Working With Moulding Moulding Primed & Unprimed Pine | Solid Pine The right for the job Fastening Quality Miter Box Hammer Conventional hammer or finish nailer should be Set used. A little glue and small diameter nails assure Finishing Nails tight joints . Putty the holes, sand to blend and then Putty Stick Carpenters Glue or stain. Estimating Coping To estimate out how much moulding is needed, Position the piece in the miter box as if the back of carefully measure the distances where your the miter box were the wall when cutting the miter. Trim at a 45° angle. The resulting cut exposes the moulding will be installed. Record the length of profile of the moulding, which serves as a guide line each piece and round up to the next foot. Total the for the . footage needed. Getting extra footage is always a good idea up to 10% overage. Most Following this profile with the coping saw at a right angle with the face of the moulding. This cut results species are not readily available in long lengths. in a duplication for the moulding pattern which is typically 10´ and shorter, and is heavy in will then fit tightly against the face of the adjoining 8´–12´ lengths. moulding. Mitering Staining Most miter joints are 45° angles. The moulding is Follow directions provided by individual stain either placed flat on the bottom of the miter box or manufacturers. against the back, depending on how the moulding is to be used. Each of the two mitered members Jigs are trimmed at opposite 45° angles. When fitted Many projects require picture techniques together, the two pieces will form a 90° angle. For of extreme accuracy. A is a mold in which frames tight mitered joints, nail and glue, then are made more rapidly and uniformly . The inside the nails. dimensions of the jig equal the outside dimensions of the frame. The jig consists of stock pieces Splicing nailed to any flat surface. Blocks can be used where It may be necessary to splice mouldings together necessary to straighten mouldings against the side along a wall. To do this, position the pieces in the of the jig. miter box as if the back of the miter box were the wall. Miter the joining ends at a 45° angle. This will allow one piece to overlap the other, making a . Make the joint where the two pieces ©2014 EL & EL Wood Products Corp. All rights reserved. can be nailed into a solid piece of lumber, such as a 14110502 stud, top plate or bottom plate. Gluing the joint will assure the joint stays closed. Distributed by:

ELandELWoodProducts.com Pine Moulding

CASING

Back Band Casing Oval S/L Casing Pre-Fit Casing Flat S/L Casing & Barrel Casing 4 Bead Casing #1550 Casing S/L Casing 11/16 x 1-1/8 1/2 x 1-1/2 9/16 x 1-1/2 1/2 x 1-5/8 1/2 x 1-5/8 1/2 x 1-5/8 1/2 x 1-5/8 5/8 x 1-5/8 E190 Solid Pine E104 Solid Pine 151A FJ Pine E101 Solid Pine E111 Solid Pine E112 Solid Pine E113 Solid Pine E102 Solid Pine 101A FJ Pine 102A FJ Pine

Oval S/L Casing #711 Casing 3 Step Casing #356 Casing Clamshell Casing Flat S/L Casing #356 Casing #366 Casing 5/8 x 1-5/8 5/8 x 1-5/8 5/8 x 1-5/8 9/16 x 2 5/8 x 2 11/16 x 2-1/4 11/16 x 2-1/4 11/16 x 2-1/4 E105 Solid Pine E107 Solid Pine E109 Solid Pine 153A FJ Pine E121 Solid Pine 103A FJ Pine PR152A FJ Pine (Primed) 162A FJ Pine 107A FJ Pine 11/16 x 2 5/8 x 2-1/2 152A FJ Pine 121A FJ Pine E103 Solid Pine E152 Solid Pine

Oval S/L Casing #711 Casing 3 Step Casing Universal Casing 2RE Casing 7-Bead Casing Cape Cod Casing Monterey Casing 5/8 x 2-1/2 5/8 x 2-1/2 5/8 x 2-1/2 5/8 x 2-1/2 5/8 x 2-1/2 5/8 x 2-1/2 5/8 x 2-1/2 5/8 x 2-1/2 E106 Solid Pine PR108A FJ Pine (Primed) 110A FJ Pine 115A FJ Pine E120 Solid Pine E122 Solid Pine PR150A FJ Pine (Primed) PR163A FJ Pine (Primed) 108A FJ Pine E110 Solid Pine E115 Solid Pine 150A FJ Pine 163A FJ Pine E108 Solid Pine E150 Solid Pine

