International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS) . The DIS requires approval by at least 75 % of the member bodies casting a vote. Standards published
New International Standards published between 06 July and 24 August 2010 *Available in English only ** French version of standard previously published in English only
Price group
TC 6 Paper, board and pulps ISO 3039:2010 * Corrugated fibreboard – Determination of grammage of the component papers after separation D ISO 11476:2010 Paper and board – Determination of CIE whiteness, C/2 degrees (indoor illumination conditions) G
TC 8 Ships and marine technology ISO/PAS 13613: 2010 * Ships and marine technology – Maintenance and testing to reduce losses in critical systems for F propulsion ISO/PAS 30005: 2010 * Ships and marine technology – Ship recycling management systems – Information control for M hazardous materials in the manufacturing chain of shipbuilding and ship operations
TC 10 Technical product documentation ISO/TS 128-71: 2010 * Technical product documentation (TPD) – General principles of presentation – Part 71: Simplified E representation for mechanical engineering drawings
TC 20 Aircraft and space vehicles ISO 11231:2010 * Space systems – Probabilistic risk assessment (PRA) J ISO 15856:2010 * Space systems – Space environment – Simulation guidelines for radiation exposure of non-metallic M materials ISO 22538-6: 2010 * Space systems – Oxygen safety – Part 6: Facility planning and implementation K
TC 21 Equipment for fire protection and fire fighting ISO/TS 11602-1:2010 * Fire protection – Portable and wheeled fire extinguishers – Part 1: Selection and installation F ISO/TS 11602-2:2010 * Fire protection – Portable and wheeled fire extinguishers – Part 2: Inspection and maintenance K
TC 22 Road vehicles ISO 1726-3: 2010 * Road vehicles – Mechanical couplings between tractors and semi-trailers – Part 3: Requirements for C semi-trailer contact area to fifth wheel ISO 4107:2010 * Commercial vehicles – Wheel-hub attachment dimensions A ISO 6312:2010 * Road vehicles – Brake linings – Shear test procedure for disc brake pad and drum brake shoe F assemblies ISO 15031-2: 2010 * Road vehicles – Communication between vehicle and external equipment for emissions-related D diagnostics – Part 2: Guidance on terms, definitions, abbreviations and acronyms ISO 15031-6: 2010 * Road vehicles – Communication between vehicle and external equipment for emissions-related G diagnostics – Part 6: Diagnostic trouble code definitions ISO/TS 19713-1:2010 * Road vehicles – Inlet air cleaning equipment for internal combustion engines and compressors – Part U 1: Fractional efficiency testing with fine particles (0,3 m to 5 m optical diameter) ISO/TS 19713-2:2010 * Road vehicles – Inlet air cleaning equipment for internal combustion engines and compressors – Part R 2: Fractional efficiency testing with coarse particles (5 m to 40 m optical diameter) ISO 26022:2010 * Road vehicles – Ergonomic aspects of transport information and control systems – Simulated lane S change test to assess in- vehicle secondary task demand ISO 27955:2010 Road vehicles – Securing of cargo in passenger cars, station wagons and multi-purpose vehicles – H Requirements and test methods
TC 23 Tractors and machinery for agriculture and forestry ISO 14223-2: 2010 Radiofrequency identification of animals – Advanced transponders – Part 2: Code and command Q structure
TC 24 Particle characterization including sieving ISO 9277:2010 * Determination of the specific surface area of solids by gas adsorption – BET method M
TC 29 Small tools ISO 5610-1: 2010 Tool holders with rectangular shank for indexable inserts – Part 1: General survey, correlation and H determination of dimensions ISO 5610-10: 2010 Tool holders with rectangular shank for indexable inserts – Part 10: Style N D ISO 5610-11: 2010 Tool holders with rectangular shank for indexable inserts – Part 11: Style R D ISO 5610-12: 2010 Tool holders with rectangular shank for indexable inserts – Part 12: Style S F ISO 5610-13: 2010 Tool holders with rectangular shank for indexable inserts – Part 13: Style T C ISO 5610-14: 2010 Tool holders with rectangular shank for indexable inserts – Part 14: Style