DOCSLIB.ORG

Fd1500 Incline Brochure

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fd1500 Incline Brochure FD1500 INCLINE LAMELLA CLARIFIER (1500LPH) Introduction Features/Benefits The FD1500 Incline Lamella Tube settler clarifier has a compact, • Compact design for small footprint requirements skid-mounted design that performs a continuous or batch flow • Skid-mounted, factory assembled and tested to chemical precipitation process. ensure trouble-free start up and installation The FD1500 incorporates two chemical process reaction chambers, • PLC controls for low operating costs and safety a flocculation chamber, and an inclined tube separator for solids interlocks separation. • Automatic timed sludge valve – user adjustable The FD1500 has been used in a wide range of applications for • 60° inclined tube settling modules for clarificati on Industrial wastewater treatment. • Epoxy coated frame and web forge FRP flooring • Polyethylene or FRP tank materials of construction Some markets / industries where the FD1500 is commonly used for superior corrosion resistance are: • Weight - Approx Dry 925kg : Operational 6,400kg (Base Model) • Vehicle washes Incl heavy duty truck wash • Designed and manufactured in Australia to ISO9000 • Stormwater / wash down area recovery standards • Small drinking water clarification plants • Petrochemical, Printed circuit board manufacturing DESIGN DATA • Metal finishing/plating Balance Tank Volume 800 Litres • Industrial laundries Working Clarifier 4,500 litres • Landfill leachate / ground water remediation. Volume • Many other applications – contact us to discuss Power usage maximum 600 watts @ 240 v Clarifier Detention 1.5 – 2 Hours Time Why use an incline lamella clarifier over standard Length 3600mm – (With Final Collection Tank fitted 4600mm ) clarifiers? Height 2800mm - (With Mixers 3200mm) Incline Tube settler clarifiers use multiple tubular Width 1300mm channels sloped at an angle of 60° and adjacent to each Dry Weight Approx 925kg other, which combine to form an increased effective Approx 6,400kgs - (With Final Collection tank up to Operational Weight settling area. This provides for a particle settling depth 7,300 kgs) that is significantly less than the settling depth of a conventional clarifier, reducing settling times. Tube settlers capture the settling fine Floc that escapes the clarification zone beneath the tube settlers and allows the larger Floc to travel to the tank bottom in a more solid form. Why Tube Settlers? Tube settlers allow this clarifier to produce output turbidity consistently less than 10 NTU, (Subject to flocculants applied) they can also reduce the tank / footprint required in new installations and reduces the solids loading on downstream filters. Advantages of Tube Settlers Clarifiers equipped with tube settlers can operate at 2 to 4 times the normal rate of standard clarifiers without tube settlers. It is possible to cut coagulant dosage by up to half while maintaining a lower influent turbidity to the treatment plant filters (If used). Less filter backwashing equates to significant operating cost savings for both water and electricity. Unit 2/8 Dual Ave Warana Queensland Australia 4575 | Ph. 617 5 437 8455 | Fax 617 5437 8488 | www.foxenviro.com.au FD1500 INCLINE LAMELLA CLARIFIER (1500LPH) Process Description Waste flow from the facility is collected and sent to the influent balance tank, At times through an oil separator (not included). During times of high flow or equipment maintenance, this tank provides flow equalisation and normalisation. This tank is continuously recirculated via a circulation pump to ensure that the correct pH levels are at the required design set point prior to entry to the first stage. This also allows for high pH adjustment required at times were heavy metal reductions are required The pH corrected waste water is transferred to the first reaction chamber of the FD1500 via a small transfer pump. The first stage reaction chamber is designed as a first stage reaction chamber designed as a stirred tank reactor, it is utilised for flocculation of the solid precipitates, using a low-shear mixer. once mixed the influent gravity flows into the second stage reaction chamber of the FD1500. (Optional mixer is used in special applications for different flocculants) The precipitate from the flocculation chamber flows by gravity into the settling zone chamber. The settling zone chamber is designed as a down flow then up-flow inclined tube style clarifier, which allows gravity settling of the precipitate. The incline chamber is fitted with hexagonal inclined tube modules that provide the settling surface area required and create the laminar flow environment necessary for effective clarification. The precipitate enters the clarifier and settles to the chamber bottom where it is automatically drained via a automated sludge dump valve to a holding tank (by others) The precipitate-free effluent emerges from the top of the clarifier after rising through the tube packs over a set of weirs and flows by gravity to through a visual site flow meter then through to a cleanable bag filter. Effluent from the bag