Fire Alarm Control Systems Simple

Fire Alarm Control Systems Simple. Smart. Reliable. PROVEN PERFORMANCE

Honeywell Silent Knight Fire Alarm Systems

Founded in 1961, Honeywell Silent Knight designs and manufactures commercial fi re alarm and life safety systems. It leads the fi re alarm industry with a broad portfolio of products with advanced features and capabilities. Perfect for both simple and complex installs, you'll fi nd Silent Knight at security equipment distributors throughout the United States. Silent Knight’s headquarters and manufacturing operations are based in Northford, Connecticut, USA.

The Honeywell Silent Knight 6000 Series

When Silent Knight's on guard, you won't be caught off-guard.

Silent Knight fi re systems offer: • Over 1,100 addressable points with versatile SLC functionality • Compatible with System Sensor® and Hochiki® devices • Combination Fire Alarm Control Panel and Emergency Voice System for mass notifi cation • SWIFT® Class A mesh wireless detection • Ability to connect addressable panels for single point viewing

• Thorough classroom/on-line training, technical services, Jumpstart™ autoprogramming, SKST confi guration and HFSS tools

Protecting what matters most 2 Addressable Fire Alarm Control Panels (FACPs) Silent Knight 6000 Series Features

6700 6808 6820 and 6820EVS

Up to 100 points for small sized installations

Up to 198 points for The Honeywell Silent Knight 6000 Series medium sized installations

Up to 1,110 points for large installations or complex projects For more information on the 6820EVS see Pages 8-9.

Shared Features and Specifications • Field upgradeable firmware • Supports Class B and Class A configurations • Detector status to perform a NFPA 72-compliant • Connect up to 17 panels with convenient single • Distributed, intelligent power sensitivity check panel visibility of all connected panels • Three Form C relays: one trouble and two • Built-in synchronization for System Sensor, Wheelock®, • Built-in IP/POTs and optional cellular communicators programmable. Rated at 2.5 amps at 24 VDC. Gentex®, and AMSECO® • SWIFT wireless detection • Automatic drift compensation • Built-in digital communicator (DACT)

ADDITIONAL FEATURES AND SPECIFICATIONS 6820 and 6820EVS 6808 6700 MAX ADDRESSABLE POINTS - SK (SYSTEM SENSOR) DEVICES 1,110 198 100 MAX ADDRESSABLE POINTS - SD (HOCHIKI) DEVICES 635 127 50 NOTIFICATION APPLIANCE CIRCUITS 6 (expandable to 56) 4 (expandable to 36) 2 (expandable to 34) POWER SUPPLY 6A 6A 2.5A SMOKE VERIFICATION ü ü ü ANSI 3.41 (TEMPORAL) CADENCE ü ü ü UP/DOWNLOADABLE (IP ONLY) ü ü ü BUILT-IN RELAY OUTPUTS 3 3 3 MAX REMOTE ANNUNCIATORS 16 12 8 BUILT-IN 80-CHARACTER LCD ü ü ü ALARM REPORTING BY POINT OR ZONE ü ü RS-485 ACCESSORY COMM BUS ü ü ü BUILT-IN SERIAL INTERFACE TO PROGRAM VIA PC ü ü ü PROGRAMMABLE FOR DAYLIGHT SAVINGS TIME ü ü ü NON-VOLATILE, 1000-EVENT HISTORY BUFFER ü ü ü CUSTOMIZABLE TEXT LABELS FOR DEVICE AND MODULES ü ü ü WATER DELUGE RELEASING SERVICE ü ü ü

3 6820 System Example

Example of a complete FACP system using a 6820 FACP. Includes detectors, AV notiﬁ cation appliances, Flexputs, SLC expanders, SWIFT wireless and other devices.

