DOCSLIB.ORG

IBM System I and System P System Planning and Deployment: Simplifying Logical Partitioning

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
IBM System I and System P System Planning and Deployment: Simplifying Logical Partitioning Front cover IBM System i and System p System Planning and Deployment: Simplifying Logical Partitioning Using the enhanced System Planning Tool Deploying with the HMC V7 interface Planning and deploying a Virtual I/O Server Dale Barrick Gene Meyer Marc Rauzier Chris Shomenta Jim Cook ibm.com/redbooks International Technical Support Organization IBM System i and System p System Planning and Deployment: Simplifying Logical Partitioning August 2007 SG24-7487-00 Note: Before using this information and the product it supports, read the information in “Notices” on page v. First Edition (August 2007) This edition applies to i5/OS V5R4, AIX 5L 5.3, System Planning Tool Version 2, Virtual I/O Server 1.4.0.0, and the June 2007 release of IBM Systems Workload Estimator. © Copyright International Business Machines Corporation 2007. All rights reserved. Note to U.S. Government Users Restricted Rights -- Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Notices . .v Trademarks . vi Preface . vii The team that wrote this book . vii Become a published author . ix Comments welcome. ix Chapter 1. System planning and deploying logical partitions overview . 1 1.1 System planning and deployment for logical partitions overview . 2 1.2 The LPAR planning process . 6 1.3 Gathering requirements . 6 1.4 Planning partitions and allocating hardware . 6 1.5 Ordering the system . 7 1.6 System plans on the HMC . 8 1.7 Virtual I/O Servers. 9 1.8 Virtual LAN and virtual SCSI definition enhancements . 10 Chapter 2. System Planning Tool (SPT) V2. 11 2.1 Overview of the System Planning Tool V2 . 12 2.2 Downloading SPT . 12 2.3 What is new in SPT V2 . 12 2.3.1 Version 2 new items . 13 2.3.2 Version 1 new items . 14 2.4 System Planning Tool basics . 14 2.4.1 The reconnect option . 16 2.5 Creating a new system plan . 16 2.5.1 Selecting the system platform and type/model . 18 2.5.2 Working with system attributes . 20 2.5.3 Defining system partitions. 22 2.5.4 Configuring memory . 28 2.6 Work with planned systems . 30 2.6.1 Placing hardware with the System Planning Tool. 30 2.6.2 Adding an expansion unit to the design . 32 2.6.3 Copying expansion units. 34 2.6.4 Hardware tab . 35 2.6.5 Networking tab . 44 2.6.6 Storage tab . 45 2.6.7 Defining load source . 49 2.6.8 Consoles tab . 50 2.7 System Plan Viewer . 52 2.7.1 Printing the System Plan Viewer. 60 2.8 System plan completion . 61 2.8.1 Save sysplan. 61 2.8.2 Export sysplan . 61 2.8.3 Sysplan for deployment . 63 © Copyright IBM Corp. 2007. All rights reserved. iii Chapter 3. System plans and the hardware management console . 65 3.1 System plans. 66 3.2 Using the HMC graphical user interface . 67 3.2.1 Importing a system plan to the HMC. 69 3.2.2 Exporting a system plan from the HMC . 70 3.2.3 Creating a system plan on the HMC . 72 3.2.4 Viewing a system plan on the HMC . 77 3.2.5 Removing system plan on the HMC . 80 3.3 System plans deployment . 81 3.3.1 Deployment validation process . 81 3.3.2 Deploy a system plan using the graphical wizard . 82 3.3.3 System plans management using restricted shell (CLI) . 98 Chapter 4. Virtual I/O Server . 103 4.1 Advance Power Virtualization capabilities summary. 104 4.2 Virtual I/O Server requirements. 105 4.3 Define Virtual I/O Server in System Planning Tool Version 2 . 106 4.3.1 Major steps to define a Virtual I/O Server . 107 4.3.2 Set up partitions . 109 4.3.3 Set up processors . 110 4.3.4 Set up memory . 111 4.3.5 Set up hardware . 111 4.3.6 Networking . 112 4.3.7 Storage . 120 4.4 Deployment of Virtual I/O Server on HMC . 129 4.4.1 Starting deployment of system plan containing a Virtual I/O Server partition . 134 4.5 Deployment on Integrated Virtualization Manager (IVM) . 146 Chapter 5. System Planning Tool Version 2 and Workload Estimator . 149 5.1 Sample use of SPT V2 and WLE from performance data. 150 5.1.1 Example of SPT V2 and WLE for new workload. 164 Appendix A. Managing System Planning Tool Version 2 installation . 189 Downloading the SPT installation files . ..
