Nokia 6233 User's Guide

Nokia 6233 User's Guide DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-145 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. 0434

Copyright © 2006 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia, Visual Radio, Nokia Connecting People, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

Bluetooth is a registered trademark of Bluetooth SIG, Inc. Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See .

Copyright © 2006 Nokia. All rights reserved. 1 Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

For your safety ...... 7 Answer or reject a voice call.... 24 Call waiting ...... 24 General information...... 10 Options during a voice call...... 24 Access codes ...... 10 Make a video call ...... 25 Security code...... 10 Answer or reject a video call.... 26 PIN codes...... 10 Options during a video call...... 26 PUK codes...... 10 Barring password ...... 10 4.Write text ...... 27 Configuration settings Settings ...... 27 service...... 11 Predictive text input...... 27 Download content and Traditional text input ...... 28 applications...... 11 5.Navigate the menus ...... 29 Nokia support and contact information...... 11 6.Messaging ...... 30 Text messages (SMS)...... 30 1.Get started...... 13 Write and send SMS messages .... 30 Install the SIM card and the Read and reply to an SMS battery...... 13 message ...... 31 Install a memory card...... 14 SIM messages...... 31 Charge the battery ...... 15 Multimedia messages...... 31 Switch the phone on and off ... 16 Write and send a multimedia Set the time, time zone, message ...... 32 and date...... 16 Send a message...... 33 Plug and play service ...... 16 Cancel message sending...... 33 Normal operating position...... 16 Read and reply to a multimedia 2.Your phone ...... 18 message ...... 34 Keys and parts ...... 18 Memory full...... 34 Standby mode...... 19 Folders ...... 35 Active standby ...... 19 Flash messages...... 35 Standby mode shortcuts...... 20 Write a flash message ...... 35 Power saver...... 21 Receive a flash message ...... 35 Indicators...... 21 Audio messages ...... 35 Keypad lock (keyguard)...... 22 Create an audio message...... 36 Receive an audio message...... 36 3.Call functions ...... 23 E-mail application...... 36 Make a voice call...... 23 Settings Wizard...... 37 Speed dialing...... 23 Write and send an e-mail...... 37 Enhanced voice dialing...... 23

Download e-mail...... 38 Sleep mode...... 50 Read and reply to e-mail...... 38 Font size...... 50 E-mail folders ...... 38 Time and date...... 50 Spam filter...... 39 My shortcuts...... 51 Voice messages...... 39 Left selection key...... 51 Info messages ...... 39 Right selection key...... 51 Service commands...... 39 Navigation key ...... 51 Delete messages...... 39 Enable active standby ...... 51 Message settings ...... 40 Voice commands...... 52 General ...... 40 Connectivity...... 52 Text message and SMS e-mail..... 40 Bluetooth wireless technology.... 52 Multimedia message ...... 41 Set up a Bluetooth connection ... 53 E-mail ...... 42 Bluetooth wireless connection.... 53 7.Contacts...... 43 Bluetooth settings...... 53 Infrared...... 54 Search for a contact ...... 43 Packet data ...... 54 Save names and phone Packet data connection...... 55 numbers...... 43 Packet data settings...... 55 Save numbers and text Data transfer...... 56 items...... 43 Data transfer with a compatible Copy contacts ...... 44 device...... 56 Edit contact details ...... 44 Data transfer without SIM card.. 57 Delete contacts...... 44 Synchronize from a compatible Business cards...... 44 PC...... 57 Settings...... 45 Synchronize from a server ...... 57 Groups...... 45 USB data cable...... 57 Speed dials...... 45 Call...... 58 Service and my numbers...... 45 Phone ...... 58 8.Log ...... 47 Enhancements...... 59 9.Settings...... 48 Configuration...... 60 Security ...... 60 Profiles...... 48 Digital rights management...... 61 Flight mode ...... 48 Restore factory settings...... 62 Themes...... 48 Tones...... 49 10.Operator menu...... 63 Display...... 49 11.Gallery...... 64 Standby mode...... 49 Format memory card ...... 64 Standby settings...... 49 Screen saver...... 50 12.Media ...... 65 Power saver...... 50 Camera ...... 65

Take a photo...... 65 Make a calendar note...... 79 Record a video clip ...... 66 Note alarm...... 79 Camera settings...... 66 To-do list...... 79 Media player ...... 66 Notes...... 80 Progressive download...... 66 Calculator ...... 80 Set up the phone for a streaming Convert currency...... 80 service ...... 66 Countdown timer ...... 81 Music player...... 67 Stopwatch ...... 81 Play the music tracks transferred 15.Applications ...... 82 to the phone...... 67 Games...... 82 Music player settings...... 68 Launch a game ...... 82 Radio ...... 68 Game downloads...... 82 Save radio channels ...... 69 Game settings...... 82 Listen to the radio ...... 69 Collection...... 82 Voice recorder...... 70 Launch an application ...... 82 Record sound...... 70 Application options ...... 82 List of recordings...... 70 Download an application...... 83 Define a storage folder...... 70 Presenter...... 83 Equalizer...... 71 16.Web ...... 85 13.Push to talk ...... 72 Basic steps to access and use Connect to the PTT service...... 72 services...... 85 Make and receive a PTT call...... 73 Set up browsing...... 85 Make a channel or a group call... 73 Connect to a service...... 85 Make a one-to-one call ...... 73 Browse pages...... 86 Make a PTT call to multiple Browse with phone keys...... 86 recipients...... 74 Options while browsing ...... 87 Receive a PTT call...... 74 Direct calling...... 87 Callback requests...... 74 Bookmarks...... 87 Send a callback request ...... 74 Receive a bookmark ...... 87 Respond to a callback request ..... 75 Appearance settings...... 88 Add a one-to-one contact ...... 75 Security settings...... 88 PTT channels...... 75 Cookies...... 88 Add a channel ...... 76 Scripts over secure connection.... 89 Receive an invitation ...... 76 Download settings ...... 89 PTT settings...... 76 Service inbox ...... 89 14.Organizer ...... 78 Service inbox settings...... 89 Alarm clock...... 78 Cache memory...... 90 Stop the alarm...... 78 Browser security ...... 90 Calendar ...... 78 Security module ...... 90

Certificates...... 90 Digital signature ...... 91 17.SIM services ...... 93 18.PC connectivity...... 94 Nokia PC Suite...... 94 EGPRS, HSCSD, CSD, and WCDMA...... 94 Data communication applications ...... 94 19.Battery information ...... 95 Charging and discharging ...... 95 Nokia battery authentication guidelines...... 96 20.Genuine Enhancements .. 98 Battery ...... 98 Care and maintenance...... 99 Additional safety information...... 100 Index...... 104

Read these simple guidelines. Not SWITCH OFF WHEN following them may be dangerous or REFUELING illegal. Read the complete user guide Do not use the phone at a for further information. refueling point. Do not use near fuel or chemicals. SWITCH ON SAFELY Do not switch the phone SWITCH OFF NEAR on when wireless phone BLASTING Follow any restrictions. Do use is prohibited or when it not use the phone where may cause interference or blasting is in progress. danger. USE SENSIBLY ROAD SAFETY COMES Use only in the normal FIRST Obey all local laws. Always position as explained in keep your hands free to the product operate the vehicle while documentation. Do not driving. Your first touch the antenna consideration while unnecessarily. driving should be road QUALIFIED SERVICE safety. Only qualified personnel may install or repair this INTERFERENCE All wireless phones may be product. susceptible to ENHANCEMENTS AND interference, which could BATTERIES affect performance. Use only approved enhancements and SWITCH OFF IN HOSPITALS batteries. Do not connect Follow any restrictions. incompatible products. Switch the phone off near medical equipment. WATER-RESISTANCE Your phone is not water- SWITCH OFF IN AIRCRAFT resistant. Keep it dry. Follow any restrictions. Wireless devices can cause BACK-UP COPIES interference in aircraft. Remember to make backup copies or keep a written record of all important information stored in your phone.

CONNECTING TO OTHER Warning: To use any features DEVICES in this device, other than the When connecting to any alarm clock, the device must other device, read its user be switched on. Do not guide for detailed safety switch the device on when instructions. Do not wireless device use may connect incompatible cause interference or danger. products. EMERGENCY CALLS ■ Network services Ensure the phone is switched on and in service. To use the phone you must have Press the end key as many service from a wireless service provider. times as needed to clear the Many of the features in this device display and return to the depend on features in the wireless start screen. Enter the network to function. These network emergency number, then services may not be available on all press the call key. Give your networks or you may have to make location. Do not end the call specific arrangements with your until given permission to do service provider before you can utilize so. network services. Your service provider may need to give you additional ■ instructions for their use and explain About your device what charges will apply. Some The wireless device described in this networks may have limitations that guide is approved for use on the EGSM affect how you can use network 900; GSM 1800 and1900; and services. For instance, some networks WCDMA2100 networks. Contact your may not support all language- service provider for more information dependent characters and services. about networks. Your service provider may have When you use the features in this requested that certain features be device, obey all laws and respect disabled or not activated in your privacy and legitimate rights of others. device. If so, they will not appear on When you take and use images or your device menu. Your device may video clips, obey all laws and respect also have been specially configured. local customs as well as privacy and This configuration may include legitimate rights of others. changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP

8 Copyright © 2006 Nokia. All rights reserved. For your safety protocols. Some features of this device, ■ Enhancements such as multimedia messaging (MMS), browsing, e-mail application, instant A few practical rules about accessories and enhancements. messaging, presence-enhanced contacts, remote synchronization, and • Keep all accessories and content downloading using the enhancements out of the reach of browser or MMS, require network small children. support for these technologies. • When you disconnect the power cord of any accessory or ■ Shared memory enhancement, grasp and pull the plug, not the cord. The following features in this device • Check regularly that enhancements may share memory: gallery, contacts, installed in a vehicle are mounted text messages, multimedia messages, and are operating properly. instant messages, e-mail, calendar, to- • Installation of any complex car do notes, JavaTM games and applications, and note application. Use enhancements must be made by qualified personnel only. of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

■ Access codes The module PIN is required to access the information in the Security code security module. See ”Security module” p. 90. The module PIN is The security code (5 to 10 digits) supplied with the SIM card if the helps to protect your phone SIM card has a security module in against unauthorized use. The it. preset code is 12345. To change the code, and to set the phone to The signing PIN is required for the request the code, see ”Security” digital signature. See ”Digital p. 60. signature” p. 91. The signing PIN is supplied with the SIM card if the If you enter an incorrect security SIM card has a security module in code five times in succession, the it. phone ignores further entries of the code. Wait for 5 minutes, and enter the code again. PUK codes The personal unblocking key (PUK) PIN codes code and the universal personal unblocking key (UPUK) code (8 The personal identification digits) is required to change a number (PIN) code and the blocked PIN code and UPIN code, universal personal identification respectively. If the codes are not number (UPIN) code (4 to 8 digits) supplied with the SIM card, help to protect your SIM card contact your service provider for against unauthorized use. See the codes. ”Security” p. 60. The PIN code is usually supplied with the SIM card. Set the phone to request the Barring password PIN code each time the phone is The barring password (4 digits) is switched on. required when you use the Call The PIN2 code (4 to 8 digits) may barring service. See ”Security” be supplied with the SIM card and p. 60. You can obtain the password is required for some functions. from your service provider. If you enter an incorrect barring

10 Copyright © 2006 Nokia. All rights reserved. General information password three times in default configuration settings. succession, the password is Otherwise, the phone asks, blocked. Contact your service Activate saved configuration provider or network operator. settings? To discard the received settings, ■ Configuration select Show > Discard. settings service Before you use multimedia ■ Download content messaging, instant messaging and and applications presence, push to talk, e-mail, You may be able to download synchronization, streaming, and content, such as themes, tones, the browser, you must have the and video clips, to the phone proper configuration settings on (network service). Select the your phone. You may receive the download function (for example, settings directly as a configuration in Gallery). To access the message, which you save to your download function, see the phone. For more information on respective menu descriptions. For availability, contact your network availability of different services, operator, service provider, or pricing, and tariffs, contact your nearest authorized Nokia dealer. service provider. When you have received the Important: Use only settings as a configuration services that you trust and message, and the settings are not that offer adequate automatically saved and activated, security and protection Configuration settings received is against harmful software. displayed. To save the received settings, ■ Nokia support and select Show > Save. If the phone contact information requests Enter settings' PIN:, enter the PIN code for the settings, For the latest version of this guide, and select OK. To receive the PIN downloads, services and additional code, contact the service provider information related to your Nokia that supplies the settings. product, please visit www.nokia.com.hk/support or If no settings are saved, these your local Nokia web site. You may settings are saved and set as

Copyright © 2006 Nokia. All rights reserved. 11 General information also download free configuration settings such as MMS, GPRS, e- mail, and other services for your phone model at www.nokia.com.hk/settings. Should you still require assistance, please refer to www.nokia.com.hk/ contactus. To check for the nearest Nokia care center location for maintenance services, you may like to visit www.nokia.com.hk/carecenter

■ Install the SIM card 2. To remove the battery, lift it as and the battery shown (3). Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on 3. To release the SIM card holder, using SIM card services, contact gently pull the locking clip of your SIM card vendor. This may be the card holder, and open it (4) the service provider, network Insert the SIM card into the operator, or other vendor. SIM card holder (5). Make sure This device is intended for use with that the SIM card is properly the BP-6M battery. inserted and that the gold- The SIM card and its contacts can colored contact area on the easily be damaged by scratches or card is facing downwards. bending, so be careful when Close the SIM card holder (6), handling, inserting, or removing and press it until it snaps into the card. position. 1. With the back of the phone facing you, slide the back cover (1) to remove it from the phone (2).

