Generation of Singlet Oxygen (1O ) from Hydrogen Peroxide

Total Page:16

File Type:pdf, Size:1020Kb

Generation of Singlet Oxygen (1O ) from Hydrogen Peroxide DOI 10.1515/pac-2013-0812 Pure Appl. Chem. 2014; 86(6): 945–952 Conference paper Erbay Kalay, Hamdullah Kılıç*, Mustafa Catir, Murat Cakici and Cavit Kazaz 1 Generation of singlet oxygen ( O2) from hydrogen peroxide decomposition by in situ generated hypervalent iodoarene reagents Abstract: A novel method for the production of singlet oxygen from H2O2 was developed. A combina- tion of iodoarene (ArI), methyltrioxorhenium (MTO), and H2O2 in the presence of pyridine as the co- 1 catalyst efficiently produced singlet molecular oxygen ( O2) under biphasic conditions. The existence of 1 O2 was demonstrated by trapping experiments with aromatic dienes, 1,3-cyclodienes, and alkenes. The 1 mechanism of O2 production from the iodoarene/MTO/35 % H2O2 system and the reaction scope was also discussed. Keywords: catalysis; homogeneous catalysis; hypervalent compounds; IUPAC Congress-44; Chemical Syn- thesis; oxidation; oxygen; oxygenation; peroxides; radicals; singlet oxygen. *Corresponding author: Hamdullah Kılıç, Faculty of Science, Department of Chemistry, Ataturk University, 25240 Erzurum, Turkey, e-mail: [email protected] Erbay Kalay, Murat Cakici and Cavit Kazaz: Faculty of Science, Department of Chemistry, Ataturk University, 25240 Erzurum, Turkey Mustafa Catir: Faculty of Arts and Sciences, Department of Chemistry, Erzincan University, 24100 Erzincan, Turkey Article note: A collection of invited papers based on presentations on the Chemical Synthesis theme at the 44th IUPAC Congress, Istanbul, Turkey, 11–16 August 2013. Introduction 1 Oxyfunctionalization of organic substances with singlet molecular oxygen ( O2) has received significant atten- tion, both from the academic and industrial points of view, as it is an important method for the construction 1 of the carbon–oxygen bond [1]. More importantly, O2 is a well-established oxidant in photodynamic therapy, 1 which is widely used to treat some malignant cancers [2]. The common method of generating O2, dye-sensi- tized excitation of triplet molecular oxygen, can be challenging when applied to industrial-scale production, because of the need for specially designed photochemical reactors and materials for safe processing [3]. This 1 problem is partially solved by the availability of various chemical sources of O2 that also allow for precise 1 control of the O2 concentration over the substrate amount [4–6]. Recently, we introduced a novel protocol for 1 3 the generation of O2 via H2O2 decomposition by hypervalent aryl-λ -iodane phenyliodine bis(trifluoroacetate) (PIFA) 1a (Scheme 1) [7]. A key feature of this protocol is the oxidation of H2O2 with 1a to give a reactive interme- diate hydrogen tetraoxide (H2O4), which subsequently undergoes homolytic dissociation to singlet oxygen and 1 H2O2. Inspired by the mechanism underlying O2 generation from the PIFA/H2O2 system, we hypothesized that if a hypervalent aryl-λ3-iodane reagent such as an iodosylarene (ArIO) is generated in situ by the oxidation of 1 an iodoarene, subsequent oxidation of H2O2 with this reactive species would produce O2. Thus, we needed to develop a protocol in which H2O2 would first oxidize the iodoarene to an iodosylarene and finally reduce iodo- 1 sylarene to iodoarene, thereby producing O2. Unfortunately, direct oxidation of the iodine atom of the arene using H2O2 is not possible, and therefore, H2O2 must be activated by a catalyst for efficient oxygen transfer. © 2014 IUPAC & De Gruyter 946 E. Kalay et al.: Chemical generation of singlet oxygen from H2O2 3 1 (λ =1270nm) hν + O2 O2 + H2O2 2H2O2 H2O4 PhI(OCOCF3)2 PhI + 2TFA 1a Scheme 