Tooway™ Preliminary Installation Training

Q2 2011 Summary

q The Tooway KA-SAT user terminal q Accessories and Multifeed q Health and Safety q Satellite pointing basics q Getting Spot configuration q The pointing process q The Modem GUI q The beeper q The Modem Signalling

page 2 Tooway terminal ODU

page 3 Tooway TRIA description

> RT4000N-010: - 3W amplifier - Electromagnetic switch of polarization (guarantied for not less than 500 switches) - 300-800MHz Rx, 1800-2300MHz Tx (1 connector)(2 connectors at the beginning) - Beeper for antenna pointing - Maximum 50m IFL length with RG6 cable - Not paint, zinc, no feed/polarizer plastic cup

> Weight is 3.7 kg for TRIA in its packaging

> MTBF : 11 years (5 year lifetime expected)

> Availability : January 2011

page 4 Tooway User terminal for Ka band > RM4100N-010: - One IFL Cable - 300-800MHz Rx, 1800- 2300MHz Tx (1 connector)

- 1 x Ethernet interface (1Gbps)

- USB interface (for future service upgrade)

- GUI

- 110/220Vac ® 30 Vdc power to TRIA page 5 Tooway 0.75 antenna shipping box

> RA4075N-010: - 77 x 72cm antenna dish size (packaging size 100 x 80 x 17.5cm) - Weight : 12.8kg - Integrating carry handle solution

page 6 Tooway 0.75m antenna description (E)

> European mid pole solution (pole not provided by the logistic centre in Europe, beige color – 40/75mm) > For Elevation angels up to 45 °

page 7 Az/El adjustment (E)

Waiting picture with the correct antenna colour > Az adjustment

> El adjustment

page 8 Antenna pointing limits > Find out the window Elevation

> 56.5° noise heard beat tone 56.5° first hint of a carrier

54.5° modem sync SNR 2.5 dB

53° optimum pointing SNR 9.9

52° modem sync. SNR 0.0 dB

51° modem start sync first hint of a carrier detectable <51° noise and heard beat tone

page 9 Antenna pointing limits 2.5° > The size of the window

2° Carrier detect

Modem sync Peeking optimum

-2.4° -1.8° 1.8° 2.4°

-2°

-2.5°

Antenna peaking behaviour corresponds to a 1.5 m Ku band antenna

page 10 Terminal mount mechanical load

page 11 Alternative Tooway terminal versions for special applications

> Top pole mount antenna - Same size antenna mount for higher elevation above 45° - Delivered with SB1 universal mount, no flexibility on mount diameter - Antenna colour dark gray as SB1 antenna

> IDU with 2 IFL cables for services including broadcast functions (Capability to connect separate Ka band receiver) - RM4200N-010: - 1000-1500MHz Rx (1 connector) - 1800-2300MHz Tx (1 connector) - 1 x Ethernet interface (1Gbps) - USB interface (for future service upgrade) - 110/220Vac ® 30Vdc power supply (<50m IFL length with RG6) - Black housing with blue LEDs > Professional terminal 1m/1.2 m antenna under development (Aug 2011)

page 12 Tooway ODU synthesis

> The following table provides G/T and EIRP performances of the Tooway ODU

Description EIRP @ 29.75GHz Rx G/T @ 19.95GHz 0.75m / 3W ODU 48.4dBW 17.2dB/K 1.0m / 3W ODU 51.2dBW 20.4dB/K 1.2m / 3W ODU 52.8dBW 23.0dB/K

> Tooway service deployment is foreseen with the smallest one, nevertheless a 1 and 1.2m antenna dish sizes could be used in the edge of KA-SAT coverage

> As 1 and 1.2m antenna dish size have an EIRP higher than 50dBW, the distributor has to manage license issues

page 13 Tooway terminal setup Broadband service only

> Interactive services with 1-IFL modem toowayTM TRIA 1-IFL

toowayTM antenna Phone ToowayTM modem 1-IFL

VoIP phone IPTV STB

Rx/Tx

WiFi router L/S band cable for tooway optional Cable for Analogue phone Ethernet cable SCART/DVI/HDMI…for TV User PC

User TV screen page 14 Tooway terminal setup Broadband service only + DTH Ka & Ku band Rx only

> Interactive services with 2-IFL modem toowayTM TRIA 2-IFL > Ka band Rx only with additional splitter (9°E) Ku DTH LNB

> Ku band Rx only with additional Ku band LNB (0.8°W, 5°E, 13°E or 19°E)

toowayTM antenna Phone ToowayTM modem 2-IFL

VoIP phone IPTV STB Rx

WiFi router L/S band cable for tooway Cable for Analogue phone Ethernet cable SCART/DVI/HDMI…for TV User PC Satellite 2 way splitter L band cable for DTH Reference : S106 Public cost : 6€ TTC User TV screen page 15 Summary

page 16 Necessary accessories

> Antenna fixation - Fixation on a wall - Estimated price 15 – 20 €

- Fixation on the ground (Flat roof) - Estimated price 20 – 35 €

- Fixation on an angled roof - Estimated price 50 to 95 €

page 17 Necessary accessories

•Ifl Cables “coaxial cable” connection between Modem and ODU (TRIA)

•Normally (98% of all cases) one cable for TX and RX •300 – 800 MHz Fwd Link IF in frequency range of cable networks and mobile services •Cable length about 50 m with good RG 6 cable •Centre wire must be full copper min 1mm Diameter •Minimum double shielding •Estimated price 25€/100 m

page 18 Multifeed for TV reception

page 19 Multifeed TV reception

Surfbeam 2 antenna pointed to 9 ° East Multifeed reception on that antenna from following orbital pos.

