EN PORTABLE SOUND SYSTEM

Thank you for your purchase USER MANUAL GENERAL SAFETY RULES - Before using this product carefully read this instruction and retain it in a safe place together with the sales receipt, free service requisition form and, if possible, the wrapping. - Use the device for the designated purposes only and in a manner indicated in the instruction. The device is designated for domestic use, not for commercial purposes. - Do not use the device in the rain, in humid places or near water. Do not expose the device to dust, heat, direct sunlight, high humidity (never put the device into water or other liquids) and sharp strokes. Do not touch the device with wet hands. - Check the device regularly. If you notice any visible defects, contact an authorised service centre for repairs. ATTENTION! For safety reasons, do not let children play with the device or packaging materials (film, foam, cardboard, etc.). Hazard of choking and suffocation! DESCRIPTION Portable sound system. Bluetooth to connect with smartphone. Provides music streaming and file playback from smartphone and external memory drives. 2 with sound effects and voice changer. Voice recording function. Built-in colored LED party lights. Included in the kit are: • DOPING S9 • Charging cable USB-A/microB • 2 microphones • Operating manual FUNCTIONS - Sound system is equipped with USB , linear input/output 3.5 mm and 3.5 mm sockets. - Reads USB flash memory (Flash) records in MP3 format. - Track memorising function. - After restarting renews composition. - Lithium battery ensures independent use of the device. - Stylish and attractive design, LED lighting with rhythmic colour effects. - Particularly durable, drop-resistant frame.

- 1 - 3510007 EN

8 9 10 11 1 13 1 1

1 6

3 7

Control panel PREPARATION (See component numbers on the picture) Unpacking - Take the device out of packing. - Take off all the packing materials and bracings. Charging the battery - Add the cable plug found in the set to jack DC 5V (9), add the other cable USB plug to jack of the or adapter, a red charging mode indicator will light up (10). When indicator turns off, battery is charged. Charging adapter in USB output shall be 5V±10%. Charge the battery for 3-4 hours. NOTE: If the device is powered on at the time of charging, the time of charging is longer. USING THE DEVICE Switching on: To turn the device on, set the main LIGHT-ON-OFF switch (8) to position ON. Volume control: By turning the button of volume regulator (1) you can change the level of volume. MP3 (digital) file playback: 1. Insert USB flash memory with MP3 records in the appropriate socket. IMPORTANT: For the to function normally, before switching on the device using the switch LIGHT-ON-OFF (8) in position ON, make sure USB flash memory is inserted. During the device operation, do not remove and insert USB flash memory. To do this, the device must be switched off using the switch LIGHT-ON-OFF (8) in position OFF. If USB flash memory will be inserted or removed from an operating device, information or/and equipment damages are possible!

- 2 - 3510007 EN

2. Turn on the device by using LIGHT-ON-OFF (8) switch. MP3 playback will begin. - If you have previously used another mode (''bLUE'', ''AUH''), press [Mode] (2) to select the MP3 mode. - Press [ ] (6) if you wish to turn on the Pause mode - playback will be stopped. - If you press the button [ ] (6) again, playback will be resumed from where it was stopped. - Selecting the next or previous track: Briefly press [] (7). Briefly press [] (5). 3. After listening to recordings, press [ ] (6). 4. Turn the device off by moving the main switch LIGHT-ON-OFF (8) to position OFF. 5. Remove flash memory. Choosing repetition/play mode By pressing the key [Rep] (3) you can select one of the following modes: *: repeats one composition. **: plays all compositions. Playback of the analogue signal from external source: 1. Put in the cable plug found in the set in the 3.5mm jack AUX IN (13), put the other cable plug in the source (for example, smartphone, tablet PC, MP3/MP4 player, etc.) LINE OUT or earphone jack. 2. Switch on the device and with the button [Mode] (2) choose the mode "Line in". 3. Adjust volume. Bluetooth wireless connection: NOTES: • Bluetooth is a technology that uses radio waves to wirelessly connect devices located within a close range of each other. • Since there are many different manufacturers, models and software versions, complete functionality cannot be guaranteed. Device pairing a. Make sure that the Bluetooth function is activated on your mobile device (e.g. smartphone). To do this, refer to your mobile device's manual. b. Turn on the device by using the LIGHT-ON-OFF (8) switch. c. Press the [Mode] button (2). Turn on Bluetooth mode "Bluetooth mode". Sound system is now attempting to connect to the device with which it was previously paired. If sound system finds the paired device, a signal will sound. If the paired device is not found, sound system is ready to be paired with another device. d. Find the Bluetooth menu on your mobile device and register the device on your mobile device. To do this, refer to your mobile device's manual. Information should appear on your mobile device’s display regarding the paired device (BT ID) with the name "DOPING_S9".

