DOCSLIB.ORG

Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems CME130 Surveillance Implications of Manufacturing and Subcontractor Management Module 2 Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Content Student Notes 1. Production, Planning and Control (PPC) Systems. This module covers: • An introduction to Production, Planning and Control. • Guidelines on Sales and Operations Planning (S&OP) and Aggregate Planning. • Definition of Demand Management and three types of demand forecast techniques. • How Master Production Scheduling (MPS) is tracked and measured. • An introduction in using the Materials Requirements Planning (MRP) to identify resource risks and mitigate impact on deliverables. 2. The video you are about to see is a narrative by Manufacturing Branch Chief of DCMA Quality Assurance, Mr. Jackson, discussing what Phase 1 of the course means for the students. 1 Defense Acquisition University Student Guide CME130 Surveillance Implications of Manufacturing and Subcontractor Management Module 2 Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Content Student Notes 3. Module 2’s Terminal Learning Objective Module 2 contains 5 lessons: • Lesson 1: Introduction to Production, Planning, and Control (PPC) • Lesson 2: Sales and Operations Planning (S&OP) and Aggregate Planning • Lesson 3: Demand Management • Lesson 4: Master Production Scheduling (MPS) • Lesson 5: Introduction to Materials Requirements Planning (MRP) 4. Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems. 5. Lesson objectives. Upon completion of this lesson, you should be able to: • Contrast the role of PPC systems across strategic, tactical, and operational timeframes. • Describe PPC processes and activities across strategic, tactical, and operational timeframes. • Differentiate between the different levels of a PPC System. • Categorize typical PPC responses to changes in technology, products, processes, or strategy for a given scenario. 2 Defense Acquisition University Student Guide CME130 Surveillance Implications of Manufacturing and Subcontractor Management Module 2 Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Content Student Notes 6. Lesson topics: This lesson will cover the following topics: • The PPC System • PPC System Framework • PPC Classification System • PPC Response to Change 7. Understanding the PPC processes empowers you to evaluate how effectively a company is implementing these practices. Consequently, you will be able to consider the use of PPC processes when determining the likelihood of the company fulfilling its contracts. 8. How does Production, Planning, and Control (PPC) help a manufacturing organization successfully fulfill its contracts? . 9. Topic 1: The PPC System 3 Defense Acquisition University Student Guide CME130 Surveillance Implications of Manufacturing and Subcontractor Management Module 2 Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Content Student Notes 10. Major components of a PPC system framework. The PPC System is made up of the front end, the engine, and the back end. 11. Production Planning and Control (PPC) System. The PPC system is a methodology designed to manage the flow of materials, the utilization of people and equipment (i.e., capacity), and to coordinate suppliers and customers (i.e., supply chain). It also assists with routings, dispatching, and planning. The PPC system provides information to help businesses match supply needs with demand Input. 4 Defense Acquisition University Student Guide CME130 Surveillance Implications of Manufacturing and Subcontractor Management Module 2 Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Content Student Notes 12. The role of PPC in the context of strategic planning: PPC system provides information on: • Capacity needed to meet future market demands; this includes: o Machines, equipment, and facilities o Human-resource size and capabilities o Technology o Geographic locations • Long lead times required to secure capacity, raw materials, and other resources. RELATE the role of PPC in the context of strategic planning to the case study. REFERENCE the Toyota: Demand Chain Management case study introduction (pages 1- 2) and the Overseas Planning Cycle (pages 7- 8). 5 Defense Acquisition University Student Guide CME130 Surveillance Implications of Manufacturing and Subcontractor Management Module 2 Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Content Student Notes 13. The role of PPC in the context of tactical planning: The PPC system matches supply and demand regarding product mix and volume. • Helps in planning appropriate logistical solutions. • Provides customer facing employees with information on correct product quantities and location to meet market needs. • Aids in planning capacity to determine employment levels, budgets, overtime, subcontracting needs, etc. RELATE the role of PPC in the context of tactical planning to the case study. REFERENCE the Toyota: Demand Chain Management case study’s Domestic Distribution section (pages 2-5) and the Overseas Planning Cycle (pages 7-8). 14. The role of PPC in the context of operational planning: PPC system provides a detailed schedule of resources to meet customer requirements. • Schedules time, people, material, equipment and facilities. • Ensures personnel are properly tasked. • Tracks use of resources and results of execution through the use of appropriate metrics. • Supports problem-solving. 