5° W (AB 3 Fransat) possible with margin of about 4 dB 0.8° W in principle possible; further test on site 4.8° E in principle possible; further test on site 7° E not possible too close to Terminal feed require special development 9° E not possible as same orbital position of Ka Sat 13° E possible with sufficient margins 16° E not possible due to strong interference and insufficient power satellites 19.2° E possible with sufficient margins 28.5° E possible for all official Freesat channels with margins of about 4 dB

page 20 Multifeed

28.5 ° East == 19° E – 13° E – 4.8° E – 0.8° W == 5° W

page 21 Summary

page 22 Licensing for Tooway

CEPT RECOMMENDATION:

When a Terminal:

•Receives in the exclusive Satellite Band 19.7-20.2 GHz

• Is located more than 500 m away from any airport

• Transmits in the Exclusive Satellite Band (29.5 – 30.00GHz)

• Has a Transmit Power of no more than 2 Watt

• Generates an EIRP of no more than 50 dBW

NO INDIVIDUAL LICENSING IS REQUIRED

This blanket license applies to most European countries but all installers must comply with local regulations Page 23 Paris, 5/8/2011Network & Product Description page 23 Health & security

Weight of antenna plus transceiver is 14Kgs Lifting the antenna over shoulder – new drawing Balance Fix transceiver after securing antenna on mast

page 24 Health & security Assessing building earth Before linking the Tooway coaxial cable into the building earthing system you should assess the building earth. If the property does not conform to local regulations then the customer must be informed If the property does conform then you should earth the system to prevent static build up and or touch currents •Identify a suitable earthing location (e.g. socket, lighting circuit, electrical circuit) •Install a coaxial cable earthing block and earth as shown

page 25 Summary

page 26 Installation position/ Line of Sight

There are 4 criteria for choosing a site for antenna installation 1. Clear Line Of Sight (L.O.S) 2. Suitable surface for fixing antenna mount 3. Cable route and distance – Max 50m 4. Safety

page 27 Tooway manual Line of Sight There must be a 10 degree separation between the line of sight angle and any obstacles

Normally a wall installation at high level gives the clearest L.O.S.

page 28 Summary

page 29 FWD link user beams

page 30 Mapping and configuration

> Color in the pdf Color in Viasat GUI Number in Viasat GUI > RED BLUE 1 > GREEN ORANGE 2 > BLUE PURPLE 3 > YELLOW GREEN 4

> Beam number Beam color Symbol rate Center frequency Polarization > 1 Blue 50 19.73125 RHCP > 2 Orange 50 19.99375 RHCP > 3 Purple 50 20.11875 LHCP > 4 Green 50 19.85625 LHCP

page 31 Ka Sat finder > http://finder.tooway-instal.com

page 32 Ka Sat finder > http://finder.tooway-instal.com

page 33 KA-sat Finder iPhone

page 34

34 Summary

page 35 Tooway Terminal pointing procedure Presumption Modem installed and IFL connected to TRAI > Zusammenbau der Antenne > Richtigen SAT-Spot finden > Modem und Laptop verbinden, enter 192.168.100.1 > Goto Modem GUI Install menu; enter: 192.168.100.1/?page=install > Korrekte Spotdaten eingeben => TRIA beeper starts > Antenne einstellen => Modem lock tone > Azimuth fixieren > Elevation fixieren => continuous tone > Antenna final fixation > Pointing check (Daumen Check)

page 36 Summary

page 37 Terminal GUI 1.0.3

http://192.168.100.1

page 38 Terminal GUI 1.0.3 http://192.168.100.1/?page=install

page 39 Terminal GUI 1.0.3

page 40 GUI Version 1.1.1 http://192.168.100.1

page 41 GUI Version 1.1.1

page 42 GUI 1.1.1

page 43 GUI 1.1.1

http://192.168.100.1/install

page 44 GUI 1.1.1

page 45 GUI 1.1.1

page 46 GUI 1.1.1

page 47 Summary

page 48 Az/El adjustment (E)

Waiting picture with the correct antenna colour > Az adjustment

> El adjustment

page 49 Pointing Beeper process Phase In Az, Modem detect the first maximum

First maximum Lower Beep Beep tone

Constant Beep Beep tone

Satellite Fwc carrier AGC tone (bip bup), Modem Carrier SNR detection and synch.

Heard Beat SNR about 0 dB

Az or El angle of antenna

page 50 Pointing Beeper process Phase In Az, Modem detect the first maximum

Maximum peeking point

Second maximum 0.15 dB below maximum Continuous tone

Lower Beep Beep tone

Satellite Fwc carrier AGC tone (bip bup), Modem Carrier SNR detection and synch. Heard Beat SNR about 0 dB

Az or El angle of antenna

page 51 Summary

page 52 Modem LED legende

page 53 Thank you for your kind attention!

Enjoy the film!!

page 54