Easy Rider® Rubber Speed Bump Product Information Brochure Pictured: Speed Bump

Total Page:16

File Type:pdf, Size:1020Kb

Easy Rider® Rubber Speed Bump Product Information Brochure Pictured: Speed Bump EASY RIDER® RUBBER SPEED BUMP PRODUCT INFORMATION BROCHURE PICTURED: SPEED BUMP Checkers™ is a full-service manufacturer of parking lot safety solutions. We design and manufacture traffic control products that help cars navigate and park safely. Our main goal has been to create solutions that protect motorists and pedestrians from the perils of today’s parking lots. As such, Checkers™ products have been designed and developed with speed reduction, driver and pedestrian safety in mind. All our solutions are manufactured from 100% recycled rubber and plastic. Our speed bumps or parking blocks, for example, are longer lasting, highly visible, and more car-friendly than asphalt or concrete alternatives. Not only are Checkers™ traffic safety solutions environmentally friendly, they can also be installed for either temporary or permanent use. • Rubber speed bumps greatly outlast concrete or • Pliable rubber protects vehicles as well as curbs asphalt competitors • Highly-reflective colored tape ensures the speed • Rubber speed bumps don’t degrade like concrete bump will be visible speed bumps, keeping parking lots • Easy-to-install, either on asphalt or concrete surfaces aesthetically pleasing • Can be used for temporary or • Channeled bottom for cabling and piping permanent applications • High-quality rubber is resistant to weather, salts, • Great for commercial and residential applications and chemicals • End caps available and sold separately • Recycled rubber construction is environmentally friendly 800-438-9336 • CHECKERS-SAFETY.COM PRODUCT INFORMATION Easy Rider® Speed Bump reduces vehicle speeds to 2-5 mph (approximate), making parking lots or light traffic streets safer for pedestrians and motorists. Constructed from 100% recycled tires, Easy Rider® speed bumps are preformed to ensure a smooth, safe ride. The Easy Rider’s flexible design conforms to the contour of virtually any road surface. End caps can also be purchased to protect the speed bump ends as well as vehicles. In-molded reflective tape and cat’s eye reflectors enhance the speed bumps visibility at night warning drivers and pedestrians well in advance. Material: Premium recycled rubber • Long lasting and cost efficient • Reduces speed to 2-5 mph • Highly visible at night • Simple installation • Product can be installed in sections to create varying lengths • Will not warp, crack, chip or rot • Can be installed on any road surface • Resistant to ultraviolet light, moisture, oil, and extreme temperatures • Temporary or permanent installation • Channeled bottom for cabling and piping • Lowers insurance premiums for lot owners • Maintenance free • Warranty: 3 years on the product; 1 year on the tape (under normal use) • Traffic Control • Street Maintenance WARNING: This product can expose you to chemicals including Arsenic, Cobalt, • Parking Lots • Event Venues Cadmium, Lead, Chromium, Nickel Compounds, which is known to the State of Cali- fornia to cause cancer and birth defects or other reproductive harm. • Facility Protection • Residential Areas For more information go to www.P65Warnings.ca.gov. APPLICATIONS SPECIFICATIONS Model Description Length Height Width Weight Bolts Needed 2 6111 6 ft. Speed Bump 72 in. (182.9 cm) 2.25 in. (5.7 cm) 12 in. (30.4 cm) 51 lbs. (23.1 kg) 4 2 4111 4 ft. Speed Bump 48 in. (121.9 cm) 2.25 in. (5.7 cm) 12 in. (30.4 cm) 32 lbs. (14.5 kg) 3 26999 (end cap) End Cap 9 in. (22.86 cm) 2.25 in. (5.7 cm) 12 in. (30.4 cm) 5.5 lbs. (2.49 kg) 1 800-438-9336 • CHECKERS-SAFETY.COM CHECKERS™ 620 Compton St Broomfield, CO 80020 PHONE: (800) 438-9336 FAX: (720) 890-4858 EMAIL: [email protected] www.checkers-safety.com Ver: 5/19 Justrite™ Safety Group is the leading source of safety equipment for flammables and hazardous materials A PRODUCT OF: storage and handling, asset protection, environmental protection spill containment, absorbents, special- ized chemical storage, cable management, safety showers, eye/face washes, matting, and vehicle safety equipment. Learn more at Justrite.com, Checkers-safety.com, and Notrax.com..