6 Defense Acquisition University Student Guide CME130 Surveillance Implications of Manufacturing and Subcontractor Management Module 2 Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Content Student Notes 15. File: CME130_M2_L1_E1_Exercise_FINAL.docx 16. Example for exercise. 17. Instructions 18. Topic 2: PPC System Framework 7 Defense Acquisition University Student Guide CME130 Surveillance Implications of Manufacturing and Subcontractor Management Module 2 Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Content Student Notes 19. The four components of the front end of a PPC framework: Front end pieces are considered customer facing. They examine sales and marketing data, information from manufacturing concerning what available capacity is available to handle more customer orders, and how the manufacturing area is being loaded over the time horizon being considered so that marketing and sales don’t over sell the business’ capabilities to meet customer demand. The decisions made in the front end must align with the business’ overall strategy and goals when taking advantage of new or emerging opportunities. Input is received from: • Resource Planning • Sales and Operations Planning • Demand Management During the Front End S&OP process, an aggregate plan is created to cover the time horizon of interest. This plan presents information in product families – it is very high level. Output from the PPC process: The transition document between the Front End and the Engine is the Master Production Schedule (MPS). This document provides the master schedulers with detailed end item information on the anticipated build schedule based on the aggregate plan created during the S&OP session. • 8 Defense Acquisition University Student Guide CME130 Surveillance Implications of Manufacturing and Subcontractor Management Module 2 Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Content Student Notes 20. The role of Demand Management: Coordinates marketing and sales activities that place demand on manufacturing capacity and processes. Encompasses: • Forecasting customer end-item demand • Coordinating marketing initiatives and activity • Aligning sales activity • Order promising • Accommodating interplant and intercompany demand • Spare-parts requirements RELATE the role of demand management to the case study. REFERENCE the Toyota: Demand Chain Management case study’s Overseas Planning Cycle section (pages 7-10). 21. The role of Resource Planning. Provides a “10,000 foot” view in determining capacity necessary to produce products for the period being reviewed • Strategic: brick and mortar facility requirements, virtual requirements • Tactical: addition and/or disposal of machines and equipment • Operational: labor and machine hours 9 Defense Acquisition University Student Guide CME130 Surveillance Implications of Manufacturing and Subcontractor Management Module 2 Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Lesson 1: Introduction to Production, Planning, and Control (PPC) Systems Content Student Notes 22. The role of Sales and Operations Planning (S&OP):S&OP is a decision-making process where executive level management regularly meets and reviews projections for demand, supply and the resulting financial impact. Decisions are made in alignment with corporate goals
Load more

Recommended publications
  • Production Planning in Different Stages of a Manufacturing Supply Chain Under Multiple Uncertainties Goutham Ramaraj Iowa State University
    Iowa State University Capstones, Theses and Graduate Theses and Dissertations Dissertations 2017 Production planning in different stages of a manufacturing supply chain under multiple uncertainties Goutham Ramaraj Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/etd Part of the Industrial Engineering Commons, and the Operational Research Commons Recommended Citation Ramaraj, Goutham, "Production planning in different stages of a manufacturing supply chain under multiple uncertainties" (2017). Graduate Theses and Dissertations. 16108. https://lib.dr.iastate.edu/etd/16108 This Thesis is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Graduate Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. Production planning in different stages of a manufacturing supply chain under multiple uncertainties by Goutham Ramaraj A thesis submitted to the graduate faculty in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Major: Industrial Engineering Program of Study Committee: Guiping Hu, Major Professor Lizhi Wang Stephen Vardeman The student author and the program of study committee are solely responsible for the content of this thesis. The Graduate College will ensure this thesis is globally accessible and will not permit alterations after a degree is conferred. Iowa State University Ames, Iowa 2017 Copyright © Goutham Ramaraj, 2017. All rights reserved. ii DEDICATION To my family for their unconditional support. iii TABLE OF CONTENTS Page ACKNOWLEDGMENTS ......................................................................................... v ABSTRACT………………………………. .............................................................. vi CHAPTER 1 GENERAL INTRODUCTION ......................................................
