http://www.pemkorea.com

Jochiwon Factory 519 Yeongi-Ri, Nam-Myeon, Yeongi-Gun, Chungcheongnam-Do, 339-823, Korea TEL: 82-41-860-3600 FAX: 82-41-863-0742

Seoul Office 4F, Hwansung B/D, 23 Yangjae-Dong, Seocho-Gu, , 137-130, Korea TEL: 82-2-6201-1600 FAX: 82-2-6201-1699

The above content has been accurately composed based on facts. However, it serves for referencing purposes only, and does not constitute any kind of guarantee whatsoever.Therefore, no responsibility on the part of PEM KOREA CO., LTD can be claimed for particulars in relation to the above content that are not discussed beforehand. The above content can be changed without notice. http://www.pemkorea.com DEVELOPMENT ENTERPRISE, WILL HELP CREATE A PLEASANT AND FULFILLING LIFE

PEM KOREA CO., LTD. is endeavoring in the manufacture and development of envi- ronment friendly products to preserve the nature and human life. PEM KOREA has taken over the plastic processing department of DAELIM INDUS- PB/PE-RT PIPE TRIAL CO., LTD. whose excellence in construction, engineering and environmental works has been recognized since its entry into the field of plastic processing in 1987. PEM KOREA will be reborn as a specialized company that supplies environ- ment-friendly products by further developing the synthetic plastic processing industry which has been playing a major role in the field of construction, engineering and environmental works.

Company History

1987 DAELIM INDUSTRIAL CO., LTD. ENTERED PLASTIC PROCESSING BUSINESS 1992 MOVED PLASTIC PIPE PROCESSING PLANT IN (KOREA) 1994 QUALIFIED TO ISO 9002 2004 ENTERED BUILDING MATERIAL BUSINESS (PB/PE-RT PIPE & FITTINGS) 2005 CERTIFICATION CHANGED FROM ISO9002 TO ISO9001 2007 PEM KOREA CO., LTD. UNDERTOOK THE PLASTIC PROCESSING DEPARTMENT OF DAELIM INDUSTRIAL CO., LTD. PB/PE-RT PIPE

PB/PE-RT PIPE

General Properties of PEM Pipe Material - PB Specification

PB resins are flexible, linear polyolefin offering a unique combination of properties. They are produced 1. PROPERTIES from 1-butene as homopolymers and as copolymers with ethylene. Some of their important characteris- tics are: excellent resistance to creep at room and elevated temperatures - no failures after long term PROPERTIES P B PE-RT loading at 90% of yield strength; good toughness (high yield strength, high impact strength, high tear DENSITY 3 0.939 0.933 TEST METHOD UNIT strength, high puncture resistance); and exceptional resistance to environmental stress cracking. MELT FLOW RATE g/10min 0.35 0.64 ASTM D1505 g/cm TENSILE STRENGTH (YIELD) Kgf/cm2 200 150 HIGH FLEXIBILITY TENSILE STRENGTH (BREAK) ASTM D1238 Kgf/cm2 370 390 PB has the lowest flexural modulus of all the polymer resins used for domestic hot and cold water ELONGATION ASTM D 638 % 330 800 plumbing pipes. Longer pipe runs can be used to accommodate change of direction. IZOD IMPACT STRENGTH ASTM D 638 kg E S C R ASTM D 638 cm/cm No Break No Break TENSILE STRENGTH/PRESSURE PERFORMANCE SHORE HARDNESS ASTM D 256 Hour 10,000 10,000 Pipes made from PB-1 has very high tensile strength even at higher temperatures resulting in MODULUS OF ELASTICITY ASTM D1693 Shore D 53 53 high-pressure resistance and higher design stress than other plastic pipes also at elevated tempera- MELTING POINT ASTM D2240 kgf/cm2 5,400 5,400 tures. This allows enhanced flexibility and lower wall thickness, as well as larger bore diameter providing THERMAL CONDUCTIVITY ASTM D 790 kcal/mh 0.33 0.4 ASTM C 177 greater and necessary water flow through pipes, resulting in excellent performance from plumbing 10-4cm/cm 1.3 1.4 installations. ASTM D 696