Recommended publications
  • Manual on Uniform Traffic Control Devices Manual on Uniform Traffic
    MManualanual onon UUniformniform TTrafficraffic CControlontrol DDevicesevices forfor StreetsStreets andand HighwaysHighways U.S. Department of Transportation Federal Highway Administration for Streets and Highways Control Devices Manual on Uniform Traffic Dotted line indicates edge of binder spine. MM UU TT CC DD U.S. Department of Transportation Federal Highway Administration MManualanual onon UUniformniform TTrafficraffic CControlontrol DDevicesevices forfor StreetsStreets andand HighwaysHighways U.S. Department of Transportation Federal Highway Administration 2003 Edition Page i The Manual on Uniform Traffic Control Devices (MUTCD) is approved by the Federal Highway Administrator as the National Standard in accordance with Title 23 U.S. Code, Sections 109(d), 114(a), 217, 315, and 402(a), 23 CFR 655, and 49 CFR 1.48(b)(8), 1.48(b)(33), and 1.48(c)(2). Addresses for Publications Referenced in the MUTCD American Association of State Highway and Transportation Officials (AASHTO) 444 North Capitol Street, NW, Suite 249 Washington, DC 20001 www.transportation.org American Railway Engineering and Maintenance-of-Way Association (AREMA) 8201 Corporate Drive, Suite 1125 Landover, MD 20785-2230 www.arema.org Federal Highway Administration Report Center Facsimile number: 301.577.1421 [email protected] Illuminating Engineering Society (IES) 120 Wall Street, Floor 17 New York, NY 10005 www.iesna.org Institute of Makers of Explosives 1120 19th Street, NW, Suite 310 Washington, DC 20036-3605 www.ime.org Institute of Transportation Engineers
    [Show full text]
  • Application for Speed Bump Installation
    Oakland Department of Transportation APPLICATION FOR SPEED BUMP INSTALLATION ADVANTAGES AND DISADVANTAGES OF SPEED BUMPS Advantages: • The overall speed of traffic is reduced near speed bumps. • Speed bumps create an impression that discourages speeding and “cut through” trafficking. • Speed bumps are self-enforcing. Disadvantages: • The response time for emergency vehicles may be increased by speed bumps. • Some residents may object to the visual impact of speed bumps—the signs and the markings that accompany them. • There will be an increase in vehicle emissions and noise near speed bumps. • Inconvenient access as a result of speed bumps may be imposed on some parts of the neighborhood. • Speed bumps may displace traffic to neighboring streets. • Although speeds will be reduced immediately next to them, drivers tend to speed up after passing or traveling between speed bumps. REQUESTER INFORMATION A. Location Please provide the name of the street block to be considered. Indicate the boundaries of the block by identifying the intersecting street on each end. A separate application is required for another block. Street Name: _____________________________________________ From: _____________________________________ To: _________________________________ B. Contact Information Each application must contain a contact person who will receive all correspondence from the City and be responsible for gathering evidence of support when requested. Name: ________________________________ Email Address: ____________________________ Address: _________________________________________________ Zip Code: ______________ Daytime Phone #: _______________________ Additional Phone #: _________________________ C. Concerns Please tell us about the specific concerns you have for this segment of the street. _________________________________________________________________________________ _________________________________________________________________________________ NOTE THAT AFTER RECEIVING A QUALIFYING PETITION THE CITY WILL CONDUCT AN INSPECTION TO DETERMINE IF SPEED BUMPS ARE FEASIBLE.