H D ISO 5610-15: 2010 Tool holders with rectangular shank for indexable inserts – Part 15: Style V C ISO 5610-2: 2010 Tool holders with rectangular shank for indexable inserts – Part 2: Style A D ISO 5610-3: 2010 Tool holders with rectangular shank for indexable inserts – Part 3: Style B D ISO 5610-4: 2010 Tool holders with rectangular shank for indexable inserts – Part 4: Style D D ISO 5610-5: 2010 Tool holders with rectangular shank for indexable inserts – Part 5: Style F D ISO 5610-6: 2010 Tool holders with rectangular shank for indexable inserts – Part 6: Style G D ISO 5610-7: 2010 Tool holders with rectangular shank for indexable inserts – Part 7: Style J E ISO 5610-8: 2010 Tool holders with rectangular shank for indexable inserts – Part 8: Style K D ISO 5610-9: 2010 Tool holders with rectangular shank for indexable inserts – Part 9: Style L E ISO 9270-1: 2010 7/24 taper spindle noses for automatic tool changers – Part 1: Dimensions and designation of spindle D noses of forms S and SF ISO 9270-2: 2010 7/24 taper spindle noses for automatic tool changers – Part 2: Dimensions and designation of spindle D noses of forms J and JF ISO 10649-1: 2010 Cutter arbors with parallel key and tenon drive – Part 1: General dimensions A ISO 10649-2: 2010 Cutter arbors with parallel key and tenon drive – Part 2: Dimensions and designation of tool holders B with hollow taper interface with flange contact surface ISO 10649-3: 2010 Cutter arbors with parallel key and tenon drive – Part 3: Dimensions and designation of tool holders B with 7/24 taper for automatic tool changers ISO 10649-4: 2010 Cutter arbors with parallel key and tenon drive – Part 4: Dimensions and designation of tool holders B with 7/24 taper without automatic tool changers
TC 34 Food products ISO 6887-5: 2010 Microbiology of food and animal feeding stuffs – Preparation of test samples, initial suspension and G decimal dilutions for microbiological examination – Part 5: Specific rules for the preparation of milk and milk products
TC 37 Terminology and other language and content resources ISO 639-4:2010 Codes for the representation of names of languages – Part 4: General principles of coding of the N representation of names of languages and related entities, and application guidelines ISO 29383:2010 Terminology policies – Development and implementation H
TC 38 Textiles ISO 105-E05: 2010 Textiles – Tests for colour fastness – Part E05: Colour fastness to spotting: Acid B ISO 2061:2010 Textiles – Determination of twist in yarns – Direct counting method F ISO 2307:2010 Fibre ropes – Determination of certain physical and mechanical properties H ISO 9554:2010 Fibre ropes – General specifications L ISO 10617:2010 Textiles – Standard data format for colorimetric communication – Textiles and related measurements R
TC 42 Photography ISO 18911:2010 * Imaging materials – Processed safety photographic films – Storage practices M
TC 43 Acoustics ISO 7779:2010 Acoustics – Measurement of airborne noise emitted by information technology and telecommunications V equipment ISO 10140-1: 2010 * Acoustics – Laboratory measurement of sound insulation of building elements – Part 1: Application P rules for specific products ISO 10140-2: 2010 * Acoustics – Laboratory measurement of sound insulation of building elements – Part 2: Measurement G of airborne sound insulation ISO 10140-3: 2010 * Acoustics – Laboratory measurement of sound insulation of building elements – Part 3: Measurement F of impact sound insulation ISO 10140-4: 2010 * Acoustics – Laboratory measurement of sound insulation of building elements – Part 4: Measurement F procedures and requirements ISO 10140-5: 2010 * Acoustics – Laboratory measurement of sound insulation of building elements – Part 5: Requirements Q for test facilities and equipment ISO 10848-4: 2010 * Acoustics – Laboratory measurement of the flanking transmission of airborne and impact sound E between adjoining rooms – Part 4: Application to junctions with at least one heavy element
TC 44 Welding and allied processes ISO 10675-2: 2010 Non-destructive testing of welds – Acceptance levels for radiographic testing – Part 2: Aluminium and E its alloys ISO 11745:2010 * Brazing for aerospace applications – Qualification test for brazers and brazing operators – Brazing of J metallic components
