Full-size Single Board Computer Quick Reference Table

Model ACTI-777 ROBO-668 ROBO-678 CPU/Max. Dual III/850MHz Dual Pentium III/850; /533MHz Pentium/933MHz Single Pentium III/850; Celeron/700MHz Celeron/700MHz Front Side Bus 100MHz 66/100MHz 66/100/133MHz Cache Built-in CPU Built-in CPU Built-in CPU Max. Memory RIMMx2/ 2GB DIMMx4/ 1GB DIMMx2/ 512MB Memory Type RDRAM (RAMBUS) SDRAM SDRAM ECC YES YES NO BIOS Award AMI Award Chipset 840 Intel 440BX Intel 815E DiskOnChip Max. 288MB Max. 288MB Max. 288MB PC-104 NO N/A N/A VGA/Panel C&T 69000 / NO C&T 69000 / NO 815E built-in / NO SCSI NO AIC-7892 Ultra 160 Optional AIC-7892 Ultra 160 Optional HDD Channel EIDEx2 EIDEx2 EIDEx2 ATA/100 FDD Drivers 2 2 2 Ethernet 10/100 Base-T 10/100 Base-T Dual 10/100 Base-T USB Port 2 2 2 ATX control YES YES YES On Board I/O W83627HF W83977ATF W83627HF Serial Port 2 2 2 Parallel Port 1 1 1 PS/2 K/B YES YES YES PS/2 Mouse YES YES YES WDT YES YES YES IrDA YES YES YES Dimension (mm) 338.5(L) x 129(W) 339.5(L) x 122(W) 338.5(L) x 122(W)

Model ROBO-698 ROBO-658 ROBO-608 ROBO-598 CPU/Max. Celeron/700MHz Celeron/700MHz Celeron/700MHz P55C/233MHz Pentium III/850MHz Pentium III/850MHz Pentium III/850MHz AMD K6/550MHz Cyrix M1/M2 /450MHz Front Side Bus 66/100MHz 66/100 MHz 66/100MHz 66/100MHz Cache Built-in CPU Built-in CPU Built-in CPU 512KB Pipeline Max. Memory DIMMx4/1GB DIMMx2/512MB DIMMx4/1GB DIMMx3/768MB Memory Type SDRAM SDRAM SDRAM EDO/SDRAM ECC YES NO YES NO BIOS AMI AMI AMI AMI Chipset Intel 82440BX Intel 810e Intel 82440BX ALi M1541/1543C DiskOnChip Max. 288MB Max. 288MB Max. 288MB Max. 288MB PC-104 NO NO YES NO VGA/Panel C&T 69000 / YES GMCH built-in C&T 69000 / YES ATI Rage Pro AGP SCSI NO AIC-7892 Ultra 160 NO NO HDD Channel EIDEx2 EIDEx2 EIDEx2 EIDEx2 DMA33/66 FDD Drivers 2 2 2 2 Ethernet 10/100 Base-T 10/100 Base-T NO NO USB Port 2 2 2 2 ATX control YES YES YES YES On Board I/O W83977ATF W83627HF W83977ATF Built-in Chipset Serial Port 2 2 2 2 Parallel Port 1 1 1 1 PS/2 K/B YES YES YES YES PS/2 Mouse YES YES YES YES WDT YES YES YES YES IrDA YES YES YES YES Dimension (mm) 338.5(L) x 122(W) 338.5(L) x 122(W) 338.5(L) x 122(W) 339.5(L) x 122(W) ACTI-777 The Most Advanced PICMG SBC, Based on Dual Intel ® Pentium ® III Processors with Intel Graphics and Ethernet Solutions (RIMM Memory Supported)

Specifications Additional Functionality ◆ Support dual Socket 370 Pentium® III (FC-PGA) processor with 100MHz FSB CPU Integrated Graphics Controller up to 850MHz ◆ Support one or two Intel® Pentium® III ◆ C&T 69000 Video display chipset processors for the PGA370 Socket ◆ Adopt PCI interface, built-in 2MB VRAM ◆ Support two channel RDRAM memory up to 2GB Chipset ◆ DB15 connector at the rear panel ◆ ® Intel i840 AGPset, including ◆ Support display resolution up to - 82840 memory controller hub (MCH) ◆ Support C&T 69000 chips 1280x1024,256 colors - 82801 I/O controller hub (ICH) - 82802 firmware hub (FWH) Ethernet 10/100 Controller ◆ On board Intel® 82559 10/100 Base-T ◆ Intel® 82559 PCI fast Ethernet controller Ethernet Memory ◆ RJ-45 connector at the rear panel ◆ Two 184-pin RIMM sockets with max. ◆ Support Ultra DMA33/66 IDE mode 2GB capacity ◆ Support IEEE 802.3 auto-negotiation algorithm of full-duplex and half-duplex ◆ PCI Bus spec V2.1 compliant BIOS operation for 10Mb/s and 100Mb/s (NWAY) ◆ Award BIOS-Plug-n-Play compatible DiskOnChip Flash Disk ◆ Full-size all-in-one SBC with PICMG 1.0 On-Board I/O ◆ Rev 2.0 compliant Support M-Systems' flash disk up to ◆ Support two EIDE channels up to four 288MB HDDs (Ultra DMA 33/66) 2S/1P, two ◆ Reserve space around IDE interface US B ports* and one IrDA infrared port System Hardware Monitor connector to fit DOM (Disk-On-Module) ◆ Winbond super I/O is used to monitor Watchdog Timer supply voltages to user programmable ◆ Fully support ATX function with WOL, ◆ Watchdog timeout period programmable voltage levels within 16 mV via S/W from 0.5 to 254.5 sec./min. Modem-Ring On, K/B & Mouse wake-up ◆ Separately monitor up to three fan ◆ Can be enabled/disabled by jumper setting tachometer inputs for rotation speeds ◆ ISA64 driving capability PS/2 Mouse and three temperatures sense via two thermistors circuit ◆ Hardware monitoring and watchdog timer ◆ Routed to 6-pin mini-DIN on rear bracket ◆ Beep alarms for failed fan out, over/under for system protection ◆ Shared 6-pin mini-DIN connector with voltage of DC voltages, and over K/B (Auto-swap) temperature threshold Power Requirement "*" Only one USB port available when ◆ +5V@10A (typ.),+12V@300mA, installed into standard chassis -12V@30mA Ordering Guide Board Dimension ACTI-777 ◆ 338.5(L) x 129(W) mm The most advanced PICMG SBC based ◆ 13.33"(L) x 5.1"(W) on dual Intel® Pentium® III processors ◆ 8-layer PCB with Intel® graphics and Ethernet Operating Temperature solutions (RIMM memory supported) ◆ 0 to +55˚C

Storage Temperature 2 ◆ -20 to +75˚C ROBO-668 Advanced PICMG SBC with On-Board AGP VGA, Fast Ethernet , Based on the Dual Socket 370 Processor

Specifications Additional Functionality ◆ SupportIntel® Pentium® III or Celeron™ processor with 66/100MHZ FSB CPU On board AGP Graphics ◆ One or dual Socket 370 In t e l ® Pe n t i u m ® III ◆ C&T 69000 Video display chipset ◆ Single or dual processors or Celeron™processors up to 850MHZ ◆ Built-in 2MB display Cache ◆ DSUB-15 VGA connector ◆ Support C&T 69000 chips Chipset ◆ Intel® 82440 BX chipset ◆ Support display resolution up to ◆ Intel® 82440BX chipset Memory 1280x1024, 256 colors ◆ Four 168-pin DIMM sockets support up On-board Fast 10/100 Base-T Ethernet ◆ Support up to 1GB of SDRAM memory to 1GB of PC-100 SDRAM ◆ Intel® 82559 PCI fast Ethernet controller with ECC function BIOS ◆ RJ-45 connector at the rear panel ◆ C&T 69000 AGP VGA display with 2MB ◆ AMI system BIOS (256KB flash ROM) ◆ Support IEEE 802.3 auto-negotiation SDRAM algorithm of full-duplex and half-duplex On-Board I/O operation for 10Mb/s and 100Mb/s (NWAY) ◆ On-board Winbond W83977ATF super ◆ ® Intel 82559 Fast Ethernet I/O with two USB ports* Ultra 160 SCSI (Optional) ◆ Adaptec AIC 7892 single channel Ultra ◆ Proprietary PCI connector for expansion Watchdog Timer 160 SCSI controller (optional daughter board provided, such ◆ Watchdog timeout period programmable as Ultra 160 SCSI or fast Ethernet) via S/W from 0.5 to 254.5 sec./min. DiskOnChip Flash Disk ◆ Support M-Systems' DOC up to 288MB PS/2 Keyboard/Mouse ◆ Two EIDE, two serial port, parallel port, ◆ ISA64 ISA-bus Driving Capability two USB ports Single 6-pin mini-DIN Keyboard/mouse connector on rear bracket ◆ Support 64mA high driving capability for ◆ ISA-bus slot on Backplane ◆ Watchdog Timer One additional 5-pin header connector for external keyboard connection through System Hardware Monitor ◆ System hardware monitoring Portwell Backplane ◆ On-board temperature and voltages Power Requirement monitoring ◆ Full-size all-in-one SBC with PICMG 1.0 ◆ +5V@10A,+12V@80mA, -12V@20mA ◆ Beep alarms for failed fan out, over/under Rev 2.0 compliant voltage of DC voltages, and over Board Dimension temperature threshold ◆ Fully PCI Bus spec. V2.1 compliant ◆ 339.5(L) x 122(W) mm ◆ 13.36"(L) x 4.8"(W) ◆ ISA64 driving capability ◆ 8-layer PCB Ordering Guide

Operating Temperature ROBO-668 ◆ 0 to +55˚C "*" Only one USB port available when Advanced PICMG SBC with on-board installed into standard chassis Storage Temperature AGP VGA, Fast Ethernet , based on the ◆ -20 to +75˚C dual Socket 370 processor Relative Humidity ◆ 5% to 95%, non-condensing

3 ROBO-678 High-integrated SBC with Dual Fast Ethernet, Intel® DVMT Display and Ultra 160 SCSI, Based on the Intel® Pentium® III or Celeron™ Processor

Specifications Additional Functionality ◆ SupportIntel® Pentium® III or Celeron™ processor with FSB up to 133MHz, special CPU Integrated Graphics Controller space reserved for high performance ◆ In t e l ® Pe n t i u m ® III or Celeron™processor ◆ Intel® DVMT ( Integrated 3D) ® Pentium III processor for PGA 370 socket ◆ 4MB display cache ◆ Support display resolution up to ◆ Support PC100/133 SDRAM memory up Chipset ◆ Intel® 815E chipset 1600x1200, 256 colors at refresh rates to 512MB (max.) 85Hz Memory ◆ On-board dual 10/100 Base-T Ethernet ◆ Two 168-pin DIMM sockets support up Dual Ethernet 10/100 Controller to 512MB of PC-100/133 SDRAM ◆ Intel® 82559 PCI fast Ethernet controller ◆ and ICH2 embedded MAC controller Integrated 3D graphic controller (DVMT, BIOS 4Mbyte display cache) ◆ Award system BIOS (512KB flash ROM) Ultra 160 SCSI (Optional) ◆ Adaptec AIC 7892 single channel Ultra ◆ On-Board I/O Support two DMA33/66/100 IDE 160 SCSI controller ◆ On-board Winbond W83627HF super ◆ Compliant with PCI Bus spec V2.1 I/O with two USB ports* DiskOnChip Flash Disk ◆ Parallel Port Support M-Systems' DOC up to 288MB ◆ Full-size all-in-one SBC with PICMG 1.0 ◆ Single parallel port controller with ISA64 ISA-bus Driving Capability Rev 2.0 compliant bi-directional capability ◆ Support 64mA high driving capability for ISA-bus slot on Backplane ◆ Proprietary PCI connector for expansion Watchdog Timer (optional daughter board provided, such ◆ Watchdog timeout period programmable System Hardware Monitor as Ultra 160 SCSI or fast Ethernet) via software from 0.5 sec to 254.5 min. ◆ On-board temperature and voltages ◆ Can be enabled/disabled by jumper monitoring ◆ Reserve space around IDE interface Real Time Clock ◆ Beep alarms for failed fan out, over/under connector to fit DOM (Disk-On-Module) ◆ Up to 7 years of battery backup protection voltage of DC voltages, and over temperature threshold and socket 370 for easy installation of ◆ An external Li Battery higher speed processor PS/2 Keyboard/Mouse ◆ Support ATX function with WOL, Modem- ◆ Share PS/2 keyboard 6-pin mini-DIN on Ordering Guide Ring On, K/B & Mouse wake-up rear bracket Power Requirement ROBO-678 ◆ ISA64 driving capability ◆ +5V@7A, +12V@200mA, -12V@20mA High-integrated SBC with dual fast Ethernet, based on the Intel® Pentium® III ◆ Hardware monitoring & Watchdog Timer Board Dimension or Celeron™processor ◆ for system protection 338.5(L) x 122(W) mm ◆ 13.3"(L) x 4.8"(W) ROBO-678N High-integrated SBC with single fast ◆ 6-layer PCB Ethernet, based on the Intel® Pentium® III "*" Only one USB port available when Operating Temperature or Celeron™processor installed into standard chassis ◆ 0 to +55˚C ROBO-678W Storage Temperature High-integrated SBC without fast ◆ -20 to +75˚C Ethernet, based on the Intel® Pentium® III or Celeron™processor Relative Humidity 4 ◆ 5% to 95%, non-condensing ROBO-U160 U160 SCSI Extension Module with Portwell OmniPCI™ Connection Interface

ROBO-U160 is a daughter board for Portwell SBCs with special PCI connection interface. (like ROBO-668, ROBO-678) and more It provides additional high performance SCSI Ultra 160/m function to Single Board Computers. ◆ Adaptec AIC7892 SCSI Ultra 160 SCSI controller This module can be factory optional item or an ◆ Compact sized additional item for customer's order later on. The ◆ Proprietary PCI connector for piggy back (board to board is based on Adaptec AIC 7892 U160/m board) connection SCSI controller. Designed in the most compact ◆ Fully PCI Bus spec. V2.1 compliant form factor makes this board taking minimum ◆ 68-pin SCSI connector located at PCBA component side space upon the SBC. ◆ Support SCSI Ultra160 SCSI All in all, ROBO-U160 is a flexible item for more ◆ Single channel versatile factory configuration or an additional add- ◆ With 68-pin LVDS SCSI cable on module for function extension. ◆ Dimension: 77(L) x 54(W) mm

ROBO-N100 ◆ Intel® 82559 ◆ Compact sized Fast Ethernet Extension Module with ◆ Proprietary PCI connector for piggy back Portwell OmniPCI™ Connection Interface (Board to Board) connection ◆ Fully PCI Bus spec. V2.1 compliant ROBO-N100 is daughter board for Portwell SBCs ◆ One Ethernet RJ-45 cable with special PCI connection interface. (ROBO-668, ◆ Support IEEE 802.3 ROBO-678) It provides additional high ◆ Auto-negotiation algorithm of full-duplex and half- performance fast Ethernet function to Single Board duplex operation for 10Mb/s and 100Mb/s (NWAY) Computers. ◆ Dimension: 77(L)x52(W) mm This module can be factory optional item or an additional item for customer's order later on. The board is based on Intel 82559 fast Ethernet controller. It is designed in the most compact form factor, which makes this board taking the minimum space upon the SBC. All in all, ROBO-N100 is a flexible item for more versatile factory configuration or an additional add- on module for function extension.

5 ROBO-698 High-integrated PICMG AIO SBC, Based on the Intel ® Pe n t i u m ® III or Celeron™ Processor

Specifications Additional Functionality ◆ Intel® 440BX AGPset supports 66/100MHz FSB for Socket 370 SBC type CPU On-board VGA Pentium® III processor up to 850MHz or ◆ Support Intel® Socket 370 type ◆ Intel® C&T 69000 chipset with built-in Celeron™ processors up to 700MHz Pentium® III processor up to 850MHz 2MB SDRAM ◆ Support Intel® Celeron™ processor up ◆ Support display mode up to resolution ◆ On-board AGP VGA with 2MB VRAM to 700MHz 1280x1024 and refresh rate 60Hz inside and 10/100 Base-T Ethernet Chipset ◆ Support TFT/DSTN flat panel or CRT display simultaneously ◆ On-board 4 DIMM sockets support up to ◆ Intel® 82440BX AGPset 1GB of system memory with ECC function Memory On-Board 10/100 Base-T Ethernet ◆ ® ◆ Four 168-pin DIMM sockets support up Built with Intel 82559 Ethernet chip to ◆ Socket 370 type processors are more to 1GB of SDRAM with ECC function support 10/100 Base-T connecting rugged than traditional Pentium® III capability BIOS processors DiskOnChip Flash Disk ◆ AMI system BIOS (256KB flash ROM) ◆ Support M-Systems' flash memory disk ◆ PC '98, PICMG 1.0 Rev 2.0 and PCI V2.1 On-Board I/O industrial standard compliant up to 288MB ◆ On-board Winbond W83977ATF super I/O with two USB ports and one IrDA ISA64 ISA-bus Driving Capability ◆ One DOC socket for booting Windows ◆ infrared port Support 64mA high driving capability for NT directly ISA-bus slot on backplane Watchdog Timer ATX Power Control ◆ Adopt DS1687 RTC to support real ◆ 8 time intervals from 0.5 sec. to 64 sec. ◆ Y2K compliance by jumper setting or 255 intervals from Modem-Ring-On and Wake-On-LAN 0.5 min. to 254.5 min. by software ◆ System monitoring and protection programming Ordering Guide Power Requirement ◆ +5V@6A (typ.),+12V@140mA, ROBO-698 -12V@30mA High-integrated PICMG AIO SBC, based Board Dimension on the Intel® Pentium® III or Celeron™ ◆ 338.5(L) x 122(W) mm processor with VGA display and 10/100 Base-T Ethernet ◆ 13.33"(L) x 4.8"(W) ◆ 6-layer PCB Operating Temperature ◆ 0 to +55˚C Storage Temperature ◆ -20 to +75˚C Connector ◆ Support Mini DIN, 5-pin header & PS/2 type keyboard connector 6 ROBO-658 World's First Fully Integrated SBC with AGP VGA Display, 10/100 Base-T Ethernet and Ultra 160 SCSI Functions

Specifications ◆ The most advanced SBC built with AGP Additional Functionality display, 10/100 Base-T Ethernet and CPU Integrated Graphics Controller Ultra 160 SCSI ◆ Support Intel® Pentium® III processor ◆ 2D graphics display resolution up to up to 850MHz 1600x1200 ◆ Support Socket 370 type Pentium® III up ◆ ® to 850MHz or Celeron™ processors up to Support Intel Celeron™ processor up ◆ Full 2D H/W acceleration, 100MHz 700MHz to 700MHz SDRAM interface Chipset ◆ Support 4MB SDRAM with 3D hyper ◆ Support FSB up to 100MHz ◆ Intel® i810E AGPset pipelined architecture On-Board 10/100 Base-T Ethernet ◆ Memory Support up to 512MB (max.) of SDRAM ◆ ® ◆ Two 168-pin DIMM sockets support up Built with Intel 82559 Ethernet chip to support 10/100 Base-T connecting ◆ Intel® 82559 10/100 Base-T Ethernet to 512MB of SDRAM capability BIOS ◆ On-board Adaptec 7892 Ultra 160 SCSI ◆ AMI system BIOS On-Board Ultra 160 SCSI ◆ Adaptec AIC 7892 SCSI controller to ◆ Support 2D/3D graphics display with On-Board I/O support Ultra 160 SCSI transfer rate up 4 MB SDRAM ◆ Support two EIDE channels up to four to 160MB/s HDDs (Ultra DMA 33/66) 2S/1P, two USB ◆ Ultra DMA33/66 IDE mode and ISA64 ports and one IrDA infrared port DiskOnChip Flash Disk driving capability ◆ Support M-Systems' flash disk up to Watchdog Timer 288MB ◆ Software programmable (0.5, 1.5, 2.5,... ◆ Full-size AIO SBC with PICMG 1.0 Rev ~254.5 seconds and 0.5, 1.5, 2.5, ...... Fully ATX Power Control 2.0 and PCI Bus spec V2.1 compliant ◆ ~254.5 minutes) Modem-Ring-On, K/B & mouse wake-up, WOL and suspend to RAM ◆ Reserve space around IDE interface Power Requirement connector to fit DOM (DiskOnModule) ◆ +5V@6A (typ.),+12V@80mA, -12V@20mA Ordering Guide ◆ Support ATX function with WOL, Modem-Ring On, K/B & Mouse wake-up Board Dimension ◆ 338.5(L) x 122(W) mm ROBO-658 Best performance PICMG AIO SBC with ◆ ◆ 13.33"(L) x 4.8"(W) Support 4MB Video display cache VGA, Ethernet and SCSI, based on the memory ◆ 6-layer PCB Pentium® III or Celeron™ processor

