Pliers Assortments Pliers Assortments 160 Mm 160 Mm 160 Mm 160 Mm 200 Mm 180 Mm 200 Mm 160 Mm Tic Box a 180 Mm

56_HHW_Katalog_2015_eng 03.09.1509:50Seite56.1 eng/OP inductively hardened. Steel C45,oil-hardenedandtempered,edges Quality Head highlypolished, chrome-plated. Type 0 inductively hardened. Steel C45,oil-hardenedandtempered,edges Quality Head highlypolished, chrome-plated. Type 4-piece 8-piece

Set contents Type Type Setcontents e otns ye Type Setcontents VDE4-piece 6-pieceinplas

1VDEwirestrippers 1VDEdiagonalcuttingpliers 1VDEﬂat-roundpliers 1VDEcombinationpliers Setcontents56100 201: 1Water pumppliers 1High-leverage diagonalcuttingpliers 1Telephone pliers,offset 1Telephone pliers, straight 1Diagonalcuttingpliers 1Combinationpliers Setcontents56100 103: 1Water pumppliers 1Diagonalcuttingpliers 1Flat-roundpliers 1Combinationpliers Setcontents56100 101: 1Diagonalcuttingpliers 1Flat-roundpliers, 1Flat-roundpliers, 1Roundnosepliers 1Long-noseroundpliers 1Flatnosepliers 1Long-noseﬂatpliers 1Combinationpliers Setcontents56119 +56120: 56119 -56120 56100 # = partly extent partly = stock.in i lsi o box inplastic in plastic box box inplastic in roll-up case inroll-up case 160 mm 160 mm 45° angled, 200mm straight,mm 200 250 mm 250 mm 160 mm 160 mm 200 mm 180 mm 160 mm 160 mm 200 mm Pliers assortments Pliers assortments 160 mm 160 mm 160 mm 160 mm 200 mm 180 mm 200 mm 160 mm tic box a 180 mm

= Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits. with 2-component non-slipgrips.with 2-component with VDEIEC 60900 4-piece. Type 56100 201 handles. Water pumppliers, polishedhead, dip-coated 6-piece. Handles non-slipgrips. with 2-component Type 56100 103 handles. Water pumppliers, polishedhead, dip-coated 4-piece. Type 56100 101 Handles with ergosoft Type ß 56120 Handles non-slipgrips. with 2-component Type 0 56119 0 Insulation handles(1000V)incompliance Handles non-slipgrips. with 2-component 56119

sprayed directly onhandles,

non-slip grips. 101 …

ß 56100 56120

201 103 101 101 … … Fax orderhotline: +496204739-1217 www.hhw.de 56100 201 56100 103 56100 101 56120 56119 56.1

Hand Tools eng/OP … 201 202 203 56138 56130 56132

56140 106 56140 56140 102 56140 56140 104 56140 VDE 56138 0

= partly extent in stock. = partly extent … # 101 102 103

56134 ß

… 101 102 103 …

102 106 104 56134 56132

56140 0

® ® … 101 102 103

in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales 56130 a 0 sprayed directly on handles, with 2-compo- with on handles, directly sprayed 56134 56134 ß Type handles with chrome-plated, highly polished, Head ergosoft handguard. grips with 56138 0 Type insulation chrome-plated, highly polished, Head handles (1000 V) in compliance VDE IEC with 60900 nent non-slip grips. handguard. With 56140 102 56140 Combination pliers Inomic Type long cutting edge, extra Straight shape with grip surfaces serrated. Use holding and cutting. gripping, For 106 56140 Diagonal cutting pliers Inomic Type pattern. Swedish shape, head Halfround Use softFor hard wire. and Type cables, Extra-long cutting and round flat edge for grip surfaces serrated. Use holding and cutting. gripping, For 104 56140 Flat round-nosed pliers Inomic pliers │ Heavy-duty combination pliers combination │ Heavy-duty pliers ® pliers ® Inomic Combination pliers DIN/ISO 5746 DIN/ISO pliers Combination www.hhw.de +49 6204 739-1217 order hotline: Fax 1.8 2.5 2.5 2.8 2.5 3.0 1.6 2.5 - 150 2.2 3.3 - 155 2.0 2.8 4.0 140 56140 56130 - 56138 56130 Length wire Ø up to wire Ø up to Length wire Ø up to wire Ø up to wire Ø up to Weight

mm hard mm medium mm mm hard mm medium mm soft mm g 180 180 160 160 160

200 0 Type handles. dip-coated head, Polished 56132 0 Type handles with chrome-plated, highly polished, Head 2-component handguard. grips with Type mouth. cutter and gas wire With Quality and tempered. Steel C 45, oil-hardened hardened. Cutting edges inductively 56130 + Type handles: Parallel-action +25% power. muscles joints, the Angled shape (23°): protects and tendons. opening spring and locking mechanism. With Use workpiece. the access better to With Quality Pliers head of high-quality steel, corrosion- tool with zinc-nickel resistant surface. jaws Powerful coating. handles made of ductile, plastic with glass fiber and with ergonomic reinforced soft plastic area. Combination pliers │ Inomic pliers Combination 56.2

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:50 Seite 56.2 Seite 09:50 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:50Seite56.3 eng/OP flat workpieces Grip zone for bicolour, non-slipgrips. multi-component Head chrome-plated, handleswith thick-walled, Type 56156 non-slipgrips.multi-component Polished head, handleswith thick-walled, bicolour, Type 56155 Polished head, plastic-coated handles. Type 56152 approx.edges 60HRC. Special tool steel,hardnessofcutting Quality for edges thickLong cables. cutting Type 56152 -56157 : 250 200 160 160 180 190 140 VDE mm piano mm hard mm medium mm mediummm hardmm pianomm mm inductively hardened. Steel C60,oil-hardenedandtempered,edges Quality Approx. thanks to 50%easier cutting new design. Forstress endurance hardest Use 110

Length up to wire Ø up to wire Ø up to wire Ø upto wireØ upto wireØ upto wireØ Length 200 mm piano mm hard mm medium mm mediummm hardmm pianomm mm Length up to wire Ø up to wire Ø up to wire Ø upto wireØ upto wireØ upto wireØ Length 56152 -56158 56172 -56176 2.0 2.5 - - 2.5 2.0 - 2.5 3.8 3.8 2.5 - 3.8 2.5 - 3.1 2.0 - - 1.8 2.8 2.8 1.8 - - 2.2 3.4 3.4 2.2 - . . 2.5 1.6 - 1.5 2.0 - - 2.0 1.5 # = partly extent partly = stock.in 2.2 2.7 3.8 3.8 2.7 2.2 round workpieces Grip zone for Heavy-duty combinationpliersDIN/ISO5746 Combination pliersDIN/ISO5746 (approx. 63HRC). a = Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits. and cables for edges wires Cutting hardness of cutting edges approx.hardness ofcuttingedges HRC. 64 Chrome-vanadium electricsteel, Quality piano wire. for edges thick cables. Alsosuitableforcutting with VDEDINEN60900. Longted inaccordance grips, non-slipmulti-component routine-tes-bicolour Head chrome-plated, handleswith thick-walled, Type 56158 with VDEDINEN60900. ted inaccordance bicolour, non-slipgrips, multi-component routine-tes- Head chrome-plated, handleswith thick-walled, Type 56157 cutting edges. cutting gripswith handguard. With extraergosoft long Head highlypolished, chrome-plated, handleswith Type ß 56176 and gas mouth. gripswith handguard.2-component With wire cutter Head highlypolished, chrome-plated, handleswith Type 0 56175 With wire andgas cutter mouth. Polished head, dip-coated handles. Type 0 56172 56152

104 105 103 102 101 …

56155

104 102 101 …

0 56156 56172 Fax orderhotline: +496204739-1217 www.hhw.de

204 206 203 201 102 … …

0 56157 56175

D VDE

105 103 102 102 … …

ß 56158 56176

56158 56156 56155 56152 56157 56172 56176 56175 102 101 102 56.3 … …

Hand Tools eng/OP … … … 101 102 102 103 201 56180 56182 56185 56184

56187 101 56187 56187 201 56187 56185 56187 56184 #

… … 101 101 102 103 = partly extent in stock. = partly extent #

56187 56182

… 101 102

56180 in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales a VDE IEC on handles directly 60900 sprayed 56187 101 56187 Type fine-polished, forged - Head 2-component with grips - Handles handguard- With 201 56187 Type fine-polished, forged - Head handles (1000 V) in compliance- Insulation with 2-component with grips - Handles handguard. - With shape of handle for good grip and non-tiring work. good grip and non-tiring work. shape of handle for Cutting hardened, edges additionally inductively hardness of cutting edges approx. 64 HRC. Use multi-purpose load, a heavy-duty Solid design for use. Quality oil-hardened. electric steel, forged, Vanadium 56182 Type bicolour, thick-walled, with handles head, Polished multi-component grips. non-slip 56184 Type thick-walled, with handles head, Chrome-plated bicolour multi-component non-slip grips, in compliance with routine-tested VDE DIN EN 60900. Powerful gripping, Powerful pulling and bending high the to thanks compound leverage Crosswise serrated grip serrated Crosswise surfaces good grip for and pulling when building fences EvoLine heavy-duty combination pliers combination heavy-duty EvoLine Heavy-duty combination pliers DIN/ISO 5746, American model pliers DIN/ISO 5746, combination Heavy-duty Heavy-duty combination pliers DIN/ISO 5746 DIN/ISO pliers combination Heavy-duty (approx. 64 HRC). (approx. Long cuttingLong edges for cutting cables flat Inductively hardened Inductively cutting also edges, piano wire. for www.hhw.de +49 6204 739-1217 order hotline: Fax 2.0 2.5 2.2 2.8 2.5 3.0 3.0 4.6 470 3.5 2.5 2.0 56187 56185 56180 - 56184 56180 mm medium mm hard mm piano mm Length wire Ø up to wire Ø up to Weight Length wire Ø up to wire Ø up to

