International Thermocouple Color Codes - Thermocouple and Extension Grade Wires
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
COMPLETE WARDROBE of SHADES. for BEST RESULTS, Dr.’S REMEDY SHADE COLLECTION SHOULD BE USED TOGETHER with BASIC BASE COAT and CALMING CLEAR SEALING TOP COAT
COMPLETE WARDROBE OF SHADES. FOR BEST RESULTS, Dr.’s REMEDY SHADE COLLECTION SHOULD BE USED TOGETHER WITH BASIC BASE COAT AND CALMING CLEAR SEALING TOP COAT. ALTRUISTIC AMITY BALANCE NEW BOUNTIFUL BRAVE CHEERFUL CLARITY COZY Auburn Amethyst Brick Red BELOVED Blue Berry Cherry Coral Cafe A playful burnt A moderately A deep Blush A tranquil, Bright, fresh and A bold, juicy and Bright pinky A cafe au lait orange with bright, smokey modern Cool cotton candy cornflower blue undeniably feminine; upbeat shimmer- orangey and with hints of earthy, autumn purple. maroon. crème with a flecked with a the perfect blend of flecked candy red. matte. pinkish grey undertones. high-gloss finish. hint of shimmer. romance and fun. and a splash of lilac. DEFENSE FOCUS GLEE HOPEFUL KINETIC LOVEABLE LOYAL MELLOW MINDFUL Deep Red Fuchsia Gold Hot Pink Khaki Lavender Linen Mauve Mulberry A rich A hot pink Rich, The perfect Versatile warm A lilac An ultimate A delicate This renewed bordeaux with classic with shimmery and ultra bright taupe—enhanced that lends everyday shade of juicy berry shade a luxurious rich, romantic luxurious. pink, almost with cool tinges of sophistication sheer nude. eggplant, with is stylishly tart matte finish. allure. neon and green and gray. to springs a subtle pink yet playful sweet perfectly matte. flirty frocks. undertone. & classic. MOTIVATING NOBLE NURTURE PASSION PEACEFUL PLAYFUL PLEASING POISED POSITIVE Mink Navy Nude Pink Purple Pink Coral Pink Peach Pink Champagne Pastel Pink A muted mink, A sea-at-dusk Barely there A subtle, A poppy, A cheerful A pale, peachy- A high-shine, Baby girl pink spiked with subtle shade that beautiful with sparkly fresh bubble- candy pink with coral creme shimmering soft with swirls of purple and cocoa reflects light a hint of boysenberry. -
Cool Blondes Shades
THE NEW BLONDES We broadened It’s color range adding new shades (levels 8 to 10) with cold/slightly cold reflex (take 8.11 as an example), to meet global market’s expectations (trends are looking towards neutral/cold tones). We also worked on the existing range, adding more levels and reflexes (10.00, for example), answering to customers and hairdressers requests. THE NEW SHADES 10.11 10.81 9.81 9.12 9 Mother of pearl 8.11 8.81 THE NEW BLONDES THE EXPANDED SERIES 10 10S 9.16 8.02 COLOR CHART INTENSE ASH FAMILY 8.11/8AA intense ash light blonde 10.11/10AA intense ash lightest blonde These shades add an intense ash reflex and neutralize orange and yellow/orange residual reflexes. Good grey hair coverage SANDY ASH FAMILY 10.81/10SA 9.81/9SA 8.81/8SA lightest sand ash blonde very light sand ash blonde light sand ash blonde These shades add a cold beige reflex and soften golden ones. Good grey hair coverage IRIDESCENT FAMILY 9.12/9AV very light irisè ash blonde This shade adds an irisé ash reflex and neutralizes golden ones. Fair grey hair coverage PURPLE PEARL FAMILY 9 mother of pearl This shade adds an irisè – pearl reflex, and neutralizes golden ones. Good grey hair coverage CHROMA FAMILY IT’S COLOR EXPANDED SERIES 9.16/9AR very light red ash blonde This shade adds a natural red ash reflex. Fair grey hair coverage IRISÉ FAMILY IT’S COLOR EXPANDED SERIES 8.02/8NV light irisè natural blonde This shade adds a natural irisé reflex and neutralizes golden ones. -
Seebeck and Peltier Effects V