TC 45 Rubber and rubber products ISO 813:2010 Rubber, vulcanized or thermoplastic – Determination of adhesion to a rigid substrate – 90 degree peel E method ISO 2004:2010 Natural rubber latex concentrate – Centrifuged or creamed, ammonia- preserved types – Specifications B ISO 2781:2008/ Amd Rubber, vulcanized or thermoplastic – Determination of density – Amendment 1: Precision data XZ 1:2010 ISO 4641:2010 Rubber hoses and hose assemblies for water suction and discharge – Specification F ISO 28343:2010 Rubber compounding ingredients – Process oils – Determination of glass transition temperature by D DSC
TC 58 Gas cylinders ISO 10156: 2010/Cor 1: Gases and gas mixtures – Determination of fire potential and oxidizing ability for the selection of free 2010 cylinder valve outlets – Technical Corrigendum 1
TC 61 Plastics ISO 877-1: 2009** Plastics – Methods of exposure to solar radiation – Part 1: General guidance G ISO 877-2: 2009** Plastics – Methods of exposure to solar radiation – Part 2: Direct weathering and exposure behind C window glass ISO 877-3: 2009** Plastics – Methods of exposure to solar radiation – Part 3: Intensified weathering using concentrated F solar radiation
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO 10426-1: 2009** Petroleum and natural gas industries – Cements and materials for well cementing – Part 1: R Specification ISO 13628-1: * Petroleum and natural gas industries – Design and operation of subsea production systems – Part 1: XZ 2005/Amd 1: 2010 General requirements and recommendations – Amendment 1: Revised Clause 6 ISO 28781:2010 * Petroleum and natural gas industries – Drilling and production equipment – Subsurface barrier valves T and related equipment
TC 69 Applications of statistical methods ISO/TR 12845: 2010 Selected illustrations of fractional factorial screening experiments W
TC 70 Internal combustion engines ISO 7967-3: 2010 Reciprocating internal combustion engines – Vocabulary of components and systems – Part 3: Valves, F camshaft drives and actuating mechanisms
TC 76 Transfusion, infusion and injection equipment for medical and pharmaceutical use ISO 8362-6: 2010** Injection containers and accessories – Part 6: Caps made of aluminium-plastics combinations for B injection vials
TC 79 Light metals and their alloys ISO 2085:2010 Anodizing of aluminium and its alloys – Check for continuity of thin anodic oxidation coatings – Copper A sulfate test ISO 2128:2010 Anodizing of aluminium and its alloys – Determination of thickness of anodic oxidation coatings – Non- B destructive measurement by split-beam microscope ISO 2376:2010 Anodizing of aluminium and its alloys – Determination of electric breakdown potential B ISO 3211:2010 Anodizing of aluminium and its alloys – Assessment of resistance of anodic oxidation coatings to C cracking by deformation ISO 7759:2010 Anodizing of aluminium and its alloys – Measurement of reflectance characteristics of aluminium E surfaces using a goniophotometer or an abridged goniophotometer ISO 8993:2010 Anodizing of aluminium and its alloys – Rating system for the evaluation of pitting corrosion – Chart F method ISO 10215:2010 Anodizing of aluminium and its alloys – Visual determination of image clarity of anodic oxidation D coatings – Chart scale method
TC 85 Nuclear energy ISO 10276:2010 * Nuclear energy – Fuel technology – Trunnions for packages used to transport radioactive material K ISO 26802:2010 Nuclear facilities – Criteria for the design and the operation of containment and ventilation systems for X nuclear reactors
TC 87 Cork ISO 2219:2010 Thermal insulation products for buildings – Factory-made products of expanded cork (ICB) – M Specification
TC 96 Cranes ISO 4309:2010 Cranes – Wire ropes – Care and maintenance, inspection and discard U
TC 98 Bases for design of structures ISO 13822:2010 * Bases for design of structures – Assessment of existing structures S
TC 102 Iron ore and direct reduced iron ISO 4701:2008/ Cor * Iron ores and direct reduced iron – Determination of size distribution by sieving – Technical free 1:2010 Corrigendum 1
