SBI INFRA MANAGEMENT SOLUTIONS PVT. LTD. (A WhollyOwnedSubsidiary Of SBI)

(SBI GITC Circle office ) STATE BANK OF , First Floor, State Bank Global IT Center, Plot no.8, 9, 10, Sector 11, CBD BELAPUR, NAVI - 400614

PROPOSED INTERIOR CIVIL AND FURNISHING WORKS TO BE CARRIED OUT FOR STATE BANK OF INDIA , GROUND FLOOR,GLOBAL IT CENTRE, D-WING.CBD BELAPUR, - 400614

PART – B: PRICE BID

TENDER SUBMITTED BY: NAME :

ADDRESS :

GSTIN NO. :

DATE :

ARCHITECT M/s. SARAYAN TURNKEY SOLUTIONS ARCHITECTS INTERIOR CONSTRUCTION 703, D'souza Mansion, J.S. Road, - West, Mumbai- 400 068. Tel.:- 28944423 / 28956520 E-Mail - [email protected] [email protected] Mobile:- 9320790825 / 8169250611 STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 2

SNo PARTICULARS QNTY UNIT RATE AMOUNT

A DISMANTLING WORKS

1 Remove carefully the existng brick masonary with plaster of any thickness including sorting out serviceable bricks and stacking the same and carting away the debris separately upto the permissible distance within or outside City limits as applicable Or as per Statutory permissions or spreading the debris etc. complete. and as directed by the Architect / Engineer. 2 Removing the old flooring or any type of tiled flooring including bedding material and levelling the surface, cleaning the site including sorting out serviceable tiles and stacking the same separately and carting away of debris upto the permissible distance within or outside City limits as applicable Or as per Statutory permissions or and as directed by the Architect / Engineer. 3 Dismantling of Tile or stone or any form of dado, skirting with the cement backing and disposal of unserviceable material as directed by the Architect / Engineer. 4 Removing the existing cement plaster of any thickness without causing dust nuisance and and carting away the debris upto the permissible distance within or outside City limits as applicable Or as per Statutory permissions and cleaning the site etc. complete. 5 Dismantling of all false ceiling or accoustical cladding under the slabs, boarding at all the levels including all necessary scaffolding and carting away of all the waste materials outside the site within or outside City limits as applicable Or as per Statutory permissions complete in all respects. or as directed by the Architect. The ceiling surface shall be clean and even and free of all the fixed fittings, screws, nails, hooks etc. fixed to the ceiling and the holes thus formed shall be filled with cement etc. and free of all stains, marks etc. 6 Dismantling of partitions and other miscellaneous furniture items and carting away the debris to the permissible distance within or outside City limits as applicable Or as per Statutory permissions complete in all respects. 7 Dismantling of existing door frames and shutters (single or double shuttered of any type), fixed glazing and stacking of serviceable material and disposal of unserviceable material to nearest municipal dumping ground.

8 Dismantling of existing counters etc. complete with including the supports embedded in the wall, if any and stacking of serviceable material and disposal of unserviceable material to nearest municipal dumping ground.

9 Dismantling of the items as mentioned from item no. 1-8 and disconnection of services viz electrical, AC, plumbing etc. complete in all respects stacking of serviceable material and disposal of unserviceable material to nearest municipal 1 L/s dumping ground. The transportation as applicable and all the Rebate (Base necessary charges to be inlcuded and consolidated rate Price Rs. needs to be provided. 50,000.00*) * Contractor has to quote compulsorily above the base price i.e. Rs. 50,000.00 . TOTAL REBATE FOR DISMANTLING AND CARTING AWAY THE MATERIAL

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 3 B CIVIL WORKS

1 VITRIFIED FLOORING DOUBLE CHARGE / POLISHED

• Providing and laying vitrified mirror finish decorative type tiles of size 600 mm x 600 mm, thickness to match manufacturers specifications of approved make, shade and pattern having water absorption between 0.08% to 2.5% for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints with cement slurry, curing and cleaning etc. complete in all respects as directed by the Architect. Prior approval for the tile to be taken from the Bank and Architect. complete the works in all respects as per the design ,direction and upto the complete satisfaction of the Architect / Engineer. The rate shall be inclusive of providing and laying 50 mm to 75 mm thk in situ plain cement concrete M15 Grade of trap metal for foundation and and bedding compacting and curing.