◆ One DOC socket support up to 288MB of Operating Temperature ROBO-658Z flash memory disk ◆ 0 to +55˚C ROBO-658 without SCSI function Storage Temperature ROBO-658W ◆ Hardware monitoring and watchdog ◆ -20 to +75˚C ROBO-658Z without Ethernet function timer for system protection Connector ◆ Support Mini DIN, 5-pin header & PS/2 type keyboard connector 7 ROBO-608 Best Cost/Performance S-370 Type PICMG SBC with PCI VGA/Panel Display

Specifications Additional Functionality ◆ In t e l ® 440BX AGPset support 66/100MHz FSB for Socket 370 Pentium® III processor CPU On-Board PCI VGA Display up to 850MHz or Celeron™ processor ◆ Support Intel® Socket 370 type ◆ Intel® C&T 69000 high performance flat up to 700MHz Pentium® III processor up to 850MHz panel/CRT HiQVideo accelerator with ◆ Celeron™ processor up to 700MHz 2MB integrated memory ◆ Support up to 1GB(max.) of registered ◆ Chipset Support TFT/DSTN flat panel or CRT SDRAM with ECC function display simultaneously ◆ Intel® 82440BX AGPset ◆ DiskOnChip Flash Disk One DOC socket supports up to 288MB Memory ◆ Support M-Systems' flash memory disk of flash memory disk ◆ Four 168-pin DIMM sockets support up up to 288MB to 1GB of SDRAM with ECC function ◆ PC104 connector and high ISA-bus System Monitoring/Protection BIOS driving capability ◆ Auto speeds down when CPU overheats ◆ AMI system BIOS (256KB flash ROM) (OS independent & driverless) ◆ Support C&T 69000 PCI VGA display On-Board I/O with optional panel solution Fully ATX Power Control ◆ On-board Winbond W83977ATF super ◆ Modem-Ring-On and Wake-On-LAN I/O with two USB ports and one IrDA ◆ Adopt DS 1687 RTC to support real Y2K infrared port compliance Watchdog Timer Ordering Guide ◆ Support system overheat protection, real ◆ Eight time intervals from 0.5 sec. to H/W Y2K compliant RTC and ATX power 64 sec. by jumper setting ROBO-608 control ◆ 255 intervals from 0.5min to 254.5min Advanced Socket 370 PICMG SBC with by software programming PCI VGA/panel display Power Requirement ROBO-608V ◆ +5V@6A (typ.),+12V@140mA, Advanced Socket 370 PICMG SBC -12V@30mA without PCI VGA/panel display Board Dimension LCD-KIT-RS ◆ 338.5(L) x 122(W) mm Optional kit for TFT SVGA LCD panel ◆ 13.33"(L) x 4.8"(W) LCD-KIT-RX ◆ 6-layer PCB Optional kit for XGA LCD panel Operating Temperature ◆ 0 to +55˚C Storage Temperature ◆ -20 to +75˚C Connector ◆ Support Mini DIN, 5-pin header & PS/2 type keyboard connector ◆ Support external power connector 8 ◆ Support optional panel display port ROBO-598 Best Performance SBC with AGP Display & Flash Disk, Based on the Pentium ® Pr o c e s s o r

Specifications Additional Functionality ◆ Support Intel® Pentium® III processor up to 550MHz CPU AGP Display ◆ Support Intel® P55C processor up to ◆ Adopt ATI Rage PRO AGP display ◆ Equipped with 512KB cache memory 233MHz chipset with on-board 4/8MB VRAM ◆ AMD K6 processor up to 550MHz ◆ Three DIMM SDRAM sockets support up DiskOnChip Flash Disk to 768MB ◆ Cyrix M1/M2 processor up to 450MHz ◆ Support M-Systems' flash memory disk Chipset up to 288MB ◆ Built-in ATI Rage Pro AGP display and ◆ ALi® M1541/1543C chipset ISA-Bus Driving Capability 4/8MB VRAM for high performance ◆ Enhanced ISA-bus driving capability for display DRAM driving more ISA boards ◆ Three 168-pin DIMM sockets support up ◆ Support high ISA driving capability to 768MB of SDRAM Fully ATX Power Control Cache Memory ◆ Modem-Ring-On and Wake-On-LAN ◆ Support ATX power control and CPU ◆ overheat protection 512KB pipeline burst SRAM, cacheable up to 256MB Ordering Guide ◆ One socket for DiskOnChip supports up BIOS to 288MB flash memory disk ◆ AMI PCI/ISA Pentium BIOS ROBO-598 On-Board I/O Advanced AIO SBC with AGP display and ◆ Built-in RTC and configurable WDT flash disk, based on the Pentium processor (Watchdog Timer) ◆ On-board 2xIDE/FDC/2S/1P, K/B and mouse with two USB ports and one IrDA ◆ 1.8V~3.5V power regulator range infrared port Watchdog Timer ◆ USB ports support ◆ Eight segment (0.5, 1, 2, 4, 8, 16, 32, 64 seconds) hardware time-out intervals Power Requirement ◆ +5V@10A (typ.),+12V@80mA, -12V@30mA Board Dimension ◆ 339.5(L) x 122(W) mm ◆ 13.37"(L) x 4.8"(W) ◆ 6-layer PCB Operating Temperature ◆ 0 to +55˚C Storage Temperature ◆ -20 to +75˚C

9 Relative Humidity ◆ 5 to 95% non-condensing ROBO-615 All-in-one PICMG Half-size PCI Single Board Computer

Specifications Additional Functionality ◆ Support Intel® Pentium® III or Celeron™ Processor CPU On-Board VGA Display ◆ Support Intel® Pentium® III or Celeron™ ◆ Intel 815E GMCH integrated graphic ◆ Intel® 815E chipset support FSB133 processor controller with 4MB display cache

◆ Intel® 815E Direct AGP Graphic with Chipset On-board 10/100 Base-TX Ethernet 4MB display cache ◆ Intel 815E with ICH2 ◆ Intel 82801 BA (ICH2) integrated LAN Memory controller ◆ ◆ Maximum SDRAM memory up to 512MB ◆ one 168-pin DIMM socket Intel 82562ET (one DIMM socket) ◆ Support 3.3V SDRAM up to 512MB System Monitoring/Protection ◆ ◆ Monitor CPU and system temperate, ◆ Support 2 Ultra DMA/33/66/100 IDE 64/128 Mbit DRAM technology opening voltage and fan status channel BIOS ◆ Award BIOS with PC'98 support ◆ Half length all-in-one SBC, PCI bus Interface (PCMCIA) On-Board I/O Ordering Guide ◆ On-board W83627HF super I/O with ◆ Integrated AC-97 2.0 sound blaster two USB, one IrDA Interface ROBO-615 compactible audio ◆ Two Ultra DMA33/66/100 IDE channel Half-sized PCI SBC with VGA/LAN/ Audio based on Pentium® III or Celeron™ ◆ On-board 10/100 Base-TX fast Ethernet Watchdog Timer processor ◆ Support 255 intervals from 0.5sec/min to ◆ Fully support ATX function with WOL, 245.5 sec/min by software programming Modem-Ring On, K/B & Mouse wake-up Power Requirement ◆ +5V@7A (typ.),+12V@200mA, -12V@20mA Board Dimension ◆ 185(L) x 122(W) mm ◆ 7.3"(L) x 4.8"(W) Operating Temperature ◆ 0 to +55˚C Storage Temperature ◆ -20˚C to 75˚C

1 0 ROBO-605 World's First Half-size SBC, Based on the Celeron™ Processor

Specifications ◆ Support Socket 370 processor with Additional Functionality PCI VGA/panel display CPU On-Board PCI VGA Display ◆ Support Intel® Pentium® III or Celeron™ ◆ Intel® C&T 69000 high performance flat ◆ In t e l ® 440BX AGPset supports 66MHz FSB processor panel/CRT HiQVideo accelerator with 2MB integrated memory ◆ Support Intel® Celeron™ processor Chipset ◆ up to 600MHz ◆ Intel® 82440BX AGPset with MMX™ Support TFT/DSTN flat panel or CRT technology and optimized SDRAM display simultaneously ◆ Support Intel® Pentium® III processor ◆ Optional kit for SVGA/ XGA LCD panel up to 850MHz Memory ◆ One 168-pin DIMM socket supports up DiskOnChip Flash Disk ◆ Support M-Systems' flash memory disk ◆ All-in-one half-sized SBC with ISA-bus to 256MB of SDRAM with ECC function up to 288MB BIOS ◆ Support up to 256MB (max.) of 3.3V ◆ AMI system BIOS System Monitoring/Protection SDRAM with ECC function ◆ Auto speeds down when CPU overheats On-Board I/O (OS independent & driverless) ◆ Support M-Systems' flash disk up to ◆ On-board Winbond W83977ATF super 288MB I/O, two USB ports and one IrDA infrared port Ordering Guide ◆ Support C&T 69000 PCI VGA Watchdog Timer display with optional panel solution ◆ Eight segment (0.5, 1, 2, 4, 8, 16, 32, ROBO-605 64 seconds) hardware time-out intervals Half-sized SBC with PCI VGA/panel, ◆ Support system processor overheat based on the Pentium® III or Celeron™ protection and real hardware Y2K Power Requirement processor compliant RTC ◆ [email protected] (typ.),+12V@120mA, -12V@20mA LCD-KIT-RS Optional kit for TFT SVGA LCD panel Board Dimension ◆ 185(L) x 122(W) mm LCD-KIT-RX ◆ 7.3"(L) x 4.8"(W) Optional kit for XGA LCD panel ◆ 8-layer PCB Operating Temperature ◆ 0 to +55˚C Connector ◆ Support Mini DIN, 5-pin header & PS/2 type keyboard connector ◆ Support panel display port

11 ROBO-505 The Most Compact SBC with Panel/VGA Display and 10/100 Base-T Ethernet, Based on the Pentium ® Processor

◆ Support Intel® Pentium® (P55C) Specifications Additional Functionality processor up to 233MHz; compatible CPU On-Board PCI VGA Display processor up to 333MHz ◆ Intel P55C processors up to 233MHz ◆ Intel® C&T 69000 VGA display chipset ◆ with 2MB VRAM ◆ Adopt Intel® 430TX PCI chipset AMD K6 processors up to 333MHz ◆ Cyrix 6x86MX processors up to 333MHz ◆ Support TFT/DSTN flat panel or CRT ◆ One DIMM socket supports up to 128MB display simultaneously Chipset of SDRAM ◆ Support display resolution 1280x1024, ◆ Intel® 82430TX PCI chipset color 8bpp and refresh rate 60Hz ◆ On-board 512KB cache memory Memory DiskOnChip Flash Disk ◆ One on-board 168-pin DIMM socket ◆ Support M-Systems' flash memory disk ◆ Adopt C&T 69000 VGA/panel display supports up to 128MB of SDRAM with 2MB VRAM up to 288MB Cash Memory On-Board 10/100 Base-T Ethernet ◆ ◆ 512KB pipeline burst SRAM Support M-Systems' flash disk up to ◆ Built with Realtek 8139 Ethernet chip to 288MB BIOS support 10/100 Base-T connecting ◆ AMI PCI/ISA Pentium BIOS capability ◆ On-board Realtek 8139A 10/100 Base-T Ethernet On-Board I/O ◆ On-board Winbond W83977ATF super Ordering Guide ◆ Four COM ports supported I/O with two USB ports Watchdog Timer ROBO-505 ◆ 8-layer PCB ◆ Eight segment (0.5, 1, 2, 4, 8, 16, 32, Advanced half-sized AIO SBC with on- board PCI VGA display and 10/100 Base- ◆ 64 seconds) hardware time-out intervals ISA high driving capability and CPU T Ethernet, based on the Pentium® overheat protection supported Power Requirement processor ◆ +5V@5A (typ.),+12V@60mA, -12V@60mA LCD-KIT-RS Optional kit for TFT SVGA LCD panel Board Dimension ◆ 185(L) x 122(W) mm LCD-KIT-RX Optional kit for XGA LCD panel ◆ 7.3"(L) x 4.8"(W) ◆ 8-layer PCB Operating Temperature ◆ 0 to +55˚C Storage Temperature ◆ -40 to +75˚C Relative Humidity ◆ 5 to 95% non-condensing

1 2 ROBO-503 NS GX1 Processor Based 3.5" Embedded SBC with CRT/LCD, Dual Ethernet and Audio

Specifications Additional Functionality ◆ On-board NS Geode GX1 BGA CPUs CPU Flat Panel / VGA Interface ◆ NS Geode CS5530A support CRT and ◆ On-board NS Geode GX1 200/300MHz ◆ NS CX5530 18-bit TFT panels (available in different speeds by special ◆ Shared display memory up to 4MB order) ◆ Simultaneously display CRT and flat ◆ 3.5" FDD SubCompact form factor ◆ BGA package (Capable to support NS panel Geode GXm, GXLV, and GX1) ◆ Support type II compact flash disk Dual Ethernet Interface Chipset ◆ On-board dual Intel 82559ER PCI-bus ◆ Dual Intel® 82559ER 100 Base-TX fast ◆ NS Geode CS5530 Ethernet controllers Ethernet Memory ◆ PCI 100/10 Mbps, IEEE 802.3U ◆ On-board one 144pin SODIMM socket compatible ◆ Integrated AC-97 2.0 sound blaster supports up to 256 MB SDRAM ◆ compatible audio For diskless system BIOS ◆ ◆ 5V only operation Award 256KB FLASH BIOS Ordering Guide On-Board I/O ◆ PC/104 expansion connector ◆ Winbond W83977F-A ROBO-503 ◆ Two RS-232, one Parallel port NS GX1 processor based 3.5" embedded ◆ Two USB ports, one IrDA interface system based with CRT/LCD, dual Ethernet and Audio Watchdog Timer ◆ Generate a system reset, IRQ15 or NMI. ROBO-503N Software selectable time-out interval ROBO-503 with single Ethernet (16 sec. ~ 7666 sec., 30 sec./step) Power Requirement ◆ [email protected] w/GX1 200MHz Board Dimension ◆ 150(L) x 100(W) mm (3.5" FDD-size) ◆ 5.9"(L) x 3.94"(W) Operating Temperature ◆ 0 to +55˚C Storage Temperature ◆ -40 to +75˚C Relative Humidity ◆ 5 to 95% non-condensing

1 3 PICMG Backplane 6/8/14/19 Slot PCi/ISA Bus PICMG Backplane Series

What's Active PBP-08A7 PBP-14A7 Ba c k p l a n e ? 8-Slot (7xPCI) Active PICMG Backplane 14-Slot (7xPCI) Active PICMG Backplane To support more PCI slots (such as 7, 12 and 18 slots), we adopt the most popular PCI bridge chipset from Intel to extend PCI slots. Tr a d i t i o n a l Backplanes only allow passive components to be put on the Backplanes. To meet this demand, we put the active chipset on the Backplanes. Therefore, they will be no longer called "Passive Backplanes" but "Active Backplanes".

PBP-14AC PBP-19AC PBP-19AI

14-Slot (12xPCI) Active PICMG Backplane 19-Slot (12xPCI) Active PICMG Backplane 19-Slot (18xPCI) Active PICMG Backplane

PBP-06P3 PBP-08P3 PBP-08P4

6-Slot (3xPCI) PICMG Backplane 8-Slot (3xPCI) PICMG Backplane 8-Slot (4xPCI) PICMG Backplane

PS. All our 20-slot Backplanes are built with dual power connectors. 1 4 PICMG Backplane 2/6/13/14/18/19/20 Slot PCI/ISA Bus PICMG Backplane Series

◆ 4-layer PCB with ground and power PBP-13D4 PBP-13R4 planes to reduce noise and keep lower impedance 13-Slot Dual-System Backplane 13-Slot (4xPCI) PICMG Backplane ◆ Frame rated PCB at 94-V0 ◆ Support ATX type and 3.3V power connector ◆ LED indicator for power signal status ◆ Reserve terminal block connector for wiring ◆ Equipped with gold-plated connector for better contact ◆ Adopt Tantalum capacitors to keep circuit signal more reliable and stable ◆ No PCB bent after soldering

PBP-14P4 PBP-18D4 PBP-19P4

14-Slot (4xPCI) PICMG Backplane 18-Slot Dual-System Backplane 19-Slot (4xPCI) PICMG Backplane

PBP-20Q3 PBP-06V4 PBP-02V1X

20-Slot Quad-System Backplane Vertical 6-Slot (4xPCI) PICMG Vertical 2-Slot (1xPCI) PICMG Backplane Backplane

▲ Front View ▼ Rear View ▲ Front View ▼ Rear View

1 5 PS. All our 20-slot Backplanes are built with dual power connectors. ISA Backplane 3/4/6/8/14/20 Slot ISA Bus Passive Backplane Series

◆ 4-layer PCB with ground and power planes for reducing noise PBP-06V and keeping lower impedance Horizontal 6-Slot ISA Passive Backplane ◆ Frame Rated PCB at 94-V0 ◆ LED power indicator for +5V,+12V,-5V and -12V ◆ Heavy duty terminal block connector for industrial power supply wiring(*) ◆ Equipped with gold-plated socket for good contact ◆ Tantalum capacitor on board to maintain reliable and stable quality ◆ Easy cut for dual or multi system(*) ◆ Plug-in sockets of termination resistors for high speed signal.(*) "*" means for most part of products

PBP-03I PBP-04I 3-Slot ISA Passive Backplane 4-Slot ISA Passive Backplane

PBP-06I PBP-08I 6-Slot ISA Passive Backplane 8-Slot ISA Passive Backplane

PBP-14I PBP-20I 14-Slot ISA Passive Backplane 20-Slot ISA Passive Backplane

1 6 ACTI Backplane 14/18/19 Slot PCI/ISA Bus ACTI Backplane Series ACTI-14AA ACTI-14P4 14 -Slot (10xPCI) PICMG Backplane 14-Slot (4xPCI) PICMG Backplane

◆ 3rd generation design of ACTI-Backplane ◆ 3rd generation design of ACTI-Backplane ◆ Enhanced PCB thickness to prevent bending ◆ Enhanced PCB thickness to prevent bending ◆ As many as 10 PCI slots to meet the demand of today's ◆ As many as 9 ISA slots capable of handling multiple CTI applications bus applications ◆ More PICMG CPU slots to fit versatile SBC boards ◆ More PICMG CPU slots to fit versatile SBC boards ◆ Specially designed capacitor which lowers the ESR ◆ Specially designed capacitor which lowers the ESR and prevents explosion and prevents explosion ◆ Well-designed power ensures sufficient power is ◆ Well-designed power ensures sufficient power is delivered to every slot delivered to every slot

ACTI-18AH ACTI-19A7 18-Slot (17xPCI) PICMG Backplane 19-Slot (7xPCI) PICMG Backplane