Load more

Recommended publications
  • Implementing Powerpc Linux on System I Platform
    Front cover Implementing POWER Linux on IBM System i Platform Planning and configuring Linux servers on IBM System i platform Linux distribution on IBM System i Platform installation guide Tips to run Linux servers on IBM System i platform Yessong Johng Erwin Earley Rico Franke Vlatko Kosturjak ibm.com/redbooks International Technical Support Organization Implementing POWER Linux on IBM System i Platform February 2007 SG24-6388-01 Note: Before using this information and the product it supports, read the information in “Notices” on page vii. Second Edition (February 2007) This edition applies to i5/OS V5R4, SLES10 and RHEL4. © Copyright International Business Machines Corporation 2005, 2007. All rights reserved. Note to U.S. Government Users Restricted Rights -- Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Notices . vii Trademarks . viii Preface . ix The team that wrote this redbook. ix Become a published author . xi Comments welcome. xi Chapter 1. Introduction to Linux on System i platform . 1 1.1 Concepts and terminology . 2 1.1.1 System i platform . 2 1.1.2 Hardware management console . 4 1.1.3 Virtual Partition Manager (VPM) . 10 1.2 Brief introduction to Linux and Linux on System i platform . 12 1.2.1 Linux on System i platform . 12 1.3 Differences between existing Power5-based System i and previous System i models 13 1.3.1 Linux enhancements on Power5 / Power5+ . 14 1.4 Where to go for more information . 15 Chapter 2. Configuration planning . 17 2.1 Concepts and terminology . 18 2.1.1 Processor concepts .
    [Show full text]
  • Power Architecture® ISA 2.06 Stride N Prefetch Engines to Boost Application's Performance
    Power Architecture® ISA 2.06 Stride N prefetch Engines to boost Application's performance History of IBM POWER architecture: POWER stands for Performance Optimization with Enhanced RISC. Power architecture is synonymous with performance. Introduced by IBM in 1991, POWER1 was a superscalar design that implemented register renaming andout-of-order execution. In Power2, additional FP unit and caches were added to boost performance. In 1996 IBM released successor of the POWER2 called P2SC (POWER2 Super chip), which is a single chip implementation of POWER2. P2SC is used to power the 30-node IBM Deep Blue supercomputer that beat world Chess Champion Garry Kasparov at chess in 1997. Power3, first 64 bit SMP, featured a data prefetch engine, non-blocking interleaved data cache, dual floating point execution units, and many other goodies. Power3 also unified the PowerPC and POWER Instruction set and was used in IBM's RS/6000 servers. The POWER3-II reimplemented POWER3 using copper interconnects, delivering double the performance at about the same price. Power4 was the first Gigahertz dual core processor launched in 2001 which was awarded the MicroProcessor Technology Award in recognition of its innovations and technology exploitation. Power5 came in with symmetric multi threading (SMT) feature to further increase application's performance. In 2004, IBM with 15 other companies founded Power.org. Power.org released the Power ISA v2.03 in September 2006, Power ISA v.2.04 in June 2007 and Power ISA v.2.05 with many advanced features such as VMX, virtualization, variable length encoding, hyper visor functionality, logical partitioning, virtual page handling, Decimal Floating point and so on which further boosted the architecture leadership in the market place and POWER5+, Cell, POWER6, PA6T, Titan are various compliant cores.