Colonial Casing/ Bel-Air Casing #366 Casing Tudor Casing Palisade Casing Hermosa Casing Coronado Casing Bell Court Casing Chair Rail 5/8 x 2-1/2 11/16 x 2-1/2 11/16 x 2-1/2 11/16 x 2-1/2 1 x 2-1/2 1-1/4 x 2-1/2 1-1/4 x 2-1/2 11/16 x 2-1/2 PR128A FJ Pine (Primed) 162B FJ Pine 169A FJ Pine PR182A FJ Pine (Primed) PR159A FJ Pine (Primed) PR157A FJ Pine (Primed) 164A FJ Pine E116 Solid Pine 128A FJ Pine 159A FJ Pine 157A FJ Pine

Montecito Casing Colonial Casing #275 Casing Palos Verdes Casing #275 Casing Howe Casing 3 Flute Casing Crescent Casing 5/8 x 2-9/16 11/16 x 2-7/8 11/16 x 2-7/8 1-3/16 x 2-7/8 5/8 x 3 11/16 x 3 1/2 x 3-1/4 11/16 x 3-1/4 PR123A FJ Pine (Primed) PR119A FJ Pine (Primed) PR124A FJ Pine (Primed) 167A FJ Pine 165A FJ Pine PR177A FJ Pine (Primed) 154A FJ Pine 126A FJ Pine 119A FJ Pine E119 Solid Pine

Cambridge Casing Hermosa Casing Tudor Casing Mullion Casing 5 Flute Casing Colonial Casing/ Base Cape Cod Casing Chesapeake Casing 5/8 x 3-1/4 1-1/4 x 3-1/4 1 x 3-1/4 1/4 x 3-1/2 1/2 x 3-1/2 9/16 x 3-1/2 11/16 x 3-1/2 11/16 x 3-1/2 161A FJ Pine 160A FJ Pine 170A FJ Pine E114 Solid Pine 158A FJ Pine 117A FJ Pine 155A FJ Pine 156A FJ Pine E117 Solid Pine E155 Solid Pine

Crescent Casing Palisade Casing 2EE Craftsman Casing 4 Flute Casing 1 x 3-1/2 13/16 x 3-9/16 11/16 x 4 1/2 x 5-1/2 166A FJ Pine PR185A Solid Pine PR186A FJ Pine 172A FJ Pine BASE & SHOE

Base Shoe Base Cap Flat Base Combo Streamlined Base Streamlined Base Streamlined Base Reversible Base Streamlined Base 3 Step Base #1550 Base 3/8 x 3/4 11/16 x 1-3/8 7/16 x 1-1/2 Base & Shoe 7/16 x 1-5/8 1/2 x 1-5/8 3/8 x 2-1/4 3/8 x 2-1/4 7/16 x 2-1/2 7/16 x 2-1/2 7/16 x 2-1/2 PR300A FJ Pine (Primed) E614 Solid Pine 301A FJ Pine 7/16 x 1-9/16 E302 Solid Pine E303 Solid Pine 304A FJ Pine PR304A-2 FJ Pine 305A FJ Pine 312A FJ Pine E313 Solid Pine 300A FJ Pine E301 Solid Pine E308 Solid Pine E304 Solid Pine E305 Solid Pine 1/2 x 2-1/2 E300 Solid Pine E312 Solid Pine 1/2 x 3/4 PR300B FJ Pine (Primed) E300B Solid Pine

#711 Base Streamlined Base Combo #356 Base #711 Base #356 Base #623 Base Crescent Base Streamline Base #711 Base 3 Step Base 7/16 x 2-1/2 1/2 x 2-1/2 Base & Shoe 1/2 x 2-1/2 5/8 x 2-1/2 7/16 x 3-1/4 9/16 x 3-1/4 9/16 x 3-7/16 7/16 x 3-1/2 7/16 x 3-1/2 1/2 x 3-1/2 PR310A FJ Pine (Primed) E306 Solid Pine 1/2 x 2-1/2 319A FJ Pine 310B FJ Pine PR320A FJ Pine (Primed) 314A FJ Pine 339A FJ Pine 307A FJ Pine PR311A FJ Pine (Primed) 322A FJ Pine 310A FJ Pine E309 Solid Pine 320A FJ Pine E307 Solid Pine 311A FJ Pine E322 Solid Pine E310SS Solid Pine E311 Solid Pine 1/2 x 2-1/2 E310 Solid Pine

