Plumbing Fixture Schedule Rough-In Connections Tagfixture Manuf

PLUMBING FIXTURE SCHEDULE ROUGH-IN CONNECTIONS TAGFIXTURE MANUF. MODEL ACCESSORIES SUPPLIES TRAP HEIGHT CW HW WASTE VENT REMARKS ADA TANK TYPE FLOOR MOUNT WC-1 WATER CLOSET KOHLER K-3609 CIMARRON SEAT - CHURCH 295SSC - INTEGRAL 18" 1/2" - 4" 2" TANK TYPE FLOOR MOUNT WC-2 WATER CLOSET KOHLER K-3609 CIMARRON SEAT - CHURCH 295SSC - INTEGRAL 18" 1/2" - 4" 2"

UR-1 ADA WALL HUNG URINAL KOHLER K-4904-ET BARDON FLUSH VALVE - SLOAN 186-1.0 - INTEGRAL 17" 3/4" - 2" 1-1/2" 3 LOOSE KEY LAV-1 ADA WALL HUNG LAVATORY KOHLER K-2005 KINGSTON MOEN 8413F05 CHROME CHROME TRAP 34" 1/2" 1/2" 1-1/2" 1-1/2" 3 LOOSE KEY LAV-2 WALL HUNG LAVATORY KOHLER K-2005 KINGSTON MOEN 8413F05 CHROME CHROME TRAP 31" 1/2" 1/2" 1-1/2" 1-1/2" 3 830-AA FAUCET, 889-CC BRACKET, E-77-AA MS-1 MOP SERVICE SINK FIAT MSB-2424 GUARDS, 832AA HOSE BALL VALVES PVC FLOOR 1/2" 1/2" 3" 1-1/2"

SH-1 ADA SHOWER MOEN T8346, T8371HD 2.5 GPM FLOW CONTROL, SUPPLY STOPS INTEGRAL FLOOR DRAIN HEAD 6'-0" 1/2" 1/2" - - 2

FD-1 FLOOR DRAIN JR SMITH 2005-A-NB ROUND - - PVC FLOOR - - 2" 1-1/2" 1, 4 CAST IRON NSF 8" DEEP FLOOR FS-1 SINK JR SMITH 3410Y-13 3/4 GRATE - PVC FLOOR - - 3" 1-1/2" 1, 4 REMARKS: GENERAL: INSTALL ADA FIXTURES PER LATEST ADA STANDARDS. INSTALL FLUSH VALVES WITH HANDLES TOWARD THE WIDE SIDE OF THE STALL. PROVIDE ADA SINKS AND LAVATORIES WITH INSULATED TRAPS, STOPS AND SUPPLIES. PROVIDE CHROME PLATED COMMERCIAL GRADE STOPS AND SUPPLIES. 1. VERIFY EXACT LOCATION OF DRAIN WITH THE ARCHITECT/GENERAL PRIOR TO INSTALLATION. 2. PROVIDE SHOWER VALVE WITH SINGLE LEVER PRESSURE BALANCED VALVE, INTEGRAL STOPS, TEMPERATURE LIMIT STOPS, HAND HELD SHOWER, 30" SLIDE BAR, 69" HOSE. 2.5 GPM FLOW. 3. PROVIDE WITH FLOOR CARRIER 4. PROVIDE TRAP PRIMER PORT. PROVIDE TRAP PRIMER VALVE WITH DISTRIBUTION UNIT. CONNECT UP TO FOUR DRAINS TO ONE TRAP PRIMER. CAP ANY UNUSED CONNECTIONS. PROVIDE BALL VALVE AND TOP PIPE CONNECTION FOR EACH VALVE. Cimarron® Comfort Height® Toilet K-3609 Features • Vitreous china. • Two-piece toilet. • Comfort Height® Elongated bowl. • AquaPiston® flushing system. • Includes left-hand polished chrome trip lever. • 1.28 gpf (4.8 lpf). • 2-1/8" (54 mm) fully glazed trapway. • 12" (305 mm) rough-in. • Less seat and supply. • 10-1/2" (267 mm) x 7-1/8" (181 mm) water area. • 28-3/4" (730 mm) x 17-5/8" (447 mm) x 30-3/4" (781 mm). • Floor mount / Floor outlet. Recommended Accessories K-4650 Toilet Seat K-7637 Angle Supply with Stop (single) Components CSA B651 OBC Product includes: K-4309 Elongated Toilet Bowl Codes/Standards K-4421 Toilet Tank ASME A112.19.2/CSA B45.1 Additional included component/s: Tank cover, Trip lever, Bolt DOE - Energy Policy Act 1992 cap accessory pack, and Tank accessory pack. EPA WaterSense® ADA ICC/ANSI A117.1 CSA B651 OBC

KOHLER® One-Year Limited Warranty See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only. Color Code Description 0 White 96 Biscuit 47 Almond NY Dune 95 Ice™ Grey G9 Sandbar 7 Black Black™

USA/Canada: 1-800-4KOHLER (1-800-456-4537) www.kohler.com 5-23-2015 08:10 Cimarron® Comfort Height® Toilet K-3609

For Back-to-Back Installations

Technical Information Notes All product dimensions are nominal. Install this product according to the installation guide. Toilet type: Two-piece Bowl shape: Elongated front For back-to-back toilet installations: Use only a 45° double wye fitting. Flush type: AquaPiston Trap passageway: 2-1/8" (54 mm) ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations. Water Consumption Full: 1.28 gpf (4.8 lpf) The Model Plumbing Codes require the Water surface size: 10-1/2" x 7-7/8" (267 mm x 200 mm) installation of elongated open-front toilet seats on public bathrooms. Rim to water surface: 6-3/8" (162 mm) Rough-in: 12" (305 mm) Seat-mounting holes: 5-1/2" (140 mm)