(Basic cost of vitrified tile flooring is Rs.800/ sq. mt. ) 400.00 SMT

2 VITRIFIED FLOORING DOUBLE CHARGE INLAY WORK

Do as above Item No 1Providing and laying vitrified mirror finish decorative type tiles with inlay work . The rate shall include the 3-5mm thick PVC spacers between the tiles and filled with laticrete epoxy grout etc as per manufacturers specifications etc and as per Architect/Bank's engineer instructions. (Basic cost of vitrified tile flooring is Rs.800/ sq. mt. ) 50.00 SMT

TOTAL FOR CIVIL WORKS

C CARPENTRY WORKS

1 PARTITION Providing and fixing in position full height solid partition in position as indicated in the drawing excluding the door. The frame of partition to be made of aluminium hollow sections of 50 mm x 50 mm size 1.5mm thick of JINDAL, INDAL or equivalent make as internal frame structure placed horizontally & vertically in 600mm x 600mm center to center or as directed by the Architect. The alternate and corner vertical members of the partition shall be taken upto the ceiling level (payment shall be made for the partition measured upto below the false ceiling level) and the same shall be anchored to the ceiling

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 4

securely with the help of suitable cleats. The framework shall be covered with 12 mm thick BWR ply conforming IS 303 standards and of approved make on both sides finished as per folllowing specifications.The necessary openings in the partitions shall be provided for A.C. Grill, Electrical Conduits, Electrical Switches, Light Fixtures, A.C. Opening, Running display Speaker, Fire Detectors, Electric Fixtures etc. complete as per site requirements and instructions of the Architect / Engineer.

The height of the partitions upto soffit of false ceiling and laminate finish top shall be considered for payment. The alternate and corner vertical members of the partition shall be fixed with necessary brackets /supports to RCC 10 SMT members. The framework above the false ceiling shall not be considered for payment.

2 LOW HEIGHT SOLID PARTITION Providing and fixing in position Low height solid partition in position as indicated in the drawing the frame to be made out of aluminium hollow sections of 50 mm x 50 mm size 1.5mm thick of JINDAL, INDAL or equivalent make as internal frame structure placed horizontally & vertically in 600mm x 600mm center to center or as directed by the Architect / Engineer.

The framework shall be covered with 12 mm thick BWR ply conforming IS 303 standards and of approved make on both sides and finished with 1.0 mm thick laminate of approved 10 SMT shade and make on both sides.

3 12MM THK TOUGHENED GLASS INTERNAL PARTITION Providing and fixing Internal 12 mm thk toughened glass partition in position as indicated in the drawings. The glass shall be fixed securely with SS/ Alloy U channel of approved make at bottom of the floor and inside the ceiling as per manufacturer's specifications and to the Architect's satisfaction. Any damage to the newly laid flooring shall be reinstated and complete in all respects. The partition shall include the provision of the necessary cut-outs if required for communication or as directed by the Architect or Client and 120 SMT the edges of the same shall be mirror polished along all edges. (The rate is not inclusive of the glass doors.)

4 PANELLING - COLUMN / WALL PANELING - LAMINATE FINISH WITH GROOVES Providing and fixing column panelling made out of aluminum hollow section of 50mm x 25mm size 1.5mm thick of JINDAL / INDAL as internal frame structure placed horizontally & vertically in 600mm x 600mm center to center or as directed by the Architect. The framework shall be fixed with 40 SMT 12 mm thick plywood BWR IS 303 GRADE conforming to IS standards so as to form a groove of 12 mm x 12 mm x 18 mm in ht. as indicated in the detailed drawing.