filter is fed into a final tank (optional) and either pumped, via a centrifugal transfer pump (optional) to the next stage of treatment if it is to be used for recycling or directly to sewer, depends upon relevant authority requirements An optional final pH, turbidity or conductivity online analyser can be used to measure and record the effluent water quality in the final tank MODEL ORDER CODE DESCRIPTION FD1500-BM 1500LPH Standard skid mounted system Optional Extras FD1500-LID Outdoor lid for top of clarifier and balance tank – reduces algae growth & odours FD-OT800 800 Litre outlet tank mounted on skid C/W pressure pump on outlet FRRCDS Residual chlorine dosing system – manual only FRRCDSA Residual chlorine dosing System – fully automatic FD-TURB Turbidity monitoring of final effluent water FD-pH pH monitoring of final effluent water FD-SEDBB 2 x 4”x 20” Big Blue Replicable sediment cartridge filters fitted under tank 5 to 50 micron FD-CFBB 2 x 4”x 20” Big Blue Replacable activated carbon cartridge filters fitted under tank (5 Micron) FD-CF16 16”Automatic backwashing activated carbon filter and tank FD-UF Fully automatic ultra filtration system including air scour FD-UV Ultraviolet light with alarms and intensity monitor Unit 2/8 Dual Ave Warana Queensland Australia 4575 | Ph. 617 5 437 8455 | Fax 617 5437 8488 | www.foxenviro.com.au .
Load more

Recommended publications
  • Technical Specification
    TECHNICAL SPECIFICATION The primary purpose of this section is to provide basic data such as the wastewater quantity & quality, and the treatment plant scheme. The rationale behind the selection of treatment system is also presented. The quantity of the combined effluent discharged from the septage is likely to be as indicated in the bid document. This shall be taken as the design capacity of the FSTP in 5KLD. The characteristic of raw effluent from the processing plant is given in bid document. The desired treated effluent characteristics, which the Contractor shall guarantee, are also specified in bid document TABLE OF CONTENT 1. INTRODUCTION .................................................................................................................................. 4 1.1 Project Background ............................................................................................................................ 4 1.2 Project City and City Profile ................................................................................................................ 4 1.3 Existing Sanitation System ................................................................................................................. 4 1.4 Purpose and Outcome of the Project ................................................................................................. 4 2. FECAL SLUDGE TREATMENT PLANT ............................................................................................. 5 2.1 Area Description and Land Availability ..............................................................................................
    [Show full text]
  • Lamella Clarifier
    Lamella Clarifier For 40+ years, Ecodyne has supplied Lamella Clarifiers. Typical Applications The Ecodyne Lamella Clarifier minimizes maintenance and operating • Clarification costs with a compact design requiring significantly less space than • Solids Recovery – Coal or other Material Fines standard clarifiers. The Lamella is ideal in new plants or for • upgrading existing installations where space is limited. The system Cooling Tower Blowdown configuration ensures laminar flow conditions, which result in • Filter Backwash Recovery hydraulic uniformity and high effluent quality. Point-source • Municipal Water Tertiary Treatments treatment with the Lamella is appropriate for many applications. • Landfill Leachate • Brine Treatment Standard Design Features Optional Design Features • Structural steel support legs • Flash mix/flocculation tanks with • Epoxy painted carbon steel tank mixers • Individually removable FRP • Full stainless steel construction plates • Concrete tank designs for large • Adjustable effluent weir plates flows • Standard units can be • Special coatings and plate manufactured for flows from 5 materials available gpm to 3000 gpm and above in • Integral mechanical sludge a single above-grade tank thickener • One-piece prefabricated units • Access platform and ladder are available with up to 1000 sq- • Gasketed and removable covers ft of effective settling area • Automatic desludging • Single tank construction with • Instrumentation and controls integral flash mix/flocculation • Chemical feed equipment compartments for smaller units • Sludge handling and dewatering • Multiple sample connections ecodyne.com Lamella Clarifier Principles of Operation • The settling surface area of each plate is equivalent to its horizontal projection. Stacking the inclined plates results in a separator having up to ten times the settling area of a conventional circular clarifier. • As the feed stream flows upward between each plate chamber, solids settle downward and continue to slide down the plate surface into a collection hopper.