◆ 3rd generation design of ACTI-Backplane ◆ 3rd generation design of ACTI-Backplane ◆ Enhanced PCB thickness to prevent bending ◆ Enhanced PCB thickness to prevent bending ◆ Support 17 PCI slots for new CTI application ◆ Support 11 ISA slots for the legend bus application ◆ More PICMG CPU slots to fit versatile SBC boards ◆ More PICMG CPU slots to fit versatile SBC boards ◆ Specially designed capacitor which lowers the ESR ◆ Specially designed capacitor which lowers the ESR and prevents explosion and prevents explosion ◆ Well-designed power ensures sufficient power is ◆ Well-designed power ensures sufficient power is delivered to every slot delivered to every slot

1 7 * All brand names and trademarks are the properties of their respective owners. * Specifications are subject to change without notice. EZDRV-300/200N 5.25" Compact Drive Set with Notebook Type CD-ROM, FDD & HDD

◆ All-in-one drive set can hold notebook type CD-ROM, FDD and HDD drives within the standard 5.25" drive bay

◆ A replaceable drive cover provides more flexibility to install any device

◆ Reserve one LED for internal HDD

◆ The DVD-ROM version available for ▲ EZDRV-300NCF special order

E Z D RV-300/200N is an intelligent drive Specifications set that can hold notebook type CD- ROM/FDD/HDD drive or one 3.5" FDD General drive within the standard 5.25" drive bay. Construction Heavy-duty steel with plastic front cover Adoptin g EZDRV-300/200N, its compact Disk Drive Housing External: 1x NB CD-ROM+1xNB FDD (or 1x3.5"FDD) and rugged design helps to integrate Internal: 1x NB 2.5" HDD (300NCF/300CF) your system more flexibly in drive space Drive Cover One NB CD-ROM front cover limited applications since the newest One NB FDD front cover computers need to install more disks or One 3.5" FDD side cover a disk array. EZDRV-200NC can hold Indicator LED indicators for HDD and power On/Off notebook type CD-ROM and one 3.5" Switch One reset and one ON/OFF (only for EZDRV-300CF) HDD. EZDRV-200NF can hold notebook Switch Protection Cap One ON/OFF switch protection cap type FDD and one 3.5" HDD. (only for EZDRV-300CF) Standard Color Black Ordering Guide Dimension 149(W) x 185(D) x 43(H) mm 5.9"(W) x 7.3"(D) x 1.7"(H) EZDRV-300CF Weight Net: 1.5kg.(3.3lb) 5.25" intelligent drive bracket with On/Off Gross: 2kg.(4.8lb) switch and a switch protection cap EZDRV-300NCF Environment 5.25" compact drive bracket for notebook Operating Temperature 0 to +55˚C type CD-ROM, FDD & HDD Storage Temperature 0 to +70˚C EZDRV-200NC (CD-ROM) 5.25" intelligent drive bracket with Relative Humidity 5 to 95% non-condensing notebook type 24X CD-ROM EZDRV-200NF (FDD) 5.25" compact drive bracket for notebook type FDD

▲ EZDRV-300CF ▲ EZDRV-200NC ▲ EZDRV-200NF (Slim type CD-ROM, FDD & (Slim type CD-ROM, FDD & (Slim type FDD & drive 1 8 drive bay for 2.5" HDD) drive bay for 3.5" HDD) bay for 3.5" HDD) PRC-1173 Super Slim 19" 1U Industrial Rack-mount PC Chassis

◆ 19" rack-mount chassis meets EIA RS-310C industrial standard

◆ The slimmest design for Internet application

◆ Power On/Off switch on the rear side and a reset switch inside the lockable door

◆ Four cooling fans generate positive air for better ventilation

◆ Easily-to-install drive bracket with shock- resistant cushion design

◆ Special Backplane design for one PCI or ISA slot

P R C - 1173 is a super slim 19" 1U rack-mount chassis The space inside a cabinet is more valuable than before designed for space limited applications, especially in the as the Internet business is booming lately. As an 1U Internet colocation applications. Its rugged, sturdy, full- chassis, a super slim system for the application, PRC- sealed steel chassis and well-concerned ventilation are 1173 saves much more space than the traditional 4U designed to withstand shocks, dust, humidity, trembling chassis. vibration and high operating temperature in the harsh To overcome the space limitation problem, PRC-11 7 3 environment. integrates CD-ROM, FDD and HDD together inside the Designed as a user-concerned product, PRC-1173 is rack. Only of 1U in height, PRC-1173 has all the equipped with an optional PCI or ISA slot for expansion. It necessary functionality as a 2U or 4U system. holds one more PCI add-on card than any other legacy design to offer the best flexibility and meet customers' demands.

General Speaker Input Current One 8W speaker 40A max./115V, 2A max./230V Construction Heavy-duty steel with aluminum front Standard Color Efficiency panel Beige, black Min. 60% Air Filter Dimension MTBF Reliability One replaceable air filter 482.6(W) x 438(D) x 44(H) mm Min. 50,000 hours at 25˚C (70˚F) 19"(W) x 17.2"(D) x 1.7"(H) Cooling Fan Safety Four 4cm ball-bearing cooling fans Weight UL/TUV/CUL/CE/FCC Net: 8.5kg (18.7lb) Disk Drive Housing Gross: 9.5kg (20.9lb) Environment Special bracket and converting board to hold notebook type CD-ROM, FDD and Backplane Operating Temperature Range HDD together inside a 5.25" drive bay Support 2-slot (1xPICMG, 1xPCI or ISA) +10 to +50˚C

Indicator Power Supply Storage Temperature Range LED indicators for HDD and power -20 to +60˚C On/Off Output Voltage & Current +5V@10A, +12V@6A, Relative Humidity Switch [email protected], -12V@1A 5 to 95% non-condensing One for reset and one for power On/Off with a protection cap Input Voltage AC 95 - 135V, 180 - 265V AC Auto- Keyboard Connector range Standard 6-pin PS/2 K/B connectors at the front panel Input Frequency 47Hz - 63Hz

1 9 PRC-1173 Super Slim 19" 1U Rack-mount PC Chassis

Features Benefits ◆ Meet EIA RS-310C standard ◆ Easy to fit in different 19" rack-mount cabinet ◆ Replaceable air filter ◆ For easy cleaning ◆ Four 4cm ball-bearing cooling fans ◆ Better ventilation to enhance system reliability ◆ Smart design of 3 in 1 drive kit ◆ FDD, HDD & CD-ROM only take 5.25" drive space ◆ Equipped with a front door ◆ Better security control for the system ◆ One PCI or ISA expansion slot available ◆ New legacy cards adoptable ◆ Customized 150W power supply ◆ Provide sufficient power source to the system

What's New

Smart 3 in 1 drive kit Well-designed cooling system Flexible design for slot expansion A smart design to integrate CD-ROM, FDD With four 4cm cooling fans to expire heat, The unique design can hold the PCI or ISA and HDD into a 5.25" drive bay. PRC-1173 gives higher reliability. add-on card without modification needed.

Ordering Guide Engineering Drawing

PRC-1173-02V1-15A Super slim 19" 1U rack-mount PC chassis with 1-slot PCI or 1-slot ISA BP and 150W Auto-range PSU PRC-1173-02V1X-15AX Super slim 19" 1U rack-mount PC chassis with 1-slot PCI or 1-slot ISA BP and 150W Auto-range ATX PSU PRC-1173-02V1X-25S Super slim 19" 1U rack-mount PC chassis with 1-slot PCI or 1-slot ISA BP and 250W Auto-range ATX PSU

▲ PRC-1173 in beige

2 0 PRC-2193/PRC-2193P Advanced 19" 2U Industrial Rack-mount PC Chassis

◆ 19" rack-mount chassis meets EIA RS-310C industrial standard

◆ Rugged construction and design for harsh industrial environment

◆ Power On/Off switch with LED indicator and a reset switch inside the lockable door

◆ Two cooling fans generate positive air for better ventilation

◆ Easily installed drive bracket with shock- resistant cushion and well-conductive rubber

◆ Special design for 4 full-length cards

PRC-2193 is a 19" 2U rack-mount chassis designed for structure, you can have 4 PCI slots for expansion and 2 space limited applications, especially in the Internet PCI slots for ATX motherboard structure. environment. Its rugged, sturdy, full-sealed steel chassis The space inside a cabinet is more valuable than before and well-concerned ventilation are designed to withstand as the Internet business booming. As a 2U chassis, a shocks, dust, humidity, trembling vibration and high compact system for the application, PRC-2193 saves half operating temperature in the harsh environment. the space than the traditional 4U chassis. Besides, PRC-2193 can adopt either PICMG Backplane The lockable front door of PRC-2193 gives you a better for SBC (PRC-2193P) or ATX motherboard (PRC-2193) data protection for system security. to meet customers' versatile demands. With PICMG

General Dimension MTBF Reliability 482.6(W) x 495.1(D) x 88.6(H) mm Min. 50,000 hours at 25˚C (70˚F) Construction 19"(W) x 19.5"(D) x 3.5"(H) Heavy-duty steel with aluminum front Safety panel Weight UL/CSA/TUV/CE Net: 10.5kg (23.1lb) Air Filter Gross: 11.5kg (25.3lb) Environment One replaceable air filter Backplane (for PRC-2193P) Operating Temperature Range Cooling Fan Vertical 6-slot (4xPCI) Backplane 0 to +55˚C Two 8cm ball-bearing cooling fans Power Supply Storage Temperature Range Disk Drive Housing 0 to +70˚C PRC-2193P: Output Voltage & Current 3 drive bays, one for 5.25", two for 3.5" 300W ATX for PRC-2193P: Relative Humidity 5 to 95% non-condensing (one internal) +5V@26A, +12V@11A, PRC-2193: +3.3V@6A, [email protected], -12V@1A 4 drive bays, one for 5.25", three for 3.5" 150W ATX for PRC-2193: (two internal) +5V@30A, +12V@14A, Indicator +3.3V@7A, [email protected] LED indicators for HDD and power Input Voltage On/Off AC 95 - 130V, 190 - 254V selectable Switch Input Frequency One for reset and one for power On/Off 47Hz - 63Hz Speaker Input Current One 8W speaker 7A max./115V, 4A max./230V ▲ Standard Color Efficiency PRC-2193 in beige Beige, black Min. 70% 2 1 PRC-2193/PRC-2193P Advanced 19" 2U Industrial Rack-mount PC Chassis

Features Benefits ◆ Meet EIA RS-310C standard ◆ Easy to fit in different 19" rack-mount cabinet ◆ Replaceable air filter ◆ For easy cleaning ◆ Dual ball-bearing cooling fans ◆ Better ventilation to enhance system reliability ◆ Replaceable back panel ◆ Easy to change to different backplane ◆ Front door equipped with a key ◆ Better security control for the system ◆ Field replaceable PS/2 power supply ◆ Easy for maintenance

What's New

Visible Drive Cover Two fans for better ventilation Smart PCI Raiser Cards for M/B Switches are inside the drive cover of Two 8cm ball-bearing fans are equipped to PRC-2193 is built with 2 PCI raiser cards to PRC-2193 for better security control. keep better ventilation inside. have two PCI slots in good reliability.

Space for Dual 3.5" HDD in PRC-2193 Well designed B/P for PRC-2193P Space for 3.5" HDD in PRC-2193P PRC-2193 reserves two 3.5" HDD drive PRC-2193P can hold a PBP-06V4 to offer PRC-2193P reserves one 3.5" HDD drive bays behind the fan sets to give higher 4 PCI slots to PICMG system. bays between PSU and CD-ROM. system performance.

Ordering Guide Engineering Drawing

PRC-2193-MX-30S Advanced 19" 2U rack-mount chassis for ATX M/B with 2 PCI slots and 300W Micro ATX PSU PRC-2193-MX-15X Advanced 19" 2U rack-mount chassis for ATX M/B with 2 PCI slots and 150W ATX Micro PSU PRC-2193P-06V4-30X Advanced 19" 2U rack-mount chassis with PICMG Backplane, 4 PCI slots and 300W ATX PSU PRC-2193P-06V4-270RD Advanced 19" 2U rack-mount chassis with PICMG Backplane, 4 PCI slots and 270W redundant PSU 2 2 PRC-4164/PNC-6162 Magic 6-slot Node Chassis

◆ Magic design for wall-mount, desk-top and rack-mount application

◆ Rugged steel node chassis suitable for harsh environment

◆ One built-in 12cm ball-bearing fan for better ventilation

◆ Built-in micro-ATX type power supply

◆ Support one external 5.25" and one internal 3.5" disk drive

◆ Optional kits to combine two PNC-6162 ▲ PRC-4164 for the rack-mount application

PNC-6162 is a compact and rugged 6-slot full-size node With an optional built-in EZDRV, PNC-6162 can support a chassis designed for space limited applications. Its notebook type CD-ROM and FDD within a 5.25" drive rugged, sturdy, full-sealed and well-cooled steel chassis is b a y. It helps you to install the system and application specially designed to withstand shocks, dust, humidity, software more easily. trembling vibration and high operating temperature in the Combining two PNC-6162 into a rack-mount kit with harsh environment. additional software, you can have a high-availability fault tolerant system.

General Speaker Input Voltage One 8W speaker AC 95 - 130V, 190 - 254V selectable Construction Heavy-duty steel Standard Color Input Frequency Beige, Black 47Hz - 63Hz Air Filter One replaceable air filter at the front Dimension Input Current door PNC-6162: 7A max./115V, 4A max./230V 220(W) x 407(D) x 160(H) mm Cooling Fan 8.66"(W) x 16"(D) x 6.3"(H) Efficiency One 12cm (86.5cfm) ball-bearing fan Min. 70% PRC-4164: Disk Drive Housing 482(W) x 407(D) x 177(H) mm MTBF Reliability External: 5.25"x1 19"(W) x 16"(D) x 7"(H) Min. 50,000 hours at 25˚C (70˚F) Internal: 3.5"x1 Weight Safety Indicator PNC-6162: UL/CSA/TUV/CE LED indicators for HDD and power Net: 6.5kg (34.4lb) On/Off Gross: 8.0kg (38.9lb) Environment Switch PRC-4164: Operating Temperature Range One for reset and one for power On/Off Net: 15.5kg (14.3lb) 0 to +55˚C with a protection cap Gross: 17.5kg (17.6lb) Storage Temperature Range Mounting Bracket Backplane 0 to +70˚C Two brackets for vertical and horizontal 6-slot PICMG PISA bus Backplane mounting Relative Humidity 5 to 95% non-condensing Keyboard Connector Power Supply Standard 6-pin PS/2 K/B connectors with a cap Output Voltage & Current +5V@12A, +12V@5A, Keyboard Connector Cap +3.3V@7A, [email protected] One cap for better security

2 3 PRC-4164/PNC-6162 Magic 6-slot Node Chassis

Features Benefits ◆ 5.25" drive space for EZDRV ◆ Built in with FDD and CD-ROM to install software ◆ Replaceable air filter ◆ For easy cleaning ◆ Can be vertically or horizontally mounted ◆ Easy to fit into different space limited environment ◆ Both 6-slot ISA and PICMG BP are applicable ◆ Easy to change to different Backplanes and keep stock ◆ Adopt 150W micro-ATX PSU ◆ Save the space inside the chassis ◆ Special kit to combine dual systems into 4U space ◆ Can be formed as a fault tolerant system

What's New

Special design for the drive bay Can be mounted in different styles Easy-to-use control panel Adopt notebook type device to save space. PNC-6162's front door can be changed for All the switches and LEDs are located at either vertical or horizontal installation. the front panel for direct operation.

Ordering Guide Engineering Drawing

PNC-6162-06I-15X 6-slot full-size industrial node chassis with 6-slot ISA Backplane and 150W micro-ATX power supply PNC-6162-06P3-15X 6-slot full-size industrial node chassis with 6-slot PICMG(3 PCI) Backplane and 150W MICRO ATX power supply PRC-4164-06P3-15X Two sets of PNC-6162 with rack-mount kit, 6-slot PICMG(3 PCI) Backplane and 150W MICRO ATX power supply

▲ PNC-6162

2 4 IRC-305 Advanced 19" 2U Industrial Rack-mount PC Chassis

◆ 19" 2U rack-mount chassis meets EIA RS-310C industrial standard

◆ 5.25"x1+3.5" FDDx1+3.5" HDDx1 drive bay

◆ Replaceable air filter for easy cleaning

◆ Two 8cm ball-bearing cooling fans for better ventilation

◆ One On/Off switch protection cap and one touch free reset for secure access

◆ One K/B connector cap to prevent the front K/B connector from the dust

◆ Replaceable back panel, easy to change to different Backplanes

◆ PS/2 redundant power supply installable

◆ Field replaceable PS/2 PSU applicable, easy for maintenance

IRC-305 is a compact and rugged 19" 2U rack-mount The space inside a cabinet is more valuable than before chassis designed for space limited application, especially as the Internet business blooming. A 2U chassis, which in the telecommunication environment. Its rugged, sturdy, needs just a compact system for the application, saves full-sealed and well-cooled steel chassis is specially half the space than the traditional 4U chassis. designed to withstand shocks, dust, humidity, trembling With the power switch protection cap, IRC-305 can avoid vibration and high operating temperature in the harsh accidental reset of the system. environment .

General Speaker Input Frequency One 8W speaker 43Hz - 63Hz Construction Heavy-duty steel with aluminum front Standard Color Input Current panel Beige, black 8A max./115V, 4A max./230V Air Filter Dimension Efficiency One replaceable air filter 482(W) x 430.6(D) x 88(H) mm Min. 70% 19"(W) x 17"(D) x 3.5"(H) Cooling Fan MTBF Reliability Two 8cm (35.3cfm) ball- bearing fans Weight Min. 50,000 hours at 25˚C (70˚F) Net: 10.5kg (23.1lb) Disk Drive Housing Gross: 11.5kg (25.3lb) Safety 5.25"x1+3.5"x2 (one external FDD, one UL/CSA/TUV/FCC/CE/CB external HDD) Backplane Vertical 6-slot ISA Backplane Environment Indicator Vertical 6-slot PICMG 4xPCI Backplane LED indicators for HDD and power Operating Temperature Range On/Off Power Supply (PW-250) 0 to +55˚C Switch Storage Temperature Range Maximum Output One for reset and one for power On/Off 0 to +70˚C with a protection cap 250W Relative Humidity Output Voltage & Current Keyboard Connector 5 to 95% non-condensing Standard PS/2 K/B connector at the +5V@25A, +12V@10A, front panel [email protected], [email protected] Keyboard Connector Cap Input Voltage One cap at the front panel 95 - 130V/190 - 254V selectable

2 5 IRC-305 Advanced 19" 2U Industrial Rack-mount PC Chassis

Features Benefits ◆ Meet EIA RS-310C standard ◆ Easy to fit in different 19" rack-mount cabinet ◆ Replaceable air filter ◆ For easy cleaning ◆ ON/OFF switch protection cap & touch-free reset ◆ Avoid accidental reset of system ◆ K/B connector cap included ◆ For dust-proof for the front K/B connector ◆ Two 8cm ball-bearing cooling fans ◆ Better ventilation to enhance system reliability ◆ Replaceable back panel ◆ Easy to change to different Backplanes ◆ Field replaceable PS/2 PSU ◆ Easy maintenance

What's New

Detachable card cage Two fans for better ventilation Touch-free ON/OFF & reset switch IRC-305 is equipped with a detachable Two 8cm ball-bearing fan for better For security reasons, a switch protection card cage to install the boards more easily. ventilation. cap is provided to prevent accidental reset.