Fire Department Central Station

SK-BEAM SK-DUCT 6815 SLC

6820 FACP with IP/POTs HFSS

5895XL Power Supply

Cellular Connection CELL-CAB-SK SWIFT 6815 SLC SBUS W-USB SLC 6860 6855 6815 SLC 6815 SLC WSK-WGI

OUTPUT WSK-PHOTO PC2WL HRL PC2RL Ceiling-Mount Wall-Mount Ceiling-Mount Flexput* Horn Strobe Horn Horn Strobe

SBUS WSK-PHOTO-T AV NOTIFICATION SK-RELAY Relay Module INPUT 5496 WSK-HEAT 6 Amp Power 2W-B CO1224T SK-ZONE Module Photoelectric CO Zone Interface Module CONVENTIONAL DEVICES WSK-HEAT-ROR

5460R SK-CONTROL-6 Remote Supervised Annunciator WSK-MONITOR Control Module SK-FIRE-CO SK-PHOTO-W SK-HEAT-W SK-ACCLIMATE B200S-LF Photoelectric Fixed Thermal Multi-Criteria Multi-Criteria Photoelectric Fire/CO with Thermal WSK-RELAY DETECTORS SK-MON-10 5880 Low Frequency Addressable Sounder Base LED Driver Multi-Module and Input Module

SK-RELAYMON-2 Two In/Two Out Module 5883 Relay Interface SK-MINIMON SK-MONITOR SK-ISO SK-PULL-DA SK-PULL-SA Module Monitor Module Input Module Fault Isolator Module

DEVICES

* Flexput Circuits are input or output circuits that can be programmed for NACs, conventional input circuits, or auxiliary power - constant power, door power, or resettable smoke power. Versatility without the cost of additional modules. Also useful for retroﬁ tting existing systems.

4 ADDRESSABLE FIRE ALARM DEVICES

Detectors, Modules, Pull Stations, Annunciators, Power Supplies and More

Silent Knight's addressable detectors, modules, pull stations, annunciators and power supplies are specifi cally engineered to ensure your installs and maintenance are simple and effi cient.

Silent Knight addressable FACPs support both System Sensor (SK) and Hochiki (SD) devices although SK and SD devices cannot be mixed together within the same system.

Silent Knight routinely adds new devices to its offering. For the most up-to-date product listing, visit www.silentknight.com.