    [Show full text]
  • Graver.Com Lamella Clarifier
    Lamella Clarifier The Graver Lamella Clarifier minimizes maintenance and operating costs with a compact design requiring significantly less space Typical Applications than standard clarifiers. The small footprint allows the Lamella • Well Water Treatment to be installed in- or outdoors and can easily be relocated after • Filter Backwash Recovery/ installation. The Lamella is ideal in new plants or for upgrading Reuse existing installations where space is limited. The system configuration • FGD Purge Streams ensures laminar flow conditions, which result in hydraulic uniformity • Cooling Tower Blowdown and high effluent quality. Point-source treatment with the Lamella is appropriate for many applications. Standard Design Features Optional Design Features • Structural steel support legs • Flash mix/flocculation tanks with mixers • Epoxy painted carbon steel tank • Full FRP or stainless steel construction • Individually removable FRP plates • Concrete tank designs for large flows • Adjustable effluent weir plates • Special coatings and plate materials Water Containing • Standard units can be Floc Particles manufactured for flows from 5 • Integral mechanical sludge thickener Clarified Water gpm to 3000 gpm and above in a • Access platform and ladder Liquid Sludge single above-grade tank Removal • In-house laboratory analysis for • One-piece prefabricated units are equipment optimization available with up to 1,000 sf of effective settling area • Gasketed and removable covers • Single tank construction • Automatic desludging with integral flash mix/floc • Instrumentation and controls compartments for smaller units Typical Flow Entry of Both Sides of • Chemical feed equipment Lamella Plates • Multiple sample connections • Sludge handling and dewatering graver.com Lamella Clarifier Elevation View Plan View Single Row Lamella Double Row Lamella Specifications for Standard Models Shipping Wt Flooded Wt Rated Flash Floc Dim.
    [Show full text]
  • A Buyer's Guide to Potable Water Treatment
    A BUYER’S GUIDE TO POTABLE WATER TREATMENT How to be sure you’re choosing the most effective Settlement and Filtration Lamella Clarification products 2H WATER TECHNOLOGIES 2hwatertechnologies.co.uk Water Management Professionals Effective potable water treatment starts with informed buying decisions. That’s buying decisions plural because potable water treatment is a multi-stage process. To be sure of success, it’s imperative you invest in the most up-to-date and efficient products purpose built for each stage of the treatment process. In this guide, we’ll take you through the factors you need to consider when assessing products for use in settlement, filtration and lamella clarification. Why settle for anything less than the long-term benefits – Process and Financial – Guaranteed by a customised and Cost-effective Solution built from our TUBEdek range of Lamella Separation Tubular Settlers POTABLE WATER TREATMENT: THE BASICS There’s a potentially confusing variety of types, and combinations, of treatment needed to produce water that meets potable standards for domestic or industrial applications. What you do – the stages and treatments required, the products used - largely depends on the provenance of the water. That is, whether the original water comes from an underground or surface source UNDERGROUND Water that has passed through rock in boreholes will be relatively free from plant and other debris that will hinder the functioning of down-stream systems. The flow can be treated by coagulation and flocculation before being passed through sand filters which leave the liquid free of solid material. At this point, the liquid is ready to be passed through a combination of further treatments which can typically include pesticide removal in a granular activated carbon system, pH control, UV disinfection, chlorination and fluidisation.