4. Replace the battery (7) these functions and features may not function properly. Use only compatible microSD cards with this device. Other memory cards, such as reduced size MMCs, do not fit in the memory card slot and are not 5. Place the back cover in the compatible with this device. Using correct position (8). an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted. Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved 6. Slide the back cover into place industry standards for memory (9). cards but not all other brands may function correctly or be fully compatible with this device. You can use a memory card to extend the memory of Gallery. See ”Gallery” p. 64. You can insert or change the memory card without switching ■ Install a memory card the phone off. Important: Do not remove The phone’s the memory card in the microSD card middle of an operation included with when the card is being your phone accessed. Removing the contains preloaded ringing tones, card in the middle of an themes, tones, and graphics. If you operation may damage delete, reload, or replace this card, the memory card as well as the device, and data

stored on the card may be Warning: Use only corrupted. batteries, chargers, and To insert the memory card, open enhancements approved the memory card holder as shown by Nokia for use with this (1). Place the memory card in the particular model. The use card holder (2). Make sure that the of any other types may memory card is properly inserted— invalidate any approval or that it clicks into the holder—and warranty, and may be that the gold-colored contact area dangerous. on the card is facing upwards. For availability of approved Close the memory card holder. enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 1. Connect the charger to a wall outlet.

You can use the memory card to save your multimedia files, such as video clips, sound files, and 2. Connect the plug from the images, in Gallery. charger into the CA-44 charging adapter (not provided To format the memory card, see with the phone), and the ”Format memory card” p. 64. adapter plug into the jack on the bottom of your phone. ■ Charge the battery If the battery is completely Check the model number of any discharged, it may take a few charger before use with this minutes before the charging device. This device is intended for indicator appears on the use when supplied with power display or before any calls can from the AC-4, AC-1, AC-3, or DC- be made. 4 charger.

The charging time depends on the available, and you can make charger and the battery used. For emergency calls. example, charging a BP-6M Li-Ion battery with the AC-4 charger Set the time, time zone, takes about 1 hour and 55 minutes and date while the phone is in the standby Enter the local time, select the mode. time zone of your location in terms ■ of the time difference with respect Switch the phone on to Greenwich Mean Time (GMT), and off and enter the date. See ”Time and Warning: Do not switch date” p. 50. the phone on when wireless phone use is Plug and play service prohibited or when it may When you switch on your phone cause interference or for the first time, and the phone is danger. in the standby mode, you may be Press and hold the power key as asked to get the configuration shown. settings from your service provider (network service). Confirm or decline the query. See Connect to serv. support in ”Configuration” p. 60 and ”Configuration settings service” p. 11.

■ Normal operating position Use the phone only in its normal operating position. If the phone asks for a PIN or UPIN code, enter the code, and select Your device has an internal OK. antenna. You can switch on the phone in demo mode without a SIM card inserted. In this mode, all bearer- independent features are

Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.

■ Keys and parts • Push to talk key (8) •Power key (1)

• Loudspeaker (9) • Memory card slot (10) • Charger connector (11) • Enhancements connector (12)

• Earpiece (2) • Volume keys (13) • Left, middle, and right selection keys (3) • End key (4) • 4-way navigation key (5) • Call key (6) • Number keys (7)

• Infrared (IR) port (14) • Camera lens (15) • Camera key (16)

■ Standby mode • The right selection key (10) may be Names to access the list of When the phone is ready for use, contacts in the Contacts menu, and you have not entered any an operator-specific name to characters, the phone is in the access an operator-specific standby mode. Web site, or a shortcut to a • 3G indicator (1) function that you selected. See ”Right selection key” p. 51.

Active standby In the active standby mode, the phone can display separate content item windows, such as shortcuts (1), audio functions (2), the calendar (3), and a user note (4). To select whether active standby is shown, see Active standby in ”Standby settings” p. 49. • Signal strength of the cellular network (2) • Battery charge level (3) • Indicators (4) • The name of the network or the operator logo (5) •Clock (6) • Display (7) • The left selection key (8) is Go to or a shortcut to another function. See ”Left selection key” p. 51. • The middle selection key (9) When active standby is idle, to mode is Menu. access the menu structure, select Menu (5). To access the features

Copyright © 2006 Nokia. All rights reserved. 19 Your phone in active standby, press the My note — To enter a note, select navigation key up or down. the content window, write your To change the key to access the note, and save it. navigation mode, see Enabling Countdown timer — To start the active standby in ”Standby countdown timer, select the settings” p. 49. When the arrow content item. The remaining time indicators (6) are shown, you can with a note is shown. scroll the item left and right. General indicators — To show Content items in the standby indicators, such as date, navigation mode cell info display, info messages, Shortcut bar — To select a PTT default group name and closed shortcut, scroll to the desired user group index. The date is function, using left/right shown if the calendar is not navigation key, and select it. selected as active standby content. To change or organize the shortcuts when in the navigation Standby mode shortcuts mode, select Options > Active • To access the list of dialed standby > My active standby > numbers, press the call key Options > Personalise > once. See ”Make a voice call” p. Options > Select links or 23. Organise links. • To call your voice mailbox Audio applications — To switch on (network service) when you the radio or the music player, scroll have saved your voice mailbox to and select it. To change a track number in the phone, press and in the music player or a channel in hold 1. the radio, scroll left or right. To • To access video mail numbers, start the radio channel search, press and hold 2. scroll and hold left or right. • To connect to a browser Calendar — To view today’s notes, service, press and hold 0. select the desired one. To view the • To set shortcut functions for notes for the previous or next days, the navigation key, see scroll left or right. Navigation key in ”My shortcuts” p. 51.

• To change the profile, briefly text message. See also press the power key to open the ”Tones” p. 49. list of profiles. Scroll to the The alarm clock is set to desired profile, and select it. On. Power saver The countdown timer is running. To set the power saving function On, see Power saver in ”Display” The stopwatch is running p. 49. in the background. / The phone is registered to Indicators a GPRS, EGPRS, or You have unread messages WCDMA network. in the Inbox folder. / A packet data connection You have unsent, is established. canceled, or failed / The packet data messages in the Outbox connection is suspended folder. (on hold), for example, if The phone registered a there is an incoming or missed call. outgoing call during a packet data dial-up / Your phone is connected connection. to the instant messaging service, and the When the infrared availability status is online connection is activated, or offline. the indicator is shown continuously. You received one or several instant messages, A Bluetooth connection is and you are connected to active. the instant messaging If you have two phone service. lines, the second phone The keypad is locked. line is selected. The phone does not ring for an incoming call or

All incoming calls are When you end or reject the call, diverted to another the keypad automatically locks. number. For Automatic keyguard and The loudspeaker is Security keyguard, see ”Phone” activated, or the music p. 58. stand is connected to the When the keyguard is on, calls still phone. may be possible to the official Calls are limited to a emergency number programmed closed user group. into your device. The timed profile is selected.

, , , or A headset, hands-free, loopset, or music stand enhancement is connected to the phone. or A push to talk connection is active or suspended.

■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad; or select Lock. To unlock the keypad select Unlock, and press * within 1.5 seconds. If the Security keyguard is set On, select Unlock, press *, and enter the security code. To answer a call when the keyguard is on, press the call key.

■ Make a voice call ”Speed dials” p. 45. Call the number in either of the following 1. Enter the phone number, ways: including the area code. • Press the speed-dialing key, For international calls, press * then the call key. twice for the international prefix (the + character replaces •If Speed dialling is set to On, the international access code), press and hold a speed-dialing enter the country code, the key until the call begins. See area code without the leading ”Call” p. 58. 0, if necessary, and the phone number. Enhanced voice dialing 2. To call the number, press the To make a phone call, select and call key. hold Names, and say the name of 3. To end the call, or to cancel the the contact you wish to call. The call attempt, press the end key. phone will automatically associate a virtual voice tag with each To search for a name or phone contact in the phone memory. number that you have saved in Contacts, see ”Search for a Make a voice dialing call contact” p. 43. Press the call key to If an application is sending or call the number. receiving data using a packet data To access the list of phone connection, end the application numbers you have most recently before you use voice dialing in called or attempted to call, in the GSM. In WCDMA it is possible to standby mode, press the call key send voice and data once. To call the number, scroll to simultaneously. the number or name you want, and Voice commands are language- press the call key. dependent. To set the language, see Voice playback language in Speed dialing ”Phone” p. 58. Assign a phone number to one of the speed-dialing keys, 3 to 9. See

Note: Using voice tags To mute the ringing tone before may be difficult in a noisy you answer the call, select environment or during an Silence. emergency, so you should To end the call or reject a call, not rely solely upon voice press the end key. dialing in all circumstances. Call waiting 1. In the standby mode, press and During a call, to answer the hold the right selection key. A waiting call, press the call key. The short tone is played, and Speak first call is put on hold. To end the now is displayed. active call, press the end key. If you are using a compatible To activate the Call waiting headset with the headset key, function, see ”Call” p. 58. press and hold the headset key to start the voice dialing. ■ Options during a voice 2. Say the voice command clearly. If the voice recognition is call successful, a list with matches Many of the options that you use is shown. The phone plays the during a call are network services. voice command of the match For availability, contact your on the top of the list. After network operator or service about 1.5 seconds, the phone provider. dials the number; or if the Call options are Mute or Unmute, result is not the correct one, Contacts, Menu, Lock keypad, scroll to another entry, and Record, Loudspeaker, or Handset. select to dial the entry. Network services options are Using voice commands to carry Answer, Reject, Hold or Unhold, out a selected phone function New call, Add to conference, End is similar to voice dialing. See call, End all calls, and the Voice commands in ”My following: shortcuts” p. 51. Send DTMF — to send tone strings Swap — to switch between the ■ Answer or reject a active call and the call on hold voice call To answer a call, press the call key.

Transfer — to connect a call on while another voice, video, or data hold to an active call and call is active. disconnect yourself 1. To start a video call, enter the Conference — to make a phone number in the standby conference call that allows up to mode, or select Contacts and a five persons to take part in a contact. conference call 2. Press and hold the call key, or Private call — to discuss privately select Options > Video call. in a conference call Starting a video call may take a Warning: Do not hold the while. Video call and an device near your ear when outgoing animation is shown. the loudspeaker is in use, If the call is not successful (for because the volume may example, video calls are not be extremely loud. supported by the network, or the receiving device is not ■ compatible) you are asked if Make a video call you want to try a normal call or When you make a video call, you send a message instead. send a real-time video to the Tip: To increase or recipient of the call. The video decrease the volume image captured by the camera on during a call, press the the back of your phone is shown to volume keys. the video call recipient. This phone does not have a front camera. The video call is active when you can see two video images To be able to make a video call, you and hear the sound through the must have a USIM card and be loudspeaker. The call recipient connected in a WCDMA network. may deny the video sending, in For availability of and subscription which case you may see a still to video call services, contact your image or a grey background network operator or service graphic. You will hear the provider. A video call can only be sound. made between two parties. The video call can be made to a 3. To end the call, press the end compatible phone or an ISDN key. client. Video calls cannot be made

■ Answer or reject a voice call, End call, Send DTMF video call and Loudspeaker. When a video call arrives, Video Call is displayed. 1. Press the call key to answer the video call. Allow video image to be sent to caller? is displayed. If you select Yes, the image being captured by the camera in your phone is shown to the caller. If you select No, or do nothing, video sending is not activated, and you hear a sound. A graphic is displayed on top of the video, indicating that it is not sent. You can enable or disable video sending at any time during the video call. 2. To end the video call, press the end key. Even when you deny video sending during a video call, the call is still charged as a video call. Check the pricing with your network operator or service provider.

