DOCSLIB.ORG

En 300 468 V1.16.1 (2019-05)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
En 300 468 V1.16.1 (2019-05) Draft ETSI EN 300 468 V1.16.1 (2019-05) EUROPEAN STANDARD Digital Video Broadcasting (DVB); Specification for Service Information (SI) in DVB systems 2 Draft ETSI EN 300 468 V1.16.1 (2019-05) Reference REN/JTC-DVB-376 Keywords broadcasting, digital, DVB, MPEG, service, TV, video ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI deliverable is the one made publicly available in PDF format at www.etsi.org/deliver. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. © ETSI 2019. © European Broadcasting Union 2019. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETM are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the oneM2M Partners. GSM® and the GSM logo are trademarks registered and owned by the GSM Association. ETSI 3 Draft ETSI EN 300 468 V1.16.1 (2019-05) Contents Intellectual Property Rights ................................................................................................................................ 8 Foreword ............................................................................................................................................................. 8 Modal verbs terminology .................................................................................................................................... 9 1 Scope ...................................................................................................................................................... 10 2 References .............................................................................................................................................. 10 2.1 Normative references ....................................................................................................................................... 10 2.2 Informative references ...................................................................................................................................... 13 3 Definition of terms, symbols and abbreviations ..................................................................................... 13 3.1 Terms ................................................................................................................................................................ 13 3.2 Symbols ............................................................................................................................................................ 17 3.3 Abbreviations ................................................................................................................................................... 17 4 Service Information (SI) description ...................................................................................................... 21 5 Service Information (SI) tables .............................................................................................................. 23 5.1 SI table mechanism .......................................................................................................................................... 23 5.1.1 Use of table sections ................................................................................................................................... 23 5.1.2 Mapping of sections into Transport Stream (TS) packets ........................................................................... 24 5.1.3 Coding of PID and table_id fields .............................................................................................................. 25 5.1.4 Repetition rates and random access ............................................................................................................ 26 5.1.5 Scrambling .................................................................................................................................................. 26 5.1.6 Bit order and transmission order ................................................................................................................. 26 5.2 Table definitions ............................................................................................................................................... 28 5.2.0 Introduction................................................................................................................................................. 28 5.2.1 Network Information Table (NIT) .............................................................................................................. 29 5.2.2 Bouquet Association Table (BAT) ............................................................................................................. 30 5.2.3 Service Description Table (SDT) ................................................................................................................ 32 5.2.4 Event Information Table (EIT) ................................................................................................................... 33 5.2.5 Time and Date Table (TDT) ....................................................................................................................... 36 5.2.6 Time Offset Table (TOT) ........................................................................................................................... 36 5.2.7 Running Status Table (RST) ....................................................................................................................... 37 5.2.8 Stuffing Table (ST) ..................................................................................................................................... 38 5.2.9 Discontinuity Information Table (DIT) ...................................................................................................... 38 5.2.10 Selection Information Table (SIT) .............................................................................................................. 38 6 Descriptors ............................................................................................................................................. 38 6.0 Introduction ...................................................................................................................................................... 38 6.1 Descriptor identification and location .............................................................................................................. 38 6.2 Descriptor coding ............................................................................................................................................. 40 6.2.0 General principles ....................................................................................................................................... 40 6.2.1 Adaptation field data descriptor .................................................................................................................. 40 6.2.2 Ancillary data descriptor ............................................................................................................................. 41 6.2.3 Announcement support descriptor .............................................................................................................. 42 6.2.4 Bouquet name descriptor ............................................................................................................................ 44 6.2.5 CA identifier descriptor .............................................................................................................................. 44 6.2.6 Cell frequency link descriptor ..................................................................................................................... 44 6.2.7 Cell list descriptor ....................................................................................................................................... 45 6.2.8 Component descriptor ................................................................................................................................. 46 6.2.9 Content descriptor ......................................................................................................................................