USA/Canada: 1-800-4KOHLER (1-800-456-4537) www.kohler.com 5-23-2015 08:10 COMMERCIAL PLASTIC SEATS MODEL 295C

• ELONGATED SEAT, OPEN FRONT LESS COVER

S E R I E S • SOLID PLASTIC

• POSTUREPEDIC CONTOUR DESIGN

• CONCEALED 300 SERIES STAINLESS STEEL CHECK HINGES

5 1/2" Seats shall be No. ______as manufactured by Church Seats. Seats shall be heavy weight and injection-molded of solid plastic. Seats shall be open front less cover for elongated bowl and feature exclusive Posturepedic contour design and four large molded-in bumpers. Concealed check hinges to feature 300 Series stainless steel posts that 18 1/2" 7 7/8" 19" stop seat 11 degrees beyond vertical. Uses 300 Series stainless steel hardware. Color to be . (specify white or fixture manufacturer’s color) Hinges shall be . (specify hinge type) 3 1/4"

14 1/4"

Ring thickness is 13/16" 295C Concealed check hinge stops seat 11° beyond vertical. Ring thickness including the bumper is 1" 295SSC Self-sustaining, concealed stainless steel check hinge holds seat in any raised position Height of Seat is 2-1/4" up to 11° beyond vertical.

Church Seats, Sheboygan Falls, WI 53085 Phone: 920-467-2664 800-233-7328 Fax: 920-467-8573 www.ChurchSeats.com Bardon™ 1/8th GPF High Efficiency Urinal (HEU) K-4904-ET Features • Vitreous china. • Washout flushing action. • 3/4" top spud. • 14-1/8" (359 mm) extended rim. • 0.125 gpf (0.47 lpf) to 1.0 gpf (3.8 lpf). • WaterSense® compliant when used with WaterSense flushometer. • Will replace K-4960-ET urinal. • 26-7/8" (683 mm) x 18" (457 mm) x 14-1/8" (359 mm) Recommended Accessories K-10668 WaterSense® 0.125 gpf Exposed Flushometer K-10949 Tripoint™ DC 1/8 GPF Urinal Flushometer K-13520 WaterSense® 0.125 gpf Exposed Flushometer K-10675 WAVE DC 0.5 GPF Urinal Flushometer K-10958 Tripoint™ DC 0.5 GPF Urinal Flushometer K-13519 0.5 gpf Exposed Flushometer K-10676 WAVE DC 1.0 GPF Wshdwn Flushometer K-10960 1.0 gpf Exposed Flushometer K-13518 1.0 gpf Exposed Flushometer Codes/Standards Components ASME A112.19.2/CSA B45.1 EPA WaterSense® Additional included component/s: 3/4" inlet spud, 2" outlet spud, ADA Strainer, and Hangers (2). ICC/ANSI A117.1

KOHLER® One-Year Limited Warranty See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only. Color Code Description 0 White 96 Biscuit 47 Almond 7 Black Black™

USA/Canada: 1-800-4KOHLER (1-800-456-4537) www.kohler.com 5-23-2015 04:47 Bardon™ 1/8th GPF High Efficiency Urinal (HEU) K-4904-ET

21"

Technical Information Notes All product dimensions are nominal. Install this product according to the installation guide. Spud size: 3/4" ADA compliant when installed to the specific requirements of these regulations.

USA/Canada: 1-800-4KOHLER (1-800-456-4537) www.kohler.com 5-23-2015 04:47 merica merica A n A n

y A y A

u c u c

t t ®

B B

•

• Sloan Model • •

C C o t o t m plia n m plia n Flushometer 186

u Description Exposed Urinal Flushometer for ¾” top spud urinals. u Flush Cycle £Model 186 Water Saver (1.5 gpf/5.7 Lpf) £Model 186-1.0 Low Consumption (1.0 gpf/3.8 Lpf) u Variations £ DFB Dual Filtered Fixed Bypass Diaphragm u Specifications Quiet, Exposed, Diaphragm Type, Chrome Plated Urinal Flushometer with the following features: • High Chloramine Resistant PERMEX™ Synthetic Rubber Diaphragm with Linear Filtered Bypass and Vortex Cleansing Action™ • ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle Packing •¾” I.P.S. Screwdriver Bak-Chek™ Angle Stop • Vandal Resistant Stop Cap • Adjustable Tailpiece • Vacuum Breaker with Flush Connection • Spud Coupling and Spud Flange for ¾” Top Spud • Sweat Solder Adapter with Cover Tube and Cast Wall Flange • High Copper, Low Zinc Brass Castings for Dezincification Resistance • Non-Hold-Open Handle and No External Volume Adjustment to Ensure Water Conservation • Low Consumption flush accuracy • Handle Packing, Stop Seat and Vacuum Breaker Molded from PERMEX™ Rubber Compound for Chloramine Resistance Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037. u Accessories See Accessories Section of the Sloan catalog for details on these and other Flushometer variations.

Certified

This space for Architect/Engineer approval

The information contained in this document is subject to change without notice.

SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL 60131 Sloan 186 S.S. — Rev. 0d (06/10) Ph: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 Copyright © 2010 SLOAN VALVE COMPANY www.sloanvalve.com Kingston™ Wall-Mount Bathroom Sink K-2005 Features • With hanger. • With overflow. • 4" (102 mm) centers. • 21-1/4" (540 mm) x 18-1/8" (460 mm). Material • Vitreous china. Installation • Wall-mount Recommended Accessories K-8998 P-Trap Components Additional included component/s: Hanger. CSA B651 OBC Codes/Standards ASME A112.19.2/CSA B45.1 ADA ICC/ANSI A117.1 CSA B651 OBC

KOHLER® One-Year Limited Warranty See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only. Color Code Description 0 White 96 Biscuit 47 Almond 7 Black Black™

USA/Canada: 1-800-4KOHLER (1-800-456-4537) www.kohler.com 5-23-2015 05:21 Kingston™ Wall-Mount Bathroom Sink K-2005

Concealed Arm Hole Locations

Technical Information Notes All product dimensions are nominal. Install this product according to the installation guide. Bowl configuration: Single Installation: Wall-mount ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations. Bowl area (Only) Length: 16" (406 mm) Width: 10" (254 mm) Water depth: 3-1/8" (79 mm) Number of deck holes: 3 Soap/Lotion hole: 1-1/4" (32 mm) Drain hole: 1-3/4" (44 mm)

USA/Canada: 1-800-4KOHLER (1-800-456-4537) www.kohler.com 5-23-2015 05:21 S p e c i f i c a t i o n s C O M M E R C I A L

DESCRIPTION • Solid brass construction • Chrome, Brushed Chrome or Brushed Nickel finish • 1/2" IPS connections • Solid brass waterways OPERATION • Lever handle • Temperature controlled through 110˚ arc of handle FLOW • Standard aerator is limited to 2.2 gpm max. (8.3 L/min) Single Handle Lavatory Faucet CARTRIDGE • Ceramic disc cartridge *(with temperature limit stop) • Nonmetallic/nonferrous and ceramic material WATERSENSE STANDARDS MODEL FLOW (gpm) DRAIN FINISH CERTIFIED • Third party certified to WaterSense® (only applies to 1.5 gpm), 8413 2.2 Without Chrome ASME A112.18.1/CSA B125.1, and all applicable requirements 8413F15 1.5 Without Chrome x referenced therein including NSF 61/9 8413F05 0.5 Without Chrome • Contains no more than 0.25% weighted average lead content 8413F03 0.35 Without Chrome • Complies with California Proposition 65 and with the Federal Safe 8414 2.2 Metal Chrome Drinking Water Act 8414BC 2.2 Metal Brushed Chrome • ADA for lever handles 8414BN 2.2 Metal Brushed Nickel WARRANTY • Warranted for 5 years against material or manufacturing defects

See table above NOTE: This faucet is designed to be in stalled thru 3 holes, 1" min. dia.

HOT COLD

55˚ 55˚ 7" (128mm) 6" (153mm)

6-5/8" 5-5/8" (168mm) (143mm)

2-1/2" 5" (64mm) (127mm)

1-1/8" MAX. (29mm)

2" 2" (51mm) (51mm) 2-7/16" (62mm) CRITICAL DIMENSIONS (DO NOT SCALE)

MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 Rev. 9/12 www.moen.com MOLDED-STONE® MSB 2424 MOP SERVICE BASIN MSB 3624

Molded-Stone® Mop Service Basin

FEATURES

• MSB 2424

The MSB 2424 shall have overall outside dimensions of 24” x 24” x 10”. The molding shall be done in matched metal dies under heat and pressure resulting in a one-piece homogeneous product. The unit shall have 10” high walls with not less than 1” wide.

The stainless steel drain body is designed to provide for a caulk connection or QDC-3 joint to a 3” drain pipe. A combination dome strainer and lint basket made from stainless steel shall be included with factory installed stainless steel drain body for caulked joint to accept a 3” pipe.

• MSB 3624

The MSB 3624 shall have overall outside dimensions of 36” x 24” x 10”. The molding NOTES shall be done in matched metal dies under heat and pressure resulting in a one-piece homogeneous product. The unit shall have 10” high walls with not less than 1” wide shoulders 9 and an integrally molded shelf 10 ⁄16” wide where indicated.

The stainless steel drain body is designed to OPTIONS provide for a caulk connection or QDC-3 joint to a 3” drain pipe. A combination dome strainer • Service Faucet (830-AA): Chrome plated with vacuum and lint basket made from stainless steel shall breaker, integral stops, adjustable wall brace, pail hook and be included with factory installed stainless steel 3 ⁄4” hose thread on spout. drain body for caulked joint to accept a 3” pipe. • Hose and Hose Bracket (832-AA) • Mop Hanger (889-CC) • Alternate Strainer (1453-BB) - For residential use (EFS-3624 and EFS-2424) • 3” Quick Drain Connector (QDC-3XH): Neoprene connecting gasket suitable for attaching extra heavy cast iron soil pipe and Schedule 40 steel pipe to the drain body. Neoprene connecting gasket (QDC-3SN) suitable for attaching hubless cast iron pipe (no hub, nominal O.D. of 3.31”) and service weight cast iron soil pipe (nominal O.D. of 3.38”) to the drain body. • Silicone Sealant (833-AA) • Vinyl Bumperguard (E-77-AA)

• Stainless Steel Bumperguard (E-88-AA) ¤ • Stainles Steel Wall Guard (MSG2424, MSG2828, MG3232, FIAT PRODUCTS MSG3636, and MSG3624) A CRANE PLUMBING COMP ANY

