Fm0532 Catalog, All Products

Pumps and Systems

Utility, Pedestal Sump, Effluent, Dewatering Backup Systems Sewage Pumps Grinder Pumps and Systems Specialty Products

® WHAT SETS ZOELLER PUMPS APART? Since 1939, Zoeller Company has been manufacturing water pumps of many types. From pedestal pumps in the beginning to large HP, submersible, non-clog pumps in recent years, we have gained invaluable manufacturing experience from our humble beginning in August Zoeller’s basement workshop. Over the years, one of our most important mottos has been, ‘We excel at 1,000 little things’. From start to finish, we take pride in our products. When you have residential or commercial wastewater issues, you can count on Zoeller to deliver the very best solutions. Our commitment to unsurpassed quality offers years of service and durability with a responsive and knowledgeable product support team just a phone call away. • MANUFACTURING IS IN OUR BLOOD… Rather than using a ‘puzzle piece’ mentality and simply buying components from other sources and assembling them, we manufacture most of our products from start to finish, continually checking the quality throughout the entire process. Quality is always the most important element at Zoeller. Above all, quality is what has made us successful and continues to drive the decisions we make. A quality product cannot be manufactured with low-grade components. By bringing in high- quality raw castings as well as machining and powder coating the pieces in house, we are able to control the quality of each part and identify any defect throughout the manufacturing process. Each piece is subjected to numerous quality checkpoints along the way to guarantee that it is the best of the best. • FACTORY TESTING IS NOT JUST A BUZZWORD… Instead of running ‘audits’ on a calculated number of pumps, all submersible Zoeller pumps are 100% factory tested underwater prior to shipment. Each pump is subjected to a leak test to ensure that all gaskets, seals and mating surfaces will hold under pressure. After the pressurized leak test, the pump is powered up and run underwater to ensure that it is capable of the published head capacity and flow rate listed in our catalog and specification sheets. This testing allows us to guarantee the pump will operate out of the box every time, and you can rest assured that YOUR Zoeller pump was tested underwater for both electrical and hydraulic performance. • FULL BREADTH OF PRODUCT LINE… Zoeller is your ‘one stop shop’ when dealing with dewatering and wastewater systems. We offer everything from a small fractional sump pump to a large, 60 HP, non-clog pump. From battery back-ups, check valves, sewage grinder systems, small prepackaged residential units or large prepackaged municipal systems, Zoeller can offer it all. Next time you are looking for a water or wastewater system, reach for the only catalog you will ever need… Zoeller Company!

Zoeller provides the best products at every price point. Look for these icons to be assured of the best choice for your specific project needs:

The Center For Excellence training facility at Zoeller Company in Louisville, Kentucky offers a unique opportunity to experience the pump industry, learning from experts in the field. Bring your customers for an hour, a day, or more. Learn about the pump industry and why Zoeller products are designed to be the best for professionals. What We Do Gain first-hand experience in the unique and varied aspects of pump manufacturing and specification at our 6,000 ft2 training facility. In the demonstration room, our industry professionals offer live demonstrations and computer simulations of our latest products and core concepts. Lift stations including active controls are designed to demonstrate the how-and-why of pump technology. A state-of-the-art classroom provides space for lectures and group discussions with a library of cutaway models for reference. Training Tailored To Meet Your Needs

Training experiences at the CFE are tailored to cover the specific topics that most interest you and your customers. All participants gain valuable technical and practical product knowledge. Our training staff will work with you to design the most profitable experience for your group.

Some topics we have covered to date include:

Pump sizing Troubleshooting a control panel Product overview Startup training How performance curves are created Rail systems

Email us! [email protected]

© All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 3 • Thermally protected motor • LM44 is AUTOMATIC with no float switch 42, 44, 46 • Available with 9’ or 20’ (3 or 6 m) power cord • Oil free (models 42, 44) Floor Sucker Series • Temperature rated 104 °F (40 °C) Ideal for intermittent use, these pumps can For more information, see Technical Data Sheet FM2773. draw water down as low as 1/8” (3 mm). PUMP PERFORMANCE CURVE METERS To reduce maintenance and eliminate FEET MODELS 42/44/46

UTILITY, PEDESTAL UTILITY, clogging, a screened bottom intake design 35 is used. Motor life is enhanced and extended 10 by an energy-efficient design and a 30 8 UV-protected pump body. Pump discharge 25 is fully adaptable to standard garden hose connections, and a handle is provided for ease of handling. 6 20

15 TOTAL DYNAMIC HEAD DYNAMIC TOTAL APPLICATIONS: 4 10 • General water transfer 2 5 • Dewatering 42 44 46

0 5 10 15 20 25 30 35 40 45 50 55 60 SPECIFICATIONS: GALLONS LITERS 0 40 80 120 160 200 • 3/4” (19 mm) garden hose outlet FLOW PER MINUTE 014066

SPECIFICATIONS: • 3/4” (19 mm) garden hose inlet and outlet 311 • Includes 6’ (2 m) suction hose and remote suction plate • Available with 6’ (2 m) power cord Mighty Mover • Temperature rated 130 °F (54 °C) Ideal for intermittent use, For more information, see Technical Data Sheet FM2774. this portable and lightweight PUMP PERFORMANCE CURVE transfer pump performs at a METERS FEET MODEL 311 high level. This type of pump often experiences dry-run 12 40

conditions, so the metal pump housing and nylon impeller 35 10 (extra impeller included) can outperform similar products 30

with plastic pump housings. It includes a suction hose and 8 25 remote suction plate for added convenience. 6 20

APPLICATIONS: HEAD DYNAMIC TOTAL 15 4

• General water transfer 10

2 • Draining water heaters 5

• Filling radiant heating lines 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 GALLONS LITERS 0 80 160 240 320 400 480 560 640 720 800 880 960 1040 112 0 1200 1280

FLOW PER HOUR SK2176

4 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com UTILITY, PEDESTAL 314 PUMP PERFORMANCE CURVE "HIGH CAPACITY" WATER MOVER 314 120 Water Mover 100 Generating almost 50 PSI, this is our most powerful 80 transfer pump. The durable cast iron pump housing and 60 easily serviced brush motor ensure trouble-free operation. For convenience, an over- 40 sized priming handle is included, so no tools are required. 20 The extra-long power cord and pump-mounted on-off switch TOTAL DYNAMIC HEAD - FT. simplify operation. 0 0 300 600 900 1200 1500 1800 APPLICATIONS: FLOW - GPH IL0153 • Water transfer • Power washing • Filling radiant heating lines

SPECIFICATIONS: • 3/4” NPT inlet and outlet with lead-free brass garden hose adapters • Includes suction screen and extra set of brushes • Available with 20’ (6 m) power cord • Temperature rated 120 °F (49 °C) For more information, see Technical Data Sheet FM2775. 81, 82, 84 METERS FEET PUMP PERFORMANCE CURVE Old Faithful MODELS 81/82/84 Ideal for residential sump pits, these column 25 pumps feature an above-pit cover motor design. 84 An adjustable float allows the user to set the 6 20 on and off points that best meet their needs. 82 The permanently lubricated motor is thermally 15 protected for quiet operation and longer life. The 81 non-clogging vortex impeller and inlet screen 4 help eliminate jamming from debris such as 10 leaves and other small particles. TOTAL DYNAMIC HEAD DYNAMIC TOTAL 2 APPLICATIONS: 5 • New sump and residential construction • Sump pits 0 10 20 30 40 50 60 GALLONS 014569 SPECIFICATIONS: LITERS 80 160 0 • 1-1/2” or 1-1/4” NPT discharge FLOW PER MINUTE • Top inlet eliminates air-locked conditions • Adjustable float • 81/82 thermoplastic base, 84 cast iron base • Temperature rated 130 °F (54 °C) For more information, see Technical Data Sheet FM2776.

R 20

O 6

C T

TM 15 4 This compact, robust pump fits into smaller sump basins. The factory-set 10 float switch is set to maximize pump 2

range while ensuring no float hang- HEAD DYNAMIC TOTAL 5 ups. The sturdy pump base keeps larger debris from clogging the pump 0 and prevents the pump from moving 5 10 15 20 25 30 35 around the pit. GALLONS LITERS 0 20 40 60 80 100 120 APPLICATIONS: 018141 • Residential sump FLOW PER MINUTE • New construction sump N E E R G SUMP, EFFLUENT SUMP, R E

SPECIFICATIONS: L L

E ® O • 1-1/2” NPT discharge Z • Mechanical float • Available with 10’ (3 m) power cord • 3/8” (9 mm) solids passing For more information, see Technical Data Sheet FM2777.

E 73, 75 N E R

FEET PUMP PERFORMANCE CURVE G METERS Y S A

I MODELS 73/75

D 30 U

C T

TM 8 The Models 73 and 75 offer 25 accessible quality for the cost conscious. These submersible 6 20 pumps are designed for use in residential or light commercial dewatering applications and can 15 be used to transfer groundwater or effluent. The 4 pump includes a cast iron motor housing with a 10

corrosion-resistant, baked-on enamel finish and HEAD DYNAMIC TOTAL 75 is designed to provide great heat dissipation from 2 73 the motor, ensuring a long service life. 5

0 APPLICATIONS: 10 20 30 40 50 60 • Water transfer GALLONS • Sump and dewatering systems LITERS • New sump and residential 0 80 160 construction FLOW PER MINUTE 153894

SPECIFICATIONS: N E E • 1/3 HP (Model 73) and 1/2 HP (Model 75) R G R E

• 1-1/2” NPT discharge L L

E ® O • Thermally protected motor Z • Available with 10’ (3 m) power cord • 3/8” (9 mm) solids passing For more information, see Technical Data Sheets FM2897 and FM2849.

6 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 53®, 55, 57, 59, 98 Mighty-Mate/Flow-Mate Considered one of America’s most popular sump pumps. This ® robust family of sump pumps is known for reliability, durability and performance. Available with an intergral, 2-pole, snap- action float switch. The heat-dissipating cast iron body with powder coated epoxy finish provides maximum pumping performance under the most extreme conditions. With Zoeller’s cool run design, the hermetically sealed, oil-filled motor SUMP, EFFLUENT and non-clogging vortex impeller add up to a long-lasting, trouble-free product.