    [Show full text]
  • Improving Construction Workflow- the Role of Production Planning and Control
    Improving Construction Workflow- The Role of Production Planning and Control by Farook Ramiz Hamzeh MS (University of California at Berkeley) 2006 M Eng. (American University of Beirut) 2000 B Eng. (American University of Beirut) 1997 A dissertation submitted in partial satisfaction of the requirements for the degree of Doctor of Philosophy in Engineering - Civil and Environmental Engineering in the GRADUATE DIVISION of the UNIVERSITY OF CALIFORNIA, BERKELEY Committee in charge: Professor Iris D. Tommelein (CEE), Chair Professor Glenn Ballard (CEE) Professor Phil Kaminsky (IEOR) Fall 2009 Improving Construction Workflow- The Role of Production Planning and Control Copyright 2009 by Farook Ramiz Hamzeh Abstract Improving Construction Workflow- The Role of Production Planning and Control by Farook Ramiz Hamzeh Doctor of Philosophy in Engineering - Civil and Environmental Engineering University of California, Berkeley Professor Iris D. Tommelein (CEE), Co-Chair, Professor Glenn Ballard (CEE), Co-Chair The Last PlannerTM System (LPS) has been implemented on construction projects to increase work flow reliability, a precondition for project performance against productivity and progress targets. The LPS encompasses four tiers of planning processes: master scheduling, phase scheduling, lookahead planning, and commitment / weekly work planning. This research highlights deficiencies in the current implementation of LPS including poor lookahead planning which results in poor linkage between weekly work plans and the master schedule. This poor linkage
    [Show full text]
  • Planning and Scheduling in Supply Chains: an Overview of Issues in Practice
    PRODUCTION AND OPERATIONS MANAGEMENT POMS Vol. 13, No. 1, Spring 2004, pp. 77–92 issn 1059-1478 ͉ 04 ͉ 1301 ͉ 077$1.25 © 2004 Production and Operations Management Society Planning and Scheduling in Supply Chains: An Overview of Issues in Practice Stephan Kreipl • Michael Pinedo SAP Germany AG & Co.KG, Neurottstrasse 15a, 69190 Walldorf, Germany Stern School of Business, New York University, 40 West Fourth Street, New York, New York 10012 his paper gives an overview of the theory and practice of planning and scheduling in supply chains. TIt first gives an overview of the various planning and scheduling models that have been studied in the literature, including lot sizing models and machine scheduling models. It subsequently categorizes the various industrial sectors in which planning and scheduling in the supply chains are important; these industries include continuous manufacturing as well as discrete manufacturing. We then describe how planning and scheduling models can be used in the design and the development of decision support systems for planning and scheduling in supply chains and discuss in detail the implementation of such a system at the Carlsberg A/S beerbrewer in Denmark. We conclude with a discussion on the current trends in the design and the implementation of planning and scheduling systems in practice. Key words: planning; scheduling; supply chain management; enterprise resource planning (ERP) sys- tems; multi-echelon inventory control Submissions and Acceptance: Received October 2002; revisions received April 2003; accepted July 2003. 1. Introduction taking into account inventory holding costs and trans- This paper focuses on models and solution ap- portation costs.
    [Show full text]
  • Production Planning and Control of Closed-Loop Supply Chains
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Erasmus University Digital Repository Production planning and control of closed-loop supply chains Karl Inderfurth Otto-von-Guericke University Magdeburg, Faculty of Economics and Management, P.O.Box 4120, 39016 Magdeburg, Germany, [email protected] Ruud H. Teunter Erasmus University Rotterdam, Econometric Institute, P.O.Box 1738, 3000 DR Rotterdam, The Netherland, [email protected] Econometric Institute Report EI 2001 - 39 1. Introduction Closed-loop supply chains are characterized by the recovery of returned products. In most of these chains (e.g. glass, metal, paper, computers, copiers), used products (also known as cores) are returned by or collected from customers. But returned products can also come from production facilities within the supply chain (production defectives, by-products. In cases with internal returns, recovery is often referred to as rework. There are two main types of recovery: remanufacturing (product/part recovery) and recycling (material recovery). Energy recovery via incineration could be considered as a third type. Combinations of different recovery types are also possible. It is often not easy to decide what the best product recovery strategy is. Moreover, for a number of reasons, it is difficult to plan and control operations in closed-loop supply chains. Based on a literature review, [Guide 2000] lists the following complicating characteristics for planning and controlling a supply chain with remanufacturing of external returns: 1. The requirement for a reverse logistics network 2. The uncertain timing and quality of cores 3. The disassembly of cores 4.
