Bash Get File Modification Date
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Dell EMC Powerstore CLI Guide
Dell EMC PowerStore CLI Guide May 2020 Rev. A01 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Contents Additional Resources.......................................................................................................................4 Chapter 1: Introduction................................................................................................................... 5 Overview.................................................................................................................................................................................5 Use PowerStore CLI in scripts.......................................................................................................................................5 Set up the PowerStore CLI client........................................................................................................................................5 Install the PowerStore CLI client.................................................................................................................................. -
LS-90 Operation Guide
Communicating Thermostat - TheLS-90 has 2 RTM-1 radio ports. These allow your thermostat to communicate with other systems. Depending on your area Power Company, programs may be available to connect your thermostat to power grid status information. This can make it easy for you to moderate your energy use at peak hours and use power when it is less expensive. The RTM-1 ports also allow you to connect yourLS-90 to your home WiFi network. This can give you access to your home’s HVAC system even when you are away. It can also give you access to web based efficient energy management sites that RTM-1 port can help you save money and protect the environment. Customer support:877-254-5625 or www.LockStateConnect.com PG 20 PG 1 LS-90 Operation Guide top cover The LS-90 programmable communicating Wire thermostat operates via a high-quality, easy- terminals Power Grid Reset to-use touch screen. To program or adjust status button your LS-90, simply touch your finger or the indicators Home stylus firmly to the screen. The screen will button SAVE NORMAL automatically light up and you will hear a ENERGY $0.05 KW H FAN 12:30pm “beep.” The screen will respond differently to 5/25 WED different types of touches, so you may want Control o TARGET bar to experiment with both your finger and with F 77o Save TEMP Power the stylus, which is included with the LS-90, Energy HUMI D button HVAC 23% Button STATUS Power Status Normal $.05/kW to see what works best for you. -
LS JK BUILDER KIT 2007-2011 Jeep Wrangler JK Installation Guide
LS JK BUILDER KIT 2007-2011 Jeep Wrangler JK Installation Guide Install Guide © Table of contents: Preface………………………………………………………………… ………………….….….…3 Part 1 Power options…………………………………………………………………….….…..…4 Part 2 The LS JK…………………………………………………………………………….….….6 Part 3 LS engines…………………………………………………………………………….….…7 Part 4 Operating systems………………………………………………………………………..10 Part 5 Gen IV LS engine features……………………………………………………………….11 Part 6 Transmissions……………………………………………………………………………..12 Part 7 Transfer cases……………………………………………………………………………..13 Part 8 MoTech basic builder kit contents……………………………………………………….14 Part 9 MoTech basic builder kit photo ID table…………………………………………………18 Part 10 MoTech Basic Kit Installation Overview and Shop Tools Required………………...20 Part 11 Prepping the vehicle………………………………………………………………..……21 Part 12 Removing the body……………………………………………………………………....21 Part 13 Prepping the chassis…………………………………………………………………..…28 Part 14 Installing the powertrain………………………………………………………………….31 Part 15 Accessory drive………………………………………………… ………………………36 Part 16 Wiring the LS JK…………………………………………………………………………..39 Appendix ……………………………………………………………………………………………52 Pentstar fan installation……………………………………………………………………52 Wiring diagrams…………………………………………………………………………….53 241J Input gear installation………………………………………………………………..56 Manual to automatic conversion……………………………………………………….….81 Torque specification GM and Jeep……………………………………………………….83 Radiator hose guide…………………………………………………………………...…...86 LS JK master part list…………………………………………………………………........87 2 Install Guide © Preface: The Wrangler -
GNU M4, Version 1.4.7 a Powerful Macro Processor Edition 1.4.7, 23 September 2006