1 Singlet oxygen generation from the PIFA (1a)/H2O2 system. Herein, we report the first example of the methyltrioxorhenium (MTO) [8]-catalyzed in situ generation of an iodosylarene (ArIO) from an iodoarene and H2O2, followed by subsequent reaction with H2O2 to produce 1 O2 (eq. 1). MeReO3, H2O2 H2O2 1 + ArI ArIO O2 ArI (1) Oxidation Reduction Results and discussion At the outset of our study, we chose the oxidation of iodobenzene (4a, 1 equiv, Fig. 1) with the MTO/35 % H2O2 (0.05 equiv/10 equiv) system [9] at ambient temperature in dichloromethane (DCM) as a model reaction 1 in order to monitor O2 generation in the presence of 9,10-dimethylanthracene (DMA, 2a) as the chemical 1 trap. The results are summarized in Table 1. The 4a/MTO/35 % H2O2 combination afforded O2, as evidenced by the formation of 3a [10] in 20 % yield (entry 1). It is important to note that in the absence of the 4a, a 1 complex mixture was obtained, indicating that the 4a is essential for the O2 generation. To improve the level of conversion through MTO stabilization [11], a series of tertiary amines – imidazole, 2,6-dimethylpyridine, phenanthroline, N-methylimidazole, and pyridine – were tested for use as the co-catalyst (entries 2–6). The results showed that pyridine had a significant influence on the reaction rate and the yield of 3a (entry 6). Next, attempts were made to further optimize the reaction conditions by screening a series of iodoarenes 4b–n [12] (Fig. 1). Depending on the structure of the iodoarene, the conversion and yield varied from 56 to 98 % and from 26 to 86 %, respectively (Table 1, entries 7–18). The highest efficiency in terms of yield and conversion was achieved with 2-iodomesitylene (MesI, 4d) (entry 9). Thus, we concluded that the best choice of iodoarene and co-catalyst would be the 4d and pyridine, respectively, for obtaining endoperoxide 3a in high yield with a high conversion. It is well known that MTO [8] is a very efficient catalyst for olefin epoxidation with H2O2 as the oxidant. Hence, we must take into account the chemoselectivity of the present oxidation system in terms of epoxide 4a,R1 =R2 =R3 =H 1 R 4b,R1 =R2 =H,R3 =Me I 4c,R1 =H,R2 =Me, R3 =H 4d,R1 =R2 =R3 =Me R3 R2 4e,R1 =R2 =H,R3 =OMe 4a–m 4f,R1 =H,R2 =OMe,R3 =H 1 2 3 R1 4g,R=H,R =R =OMe 4h,R1 =R2 =H,R3 =Cl 4i,R1 =H,R2 =Cl, R3 =H R4 R2 4k,R1 =R2 =H,R3 =Br 4l,R1 =R2 =H,R3 =F 3 R 1 2 3 4m,R=R =H,R =CF3 4n 1 2 3 4 4n,R=R =R =R = p-IC6H4 Fig. 1 Structure of iodoarenes (ArI, 4a–n) employed in this study. E. Kalay et al.: Chemical generation of singlet oxygen from H2O2 947 1 a Table 1 Reaction conditions for O2 generation from the ArI/MTO/35 % H2O2 system. Me ArI/MTO/ Me 35 %H2O2, co-catalyst O O CH2Cl2,rt, 6h Me Me 2a 3a Entry ArI Co-catalyst Conversionb (%) Yieldb (%) 1 4a None 44 20 2 4a Imidazole 66 46 3 4a 2,6-Dimethylpyridine 70 40 4 4a Phenanthroline 72 50 5 4a N-Methylimidazole 82 62 6 4a Pyridine 96 70 7 4b Pyridine 70 50 8 4c Pyridine 98 66 9 4d Pyridine 90 86 10 4e Pyridine 66 42 11 4f Pyridine 80 58 12 4g Pyridine 96 78 13 4h Pyridine 72 44 14 4i Pyridine 56 26 15 4k Pyridine 92 56 16 4l Pyridine 92 72 17 4m Pyridine 86 56 18 4n Pyridine 80 54 a Reaction conditions: iodoarene (4, 1 mmol); MTO (0.05 mmol); co-catalyst (0.25 mmol); 35 % H2O2 (10 mmol); DMA (2a,1 mmol); 6 h; rt. bConversions and yields were assessed by 1H NMR analysis with diphenylmethane as internal standard. formation vs. peroxide formation in the presence of olefin substrates. To assess the synthetic feasibility and chemoselectivity of the present oxidation system, oxidation of a set of substrates, including aromatic dienes 2a–d, 1,3-cyclodienes 2e–g, and alkenes 2h,i, was examined. The results are listed in Table 2. In order to minimize epoxide formation and shift