DOCSLIB.ORG

An Audio Amplifier Is the Heart of a Sound Reinforcement System in a Classroom

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
An Audio Amplifier Is the Heart of a Sound Reinforcement System in a Classroom Best Practices for Selecting Classroom Amplifiers An audio amplifier is the heart of a sound reinforcement system in a classroom. The amplifier takes the line level signal produced by the source device, amplifies and distributes it to the speakers throughout the room. It is important to note that an amplifier will only be required for speakers that are not self amplified. Self amplified speakers will typically have line level audio inputs, such as RCA or 3.5mm. Speakers that require an audio amplifier will typically have speaker wire connection as inputs. Selecting the proper amplifier helps to ensure that the audio system performs to its maximum potential. There are many factors that must be considered when selecting the proper amplifier for an installation. Size of Room The size of the room is one of the most obvious considerations when selecting an amplifier. An amplifier that is designed for a typical classroom, typically 90ft2, would not be appropriate for an auditorium that is 900ft2. One of the main differences between the amplifiers for these different size rooms is the power output. For a typical classroom a power output of 40 to 50 watts is more than sufficient, whereas an amplifier with a power output of 500 to 1000 watts is better suited for an auditorium. While it is possible to use an amplifier that has more power than is needed within a classroom, this would incur an unnecessary expense. Audio Inputs The audio inputs on an amplifier are an important consideration because they impact the ease of installation. Many classrooms now integrate a microphone system for the teacher, in addition to a separate audio playback source such as a DVD or Blu-ray player. If an audio amplifier has only a single audio input, then a separate audio switch must be used to accommodate the extra device. This is not only an added expense, but also provides a potential point of failure in the audio system. The ideal solution is to have the same number of inputs on the amplifier as the audio source devices being used. Connection style is another consideration. Some amplifiers accept standard audio connectors, such as 3.5mm or dual RCA, as an input. Other models are only able to accept bare wire connections as an input. There are advantages and disadvantages to both connection styles. Amplifiers that accept the audio connectors as an input provide the advantage of an easier installation and a lower probability of an electrical short. The disadvantage is that the connectors take up added space in a plenum box which will leave less space for additional equipment. The advantages to bare wire connection styles are a more secure connection and a smaller footprint within the installation location. The disadvantage of a bare wire connection style is a more difficult installation process and the increased likelihood of an electrical short because of the exposed conductor. This probability may be reduced by properly preparing the cable before making the connection to the amplifier. However, this preparation increases installation time and may increase cost. Fire Rating In many classroom installations the amplifier is installed within an environment such as a plenum air space. The National Electrical Code (NEC), as well as local building and fire codes, mandates that cables and devices installed within this environment meet fire ratings designed to protect the occupants of a building in the event of a fire. Amplifiers that meet these requirements are typically clearly marketed as “plenum rated”. One important point to consider is that although the amplifier itself may be plenum rated, that does not mean that all components of the amplifier meet plenum requirements. As an example, power supplies are not typically plenum rated. Most manufacturers who produce a plenum rated amplifier provide a non-plenum rated power adapter. This means that the power adapter for the amplifier must either be installed within a plenum fire box, or outside of the plenum environment. Following these requirements when installing a plenum amplifier helps avoid the potential of serious injury or death in the event of a building fire. Consult local building codes and the NEC before installing an amplifier. 3555 Kettering Blvd. Moraine, OH 45439 | 800.287.2843 | www.cablestogo.com Features Many classroom amplifiers offer additional features that provide cost savings or protection for the amplifier. An auto-shutdown capability allows the amplifier to power down when there is no audio signal detected. This allows for power savings when the amplifier is not in use and may extend the life of the amplifier. Many amplifiers also offer over current protection. This shuts down the amplifier before it is damaged in situations where the audio system pulls more current than the amplifier was designed to support. This feature can save an amplifier from irreparable damage and help prevent the possibility of a fire. These situation exist may exist if the speakers are wired incorrectly or during a power surge. Selecting the appropriate amplifier helps avoid unnecessary expense, eases the installation process, and ensure that the building and fire codes required for the installation environment are met. Additional features provided by many amplifiers give the added benefit of cost savings and protect the amplifier from damage. These considerations will allow for the selection of an amplifier that will provide the best performance of the sound reinforcement system within the classroom and the best experience for both students and teachers. 3555 3555Kettering Kettering Blvd. BlvdMoraine,. Moraine, OH 45439 OH 45439 | 800.287.2843 | 800.287.2843 | www.cablestogo.com | www.cablestogo.com 3555 Kettering3555 Kettering Blvd. Moraine, Blvd. Moraine, OH 45439 OH 45439| 800.287.2843 | 800.287.2843 | www.cablestogo.com | www.cablestogo.com .