Ordering Guide Engineering Drawing

IRC-305-06V-25 19" 2U rack-mount chassis with vertical 6-slot ISA Backplane and 250W power supply IRC-305-06V4-25 19" 2U rack-mount chassis with vertical 6-slot PICMG (4xPCI) Backplane and 250W PSU IRC-305-06V4-30X 19" 2U rack-mount chassis with vertical 6-slot PICMG (4xPCI) Backplane and 300W ATX PSU

2 6 IRC-750 19" 5U Rack-mount CTI Chassis with 6 Drive Bays

◆ Enhanced drive bracket to hold 5.25"x4+ 3.5"x1 (or 1xNB CD-ROM+1xNB FDD) drives for RAID

◆ Two 12cm hot-swap ball-bearing cooling fans provide better ventilation

◆ Dual card retainer positions

◆ Modularized function panel for one, dual or quad systems

◆ Power On/Off switch protection cap and touch free reset switch for secure access

◆ PS/2 type redundant PSU installable

◆ ATX M/B applicable, especially for big- AT size M/B

IRC-750 is an advanced 19" 5U industrial rack-mount s t u r d y, full-sealed and well-cooled steel chassis is chassis designed specially for CTI (Computer Telephony specially designed to withstand shocks, dust, humidity, Integration) and fault tolerant server applications. trembling vibration and high operating temperature in the harsh environment. It's the best choice for installing RAID disk with four 5.25" drives and also the floppy and CD-ROM drive. Its rugged,

General Standard Color Input Voltage Beige, black 95 - 132V/185 - 264V auto-range Construction Heavy-duty steel with aluminum front Dimension Input Frequency panel 482(W) x 495.3(D) x 221(H) mm 47Hz - 63Hz 19"(W) x 19.5"(D) x 8.7"(H) Air Filter Input Current One replaceable air filter Weight 7A max./115V, 4A max./230V Net: 19kg (41.8lb) Cooling Fan Gross: 21kg (46.2lb) Efficiency Two 12cm (86.5cfm) ball-bearing fans Min. 70% Backplane Disk Drive Housing 14-slot ISA BP MTBF Reliability 5.25"x4+3.5"x1 (or 5.25"x1 NB CD- Min. 50,000 hours at 25˚C (70˚F) 14-slot PICMG 12xPCI active BP ROM+3.5"x1 NB FDD) 14-slot PICMG 7xPCI active BP Safety Card Retainer 14-slot PICMG 4xPCI BP UL/CSA/TUV/FCC/CE Two locations for one card retainer 13-slot PICMG 4xPCI BP Environment PSU Bracket 13-slot PICMG dual-system BP Replaceable module for PS/2 or PS/2 Operating Temperature Range redundant PSU Power Supply (ORION-450AX) 0 to +55˚C Function Panel Maximum Output Storage Temperature Range Modularized function panel for one or 450W 0 to +70˚C dual systems Output Voltage & Current Relative Humidity Speaker +5V@40A, +12V@17A, 5 to 95% non-condensing One 8W speaker +3.3V@28A, [email protected] [email protected], +5V&+3.3V (max. 225W)

2 7 IRC-750 19" 5U Rack-mount CTI Chassis with 6 Drive Bays

Features Benefits ◆ 19" 5U rack-mount chassis meets EIA RS-310C standard ◆ Easy to fit in a 19" cabinet from different vendors ◆ Extremely compact size (only 49.5 cm / 19.5") ◆ Economic and easy to choose rack-mount cabinet ◆ Modularized function panel for one, dual, quad systems ◆ Easy for installing dual systems and redundant PSU ◆ ON/OFF switch protection cap and touch-free reset switch ◆ Avoid accidental reset of system ◆ Two 12cm ball-bearing hot-swap cooling fans ◆ Best ventilation to provide higher system reliability ◆ Enhanced drive bracket to hold 4x5.25" + 1x3.5" drives ◆ More flexible to integrate varied systems with RAID ◆ Two adjustable positions for hold-down card retainer ◆ Fix all the cards more flexibly and tightly ◆ Changeable modularized back panel for 14-/8-slot ISA & ◆ Need only one minute to change the back panel BP, ATX or baby AT M/B ◆ Easy to change to different PICMG Backplanes and keep stock ◆ Field replaceable power supply bracket for both normal PS/2 ◆ Need only 3 minutes to change defective PSU PSU and PS/2 type redundant PSU

What's New

More drive space for expansion Two fans for better ventilation ATX Motherboard IRC-750 enhances the drives' bracket to IRC-750 is equipped with two ball-bearing ATX and baby AT type motherboards can hold up to four 5.25" disk drive and one NB fans to have better ventilation and a be installed inside IRC-750 just by type floppy and CD-ROM together. It is replaceable filter to exclude dusts. changing the modularized back panel. easy for you to install a RAID 5 disk array with best reliability.

Ordering Guide

IRC-750-14I-45X 19" 5U rack-mount chassis with 14-slot ISA Backplane and 450W Auto-range ATX PSU IRC-750-14P4-45X 19" 5U rack-mount chassis with 14-slot PICMG BP and 450W Auto-range ATX PSU IRC-750-14A7-45X 19" 5U rack-mount chassis with 14-slot 7xPCI PICMG BP and 450W Auto-range ATX PSU IRC-750-MX-45X 19" 5U rack-mount chassis for ATX M/B with ▲ IRC-750 in black 450W ATX PSU

2 8 IRC-850 19" 5U Rack-mount CTI Chassis with 10 Drive Bays

◆ 8x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD) drives for RAID

◆ 3 hot-swap cooling fans for better ventilation

◆ Detachable card cage for easy installation and maintenance

◆ Dual card retainer positions

◆ Modularized function panel for one, dual or quad systems

◆ Power On/Off switch protection cap and touch free reset switch for secure access

◆ 800W (600W+200W) N+1 redundant PSU, suitable for full-loading CTI applications

◆ Modularized back panel, 20-slot BP, baby- AT & ATX M/B applicable, especially for big-AT size M/B

IRC-850 is an advanced 19" 5U Industrial rack-mount Its rugged and detachable card cage is designed for easy chassis specially for CTI (Computer Te l e p h o n y installation and three 12cm hot-swap cooling fan for better Integration) and fault tolerant server applications. Built ventilation. The ways to prevent high temperature from with eight 5.25" drive bays (for RAID) and a 800W new high-frequency CPUs and to expand the system (600W+200W) N+1 redundant PSU, it provides reliable functionality within a limited space are important for power source to the system and non-crash storage to the heavy-loading CTI & new servers to get the best application. reliability.

General Standard Color Input Voltage Beige, black 90 - 132V/180 - 264V selectable Construction Heavy-duty steel with 8mm aluminum Dimension Input Frequency front panel 482(W) x 673(D) x 220(H) mm 47Hz - 63Hz 19"(W) x 26.5"(D) x 8.7"(H) Cooling Fan Input Current Three 12cm hot swap ball- bearing fans Weight 15A max./115V, 8A max./230V Net: 25kg (55lb) Disk Drive Housing Gross: 27kg (59.4lb) Efficiency 5.25"x8+3.5"x1 (or NB CD-ROMx1+NB Min. 70% FDDx1) Backplane 20-slot ISA BP MTBF Reliability Min. 50,000 hours at 25˚C (70˚F) Card Retainer 20-slot PICMG 4-system BP Two locations for one card retainer 19-slot PICMG 18xPCI active BP Safety PSU Bracket 19-slot PICMG 12xPCI active BP UL/TUV/FCC/CE Replaceable module for PS/2 or PS/2 19-slot PICMG 4xPCI BP redundant PSU 18-slot PICMG dual-system BP Environment Function Panel Operating Temperature Range Modularized function panel for one or Power Supply (ORION-2004) 0 to +55˚C dual systems Maximum Output Storage Temperature Range Back Panel 800W 0 to +70˚C Replaceable module for 20-slot BP or ATX/Baby AT M/B Output Voltage & Current Relative Humidity +5V@60A, +12V@24A, 5 to 95% non-condensing Redundant PSU Signal +3.3V@48A, [email protected] 1xModule+1xAlarm+1xBeep Reset -12V@3A, +5V, +12V&+3.3V (max. 550W)

2 9 IRC-850 19" 5U Rack-mount CTI Chassis with 10 Drive Bays

Features Benefits ◆ 19" 5U rack-mount chassis meets EIA RS-310C standard ◆ Easy to fit in a 19" cabinet from different vendors ◆ Modularized function panel for one, dual, quad systems ◆ Easy for installing multiple systems and redundant PSU ◆ ON/OFF switch protection cap and touch-free reset switch ◆ Avoid accidental reset of system ◆ Detachable card cage for easy installation and maintenance ◆ Convenient for system integration ◆ Two adjustable positions for hold-down card retainers ◆ Fix all the cards more flexibly and tightly ◆ Three 12cm hot-swap ball-bearing cooling fans ◆ The best ventilation to provide higher system reliability ◆ Enhanced drive bracket to hold 8x5.25" + 1x3.5" drives ◆ More flexible to integrate varied systems with RAID & CD-ROM drives ◆ Changeable modularized back panel for 20-slot ISA & PICMG ◆ Flexible choice and easy upgrade of architecture to satisfy BP or ATX M/B most current and future application requirements ◆ 800W (600W+200W) N+1 redundant PSU for non-stop computing ◆ Suitable for full-loading CTI applications

What's New

Detachable card cage Replaceable back panel 800W N+1 (600W redundant) PSU IRC-850 is equipped with a detachable Only by changing the modularized back To meet the power requirement of CTI card cage to ease card installation. With panel, different 20-slot Backplanes or ATX system, IRC-850 is equipped with N+1 this cage, it is convenient to link the cables motherboards can be installed into IRC-850. redundant PSU for non-stop operation. between CPU cards and devices.

Ordering Guide

IRC-850-19P4-2004 19" 5U rack-mount chassis of 8x5.25" drives with 19-slot PICMG Backplane and 600W+ 200W N+1 redundant Auto-range ATX PSU IRC-850-19AC-2004 19" 5U rack-mount chassis of 8x5.25" drives with 19-slot PICMG (12 x PCI) Backplane and 600W+ 200W N+1 redundant Auto-range ATX PSU IRC-850-MX-2004 19" 5U rack-mount chassis of 8x5.25" drives for ATX M/B with 600W+ 200W N+1 redundant Auto- range ATX PSU

● Special model for SPARC system board is ▲ Top View of IRC-850 also ready for OEM customers 3 0 IRC-860 19" 6U Rack-mount CTI Chassis

◆ 4x5.25"+2x3.5" or 2x5.25"+6x3.5" drive bays for RAID

◆ Three 12cm ball-bearing cooling fans provide better ventilation for better system reliability

◆ New rack-mount handle

◆ Detachable card cage for easy installation and maintenance

◆ Modularized function panel for one, dual or quad systems

◆ Single PS/2 power supply & dual PS/2 400W+400W redundant PSU installable

◆ Replaceable modularized back panel for 20-/14-slot ISA/PICMG BP or ATX M/B

IRC-860 is an advanced 19" 6U industrial rack-mount ventilation. Besides, its design concept to prevent high chassis designed specially for CTI (Computer Telephony temperature from new high-frequency CPUs and to Integration) and fault tolerant server applications. provide sufficient power source to the system is important for heavy-loading CTI & new servers to get the best Its rugged & detachable card cage is designed for easy reliability. installation and three 12cm cooling fans for better

General Standard Color Input Voltage Beige, black 95 - 132V/185 - 264V Auto-range Construction Heavy-duty steel with aluminum front Dimension Input Frequency panel 482(W) x 495.3(D) x 266(H) mm 47Hz - 63Hz 19"(W) x 19.5"(D) x 10.5"(H) Air Filter Input Current One replaceable filter for boards and Weight 7A max./115V, 4A max./230V two for drives Net: 22kg (48.4lb) Gross: 24kg (52.8lb) Efficiency Cooling Fan Min. 70% Three 12cm (86.5cfm) ball-bearing fans Backplane 20-slot ISA Backplane MTBF Reliability Min. 50,000 hours at 25˚C (70˚F) Disk Drive Housing 20-slot PICMG 4-system BP A type: 2x5.25"+6x3.5"; B type: 4x5.25"+2x3.5" 19-slot PICMG (18xPCI) active BP Safety 19-slot PICMG (12xPCI) active BP UL/CSA/TUV/FCC/CE Card Retainer 19-slot PICMG (4xPCI) BP Two locations for one card retainer 18-slot PICMG dual-system BP Environment Card Cage Operating Temperature Range Removable card cage for easy Power Supply (ORION-450AX) 0 to +55˚C installation Maximum Output Storage Temperature Range PSU Bracket 450W 0 to +70˚C Replaceable module for PS/2 or PS/2 redundant PSU Output Voltage & Current Relative Humidity +5V@40A, +12V@17A, 5 to 95% non-condensing Function Panel +3.3V@28A, [email protected] Replaceable module for PS/2 or PS/2 [email protected], +5V&+3.3V (max. 225W) redundant PSU

3 1 IRC-860 19" 6U Rack-mount CTI Chassis

Features Benefits ◆ 19" 6U rack-mount chassis meets EIA RS-310C standard ◆ Easy to fit in a 19" cabinet from different venders ◆ Extremely compact size ( Only 49.5 cm / 19.5" ) ◆ Economic and easy to choose rack-mount cabinet ◆ Modularized function panel for one, dual, quad systems ◆ Easy for installing multiple systems and redundant PSU ◆ Reserve LEDs & beep reset switches for redundant PSU ◆ Easy to keep stock and OEM project ◆ Detachable card cage for easy installation and maintenance ◆ Convenient and economic for system integration ◆ Three 12cm ball-bearing cooling fans ◆ The best ventilation to provide higher system reliability ◆ Two types of drives housing for 4x5.25"+2x3.5" or ◆ More flexible to integrate varied systems with RAID & 2x5.25"+6x3.5" drives CD-ROM ◆ Replaceable modularized back panel for 20-/14-slot ISA & ◆ Flexible choice and easy upgrade of architecture to satisfy PICMG BP or ATX M/B most current and future application requirements ◆ Field replaceable power supply bracket for both normal ◆ Need only 3 minutes to change defective PSU PS/2 PSU and dual PS/2 type redundant PSU ◆ Only 30 seconds to change defective PSU module

What's New

Detachable card cage Replaceable back panel for PSUs Replaceable back panel for different IRC-860 is equipped with a detachable For non-stop operation under CTI systems, Backplanes or ATX motherboard card cage to ease card installation. It is its modularized back panel design help to By changing the modularized back panel, convenient to link the cables between CPU install single or dual PS/2 400W + 400W different 20-slot Backplanes or ATX and cards and devices. redundant PSU. baby AT motherboards can be installed into IRC-860.

Ordering Guide

IRC-860B-19P4-450AX 19" 6U rack-mount chassis of 4x5.25"+2x3.5" drives with 19-slot PICMG Backplane and 450W Auto-range ATX power supply IRC-860B-19P4-3005 19" 6U rack-mount chassis of 4x5.25"+2x3.5" drives with 19-slot PICMG Backplane and 300W redundant ATX power supply IRC-860B-19P4-4005 Replaceable function panel 19" 6U rack-mount chassis of 4x5.25"+2x3.5" drives with 19-slot Three modular designed function panels PICMG Backplane and 400W redundant ATX power supply are available for single , dual and quad IRC-860B-MX-450AX systems display. Any OEM project is 19" 6U rack-mount chassis of 4x5.25"+2x3.5" drives for ATX M/B welcome. with 450W Auto-range ATX power supply P.S.: "A" means 2x5.25"+6x3.5" drives "B" means 4x5.25"+2x3.5" drives

3 2 RPC-500NE The Most Cost-effective 19" 4U Rack-mount PC Chassis

◆ Three 5.25" and two 3.5" drive bays for RAID 0, 1, 5 & CD-ROM

◆ Two ball-bearing cooling fans for better ventilation

◆ Traditional rack-mount handles

◆ Dual card retainer positions and one K/B connector cap included

◆ One modularized function panel for single & dual systems

◆ ATX M/B applicable, especially for big- AT size M/B

◆ PS/2 redundant power supply installable

RPC-500NE is the most cost-effective 19" 4U rack-mount These useful enhancements to meet the newest chassis designed for various kinds of servers, Computer technology make RPC-500NE the best choice to integrate Telephony Integration (CTI) and telecommunication your rack-mount systems. applications. We enhanced RPC-500NE with a special designed The rugged, sturdy, full-sealed and well-cooled steel drivers set to hold one more device such as CD-ROM chassis is specially designed to withstand heavy shocks, with FDD inside the chassis, it will leave more device dust, humidity, trembling vibration and extremely high space for high level application. operating temperature in the harsh environment.

General Dimension Input Current 482(W) x 450(D) x 177(H) mm 10A max./115V, 5A max./230V Construction 19"(W) x 17.7"(D) x 7"(H) Heavy-duty steel with aluminum front Efficiency panel Weight Min. 70% Net: 15.5kg (34.4lb) Air Filter Gross: 17.5kg (38.9lb) MTBF Reliability One replaceable filter Min. 50,000 hours at 25˚C (70˚F) Backplane Cooling Fan 14-slot ISA backplane Safety One 12cm (86.5cfm) and one 8cm UL/CSA/TUV/FCC/CE 14-slot PICMG 12xPCI active Backplane (35.3cfm) ball-bearing cooling fans 14-slot PICMG 7xPCI active Backplane Environment Disk Drive Housing 14-slot PICMG 4xPCI Backplane 3x5.25"+2x 3.5" (one for external FDD 13-slot PICMG dual-system Backplane Operating Temperature Range and one for internal HDD) drive bays 0 to +55˚C Card Retainer Power Supply (ORION-330A) Storage Temperature Range Two locations for one card retainer Maximum Output 0 to +70˚C 330W Switch Relative Humidity One for reset, one for power On/Off and Output Voltage & Current 5 to 95% non-condensing one for K/B lock +5V@30A, +12V@14A, Keyboard Connector [email protected], -12V@1A Standard 6-pin PS/2 K/B connectors at Input Voltage the front and the rear panel 95 - 132V/185 - 264V Auto-range Keyboard Connector Cap Input Frequency One cap at the front panel 47Hz - 63Hz Standard Color Beige, black

3 3 RPC-500NE The Most Cost-effective 19" 4U Rack-mount PC Chassis Features Benefits ◆ 19" 4U Rack-mount chassis meets EIA RS-310C standard ◆ Easy to fit in a 19" cabinet from different venders ◆ A lockable front door with acrylic windows ◆ Good for dust-proof ◆ Power ON/OFF switch with LED indicator, reset and K/B lock ◆ Avoid accidental reset for better running security switches inside the lockable door ◆ Running status visible ◆ Modularized function panel for one or dual systems ◆ Easy for installing dual systems and redundant PSU ◆ Reserve LED holes for redundant PSU ◆ Easy to keep stock and OEM project ◆ Replaceable air filter ◆ Good for easy cleaning ◆ Two K/B DIN connectors on both front and rear panels ◆ Convenient to connect to the keyboard ◆ New K/B connector cap ◆ Good for dust-proof at the front K/B connector ◆ Two ball-bearing cooling fans ◆ Better ventilation to provide the system with higher reliability ◆ Enhanced drive bracket to hold 3x5.25"+1x3.5" (or EZ-Kit) ◆ More flexibility to integrate varied systems and 1x3.5" drives (internal) ◆ Suitable for installing RAID and CD-ROM drive ◆ Shock-mount cushion for the drive bracket ◆ Suitable for harsh industrial environment ◆ Two adjustable positions for hold-down card retainers ◆ More flexibly and tightly to fix all the cards ◆ Changeable modularized back panel for 14-slot ISA/PICMG BP ◆ Only one minute needed to change the back panel or ATX M/B ◆ Easy to change to different Backplanes and keep stock ◆ Field replaceable power supply bracket for both normal ◆ Only 3 minutes needed to change the defective PSU PS/2 PSU and PS/2 type redundant PSU ◆ Only 30 seconds to change the defective PSU module

What's New

Special designed drivers set 3x5.25"+2x3.5" drive space ATX motherboard Special designed drivers set to hold one RPC-500NE enhances the drive bracket ATX mother board can be installed inside slim CD-ROM & FDD, it can leave more to hold up to three 5.25" and two 3.5" RPC-500NE just by changing the drive space available for higher application. drive bays for RAID 0, 1, 5 & CD-ROM. modularized back panel.