Colonial Base Colonial Base Palos Verdes Base Hermosa Base Cape Cod Base Monterey Base Colonial Base Crescent Base 3 Step Base #175 Base Palisade Base 9/16 x 3-1/2 9/16 x 3-1/2 1 x 3-1/2 9/16 x 3-3/4 9/16 x 4 7/16 x 4-1/4 9/16 x 4-1/4 11/16 x 4-1/4 1/2 x 4-1/2 9/16 x 4-1/4 9/16 x 4-1/2 E117 Solid Pine PR118A-3 FJ Pine (Primed) 327A FJ Pine 324A FJ Pine PR318A FJ Pine (Primed) PR316A FJ Pine (Primed) PR118A-4 FJ Pine (Primed) 326A FJ Pine 321A FJ Pine 325A FJ Pine PR382A FJ Pine (Primed) 117A FJ Pine 318A FJ Pine 316A FJ Pine 118A FJ Pine E318 Solid Pine E118 Solid Pine

Hermosa Base Montecito Base #618 Base Crescent Base “B” Cape Cod Base Colonial Base #175 Base Lancaster Base Howe Base 1EE Craftsman Base Palisade Base 9/16 x 5 9/16 x 5 9/16 x 5-1/4 9/16 x 5-1/4 9/16 x 5-1/4 9/16 x 5-1/4 9/16 x 5-1/4 5/8 x 5-1/4 9/16 x 5-1/4 9/16 x 6 9/16 x 6 PR323A FJ Pine (Primed) PR336A FJ Pine (Primed) 315A FJ Pine 317A FJ Pine 318B FJ Pine 328A FJ Pine 338A FJ Pine 365A FJ Pine PR384A FJ Pine (Primed) PR383A FJ Pine (Primed) PR385A FJ Pine (Primed) 323A FJ Pine 9/16 x 5-3/8 PR338A FJ Pine (Primed) Pine Moulding

CROWN

Crown Colonial Crown Colonial Crown Colonial Crown Cornice Bed Mold Colonial Crown 9/16 x 1-5/8 9/16 x 2-1/4 9/16 x 2-1/4 9/16 x 2-1/4 11/16 x 2-1/2 11/16 x 3-1/4 9/16 x 3-3/8 E400 Solid Pine E401 Solid Pine 401A FJ Pine E418 Solid Pine 402A FJ Pine 413A FJ Pine PR405A FJ Pine (Primed) 405A FJ Pine E405 Solid Pine

Crown Cornice Crown Georgian Crown Cornice Colonial Crown 9/16 x 3-1/2 1-1/4 x 3-9/16 9/16 x 4-1/4 11/16 x 4-1/4 1-1/8 x 4-1/2 9/16 x 4-3/8 E402 Solid Pine 411A FJ Pine E403 Solid Pine 412A FJ Pine E407 Solid Pine 406A FJ Pine PR406A FJ Pine (Primed) 9/16 x 4-1/2 E406 Solid Pine

Cornice Colonial Crown Crown Cornice Crown 11/16 x 4-5/8 9/16 x 5-1/4 9/16 x 5-1/2 1-1/16 x 5-3/4 5/8 x 6 409A FJ Pine PR414A FJ Pine (Primed) E404 Solid Pine 408A FJ Pine 410A FJ Pine 414A FJ Pine 11/16 x 6 E410 Solid Pine WAINSCOT HOOK & CLEAT S4S BOARDS STOP