    [Show full text]
  • The Applicability and Impact of Enterprise Resource Planning (ERP) Systems: Results from a Mixed Method Study on Make-To-Order (MTO) Companies
    The Applicability and Impact of Enterprise Resource Planning (ERP) Systems: Results from a Mixed Method Study on Make-To-Order (MTO) Companies * Bulut Aslan , Mark Stevenson, and Linda C. Hendry Name: Dr Bulut Aslan Institution: Istanbul Bilgi University Address: Department of Industrial Engineering Kazim Karabekir Cad. No: 2 34060, Eyup, Istanbul Turkey E-mail: [email protected] Tel: 00 90 212 3117440 Name: Dr Mark Stevenson Institution: Lancaster University Address: Department of Management Science Lancaster University Management School Lancaster University LA1 4YX U.K. Name: Professor Linda C Hendry Professor of Operations Management Institution: Lancaster University Address: Department of Management Science Lancaster University Management School Lancaster University LA1 4YX U.K. Keywords: Enterprise Resource Planning (ERP) systems; Make-To-Order (MTO); Mixed method study; Survey; Case study. * Corresponding Author: [email protected] The Applicability and Impact of Enterprise Resource Planning (ERP) Systems: Results from a Mixed Method Study on Make-To- Order (MTO) Companies Abstract The effect of a Make-To-Order (MTO) production strategy on the applicability and impact of Enterprise Resource Planning (ERP) systems is investigated through a mixed method approach comprised of an exploratory and explanatory survey followed by three case studies. Data on Make- To-Stock (MTS) companies is also collected as a basis for comparison. The exploratory data demonstrates, for example, that MTO adopters of ERP found the system selection process more difficult than MTS adopters. Meanwhile, a key reason why some MTO companies have not adopted ERP is that it is perceived as unsuitable. The explanatory data is used to test a series of hypotheses on the fit between decision support requirements, ERP functionality, and company performance.
    [Show full text]
  • QAD Dynasys: Demand & Supply Chain Planning (DSCP) Overview
    QAD DYNASYS DSCP DEMAND & SUPPLY CHAIN PLANNING Manufacturers and distributors continually strive to manage supply chain complexity and improve customer satisfaction while reducing inventory levels and costs. Effective supply chain planning solutions provide instant visibility and intuitive decision support, enabling companies to become more agile and exploit supply chain complexity. QAD DynaSys DSCP (demand and supply chain planning) provides a comprehensive end-to-end supply chain planning solution. It helps supply chain planning practitioners achieve the following business outcomes. • Anticipate. DSCP embeds best of breed, intuitive and demand driven material requirements planning business analytics that provide visibility across the (DDMRP). supply chain to ensure accurate decision making. • Simulate. DSCP synchronizes real-time with IoT to • Optimize. The solution uses advanced algorithmic alerts planners to events that may cause exceptions and machine learning forecasting and constraint- to the current plan. Planners are able run end-to- based optimization methods to quickly determine end simulations across the model to determine the best and most feasible plan. the most appropriate course of action using high • Plan. DSCP uses a single data model across performance in-memory computing. all facets of planning. This tightly synchronizes • Collaborate. There is an abundance of real- plans for manufacturing, distribution, inventory time intelligence in the minds of supply chain management and procurement. stakeholders that can add business value to • Respond. It is designed with the latest “response planning. DSCP is designed to harness the planning” techniques including demand sensing collective qualitative intelligence of all stakeholders. 1 of 4 DEMAND & SUPPLY CHAIN PLANNING VALUE AND BENEFITS QAD DynaSys DSCP customers benefit from a more accurate picture of their supply chain future.