    [Show full text]
  • Lamella Clarifier
    LAMELLA CLARIFIER Compact, high surface area Lamella Plate Clarifier engineered for most applications in wastewater clarification. OVERVIEW Enviro Concepts Lamella Clarifier is engineered for high flow rate sedimentation and settling of flocculated wastewater streams. These units are pre-engineered, pre-assembled and factory tested ensuring reliable operation and minimising site installation and start-up time. High flow rate sedimentation and settling in a Lamella Clarifier works by having a flocculated liquid/solid stream (e.g. raw wastewater, activated sludge mixed) flow upwards between inclined Lamella Plates. The flocculated solids tumble down to the plate surface by gravity and to a APPLICATIONS sludge collection hopper. The clarified water Wash Bays for Cars and Trucks overflows through a weir that exits the top of Mine Vehicles and Equipment Wash Downs the lamella clarifier. Mechanical and Panel Beating Workshops Industrial Wash Processes Sea Water Desalination FEATURES Storm and Ground Water Treatment Coated Carbon Steel or Stainless 304 and 316 Restaurants and Hotels Anti-corrosion Treatment Grease Trap Waste Treatment uPVC Lamella Plates Food Industry Wastewater Equal Flow Distribution Activated Sludge Systems Consistent Laminar Flow Sludge Thickening Durable and Compact 25 Hutchinson St, Burleigh Heads QLD | PO Box 6664 GCMC QLD 9726 Phone +61 7 5535 9000 | www.enviroconcept.com.au | ABN: 65 612 894 738 SPECIFICATION Feed Water Source Municipal and industrial wastewater; activated sludge mixed liquor Flow Capacity 5 to 80 m³/hr Max. Suspended
    [Show full text]
  • Leopold Texler™ Lamella Clarifier
    Leopold Texler ™ Lamella Clarifier FLEXIBLE DESIGN FOR EASE AND EFFICIENCY The Clear Choice The Leopold Texler lamella clarifier uses a series of inclined lamellas designed to fit in rectangular clarification basins, providing a large settling area within a small footprint. With its efficient removal of solids, the Texler process attains very low turbidity levels and improves the filterability of the water. High efficiency with small footprint Texler provides a large clarification area basin. The numerous lamella sheets are installed at a 55° angle, increasing the water treatment capacity by up to 100% compared to conventional sedimentation systems. Solids settle without blocking the pathway of the water. The unique trough covers Inclined have an integrated v-notch weir design to ensure even flow distribution arrangement increases throughout the length of the clarifier. In this process, solids are reduced by clarification area over 80%, resulting in turbidity levels below 1 NTU. Designed for minimal maintenance Texler’s lamellas are made from a hydrophobic geotextile material, a proven, National Sanitation Foundation (NSF) certified, high-density polyethylene (HDPE) that has been used in the water industry for many years. The repellent and flexible nature of the geotextile prevent sludge accumulation on the lamella sheets, which reduces the need for regular cleaning. The trough covers provide easy access for inspection or service work following local safety protocols. Texler’s unique, yet simple design Geotextile material prevents helps minimize service costs. sludge accumulation Light and flexible for easy installation Texler is cost-efficient to install thanks to its light and modular design. The width of the lamella sheets can be adapted to optimize the effective use of existing basins, and the use of HDPE reduces manufacturing and Sheet sizing installation costs compared to current stainless steel designs.
    [Show full text]
  • Lamella Clarifiers
    LATE ITEM REPORT SUBJECT: Acceptance of Tenders for Contracts C1009A, Taihape Wastewater and C1009B, Water Treatment Plants – Supply of Lamella Clarifiers TO: Rangitikei District Council FROM: Hamish Waugh, General Manager Infrastructure DATE: 17 December 2015 FILE: C1009 1. Purpose of the report The purpose of this report is to recommend acceptance of two tenders from Service Engineers Ltd for the supply of lamella clarifiers for the Taihape wastewater and water treatment plants. 2. Key issues The Taihape Wastewater Treatment Plant currently has a membrane (screen) to remove algae and suspended solids from treated pond effluent before it discharges to the Hautapu River. The presence of algae in the treated effluent is reflective of a healthy treatment pond environment and is no reason for concern. The membrane filters out algae in the wastewater and is backwashed on a regular basis to remove any build up. Operationally this screen has proven to be less than satisfactory because backwashing does not remove all of the accumulated algae and suspended solids. Hand cleaning of the screen is required to remove this material, it is time consuming and the benefits are of short duration. Installing a clarifier to remove the algae and suspended solids from the treated effluent before it passes through the membrane will be a significant process improvement and one that will have significant benefits both operationally and in meeting resource consent conditions. The tender for the wastewater treatment plant also included the supply of a flash mixer and flocculation tank. These are included in the tender price. The existing clarifier at the Taihape Water Treatment Plant is constructed from concrete and removes suspended solids from the raw water as it enters the treatment plant.