Bead T&G Wainscot FJ Milled Hook Unprimed Cleat FJ Pine (Double-Primed) 1RE Stop 1RE Stop 1RE Stop 1RE Stop 9/16 x 3-3/8 9/16 x 3-1/4 5/8 x 1-1/2 PR713A 11/16 x 1-1/2 (1x2) 3/8 x 1/2 3/8 x 3/4 1/2 x 3/4 3/8 x 1 PR2000A FJ Pine (Primed) MH FJ Pine 10FJ FJ Pine PR715A 11/16 x 3-1/2 (1x4) E200 Solid Pine E201 Solid Pine E204 Solid Pine E208 Solid Pine 9/16 x 5-3/8 PR750A 11/16 x 5-1/2 (1x6) PR2002A FJ Pine (Primed) PR751A 11/16 x 7-1/4 (1x8) 3/8 x 3-1/4 PR753A 11/16 x 11-1/4 (1x12) 2000A FJ Pine STOOL FJ Pine (Unprimed) 1RE Stop 2RE Stop 1RE Stop 3/8 x 3-1/4 Rab’t Stool 715A 11/16 x 3-1/2 (1x4) 1/2 x 1 3/8x1-1/4 3/8x1-1/4 E2000 Solid Pine 7/8 x 2-1/2 750A 11/16 x 5-1/2 (1x6) E205 Solid Pine 202A FJ Pine E202 Solid Pine E981 Solid Pine 751A 11/16 x 7-1/4 (1x8) 7/8 x 3-1/2 753A 11/16 x 11-1/4 (1x12) E982 Solid Pine Solid Pine 7/8 x 5-1/2 E705 1/2 x 1/2 Flat T&G Wainscot E984 Solid Pine E706 1/2 x 3/4 1RE Stop 1RE Stop Vinyl Stop 3/8 x 3-1/4 E707 1/2 x 1-1/2 1/2 x 1-1/4 1/2 x 1-1/2 1/2 x 1-1/2 E2001 Solid Pine E708 1/2 x 2-1/2 206A FJ Pine PR209A FJ Pine(Primed) 211A FJ Pine 3/8 x 3-1/4 E709 1/2 x 3-1/2 E206 Solid Pine 209A FJ Pine (7´ Length only) 2001A FJ Pine E710 1/2 x 5-1/2 Flat Stool 3/4 x 5-3/8 E711 3/4 x 3/4 11/16 x 4-3/4 PR2003A FJ Pine (Primed) E712 11/16 x 1-1/4 980A FJ Pine E713 11/16 x 1-5/8 (1x2) E980 Solid Pine E714 11/16 x 2-1/2 (1x3) 2RE Stop 1RE Stop Stop 11/16 x 5-1/2 E715 11/16 x 3-1/2 (1x4) 3/8 x 1-5/8 1/2 x 1-5/8 1/2 x 1-3/4 979A FJ Pine E716 1 x 1 (1x1) E203 Solid Pine E207 Solid Pine 210A FJ Pine EXTERIOR MOULD E979 Solid Pine E717 1-9/16 x 1-9/16 (2x2) E210 Solid Pine 11/16 x 7-1/4 E719 1-1/2 x 1-1/2 (2x2) 4EE 985A FJ Pine E750 3/4 x 5-1/2 (1x6) E985 Solid Pine E751 3/4 x 7-1/4 (1x8) OUTSIDE CORNER GUARD E752 3/4 x 9-1/4 (1x10) Stucco Mold Flat Stucco Mold E753 3/4 x 11-1/4 (1x12) 3/4 x 1-1/4 7/8 x 1-3/16 ASTRAGAL FJ Pine (Primed) Non-Treated PR953 FJ Pine 953B Solid Pine 1X2S4S 3/4 x 1-1/2 (1x2) OS Corner OS Corner OS Corner OS Corner 953A Solid Pine 1X3S4S 3/4 x 2-1/2 (1x3) 3/4 x 3/4 1 x 1 1-1/8 x 1-1/8 1-3/8 x 1-3/8 1X4S4S 3/4 x 3-1/2 (1x4) E720 Solid Pine E721 Solid Pine E723 Solid Pine E722 Solid Pine 1X6S4S 3/4 x 5-1/2 (1x6) 1X8S4S 3/4 x 7-1/4 (1x8) 1X10S4S 3/4 x 9-1/4 (1x10) FULL, HALF & QUARTER ROUND 1X12S4S 3/4 x 11-1/4 (1x12) 180 Eastern 180 Eastern Flat Astragal T-Astragal Brick Mold Brick w/Stucco Key 11/16 x 1-5/8 for 1-3/4˝ 1-1/4 x 2 1-1/4 x 2 PR660A FJ Pine (Primed) 1-1/4 x 2-1/4 PR612A FJ Pine (Primed) PR6128 FJ Pine (Primed) 660A FJ Pine 661A FJ Pine 612A FJ Pine 6128 FJ Pine (Unprimed) E660 Solid Pine E661 Solid Pine Full Round Half Round Quarter Round E612 Solid Pine E6128 Solid Pine 1-1/4 1/4 x 1/2 1/4 x 1/4 802P Solid Yellow Pine E570 Solid Pine E500 Solid Pine 1-5/16 5/16 x 5/8 3/8 x 3/8 S1S2E BOARDS 802A FJ Pine E571 Solid Pine E501 Solid Pine FJ Pine S1S2E (Primed) Non-Treated 1-3/8 3/8 x 3/4 1/2 x 1/2 PR760A 23/32 x 1-1/2 (1x2) PR767A 1-1/8 x 3-1/2 (5/4x4) 803P Solid Yellow Pine E572 Solid Pine E502 Solid Pine LATTICE PR761A 23/32 x 2-1/2 (1x3) PR768A 1-1/8 x 5-1/2 (5/4x6) 1/2 x 1 5/8 x 5/8 Chamfer PR762A 23/32 x 3-1/2 (1x4) PR769A 1-1/8 x 7-1/4 (5/4x8) E573 Solid Pine E503 Solid Pine PR763A 23/32 x 5-1/2 (1x6) 5/8 x 1-1/4 3/4 x 3/4 1/4 x 1-1/8 1/4 x 2-1/2 1/2 x 1/2 PR764A 23/32 x 7-1/4 (1x8) PR770A 1-7/16 x 1-1/2 (2x2) E574 Solid Pine E504 Solid Pine E700 Solid Pine E703 Solid Pine E906 Solid Pine PR765A 23/32 x 9-1/4 (1x10) PR771A 1-7/16 x 3-1/2 (2x4) 3/4 x 3/4 1/4 x 1-1/4 1/4 x 3-1/2 3/4 x 3/4 PR766A 23/32 x 11-1/4 (1x12) PR772A 1-7/16 x 5-1/2 (2x6) PR504A FJ Pine(Primed) E701 Solid Pine E704 Solid Pine E907 Solid Pine PR773A 1-7/16 x 7-1/4 (2x8) 11/16 x 11/16 1/4 x 1-5/8 1 x 1 PR774A 1-7/16 x 9-1/4 (2x10) 504A FJ Pine E702 Solid Pine E908 Solid Pine PR775A 1-7/16 x 11-1/4 (2x12) 1 x 1 E505 Solid Pine Pine Moulding