GNU M4, version 1.4.7 A powerful macro processor Edition 1.4.7, 23 September 2006 by Ren´eSeindal This manual is for GNU M4 (version 1.4.7, 23 September 2006), a package containing an implementation of the m4 macro language. Copyright c 1989, 1990, 1991, 1992, 1993, 1994, 2004, 2005, 2006 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled “GNU Free Documentation License.” i Table of Contents 1 Introduction and preliminaries ................ 3 1.1 Introduction to m4 ............................................. 3 1.2 Historical references ............................................ 3 1.3 Invoking m4 .................................................... 4 1.4 Problems and bugs ............................................. 8 1.5 Using this manual .............................................. 8 2 Lexical and syntactic conventions ............ 11 2.1 Macro names ................................................. 11 2.2 Quoting input to m4........................................... 11 2.3 Comments in m4 input ........................................ 11 2.4 Other kinds of input tokens ................................... 12 2.5 How m4 copies input to output ................................ 12 3 How to invoke macros........................ -
GNU M4, Version 1.4.19 a Powerful Macro Processor Edition 1.4.19, 28 May 2021
GNU M4, version 1.4.19 A powerful macro processor Edition 1.4.19, 28 May 2021 by Ren´eSeindal, Fran¸coisPinard, Gary V. Vaughan, and Eric Blake ([email protected]) This manual (28 May 2021) is for GNU M4 (version 1.4.19), a package containing an implementation of the m4 macro language. Copyright c 1989{1994, 2004{2014, 2016{2017, 2020{2021 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled \GNU Free Documentation License." i Table of Contents 1 Introduction and preliminaries ::::::::::::::::: 3 1.1 Introduction to m4 :::::::::::::::::::::::::::::::::::::::::::::: 3 1.2 Historical references :::::::::::::::::::::::::::::::::::::::::::: 3 1.3 Problems and bugs ::::::::::::::::::::::::::::::::::::::::::::: 4 1.4 Using this manual :::::::::::::::::::::::::::::::::::::::::::::: 5 2 Invoking m4::::::::::::::::::::::::::::::::::::::: 7 2.1 Command line options for operation modes ::::::::::::::::::::: 7 2.2 Command line options for preprocessor features ::::::::::::::::: 8 2.3 Command line options for limits control ::::::::::::::::::::::: 10 2.4 Command line options for frozen state ::::::::::::::::::::::::: 11 2.5 Command line options for debugging :::::::::::::::::::::::::: 11 2.6 Specifying input files on the command line ::::::::::::::::::::: -
DAA Protocol
Analysis of Direct Anonymous Attestation using Murphi Ilya Pirkin, Sudip Regmi CS 259 Project Report. March 14, 2008 1. Introduction In this project, we modeled and analyzed the security properties of the Direct Anonymous Protocol [1] using Murphi. We simplified the protocol model using security primitives which we considered unbreakable and modeled our abstractions in Murphi. Running simulations in Murphi, we were able to confirm several known attacks in the protocol explained in [2] and [3]. In addition, the model uncovered an issue with cross-site verifications that we will discuss below. 2. Protocol Overview and Murphi model Diagram 1 below shows a simple outline of the DAA protocol. As shown, there are three major agents: the Issuer, Platforms (each consists of the Host and TPM), and Verifiers. The final goal of the DAA protocol is to provide a way for the verifiers to ensure the authenticity of the platforms without revealing their identity. A platform is considered authentic if it contains an authentic TPM inside and has been correctly authenticated and authorized by the Issuer. The protocol has two phases: join and sign/verify. The goal of the join protocol is to set up the platform so it can prove its authenticity to verifiers. The join protocol is initiated by the platform. During the join protocol, platforms choose and commit to a secret value f, authenticate themselves to the Issuer (using its Endorsement Key EK ). The Issuer then generates a DAA Certificate from the platforms commitment to f and Issuer’s short-term key PKI. The platform stores its DAA Certificate internally. -
An Overview of the Scala Programming Language
An Overview of the Scala Programming Language Second Edition Martin Odersky, Philippe Altherr, Vincent Cremet, Iulian Dragos Gilles Dubochet, Burak Emir, Sean McDirmid, Stéphane Micheloud, Nikolay Mihaylov, Michel Schinz, Erik Stenman, Lex Spoon, Matthias Zenger École Polytechnique Fédérale de Lausanne (EPFL) 1015 Lausanne, Switzerland Technical Report LAMP-REPORT-2006-001 Abstract guage for component software needs to be scalable in the sense that the same concepts can describe small as well as Scala fuses object-oriented and functional programming in large parts. Therefore, we concentrate on mechanisms for a statically typed programming language. It is aimed at the abstraction, composition, and decomposition rather than construction of components and component systems. This adding a large set of primitives which might be useful for paper gives an overview of the Scala language for readers components at some level of scale, but not