■ Options during a video call Select Options during a video call for the following options: Set contrast, Video motion, Switch to

To enter text (for example, when To select the prediction type, writing messages), use traditional select Prediction type > Normal or or predictive text input. To use Word suggestions. If you select traditional text input, press a Normal, indicated with , the number key, 1 to 9, repeatedly phone predicts the word on the until the desired character basis of the characters you enter. If appears. In predictive text input you select Word suggestions, you can enter a letter with a single indicated with , the phone keypress. predicts and completes the word When you write text, or before you enter all the characters. appears at the top left of the Tip: To quickly set display, indicating predictive text predictive text input on or input, and appears, indicating off when writing text, press traditional text input. , , # twice, or select and hold or appears next to the text Options. input indicator, indicating the character case. To change the ■ Predictive text input character case, press #. Predictive text input allows you to indicates number mode. To change write text quickly using the phone from the letter to number mode, keypad and a built-in dictionary. press and hold #, and select Number mode. 1. To start writing a word, use the 2 to 9 keys. Press each key only ■ Settings once for one letter. The phone displays * or the letter if it To set the writing language while separately has a meaning as a writing text, select Options > word. The entered letters are Writing language. displayed underlined. When writing text, select To insert a special character, Options > Prediction settings. press and hold *, or select To set predictive text input on or Options > Insert symbol. revert to traditional text input, Scroll to a character, and select select Prediction > On or Off. Use.

2. When you finish writing the available under the 1 key. For more word and it is correct, to characters, press *. confirm it, press 0 to add space. If the word is not correct, press * repeatedly, or select Options > Matches. When the word that you want appears, select Use. If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Complete the word (traditional text input is used), and select Save.

■ Traditional text input Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters that are available depend on the selected writing language. See ”Settings” p. 27. If the next letter you want is located on the same key as the present one, wait until the cursor appears; or briefly press any of the navigation keys, and enter the letter. The most common punctuation marks and special characters are

The phone offers you an extensive The menus, submenus, and setting range of functions, that are options are numbered. To access grouped into menus. some of them, use their shortcut 1. To access the menu, select number. Menu. To access the menu, select Menu. To change the menu view, Enter quickly, within 2 seconds, select Options > Main menu the shortcut number of the menu view > List, Grid, Grid with function you want to access. To labels or Tab. access the menu functions in menu level 1, enter 0 and 1. To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes. 2. Scroll through the menu, and select an option (for example, Settings). 3. If the selected menu contains further submenus, select the one that you want (for example, Call). 4. If the selected menu contains further submenus, repeat step 3. 5. Select the setting of your choice. 6. To return to the previous menu level, select Back. To exit the menu, select Exit.

You can read, write, send, and save that can be sent in a single text, multimedia, e-mail, audio, message. and flash messages. All messages At the top of the display, you can are organized into folders. see the message length indicator counting backwards from the ■ Text messages (SMS) maximum number of characters With the short message service supported by the phone. (SMS) you can send and receive text messages (network service). Write and send SMS Before you can send any text or messages SMS e-mail message, you must 1. Select Menu > Messaging > save your message center number. Create message > Text See ”Message settings” p. 40. message. To check SMS e-mail service 2. Enter the recipient’s phone availability and to subscribe to the number in the To: field. To service, contact your service retrieve a phone number from provider. To save an e-mail address Contacts, select Add > in Contacts, see ”Save numbers Contact. To send the message and text items” p. 43. to multiple recipients, add the Your device supports the sending desired contacts one by one. of text messages beyond the Scroll right to add new character limit for a single contacts manually in the To: message. Longer messages is sent field. To send the message to as a series of two or more persons in a group, select messages. Your service provider Contact group and the desired may charge accordingly. group. To retrieve the contacts Characters that use accents or to which you recently sent other marks, and characters from messages, select Add > some language options like Recently used. Chinese, take up more space limiting the number of characters

3. Scroll down, and write your 3. To reply to a message, select message in the Message: field. Reply > Text message, See ”Write text” p. 27. Multimedia, Flash message, or To insert a template into the Audio message. message, select Options > Use To send a text message to an e- template. mail address, enter the e-mail 4. To send the message, select address in the To: field. Send; or press the call key. See Scroll down, and write your ”Send a message” p. 33. message in the Message: field. See ”Write text” p. 27. Read and reply to an SMS If you want to change the message message type for your reply 1 message received or the number message, select Options > of new messages with _messages Change message type. received are shown when you have 4. To send the message, select received a message. Send; or press the call key. 1. To view a new message, select Show. To view it later, select ■ SIM messages Exit. SIM messages are text messages To read the message later, that are saved to your SIM card. select Menu > Messaging > You can copy or move those Inbox. If more than one messages to the phone memory, message is received, select the but not vice versa. Received message you want to read. messages are saved to the phone is shown if you have unread memory. messages in Inbox. To read SIM messages, select 2. To view the list of available Menu > Messaging > Options > options while reading a SIM messages. message, select Options. You can, for example, select to copy ■ Multimedia messages text from the beginning of a Note: Only devices that message to your phone have compatible features calendar as a reminder note. can receive and display multimedia messages. The

appearance of a message browsing session over WCDMA may vary depending on data. the receiving device. To check availability and to Write and send a subscribe to the multimedia multimedia message messaging network service, The wireless network may limit the contact your network operator or size of MMS messages. If the service provider. See ”Multimedia inserted picture exceeds this limit, message” p. 41. the device may make it smaller so A multimedia message can that it can be sent by MMS. contain text, sound, pictures, video 1. Select Menu > Messaging > clips, a business card, and a Create message > Multimedia. calendar note. If the message is 2. Enter your message. too large, the phone may not be able to receive it. Some networks Your phone supports allow text messages that include multimedia messages that an Internet address where you can contain several pages (slides). A view the multimedia message. message can contain a calendar note and a business Multimedia messaging supports card as attachments. A slide the following formats: can contain text, one image, • Picture: JPEG, GIF, animated and one sound clip; or text and GIF and WBMP a video clip. To insert a slide in • Sound: AMR audio the message, select New; or • Video clip: .3gp format with select Options > Insert > H.263 or MPEG video (QCIF Slide. resolution), WB or AMR audio To insert a file in the message, • Other: vCard (Business card) select Insert or Options > and vCalendar (Calendar note) Insert. The phone may not support all You can fetch images and video variations of the file formats. clips from the Gallery, or to take them directly from the You can receive multimedia viewfinder, select Options > messages during a call, another Insert > New Image or New Java application, or an active video clip.

3. To view the message before Note: When the phone sending it, select Options > sends the message, the Preview. animated is shown. 4. To send the message, select This is an indication that Send; or press the call key. See the message has been ”Send a message” p. 33. sent by your device to the message center number 5. Enter the recipient’s phone programmed into your number in the To: field. To device. This is not an retrieve a phone number from indication that the Contacts, select Add > message has been Contact. To send the message received at the intended to multiple recipients, add the destination. For more desired contacts one by one. To details about messaging send the message to persons in services, check with your a group, select Contact group service provider. and the desired group. To retrieve the contacts to which It takes more time to send a you recently sent messages, multimedia message than to send select Add > Recently used. a text message. While the message is being sent, you can use other Send a message functions on the phone. If an interruption occurs while the Copyright protections may prevent message is being sent, the phone some images, music (including tries to resend the message a few ringing tones), and other content times. If these attempts fail, the from being copied, modified, message remains in the Outbox transferred, or forwarded. folder. You can try to resend it When you finish writing your later. message, to send the message, select Send, or press the call key. Cancel message sending The phone saves the message in When the phone is saving a the Outbox folder, and sending message in the Outbox folder, starts. If you select Save sent Sending message or Sending messages > Yes, the sent message messages is displayed. To cancel is saved in the Sent items folder. the text message sending, select See ”General” p. 40. Cancel.

To cancel the sending of the To view the files in the multimedia messages in the presentation or the Outbox folder, scroll to the desired attachments, select Options > message, and select Options > Objects or Attachments. Cancel sending. 3. To reply to the message, select Options > Reply > Text Read and reply to a message, Multimedia, Flash multimedia message message, or Audio message. Important: Exercise Write the reply message. caution when opening If you want to change the messages. Multimedia message type for your reply message objects may message, select Options > contain malicious Change message type. The software or otherwise be new message type may not harmful to your device or support all the content that PC. you have added. Multimedia message received or 4. To send the message, select the number of new messages with Send; or press the call key. See _messages received is shown ”Send a message” p. 33. when you receive a new multimedia message. ■ Memory full 1. To read the message, select When you are receiving a message, Show. To view it later, select and the memory for the messages Exit. is full, Memory full. Unable to To read the message later, receive messages. is shown. To select Menu > Messaging > first delete old messages, select Inbox. Scroll to the message OK > Yes and the folder. Scroll to that you want to view, and the desired message, and select select it. is shown if you Delete. If one or more messages have unread messages in are marked, select Mark. Mark all Inbox. the messages you want to delete, 2. To view the whole message if and select Options > Delete the received message contains marked. a presentation, select Play.

To free phone memory, delete Menu > Messaging > Saved photos, ringing tones, or other items > Templates. data in the phone memory. ■ Flash messages ■ Folders Flash messages are text messages The phone saves received that are instantly displayed upon messages in the Inbox folder. reception. Flash messages are not Messages that have not yet been automatically saved. sent are saved in the Outbox folder. Write a flash message To set the phone to save the sent Select Menu > Messaging > messages in the Sent items folder, Create message > Flash message. see Save sent messages in Enter the recipient’s phone ”General” p. 40. number in the To: field. Write your To save the message that you are message in the Message: field. The writing and want to send later in maximum length of a flash the Drafts folder, select Menu > message is 70 characters. To send Messaging > Drafts. the message, select Send. You can move your messages to the Saved items folder. To Receive a flash message organize your Saved items A received flash message is subfolders, select Menu > indicated with Message: and a Messaging > Saved items > few words from the beginning of Saved messages or a folder that the message. To read the message, you add. To add a new folder for select Read. To extract phone your messages, select Options > numbers, e-mail addresses, and Add folder. To delete or rename a Web site addresses from the folder, scroll to the desired folder, current message, select Options > and select Options > Delete Use detail. folder or Rename folder. Your phone has templates. To ■ Audio messages create a new template, save or With this menu, use the copy a message as a template. To multimedia message service to access the template list, select create and send a voice message in

Copyright © 2006 Nokia. All rights reserved. 35 Messaging a convenient way. Multimedia message is received, select messaging service must be Show > Play. To listen to the activated before you can use audio message later, select Exit. Select messages. Options to see the available options. Create an audio message 1. Select Menu > Messaging > ■ E-mail application Create message > Audio The e-mail application uses a message. The recorder opens. packet data connection (network To use the recorder, see ”Voice service) to allow you to access recorder” p. 70. your e-mail account from your 2. To view the available options, phone when you are not in the select Options. office or at home. This e-mail application is different from the 3. Enter the recipient’s phone SMS e-mail function. To use the number in the To: field. To e-mail function on your phone, retrieve a phone number from you need a compatible e-mail Contacts, select Add > system. Contact. To send the message to multiple recipients, add the You can write, send, and read desired contacts one by one. To e-mail with your phone. You can send the message to persons in also save and delete the e-mail on a group, select Contact group a compatible PC. Your phone and the desired group. To supports POP3 and IMAP4 e-mail retrieve the contacts to which servers. you recently sent messages, Before you can send and retrieve select Add > Recently used. any e-mail messages, you must do 4. To send the message, select the following: Send. • Obtain a new e-mail account or use your current account. To Receive an audio message check the availability of your When your phone receives audio e-mail account, contact your messages, the number of messages e-mail service provider. and the text _messages received • Check your e-mail settings is shown. To open the message, with your network operator or select Play; or if more than one e-mail service provider. You

may receive the e-mail Write and send an e-mail configuration settings as a You can write your e-mail message configuration message. See before connecting to the e-mail ”Configuration settings service; or connect to the service service” p. 11. You can also first, then write and send your enter the settings manually. e-mail. See ”Configuration” p. 60. 1. Select Menu > Messaging > To activate the e-mail settings, E-mail > Write new e-mail. select Menu > Messaging > Message settings > E-mail 2. If more than one e-mail messages. See ”E-mail” p. 42. account is defined, select the account from which you want This application does not support to send the e-mail. keypad tones. 3. Enter the recipient’s e-mail address. Settings Wizard 4. Write a subject for the e-mail. The settings wizard will start automatically if no e-mail settings 5. Write the e-mail message. See are defined in the phone. To enter ”Write text” p. 27. the settings manually, select To attach a file to the e-mail, Menu > Messaging > E-mail > select Options > Attach file Options > Manage accounts > and a file from Gallery. Options > New. 6. To send the e-mail message The Manage accounts options immediately, select Send > allow you to add, delete, and Send now. change the e-mail settings. Make To save the e-mail in the sure that you have defined the Outbox folder to be sent later, correct preferred access point for select Send > Send later. your operator. See ”Configuration” To edit or continue writing your p. 60. e-mail later, select Options > The e-mail application requires an Save as draft. The e-mail is Internet access point without a saved in Outboxes > Drafts. proxy. WAP access points normally include a proxy and do not work To send the e-mail later, select with the e-mail application. Menu > Messaging >