APRON | PANEL MOLD | PANEL CAP

Apron Panel/Brick Decorative Beauty M-400 Raised Panel Panel Cap Wainscot Cap 3/8 x 1-1/2 Mold Panel Mold Panel Mold Cap (3/4 Rab’t) (3/8 Rab’t) (1/4 Rab’t) 902A FJ Pine 1-1/16 x 1-1/2 1-3/8 x 3-1/4 3/4 x 1-7/8 1-1/8 x 1-1/4 3/4 x 1-1/2 5/8 x 1-1/4 E603 Solid Pine E611 Solid Pine E608 Solid Pine E613 Solid Pine E620 Solid Pine E731 Solid Pine 620A FJ Pine

Resin M-400 corner 7˝ Radius (Match E608) Panel Mold Panel Mold Panel Mold Beauty M-340 Decorative T&G Wainscot Cap Panel Cap 608ARC Solid Pine 3/8 x 1-1/8 3/8 x 5/8 11/16 x 1-5/8 Panel Mold Panel Mold (1/2–3/4 Rab’t) (1/8 Rab’t) Sold as ea. E604 Solid Pine E600 Solid Pine 605A FJ Pine 9/16 x 1-3/8 1 x 2 3/4 x 2 1/2 x 1-1/2 5/8 x 3/4 PR605A FJ Pine (Primed) E606 Solid Pine E610 Solid Pine PR621A FJ Pine (Primed) E730 Solid Pine E601 Solid Pine 3/4 x 1-5/8 5/8 x 1-9/16 Resin M-340 corner 3/4 x 1 E605 Solid Pine E607 Solid Pine 7˝ Radius (Match E607) PR602A FJ Pine (Primed) 607ARC Solid Pine E602 Solid Pine Sold as ea. BEAD & SCREEN MOLD CHAIR RAIL