    [Show full text]
  • INDUSTRIAL ENGINEERING Learning Outcomes PRODUCTION
    INDUSTRIAL ENGINEERING Learning outcomes 1 Know about production, planning and control 2 Various factors affecting PPC 3 Various types of production systems 4 Various charatestics of the production system 5Know about the process planning 6 Various characteristics of process planning 7 Know about Routing 8Various characteristics of dispatching PRODUCTION PLANNING AND CONTROLPPC 1.Introduction Production Planning is a managerial function which is mainly concerned with the following important issues: What production facilities are required? How these production facilities should be laid down in the space available for production? And How they should be used to produce the desired products at the desired rate of production? Broadly speaking, production planning is concerned with two main aspects: (i) routing or planning work tasks (ii) layout or spatial relationship between the resources. Production planning is dynamic in nature and always remains in fluid state as plans may have to be changed according to the changes in circumstances. Production control is a mechanism to monitor the execution of the plans. It has several important functions: Making sure that production operations are started at planned places and planned times. Observing progress of the operations and recording it properly. Analyzing the recorded data with the plans and measuring the deviations. Taking immediate corrective actions to minimize the negative impact of deviations from the plans. Feeding back the recorded information to the planning section in order to improve future plans. 2.Types of Production Systems A production system can be defined as a transformation system in which a saleable product or service is created by working upon a set of inputs.
    [Show full text]
  • Overview of MRP-I and MRP-II
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 10 | Oct 2018 www.irjet.net p-ISSN: 2395-0072 Overview of MRP-I and MRP-II Charudatta Ahire1, Tanmay Chaudhari2, Prabhu Kanjoor3, Aviraj Chavan4, Shital Patel5 1,2,3,4Students, Department of Mechanical Engineering, Bharati Vidyapeeth College of Engineering, Navi Mumbai, India 5Guide, Professor, Department of Mechanical Engineering, Bharati Vidyapeeth College of Engineering, Navi Mumbai, India ---------------------------------------------------------------------***---------------------------------------------------------------------- Abstract - MRP-I is a technique that gives us the in detail MRP II is used widely by itself, but it's also used as a module requirement of the raw material and components to be used in of more extensive enterprise resource planning the final product. It identifies the right quantity of each raw (ERP) systems. material and component item. In industries, the requirement of material is in large scale and it becomes difficult to keep a 2. HISTORY AND EVOLUTION track of requirement and purchase. By the use of this technique, the production and delivery lead times can be Material requirements planning (MRP) and manufacturing reduced. The outcome of which would be realistic resource planning (MRPII) are predecessors of enterprise commitments to the customer enhancing the customer resource planning (ERP), a business information integration satisfaction. This can bring close the potential customers. system. The development of these manufacturing Moreover, excess inventory wouldn't be ordered. MRP-II is a coordination and integration methods and tools made system which uses one unified database to plan and update all today's ERP systems possible. Both MRP and MRPII are still the activities of all systems.
    [Show full text]
  • Production Planning and Scheduling in Multi-Stage Batch Production Environment
    PRODUCTION PLANNING AND SCHEDULING IN MULTI-STAGE BATCH PRODUCTION ENVIRONMENT A THESIS SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE FELLOW PROGRAMME IN MANAGEMENT INDIAN INSTITUTE OF MANAGEMENT AHMEDABAD By PEEYUSH MEHTA Date: March 15, 2004 Thesis Advisory Committee __________________________[Chair] [PANKAJ CHANDRA] __________________________[Co-Chair] [DEVANATH TIRUPATI] __________________________[Member] [ARABINDA TRIPATHY] 1 Production Planning and Scheduling in Multi-Stage Batch Production Environment By Peeyush Mehta ABSTRACT We address the problem of jointly determining production planning and scheduling decisions in a complex multi-stage, multi-product, multi-machine, and batch-production environment. Large numbers of process and discrete parts manufacturing industries are characterized by increasing product variety, low product volumes, demand variability and reduced strategic planning cycle. Multi-stage batch-processing industries like chemicals, food, glass, pharmaceuticals, tire, etc. are some examples that face this environment. Lack of efficient production planning and scheduling decisions in this environment often results in high inventory costs and low capacity utilization. In this research, we consider the production environment that produces intermediate products, by-products and finished goods at a production stage. By-products are recycled to recover reusable raw materials. Inputs to a production stage are raw materials, intermediate products and reusable raw materials. Complexities in the production process arise due to the desired coordination of various production stages and the recycling process. We consider flexible production resources where equipments are shared amongst products. This often leads to conflict in the capacity requirements at an aggregate level and at the detailed scheduling level. The environment is characterized by dynamic and deterministic demands of finished goods over a finite planning horizon, high set-up times, transfer lot sizes and perishability of products.