E-mail > Options > Send now otherwise be harmful to or Send and check for e-mail. your device or PC. 1. Select Menu > Messaging > Download e-mail E-mail > Inboxes, the account 1. To download e-mail messages name, and the desired that have been sent to your message. e-mail account, select Menu > 2. While reading the message, Messaging > E-mail > Check select Options to view the for new e-mail. available options. If more than one e-mail 3. To reply to an e-mail, select account is defined, select the Reply > Original text or Empty account from which you want message. To reply to many, to download the e-mail. select Options > Reply to all. The e-mail application only Confirm or edit the e-mail downloads e-mail headers at address and subject, then write first. your reply. 2. Select Back. 4. To send the message, select Send > Send now. 3. Select Inboxes, the account name, and the new message, and select Retrieve to E-mail folders download the complete e-mail Your phone saves e-mail that you message. have downloaded from your To download new e-mail messages e-mail account in the Inboxes and to send e-mail that has been folder. The Inboxes folder contains saved in the Outbox folder, select the following folders: “Account Options > Send and check for name” for incoming e-mail, e-mail Archive for archiving e-mail, Custom 1—Custom 3 for sorting Read and reply to e-mail e-mail, Junk where all spam e- mail is stored, Drafts for saving Important: Exercise unfinished e-mail, Outbox for caution when opening saving e-mail that has not been messages. E-mail sent, and Sent items for saving messages may contain e-mail that has been sent. malicious software or

To manage the folders and their your voice mailbox number, select e-mail content, select Options to Voice mailbox number. view the available options of each If supported by the network, folder. indicates new voice messages. To call your voice mailbox number, Spam filter select Listen. The e-mail application allows you to activate a built-in spam filter. ■ Info messages To activate and define this filter, With the Info messages network select Options > Spam filter > service, you can receive messages Settings in the main e-mail idle on various topics from your service screen. The spam filter allows the provider. To check availability, user to put specific senders on a topics, and the relevant topic black or white list. Black list numbers, contact your service sender messages are filtered to the provider. Junk folder. Unknown and White list sender messages are ■ downloaded into the account Service commands inbox. To blacklist a sender, select Select Menu > Messaging > the e-mail message in the Inboxes Service commands. Write and folder and Options > Blacklist send service requests (also known sender. as USSD commands), such as activation commands for network ■ Voice messages services, to your service provider. The voice mailbox is a network ■ service, and you may need to Delete messages subscribe to it. For more To delete messages one by one, information and for your voice select Menu > Messaging > mailbox number, contact your Delete messages > By message service provider. and the folder from which you To call your voice mailbox, select want to delete messages. Scroll to Menu > Messaging > Voice the desired message, and select messages > Listen to voice Delete. To mark more than one messages. To enter, find, or edit message, select Options > Mark. Mark all the messages you want to

Copyright © 2006 Nokia. All rights reserved. 39 Messaging delete, and select Options > Graphical smileys > Yes — to set Delete marked. the phone to replace character- To delete all messages from a based smileys with graphical ones folder, select Menu > Messaging > Delete messages > Text message and SMS By folder and the folder to delete. e-mail Depending on the folder, the The text message settings affect phone asks if you want to delete the sending, receiving, and the messages. viewing of messages. To delete all messages from all Select Menu > Messaging > folders, select Menu > Message settings > Text Messaging > Delete messages > messages and from the following All messages > Yes. options: ■ Delivery reports > Yes — to ask the Message settings network to send delivery reports about your messages (network General service) General settings are common for Message centres > Add centre — text and multimedia messages. to set the phone number and name Select Menu > Messaging > of the message center that is Message settings > General required for sending text settings and from the following messages. You receive this number options: from your service provider. If you Save sent messages > Yes — to select SIM message centre, you set the phone to save the sent can view the SIM message center messages in the Sent items folder information. Overwriting in sent items — to Message centre in use — to select select whether overwriting is the message center in use allowed when messages are sent E-mail message centres > Add and the memory is full centre — to set the phone numbers Font size — to select the font size and name of the e-mail center for used in messages sending SMS e-mail. If you select SIM e-mail centre, you can view the SIM e-mail center information.

E-mail centre in use — to select Select Menu > Messaging > the SMS e-mail message center in Message settings > Multimedia use messages and from the following Message validity — to select the options: length of time for which the Delivery reports > Yes — to ask the network attempts to deliver your network to send delivery reports message about your messages (network Messages sent via — to select the service) format of the messages to be sent: Image size (multimedia) — to Text, Paging, or Fax (network define the default image size used service) in multimedia messages Use packet data > Yes — to set Default slide timing — to define GPRS or WCDMA as the preferred the default time between slides in SMS bearer multimedia messages Character support > Full — to Allow multimedia recept. — to select all characters in the receive or block the multimedia messages to be sent as viewed message, select Yes or No. If you Reply via same centre > Yes — to select In home network, you allow the recipient of your cannot receive multimedia message to send you a reply using messages when you are outside your message center (network your home network. The default service) setting of the multimedia message service is generally In home Multimedia message network. Incoming multim. msgs. — to The message settings affect the allow the reception of multimedia sending, receiving, and viewing of messages automatically, manually multimedia messages. after being prompted, or to reject You may receive the configuration the reception. This setting is not settings for multimedia messaging shown if Allow multimedia recept. as a configuration message. See is set to No. ”Configuration settings service” Allow adverts — to receive or p. 11. You can also enter the reject advertisements. This setting settings manually. See is not shown if Allow multimedia ”Configuration” p. 60.

Copyright © 2006 Nokia. All rights reserved. 41 Messaging recept. is set to No, or Incoming My name — Enter your name or multim. msgs. is set to Reject. nickname. Configuration settings > E-mail address — Enter your Configuration — only the e-mail address. configurations that support Include signature — You can multimedia messaging are shown. define a signature that is Select a service provider, Default, automatically added to the end of or Personal configuration for your e-mail when you write your multimedia messaging. Select message. Account and a multimedia Reply-to address — Enter the messaging service account e-mail address to which you want contained in the active the replies to be sent. configuration settings. SMTP user name — Enter the E-mail name that you want to use for outgoing mail. The settings affect the sending, receiving, and viewing of e-mail. SMTP password — Enter the password that you want to use for You may receive the configuration outgoing mail. settings for the e-mail application as a configuration message. See Display terminal window — Select ”Configuration settings service” Yes to perform manual user p. 11. You can also enter the authentication for intranet settings manually. See connections. ”Configuration” p. 60. Incoming server type — Select To activate the settings for the POP3 or IMAP4, depending on the e-mail application, select Menu > type of e-mail system that you are Messaging > Message settings > using. If both types are supported, E-mail messages and from the select IMAP4. following options: Incoming mail settings — Select Configuration — Select the set available options for POP3 or that you want to activate. IMAP4. Account — Select an account provided by the service provider.

You can save names and phone Contacts > Names > Options > numbers (contacts) in the phone Add new contact. Enter the last memory and in the SIM card name, first name, and the phone memory. number. The phone memory may save contacts with additional details, ■ Save numbers and such as various phone numbers text items and text items. You can also save In the phone memory for contacts an image or a video clip for a you can save different types of limited number of contacts. You phone numbers and short text can also use the video clip saved items per name. with a contact as a ringing tone for the contact. The first number you save is automatically set as the default The SIM card memory can save number, and it is indicated with a names with one phone number frame around the number type attached to them. The contacts indicator (for example, ). When saved in the SIM card memory are you select a name from contacts indicated by . (for example, to make a call), the default number is used unless you ■ Search for a contact select another number. Select Menu > Contacts > 1. Make sure that the memory in Names. Scroll through the list of use is Phone or Phone and SIM. contacts, or enter the first 2. Search for the contact to which characters of the name. you want to add a new number or text item, and select ■ Save names and Details > Options > Add phone numbers detail. Names and numbers are saved in 3. To add a number, select the used memory. To save a name Number and a number type. and phone number, select Menu >

To add another detail, select a ■ Edit contact details text type, an image or a video Search for the contact you want to clip from Gallery, or a new edit, and select Details. To edit a image. name, number, text item, or to To search for an ID from the change the image, select server of your service provider Options > Edit. You cannot edit if you have connected to the an ID when it is on the IM presence service, select User contacts list. ID > Search. If only one ID is found, it is automatically ■ Delete contacts saved. Otherwise, to save the ID, select Options > Save. To To delete all the contacts and the enter the ID, select Enter ID details attached to them from the manually. Enter the ID, and phone or SIM card memory, select select OK to save it. Menu > Contacts > Delete all contacts > From phone memory To change the number type, or From SIM card. Confirm with scroll to the desired number, the security code. and select Options > Change type. To set the selected To delete a contact, search for the number as the default number, desired contact, and select select Set as default. Options > Delete contact. 4. Enter the number or text item; To delete a number, text item, or to save it, select Save. an image attached to the contact, search for the contact, and select ■ Details. Scroll to the desired Copy contacts detail, and select Options > Search for the contact you want to Delete > Delete number, Delete copy, and select Options > Copy. detail, or Delete image. Deleting You can copy names and phone an image from contacts does not numbers from the phone contact delete it from Gallery. memory to the SIM card memory, or vice versa. The SIM card ■ Business cards memory can save names with one phone number attached to them. You can send and receive a person’s contact information from a compatible device that supports

44 Copyright © 2006 Nokia. All rights reserved. Contacts the vCard standard as a business ■ Groups card. Select Menu > Contacts > To send a business card, search for Groups to arrange the names and the contact whose information phone numbers saved in the you want to send, and select memory into caller groups with Details > Options > Send different ringing tones and group business card > Via multimedia, images. Via text message, Via infrared, or Via Bluetooth. ■ Speed dials When you receive a business card, To assign a number to a speed- select Show > Save to save the dialing key, select Menu > business card in the phone Contacts > Speed dials, and scroll memory. To discard the business to the speed-dialing number that card, select Exit > Yes. you want. ■ Select Assign, or if a number has Settings already been assigned to the key, Select Menu > Contacts > select Options > Change. Select Settings and from the following Search and the contact you want options: to assign. If the Speed dialling Memory in use — to select the SIM function is off, the phone asks card or phone memory for your whether you want to activate it. contacts. Select Phone and SIM to See also Speed dialling in ”Call” recall names and numbers from p. 58. both memories. In that case, when To make a call using the speed- you save names and numbers, they dialing keys, see ”Speed dialing” are saved in the phone memory. p. 23. Contacts view — to select how the names and numbers in Contacts ■ Service and my are displayed numbers Name display — to select whether Select Menu > Contacts and from the contact’s first or last name is the following options: displayed first Service numbers — to call the Memory status — to view the free service numbers of your service and used memory capacity provider if the numbers are

Copyright © 2006 Nokia. All rights reserved. 45 Contacts included on your SIM card (network service) My numbers — to view the phone numbers assigned to your SIM card. This is only shown if the numbers are included on your SIM card.

To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients. To view the approximate information on your recent communications, select Menu > Log > Call duration, Packet data counter, or Packet data timer. To view how many text and multimedia messages you have sent and received, select Menu > Log > Message log. Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. Note: Some timers, including the life timer, may be reset during service or software upgrades.