Glass Bead Glass Bead Insert 3/8 x 3/8 1/4 x 7/16 3/16 x 1/2 E597 Solid Pine E596 Solid Pine E590 Solid Pine

Parting Bead Scribe Mold Flat Screen Chair Rail Chair Rail Colonial Chair Rail Bead & Barrel Colonial Chair Rail Chair Rail Backer Chair Rail Backer 3/8 x 3/4 3/16 x 3/4 1/4 x 3/4 1/2 x 1-1/2 9/16 x 2-1/2 11/16 x 2-1/2 Chair Rail 11/16 x 3 9/16 x 3-1/2 9/16 x 4-3/8 E901 Solid Pine E593 Solid Pine E591 Solid Pine E650 Solid Pine E651 Solid Pine E652 Solid Pine 11/16 x 3 653A FJ Pine PR670A Solid Pine PR671A FJ Pine (Primed) PR651A FJ Pine (Primed) 649A FJ Pine 11/16 x 3-1/4 651A FJ Pine PR655A FJ Pine (Primed) NOSE & COVE Beaded Screen Flat Hoffco Cloverleaf Mold 1/4 x 3/4 3/8 x 1 3/8 x 3/4 E592 Solid Pine E903 Solid Pine E594 Solid Pine

Cove 3/8 x 3/8 3/4 x 3/4 E520 Solid Pine E523 Solid Pine Linoleum Cove Sprung Cove Bead & Barrel 1/2 x 1/2 7/16 x 1-1/4 5/8 x 1-5/8 Chair Rail Drip Mold 1139 Picture Mold Band Mold 11/16 x 11/16 1x 1-5/8 E521 Solid Pine 523A FJ Pine E527 Solid Pine E525 Solid Pine 3/4 x 1-1/4 11/16 x 1-5/8 11/16 x 9/16 5/8 x 2-1/4 E909 FJ Pine E904 Solid Pine E905 Solid Pine E900 Solid Pine 5/8 x 5/8 1 x 1 E522 Solid Pine E524 Solid Pine E526 Solid Pine 30 Year Warranty – A 30-year limited warranty is provided on all Green Building Credited – Bodyguard qualifies for credit points Bodyguard products against termite attack, rot or fungal decay. under the following schemes:

FSC Certified – By buying products with an FSC label you are helping to promote responsible forest management worldwide.

SCS-COC-000538 TRIMBOARD PRIMED FJ PINE SIDING For Interior and Exterior Use Available in 16´ & 20´ lengths Approximately 1/2˝ Overlap Fire Rated Available in 16´ & 20´ lengths Reversible Rough-Sawn on one Side, Smooth on the other with Eased Edges.

1X2S1S 1˝ x 2˝ Rab’t Smooth Face Lap Siding Cove Siding Channel Siding V-Rustic Siding 1X3S1S 1˝ x 3˝ R/S Back Siding 430 1˝x 6˝ 771* 1˝x 8˝ 774 1˝x 8˝ 793 1˝x 6˝ 1X4S1S 1˝ x 4˝ 371 3/4˝x 6˝ 432 1˝x 8˝ 772 1˝x 10˝ 773 1˝x 10˝ 794 1˝x 8˝ 433 1˝x 10˝ *Available in 16´ Only 795 1˝x 10˝ 1X6S1S 1˝ x 6˝ 372 3/4˝x 8˝ 1X8S1S 1˝ x 8˝ 1X10S1S 1˝ x 10˝ MOULDING 1X12S1S 1˝ x 12˝

5/4X4S1S* 5/4˝ x 4˝ 5/4X6S1S* 5/4˝ x 6˝ Base Cap Corner Guard Quarter Round Bead & Nose Coving Cove Pediment Crown Shingle Mould 5/4X8S1S* 5/4˝ x 8˝ 224 9/16˝ x 3/4˝ 604 1-7/16˝ x 1-7/16˝ 614 11/16˝ x 11/16˝ 024 1-1/4˝ x 1-3/4˝ 606 11/16˝ x 11/16˝ 607 1-1/4˝ x 1-1/2˝ 616 11/16˝ x 1-5/8˝ *Available in 16´ Only