190 mm hard mm medium mm g mm mm piano mm hard 180 VDE VDE 240 Length wire Ø up to wire Ø up to wire Ø up to 200 225 0 Type - Ergonomic head, 25° offset use in all positions - Advantageous joint heavy-duty - Lever-optimised cutting precision edges- Hardened large reach - Slim shape for : Pliers Lineman’s Type bicolour, thick-walled, handles with head, Polished ratio High multi-componentleverage non-slip grips. when required force cutting. 40% lower easy for to pliers thanks standard combination to compared Ergonomically optimised ratio. optimised leverage 35% power savings compared to conventional to compared savings 35% power pliers. combination Quality steel. Special tool 56180 Type handles. plastic-coated head, Polished : Use hardest endurance stress For Grip zone for for Grip zone workpieces round Grip zone below the below Grip zone powerful joint for leveraging Heavy-duty combination pliers │ Flat nosed pliers Flat nosed │ pliers combination Heavy-duty 56.4

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:50 Seite 56.4 Seite 09:50 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:50Seite56.5 eng/OP Special tool steel. Quality Flat, widejaws, serrated. short, gripsurfaces Type : Steel C45,oil-hardenedandtempered. Quality 200 160 160 180 125 140 140 m mm

m mm D VDE Length Length Length Length 56209 -56220 56200 -56205

0 # = partly extent partly = stock.in

56200 56209

204 203 Flat nosepliersDIN/ISO5745 Flat nosepliersDIN/ISO5745 …

0 104 103 102 101 …

When you receive quality ... a 56202 56213

= Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits.

204 …

ted in accordance with VDEDINEN60900. ted inaccordance grips, non-slipmulti-component routine-tes-bicolour Head chrome-plated, handleswith thick-walled, Type 56220 non-slip grips.multi-component Polished head, handleswith thick-walled, bicolour, Type 56218 adjusting applications. Very flat, widejaws, for grippingand perfect Polished head, plastic-coated handles. Type Assembly pliers 56213 Polished head, plastic-coated handles. Type 56209 56203 gripswith handguard.2-component Head highlypolished, chrome-plated, handleswith Type 0 56202 Polished head, dip-coated handles. Type 0 nent non-slipgripswith handguard. 60900 with VDEIEChandles (1000V)incompliance Head highlypolished, chrome-plated, insulation Type 0 56205 gripswith handguard. ergosoft Head highlypolished, chrome-plated, handleswith Type ß 56200

101 …

ß sprayed directly onhandles, with 2-compo- 56203 56218

204 …

www.atorn.de 0 103 102 …

56220 56205 D VDE

201 101 ... then it’s... then ATORN. … … Fax orderhotline: +496204739-1217 www.hhw.de Performance requires quality 56220 56209 56202 56205 56203 56200 56218 56213 jeN 56.5

Hand Tools eng/OP 56240 56248 56242 56244 56263 56252 56256 56254 = partly extent in stock. = partly extent # … … … 101 102 201

VDE 56248 56263 56256

VDE DIN EN 60900. … 101 102 103 0

in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales … 203

56254 grips with handguard. handguard. grips with 56244 sprayed directly on handles, with 2-compo- with on handles, directly sprayed ß

… 101 102 103

56252 Type handles. plastic-coated head, Polished 56254 Type thick-walled, handles with head, Chrome-plated multi-component non-slip grips. bicolour, 56256 Type thick-walled, handles with chrome-plated, Head routine- multi-component non-slip grips, bicolour, in accordance tested with 56240 56248 ß Type handles with chrome-plated, highly polished, Head ergosoft 0 Type insulation chrome-plated, highly polished, Head handles (1000 V) in compliance VDE IEC with 60900 handguard. nent non-slip grips with 0 Type handles. dip-coated head, Polished 56242 0 Type handles with chrome-plated, highly polished, Head 2-component handguard. grips with 56244

… 203

56252 56242 0

… VDE long-nose flat pliers DIN/ISO 5745 Long-nose flat pliers DIN/ISO 5745 Long-nose flat pliers DIN/ISO Long-Nose 5745 DIN/ISO Flat Pliers 201 203

www.hhw.de +49 6204 739-1217 order hotline: Fax

56240

60 0

56263 56240 - 56248 56240 56252 - 56256 Length Length Jaw length Length VDE VDE mm

mm mm mm 140 140 190 180 160 160 Type handles tips serrated, High-gloss chrome-plated, according routine-tested to plastic covering, with 900. IEC VDE 0680/T 201, Quality steel. Vanadium-extra x : Type grip surfaces. serrated jaws, flat Long, Quality electric steel. Chrome-vanadium Quality and tempered. Steel C 45, oil-hardened Long-nose flat pliers │ Flat round-nosed pliers round-nosed │ Flat flat pliers Long-nose 56.6

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:50 Seite 56.6 Seite 09:50 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:50Seite56.7 eng/OP 2-component non-slipgripswith handguard.2-component Head highlypolished, chrome-plated, handleswith Type 0 56286 edges. Without cutting Polished head, dip-coated handles. Type 0 10356284 Polished head, dip-coated handles. Type 0 10156284 inductively hardened. Steel C45,oil-hardenedandtempered,edges Quality serrated,surfaces andgas edge mouth. with cutting jawWith 45°curved tips, flat-round pointed, grip Type non-slipgripswith handguard.2-component Head highlypolished, chrome-plated, handleswith Type 0 56274 edges. Without cutting Polished head, dip-coated handles. Type 0 56271104 Polished head, dip-coated handles. Type 0 56271 101-103 inductively hardened. Steel C45,oil-hardenedandtempered,edges Quality serrated, andgas edge mouth. with cutting With straightjaws, flat-round pointed, gripsurfaces Type 280 200 280 200

160 160 140 mm hard mm medium mm mediummm hard mm mm mm hard mm medium mm mediummm hardmm mm Length up to wire Ø up to wire Ø upto wireØ upto wireØ Length Lnt pt ieØ u owr upto wireØ upto wireØ Length 56284 -56292 56284 56271 -56280 # = partly extent partly = stock.in ------1.6 2.5 1.6 2.5 1.8 2.8 1.6 2.5 1.8 2.8 1.6 2.3 Flat round-nosedpliersDIN/ISO5745 (radiopliers) Flat round-nosedpliersDIN/ISO5745 (radiopliers) a = Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits. with 2-component non-slipgripswithwith handguard. 2-component IEC 60900 non-slipgripswithwith handguard. 2-component IEC 60900 with (1000 V)incompliance chrome-plated, insulation handles Head highlypolished, Type 0 56280 gripswith handguard. ergosoft Head highlypolished, chrome-plated, handleswith Type ß (1000 V) in compliance with (1000 V)incompliance chrome-plated, insulation handles Head highlypolished, Type 0 56292 gripswith handguard. non-slip 2-ergosoft Head highlypolished, chrome-plated, handleswith Type ß 56288 56277 sprayed directly onhandles, sprayed directly onhandles, 0 0 56284 56271