■ Profiles flight icon is visible next to the battery charge level. Your phone has various setting groups, called profiles, which you Select Settings > Profiles > Flight can customize for different events and from the following and environments. options:Activate > Personalise Select Menu > Settings > Profiles To deactivate the flight mode, you and the desired profile. Select scroll to and select any other from the following options: profile. Every time you try to make a call, you are asked if you want to Activate — to activate the selected Exit flight profile? click Yes to profile deactivate Flight mode. Personalise — to personalize the In the flight mode you can make profile. Select the setting you an emergency call. Enter the want to change, and make the emergency number, press the call changes. key, and select Yes when asked Timed — to set the profile to be Exit flight profile? The phone active until a certain time up to 24 attempts to make an emergency hours, and set the end time. When call. the time set for the profile expires, When the emergency call ends, the the previous profile that was not phone automatically enters the timed becomes active. general profile mode. Flight mode ■ Themes You can deactivate all radio frequence functionality and still A theme contains many elements have access to games, calendar for personalizing your phone, such and phonebook. Use flight mode in as wallpaper, screen saver, color radio sensitive environments—on scheme, and a ringing tone. board airplanes or in hospitals. Select Menu > Settings > Themes When the flight mode is active, the and from the following options:

Select theme — to set a theme in Standby mode your phone. A list of folders in Gallery opens. Open the Themes Enable or disable active folder, and select a theme. standby from idle To enable the active standby Theme downloads — to open a list mode, select Menu > Settings > of links to download more themes Display > Standby mode settings > Active standby > My ■ Tones active standby. You can change the settings of the To disable the active standby selected active profile. mode, select Menu > Settings > Select Menu > Settings > Tones Display > Standby mode > Incoming call alert, Ringing settings > Active standby > Off. tone, Ringing volume, Vibrating alert, Push to talk settings, Standby settings Message alert tone, Instant msg. Select Menu > Settings > alert tone, Keypad tones, or Display > Standby mode settings Warning tones. You can find the and from the following options: same settings in the Profiles menu. Active standby > My active standby — to display the active To set the phone to ring only upon standby. Select Options and from calls from phone numbers that the following options: belong to a selected caller group, select Alert for. Scroll to the caller • Personalise — to change the group you want or All calls, and content on the display select Mark. • Organise — to reorganize the content on the display ■ Display • Enabling active standby — to With display settings you can change the key for accessing personalize your phone display the navigation mode. The same view. setting is also in the My shortcuts menu. See ”Enable active standby” p. 51. Wallpaper — to set your phone to display an image or a slide as

Copyright © 2006 Nokia. All rights reserved. 49 Settings wallpaper when the phone is in Power saver the standby mode. Select To save some battery power, select Wallpapers > Image or Slide set. Menu > Settings > Display > Select an image or a slide from Power saver. A digital clock is Gallery, and Options > Set as displayed when no function of the wallpaper. To download more phone is used for a certain time. graphics, select Graphic downloads. Sleep mode Standby font colour — to select To save most battery power, select the color for the texts on the Menu > Settings > Display > display in the standby mode Sleep mode. The display turns Navigation key icons — to set the completely black when no scroll key icons that are shown in function of the phone is used for a the standby mode certain time. Operator logo — to set your phone to display or hide the operator Font size logo To set the font size for reading and Cell info display > On — to receive writing messages and viewing information from the network contacts and Web pages, select operator depending on the Menu > Settings > Display > network cell used (network Font size. service) ■ Time and date Screen saver To change the time, time zone, and To select a screen saver from date settings, select Menu > Gallery, select Menu > Settings > Settings > Time and date > Clock, Display > Screen saver > Screen Date, or Auto-update of date/ savers > Image, Slide set, Video time (network service). clip, or Open camera. To download When traveling to a different time more screen savers, select Graphic zone, select Menu > Settings > downloads. To select the time Time and date > Clock > Time after which the screen saver is zone and the time zone of your activated, select Time-out. To location in terms of the time activate the screen saver, select difference with respect to On.

Greenwich Mean Time (GMT) or you want to move, and select Universal Time Coordinated (UTC). Move. Scroll to where you want to The time and date are set move the function, and select OK. according to the time zone and enable your phone to display the Right selection key correct sending time of received To select a function from the list text or multimedia messages. For for the right selection key, select example, GMT +8 denotes the time Menu > Settings > My zone for HK. shortcuts > Right selection key. See also ”Standby mode” p. 19. ■ My shortcuts With personal shortcuts you get Navigation key quick access to often used To select shortcut functions for functions of the phone. the scroll keys, select Menu > Settings > My shortcuts > Left selection key Navigation key. Scroll to the To select a function from the list desired key and select Change and for the left selection key, select a function from the list. To remove Menu > Settings > My a shortcut function from the key, shortcuts > Left selection key. select (empty). To reassign a See also ”Standby mode” p. 19. function for the key, select Assign. To activate a function in the See ”Standby mode shortcuts” p. standby mode if the left selection 20. key is Go to, select Go to and the desired function on your personal Enable active standby shortcut list. Select Options and To select the key to access the from the following options: active standby navigation mode, Select options — to add a function select Menu > Settings > My to the shortcut list, or to remove shortcuts > Enabling active one. Scroll to the function, and standby > Navigation key up, select Mark or Unmark. Navigation key down, or Navigation key up/down. Organise — to rearrange the functions on your personal shortcut list. Scroll to the function

Voice commands ■ Connectivity You can call contacts and carry out You can connect the phone to a phone functions by saying voice compatible device using an commands. Voice commands are infrared, Bluetooth wireless language-dependent. To set the technology, or USB data cable language, see Voice playback (CA-53 or DKU-2) connection. You language in ”Phone” p. 58. can also define the settings for The phone voice commands are packet data dial-up connections. active by default. Select Menu > Settings > My shortcuts > Voice Bluetooth wireless commands and a folder. Scroll to a technology function. indicates that the This device is compliant with voice tag is activated. To play the Bluetooth Specification 2.0 activated voice command, select supporting the following profiles: Play. To use voice commands, see hands-free, headset, object push ”Enhanced voice dialing” p. 23. profile, file transfer profile, dial-up To manage the voice commands, networking profile, SIM access scroll to a phone function, and profile, and serial port profile. To select from the following options: ensure interoperability between Edit or Remove — to change or other devices supporting deactivate the voice command of Bluetooth technology, use Nokia the selected function. When you approved enhancements for this edit the voice tag text, the phone model. Check with the associates it to a new virtual voice manufacturers of other devices to tag. determine their compatibility with this device. Add all or Remove all — to activate or deactivate voice There may be restrictions on using commands to all functions in the Bluetooth technology in some voice commands list. Add all or locations. Check with your local Remove all is not shown if all authorities or service provider. voice commands are active or Features using Bluetooth inactive. technology, or allowing such features to run in the background while using other features,

52 Copyright © 2006 Nokia. All rights reserved. Settings increase the demand on battery that you want to connect to the power and reduce the battery life. phone. Bluetooth technology allows you Paired devices — to search for any to connect the phone to a Bluetooth device in range. Select compatible Bluetooth device New to list any Bluetooth device within 10 meters (32 feet). Since in range. Scroll to a device, and devices using Bluetooth select Pair. Enter the Bluetooth technology communicate using passcode of the device to radio waves, your phone and the associate (pair) the device to your other devices do not need to be in phone. You must only give this direct line-of-sight, although the passcode when you connect to the connection can be subject to device for the first time. Your interference from obstructions phone connects to the device, and such as walls or from other you can start data transfer. electronic devices. Bluetooth wireless Set up a Bluetooth connection connection Select Menu > Settings > Select Menu > Settings > Connectivity > Bluetooth. To Connectivity > Bluetooth and check which Bluetooth connection from the following options: is currently active, select Active Bluetooth > On or Off — to devices. To view a list of Bluetooth activate or deactivate the devices that are currently paired Bluetooth function. indicates with the phone, select Paired an active Bluetooth connection. devices. When activating Bluetooth Select Options to access available technology for the first time, you options depending on the status of are asked to give a name for the the device and the Bluetooth phone. Please note that this name connection. Select Connect > will be viewed by other people - Assign short name or Auto-conn. use a unique name that is easy for without conf.. others to identify. Search for audio enhanc. — to Bluetooth settings search for compatible Bluetooth To define how your phone is shown audio devices. Select the device to other Bluetooth devices, select

Menu > Settings > there are no obstructions between Connectivity > Bluetooth > the devices. Bluetooth settings > My phone's To activate the IR port of your visibility or My phone's name. phone, select Menu > Settings > Operating the phone in hidden Connectivity > Infrared. mode is a safer way to avoid To deactivate the IR connection, malicious software. select Menu > Settings > Do not accept Bluetooth Connectivity > Infrared. When the connectivity from sources you do phone displays Deactivate not trust. infrared?, select Yes. As another alternative, - switch If data transfer is not started off the Bluetooth functionality. within 2 minutes after the This will not affect other activation of the IR port, the functionalities of the phone. connection is canceled and must be started again. Infrared IR connection indicator You can send or receive data to or When is shown continuously, from a compatible phone or data the IR connection is activated, and device (for example, a computer) your phone is ready to send or through the infrared (IR) port of receive data through its IR port. your phone. To use an IR When blinks, your phone is connection, the device with which trying to connect to the other you want to establish a device, or a connection has been connection must be IrDA lost. compliant. Do not point the IR (infrared) beam Packet data at anyone's eye or allow it to WCDMA and general packet radio interfere with other IR devices. service (GPRS) are network This device is a Class 1 laser services that allow mobile phones product. to send and receive data over an When sending or receiving data, Internet protocol protocol ensure that the IR ports of the (IP)based network. WCDMA and sending and receiving devices are GPRS are data bearers that enable pointing at each other and that

54 Copyright © 2006 Nokia. All rights reserved. Settings wireless access to data networks If you receive a call or a text such as the Internet. message, or make a call during a Enhanced GPRS (EGPRS) is similar packet data connection, or to GPRS but enables faster indicates that the packet data connections. For more information connection is suspended (on hold). on availability of EGPRS and data When needed to register and transfer speed, contact your establish a packet data connection network operator or service when an application using packet provider. data needs it, and to close the The applications that may use connection when you end the WCDMA or (E)GPRS are MMS, application. video streaming, browsing sessions, e-mail, remote SyncML, Packet data settings Java application downloading, and You can connect the phone using the PC dial-up. Bluetooth wireless technology, When you have selected GPRS as a infrared, or USB data cable data bearer, the phone uses EGPRS connection to a compatible PC and instead of GPRS if this is available use the phone as a modem to in the network. You cannot select enable packet data connectivity between EGPRS and GPRS, but for from the PC. some applications you may be able To define the settings for the to select GPRS or GSM data packet data connections from your (circuit switched data, CSD). PC, select Menu > Settings > Connectivity > Packet data > Packet data connection Packet data settings > Active Select Menu > Settings > access point, and activate the Connectivity > Packet data > access point you want to use. Packet data connection, and from Select Edit active access point > the following options: Alias for access point, enter a name to change the access point Always online to set the phone to settings, and select OK. Select automatically register to a packet Packet data access point, enter data network when you switch on the access point name (APN) to the phone. or indicates that establish a connection to a the packet data service is network, and select OK. available.