The panelling and the groove formed shall be finished with 1.0 Laminate of approved shade and colour all complete as per instructions of Architect. The item also includes scaffolding for maximum height upto 4.0 m from floor level.

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 5

5 COLUMN PANELLING - ACP CLADDING FINISH Providing and fixing column panelling made out of aluminum hollow section of 50 mm x 25 mm size 1.5 mm thick of JINDAL / INDAL as internal frame structure placed horizontally & vertically in 600mm x 600mm center to center or as directed by the Architect. The framework shall be 60 SMT finished with 12 mm thick plywood BWR IS 303 GRADE conforming to IS standards and finish with 3-4 mm thk. ACP cladding of approved shade in a pattern or design as suggested and designed by the Architect.

6 COLUMN PANELLING - VENEER FINISH Providing and fixing column panelling made out of aluminum hollow section of 50 mm x 25 mm size 1.5mm thick of JINDAL / INDAL as internal frame structure placed 55 SMT horizontally & vertically in 600mm x 600mm center to center or as directed by the Architect.

The framework shall be finished with 12 mm thick plywood BWR IS 303 GRADE conforming to IS standards and finished with 4.0 mm thk. veneer of approved shade and design in a pattern or design as suggested and designed by the Architect and finished with melamine polish. Basic rate of veneer - Rs. 100/sq.ft.

7 STORAGES LOW HEIGHT STORAGES - LAMINATE FINISH Providing and fixing storage cabinet 1200 mm high made out of 19mm thick PLY BWR 303 grade plywood conforming IS Standards plywood of approved make including the fixing of shelves at 400 mm to 450 c/c and the shutters shall be in 19 mm thick PLY and back covered with 19 mm plywood. The top edge shall be GRANITE finish with full round edge polish of the approved make and shade with the provision of necessary grooves between the top edge and shutters below.

The shutters shall be fixed with S type L hinges of approved make so as to get an equal 8 mm groove between all the shutters at the opening and hinged end of every shutter as per the detailed drawing. The shutter shall be fixed with SS chain from inside so as to open the shutter less than 90 degree and to avoid the breaking of laminate at the hinged end.

The shutter shall be finished externally with approved quality 1.0 mm thk. laminate of approved shade and make and internally would be finished with 0.8 mm thk. balancing white or off-white laminate. The rate shall be inclusive of provision of SS "D"type handles 4" or 6" as approved, Godrej or Vijayan locks with 3 keys and all the necessary hardware, 40 SMT fixtures, fittings etc complete in all respects as directed by the Bank and Architect ( Basic cost of Granite is Rs. 200/- per sft for Storage Top)

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 6

DOORS 8 FLUSH DOOR FINISHED WITH LAMINATE ON BOTH SIDES Providing and fixing of Flush Doors with vision panel of size upto 900 mm x 2100 mm as per drawing complete of thickness 30 mm to 36 mm raw size confirming to IS standards together with the frame made out of CPTW section 100 x 75 and finished with Melamine polish (3 coats) 3 SMT or as directed by the Architect/engineer. The shutter shall be finished with 1.0 mm thk. laminate along both sides of approved shade and design.

The shutter shall be lipped with 12 mm thk. t w beading along the edges. The rate shall be inclusive of the hardware, fittings, fixtures etc. in heavy duty SS such as lock of 6 lever of Godrej or Doorset make with SS mortise handle of approved make and model.

The rate shall be inclusive of concealed door closers, SS heavy duty hinges, tower bolts, SS foot operated door stopper, SS buffer along the back side and any other related hardware , fittings, fixtures etc. required to complete.The item shall include the polishing of the edges and frames in Melamine polish or as approved by the Architect/bank

9 GLAZED DOOR 1800 mm x 2100 mm (MAIN ENTRANCE) - Providing and fixing of fully glazed frameless double shuttered glazed door made out of 12 mm thk. Toughened glass and the door shall be fixed with Enox or approved make floor springs with SS finish patch fittings on top, bottom and lock of Enox or approved make. The door shall 5 SMT have lock in the center of approved make and 450 mm to 600 mm long SS handle of 25 mm dia. to be fitted horizontally/ vertically as per instructions of the Architect.