Load more

Recommended publications
  • Cumberland Tech Ref.Book
    Forms Printer 258x/259x Technical Reference DRAFT document - Monday, August 11, 2008 1:59 pm Please note that this is a DRAFT document. More information will be added and a final version will be released at a later date. August 2008 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2008 Lexmark International, Inc. All rights reserved. 740 West New Circle Road Lexington, Kentucky 40550 Draft document Edition: August 2008 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
    [Show full text]
  • IBM Unica Campaign: Administrator's Guide to Remove a Dimension Hierarchy
    IBM Unica Campaign Version 8 Release 6 February, 2013 Administrator's Guide Note Before using this information and the product it supports, read the information in “Notices” on page 385. This edition applies to version 8, release 6, modification 0 of IBM Unica Campaign and to all subsequent releases and modifications until otherwise indicated in new editions. © Copyright IBM Corporation 1998, 2013. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Chapter 1. Administration in IBM Unica To view system table contents .......27 Campaign ..............1 Working with user tables ..........28 Campaign-related administrative tasks in IBM Unica About working with user tables ......28 Marketing ...............1 Guidelines for mapping user tables .....28 To access data sources from within a flowchart 29 Chapter 2. Managing security in IBM Working with user tables while editing a flowchart ..............29 Unica Campaign ...........3 Working with user tables from the Campaign About security policies ...........3 Settings page .............30 The global security policy .........3 Working with data dictionaries ........39 How Campaign evaluates permissions.....4 To open a data dictionary.........39 Using the Owner and Folder Owner roles . 4 To apply changes to a data dictionary ....40 Guidelines for designing security policies....5 When to use a data dictionary .......40 Security scenarios.............5 Data dictionary syntax..........40 Scenario 1: Company with a single division . 5 To manually create a new data dictionary . 40 Scenario 2: Company with multiple separate Working with table catalogs .........41 divisions...............7 To access table catalogs .........41 Scenario 3: Restricted access within a division .
    [Show full text]
  • INCITS Withdrawn Standards and Projects List - Prior to 2015
    INCITS Withdrawn Standards and Projects List - Prior to 2015 Key: Designation: The final standard designation given to the published standard Project: The initial number assigned to new project prior to 2013. Title: Title of the standard Committee: The committee assignment for the project. Designation: -[] Project: 1058 Knowledge Information Format (KIF) Committee: INCITS/DM32.8 Designation: -[] Project: 1059 Conceptual Graphs: A presentation language for knowledge in conceptual models Committee: INCITS/DM32.8 Designation: -[] Project: 106 USA Candidates for Registry Committee: INCITS/L2 Designation: -[] Project: 2113 Cartridge Characterization Standard - Part 4: Ink Cartridge Attributes Committee: INCITS/W1 Designation: -[] Project: 2113 Cartridge Characterization Standard - Part 5: Toner cartridge attributes Committee: INCITS/W1 Designation: -[] Project: 2086 Document Printing Application - Part 1: Abstract Service Definition and Procedures Committee: INCITS/T3 Designation: -[] Project: 2087 Application session service Committee: INCITS/T3 Designation: -[] Project: 1234 Information technology - Database languages - SQL - Part 4: Persistent Stored Modules (SQL/PSM) TECHNICAL CORRIGENDUM 1 Committee: INCITS/DM32.2 Designation: -[] Project: 1234 Information technology - Database languages - SQL - Part 1: Framework (SQL/Framework) TECHNICAL CORRIGENDUM 1 Committee: INCITS/DM32.2 Designation: -[] Project: 2061 Protocol Combinations to Provide and Support the OSI Network Service (Technical Report Type 3) Committee: INCITS/T3 Designation:
    [Show full text]
  • IGP® / VGL Emulation Code V™ Graphics Language Programmer's Reference Manual Line Matrix Series Printers
    IGP® / VGL Emulation Code V™ Graphics Language Programmer’s Reference Manual Line Matrix Series Printers Trademark Acknowledgements IBM and IBM PC are registered trademarks of the International Business Machines Corp. HP and PCL are registered trademarks of Hewlett-Packard Company. IGP, LinePrinter Plus, PSA, and Printronix are registered trademarks of Printronix, LLC. QMS is a registered trademark and Code V is a trademark of Quality Micro Systems, Inc. CSA is a registered certification mark of the Canadian Standards Association. TUV is a registered certification mark of TUV Rheinland of North America, Inc. UL is a registered certification mark of Underwriters Laboratories, Inc. This product uses Intellifont Scalable typefaces and Intellifont technology. Intellifont is a registered trademark of Agfa Division, Miles Incorporated (Agfa). CG Triumvirate are trademarks of Agfa Division, Miles Incorporated (Agfa). CG Times, based on Times New Roman under license from The Monotype Corporation Plc is a product of Agfa. Printronix, LLC. makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, LLC. shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contains proprietary information protected by copyright. No part of this document may be reproduced, copied, translated or incorporated in any other material in any form or by any means, whether manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix, LLC.