You can also set the packet data Phone synchronisation or Phone service settings (access point copy, and enter the settings name) on your PC using the Nokia according to the transfer type. Modem Options software. See To edit the copy and synchronize ”Nokia PC Suite” p. 94. If you have settings, select a contact from the set the settings both on your PC partner list and Options > Edit. and on your phone, the PC settings To delete a partner, select a are used. contact from the partner list and Options > Delete, and confirm Data transfer Delete transfer contact?. You Synchronize your calendar, cannot delete Server contacts data, and notes with synchronisation or PC another compatible device (for synchronisation. example, a mobile phone), a compatible PC, or a remote Data transfer with a Internet server (network service). compatible device Partner list For synchronization, Bluetooth To copy or synchronize data from wireless technology or infrared is your phone, the name of the used. The other device is in the device and the settings must be in standby mode. the list of partners in transfer To start data transfer, select contacts. If you receive data from Menu > Settings > another device (for example, a Connectivity > Data transfer and compatible mobile phone), the the transfer partner from the list, partner is automatically added to other than Server synchronisation the list, using the contact data or PC synchronisation. According from the other device. Server to the settings, the selected data is synchronisation and PC copied or synchronized. The other synchronisation are the original device also must be activated for items in the list. receiving data. To add a new partner to the list (for example, a new device), select Menu > Settings > Connectivity > Data transfer > Options > Add transfer contact >

Data transfer without SIM required for this service, contact card your service provider. You may receive the settings as a Your phone allows data transfer configuration message. See when the SIM card is not inserted. ”Configuration settings service” Switch on your phone with no SIM p. 11 and ”Configuration” p. 60. card inserted, and select Transfer If you have saved data on the and from the following options: remote Internet server, to Send data — to select a contact, synchronize your phone, start the other than Server synchronisation synchronization from your phone. and PC synchronisation, from the Select Menu > Settings > partner list to transfer data from Connectivity > Data transfer > your phone. The phone starts a Server synchronisation. synchronization or copy session. Depending on the settings, select Receive data > Via Bluetooth or Initialising synchronisation or Via infrared — to receive data Initialising copy. from the other phone If the contacts or calendar are full, synchronizing for the first time or Synchronize from a after an interrupted compatible PC synchronization may take up to 30 Before you synchronize data from minutes to complete. calendar, notes, and contacts from a compatible PC, you must install USB data cable the Nokia PC Suite software of You can use the USB data cable to your phone on the PC. Use transfer data between the memory Bluetooth wireless technology, card inserted in the phone and a infrared, or a USB data cable for compatible PC or a printer the synchronization, and start the supporting PictBridge. You can synchronization from the PC. also use the USB data cable with Nokia PC Suite. Synchronize from a server To activate the memory card for To use a remote Internet server, data transfer or picture printing, you must subscribe to a connect the USB data cable; when synchronization service. For more the phone displays USB data cable information and the settings connected. Select mode., select

OK. Select from the following assigned to the speed-dialing keys modes: 3 to 9, press and hold the Default mode — to use the cable corresponding number key for PC Suite Call waiting > Activate — to have To change the USB mode, select the network notify you of an Menu > Settings > incoming call while you have a call Connectivity > USB data cable > in progress (network service). See Default mode, Printing, or Data ”Call waiting” p. 24. storage. Summary after call > On — to briefly display the approximate ■ Call duration and cost (network service) of the call after each call Select Menu > Settings > Call and from the following options: Send my caller ID > Yes — to show your phone number to the person Call divert — to divert your you are calling (network service). incoming calls (network service). To use the setting agreed upon You may not be able to divert your with your service provider, select calls if some call barring functions Set by network. are active. See Call barring service in ”Security” p. 60. ■ Phone Anykey answer > On — to set the phone to answer an incoming call Select Menu > Settings > Phone by pressing any key except the and from the following options: power and end keys. Language settings — to set the Automatic redial > On — to make display language of your phone, a maximum of 10 attempts to select Phone language. If you connect the call after an select Automatic, the phone unsuccessful call attempt selects the language according to the information on the SIM card. Video to voice auto-redial — to select whether the phone To select the USIM card language, automatically makes a voice call select SIM language. to the number to which a video To set a language for the voice call failed. playback, select Voice playback Speed dialling > On — to dial the language. See ”Make a voice names and phone numbers dialing call” p. 23 and Voice

58 Copyright © 2006 Nokia. All rights reserved. Settings commands in ”My shortcuts” p. agreement with your home 51. network operator. Memory Status — to see how Confirm SIM serv. actions — See much of the phone’s memory is ”SIM services” p. 93. reserved and how much is free. Help text activation — to select Automatic keyguard — to set the whether the phone shows help keypad of your phone to lock texts automatically after a preset time Start-up tone — to select whether delay when the phone is in the the phone plays a tone when the standby mode and no function of phone is switched on. the phone has been used. Select Flight query —to select whether On, and set the time. Activate flight profile? appears Security keyguard — to set the every time the phone is switched phone to ask for the security code on if the flight mode was set when you unlock the keyguard. before switching off the device. Enter the security code, and select See ”Flight mode” p. 48. On. When the keyguard is on, calls still ■ Enhancements may be possible to the official This menu is shown only if the emergency number programmed phone is or has been connected to into your device. a compatible mobile Welcome note — to write the note enhancement. you would like to be shown briefly Select Menu > Settings > when the phone is switched on. Enhancements. Depending on the Network mode — to select dual enhancement, you can select some mode (UMTS and GSM), UMTS, or of the following options: GSM. You cannot access this Default profile — to select the option during an active call. profile that you want to be Operator selection > Automatic automatically activated when you — to set the phone to connect to the selected automatically select one of the enhancement cellular networks available in your Automatic answer — to set the area. With Manual you can select phone to answer an incoming call a network that has a roaming automatically after 5 seconds. If

Incoming call alert is set to Beep Activ. default in all apps. — to once or Off, automatic answer is activate the default configuration off. settings for supported applications Preferred access point — to view ■ Configuration the saved access points. Scroll to You can configure your phone with an access point, and select settings that are required for Options > Details to view the certain services to function name of the service provider, data correctly. The services are bearer, and packet data access multimedia messaging, instant point or GSM dial-up number. messaging, synchronization, Connect to serv. support — to e-mail application, streaming, download the configuration push to talk, IM and Web. Your settings from your service provider service provider may also send you if this is supported by the service these settings. See ”Configuration provider settings service” p. 11. Personal config. settings — to add For information on availability and new personal accounts for various the appropriate configuration services, and to activate or delete settings, contact your network them. To add a new personal operator or service provider. account if you have not added any, Select Menu > Settings > select Add; otherwise, select Configuration and from the Options > Add new. Select the following options: service type, and select and enter each of the required parameters. Default config. settings — to view The parameters differ according to the service providers saved in the the selected service type. To delete phone. Scroll to a service provider, or activate a personal account, and select Details to view the scroll to it, and select Options > applications that the Delete or Activate. configuration settings of this service provider support. To set the ■ configuration settings of the Security service provider as default When security features that settings, select Options > Set as restrict calls are in use (such as default. To delete configuration call barring, closed user group, and settings, select Delete. fixed dialing) calls still may be

60 Copyright © 2006 Nokia. All rights reserved. Settings possible to the official emergency Security level > Phone — to set number programmed into your the phone to ask for the security device. code whenever a new SIM card is Select Menu > Settings > inserted into the phone. If you Security and from the following select Security level > Memory, options: the phone asks for the security code when the SIM card memory is PIN code request and UPIN code selected, and you want to change request — to set the phone to ask the memory in use. for your PIN or UPIN code every time the phone is switched on. Access codes — to change the Some SIM cards do not allow the security code, PIN code, PIN2 code, code request to be turned off. or barring password PIN2 code request — to select Code in use — to select whether whether the PIN2 code is required the PIN code or UPIN code should when using a phone feature that is be active protected by the PIN2 code. Some Authority certificates or User SIM cards do not allow the code certificates — to view the list of request to be turned off. the authority or user certificates Call barring service — to restrict downloaded into your phone. See incoming calls to and outgoing ”Certificates” p. 90. calls from your phone (network Security module settings — to service). A barring password is view Security module details, required. activate Module PIN request, or Fixed dialling — to create, edit, change the module PIN and and activate a list of phone signing PIN. See also ”Access numbers or prefixes. When the list codes” p. 10. is activated, you can only call or send messages to the numbers on ■ Digital rights the list. If the SIM card does not management support this option, Fixed dialling Digital rights management (DRM) is hidden. is copyright protection, designed Closed user group — to specify a to prevent modification and to group of people whom you can call limit distribution of protected and who can call you (network files. When you download service) protected files, such as sound,

Copyright © 2006 Nokia. All rights reserved. 61 Settings video, themes, or ringing tones to your phone, the files are free, but locked. You pay for the key to activate the file and the activation key is automatically sent to your phone when you download the file. To view the permissions for a protected file, scroll to the file, and select Options > Activation keys. For example, you can see how many times you can view a video or how many days you have left for listening to a song. To extend the permissions for a file, select Options and the corresponding option for the file type, such as Activate theme. You can send certain types of protected files to your friends, and they can buy their own activation keys. This phone supports OMA DRM 1.0.

■ Restore factory settings To reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett.. Enter the security code.

This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information, contact your network operator. If this menu is not shown, the other menu numbers change accordingly. The operator can update this menu with a service message. For more information, see ”Service inbox” p. 89.

In this menu you can manage 3. Scroll to the file you want to graphics, images, recordings, and view, and select Open. For the tones. These files are arranged in available options, select folders. Options. Your phone supports an activation Copyright protections may prevent key system to protect acquired some images, music (including content. Always check the delivery ringing tones), and other content terms of any content and from being copied, modified, activation key before acquiring transferred or forwarded. them, as they may be subject to a fee. ■ Format memory card The files stored in Gallery use a To format a new memory card, memory that mainly consists of select Menu > Gallery. Scroll to the microSD card of your phone. the memory card folder, and select You can store images, themes, Options > Format memory card. graphics, ringing tones, video clips, and sound clips in Gallery. To manage the files and folders, do the following: 1. Select Menu > Gallery. A list of folders is shown. If a memory card is inserted in the phone, the folder Memory card, (unformatted), or the name of the memory card is shown. 2. Scroll to the desired folder. To view a list of files in the folder, select Open. For the available options, select Options.

■ Camera 2. To take a photo, press the camera key, or select Capture. You can take photos or record video clips with the built-in 2 megapixel camera. The camera produces pictures in .jpg format and video clips in .3gp format, and you can zoom up to eight times.

Take a photo The phone saves the photo in Gallery > Images unless you 1. To open the camera viewfinder, set the phone to use the select Menu > Media > memory card for saving the Camera. photos. If Video is selected as the 3. To take another photo, press default mode, select Options > the camera key after the photo Still image. saving indicator stops moving. To zoom in or out, press the To send the photo as a volume key up or down, or the multimedia message, select left/right navigation key. Options > Send. To take up to four photos in Tip: To activate the camera, quick succession, select press the camera key. To Options > Img. sequence on. activate video, press and The higher the resolution, the hold the camera key. fewer photos you can take This device supports an image sequentially. capture resolution of 1600 x 1200 pixels. The image resolution in these materials may appear different.

Record a video clip from a network server (network Select Menu > Media > service). Camera > Options > Video > Select Menu > Media > Media Record. To pause the recording, player > Open gallery, select Pause; to resume the Bookmarks, Go to address, or recording, select Continue. To Media downloads. stop the recording, select Stop. The phone saves the recording in Progressive download Gallery > Video clips. To change Progressive download allows you the folder for saving the to watch a video while it is being recordings, see ”Camera settings” downloaded and saved in the p. 66. background. Playback starts immediately when enough data Camera settings has been buffered. Select Menu > Media > Select Menu > Media > Media Camera > Options > Settings. player > Open gallery, You can define Image quality, Bookmarks, Go to address, or Image size, Video clip quality, Media downloads. Video clip length, Camera sounds, To learn more about accessing Default title, Image and video videos see ”Download content and storage, and Default mode. In applications” p. 11. Image and video storage you can select the folder or memory card to save your photos and video Set up the phone for a clips. streaming service This device supports the following You may receive the configuration video sizes: SubQCIF, QCIF, CIF, and settings required for streaming as VGA. a configuration message from the network operator or service ■ provider. See ”Configuration Media player settings service” p. 11. You can With the media player you can also enter the settings manually. view, play, and download files, See ”Configuration” p. 60. such as images, audio, video, and To activate the settings, do the animated images. You can also following: view compatible streaming videos

1. Select Menu > Media > Media track on the default track list player > Streaming settings > are shown. Configuration To use the graphical keys , 2. Only the configurations that , , or on the display, support streaming are shown. scroll left or right to the desired Select a service provider, key, and select it. Default, or Personal 2. To play a track, scroll to the configuration for streaming. track that you want, and select 3. Select Account and a . streaming service account To adjust the volume level, use contained in the active the volume keys on the side of configuration settings. the phone. ■ To skip to the beginning of the Music player next track, select . To skip to Your phone includes a music the beginning of the previous player for listening to music track, select twice. tracks, recordings, or other .mp3, To rewind the current track, .mp4, or .aac format sound files select and hold . To fast that you have transferred to the forward the current track, phone with the Nokia Audio select and hold . Release the Manager application. .mp3 and key at the position you want. .aac format files are stored in the 3. To stop the playing, select . memory card or in the Gallery folders. Music files saved in the Warning: Listen to music Music files folder and in another at a moderate level. location, such as a folder of the Continuous exposure to memory card, are automatically high volume may damage detected and added to the default your hearing. Do not hold track list. the device near your ear when the loudspeaker is Play the music tracks in use, because the transferred to the phone volume may be extremely loud. 1. Select Menu > Media > Music player. The details of the first

Music player settings Tip: When using a headset, In the Music player menu, the to skip to the next track, following options may be press the headset key. available: Send — to send the selected file Play via bluetooth — to make a using MMS, Bluetooth wireless connection to an audio technology, or an infrared enhancement using a Bluetooth connection connection Music downloads — to connect to Track list — to view all the tracks a browser service related to the available on the track list. To play a current track. This function is only track, scroll to the desired track, available when the address of the and select Play. service is included in the track. Select Options > Refresh all Memory status — to view the free tracks or Change track list to and used memory capacity refresh the track list (for example, after adding new tracks to the list) ■ Radio or to change the track list that is The FM radio depends on an shown when you open the Music antenna other than the wireless player menu, if several track lists device’s antenna. A compatible are available in the phone. headset or enhancement needs to Play options > Random > On — to be attached to the device for the play the tracks in the track list in FM radio to function properly. random order. Select Repeat > Warning: Listen to music Current track or All tracks to play at a moderate level. the current track or the entire Continuous exposure to track list repeatedly. high volume may damage Media equaliser — to open the list your hearing. Do not hold of media equalizer sets. See the device near your ear ”Equalizer” p. 71. when the loudspeaker is Loudspeaker or Headset — to in use, because the listen to the music player through volume may be extremely the loudspeaker or a compatible loud. headset connected to the phone Select Menu > Media > Radio.