Seebeck and Peltier Effects Introduction Thermal energy is usually a byproduct of other forms of energy such as chemical energy, mechanical energy, and electrical energy. The process in which electrical energy is transformed into thermal energy is called Joule heating. This is what causes wires to heat up when current runs through them, and is the basis for electric stoves, toasters, etc. Electron diffusion e e T2 e e e e e e T2<T1 e e e e e e e e cold hot I - + V Figure 1: Electrons diffuse from the hot to cold side of the metal (Thompson EMF) or semiconductor leaving holes on the cold side. I. Seebeck Effect (1821) When two ends of a conductor are held at different temperatures electrons at the hot junction at higher thermal velocities diffuse to the cold junction. Seebeck discovered that making one end of a metal bar hotter or colder than the other produced an EMF between the two ends. He experimented with junctions (simple mechanical connections) made between different conducting materials. He found that if he created a temperature difference between two electrically connected junctions (e.g., heating one of the junctions and cooling the other) the wire connecting the two junctions would cause a compass needle to deflect. He thought that he had discovered a way to transform thermal energy into a magnetic field. Later it was shown that a the electron diffusion current produced the magnetic field in the circuit a changing emf V ( Lenz’s Law). The magnitude of the emf V produced between the two junctions depends on the material and on the temperature ΔT12 through the linear relationship defining the Seebeck coefficient S for the material. -
Practical Temperature Measurements
Reference Temperatures We cannot build a temperature divider as we can a Metal A voltage divider, nor can we add temperatures as we + would add lengths to measure distance. We must rely eAB upon temperatures established by physical phenomena – which are easily observed and consistent in nature. The Metal B International Practical Temperature Scale (IPTS) is based on such phenomena. Revised in 1968, it eAB = SEEBECK VOLTAGE establishes eleven reference temperatures. Figure 3 eAB = Seebeck Voltage Since we have only these fixed temperatures to use All dissimilar metalFigures exhibit t3his effect. The most as a reference, we must use instruments to interpolate common combinations of two metals are listed in between them. But accurately interpolating between Appendix B of this application note, along with their these temperatures can require some fairly exotic important characteristics. For small changes in transducers, many of which are too complicated or temperature the Seebeck voltage is linearly proportional expensive to use in a practical situation. We shall limit to temperature: our discussion to the four most common temperature transducers: thermocouples, resistance-temperature ∆eAB = α∆T detector’s (RTD’s), thermistors, and integrated Where α, the Seebeck coefficient, is the constant of circuit sensors. proportionality. Measuring Thermocouple Voltage - We can’t measure the Seebeck voltage directly because we must IPTS-68 REFERENCE TEMPERATURES first connect a voltmeter to the thermocouple, and the 0 EQUILIBRIUM POINT K C voltmeter leads themselves create a new Triple Point of Hydrogen 13.81 -259.34 thermoelectric circuit. Liquid/Vapor Phase of Hydrogen 17.042 -256.108 at 25/76 Std. -
2020 Global Color Trend Report
Global Color Trend Report Lip colors that define 2020 for Millennials and Gen Z by 0. Overview 03 1. Introduction 05 2. Method 06 Content 3. Country Color Analysis for Millennials and Gen Z 3.1 Millennial Lip Color Analysis by Country 08 3.2 Gen Z Lip Color Analysis by Country 09 4. 2020 Lip Color Trend Forecast 4.1 2020 Lip Color Trend Forecast for Millennials 12 4.2 2020 Lip Color Trend Forecast for Gen Z 12 5. Country Texture Analysis for Millennials and Gen Z 5.1 Millennial Lip Texture Analysis by Country 14 5.2 Gen Z Lip Texture Analysis by Country 15 6. Conclusion 17 02 Overview Millennial and Generation Z consumers hold enormous influence and spending power in today's market, and it will only increase in the years to come. Hence, it is crucial for brands to keep up with trends within these cohorts. Industry leading AR makeup app, YouCam Makeup, analyzed big data of 611,382 Millennial and Gen Z users over the course of six months. Based on our findings, we developed a lip color trend forecast for the upcoming year that will allow cosmetics The analysis is based on brands to best tailor their marketing strategy. According to the results, pink will remain the most popular color across all countries and age groups throughout 2020. The cranberry pink shade is the top favorite among Millennials and Gen Z across all countries. Gen Z generally prefers darker 611,382 shades of pink, while millennial consumers lean toward brighter shades. The second favorite shade of pink among Gen Z in Brazil, China, Japan, and the US is Ripe Raspberry. -