    [Show full text]
  • Costing of Bicycle Infrastructure and Programs in Canada Project Team
    Costing of Bicycle Infrastructure and Programs in Canada Project Team Project Leads: Nancy Smith Lea, The Centre for Active Transportation, Clean Air Partnership Dr. Ray Tomalty, School of Urban Planning, McGill University Researchers: Jiya Benni, The Centre for Active Transportation, Clean Air Partnership Dr. Marvin Macaraig, The Centre for Active Transportation, Clean Air Partnership Julia Malmo-Laycock, School of Urban Planning, McGill University Report Design: Jiya Benni, The Centre for Active Transportation, Clean Air Partnership Cover Photo: Tour de l’ile, Go Bike Montreal Festival, Montreal by Maxime Juneau/APMJ Project Partner: Please cite as: Benni, J., Macaraig, M., Malmo-Laycock, J., Smith Lea, N. & Tomalty, R. (2019). Costing of Bicycle Infrastructure and Programs in Canada. Toronto: Clean Air Partnership. CONTENTS List of Figures 4 List of Tables 7 Executive Summary 8 1. Introduction 12 2. Costs of Bicycle Infrastructure Measures 13 Introduction 14 On-street facilities 16 Intersection & crossing treatments 26 Traffic calming treatments 32 Off-street facilities 39 Accessory & support features 43 3. Costs of Cycling Programs 51 Introduction 52 Training programs 54 Repair & maintenance 58 Events 60 Supports & programs 63 Conclusion 71 References 72 Costing of Bicycle Infrastructure and Programs in Canada 3 LIST OF FIGURES Figure 1: Bollard protected cycle track on Bloor Street, Toronto, ON ..................................................... 16 Figure 2: Adjustable concrete barrier protected cycle track on Sherbrook St, Winnipeg, ON ............ 17 Figure 3: Concrete median protected cycle track on Pandora Ave in Victoria, BC ............................ 18 Figure 4: Pandora Avenue Protected Bicycle Lane Facility Map ............................................................ 19 Figure 5: Floating Bus Stop on Pandora Avenue ........................................................................................ 19 Figure 6: Raised pedestrian crossings on Pandora Avenue .....................................................................
    [Show full text]
  • Policy on Children at Play Signs
    MUNICIPALITY OF ANCHORAGE Traffic Department SPEED HUMP FREQUENTLY ASKED QUESTIONS HUMPS VERSUS BUMPS? A speed hump is a (typically) rounded traffic calming device designed to reduce vehicles speeds on residential streets. They are constructed across the road, and, often installed in a series of several humps to reduce the potential for drivers to gain any significant benefit from speeding once the vehicle has crossed the hump. The height of the device ranges from 3 to 4 inches, and, is typically 13 feet long (as measured along the center of the road) for the humps used here in Anchorage, and is constructed to a very specific curvature over which the vehicles travel. In addition, warning signs are placed at the location of the device to provide information that the hump is located on the road (important to motorists, emergency responders, and street maintenance personnel) and pavement markings on the hump to provide an added visual warning of the device. Humps are used in locations on residential streets with low to moderate volumes (typically no less than 500 vehicles per day – about 50 homes and no greater than 1000 to 1500 vehicles per day), and not major roadways serving as connections between neighborhoods, and are rarely used on bus routes or primary emergency response routes. 1. What is a speed hump, and what is its purpose? A speed hump is a traffic control/calming device constructed with asphalt concrete. It is constructed to a very specific design that uses one of several potential vertical layouts, and used to control speeds – typically effective only when several humps are used on a section of roadway, about 400 to 500 feet apart.