- 3 - 3510007 EN

e. If is requested, enter "0000" (or another depending on the model or software version of you mobile device). INFO: Use the mobile device's controls to select the piece and play mode and set the start volume (see the mobile device’s user manual). You can adjust the volume with the volume regulator of the sound system (1). 3. Re-Connecting via Bluetooth a. Activate the Bluetooth feature on your mobile device. b. Turn on the sound system and choose the mode "bLUE". c. If your mobile device was paired only with the sound system, connection will take place automatically. If your mobile device was paired with several other devices, connection with the sound system will have to be made manually. NOTES: • Depending on the playback device manufacturer, re-registration may be required (PAIRING). • If you experience any problems connecting to the device, deactivate WiFi and mobile data features on your device. • Bluetooth compatibility cannot be guaranteed for devices (e.g. mobile phones), which will be produced in the future. • To ensure optimum connection, make sure your device's battery is fully charged. • Some mobile devices have a power-saving mode. Deactivate the power-saving mode, as it may cause problems in the transmission of data in the Bluetooth mode. Connecting a microphone: 1. Turn off the device. 2. Turn the volume control (1) to minimum. 3. Plug into the microphone socket MIC 1 (15) or/and MIC 2 (14) 3.5 mm plug of the dynamic microphone. IMPORTANT: Move the dynamic microphone switch to the ON position. 4. Turn on the device by using the LIGHT-ON-OFF switch (8). 5. Speak into the microphone and set the necessary volume level with the control regulator (1). Karaoke function: To use the karaoke function, you must first connect the microphone, as described under "Connecting a microphone" and insert a USB flash drive with pre-recorded music (you can also use a mobile device with a Bluetooth connection or another external music player, which is connected to the socket AUX IN (13), as a music source). 1. Turn on the device by using the LIGHT-ON-OFF switch (8). 2. Press [Mode] button (2) to select the MP3 music source. 3. Adjust the volume level of music and microphone. When using Bluetooth or AUX "Line in" mode, also adjust volume on your mobile device or external player.

- 4 - 3510007 EN

Lighting effects: Front panel of the device may be lit with multicoloured LED diodes. These light effects may be switched on by sliding the switch LIGHT-ON-OFF (8) in position LIGHT. Microphone effects By temporarily pressing the microphone key , you can play any of the 12 (6+6) microphone effects. By pressing the key  for 2 seconds, you can choose the next effect. Voice changer By pressing the microphone key VOICE CHANGER you can change your voice to modes "OLD MAN"  "MONSTER"  "WOMAN"  "REAL VOICE" Echo effect By pressing the front panel key [Mode] (2) for 2 seconds, you can switch on/change the degree of echo effect. Recording from microphone to USB flash drive • The maximum length of the recorded material depends on the capacity of the memory device. • Records will be saved in the JL_REC folder. 1. Turn off the sound system with the switch LIGHT-ON-OFF (8). 2. Insert the USB flash drive into the USB socket (11). 3. Turn the main volume control VOLUME (1) to the minimum. 4. Move the microphone switch to the ON position. 4.1 Insert the microphone jack into the MIC1 (15) socket (1) or/and MIC2 (14). 5. Turn on the sound system with the switch LIGHT-ON-OFF (8). 6. Press the [Rec] (4) key. 7. Speak into the microphone and set the desired sound level with the control VOLUME (1). 8. To finish recording, briefly press theRec [ ] (4) key. The record will be saved on the flash drive. • If the recording fails, make sure that the flash drive still has a free space. Playback of the microphone recordings After completion of the recording, the last recording will be played automatically. If you want to play other microphone records, press the key [] (7). To exit the microphone recording mode, briefly press the [Rec] (4) key. PROVISIONS FOR PROPER USE This is a complex device and it must be treated carefully. For device to serve for a long time and trustworthy, please take into consideration the following: 1. Do not place the device in a very hot place (over 40˚C). In heat, electronic devices and batteries damage faster and plastic details can even become deformed. 2. make sure the device is not in contact with water and any other liquids. 3. Do not draw the device near powerful sources of electric field and static . 4. Do not arbitrarily open the device and repair it.

- 5 - 3510007 EN

5. Do not insert non-, unqualified or broken spare parts, accessories, batteries in the device. 6. If the device is brought from cold into a warm room, do not switch it on, but allow dewy details to get dry for approximately two hours. 7. Do not allow unqualified persons to open the device. 8. Protect the device from blows, falls and powerful vibrations. 9. If the device has got wet, switch it off, wipe it and let it dry for at least 24 hours in a warm place. CLEANING Clean the device with soft, dry or slightly wet cloth, use no solvents (petrol, acetone, spirit etc.) for cleaning. Do not use any abrasive or caustic cleaning agents. After cleaning, carefully dry the device. Technical data Inputs/outputs: USB flash card socket, dynamic microphone 3,5mm input (x2), linear 3.5mm output and input, Wireless connectivity: Bluetooth V5.0 Speaker: 4" (102mm), 2Ω Output power: 12W Playback freq. range: 90Hz - 20kHz Signal/noise ratio: >60dB Charging power supply: 5V, 1A, direct current (USB) Battery: Li-ion 3.7V, 2400mAh Battery charging time: approximately 4 hours Battery operation time*: to 8 hours Playback file format: MP3/FLAC/WMA/WAV Temperature of environment: 0˚C to 40˚C Relative humidity of environment: 20% - 90% Size: 287x 292 x 132mm Weight: 1,15kg *measurement done by 33% volume, with the LIGHT-ON-OFF switch (4) in position ON and the result is approximate (depends on flash construction and recording content). Technical changes are possible. Let’s conserve the environment! Don’t trash this device together with other garbage, but bring it to the official recycling collection point.

Duplication of this instruction for commercial purposes is not allowed.

- 6 - 3510007