 53 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Expected Course Outcomes: After going through this course the student will be able to: CO1: Identify THz principles and components. CO2: Select THz sources and detectors for a given for different applications. CO3: Analyze suitability of THz imaging and spectroscopy systems for different applications. CO4: Apply THZ systems knowledge for different Industrial and communication applications. Reference Books: Rostami, Ali Rasooli, Hassan Baghban “Terahertz Technology: Fundamentals and 1. applications”, New York, Springer, 2011 RE Miles,P Harisson, D Lippens “Terahertz Sources and Systems “,Springer Science + 2. Business media, BV 2000 3. Kiyomi Sakai, “Terahertz Optoelectronics”, Springer, 2004 Ho-Jin Song,Tadao Nagatsuma, “Handbook of Terahertz Technologies , Devices and 4. applications”, Pan Stanford Publishing Pte. Ltd. 2015 Yun-Shik lee, “Principles of Terahertz Science and Technology, Springer Science + Business 5. media, BV 2009. Scheme of Continuous Internal Evaluation (CIE) for Theory CIE will consist of TWO Tests, TWO Quizzes and ONE assignment. The test will be for 30 marks each and the quiz for 10 marks each. The assignment will be for 20 marks. The total marks for CIE (Theory) will be 100 marks. Scheme of Semester End Examination (SEE) for Theory The question paper will have FIVE questions with internal choice from each unit. Each question will carry 20 marks. Student will have to answer one question from each unit. The total marks for SEE (Theory) will be 100 marks.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H L L M ------CO2 H M L L ------CO3 H H M M ------CO4 H M H M ------

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO) PSO1 PSO2 CO1 L L CO2 H L CO3 M M CO4 M M

Scheme and Syllabus – 2016 Admission Batch Page 54 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

BROADBAND NETWORKS 16 MDC342/ Course Code : CIE Marks : 100 16MRM342 Hrs/Week : L:T:P:S 4:0:0:0 SEE Marks : 100 Credits : 4 SEE Duration : 3 Hrs Course Learning Objectives (CLO): This course will enable student to: 1. Analyze the transmission mechanism in the physical layer. 2. Apply QoS Mechanism in MAC layer design 3. Design a WiMAX system with Radio considerations Unit – I 10Hrs Review Of Access Technologies : Phone Line modem, cable access, ISDN, Emerging Broad band Technologies: Cable DSL, Fiber and Wireless. Digital Subscriber Lines : Asymmetric Digital subscriber lines (ADSL) ,Rate Adaptive subscriber line (RADSL),ISDN Digital subscriber line (IDSL) ,High bit rate DSL (HDSL),Single line DSL (SDSL),very high bit rate DSL (VDSL), Standards for XDSL & Comparison. Unit – II 10Hrs Cable Modem: Cable Modem, DOCSIS- Physical Cabling, Dual Modem Operation, Hub Restriction, Upstream Operation, Downstream operation ,Access control, framing Security sub layer, Data link layer, LLC & Higher layers, ATM centric VS IP, centric cable modem. Unit – III 10Hrs Fiber Access Technologies: Optical Fiber in access networks, Architecture and Technologies- Hybrid fiber – Coax (HFC) system, Switched Digital Video (SDV) – Passive optical networks (PON) – FTTX (FTTH, FTTB, FTTC, FTT cab) comparison. Unit – IV 10Hrs Introduction to Broadband Wireless Access : The Need for Wireless Data Transmission, Wireless Networks and Broadband Wireless Access (BWA), Applications of BWA, History of BWA Technologies 3G Networks : Evolution from GSM, 3G Services and Applications - UMTS network structure - Protocol stack 4G – LTE: Overview of LTE Networks - Need for LTE- LTE Architecture, Radio Protocol stack , Interfaces, Security Protocols. Unit – V 10Hrs 802.11n: Introduction, Channel Structure and Layout ,802.11n Speed, Mandatory PHY Features, Mandatory MAC Features, Network Architecture for 802.11n, 802.11n Hardware Coverage and Capacity Planning ,Network Management Design and Implementation issues Expected Course Outcomes: After going through this course the student will be able to: CO1: Understand the framework of broad band access technologies. CO2: Analyze the architectures of broad band access technologies. CO3: Compare the functionalities, protocols and architectures of broad band access technologies. CO4: Design broad band access systems. Reference Books: 1. Niel Ransom and Albert A. Azzam, “Broadband Access Technologies: ADSL, VDSL Cable Modem, Fiber and LMDS", McGraw Hill, 1999.