    [Show full text]
  • Downloaded Truetype Fonts
    Packet Reference Manual Monarch® 9825® and 9855® Printers TC9800PM Rev DR 10/15 Printer & Fastener Solutions ©1996 Avery Dennison Corp. All rights reserved. Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Avery Dennison Corp. reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Avery Dennison Corp. has made every effort to provide complete and accurate information in this manual, Avery Dennison Corp. shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual. ©1996 Avery Dennison Corp. All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means, without the prior written permission of Avery Dennison Corp. WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CANADIAN D.O.C. WARNING This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.Le présent appareil numérique német pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicte par le ministére des Communications du Canada.
    [Show full text]
  • LANSA Version 11.3
    http://www.lansa.com Newsletter June 2006 LANSA version 11.3 Cumulative Update 3 (CU3) Information CU3 is a cumulative set of changes for a range of LANSA features. It includes software to be installed on an iSeries machine and on a Windows machine. CU3 provides a single install point for all features. So, although the software changes have been grouped for a product feature under an EPC number you do NOT need to directly invoke an EPC install. See the epc77n.htm files for details of the changes delivered. CU3 comprises these individual EPCs: • epc770 - LANSA Communications • epc771 - Visual LANSA • epc772 - LANSA Integrator (only on CU3 install CD) • epc773 - LANSA Web Utilities • epc774 - LANSA Web Server • epc775 - LANSA Open • epc776 - Visual LANSA Frameworks CU3 is distributed by CD-ROM or a Zip File that can be downloaded. LANSA version 11.3 page 1 Compile error RDMLX objecten page 10 In LANSA and V5R4 page 2 PrintScreen functionality in VL page 11 CGIConvMode Setting and L4Web page 3 Crash WAM on HP Notebook page 15 This Advanced Enter key in VL page 4 Cannot start VL on Server PC page 17 VLF Web with IE7 beta page 6 Using the PDFSpoolFileService page 18 Issue VLF demo before CU3 page 7 VLF: What’s new in CU3 page 19 LANSA Newsletter June 2006 page 1 © LANSA 2006 LANSA and V5R4 Description IBM’s latest release of i5/OS, V5R4 was made generally available on February 14th. This version of OS/400 is listed in the V11.0 Supported Platforms document as Confirmed.
    [Show full text]
  • Fonts & Encodings
    Fonts & Encodings Yannis Haralambous To cite this version: Yannis Haralambous. Fonts & Encodings. O’Reilly, 2007, 978-0-596-10242-5. hal-02112942 HAL Id: hal-02112942 https://hal.archives-ouvertes.fr/hal-02112942 Submitted on 27 Apr 2019 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. ,title.25934 Page iii Friday, September 7, 2007 10:44 AM Fonts & Encodings Yannis Haralambous Translated by P. Scott Horne Beijing • Cambridge • Farnham • Köln • Paris • Sebastopol • Taipei • Tokyo ,copyright.24847 Page iv Friday, September 7, 2007 10:32 AM Fonts & Encodings by Yannis Haralambous Copyright © 2007 O’Reilly Media, Inc. All rights reserved. Printed in the United States of America. Published by O’Reilly Media, Inc., 1005 Gravenstein Highway North, Sebastopol, CA 95472. O’Reilly books may be purchased for educational, business, or sales promotional use. Online editions are also available for most titles (safari.oreilly.com). For more information, contact our corporate/institutional sales department: (800) 998-9938 or [email protected]. Printing History: September 2007: First Edition. Nutshell Handbook, the Nutshell Handbook logo, and the O’Reilly logo are registered trademarks of O’Reilly Media, Inc. Fonts & Encodings, the image of an axis deer, and related trade dress are trademarks of O’Reilly Media, Inc.