To use the graphical keys , , Save station — to enter a channel , or on the display, scroll left name and save the new channel or right to the desired key, and Visual Radio — to set whether the select it. Visual Radio application is used. Some radio channels may send Save radio channels text or graphical information that 1. To start the channel search, you can view using the Visual select and hold or . To Radio application. change the radio frequency in Note: This feature may 0.05 MHz steps, briefly press not be available in your or . product due to your 2. To save the channel to a subscription (network memory location, 1 to 9, press service). and hold the corresponding Visual Radio settings — to select number key. To save the the options for Visual Radio. To set channel to a memory location whether the Visual Radio from 10 to 20, press briefly 1 or application starts automatically 2, and press and hold the when you turn on the radio, select desired number key, 0 to 9. Enable visual service > 3. Enter the name of the channel, Automatically. and select OK. Stations — to select the list of saved channels. To delete or Listen to the radio rename a channel, scroll to the Select Menu > Media > Radio. To desired channel, and select scroll to the desired channel, Options > Delete station or select or , or press the Rename. headset key. To select a radio Mono output or Stereo output — channel location, briefly press the to listen to the radio in corresponding number keys. To monophonic sound or in stereo adjust the volume, press the Loudspeaker or Headset — to volume keys. listen to the radio using the Select from the following options: loudspeaker or headset. Keep the Switch off — to turn off the radio headset connected to the phone. The lead of the headset functions as the radio antenna.

Set frequency — to enter the Record. While recording a call, frequency of the desired radio all parties to the call hear a channel faint beeping sound about You can normally make a call or every 5 seconds. When answer an incoming call while recording a call, hold the phone listening to the radio. During the in the normal position near to call, the volume of the radio is your ear. muted. 3. To end the recording, select When an application using a . The recording is saved in packet data or HSCSD connection Gallery > Recordings. is sending or receiving data, it may 4. To listen to the latest recording, interfere with the radio. select Options > Play last recorded. ■ Voice recorder 5. To send the last recording using You can record pieces of speech, infrared, Bluetooth wireless sound, or an active call, and save technology, or a multimedia them in Gallery or a memory card. message, select Options > This is useful when recording a Send last recorded. name and phone number to write down later. List of recordings The recorder cannot be used when Select Menu > Media > Voice a data call or GPRS connection is recorder > Options > Recordings active. list. The list of folders in the Gallery is shown. Open Recordings Record sound to see the list with recordings. Select Options to select options 1. Select Menu > Media > Voice for files in the Gallery. See recorder. ”Gallery” p. 64. To use the graphical keys , , or on the display, scroll Define a storage folder left or right to the desired key, and select it. To use another folder than Recordings as the default folder in 2. To start the recording, select Gallery, select Menu > Media > . To start the recording Voice recorder > Options > Select during a call, select Options >

■ Equalizer You can control the sound quality when using the music player by amplifying or diminishing frequency bands. Select Menu > Media > Equaliser. To activate a set, scroll to one of the equalizer sets, and select Activate. To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed.

Note: This feature may service settings. See ”PTT settings” not be available in your p. 76. product due to your While you are connected to the subscription (network PTT service, you can use the other service). functions of the phone. The PTT Push to talk (PTT) over cellular is a service is not connected to two-way radio service available traditional voice communication; over a GSM/GPRS cellular network therefore many of the services (network service). PTT provides available for traditional voice calls direct voice communication. To (for example, voice mailbox) are connect, press the PTT key. not available for PTT You can use PTT to have a communication. conversation with one person or with a group of people having ■ Connect to the PTT compatible devices. When your service call is connected, the people you To connect to the PTT service, are calling do not have to answer select Menu > Push to talk > the phone. The participants should Switch PTT on. indicates the PTT confirm the reception of any connection. indicates that the communication where service is temporarily unavailable. appropriate, as there is no other The phone automatically tries to confirmation whether the reconnect to the service until you recipients have heard the call. disconnect from the PTT service. If To check availability and costs, and you have added channels to the to subscribe to the service, contact phone, you are automatically your network operator or service joined to the active channels, and provider. Roaming services may be if you have selected a contact, more limited than for normal calls. phonebook group or channel as Before you can use the PTT service, the default action for the PTT-key, you must define the required PTT then the name of the selected item is displayed in the standby mode.

To disconnect from the PTT service, depends on your network operator select Switch PTT off. or service provider and is only available for subscribed contacts. ■ Make and receive a , , or indicate that the PTT call contact is available, not logged into the PTT service, or unknown. Set the phone to use the indicates that the contact does loudspeaker or earpiece for PTT not want to be disturbed. You communication. When the cannot call the contact, but you earpiece is selected, you can use can send a callback request. the phone normally, by holding it to your ear. To subscribe a contact, select Options > Subscribe contact, or if Warning: Do not hold the one or more contacts are marked, device near your ear when select Subscribe marked. the loudspeaker is in use, because the volume may be extremely loud. Make a channel or a group call When connected to the PTT service, you can make or receive To make a call to a channel, select channel calls, group calls, or Channel list in the PTT menu, one-to-one calls. One-to-one calls scroll to the desired channel, and are calls you make to only one press the PTT key. person. To make a group call from Press and hold the PTT key the Contacts, the recipients must be entire time you are talking, and connected to the PTT service. hold the phone in front of you so Select Menu > Contacts > that you can see the display. When Groups, scroll to the desired you are finished, release the PTT group, and press the PTT key. key. Talking is allowed on a first- come, first-served basis. When Make a one-to-one call someone stops talking, the first To start a one-to-one call from the person to press the PTT key can list of contacts to which you added talk next. the PTT address, select Contacts To check the login status of your list. Scroll to a contact, and press contacts, select Menu > Push to the PTT key. talk > Contacts list. This service

You can also select the contact If you have set the phone to first from Contacts. notify you of one-to-one calls, To start a one-to-one call from the accept or reject the call. list of PTT channels, select If you press the PTT key to try to Channel list, and scroll to the respond to a call while another desired channel. Select Members, member is talking, you hear a tone, scroll to the desired contact, and and Queuing is displayed as long press the PTT key. as you press the PTT key. Press and To start a one-to-one call from the hold the PTT key, and wait for the list of callback requests you have other person to finish; then you received, select Callback inbox. can talk. Scroll to the desired contact, and press the PTT key. ■ Callback requests If you make a one-to-one call and Make a PTT call to multiple do not get a response, you can recipients send a request for the person to You can select multiple PTT call you back. contacts from the contact list. The recipients receive an incoming call Send a callback request and must accept the call to You can send a callback request in participate. the following ways: Select Menu > Push to talk > • To send a callback request from Contacts list, and mark the the contacts list in the Push to desired contacts. To make the call, talk menu, select Contacts list. press the PTT key. The contacts Scroll to a contact, and select who accept the call are shown. Options > Send callback. • To send a callback request from Receive a PTT call Contacts, search for the A short tone notifies you of an desired contact, select Details, incoming PTT call. Information scroll to the PTT address, and such as the channel name or the select Options > Send nickname (network service) of the callback. caller is displayed. • To send a callback request from the channel list in the Push to

talk menu, select Channel list, ■ Add a one-to-one and scroll to the desired contact channel. Select Members, You can save the names of persons scroll to the desired contact, to whom you often make and select Options > Send one-to-one calls in the following callback. ways: • To send a callback request from • To add a PTT address to a name the callback request list in the in Contacts, search for the Push to talk menu, select desired contact, and select Callback inbox. Scroll to a Details > Options > Add contact, and select Options > detail > Push to talk address. Send callback. • To add a contact to the PTT Respond to a callback contacts list, select Menu > request Push to talk > Contacts list > Options > Add contact. When you receive a callback • To add a contact from the request, Callback request received channel list, connect to the PTT is shown in the standby mode. service, select Channel list, and Select View. The list of contacts scroll to the desired channel. who have sent you callback Select Members, scroll to the requests is shown. member whose contact To make a one-to-one call, press information you want to save, the PTT key. and select Options. To add a To send a call request back to the new contact, select Save as. To sender, select Options > Send add a PTT address to a name in callback. Contacts, select Add to To delete the request, select contact. Delete. ■ To view the sender's PTT address, PTT channels select View. When you call a channel, all To save a new contact or to add members joined to the channel the PTT address to a contact, select hear the call simultaneously. Options > Save as or Add to There are three types of PTT contact. channels:

• Provisioned channel — A Receive an invitation permanent channel is created When you receive an invitation to by the service provider. a group, Channel invitation • Public channel — Every received: is displayed. channel member can invite 1. To view the contact who sent other persons. the invitation and the channel • Private channel — Only address if the group is not a persons who receive an private channel, select View. invitation from the channel 2. To add the channel to your creator can join in. phone, select Save. 3. To set the status for the Add a channel channel, select Active or To add a public or private channel, Inactive. select Menu > Push to talk > Add To reject the invitation, select channel, and edit the settings in View > Discard > Yes. the form fields: Channel status: — Select Active or ■ PTT settings Inactive. There are two kinds of PTT Nickname in channel: — Enter settings: settings for connecting your nickname for the channel. to the service and settings for use. Channel security: — Select Public You may receive the settings for channel or Private channel. connecting to the service from To send an invitation to the group, your network operator or service select Yes when the phone provider. See ”Configuration requests it. You can send the settings service” p. 11. You can invitation using a text message or enter the settings manually. See infrared. ”Configuration” p. 60. To add a channel by entering the To select the settings for channel address manually, select connecting to the service, select Menu > Push to talk > Add Menu > Push to talk > channel > Options > Edit address Configuration sett. and from the manually. Enter the channel following options: address provided by your service provider.

Configuration — to select a highlighted) to a contact, channel service provider, Default, or or group. Personal configuration for PTT Show my login status > Yes — to service. Only the configurations enable the sending of the login that support the PTT service are status shown. PTT status in startup > Yes > or Account — to select a PTT service Ask first — to set the phone to account in the active automatically connect to the PTT configuration settings service when you switch on the You can also select from the phone following options: Push to talk Push to talk when abroad — to user name, Default nickname, switch the PTT service on or off Push to talk password, Domain, when the phone is used outside of and Server address. the home network To edit the PTT settings for use, Send my PTT address > No — to select Menu > Push to talk > hide your PTT address from calls Push to talk settings, and from the following options: 1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls. To make but not receive one-to-one calls, select Off. The service provider may offer some services that override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify. PTT key default function is used to select the default action of the PTT-key. It can be set to opening the Contacts list or Channel list. It can also be set to directly create a PTT call from any state (unless any other contact, group or channel is

■ Alarm clock time on the display, even if the phone was switched off. To stop You can set the phone to alarm at the alarm, select Stop. If you let a desired time. Select Menu > the phone continue to sound the Organiser > Alarm clock. alarm for a minute or select To set the alarm, select Alarm Snooze, the alarm stops for the time, enter the alarm time, and time you set in Snooze time-out, select OK. To change the alarm and then resumes. time when the alarm time is set, If the alarm time is reached while select On. the device is switched off, the To set the phone to alert you on device switches itself on and starts selected days of the week, select sounding the alarm tone. If you Repeat alarm. select Stop, the device asks To select the alarm tone or set a whether you want to activate the radio channel as the alarm tone, device for calls. Select No to select Alarm tone. If you select the switch off the device or Yes to radio as an alarm tone, connect make and receive calls. Do not the headset to the phone. The select Yes when wireless phone phone uses the last channel you use may cause interference or listened to as the alarm, and the danger. alarm plays through the loudspeaker. If you remove the ■ Calendar headset or switch off the phone, Select Menu > Organiser > the default alarm tone replaces Calendar. the radio. The current day is indicated by a To set a snooze time-out, select frame in the month view. If there Snooze time-out and the time. are any notes set for the day, the day is in bold type, and the Stop the alarm beginning of the note is shown The phone sounds an alert tone, below the calendar. To view the and flashes Alarm! and the current