The rate shall be including the making of necessary holes in the glass for Access control locks, complete with all respect with all hardware, fittings, fixtures etc. complete in all respects.

10 GLAZED DOOR 900 mm x 2100 mm- Providing and fixing of fully glazed frameless glazed door made out of 12 mm thk. Toughened glass and the door shall be fixed with Enox or approved make floor springs with SS finish patch fittings on top, bottom and lock of Enox or approved make. The door 15 SMT shall have lock in the center of approved make and 450 mm to 600 mm long SS handle of 25 mm dia. to be fitted horizontally/ vertically as per instructions of the Bank and Architect. The rate shall be including the making of necessary holes in the glass for Access control locks, complete with all respect with all hardware, fittings, fixtures etc. complete in all respects.

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 7

11 NEW ANODISED ALUMINIUM WINDOW WORK Providing and fixing New Anodised Aluminium work ( anodised transparent or dyed to required shade according to IS : 1868, minimum coating of grade AC15) in shutters for doors, windows, ventilators and partition with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS :1285,fixing with float glass panels of 5.5mm /6mm thickness fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/Neoprene felt etc.

Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherver required including cleat angle, aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per site requirement (Basic Rate of Granite = Rs 200/-per sft). 60 SMT Thickness of Granite 19mm +-2mm ( 12" or 6 " wide Double Step )

12 Roller Blinds Providing and fixing of Roller blinds of Vista/Mac or equivalent make or as approved by the Consultant or Engineer-in- charge. The Roller blinds shall be of High strength ribbed extruded Aluminium Section, 45mm high x 32mm wide X 1.3mm thick, powder coated for smooth paint finish and corrosion resistance.TILT ROD : Made of extruded Aluminium having 3 keyways . Fixed to the End Control Unit, it rotates Louvers with minimum torsional deflection,RUNNERS : Made of moulded plastic, having tongued polycon stem to hold Louvers. It facilitates friction less 180 rotation of Louvers. SPACERS : Made of moulded Derlin, it helps in proper spacing of runners, thereby ensuring proper overlapping of Louvers resulting in perfect light control.,TRANSVERSE CORD : High strength polyester fibre cord of 2.2 mm diameter. It helps to stack the Lovers.,TILTER CHAIN : 2.0mm polyester cord having 4.5mm ABS plastic beads. It helps in trouble free rotation of Louvers by 180.,CORD 60 SMT WEIGHT : It is made of ABS plastic 110mm long with a Steel Weight inside. It helps in keeping the transverse cord straight.,BOTTOM WEIGHT. It is made of power coated galvanized Steel Sheet 1.8mm thick. It adds weight

TABLES

Supply & installation of Work station with low height partition in 12mm toughned glass partition above table top of 1' 6'' height on visitor side. Table tops shall be made of 25mm thk Pre-laminated exterior grade particle boards finished with 1 mm of suede finish conforming to IS : 12823, Interior Grade with 2 mm thick edgebanding of matching shade to make it more resisitant towards heat and moisture.

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 8

A specially designed powder coated M.S. brackets shall be fixed to the partition frame to support the table tops. Table ends shall be made of 25mm thk prelam particle board of suede finish with both side laminate (BSL) and connected to frame with help of metal powder coated brackets to support table top. Frames :- Partition thickness shall be of 60mm ± 10 mm for stability and with the inside gap between two tile is approximately 50mm ± 10 mm for higher wire carrying capacity.

Frame (Horizontals) shall be made of 1mm thick CRCA sheets & the verticals are made of Aluminium Extrusions of 1.5mm thick, All the frames will be duly powder coated upto 50-60 dft , which will be inline with the Top trims & end trims, All the Caps viz end, inline & universal & raceway caps are made out of Die-cast aluminum. The partition must have three integrated raceway provided one at skirting level and another two at below & above the work surface level thus ensuring separation of power and networking cables.