the balance in favor of iodine oxidation, an essential 1 step for O2 generation, the reaction conditions were reoptimized to include the 4d/MTO/35 % H2O2/pyridine in 4:0.1:15:0.5 ratio relative to substrate 2. When 2a was exposed to the chemical peroxidation conditions, complete conversion of the starting material was observed, and the corresponding endoperoxide 3a [10] was obtained in 94 % yield (entry 1). With 2b, fast oxygenation occurred, as indicated by the disappearance of the intense color of the starting material and the formation of 3b [13] (entry 2). The relatively less reactive sub- strate 2c was oxygenated to 3c [14] but with a slightly lower yield of 48 % at 60 % conversion (entry 3). The phenolic substrate 2d (entry 4) gave a low yield of hydroperoxide 3d [15], with 45 % conversion. Oxygenation of α-terpinene (2e) at complete consumption gave ascaridole (3e) [16] in 75 % yield, along with p-cymene (5a) in 80:20 ratio (entry 5). Likewise, 1,3-cyclohexadiene (2f) was transformed into the corresponding endoper- oxide 3f [17] in high yield (72 %), along with benzene (5b) as the byproduct (entry 6). Aromatic products 5a,b were formed by oxidation of the starting material with the in situ generated iodosylmesytilene (MesIO, 10) [18] species, as confirmed by a control experiment involving 1,3-cyclodienes 2e,f and 10. Notably, no trace of epoxide resulting from the starting materials 2e,f or products 3e,f was detected by NMR analysis. Oxidation of 2g gave endoperoxide 3g [19] in high yield (87 %), with an appreciable amount of epoxide 6a [20] in 93:7 ratio (entry 7). An electron-rich alkene, 2,3-dimethyl-2-butene (2h), when subjected to the established reac- tion conditions afforded a mixture of oxidized products consisting of allylic hydroperoxide 3h [21], allylic alcohol 7a [21], and epoxide 6b [22] (entry 8). The formation of 7a can be rationalized in terms of the reduction of 3h under the reaction conditions.
Recommended publications
  • Transparent Photochemistry: Infrared Photosensitizers and Singlet Oxygen Microscopy
    Transparent Photochemistry: Infrared photosensitizers and singlet oxygen microscopy Elsa Fernanda Freitas da Silva Tese orientada por: Luís Guilherme da Silva Arnaut Moreira e Peter Remsen Ogilby Universidade de Coimbra Tese de Doutoramento em Química, especialidade Fotoquímica apresentada ao Departamento de Química da Faculdade de Ciências e tecnologia da Universidade de Coimbra. Coimbra, Julho de 2013 Acknowledgements This dissertation is the result of joint efforts, collaborations and help by many people. I want to express my appreciation to my supervisor, Professor Luis G. Arnaut, for his guidance, support and availability. His enthusiasm with science and motivation are an example to me. It has been a great pleasure to work in his group. To my group of colleagues in Coimbra: Rui Nunes, Gonçalo Sá, Ligia Silva, Hélder Tão, I want to thank you all for the support and fellowship. Specially, I want to thank Carlos Serpa for his availability to help and assistance me with the laser systems and, Fábio Schaberle for his assistance with photoacoustic calorimetry experiments and for been actively interested on my work providing me with great comments that were valued greatly. My special thanks to Professor Peter R. Ogilby for accepting to be my co-supervisor and give me the opportunity to work with different techniques in his laboratory in the University of Aarhus in Denmark. Peter valuable suggestions have greatly improved my scientific work. I have had a great time working in COMIs group. I want to thank all COMI group members whom I have encountered during my stay, for their great support and welcoming. Brian Wett for walking me through the laboratory on my first times.