N E E R G R NON E ® CLOGGING L

L “This design is a VOR TEX

E ® registered trademark IMPELLER O Z of Zoeller Pump Co.” #5,024,907

APPLICATIONS: • Water transfer • Sump and effluent systems OPTIONAL* PUMP STAND P/N 10-2421 “Easy assembly” • Light commercial (pump & disharge pipe • Reduces potential clogging by debris not included.) • New sump and residential construction • Replaces rocks or bricks under the pump • Made of durable, non-corrosive ABS • Raises pump 2" (5 cm) off bottom of basin SPECIFICATIONS: • Provides the ability to raise intake by adding sections of 1-1/2" or 2" (DN40 or DN50) PVC piping • 1-1/2” NPT discharge • Attaches securely to pump • 3/10 HP (53®, 55, 57, 59), 1/2 HP (98) • Accommodates sump, dewatering and effluent applications • Available in automatic or nonautomatic NOTE: Make sure float is free from obstruction. • 1/2” (12 mm) spherical solids capacity *Fits series 49, 50, 63, 70, 95, 98, 130, 140 and 150. • Thermoplastic or cast iron base • Thermoplastic or cast iron impeller • Bronze construction available (55/59 series) For more information, see Technical Data Sheets FM2778, FM2779. METERS FEET PUMP PERFORMANCE CURVE MODEL 53®/55/57/59/98

6 20

15 4 98

TOTAL DYNAMIC HEAD DYNAMIC TOTAL 53®/55/57/59 2 5

0 10 20 30 40 50 60 70 80 GALLONS Nonautomatic model with piggyback LITERS 0 80 160 240

FLOW PER MINUTE 152655 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 7 SPECIFICATIONS: • 1-1/2” NPT discharge 63 • 3/10 HP • 1/2” (12 mm) spherical solids capacity • LED lighted plug Premium Series • Available in automatic operation only • Advanced switch technology These Premium sump pumps are designed with the very best • Viton switch arm boot and heavy-duty power cord materials and latest technology. • Cast iron, non-clogging vortex impeller Based on the 50 series sump pump, • Cast iron base considered one of America’s most For more information, see Technical Data Sheet FM2899. popular sump pumps, this product offers advanced switch technology allowing for longer switch life. METERS FEET PUMP PERFORMANCE CURVE This model is constructed of the MODEL 63 same heat-dissipating cast iron 6 20 with powder coated epoxy finish, providing maximum pumping performance under the most extreme conditions. With Zoeller’s 15 cool run design, the hermetically-sealed, oil-filled motor and 4

non-clogging vortex impeller add up to a long-lasting, trouble- ® 10 “This design is a registered trademark

free product. The heavy-duty power cord also includes an LED of Zoeller Pump Co.” HEAD DYNAMIC TOTAL #5,024,907 2 SUMP, EFFLUENT SUMP, lighted plug. 5

N E APPLICATIONS: E 0 NON R CLOGGING G • Water transfer VOR TEX R 10 20 30 40 50 IMPELLER E L GALLONS • Sump systems L

E ®

O Z LITERS • Light commercial 0 80 160 • New sump and residential construction FLOW PER MINUTE 153854

95 SPECIFICATIONS: • 1-1/2” NPT discharge Premium Series • 1/2 HP • 1/2” (12 mm) spherical solids capacity The Model 95 Premium sump • LED lighted plug pump is designed with the very • Available in automatic operation only • Advanced switch technology NON best materials and the latest CLOGGING VOR TEX technology. • Viton switch arm boot and heavy-duty power cord IMPELLER Based on the 98 sump pump, • Non-clogging vortex impeller one of America’s most popular • Cast iron base

N sump pumps, this product offers E For more information, see Technical Data Sheet FM2985. E R advanced switch technology G R E

ensuring longer switch life. The L

E ® O

Premium sump pump also provides Z 10% higher performance (GPM and TDH) over the Model 98. FEET METERS PUMP PERFORMANCE CURVE This model is constructed of MODEL 95 the same heat-dissipating cast 10 iron with powder coated epoxy finish, providing maximum 30

pumping performance under the most extreme conditions. 8 With Zoeller’s cool run design, the hermetically-sealed, oil- 25 filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product. The heavy-duty power 6 20 cord also includes an LED lighted plug. 15 4

APPLICATIONS: HEAD DYNAMIC TOTAL 10 • Water transfer 2 • Sump systems 5 • Light commercial • New sump and residential construction 0 10 20 30 40 50 60 70 80 90 GALLONS LITERS 0 40 80 120 160 200 240 280 320 FLOW PER MINUTE 154422 8 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com • Bronze construction available (139 series) 137, 139, 140, 145 • High head version available (145 series) • Double shaft seal versions available for added protection on models 140/145. Flow-Mate For more information, see Technical Data Sheets FM2782, FM2783. In high head dewatering or effluent applications where pumping performance is critical, this robust FEET

METERS PUMP PERFORMANCE CURVE family of pumps is known for reliability, MODEL 137/140/145 durability and performance. These 75 22 pumps are especially suited for harsh 70

environments. Zoeller’s cool run design 20 65 SUMP, EFFLUENT and corrosion-resistant, powder coated 60 epoxy finish add up to a long-lasting, 18 55 trouble-free product. 16 50

APPLICATIONS: 14 45

• STEP or onsite applications 40 12 • Water transfer 35 • Light commercial dewatering 10 30 TOTAL DYNAMIC HEAD TOTAL

8 25 N E SPECIFICATIONS: E R 6 20 G • 1-1/2” NPT discharge R E

L 15

L 4

• 1/2 HP through 1 HP E ® O Z 10 • Available in automatic or nonautomatic 2 5 • Model 137, 139, 140: 1/2” (12 mm) spherical solids 145 140 137 capacity with vortex impeller 0 10 20 30 40 50 60 70 80 90 100 • Model 145: 3/4” (19 mm) spherical solids capacity with GALLONS LITERS 0 80 160 240 320 152656 vortex impeller FLOW PER MINUTE

151, 152, 153 PUMP PERFORMANCE CURVE FEET METERS MODEL 151/152/153 Dose-Mate 50 14 This is our fastest growing line of effluent 45 153 pumps. The 150 series is truly a workhorse designed for reliability under extreme 12 40 conditions in an effluent environment. 150 35 series pump curves cover a wide range 10 152 of applications. They are well suited to 30 applications with low pressure pipe (LPP) 8 151 and enhanced flow STEP systems. Zoeller’s 25 cool run design and corrosion-resistant,

TOTAL DYNAMIC HEAD DYNAMIC TOTAL 20 powder coated epoxy finish, in addition to 6 the hermetically sealed, oil-filled motor and 15 non-clogging vortex impeller add up to a 4 long-lasting, trouble-free product. 10 2 5 APPLICATIONS: 0 • STEP or onsite applications 10 20 30 40 50 60 70 80 90 100 GALLONS • Light commercial dewatering LITERS 0 40 80 120 160 200 240 280 320 360

N SPECIFICATIONS: E E FLOW PER MINUTE 014508 R G • 1-1/2” NPT discharge R E

L L

E ®

• 3/10 HP through 1/2 HP O Z • Available in nonautomatic or with a variable level piggyback mechanical switch • 1/2” (12 mm) spherical solids capacity with vortex thermoplastic impeller For more information, see Technical Data Sheet FM2784. © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 9 161, 163, 165 Flow-Mate Heavy duty construction with oversized bearings and a balanced bronze, non-clogging vortex impeller allow these pumps to stand up to the highest heads and maximum flows. They are well suited to applications with low pressure pipe (LPP) and enhanced flow STEP systems. Using Zoeller’s cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion- resistant, powder coated epoxy finish and hermetically sealed, oil-filled motor add up to a long-lasting, trouble-free product.

APPLICATIONS: N E E • Onsite or septic applications R G R E

• Enhanced flow STEP systems L L

E ®

O • Commercial dewatering Z • Sump/dewatering

SUMP, EFFLUENT SUMP, SPECIFICATIONS: • 1-1/2” NPT discharge (available with 2” or 3” NPT bolt-on flange) • 1/2 HP through 1 HP • Available in automatic or nonautomatic • 3/4” (19 mm) spherical solids capacity with cast iron vortex impeller • Hazardous location/explosion-proof version available (automatic and nonautomatic) • Double shaft seal versions available for added protection • Thermally protected motor For more information, see Technical Data Sheet FM2785.

PUMP PERFORMANCE CURVE FEET METERS MODELS 161/4161 - 163/4163 - 165/4165

165/4165 163/4163 TOTAL DYNAMIC HEAD DYNAMIC TOTAL

Explosion-proof models available

161/4161

GALLONS LITERS

FLOW PER MINUTE 009920A

10 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 185, 186, 188, 189, 191 Flow-Mate Heavy duty construction with oversized bearings and a balanced bronze, non-clogging vortex impeller allow this series of pumps to stand up to the highest heads and maximum flows. They are well suited to applications with low pressure pipe (LPP) and enhanced flow STEP systems. Using Zoeller’s cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion-resistant, powder coated epoxy finish and hermetically sealed, oil-filled motor add up to a long-lasting, trouble-free product. SUMP, EFFLUENT

APPLICATIONS: N E E • High head onsite or septic applications R G R E

• Enhanced flow STEP systems L L

E ® O

• Commercial dewatering Z

SPECIFICATIONS: • 1-1/2” NPT discharge (available with 2” or 3” NPT bolt-on flange) • 1 HP through 2 HP • Available in automatic or nonautomatic • 3/4” (19 mm) spherical solids capacity with bronze vortex impeller • Model 191 has 5/8” (16 mm) spherical solid passing capacity • Hazardous location/explosion-proof version available (automatic and nonautomatic) • Double shaft seal versions available for added protection • Thermally protected motor For more information, see Technical Data Sheet FM2786.

PUMP PERFORMANCE CURVE FEET METERS MODELS 185/4185-186/4186-188/4188-189/4189-191 140

40 130

120 36

110 32 100

28 90

24 80

TOTAL DYNAMIC HEAD DYNAMIC TOTAL 20 189/4189 60

16 50

12 40

30 8 185/4185

20 186/4186 4 191 188/4188 10

Explosion-proof models available 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 GALLONS LITERS 0 80 160 240 320 400 480 560 For complete product FLOW PER MINUTE 009903 information, visit: zoellerpumps.com

These self-testing sump pump systems take over when the main power is interrupted or the primary pump isn’t getting the job done. The powerful, self-testing smart-controllers overcome problems caused by dormancy and system neglect. They are internet-connected through Zoeller’s Z Control® Platform, granting users free 24/7 monitoring and remote control of equipment with the Z Control® mobile app or web interface. You can also recieve free emails, texts, and push notifications about system status and alerts. U.S. Patent No. D740329

Free Z Control® account at

Search: “Z Control” BACKUP SYSTEMS BACKUP

The best protection money can buy! • Highest performance and efficiency pump • Boost mode performance when needed (Active only) • Two independent switches, supervised by controller • Local alarms and indicators • Self-testing controller with built-in battery maintenance and alarms • Z Control® free access - Wifi and ethernet onnectionsc - Remote monitoring and control - Email, text and push notifications - Additional system data, status, and tools

SPECIFICATIONS: • 1-1/2” NPT discharge METERS • Integrated check valves FEET PUMP PERFORMANCE CURVE MODEL 508 • Active includes 508 DC pump, Active controller, Z Control® 8 @ 12.1 volts Gateway, vertical operational switch, reed high-water 25 switch, battery box, fittings, and more. 6 20 • Fit includes 508 DC pump fit controller with built-in wiFi, vertical operational switch, reed high-water switch, battery 15 box, fittings 4 N E 10 E For more information, see Technical Data Sheet FM2926 (Active) and R

G HEAD DYNAMIC TOTAL 2 FM3124( Fit). R

E 5 L L

Self-testing 12 Volt Battery Backup Sump Pump The high performance Aquanot® Spin 508 provides extra protection when a primary AC pump shuts down due to a power SPECIFICATIONS: outage or another electrical problem. A smart, UL recognized • Self-testing pump charger/controller with battery burnout and overcharge • Early warning and smart diagnostics protection maximizes battery life and provides over 7 hours of • Supervised switch connections continuous pumping. All necessary pipes, valves, and fittings are included to transform your existing system into a complete • Optional high water sensor AC/DC sump pump system. The alarm, light indicators, and self- • 1-1/2” NPT discharge includes check valves testing ensure peace of mind for the homeowner. • Includes all necessary fittings for installation For more information, see Technical Data Sheet FM3165. BACKUP SYSTEMS

Self-testing 12 Volt Battery Backup Sump Pump Entry level backup sump pump. When basic performance and protection is all that is needed, this solid quality pump, charger, and switch will provide peace of mind.