Load more

Recommended publications
  • Model ST-PH1 Phono Preamplifier
    ® STICK-ON SERIES Model ST-PH1 Phono Preamplifier ANYWHERE YOU NEED A... · Stereo or Mono Phono Preamplifier. · Preamplifier with Balanced or Unbalanced Output · Preamplifier with Hi or Low-Impedance Output · Accurate, Low Noise Preamplification You Need The ST-PH1! The ST-PH1 is part of a group of products in the STICK-ON series from Radio Design Labs. The durable bottom adhesive permits quick, permanent or removable mounting nearly anywhere or it may be used with RDL’s STR-19A or STR-19B racking adapter for rack mounting! The ST-PH1 gives you the advantages of a high quality, low-noise phono preamplifier with a big plus, you can put it where you need it! The ST-PH1 is a stereophonic phono preamplifier. Each of the channel circuits is identical. The ST-PH1 has standard 47 kW impedance unbalanced phono cartridge inputs. Each output drives either a balanced or unbalanced line. Equalization follows the RIAA curve. The output is capable of driving into either high or low impedance loads. The output may be connected either balanced or unbalanced. The ST-PH1 features superior circuitry, which produces the unsurpassed pure clarity for which Radio Design Labs products are known! Some features are: · Input matched to standard cartridges used in the industry. · Impeccable audio quality. · Ultra-low distortion and noise. · Output levels adjustable (Independent adjustment for left and right channels). · Ample headroom at operating level. · Outputs short circuit protected. · Positive connections via barrier block, no audio connectors to wire. Although some equipment has phono inputs, optimum system performance is obtained when phonographs are preamplified as close to the turntable as possible, and then the line level signals are fed to the next piece of equipment in the chain.
    [Show full text]
  • Dpdb Passive Direct
    Thank you for purchasing the ART Dual Passive Direct Box. This rock solid, roadworthy DI Box is a dual version of our popular PDB. It allows for the connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles. The dPDB also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer via the dPDB. Features: 1. Switchable Input Attenuation * 0dB for electric guitar and bass pickups * -20dB for line level signals, such as keyboards and CD players * -40dB for speaker feeds 2. 50k Ohm Instrument Input The dPDB matches the signal level and impedance with unity gain, without any adverse effects on the source signal. 3. Parallel Link jack The 50k ohm parallel link jack output enables you to connect the output from the dPDB directly to power amplifiers without a separate preamplifier. 4. 600 Ohm XLR Output Jack The 600 ohm XLR output jack enables you to send a balanced signal to a mixing console. 5. Switchable Ground Lift A switchable ground lift is provided to help eliminate hum caused by ground loops. 6. Stereo Output Capabilities Perfect for various stereo applications such as keyboard(s) or guitar(s). Applications: 1. Electric guitar and bass pick up output signals The high impedance signal from a guitar or bass guitar pickup is translated by the dPDB into a low impedance balanced signal required by mixing consoles. Suggested setting – set the input attenuation to 0dB. 2. Keyboards and line level signals The dPDB automatically balances and matches the line level outputs of modern electronic keyboards.