TC 108 Mechanical vibration, shock and condition monitoring ISO 18436-1: 2004** Condition monitoring and diagnostics of machines – Requirements for training and certification of F personnel – Part 1: Requirements for certifying bodies and the certification process ISO 18436-3: Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of XZ 2008/Amd 1: 2009** personnel – Part 3: Requirements for training bodies and the training process – Amendment 1 ISO 18436-3: 2008** Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of F personnel – Part 3: Requirements for training bodies and the training process
TC 114 Horology ISO 22810:2010 Horology – Water-resistant watches D
TC 119 Powder metallurgy ISO 11876:2010 Hardmetals – Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, B nickel and zinc in cobalt metal powders – Flame atomic absorption spectrometric method
TC 123 Plain bearings ISO/TR 27507: 2010 * Plain bearings – Recommendations for automotive crankshaft bearing environments C
TC 127 Earth-moving machinery ISO 15143-1: 2010 Earth-moving machinery and mobile road construction machinery – Worksite data exchange – Part 1: U System architecture ISO 15143-2: 2010 Earth-moving machinery and mobile road construction machinery – Worksite data exchange – Part 2: U Data dictionary
TC 130 Graphic technology ISO 12646: 2008/Amd * Graphic technology – Displays for colour proofing – Characteristics and viewing conditions – XZ 1: 2010 Amendment 1 ISO 15930-7: 2010 * Graphic technology – Prepress digital data exchange using PDF – Part 7: Complete exchange of N printing data (PDF/X-4) and partial exchange of printing data with external profile reference (PDF/X-4p) using PDF 1.6 ISO 15930-8: 2010 * Graphic technology – Prepress digital data exchange using PDF – Part 8: Partial exchange of printing G data using PDF 1.6 (PDF/X-5) ISO 16612-2: 2010 * Graphic technology – Variable data exchange – Part 2: Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and R PDF/VT-2)
TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO 10468: 2003/Amd * Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the long- term specific ring XZ 1: 2010 creep stiffness under wet conditions and calculation of the wet creep factor – Amendment 1 ISO 10471: 2003/Amd * Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the long- term ultimate bending XZ 1: 2010 strain and the long- term ultimate relative ring deflection under wet conditions – Amendment 1 ISO 14828: 2003/Amd * Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the long- term specific ring XZ 1: 2010 relaxation stiffness under wet conditions and calculation of the wet relaxation factor – Amendment 1 ISO/TS 21003-7:2008/ Multilayer piping systems for hot and cold water installations inside buildings – Part 7: Guidance for the XZ Amd 1:2010 assessment of conformity – Amendment 1 ISO/TS 26873: 2010 * Plastics pipes and fittings – Definition and construction procedures for reference lines C
TC 146 Air quality ISO 21438-3: 2010 Workplace atmospheres – Determination of inorganic acids by ion chromatography – Part 3: N Hydrofluoric acid and particulate fluorides ISO 25140:2010 Stationary source emissions – Automatic method for the determination of the methane concentration P using flame ionisation detection (FID)
TC 147 Water quality ISO 5667-22: 2010 * Water quality – Sampling – Part 22: Guidance on the design and installation of groundwater monitoring R points ISO 19250:2010 Water quality – Detection of Salmonella spp. L ISO 21338:2010 * Water quality – Kinetic determination of the inhibitory effects of sediment, other solids and coloured L samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test)
TC 160 Glass in building ISO 20492-3: 2010 * Glass in buildings – Insulating glass – Part 3: Gas concentration and gas leakage N ISO 20492-4: 2010 * Glass in buildings – Insulating glass – Part 4: Methods of test for the physical attributes of edge seals M
TC 163 Thermal performance and energy use in the built environment ISO 8301:1991/ Amd * Thermal insulation – Determination of steady-state thermal resistance and related properties – Heat XZ 1:2010 flow meter apparatus – Amendment 1
TC 165 Timber structures ISO 20152-1: 2010 * Timber structures – Bond performance of adhesives – Part 1: Basic requirements N ISO 22390:2010 * Timber structures – Laminated veneer lumber – Structural properties E