VDE VDE

104 103 103 102 101 101 … …

0 0 56286 56274 56277 56288

Fax orderhotline: +496204739-1217 www.hhw.de 102 103 102 … …

ß ß 56277 56288

102 103 102 101 … …

0 0 56271 101-103 56292 56280 D VDE D VDE 56284 10356284 56284 10156284 56271104

56292 56286 56280 56274 202 201 201 56.7 … …

Hand Tools eng/OP … … 101 100 102 201

56300 100 56300 100 56300 102 56300 101 56294 101 56294 56294 201 56300 56294

… … 101 101 102 103 100 105 106 104 = partly extent in stock. = partly extent #

56296 56294 56296 101 56296 103 56296 102 56296 100 56296 105 56296 104 56296 106 in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales a VDE IEC handles on directly 60900 sprayed 56294 101 56294 Type fine-polished, forged - Head 2-component with grips - Handles handguard- With 56294 201 Type forged fine polished, - Head compliance handles (1000 V) in - Insulation with - Handles 2-component with grips handguard- With mm medium mm hard mm EvoLine power radio pliers radio power EvoLine Flat round-nosed pliers DIN/ISO 5745 (pantograph pliers/radio pliers) pliers/radio (pantograph 5745 Flat round-nosed pliers DIN/ISO www.hhw.de +49 6204 739-1217 order hotline: Fax Pantograph pliers Pantograph 200 73 3.2 2.2 pliers Pantograph 200 73 3.2 2.2 pliers Pantograph 200 73 3.2 2.2 Pantograph pliers Pantograph 200 73 3.2 2.2 pliers Pantograph 200 73 3.2 2.2 pliers Pantograph 200 73 3.2 2.2 Radio pliers 50 160 2.5 1.6 Elastic tips: dimensionally stable tips: Elastic 3.0 2.0 1.4 pointed tips, grip surfaces tips, serrated, pointed 56294 56296 - 56300 Length wire Ø up to wire Ø up to wire Ø up to 40° angled 40° angled 40° angled 40° angled mm medium mm hard mm piano mm VDE VDE 220 mm straight straight straight Shape Length Jaw length wire Ø up to wire Ø up to Type Long jaws, : with wire cutter. flexing. torsional with even Quality oil-hardened. electric steel, forged, Vanadium + 105 56296 101 Type handles. plastic-coated head, Polished + 106 56296 102 Type bicolour, thick-walled, handles with head, Polished multi-component non-slip grips. + 104 + 100 56296 103 Type thick-walled, handles with chrome-plated, Head multi-component non-slip grips. bicolour, 56300 Type thick-walled, handles with chrome-plated, Head bicolour routine-tes- non-slip multi-component grips, in accordanceted VDE DIN EN 60900. with 0 Type head, 25° offset- Ergonomic use in all positions - Advantageous joint heavy-duty - Lever-optimised cutting precision edges- Hardened large reach - Slim shape for Telephone pliers │ Flat round-nosed pliers │ Long flat round-nosed pliers round-nosed flat Long │ pliers round-nosed Flat │ pliers Telephone 56.8

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:50 Seite 56.8 Seite 09:50 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.15 09:50 Seite 56.9

56304 - 56312 Flat round-nosed pliers DIN/ISO 5745 (radio pliers) 56304 56309 : Type Type Head chrome-plated, handles with thick-walled, Tip, flat-round jaws, grip surfaces serrated, bicolour, multi-component non-slip grips. with wire cutters. Use 56312 For soft wire up to Ø 2.5 mm and medium-strength Type 56308 wire up to Ø 1.6 mm. Head chrome-plated, handles with thick-walled, Quality bicolour non-slip multi-component grips, routine- Vanadium electric steel, forged, oil-hardened. tested in accordance with VDE DIN EN 60900.

56304 Type Polished head, plastic-coated handles. 56309 56308 Type Polished head, handles with thick-walled, bicolour, multi-component non-slip grips. Hand Tools 56312 VDE Length 56304 … 56308 … 56309 … 56312 … mm 125 101 140 102 101 102 160 103 102 103 101

56316 Long flat round-nosed pliers DIN/ISO 5745

56316 101 56316 101 : Type Type Polished head, plastic-coated handles. With long, halfround jaws, serrated grip surfaces. 56316 102 Quality Type Chrome-vanadium electric steel. Head chrome-plated, handles with thick-walled, bicolour, multi-component non-slip grips. 56316 102

Length Jaw length 56316 … mm mm 160 50 101 160 50 102

56332 Telephone pliers DIN/ISO 5745

56332 101 56332 101 : Type Type Polished head, plastic-coated handles. Flat-round jaws, cross-hatched grip surfaces, tips particularly slim, without wire cutters. 56332 102 Quality Type Chrome-vanadium electric steel. Head chrome-plated, handles with thick-walled, bicolour, multi-component non-slip grips. 56332 102

Length Jaw length 56332 … mm mm 160 54 101 160 54 102

When you are king ...... your wishes come true.

www.atorn.de Performance requires quality

= Sales are restricted to the packaging units mentioned www.hhw.de eng/OP # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline: +49 6204 739-1217 56.9 56_HHW_Katalog_2015_eng 03.09.15 09:50 Seite 56.10

Round nose pliers │ Long-nose round pliers 56360 - 56368 Round-nose pliers DIN/ISO 5745

Quality 56360 56360 Steel C 45, oil-hardened and tempered. 0 Type Polished head, dip-coated handles.

56362

0 56362 Type Head highly polished, chrome-plated, handles with 2-component non-slips grips with handguard.

56364 ß Type 56364

Hand Tools Head highly polished, chrome-plated, handles with 2-ergosoft non-slips grips with handguard. 056368 Type Head highly polished, chrome-plated, insulation handles (1000 V) in compliance with VDE IEC 56368 60900 sprayed directly on handles, with 2-component non-slip grips with handguard.

0 0 ß 0 VDE Length 56360 … 56362 … 56364 … 56368 … mm 140 # 101 160 102 102 # 102 201

56372 - 56376 Round-nose pliers DIN/ISO 5745

56372 56372 : Type Type Polished head, plastic-coated handles. Short, round jaws, smooth grip surfaces, precision- ground. 56374 Quality Type Chrome-vanadium electric steel, forged, Polished head, handles with thick-walled, bicolour, oil-hardened. multi-component non-slip grips. 56374

56376 Type Head chrome-plated, handles with thick-walled, bicolour non-slip multi-component grips, routine-tested in accordance with VDE DIN EN 60900. 56376

VDE Length 56372 … 56374 … 56376 … mm 160 103 103 103

Performance requires quality. For example, with the diamond grinding wheels and CBN face wheels from ATORN.

UÊ Longest service life with uniformly high stock removal rate UÊ Premium grinding wheels with vibration-damping body UÊ Universal implementation, wet grinding and dry grinding Performance requires quality. www.atorn.de

www.hhw.de = Sales are restricted to the packaging units mentioned 56.10 Fax order hotline: +49 6204 739-1217 a in the catalogue. Purchase orders must be in units. # = partly extent in stock. eng/OP 56_HHW_Katalog_2015_eng 03.09.1509:51Seite56.11 eng/OP grips. with thick-walled, bicolour, multi-component, non-slip Head chrome-plated. Chrome-plated head, handles Long, round jaws, smooth ground. gripsurfaces, Type : Steel C45,oil-hardenedandtempered. Quality 160 160 140 m m mm mm m m mm mm

Length Jaw length Jawlength Length Length Jaw length Jawlength Length 56400 -56406 56400 When you laterally think ... www.atorn.de 56410 # = partly extent partly = stock.in 42 42 47 # 47 1 41 Long-nose roundpliersDIN/ISO5745 Long-nose roundpliersDIN/ISO5745

a = Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits. 56404 56404 gripswith handguard.2-component Head highlypolished, chrome-plated, handleswith Type 0 56402 Polished head, dip-coated handles. Type 0 nent non-slipgrips. 60900 with VDEIEChandles (1000V)incompliance Head highlypolished, chrome-plated, insulation Type 0 56406 gripswith handguard. 2-ergosoft Head highlypolished, chrome-plated, handleswith Type ß Chrome-vanadium electricsteel. Quality 56400 sprayed directly onhandles, with 2-compo- 0 56400

102 101 …

0 56402 ... new ideas arise. arise. ideas ... new

Fax orderhotline: +496204739-1217 www.hhw.de 102 … #

ß 56404 Performance requires quality

102 …

0 56406 56410 D VDE

56404 56406 56402 56400 56410 201 56.11 102 … …

Hand Tools eng/OP 56445 56415 101 56415 56415 102 56415 56425 101 56430 101 56430 102 56425 103 56425 104 = partly extent in stock. = partly extent # … … … … 101 101 101 101 103 102 102 104

56415 56425 56434 56445

… 101 102 in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales

a 56430 Quality electric steel. Chrome-vanadium 56430 Type head. Polished 56434 Type chrome-plated. Head 56425 101 Type grip Cross-hatched straight. jaws, Flat-round handles. plastic-coated head, surfaces. Polished 56425 103 Type grip Cross-hatched straight. jaws, Flat-round thick- handles with surfaces. chrome-plated, Head multi-component non-slip grips. bicolour, walled, 56425 104 Type grip Cross-hatched angled. jaws, Flat-round thick- handles with surfaces. chrome-plated, Head multi-component non-slip grips. bicolour, walled, Quality electric steel. Chrome-vanadium

Needle-Nose Pliers (Duck-Bill Pliers) Needle-Nose Pliers (Duck-Bill Electronic / Precision Mechanic’s Pliers DIN/ISO 9655 Pliers Electronic / Precision Mechanic’s Mechanic's pliers DIN/ISO 5745 Mechanic's pliers Electronic gripping pliers (needlenose pliers) DIN/ISO 57423 DIN/ISO pliers) (needlenose pliers gripping Electronic www.hhw.de +49 6204 739-1217 order hotline: Fax 160 55 160 55 160 200 200 200 125 125 55 56415 56425 56445 56430 - 56434 Length Jaw length