Scheme and Syllabus – 2016 Admission Batch Page 55 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

2. Gilbert Held, “Next Generation Modems: A Professional Guide to DSL and cable modems”, John Wiley & sons. 3. Walter j Woralski, “ADSL and DSL Technologies”, McGraw Hill computer Communication series, 1998. 4. Matthew S. Gast,” 802.11n: A Survival Guide”, O'Reilly Media, 2012 Scheme of Continuous Internal Evaluation (CIE) CIE will consist of TWO Tests, TWO Quizzes and self-study. The test will be for 30 marks each and the quiz for 10 marks each. The self-study component will be for 20 marks and the students are supposed to share orally in the class and submit optimized solution after discussions to faculty in-charge. The total marks for CIE (Theory) will be 100 marks. Scheme of Semester End Examination (SEE) The question paper will have FIVE questions with internal choice from each unit. Each question will carry 20 marks. Student will have to answer one question from each unit. The total marks for SEE (Theory) will be 100 marks.

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H ------L ------M CO2 H H H ------L ------M CO3 H --- H H M L L M L L M CO4 H --- H H M L L M L L M

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 M L CO2 M L CO3 M M CO4 H H

Scheme and Syllabus – 2016 Admission Batch Page 56 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

INTERNSHIP / INDUSTRIAL TRAINING Course Code : 16MRM35 CIE Marks : 100 Hrs/Week : L:T:P:S 0:0:6:0 SEE Marks : 100 Credits : 3 SEE Duration : 30 min GUIDELINES FOR INTERNSHIP Course Learning Objectives (CLO): This course will enable student to: 1. Understand the process of applying engineering knowledge to produce product and provide services. 2. Explain the importance of management and resource utilization 3. Comprehend the importance of team work, protection of environment and sustainable solutions. 4. Imbibe values, professional ethics for lifelong learning.

1. The duration of the internship shall be for a period of 8 weeks on full time basis between II semester final exams and beginning of III semester. 2. The student must submit letters from the industry clearly specifying his / her name and the duration of the internship on the company letter head with authorized signature. 3. Internship must be related to the field of specialization or the M.Tech program in which the student has enrolled. 4. Students undergoing internship training are advised to use ICT tools such as skype to report their progress and submission of periodic progress reports to the faculty members. 5. Every student has to write and submit his/her own internship report to the designated faculty. 6. Students have to make a presentation on their internship activities in front of the departmental committee and only upon approval of the presentation should the student proceed to prepare and submit the hard copy of the internship final report. However interim or periodic reports and reports as required by the industry / organization can be submitted as per the format acceptable to the respective industry /organizations. 7. The reports shall be printed on bond paper – 80GSM, back to back print, with soft binding – A4 size with 1.5 spacing and times new roman font size 12. 8. The broad format of the internship final report shall be as follows • Cover Page • Certificate from College • Certificate from Industry / Organization • Acknowledgement • Synopsis • Table of Contents • Chapter 1 - Profile of the Organization – Organizational structure, Products, Services, Business Partners, Financials, Manpower, Societal Concerns, Professional Practices, • Chapter 2 - Activities of the Department - • Chapter 3 – Tasks Performed – summaries the tasks performed during 8 week period

Scheme and Syllabus – 2016 Admission Batch Page 57 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

• Chapter 4 – Reflections – Highlight specific technical and soft skills that you acquired during internship • References & Annexure

Course Outcomes: After going through the internship the student will be able to: CO1: Apply engineering and management principles CO2: Analyze real-time problems and suggest alternate solutions CO3: Communicate effectively and work in teams CO4: Imbibe the practice of professional ethics and need for lifelong learning.

Scheme of Continuous Internal Evaluation (CIE): A committee comprising of the Head of the Department / Associate Dean, Associate Professor, Assistant Professor and Guide would review the presentation and the progress reports in two phases. The evaluation criteria shall be as per the rubrics given below:

Scheme for Semester End Evaluation (SEE): The evaluation will be done by ONE senior faculty from the department and ONE external faculty member from Academia / Industry / Research Organization. The following weightages would be given for the examination. Evaluation will be done in batches, not exceeding 6 students. (1) Explanation of the application of engineering knowledge in industries 35% (2) Ability to comprehend the functioning of the organization/ departments 20% (3) Importance of resource management, environment and sustainability 25% (4) Presentation Skills and Report 20%

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 --- M H M --- M ------L --- CO2 ------H M M --- L ------CO3 ------L --- M H H ------CO4 ------L --- H ------M H

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H --- CO2 L L CO3 --- M CO4 M H

Scheme and Syllabus – 2016 Admission Batch Page 58 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

GUIDELINES FOR INDUSTRIAL TRAINING Course Learning Objectives (CLO): This course will enable student to: 1. Understand the process of applying engineering knowledge to industrial products & processes 2. Explain the importance of skilling, training and resource management. 3. Comprehend the importance of team work, communication and sustainable solutions. 4. Imbibe values, professional ethics for lifelong learning.