Replaceable function panel Replaceable panel for PSU modules Two fans for better ventilation Two modular designed function panels are RPC-500NE is designed to install different RPC-500NE is equipped with two ball- available for single or dual system di s p l a y PSU panels for PS/2 or redundant PS/2 bearing fans to have better ventilation and panels. Any OEM project is welcome. type power supply. a replaceable filter to exclude dust.

Dual card retainers position K/B connector cap Two positions for card clamps to hold both RPC-500NE includes a PS/2 keyboard 3 4 PCI and ISA cards more tightly. connector cap to prevent dust. RPC-500NE The Most Cost-effective 19" 4U Rack-mount PC Chassis

Engineering Drawing

Ordering Guide PICMG Version RPC-500NE-14I-330A 19" 4U rack-mount chassis with 14-slot ISA Backplane and 330W Auto-range AT PSU RPC-500NE-14P4-330A 19" 4U rack-mount chassis with 14-slot PICMG BP and 330W Auto-range AT PSU RPC-500NE-14A7-330A 19" 4U rack-mount chassis with 14-slot 7-PCI PICMG Backplane and 330W Auto-range AT PSU M/B Version RPC-500NE-MX-30X 19" 4U rack-mount chassis for ATX M/B with 300W ATX PSU EZ-Kit (optional) The Kit to hold one slim type CD-ROM & FDD in a enhanced 3.5" drive bay

3 5 RPC-520 19" 20-slot 4U Industrial Rack-mount PC Chassis

◆ 19" rack-mount chassis meets EIA RS-310C industrial standard

◆ Rugged construction suitable for harsh industrial environment

◆ Lockable front door for dust-proof and running security

◆ Power On/Off switch with LED indicator and a reset switch inside the lockable door

◆ Replaceable air filter for easy cleaning

◆ Three cooling fans and easily installed drive bracket with shock-resistant cushion and well-conductive rubber Specifications ◆ Removable disk drive bracket for 5 devices (3.5"x3, 5.25"x2) General ◆ Support 20-slot ISA, 19-slot PICMG & Construction Heavy-duty steel multiple-system backplanes Air Filter One removable front-panel filter ◆ Safety-approved 450W ATX PSU installed Cooling Three cooling fans behind the fan filter panel and one within the PSU Disk Drive Housing Five drive bays, 3.5"x3, 5.25"x2 Indicator LED indicators for HDD and power On/Off Ordering Guide Switch K/B lock, reset & power On/Off Keyboard Connector AT-connectors at both front and rear panel RPC-520-20I-450AX Standard Color Light gray 19" 4U industrial chassis with 19-slot ISA Backplane and 450W PSU Dimension 482(W) x 638(D) x 177(H) mm 19"(W) x 25.1"(D) x 7"(H) RPC-520-20Q3-450AX Weight Net: 23kg (51.1lb) 19" 4U industrial chassis with 20-slot Gross: 25kg (55.6lb) 4-system PICMG BP and 450W PSU RPC-520-19AI-450AX Backplane 19" 4U industrial chassis with 19-slot 20-slot ISA Backplane PICMG BP (18xPCI) and 450W PSU 20-slot PICMG 4-System Backplane 19-slot PICMG 18xPCI active Backplane RPC-520-19AC-450AX 19" 4U industrial chassis with 19-slot 19-slot PICMG 12xPCI active Backplane PICMG BP (12xPCI) and 450W PSU 19-slot PICMG 4xPCI Backplane 18-slot PICMG dual-system Backplane RPC-520-19P4-450AX 19" 4U industrial chassis with 20-slot ISA Power Supply (ORION-450AX) BP and 450W PSU Maximum Output 450W RPC-520-18D4-450AX Output Voltage +5V@40A, +12V@17A, 19" 4U industrial chassis with 18-slot & +3.3V@28A, [email protected] dual-system PICMG BP and 450W PSU Current [email protected], +5V&+3.3V (max. 225W) Input Voltage 95 - 132V/185 - 264V Auto-range Input Frequency 47Hz - 63Hz Input Current 7A@115V, 4A@230V Efficiency Min. 70% MTBF Reliability Min. 50,000 hours at 25˚C (70˚F) Safety UL/CSA/TUV/FCC/CE

Environment Operating Temperature 0 to +55˚C Storage Temperature 0 to +70˚C Relative Humidity 5 to 95% non-condensing ▲ Top view of RPC-520 3 6 RPC-520FT 19" 4U Rack-mount Fault Tolerant Server (FTS) Chassis

◆ 19" rack-mount chassis meets EIA RS- 310C industrial standard

◆ Rugged construction and design for harsh industrial environment

◆ Front swappable PS/2 type redundant PSU

◆ Design for replaceable RAID disk

◆ Six 5.25" drive bays for various RAID configuration

◆ Three 12cm ball-bearing cooling fans generate positive air to have better ventilation Specifications ◆ Special design, multiple (4 or 2) systems General installable Construction Heavy-duty steel ◆ Safety-approved PS/2 type hot swap Cooling Three ball-bearing fans between RAID devices and redundant PSU installed the system and one within the power Disk Drive Housing Six 5.25" drive bays, one for CD-ROM drive or RAID controller and five for RAID disks Switch Four reset & power On/Off Standard Color Beige, black Ordering Guide Dimension 482(W) x 638(D) x 177(H) mm 19"(W) x 25.1"(D) x 7"(H) RPC-520FT-20Q3-270RD1 Weight Net: 23kg (51.1lb) 19" 4U rack-mount FTS chassis with 20-slot Gross: 25kg (55.6lb) 4-system PICMG Backplane and 500W redundant PSU Backplane RPC-520FT-19P4-270RD1 20-slot PICMG 4-system Backplane 19" 4U rack-mount FTS chassis with 19-slot 19-slot PICMG 18xPCI active Backplane PICMG Backplane and 450W redundant 19-slot PICMG 12xPCI active Backplane PSU 19-slot PICMG 4xPCI Backplane RPC-520FT-18D4-270RD1 18-slot PICMG dual-system Backplane 19" 4U rack-mount FTS chassis with dual- ATX M/B installable system Backplane and 500W PS/2 type redundant PSU Power Supply (BPS-270RD-1) Maximum Output 500W Output Voltage & +5V@30A, +12V@14A (max. 240W), Current [email protected], [email protected] Input Voltage 90 - 132V/180 - 264V Auto-range Input Frequency 47Hz - 63Hz Input Current 6A@115V, 3A@230V Efficiency Min. 75% MTBF Reliability Min. 50,000 hours at 25˚C (70˚F) Safety UL/CUL/TUV/CE

Environment Operating Temperature 0 to +55˚C Storage Temperature 0 to +70˚C Relative Humidity 5 to 95% non-condensing

▲ Top view of RPC-520FT 3 7 RPC-600FT 19" 4U Rack-mount Fault Tolerant Server (FTS) Chassis

◆ 19" rack-mount chassis meets EIA RS- 310C industrial standard

◆ Rugged construction suitable for harsh industrial environment

◆ Power On/Off switch with light indicator and a reset switch

◆ Nine 5.25" drive bays for various RAID configuration

◆ Three 12cm ball-bearing cooling fans generate positive air to have better ventilation

◆ One keyboard DIN connector on the rear Specifications panel General ◆ Specially designed dual-system PICMG Construction Heavy-duty steel backplane for installing two systems Cooling Three ball-bearing fans between RAID devices and inside the system and one within the power ◆ Support 14-slot PICMG Backplane or Disk DriveHousing Nine 5.25" drive bays, one for CD-ROM drive or RAID ATX motherboard controller and five for RAID disks Switch Reset & power On/Off ◆ Both PS/2 and PS/2 type hot-swap Indicator Eight LED indicators for HDD and power On/Off switch redundant PSU available Standard Color Light gray, black Dimension 482(W) x 638(D) x 177(H) mm 19"(W) x 25.1"(D) x 7"(H) Ordering Guide Weight Net: 23Kg.(51.1Lb) Gross: 25Kg.(55.6Lb) RPC-600FT-14P4-270RD 19" 4U rack-mount FTS chassis with 14-slot Backplane PICMG Backplane and 500W PS/2 type 13-slot dual-system BP Dual active systems installation: redundant PSU - System 1 with 2xISA / 4xPCI - System 2 with 2xISA / 3xPCI RPC-600FT-13D4-270RD 14-slot PICMG BP Gold-plated, 4-layer Backplane 19" 4U rack-mount FTS chassis with dual- system Backplane and 500W PS/2 type ATX M/B installable redundant PSU Power Supply (BPS-270RD) RPC-600FT-ATX-270RDX Maximum Output 500W 19" 4U rack-mount FTS chassis with 500W Output Voltage & +5V@30A, +12V@14A, 3.3V@20A (max. 240W), PS/2 type redundant ATX PSU for ATX M/B Current [email protected], [email protected], [email protected] Input Voltage 90 - 132V/180 - 264V Auto-range Input Frequency 47Hz - 63Hz Input Current 6A@115V, 3A@230V Efficiency Min. 75% MTBF Reliability Min. 50,000 hours at 25˚C (70˚F) Safety UL/CUL/TUV/CE

Environment Operating Temperature 0 to +55˚C Storage Temperature 0 to +70˚C Relative Humidity 5 to 95% non-condensing

▲ Top view of RPC-600FT 3 8 RPC-800 19" 4U Industrial Rack-mount PC Chassis for 14 Full-length Cards

◆ 19" rack-mount chassis meets EIA RS- 310C industrial standard

◆ Rugged construction and design for harsh industrial environment

◆ Power On/Off switch with LED indicator and a reset switch inside the lockable door

◆ Replaceable air filter for easy cleaning

◆ Two cooling fans generate positive air for better ventilation

◆ Easily-installed drive bracket with shock- resistant cushion and well-conductive Specifications rubber General ◆ Specially designed for 14 full-length cards Construction Heavy-duty steel Air Filter One removable front-panel filter ◆ Support 14-slot ISA and various PICMG Cooling Two cooling fans behind the fan filter panel and Backplane one within the PSU ◆ Many options of PSU: Safety-approved Disk Drive Housing Two 3.5" drive bays 380W Auto-range PS/2 PSU, 48VDC/DC Indicator LED indicators for HDD and power On/Off converter and PS/2 type redundant PSU Switch Reset & power On/Off Keyboard Connector PS/2-connectors at both front and rear panel Ordering Guide Standard Color Light gray Dimension 482(W) x 450.8(D) x 177(H) mm RPC-800-14I-33A 19"(W) x 17.7"(D) x 7"(H) RPC-800 with 14-slot ISA Backplane and Weight Net: 15.5kg (34.4lb) 330W PSU Gross: 17kg (37.8lb) RPC-800-14P4-33A RPC-800 with 14-slot PICMG Backplane Backplane (4xPCI) and 330W PSU 14-slot ISA Backplane 14-slot PICMG (12xPCI) active Backplane RPC-800-14AC-33A RPC-800 with 14-slot PICMG Backplane 14-slot PICMG (7xPCI) active Backplane (12xPCI) and 330W PSU 14-slot PICMG (4xPCI) Backplane 13-slot PICMG dual-system Backplane RPC-800-14A7-33A RPC-800 with 14-slot PICMG Backplane Power Supply (ORION-330A) (7xPCI) and 330W PSU Maximum Output 330W RPC-800-13D4-33A Output Voltage & +5V@30A, +12V@14A, RPC-800 with dual-system PICMG Current [email protected], -12V@1A Backplane and 330W PSU Input Voltage 95 - 132V/185 - 264V Auto-range Input Frequency 47Hz - 63Hz Input Current 10A@115V, 5A@230V Efficiency Min. 70% MTBF Reliability Min. 50,000 hours at 25˚C (70˚F) Safety UL/CSA/TUV/FCC/CE

Environment Operating Temperature 0 to +55˚C Storage Temperature 0 to +70˚C Relative Humidity 5 to 95% non-condensing

▲ Top view of RPC-800 3 9 RDA-209 19" 4U 9-drive Rack-mount Disk Array Chassis

◆ The most compact size to fit 9 disk drives in a 19" rack-mount chassis

◆ Three horizontal drive bays for some special devices, such as RAID controller and CD-ROM

◆ 450W redundant and standard PS/2 power supply optional

◆ Two cooling fans for better ventilation

◆ Only 4U in height, suitable for communication node or rack server

◆ Easy for system installation and maintenance Specifications General Construction Heavy-duty steel Cooling Two 12cm internal cooling fans Disk Drive Housing Nine 5.25" drive bays Standard Color Light gray, black Dimension 482(W) x 450(D) x 177(H) mm 19"(W) x 17.7"(D) x 7"(H) Weight Net: 15kg (33.3lb) Gross: 16kg (35.6lb)

Power Supply ▲ RDA-209 with redundant PSU Maximum Output 450W Output Voltage +5V@30A, +12V@14A, & [email protected], [email protected] Current +12V (max. 220W) Input Voltage 90 - 132V/180 - 264V Input Frequency 47Hz - 63Hz Input Current 10A@115V, 5A@230V Efficiency Min. 80% MTBF Reliability Min. 50,000 hours at 25˚C (70˚F) Safety UL/CUL/TUV/CE

Environment ▲ Power supply bracket Operating Temperature 0 to +55˚C Storage Temperature 0 to +70˚C Relative Humidity 5 to 95% non-condensing

Ordering Guide

RDA-209 19" rack-mount disk array chassis w/o power supply RDA-209-3002 19" rack-mount disk array chassis with 300W redundant power supply

▲ RDA-209 with PS/2 PSU RDA-209-38A 19" rack-mount disk array chassis with 380W PS/2 power supply

4 0 IRC-215N/PIK-215A 19" 1U Rack-mount Keyboard Drawer with Keyboard & Trackball

◆ Smart and compact design for rack- mount application

◆ 1U (1.75") in height to save space

◆ Equipped with 101-key keyboard and trackball

Ordering Guide

IRC-215N 19" 1U industrial keyboard drawer with 101-key keyboard & trackball IRC-215N is the slimmest keyboard drawer which houses a compact PIK-215A IBM-PC XT/AT compatible 101-key keyboard and a trackball for Windows 19" 1U industrial keyboard drawer with application. It has a slide bar for holding the keyboard and trackball cable 101-key keyboard & trackball for smooth operation.

Engineering Drawing Specifications Keyboard No. of Keys 101 Keys Travel 4mm LED Num. Cap. Scroll Lock MTBF 10 million strokes Interface AT or PS/2 Safety UL, CE

Trackball No. of Keys 3 Compatibility Microsoft Interface DB9 or PS/2 Safety UL, CE

General Construction Heavy-duty steel Color Beige, black Drawer Travel 11" Dimension 482.8(W) x 333(D) x 44(H) mm 19"(W) x 13.1"(D) x 1.7"(H) Weight Net: 5.5kg (12.2lb) Gross: 6.5kg (14.4lb) Operating Temperature 0 to +55˚C / 20-90%RH Storage Temperature 0 to +70˚C / 5-95%RH Relative Humidity 5 to 95% non-condensing

▲ PIK-215A 4 1 IRC-210N/PIK-210A 19" 1U Rack-mount Keyboard Drawer with 101-Key Keyboard

◆ Smart and compact design for rack- mount application

◆ 1U (1.75") in height to save space

◆ Equipped with 101-key keyboard

Ordering Guide

IRC-210N 19" 1U industrial keyboard drawer with 101-key keyboard IRC-210N, a slim keyboard drawer which houses a specially compact PIK-210A IBM-PC XT/AT compatible 101-key keyboard, is nearly the same as IRK- 19" 1U industrial keyboard drawer with 215 except trackball. 101-key keyboard

Engineering Drawing Specifications Keyboard No. of Keys 101 Keys Travel 4mm LED Num. Cap. Scroll Lock MTBF >10 million strokes Interface AT or PS/2 Safety UL, CE

General Construction Heavy-duty steel Color Beige, black Drawer Travel 11" Dimension 482.8(W) x 333(D) x 44(H) mm 19"(W) x 13.1"(D) x 1.7"(H) Weight Net: 4.2kg (9.3lb) Gross: 5.6kg (12.4lb) Operating Temperature 0 to +55˚C / 20-90%RH Storage Temperature 0 to +70˚C / 5-95%RH Relative Humidity 5 to 95% non-condensing

▲ PIK-210A 4 2 IRC-308 8-slot Full-size Industrial Node Chassis (Shoe-box)

◆ 5.25" drive space for CD-ROM or mobile rack, easy to install software and mirror disk (RAID1)

◆ Replaceable air filter for easy cleaning

◆ Fan direction changeable

◆ Can be vertically or horizontally mounted, easy to fit into space limited environment

◆ One 12cm ball-bearing cooling fan for better ventilation

◆ Two adjustable positions for hold-down card retainers provide higher flexibility to fix all the cards tightly

◆ Both 8-slot ISA and PICMG BP applicable, easy to change to different Backplanes

IRC-308 is a compact and rugged 8-slot full-size node chassis ◆ Field replaceable power supply bracket designed for space limited application. Its rugged, sturdy, full-sealed for both normal PS/2 and PS/2 type and well-cooled steel chassis is specially designed to withstand shocks, redundant PSU, easy for defective PSU dust, humidity, trembling vibration and extremely operating temperature changing in the harsh environments.

General Keyboard Connector Cap Input Voltage One cap for better security 95 - 130V/190 - 254V selectable Construction Heavy-duty steel Speaker Input Frequency One 8W speaker 43Hz - 63Hz Air Filter One replaceable air filter at the front Standard Color Input Current door Beige, black 8A max./115V, 4A max./230V Cooling Fan Dimension Efficiency One 12cm (86.5cfm) ball-bearing fan 330(W) x 408(D) x 172(H) mm Min. 70% 13"(W) x 16.1"(D) x 6.8"(H) Disk Drive Housing MTBF Reliability External: 5.25"x2+3.5" FDDx1 Weight Min. 50,000 hours at 25˚C (70˚F) Internal: 3.5" HDDx1 Net: 9kg (19.8lb) Gross: 10kg (22lb) Safety Indicator UL/CSA/TUV/FCC/CE/CB LED indicators for HDD and power Backplane On/Off 8-slot ISA Backplane Environment 8-slot PICMG (4xPCI) Backplane Switch 8-slot PICMG (3xPCI) Backplane Operating Temperature Range One for reset and one for power On/Off 0 to +55˚C with a protection cap Power Supply (PW-250) Storage Temperature Range Mounting Bracket 0 to +70˚C Two brackets for vertical and horizontal Maximum Output mounting 250W Relative Humidity 5 to 95% non-condensing Keyboard Connector Output Voltage & Current Standard 5-pin AT K/B connector with a +5V@25A, +12V@10A, cap [email protected], [email protected]

4 3 IRC-308 8-slot Full-sized Industrial Node Chassis (Shoe-box)

Features Benefits ◆ 5.25" drive space for CD-ROM or mobile rack ◆ Easy to install software and mirror disk (RAID 1) ◆ Replaceable air filter ◆ For easy cleaning ◆ Can be vertically or horizontally mounted ◆ Easy to fit into different space limited environment ◆ Two adjustable positions for hold-down card retainer ◆ Fix all the cards more flexibly and tightly ◆ Both 8-slot ISA and PICMG Backplane are applicable ◆ Easy to change to different Backplane and keep stock ◆ Field replaceable power supply bracket for both normal ◆ Easy for maintenance PS/2 PSU and PS/2 type redundant PSU ◆ Need only 30 seconds to change the defective PSU module

What's New

Redundant power supply Can be mounted in different styles Dual card retainers With a new bracket, a PS/2 or redundant IRC-308's front door can be changed for It has two positions for card clamps to hold PSU can be installed to enhance security. either vertical or horizontal installation. both PCI and ISA cards tightly.