Shape of jaws Length 40° angled 45° angled mm mm flat-round mm 160 mm mm mm straight straight straight Shape Length Shape Length Jaw length flat-wide : Type head, Polished jaws. pointed thin beak-shaped, With grip smooth end, the 1.5 mm at 9mm to width jaw handles. surfaces, plastic-coated : Type grip surfaces, plastic- Smooth tips precision-ground, handles. coated Use gripping and adjusting of components and For hoops. bending of wire Quality electric steel, oil-hardened. Chrome-vanadium : Use highly mechanics all precision applications, For torsion-resistant. Quality electric steel. Vanadium : Type tips 2.5 mm pointed-oval, jaws chrome-plated, Head Grip surfaces height. wide and 1 mm smoothly thick- handles with head, Chrome-plated ground. non-slip grips. multi-component, bicolour, walled, Electronic/mechanic's pliers │ Weaver´s nippers │ Adjustable pliers │ Circlip pliers Circlip │ pliers Adjustable │ nippers │ Weaver´s pliers Electronic/mechanic's 56.12

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:51 Seite 56.12 Seite 09:51 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:51Seite56.13 eng/OP damage to the circlips dueto excessive force. (with plierslength 250mmautomatic) that prevent to external versa. circlip andvice Adjustable stops geable heads, easily can beswitched from internal 3 pliers(length 160,200and 250mm)with exchan- Type x For internal andexternal circlips from 10-50mmØ. Use the pliers. Each head easily can bemounted andquickly onto each with 1x45°and90°). With 4exchangeable heads Type Chrome-vanadium steel. Quality For Seegercirclip rings, internal andexternal. Use 0 Chrome-vanadium electricsteel. Quality ofthe smallestdiameters.gripping components For springsandthin wires. bending contact For Use plastic-coatedhandles. With thin, flat jaws. Polished head andgripsurfaces, Type : 8-piece

mm e otns ye Type Setcontents flat-wide,straight mm mm mm mm 40°curved 4-piece inroll-up case 4-piece for hole Ø (internal) for shafts Ø (external) Type Ø(external) for shafts for holeØ(internal) 8-100 flat-pointed,straight Set contents 56700 101 Size Pointed shape for hole Ø mm for shafts Ømm for shafts for holeØmm Pointed shape Setcontents56700101 Size Set contents 56700 100 Size Pointed shape for hole Ø mm for shafts Ømm for shafts for holeØmm Pointed shape Setcontents56700100 Size

Shape of jaws Length Length Shapeofjaws 1 1 1 1 1 1 1 1 1 1 1 1 External snap ring pliers A 21 90° angled - 19-60 - 90°angled A21 External snapringpliers 10-25 - 90°angled A11 External snapringpliers 19-60 - straight A2 External snapringpliers 10-25 - straight A1 External snapringpliers - 19-60 90°angled J21 Internal snapringpliers - 12-25 90°angled J11 Internal snapringpliers - 19-60 straight J2 Internal snapringpliers - 12-25 straight J1 Internal snapringpliers External snap ring pliers A 21 90° angled - 19-60 - 90°angled A21 External snapringpliers 19-60 - straight A2 External snapringpliers - 19-60 90°angled J21 Internal snapringpliers - 19-60 straight J2 Internal snapringpliers 56450 56700 56710 56715 # = partly extent partly = stock.in i olu ae inroll-up case 135 135 135 135 135 135 3-100 (2 x straight 180°, straight x (2 Circlip pliers Circlip plierssetsDIN5256 PliersDIN5235 Needle-Nosed Circlip pliersset

= Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits. in housing inhousing 56450 56700 56710 56715

203 202 201 100 101 101 101 … … … … Fax orderhotline: +496204739-1217 www.hhw.de 56450 202 56450 56450 203 56450 56450 20156450 56700 10056700 56700 10156700 56710 56715 56.13

Hand Tools eng/OP (1) 56731 56729 56733 56730 56732 = partly extent in stock. = partly extent # … … … 101 101 102 103 102 103 105 104 104 201 202 203 205 204

56733 56729 56732

N … 101 102 103 105 104 in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales

a 56731 :

… 101 102 103 105 104

Use in circlips internal pliers for circlip Precision boreholes. Quality electric Body of pliers: Chrome-vanadium oil-hardened. steel, forged, Inset tips: Spring steel wire, drawn. Quality Body of pliers: Rolled steel, high-strength. steel, rolled, oil-hardened. Tips: Special tool 56733 103-104 Spare tips (pair). 56730 N Type handguard. blue dip-coated with Black lacquered, 0 Type handles. dip-coated head, Polished 56731 : Type handles. plastic-coated head, Polished 56732

56730 0 load capacity Precise, smooth- Precise, Internal snap ring pliers DIN 5256 C Precision circlip pliers for internal circlips in boreholes internal circlips in Precision circlip pliers for Internal snap ring pliers DIN 5256 C 5256 DIN ring pliers snap Internal www.hhw.de +49 6204 739-1217 order hotline: Fax amentised head, plastic-coated amentised head, Spare tips 122 - 300 (pair) tips 122 Spare 8 - 13 140 85 - 140 320 40 - 100 225 Spare tips 252 - 400 (pair) # Spare 12 - 25 12 140 122 - 300 122 19 - 60 19 180 252 - 400 56729 56733 40 - 100 40 - 100 12 - 25 - 25 12 16 19 - 60 22 - 60 19 8 - 13 - 85 - 140 85 - 140 56730 56730 - 56732 Size Application range SG rings Borehole Ø mm

J 2 J 3 J 4 J 0 J 1 Size Application range Size Application range Length Borehole Ø mm -JK Type J 6 J 5 J 6 J 5 J 1 J 2 J 3 J 4 J 0

Borehole Ø mm mm running joint. Slim head for perfect for access Slim head to running joint. workpiece. : 56733 101-102 Type fitting tips, the exchangeable straight, With handling thanks Secure rings. of circlip boreholes of tip via ratchet adjustment clamping width the to principle. Use large inner rings. For : Type Atr straight With tips. Large contactnon-slip handles. surface tips, the at application. easy rings, handling of the torsion-free (1). High work safe tips for inset With Type straight tips. With Use rings. Seeger circlip internal For Quality steel. Chrome-vanadium especially for continuous usage. continuous usage. especially for Internal snap ring pliers snap Internal 56.14

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:51 Seite 56.14 Seite 09:51 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:51Seite56.15 eng/OP For largeinnerrings. Use principle. to the clampingwidth adjustment oftipsviaratchet boreholes ofcirclip rings. Secure handlingthanks With 90°angled, exchangeable the tips, fitting Type 56739 101-102 : les. Precision circlip pliersfor internal circlips inboreho- Use toaccess workpiece. Precise, smooth-running joint. Slimhead for perfect especiallyfor usage. continuous load capacity application. With inset tipsfor safe work (1). the tips, torsion-free handlingofthe rings, easy atcoated surface non-sliphandles. Largecontact With 90°angledtips. A Type : Chrome-vanadium steel. Quality For internal Seegercirclip rings. Use With 90°angledtips. Type J11 J61 J61 J01 J21 J51 J51 J31

J41 oeØm Type JK HoleØmm J11 J01 J21 J31 Size Application range Length Length Applicationrange Size Size Application range Applicationrange Size J41

Borehole Ø mm BoreholeØmm Size Application range SG rings SGrings Applicationrange Size Borehole Ø mm mm mm BoreholeØmm 56735 - 56737- 56735 85 - 140 85 - 140 85-140 85-140 8 - 13 - - 8-13 19 - 60 22 - 60 19 22-60 -60 12 - 25 16 - 25 16 12 -25 -25 40 - 100 40 - 100 40-100 40-100 56739 56738 252-400 12-30 122 -300 Spare # tips252-400(pair) Saetp 2 0 pi) Spare tips122 -300(pair) # = partly extent partly = stock.in 19 - 60 165 165 19 -60 12 - 25 130 130 12 -25 40 - 100 210 210 40-100 85 - 140 305 305 85-140 3 3 130 8-13 tramentised head,tramentised plastic- Internal snapringpliersDIN5256D Precision circlippliersfor internalcirclipsinboreholes Internal snapringpliersDIN5256D a 0 High = Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits. 56736

56737 Polished head, plastic-coated handles. Type : 56735 Polished head, dip-coated handles. Type 0 Black lacquered, with bluedip-coated handguard. Type N Spare tips(pair). 56733 103-104 Tips: Specialtool steel,rolled,oil-hardened. Body ofpliers:Rolledsteel,high-strength. Quality Inset tips:Springsteelwire,drawn. forged, oil-hardened. Body ofpliers:Chrome-vanadium electricsteel, Quality 56736

104 105 103 102 101 …

: 56735

# 104 105 103 102 101 … N

56739 56738 56737

204 205 203 202 201 104 104 103 102 105 103 102 101 101 … … … Fax orderhotline: +496204739-1217 www.hhw.de 56739 56738 56735 56736 56737 56.15 (1)

Hand Tools eng/OP 56745 56742 56746 56743 56744 = partly extent in stock. = partly extent # (1) (2) … … … 101 101 101 102 103 102 103 105 102 103 105 104 104 104