    [Show full text]
  • Managing the Control Panel Functions
    System i and System p Managing the control panel functions System i and System p Managing the control panel functions Note Before using this information and the product it supports, read the information in “Notices” on page 51 and the IBM Systems Safety Information manual, G229-9054. Seventh Edition (September 2007) © Copyright International Business Machines Corporation 2004, 2007. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Safety and environmental notices ........................v About this topic ................................ix Managing the control panel functions .......................1 What’s new for Capacity on Demand ...........................1 PDF file for Managing the control panel functions .......................1 Control panel concepts ................................1 Physical control panel ...............................2 Remote control panel ...............................5 Planning for the remote control panel .........................6 Virtual control panel................................7 Differences between the virtual control panel and remote control panel...............9 Control panel function codes .............................9 Control panel function codes on the HMC ........................10 Control panel function codes on the 7037-A50 and 7047-185 models ...............12 Control panel function code comparison for the RCP, VCP, and HMC ...............13 Values for IPL types, system operating modes, and speeds ..................15
    [Show full text]
  • Systems Management Logical Partitions Version 6 Release 1
    IBM System i Systems management Logical partitions Version 6 Release 1 IBM System i Systems management Logical partitions Version 6 Release 1 Note Before using this information and the product it supports, read the information in “Notices,” on page 135. This edition applies to version 6, release 1, modification 0 of and IBM i5/OS (product number 5761–SS1) to all subsequent releases and modifications until otherwise indicated in new editions. This version does not run on all reduced instruction set computer (RISC) models nor does it run on CISC models. © Copyright IBM Corporation 1999, 2008. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Logical partitions........... 1 Ordering a new server or upgrading an PDF file for Logical partitions ........ 1 existing server with logical partitions .... 45 Partitioning with a System i ......... 1 Providing hardware placement information Logical partition concepts ......... 1 to service providers......... 45 How logical partitioning works ...... 2 Designing your logical partitions ..... 46 How logical partitioning can work for you .. 3 Deciding what runs in the primary and Hardware for logical partitions ...... 4 secondary partition ......... 46 Bus .............. 5 Capacity planning for logical partitions .. 47 Bus-level and IOP-level I/O partitions ... 7 Using the System Planning Tool .... 47 Dynamically switching IOPs between Examples: Logical partitioning ...... 47 partitions ............ 7 Creating logical partitions ........ 48 IOP .............. 9 Managing logical partitions ........ 49 SPD and PCI ........... 11 Managing logical partitions by using System i Processor ............ 11 Navigator, DST, and SST ........ 50 Memory ............ 14 Starting System i Navigator ...... 53 Disk units ............ 15 Starting SST and DST for logical partitions 53 Removable media device and alternate Logical partition authority .....
    [Show full text]
  • System I and System P: Changing Consoles, Interfaces, and Terminals Safety and Environmental Notices
    System i and System p Changing consoles, interfaces, and terminals System i and System p Changing consoles, interfaces, and terminals Note Before using this information and the product it supports, read the information in “Notices” on page 33 and the IBM Systems Safety Information manual, G229-9054. Seventh Edition (September 2007) © Copyright International Business Machines Corporation 2005, 2007. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Safety and environmental notices ........................v About this publication .............................ix Changing consoles, interfaces, and terminals ...................1 PDF file for Changing consoles, interfaces, and terminals ....................1 Concepts for changing your current configuration of consoles, interfaces, or terminals ...........1 Choosing the procedure to follow to change a console, interface, or terminal ..............2 Changing the console from devices that use the ASMI and SMS to the HMC .............2 Changing the console without an HMC .........................3 Changing the console without an HMC and when the correct hardware is installed .........4 Changing the console without an HMC and when hardware changes are needed ..........5 Changing the console hardware with the power on ...................6 Changing the console hardware with the power off, and using another workstation ........7 Changing the console hardware with the power off, and no other workstation is available
    [Show full text]
  • Systems Management Management Central 7.1
    IBM IBM i Systems management Management Central 7.1 IBM IBM i Systems management Management Central 7.1 Note Before using this information and the product it supports, read the information in “Notices,” on page 49. This edition applies to IBM i 7.1 (product number 5770-SS1) and to all subsequent releases and modifications until otherwise indicated in new editions. This version does not run on all reduced instruction set computer (RISC) models nor does it run on CISC models. © Copyright IBM Corporation 2002, 2010. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Management Central ......... 1 Working with systems with partitions .... 36 What's new for IBM i 7.1 .......... 1 Running commands with Management Central 36 PDF files for Management Central ....... 1 Packaging and sending objects with Management Getting started with Management Central .... 2 Central ............... 37 Before you begin ............ 2 Packaging and distribution considerations ... 38 Installing Management Central ....... 5 Managing users and groups with Management Setting up the central system ........ 7 Central ............... 40 Management Central plug-ins ....... 14 Sharing with other users in Management Central 42 Troubleshooting Management Central Synchronizing date and time values ..... 43 connections ............. 14 Synchronizing functions ......... 44 Working with Management Central monitors ... 17 Scheduling tasks or jobs with Management Management collection objects ....... 18 Central scheduler ........... 44 Job monitors and Collection Services ..... 19 Related information for Management Central ... 46 Special considerations .......... 21 Creating a new monitor ......... 22 Appendix. Notices .......... 49 Viewing monitor results ......... 33 Programming interface information ...... 51 Resetting triggered threshold for a monitor ... 33 Trademarks .............