TC 171 Document management applications ISO 10244:2010 * Document management – Business process baselining and analysis E ISO 12029:2010 * Document management – Machine- readable paper forms – Optimal design for user friendliness and J electronic document management systems (EDMS)
TC 172 Optics and photonics ISO 11990-2: 2010 Lasers and laser-related equipment – Determination of laser resistance of tracheal tubes – Part 2: F Tracheal tube cuffs ISO 15529:2010 Optics and photonics – Optical transfer function – Principles of measurement of modulation transfer M function (MTF) of sampled imaging systems ISO 25297-1: 2010 * Optics and photonics – Electronic exchange of optical data – Part 1: NODIF information model X
TC 184 Automation systems and integration ISO/TS 13584-35:2010 * Industrial automation systems and integration – Parts library – Part 35: Implementation resources: XB Spreadsheet interface for parts library ISO 20242-2: 2010 * Industrial automation systems and integration – Service interface for testing applications – Part 2: W Resource management service interface
TC 194 Biological evaluation of medical devices ISO 10993-10: 2010 * Biological evaluation of medical devices – Part 10: Tests for irritation and skin sensitization V
TC 198 Sterilization of health care products ISO 20857:2010 * Sterilization of health care products – Dry heat – Requirements for the development, validation and U routine control of a sterilization process for medical devices
TC 201 Surface chemical analysis ISO 14237:2010 Surface chemical analysis – Secondary-ion mass spectrometry – Determination of boron atomic K concentration in silicon using uniformly doped materials ISO 18115-1: 2010 Surface chemical analysis – Vocabulary – Part 1: General terms and terms used in spectroscopy XA ISO 18115-2: 2010 Surface chemical analysis – Vocabulary – Part 2: Terms used in scanning-probe microscopy T
TC 204 Intelligent transport systems ISO 24534-1: 2010 * Automatic vehicle and equipment identification – Electronic registration identification (ERI) for D vehicles – Part 1: Architecture ISO 24534-2: 2010 * Automatic vehicle and equipment identification – Electronic registration identification (ERI) for J vehicles – Part 2: Operational requirements ISO 24534-3: 2010 * Automatic vehicle and equipment identification – Electronic registration identification (ERI) for P vehicles – Part 3: Vehicle data ISO 24534-4: 2010 * Automatic vehicle and equipment identification – Electronic registration identification (ERI) for X vehicles – Part 4: Secure communications using asymmetrical techniques
TC 213 Dimensional and geometrical product specifications and verification ISO/TS 16610-28:2010 Geometrical product specifications (GPS) – Filtration – Part 28: Profile filters: End effects J ISO/TS 16610-31:2010 Geometrical product specifications (GPS) – Filtration – Part 31: Robust profile filters: Gaussian F regression filters
TC 215 Health informatics ISO/TS 27527: 2010 * Health informatics – Provider identification W
TC 219 Floor coverings ISO 26986:2010 * Resilient floor coverings – Expanded (cushioned) poly(vinyl chloride) floor covering – Specification D
TC 229 Nanotechnologies ISO/TR 11360: 2010 Nanotechnologies – Methodology for the classification and categorization of nanomaterials M
TC 231 Project Committee: Brand valuation ISO 10668:2010 Brand valuation – Requirements for monetary brand valuation F
JTC 1 Information technology ISO/IEC 9995-3: 2010 Information technology – Keyboard layouts for text and office systems – Part 3: Complementary layouts F of the alphanumeric zone of the alphanumeric section ISO/IEC 10646: * Information technology – Universal Multiple-Octet Coded Character Set (UCS) – Amendment 7: R 2003/Amd 7: 2010 Mandaic, Batak, Brahmi, and other characters ISO/IEC 13818-1:2007/ * Information technology – Generic coding of moving pictures and associated audio information: L Amd 4:2009 Systems – Part 1: – Amendment 4: Transport of multiview video over Rec. ITU-T H.222.0 | ISO/IEC 13818-1 ISO/IEC 14443-2:2010 * Identification cards – Contactless integrated circuit cards – Proximity cards – Part 2: Radio