    [Show full text]
  • States of Oxygen Liquid and Singlet Oxygen Photodynamic Therapy
    Oxygen States of Oxygen As far as allotropes go, oxygen as an element is fairly uninteresting, with ozone (O3, closed-shell and C2v symmetric like SO2) and O2 being the stable molecular forms. Most of our attention today will be devoted to the O2 molecule that is so critically connected with life on Earth. 2 2 2 4 2 O2 has the following valence electron configuration: (1σg) (1σu) (2σg) (1πu) (1πg) . It is be- cause of the presence of only two electrons in the two π* orbitals labelled 1πg that oxygen is paramagnetic with a triplet (the spin multiplicity \triplet" is given by 2S+1; here S, the total spin quantum number, is 0.5 + 0.5 = 1). There are six possible ways to arrange the two electrons in the two degenerate π* orbitals. These different ways of arranging the electrons in the open shell are called \microstates". Further, because there are six microstates, we can say that the total degeneracy of the electronic states 2 3 − arising from (1πg) configuration must be equal to six. The ground state of O2 is labeled Σg , the left superscript 3 indicating that this is a triplet state. It is singly degenerate orbitally and triply degenerate in terms of spin multiplicity; the total degeneracy (three for the ground state) is given by the spin times the orbital degeneracy. 1 The first excited state of O2 is labeled ∆g, and this has a spin degeneracy of one and an orbital degeneracy of two for a total degeneracy of two. This state corresponds to spin pairing of the electrons in the same π* orbital.
    [Show full text]
  • The Photochemistry of Tetramethyl-3-Thio-1,3-Cyclobutanedione
    South Dakota State University Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange Electronic Theses and Dissertations 1972 The Photochemistry of tetramethyl-3-thio-1,3-cyclobutanedione Mason Ming-Sun Shen Follow this and additional works at: https://openprairie.sdstate.edu/etd Recommended Citation Shen, Mason Ming-Sun, "The Photochemistry of tetramethyl-3-thio-1,3-cyclobutanedione" (1972). Electronic Theses and Dissertations. 4833. https://openprairie.sdstate.edu/etd/4833 This Thesis - Open Access is brought to you for free and open access by Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange. It has been accepted for inclusion in Electronic Theses and Dissertations by an authorized administrator of Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange. For more information, please contact [email protected]. THE PHarOCHEMISTRY OF TETRAMETHYL-3-THIO-l,J-CYCLOBUTANEDIONE BY MASON MING-SUN SHEN A thesis submitted in partial fulfillment of the requirements for tne degree Master of Science, Major - in Chemistry, South Dakota State University 1972 SOUTH DAKOTA STATE UNIVERSITY LIBRAR fer -th:Ls -7 - - -- -07 -­ D;;;/:...; TO MY PARENTS PHOTOCHEMISTRY OF THE TETRAMETHYL-)-THI0-1,)-CYCLOBUTANEDIONE Abstract MASON MING-SUN SHEN Under the supervision of Professor James J. Worman photochemical reaction of tetramethyl-3-thio-i.l,3-cyclo­ The butanedione in the presence of oxygen and light yields tetramethyl-1, )-cyclobutanedione and sulfur dioxide. kinetics and mechanism of the reaction have been studied The thoroughly in different solvents and at different concentrations. Results this study indicate that the mechanism probably involves· of singlet oxygen and state thione although triplet thione and ground triplet xygen are not completely eliminated.