    [Show full text]
  • Design of Production Planning and Control System for a Manufacturing Plant: Case Study
    Proceedings of the International Conference on Industrial Engineering and Operations Management Washington DC, USA, September 27-29, 2018 Design of Production Planning and Control System for A Manufacturing Plant: Case Study Ignatio Madanhire, Kumbi Mugwindiri and Nyasha Mushonga University of Zimbabwe, Department of Mechanical Engineering, P.O Box MP167, Mt Pleasant, Harare, Zimbabwe [email protected] Charles Mbohwa University of Johannesburg, Department of Quality Management and Operations Management, P. O. Box 524, Auckland Park 2006, South Africa. [email protected] Abstract The research study was undertaken to design a computerized system to improve production planning and control strategy for the case study company. The developed computer program was formulated to measure the overall equipment effectiveness, identify losses and bottlenecks, as well as help in achieving maximum output with minimum input. A simulation was also done on the pilot section of the production process for the organization. The proposed system of close monitoring of key variables would enable analysis and tracking of manufacturing processes. 1. Introduction The manufacturing activity of a plant is said to be “in control” when the actual performance is within the objectives of the planned performance. But if jobs are not being started and completed on schedule, great concern about the meeting of commitments would start to trouble management as poor production planning persist. Optimum operation of the plant is attained only if the original plan has been carefully prepared to utilize the manufacturing facilities fully and effectively. Challenges in job scheduling such as when an operation is to be performed, or when work is to be completed, may greatly affect the flexibility in production operations, full utilization of men and machines as well as the coordination operational coordination.
    [Show full text]
  • Production Planning with SAP S/4HANA 1010 Pages, 2019, $89.95 ISBN 978-1-4932-1795-3
    First-hand knowledge. Browse the Book This chapter covers the configuration steps for repetitive ma- nufacturing (REM). These steps include creating a repetitive manufacturing profile, setting scheduling parameters for a run schedule quantity (planned orders), and selecting backflush settings for use online or in the background. “Repetitive Manufacturing Configuration” Table of Contents Index The Author Jawad Akhtar Production Planning with SAP S/4HANA 1010 Pages, 2019, $89.95 ISBN 978-1-4932-1795-3 www.sap-press.com/4821 Chapter 5 Repetitive Manufacturing Configuration 5 Configuration steps in repetitive manufacturing include creating a repetitive manufacturing profile, setting scheduling parameters for a run schedule quantity (planned orders), and selecting backflush settings for use online or in the background. The configuration steps in repetitive manufacturing (REM) are relatively straight- forward, without many complexities when compared to discrete manufacturing or process manufacturing types. In fact, the very purpose of REM is to enable lean man- ufacturing in actual business scenarios with correspondingly fewer entries in the SAP S/4HANA system. REM may not be able to manage complex manufacturing pro- cesses, but it can be used to bring about significant process optimization with a decreased data entry workload and improved system performance. This chapter begins by explaining how to set up the REM profile using the REM assis- tant. The assistant guides the user with a step-by-step approach to ensure that the correct settings are made during the REM profile creation stage. The assistant also provides the detailed function of each configuration step and gives recommenda- tions where necessary. You can even choose the desired production method, such as make-to-stock (MTS) or make-to-order (MTO).
    [Show full text]
  • Expert's Guide to Successful MRP Projects
    ® ® Expert’s Guide to Successful MRP Projects September 2012 Ziff Davis Research © All Rights Reserved 2012 ® ® White Paper Executive Summary For most manufacturers, the planning department performs business critical functions. It is responsible for balancing organizational supply with demand, and directing production, distribution, and purchasing activities accordingly. A planning department strives to balance oftentimes competing organizational forces, including customer service, inventory requirements, and operating efficiency. To succeed in their tasks, planners and schedulers rely on materials resource planning (MRP) software to make recommendations and send signals. MRP software typically covers purchase planning, master production scheduling, capacity requirements planning, and distribution planning, among other things. To make meaningful suggestions, MRP requires a steady diet of accurate, relevant, and timely data. If any of these data requirements are missing, MRP is likely to issue recommendations that are harmful – not helpful – to a company. And, the potential harm can be significant, including: bloated inventories, missed order promise dates, and production schedules that are unresponsive to actual demand priorities. In this Expert’s Guide to Successful MRP Projects, we break down two critical MRP project success factors: 1) Tips to select the right MRP software, and 2) Best-practices to extract meaningful value from MRP solutions More specifically, this report covers the following: • An Historical Definition of MRP • MRP
    [Show full text]