    [Show full text]
  • Traffic Calming Traffic Calming Traffic Calming Traffic Calming
    Traffic Calming Traffic Calming Traffic Traffic Calming Traffic Traffic Calming Traffic Calming .............................................................................................................................173 Cycle Segregation Unit .......................................................................................................184 B Traffic Islands - Permanent ...................................................................................................174 www.marshalls.co.uk/commercial/traffic-calming Traffic Islands - Demountable .............................................................................................175 Protective Guardrailing ...........................................................................................................176 Traffic Ramps .................................................................................................................................177 S-Ramp .............................................................................................................................................178 Speed Cushions ...........................................................................................................................179 Speedcheck ...................................................................................................................................180 Keycheck ..........................................................................................................................................181 Interlocking Traffic Blocks
    [Show full text]
  • DDOT Speed Hump Engineering Guide
    DDOT Speed Hump Request Procedures and Page 1 of 19 Engineering Guide lines 2010 D ISTRICT D EPARTMENT OF T RANSPORTATION Page 2 of 19 Table of Contents INTRODUCTION ....................................................................................................................................................... 3 ELIGIBILITY CRITERIA FOR SPEED HUMPS .................................................................................................. 3 POTENTIAL IMPACTS OF SPEED HUMPS ......................................................................................................... 4 REQUEST PROCEDURES FOR SPEED HUMP INSTALLATION ................................................................... 4 ENGINEERING EVALUATION PRIOR TO INSTALLATION ......................................................................... 5 INSTALLATION OF SPEED HUMPS .................................................................................................................... 5 MODIFICATION OR REMOVAL OF SPEED HUMPS ....................................................................................... 5 SPEED HUMP ENGINEERING DESIGN GUIDELINES .................................................................................... 6 REQUEST FORM & PETITION FOR SPEED HUMP INSTALLATION ....................................................... 14 REQUEST FORM & PETITION FOR REMOVAL OF SPEED HUMPS.......................................................... 17 Page 3 of 19 I. Introduction (75%) support of the households in the candidate block or street segment.
    [Show full text]
  • Cost Analysis of Bicycle Facilities: Cases from Cities in the Portland, OR Region
    Cost Analysis of Bicycle Facilities: Cases from cities in the Portland, OR region FINAL DRAFT Lynn Weigand, Ph.D. Nathan McNeil, M.U.R.P. Jennifer Dill, Ph.D. June 2013 This report was supported by the Robert Wood Johnson Foundation, through its Active Living Research program. Cost Analysis of Bicycle Facilities: Cases from cities in the Portland, OR region Lynn Weigand, PhD, Portland State University Nathan McNeil, MURP, Portland State University* Jennifer Dill, PhD, Portland State University *corresponding author: [email protected] Portland State University Center for Urban Studies Nohad A. Toulan School of Urban Studies & Planning PO Box 751 Portland, OR 97207-0751 June 2013 All photos, unless otherwise noted, were taken by the report authors. The authors are grateful to the following peer reviewers for their useful comments, which improved the document: Angie Cradock, ScD, MPE, Harvard T.H. Chan School of Public Health; and Kevin J. Krizek, PhD, University of Colorado Boulder. Any errors or omissions, however, are the responsibility of the authors. CONTENTS Executive Summary ................................................................................................................. i Introduction .............................................................................................................................. 3 Bike Lanes................................................................................................................................ 7 Wayfinding Signs and Pavement Markings .................................................................
    [Show full text]
  • Costs for Pedestrian and Bicyclist Infrastructure Improvements
    Costs for Pedestrian and Bicyclist Infrastructure Improvements A Resource for Researchers, Engineers, Planners, and the General Public Authors: Max A. Bushell, Bryan W. Poole, Charles V. Zegeer, Daniel A. Rodriguez UNC Highway Safety Research Center Prepared for the Federal Highway Administration and supported by the Robert Wood Johnson Foundation through its Active Living Research program October, 2013 Contents Acknowledgements ....................................................................................................................................... 3 Authors .......................................................................................................................................................... 3 The Highway Safety Research Center ........................................................................................................... 4 Cover Page Photo Credits ..................................................................................................................... 4 Executive Summary ....................................................................................................................................... 5 Making the Case for Pedestrian and Bicycle Infrastructure ......................................................................... 6 Walking/Bicycling and Public Health ............................................................................................................ 7 Methodology ................................................................................................................................................