    [Show full text]
  • Mechanochemical Generation of Singlet Oxygen†
    RSC Advances View Article Online PAPER View Journal | View Issue Mechanochemical generation of singlet oxygen† a a a a Cite this: RSC Adv., 2020, 10,9182 Abdurrahman Turksoy,‡ Deniz Yildiz, ‡ Simay Aydonat, ‡ Tutku Beduk, Merve Canyurt,a Bilge Baytekin*a and Engin U. Akkaya *b Controlled generation of singlet oxygen is very important due to its involvement in scheduled cellular maintenance processes and therapeutic potential. As a consequence, precise manipulation of singlet oxygen release rates under mild conditions, is crucial. In this work, a cross-linked polyacrylate, and a polydimethylsiloxane elastomer incorporating anthracene-endoperoxide modules with chain extensions at the 9,10-positions were synthesized. We now report that on mechanical agitation in Received 28th January 2020 cryogenic ball mill, fluorescence emission due to anthracene units in the PMA (polymethacrylate) Accepted 21st February 2020 polymer is enhanced, with a concomitant generation of singlet oxygen as proved by detection with DOI: 10.1039/d0ra00831a a selective probe. The PDMS (polydimethylsiloxane) elastomer with the anthracene endoperoxide rsc.li/rsc-advances mechanophore, is also similarly sensitive to mechanical force. Creative Commons Attribution-NonCommercial 3.0 Unported Licence. Introduction The stability of the endoperoxides differ widely, and in a large number of 2-pyridone, naphthalene and anthracene Singlet oxygen refers to the lowest energy excited state of the endoperoxides, high yield release of singlet oxygen without side 8 molecular oxygen. Since the direct excitation of the ground state reactions was documented. As a matter of fact, the diversity in oxygen is forbidden by spin, symmetry and parity rules, it is the rates of cycloreversion reactions may eventually prove to be most commonly generated by photosensitization, making use very useful for ne tuning a biologically relevant singlet oxygen of the intermediacy of photosensitizer organic compounds with release.
    [Show full text]
  • Photoactivity and Optical Applications of Organic Materials Containing Selenium and Tellurium Cite This: Chem
    Chemical Science View Article Online MINIREVIEW View Journal | View Issue Photoactivity and optical applications of organic materials containing selenium and tellurium Cite this: Chem. Sci.,2019,10,9182 a ab All publication charges for this article Gabrielle C. Hoover and Dwight S. Seferos * have been paid for by the Royal Society of Chemistry Sulfur-containing compounds, particularly derivatives of thiophene, are well studied for organic optoelectronic applications. Incorporating selenium or tellurium in place of sulfur imparts different physical properties due to the fundamental differences of these atoms relative to their lighter analogues. This has a profound influence on the properties of molecules and materials that incorporate chalcogens Received 23rd August 2019 that may ultimately lead to new opportunities and applications. This mini-review will focus on the Accepted 18th September 2019 quantitative and qualitative photophysical characteristics of organic materials containing selenium and DOI: 10.1039/c9sc04279b tellurium as well as their emerging applications as molecular photoactive species, including light- rsc.li/chemical-science emitting sensors, triplet sensitizers, and beyond. Creative Commons Attribution 3.0 Unported Licence. 1. Introduction has focused on semiconductor lms or nanocrystals such as CdSe or PbSe quantum dots or CdTe.6–12 In between lie classes of The chalcogens (O, S, Se, and Te) have attracted considerable organochalcogens, where selenium and tellurium have been attention for materials applications in the last few decades. In judiciously placed into otherwise organic materials. Such 13 14 the polymer electronics communities substantial attention has materials have been used as photovoltaics, transistors, 15 16 focused on the synthesis and properties of polythiophenes and thermoelectric generators, light emitting devices, and 17 their derivatives.1–5 In the inorganic materials space, much work sensors.