SPECIFICATIONS: • Solid performance pump • Fully automatic pump and charger • Heavy duty, fully automatic, supervised switch • Self-testing controller • 3 year limited warranty For more information, see Technical Data Sheet FM2804.

585 Aquanot ® Pedestal

Battery Backup APPLICATIONS: • Continuous pumping during power outage Pedestal Sump Pump SPECIFICATIONS: This is our most powerful backup pumping system. With over • 1-1/2” NPT discharge 25 years of proven performance in the field, the Aquanot® is the • Includes 28 A charger proven solution for extra protection when your primary pump fails • Adjustable float for any reason. A heavy duty 12 V motor with a positive contact float switch discharges water as fast as many primary pumps. For more information, see Technical Data Sheet FM2806. The fully automatic, electronic 28 amp, UL recognized charger monitors and maintains the system at peak readiness. The high water alarm, stainless steel column and shaft, and non-corrosive pump housing add to this system’s features.

California Energy 585 pump and charger BC Commission compliant

Preassembled 12 Volt Battery Backup & Primary Sump Pump Packages Save time and money with our top selling primary and backup sump pump packages. These systems are factory assembled with 1-1/2” schedule 40 PVC pipe and fittings for simple “drop- in” installation. Packages come with switches, automatic, agency approved charger/controllers, and an efficient pump providing up to 7 hours of continuous pumping on battery- only power. Battery burn-out, overcharge protection, and diagnostics are also included for added peace of mind. Preassembled primary and backup sump pump packages are available for both high performance Aquanot® Series (Model 508) and entry level Basement Sentry® Series (Model 507). Several models are Z Control enabled with built in Wi-Fi. BACKUP SYSTEMS BACKUP ProPak models include choices of primary pumps: 73, 53, 63, 98. See FM2803

SPECIFICATIONS: • 1-1/2” NPT discharge with inline check valve • Completely preassembled – ready to install • Includes “America’s favorite sump pump” For more information, see Technical Data Sheet FM2803.

* Primary electric sump pump only included with ProPak models. U.S. Patent No. D740329

Free Z Control® account at

Search: “Z Control”

For complete product information, visit: zoellerpumps.com

N E E R G R E

L L

E ® O Z

(Table FM3219) MODEL COMPARISON ZOELLER BATTERY BACKUP SYSTEMS

PERFORMANCE 34 34 34 15 GPM @ 10' 12.6 V PERFORMANCE 40 N/A N/A N/A BOOST MODE RUN - continuous 6 hours 6 hours 6 hours 7 hours TIME - 10% duty BACKUP SYSTEMS with 12 V 48 hours+ 48 hours+ 48 hours+ 48 hours+ battery cycle Total estimated gallons 12,500 11,900 11,900 9,500 per battery Self-testing Yes Yes Yes Yes

Yes Yes No No Text/Email/App Yes Yes No No notification Secondary float Yes Yes Optional 10-4830 No Float monitoring Yes Yes Yes Yes Battery replacement Yes Yes No No reminder List of alarms/status 6 local/audible 4 local/audible 4 local/audible 4 local/audible 10 more online 10 more online 5 years 3 years 3 years 3 years Warranty 5 years w/ M63 Propak Item # 508-0008 508-0014 508-0005 507-0005 ProPak combo systems with M63, .3 HP with M53®, .3 HP 508-0015 with M53®, .3 HP 508-0006 with M73, .3 HP primary pump included 508-0013 with M98, .5 HP 508-0016 with M98, .5 HP 508-0007 507-0013 with M63, .3 HP 508-0020 Batteries 10-1450 AGM 27 10-5184 Dual Battery Kit All Aquanot batteries are 10-0761 Flooded 31 (contains heavy duty jumper Maintenance Free (MF) 10-5105 Flooded 27 wires and additional battery box)

WATER-POWERED BACKUP PUMP Water-Powered Emergency Backup Sump Pump System Zoeller’s FLEX® is a high capacity, high efficiency, water-powered backup system. The FLEX® takes over seamlessly when your primary sump system fails. Horizontal OR vertical installation capability allows FLEX® to fit most sump applications. YEAR APPLICATIONS: 3 WARRANTY • Continuous pumping during power outage using city water pressure.

SPECIFICATIONS: • No electricity or batteries required • Municipal/city water pressure powered system • Unit requires 3/4” inlet line to operate properly BACKUP SYSTEMS BACKUP • Adaptable to 1-1/4” or 1-1/2” suction pipe • Engineered for trouble-free operation • Non-corrosive materials • Removes up to 2 gallons for every gallon used For more information, see Technical Data Sheet FM3169

PUMP PERFORMANCE METERS FEET CURVE MODEL 540 14 45 TM 12 40

35 10 30

8 25 80 PSI

TOTAL DYNAMIC HEAD DYNAMIC TOTAL 6 20

60 PSI 15 4 40 PSI

2 5 Horizontal Installation Vertical Installation

0 5 10 15 20 25 GALLONS LITERS 0 20 40 60 80

The Model 212 offers accessible quality for the cost conscious. This submersible pump is designed for use in residential or light commercial sewage applications and can be used to transfer groundwater, effluent, or sewage. The pump includes a cast iron motor housing with a corrosion- resistant, baked-on enamel finish and is designed to provide great heat dissipation from the motor, ensuring a long service life. Product may not be as pictured.

PUMP PERFORMANCE CURVE METERS APPLICATIONS: FEET MODEL 212

• Residential sewage E 25 N E R G N • Water transfer and dewatering Y E

S E A R V G 6 20 I

• New construction N R

G E

P L

R L

O E

D ® O

U Z 15 C

SPECIFICATIONS: T 4

TM • 2” NPT discharge 10 • 1/2 HP 2

• 2” (50 mm) spherical solids capacity with non-clogging HEAD DYNAMIC TOTAL 5 engineered plastic vortex impeller For more information, see Technical Data Sheet FM2850. 0 10 20 30 40 50 60 70 80 90 Some pumps available in 912 package systems. See page 23. GALLONS LITERS 0 40 80 120 160 200 240 280 320 FLOW PER MINUTE 153444

264, 266, 267, 270 SEWAGE, DEWATERING Waste-Mate Considered one of America’s most popular sewage ejectors, this robust family of pumps is known for reliability, durability and performance. These pumps are industry-proven, built of cast iron with stainless steel hardware. Comes with an integral, 2-pole, snap-action float switch. The heat-dissipating cast iron body with powder coated epoxy finish provides maximum pumping performance under the most extreme conditions. With a cool run design, the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product.

APPLICATIONS: FEET METERS PUMP PERFORMANCE CURVE • R esidential and light commercial sewage and MODEL 264/266/267/270 dewatering • New construction • Wastewater / lift stations

N E E R G R SPECIFICATIONS: E

L L

E ® O • 2” NPT discharge Z

• 4/10 HP through 1 HP HEAD DYNAMIC TOTAL • Available in automatic or nonautomatic • 2” (50 mm) spherical solids capacity with vortex thermoplastic impeller on model 270, cast iron impeller on 264 266 270 models 266 and 267 267 • Models 266 and 267 available in 3 phase voltages For more information, see Technical Data Sheets GALLONS FM2788, FM2789, FM2790. LITERS Some pumps available in 912 package systems. See page 23. FLOW PER MINUTE 153444 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 17

TOTAL DYNAMIC HEAD/FLOW PER MINUTE SEWAGE AND DEWATERING 282, 284 • Thermally protected motor Waste-Mate • Hazardous location/explosion proof version available Heavy duty construction, oversized bearings (automatic and nonautomatic) and balanced non-clogging vortex impellers • Double shaft seal versions available for added protection allow these pumps to stand up to the highest For more information, see Technical Data Sheet FM2791. heads and maximum flows. Using Zoeller’s cool run design, we added fins to these pumps, lowering operating temperatures. PUMP PERFORMANCE CURVE FEET

The corrosion-resistant, powder coated epoxy METERS finish and hermetically sealed, oil-filled motor MODELS 282/4282/284/4284

add up to a long-lasting, trouble-free product. 12 40

APPLICATIONS: 35 10

N • Commercial sewage and dewatering E 30 E R • Wastewater G 8 R E 25

L 284 L

• Lift stations E ® 4284 O

Z 6 20

SPECIFICATIONS: 15 282 TOTAL DYNAMIC HEAD DYNAMIC TOTAL 4 • 2” or 3” NPT flanged vertical discharge 4282 10 009927A • 1/2 HP and 1 HP 2 • Available in automatic or nonautomatic 5

• 2” (50 mm) spherical solids capacity with cast iron 0 vortex impeller 20 40 60 80 100 120 140 160 180 200 GALLONS LITERS 0 80 160 240 320 400 480 560 640 720 FLOW PER MINUTE 292, 293, 294, 295 Waste-Mate Heavy duty construction, oversized bearings and balanced non-clogging vortex impellers allow these pumps to stand up to the highest heads and maximum flows. Using Zoeller’s cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion- resistant, powder coated epoxy finish and hermetically sealed, oil-filled motor add up to a long-lasting, trouble- SEWAGE, DEWATERING SEWAGE, free product. APPLICATIONS: • Commercial sewage and dewatering N E FEET METERS PUMP PERFORMANCE CURVE E • Wastewater R MODEL 292/4292/293/4293/294/4294/295/4295 G 80 R 24 • Lift stations E L

L 75

E ®

O 22 Z 70

SPECIFICATIONS: 20 65

60 • 2” or 3” NPT flanged vertical discharge 18

55 • 1/2 HP through 2 HP 16 50

• Available in automatic or nonautomatic 14 45

• 2” (50 mm) spherical solids capacity with cast iron 12 40

vortex impeller 35

TOTAL DYNAMIC HEAD DYNAMIC TOTAL 10 • Thermally protected motor 30

8 • Hazardous location/explosion proof version 25 available (automatic and nonautomatic) 6 20