SK Devices SD Devices SWIFT Wireless Detection B200S Intelligent Sounder Base SD500-AIM Addressable Input Module Uses SK Protocol B200S-LF Intelligent Low Frequency Sounder Base SD500-ANM Addressable Notifi cation Module WSK-HEAT Fixed Heat Detector B200SR Sounder Base SD500-ARM Addressable Relay Module WSK-HEAT-ROR Rate-of-Rise Heat Detector B200SR-LF Low Frequency Sounder Base SD500-LIM Loop Isolation Module WSK-MONITOR Monitor Module B210LP Intelligent 6-Inch Detector Base SD500-MIM Mini-Input Module WSK-PHOTO Photo Detector B224BI Isolator Base SD500-PS/PSDA Single or Dual Action Addressable Pull Station WSK-PHOTO-T Photo/Thermal Detector B224RB Relay Base SD500-SDM Smoke Detector Module WSK-RELAY Relay Module B501 Intelligent 4-Inch Detector Base SD505-4AB/SD505-6AB Four/Six-Inch Detector Base WSK-WGI Gateway ISO-6 Six Fault Isolator Module SD505-6IB 6-Inch Isolator Base SWIFT Tools USB Transceiver SK-ACCLIMATE Multi-Criteria Photoelectric Detector With SD505-6RB 6-InchAddressable Relay Base W-USB Thermal Sensing SD505-6SB 6-Inch Addressable Sounder Base SK-BEAM Single-Ended Reﬂ ected Beam Detector SD505-DTS-K Addressable Duct Detector Test Switch Other Devices SK-BEAM-T Single-Ended Reﬂ ected Beam Detector SD505-DUCT Addressable Duct Housing 5496 Addressable Power Supply With Integrated Sensitivity Test SD505-DUCTR Addressable Duct Detector with Built-In Relay 5815XL Signaling Line Circuit for SD Devices SK-CONTROL Supervised Control Module SD505-HEAT Addressable Heat Detector 5824 Serial/Parallel Module SK-CONTROL-6 Six Circuit Supervised Control Module SD505-PHOTO Addressable Photoelectric Detector 5860/5860R Remote LCD Annunciator SK-DUCT Photoelectric Duct Detector 5865-3/5865-4 Remote LED Annunciator SK-FIRE-CO Combination Fire And CO Detector 5880 LED Input/Output Module SK-HEAT 135°F Fixed Temperature Heat Detector Audible/Visible Devices 5883 Relay Interface Board SK-HEAT-HT 190°F Fixed High Temperature Heat Detector Most of our AV devices are available in red or white. 5895XL Intelligent Power Module SK-HEAT-HT-W 190°F Fixed High Temperature Heat Part numbers with an "R" indicate red and "W" white. 6815 Signaling Line Circuit for SK Devices Detector (White) For more AV options visit www.silentknight.com. SK-FML Fiber Optic Card (Multi-Mode) SK-HEAT-ROR 135°F Fixed Temperature Rate of Rise Heat Detector CHSRL/CHSWL Wall chime/strobe Transmitter/Receiver SK-HEAT-ROR-W 135°F Fixed Temperature Rate of Rise CHSCRL/CHSCWL Ceiling chime/strobe SK-FSL Fiber Optic Card (Single-Mode) Heat Detector (White) CHRL/CHWL Wall chime Transmitter/Receiver SK-HEAT-W 135°F Fixed Temperature Heat Detector (White) HRL/HWL Wall horn SK-NIC Network Interface Card SK-ISO Fault Isolator Module P2RL/P2WL Wall horn/strobe SK-NIC-KIT Accessory Cabinet for SK-NIC SK-MINIMON Mini Monitor Module P4RL/P4WL Wall horn/strobe (4-wire) SK-SCK Seismic Compliance Kit SK-MON-10 Ten Input Monitor Module PC2RL/PC2WL Ceiling horn/strobe SK-MONITOR Monitor Module PC4RL/PC4WL Ceiling horn/strobe (4-wire) SK-MONITOR-2 Dual Monitor Module SRL/SWL Wall strobe SK-PHOTO Photoelectric Detector SCRL/SCWL Ceiling strobe SK-PHOTOR Remote Test Capable Detector for DNR/DNW SPSCRL/SPSCWL Ceiling speaker/strobe SK-PHOTO-R-W Remote Test Capable Detector for DNR/DNW SPSRL/SPSWL Wall speaker/strobe (White) SPRL/SPWL Wall speaker SK-PHOTO-T Photoelectric Thermal Detector SPCRL/SPCWL Ceiling speaker SK-PHOTO-T-W Photoelectric Thermal Detector (White) SK-PHOTO-W Photoelectric Detector (White) SK-PULL-DA Addressable Dual Action Pull Station SK-PULL-SA Addressable Single Action Pull Station SK-RELAY Relay Control Module SK-RELAY-6 Six Relay Control Module SK-RELAYMON-2 Intelligent Dual Monitor/Relay Module SK-ZONE Zone Interface Module SK-ZONE-6 Six Zone Interface Module 5 Remote Annunciators and SWIFT Wireless Devices

Remote Annunciators

Silent Knight remote annunciators are an indispensable part of any fi re system. They can be used to operate and program the FACP from additional locations within the system. In addition to status messages displayed on the LCD, there are LEDs for alarm, supervisory, trouble, silence, and AC power status. On-board piezo sounders audibly indicate alarms, troubles and supervisory conditions.

Remote annunciators communicate with the FACP 6860 through an RS-485 connection with wiring up to 6,000 • Large 160-character LCD display (4 lines , 40 characters per line) feet from the panel, and they can be ﬂ ush or surface • Four programmable function keys free-up time spent at mounted. When surface mounted, trim rings are available the panel executing routine tasks for a seemless look between the wall and annunciator. • Lock and key for secure access • Surface mount trim ring (RA-100TR)

SWIFT Wireless Detection SWIFT® (Smart Wireless Integrated Fire Technology) devices seamlessly integrate with existing or new wired installations, providing a unique level of reliability through smart, true mesh technology. With redundant paths of communication, if a wireless path is disrupted, the system automatically heals itself, providing Class A system reliability.