Type T Thermocouple Copper-Constantan Temperature Vs Millivolt Table Degree C
Technical Information Data Bulletin Type T Thermocouple CopperConstantan T Extension Grade Temperature vs Millivolt Table Thermocouple Grade E + Copper Reference Junction 32°F + Copper M Temperature Range Maximum Thermocouple Grade Maximum Useful Temperature Range: Temperature Range P Thermocouple Grade: 328 to 662°F –454 to 752°F Consrantan 200 to 350°C –270 to 400°C Consrantan E Extension Grade: 76 to 212°F Accuracy: Standard: 1.0°C or 0.75% 60 to 100°C Special: 0.5°C or 0.4% R Recommended Applications: A Mild Oxidizing,Reducing Vacuum or Inert Environments. Good Where Moisture Is Present. Low Temperature Applications. T Temp0123456789 U 450 6.2544 6.2553 6.2562 6.2569 6.2575 440 6.2399 6.2417 6.2434 6.2451 6.2467 6.2482 6.2496 6.2509 6.2522 6.2533 R 430 6.2174 6.2199 6.2225 6.2249 6.2273 6.2296 6.2318 6.2339 6.2360 6.2380 420 6.1873 6.1907 6.1939 6.1971 6.2002 6.2033 6.2062 6.2091 6.2119 6.2147 E 410 6.1498 6.1539 6.1579 6.1619 6.1657 6.1695 6.1732 6.1769 6.1804 6.1839 400 6.1050 6.1098 6.1145 6.1192 6.1238 6.1283 6.1328 6.1372 6.1415 6.1457 390 6.0530 6.0585 6.0640 6.0693 6.0746 6.0799 6.0850 6.0901 6.0951 6.1001 & 380 5.9945 6.0006 6.0067 6.0127 6.0187 6.0245 6.0304 6.0361 6.0418 6.0475 370 5.9299 5.9366 5.9433 5.9499 5.9564 5.9629 5.9694 5.9757 5.9820 5.9883 360 5.8598 5.8671 5.8743 5.8814 5.8885 5.8955 5.9025 5.9094 5.9163 5.9231 P 350 5.7847 5.7924 5.8001 5.8077 5.8153 5.8228 5.8303 5.8378 5.8452 -
Testing Gold Platinum Silver.Qxp
PROCEDURES FOR TESTING GOLD, PLATINUM AND SILVER To test for the karat value of gold, platinum and silver, you will need the following materials and tools: • Black acid testing stone that is washed thoroughly with water prior to each test. • Acids. • Gold testing needles with gold tips - used for comparison with test pieces. Testing for 10K, 12K, 14K Scratch the gold piece to be tested on the stone. Next to this position, scratch the appropriate needle (10, 12 or 14K). Place a drop of the appropriate acid on the stone where the gold was rubbed off. If the gold is the same karat or higher, the color of the scratch mark for the gold piece will appear the same as the mark from the needle. If that gold piece is a lower karat, the scratched deposit will become fainter and eventually disappear. Testing for 18K Scratch the test piece on the stone and apply 18K acid. Any gold that is less than 18K will disappear in less than 30 seconds. Gold that remains on the stone is 18K or higher. Testing for 20K and 24K Scratch the gold piece on the stone. Next, scratch any item of know karat (coin or needle) on the stone. Apply one drop of acid to area. The material that starts to disappear has the lower karat. Testing for Platinum Scratch the test item on the stone and apply one drop of acid to the application on the stone. If the material is platinum, it should keep its white, bright color. White Gold The same procedure for platinum can be used for 18K white gold. -
Pressure Ulcer Staging Cards and Skin Inspection Opportunities.Indd