15 293/4293 • Double shaft seal versions available for added protection 4 10 295/4295 For more information, see Technical Data Sheet FM2792. 2 5 292/4292 294/4294

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 GALLONS LITERS 0 80 160 240 320 400 480 560 640 720 800 FLOW PER MINUTE 009919A 18 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com SPECIFICATIONS: • 4” ANSI flange discharge 404, 405 • 2 and 3 HP • 3” (76 mm) spherical solids capacity with cast iron vortex Waste-Mate impeller • Hazardous location/explosion proof, nonautomatic version Designed to handle large solids and also available high flow rates, these pumps are • Double shaft seal versions available for added protection ideal for quickly removing water as well as raw waste. Suited for parking • Thermally protected motor lots and storm water transfer, the For more information, see Technical Data Sheet FM2793. oversized bearings and balanced non- clogging vortex impellers allow these PUMP PERFORMANCE CURVE FEET METERS pumps to meet the most demanding MODELS 404/4404/405/4405 3" SOLIDS CAPACITY applications. Using our cool run design, 12 40 we added fins to these pumps, lowering operating temperatures. The corrosion- 35 resistant, powder coated epoxy 10 finish and hermetically sealed, oil-filled 30 405/4405 motor add up to a long-lasting, trouble- 8 25 free product. Rail systems are available

for ease of installation and removal. 6 20 N E E APPLICATIONS: R HEAD DYNAMIC TOTAL G 15 R E 4

• High capacity dewatering L L

E ®

O 10 • Commercial sewage Z 404/4404 2 • Storm water removal 5

0 50 100 150 200 250 300 350 400 GALLONS

LITERS 0 200 400 600 800 1000 1200 1400 FLOW PER MINUTE 611, 621, 631, 641, 651, 661 SEWAGE, DEWATERING Sewage Waste Engineered for large commercial and industrial applications, these pumps utilize extended vane ductile iron impellers for improved efficiency and performance. The tandem seal design provides additional protection from abrasives typically found in demanding applications. Cooling fins, not PUMP PERFORMANCE CURVE METERS FEET commonly found in this type of pump, lower MODELS 611/621/631/641/651/661 operating temperatures, providing longer 70

motor and bearing life. Rail systems are 20 65

available for ease of installation and removal. 60 18

APPLICATIONS: 55 16 • Industrial and commercial wastewater 50

14 • Storm water removal 45 • Engineered lift stations 12 40

N 35 m E E 10 R SPECIFICATIONS: G 30 R TOTAL DYNAMIC HEAD DYNAMIC TOTAL E • 3” NPT vertical or 3”or 4” ANSI flange discharge L 8 L 25 651 1PH

E ® O

• 1 HP through 7-1/2 HP Z 641 1PH 6 20 • 2-1/2” (64 mm) spherical solids capacity with cast iron, 15 two vane, semi–open impeller 4 10 • Hazardous location/explosion proof, nonautomatic 661 2 version also available 5 6 11 621 631 641 651 • Double shaft seal for added protection 0 50 100 150 200 250 300 350 400 450 500 550 600 650 GALLONS For more information, see Technical Data Sheet FM2794. LITERS 0 400 800 1200 1600 2000 2400

FLOW PER MINUTE 013859 012116 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 19 803, 805, 807 Grinder Pumps Fractional HP Grinder Series. World’s first integral automatic grinder. All cast iron grinder series for difficult residential applications where ejectors struggle. Handles entire household of “flushable” materials. Available in 115V or 230 volt for residential use without commercial costs. U.S. Patent No. 8,562,287

APPLICATIONS: • Residential wastewater • Light commercial

SPECIFICATIONS: • 1-1/4” NPT discharge • 803 - 1/2 HP, 805 - 3/4 HP, 807 - 1 HP • Cast iron construction • Oil-filled orf optimal heat dissipation • Thermally-protected motor For more information, see Technical Data Sheet FM2882.

Available in package systems. See page 27 PUMP PERFORMANCE CURVE METERS FEET MODEL 803/805/807

60 18

55 16 50 807 14 45

12 40 805

35 10 30 803

TOTAL DYNAMIC HEAD DYNAMIC TOTAL 8 25 GRINDER PUMPS

6 20

15 4 915-0020 and 915-0022 N 10 E E shown, left to right R G 2 R E 5

L L

E ® O

Z 0 5 10 15 20 25 30 35 40 45 50 GALLONS LITERS 0 20 40 60 80 100 120 140 160 180 FLOW PER MINUTE 153604 20 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com SPECIFICATIONS: • 1-1/4” NPT discharge 810, 815 • 1 and 2 HP • Rockwell C55-60 hardened 440C stainless steel cutter and disc N E E For more information, see Technical Data Sheet FM2796. Progressing R G R E

L L PUMP PERFORMANCE CURVE PSIG FEET METERS

Cavity Grinder E ®

O MODEL 810/815 Z Pump 260 110

Designed for high pressure sewer systems, our 240 72 Shark® Series progressing cavity grinder 100 220 pumps offer a head capacity up to 240 feet 64 90 (73 m). Constructed of corrosion-resistant 200 2 HP 56 80 cast iron with a powder coated epoxy finish 180 and stainless steel hardware, these pumps 70 48 160 LOW PRESSURE SEWER are built for years of reliable service. The DESIGN PRESSURE (150 FT OR LESS) 140 60 thermally protected, oil-filled motor and 40

TOTAL DYNAMIC HEAD DYNAMIC TOTAL 120 external cooling fins allow the pump to 50 32 run cooler. An internal pressure relief valve 100 HEAD DYNAMIC TOTAL 1 HP protects the motor and hydraulic components from extreme 40 24 80 spikes in sewer pressure. The hardened stainless steel star 30 TYPICAL 60 OPERATING cutter provides scissor-action style cutting to virtually 16 RANGE 20 eliminate binding and roping of material around the cutter. 40 8 10 20

APPLICATIONS: 0 0 2 4 6 8 10 12 14 16 • Residential sewage removal for GALLONS LITERS 0 20 40 60 018330 pressure sewer systems FLOW PER MINUTE • Pressure sewer systems

818, 819, 820 PUMP PERFORMANCE CURVE Grinder Pumps MODELS 818/819/820 FEET 1.0, 1.5, & 2.0 HP METERS This pump is constructed of corrosion- 110 32 820 resistant cast iron with a powder 100 coated epoxy finish and stainless steel 28 hardware. The hardened stainless steel 90 ® GRINDER PUMPS Tri-Slice cutter provides scissor-action 24 80 style cutting that helps eliminate 819 70 binding and roping of material around 20 the cutter. The thermally protected, 60 oil-filled motor and external cooling fins allow 16 50 the pump to run cooler. Available in single phase 818 12 40 and three phase configurations. HEAD DYNAMIC TOTAL

U.S. Patent No. 8,562,287 Tri-Slice®, two-bladed, 30 8 high-torque cutter 20 APPLICATIONS: 4 • Residential and light commercial sewage grinder applications 10

N E • Pressure sewer systems E R 0 G 5 10 15 20 25 30 35 40 45 50 55 R U.S. GALLONS E

L LITERS SPECIFICATIONS: L 0 20 40 60 80 100 120 140 160 180 200

E ®

O ® Z FLOW PER MINUTE • Tri-Slice , two-bladed, high-torque cutter 154108 • Scissor-style cutting action shreds solids down to 7/32” (5 mm) and smaller • 1-1/4” NPT discharge • Rockwell C55-60 hardened 440C stainless steel cutter and disc For more information, see Technical Data Sheet FM2798. • Vortex impeller © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 21 • Model 840 AUTO-REVERSING star-cutter eliminates clogging • Rockwell C55-60 hardened 440C stainless steel cutter and disc 840, 841, 842 • Vortex impeller • Hazardous location/explosion proof version available 2 HP Grinder Pumps, For more information, see Technical Data Sheet FM2799. Reversing & Single Directional

FEET HEAD CAPACITY CURVE METERS Constructed of corrosion-resistant cast MODEL 840/841/842 iron with a powder coated epoxy finish and 130

stainless steel hardware, built for years of 120 36 reliable service. The thermally protected, 110 oil-filled motor and external cooling fins 32 allow the pump to run cooler than most. 100

28 The hardened 440C stainless steel star 90 shaped cutter provides scissor-action 80 style cutting that helps eliminate binding 24 N E 70 and roping of material around the cutter. E R 20 G ® R The 840 Shark (excludes 841/842) offers E 60

L E

® HEAD DYNAMIC TOTAL O 16 the industry’s only automatic, reversing Z 50 impeller and cutter assembly that virtually doubles the service life of ordinary grinder. 12 40

APPLICATIONS: 30 • Residential, commercial and municipal 8 sewage grinder 20 4 pump systems 10 842 840 841

• Pressure sewer systems 0 10 20 30 40 50 60 70 GALLONS LITERS SPECIFICATIONS: 0 40 80 120 160 200 240 • Double shaft seal for added protection FLOW PER MINUTE 016532 • Moisture detection and temperature protection • 1-1/4” NPT discharge

932 Simplex Replacement Grinder PUMP PERFORMANCE CURVE PSIG FEET The Progressing Cavity Grinder Replacement METERS Pump easily adapts to a competitors’ system. MODEL 810/815 260 The oil-filled, hermetically sealed, cool run 110

motor design and hardened stainless steel cutter 240 TOTAL DYNAMIC HEAD/FLOW 72 ensure long life and minimal maintenance. Unit 100 PER MINUTE comes completely assembled with check valve, 220 Feet Meters Gal. Liters 64 90 5 1.5 14.6 55 anti-siphon valve, pressure relief valve, quick 200 2 HP 10 3.0 14.4 55 disconnect plumbing coupling and electrical 20 6.1 14.0 53 56 80 MODEL 40 12.2 13.2 50 180 60 18.3 12.5 47 receptacle fitting. Includes high level alarm as 810 80 24.4 11.7 44 70 100 30.5 10.9 41 an added convenience. 48 160 LOW PRESSURE SEWER 120 36.6 10.1 38 DESIGN PRESSURE (150 FT OR LESS) 140 42.7 9.4 36 APPLICATIONS: 140 60 150 45.7 9.0 34 40 160 48.8 8.6 33 GRINDER PUMPS • Retrofit for existing progressing cavity grinder 120 MODEL 180 54.9 7.8 30 50 200 61.0 7.0 27 systems 32 815 220 67.1 6.3 24 TOTAL DYNAMIC HEAD DYNAMIC TOTAL TOTAL DYNAMIC HEAD DYNAMIC TOTAL N 100 1 HP 240 73.2 5.5 21 E • Pressure sewer systems E 40 R G R 24 80 E L 30 L TYPICAL