frequency M power and signal interface ISO/IEC TR * Systems and software engineering – Systems and software assurance – Part 1: Concepts and X 15026-1:2010 vocabulary ISO/IEC 15419: 2009** Information technology – Automatic identification and data capture techniques – Bar code digital M imaging and printing performance testing ISO/IEC 15938-7:2003/ * Information technology – Multimedia content description interface – Part 7: Conformance testing – XZ Amd 5:2010 Amendment 5: Conformance testing for image signature tools ISO/IEC TR * Information technology – Telecommunications and information exchange between systems – Next M 16166:2010 Generation Corporate Networks (NGCN) – Security of session-based communications ISO/IEC TR * Information technology – Telecommunications and information exchange between systems – Next Q 16167:2010 Generation Corporate Networks (NGCN) – Emergency calls ISO/IEC 19763-3:2010 * Information technology – Metamodel framework for interoperability (MFI) – Part 3: Metamodel for Q ontology registration ISO/IEC 19784-1:2006/ * Information technology – Biometric application programming interface – Part 1: BioAPI specification – T Amd 3:2010 Amendment 3: Support for interchange of certificates and security assertions, and other security aspects ISO/IEC 19785-4:2010 * Information technology – Common Biometric Exchange Formats Framework – Part 4: Security block J format specifications ISO/IEC * Information technology – Multimedia application format (MPEG-A) – Part 12: Interactive music M 23000-12:2010 application format ISO/IEC 23000-3:2007/ * Information technology – Multimedia application format (MPEG-A) – Part 3: MPEG photo player XZ Amd 2:2010 application format – Amendment 2: Conformance testing for photo player application format ISO/IEC 23000-9:2008/ * Information technology – Multimedia application format (MPEG-A) – Part 9: Digital Multimedia L Amd 1:2010 Broadcasting application format – Amendment 1: Conformance and reference software ISO/IEC 24723: 2010 * Information technology – Automatic identification and data capture techniques – GS1 Composite bar S code symbology specification ISO/IEC 24791-1:2010 * Information technology – Radio frequency identification (RFID) for item management – Software K system infrastructure – Part 1: Architecture ISO/IEC 25045: 2010 * Systems and software engineering – Systems and software Quality Requirements and Evaluation R (SQuaRE) – Evaluation module for recoverability ISO/IEC TR * Systems and software engineering – Systems and software product Quality Requirements and L 25060:2010 Evaluation (SQuaRE) – Common Industry Format (CIF) for usability: General framework for usability- related information ISO/IEC 27005: 2008** Information technology – Security techniques – Information security risk management U ISO/IEC 29199-4:2010 * Information technology – JPEG XR image coding system – Part 4: Conformance testing K ISO/IEC 29199-5:2010 * Information technology – JPEG XR image coding system – Part 5: Reference software E ISO/IEC 29500-1:2008/ * Information technology – Document description and processing languages – Office Open XML File XZ Amd 1:2010 Formats – Part 1: Fundamentals and Markup Language Reference – Amendment 1 ISO/IEC 29500-4:2008/ * Information technology – Document description and processing languages – Office Open XML File XZ Amd 1:2010 Formats – Part 4: Transitional Migration Features – Amendment 1 ISO/IEC 29881: 2010 * Information technology – Systems and software engineering – FiSMA 1.1 functional size measurement H method
Standards confirmed
The following International Standards are confirmed for a five year period:
TC 8 Ships and marine technology ISO 4175:1979 (reconfirmed) TC 17 Steel ISO 3755:1991 (reconfirmed) ISO 4990:2003 ISO 4991:2005 ISO 4992-1:2006 ISO 4992-2:2006 ISO 7900:2006 ISO 7989-1:2006 ISO 9477:1992 (reconfirmed) ISO 11972:1998 ISO 11973:1999 (reconfirmed) ISO 13521:1999 (reconfirmed) ISO 13583-2:2003 ISO 14737:2003 ISO 16468:2005 ISO 19959:2005 ISO 19960:2005 ISO 23717:2006 TC 18 Zinc and zinc alloys ISO 301:2006 ISO 752:2004 ISO 15201:2006 TC 22 Road vehicles ISO 4151:1987 (reconfirmed) ISO 8705:2005 ISO 9131:1993 (reconfirmed) ISO 10487-2:1995 (reconfirmed) ISO 12366:2001 ISO 14722:1998 (reconfirmed) TC 23 Tractors and machinery for agriculture and forestry ISO 4004:1983 (reconfirmed) ISO 4252:2007 ISO 4253:1993 (reconfirmed) ISO 5670:1984 (reconfirmed) ISO 5673-1:2005 ISO 5673-2:2005 ISO 5676:1983 (reconfirmed) ISO 5711:1995 (reconfirmed) ISO 7072:1993 (reconfirmed) ISO 8759-1:1998 (reconfirmed) ISO 8759-2:1998 (reconfirmed) ISO 8935:1990 (reconfirmed) ISO 9912-1:2004 ISO 10448:1994 (reconfirmed) ISO 11001-1:1993 (reconfirmed) ISO 11001-2:1993 (reconfirmed) ISO 11001-4:1994 (reconfirmed) ISO 11471:1995 (reconfirmed) ISO 11678:1996 (reconfirmed) ISO/TR 12369:1994 (reconfirmed) ISO 16149:2006 ISO 16154:2005 ISO 17567:2005 ISO 23205:2006 ISO 23206:2005 ISO 24347:2005 TC 25 Cast irons and pig irons ISO 185:2005 ISO 946:1975 (reconfirmed) ISO 21988:2006 TC 28 Petroleum products and lubricants ISO 8943:2007 TC 29 Small tools ISO 2351-1:2007 TC 33 Refractories ISO 12676:2000 (reconfirmed) TC 34 Food products ISO 663:2007 ISO 3960:2007 ISO 4121:2003 ISO 6320:2000 (reconfirmed) ISO 6883:2007 ISO 8534:2008 ISO 8587:2006 ISO 11035:1994 (reconfirmed) ISO 11056:1999 (reconfirmed) ISO 13299:2003 ISO 15302:2007 ISO 15774:2000 (reconfirmed) TC 35 Paints and varnishes ISO 7142:2007 ISO 7143:2007 ISO 10283:2007 ISO 11909:2007 TC 37 Terminology and other language and content resources ISO 639-2:1998 (reconfirmed) ISO 639-3:2007 ISO 1951:2007 TC 38 Textiles ISO 105-J05:2007 TC 44 Welding and allied processes ISO 14731:2006 ISO 15792-1:2000 (reconfirmed) ISO 15792-2:2000 (reconfirmed) TC 45 Rubber and rubber products ISO 34-2:2007 ISO 1419:1995 (reconfirmed) ISO 1629:1995 (reconfirmed) ISO 3136:1983 (reconfirmed) ISO 3900:1995 (reconfirmed) ISO 4638:1984 (reconfirmed) ISO 4645:1984 (reconfirmed) ISO 4651:1988 (reconfirmed) ISO 5981:2007 ISO 6225-2:1990 (reconfirmed) ISO 6235:1995 (reconfirmed) ISO 6452:2007 ISO 6528-3:1988 (reconfirmed) ISO 6916-1:1995 (reconfirmed) ISO 7269:1995 (reconfirmed) ISO 7780:1998 (reconfirmed) ISO 7854:1995 (reconfirmed) ISO 8053:1995 (reconfirmed) ISO 10398:1998 (reconfirmed) ISO 11752:2000 (reconfirmed) ISO 12965:2000 (reconfirmed) ISO 14558:2000 (reconfirmed) ISO 15672:2000 (reconfirmed) ISO 17052:2007 ISO 23337:2007 TC 61 Plastics ISO 527-3:1995 (reconfirmed) ISO 974:2000 (reconfirmed) ISO 2039-2:1987 (reconfirmed) ISO 3146:2000 (reconfirmed) ISO 6603-1:2000 (reconfirmed) ISO 6603-2:2000 (reconfirmed) ISO 7823-3:2007 ISO 10350-1:2007 ISO 11501:1995 (reconfirmed) ISO 11502:1995 (reconfirmed) ISO 13586:2000 (reconfirmed) ISO 13894-1:2000 (reconfirmed) ISO 15013:2007 ISO 15014:2007 ISO 15105-1:2007 ISO 15166-2:2000 (reconfirmed) ISO 15605:2000 (reconfirmed) ISO 18872:2007 ISO 19712-2:2007 ISO 19712-3:2007 ISO 29862:2007 ISO 29863:2007 ISO 29864:2007 TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO 13879:1999 (reconfirmed) ISO 13880:1999 (reconfirmed) ISO 14224:2006 ISO 16708:2006 ISO 19903:2006 TC 70 Internal combustion engines ISO 15550:2002 TC 83 Sports and recreational equipment ISO 11088:2006 TC 91 Surface active agents ISO 456:1973 (reconfirmed) ISO 457:1983 (reconfirmed) ISO 607:1980 (reconfirmed) ISO 672:1978 (reconfirmed) ISO 673:1981 (reconfirmed) ISO 684:1974 (reconfirmed) ISO 685:1975 (reconfirmed) ISO 697:1981 (reconfirmed) ISO 862:1984 (reconfirmed) ISO 893:1989 (reconfirmed) ISO 894:1977 (reconfirmed) ISO 895:1977 (reconfirmed) TC 92 Fire safety ISO/TR 12471:2004 TC 102 Iron ore and direct reduced iron ISO 3084:1998 (reconfirmed) ISO 13312:2006 ISO 13313:2006 TC 104 Freight containers ISO 10368:2006 TC 107 Metallic and other inorganic coatings ISO 4528:2000 ISO 4532:1991 (reconfirmed) ISO 6370-1:1991 (reconfirmed) ISO 6370-2:1991 (reconfirmed) ISO 8291:1986 (reconfirmed) ISO 8401:1986 (reconfirmed) ISO 9220:1988 (reconfirmed) ISO 13805:1999 ISO 13807:1999 TC 113 Hydrometry ISO 1070:1992 (reconfirmed) ISO/TS 3716:2006 ISO 4364:1997 (reconfirmed) ISO 9195:1992 (reconfirmed) TC 114 Horology ISO 1413:1984 (reconfirmed) ISO 3160-1:1998 (reconfirmed) ISO 3765:1998 (reconfirmed) ISO 9701:1994 (reconfirmed) ISO 10552:1999 (reconfirmed) TC 122 Packaging ISO 4178:1980 (reconfirmed) TC 132 Ferroalloys ISO 4139:1979 (reconfirmed) ISO 4140:1979 (reconfirmed) ISO 7087:1984 (reconfirmed) ISO 7692:1983 (reconfirmed) ISO 