    [Show full text]
  • Gain Staging and Analog Output Levels
    Application Note Gain Staging and Analog Output Levels This paper seeks to clarify questions regarding analog input audio from one place to another, a digital system—regardless and output levels when using digital transport systems and of its manufacturer—is comprised of multiple active electronic how these devices can be used effectively for a range of circuits (at minimum, one at input and another at output). The applications. devices in a digital snake should be thought of as additional circuits in the signal chain—along with the mixing console, mic preamps, effects processors, DSP, amps, and so on. Looking At LeVeL ACroSS the SignAL FLoW Some users have connected their system and then asked why In all of these devices, there is no expectation that the input there’s “signal loss” from analog input to analog output. Com- signal and the output signal match, and the industry is full of ing from a world of largely lossless analog wires, users expect gear with input and output specs that are different from one to see a signal move from one place to another without much another. Unfortunately, input and output level specifications change in level. are not standardized. But it’s essential to remember that, while both analog cables and digital snakes perform the same basic function of moving Source Destination Output +4dBu Input Source A typical analog signal path using copper wire Destination Output +4dBu Input This diagram above shows a typical analog signal path using nation device—no processing occurs in the copper wire con- copper wire. The source device in this example is outputting necting the two devices.
    [Show full text]
  • EON10 G2 User Guide
    EON10 G2 User Guide Part Number: 981-00061-01 Contents PACKAGE CONTENTS . .4 AGENCY APPROVALS AND CERTIFICATIONS . .4 BEFORE YOU BEGIN - IMPORTANT INFORMATION . .4 Mounting / Suspending EON Speakers . .4 Care and Maintenance . .5 Stand Mounting and Precautions . .5 Electrical Safety . .5 ABOUT THE EON10 G2 . .6 Applications . .6 Features . .6 Specifications . .6 Frequency Response . .7 BLOCK DIAGRAM . .7 Available Accessories . .7 QUICKSTART . .8 CONTROLS AND CONNECTIONS . .8 Connectors . .8 Switches . .9 Controls . .9 Indicators . .10 VOLTAGE SELECTION AND FUSES . .10 APPLICATION EXAMPLES . .11 One Piece PA System . .11 Basic Sound Reinforcement System With Stage Monitors . .12 DJ or Sound Reinforcement System with EONSUB G2 . .12 DJ System with Passive Subwoofers . .13 TROUBLESHOOTING . .13-15 REFERENCE . .16 Gain Structure . .16 Connections - Balanced and Unbalanced . .17 Loudspeaker Placement and Mounting . .17 Cables and Connectors . .18-19 JBL LIMITED WARRANTY & CONTACT INFORMATION . .20 3 Welcome Welcome to the family of discerning sound equipment users who have selected JBL Professional loud- speakers. EON is a creation of JBL, the world leader in sound reinforcement. JBL sound systems are used in some of the world’s most famous arenas, concert halls and clubs. In fact, JBL speakers are the premier choice for today’s hottest touring acts and artists.You just can’t make a more professional choice. This User Guide contains important information that will help you get the most from your JBL EON loud- speakers so please take a moment to read it and be sure to keep it in a safe place for future reference. Congratulations and thanks from all of us at JBL Professional.You have invested in the best portable per- formance system available.