56746 56745 56744

N … 101 102 103 105 104 in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales

a 56742 :

… 101 102 103 105 104

Use rings on shafts. outer pliers for circlip Precision Quality electric steel, Body of pliers: Chrome-vanadium oil-hardened. forged, Inset tips: Spring steel wire, drawn. Quality Body of pliers: Rolled steel, high-strength. steel, rolled, oil-hardened. Tips: Special tool 103-104 56746 Spare tips (pair). 56743 N Type handguard. dip-coated red with Black lacquered, 0 Type handles. dip-coated head, Polished 56742 : Type handles. plastic-coated head, Polished 56744

56743 0 High load capacity External snap ring pliers DIN 5254 A Precision circlip pliers for outer rings on shafts. outer rings Precision circlip pliers for External circlip pliers DIN 5254 DIN pliers circlip External A www.hhw.de +49 6204 739-1217 order hotline: Fax Slim head for perfect for (2). Slim head amentised head, plastic-coated amentised head, Spare tips 122 - 300 (pair) tips 122 Spare 3 - 10 140 85 - 140 320 40 - 100 225 Spare tips 252 - 400 (pair) Spare 122 - 300 122 19 - 60 19 180 10 - 25 10 140 252 - 400 56746 56745 56745 40 - 100 40 - 100 19 - 60 20 - 60 19 10 - 2525 - 10 16 3 - 10 - 85 - 140 85 - 140 56742 - 56744 56742 Size range Application SG rings

Size Application range Size Application range Length A 5 A 6 A 5 A 6 A 0 A 1 A 2 A 3 A 4 Shaft Ø mm mm Shaft Ø mm

A 2 A 3 A 4 A 0 A 1 Shaft Ø mm Type AK Shaft Ø mm Type : 101-102 56746 Type fitting tips, boreho- the exchangeable straight, With the to handling thanks Secure rings. les of circlip of tips via ratchet adjustment clamping width principle. Use rings. large outer For especially for continuous usage. Precise, smooth- Precise, continuous usage. especially for joint, in the Opening spring integrated running joint. becomecan lost not workpiece. accessto : Type Atr straight With tips. Large contactnon-slip handles. surface tips, the at application. easy rings, handling of the torsion-free (1). work safe tips for inset With Type straight tips. With Use rings. Seeger circlip external For Quality steel. Chrome-vanadium External circlip pliers circlip External 56.16

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:51 Seite 56.16 Seite 09:51 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:51Seite56.17 eng/OP For largeouter rings. Use principle. the clampingwidth adjustment oftipsviaratchet boreholes ofcirclip rings. Secure handlingthanks to With 90°angled, exchangeable the tips, fitting Type 56750 101-102 : tohead access for workpiece. perfect integrated inthe joint, not lost can become Precise, smooth-running joint. Openingspring especiallyfor usage. continuous load capacity application. With inset tipsfor safe work (1).High the tips, torsion-free handlingofthe rings, easy atcoated surface non-sliphandles. Largecontact With 90°angledtips. A Type : Chrome-vanadium steel. Quality For external Seegercirclip rings. Use With 90°angledtips. Type A01 A21 A31 A41

A11 A01 A21 A61 A61 Shaft Ø mm Ømm Shaft A31 A51 A51 Shaft Ø mm mm mm Ømm Shaft SatØm Type AK Ømm Shaft A41 A11 Size Application range Applicationrange Size Length Applicationrange Size

Sz Apiainrne S ig SGrings Applicationrange Size 5674756748- 40 - 100 40 - 100 40-100 40-100 85 - 140 85 - 140 85-140 85-140 3 - 10 - 3-10 - 10 - 25 16 - 25 10 16 -25 -25 19 - 60 20 - 60 20-60 19 -60 56750 56749 22-40 252-400 0-2 10 130 10 -25 9-6 15 165 19 -60 12-30 122 -300 Saetp 5 0 pi) Spare tips252-400(pair) 40 - 100 210 210 40-100 8 4 0 305 85-140 0 3 130 3-10 Saetp 2 0 pi) Spare tips122 -300(pair) # = partly extent partly = stock.in tramentised head,tramentised plastic- External circlip pliers DIN 5254 B External circlippliersDIN5254 Precision circlippliersfor outerringsonshafts. B External circlippliersDIN5254 a (2). Slim 0 = Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits. 56747

56748 Polished head, plastic-coated handles. Type : 56747 301-305 Polished head, dip-coated handles. Type 0 Black lacquered, with red dip-coated handguard. Type N Spare tips(pair). 56750 103-104 Tips: Specialtool steel,rolled,oil-hardened. Body ofpliers:Rolledsteel,high-strength. Quality Inset tips:Springsteelwire,drawn. forged, oil-hardened. Body ofpliers:Chrome-vanadium electricsteel, Quality Precision circlip pliersfor outer ringsonshafts. Use 56747 101-105

104 105 103 102 101 …

: 56747

304 305 303 302 301 … N

# 56750 56748 56749

104 104 104 105 103 102 103 102 105 103 102 101 101 101 … … … Fax orderhotline: +496204739-1217 www.hhw.de 56747 301-305 56747 101-105 56750 56749 56748 56.17 (2) (1)

Hand Tools eng/OP … … 101 101 102 103 105 104 56765 56771

56770 101 56764 105 56764 56770 102 56770 100 56764 56771 = partly extent in stock. = partly extent # 56764 104 56764 56764 101-104 101-104 56764 Mounting pliers 105 56764 demounting pliers Mounting and … 101 100 102

Adjustable 56770 V 56764 103 56764

… 101

in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales

a 56765 N opened easily and safely without excessive force excessive without and safely opened easily in confined especially inserts:an tool ideal conditions 70 mm as spring band rings up to clips as well nominal size 40 mm clamping width Use and demounting of CLIC- mounting CLIC R- and For clamps. 56770 101 - Slim head, small head width, rotating grip rotating width, small head - Slim head, and wire space-saving standard, be used for - Can than 80 mm, more - Maximum opening up to jaw Quality electric steel, forged, Chrome-vanadium oil-hardened. jaw opening for differently sized spring band clamps, sized differently opening for jaw Audi. VW, especially for 56770 102 V Type locking device. with jaws, Fixed Use spring band clamps. self-clamping For V Type handles. plastic coated with jaws, Fixed Use self-clamping 12 and 15 mm wide, for Especially spring band clamps in cooling and heating Fiat, Renault, Ford, VW, Opel, e.g. systems, Mercedes- Alfa-Romeo, Porsche, Citroën, Peugeot, Benz. 56764 102 56764 , with handles , with 2

Head straight Hose Clamp Pliers Hose Clamp Pliers Clamp Hose Spring band clip pliers www.hhw.de +49 6204 739-1217 order hotline: Fax Head straight Head Head 45° tilted # Head 45° angled # tilted # Head 15° 0 - 80 250 210 220 320 320 56764 101 56764 Grey atramentized, coated with non- Grey 56764 56771 56765 - 56770 56765 clips in any position clips in any 6-40

Clamping range length Overall 90 80 40 70 mm mm Spring washer Ø washer Spring Jaw opening Length max. mm mm mm Mounting and demounting pliers Mounting pliers Mounting pliers Mounting pliers Mounting pliers Type 200 kg/mm hardness of jaws Forged, made of plastics and opening spring. made of plastics and opening spring. Hose clamps │ Spring band clips │ Snipping │ Waterpump pliers Waterpump │ │ Snipping clips band │ Spring clamps Hose V Type jaws. rotatable Chrome-plated, Use of coolant hoses, e.g. spring band clamps, For Opel. and Audi VW, especially for 56765 N Type chrome-plated. Handles Use hose clamps. self-clamping For 56770 100 : Type clips and spring band rings of A single pliers for position by in any 70 mm. Fits up to sizes different grip inserts. a tight The pliers still guarantee rotating fit on clips. slip plastic. grip inserts grip on a secure universal for - Rotating clips being the with good leverage, - Extremely 56.18

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:51 Seite 56.18 Seite 09:51 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:51Seite56.19 eng/OP For snipping flexible hoseswithout metal lining. Use Plastics. Type oil-hardened. Chrome-vanadium electricsteel,forged, Quality application- Low-effort - No slipping on the workpiece - Self-clamping for pipesandnuts - Easy engagement with machinedswivel plate - 5positions - Jammingprotection with special-hardenedteeth- Gripsurfaces - With adjustablegroove slipjoint Type : PVC-coated handles. Burnished, corrosion-proof. are openingwidth. parallelupto the maximum With slipjoint Type x 2-component non-slipgripswith handguard.2-component Head highlypolished, chrome-plated, handleswith serrated jaws andjammingprotection. 5positions. With adjustablegroove slipjoint, Type 0 Handles with plastic cover andjammingprotection . restThree-point whengrippinground workpieces. relief-milled, chrome-plated andpolished head. With adjustablegroove slipjoint,guidinggrooves Type V 6-19 250 260 240 Length Jaw width Jaw width Jawwidth Jawwidth Length 250 192 mm inch inch mm mm max. mm m mx m max.mm mm mm mm mm mm mm mm for hose-Ø for hose-Ø for hose-Ø for hose-Ø 6-19 /13-32 /19-57 117 19-57 13-32

Length Jaw width Jawwidth Length Length Jaw width Jawwidth Length Lnt Jwwdhsur-n a it on Jawwidthround Jawwidthsquare-end Length m o ie nh frnt Fm for nutsAFmm for pipesinch mm (approx. 61HRC). 56810 -56813 56806 56800 56780 56816 ./6 3 36 1.5/16 # = partly extent partly = stock.in 5 45 32 5 55 50 65 65 50 8 18 and replaceable jointbolt. Thejaws 1/4-3/4/1/2-1.1/4 /3/4-2.1/4 3/4-2.1/4 3/4-2.1/4 1/4-3/4 1/2-1.1/4 mmm Snipping pliers Waterpump pliers(all-purposepliers)DIN/ISO8976 Waterpump pliers(all-purposepliers)DIN/ISO8976 Waterpump pliers(all-purposepliers)DIN/ISO8976 Waterpump pliers(all-purposepliers)DIN/ISO8976 gas mouth, a 56810 = Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits.