SWIFT is ideal for hard-to-wire locations, buildings where new wiring is not 6855 • 80-character LCD display (4 lines, 20 characters per line) allowed, or for retrofi t and temporary applications. Compatible with 6000 • Lock and key for secure access Series panels, using SK protocol, with the WSK-WGI gateway communicating • Surface mount trim ring (RA-100TR) via the SLC. SWIFT Wireless Detection Uses SK Protocol WSK-HEAT Fixed Heat Detector WSK-HEAT-ROR Rate-of-Rise Heat Detector WSK-MONITOR Monitor Module WSK-PHOTO Photo Smoke Detector WSK-PHOTO-T Photo/Thermal Detector WSK-RELAY Relay Module 5860R WSK-WGI Gateway • 80-character LCD display (4 lines , 20 characters W-USB SWIFT Tools USB Transceiver per line) • Access via fi refi ghter’s key or access code. Special installation code required for programming functions. • Surface mount trim ring (5860TR)

6 Application Examples

From connecting panels, to utilizing emergency communication systems and SWIFT devices, here are a few examples of how Silent Knight products can be used for specific applications.

Integrated FACP and Emergency Voice Systems

Housed in one panel with associated peripherals; meets UL 2572 requirements for mass notification.

Consider this set-up: 6820EVS, EVS-LOC, EVS-125W, SPSWL, SK-PULL-DA, SK-FIRE-CO, SK-DUCT, 5860, and CELL-CAB-SK

Integrating Wireless Solutions

Integrate SWIFT wireless devices where wiring is discouraged or impractical — places of worship, historical structures, or complex pre-wired sites. SWIFT is also ideal for easy-install fire protection in unfinished structures.

Note that SWIFT operating temperatures are 32ºF-122ºF.

Consider this set-up: 6808, WSK-WGI, WSK-PHOTO, WSK-PHOTO-T, WSK-HEAT, WSK-HEAT-ROR, and WSK-MONITOR

Fire Systems for Connected Buildings

Improve access to critical indicators while lowering monitoring fees by connecting the fire system using fiber optic or copper wire with one panel handling communications for all connected panels. Central Station communications can be initiated using Contact ID with Alarmnet®, or SIA protocols.

Consider this set-up: 6820, 6808, 6815s, SK-NIC, SK-FML, SK-FIRE-CO, SK-ACCLIMATE, SK-DUCT, SK-PULL-DA, P2WL, SRL, 6860, and CELL-CAB-SK

Conventional Fire Systems Designed for small or open buildings where locating precise fire spots is not paramount, but the budget is. Also useful for monitoring sprinkler systems.

Consider this set-up: SK-5208, PS-DA, and an assortment of conventional devices

7 Emergency Voice Systems

Silent Knight's Emergency Voice System (EVS) product line is a fi re and emergency mass notifi cation system conveniently integrated and housed in a single panel, and meets the requirements for mass notifi cation as described in UL 2572. This combination is useful for managing fi re and non-fi re events where life safety and property protection depends upon clear and timely communications.

Silent Knight's Emergency Voice System (EVS) includes the 6820EVS panel, optional amplifi ers, an operator's console, fi re fi ghter telephone system and a wide variety of alarms and audio visual devices. The panel has an on-board supervised microphone, and all call and non-active call buttons that can quickly select all active or all non-active output groups. The system also lets you select an EVS message as a priority over fi re.

The FACP has 16 built-in speaker group switches - expandable to 32, and 15 recordable one minute messages that can be mapped to eight different EVS buttons. It has a built-in annunciator with a 160-character (4 line, 40 character) LCD display, and four programmable buttons that can be programmed as needed to minimize time spent executing complex or routine tasks.