CR/PL© 04/03 Printed in U.S.A. MOLDED-STONE® MSB 2424 MOP SERVICE BASIN MSB 3624

Molded-Stone® Mop Service Basin

FIAT PRODUCTS ¤ A CRANE PLUMBING COMP ANY

1 IMPORTANT: Roughing-in dimensions may vary /2" and are subject to change or cancellation without prior notice. CR/PL© 04/03 Printed in U.S.A. Specifications C O M M E R C I A L DESCRIPTION • Metal and brass construction with Chrome plated finish, also in Classic Brushed Nickel (CBN) finish • Pressure balancing cycle valve • Contains: hand-held shower, with non-positive pause, 30" slide bar, drop ell, vacuum breaker, 69" metal hose and mounting hardware • Slide bar is NOT DESIGNED TO BE A GRAB BAR • Supplied with vandal resistant screws • Quick cleaning rubber nozzles OPERATION • Temperature valve has ADA compliant lever style handle • Handle operates counterclockwise through a 270° arc with off at 6 o'clock, and maximum hot at the 9 o'clock position. Shut off in clockwise direction • Adjustable temperature limit stop • Pressure balancing mechanism maintains selected discharge temperature to ± 3.6° • Single function spray pattern • Easy to operate pause button (reduces the flow of water to a trickle) FLOW T8346 (2.5gpm/9.5 lpm) - Chrome finish T8346CBN (2.5gpm/9.5 lpm) - CBN finish T8346EP15 (1.5gpm/5.7 lpm) - Chrome finish; WaterSense® Certified T8346EP15CBN (1.5gpm/5.7 lpm) - CBN finish; WaterSense® Certified Single-Handle Posi-Temp CARTRIDGE • Pair with a brass Posi-Temp rough-in valve: Handheld Shower System • 8370HD*: 1/2" CC connection without integral stops • 8371HD*: 1/2" CC connection with integral stops • 8372HD*: 1/2" IPS connection with integral stops Model: T8346, T8346CBN • 8373HD*: 1/2" PEX connection with integral stops • 8374HD*: 1/2" CPVC connection with integral stops • 8375HD*: 1/2" UPONOR connection with integral stops *Includes the 1222HD Brass Posi-Temp Cartridge • Accommodates back to back installations STANDARDS • Third party certified to WaterSense® (only applies to 1.5 gpm) ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein • ADA for lever handle WARRANTY • Warranted for 5 years against material or manufacturing defects

2" Dia. 1/2-14 NPT 1/2" MIN. CC (13mm) DROP ELL 5/8" MIN. IPS (16mm) 1/2-14 2" Diameter NPSL THREAD FINISHED 1/2-14 NPT 3/16" (21mm) - 2" (51mm) WALL LINE with optional adapter 8-1/8" (206mm) SPRAY WAND 1/2-14 DROP ELL 3-5/16" (85mm) HEIGHT NPSL THREAD SPRAY HEAD DIAMETER

7" (178mm) 2-1/2" MAX. ESC. DIAM. (63mm) Vacuum ESCUTCHEON 6'-6" Breaker (1981mm) 28-1/2" NOMINAL NOMIMAL H C C (723mm) L 4-1/2" (114mm) PLASTER GUARD 3" (76mm) DIRECTION OPENING OF HANDLE HANDLE MIN. WALL CAVITY ROTATION 45" (1143) 48" (1219mm) FLOOR LINE NOMINAL 6'-6" (1981mm) NOMINAL FINISHED WALL LINE

TUB RIM

FLOOR LINE

*Refer to (ADAAG) guidelines or local codes for proper ADA installation. CRITICAL DIMENSIONS

(DO NOT SCALE) MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158 Rev. 11/12 www.moen.com FIGURE DRAWN BY: CHECKED BY: APPROVED BY: DATE: SCALE: SIZE DRAWING NUMBER NUMBER 2005 PJ TD TD 5-17-85 NONE A S2005 Q DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA SMITH CUSTOMER floor level. ofsquareorstraight linepattern.finished inmaterial Reversible adjustmentofthestrainer tomeetfinished flashingcollarpermits The roundtopstrainer headisusedfor alltypesofpouredfinishedfloors. adaptable tofloorsthatare The squaretopisparticularly FUNCTION: DRIVEN ▲ (When Specified) Connection Trap Primer Position REV. XX-MIN 21/8 Addition to Variations M 10/24/06 Revised N 12/18/08 Variations P 11-20-09 Rev. Dwg., Var. Q 11-18-11 Low 02(50), only. 03(75)or04"(100)sizes Meets ASMEStandard A112.6.3-2001 parentheses areinmillimeters. NOTE: as Indicatedby SuffixLetterSelected. Collar andAdjustable Strainer Head Duco CastIronBodywithFlashing REGULARLY FURNISHED: ** •• positions. * • ▼ Collarisreversible toobtainextreme highandlow strainer MAX 1 1/4(32) Add 3/8"(10)toallmin/maxdimensionsfor roundstrainers. MIN63/4"(170)holerequiredfor application. coredrilled Notavailable for 5"(125)size strainer.