Ordering Guide Engineering Drawing

IRC-308-08I-25 8-slot full-size industrial node chassis with 8-slot ISA Backplane and 250W power supply IRC-308-08P4-25 8-slot full-size industrial node chassis with 4xPCI Backplane and 250W power supply IRC-308-08P4-30X 8-slot full-size industrial node chassis with 4xPCI Backplane and 300W ATX power supply IRC-308-08P3-25 8-slot full-size industrial node chassis with 3xPCI Backplane and 250W power supply

4 4 IRC-306 6-slot Full-size Industrial Node Chassis (Shoe-box)

◆ One external 5.25" and 3.5" and one internal HDD drive bays

◆ Replaceable air filter for easy cleaning

◆ Can be vertically or horizontally mounted, easy to fit into space limited environment

◆ One 12cm ball-bearing cooling fan for better ventilation

◆ Fan direction changeable

◆ Two adjustable positions for hold-down card retainers provide better protection from vibration

◆ Both 6-slot ISA and PICMG BP applicable, easy to change to different Backplanes

◆ Field replaceable power supply bracket for IRC-306 is a compact and rugged 6-slot full-size node chassis both normal PS/2 and PS/2 type redundant designed for space limited applications. Its rugged, sturdy, full- PSU, easy for defective PSU changing sealed and well-cooled steel chassis is specially designed to withstand shocks, dust, humidity, trembling vibration and high operating temperature in the harsh environment.

General Keyboard Connector Cap Input Voltage One cap for better security 95 - 130V/190 - 254V selectable Construction Heavy-duty steel Speaker Input Frequency One 8W speaker 43Hz - 63Hz Air Filter One replaceable air filter at the front Standard Color Input Current door Beige 8A max./115V, 4A max./230V Cooling Fan Dimension Efficiency One 12cm (86.5cfm) ball-bearing fan 260(W) x 408(D) x 172(H) mm Min. 70% 10.2"(W) x 16.1"(D) x 6.8"(H) Disk Drive Housing MTBF Reliability External: 5.25"x1+3.5" FDDx1 Weight Min. 50,000 hours at 25˚C (70˚F) Internal: 3.5" HDDx1 Net: 8.5Kg.(18.7 lb) Gross: 9.5Kg.(20.9 lb) Safety Indicator UL/CSA/TUV/FCC/CE/CB LED indicators for HDD and power Backplane On/Off 6-slot ISA Backplane Environment 6-slot PICMG (4xPCI) Backplane Switch 6-slot PICMG (3xPCI) Backplane Operating Temperature Range One for reset and one for power On/Off 0 to +55˚C with a protection cap Power Supply (PW-250) Storage Temperature Range Mounting Bracket 0 to +70˚C Two brackets for vertical and horizontal Maximum Output mounting 250W Relative Humidity 5 to 95% non-condensing Keyboard Connector Output Voltage & Current Standard 5-pin AT K/B connector with a +5V@25A, +12V@10A, cap [email protected], [email protected]

4 5 IRC-306 6-slot Full-sized Industrial Node Chassis (Shoe-box)

Features Benefits ◆ 5.25" drive space for CD-ROM or mobile rack ◆ Easy to install software ◆ Replaceable air filter ◆ For easy cleaning ◆ Can be vertically or horizontally mounted ◆ Easy to fit into different space limited environment ◆ Two adjustable positions for hold-down card retainer ◆ Fix all the cards more flexibly and tightly ◆ Both 6-slot ISA and PICMG Backplane are applicable ◆ Easy to change to different Backplane and keep stock ◆ Field replaceable power supply bracket for both normal ◆ Easy for maintenance PS/2 PSU and PS/2 type redundant PSU ◆ Need only 30 seconds to change the defective PSU module

What's New

Redundant power supply Can be mounted in different styles Dual card retainers With a new bracket, a PS/2 or redundant IRC-306's front door can be changed for It has two positions for card clamps to hold PSU can be installed to enhance reliability. either vertical or horizontal installation. both PCI and ISA cards tightly.

Ordering Guide Engineering Drawing

IRC-306-06I-25 6-slot full-size industrial node chassis with 6-slot ISA Backplane and 250W power supply IRC-306-06P4-25 6-slot full-size industrial node chassis with 6-slot 4xPCI Backplane and 250W PSU IRC-306-06P3-25 6-slot full-size industrial node chassis with 6-slot 3xPCI Backplane and 250W PSU

4 6 IRC-306S 6-slot Industrial Node Chassis with NB CD-ROM, FDD and HDD

◆ Support one 5.25" drive bay for EZDRV-300 or other kind of device

◆ Can be vertically or horizontally mounted, easy to fit into space limited environment

◆ Fan direction changeable

◆ Replaceable air filter for easy cleaning

◆ One On/Off switch protection cap and one touch free reset for secure access

◆ Equipped with one K/B connector cap to prevent the front K/B connector from the dust

IRC-306S is a compact and rugged 6-slot node chassis for industrial ◆ One 12cm ball-bearing cooling fan controller in the space limited application. Since CD-ROM is the most provides better ventilation to enhance common device for installing s/w, it is equipped with a notebook PC CD- system reliability ROM drive for easy installation of the necessary OS or application s/w. ◆ Built-in 130W power supply Its rugged, sturdy, full-sealed and well-cooled steel chassis is designed to withstand heavy shock, dust, humidity, vibration and high temperature in the harsh environments.

General Speaker Input Frequency One 8W speaker 43Hz - 63Hz Construction Heavy-duty steel Standard Color Input Current Black, beige 8A max./115V, 4A max./230V Air Filter One replaceable air filter at the front Dimension Efficiency door 172(W) x 256.7(D) x 194(H) mm Min. 70% 6.8"(W) x 10.1"(D) x 7.6"(H) Cooling Fan MTBF Reliability One 12cm (86.5cfm) ball-bearing fan Weight Min. 50,000 hours at 25˚C (70˚F) Net: 5.5kg (12.1lb) Disk Drive Housing Gross: 6kg (13.2lb) Safety External: NB CD-ROMx1+NB FDDx1 UL/CSA/TUV/CE Internal: NB 2.5" FDDx1 Backplane 6-slot ISA Backplane Environment Indicator 6-slot PICMG PISA bus Backplane LED indicators for HDD and power Operating Temperature Range On/Off Power Supply (O R I O N - 1 3 0 A TX ) 0 to +55˚C Switch Storage Temperature Range Maximum Output One for reset and one for power On/Off 0 to +70˚C with a protection cap 135W Relative Humidity Output Voltage & Current Keyboard Connector 5 to 95% non-condensing Standard PS/2 K/B connector at the rear +5V@15A, +12V@6A, +3.3V@6A panel [email protected], -12V@1A, +5VSB@1A Keyboard Connector Cap Input Voltage One cap at the rear panel 90 - 132V/180 - 264V selectable

4 7 IRC-306S 6-slot Industrial Node Chassis with NB CD-ROM, FDD and HDD

Features Benefits ◆ Replaceable air filter ◆ For easy cleaning ◆ ON/OFF switch protection cap ◆ Avoid accidental reset of system ◆ K/B connector cap included ◆ For dust-proof for the front K/B connector ◆ One 12cm ball-bearing cooling fan ◆ Better ventilation to enhance system reliability

What's New

Can be mounted in different styles Touch-free ON/OFF & reset switch The rear of IRC-306S IRC-306S allows for vertical and horizontal For security concerns, a switch protection IRC-306S has well-cooling design to expire installation. cap is provided to prevent accidental reset. the heat from the system.

Ordering Guide Engineering Drawing

IRC-306S-06I-135 6-slot node chassis with 6-slot ISA Backplane and 135W power supply IRC-306S-06P4-135 6-slot node chassis with 6-slot PISA bus Backplane and 135W PSU for PCI/ISA application

4 8 IRC-304S Advanced 4-slot Industrial Node Chassis with NB CD-ROM, FDD and HDD

◆ Support one CD-ROM, one FDD and one HDD (all NB type) drive bays

◆ Can be vertically or horizontally mounted, easy to fit into space limited environment

◆ Fan direction changeable

◆ Replaceable air filter for easy cleaning

◆ One On/Off switch protection cap and one touch free reset for secure access

◆ Equipped with one K/B connector cap to prevent the front K/B connector from the dust IRC-304S is a compact and rugged 4-slot node chassis for industrial ◆ One 12cm ball-bearing cooling fan controller in the space limited application. Since CD-ROM is the most provides better ventilation to enhance common device for installing s/w, it is equipped with a notebook PC type system reliability CD-ROM drive for easy installation of the necessary OS or application ◆ Built-in SNP-9F40 65W power supply software.

Its rugged, sturdy, full-sealed and well-cooled steel chassis is designed to withstand shock, dust, humidity, vibration and high temperature in the harsh environment.

General Speaker Input Frequency One 8W speaker 43Hz - 63Hz Construction Heavy-duty steel Standard Color Input Current Industrial dark gray 1.5A max./115V, 0.8A max./230V Air Filter One replaceable air filter at the front Dimension Efficiency door 172(W) x 256.7(D) x 172(H) mm Min. 70% 6.8"(W) x 10.1"(D) x 6.8"(H) Cooling Fan MTBF Reliability One 12cm (86.5cfm) ball-bearing fan Weight Min. 50,000 hours at 25˚C (70˚F) Net: 5kg (11lb) Disk Drive Housing Gross: 5.5kg (12.1lb) Safety External: NB CD-ROMx1+NB FDDx1 CSA/TUV/NRTL/C Internal: NB 2.5" FDDx1+3.5" HDD Backplane 4-slot ISA Backplane Environment Indicator LED indicators for HDD Power Supply (SNP-9F40) Operating Temperature Range 0 to +55˚C Switch Maximum Output One for reset and one for power On/Off 65W Storage Temperature Range with a protection cap 0 to +70˚C Output Voltage & Current Keyboard Connector +5V@4A, +12V@3A, Relative Humidity Standard 5-pin AT K/B connector at the [email protected], [email protected] 5 to 95% non-condensing rear panel Input Voltage Keyboard Connector Cap AC 90 - 264V One cap at the rear panel

4 9 IRC-304S Advanced 4-slot Industrial Node Chassis with NB CD-ROM, FDD and HDD

Features Benefits ◆ Replaceable air filter ◆ For easy cleaning ◆ ON/OFF switch protection cap ◆ Avoid accidental reset of system ◆ K/B connector cap included ◆ For dust-proof for the front K/B connector ◆ One 12cm ball-bearing cooling fan ◆ Better ventilation to enhance system reliability

What's New

12cm fan for better ventilation Touch-free ON/OFF & reset switch Top view of IRC-304S One 12cm ball-bearing fan is equipped to For security reasons, a switch protection It is a magic to install so many components keep well-cooled air inside. cap is provided to prevent accidental reset. within such a compact system.

Ordering Guide Engineering Drawing

IRC-304S-04I-65 4-slot node chassis with 4-slot ISA Backplane and 65W power supply

▲ Notebook type device for IRC-304S

5 0 IRC-404S Compact 4-slot Industrial Node Chassis

IRC-404S is a compact and rugged 4-slot node chassis to be the industrial controller in the space limited application. It is designed for the diskless operation which needs the best reliability and bears no peripherals' errors.

Its rugged, sturdy, full-sealed and well-cooled steel chassis is designed to withstand shock, dust, humidity, vibration and high temperature in the harsh environment.

General Dimension Input Current 110(W) x 218(D) x 195(H) mm 1.5A max./115V, 0.8A max./230V Construction 4.3"(W) x 8.6"(D) x 7.7"(H) Heavy-duty steel Efficiency Weight Min. 70% Air Filter Net: 2.35kg (5.2lb) One replaceable filter inside the chassis Gross: 2.85kg (6.3lb) MTBF Reliability Min. 200,000 hours at 25˚C (70˚F) Cooling Fan Backplane No fans needed 4-slot ISA Backplane Safety CSA/TUV/UL/CE Disk Drive Housing Power Supply (SNP-9F40) One internal 2.5" HDD Environment Maximum Output Indicator Operating Temperature Range LED indicators for HDD and power 65W 0 to +55˚C On/Off Output Voltage & Current +5V@4A, +12V@3A, Storage Temperature Range Switch 0 to +70˚C One for reset and one for power On/Off [email protected], [email protected] Input Voltage Relative Humidity Standard Color 5 to 95% non-condensing Industrial dark gray AC 90 - 264V Input Frequency 43Hz - 63Hz

Engineering Drawing

▲ Rear Side of IRC-404S

5 1 PRA-2182 19" 2U Rack-mount Keyboard Drawer with 12.1" TFT Display

◆ Meet EIA-RS-310C and IEC-297-3 specifications

◆ Power of a high-performance monitor in a compactly integrated 2U enclosure

◆ Anti-glare tempered glass for added protection to LCD screen

◆ Automatic LCD shut off when not in use without shutting down the main system

◆ Simple and polished design will enhance the value of the end-product

◆ 12.1" TFT LCD display, high luminance

◆ Rugged construction for harsh environment operation

PRA-2182 is the industrial drawer that offers many unique maximize usable cabinet space. With built-in analog-to- advantages over the traditional devices. This industrial digital conversion board, the PRA-2182 can be connected monitor keyboard features a large-size monitor in a to any standard VGA graphics card for immediate screen compact 2U unit, occupying only a fraction of the space of display. traditional monitor and keyboard units. The spectacular The monitor keyboard unit has a built-in slide rail and display of an 12.1" LCD screen coupled with a full-size mounts easily onto any 19" cabinet. Simply pull the unit keyboard with built-in pointing device is now available in out to access the system. When closed, the unit lock will only 2U. limit system access and thereby provide certain degree of Designed for 19" rack-mount cabinets in a convenient security. drawer form, PRA-2182 is the most ideal solution to

General Security Lock Environment Front access right lock for system Construction security Operating Temperature Range Heavy-duty steel 0 to +50˚C Power Supply Keyboard/Mouse 26W 100/240V 47-63 Hz auto-switching Storage Temperature Range 108-key keyboard with integrated power supply 0 to +70˚C GildePoint touch pad. Key pad. Option Ordering Guide Flat Panel Touch screen - 12.1" TFT/DSTN 800x600 PR A - 2 1 8 2 - Built-in OSD (on screen display) controls Handle 19" 2U rack-mount keyboard drawer - Automatic flat panel shut-off when Front panel stainless steel handle with 12.1" TFT display monitor is in the closed position Standard Color - 0 - 105º monitor open angle Black, beige Connection (custom colors available for OEM/ODM) Standard AT keyboard, PS/2 mouse and Dimension VGA connectors 482(W) x 446.4(D) x 87.9(H) mm Keyboard Drawer 19"(W) x 17.6"(D) x 3.5"(H) - Built-in side railing for instant installation Weight - Three pull-out stages: drawer locks at Net: 15kg (33lb) 3rd stage (release tabs on side railing) Gross: 16kg (35.2lb) - Total drawer travel distance: 14" Safety CE/FCC class B certification ▲ PRA-2182 in black

5 2 ORION-2004 600W+200W (N+1) Redundant Switching Power Supply

F e a t u r e s Values / Benefits Apply true load-sharing N+1 design High reliability & redundancy Four 200W Hot-swap redundant modules Total 800W for heavy loading system Alarm beeping and LED indicator Easy for maintenance Provide 1.5A for stand-by +5V Meet ATX2.01 Spec. for newest ATX M/B +3.3V on each module Real redundant design for +3.3V output +5 V, + 1 2 V ,+3.3V o/p have OVP design No worry for any DC o/p damage 2 - L a y e r, FR-4, 94-V0 PCB Good reliability for industrial grade PSU Silver plated Germany DIN connector Extra reliability for high current situation Ball bearing NMB fan Good reliability Use 15A/400V power transistor High current tolerance with longer durability 2 pcs of 30A/40V parallel for +5V diode Durability twice better than normal PSU 20A/200V (Fuji D92-02) for +12V diode Durability twice better than normal PSU Varistor installed Absorb more inrush spike Remote sense installed Auto-adjust M/B loading & o/p voltage Output power connector One ATX & one P8P9 connector

ORION-2004 is a "state-of-the-art" design to the The "N+1" load sharing technology is the trend for high- traditional power supply market. It is smart not only in end switching power module. With this feature, the PSU circuit design, but also in the mechanical customers can expand the power on their demand. It design. Besides, it is easy to hot swap the modules. surely meets the growing demand for the mission critical Together with its compactness, it brings a lot of benefits application. to customers in non-stop computing environment.

Specifications Engineering Drawing

Voltage 90V ~ 132V, 180 ~ 264V selectable ◆ I n p u t F r e q u e n c y 47 ~ 63 Hz Current 1 5 A @ 11 5 V, 8A@230V + 5 V + 3 . 3 V + 1 2 V - 5 V - 1 2 V Max. Load 6 0 A 4 8 A 2 0 A 1 A 1 A Min. Load 3 A 0 . 3 A 0 . 5 A 0 A 0 A Max. Wa t t . 5 8 0 W 5 W 1 2 W ◆ DC Output Load Reg. + / - 5 % + / - 4 % + / - 5 % + / - 1 0 % + / - 1 0 % Cross Reg. + / - 5 % + / - 4 % + / - 5 % + / - 1 0 % + / - 1 0 % Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % N o i s e + / - 1 % + / - 1 % + / - 1 % + / - 2 % + / - 2 % ◆ E ff i c i e n c y > 65% ◆ Holdup Ti m e 16ms. at full load ◆ Hi-Pot Te s t 1.5KVRMS, 60sec. from i/p to ground 3.0KVRMS, 60sec. from i/p to o/p ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V + 1 2 V: 13.6V ~ 15.6V Ordering Guide ◆ Over Load Protection Total o/p 110% ~ 130% ● ORION-2004 ◆ M T B F > 100,000hrs 600W+200W (N+1) redundant PSU (total 800W output), with one ATX & one P8P9 output connectors ◆ EMI & Safety Approval T U V, UL, CE, FCC ● ORION-2004-S (for SunSPARC AXmp) ◆ Te m p e r a t u r e / H u m i d i t y Operating : 0 ~ 50˚C, 20 ~ 90%RH Storage : -20 ~ 60˚C, 5 ~ 9 5 % R H 600W+200W (N+1) redundant PSU (total 800W output), with one 24-pin ATX and one 20-pin ATX connectors ◆ Dimension (WxDxH) 100x210x214.1 mm / 4"x8.3"x8.4" ● PFC-Kit-2004 (Optional) 5 3 Passive-kit for ORION-2004 ORION-2003 400W+200W (N+1) Redundant Switching Power Supply

F e a t u r e s Values / Benefits Apply true load-sharing N+1 design High reliability & redundancy Three 200W hot-swap redundant modules Total 600W for heavy loading system Alarm beeping and LED indicator Easy for maintenance Provide 1.5A for stand-by +5V Meet ATX2.01 Spec. for newest ATX M/B +3.3V on each module Real redundant design for +3.3V output +5 V, + 1 2 V ,+3.3V o/p have OVP design No worry for any DC o/p damage 2 - L a y e r, FR-4, 94-V0 PCB Good reliability for industrial grade PSU Silver plated German DIN connector Extra reliability for high current situation Ball-bearing NMB fan Good reliability Use 15A/400V power transistor High current tolerance with longer durability 2 pcs of 30A/40V parallel for +5V diode Durability twice better than normal PSU 20A/200V (Fuji D92-02) for +12V diode Durability twice better than normal PSU Varistor installed Absorb more inrush spike Remote sense installed Auto-adjust M/B loading & o/p voltage Output power connector One ATX & one P8P9 connector

ORION-2003 is a "state-of-the-art" design to the The "N+1" load sharing technology is the trend for high- traditional power supply market. It is smart not only in end switching power module. With this feature, the PSU circuit design, but also in the mechanical customers can expand the power on their demand. It design. Besides, it is easy to hot swap the modules. surely meets the growing demand for the mission critical Together with its compactness, it brings a lot of benefits application. to customers in non-stop computing environment.