Each with 1snippingpliers6-19/13-3219-57mm. 3-piece set, Type 10056780 Chrome-plated head, handleswith thick-walled, - - Head chrome-plated. Type 56813 - Handles with red plastic-coated. - Head chrome-plated. Type 56812 - Handles with red plastic-coated. - Polished head atramentisedBlack - Type 56810 Chrome-vanadium steel. Quality Chrome-vanadium steel. Quality Chrome-vanadium, inductively hardened. Quality 102 bicolour, multi-component, non-slipgrips. …

56812

102 …

56806 56800 56780 56816 56813

104 102 103 102 100 103 103 102 101 101 … … … … … Fax orderhotline: +496204739-1217 www.hhw.de 56780 10256780 56780 10356780 56806 56800 56810 56816 56813 56812 56.19

Hand Tools eng/OP 56817 56819 56821 56824 56825 56822 For nuts up to nuts up to For size 42 mm wrench = partly extent in stock. = partly extent # Fine-tuning per push button: quickly and comfortable … … … … 101 101 102 102 103 202

56817 56819 56824 56825 ES X ® Very slim design in the Very and of head whole area to joint (when compared standard waterpump pliers)

… 102 in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales

with lasered scale from 10 - scale from lasered with a 56822 ß

… 101 102 103

Sliding slip joint Inductively adjustable. 40 mm. Grip surfaces 7-x metal. hold sheet hardened grip surfaces can even plastic- polished, lacquered, Red Self-clamping. coated. Quality High-quality steel. CrV tool 56821 Quality oil-hardened electric steel, Chrome-vanadium and tempered. Type plastic-coated. Handles 56822 ß 56824 X Type hardened handle area, inductively Knurled handles, ground. 0 Perfect access to the access to Perfect for Ideal workpiece. service and maintenan- automotive repair, ce, and industry industry, Quality steel. Chrome-vanadium

56821 0 drop-forged, gas drop-forged, S-jaws waterpump pliers (all-purpose pliers) waterpump S-jaws Waterpump pliers (all-purpose pliers) DIN/ISO 8976 Waterpump Waterpump pliers KNIPEX Cobra pliers KNIPEX Waterpump Waterpump Pliers (all-purpose pliers) DIN/ISO 8976 DIN/ISO pliers) (all-purpose Pliers Waterpump gas mouth, serrated mouth, gas www.hhw.de +49 6204 739-1217 order hotline: Fax

1.1/4 34 19x 1.1/4 40 46 56817 56819 56825 16 6x 32 7x 48 7x 56821 - 56824 56821 Length Jaw width Length Jaw width Length Jaw width Jaw width adjustment Fine

315 Length Jaw width adjustment Fine 160 250 mm max. mm mm pipes inch for nuts AF mm for mm max. mm mm max. mm

240 250 250 X Type pump pliers and pipe wrench in S-grip: Water pipe wrenches! as for - the same torque one tool pipe wren- to compared weight Significantly lower with than adjustment Quicker 820 g! 368 g to ches: Non-slip handles, jaws. and narrower pipe tongs protection. ergonomicsbetter and squeeze Type joint, slip (hole-latch) With box with surfaces grip mouth, hardened teeth, with crushing. against jamming protection Quality steel. Chrome-vanadium : Type pliers. slim) waterpump (extra The ExtraSchlanke very slim workpiece to the access thanks to Perfect Long, and joint. of head whole area design in the One-hand fine-tuning 19 positions with jaws. pointed workpiece the button of a push at means directly by workpiece different perfect to for adaptation allows and a comfortable Secure handle position. sizes locking joint bolt: no unintended in place of the two- joint: high stability to thanks Box adjustment. workpieces of flat hold even Secure guiding. fold pipes for Self-clamping 3-point contact. to thanks low-effort No slipping-offand nuts. workpiece, of the Grip surfacesapplication. especially hardened with 61 HRC: approx. teeth hardness of the teeth, high wear to gripping thanks permanently secure perfect force leverage: Advantageous resistance. crushing prevents transmission. Jamming protection Non-slip handles plastic- head. Polished injuries. coated. J Type slip joint, With adjustable ergonomi- 5 positions, protection. and jamming jaws self- plastic coating, cally red handles with shaped clamping jaws. Waterpump pliers pliers Waterpump 56.20

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:51 Seite 56.20 Seite 09:51 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:51Seite56.21 eng/OP - Routine-tested according to Routine-tested- according - Chrome-plated head, handleswith thick-walled, - Head chrome-plated. Type 56833 201 to Routine-tested- according - Handles dip-insulated with non-slipprotection - Head chrome-plated. Type 56833 101 - Chrome-plated head, handleswith thick-walled, - Head chrome-plated. Type 56832 - Handles with red plastic-coated. - Polished head atramentisedBlack - Type 56830 Chrome-vanadium electricsteel,oil-hardened. Quality - Self-clamping for pipesandnuts - Jammingprotection with special-hardenedteeth- Gripsurfaces - Withbox joint Type : Chrome-vanadium steel(50CrV). Quality Hardened teeth operation. pressure Spring legfor perfect transfer. forsetting any diameter, even duringone-hand With box joint. Type 300 250 400 300 250 250 180 D VDE 175 mm inch mm mm mm g g mm mm mm inch mm mm Inch mm mm Inch mm

Lnt Jwwdhfrpps Jwwdhfrnt W ieajsmn Fine adjustment Jawwidthfor nutsSW Jawwidthfor pipes Length Fine adjustment Weight Jawwidth Gripping depth Jawwidthfor nutsSW Jawwidthfor pipes Length Non-slip gripcovers for asecure hold. bicolour, multi-component, non-slipgrips. bicolour, multi-component, non-slipgrips. (approx. 61HRC). 56830 -56833 56827 ./ 9 1 11x 3.1/2 95 114 3 6 8 1168 11 1.1/4 8 26 30 112 3 2 8 2375 12 1.1/2 8 32 38 2. 46 38 10 14 584 584 14 10 38 46 2. ./ 3 x 9x 1.1/2 36 2. 46 9x 9x 46 2. 9x 46 2. 234 0 9 9x 60 2.3/4 # = partly extent partly = stock.in (51 HRC). Automatic,infinitely adjustable VDE DINEN60900 VDE DINEN60900 Waterpump pliersKNIPEXAligator One-hand waterpump pliers(all-purposepliers)DIN/ISO8976 a = Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits. ® 56830 Fax orderhotline: +496204739-1217 www.hhw.de

103 102 100 101 …

56832

102 100 101 …

56833 56827 56833 201 56832 100 56830 103 56830 102 56830 100 56832 102 56830 101 56833 101 56832 101

56827 56.21 201 103 102 101 101 … …

Hand Tools eng/OP … … 201 201 56837 56835 56834

56845 199 56845 201 56845 200 56845 202 56845 203 56845 205 56845204 56837 56835 56845 301-302

… 201 = partly extent in stock. = partly extent #

56834 … 199 201 301 200 202 203 205 302 204 ®

56845 in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales a Quality steel. Chrome-vanadium 56834 Type handles. dip-coated head, Polished 56835 Type handles with chrome-plated, highly polished, Head 2-component handguard. non-slip grips with sprayed directly on directly sprayed Hightech waterpump pliers KNIPEX Cobra Hightech waterpump VDE waterpump pliers (all-purpose pliers) VDE waterpump Water pump Pliers (all-purpose pliers) DIN/ISO 8976 DIN/ISO pliers) (all-purpose Pliers pump Water www.hhw.de +49 6204 739-1217 order hotline: Fax Optimal force distribution thanks to distribution thanks Optimal force grip surfaces specially harde- with gas mouth and jamming protection. mouth gas gas mouth and jamming protection. and mouth gas