    [Show full text]
  • Download Regulation of Speed Bumps on Local Highways
    GENERAL BUSINESS LAW § 599-a; HIGHWAY LAW §§ 10, 102, 193, 194, 195; VEHICLE AND TRAFFIC LAW §§ 153, 1621, 1680, 1682; 17 N.Y.C.R.R. Part V, § 200.9(b) Installation of a speed bump on a town highway is not prohibited by State law, but is regulated as a highway design feature. October 28, 2003 Richard W. Hoyt, Esq. Informal Opinion Town Attorney No. 2003-15 Town of Montgomery 43 Orchard Street P.O. Box 402 Walden, New York 12586 Dear Mr. Hoyt: You have asked, in your capacity as attorney for the Town of Montgomery, whether the Town is authorized to install “speed bumps” or similar speed control devices on a town highway. You have specified that the Town is interested in using such devices to slow traffic on a short town highway that serves as a connection between two state highways. We conclude that the installation of a speed bump on a town highway is not prohibited by State law, but is regulated as a highway design feature. Background Speed bumps are installations of raised pavement on roads or parking lots intended to slow vehicular traffic; they are generally three to six inches in height and one to three feet in length across the roadway or driving area. See JKS Associates, Inc., INCA Engineers, Inc. & R. David MacDonald, A Guidebook for Residential Traffic Management 41 (Dec. 1994), reprinted in N.Y.S. Dep’t of Transportation, Highway Design Manual, ch. 25, App. A (Rev. 36, Feb. 5, 1999). Speed bumps generally are intended to reduce vehicle speeds to five to ten miles per hour.
    [Show full text]
  • Traffic Calming: Speed Humps and Speed Cushions. (2011)
    Traffic Calming Speed Humps and Speed Cushions Catherine Berthod, Engineer and Urban Planner Ministère des Transports du Québec Presentation prepared for the session on How To Encourage the Safe Coexistence of Different Modes of Transportation 2011 Annual Conference of the Transportation Association of Canada in Edmonton, Alberta Summary Speed management is an essential tool in ensuring the improved safety of users of urban roads, particularly vulnerable users. It relies on several measures: awareness campaigns, speed control, as well as the development and operation of the road infrastructure. Municipalities are increasingly resorting to the development of traffic calming measures. They are facing numerous questions concerning the installation and effectiveness of traffic calming measures but are unable to easily find answers in French-language documentation. To respond to this need, the ministère des Transports du Québec has begun publishing a series of fact sheets on a variety of traffic calming measures including: speed humps and speed cushions, raised crosswalks and intersections, neckdowns (curb extensions at intersections), the reduction of the width of streets, centre islands and chicanes. A general fact sheet introduces all of the measures and notably outlines the procedure for pre-implementation analysis. Each fact sheet dedicated to an individual measure outlines the implementation context, advantages and disadvantages, geometric characteristics, effectiveness at reducing speed, and maintenance requirements, including winter maintenance. The presentation will introduce the first two published fact sheets: the general fact sheet and the fact sheet on speed humps and speed cushions. The fact sheets as well as examples of measures implemented in municipalities are available on the ministère des Transports website at www.mtq.gouv.qc.ca under Partenaires – Municipalités – Sécurité routière.
    [Show full text]
  • The Impact of Traffic Calming Measures on Cyclists' and E
    Journal of Traffic and Logistics Engineering Vol. 8, No. 2, December 2020 The Impact of Traffic Calming Measures on Cyclists’ and E-Cyclists’ Safety Ghazwan Al-Haji Linköping University, Department of Science and Technology, Norrkoping, Sweden Email: [email protected] Abstract—Cycling is a sustainable transport mode, overrepresented due to weather conditions in winter especially in urban areas for short distances. Electric bikes mainly. and electric scooters are increasingly emerging into traffic There are different factors that can elevate the cyclist network in cities in Sweden due to advantages related to traffic accident rates: trip length, weather, age, gender, accessibility, environment, etc. However, they bring speed, topography, infrastructure, road user behaviour, questions in terms of traffic risk and accidents. The road infrastructure must be adapted to accommodate the type of facilities, etc. Sweden is one of the leading increasing share of these new types of bikes in traffic. The countries within traffic safety. It has managed to reduce study will assess both bikes and e-bikes safety according to the number of cyclist fatalities during last decades. This exposure, risk and consequences. The study will review is due to a successful planning and implementation of relevant literature on Traffic Calming Measures (TCMs). It traffic safety policies, which have included a number of will develop a conceptual framework to determine the prevention and remedial measures in traffic engineering, impact of different TCMs (horizontal and vertical) on traffic enforcement, road user education, safe infrastructure, safety for both traditional and e-bikes safety. Accident data separated bikes lanes, increase usage of helmets, regular from the Swedish Traffic Accident Data Acquisition cycle paths inspection, traffic signals for cyclists, priority (STRADA) will be collected and analysed in order to identify roundabouts (as a chosen type of TCMs) with high lanes, etc [4].