    [Show full text]
  • Applications of Triplet-Photosensitizers and Development of Photochemical Methods
    Portland State University PDXScholar Dissertations and Theses Dissertations and Theses 1-14-2020 Applications of Triplet-Photosensitizers and Development of Photochemical Methods Luke V. Lutkus Portland State University Follow this and additional works at: https://pdxscholar.library.pdx.edu/open_access_etds Part of the Chemistry Commons Let us know how access to this document benefits ou.y Recommended Citation Lutkus, Luke V., "Applications of Triplet-Photosensitizers and Development of Photochemical Methods" (2020). Dissertations and Theses. Paper 5417. https://doi.org/10.15760/etd.7290 This Dissertation is brought to you for free and open access. It has been accepted for inclusion in Dissertations and Theses by an authorized administrator of PDXScholar. Please contact us if we can make this document more accessible: [email protected]. Applications of Triplet-Photosensitizers and Development of Photochemical Methods by Luke V. Lutkus A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Chemistry Dissertation Committee: Theresa McCormick, Chair Mark Woods Rob Strongin Erik Sanchez Portland State University 2020 Abstract Photochemistry focuses on various aspects of the interaction of light with molecules. This work entails new methodology for fundamental measurements of photochemistry along with novel applications of triplet-photosenstizers. Herein described are two separate methodologies developed for the determination of the quantum yield. A method for the singlet oxygen quantum yield was developed that utilizes the reaction between singlet oxygen and dimethyl sulfoxide (DMSO) to produce dimethyl sulfone. The rate of the reaction is measured by the pressure decrease that results from the consumption of oxygen from the headspace of a sealed system.
    [Show full text]
  • Using Singlet Oxygen to Synthesize Natural Products and Drugs † ‡ † ‡ Ashwini A
    Review pubs.acs.org/CR Using Singlet Oxygen to Synthesize Natural Products and Drugs † ‡ † ‡ Ashwini A. Ghogare , and Alexander Greer*, , † Department of Chemistry, Brooklyn College, 2900 Bedford Avenue, Brooklyn, New York 11210, United States ‡ Ph.D. Program in Chemistry, The Graduate Center of the City University of New York, 365 Fifth Avenue, New York, New York 10016, United States 1 ABSTRACT: This Review describes singlet oxygen ( O2) in the organic synthesis of 1 1 targets on possible O2 biosynthetic routes. The visible-light sensitized production of O2 is not only useful for synthesis; it is extremely common in nature. This Review is intended to draw a logical link between flow and batch reactionsa combination that leads to the 1 current state of O2 in synthesis. CONTENTS 5.5.1. Bubbling Photoreactor Using a Dissolved Sensitizer 10022 1. INTRODUCTION 9994 5.5.2. Bubbling Photoreactor Using a 2. BACKGROUND 9994 “Shielded” Heterogeneous Sensitizer 10022 3. SCOPE OF THE REVIEW 9995 6. PROSPECTIVES 10024 4. SINGLET OXYGEN IN SYNTHESIS 9995 1 6.1. State of O2 Synthetic Science 10024 4.1. Background 9995 7. SUMMARY AND OUTLOOK 10025 4.2. Endoperoxides 9996 Author Information 10025 4.3. Carbasugars 9998 Corresponding Author 10025 4.4. Epoxides 9999 Notes 10025 4.5. Tropones and Tropolones 10002 Biographies 10025 4.6. Polycyclic Ethers and Polyols 10004 Acknowledgments 10025 4.7. Sterols 10007 Abbreviations 10025 4.8. Opioids 10008 References 10026 4.9. Ring-Fused Examples 10008 4.10. Phenols 10009 4.11. Self-Sensitized Examples 10010 1. INTRODUCTION 4.12. Indoles 10011 1 4.13.