40 1. 27 13x 2.3/4 60 30x 2.3/4 60 30x 2. 46 25x 2. 46 25x 1.1/4 30 11x 30 1.1/4 11x 1.1/2 36 18x 36 18x 1.1/2 3.1/2 95 27x 120 4.1/2 20x ® ® 56837 56845 56834 - 56835 56834 Length pipes Jaw width for nuts AF Jaw width for adjustment Fine Length Length Jaw width

mm inch mm mm mm max. mm

125 150 180 250 250 300 400 560 250 300 250 : Type joint, With box and jamming protection. 61 HRC) (approx. ned teeth of means by fine adjustment Quick and exact workpiece the (adjusta- pushing a button at directly adjustment, one hand),ble with no unintentional on pipes and nuts. self-clamping Quality electric steel, oil-hardened. Chrome-vanadium 56845 199-203 Type non-slip handles. plastic-coated head, Polished 56845 204-205 Type wrench Pipe handles. plastic-coated head, Polished for width Large jaw pliers all in one. and waterpump comparable than pipe pipes and nut and still lighter wrenches. 56845 301-302 Type non-slip plastic coated head, Chrome-plated handles. Speedy Type joint, With box quick adjustment. With handles (1000 V) in insulation chrome-plated, Head 60900 compliance VDE IEC with 2-component with non-slip grips. handles, Waterpump pliers │ Plier wrenches │ Screw pliers Screw │ wrenches Plier │ pliers Waterpump 0 Speedy Type joint, With box on self-clamping positions, 10 finely adjustable pipes and nuts. fine adjustment without One-handed operation, using handles directly on the press of a button the workpiece. special joint disc. Quality steel. Chrome-vanadium 56.22

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:52 Seite 56.22 Seite 09:52 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:52Seite56.23 eng/OP - Fine adjustment: enablesoptimaladjustment to - Openaway from with the proven workpiece push- adjustment at- Quick without the push- workpiece Type : VDE DINEN60900. protection,routine-tested with compliance in workpiece. Handles dip-insulated with non-slip toWith scaling adjustthe griparea away from the Type 56855 302 grip covers. Handles multi-component with bicolour Type 56855 200-202 Handles covered with plastic. Type 56855 099-104 the ratchet principle. tightening andlooseningofscrew using connections strokeallows fast the surfaces between grip industrial, plumbing, auto repair shop,etc. The use,workpieces. Multi-purpose for example, in For gripping, holding, pressing andbending Use sion -highclampingforce. Head nickel-plated. directly onthebutton workpiece.10x force transmis- adjustment by contact. Quick pressingfull-surface a damage to ofsensitive by edges zero-play, fittings With box joint. Type : ofthe handle.the top part adjustment byQuick pressing the at thumb button With slipjointandextremely widejaw opening. Type x

250 400 225 250

125 mm mm inch positions positions inch mm mm max.mm mm m m nh m mm mm/inch mm

Length Working range up to AF Working range up to AF Adjustment Adjustment Working Working upto range AF up to range AF Length Fine adjustment Jawwidth Length Lnt a it o ie a it o usA Adjustment position Jawwidthfor nutsAF Jawwidthfor pipesØ Length position sizesdifferent workpiece anduser-friendly handle function button operation:Simplybutton pushthe tool VDE 250 56846 56848 56855 5 624 46 50/2 250 300 250 180 180 150 150 # = partly extent partly = stock.in 45 11x 11x 45

46 1.3/4 17 1.3/4 46 22 2.3/8 60 17 1.3/4 46 85 3.3/8 25 25 3.3/8 85 23 7/8 11 7/8 23 35 1.3/8 13 1.3/8 35 13 1.3/8 35 46 1.3/4 17 1.3/4 46 27 14 1. 27 14 1. 51 13x 13x 51 Parallel guided, smooth jaws. No VDE hightechwaterpump pliersKNIPEXCobra Plier wrench Waterpump pliers(all-purposepliers)-ERGO- DIN/ISO8976 a = Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits. - Jammingprotection prevents crushinginjuries. - Handles with noticeablly improved arrangementof with slimdesign - Highloadability thanks to- Box highstability two-fold guiding. joint: with special-hardenedteethsecure- Gripsurfaces Self-clamping- for jaw securely geometry gripping dened. Chrome-vanadium electricsteel,forged, oil-har- Quality Chrome-vanadium steel. Quality jaws with clearance. transmission andpain-free working. With straight for asecure grip,highpowernon-slip surface With ergonomic, elastomer-coated handles. Soft, the soft/hard components the soft/hard gripping thanks to highwear resistance. flat, profiles round andmulti-edged 56846 56848 56855 56855 302

302 202 200 099 201 104 104 102 103 102 100 101 101 … … … Fax orderhotline: +496204739-1217 www.hhw.de ®

56855 302 56855 202 56855 200 56855 099 56855

56855 201

56848 104 56848 56855 104 56855 56855 103 56855 102 56855 100 56848 10156848 56855 101 56846 56.23

Hand Tools eng/OP 56870 56880 56885 56862 56858 56875 301-303 56875 ® = partly extent in stock. = partly extent # 56875 301-303 56875 Type wide head. Ribbed handle, 304-305 56875 Type jaws. Wide ground Fully forged. Self-clamping. Double-T profiled Double-T Self-clamping. forged. Fully nut High-quality Undetachable hardened handle. protection. Squeeze and tempered. … … … … 101 101 301 301 302 303 302 303 305 304

56875 56885 56862 56858 X X

… …

101 101 102 103 102 103 105 104 104

in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales

a 56870 56880 0 0 56885 Jamming protection prevents crushing injuries. prevents Jamming protection transport space saving for with lever Locking closed handles. securely Quality forged, electric steel, Chrome-vanadium oil-hardened. 56875 X Type Slim design. dot. yellow the One with The Red polished. lacquered, Red Shape A, 90° angled. Self-clamping. sleeve. reinforced With forged. Fully nut High- Undetachable handle. profiled Double-T protection. Squeeze quality and tempered. hardened Type when even 3-point rest, to hold thanks Secure pipes. smooth with working Slim design. corners. dimensions for Favourable lacquered. Red Shape B, 45° angled. X One-hand adjustment, jamming protection. Polished protection. jamming One-hand adjustment, non-slip handles. plastic-coated head, Use and loosening of tightening holding, gripping, For screws. Quality steel, forged, electric Chrome-vanadium oil-hardened.

Screw pliers Screw Corner pipe wrenches 45° (angle-nose) DIN 5234 shape B Pipe wrench 90° DIN 5234 shape A Pipe wrench 90° DIN 5234 shape Waterpump pliers with automatic adjustment KNIPEX SmartGrip adjustment with automatic pliers Waterpump www.hhw.de +49 6204 739-1217 order hotline: Fax 1/8 - 1.1/4 Fully automated adjustment at the at adjustment automated Fully Special opening actionSpecial opening jaws of the 1.1/2 81 1.1/2 60 1.1/2 1.1/2 60 1.1/2 1.1/2 65 1.1/2 3/4 38 1. 45 1. 55 1. 42 1. 49 10 - 32 10 3/8 - 1.1/4 2. 84 4. 130 2. 94 2. 75 3. 105 4. 140 2. 75 3. 110 56862 56858 56870 - 56875 56870 56880 - 56885 Length Ø pipes up to For Clamping width Length Ø pipes up to For Clamping width Length range Application Application range

10 - 36 10 mm Inch mm mm inch mm mm mm inch 815 mm Inch 310 Application range Application range 760 430 565 580 280 320 320 430 560 685 305 425 250 670 540 445

56880 0 Type opening, hardened jaw inductively 45° angled, varnish. powder-coated red nut, adjustment locked Quality steel. Chrome-vanadium 0 Type opening, jaw hardened inductively 90° angled, positioned teeth profile, handles made of double-T red nut, adjustment locked turning direction, against varnish. powder-coated Quality steel. Chrome-vanadium 56870 : Type joint. With box together. handles the pressing simply by workpiece, One-handed nuts. pipes and for Self-clamping adjust- Precise right and left for handers. operation Grip surfaces special-hardened teeth ment. with 61 HRC). (approx. Waterpump pliers │ Pipe tongs tongs Pipe │ pliers Waterpump : Type joint. With box loosening of screw and quickly tightening for allows to fit thanks Perfect a ratchet. connections like Self-clam- 15 possibilities. with adjustment precise 17 mm. range from the ping on nuts and pipes in 56.24

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:52 Seite 56.24 Seite 09:52 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:52Seite56.25 eng/OP Chrome-vanadium steel. Quality varnish. opening, locked adjustment nut, red powder-coated 3-point pipewrench, inductively hardenedjaw Type -S- 0 56891 device for fingerprotection. screw(2). Setting for fixingthe position. Safety leverage effect. adjustment ofopeningrange Quick Larger application range tooth andcoarser section pitch inouter section. hardened.induction With finetooth pitch ininner angle. Insidepositionedpointed, aggressive teeth Nickel-plated andchrome-plated. Optimisedworking Type x - Integrated jammingprotection to prevent crushing - Highforce transmissionthanks to fullytempered - Highwear resistance through additionalhardened - Nounintended adjustment ofthe handles - Adjustment ofthe openingwidth directly onthe operation- One-handed - Time-saving, precise andquickadjustment Type 440 630 560 550 420 320 320 430 320 325 675 245 245 45 112 0# 1.1/2 0-60 425 mm inch mm mm inch mm mm inch mm mm inch mm m ic m mm inch mm

Length For pipes up to Ø Clampingwidth For pipesupto Ø Length Length For pipes up to Ø Clamping width Clamping width For pipesupto Ø Length Length For pipes up to Ø Clamping width For Clampingwidth pipesupto Ø Length handles gear teeth atworkpiece the press ofabutton 56891 -56895 56898 56910 # = partly extent partly = stock.in 3. 120 120 3. .110 3. 85 2. 70 2. 1. 49 49 1. 42 1. 1. 45 45 1. 1/2 39 39 1/2 35 1/2 1 0-4 # 0-42 1. 1.1/2 68 1.1/2 68 1.1/2 60 1.1/2 60 1.1/2 65 1.1/2 65 (1) allows maximum Pipe tongs -ERGO- DIN5234 Corner pipewrenches(S-jaw) DIN5234shapeC Corner pipewrenches(S-jaw) DIN5234shapeC a = Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits.