    [Show full text]
  • IC-2 Specifications Sheet
    SPECIFICATION DATA Presentation-style conferences for up to 14 languages, where a floor and a single relay language are used. IC-2 Interpreter Control Console The Williams Sound IC-2 is an audio control center for simultaneous interpretation of one or more languages. As a stand-alone unit, it allows one or two interpreters to monitor floor or relay sources, activate microphone inputs, and route the interpretation signal to one of two language groups. Ideal for presentation-style conferences for up to 14 languages, where a floor and a single relay language are used. Can be used with Williams Sound FM, IR and Digi-Wave™ transmitters for portable or fixed installations. Designed to meet international standards for portable interpretation consoles. Features • CAT5 audio bus offers simplified cabling, easy cascading to support additional interpreters. • Built-in distribution amplifier and mini mixer reduce the need for external equipment and greatly simplify setup. • Floor language feed-through • Interlocking microphone and CH2 (relay) output functions • Soft-touch buttons provide for smoother, quieter operation • Enhanced flexibility, providing each interpreter with multiple microphone and headset options • Individual volume and tone controls ensure optimal listening levels • Five-year warranty © 2019, Williams AV, LLC MCAT 091J IC-2 Interpreter Control Console BASS TREBLE BASS TREBLE VOLUME VOLUME CH1 / CH2 CH1 / CH2 OUTPUT OUTPUT RELAY INPUT RELAY INPUT FLOOR INPUT MIC ON MIC ON FLOOR INPUT MUTE INTERPRETER (B) INTERPRETER (A) “CH2 IN USE”
    [Show full text]
  • Remoteamp Three User Guide
    RemoteAmp Three Portable Headphone Amplifier User Guide JK Audio Introduction JK Audio combines professional audio electronics in a rugged new belt pack design. RemoteAmp Three provides a listen only connection for IFB or full bandwidth audio monitoring. The XLR line level in- put accepts either a balanced mono signal or a one or two channel party line intercom feed (listen-only). The XLR source switch selects between balanced input and intercom monitoring. An integrated speaker is disabled when headphones or earphones are connected. There are separate volume controls for 2 channel party line monitoring. The high output 1/4” headphone jack will cut through any crowd noise. Connect a mono IFB earpiece or stereo headphones to the 3.5 mm earpiece jack. RemoteAmp Three contains a headphone amplifier that is more powerful than a consumer product. JK Audio products are designed for the broadcast industry. The broadcast professional must be able to hear headphone signals over the ambient noise level. From the cheering crowd at a football game to track- side at a car race, the program material or cues must be heard at high volumes without distortion. 2 Table of Contents Introduction . 2 Features Front . 4-5 Rear . 6-7 Power Options . 8 Jumper Settings . 9 FAQs . 10-11 Block Diagram . 12 Specifications . 13 Warranty . 16 3 Features—Front 1 2 3 4 5 6 4 Features—Front 1. This built-in speaker lets you hear audio with- out connecting headphones. 2. This control will adjust the level of audio from Channel A of the XLR Line In jack when the selector switch is in the Intercom position.
    [Show full text]
  • Radial JDV Mk5 Super DI
    ® True to the Music JDV™ Mk5 Active Direct Box User Guide ® True to the Music www.radialeng.com Radial Engineering Ltd. 1588 Kebet Way, Port Coquitlam British Columbia, Canada, V3C 5M5 tel: 604-942-1001 • fax: 604-942-1010 email: [email protected] www.radialeng.com This page left blank. ® True to the Music Radial ® JDV ™ Mk5 Active Direct Box Table of Contents Page Feature set ..............................................................................................................1-2 Overview.....................................................................................................................3 Pickup or instrument source options ..........................................................................4 Making connections .................................................................................................5-6 Selecting channels .....................................................................................................7 Using the JDV.............................................................................................................8 Blending the two channels..........................................................................................9 Setting the output controls ........................................................................................10 Rackmounting kit ...................................................................................................... 11 Specifications ..........................................................................................................