E ® SPECIFICATIONS: O 60 OPERATING

Z 16 RANGE • 1-1/4” NPT discharge 20 40

• Bolts to existing progressing cavity grinder pump systems 8 10 20 • Rockwell C55-60 hardened 440C stainless steel cutter and disc For more information, see Technical Data Sheet FM2465. 0 0 2 4 6 8 10 12 14 16 GALLONS LITERS 0 20 40 60 FLOW PER MINUTE 018330 22 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 912/915 Package Systems Simplex Sewage Package Systems (job ready/preassembled)

SPECIFICATIONS: • More choices, easier installation and fast delivery • Saves labor and reduces installation errors • 2” (50 mm) solids-handling pump • 2” PVC discharge pipe, 30” (76 cm) long on 18” x 30” (46 x 76 cm), 24” (61 cm) long on 24” x 24” (61 x 61 cm) and 36” (91 cm) long on 24” x 36” (61 x 91 cm) • Basins - polyethylene, poly-foam or fiberglass construction with poly or solid steel covers and 4” pipe seal hub, 4” PVC hub (deluxe) or 4” cast iron hub on L.A. Code Systems • Check valve options - 30-0151, 30-0020, 30-0021, 30-0101 or 30-0103 (not included) 912-0007 shown • Systems available with alarms and preinstalled alarm float. • Premium indoor systems have a split cover for easy pump inspection, torque stops and an anti-flotation device. • Side discharge systems rated for outdoor burial: solid polyethylene structural foam lid and basin with 2” discharge on side • 3/16” (5 mm) vent hole drilled

PUMP PERFORMANCE CURVE METERS FEET See FM2810 for further information. MODEL 803/805/807

60 18

55 16 METERS FEET PUMP PERFORMANCE CURVE 50 211/264/266 MODELS 807 14 45 25

12 40 805 6 20 35 10 15 30 4 803

TOTAL DYNAMIC HEAD DYNAMIC TOTAL 8 25 10

TOTAL DYNAMIC HEAD TOTAL 266 2 264 6 20 211 5 OTHER PRODUCTS 15 4

0 10 20 40 60 80 100 120 140 2 GALLONS 5 LITERS 0 80 160 240 320 360 400 FLOW PER MINUTE 0 5 10 15 20 25 30 35 40 45 50 GALLONS LITERS 0 20 40 60 80 100 120 140 160 180 009969B FLOW PER MINUTE 153604 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 23 QLS Series®

Complete effluent sewage or grinder package systems are factory assembled for quicker, easier installation at the jobsite. Zoeller’s Z-Rail® Technology with powder coated, ductile iron elbows and brackets provides longer life and reliability. Dual-rail system offers added support and stability while raising and lowering pumps compared to single-rail systems. A wide variety of basin diameters and depths are stocked to accommodate almost any job. Cover choices include solid fiberglass and either steel or aluminum hatches. Z-Rail® System Both the disconnect portion and the upper guide rail supports are made of domestic epoxy powder coated ductile iron, providing superior strength. Dual guide rails add stability, ensuring that the pump will not spin on the rail during installation or removal. Basin Zoeller Company stocks many different basin and cover options to fit a multitude of wastewater collection projects. Basin sizes from 24” x 48” to 48” x 120” meet most application needs. Customized packages available. Basin Cover Solid fiberglass, aluminum hatch, and steel hatch covers are stocked for QLS Series® packages. Three Way Ball Valve The QLS Series® systems utilize a 3-way ball valve in duplex configurations. The valve is positioned so that the service providers can easily isolate pumps without entering the basin. Pipe Seal Hub A 4” pipe seal is provided as a convenient field-installed inlet hub. AFD QLS Series® basins come with an anti-floatation collar to resist bouyancy in high groundwater locations. Flex-Boot Discharge Connection A flexible, stable discharge seal remains watertight despite external pressures due to pipe settling. Schedule 80 PVC Piping Schedule 80 PVC discharge piping provides greater support and dependability with its thicker walls and higher pressure rating. Engineered Lift Stations Zoeller offers a complete line of prepackaged and preassembled lift stations using sump, effluent, sewage or grinder pumps! Utilizing everything from a small 1/2 HP pump to the large 7-1/2 HP non-clogging pump, Zoeller will prefabricate any lift station as an engineered factory built system. The headache of keeping track of product compatibility is eliminated, and the contractor is ensured that each system’s components will properly operate with

Unassembled Model 105

Preassembled Model 105

These are our most versatile water collection systems. No need to dig a sump pit or re-route plumbing drain lines. This compact system includes everything you need to remove water from areas without gravity drains. Excellent for bar sinks, laundry trays or condensate removal. There are no inlet filters to clean, and easy compression fittings make for quick and trouble-free installations. As an added bonus, the P-trap can be located inside the tank if necessary. APPLICATIONS: METERS • Under bar N FEET PUMP PERFORMANCE CURVE E E R 104/105/106/110/115/120/131/132 • Beauty salon / parlors G R 25 E

• Work sinks L

E ® O

• Laundry trays Z 6 20

15 SPECIFICATIONS: 4 • 1-1/2” NPT discharge with 1-1/2” threaded vent 10

TOTAL DYNAMIC HEAD TOTAL 2 • 5 gallon (19 liter) capacity poly basin 5 104/132 105/106/ 131 • Includes 1-1/2” check valve 110/115/120 0 10 20 30 40 50 60 70 80 GALLONS

For more information, see Technical Data Sheet FM2801. LITERS 0 80 160 240 009898 FLOW PER MINUTE 104 105 106 110 115 120 131 132

Preassembled N Y/N N N N N N Y Pump Model M72 M53 M63 M55 M57 M59 M98 M72 Pump Engineered Cast iron with All cast iron Bronze with All cast iron All bronze All cast iron Engineered Construction plastic plastic base plastic base plastic

HP 1/3 3/10 3/10 3/10 3/10 3/10 1/2 1/3 OTHER PRODUCTS AMPS 3.1 9.7 9.7 9.7 9.7 9.7 9.4 3.1 RPM 3400 1550 1550 1550 1550 1550 1725 3400 Solids passing 3/8” (9 mm) 1/2’’ (12 mm) 1/2’’ (12 mm) 1/2’’ (12 mm) 1/2’’ (12 mm) 1/2’’ (12 mm) 1/2’’ (12 mm) 3/8” (9 mm) Max temp. 110 °F 130 °F 130 °F 130 °F 130 °F 130 °F 130 °F 110 °F (43 °C) (54 °C) (54 °C) (54 °C) (54 °C) (54 °C) (54 °C) (43 °C) Cord length 9’ (2.7 m) 9’ (2.7 m) 9’ (2.7 m) 9’ (2.7 m) 9’ (2.7 m) 9’ (2.7 m) 15’ (4.6 m) 9’ (2.7 m) Check valve All systems include a check valve (except Model 104). Preassembled systems include a space-saving, internal check valve threaded into the discharge of the pump. Warranty 2yr 3yr 5yr 1yr 3yr 1yr 3yr 2yr © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 25 Qwik Jon® Sewage Removal Series® Economical sewage systems designed for free-standing or built-in installation.

• Allows you to add a bathroom in previously unplumbed locations • Choose an easy install as a freestanding unit or as a discrete installation behind the wall • Non-clogging vortex impeller for reliable operation • Collects used water from all fixtures including sinks, faucets, tubs, showers, and more • Automatic reset protects the pump from thermal overload • No gravity drain required • Smooth surface for easy cleaning

Qwik Jon® SPECIFICATIONS: • Powerful 1/2 HP grinder pump • 1” NPT discharge (can reduce down to 3/4”) • Engineered to never need cleaning and to remain maintenance-free • Discharge can be oriented in any direction Model 204 for shower only • Cutter assembly of hardened steel • Thermally protected motor Model 202 cutaway • Available with right or left hand flush U.S. Patent Nos. 7,203,976; 8,562,287; 9,352,327 Canadian Patent No. 2,512,023;

PUMP PERFORMANCE CURVE METERS For more information, see Technical Data Sheet FM2800. FEET MODEL 202/203/204 35 10 30 ® (Model 202) - for all Qwik Jon® models. Qwik Jon Toilet 8 • ADA compliant elongated bowl 25

• EPA Water Sense compliant toilet with 1.28 gallon (4.8 l) 6 20

per flush Includes flush handle, fill and flush valve HEAD DYNAMIC TOTAL 15 • Rear spigot toilet for direct connection to any Qwik Jon® 4 model. 10 2 5

0 5 10 15 20 25 30 35 40 45 50 GALLONS LITERS 0 20 40 60 80 100 120 140 160 180 FLOW PER MINUTE 018512

Optional Extension Kit (p/n 10-3050) - for p/n# 202-3002 recessed or behind-the-wall installations. Can be used with all Qwik Jon® models

Qwik Jon® SPECIFICATIONS: • A quiet, preassembled 1/2 HP grinder pump system Model 201 - 60Hz • Carbon/ceramic mechanical shaft seal for long life 115V/60Hz Upper and lower ball bearings for efficient and quiet operation 5 1.5 45 170.3 • Non-clogging10 3.0 vortex39 impeller147.6 for reliable operation15 4.6 33 124.9 20 6.1 25 94.6 p/n# 201-0006 • Withstands25 total 7.6 immersion13 49.2 (IP68) • 1” Discharge elbow with29.5ft (9m)built-in check valve • Standard 6’ (1.8 m) cord with right angle plug • Tri-Slice® Cutter Technology - three independent cutting channels provide over 250,000 cuts per minute • Premium investment-cast 440C stainless steel cutter and cutter plate • Flushables: toilet paper, organic waste, and sanitary items • For residential and light commercial applications For more information, see Technical Data Sheet FM3344. 084975 Model 204 for shower only Qwik Jon®

SPECIFICATIONS: • A quiet, preassembled 1/3 HP pump and macerator system • Carbon/ceramic mechanical shaft seal for long life • Upper and lower ball bearings for MODEL 200 - 60 Hz efficient and quiet operation • Non-clogging vortex impeller for reliable operation 115V/60Hz Recessed side handles for carrying p/n# 200-0006 • • Convenient snap-fit covers for easy 5 1.5 33.0 124.6 access to 10macerator3.0 29.6 112.0 and electrical15 junction4.6 23.1 box 87.6 • Discharge20 elbow6.1 with 14.3built-in54.0 check valve 26.25ft (8.0m) • Standard 6’ (1.8 m) cord • Flushables: toilet paper and organic

waste OTHER PRODUCTS • For residential applications For more information, see Technical Data Sheet FM3343.

084825

Model 519 and Model 522 This fully automatic, easily installed, condensate pump removes condensation from air conditioning equipment, condensing furnaces, dehumidifiers, ice makers, water coolers and refrigeration systems.