- High-quality hardenedandtempered- High-quality - Double-T profiled handle - Inductively hardenedhandlearea - ShapeC, slimmodel pipewrench,- S-jaw red lacquered, polished Type X 56895 directly onthe workpiece Precise adjustment Chrome-vanadium steel. Quality 0 56891

X 104 105 103 102 101 …

of abutton adjustment at the press andpreciseQuick (1) 56895 56898 56910

204 205 203 202 201 100 102 101 101 … … … Fax orderhotline: +496204739-1217 www.hhw.de (2) - Squeeze protection. - Undetachable nut - Self-clamping Fully- forged - Secure even gripwith 3-pointsupport, onsmooth entire working range Secure fitover the pipes (3) through self-clamping applicationLow-effort 56898 56895 56891 56910 56.25

Hand Tools eng/OP … … 102 102 56917 56915 56916 56918 56925 56930 56935

56920 103 56918 56935 56920 101-102

… … 102 102 = partly extent in stock. = partly extent #

56917 56930

… … 101 101 102

56916 56925 0-45 mm

… …

101 101 103 102

mm 0-45

56915 56920 0-45 mm in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales a 0-45 mm 56915 56915 Locking pliers Type jaws. oval With 56916 Locking pliers Type jaws. pointed With 56917 tongs Welding 56918 tongs Welding Type plates. swivel With Automatic size adaptation. No knurled thumbscrew! adaptation. size Automatic Set Locking/welder's gripping pliers gripping Locking/welder's Self-locking pliers www.hhw.de +49 6204 739-1217 order hotline: Fax 0 - 90 76 0 - 32 - 0 - 51 - 35 25 50 30 45 22 56915 - 56918 56915 56920 - 56935 Length Clamping width Length Clamping width Throat depth

110 175 mm mm mm mm mm 150 180 180 275 250 250 250 ß Type nickel-plated, glossy jaws, serrated With pincer action lever, quick-release with Quality steel. made of chrome-vanadium Jaws 56920 self-locking pliers Universal cutter. and wire mouth gas with jaws, Oval Use profiles and flat bars 8 - 40 mm round For 20 mm. up to 56925 self-locking pliers V-notched angled, jaw lower straight, Upper grip jaw good parallel clamping. Use parts. and round flat For 56930 Special self-locking pliers jaw lower angled, Upper grip jaw prismatic. Use sections. and round flat For 56935 self-locking pliers Parallel parallel self-adjusting, movable, jaw Lower section by clamping 0 - 45 mm and any contact. three-point Type control: power clamping SET AND FORGET Locking pliers │ Welder's gripping pliers gripping │ Welder's pliers Locking soft once, - extremely clamping power desired the material of the Independent forget. and then: tight, cam design, the patented the Due to thickness. while workpiece, the to adjusts pliers automatically (The use of same the remains clamping power the One-hand required!). is not a knurled thumbscrew Non-slip and simple release. Safe operation. surface. Quality Chrome-molybdenum steel. 56.26

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:52 Seite 56.26 Seite 09:52 03.09.15 56_HHW_Katalog_2015_eng 56_HHW_Katalog_2015_eng 03.09.1509:52Seite56.27 eng/OP - Aerospatial chrome coating protection for perfect - Knurledhandles clampingcontrol - One-hand - Ergonomicopeningsystem - 4xadjustablejaw opening - Long jaws for largecapacity Type 0 5-x adjustablejaw opening, deepjaw. With jaws with largeclamping range. Type 56941 103 4-x adjustablejaw opening jaws.With short Type 56941 101 resistance. Chrome molybdenumsteelfor increasedwear Quality alwaysparallel. round with smalldiameters. workpieces Jaws are Chrome-plated. Top jaw with groove for clamping Type J Chrome-molybdenum steel,jaws forged. Quality especially suitablefor welding. release thanks to pressure knob. Aluminiumcasing, Clamping andreleasing with onehand. Controlled Use Sheet steel body, serrated jaws. one-block Type T5 Series J Especially suitablefor narrow spaces. Use Nickel-plated. Type Long flat-nosedlockingpliers 56936 250 270 225 250 Length Clamping width Jaw width Weight Weight Jawwidth Clampingwidth Length m m g mm mm mm mm mm mm 240 m m g mm mm 180 115 Length Clamping width Weight Weight Clampingwidth Length Length Clamping width Clampingwidth Length

Length Clamping width Weight ClampingwidthWeight Length mm mm mm g g mm mm mm againstoxidation 56936 -56937 56940 56938 56941 # 30 - 115 - 30 45 80 470 470 80 45 55 - 380 380 - 55 = partly extent partly = stock.in 10 60 650 100 0 40 135 720 135 720 # 135 540 Self-locking plierswithpressureswitch Self-locking pliers Locking pliers with large clampingwidth Locking plierswithlarge clampingwidth Locking plierswithlarge a = Sales are restricted to the packaging unitsmentioned in the catalogue. Purchase ordersmust beinunits. Special steelhandles.(35-45HRc). Chrome-vanadium steeljaws (45-50HRc). Quality Especially suitablefor bendingofsheet metal. Use Nickel-plated. Type Sheet lockingpliers 56937 56936

102 101 …

56940 56938 56937 56941

103 101 101 101 101 … … … … Fax orderhotline: +496204739-1217 www.hhw.de 56941 103 56941 101 56940 56938 56936 56937 56.27

Hand Tools eng/OP 56975 56970 56965 56942 56960 101 56960 102 56960 103 = partly extent in stock. = partly extent # … … … … 101 101 101 101 102 103

56975 56970 56960 56942 C-locking pliers

in the catalogue. Purchase orders must be in units. Purchase catalogue. in the = Sales are restricted to the packaging units mentioned the to restricted are = Sales … 101 102 a

56965 56960 102 Use pipe parts bars. For and round Quality made of high-quality malleable cast iron. Jaws 56960 103 Use bulky workpieces. For Quality steel. made of chrome-vanadium Jaws 56970 C-shaped self-locking pliers Type 40 mm opening (up to jaw widely overlapping With a rail clamping at point and overlapping for per jaw), 110 mm. of up to arallel locking pliers Self-locking pliers Angle locking pliers TUCAN pliers locking Angle Self-locking pipe pliers Welder’s Gripping Pliers Gripping Welder’s www.hhw.de +49 6204 739-1217 order hotline: Fax 45 70 400 65 80 3000 65 4000 65 4000 # 0 - 55 0 - 65 12 - 70 12 56975 56960 56942 56965 - 56970 Clamping width Throat depth Clamping force

Length Clamping widthWeight Jaw angle 0 - 110 280 280 280 100 mm mm 200 210 mm mm mm mm degrees g mm mm max. N P 110 Length Clamping width Clamping width Throat depth $ Type variable, infinitely large clamping range, With of Set all partsparallel-action, nickel-plated. caps included. protection Use objects identical with gripping pipes and round For with clamping jaws The fork-shaped diameters. workpieces the together. centre 2 Vee-notches ß Type and clamping clamping width nickel-plated, Glossy safe thumbscrew, knurled adjustable by force lever. quick-release with gripping of workpieces, 56960 101 Use punches and sections. For Quality of high-quality made malleable cast iron. Jaws Type 200 mm), infinitely large clamping range (up to With All parts jaws. parallel-action serrated, variable, lever. quick-release plastic-coated with nickel-plated, Quality steel, made of chrome-vanadium Jaws hardened. 56965 self-locking pliers Parallel Type small side for a Vee-notch have The parallel jaws parts.round $ Type Nickel-plated. Use spaces. narrow for Perfect Quality high-strength of micro-alloyed, Pliers made steel. made of tempered Jaws special steel. Locking pliers │ Pincers │ Body pliers │ Rabitz pincers Rabitz pliers │ Body │ │ Pincers pliers Locking 56.28

Hand Tools 56_HHW_Katalog_2015_eng 03.09.15 09:52 Seite 56.28 Seite 09:52 03.09.15 56_HHW_Katalog_2015_eng