    [Show full text]
  • System I and System P: Backplanes and Cards Safety and Environmental Notices
    System i and System p Backplanes and cards System i and System p Backplanes and cards Note Before using this information and the product it supports, read the information in “Notices” on page 79 and the IBM Systems Safety Information manual, G229-9054. Twelfth Edition (September 2007) © Copyright International Business Machines Corporation 2004, 2007. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Safety and environmental notices ........................v About this topic ................................ix Backplanes and cards .............................1 PDF file for backplanes and cards ............................1 Install the model 285, 52x,55x, or 720 RAID enablement card ...................1 Prepare the system ................................2 Install the RAID enablement card ...........................2 Remove the model 285, 52x,55x, or 720 RAID enablement card ..................5 Prepare the system ................................5 Remove the RAID enablement card...........................6 Replace the model 285, 52x,55x, or 720 RAID enablement card ..................8 Removing and replacing the system backplane in a model 9113-550, 9133-55A, 9406-550, and OpenPower 720 . 10 Remove the model 9116-561 or 570 system backplane .....................13 Prepare the system ................................14 Remove the system backplane ............................15 Replace the model 9116-561 or 570 system backplane .....................17 Replace
    [Show full text]
  • IBM DB2 11 for Z/OS Technical Overview
    IBM® Information Management Software Front cover IBM DB2 11 for z/OS Technical Overview Understand the synergy with System z platform Enhance applications and avoid incompatibilities Run business analytics and scoring adapter Paolo Bruni Felipe Bortoletto Ravikumar Kalyanasundaram Sabine Kaschta Glenn McGeoch Cristian Molaro ibm.com/redbooks International Technical Support Organization IBM DB2 11 for z/OS Technical Overview December 2013 SG24-8180-00 Note: Before using this information and the product it supports, read the information in “Notices” on page xxi. First Edition (December 2013) This edition applies to Version 11, Release 1 of DB2 for z/OS (program number 5615-DB2) and Version 11, Release 1 of DB2 Utilities Suite for z/OS (program number 5655-W87). Note: This book is based on a pre-GA version of a product and may not apply when the product becomes generally available. We recommend that you consult the product documentation or follow-on versions of this book for more current information. © Copyright International Business Machines Corporation 2013. All rights reserved. Note to U.S. Government Users Restricted Rights -- Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Figures . xi Tables . xiii Examples . .xv Notices . xxi Trademarks . xxii Summary of changes. xxiii December 2013, First Edition. xxiii May 2014, First Update. xxiii Preface . .xxv Authors. xxv Now you can become a published author, too! . xxvii Comments welcome. .xxviii Stay connected to IBM Redbooks publications . .xxviii Chapter 1. DB2 11 for z/OS at a glance . 1 1.1 Subsystem . 2 1.2 Application functions . 2 1.3 Operations and performance .
    [Show full text]
  • IBM System P5 520 and 520Q Technical Overview and Introduction September 2006
    Front cover IBM System p5 520 and 520Q Technical Overview and Introduction Finer system granulation using Micro-Partitioning technology to help lower TCO Support for versions of AIX 5L and Linux operating systems From Web servers to integrated cluster solutions Giuliano Anselmi Charlie Cler Carlo Costantini Bernard Filhol SahngShin Kim Gregor Linzmeier Ondrej Plachy ibm.com/redbooks Redpaper International Technical Support Organization IBM System p5 520 and 520Q Technical Overview and Introduction September 2006 Note: Before using this information and the product it supports, read the information in “Notices” on page vii. Second Edition (September 2006) This edition applies to IBM System p5 520 (product number 9131-52A), Linux, and IBM AIX 5L Version 5.3, product number 5765-G03. © Copyright International Business Machines Corporation 2006. All rights reserved. Note to U.S. Government Users Restricted Rights -- Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Notices . vii Trademarks . viii Preface . ix The team that wrote this Redpaper . ix Become a published author . .x Comments welcome. .x Chapter 1. General description . 1 1.1 System specifications . 3 1.2 Physical package . 3 1.2.1 Deskside model . 3 1.2.2 Rack-mount model . 5 1.3 Minimum and optional features . 6 1.3.1 Processor features . 6 1.3.2 Memory features . 7 1.3.3 Disk and media features . 7 1.3.4 USB diskette drive . 8 1.3.5 I/O drawers . 8 1.3.6 Hardware Management Console models . 10 1.4 Express Product Offerings . 11 1.4.1 Express Product Offerings requirements .