    [Show full text]
  • Benutzerhandbuch PP 404/PP 405 Mit Allen Kapiteln
    Benutzerhandbuch Endlosdrucker Multifunktionsdrucker Acknowledgements EPSON is a Trademark of Seiko Epson Corporation. IBM is a Trademark of International Business Machines Corporation. Proprinter is a Trademark of International Business Machines Corporation. A Publication of PSi Matrix GmbH Hommeswiese 116c D – 57258 Freudenberg Federal Republic of Germany November 2015 Number: 5112 991 20523 http:\\www.psi-matrix.eu http:\\www.psi-si.de Great care has been taken to ensure that the information in this handbook is accurate and complete. However, should any errors or omissions be discovered or should any user wish to make suggestions for improving this handbook, please feel encouraged to send us the relevant details. The contents of this manual are subject to change without notice. Copyright © by Psi Matrix GmbH. All rights strictly reserved. Reproduction or issue to third parties in any form is not permitted without written authorization from the publisher. Sicherheitsbestimmungen Die Drucker PP 404 (Endlosdrucker) und PP 405 (Multifunktionsdrucker) entsprechen den einschlägigen Sicherheitsbestimmungen nach IEC und VDE für Datenverarbeitungseinrichtungen (EN 60950-1) und den Lärmangaben nach Maschinenlärmverordnung 3. GSGV LpA < 70dB(A) am Arbeitsplatz normaler Betrieb nach EN 27779. Der Drucker ist mit einer sicherheitsgeprüften Netzleitung ausgerüstet und darf nur an eine geerdete Schutzkontaktsteckdose angeschlossen werden. Der eingestellte Netzspannungsbereich muß mit der örtlichen Netzspannung über- einstimmen. Zur vollständigen Trennung vom Spannungsnetz (z. B. bei Instandhaltungs- arbeiten oder bei Gefahr als Not-Aus-Einrichtung) muß die Steckverbindung des Netzkabels leicht zugänglich sein. Zur Trennung von der Netzspannung muß das Gerät durch Ziehen des Netzsteckers spannungslos geschaltet werden. Beim Aufstellen müssen die Umgebungsbedingungen beachtet werden. Auch sollten während Gewitter die Datenübertragungsleitungen weder angeschlossen noch gelöst werden.
    [Show full text]
  • Inputenc.Sty
    inputenc.sty Alan Jeffrey Frank Mittelbach v1.1d 2008/03/30 1 Introduction This package allows the user to specify an input encoding (for example, ASCII, ISO Latin-1 or Macintosh) by saying: \usepackage[encoding name]{inputenc} The encoding can also be selected in the document with: \inputencoding{encoding name} Originally this command was only to be used in vertical mode (with the idea that it should be only within a document when using text from several documents to build up a composite work such as a volume of journal articles. However, usages in certain languages suggested that it might be preferable to allow changing the input encoding at any time, which is what is possible now (though that is quite computing resource intensive). The encodings provided by this package are: • ascii ASCII encoding for the range 32{127 (all others are made invalid, i.e., this really defines a 7-bit encoding). • latin1 ISO Latin-1 encoding. • latin2 ISO Latin-2 encoding. • latin3 ISO Latin-3 encoding. • latin4 ISO Latin-4 encoding. • latin5 ISO Latin-5 encoding. • latin9 ISO Latin-9 encoding. • latin10 ISO Latin-10 encoding. • decmulti DEC Multinational Character Set encoding. • cp850 IBM 850 code page. • cp852 IBM 852 code page. • cp858 IBM 858 code page (this is 850 with Euro symbol). • cp437 IBM 437 code page. • cp437de IBM 437 code page (German version). • cp865 IBM 865 code page. • applemac Macintosh encoding. • macce Macintosh Central European code page. 1 • next Next encoding. • cp1250 Windows 1250 (central and eastern Europe) code page. • cp1252 Windows 1252 (Western Europe) code page.