The free space available within raceway ccommodates power, data and communication cables. Metal CPU Trolley & Keyboard tray to be considered. BottomTile: Bottom row of frame is of MDF prelam, from both internal and external sides, made of 6 mm thick MDF board with std color Top Tile: frosted glass on partition on back of visitor side. Other Metal Fabric tile: Constructed out of CRCA, and covered with fabric of std color. Soft pin up tile: made out of 0.8 mm thick galvanized iron sheet with 8mm thick cross linked foam and covered with fabric of std color.

The drawer unit consists of 2 box drawer and 1 file Self / drawer. The sides of Inside drawer box are of prelam particle board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key. recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors for easy mobility.

Edgebanding shall be of Rehau or Dolken of germany make The complete furniture unit is factory assembled with knock down fittings. The pedestal is fitted with additional (5th) castor to avoid toppling in case of opening all the three drawers. All the hardware & channels are from Hettich/Ebco. ( All above table top glass panel to be fixed similler to the work station finished on 4th floor of ground floor "C" wing. )

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 9

13 WORKSTATIONS - 1050 x 600 ( Specification as per above ) 86 nos.

14 WORKSTATIONS - 1370 x 600 ( Specification as per above ) 24 nos.

15 CUBICLE WORKSTATIONS - 1500 X 1500 ( Specification as per above ) 8 nos.

16 PRELAMINATED SLIDING DOOR UNITS)- All Wood Echo Storage (PRELAMINATED SLIDING DOOR UNITS) - 750 H 8 nos. x 900 W x 450

17 High Back Chair 8 nos. Seat / Back assembly - The seat is made up of 1.2 +/- 0.1 cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18and upholstered with leather and moulded Polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. The chair needs to be high back with netted back rest in black colour conforming to standards as per Godrej or equivalent make - high back chair with netted back and castor provision.

High resilience (HR) Polyurethane foam: The HR Polyurethane foam is moulded with density = 45+/-2 kg/cubic meter and hardness load 16+/- 2kgf as per IS:7888 for 25% compression.

Fixed type mechanism: The Fixed type mechanism is made with a 0.8+/-0.05 cm thk. HR steel spine welded to it and black powder coated (DFT 40-60 microns)

Understructure: the understructure is made up of MSERW Elliptical tube of size 4.5 +/-0.03 cm x 1.9 +/-0.02cm x 0.25+/- 0.025 cm welded to MSERW Tube of dia. 1.6+/-0.02 cm x 0.2 +/-0.016cm thk. The under structure is powder coated (DFT 40-60 microns) in silver metallic grey.

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 10

19 Mid Back Chair - Same specificatioons as item no. 18 but mid back chair with netted back and provided with castors 110 nos. conforming to specifications

20 Visitor Chair - Same specifications as item no. 18 but mid back chair castors black in colour fixed conforming to 16 nos. specifications

Preferred make of chairs (For item No. 17 to 20): Godrej / Durian / Wipro / Featherlite

Note: The photographs shown are indicative for feeatures may vary for different approved manufacturers.

TOTAL FOR CARPENTRY WORKS

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 11

D POP / FALSE CEILING WORKS

1 INDIA GYPSUM FALSE CEILING Providing and fixing suspended false ceiling, which includes providing and fixing GI perimeter channels of size 0.55mm thick having one flange of 20mm and another flange of 30mm and a web of 27mm along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws at 610mm centers. The suspending GI intermediate channel of size 45mm, 0.9mm thick with two 125 SMT flanges of 15mm each from the soffit at 1220mm centers with ceiling angle of width 25mmx 10mmx 0.55mm thick fixed to soffit with GI cleat and steel expansion fasteners.

Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457mm centers. 12.5mm tapered edge Gypboard (Conforming to IS- 2095-1982) is then screwed fixed to ceiling section with 25mm dry wall screw at 230mm centers. Screw fixing is done mechanically.

Finally the boards are to be jointed and finished so as to have a flush look which includes filling as finishing the tapered and square edge of the boards with joining compound, paper tape and two coats of primer suitable for Gypboard (as equivalent) extra frame work for electrical fittings, A/C diffusers, and/or any other cut-out, trap doors, wooden shadow battens (hollock wood black enamel painted- 25x40mm) at wall peripheries and ends, 12mm thick MDF board for pelmet etc. complete including opening to be made for AC grills, light fittings, trap doors etc.

(The quoted rate shall be inclusive of suspenders at all heights).

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 12

2 MODULAR CEILING Providing and fixing modular false ceiling of 600 mm x 600 mm centre to centre and 18 mm thick square mineral fibre board to be fixed on frame work of Aluminium sections for suspended false ceiling consisting of Aluminium T 2" X 1 1/2" (50 mm X 40 mm) weighing 0.39 kg/m at 60 cms centre to centre and fixed with 1/2" x 1/2" (15 x 15 mm) flanges 400 SMT weighing 0.19 kg/m suspended on 6 mmdia. mild steel rod weighing 0.22 kg/m, fixed on wall and beams including rounding of the edges with aluminium T of 2" x 1 1/2" (50 mm x 40 mm) weighing 0.39 kg/m etc.

(All aluminium sections shall be anodized/powder coated) including all labour, material, lifts etc. complete. Make - Armstrong or equivalent make with silhoutte groove

3 GYPSUM PUNNING Providing and fixing on an average 15mm to 18mm thick gypsum punning over cement plaster on walls, including the levelling and smooth finishing of the surface including the sand papering the old surface etc. The rates shall be inclusive of scaffolding etc. for any height and for plane as 440 SMT well as architectural surface in line & plumb finished smooth to receive paint complete in all respects as directed by the Architect. The rate shall be icnclusive of 6 mm sgrooves along all the four sides of window and door frames of granite / marble / wood and along the skirting level and as directed by the Architect etc. complete in all respects.

TOTAL FOR POP WORKS

E PAINTING WORKS

1 SATIN PAINT FOR WALLS / CEILING - Erecting scaffolding at all levels, preparing the surface by rubbing the surface by sand papers of different grade, removing all dirt, smoke, grease, loose plaster etc. if any from the existing surface cleaning the surface thoroughly and removing all the dirt from the surface. Providing and applying three coats of approved quality plastic paint over the required number of coats of approved cement primer in all internal walls all complete including the carrying out of the necessary lambi work with Birla white putty (2 COATS) as per

manufacturers specificcation and finished in plain, clear and smooth or rough surface as per the site condition etc. standard specifications and as directed by the Architect with SATIN PAINT of approved manufacturer of approved shade, colur and pattern and design.

Signature of Contractor with Seal STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 13 The rate shall include the required protection by covering the existing furniture by plastic sheet so as to avoid any damage and keeping the surface intact including complete cleaning after completing the painting, removing painting marks and making good the same. All complete as directed by the Architect.

a PLASTIC PAINT FOR CEILING - Same specifications as above but finished with plastic paint 100 SMT

b LUSTER PAINT FOR WALLS - Same specifications as above but finished with luster paint 200 SMT

c TEXTURE FOR WALLS- Same specifications for the above but finished with Texture paint of approved shade as directed by the Architect. 25 SMT

TOTAL FOR PAINTING WORKS

SUMMARY (INTERIOR CIVIL & FURNISHING ) A DISMANTLING WORKS

B CIVIL WORKS

C CARPENTRY WORKS

D POP WORKS

E PAINTING WORKS TOTAL FOR THE INTERIOR FURNISHING WORKS

GST will be Paid as per actual

Seal of Tenderer

Signature of Tenderer

Name of Tenderer

Contact of Tenderer

Signature of Contractor with Seal