    [Show full text]
  • Owner's Manual
    OWNER’S MANUAL TABLE OF CONTENTS INTRODUCTION Introduction . 2 Congratulations on the purchase of your Sterling SHA4 Features . 2 Headphone Amplifier, a 4-way headphone amplifier Unpacking . 2 with 4 high-power headphone amplifiers assignable to 2 individual inputs . Dual front/rear connections, Important Safety Instructions . 2-3 integrated microphone stand adapter, and an internal Application Guidelines . 3 wide-range power supply make this unit suitable for a Controls and Connections . 4 large variety of applications in recording, live sound Functional Description . 5 and installation environments . Rear Connections . 5 Front Controls . 5 FEATURES Connections . 6 • 4 Channels — with 8 total headphone outputs (2 Operation . 7 per channel) Technical Specifications . 7 • Individual switchable input monitoring (A or B) Warranty . 8 • Stereo ¼” TRS and 3 .5mm mini connector (TRS) headphone outputs • Balanced ¼” (TRS) line level and unbalanced ¼” (TS) line level inputs • Stereo ¼” TRS ‘Link’ connectors for daisy chaining and/or external processing • Integrated mic stand mount for flexible integration in both studio and home recording • Integrated internal power supply eliminates obstructive wall-worts UNPACKING Please check that the box contains the following items: 1 pc . SHA4 main unit 1 pc . AC Power cable 1 pc . Operation manual If any part is missing, please contact your dealer immediately for replacement WARNING After unpacking, and before plugging the AC cord in the wall outlet, check whether the AC mains voltage and frequency is the same as this product is specified for (see rear panel of product) . Whenever the specified voltage or your AC plug should not match the local conditions, do NOT plug the AC cord into the wall outlet and contact your dealer immediately .
    [Show full text]
  • Hugo-User-Manual.Pdf
    Instruction Manual Hugo Portable Headphone amplifier with Advanced DAC Thank you for purchasing the Chord Hugo. In order to get the most from your product please, take a few moments to read these instructions. Hugo is an advanced portable headphone amplifier. It features a state of the art FPGA DAC design with our latest WTA filter algorithm. Hugo supports PCM formats up to 384kHz including DXD. It will also natively play DSD64 and DSD128 in DoP format. Powered by rechargeable batteries for many hours of playback, Hugo is totally portable and will work wirelessly via Bluetooth or can be connected via micro USB to give a direct digital audio signal as found on many portable devices. Hugo can also be used as a standalone DAC with RCA phono outputs to connect into a HiFi system. Coaxial and optical digital inputs will connect to a variety or source components. There is an advanced volume control which can be bypassed for line level operation. Hugo is a truly versatile audio component to enhance your listening experience. Get to know Hugo Hugo features several different inputs and output connections. Please choose the one that suits your source components. Input Crossfeed SD USB HD USB Power switch switch switch Chord Electronics Limited Chord Electronics Limited 6.35mm 3.5mm RCA Phono 3.5mm Coax Optical jack jack connection jack Operation Turn on the power switch to the right. Hugo will cycle through the sequence of colours and then be ready for operation. Select the input you wish to use and plug in your input cables and headphones, as appropriate.
    [Show full text]
  • Basic Audio Terminology
    Audio Terminology Basics © 2012 Bosch Security Systems Table of Contents Introduction 3 A-I 5 J-R 10 S-Z 13 Wrap-up 15 © 2012 Bosch Security Systems 2 Introduction Audio Terminology Are you getting ready to buy a new amp? Is your band booking some bigger venues and in need of new loudspeakers? Are you just starting out and have no idea what equipment you need? As you look up equipment details, a lot of the terminology can be pretty confusing. What do all those specs mean? What’s a compression driver? Is it different from a loudspeaker? Why is a 4 watt amp cheaper than an 8 watt amp? What’s a balanced interface, and why does it matter? We’re Here to Help When you’re searching for the right audio equipment, you don’t need to know everything about audio engineering. You just need to understand the terms that matter to you. This quick-reference guide explains some basic audio terms and why they matter. © 2012 Bosch Security Systems 3 What makes EV the expert? Experience. Dedication. Passion. Electro-Voice has been in the audio equipment business since 1930. Recognized the world over as a leader in audio technology, EV is ubiquitous in performing arts centers, sports facilities, houses of worship, cinemas, dance clubs, transportation centers, theaters, and, of course, live music. EV’s reputation for providing superior audio products and dedication to innovation continues today. Whether EV microphones, loudspeaker systems, amplifiers, signal processors, the EV solution is always a step up in performance and reliability.