2X2S1S 2˝ x 2˝ Howe Casing Carolina Casing Architrave Brick Mould Brick Mould Brick Mould w/Key Step Stucco 2X4S1S 2˝ x 4˝ 387 1-1/16˝ x 3-1/4˝ 388 11/16˝ x 3-1/4˝ 1400 1-3/16˝ x 4-1/4˝ 619 1-1/4˝ x 1-1/2˝ 381 1-1/4˝ x 2˝ 381K 1-1/4˝ x 2˝ 627 15/16˝ x 1-15/16˝ 2X6S1S 2˝ x 6˝ 2X8S1S 2˝ x 8˝ 2X10S1S 2˝ x 10˝ 2X12S1S 2˝ x 12˝

Reversible Sill Detailed Sill Stucco Mould Stucco Mould Water Table Water Table Beaded T&G 640 2˝ x 8˝ 642 2˝ x 8˝ 618 13/16˝ x 1-1/2˝ 629 1˝ x 2-5/8˝ 630 1-7/16˝ x 2-1/16˝ 634 1-7/16˝ x 3-1/4˝ Use,For Interior and Exterior Non-Reversible | Fire Rated OnlyAvailable in 16´ Lengths 3-1/8˝ 2-15/16˝ California Fire Approval – Bodyguard has Under Eaves: Tested in accordance with had profiles successfully tested by Western Fire California State Fire Marshall Regulation 3˝ Center Inc., to California State Fire Marshall 12.7A-3. This approval is for beaded T&G 2-3/4˝ 2-9/16˝ Regulations. product (#801BG & #802BG) and must be 2-1/16˝ mounted over a minimum of ½˝ exterior grade Sidings: Tested in accordance with California gypsum board. State Fire Marshall Regulation 12.7A-1. This 801BG 5/8˝ x 4˝ x 16´ approval is for horizontal applications only and 802BG 1˝ x 6˝ x 16´ Bed & Cove Crown Gutter Mould requires installation over OSB with a minimum 639 3/4˝ x 4-5/16˝ 286 5/8˝ x 3-5/8˝ 638 1-3/8˝ x 3-5/16˝ thickness of 7/16˝. Matching Flexible Moulding is available for Arched and Oval Windows & Curved Walls and Ceilings. all the advantages of radiused wood at a fraction of the cost

superior lead-time tear resistant & stains beautifully match any profile minimal shrinkage custom profiles available incredible detail limited 5 year warranty manufactured on our premises

Benefits of using ValuFlex Manufacturing of ValuFlex • More flexibility which creates less Flexible moulding is sold in straight and pre- stress when curved or bent. formed pieces. Straight pieces are used for • Less stress means less chance of standard base, chair rail and jamb applications. cracking or splitting in the future. Casing, crown and built-up applications require • Matches wood profiles better with less shrinkage. pre-formed pieces. Pre-formed pieces are • Better definition of detail. achieved by providing precise measurements, radius or a template. Pre-formed pieces only • Paints or stains beautifully. have a variance of approx. 1˝ to 2˝, hence the • ValuFlex comes with a limited 5 year importance of precise information. Curved crown warranty against cracking or splitting. applications, by far the most diverse, require a few simple rules of thumb (see easy ordering) to easily accomplish a perfect fit without stressing the General Information material. A built-up is several pieces of mouldings • Just about all of EL & EL profiles can put together, making a more dramatic application. be reproduced in flexible moulding. • ValuFlex has been formulated for a strong tear strength and is recommended on Easy Ordering all flexible moulding applications. The smallest radius a part can be made is the • The maximum length of flexible product width of the profile times 3. (ex. a 4½˝ wide is 12´ with a minimum length is 5´. crown’s smallest radius is 13½˝ - (4½˝ width x 3) • All resin is sold by the whole foot only, however, profiles such as 304, 310, 311, 314, 329 and 330 are available in 50´ rolls. • Custom profiles are available and made to order.

No warranty on External Use of ValuFlex. ValuFlex Flexible Moulding is custom manufactured on our premises. Straight flexible base is available for immediate delivery. Radius flex is available within 2-5 working days.