APPLICATIONS: Automatically removes condensation from a variety of systems Model 519 including air conditioning units, dehumidifiers and refrigeration systems.

SYSTEM INCLUDES: • Handles condensate up to 140 °F (60 °C) • 20 ft (6.1 m) TDH • Wall mounts • Four inlet options (Model 519), two inlet options (Mode 522) • 3/8” Discharge • Stainless steel shaft • Built-in safety switch and check valve • 6 ft power cord with ground • Thermally protected • Option available to include 20’ of 3/8” clear tubing • Built-in check valve • Safety switch and alarm indicator lights • Oversized reservoit Model 522

For more information, see Technical Data Sheet FM2808. METERS

FEET PUMP PERFORMANCE CURVE METERS FEET PUMP PERFORMANCE CURVE MODEL 519 MODEL 522

21 21 6 6 18 18

15 15

4 4 12 12 TOTAL DYNAMIC HEAD DYNAMIC TOTAL TOTAL DYNAMIC HEAD 9 9

2 2 6 6

3 3

0 0 10 20 30 40 50 60 70 80 90 100 110 120 10 20 30 40 50 60 70 80 90 100 110 120 GALLONS GALLONS LITERS LITERS 0 80 160 240 320 400 0 80 160 240 320 400 FLOW PER HOUR FLOW PER HOUR 155405 155802 OTHER PRODUCTS OTHER 28 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com CrawlCrawl Space®Space System

Moisture and Mold Protection This system is designed specifically with tight or restricted spaces in mind. Indoors or outdoors, eliminate standing water from areas without proper drainage. Prevent the accumulation of moisture, fungus, and odors commonly found in residential crawl spaces. The perforated basin and solid lid keep large debris from entering the pit, eliminating maintenance.

APPLICATIONS: • Dewatering in crawl spaces

• Dewatering under mobile homes METERS FEET PUMP PERFORMANCE CURVE SYSTEM INCLUDES: MODEL 108/138 N 25 E • Automatic pump E R G R • 24’ (7 m) hose E L 20

L 6

E ® O • Tank assembly Z 15 4 138 For more information, see Technical Data Sheet FM2802. 10 TOTAL DYNAMIC HEAD DYNAMIC TOTAL 108 W/53 PUMP 2 108 W/49 PUMP 5

0 10 20 30 40 50 60 70 80 GALLONS LITERS 0 80 160 240 FLOW PER MINUTE 151403

109 Scale Removal Series

® SCALE REMOVAL SRS SYSTEM This preassembled system is engineered to meet the flushing requirements of tankless water heaters. An internal, reusable filter sock captures debris removed from the pipe system. A durable, air-filled 1/6 HP submersible pump and 3/4” stainless steel braided flush lines ensure quality and reliability for years of trouble-free performance. Recommended by TANKLESS professionals job after job, this system is an ideal and economical tool WATER HEATER for plumbing contractors who install and service tankless water heating HOT WATER SERVICE VALVE systems. 120 V OUTLET COLD WATER Patent pending RETURN LINE SERVICE VALVE

PUMP POWER COLD WATER CORD SUPPLY VALVE APPLICATIONS: WATER HEATER OTHER PRODUCTS OUTLET VALVE • Removes line build-up in tankless water heating units COLD WATER IN

SYSTEM INCLUDES: HOT WATER OUT • 1/6 HP pump HANDLE • Stainless steel braided hoses PUMP DISCHARGE LINE TANK ACCESS • Poly tank with sealed cover CONNECTIONS SCALE REMOVAL SYSTEM • Fittings STRAINER PUMP SK2793 For more information, see Technical Data Sheet FM2807. ELEMENT

Engineered to recognize the difference between water and oil, these systems help protect the environment and equipment from the dispersion of oils and/or hydrocarbons by only pumping water. ® They are perfect for elevator sumps, transformer vaults, or other applications where there is a need to remove water containing Guard oil. Independently verified by OnSpeX, division of CSA, the Oil Guard® includes one of four pump models, Oil Smart® Pump Switch and alarm. Multiple features and options are available including NEMA-4X alarm panel enclosure, audible and light alarms and dry contacts. Turn this product into a connected device using the Z Control® Cloud. Monitor dry contacts to recieve email, text, and push notifications.

APPLICATIONS: • Elevator vaults • Transformer vaults • Boat hulls

SPECIFICATIONS: • NEMA 4X alarm panel includes dry contacts for remote alarm • Elevator systems require a minimum 50 GPM (189 LPM) and a maximum 6’ (2 m) pump cord • Custom systems available For more information, see Technical Data Sheet FM2809. For complete productinformation, visit: zoellerpumps.com

PUMP PERFORMANCE CURVE MODELS 57/152/153/161 FEET METERS 60 18

55 16 50

14 45

12 40

10-2149 35 Simplex panel 10 30 TOTAL DYNAMIC HEAD DYNAMIC TOTAL 8 25

6 20

10-2150 15 Duplex panel 4 10

2 5 57 152 153 161

0 10 20 30 40 50 60 70 80 90 100 110 GALLONS LITERS 0 40 80 120 160 200 240 280 320 360 400

This series of submersible pumps is designed for use in residential or commercial dewatering applications and can be used to transfer groundwater and wastewater. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to meet specifications with assurance by using high temperature parts rated for continuous 200 °F (93 °C) contact. Available in a variety of models and performances, each pump is 100% factory tested to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every model in this pump series, making it one of the most reliable in the industry. APPLICATIONS: • Commercial laundry facilities • Boiler blow down application • Maintenance facilities SPECIFICATIONS: • 2000 Series rated for intermittent 200 °F (93 °C) • 3000 Series rated for continuous 200 °F (93 °C) • 1-1/2” – 3” NPT discharge • 3/10 HP through 1/2 HP

• Available in automatic or nonautomatic Model 2057 Model 3098 For more information, see Technical Data Sheet FM2811.

Agricultural • 1-1/2” (38 mm) spherical solids capacity with bronze Models 4290 and 4291 vortex impeller • Tandem seals with silicon carbide/silicon carbide High Head Pump lower seal and carbon/silicon carbide upper seal This series of submersible sewage pumps is For more information, see Technical Data Sheet FM2812. designed for use in agricultural applications, lagoon recirculation systems, and sump pit systems. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and a hermetically sealed, oil-filled motor housing that PUMP PERFORMANCE CURVE FEET METERS MODEL 4290/4291 provides great heat dissipation and keeps the pumps running 70 cooler. The non-clogging vortex impeller design reduces the 20 65

60 risk of clogging and provides great solids passing capability. 18 Pontoons and floats are available. 55 16 N 50 E E APPLICATIONS: R 14 G 45 • Specifically designed orf lagoon or sump pit applications R E L 40

L 12

E ® 4291 O • Farming industry Z 35 10

• Agricultural industry HEAD DYNAMIC TOTAL 30 OTHER PRODUCTS 8 SPECIFICATIONS: 25 4290 20 • 2” NPT discharge (available with 3” NPT bolt-on flange) 6 15 4

• 1/2 HP through 1 HP 10

2 • Not available as an automatic 5

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 GALLONS For complete product information, visit: LITERS 0 80 160 240 320 400 480 560 640 720 FLOW PER MINUTE 010652 zoellerpumps.com © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 31 Aeration/Fountain Model 370 This aeration and fountain pump adds a unique focal point and value to your property. The environmentally friendly, water-cooled motor eliminates pollution risk and pond contamination. The continuous-duty pump operates in 5’ (1.5 m) or more of water and aerates up to 4,900 gallons (22,276 L) per hour. It produces a water fountain up to 15’ (5 m) in height, and it includes three easily interchangeable patterns. The flotation system incorporates a UV-resistant, polyethylene float and eye-bolts for anchoring.

APPLICATIONS: • Golf courses • Subdivisions • Office parks • Reduces mosquitoes • Helps eliminate stagnant water

SPECIFICATIONS: Sky Cannon • Preassembled with 100’ (30 m) GFCI protected power cord

For more information, see Technical Data Sheet FM2813.

Water Lily

Water Trumpet OTHER PRODUCTS OTHER

See pages 3, 4 UTILITY, PEDESTAL Gallons per minute (GPM) @ Height Std. Cord Shut Model HP Discharge Volts Ph Operation Length Width Height Weight Off (ft.) 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 30 ft. 42 1/6 1” 115 1 Non 9 ft. 6” 9-1/2” 7.3 15 11 6 ------19 44/LM44 1/4 1” 115 1 Non 9 ft. 6” 11-3/4” 7.7/8.7 30 22 12 ------20 46 1/2 2” 115 1 Non 9 ft. 8” 14-1/2” 16 55 47 37 25 5 -- 33 311 1/2 hose 115 1 Non 6 ft. 7.75 Maximum flow @ 1 ft. Head = 5.6 GPM 39 314 1/2 hose 115 1 Non 9 ft. 17 21 20 19 ------23

81 1/3 1-1/4” 115 1 Auto 7-1/2 ft. 9.55 31-1/4” 15 50 36 10 ------16 82 1/3 1-1/2” 115 1 Auto 7-1/2 ft. 9.55 31-3/4” 19 52 41 12 ------17 84 1/2 1-1/2” 115 1 Auto 7-1/2 ft. 9.55 32-1/2” 22.5 59 51 38 17 -- -- 24

See pages 5-10 SUMP, EFFLUENT, DEWATERING

Double Auto Std. Gallons per minute (GPM) @ Height Shut Model HP Discharge Volts Ph Operation Seal Cord Width Height* Off Option Length 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 30 ft. 35 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. (ft.) 49 1/4 1-1/2” 115 1 Auto 9 ft. 8-3/32” 10-1/2” 32 25 10 ------18 53, 55 Auto/ 10- 57, 59 3/10 1-1/2” 115, 230 1 Non 9 ft. 3/32” 10-1/6” 43 34 19 ------19.25 10- 63 3/10 1-1/2” 115 1 Auto 10 ft. 3/32” 10-1/6” 43 34 19 ------19.25 73 1/3 1-1/2” 115 1 Auto 9 ft. 8-3/32” 11” 38 30 14 ------18