This system will help keep those impacted informed of both fi re and non-fi re emergencies, with real time information and guidance.

Emergency Voice System Application

SPCWL SPCRL SWL SPCW8 Audible Visible Notiﬁ cation

E V S - 1 2 5 W A m p l i ﬁ e r

SK-PHOTO-W SK-FIRE-CO SK-HEAT-W

6820EVS EVS-LOC Remote Fire Alarm Control Command Unit Panel and Emergency SK-PULL-DA P2RL SPSWL HRL Voice System Detection and Notiﬁ cation on an SLC Loop

8 EVS-LOC • Combination supervised remote microphone and annunciator compatible with the 6820EVS • Makes access to the communication system easier when immediate and timely communications are essential • Up to four EVS-LOCs can be added to a compatible emergency voice system

SKE-450 • Voice evacuation system that delivers clear voice messages • 50 watts, built-in digital message repeater, power supply, and two alarm inputs • Message repeater, power supply, and two alarm inputs • Field programmable messages and fully supervised speaker circuits

SK-FFT • Fire Fighters Telephone Communication System • Control and annunciation of up to 48 remote fi re fi ghter telephone jacks with intuitive LEDs that help you locate trouble quickly • A maximum of 10 fi re fi ghter remote handsets can be used at one time

Three options for audio ampliﬁ cation: EVS-50W 50 watt amplifi er EVS-100W 50/100 watt amplifi er with built-in backup 6820EVS EVS-125W 125 watt amplifi er Fire alarm control panel with integrated emergency voice communication system • Large 160 character (4 lines x 40 characters) display • Four programmable buttons save time at the panel executing routine and complex tasks • Up to 1,110 points (SK Protocol); 635 (SD Protocol)

• Integrated IP/POTs and optional cellular side-cars Additional Accessories • On-board microphone, 16 speaker groups EVS-INT50W 50 Watt internal amplifi er (expandable to 32), and up to 15 recordable messages EVS-CE4 Circuit Audio Expander EVS-SW24 24 Switch Expander • Supports up to four EVS-50W, EVS-100W or EVS-125W EVS-VCM Voice Control Module amplifi ers; maximum of 500 watts. Each amplifi er has four built-in speaker circuits expandable to eight. For more information see Pages 3 and 8 9 Power Supplies

POWER SUPPLY FEATURES FEATURES 5499 and 5495 Distibuted 5499 5495 Power Supplies Power Output 9A/24VDC 6A/24VDC Number of Outputs 4 + Aux 4 + Aux The 5499 (9 Amps) and 5495 (6 Amps) notifi cation power Maximum Output per CKT 3A 3A Auxillary Power Output 3A 3A expanders provide AC power connection, a battery charging Ground Fault Detection ü ü circuit and backup battery support for compatible fi re alarm Trouble Relay ü ü control panels. Their switch mode power supply design is Standalone Operation ü ü up to 50% more effi cient than linear mode power supplies. ANSI 3.41 (Tempoal) Cadence ü ü They include built-in synchronization for appliances Activation-->>Reverse Polarity/Contect ü ü Class A or B Operation ü ü from System Sensor, Gentex, Wheelock and others.

Fire Communicators

CELL-MOD and CELL-CAB-SK Designed to integrate directly with Silent Knight 6000 Series panels, these HSPA+ (4G) communicators do not require special programming or a dialer capture module and utilize the battery backup provided by the fire alarm control panel. They are useful for dual path reporting when combined with integrated panel IP communications and are remote mountable up to 6000 feet from the CELL- MOD CELL-CAB-SK FACP so they can be positioned to receive the best cellular signal. Cellular Side-Car Cellular Side-Car (Plastic Housing) (Metal Housing with Lock/Key)