1) The duration of industrial training must be for a minimum of 1 week and maximum of 8 weeks on full time basis. 2) Industrial Training in which students pays a fee to the organization / industry will not be considered. 3) He/she can undergo training in one or more industry /organization. 4) The student must submit letters from the industry clearly specifying his / her name and the duration of the training provided by the company with authorized signatures. 5) Industrial training must be related to the field of specialization or the M.Tech program in which the student has enrolled. 6) Students undergoing industrial training are advised to use ICT tools such as Skype to report their progress and submission of periodic progress reports to the faculty members. 7) Every student has to write and submit his/her own industrial training report to the designated faculty. 8) Students have to make a presentation on their industrial training in front of the departmental cmmittee and only upon approval of the presentation should the student proceed to prepare and submit the hard copy of the final report. 1) The reports shall be printed on bond paper – 80GSM, back to back print, with soft binding – A4 size with 1.5 spacing and times new roman font size 12. 2) The broad format of the industrial training report shall be as follows • Cover Page • Certificate from College • Training Certificate from Industry / Organization • Acknowledgement • Executive Summary • Table of Contents • Chapter 1 - Profile of the Organization –Organizational structure, Products, Services, Business Partners, Financials, Manpower, Societal Concerns, Professional Practices • Chapter 2 – Details of the Training Modules • Chapter 3 – Reflections – Highlight specific technical and soft skills that you acquired References & Annexure

Course Outcomes: After going through the industrial training the student will be able to: CO1: Understand the process of applying engineering knowledge to solve industrial

Scheme and Syllabus – 2016 Admission Batch Page 59 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

problems CO2: Develop skills through training relevant to industrial requirement CO3: Communicate effectively and work in teams CO4: Imbibe ethical practices and develop it as life skill.

Scheme of Continuous Internal Evaluation (CIE): A committee comprising of Head of the Department / Associate Dean, Associate Professor, Assistant Professor and Guide would review the presentation and the progress reports in two phases. The evaluation criteria shall be as per the rubrics given below:

(1) Explanation on the application of engineering knowledge 25% (2) Ability to comprehend the importance of skilling and training 25% (3) Importance of communication, professional ethics, sustainability 20% (4) Oral Presentation and Report 30%

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 --- M H M --- M ------L --- CO2 ------H M M --- L ------CO3 ------L --- M H H ------CO4 ------L --- H ------M H

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H --- CO2 L L CO3 --- M CO4 M H

Scheme and Syllabus – 2016 Admission Batch Page 60 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

GUIDELINES FOR INDUSTRIAL VISITS Course Learning Objectives (CLO): This course will enable student to: 1. Understand the role of industries and service organization in meeting the demands of the society. 2. Explain the working of different industries and organizations with an engineering perspective 3. Comprehend the importance of team work, communication and sustainable solutions. Imbibe values, professional ethics for life long learning.

1. Student must visit a minimum of THREE organizations/industry. The duration of the visit per organization must be for ONE full day, during which he/she must comprehend the importance of organization structure, function of various departments, application of engineering knowledge, resource management, importance to environment and safety, professional ethics. 2. It is mandatory to visit ONE private multi-national company or public sector industry / organization, ONE medium-small enterprise and ONE rural based or NG organization. 3. The student must submit letter from the industry clearly specifying his / her name and the date of visit to the industry with authorized signatures. 4. Industrial visit must be related to the field of specialization or the M.Tech program in which the student has enrolled. 5. Every student has to write and submit his/her own report on each industrial visit and submit the report to the designated faculty advisor for evaluation. 6. A photograph outside the industry with the name and logo of the industry in the background along with the students and faculty members could be included in the report. 7. Students have to make a presentation on their industrial visit in front of the departmental committee and only upon approval of the presentation should the student proceed to prepare and submit the hard copy of the final report. 8. The reports shall be printed on bond paper – 80GSM, back to back print, with soft binding – A4 size with 1.5 spacing and times new roman font size 12. 9. The broad format of the industrial visit report shall be as follows • Cover Page • Certificate from College • Acknowledgement • Synopsis / Executive Summary • Table of Contents • Chapter 1 - Profile of the PSU or MNC – must include Organizational structure, Products, Services, Financials, Manpower, Societal Concerns, Professional Practices • Chapter 2 – Profile of the SME – must include Organizational structure, Products, Services, Financials, Manpower, Societal Concerns, Professional Practices • Chapter 3 - Profile of the NGO – must include Organizational structu re, services, Manpower, Societal Concerns, Professional Practices • Chapter 4 – Comparative Analysis of PSU/MNC – SME – NGO