Pressure Ulcer Staging Pressure Ulcer Staging Suspected Deep Tissue Injury (sDTI): Purple or maroon localized area of discolored Suspected Deep Tissue Injury (sDTI): Purple or maroon localized area of discolored intact skin or blood-fi lled blister due to damage of underlying soft tissue from pressure intact skin or blood-fi lled blister due to damage of underlying soft tissue from pressure and/or shear. The area may be preceded by tissue that is painful, fi rm, mushy, boggy, and/or shear. The area may be preceded by tissue that is painful, fi rm, mushy, boggy, warmer or cooler as compared to adjacent tissue. warmer or cooler as compared to adjacent tissue. Stage 1: Intact skin with non- Stage 1: Intact skin with non- blanchable redness of a localized blanchable redness of a localized area usually over a bony prominence. area usually over a bony prominence. Darkly pigmented skin may not have Darkly pigmented skin may not have visible blanching; its color may differ visible blanching; its color may differ from surrounding area. from surrounding area. Stage 2: Partial thickness loss of Stage 2: Partial thickness loss of dermis presenting as a shallow open dermis presenting as a shallow open ulcer with a red pink wound bed, ulcer with a red pink wound bed, without slough. May also present as without slough. May also present as an intact or open/ruptured serum- an intact or open/ruptured serum- fi lled blister. fi lled blister. Stage 3: Full thickness tissue loss. Stage 3: Full thickness tissue loss. Subcutaneous fat may be visible but Subcutaneous fat may be visible but bone, tendon or muscle are not exposed. -
Eggplant, Pepper, Tomato Fungicides (Labeled & Rates/A)
2014 Tomato, Eggplant, Pepper Fungicides NYS TOMATO (T), EGGPLANT (E) and PEPPER (P) FUNGICIDES (Labeled & Rates/A) as of JULY 2014 T. A. Zitter, Dept. Plant Pathology, Cornell University, Ithaca, NY http://vegetablemdonline.ppath.cornell.edu Underlined are Registered for use in NYS and Includes OMRI Listed products; * and † refer to restrictions in NYS; Group Nos. before Products are from the Fungicide Resistance Action Committee and EPA (Mode of Action), while Nos. after refer to Days To Harvest (DTH) ex. [FRAC No. 40 Product 4DTH]; (Warnings and Fungicide Resistance concerns are given in italics) (Important comments also in RED); Because of EB resistance to Strobilurins in NYS, consider Quadris Opti, Quadris Top or Cabrio + Endura, or Tanos tank-mixed with protectant, but never use strobilurins alone for EB control. Systemic fungicides are in BOLD. Major fungicide groups have been color coded to aid in finding and categorizing by MOA: Phosphorous acids = Blue; Strobilurins or Group 11 = violet; Chlorothalonils = Black; Coppers = green; and Sulfurs = orange. Fungicide/nematicide usage for soil application or for Foliar/Greenhouse use has been highlighted as shown. Alphabetical Fungicide List T, P Chili P1Actigard14 50WG (EPA 100-922) REI 12 hrs (acibenzolar-S-methyl, host plant defense induction) (Syngenta); T=Bac. Spot and speck 1/3 to ¾ oz; Chili Pepper=Bac. Spot and Speck, 0.33- 0.75 oz/A. (Do not exceed rate [up to 6 applications] or yield reduction could occur). (Generally for field use, suggesting not applied before thinning or within 5 days of transplant). 14 DTH. T, E, P 33Agri-Fos0 (EPA 71962-1) REI 4 hrs (phosphorous acid) (Liquid Fert.) T = LB, Phytoph RR, 1.5 qts/40 gal; E = Pythium, Phytophthora, 1.25 qts/40 gal; P = Phytophthora RR, 1.5 qts/25 gal. -
RAL COLOR CHART ***** This Chart Is to Be Used As a Guide Only. Colors May Appear Slightly Different ***** Green Beige Purple V
RAL COLOR CHART ***** This Chart is to be used as a guide only. Colors May Appear Slightly Different ***** RAL 1000 Green Beige RAL 4007 Purple Violet RAL 7008 Khaki Grey RAL 4008 RAL 7009 RAL 1001 Beige Signal Violet Green Grey Tarpaulin RAL 1002 Sand Yellow RAL 4009 Pastel Violet RAL 7010 Grey RAL 1003 Signal Yellow RAL 5000 Violet Blue RAL 7011 Iron Grey RAL 1004 Golden Yellow RAL 5001 Green Blue RAL 7012 Basalt Grey Ultramarine RAL 1005 Honey Yellow RAL 5002 RAL 7013 Brown Grey Blue RAL 1006 Maize Yellow RAL 5003 Saphire Blue RAL 7015 Slate Grey Anthracite RAL 1007 Chrome Yellow RAL 5004 Black Blue RAL 7016 Grey RAL 1011 Brown Beige RAL 5005 Signal Blue RAL 7021 Black Grey RAL 1012 Lemon Yellow RAL 5007 Brillant Blue RAL 7022 Umbra Grey Concrete RAL 1013 Oyster White RAL 5008 Grey Blue RAL 7023 Grey Graphite RAL 1014 Ivory RAL 5009 Azure Blue RAL 7024 Grey Granite RAL 1015 Light Ivory RAL 5010 Gentian Blue RAL 