    [Show full text]
  • Minnesota Manual on Uniform Traffic Control Devices Minnesota Manual
    Minnesota Manual on Uniform Traffic Control Devices MN MUTCD February 2018 MINNESOTA MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES MN MUTCD February 2018 Minnesota Manual on Uniform Traffic Control Devices TABLE OF CONTENTS Forward Introduction PART 1. GENERAL Chapter 1A. GENERAL PART 2. SIGNS Chapter 2A. GENERAL Chapter 2B. REGULATORY SIGNS Chapter 2C. WARNING SIGNS AND OBJECT MARKERS Chapter 2D. GUIDE SIGNS - CONVENTIONAL ROADS Chapter 2E. GUIDE SIGNS - FREEWAYS AND EXPRESSWAYS Chapter 2F. TOLL ROAD SIGNS Chapter 2G. PREFERENTIAL AND MANAGED LANE SIGNS Chapter 2H. GENERAL INFORMATION SIGNS Chapter 2I. GENERAL SERVICE SIGNS Chapter 2J. SPECIFIC SERVICE (LOGO) SIGNS Chapter 2K. TOURIST-ORIENTED DIRECTIONAL SIGNS Chapter 2L. CHANGEABLE MESSAGE SIGNS Chapter 2M. RECREATIONAL AND CULTURAL INTEREST AREA SIGNS Chapter 2N. EMERGENCY MANAGEMENT SIGNING PART 3. MARKINGS Chapter 3A. GENERAL Chapter 3B. PAVEMENT AND CURB MARKINGS Chapter 3C. ROUNDABOUT MARKINGS Chapter 3D. MARKINGS FOR PREFERENTIAL LANES Chapter 3E. MARKINGS FOR TOLL PLAZAS Chapter 3F. DELINEATORS Chapter 3G. COLORED PAVEMENTS Chapter 3H. CHANNELIZING DEVICES USED FOR EMPHASIS OF PAVEMENT MARKING PATTERNS Chapter 3I. ISLANDS Chapter 3J. RUMBLE STRIP MARKINGS PART 4. HIGHWAY TRAFFIC SIGNALS Chapter 4A. GENERAL Chapter 4B. TRAFFIC CONTROL SIGNALS - GENERAL Chapter 4C. TRAFFIC CONTROL SIGNAL NEEDS STUDIES Chapter 4D. TRAFFIC CONTROL SIGNAL FEATURES Chapter 4E. PEDESTRIAN CONTROL FEATURES Chapter 4F. PEDESTRIAN HYBRID BEACONS Chapter 4G. TRAFFIC CONTROL SIGNALS AND HYBRID BEACONS FOR EMERGENCY VEHICLE ACCESS Chapter 4H. TRAFFIC CONTROL SIGNALS FOR ONE-LANE, TWO-WAY FACILITIES Chapter 4I. TRAFFIC CONTROL SIGNALS FOR FREEWAY ENTRANCE RAMPS Chapter 4J. TRAFFIC CONTROL FOR MOVABLE BRIDGES Chapter 4K HIGHWAY TRAFFIC SIGNALS AT TOLL PLAZAS Chapter 4L.
    [Show full text]