Specifications Engineering Drawing

Voltage 90V ~ 132V, 180 ~ 264V selectable ◆ I n p u t F r e q u e n c y 47 ~ 63 Hz Current 9A @ 11 5 V , 5A@230V + 5 V + 3 . 3 V + 1 2 V - 5 V - 1 2 V Max. Load 4 0 A 3 2 A 1 4 A 1 A 1 A Min. Load 3 A 0 . 3 A 0 . 5 A 0 A 0 A Max. Wa t t . 3 8 0 W 5 W 1 2 W ◆ DC Output Load Reg. + / - 5 % + / - 4 % + / - 5 % + / - 1 0 % + / - 1 0 % Cross Reg. + / - 5 % + / - 4 % + / - 5 % + / - 1 0 % + / - 1 0 % Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % N o i s e +/-1% +/-1% + / - 1 % + / - 2 % + / - 2 % ◆ E ff i c i e n c y > 65% ◆ Holdup Ti m e 20ms. at full load ◆ Hi-Pot Te s t 1.5KVRMS, 60sec. from i/p to ground 3.0KVRMS, 60sec. from i/p to o/p ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V Ordering Guide + 1 2 V: 13.6V ~ 15.6V ◆ Over Load Protection Total o/p 110% ~ 130% ● ORION-2003 ◆ M T B F > 100,000hrs 400W+200W (N+1) redundant PSU (total 600W output), with one ATX & one P8P9 output connectors ◆ EMI & Safety Approval T U V, UL, CE, FCC ◆ Te m p e r a t u r e / H u m i d i t y Operating : 0 ~ 50˚C, 20 ~ 90%RH Storage : -20 ~ 60˚C, 5 ~ 9 5 % R H ◆ Dimension (WxDxH) 100x210x170 mm / 4"x8.3"x6.7"

5 4 ORION-4005/3005 400W+400W/300W+300W Horizontal Type ATX Redundant Power Supply

Features Values / Benefits ORION-4005 is a horizontal type dual Apply true load-sharing N+1 design High reliability & redundancy PS/2 redundant power supply with Two 400W hot-swap redundant modules Total 800W for heavy loading system ATX (Ve r. 2.01) output for "Mission Alarm beeping and LED indicator Easy for maintenance Critical" applications. Pass the 72 hrs 400W load burn-in test Real & full 400W redundant PSU The power supply is designed with Provide 1A for stand-by +5V Meet ATX2.01 for newest ATX M/B separate AC inputs to get zero down +3.3V on each module Real redundant design for +3.3V output time for real-time disaster recovery Each DC o/p voltage has OCP design No worry for any DC o/p damage and the remote DC sense to have the +5 V, + 1 2 V ,+3.3V o/p have OVP design No failure on each DC o/p short test best reliability for the non-stop Dual AC input AC input redundancy for safety computing systems. 2 - L a y e r, FR-4, 94-V0 PCB Good reliability for industrial grade PSU Ball-bearing NMB fan Good reliability Use 3A components for -5V / -12V Suitable for CTI systems Ordering Guide Use 15A/400V power transistor High current tolerance w/ longer durability 2 pcs of 30A/40V parallel for +5V diode Durability twice better than normal PSU ● ORION-4005 20A/200V (Fuji D92-02) for +12V diode Durability twice better than normal PSU 400W+400W dual PS/2 type ATX redundant power supply Varistor installed Absorb more inrush spike ● ORION-3005 Remote sense installed Auto-adjust M/B loading & o/p voltage 300W+300W dual PS/2 type ATX redundant power supply

Specifications Engineering Drawing Voltage AC 90 ~ 132V, 180 ~ 264V selectable ◆ Input F r e q u e n c y 47 ~ 63 Hz Current 9 A @ 11 5 V, 5A@230V + 5 V + 1 2 V + 3 . 3 V - 5 V - 1 2 V Max. Load 5 0 A 1 5 A 3 0 A 1 . 5 A 1 . 5 A Min. Load 3 A 1 A 0 A 0 A 0 A Max. Wa t t . 3 7 0 W 7 . 5 W 1 8 W ◆ DC Output Load Reg. + / - 5 % + / - 5 % + / - 5 % + / - 5 % + / - 5 % Cross Reg. + / - 5 % + / - 5 % + / - 5 % + / - 1 0 % + / - 5 % Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % N o i s e + / - 1 % + / - 1 % + / - 1 % + / - 2 % + / - 2 % ◆ E ff i c i e n c y > 70% ◆ Holdup Ti m e 20ms. at full load ◆ Hi-Pot Te s t 1.5KVRMS, 60sec. from i/p to ground 3.0KVRMS, 60sec. from i/p to o/p ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V + 1 2 V:13.6V ~ 15.6V ◆ Over Load Protection Total o/p 110% ~ 130% ◆ M T B F > 100,000hrs ◆ Te m p e r a t u r e / H u m i d i t y Operating : 0 ~ 50˚C, 20 ~ 90%RH Storage : 0 ~ 70˚C, 5 ~ 95%RH 5 5 ◆ Dimension (WxDxH) 353x201x105 mm / 13.9"x7.9"x4.1" ORION-3002 Advanced 300W PS/2 Type Hot-Swap Redundant Power Supply

PS/2 type PSU is the default standard for all chassis manufacturers. Keeping the same size makes it easy for the PSU suppliers to find the market. As the computing power is enhanced, the demand for higher power output comes. It is easy to increase the power output by extending its size, but not easy to have redundant capability and keep it in an exact PS/2 size at the same time. ORION-3002 shows the technology to meet customers' requirements without sacrificing any advantages of traditional PS/2 power supplies. With the "Dual Redundant" design, the total power output of ORION-3002 can be more than 600W and has 300W output when any module fails.

Ordering Guide Features Values / Benefits Apply true load-sharing N+1 design High reliability & redundancy ● ORION-3002-X Two 300W hot-swap redundant modules Total 600W for heavy loading system Advanced 300W PS/2 type hot-swap redundant power supply with ATX output Alarm beeping and LED indicator Easy for maintenance ● ORION-3002-T Provide 2A for stand-by +5V Meet ATX2.01 Spec. for newest ATX M/B Advanced 300W PS/2 type hot-swap +3.3V on each module Real redundant design for +3.3V output redundant power supply with AT output +5V,+12V,+3.3V o/p have OVP design No worry for any DC o/p to damage ● ORION-3002-R 2-Layer, FR-4, 94-V0 PCB Good reliability for industrial grade PSU Advanced 300W PS/2 type hot-swap Ball-bearing fan Good reliability redundant power supply for RAID Remote sense installed Auto-adjust M/B loading & o/p voltage PS: Front loading type power supply available

Specifications Engineering Drawing Voltage AC 90 ~ 132V, 180 ~ 264V Auto-range ◆ Input F r e q u e n c y 47 ~ 63Hz Current 6 A @ 11 5 V, 3A@230V + 5 V + 3 . 3 V + 1 2 V - 5 V - 1 2 V Max. Load 3 6 A 1 6 A 1 4 A 0 . 5 A 1 A Min. Load 3 A 1 A 1 A 0 A 0 A Max. Wa t t . 2 8 0 W 2 . 5 W 6 W ◆ DC Output Load Reg. + / - 5 % + / - 5 % + / - 5 % + / - 1 0 % + / - 1 0 % Cross Reg. + / - 5 % + / - 5 % + / - 5 % + / - 1 0 % + / - 1 0 % Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % N o i s e + / - 1 % + / - 1 % + / - 1 % + / - 2 % + / - 2 % ◆ E ff i c i e n c y > 65% ◆ Holdup Ti m e 20ms. at full load ◆ Hi-Pot Te s t 1.5KVRMS, 60sec. from i/p to ground 3.0KVRMS, 60sec. from i/p to o/p ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V/+12V: 13.6V ~ 15.6V ◆ Over Load Protection Total o/p 120% ~ 140% ◆ M T B F > 100,000hrs ◆ Safety Approval UL, TUV, CE, FCC ◆ Te m p e r a t u r e / H u m i d i t y Operating : 0 ~ 50˚C, 20 ~ 90%RH Storage : -20 ~ 60˚C, 5 ~ 95%RH ◆ Dimension (WxDxH) 86x175x150 mm / 3.4"x6.9"x5.9" 5 6 ORION-2253 Advanced 450W+225W (N+1) PS/2 Type Hot-Swap Redundant Power Supply

PS/2 type PSU is the default standard for all chassis manufacturers. Keeping the same size makes it easy for the PSU suppliers to find the market. As the computing power is enhanced, the demand for higher power output comes. It is easy to increase the power output by extending its size, but not easy to have redundant capability and keep it in an exact PS/2 size at the same time. ORION-2253 shows the technology to meet customers' requirements without sacrificing any advantages of traditional PS/2 power supplies. Wi t h the "N+1" design, the total power output of ORION- 2253 can be more than 675W and has 450W output when any module fails.

Ordering Guide F e a t u r e s Values / Benefits Apply true load-sharing N+1 design High reliability & redundancy ● ORION-2253 Three 225W hot-swap redundant modules Total 675W for heavy loading system Advanced 450W+225W (N+1) PS/2 type Alarm beeping and LED indicator Easy for maintenance hot-swap redundant power supply with ATX output Provide 2.5A for stand-by +5V Meet ATX2.03 Spec. for newest ATX M/B +3.3V on each module Real redundant design for +3.3V output +5 V, + 1 2 V ,+3.3V o/p have OVP design No worry for any DC o/p damage 2 - L a y e r, FR-4, 94-V0 PCB Good reliability for industrial grade PSU Ball-bearing fan Good reliability Varistor installed Absorb more inrush spike Remote sense installed Auto-adjust M/B loading & o/p voltage

Specifications Engineering Drawing

Voltage AC 95 ~ 132V, 180 ~ 264V selectable ◆ Input F r e q u e n c y 47 ~ 63 Hz Current 1 2 A @ 11 5 V, 6A@230V + 5 V + 3 . 3 V + 1 2 V - 5 V - 1 2 V Max. Load 4 5 A 2 5 A 2 5 A 1 A 2 A Min. Load 3 A 0 A 1 A 0 A 0 A Max. Wa t t . 4 1 0 W 5 W 2 4 W ◆ DC Output Load Reg. + / - 5 % + / - 6 % + / - 5 % + / - 1 0 % + / - 1 0 % Cross Reg. + / - 5 % + / - 6 % + / - 5 % + / - 1 0 % + / - 1 0 % Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % N o i s e + / - 1 % + / - 1 % + / - 1 % + / - 2 % + / - 2 % ◆ E ff i c i e n c y > 75% ◆ Holdup Ti m e 16ms. at full load ◆ Hi-Pot Te s t 1.5KVRMS, 60sec. from i/p to ground 3.0KVRMS, 60sec. from i/p to o/p ◆ Over Power Protection + 5 V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V + 1 2 V: 13.6V ~ 15.6V ◆ Over Load Protection Total o/p power over 120% ◆ M T B F > 167,000hrs ◆ Safety Approval UL, TUV, CE, FCC ◆ Te m p e r a t u r e / H u m i d i t y Operating : 0 ~ 50˚C, 20 ~ 90%RH Storage : -20 ~ 60˚C, 5 ~ 95%RH 5 7 ◆ Dimension (WxDxH) 86x181x150 mm / 3.4"x7.1"x5.9" ORION-2302 230W for 2U Slim Type ATX Hot-Swap Redundant Power Supply

ORION-2302 is a compact redundant power supply for "Mission Critical" applications. As "High Availability" becomes a common requirement, now the redundant power supply is part of non-stop computers. With its compact size, ORION-2302 can be easily applied to get great added value of "High Availability" without changing any mechanism or redesigning systems.

Specifications F e a t u r e s The most compact hot swap redundant PSU to fit into a Voltage AC 95 ~ 132V, 180 ~ 264V selectable limited space, suitable for 2U chassis ◆ Input F r e q u e n c y 47 ~ 63 Hz Two 230W hot-swap redundant modules provide 460W output Current 4A @ 11 5 V , 2A@230V for the new computers high-frequency CPUs + 5 V + 1 2 V + 3 . 3 V - 5 V - 1 2 V Provide 1.5A for standby +5V Max. Load 2 5 A 1 3 A 1 5 A 0 . 5 A 1 A High reliable ball bearing sensitive fan Min. Load 3 A 1 A 0 A 0 A 0 A Equipped with 4-ear brackets for fixing the PSU easily and Max. Wa t t . 2 1 0 W 1 4 . 5 W f l e x i b l y ◆ DC Output Load Reg. + / - 5 % + / - 6 % + / - 5 % + / - 1 0 % + / - 1 0 % Alarm beeping and LED indicator of defective module for Cross Reg. + / - 5 % + / - 6 % + / - 5 % + / - 1 0 % + / - 1 0 % field replacement directly Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % Enhanced swappable fan to get high security for 100% R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % mission critical application N o i s e + / - 1 % + / - 1 % + / - 1 % + / - 2 % + / - 2 % ◆ E ff i c i e n c y > 75% at full load ◆ Holdup Ti m e 16ms. at full load ◆ Hi-Pot Te s t 1.5KVRMS, 60sec. from i/p to ground 3.0KVRMS, 60sec. from i/p to o/p ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V/+12V: 12.6V ~ 15.6V + 3 . 3 V: 3.7V ~ 4.5V ◆ Over Power Protection Total o/p 120% ◆ M T B F > 176,000hrs Engineering Drawing ◆ Safety Approval UL, CUL, TUV, CE ◆ Te m p e r a t u r e / H u m i d i t y Operating : 0 ~50˚C, 20 ~90%RH Storage : -20 ~60˚C, 5 ~95%RH ◆ Dimension (WxDxH) 86x181x109 mm / 3.4"x7.1"x4.3"

Ordering Guide

● ORION-2302 230W for 2U slim type ATX redundant PSU

5 8 ORION-250S Slim Type of 250W ATX Power Supply

Specifications Voltage AC 90 ~ 132V, 180 ~ 264V selectable ◆ Input F r e q u e n c y 47 ~ 63 Hz Current 6A @ 11 5 V , 3A@230V + 5 V + 1 2 V + 3 . 3 V - 1 2 V - 5 V ◆ DC Output Max. Load 3 0 A 1 0 A 1 5 A 0 . 5 A 0 . 5 A Min. Load 3 A 1 A 1 A 0 A 0 A ◆ E ff i c i e n c y > 7 5 % ◆ Hold up Ti m e 16ms. at full load 1.5K VRMS, 60sec. from i/p to ground ◆ Hi-Pot Te s t 3.0K VRMS, 60sec. from i/p to o/p ◆ Over Voltage Protection +5 V : 5.15V ~ 6.45V/+12V: 12.6V ~ 15.6V ◆ Over Load Protection When over 120% ORION-250S is a high output PSU for 1U Operating : 10 ~ 50˚C ◆ Te m p e r a t u r e / H u m i d i t y chassis. It's the best choice for your compact Storage : -20 ~ 60˚C system applications. ◆ Safety Approval UL, TUV, CE, FCC ◆ Dimension (WxDxH) 100x190x40.5 mm / 3.94"x7.5"x1.6"

F e a t u r e s A p p l i c a t i o n Ordering Guide 40.5mm high, the best solution 1U chassis 250W high output for 1U solution Compact node chassis ● ORION-250S Total power of +5V &+3.3V is 150W 250W slim ATX PSU for 1U Chassis Provide OVP, OLP, SCP protection

ORION-300S Slim Type of 300W ATX Power Supply

Specifications Voltage AC 90 ~ 132V, 180 ~ 264V selectable ◆ Input F r e q u e n c y 47 ~ 63 Hz Current 4 A @ 11 5 V, 2A@230V + 5 V + 1 2 V + 3 . 3 V - 1 2 V - 5 V ◆ DC Output Max. Load 3 0 A 1 4 A 1 5 A 1 A 0 . 5 A Min. Load 3 A 1 A 1 A 0 A 0 A ◆ E ff i c i e n c y > 7 5 % ◆ Hold up Ti m e 16ms. at full load 1.5K VRMS, 60sec. from i/p to ground ◆ Hi-Pot Te s t 3.0K VRMS, 60sec. from i/p to o/p ◆ Over Voltage Protection +5 V : 5.15V ~ 6.45V/+12V: 12.6V ~ 15.6V ORION-300S is the smallest 300W ATX PSU ◆ Over Load Protection When over 120% in the world. Its fancy and smart design makes Operating : 10 ~ 50˚C ◆ Te m p e r a t u r e / H u m i d i t y Storage : -20 ~ 60˚C it possible to integrate those compact systems ◆ Safety Approval UL, TUV, CE, FCC into your applications. ◆ Dimension (WxDxH) 100x210x70 mm / 3.94"x8.3"x2.8"

F e a t u r e s A p p l i c a t i o n Ordering Guide High power output for 2U solution 2U chassis Total power of +5V &+3.3V is 150W Compact node chassis ● ORION-300S Provide OVP, OLP, SCP protection 300W slim ATX PSU for 2U Chassis 5 9 ORION-300DX -48V & 24V DC Input PS/2 Type DC/DC Converter with ATX Output

Specifications

Vo l t a g e DC -40V ~ -72V for -48V input DC 19V ~ 32V for 24V input ◆ I n p u t 10A@-48V DC input C u r r e n t 20A@24V DC input + 5 V + 3 . 3 V + 1 2 V - 5 V - 1 2 V Max. Load 3 0 A 1 5 A 1 5 A 2 A 2 A Min. Load 2 A 0 A 0 . 1 A 0 A 0 A Max. Wa t t . 1 5 0 W 1 8 0 W 1 0 W 2 4 W ◆ DC Output Load Reg. + / - 3 % + / - 2 % + / - 5 % + / - 2 % + / - 2 % Cross Reg. + / - 5 % + / - 5 % + / - 5 % + / - 1 0 % + / - 1 0 % Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % F e a t u r e s A p p l i c a t i o n N o i s e + / - 1 % + / - 1 % + / - 1 % + / - 2 % + / - 2 % -48 or +24 V DC input, ATX output Tr u c k ◆ E ff i c i e n c y > 65% Provide 1.2A for stand-by +5V Te l e c o m m u n i c a t i o n ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V Provide +5V o/p to have OVP design Remote control unit ◆ Over Load Protection Total o/p 110% ~ 130% -20˚C can start up ◆ M T B F > 150,000 hrs 0 ~ 70˚C (-20˚C can start up) ◆ Te m p e r a t u r e / H u m i d i t y The maximum 300W output power Ordering Guide should be under the cabinet ● ORION-300DX/48 temperature 30˚C 300W PS/2 type -48V DC/DC converter with ATX output ◆ Safety Approval T U V, CSA, NRTL/C, UL ● ORION-300DX/24 ◆ Dimension (WxDxH) 150x140x86 mm / 5.9"x5.5"x3.4" 300W PS/2 type 24V DC/DC converter with ATX output BPS-250RDDX/48 -48V Input 450W PS/2 Type DC/DC Hot-Swap Redundant Power Supply