    [Show full text]
  • DMP3 User Guide
    DMP3 Dual mic preamp / direct box User Guide Introduction Thank you for purchasing the M-Audio DMP3 Microphone/Instrument Pre-Amplifier. The DMP3 gives you two completely independent channels of high gain, ultra low noise pre-amps in a sturdy desktop unit. Each channel provides low impedance microphone inputs on XLR connectors with optional phantom power, plus an alternate high impedance instrument input on 1/4" TS jacks. The DMP3 outputs can be used as balanced or unbalanced via its 1/4” TRS jacks. Microphones, guitars with magnetic or piezo pickups, and any instrument that needs a boost in gain to "line level" will benefit from the superior sonic quality of the DMP3. Two separate gain ranges are conveniently selectable from the front panel for each DMP3 channel. Low cut "rumble" filters for each channel eliminate unwanted low-end noise, while individual phase inversion switches ensure that you will always achieve the greatest result when using the DMP3 in a stereo or dual mic situation. Large, classic VU meters give an excellent visual representation of the DMP3 output levels. DMP3 Features • 2 independent XLR, fully balanced mic inputs. • 2 alternate, independent 1/4” unbalanced, high impedance inputs, impedance matched for ideal performance with electric and acoustic guitars and other high impedance mics or instruments. • Each preamp channel provides two gain ranges to accomodate a variety of output levels from microphones and instruments. • Exceptional frequency response, extremely flat throughout all frequencies. • Separate low-cut filters for each channel with switch and LED indicator. • Separate gain controls for each of the pre-amplifiers.
    [Show full text]
  • Audio Cables Line Level Speaker Level Digital Level INPUTS SIGNAL PROCESS OUTPUTS
    2011 Audio Cables Line Level Speaker Level Digital Level INPUTS SIGNAL PROCESS OUTPUTS Speakers Microphones Amps Equalizer Effects Amps WEST PENN WIRE Board Equalizer Trak Deck Trak Amps Crossover Bass Driver Disc CDR Matrix Mixer Sampler MIC/ LINE LEVEL CABLES SPEAKER LEVEL CABLES WEST PENN WIRE NON-PLENUM WEST PENN WIRE NON-PLENUM (X) 454 224 225 77291 226 227 77293 C210 C208 WEST PENN WIRE PLENUM WEST PENN WIRE PLENUM D25454 25224B 25225B CABLE WITH CONFIDENCE WEST PENN WIRE DUAL NON PLENUM 25226B 25227B 210454 ANALOG AUDIO CABLES: AUDIO RANGE 20Hz to 20 KHz. 20 Hz- Lowest Audible Frequency 440Hz- A on the piano (A4) 4186Hz- Top key on a Piano (C8) 20KHz- Highest Audible Frequency + Amplitude Time - 1 Second 2 Hz Analog audio is a sin wave with an amplitude, time, and frequency. Analog Audio Level Categories: 1. Microphone Level a. Portable, b. Permanent 2. Line Level a. Professional, b. Consumer 3. Speaker Level a. High Impedance, b. Low Impedance WEST PENN WIRE CABLE WITH CONFIDENCE ANALOG AUDIO CABLES: Decibel-l 1/10th of a Bel- Basic Unit of measure in Audio Signals 1dB is the smallest change detectable by the human ear. -10dB change is subjectively about twice as loud or soft. The Decibel is logarithmic because the human ear is logarithmic in response to sound. A logarithm makes dealing with the audio range of numbers involved in amplifier power, sound levels and mic levels much easier to deal with. Decibel in Audio Applications: dB= 10 log (P1/P2).- P- power dBu- Referenced to volts without regards to Impedance- u- unloaded ( no devices attached) 0dBu is always .775Volts dBm- is refers to a standard level of 1 milliwatt dBV- Voltage referenced to 1 Volt without regards to impedance.
    [Show full text]