This dimension to internal stopofspeedi-setgasket. This dimensiontointernal ® Dimensions shown in TEL: 334-277-8520FAX: 334-272-7396 MONTGOMERY, ALABAMA36109-0237(USA) POST OFFICEBOX 3237 FAMILY ACORN’S OF COMPANIES MEMBER OF SMITH JAY R. DATE ▲ ▲ ▲ General service floor drain forGeneral service useinshowers, toilets, kitchensandotherfinishedareaswherefoot traffic isexpected. 04(100) Outlet 03(75) 02(50) Size Fig. 2005Y.……(B) SQUARE TOP Fig. 2005Y……(A)ROUND TOP NO-HUB toSPEEDI-SET FLOOR ORSHOWER DRAINS MFG. CO. NO-HUB OUTLET 08(205) DIAorSQ 06(150) DIAorSQ 05(125) DIAorSQ Nickel Bronze Strainer Head B DIAorSQ 9 (230)DIA DESCRIPTION WITH ADJUSTABLE STRAINERHEADS **6 3/4(170) A www.jrsmith.com ® A (PipeSize) =02(50),03(75),04(100),05(125)or06(150) ASPE •• -AHP (Round)or-BHP(Square) Heelproof Grate -HP T Threaded Outlet Fig. DX2005) Wide FlangedStrainer (Specify Vandal ProofScrews -U 1/2"(13)&-P0753/4"(19) Trap Connection-P050 Primer Sediment Bucket -B 2(50),3(75)&4"(100)only LXH Speedi-SetExtra Heavy 2(50),3(75)&4"(100)only L Speedi-SetService Weight Hinged Grate -H Flapper Type Backwater Valve -V VARIATIONS: ® Openings Seepage 4(100) X-MIN Position B C CR TBW MEMBER OF: High RN MAX N W BW RN BY J BW JJ ® CKD. BY

CL P

E v

Position N

XX-MIN n

G i

(When Specified) Connection Trap Primer n I S

A R

Low N N

E I

t T

h MAX e E A

r R

1 1/4(32) T R

h I Y DIA orSQ a POUNDS WEIGHT n N C Strainer G •10 (255) •09 (230) u 08 (205) 07 (180) 06 (150) 05 (125) re Size B Fig. 2005L……(B)SQUARE TOP Fig. 2005L……(A)ROUND TOP 2 3/8(60) 1 1/2(38) 2 3/8(60) 1 1/2(38) 2 1/2(64) 1 1/2(38) 2 1/4(57) 1 1/4(32) 2 1/4(57) 1 1/4(32) MAX 2 1/4(57) 1 1/4(32) MIN CUBIC FEET VOLUME LOCATION SPEEDI-SET OUTLET Position In High *Collar X Stainless Steel(SpecifyFig. 9700-A) Polished Bronze Strainer -PB Nickel Bronze Strainer -NB Galvanized CastIronBody-G Chrome PlatedStrainer -CP Bronze Body-BB OPTIONAL MATERIALS: B DIAorSQ 9 (230)DIA FIGURE NUMBER **6 3/4(170) (5 17/8(48) 1(25) 17/8(48) 1(25) 17/8(48) 1(25) 17/8(48) 7/8(22) 15/8(41) 3/4(19) MAX 15/8(41) 3/4(19) MIN A OPTIONAL STRAINERHEADS. SEE PM0457FOR Position *Collar In Low XX 2005 34) 16(103) 23(48) 16(103) 14(90) 18(116) 11(71) 17(110) 12.5(81) 14(90) 6.5(42) 9(58) 7(45) ON SQUARE ROUND Free Area ▼ (SQ CM)

SQ IN 2 5/8"(67) X-MIN Position Openings Seepage High MAX 4(100) SMITH® JAY R. LOCATION ® G ITA SMITH MFG. CO. AN RY ® S MEMBER OF ACORN’S FAMILY OF COMPANIES POST OFFICE BOX 3237

MONTGOMERY, ALABAMA 36109-0237 (USA) E ASPE P N G r G TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com e I N re ® ve IN R u CUSTOMER MEMBER OF: nt E E C io an DRIVEN n Rather Th OPTIONAL STRAINER HEADS

ROUND STRAINER FLAPPER TYPE BACKWATER VALVE

VARIATIONS: B

PM0457 SH 1 of 2 MATERIALS: FUNCTION: Provides backwater pro- B Chrome Plated -CP *Hinged Grate (Specify tection at point where protection is needed. Polished Bronze -PB Suffix -AH) MATERIALS: VARIATIONS DRAWING NUMBER DRAWING Nickel Bronze -NB Sediment Bucket -B H H Chrome Plated -CP *Hinged Grate (Specify Vandal Proof Screws -U Polished Bronze -PB Suffix -AH) A SIZE Nickel Bronze -NB Vandal Proof Screws -U B DIA 05 (125) 06 (150) 07 (180) 08 (205) B DIA 05 (125) 06 (150) 07 (180) 08 (205) 09 (230) 10 (255) H 2 (51) 2 (51) 2 1/4 (57) 2 1/2 (64) H 2 (51) 2 (51) 2 1/4 (57) 2 1/2 (64) 2 1/2 (64) 2 3/4 (70) MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38) MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38) 1 1/2 (38) 1 1/2 (38) X MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64) X MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64) 2 1/2 (64) 2 3/4 (70) Specify Type, Size & Finish eg: AV05NB Specify Type, Size & Finish eg: A05NB *Not available for 05" (125) size *Not available for 05" (125) size NONE SUFFIX -A SUFFIX -AV SQUARE STRAINER STRAINER HEAD w/SQUARE HINGED COVER SCALE MATERIALS: VARIATIONS: Chrome Plated -CP Flapper Type Backwater Valve B 6 (150)6 MATERIALS: VARIATIONS: Polished Bronze -PB (Specify Suffix -BV) 05 (125), Chrome Plated -CP Gasketed Water Tight Nickel Bronze -NB 06 (150), 07 (180) or 08" (205) sizes only Polished Bronze -PB Cover -GC