    [Show full text]
  • Lamella Plates
    FEATURES AND BENEFITS OF LAMELLA PLATES PRODUCTS AND SERVICES • Proven, reliable performance for different applications Aquatec Maxcon has almost 50 years of experience in treating • 90% less footprint compared to traditional open basin water and wastewater for both municipal and industrial clarifiers applications. • Robust operation • Capable of effectively treating raw water turbidities of several From inception, Aquatec Maxcon has sought to develop high thousand NTU quality market leading technologies better suited to the relatively • Value for money severe Australian conditions. We have spent over 23 million • Capital and Operational cost benefits, including typical 30% dollars on research and development of designs that have been chemical cost savings with effective settlement refined using input from our workshop, field installation crews LAMELLA PLATES • Effective management of raw water turbidity spikes and and operations staff to ensure the production of reliable and fluctuations robust equipment. Together with leading technologies sourced • Minimising wind and thermal stratification disturbances to internationally, this has now become the most comprehensive EFFECTIVE SEDIMENTATION the settled water turbidity range of water and wastewater technology available in Australia. • Flexible design, applicable to existing and new clarifiers and Aquatec Maxcon Pty Ltd is part of the Aquatec Maxcon Group SIMPLE, EFFECTIVE, ROBUST AND LOW MAINTENANCE TECHNOLOGY rectangular or circular basins which provides a vertically integrated range of
    [Show full text]
  • Lamellaclarifier
    NEOTECH WATER LAMELLA CLARIFIER SOLUTIONS LAMELLA CLARIFIER LAMELLA CLARIFIER INTRODUCTION A lamella clarifier or inclined plate settler (IPS) is one type of settler designed to remove Particulates from the water /waste water.They are often employed in primary water treatment in place of conventional settling tanks. They are used in Industrial water treatment. In this type of clarifier series of inclined plates are used. These inclined plates provide a large effective settling area for a small footprint. The inlet stream is stilled upon entry into the clarifier. Solid particles begin to settle on the plates and begin to accumulate in collection hoppers at the bottom of the clarifier unit. The sludge is drawn off at the bottom of the hoppers and the clarified liquid exits the unit at the top over a weir. FEATURES Structural steel support legs 1/4" minimum tank wall thickness. Epoxy painted carbon steel tank Individually removable FRP plates Adjustable effluent weir plates Standard units can be manufactured for flows from 2 to 75 m3 /hr and above, in a single above grade tank PRINCIPLE OF OPERATION The flash mix cum flocculation tank is divided internally into two compartments. Water to be treated is fed into the bottom of the flash/static mix compartment, where it is thoroughly mixed with chemicals. The partition plate dividing the tank allows the water to pass over to the flocculation compartment. In the flocculation compartment, formation of flocs continues and flocculation is completed. Water containing the flocs passes into the Lamella Plate clarifier. The flow is divided after the water enters the Lamella at the lower part of each sedimentation cell, from its opposite sides.
    [Show full text]
  • Discussion Paper
    DISCUSSION PAPER Capital Regional District Core Area Wastewater Management Program Macaulay/McLoughlin Point Wastewater Treatment Plant Discussion Paper – Liquid Process Alternatives Evaluation 034-DP-1 Prepared by: Rosanna Tse and Barry Rabinowitz Issued: September 26, 2008 Previous Issue: None 1 Objective The Core Area Wastewater Management Program consists of four key elements: source control, distributed wastewater treatment, water reuse and resource recovery, and wet weather flow management. Distributed wastewater treatment will include a secondary wastewater treatment plant at Macaulay/McLoughlin Point, two or more decentralized water reclamation plants within the wastewater collection system, and a wet weather flow management strategy that will see surplus wet weather flows managed on a more local basis. Macaulay/McLoughlin Point is the site of the largest proposed wastewater treatment facility. In addition to the two or more distributed water reclamation plants, wet weather facility is proposed at Clover Point. The Path Forward (CRD, 2007) proposed liquid treatment alternatives for the wastewater treatment facility at Macaulay/McLoughlin Point. The objective of this discussion paper is to further evaluate those liquid process alternatives and develop a conceptual liquid-stream footprint requirement. A representative alternative will provide information to determine site development needs and can be refined at a later date with a more detailed analysis of the distributed wastewater treatment strategy. 2 Design Flows and Loads Ultimate flows and loads for the Year 2065 were used to size and evaluate the alternative liquid treatment unit processes. Preliminary and primary treatment would be provided for the 2065 peak wet weather flow (PWWF) of 364 ML/d, assuming a contributing population equivalent (PE) of 400,000.