75 1/2 1-1/2” 115 1 Auto 10 ft. 8-3/32” 12 -3/8” 50 40 30 17 ------25

95 1/2 1-1/2” 115 1 Auto 15 ft. 10-1/8” 12” 80 68 50 28 5 ------26 Auto/ 98 1/2 1-1/2” 115, 230 1 Non 15 ft. 10-1/8” 12” 72 61 45 25 ------23 115, 230, 137, 1/2 1-1/2” 200-208, 1, 3 Auto/ 10 ft. 12-1/4” 12-3/4” 93 79 64 36 8 ------26 139 460 Non P 10- 12- 140 1 1-1/2” 115, 230 1 Non 20 ft. 3/16” 13/32” 86 80 73 66 59 49 38 28 ------50 P 10- 12- 145 3/4 1-1/2” 115 1 Non 20 ft. 3/16” 13/32” 56 55 53 57 48 48 40 35 26 16 -- -- 74 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. Auto/ 151 1/3 1-1/2” 115, 230 1 Non 20 ft. 11” 16 1/2” 50 45 38 29 16 ------30 Auto/ 152 4/10 1-1/2” 115, 230 1 Non 20 ft. 11” 16 1/2” 69 61 53 44 34 23 ------38 Auto/ 153 1/2 1-1/2” 115, 230 1 Non 20 ft. 11” 16 1/2” 77 70 61 52 42 33 22 ------44 115, 230, 161 1/2 1-1/2” or 200-208, 1, 3 Auto/ P 20 ft. 12-3/4” 18-9/16” 100 93 86 79 71 62 45 20 ------56 2” or 3” 460, 575 Non 1-1/2” or 115, 230, Auto/ 163 1/2 200-208, 1, 3 P 20 ft. 12-3/4” 18-9/16” 61 60 60 59 57 55 46 33 15 ------66 2” or 3” 460, 575 Non 230, 200- Auto/ 165 1 1-1/2” or 208, 460, 1, 3 P 20 ft. 12-3/4” 18-9/16” 61 60.5 60.3 60 59 58 55 50 39 22.5 10 -- 86.5 2” or 3” 575 Non 5 ft. 10 ft. 20 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. 100 ft. 110 ft. 230, 200- 185 1 1-1/2” or 208, 460, 1, 3 Auto/ P 20 ft. 12-3/4” 18-9/16” ------85 70 51 32 9 ------73 2” or 3” 575 Non 1-1/2” or Auto/ P 186 1-1/2 2” or 3” 230, 460 1, 3 Non 20 ft. 12-3/4” 18-9/16” 58 58 58 58 58 58 58 52 45 30.5 16 4 114 230, 200- 188 1-1/2 1-1/2” or 208, 460, 1, 3 Auto/ P 20 ft. 12-3/4” 18-9/16” 145 140 128 116 103.5 90 71 51 28 2 -- -- 91 2” or 3” 575 Non 230, 200- 189 2 1-1/2” or 208, 460, 1, 3 Auto/ P 20 ft. 12-3/4” 18-9/16” 145 140 130.5 120 109 97 85 69 51 34 17 -- 110 2” or 3” 575 Non 5 ft. 10 ft. 20 ft. 30 ft. 40 ft. 60 ft. 80 ft. 90 ft. 100 ft. 110 ft. 120 ft. 130 ft. 1-1/2” or 191 2 2” or 3” 230 1 Non 20 ft. 12-3/4” 18-9/16” 45 45 45 45 45 45 45 45 40 30 20 10 137

* Single Seal Units

NOTES: • BN/BE Models available packaged with a piggyback variable level float switch. • A double shaft seal available on 140, 160 & 180 series.

See pages 11-14 SEWAGE & DEWATERING

Double Std. Gallons per minute (GPM) @ Height Shut Model HP Discharge Volts Ph Operation Seal Cord Width Height* Off Option Length 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. (ft.)

212 1/2 2” 115 1/2 Auto 10 ft. 9-7/8” 15-7/8” 82 53 32 ------19.5 Auto/ 264 4/10 2” 115, 230 1 Non 15 ft. 13-9/64” 14-3/4” 90 60 23 ------18 266, 1/2 2” 115, 230, Auto/ 10 ft./ 267 200-208, 460 1, 3 Non 15 ft. 13-5/32” 14-9/32” 115 85 45 10 ------20.5 270 1 2” 115, 230 1 Non P 20 ft. 13-1/16” 15” 132 101 77 56 29 ------29

282 1/2 2” or 3” 115,230, Auto/ P 10 ft./ 18- 200, 460, 575 1, 3 Non 15 ft. 13-9/16” 13/16” 127 96 64 34 6 ------26 230, P 10 ft./ 18- 284 1 2” or 3” 200, 460, 575 1, 3 Non 15 ft. 13-9/16” 13/16” 179 157 133 106 73 42 ------35 292 1/2 2” or 3” 115, 230, Auto/ P 200, 460, 575 1, 3 Non 20 ft. 12-7/8” 18-9/16” 135 120 104 87 70 51 ------40 230, 200, Auto/ P 293 1 2” or 3” 460, 575 1, 3 Non 20 ft. 12-7/8” 18-9/16” -- -- 122 111 99 85 51 6 ------51 230, 200, Auto/ P 294 1-1/2 2” or 3” 460, 575 1, 3 Non 20 ft. 12-7/8” 18-9/16” 196 181 165 150 136 124 99 67 16 ------62 230, 200, Auto/ P 295 2 2” or 3” 460, 575 1, 3 Non 20 ft. 12-7/8” 18-9/16” 214 199 186 173 161 149 124 98 66 23 -- -- 75 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 30 ft. 35 ft. 40 ft. 45 ft. 50 ft. 55 ft. 60 ft.

404 2 4” 230, 200-208, P 460, 575 1, 3 Non 20 ft. 16-1/8” 26” 300 265 224 184 134 60 ------33 230, 200, P 405 3 4” 460, 575 1, 3 Non 20 ft. 12-3/4” 18-9/16” 361 326 284 241 197 134 50 ------38 230, 200, 611 1 3” or 4” 460, 575 1, 3 Non Standard 25 ft. 17-9/16” 29-1/4” 255 190 110 35 ------22 230, 200, 621 1-1/2 3” or 4” 460, 575 1, 3 Non Standard 25 ft. 17-9/16” 29-1/4” 340 277 215 143 72 ------29 230, 200, 631 2 3” or 4” 460, 575 1, 3 Non Standard 25 ft. 17-9/16” 29-1/4” 385 330 275 220 150 80 ------35 230, 200, d 25 ft. 17-9/16” 29-1/4” 480 430 380 325 270 208 143 72 ------44 641 3 3” or 4” 460, 575 1, 3 Non Standar 230, 200, 651 5 3” or 4” 460, 575 1,3 Non Standard 25 ft. 17-9/16” 29-1/4” 575 533 490 440 390 335 280 220 150 80 -- -- 55 230, 200, 661 7-1/2 3” or 4” 460, 575 3 Non Standard 25 ft. 17-9/16” 29-1/4” -- 600 560 515 475 430 383 330 280 220 150 85 65

* Single Seal Units See pages 15-17 GRINDER PUMPS

Gallons per minute (GPM) @ Height Model HP Discharge Volts Ph Operation Std. Cord Width Height* Shut Length 10 ft. 30 ft. 50 ft. 70 ft. 90 ft. 110 130 150 170 190 210 220 240 Off (ft.) ft. ft. ft. ft. ft. ft. ft. ft.

810 1 1-1/4” 230 1 Non 20 ft. 15-1/4” 22-3/8” 15.3 14.2 13.2 12.3 11.5 10.5 9.6 8.7 ------150

815 2 1-1/4” 230 1 Non 20 ft. 15-1/4” 22-3/8” 15.3 14.2 13.2 12.3 11.5 10.5 9.6 8.7 7.8 6.8 5.7 5.0 4.0 240

100 110 120 Shut 5 ft. 10 ft. 20 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. ft. ft. ft. Off (ft.)

803 1/2 1-1/4” Auto/ 115, 230 1 Non 15 ft. 10-3/16” 14-3/32” 35 31 22 9 ------35 Auto/ 805 3/4 1-1/4” 115, 230 1 Non 15 ft. 10-3/16” 14-3/32” 40 37 29 20 8 ------45 Auto/ 807 1 1-1/4” 115, 230 1 Non 15 ft. 10-3/16” 14-3/32” 45 42 35 27 18 7 ------55 115, 230, Auto/ 818 1 1-1/4” 200, 460, 1, 3 20 ft. 11-5/8” 18-5/8” 43 42 37 28 16.5 ------53 575 Non 230, 200, Auto/ 819 1-1/2 1-1/4” 460, 575 1,3 Non 20 ft. 11-5/8” 18-5/8” 43 43 43 42 39 32 22 12 ------81 230, 200, Auto/ 820 2 1-1/4” 460, 575 1, 3 Non 20 ft. 11-5/8” 18-5/8” 46 46 46 46 46 46 43 36 27 16.7 7 -- -- 107 230, 200, 11- 840 2 1-1/4” 460, 575 1, 3 Non 20 ft. 21/32” 24-7/32” 45 45 45 44 42 36 30 23 16 10 3 -- -- 104 230, 200, 841 2 1-1/4” 460, 575 1, 3 Non 20 ft. 13-3/16” 22” 54 54 54 54 54 52 49 43 36 28 19 11 4 125 230, 200, 11- 842 2 1-1/4” 460, 575 1, 3 Non 20 ft. 11/16” 23-3/4” 34 34 34 34 34 34 34 32 29 25 20 13 4 125

* Single Seal Units NOTES: • BN/BE Models available packaged with a piggyback variable level float switch. • A double shaft seal available on 280, 290, 400 & 600 series.

HAZARDOUS LOCATION See our full line in FM2856

Gallons per minute (GPM) @ Height Std. Cord Non Shut Off Model HP Discharge Volts Ph Operation Length Width Auto ft. Height* 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. 115, 230, X161 1/2 1-1/2” 200-208, 1, 3 Auto/ 20 ft. 13-5/16” 22” 100 93 85 79 70 62 45 20 ------56 2” or 3” 460, 575 Non 115, 230, X163 1/2 1-1/2” 200-208, 1, 3 Auto/ 20 ft. 13-5/16” 22” 61 61 60 59 57 55 46 33 15 ------66 2” or 3” 460, 575 Non 230, 200- X165 1 1-1/2” 208, 460, 1, 3 Auto/ 20 ft. 13-5/16” 22” 61 61 61 60 59 58 55 50 39 23 10 -- 86.5 2” or 3” 575 Non 5 ft. 10 ft. 20 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. 100 ft. 110 ft. 230, 200- X185 1 1-1/2” 208, 460, 1, 3 Auto/ 20 ft. 13-3/16” 22” ------85 70 51 32 9 ------73 2” or 3” 575 Non 1-1/2” 200, 230, Auto/ X186 1-1/2 2” or 3” 460 1, 3 Non 20 ft. 13-3/16” 22” 58 58 58 58 58 58 58 52 45 30.5 16 4 114 230, 200- X188 1-1/2 1-1/2” 208, 460, 1, 3 Auto/ 20 ft. 13-3/16” 22” 145 140 128 116 103.5 90 71 51 28 2 -- -- 91 2” or 3” 575 Non 230, 200- X189 2 1-1/2” 208, 460, 1, 3 Auto/ 20 ft. 13-3/16” 22” 145 140 130.5 120 109 97 85 69 51 34 17 -- 110 2” or 3” 575 Non 10 ft. 20 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. 100 ft. 110 ft. 120 ft. 130 ft. 1-1/2” Auto/ X191 2 2” or 3” 230 1 Non 20 ft. 13-3/16” 22” 45 45 45 45 45 45 45 45 40 30 20 10 137 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 30 ft. 35 ft. 45 ft. 50 ft. 55 ft. 60 ft. 65 ft.