CREEP RESISTANCE 2. DIMENSION The Polybutene-1 (PB-1) pipe has excellent creep resistance that can not be attained by any other poly- mer used for plumbing purposes today. By reason of this PB-1 pipes maintain their unique pressure per- KS SIZE ISO SIZE formance over very long service life times. OUT DIA. THICK. LENGTH(m) OUT DIA. THICK. LENGTH(m) DN/OD DN/OD MIN. MAX. MIN. MAX. ROLL MIN. MAX. MIN. MAX. PIPE ROLL 13 12.6 12.8 1.6 PIPE1.9 6 100 12 12.0 12.3 1.8 2.1 6 100 15 15.8 16.0 1.6 1.9 6 100 16 16.0 16.3 1.8 2.1 6 100 22 22.1 22.3 2.0 2.3 6 100 20 20.0 20.3 1.9 2.2 6 100 28 27.9 28.2 2.6 3.0 6 - 25 25.0 25.3 2.3 2.7 6 - Performance Benefits of PEM PB Pipe 35 34.8 35.0 3.2 3.4 6 - 32 32.0 32.3 2.9 3.3 6 -

EASIER INSTALLATION The flexibility of PB pipes also provides easier installation in confined spaces. PB pipe is lightweight and 3. TEMPERATURE USED colored grey for ease of identification.

PB PIPE *ys(years) : Life Span CORROSION FREE Pipe produced from PB-1 will not corrode like traditional pipes ie copper or GI because it does not react TEMP. ( ) 20 (50ys) 40 (50ys) 60 (50ys) 70 (50ys) 80 (25ys) 95 (10ys) with ionic species commonly found in water and the service environment. Use of PEM PB pipes enables MAX. PRESS. (kg/ ) 16.3 14.0 10.7 9.0 7.5 5.0 use of a wide variety of PEM polymer fittings, eliminating the use of solder and solvents. PEM PB system unlike copper will not corrode and leach, harmful and dangerous substance into the potable water. PE-RT PIPE

TEMP. ( ) 20 40 50 60 70 80 MAX. PRESS. (kg/ ) 12.3 10.0 8.9 7.6 6.7 5.8

4 PEM KOREA. CO., LTD. 5 PEM KOREA. CO., LTD. PB/PE-RT PIPE

PB/PE-RT PIPE

Installation Guidance for PUSH - FIT System PB HOT WATER PIPE PB FLOOR HEATING

Hot Water Heating 15 (16) 15 (16) 22 (20) 22 (20) 28 (25) 28 (25) 35 (32) 35 (32) PIPE CUTTING SUPPORT SLEEVE INSERT PIPE & FITTING INSERT Mark the spot where you want Support Sleeve, an integral The pipe should be inserted to cut with pen. Then, cut the part of the joint, needs to be into the fitting to full socket pipe smoothly and accurately fully inserted inside the pipe length such that the length in right angle by using PEM before connecting the pipe made alignment with the outer KOREA’s cutter into the PEM’s PB Fitting or end of the cap on the fittings. Brass Fitting. PE-RT HOT WATER PIPE PE-RT FLOOR HEATING

Hot Water Heating 15 (16) 15 (16) 22 (20) 22 (20) 28 (25) 28 (25) DO NOT RE-JOINT DO NOT USE TOOL DO NOT SUDDEN BEND 35 (32) 35 (32) PEM pipe should not be Cap is factory fitted part to The PEM pipe must not be removed from the fitting by obtain the proper torque, bent after connection. If it was removing the cap. If you need requires no further more tight- bent, it could cause to be leak- out of joint it, never use the ening. If cap becomes loose, it age point, or damage the grip same grab ring twice and must can be tighten by had, easily, ring. follow the PEM’s assemble without using tool.must follow method the PEM’s assemble method