7026 Grey RAL 1016 Sulfer Yellow RAL 5011 Steel Blue RAL 7030 Stone Grey RAL 1017 Saffron Yellow RAL 5012 Light Blue RAL 7031 Blue Grey RAL 1018 Zinc Yellow RAL 5013 Cobolt Blue RAL 7032 Pebble Grey Cement RAL 1019 Grey Beige RAL 5014 Pigieon Blue RAL 7033 Grey RAL 1020 Olive Yellow RAL 5015 Sky Blue RAL 7034 Yellow Grey RAL 1021 Rape Yellow RAL 5017 Traffic Blue RAL 7035 Light Grey Platinum RAL 1023 Traffic Yellow RAL 5018 Turquiose Blue RAL 7036 Grey RAL 1024 Ochre Yellow RAL 5019 Capri Blue RAL 7037 Dusty Grey RAL 1027 Curry RAL 5020 Ocean Blue RAL 7038 Agate Grey RAL 1028 Melon Yellow RAL 5021 Water Blue RAL 7039 Quartz Grey -
Copper Alloys
THE COPPER ADVANTAGE A Guide to Working With Copper and Copper Alloys www.antimicrobialcopper.com CONTENTS I. Introduction ............................. 3 PREFACE Conductivity .....................................4 Strength ..........................................4 The information in this guide includes an overview of the well- Formability ......................................4 known physical, mechanical and chemical properties of copper, Joining ...........................................4 as well as more recent scientific findings that show copper has Corrosion ........................................4 an intrinsic antimicrobial property. Working and finishing Copper is Antimicrobial ....................... 4 techniques, alloy families, coloration and other attributes are addressed, illustrating that copper and its alloys are so Color ..............................................5 adaptable that they can be used in a multitude of applications Copper Alloy Families .......................... 5 in almost every industry, from door handles to electrical circuitry to heat exchangers. II. Physical Properties ..................... 8 Copper’s malleability, machinability and conductivity have Properties ....................................... 8 made it a longtime favorite metal of manufacturers and Electrical & Thermal Conductivity ........... 8 engineers, but it is its antimicrobial property that will extend that popularity into the future. This guide describes that property and illustrates how it can benefit everything from III. Mechanical -
Purple Martin Project Our Vision
New York PurPle Martin Purple Martin P r o j e c t Project New York PHOTO JIM WILLIAMS Female and male parents share in building the nest to raise their young Adult female on the left shown with two of its young IN NEW YORK STATE, PURPLE MARTINS Check out these websites HAVE DECLINED BY 39% since 1985. for more information on purple martins: Help Reverse the Trend! www.friendsofiroquoisnwr.org/ The National Audubon Society suggests the purplemartins/media.html following ways that you can help to conserve newyorkwild.org/martin/martin_video.htm Purple Martins: purplemartin.org ■ Purchase or construct and install appropriate birds.audubon.org/species/purmar martin housing, including predator proofing. Project Partners Housing standards can be found at New York State Ornithological Association www.purplemartin.org Buffalo Audubon Society ■ Protect martin colonies from European Buffalo Ornithological Society Starlings and House Sparrows by trapping or Purple Martin Conservation Association otherwise removing these non-native nest Friends of Iroquois NWR site competitors. New York State Bluebird Society ■ Plant native trees, shrubs, flowers and Orleans Bluebird Society grasses which attract more insects than non- If you have questions about caring for a natives. In fact, they support almost 30 times Purple Martin colony, please contact: more insect diversity than introduced plants. FINWR c/o Carl Zenger ■ Avoid applying pesticides that kill or poison 1101 Casey Road flying insects that martins eat. Basom, NY 14013 Carl Zenger: [email protected] 716-434-7568 ■ Create a dragonfly pond to attract and breed these and other insects preferred by martins. Celeste Morien : [email protected] 585-721-8202 ■ Maintain a pile of small gravel or sand in an Pat Lynch: [email protected] open area for grit.