    [Show full text]
  • Photosensitized Singlet Oxygen and Its Applications
    Coordination Chemistry Reviews 233Á/234 (2002) 351Á/371 www.elsevier.com/locate/ccr Photosensitized singlet oxygen and its applications Maria C. DeRosa, Robert J. Crutchley * Department of Chemistry, Ottawa-Carleton Chemistry Institute, Carleton University, 2240 Herzberg Building, 1125 Colonel By Drive, Ottawa, ON, Canada K1S 5B6 Received 18 September 2001; accepted 15 February 2002 Contents Abstract . ....................................................................... 351 1. Introduction ................................................................... 352 2. Properties of singlet oxygen ........................................................... 352 2.1 Electronic structure of singlet oxygen .................................................. 352 1 2.2 Quenching of O2 ............................................................. 352 2.3 Generation of singlet oxygen . ..................................................... 353 3. Types of photosensitizers ............................................................ 354 3.1 Organic dyes and aromatic hydrocarbons ............................................... 355 3.2 Porphyrins, phthalocyanines, and related tetrapyrroles ........................................ 355 3.3 Transition metal complexes . ..................................................... 357 3.4 Photobleaching of organic and metal complex photosensitizers ................................... 359 3.5 Semiconductors .............................................................. 359 3.6 Immobilized photosensitizers . ....................................................
    [Show full text]
  • Singlet Molecular Oxygen Evolution Upon Simple Acidification Of
    Proc. Natl. Acad. Sci. USA Vol. 91, pp. 12362-12364, December 1994 Chemistry Singlet molecular oxygen evolution upon simple acidification of aqueous hypochlorite: Application to studies on the deleterious health effects of chlorinated drinking water (singlet oxygen/hypochlorite decomposition/chlorinated water supply/DNA mutation) AHSAN ULLAH KHANt AND MICHAEL KASHAt tDepartment of Molecular and Cellular Biology, Harvard University, 16 Divinity Avenue, Cambridge, MA 02138; and tInstitute of Molecular Biophysics and Department of Chemistry, Florida State University, Tallahassee, FL 32306-3015 Contributed by Michael Kasha, July 25, 1994 ABSTRACT A study ofthe pH profile ofthe decomposition method is the direct detection of the lAg 31 emission at of aqueous hypochlorite has revealed the evolution (onset at pH 1268 nm in the near infrared, and this method (10, 11) has 8) ofsingle (1Ag) molecular oxygen (singlet spin state dioxygen) been used in the present research. We used a Ge-photodiode detected spectroscopically (1268 nm), prior to the appearance detector with a dedicated near-IR spectrometer in the 1- to of chlorine (onset at pH 5.5). The possible mechanism of the 1.7-gm region, with electronic and data-processing periph- singlet state dioxygen evolution is presented, and the origin of erals (12). Fig. 1 shows the typical 1268-nm chemilumines- its chloride ion dependence is discussed, especially in reference cence spectra recorded upon the acidification of aqueous to chloride ion dependence of singlet molecular oxygen evolu- hypochlorite with HCI at room temperature. tion in biological systems. Recent epidemiological analyses of The pH profiles of 102 and C12 evolution upon acidification the correlation of human cancer with chlorinated water sup- of aqueous hypochlorite solution at room temperature are plies focus attention on the singlet oxygen mechanisms of DNA shown in Fig.
    [Show full text]
  • Quantification of Singlet Oxygen Generation from Photodynamic Hydrogels
    Quantification of singlet oxygen generation from photodynamic hydrogels Craig, R. A., McCoy, C. P., De Baroid, A. T., Andrews, G. P., Gorman, S. P., & Jones, D. S. (2015). Quantification of singlet oxygen generation from photodynamic hydrogels. Reactive and Functional Polymers, 87, 1-6. https://doi.org/10.1016/j.reactfunctpolym.2014.11.009 Published in: Reactive and Functional Polymers Document Version: Peer reviewed version Queen's University Belfast - Research Portal: Link to publication record in Queen's University Belfast Research Portal Publisher rights Copyright 2014 Elsevier This is the author’s version of a work that was accepted for publication in Reactive and Functional Polymers. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Reactive and Functional Polymers, VOL 87, February 2015 doi:10.1016/j.reactfunctpolym.2014.11.009 General rights Copyright for the publications made accessible via the Queen's University Belfast Research Portal is retained by the author(s) and / or other copyright owners and it is a condition of accessing these publications that users recognise and abide by the legal requirements associated with these rights. Take down policy The Research Portal is Queen's institutional repository that provides access to Queen's research output. Every effort has been made to ensure that content in the Research Portal does not infringe any person's rights, or applicable UK laws.