Scheme and Syllabus – 2016 Admission Batch Page 61 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

• References & Annexure (Permission letters from the organizations for the visit & photographs) Course Outcomes: After going through this course the student will be able to: CO1: Classify the role of different industries and organization in addressing the needs of the society. CO2: Explain the process of applying engineering knowledge in industries and organizations. CO3: Describe the importance of communication and team work CO4: Recognize the importance of practicing professional ethics and need for life skills. Scheme of Continuous Internal Evaluation (CIE): A committee comprising of Head of the Department / Associate Dean, Associate Professor, Assistant Professor and Guide would review the presentation and the progress reports in two phases. The evaluation criteria shall be as per the rubrics given below:

(1) Explanation of the application of engineering knowledge in industries 25% (2) Ability to comprehend the functioning of the organization/ departments 30% (3) Importance of resource management, environment and sustainability 20% (4) Presentation Skills and Report 25%

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 --- M H M --- M ------L --- CO2 ------H M M --- L ------CO3 ------L --- M H H ------CO4 ------L --- H ------M H

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H --- CO2 L L CO3 --- M CO4 M H

Scheme and Syllabus – 2016 Admission Batch Page 62 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

TECHNICAL SEMINAR Course Code : 16MRM36 CIE Marks : 50 Hrs/Week : L:T:P:S 0:0:4:0 SEE Marks 50 Credits : 2 SEE Duration 30 min

Course Learning Objectives (CLO): This course will enable student to: 1. Understand the technological developments in their chosen field of interest 2. Explain the scope of work and challenges in the domain area 3. Analyze these engineering developments in the context of sustainability and societal concerns. 4. Improve his/her presentation skills and technical report writing skills GUIDELINES 1. The presentation will have to be done by individual students. 2. The topic of the seminar must be in one of the thrust areas with in-depth review and analysis on a current topic that is relevant to industry or on-going research. 3. The topic could be an extension or complementary to the project 4. The student must be able to highlight or relate these technological developments with sustainability and societal relevance. 5. Each student must submit both hard and soft copies of the presentation.

Course Outcomes: After going through this course the student will be able to: CO1:Identify topics that are relevant to the present context of the world CO2: Perform survey and review relevant information to the field of study. CO3: Enhance presentation skills and report writing skills. CO4: Develop alternative solutions which are sustainable Scheme of Continuous Internal Evaluation (CIE): Evaluation would be carried out in TWO phases. The evaluation committee shall comprise of Head of the Department / Associate Dean, Associate Professor, Assistant Professor and Guide. The evaluation criteria shall be as per the rubrics given below:

Rubrics for Evaluation: 1) Topic – Technical Relevance, Sustainability and Societal Concerns 15% 2) Review of literature 25% 3) Presentation Skills 35% 4) Report 25%

Scheme and Syllabus – 2016 Admission Batch Page 63 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 --- H M M L H H ------M CO2 L M ------H --- CO3 ------L M H ------CO4 --- L M --- H H ------H

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H L CO2 M H CO3 M L CO4 H L

Scheme and Syllabus – 2016 Admission Batch Page 64 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

IV SEMESTER MAJOR PROJECT Course Code : 16MRM41 CIE Marks : 100 Hrs/Week : L:T:P:S 0:0:52:0 SEE Marks : 100 Credits : 26 SEE Duration : 3 Hours Course Learning Objectives: This course will enable student to: 5. Understand the method of applying engineering knowledge to solve specific problems. 6. Apply engineering and management principles while executing the project 7. Demonstrate good verbal presentation and technical report writing skills. 8. Identify and solve complex engineering problems using professionally prescribed standards. GUIDELINES 1. Major project will have to be done by only one student in his/her area of interest. 2. Each student has to select a contemporary topic that will use the technical knowledge of their program of specialization. 3. Allocation of the guides preferably in accordance with the expertise of the faculty. 4. The number of projects that a faculty can guide would be limited to three. 5. The project can be carried out on-campus or in an industry or an organization with prior approval from the Head of the Department. 6. The standard duration of the project is for 16 weeks, however if the guide and the evaluation committee of the department, after the assessment feel that the work is insufficient and it has to be extended, then the student will have to continue as per the directions of the guide and the committee. 7. It is mandatory for the student to present his/her work in one of the international conferences or publish the research finding in a reputed unpaid journal with impact factor. Course Outcomes: After going through this course the students will be able to CO1: Conceptualize, design and implement solutions for specific problems. CO2: Communicate the solutions through presentations and technical reports. CO3: Apply project and resource managements skills, professional ethics, societal concerns CO4: Synthesize self-learning, sustainable solutions and demonstrate life long learning

Scheme of Continuous Internal Examination (CIE) Evaluation will be carried out in THREE Phases. The evaluation committee will comprise of: guide, two senior faculty members, one industry member and Head of the Department.

