Nr Standard reference Title . Process management for avionics - Electronic components capability in 1 IEC TR 62240-1:2018 operation - Part 1: Temperature uprating 2 IEC 60034:2018 SER Rotating electrical machines - ALL PARTS Amendment 16 - Lamp caps and holders together with gauges for the IEC 60061- 3 control of interchangeability and safety - Part 4: Guidelines and 4:1990/AMD16:2018 general information 4 IEC 60071:2018 SER Insulation co-ordination - ALL PARTS 5 IEC 60071-2:2018 Insulation co-ordination - Part 2: Application guidelines IEC 60076- Amendment 1 - Power transformers - Part 3: Insulation levels, 6 3:2013/AMD1:2018 dielectric tests and external clearances in air Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830°C 7 IEC 60331-1:2018 for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830°C 8 IEC 60331-2:2018 for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830°C 9 IEC 60331-3:2018 for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure Low-voltage electrical installations - Part 7-711: Requirements for 10 IEC 60364-7-711:2018 special installations or locations - Exhibitions, shows and stands IEC 60404- Corrigendum 1 - Amendment 1 - Magnetic materials - Part 2: Methods 11 2:1996/AMD1:2008/COR1:20 of measurement of magnetic properties of electrical steel strip and 18 sheet by means of an Epstein frame Corrigendum 1 - Magnetic materials - Part 10: Methods of IEC 60404- 12 measurement of magnetic properties of electrical steel strip and sheet 10:2016/COR1:2018 at medium frequencies Test on gases evolved during combustion of materials from cables - 13 IEC 60754-3:2018 Part 3: Measurement of low level of halogen content by ion chromatography 14 IEC 60799:2018 Electrical accessories - Cord sets and interconnection cord sets 15 IEC 62031:2018 LED modules for general lighting - Safety specifications Digital addressable lighting interface - Part 217: Particular 16 IEC 62386-217:2018 requirements for control gear - Thermal gear protection (device type 16) Digital addressable lighting interface - Part 218: Particular 17 IEC 62386-218:2018 requirements for control gear - Dimming curve selection (device type 17) Digital addressable lighting interface - Part 224: Particular 18 IEC 62386-224:2018 requirements for control gear - Non-replaceable light source (device type 23) Amendment 1 - General lighting - Light emitting diode (LED) products 19 IEC 62504:2014/AMD1:2018 and related equipment - Terms and definitions Residual direct current detecting device (RDC-DD) to be used for 20 IEC 62955:2018 mode 3 charging of electric vehicles High voltage direct current (HVDC) power transmission - System 21 IEC TS 63014-1:2018 requirements for DC-side equipment - Part 1: Using line-commutated converters Ferrite cores - Guidelines on dimensions and the limits of surface 22 IEC 63093-7:2018 irregularities - Part 7: EER-cores Equipment for general lighting purposes - Objective test method for 23 IEC TR 63158:2018 stroboscopic effects of lighting equipment IEC 62052- Corrigendum 1 - Amendment 1 - Electricity metering equipment (A.C.) 24 21:2004/AMD1:2016/COR1:2 - General requirements, tests and test conditions - Part 21: Tariff and 018 load control equipment IEC 62054- Corrigendum 1 - Amendment 1 - Electricity metering (A.C.) - Tariff 25 11:2004/AMD1:2016/COR1:2 and load control - Part 11: Particular requirements for electronic ripple 018 control receivers IEC 62054- Corrigendum 1 - Amendment 1 - Electricity metering (A.C.) - Tariff 26 21:2004/AMD1:2017/COR1:2 and load control - Part 21: Particular requirements for time switches 018 Amendment 1 - Mechanical standardization of semiconductor devices - IEC 60191- 27 Part 4: Coding system and classification into forms of package outlines 4:2013/AMD1:2018 for semiconductor device packages IEC 61760- Amendment 1 - Surface mounting technology - Part 4: Classification, 28 4:2015/AMD1:2018 packaging, labelling and handling of moisture sensitive devices Measurement techniques of piezoelectric, dielectric and electrostatic 29 IEC 62884-3:2018 oscillators - Part 3: Frequency aging test methods Semiconductor devices - Semiconductor interface for automotive 30 IEC 62969-2:2018 vehicles - Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors IEC 61215- Corrigendum 1 - Terrestrial photovoltaic (PV) modules - Design 31 2:2016/COR1:2018 qualification and type approval - Part 2: Test procedures Recommendations for renewable energy and hybrid systems for rural 32 IEC TS 62257-7-3:2018 electrification - Part 7-3: Generator set - Selection of generator sets for rural electrification systems 33 IEC TS 62989:2018 Primary optics for concentrator photovoltaic systems IEC 60335-2- Interpretation sheet 1 - Amendment 2 - Household and similar 34 24:2010/AMD2:2017/ISH1:20 electrical appliances - Safety - Part 2-24: Particular requirements for 18 refrigerating appliances, ice-cream appliances and ice makers Medical electrical equipment - Part 2-30: Particular requirements for 35 IEC 80601-2-30:2018 the basic safety and essential performance of automated non-invasive sphygmomanometers Medical electrical equipment - Part 2-49: Particular requirements for 36 IEC 80601-2-49:2018 the basic safety and essential performance of multifunction patient monitors Magnetic materials - Part 8-11: Specifications for individual materials - 37 IEC 60404-8-11:2018 Fe-based amorphous strip delivered in the semi-processed state Magnetic materials - Part 16: Methods of measurement of the 38 IEC 60404-16:2018 magnetic properties of Fe-based amorphous strip by means of a single sheet tester Electrostatics - Part 5-2: Protection of electronic devices from 39 IEC TR 61340-5-2:2018 electrostatic phenomena - User guide IEC 62052- Corrigendum 1 - Amendment 1 - Electricity metering equipment (A.C.) 40 11:2003/AMD1:2016/COR1:2 - General requirements, tests and test conditions - Part 11: Metering 018 equipment IEC 62053- Corrigendum 1 - Amendment 1 - Electricity metering equipment (A.C.) 41 11:2003/AMD1:2016/COR1:2 - Particular requirements - Part 11: Electromechanical meters for 018 active energy (classes 0,5, 1 and 2) IEC 62053- Corrigendum 1 - Amendment 1 - Electricity metering equipment (A.C.) 42 21:2003/AMD1:2016/COR1:2 - Particular requirements - Part 21: Static meters for active energy 018 (classes 1 and 2) IEC 62053- Corrigendum 1 - Amendment 1 - Electricity metering equipment (A.C.) 43 22:2003/AMD1:2016/COR1:2 - Particular requirements - Part 22: Static meters for active energy 018 (classes 0,2 S and 0,5 S) IEC 62053- Corrigendum 1 - Amendment 1 - Electricity metering equipment (A.C.) 44 23:2003/AMD1:2016/COR1:2 - Particular requirements - Part 23: Static meters for reactive energy 018 (classes 2 and 3) IEC 62053- Corrigendum 1 - Amendment 1 - Electricity metering equipment (A.C.) 45 24:2014/AMD1:2016/COR1:2 - Particular requirments - Part 24: Static meters for reactive energy at 018 fundamental frequency (classes 0,5 S, 1 S and 1) Electricity metering - Payment systems - Part 41: Standard transfer 46 IEC 62055-41:2018 specification (STS) - Application layer protocol for one-way token carrier systems Digital audio - Interface for non-linear PCM encoded audio bitstreams 47 IEC 61937:2018 SER applying IEC 60958 - ALL PARTS IEC 61937- Amendment 2 - Digital audio - Interface for non-linear PCM encoded 48 2:2007/AMD2:2018 audio bitstreams applying IEC 60958 - Part 2: Burst-info Railway applications - Rolling stock - Batteries for auxiliary power 49 IEC 62973-1:2018 supply systems - Part 1: General requirements Road vehicles - Vehicle to grid communication interface - Part 4: 50 ISO 15118-4:2018 Network and application protocol conformance test Road vehicles - Vehicles to grid communication interface - Part 5: 51 ISO 15118-5:2018 Physical and data link layer conformance tests Road vehicles - Vehicle to grid communication interface - Part 8: 52 ISO 15118-8:2018 Physical layer and data link layer requirements for wireless communication Safety of machinery - Application of protective equipment to detect 53 IEC 62046:2018 the presence of persons Communication networks and systems for power utility automation - 54 IEC 61850:2018 SER ALL PARTS Communication networks and systems for power utility automation - 55 IEC TS 61850-7-7:2018 Part 7-7: Machine-processable format of IEC 61850-related data models for tools Energy management system application program interface (EMS-API) - 56 IEC 61970:2018 SER ALL PARTS Energy management system application program interface (EMS-API) - 57 IEC 61970-456:2018 Part 456: Solved power system state profiles Framework for energy market communications - Part 301: Common 58 IEC 62325-301:2018 information model (CIM) extensions for markets Power systems management and associated information exchange - 59 IEC TS 62361-102:2018 Interoperability in the long term - Part 102: CIM - IEC 61850 harmonization Classification of environmental conditions - Part 2: Environmental 60 IEC 60721-2-7:2018 conditions appearing in nature - Fauna and flora