at other lev- who are familar with programming methods and program- els. Second, we postulate that scalable support for compo- ming language design. nents can be provided by a programming language which unies and generalizes object-oriented and functional pro- gramming. For statically typed languages, of which Scala 1 Introduction is an instance, these two paradigms were up to now largely separate. True component systems have been an elusive goal of the To validate our hypotheses, Scala needs to be applied software industry. Ideally, software should be assembled in the design of components and component systems. Only from libraries of pre-written components, just as hardware is serious application by a user community can tell whether the assembled from pre-fabricated chips. -
Mounting Instructions OSRAM Sensor Touch DIM LS/PD LI Light And
Description Function and application The TOUCH DIM LS/PD LI sensor regulates the brightness at the workplace and in office areas to increase the working comfort and to save energy. TOUCH DIM LS/PD LI The sensor can be installed in luminaires (e.g. floor standing luminaires) or in false ceilings. Function The sensor measures the brightness in the area to be regulated and keeps this to an adjustable set value by introducing artificial light according to the amount of daylight available. A B C The sensor also detects the movements of people. As daylight increases the artificial light is reduced . The sensor no longer detects any motions, it switches the luminaires off. Construction The sensor is made up of the following components: • Light sensor (A) • Motion sensor (B) • Housing (C) • Connections (D) for signal line, zero line and phase D Light and motion sensor Fitting instructions Installation Safety instructions The sensor must only be installed and put into operation by a qualified electrician. The applicable safety regulations and accident prevention regulations must be observed. WARNING! Exposed, live cables or damaged housing. Danger of electric shock! • Only work on the sensor when it is de- energized. • Disconnect the sensor or luminaire from the power supply if the housing or plastic lens is damaged. CAUTION! Destruction of the sensor and other devices through incorrect mounting! • Only use electronic OSRAM ballast coils of the type QUICKTRONIC INTELLIGENT DALI (QTi DALI…DIM), HALOTRONIC INTELLIGENT DALI (HTi DALI…DIM) or OPTOTRONIC INTELLIGENT DALI (OT…DIM). • Do not operate any other other control units on the control line. -
1 PWD-I-1. Please Explain in Detail How the Average TAP Benefit
BEFORE THE PHILADELPHIA WATER, SEWER AND STORM WATER RATE BOARD In the Matter of the Philadelphia Water Department’s Proposed Change in Water, Wastewater and Stormwater Fiscal Years 2019-2021 Rates and Related Charges RESPONSE OF PUBLIC ADVOCATE TO PHILADELPHIA WATER DEPARTMENT’S INTERROGATORIES AND REQUESTS FOR PRODUCTION OF DOCUMENTS (SET I) PWD-I-1. Please explain in detail how the Average TAP Benefit amount is to be determined for each rate period, and the sources of the information that you propose should be used for determining the Average TAP Benefit. Response: The “Average TAP Benefit,” the term used in this question, is not an input into the TAP Rider expected to be proposed by the Public Advocate in this proceeding, nor is it an input in the draft TAP Rider previously provided to the Department on February 2, 2018. The February 2, 2018 draft TAP Rider as provided to the Department by the Public Advocate states the calculation of the TAP benefits, defined in the draft rider as Reconcilable TAP Costs, to be as follows: The sum of the monthly difference between the sum of the current water charges, sewer charges, stormwater charges and customer charges that would have been charged to TAP participants had they been billed at standard residential rates and the bills that are charged to TAP customers given the TAP discount (sometimes referred to as the TAP revenue shortfalls) for all TAP participants, which difference is calculated net of a Low-Income Embedded Lost Revenue Adjustment of 12.3% for the Rate Period. In the event ongoing settlement discussions concerning an appropriate TAP Rider are unsuccessful, the TAP Rider which the Public Advocate will propose in this proceeding will be filed with its Direct Testimony pursuant to the procedural schedule for this proceeding ordered by the Hearing Examiner. -
Uniq Tablet Ll 12.2” User Manual Version 1.0