    [Show full text]
  • System I and System P: Partitioning for I5/OS with an HMC About This Topic
    System i and System p Partitioning for i5/OS with an HMC System i and System p Partitioning for i5/OS with an HMC Note Before using this information and the product it supports, read the information in “Notices” on page 311 and the IBM Systems Safety Information manual, G229-9054. Eleventh Edition (September 2007) This edition applies to version 5, release 4, modification 0 of IBM i5/OS (product number 5722-SS1) and to all subsequent releases and modifications until otherwise indicated in new editions. This version does not run on all reduced instruction set computer (RISC) models nor does it run on CISC models. © Copyright International Business Machines Corporation 2004, 2007. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents About this topic ................................v Partitioning for i5/OS with an HMC ........................1 PDF file for Partitioning for i5/OS with an HMC .......................1 Partitioning with version 6 or earlier of the HMC ......................194 Configuring i5/OS logical partitions using version 6 or earlier of the HMC.............211 Partitioning a new or nonpartitioned server ......................211 Partitioning a new or nonpartitioned IBM System i5 or eServer i5 managed system using version 6 or earlier of the HMC .............................211 Partitioning a new or nonpartitioned IBM System p5, eServer p5, or IntelliStation POWER 285 managed system using version 6 or earlier of the HMC ....................217
    [Show full text]
  • IBM POWER Virtualization Best Practice Guide
    IBM Power Systems Performance IBM POWER Virtualization Best Practices Guide Version 4.0 March 2020 Copyright © 2020 by International Business Machines Corporation. IBM Power Virtualization Best Practices Guide CONTENTS 1 INTRODUCTION .................................................................................................................... 7 2 VIRTUAL PROCESSORS .......................................................................................................... 7 2.1 Sizing/configuring virtual processors ......................................................................................................... 9 2.2 Entitlement vs. Virtual processors ........................................................................................................... 10 2.3 Matching entitlement of an LPAR close to its average utilization for better performance ....................... 10 2.4 When to add additional virtual processors .............................................................................................. 11 2.5 How to estimate the number of virtual processors per uncapped shared LPAR ...................................... 11 3 AIX VIRTUAL PROCESSOR MANAGEMENT - PROCESSOR FOLDING ....................................... 11 3.1 VPM folding example .............................................................................................................................. 12 3.2 Tuning Virtual Processor Management Folding ....................................................................................... 13 3.3
    [Show full text]
  • IBM System I Application Modernization: Building a New Interface to Legacy Applications September 2006
    Front cover IBM System i Application Modernization Building a New Interface to Legacy Applications Comparison of the different ways to access the IBM System i platform Discussion of JSFs, HATS, Web services, portlets, IBM WebFacing Tool, and rich client Examples of building different client interfaces Guenther Hartung Rolf Andre Klaedtke Elena Lowery Estela McCarty Els Motmans Aleksandr Nartovich ibm.com/redbooks International Technical Support Organization IBM System i Application Modernization: Building a New Interface to Legacy Applications September 2006 SG24-6671-00 Note: Before using this information and the product it supports, read the information in “Notices” on page vii. First Edition (September 2006) This edition applies to IBM OS/400 V5R3 and IBM i5/OS V5R4. © Copyright International Business Machines Corporation 2006. All rights reserved. Note to U.S. Government Users Restricted Rights -- Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Notices . vii Trademarks . viii Preface . ix The team that wrote this redbook. ix Become a published author . xi Comments welcome. xi Part 1. Looking at the alternatives . 1 Chapter 1. Why you should consider new application interfaces . 3 1.1 Reasons for a change . 4 1.2 Up-front considerations and prerequisites . 5 1.3 IBM System i Developer Roadmap . 5 1.4 How to read this book . 6 Chapter 2. Modernizing System i legacy applications: Common business scenarios 7 2.1 Considerations for the scenarios and possible solutions . 8 2.2 Overview of the scenarios. 8 2.2.1 Scenario 1: Add a Web front end to a monolithic iSeries application .
    [Show full text]