Specifications Voltage DC -40 to -56V ◆ Input Current 8 A + 5 V + 3 . 3 V + 1 2 V - 5 V - 1 2 V Max. Load 3 0 A 1 5 A 1 4 A 0 . 5 A 0 . 5 A Min. Load 3 A 3 A 1 A 0 A 0 A Max. Wa t t . 2 2 0 W 1 0 W ◆ DC Output Load Reg. + / - 5 % + / - 5 % + / - 5 % + / - 1 0 % + / - 1 0 % Cross Reg. + / - 5 % + / - 5 % + / - 5 % + / - 1 0 % + / - 1 0 % Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % N o i s e + / - 1 % + / - 1 % + / - 1 % + / - 2 % + / - 2 % ◆ E ff i c i e n c y > 75% at full load F e a t u r e s A p p l i c a t i o n ◆ Holdup Ti m e 16ms. at full load AT or ATX output as optional Telecommunication ◆ Hi-Pot Te s t 1.5KVRMS, 60sec. from i/p to ground Provide OVP, OLP protection e n v i r o n m e n t 3.0KVRMS, 60sec. from i/p to o/p Provide 1A for +5V VSB Remote control unit ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V/+12V: 12.6V ~ 15.6V ◆ Over Load Protection Total o/p 130% ~ 150% Ordering Guide ◆ M T B F > 167,000 hrs ◆ Safety Approval UL, CUL, TUV, CE ● BPS-250RDD/48 ◆ Te m p e r a t u r e / H u m i d i t y Operating : 10 ~ 50˚C, 20 ~ 90%RH -48V DC input PS/2 type hot-swap redundant PSU Storage : -20 ~ 60˚C, 5 ~ 95%RH ● BPS-250RDDX/48 ◆ 150x140x86 mm / 5.9"x5.5"x3.4" (RDD) -48V DC input PS/2 type hot-swap ATX redundant PSU Dimension (WxDxH) 150x175x86 mm / 5.9"x6.9"x3.4" (RDDX) 6 0 ORION-450AX Full 450W Single PS/2 Type ATX Power Supply with Auto-range Input

Specifications Voltage AC 95 ~ 132V, 185 ~ 264V Auto-range ◆ Input F r e q u e n c y 47 ~63 Hz Current 7A @ 11 5 V , 4A@230V + 5 V + 3 . 3 V + 1 2 V - 5 V - 1 2 V Max. Load 4 0 A 2 8 A 1 7 A 0 . 5 A 1 . 5 A Min. Load 2 A 0 A 0 . 2 A 0 A 0 A Max. Wa t t . 2 2 5 W 2 0 4 W 2 . 5 W 1 8 W ◆ DC Output Load Reg. + / - 5 % + / - 5 % + / - 5 % + / - 5 % + / - 1 0 % Cross Reg. + / - 5 % + / - 5 % + / - 5 % + / - 1 0 % + / - 5 % Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % + / - 1 % ORION-450AX is a brand new design for higher N o i s e + / - 1 % + / - 1 % + / - 1 % + / - 2 % + / - 2 % output ATX PSU. It is designed to meet the ◆ E ff i c i e n c y > 70% at full load demand of high current support, such as servers ◆ Holdup Ti m e 16.7ms. at full load or disk-array. ◆ Hi-Pot Te s t 1.5KVRMS, 60sec. from i/p to ground 3.0KVRMS, 60sec. from i/p to o/p ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V/+3.3V: 4.0V ~ 4.5V F e a t u r e s A p p l i c a t i o n + 1 2 V: 13.5V ~ 15.5V Full 450W output design Internet server ◆ Over Circuit Protection Shutdown power supply Auto-range AC input High-end Rack-mount ◆ Over Load Protection Total o/p 110% ~ 130% + 5 V, + 1 2 V,+3.3V OVP design c o m p u t e r ◆ M T B F > 100,000hrs One ATX and one P9 connector ◆ Safety Approval UL, CSA, TUV, CE, FCC ◆ Te m p e r a t u r e / H u m i d i t y Operating : 0 ~ 50˚C, 20 ~ 90%RH Storage : -20 ~ 60˚C, 5 ~ 95%RH Ordering Guide ◆ Dimension (WxDxH) 150x140x86 mm / 5.9"x5.5"x3.4" ● ORION-450AX Full 450W PS/2 type ATX PSU with Auto-range input ORION-330A Full 330W Single PS/2 Type AT Power Supply with Auto-range Input Specifications Voltage AC 95 ~ 132V,190 ~ 264V Auto-range ◆ Input F r e q u e n c y 47 ~ 63 Hz Current 1 0 A @ 11 5 V, 5A@230V + 5 V + 1 2 V - 5 V - 1 2 V Max. Load 3 0 A 1 4 A 0 . 5 A 1 A Min. Load 2 A 0 . 2 A 0 A 0 A Max. Wa t t . 1 5 0 W 1 6 8 W 2 . 5 W 1 2 W ◆ DC Output Load Reg. + / - 5 % + / - 5 % + / - 5 % + / - 1 0 % Cross Reg. + / - 5 % + / - 5 % + / - 1 0 % + / - 5 % Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % ORION-330A is the most cost effective PSU R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % designed to fit your mid-grade server that needs N o i s e + / - 1 % + / - 1 % + / - 2 % + / - 2 % ◆ more power than that of PC. It is mostly adopted in E ff i c i e n c y > 70% at full load ◆ the rack-mount systems. Holdup Ti m e 16.7ms. at full load ◆ Hi-Pot Te s t 1.5KVRMS, 60sec. from i/p to ground 3.0KVRMS, 60sec. from i/p to o/p F e a t u r e s A p p l i c a t i o n ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V/+3.3V: 4.0V ~ 4.5V Full 330W output design Rack-mount chassis + 1 2 V: 13.5V ~ 15.5V Auto-range AC input Factory environment ◆ Over Circuit Protection Shutdown power supply Provide OVP, OCP protection ◆ Over Load Protection Total o/p 110% ~ 130% ◆ M T B F > 100,000 hrs Ordering Guide ◆ Safety Approval UL, CSA, TUV, CE, FCC ◆ Operating : 0 ~ 50˚C, 20 ~ 90%RH ● Te m p e r a t u r e / H u m i d i t y ORION-330A Storage : -20 ~ 60˚C, 5 ~ 95%RH 6 1 Full 330W PS/2 type AT PSU with Auto-range input ◆ Dimension (WxDxH) 150x140x86 mm / 5.9"x5.5"x3.4" PW-380/250 Standard 380W/250W PS/2 Type Power Supply

Specifications Voltage AC 95 ~ 132V, 185 ~ 264V selectable F r e q u e n c y 47 ~ 63 Hz ◆ I n p u t 10 A @ 11 5 V , 5A@230V for 380W C u r r e n t 8A @ 11 5 V , 4A@230V for 250W + 5 V + 1 2 V - 5 V - 1 2 V Max. Load 3 6 A 1 6 A 0 . 5 A 0 . 5 A ◆ DC 3 8 0 W Output Min. Load 3 A 1 A 0 A 0 A Max. Load 2 5 A 1 0 A 0 . 5 A 0 . 5 A 2 5 0 W Min. Load 1 A 0 . 4 A 0 A 0 A ◆ E ff i c i e n c y > 70% ◆ Hold up time 16ms at full-load PW-380/250 is a typical PS/2 power supply that ◆ Hi-Pot Te s t 1.5K VRMS, 60 sec from i/p to ground has been used for several years. With its steady 1.5K VRMS, 60 sec from i/p to o/p quality and reliability, it is still extensively adopted ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V and receives high popularity. + 1 2 V: 13.6V ~ 15.6V ◆ Over Current Protection + 5 V, +3.3V: 110% ~ 130% + 1 2 V: 120% ~ 150% ◆ Over Load Protection Total o/p 110% ~ 130% Ordering Guide ◆ M T B F > 50,000hrs ● PW-380 ◆ Safety Approval UL, CSA, TUV, CE, CB, FCC 380W PS/2 type AT PSU Operating : 0 ~ 50˚C, 20 ~ 90%RH ◆ Te m p e r a t u r e / H u m i d i t y ● PW-380A Storage : -20 ~ 60˚C, 5 ~ 95%RH 380W PS/2 type Auto-range AT PSU ◆ Dimension (WxDxH) 150x140x86 mm / 5.9"x5.5"x3.4" ● PW-250 250W PS/2 type AT PSU PW-300ATX Standard 300W PS/2 Type Power Supply F e a t u r e s A p p l i c a t i o n Full 300W output design Rack-mount chassis Provide OVP, OCP, OLP protection Factory environment

Specifications Voltage AC 85 ~ 132V, 185 ~ 254V selectable ◆ I n p u t F r e q u e n c y 47 ~ 63 Hz C u r r e n t 1 0 A @ 11 5 V, 5A@230V for 300W + 5 V + 1 2 V + 3 . 3 V - 5 V - 1 2 V Max. Load 3 0 A 1 4 A 2 2 A 0 .8 A 1 A ◆ DC Output Min. Load 2 A 0 . 2 A 0 A 0 A 0 A Max. Watt (+5V)+(+3.3V) < 140W ◆ E ff i c i e n c y > 70% ◆ Hold up time 16ms at full-load ◆ Hi-Pot Te s t 1.5K VRMS, 60 sec from i/p to ground Because of its good reliability and quality for AT X 1.5K VRMS, 60 sec from i/p o/p functionality. PW-300ATX is the best seller among ◆ Over Voltage Protection + 5 V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V + 1 2 V: 13.6V ~ 15.6V all PSUs. ◆ Over Current Protection + 5 V, +3.3V: 110% ~ 130% + 1 2 V: 120% ~ 150% ◆ Over Load Protection Total o/p 110% ~ 130% Ordering Guide ◆ M T B F > 40,000hrs ◆ Safety Approval UL, CSA, TUV, CE, CB, FCC ● PW-300ATX ◆ Te m p e r a t u r e / H u m i d i t y Operating : 0 ~ 50˚C, 20 ~ 90%RH 300W PS/2 type ATX PSU Storage : -20 ~ 60˚C, 5 ~ 95%RH ◆ Dimension (WxDxH) 150x140x86 mm / 5.9"x5.5"x3.4" 6 2 BPS-7004/24/12 70W Open Frame +24V or +12V DC to DC Power Supply

Specifications

Voltage DC 18V to 30V for 24V input ◆ Input DC 10V to 18V for 12V input Current 4 A + 5 V + 1 2 V - 5 V - 1 2 V Max. Load 7 A 2 . 5 A 0 . 3 A 0 . 3 A Min. Load 3 A 1 A 0 A 0 A Load Reg. + / - 5 % + / - 5 % + / - 1 0 % + / - 1 0 % ◆ DC Output Cross Reg. + / - 5 % + / - 5 % + / - 1 0 % + / - 1 0 % Line Reg. + / - 1 % + / - 1 % + / - 1 % + / - 1 % R i p p l e + / - 1 % + / - 1 % + / - 1 % + / - 1 % BPS-7004 is a well designed PC PSU for those N o i s e + / - 1 % + / - 1 % + / - 2 % + / - 2 % applications to equipment for boat, mobile and ◆ E ff i c i e n c y > 70% at full load truck. Without the possibility of fan failure, it is ◆ Holdup Ti m e 16ms. at full load more stable and reliable than any others. 1.5KVRMS, 60sec. from i/p to ground ◆ Hi-Pot Te s t 3.0KVRMS, 60sec. from i/p to o/p ◆ Over Voltage Protection +5 V : 5.15V ~ 6.45V/+12V: 12.6V ~ 15.6V F e a t u r e s A p p l i c a t i o n ◆ Over Load Protection Total o/p 130% ~ 150% Max. output 70W Compact chassis ◆ M T B F > 50,000hrs Open frame design to save space E q u i p m e n t ◆ Safety Approval UL, CUL, TUV, CE Provide OVP, OLP protection Panel PC Operating : 10 ~ 50˚C, 20 ~ 90%RH ◆ Te m p e r a t u r e / H u m i d i t y Storage : -20 ~ 60˚C, 5 ~ 95%RH ◆ Dimension (WxDxH) 80.6x127x50 mm / 3.2"x5"x2" Ordering Guide

● BPS-7004/24 70W open frame 24V DC/DC converter ● BPS-7004/12 70W open frame 12V DC/DC converter SNP-9F40 65W Universal Input Open Frame Power Module

Specifications Voltage AC 90 ~ 264V ◆ Input F r e q u e n c y 47 ~ 63 Hz Current 1 . 5 A @ 11 5 V, 0.8A@230V + 5 V + 1 2 V - 5 V - 1 2 V Max. Load 4 A 3 A 0 . 3 A 0 . 3 A ◆ DC Output Min. Load 0 A 0 A 0 A 0 A Max. Wa t t . 2 0 W 3 6 W 1 . 5 W 3 . 6 W ◆ E ff i c i e n c y > 7 0 % SNP-9F40 is an open frame PSU used in those ◆ Holdup Ti m e 16ms. at full load compact machine or equipment. It has been in ◆ Hi-Pot Te s t 1.5KVRMS, 60sec. from i/p to ground the market for a long time because of its good 3.0KVRMS, 60sec. from i/p to o/p reliability and quality. ◆ Over Voltage Protection C r o w b a r, Trip point 6.2V +/-0.5V ◆ Over Circuit Protection Auto recover ◆ Over Load Protection Fold back F e a t u r e s A p p l i c a t i o n ◆ M T B F 2 8 1 , 0 0 0 h r s Universal AC input Compact chassis Operating : 0 ~ 50˚C, 20 ~ 90%RH Easy to install Equipment ◆ Te m p e r a t u r e / H u m i d i t y Storage : -20 ~ 60˚C, 5 ~ 95%RH Long life cycle Panel PC ◆ Safety Approval T U V, CSA, NRT L / C ◆ Dimension (WxDxH) 127x76.2x36 mm / 5"x3"x1.4" Ordering Guide

● 6 3 SNP-9F40 65W universal input power supply ORION-150AX Slim Type of 150W ATX Power Supply

Specifications Voltage AC 90 ~135V, 180 ~260V Auto-range ◆ Input F r e q u e n c y 47 ~ 63 Hz Current 5A @ 11 5 V , 2.5A@230V + 5 V + 1 2 V + 3 . 3 V - 1 2 V - 5 V ◆ DC Output Max. Load 1 0 A 6 A 6 A 1 A 0 . 2 A Min. Load 1 A 1 A 1 A 0 A 0 A ◆ E ff i c i e n c y > 60% ◆ Hold up Ti m e 16ms. at full load 1.5K VRMS, 60sec. from i/p to ground ◆ Hi-Pot Te s t 3.0K VRMS, 60sec. from i/p to o/p ◆ Over Voltage Protection + 5 V: 5.5V ~ 7V/+3.3V: 4.0V ~ 4.5V + 1 2 V: 13.5V ~ 16V ORION-150AX is the smallest 150W AT X ◆ Over Load Protection 110% ~150% PSU in the world. Its fancy and smart design Operating : 10 ~ 50˚C makes those compact systems available in ◆ Te m p e r a t u r e / H u m i d i t y Storage : -20 ~ 60˚C your applications. ◆ Safety Approval UL, TUV, CE, FCC ◆ Dimension (WxDxH) 100x190x40.5 mm / 3.94"x7.5"x1.6" F e a t u r e s A p p l i c a t i o n Ordering Guide 40.5mm high, the best solution 1U chassis 9 5 ~ 1 3 5 V, 180~265 Auto-range input Compact node chassis ● ORION-150AX PFC function as optional Slim type of 150W ATX PSU with Auto-range input Provide OVP, OLP, SCP protection

ORION-48T -48V DC Output Power Supply Tester

ORION-48T is designed for those engineers who need 48V power source for system testing. By using so many batteries to get the 48V power source in our laboratory is not easy. The ORION- 48T is just what engineers need for their application.

Ordering Guide F e a t u r e s A p p l i c a t i o n Input voltages: 11 0 V / 2 2 0 V Testing equipment ● ORION-48T -48V DC power supply tester Output voltage: -48V DC Max. output: 300W

6 4 18-bit TFT panel Interface

Parallel port

Power connector

NS Geode Gx1 low-power CPU

Licensed BIOS Ultra DMA/33 IDE channel PC/104 Interface

Two USB ports

Dual Intel¨ 10/100 Base-TX RS-232 fast Ethernet

PS/2 K/B & Mouse Audio port Reset VGA port IDE connector Realtek Ethernet chip (on rear side) Parallel port FDD port 168-pin DIMM socket Winbond I/O chip Four COM RS-232

External power connector

10/100 Base-T Ethernet port Intel¨ 430TX south bridge Intel¨ 430TX north bridge VGA port Panel display port PS/2 Mouse connector External K/B connector PS/2 K/B connector

Licensed BIOS DOC socket for CPU RTC battery C&T69000 VGA chip Ultra DMA/33 IDE connector FDD port Intel¨ 440BX south bridge

168-pin DIMM socket Parallel port Headers for USB port

COM1/RS232 COM2/RS232 Intel¨ 440BX north bridge PS/2 mouse connector Panel display port Socket 370 for Celeronª processor VGA port

I/O decoder DOC socket PS/2 KB connector

Licensed AMI BIOS C&T 69000 VGA chip FDD port Parallel port RS-232

168-pin DIMM socket Power connector

Intel¨ 815E chip PS/2 K/B & Mouse 4MB display cache Audio

VGA port Two Ultra DMA/100 IDE

LAN Rj45 Intel¨ FWH USB port

Socket370 for Pentium¨ III Intel¨ ICH2 chip or Celeronª Processor ATX power control ATI Rage PRO AGP Two IDE connectors Three 168-pin DIMM sockets RTC battery

FDD port Parallel port

RS232

PS/2 Mouse connector Licensed AMI BIOS VGA port DOC socket PS/2 K/B connector

ALi M1541 north bridge USB port ZIF socket for CPU 512 KB cache memory ALi M1543C south bridge External K/B connector External power connector 4MB VRAM Four 168-pin DIMM sockets Two IDE connectors External power connector Intel¨ 440BX south bridge

FDD port PIO port

COM1/RS232 Panel display port PS/2 mouse VGA port COM2/RS232 DS1687 real Y2K RTC

PS/2 K/B connector

USB port DOC socket PC/104 connector Socket 370 for Pentium¨ III or Celeronª processor Intel¨ 440BX north bridge C&T 69000 display chip Power management Two Ultra ATA/33/66 IDE VGA cache memory Two 168-pin DIMM sockets Intel¨ 82559 10/100 Base-T Ethernet Ultra 160 SCSI port

FDD port PIO port ATX controller RS232 LAN/RJ-45

VGA port

PS/2 Mouse connector

PS/2 K/B connector

FC-PGA 370 processor PCI-to-ISA bridge Intel¨ FWH Clock generator Adaptec AIC-7892 DOC socket Intel¨ i810e chipset Four 168-pin DIMM sockets Two IDE connectors FDD port External power connector Intel¨ 440BX south bridge PIO port RS-232

10/100 Base-T Ethernet port C&T 69000 display chip VGA port

PS/2 mouse connector DS1687 real Y2K RTC PS/2 K/B connector

Panel Display Port Socket 370 for Pentium¨ III Intel¨ 440BX north bridge or Celeronª processor DOC socket Intel¨ 82559 10/100 Base-T Ethernet

4MB display cache Two IDE ports (ATA-100) Two DIMM Sockets Intel¨ ICH2 Chip ¨ RS-232 Intel 815E Chip Battery

FDD port Parallel port

Dual LAN/RJ45

USB port*

PS/2 K/B & Mouse

Socket 370 for Celeronª PCI to ISA Bridge Intel¨ 82559 LAN Chip or Pentium¨ III Processor Intel¨ FWH DOC socket Additional Power Source VGA port PCI extension Connector Additional power source Intel¨ 440BX North Bridge Four DIMM Sockets Two IDE ports RS-232

FDD port Parallel port

DS1687 LAN/RJ45 Intel¨ 82559 LAN Chip USB port* PS/2 K/B & Mouse PCI extension connector

VGA port

C&T 69000 chip Licensed BIOS Dual Socket 370 for Celeronª or Pentium¨ III Processor Intel¨ 440BX South Bridge DOC socket Two IDE ports (ATA-66)

Two RIMM sockets Intel¨ 840 chip Intel¨ ICH Chip RS232

FDD port Parallel port

Battery 10/100 Base-T Ethernet port Intel¨ 82559 LAN chip USB port* PS/2 K/B & Mouse

VGA port

External power connector Intel¨ FWH External K/B connector Socket 370 for Pentium¨ III DOC socket or Celeronª Processor C&T 69000 VGA chip