115, 230, X282 1/2 2” or 3” 200, 460, 1, 3 Auto/ 20 ft. 13-9/16” 22-1/4” 127 96 64 34 6 ------26 575 Non 230, X284 1 2” or 3” 200, 460, 1, 3 Auto/ 20 ft. 13-9/16” 22-1/4” 179 157 133 106 73 42 ------35 575 Non 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. 115, 230, X292 1/2 2” or 3” 200, 460, 1, 3 Auto/ 20 ft. 13-5/16” 22” 135 120 104 87 70 51 ------40 575 Non 230, 200, Auto/ X293 1 2” or 3” 460, 575 1, 3 Non 20 ft. 13-5/16” 22” -- -- 122 111 99 85 51 6 ------51 X294 1-1/2 2” or 3” 230, 200, Auto/ 460, 575 1, 3 Non 20 ft. 13-5/16” 22” 196 181 165 150 136 124 99 67 16 ------62 230, 200, Auto/ X295 2 2” or 3” 460, 575 1, 3 Non 20 ft. 13-5/16” 22” 214 199 186 173 161 149 124 98 66 23 -- -- 75 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 30 ft. 35 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft.

230, 200, 25- X404 2 4” 460, 575 1, 3 Non 20 ft. 16-1/8” 15/16” 300 265 224 184 134 60 ------33 230, 200, 25- X405 3 4” 460, 575 1, 3 Non 20 ft. 16-1/8” 15/16” 361 326 284 241 197 134 50 ------38 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 30 ft. 35 ft. 40 ft. 45 ft. 50 ft. 55 ft. 60 ft.

230, 200, X611 1 3” or 4” 460, 575 1, 3 Non 25 ft. 17-9/16” 33-1/4” 255 190 110 35 ------22 230, 200, X621 1-1/2 3” or 4” 460, 575 1, 3 Non 25 ft. 17-9/16” 33-1/4” 340 277 215 143 72 ------29 230, 200, X631 2 3” or 4” 460, 575 1, 3 Non 25 ft. 17-9/16” 33-1/4” 385 330 275 220 150 80 ------35 230, 200, X641 3 3” or 4” 460, 575 1, 3 Non 25 ft. 17-9/16” 33-1/4” 480 430 380 325 270 208 143 72 ------44 230, 200, X651 5 3” or 4” 460, 575 1, 3 Non 25 ft. 17-9/16” 33-1/4” 575 533 490 440 390 335 280 220 150 80 -- -- 55 230, 200, X661 7-1/2 3” or 4” 460, 575 3 Non 25 ft. 17-9/16” 33-1/4” -- 600 560 515 475 430 383 330 280 220 150 85 65 5 ft. 10 ft. 20 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. 100 ft. 110 ft.

230, 200, 11- X840 2 1-1/4” 460, 575 1, 3 Non 20 ft. 21/32” 26-1/8” 45 45 45 44 42 36 30 23 16 10 3 -- 104 230, 200, X841 2 1-1/4” 460, 575 1, 3 Non 20 ft. 11-5/8” 25-3/4” 54 54 54 54 54 52 49 43 36 28 19 11 125 230, 200, X842 2 1-1/4” 460, 575 1, 3 Non 20 ft. 11-5/8” 25-3/4” 34 34 34 34 34 34 34 32 29 25 20 13 125

PACKAGE SYSTEMS See our full line in FM2819

Assembled or Model Pumps Available Volts Basins Sizes Available Check Valve Included Preassembled Simplex Systems 910 264, 267 115, 230 18” x 30” 2” Cast Iron or PVC Unassembled 18” x 30”, 24” x 24” 912 211, 264, 266 115, 230 Not Included Preassembled 24” x 30”, 24” x 30”

Duplex Systems 910 264, 267 115, 230 30” x 36” 2” Tri-Check® Unassembled

Preassembled Sewage System Duplex Systems 912 211, 264, 266 115, 230 24” x 24” Not Included Preassembled Grinder Systems Preassembled Grinder System 915 801, 803, 805, 807 115, 230 18” x 30”, 24” x 24” Included Preassembled

922 820, 840 230/1 Ph 24” x 36”, 36” x 96” Included Preassembled 460/3 Ph Preassembled 932 810 230/1 Ph 24” x 36”, 36” x 96” Included Preassembled Systems

POTABLE SYSTEMS See our full line in FM2487 Stainless Steel/Cast Iron “A” Series 4” Submersible Pumps

With models rated for small homes, cottages and light water usage demands as well as average residential home and family usage, this series of stainless steel pumps provides economical, quiet operation (see FM2489). Cast Iron Shallow Well and Deep Well Jet Pumps

Series of precision jet pumps designed to provide city water pressures for modern rural living (see FM2487). Irrigation Pumps

Provide up to 88 GPM (333 LPM) for moving large volumes of water quickly. Heavy duty, rugged construction (see FM2487). Centrifugal Pumps

Potable, multi-stage water pumps for high head applications. Designed for booster service, water circulation, cooling systems, laundry equipment and liquid transfer applications (see FM2487). City Water Booster Pumps

All-in-one unit, consisting of pump, motor, stainless steel pressure tank and electronic controller (see FM3252).

For complete product information, visit: zoellerpumps.com

SmartPak® Plus This residential alternator system allows you to install two automatic pumps up to 1/2 HP, 115 V, 12 amps, single phase and alternate their use to provide extended pump life. The special design allows for use in humid areas such as basements, and the true alternation allows each pump to be used equally, not timed. The built- in alarm automatically sounds if one of the pumps should fail and calls for the second pump to run during a pump failure (see FM1663). Control Panels & Alarms Zoeller offers a full line of controls and alarms specifically engineered to match our pumps and pump systems. From the most basic indoor alarm to highly advanced custom-built panels, we can meet virtually any specification. Standard simplex and duplex panel features include auto & manual run capabilities, high water alarm and remote monitoring contacts in both indoor and outdoor enclosures. Level sensing floats are included on most panels and alarms as an added value.

Electrical control panels used in simplex and duplex applications that require more than a preset integral or piggy-back float switch can provide. All weather enclosures, built-in alarm systems with remote capability, and manual run override are basic features on most units. Panels with intrinsically safe circuits are available for use with explosion-proof rated pumps in hazardous areas (see FM1596, FM0486, & FM1705) Float Switches Zoeller has a full line offering of pump and control switches for pump up and down applications. Constructed of PVC/Poly and available in various lengths. Both mechanical and mercury models are available. UL listed (see FM0526 & FM0477).

Check Valves Zoeller check valves are quiet, reliable and efficient.

Whether a residential or commercial application, there is a correct Zoeller valve, including silent check valves, ball-check combinations, hi-temperature and much more. Our most popular residential valve #30-0181, has an angled internal flapper to eliminate water hammer, and the body is sonic welded to increase its life. Our cast iron threaded check valve can withstand up to 115’ (35 m) of head. (see FM0217).

The Zoeller “Full-Flow” Unicheck features flexible neoprene slip x slip unions with all stainless steel clamps and screws. Saves installation time and is simple to install. No pipe threading required. Features an extra wide flapper hinge to prevent hinge stress. Can be installed in a vertical or horizontal line. Available in cast iron or PVC construction. Tri-Check ® and The “Combo” The Zoeller full flow Tri-Check® and “Combo” feature a threaded union that allows the pump to be removed without disrupting discharge piping. This saves time and money and is easy to install. The neoprene gasket and flapper are weighted with stainless steel backing plates and stainless steel rivets and can be installed on either a vertical or horizontal pipe (see FM0217). Flood Alert® A low water sensing alarm. Stainless steel sensors alert in as little as 1/32” (0.8 mm) of water. Operates on 3 AAA batteries and has low battery alert (see FM1617). Qwik-Box Pump Control and Alarm System A junction connection box designed for easy hookup of pumps and alarm systems used in various applications requiring a connection outside the building or resi- dence. Eliminates the need for junction wiring boxes inside sewage and septic tanks (see FM1420). Prewired Conduit and J-Box Assemblies Prewired Conduit assemblies simplify the electrical portion of any pump job reducing the electrical job to only minutes. Flexible, watertight conduit and junction box assemblies (see FM2080 and FM1597). Disconnect and Rail Systems Complete systems for sewage, effluent and grinder pumps can be field installed or factory installed in concrete, steel or fiberglass basins and tanks. Guide rails direct the pump to and from the base elbow (see FM0787).

Control Panels Unichecks Flood Alert Qwik-Box

Full Flow SmartPak® Plus Float Switches Check Valves Alarm Systems Rail Systems © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com 37 38 © All rights reserved. ZOELLER PUMP CO. | 502-778-2731 | 800-928-7867 | zoellerpumps.com About the Zoeller FAmily oF WAter SolutionS

Founded in 1939, Zoeller Company is one of the oldest independently-owned professional pump manufacturers in North America. Headquartered in Louisville, Kentucky USA, Zoeller has over 800 employees worldwide and close to 600,000 sq. ft. of manufacturing facilities from our seven operations in North America and Asia. Zoeller Company has established itself as an innovative leader in pumping equipment and water treatment systems by continuous research and development. The quality of our products is demonstrated by UL, CSA, CE, and NSF listings as well as continued growth throughout the United States, Canada, Mexico, and over 40 other countries around the globe. The company has also expanded to include five brands, which have become the foundation of Zoeller. The original Zoeller product line now resides in Zoeller Pump Company, which offers a broad range of submersible pumps from fractional to 7-1/2 HP for residential and commercial sump, effluent, dewatering and grinding applications.

Flint & Walling, founded in 1866 in Kendallville, Indiana USA, is the only pump company in the U. S. to manufacture its own motor for jet and centrifugal pumps. This product line specializes in deep well pumps that range from 5 GPM to 1,000 GPM, as well as centrifugal, jet, booster, and submersible pumps up to 7-1/2 HP.

Founded in 1952, Wolf Pump is a manufacturer of submersible turbine pumps located in Abernathy, Texas. Wolf currently produces 4” to 8” pumps with capacities ranging from 35 to 1000 GPM. These pumps are known for their efficiency and durability in demanding water applications including irrigation, municipal water supplies, dewatering applications, dairy production, mining, the oil and gas industries, aquaculture, and more.

Zoeller Engineered Products provides products for storm water removal, sewage pumping stations and hazardous environment applications for residential, commercial and municipal markets. Available from 1/2 BHP to 60 BHP, each pump is customized by design, manufacture and installation according to exact application needs.

39 ® FM0532 0821 Supersedes 0920

3649 Cane Run Road • Louisville, KY 40211 • 502-778-2731 • 1-800-928-7867 • zoellerpumps.com