    [Show full text]
  • Optimization of a Flocculation-Sedimentation
    Optimization of a flocculation-sedimentation Zweckverband treatment plant with lamellas (FLUENT) Landeswasser- versorgung Dipl.-Ing. Marian Brenda Dresden-Rossendorf Backround Information The Zweckverband Landeswasserversorgung provides drinking water for the north-east of Baden-Württemberg and parts of Stuttgart Water delivery 90 Mio m³/a Within the water treatment plant of Langenau raw water from the river Danube is purified Flow diagram of the flocculation-sedimentation Flocculation Aid Lime Milk Clear Water Flocculant Raw Water (Danube) Sludge Pre-Mixer Accelator Overview Capacity 400 to 800 l/s Diameter Accelator: 36 m Height Accelator: 9,5 m Measuring the settling velocity During the settling test the sludge level is measured over the time Within the first minutes linear settling takes place Thereafter hindered settling takes place Within the phase of linear settling the Settling curve concentration and settling velocity is 1000 constant Æ settling velocity for a 900 certain concentration 800 linear settling 700 Relatively easy to measure (standard 600 evel (ml/l) evel 500 hindered test DIN 38 414) 400 settling Sludge l 300 Height of the sludge level after 30 200 Minutes is called sludge volume 100 0 (important parameter in waste water 0 5 10 15 20 25 30 treatment plants) Time (min) Settling velocity depending on concentration Settling velocity depending on concentration 0,003 0,0025 0,002 0,0015 0,001 0,0005 Settling velocity [m/s] 0 01234 Concentratin [g/l] Rheology Non Newton fluid Shear thinning Viscosity depending
    [Show full text]
  • 1/3/14 Turk Pond Treatment System Description Page 1 of 64
    Revision: 1 – 1/3/14 Turk Pond Treatment System Description Page 1 of 64 Revision: 1 – 1/3/14 Turk Pond Treatment System Description Page 2 of 64 Figure 1 - Pond Treatment System Basic Flow Reference Diagram Revision: 1 – 1/3/14 Turk Pond Treatment System Description Page 3 of 64 Turk Pond Water Treatment System Description NOTE: Figure 1 can be referenced to provide an elementary flow path for the Pond Water Treatment System. Additionally the following flow diagrams can be referenced for specific information: Flow Diagram Description 1-51WW001 COAL PILE RUNOFF POND 1-51WW002 PROCESS WATER POND 1-51PW004 POTABLE WATER 1-51SW011 SERVICE WATER 1-51QW010 LAMELLA SETTLERS 1-51QW011 THICKENER, FILTER PRESS 1-51QW012 EFFLUENT TANK, PUMPS 1-51QW013 BACKWASH, RINSE WATER TANK 1-51QW014 BACKWASH AND RINSE PIPING 1-51QW015 MULTI MEDIA FILTERS 1-51QW016 MULTI MEDIA FILTERS 1-51QW017 MULTI MEDIA FILTERS 1-51QW019 FLOCCULENT PUMPS 1. Introduction 1.1. Purpose The coal pile run-off pond (CPRP) and process water pond (PWP) discharge water treatment system is intended to reduce total suspended solids (TSS) to the levels required for discharging to internal outfalls 201 and 101 respectively. This is accomplished through supplemental treatment to achieve the required TSS reductions and simultaneously manage water inventory. The CPRP discharge treatment system consists of coagulation, flocculation, settling through a Lamella clarifier, and finally filtration. The PWP discharge treatment system consists of filtration only. Typical operation of the CPRP is to provide storage (surge) capacity during rain events, such that the treatment system is not overburdened.
    [Show full text]