Phase Activity Weightage I Synopsis, Preliminary report for the approval of selected topic along 20% 5th week with literature survey, objectives and methodology. II Mid-term progress review shall check the compliance with the 10 th week objectives and methodology presented in Phase I, review the work 40% performed. III Oral presentation, demonstration and submission of project report. 40%

Scheme and Syllabus – 2016 Admission Batch Page 65 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

15 th week After this presentation, the student will have one week time to correct / modify his report to address the issues raised by the committee members.

CIE Evaluation shall be done with marks distribution as follows: • Selection of the topic & formulation of objectives 10% • Design and simulation/ algorithm development/experimental setup 25% • Conducting experiments / implementation / testing / analysis 25% • Demonstration & Presentation 20% • Report writing 20%

Scheme for Semester End Evaluation (SEE): The evaluation will be done by ONE senior faculty from the department and ONE external faculty member from Academia / Industry / Research Organization. The following weightages would be given for the examination. Evaluation will be done in batches, not exceeding 6 students. 6. Brief write-up about the project 5% 7. Formulation of Project Objectives & Methodology 20% 8. Experiments / Analysis Performed; Results & Discussion 25% 9. Report 20% 10. Viva Voce 30%

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 H H H M L M L ------CO2 ------L ------M H ------CO3 ------L M M ------H --- CO4 ------L M H M ------H

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H L CO2 L H CO3 M H CO4 H H

Scheme and Syllabus – 2016 Admission Batch Page 66 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

SEMINAR Course Code : 16MRM42 CIE Marks : 50 Hrs/Week : L:T:P:S 0:0:4:0 SEE Marks 50 Credits : 2 SEE Duration 30 min Course Learning Objectives (CLO): This course will enable student to: 1. Understand the technological developments in their chosen field of interest 2. Explain the scope of work and challenges in the domain area 3. Analyze these engineering developments in the context of sustainability, societal concerns and project management. 4. Improve his/her verbal presentation and report writing skills GUIDELINES 1. The presentation will have to be done by individual students. 2. The topic of the seminar must be in one of the thrust areas with in-depth review and analysis on a current topic that is relevant to industry or on-going research. 3. The topic could be an extension or complementary to the project topic. 4. Topics could be in multidisciplinary areas and strongly address the technical design issues. 5. The student must be able to highlight or relate these technological developments with sustainability and societal relevance. 6. The students must mandatorily address legal, ethical issues as related to the topic of study. 7. The student shall make an attempt to perform financial / cost analysis or apply project management tools as related to his/her topic of study. 8. Each student must submit both hard and soft copies of the presentation.

Course Outcomes: After going through this course the student will be able to: CO1: Identify topics that are relevant in the present context of the world and relate it to sustainability and societal relevance. CO2: Perform literature/market/product survey and analyse information to the field of study. CO3: Enhance presentation and report writing skills. CO4: Develop creative thinking abilities. Scheme of Continuous Internal Evaluation (CIE): Evaluation would be carried out in TWO phases. The evaluation committee shall comprise of TWO senior faculty members. The evaluation criteria shall be as per the rubrics given below: Scheme for Semester End Evaluation (SEE): The evaluation will be done by ONE senior faculty from the department and ONE external faculty member from Academia / Industry / Research Organization. The following weightages would be given for the examination. Evaluation will be done in batches, not exceeding 6 students. Rubrics for Evaluation: • Topic – Technical Relevance, Sustainability and Societal Concerns 15% • Literature Review 25% • Presentation Skills 35% • Report 25%

Scheme and Syllabus – 2016 Admission Batch Page 67 of 42

Department of Telecommunication Engineering M. Tech – RF and Microwave Engineering

Mapping of Course Outcomes (CO) to Program Outcomes (PO)

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 CO1 --- H M M L H H ------M CO2 L M ------H --- CO3 ------L M H ------CO4 --- L M --- H H ------H

Mapping of Course Outcomes (CO) to Program Specific Outcomes (PSO)

PSO1 PSO2 CO1 H L CO2 M H CO3 M L CO4 H L

Scheme and Syllabus – 2016 Admission Batch Page 68 of 42