INSULATION CD PIPE

Hot Water / Heating Hot Water / Heating 15 (16) 15 (16) 22 (20) 22 (20) 28 (25) 28 (25) NOTICE OF SURFACE DAMAGE, USING EXCLUSIVE CUTTER IS SEE THE INDICATED MARK FOR 35 (32) 35 (32) DURING CARRIAGE AND STORAGE RECOMMENDED ACCURATE INSERTION

6 PEM KOREA. CO., LTD. 7 PEM KOREA. CO., LTD. PB/PE-RT PIPE

PB/PE-RT SYSTEM

PEM Manifold, Fitting and Service Box List PEM Manifold, Fitting and Service Box List

HEADER HEADER BOILER BOX/COVER SERVICE BOX 90SERVICE ELBOW 40SERVICE ELBOW 1 Layer PB, XL 330 170 90 90 15 15 (W 2 Layer H D)

CIRCLE SERVICE FITTING CAP SEALING CAP HEADER BOX HEADER BOX HEADER BOX 15 22(20) 22(20) 8 Outlets 6 Outlets 5 Outlets 28(25) 28(25) 570410120 458 410120 390 410120 (W (W (W H D) H D) H D)

CD CONNECTOR ANTI NOISE RING NORMAL BEND JOINT BOX JOINT BOX (OPEN TYPE) HEADER COVER 22(20) 22(20) 22(20) 250 200 80 300 250 80 8 Outlets 28(25) 28(25) 28(25) (W (W H D) H D) 6 Outlets 5 Outlets

GUIDE BALL CD TUBE FLOOR PANEL

JOINT BOX COVER JOINT BOX (OPEN TYPE) HEADER BOX 15 22(20) 15(16) COVER 8 Outlets 22 28(25) 400 400 22 6 Outlets 28 (W H D) 5 Outlets

BRASS FITTING

JOINT BOX CIRCLE SERVICE BOX SERVICE BOX BRASS ELBOW BRASS ELBOW MALE BRASS ELBOW 300 150 80 40 90 15 (Front Stud) 15 (W H D) 22 15 22 28 28

JOINT BOX COVER CIRCLE LONG SERVICE BOX CIRCLE SERVICE BOX LONG BRASS ELBOW LONG BRASS ELBOW UNEQUAL BRASS ELBOW (Front Stud) 40 for Masonry 15 20*15 40 15

8 PEM KOREA. CO., LTD. 9 PEM KOREA. CO., LTD. PB/PE-RT PIPE

PB/PE-RT SYSTEM

BRASS FITTING BRASS FITTING

F. SERVICE TEE SERVICE TEE (Front Stud) M. SERVICE TEE MALE BALL VALVE FEMALE BALL VALVE RING JOINT BALL VALVE (W/BRASS) (W/BRASS) (W/BRASS) 15 15 PB/XL 15 15 15 15C 22 15 15C 22C

MALE BALL VALVE FEMALE BALL VALVE 4 WAY TEE 15 15 15

LONG F. SERVICE TEE LONG F. SERVICE TEE F. VALVE SOCKET (W/BRASS 15C 22 15C (W/BRASS) (Front Stud) 15 22C 15 15 22 28 35 ELBOW ADAPTOR 4 WAY TEE (for PB) BRASS ELBOW (4P) 15 15 15

M BALL VALVE ADAPTOR F. VALVE SOCKET (Front Stud) F. VALVE SOCKET (Mid Stud) UNEQUAL F. VALVE SOCKE (W/BRASS)T 15 15 15 22*15 15C 28*22 35*28 PB / PE-RT FITTING

SOCKET ELBOW EQUAL TEE 15(16) 15(16) 15(16) 22(20) 22(20) 22(20) 28(25) 28(25) 28(25) M. VALVE SOCKET M. VALVE SOCKET UNEQUAL M. VALVE SOCKET 35(32) 35(32) 35(32) (Front Stud) 15 22*15