5-17-85 H *Hinged Grate (Specify Suffix -BH) Nickel Bronze -NB Secured Cover -SC Sediment Bucket -B Secondary Strainer 3 1/83 1/8 (79) DATE: Vandal Proof Screws -U Grate-SG B DIA 05 (125) 06 (150) 07 (180) 08 (205) 09 (230) 10 (255) H 2 (51) 2 (51) 2 1/4 (57) 2 1/2 (64) 2 1/4 (57) 2 1/4 (57) MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38) 1 1/2 (38) 1 1/2 (38) X MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64) 2 1/4 (57) 2 3/8 (60) Specify Type, Size & Finish Specify Type, Size & Finish eg: B05NB eg: BSNB TD SUFFIX -B *Not available for 05" (125) size SUFFIX -BS REINFORCED ROUND STRAINER REINFORCED TRACTOR STRAINER APPROVED BY: APPROVED

FUNCTION: Used in finished floors where light wheeled loads are FUNCTION: Used in finished floors where medium weight wheeled loads are anticipated. anticipated and loose set non-tilt tractor grate is desired. MATERIALS: VARIATIONS: B MATERIALS: VARIATIONS: Chrome Plated -CP Cast Iron -CI Flapper Type Backwater

TD Flapper Type Backwater Chrome Plated -CP Valve (Specify Suffix -DV Polished Bronze -PB Valve (Specify Suffix -CV) B H Polished Bronze -PB or -EV) Nickel Bronze -NB Sediment Bucket -B Sediment Bucket -B

CHECKED BY: Nickel Bronze -NB Vandal Proof Screws -U H Vandal Proof Screws -U B DIA 05 (125) 06 (150) 08 (205) 10 (255) SUFFIX B H X H 2 (51) 2 (51) 2 1/2 (64) 2 3/4 (70) DIA MIN MAX MIN 1 1/4 (32) 1 1/4 (32) 1 1/2 (38) 1 7/8 (48) -D 07 (180) 3 1/4 (83) 2 5/8 (67) 3 1/2 (89) MAX 2 1/4 (57) 2 1/4 (57) 2 1/2 (64) 2 3/4 (70) -E 09 (230) 3 1/2 (89) 2 3/4 (70) 3 1/2 (89) Specify Type, Size & Finish eg: D09PB PJ SUFFIX -C Specify Type, Size & Finish eg: C06NB SUFFIX -D-E E09PB TILE FLANGE ADJUSTABLE STRAINER HEAD DRAWN BY: DRAWN FUNCTION: Provides integral flange set 5/32" (4) below rim to receive floor FUNCTION: Used in a non-traffic area when a funnel type strainer head covering. Flange may have option of tapped holes for securing pan and is required and space does not allow use of the 3500 series funnel. The gasket. extended rim allows use as an anti-flood and anti-splash drip pan. MATERIALS: VARIATIONS: VARIATIONS: MATERIALS: Chrome Plated -CP Flapper Type Backwater B 7 1/27 1/2(190) Valve (Specify Suffix Flapper Type Backwater Cast Iron -CI 6 Polished Bronze -PB Valve (Specify Suffix 6 (150) 5/325/32 (4) -FV) Chrome Plated -CP Nickel Bronze -NB -F37V or F38V) Holes in Flange -SH Galvanized Cast Iron -G H 2 (51) Sediment Bucket -B SUFFIX -F37 -F38 Polished Bronze -PB X Vandal Proof Screws -U B DIA 07 (180) 09 (230) Nickel Bronze -NB MIN MAX H 3 1/4 (83) 3 1/2 (89) MIN 2 5/8 (67) 2 3/4 (70) 1 1/4 (32) 2 1/8 (54) X MAX 3 1/2 (89) 3 1/2 (89) STRAINER HEADS

2010 SERIES OPTIONAL Specify Type, Size & Finish eg: F06NB Specify Type, Size & Finish eg: F37NB F38CP SUFFIX -F SUFFIX -F37-F38 DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE ASSUME NO RESPONSIBILIT OR USE OF SUPERSEDED OR VOID DATA VOID ASSUME NO RESPONSIBILIT OR USE OF SUPERSEDED WITHOUT NOTICE AND CHANGE TOLERANCE MANUFACTURERS TO DIMENSIONS ARE SUBJECT G 10-4-01 Revised Suffix-BS RN CL E 8-24-99 Revised TBW FIGURE NUMBER F 6-11-99 Revised Tables CMD BS 2010 SERIES OPTIONAL E 11-4-97 Added Nickel Bronze EMB BS STRAINER HEADS FIGURE NUMBER REV. DATE DESCRIPTION BY CKD. BY 1 0f 2 NOTE: Dimensions shown in parenthesis are in millimeters. SMITH® JAY R. LOCATION ® H ITA SMITH MFG. CO. AN RY ® S MEMBER OF ACORN’S FAMILY OF COMPANIES POST OFFICE BOX 3237

LOW DOME STRAINER SOLID HINGED COVER SPANNER WRENCH COVER

FUNCTION: Used in areas where intermittent FUNCTION: Solid gas tight, vandal proof, PM0457 SH 2 of FUNCTION: Used in gutters and recessed areas where excessive debris build-up is expected. drain use is required. Solid cover prevents threaded cover for areas where intermittent Dome insures drainage even when partly intrusion of chips, saw-dust, etc., which are drain use is required.