IPGSM-4G Communicator 5104 Digital Fire Communicator SK-IP-2 • Fire alarm communicator that offers Contact • A six-zone stand-alone or adjunct communicator • Remote reporting via the Internet. Requires a ID reporting (Universal Digital Alarm Communicator VisorAlarm® receiver at the central station. • Provides single or dual path communications Transmitter) reporting through POTs lines • Metal enclosure mounts next to the FACP through three selectable reporting paths - • Can be used as a stand-alone sprinkler • Two supervised inputs and two cellular, IP or IP primary/cellular backup supervisory control panel for supervised additional outputs • Connects directly to the communication waterflow bell output ports of the FACP digital alarm communicator • Six fully supervised inputs including one Class A transmitter (DACT) and five Class B • Communications are sent to the AlarmNet Network Control Center 10 Conventional Fire Alarm Control Panels

Silent Knight conventional fi re alarm CONVENTIONAL FEATURES control panels include basic 2 to SK-5208 SK-4 SK-2 POWER SUPPLY FEATURES FEATURES 10 zone panels, with optional zone Number of Class B Zones 10 (exp. to 30) 4 2 5499 5495 Notifi cation Appliance Circuits 4 2 1 expansion, remote annunciators, Power Output 9A/24VDC 6A/24VDC Power Supply (24VDC) 6.0A 2.5A or 5.0A 2.5 Number of Outputs 4 + Aux 4 + Aux pull stations and related accessories. Alarm Verifi cation ü ü ü Maximum Output per CKT 3A 3A Built-in synchronization for System ANSI 3.41 (Temporal) Cadence ü ü ü Auxillary Power Output 3A 3A Sensor, Wheelock, Gentex, and Up/Downloadable ü Ground Fault Detection ü ü Communicator ü Optional Optional AMSECO. All zones are compatible with Trouble Relay ü ü Built-In Relay Circuits 4 3 2 listed 2- or 4-wire smoke detectors. Standalone Operation ü ü Remote Annunciator LCD LED ANSI 3.41 (Tempoal) Cadence ü ü Auxiliary Power 1.0A 0.5A 0.5A Activation-->>Reverse Polarity/Contect ü ü Class A or B Operation ü ü

Fire Communicators

CELL-CAB-SK SK-5208 SK-4 SK-2 Cellular Side-Car • Ten zone panel (expandable to 30), LCD • Four zone panel • Two zone panel (Metal Housing with Lock/Key) display and programmable touchpad • Form C alarm, supervisory and • Form C alarm and trouble relays • Supervised zone expanders and I/O trouble relays • Silent or audible walk test operation modules can be mounted remotely from • Optional module converts all 4 the main control • Disable switches provided per zone IDCs and 2 NACs to Class A • Silent or audible walk test operation • Disable switches provided per zone

Accessories SK-4XLM LED Interface Module Conventional Pull Stations SK-5208 Accessories SK-XRM24 110 Volt Transformer Can be reset with Silent Knight 3-6A enclosure keys. Optional surface SK-5217 10-Zone Expander SK-RZA4 Remote Annunciator mount back boxes. SK-5235 Remote LCD Annunciator SK-4XZM Zone Relay Module PS-SATK Single Action Metal SK-5280 Status Display Module TR-1-R Semiflush Mount Trim Ring (Weatherproof) 5660 Silent Knight Software Suite Dual Action Metal PS-DATK PS-DATK (SKSS) (available on website only) SK-DP2 Accessories (Weatherproof) 5824 Serial/Parallel Module SK-DP2/4 Dress Panel PS-SA Single Action Lexan SK-2RB Repair Board PS-DA Dual Action Lexan SK-4 Accessories SK-4XTM Transmitter Module PS-DASP Dual Action Spanish PS-DA SK-DP2/4 Dress Panel RBB Remote Battery Box Language Lexan SK-4RB Repair Board Accessory Cabinet PS-DAH Dual Action Hex Key Lexan SK-CAC4 Class A Converter TR-1-R Semiflush Mount Trim Ring PS-DALOB Dual Action Listed SK-4XTM Transmitter Module Outdoor w/Back Box Lexan 11 For more information, visit: www.silentknight.com

Contact our sales team: www.silentknight.com/SalesMap