Uniq Tablet ll 12.2” User Manual version 1.0 1 This manual was not subject to any language revision. This manual or any part of it may not be copied, reproduced or otherwise distributed without the publisher‘s consent. All rights reserved. Elcom, spoločnosť s ručením obmedzeným, Prešov © ELCOM, spoločnosť s ručením obmedzeným, Prešov, 2017 2 CONTENTS IMPORTANT NOTICES .............................................................................................................04 CONFORMITY DECLARATION .................................................................................................05 KEY LAYOUT AND DEFINITION ...............................................................................................06 USING THE DEVICE ..................................................................................................................07 BEFORE USING THE DEVICE ..................................................................................................10 BEFORE USING THE DEVICE ..................................................................................................10 LOGGING ON TO THE OPERATING SYSTEM ........................................................................10 SWITCHING OFF .......................................................................................................................10 RESTARTING ............................................................................................................................. 11 CONTROLLING ......................................................................................................................... -
Usability Improvements for Products That Mandate Use of Command-Line Interface: Best Practices
Usability improvements for products that mandate use of command-line interface: Best Practices Samrat Dutta M.Tech, International Institute of Information Technology, Electronics City, Bangalore Software Engineer, IBM Storage Labs, Pune [email protected] ABSTRACT This paper provides few methods to improve the usability of products which mandate the use of command-line interface. At present many products make command-line interfaces compulsory for performing some operations. In such environments, usability of the product becomes the link that binds the users with the product. This paper provides few mechanisms like consolidated hierarchical help structure for the complete product, auto-complete command-line features, intelligent command suggestions. These can be formalized as a pattern and can be used by software companies to embed into their product's command-line interfaces, to simplify its usability and provide a better experience for users so that they can adapt with the product much faster. INTRODUCTION Products that are designed around a command-line interface (CLI), often strive for usability issues. A blank prompt with a cursor blinking, waiting for input, does not provide much information about the functions and possibilities available. With no click-able option and hover over facility to view snippets, some users feel lost. All inputs being commands, to learn and gain expertise of all of them takes time. Considering that learning a single letter for each command (often the first letter of the command is used instead of the complete command to reduce stress) is not that difficult, but all this seems useless when the command itself is not known. -
Productionview™ Hd Mv
Installation and User Guide PRODUCTIONVIEW™ HD MV High Definition Camera Control Console with Integrated Multiviewer Touch Screen Control, Multi-View Control Panel Layout Options and Expanded I/O Capabilities Part Number 999-5625-000 North America Part Number 999-5625-001 International ©2013 Vaddio - All Rights Reserved ● ProductionVIEW HD MV ● Document Number 342-0241 Rev. F ProductionVIEW HD MV Inside Front Cover - Blank ProductionVIEW HD MV Manual - Document Number 342-0241 Rev F Page 2 of 36 ProductionVIEW HD MV Overview: The Vaddio™ ProductionVIEW HD MV Production Switcher with integrated camera controller and multiviewer is a powerful, cost effective and easy to operate platform for live presentation environments. With Vaddio’s revolutionary TeleTouch™ Touch Screen Control Panel (optional, sold separately), production operators can easily see and switch all live video feeds and create “video thumbnails” of preset camera shots with the touch of their finger. ProductionVIEW HD MV is a broadcast quality, 6x2; multi-format, seamless video mixer that also provides two discrete outputs for dual bus program feeds (two independent 6 x 1 switchers/mixers). ProductionVIEW HD MV Accepting any combination of input signals from Camera Control Console analog HD YPbPr video, RGBHV, SD (Y/C and CVBS) video with Input 6 providing a DVI-I input, the ProductionVIEW HD MV supports HD resolutions up to and including 1080p/60fps. The outputs have been configured for analog (YPbPr, RGBHV and SD) and digital (DVI-D) video support allowing for either a standard preview output or multiviewer preview output with support for two monitors or the multiviewer output supporting a Vaddio TeleTouch Touch Screen Control Panel.