22 15 28*22 UNEQUAL SOCKET REDUCER AIR CHAMBER CAP 28 35*28 22(20)*15(16) 22(20)*15(16) 15(16) 35 28(25)*22(20) 35(32)*28(25)

CF ADAPTOR CM ADAPTOR RING JOINT ADAPTOR UNEQUAL TEE (BRT) UNEQUAL TEE (ERT) UNEQUAL TEE (BOLT)

15 15 PB/XL 22(20)*15(16)*22(20) 22*22*15 22*15*15 22 22 15 28(25)*15(16)*28(25) (20)*(20)*(16) (20)*(16)*(16) 35(32)*15(16)*35(32) 28 28 35(32)*22(20)*35(32)

10 PEM KOREA. CO., LTD. 11PEM KOREA. CO., LTD. PB/PE-RT PIPE

PB/PE-RT SYSTEM

MISCELLANEOUS SERVICE PLATE

CAP SOCKET RING GRAP RING 15 (16) 15 (16) 15 (16) 22 (20) 22 (20) 22 (20) 28 (25) 28 (25) 35 (32) 35 (32)

SERVICE BOX WITH PLATE (A type Single)

WASHER O-RING SUPPORT SLEEVE Adaptor Valve Socket Adaptor Valve Socket SERVICE BOX WITH PLATE (A type Double) 15 (16) 15 (16) 15 Service Box Air Chamber Service Box Air Chamber 22 (20) 22 (20) 22 Brass Tee Brass Chamber Brass Tee Brass Chamber 28 (25) 28 (25) 28 35 (32) 35 (32) 35

B. CAP PB PIPE CUTTER CD PIPE CUTTER 15 (16) FREE 15 22 (20) 22 SERVICE BOX WITH PLATE (B type Single) 28 (25) 28 35 (32) SERVICE BOX WITH PLATE (B type Double)

Adaptor Valve Socket Adaptor Valve Socket Service Box Air Chamber Service Box Air Chamber Brass Tee Brass Chamber Brass Tee Brass Chamber STOPPING PLUG WATER HAMMER ARREST (Cr.) WATER HAMMER ARREST 15 (16) 15A 15A 22 (20) 15AA 15AA 28 (25)

WATER HAMMER ARREST (ELBOW TYPE)AIR CHAMBER BRASS TEE LONG AIR CHAMBER BRASS TEE 15AA 15 15 CIRCLE SERVICE BOX WITH PLATE(SINGLE Type)CIRCLE SERVICE BOX WITH PLATE (DOUBLE Type)

Adaptor Valve Socket Adaptor Valve Socket Service Box Air Chamber Service Box Air Chamber Brass Tee Brass Chamber Brass Tee Brass Chamber

12 PEM KOREA. CO., LTD. 13PEM KOREA. CO., LTD. PB/PE-RT PIPE

PEM Products Certificates Sales Network

ISO 9001 KS M 3363 KS M 3407

Seoul Region Dongseo Plastic Dongyoung Plastic Daelim Pipe Co., Ltd. Jinseung Pipe Daelim PEM Gapyung Daelim Construction Incheon Daelim PEM Eudeum Industry Siheung Daelim Plasco

Suwon Daejin Pipe Yeongi Yeonggwang Industry Daeseong T&P Uiwang Daedong Pipe Daejeon PEM Network KS M 3408-2 KS M 3408-3 KS M 3416 Asan Haryong Construction Daegu Daelim Pipe Seosan Busan Daelim Pipe

Daehan Construction Materials Supplier

Gwangju Daelim Plastic

Jeonju Boas Yeosu Daelim Pipe Geoje Daelim Pipe

KS M 3514 KS M 3515 KS M 8085-2 Seoul Jochiwon

Marketing headquartersManagement headquartersProduction headquartersCentral Operation Center Marketing planning teamDepartment of Pipe-related products Engineering materialsmanagement planning Pipe parts Technology Research Center department Injection-molded product Construction materials Geo Sheet department Netlon

14 PEM KOREA. CO., LTD. PEM KOREA. CO., LTD.15