    [Show full text]
  • Universe NLS User Guide
    Rocket UniVerse NLS Guide Version 11.2.5 July 2015 UNV-1125-NLS-1 Notices Edition Publication date: July 2015 Book number: UNV-1125-NLS-1 Product version: Rocket UniVerse V11.2.5 Copyright © Rocket Software, Inc. or its affiliates 1985-2015. All Rights Reserved. Trademarks Rocket is a registered trademark of Rocket Software, Inc. For a list of Rocket registered trademarks go to: www.rocketsoftware.com/about/legal. All other products or services mentioned in this document may be covered by the trademarks, service marks, or product names of their respective owners. Examples This information might contain examples of data and reports. The examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. License agreement This software and the associated documentation are proprietary and confidential to Rocket Software, Inc. or its affiliates, are furnished under license, and may be used and copied only in accordance with the terms of such license. Note: This product may contain encryption technology. Many countries prohibit or restrict the use, import, or export of encryption technologies, and current use, import, and export regulations should be followed when exporting this product. 2 Corporate information Rocket Software, Inc. develops enterprise infrastructure products in four key areas: storage, networks, and compliance; database servers and tools; business information and analytics; and application development, integration, and modernization. Website: www.rocketsoftware.com Rocket Global Headquarters 77 4th Avenue, Suite 100 Waltham, MA 02451-1468 USA To contact Rocket Software by telephone for any reason, including obtaining pre-sales information and technical support, use one of the following telephone numbers.
    [Show full text]
  • ISO/IEC International Standard ISO/IEC 10646
    ISO/IEC International Standard ISO/IEC 10646 Final Committee Draft Information technology – Universal Coded Character Set (UCS) Technologie de l’information – Jeu universel de caractères codés (JUC) Second edition, 2010 ISO/IEC 10646:2010 (E) Final Committee Draft (FCD) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF- creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. © ISO/IEC 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the ad- dress below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.ch Printed in Switzerland 2 © ISO/IEC 2010 – All rights reserved ISO/IEC 10646:2010 (E) Final Committee Draft (FCD) CONTENTS Foreword.................................................................................................................................................
    [Show full text]
  • Inputenc.Sty
    inputenc.sty Alan Jeffrey Frank Mittelbach v1.1b 2006/05/05 1 Introduction This package allows the user to specify an input encoding (for example, ASCII, ISO Latin-1 or Macintosh) by saying: \usepackage[encoding name]{inputenc} The encoding can also be selected in the document with: \inputencoding{encoding name} Originally this command was only to be used in vertical mode (with the idea that it should be only within a document when using text from several documents to build up a composite work such as a volume of journal articles. However, usages in certain languages suggested that it might be preferable to allow changing the input encoding at any time, which is what is possible now (though that is quite computing resource intensive). The encodings provided by this package are: • ascii ASCII encoding for the range 32{127. • latin1 ISO Latin-1 encoding. • latin2 ISO Latin-2 encoding. • latin3 ISO Latin-3 encoding. • latin4 ISO Latin-4 encoding. • latin5 ISO Latin-5 encoding. • latin9 ISO Latin-9 encoding. • latin10 ISO Latin-10 encoding. • decmulti DEC Multinational Character Set encoding. • cp850 IBM 850 code page. • cp852 IBM 852 code page. • cp858 IBM 858 code page (this is 850 with euro symbol). • cp437 IBM 437 code page. • cp437de IBM 437 code page (German version). • cp865 IBM 865 code page. • applemac Macintosh encoding. • macce Macintosh Central European codepage. • next Next encoding. 1 • cp1250 Windows 1250 (central and eastern Europe) code page. • cp1252 Windows 1252 (Western Europe) code page. • cp1257 Windows 1257 (Baltic) code page. • ansinew Windows 3.1 ANSI encoding, extension of Latin-1 (synonym1 for cp1252).
    [Show full text]