7693:1984 (reconfirmed) ISO 10386:1994 (reconfirmed) ISO 10387:1994 (reconfirmed) TC 146 Air quality ISO 16000-5:2007 ISO/TR 27628:2007 TC 150 Implants for surgery ISO 5832-1:2007 ISO 5832-12:2007 ISO 5832-14:2007 ISO 5832-9:2007 ISO 5838-2:1991 (reconfirmed) ISO 5838-3:1993 (reconfirmed) ISO 6475:1989 (reconfirmed) ISO 8319-1:1996 (reconfirmed) ISO 8319-2:1986 (reconfirmed) ISO 9268:1988 (reconfirmed) ISO 9269:1988 (reconfirmed) ISO 10334:1994 (reconfirmed) ISO 12189:2008 ISO 14607:2007 ISO 18192-1:2008 TC 155 Nickel and nickel alloys ISO 6501:1988 (reconfirmed) ISO 8049:1988 (reconfirmed) ISO 8050:1988 (reconfirmed) TC 159 Ergonomics ISO 20282-1:2006 ISO/TS 20282-2:2006 TC 172 Optics and photonics ISO 9342-2:2005 ISO 9385:1990 (reconfirmed) ISO 9689:1990 (reconfirmed) ISO 10937:2000 (reconfirmed) ISO 10939:2007 ISO 11380:1994 (reconfirmed) ISO 11381:1994 (reconfirmed) ISO 11455:1995 (reconfirmed) ISO 11884-2:2007 ISO 11979-5:2006 ISO 12844:1999 (reconfirmed) ISO 12866:1999 (reconfirmed) ISO 15227:2000 (reconfirmed) ISO 18369-1:2006 ISO 18369-3:2006 ISO 18369-4:2006 TC 193 Natural gas ISO 12213-3:2006 ISO 15403-1:2006 ISO 23874:2006 TC 201 Surface chemical analysis ISO 15470:2004 ISO 15471:2004 ISO 17973:2002 ISO 17974:2002 ISO 18116:2005 ISO 21270:2004 ISO 22048:2004 ISO 24236:2005 ISO 24237:2005 TC 204 Intelligent transport systems ISO 17361:2007 ISO/PAS 17684:2003 TC 207 Environmental management ISO 14040:2006 ISO 14044:2006 ISO 14063:2006 TC 226 Materials for the production of primary aluminium ISO 18515:2007 ISO 23202:2006 JTC 1 Information technology ISO 1001:1986 (reconfirmed) ISO 1860:1986 (reconfirmed) ISO 2258:1976 (reconfirmed) ISO 2775:1977 (reconfirmed) ISO 7929:1985 (reconfirmed) ISO/IEC 2382-15: 1999 (reconfirmed) ISO/IEC 2382-29: 1999 (reconfirmed) ISO/IEC 8441-1:1991 (reconfirmed) ISO/IEC 10164-20: 1999 (reconfirmed)
Standards withdrawn
Period from 06 July to 24 August 2010
TC 21 Equipment for fire protection and fire fighting ISO 11602-1:2000 (replaced by ISO/TS 11602-1:2010) ISO 11602-2:2000 (replaced by ISO/TS 11602-2:2010) TC 22 Road vehicles ISO/TR 15031-2: 2004 (replaced by ISO 15031-2:2010) TC 29 Small tools ISO 5610:1998 (replaced by ISO 5610-1:2010 & ISO 5610-2:2010 & ISO 5610-3:2010 & ISO 5610-4:2010 & ISO 5610-5:2010 & ISO 5610-6:2010 & ISO 5610-7: 2010 & ISO 5610-8:2010 & ISO 5610-9:2010 & ISO 5610-10:2010 & ISO 5610-11:2010 & ISO 5610-12:2010 & ISO 5610-13:2010 & ISO 5610-14:2010 & ISO 5610-15:2010) ISO 9270:1992 (replaced by ISO 9270-1:2010 & ISO 9270-2: 2010) TC 34 Food products ISO 8261:2001 (replaced by ISO 6887-5:2010) TC 43 Acoustics ISO 140-1:1997 (replaced by ISO 10140-5:2010 & ISO 10140-2: 2010 & ISO 10140-3:2010 & ISO 10140-4:2010 & ISO 10140-1:2010) ISO 140-10:1991 (replaced by ISO 10140-5:2010 & ISO 10140-2: 2010 & ISO 10140-3:2010 & ISO 10140-4:2010 & ISO 10140-1:2010) ISO 140-11:2005 (replaced by ISO 10140-5:2010 & ISO 10140-2: 2010 & ISO 10140-3:2010 & ISO 10140-4:2010 & ISO 10140-1:2010) ISO 140-16:2006 (replaced by ISO 10140-5:2010 & ISO 10140-2: 2010 & ISO 10140-3:2010 & ISO 10140-4:2010 & ISO 10140-1:2010) ISO 140-3:1995 (replaced by ISO 10140-5:2010 & ISO 10140-2: 2010 & ISO 10140-3:2010 & ISO 10140-4:2010 & ISO 10140-1:2010) ISO 140-6:1998 (replaced by ISO 10140-5:2010 & ISO 10140-2: 2010 & ISO 10140-3:2010 & ISO 10140-4:2010 & ISO 10140-1:2010) ISO 140-8:1997 (replaced by ISO 10140-5:2010 & ISO 10140-2: 2010 & ISO 10140-3:2010 & ISO 10140-4:2010 & ISO 10140-1:2010) ISO 3891:1978 TC 89 Wood-based panels ISO 2695:1976 ISO 2696:1976 ISO 3729:1976 TC 112 Vacuum technology ISO 2861-2:1980 TC 114 Horology ISO 2281:1990 (replaced by ISO 22810:2010) TC 146 Air quality ISO 8762:1988 TC 147 Water quality ISO 6340:1995 (replaced by ISO 19250:2010) TC 171 Document management applications ISO/TS 12029: 2007 (replaced by ISO 12029:2010) TC 201 Surface chemical analysis ISO 18115:2001 (replaced by ISO 18115-1:2010 & ISO 18115-2: 2010) TC 204 Intelligent transport systems ISO/TS 24534-1: 2007 (replaced by ISO 24534-1:2010) ISO/TS 24534-2: 2007 (replaced by ISO 24534-2:2010) ISO/TS 24534-3: 2008 (replaced by ISO 24534-3:2010) ISO/TS 24534-4: 2008 (replaced by ISO 24534-4:2010) JTC 1 Information technology ISO/IEC 13813: 1998