    [Show full text]
  • Singlet Oxygen Generation Using New Fluorene-Based Photosensitizers Under One- and Two-Photon Excitation
    University of Central Florida STARS Electronic Theses and Dissertations, 2004-2019 2007 Singlet Oxygen Generation Using New Fluorene-based Photosensitizers Under One- And Two-photon Excitation Stephen James Andrasik University of Central Florida Part of the Chemistry Commons Find similar works at: https://stars.library.ucf.edu/etd University of Central Florida Libraries http://library.ucf.edu This Doctoral Dissertation (Open Access) is brought to you for free and open access by STARS. It has been accepted for inclusion in Electronic Theses and Dissertations, 2004-2019 by an authorized administrator of STARS. For more information, please contact [email protected]. STARS Citation Andrasik, Stephen James, "Singlet Oxygen Generation Using New Fluorene-based Photosensitizers Under One- And Two-photon Excitation" (2007). Electronic Theses and Dissertations, 2004-2019. 3065. https://stars.library.ucf.edu/etd/3065 SINGLET OXYGEN GENERATION USING NEW FLUORENE-BASED PHOTOSENSITIZERS UNDER ONE- AND TWO-PHOTON EXCITATION by STEPHEN J. ANDRASIK B.S. University of Central Florida, 2001 M.S. University of Central Florida, 2004 A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Chemistry in the College of Sciences at the University of Central Florida Orlando, Florida Fall Term 2007 Major Professor: Kevin D. Belfield © 2007 Stephen J. Andrasik ii ABSTRACT Molecular oxygen in its lowest electronically excited state plays an important roll in the field of chemistry. This excited state is often referred to as singlet oxygen and can be generated in a photosensitized process under one- or two-photon excitation of a photosensitizer. It is particularly useful in the field of photodynamic cancer therapy (PDT) where singlet oxygen formation can be used to destroy cancerous tumors.
    [Show full text]
  • Lingjie Zhao Singlet Oxygen 1
    Lingjie Zhao Singlet Oxygen 1 Singlet Oxygen By Lingjie Zhao Free Radical and Radiation Biology Graduate Program Department of Radiology B-180 ML The University of Iowa Iowa City, IA 52242-1181 For 77:222, spring, 2001 February 8, 2001 Abbreviations: 1 D2O: deuterium oxide DgO2: singlet oxygen 1 ESR: electron spin resonance SgO2: singlet oxygen 3 3 O2: ground-state dioxygen SgO2: ground-state dioxygen 1O2: singlet oxygen PDT: photodynamic therapy Lingjie Zhao Singlet Oxygen 2 Content Pages 1. Abstract 2 2. Introduction 2 3. Electronic structure and the lifetime of singlet oxygen 3 4. Generation of singlet oxygen and biologic effect in PDT of singlet oxygen 4 5. Detection of singlet oxygen 6 6. Reaction of singlet oxygen 7 7. Quenching of singlet oxygen 8 8. Summary 9 9. References 10 Abstract 1 Singlet oxygen ( O2) is a higher energy state molecular oxygen species. It is one of the most active intermediates involved in chemical and biochemical reactions. To fully appreciate the 1 reactivity of O2, it is necessary to understand its physical and chemical nature. This paper 1 reviews the generation, quenching and detection of O2. Its properties, possible chemical reactions are presented as well as its biological role in Photodynamic therapy (PDT). Lingjie Zhao Singlet Oxygen 3 Introduction 1 Singlet oxygen ( O2) was first observed in 1924 [1] and then defined as a more reactive form of 1 oxygen [2]. The main method of production of O2 is by photosensitization reactions [3]. In 1 1931, Kautsky first proposed that O2 might be a reaction intermediate in dye-sensitized photo- 1 oxygenation [4].
    [Show full text]