DRAWING NUMBER DRAWING swept up before cover is opened for washdown. covered. MATERIALS: The secondary strainer prevents debris from MATERIALS: VARIATIONS: Chrome Plated -CP B entering the waste line. Chrome Plated -CP Flapper Type Back- A SIZE Polished Bronze -PB Polished Bronze -PB water Valve (Specify B MATERIALS: VARIATIONS: Nickel Bronze -NB Cast Iron -CI Flapper Type Nickel Bronze -NB Suffix -JV) H VARIATIONS: Holes in Flange -SH H Chrome Plated -CP Backwater Flapper Type Backwater Valve Sediment Bucket -B Polished Bronze Valve (Specify 6(150) (Specify Suffix -GV) -PB Suffix -GV) Vandal Proof Screws -U Sediment Bucket -B Nickel Bronze -NB Vandal Proof Vandal Proof Screws -U X Screws -U MIN MAX B DIA 05 (125) 06 (150) 08 (205) B DIA 05 (125) 06 (150) 07 (180) 08 (205) 3(76) NONE 2 (51) 3 (76) H 2 (51) 2 (51) 2 1/2 (64) H 2 (51) 2 (51) 2 1/4 (57) 2 1/2 (64) MIN 1 1/4 (32) 1 1/4 (32) 1 1/2 (38) X MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38) MAX 2 1/4 (57) 2 1/4 (57) 2 1/2 (64) MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64) SCALE Specify Type, Size & Finish Specify Type, Size & Finish SUFFIX -G Specify Type, Size & Finish eg: G08PB SUFFIX -H eg: H05CP SUFFIX -J eg: J06NB REINFORCED SQUARE RECTANGULAR STRAINER ANGLE STRAINER STRAINER FUNCTION: Used in finished floors where FUNCTION: Used in finished floors where FUNCTION: Shower room drain set at wall and some light wheeled traffic is anticipated. 5-17-85 light wheeled loads and or heavy foot traffic floor junction. Vertical grate openings prevent MATERIALS: VARIATIONS: are anticipated. drain stoppage should flat surface become DATE: Chrome Plated -CP Flapper Type Back- MATERIALS: covered. MATERIALS: water Valve(Specify VARIATIONS: Polished Bronze -PB Chrome Plated -CP Suffix -KV) Sediment Bucket -B D Cast Iron -CI Nickel Bronze -NB Polished Bronze -PB Chrome Plated -CP Sediment Bucket -B Vandal Proof B B Nickel Bronze -NB Vandal Proof Screws -U C Polished Bronze -PB Screws -U B x B' Nickel Bronze -NB 22 11/2/2 (64) TD H VARIATIONS: H Vandal Proof Screws -U

APPROVED BY: APPROVED B SQ 05 (125) 06 (150) 07 (180) 08 (205) SUFFIX L M N P R T SUFFIX B C D X H 2 (51) 2 (51) 2 1/4 (57) 2 1/2 (64) B x B' 4 1/2(115)x8(205) 4(100)x12(305) 5(125)x9(230) 5(125)x13(330)6(150)x10(255) 5(125)x17(430) M IN MAX MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38) H 2 1/4 (57) 2 1/2 (64) 2 1/4 (57) 3 (76) 2 1/4 (57) 3 (76) -V 3 1/2 (89) 3 1/2 (89) 4 1/2 (115) 1 5/8 (41) 2 5/8(67) X MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64) X MIN 1 3/8 (35) 1 7/8 (48) 1 3/8 (35) 2 1/8 (54) 1 3/8 (35) 2 1/4 (57) -W 6 3/4 (170) 6 3/4 (170) 6 1/2 (165) 1 5/8 (41) 2 5/8(67) MAX 2 3/8 (60) 2 3/4 (70) 2 3/8 (60) 3 (76) 2 3/8 (60) 3 1/8 (79) Specify Type, Size & Finish Specify Type,Size & Finish Specify Type, Size & Finish eg: K07CP SUFFIX SUFFIX SUFFIX -K -L-M-N-P-R-T eg: LNB -V -W eg: VPB, WNB TD EXTENSION ADAPTOR OVERFLOW WITH STANDPIPE HEAVY DUTY ADJUSTABLE

CHECKED BY: FUNCTION: Used when a strainer head must FUNCTION: Used as overflow drain in FUNCTION: Used in finished floors where light be raised to accommodate deeper floor fill. decorative pools, fish ponds or similar areas. wheeled loads and or heavy foot traffic are anticipated. REGULARLY Dome prevents floating objects from entering 3 3/4 - 12 drain line. 3 ( 3/495) - 12 FURNISHED: MATERIALS: 4 1/2 MATERIALS: Duco Cast Iron -CI 4(11 1/25) Chrome Plated -CP

PJ MINMIN 2 1/21/2 (64) 6 (1506 ) Polished Bronze -PB MAX 3 3/4 Nickel Bronze -NB MAX 3 3/4 (95) MATERIALS: Polished Bronze -PB Rough Bronze -RB A 6 Nickel Bronze -NB DRAWN BY: DRAWN Cast Bronze -CB 6 (150) VARIATIONS: Galvanized Cast 22 33/16/16 (56) Less Dome -LD VARIATIONS: Iron -G 2 2 (51) Standpipe Height Flapper Type Back- other than 6" (150) water Valve(Specify SUFFIX A X Suffix -69V) SIZE MIN MAX (Specify Height) Sediment Bucket -B NOTE: Extension can be stacked for increased -Y 2 (51) 3/4 (19) 2 1/8 (54) maximum adjustment. -Z 3 (76) 3/4 (19) 2 1/8 (54) Vandal Proof Screws -U Specify Type, Size & Finish SUFFIX -X SUFFIX -Y-Z eg: YCP, ZCP SUFFIX -69 eg: A06NB-69 8 1/4 x 3 1/4 Oval 4 (100) DIA 6 DIA (150) 6 x 2 1/2 Oval (210) x (83) (150) x (64)

4 1/4 (110) 4 1/4 (110) 4 1/2 1 (25)

STRAINER HEADS Fig. 3591 (115) Fig. 3580 Fig. 3581 Fig. 3590 2 1/2 5 x 2 1/2 5 x 2 1/2 2010 SERIES OPTIONAL 2 1/2 (64) (64) (125) x (64) (125) x (64)

DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE ASSUME NO RESPONSIBILIT OR USE OF SUPERSEDED OR VOID DATA VOID ASSUME NO RESPONSIBILIT OR USE OF SUPERSEDED WITHOUT NOTICE AND CHANGE TOLERANCE MANUFACTURERS TO DIMENSIONS ARE SUBJECT H 8-24-99 Revised TBW BS G 6-11-99 Revised Tables CMD FIGURE NUMBER F 1-22-99 T Strainer was S Strainer TBW BS 2010 SERIES OPTIONAL E 11-4-97 Added Nickel Bronze EMB BS D 10-28-96 Chg'd Func of Suffix -V -W BS STRAINER HEADS FIGURE NUMBER REV. DATE DESCRIPTION BY CKD. BY 2 of 2 NOTE: Dimensions shown in parenthesis are in millimeters. SMITH® JAY R. LOCATION ® K NITARY MFG. CO. ® SA MEMBERSMITH OF MORRIS GROUP INTERNATIONAL™ POST OFFICE BOX 3237

MONTGOMERY, ALABAMA 36109-0237 (USA) E ASPE P N G r G N e TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com ev I I r ® en N E E R u MEMBER OF: ti C CUSTOMER on han DRIVEN Rather T SINCE 1926 SANI-CEPTOR® ACID RESISTANT COATED FLOOR & INDIRECT WASTE DRAINS S3410 A.R. COATED NON-TRAFFIC TOPS 8" (205) SQUARE TOP - MEDIUM RECEPTORS FUNCTION: Used in kitchens, hospitals, food markets, restaurants, schools and all types of food handling areas not subject

DRAWING NUMBER DRAWING to foot or other traffic where the ultimate in sanitation is desirable and a medium capacity receptor is required.

Free Area A SIZE 11 SQ IN 10 (255) SQ (71) SQ CM 10 (255) SQ 8 (205) SQ 8 (205) SQ

2 (51) 2 (51) NONE 6 (150) 6 (150) SCALE:

3 (76) 3 (76)

9-19-85 A A (Pipe Size) = 02(50), 03(75) or 04(100) A

WITH DOME BOTTOM STRAINER WITH SEDIMENT BUCKET DATE:

WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA ASSUME NO RESPONSIBILITY WE CAN Fig. 3410C ...... CAULK OUTLET ...... Fig. 3411C Fig. 3410Y ...... NO-HUB OUTLET ...... Fig. 3411Y

SJM FEATURES, OPTIONS & ORDERING INFORMATION REGULARLY FURNISHED: Cast Iron Flanged Receptor with Seepage Holes, Acid Resistant Coated Interior, and Loose Set Acid Resistant Coated Cast Iron Grate. Aluminum Dome Bottom Strainer or White ABS Sediment Bucket as Indicated by APPROVED BY: Figure Number. VARIATIONS: OPTIONAL MATERIALS: Aluminum Flat Bottom Strainer -FBS All Duco Cast Iron Receptor and Grate -CI Flashing Clamp -C All Galvanized Receptor and Grate -G

JD Less Flange (Specify Fig. 3415, 3416) Polished Aluminum Dome Bottom Strainer -PDBS L Speedi-Set Service Weight NOTE: This grate is not recommended for

CHECKED BY: any type of traffic including pedestrian traffic. LXH Speedi-Set Extra Heavy NOTE: Dimensions shown in parentheses are in millimeters. OPTIONAL TOP GRATES AND COVERS FOR INDIRECT WASTE APPLICATIONS VGD SUFFIX NUMBER DESCRIPTION

DRAWN BY: DRAWN -10 ...... Less A.R.C. Grate -12 ...... With A.R.C. 1/2 Grate -13 ...... With A.R.C. 3/4 Grate -14 ...... With A.R.C. Grate with 2 1/2" (64) DIA Center Hole -15 ...... With NB Rim and Aluminum Recessed Grate -21 ...... With A.R.C. Grate and 4" (100) DIA A.R.C. Funnel -22 ...... With A.R.C. Grate and 6" (150) DIA A.R.C. Funnel -25 ...... With A.R.C. Grate and 8 1/4(210) x 3 1/4(83) x 4 1/2"(115) High Oval A.R.C. Funnel -26 ...... With A.R.C. Grate and 6(150) x 2 1/2(64) x 1"(25) High Oval A.R.C. Funnel -41 ...... With A.R.C. Solid Cover -42 ...... With A.R.C. 1/2 Solid Cover -44 ...... With A.R.C. Solid Cover with 2 1/2" (64) DIA Center Hole DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE AND CHANGE WITHOUT TOLERANCE MANUFACTURERS TO ARE SUBJECT DIMENSIONS 3410, 3411 K 8-4-14 Revised Variations TBW CL WEIGHT VOLUME FIGURE NUMBER J 6-10-14 Revised Reg. Furn., Var. TBW TWK POUNDS CUBIC FEET H 01/20/11 Updated Logo JJ TW G 12-3-98 Added Note CMD CL REV. DATE DESCRIPTION BY CKD. BY FIGURE NUMBER 3410, 3411