78 Copyright © 2006 Nokia. All rights reserved. Organizer day notes, select View. To view a Note alarm week, select Options > Week The phone beeps and displays the view. To delete all notes in the note. With a call note on the calendar, select the month or week display, to call the displayed view, and select Options > Delete number, press the call key. To stop all notes. the alarm and to view the note, Other options for the calendar day select View. To stop the alarm for view can make a note; delete, edit, 10 minutes, select Snooze. move, or repeat a note; copy a To stop the alarm without viewing note to another day; send a note the note, select Exit. with Bluetooth technology; or send a note to the calendar of ■ another compatible phone as a To-do list text message or multimedia To save a note for a task that you message. In Settings you can set must do, select Menu > the date, time, time zone, date or Organiser > To-do list. time format, date separator, To make a note if no note is added, default view, or the first day of the select Add; otherwise, select week. In Auto-delete notes you Options > Add. Write the note, can set the phone to delete old select Save and the priority, and notes automatically after a set the deadline and alarm for the specified time. note. To view a note, scroll to it, and Make a calendar note select View. Select Menu > Organiser > You can also select an option to Calendar. Scroll to the date you delete the selected note and want, select Options > Make a delete all the notes that you have note and one of the following note marked as done. You can sort the types: Meeting, Call, notes by priority or by deadline, Birthday, Memo, or send a note to another phone as a Reminder. Fill in the fields for the text message or a multimedia note. message, save a note as a calendar note, or access the calendar. While viewing a note, you can also select an option to edit the

Copyright © 2006 Nokia. All rights reserved. 79 Organizer deadline or priority for the note, or Select Menu > Organiser > mark the note as done. Calculator. When 0 is displayed, enter the first number in the ■ Notes calculation. Press # for a decimal point. Select Options > Add, To write and send notes, select Subtract, Multiply, Divide, Square, Menu > Organiser > Notes. Square root, or Change sign. Enter To make a note if no note is added, the second number. For a total, select Add; otherwise, select select Equals. To start a new Options > Make a note. Write the calculation, first select and hold note, and select Save. Clear. Other options include deleting and editing a note. While editing a Convert currency note, you can also exit the text Select Menu > Organiser > editor without saving the changes. Calculator. To save the exchange You can send the note to rate, select Options > Exchange compatible devices through rate. Select either of the displayed infrared, Bluetooth wireless options. Enter the exchange rate, technology, text message, or a press # for a decimal point, and multimedia message. If the note is select OK. The exchange rate too long to be sent as a text remains in the memory until you message, the phone asks you to replace it with another one. To delete the appropriate number of perform the currency conversion, characters from your note. enter the amount to be converted, and select Options > In domestic ■ Calculator or In foreign. The calculator in your phone adds, Note: When you change subtracts, multiplies, divides, base currency, you must calculates the square and the enter the new rates square root, and converts currency because all previously set values. exchange rates are Note: This calculator has cleared. limited accuracy and is designed for simple calculations.

■ Countdown timer demand on battery power and reduces the battery life. Select Menu > Organiser > Countdown timer. Enter the alarm Select Menu > Organiser > time in hours, minutes, and Stopwatch and from the following seconds, and select OK. If you options: wish, write your own note text Split timing — to take that is displayed when the time intermediate times. To start the expires. To start the countdown time observation, select Start. timer, select Start. To change the Select Split every time that you countdown time, select Change want to take an intermediate time. time. To stop the timer, select Stop To stop the time observation, timer. select Stop. If the alarm time is reached when To save the measured time, select the phone is in the standby mode, Save. the phone sounds a tone and To start the time observation flashes the note text if it is set or again, select Options > Start. The Countdown time up. To stop the new time is added to the previous alarm, press any key. If no key is time. To reset the time without pressed, the alarm automatically saving it, select Reset. stops within 30 seconds. To stop the alarm and delete the note text, To set the stopwatch timing in the select Exit. To restart the background, press the end key. countdown timer, select Restart. Lap timing — to take lap times. To set the stopwatch timing in the ■ Stopwatch background, press the end key. You can measure time, take Continue — to view the timing intermediate times, or take lap that you have set in the times using the stopwatch. During background timing, the other functions of the Show last — to view the most phone can be used. To set the recently measured time if the stopwatch timing in the stopwatch is not reset background, press the end key. View times or Delete times — to Using the stopwatch or allowing it view or delete the saved times to run in the background when using other features increases the

■ Games Applications > Options > Application settings. The microSD card of your phone may contain games. ■ Collection Launch a game Your phone software includes Select Menu > Applications > some Java applications. Games. Scroll to the desired game, and select Open, or press the call Launch an application key. Select Menu > Applications > For options related to a game, see Collection. Scroll to an ”Application options” p. 82. application, and select Open, or press the call key. Game downloads Select Menu > Applications > Application options Options > Downloads > Game Delete — to delete the application downloads. The list of available from the phone bookmarks is shown. See Details — to give additional ”Bookmarks” p. 87. information about the application Important: Only install Update version — to check if a and use applications and new version of the application is other software from available for download from Web sources that offer (network service) adequate security and Web page — to provide further protection against information or additional data for harmful software. the application from an Internet page (network service). It is only Game settings shown if an Internet address has To set sounds, lights, and shakes been provided with the for the game, select Menu > application.

Application access — to restrict download the applications to the application from accessing the your phone. network. Different categories are Your device may have some shown. Select in each category bookmarks loaded for sites not one of the available permissions. affiliated with Nokia. Nokia does not warrant or endorse these sites. Download an application If you choose to access them, you Your phone supports J2METM Java should take the same precautions, applications. Make sure that the for security or content, as you application is compatible with would with any Internet site. your phone before downloading it. Important: Only install ■ Presenter and use applications and The Presenter application is other software from compatible with Microsoft Office sources that offer PowerPoint and enables you to adequate security and control slide presentations, a protection against software DVD, an MP3 player, or harmful software. other PC applications remotely You can download new Java from your device. applications in different ways: To use applications other than • Select Menu > Applications > slide presentations and desktop Options > Downloads > mode, you must create a Application downloads, and corresponding custom profile on the list of available bookmarks the PC application. is shown. See ”Bookmarks” Before you can use the application p. 87. you must do the following: For the availability of different 1. Install the Nokia Presenter PC services, pricing, and tariffs, application on your PC. (This contact your service provider. component is included in the • Use the game download software package, but is also function. See ”Game available for download on the downloads” p. 82. Noka Web site.) • Use the Nokia Application 2. Launch and configure the PC Installer from Nokia PC Suite to component. Make sure that the

selected incoming Bluetooth To point things out on the slides, serial port (COM port) select Pointer to activate a small corresponds to the one defined black round marker, that you in the Bluetooth software control with the 4-way navigation settings on the Bluetooth key. Select Options > Slide list to device of your PC. For details, return to the slide list. Select refer to the PC component Options > Applications list to documentation and ”Set up a return to the list of applications. Bluetooth connection” p. 53. To control the mouse pointer (the 3. Open the slide presentation, or cursor) remotely from the phone, start the application you want select the desktop mode. After you to control remotely from your open the desktop, the phone phone. automatically controls your mouse Select Applications > pointer. To return to the list of Collection > Presenter > Connect applications, select Options > and the device you want to Applications list. connect to. To quit the Presenter, select When the Bluetooth Connection Options > Exit application?. Successful dialog appears on your PC screen, you must click on it to confirm the Bluetooth connection. The list of available application types is displayed. Select Open to access the desired application. Select Options > Settings to set the Font size for the speaker notes, and Timer (in minutes)to optimize the slide presentation time available. To save the settings, select Options > Back After you have select the slide presentation you browse or skip slides, or jump ahead, by using the 4-way navigation key. To view your speaker notes, select Notes.

You can access various mobile 2. Make a connection to the Internet services with your phone service. See ”Connect to a browser. service” p. 85. Important: Use only 3. Start browsing the pages of the services that you trust and service. See ”Browse pages” that offer adequate p. 86. security and protection 4. When you finish browsing, end against harmful software. the connection to the service. Check the availability of these To disconnect, see ”Options services, pricing, tariffs, and while browsing” p. 87. instructions with your service provider. ■ Set up browsing With the phone browser you can You may receive the configuration view the services that use wireless settings required for browsing as a markup language (WML) or configuration message from the extensible hypertext markup network operator or service language (XHTML) on their pages. provider that offers the service Appearance may vary due to that you want to use. See screen size. You may not be able to ”Configuration settings service” view all details of the Internet p. 11. You can also enter all the pages. configuration settings manually. See ”Configuration” p. 60. ■ Basic steps to access and use services ■ Connect to a service 1. Save the service settings that First, ensure that the correct are required to access the configuration settings of the service that you want to use. service that you want to use are See ”Set up browsing” p. 85. activated. 1. To select the settings for connecting to the service,

select Menu > Web > address of the service, and Settings > Configuration select OK. settings. 2. Select Configuration. Only the ■ Browse pages configurations that support After you make a connection to browsing service are shown. the service, you can start browsing Select a service provider, its pages. The function of the Default, or Personal phone keys may vary in different configuration for browsing. services. Follow the text guides on See ”Set up browsing” p. 85. the phone display. For more 3. Select Account and a browsing information, contact your service service account contained in provider. the active configuration If packet data is selected as the settings. data bearer, is shown on the 4. Select Display terminal top left of the display during window > Yes to perform browsing. If you receive a call or a manual user authentication for text message, or make a call intranet connections. during a packet data connection, Secondly, make a connection to is shown on the top right of the the service in one of the following display to indicate that the packet ways: data connection is suspended (on hold). After a call the phone tries • Select Menu > Web > Home; to reconnect the packet data or in the standby mode, press connection. and hold 0. • To select a bookmark of the Browse with phone keys service, select Menu > Web > Bookmarks. To browse through the page, scroll in any direction. • To select the last URL, select Menu > Web > Last web To select a highlighted item, press address. the call key, or select Select. • To enter the address of the To enter letters and numbers, press service, select Menu > Web > the 0 to 9 keys. To enter special Go to address. Enter the characters, press *.

Options while browsing name and a phone number from a Select from the following options: page. Home — to return to your start ■ page Bookmarks Shortcuts — to open a new list of You can save page addresses as options that are specific to the bookmarks in the phone memory. page. This option is only available 1. While browsing, select if the page contains shortcuts. Options > Bookmarks; or in Add bookmark — to save the page the standby mode, select as a bookmark Menu > Web > Bookmarks. Bookmarks — to access the list of 2. Scroll to a bookmark, and bookmarks. See ”Bookmarks” select it, or press the call key to p. 87. make a connection to the page associated with the bookmark. Page options — to show the list of options for the active page 3. Select Options to view, edit, delete, or send the bookmark; History — to get a list showing the to create a new bookmark; or last visited URLs to save the bookmark to a Other options — to show a list of folder. other options Your device may have some Reload — to reload and update the bookmarks loaded for sites not current page affiliated with Nokia. Nokia does Quit — to disconnect from a not warrant or endorse these sites. service If you choose to access them, you should take the same precautions, The service provider may also offer for security or content, as you other options. would with any Internet site. Direct calling Receive a bookmark The browser supports functions When you have received a that you can access while bookmark that is sent as a browsing. You can make a phone bookmark, 1 bookmark received is call, send DTMF tones while a displayed. To save the bookmark, voice call is in progress, and save a select Show > Save. To view or

Copyright © 2006 Nokia. All rights reserved. 87 Web delete the bookmark, select connection. For more information, Options > View or Delete. To see ”Browser security” p. 90. discard the bookmark directly Character encoding > Content after you have received the encoding — to select the encoding bookmark, select Exit > OK. for the browser page content ■ Character encoding > Unicode Appearance settings (UTF-8) web add. > On — to set While browsing, select Options > the phone to send a URL as a UTF- Other options > Appearance 8 encoding. You may need this settings, or in the standby mode, setting when you access a Web select Menu > Web > Settings > page created in foreign language. Appearance settings and from the Screen size > Full or Small — to following options: set the screen layout Text wrapping > On — to set the JavaScript > Enable — to enable text to continue on the next line the Java scripts on the display. If you select Off, the text is abbreviated. ■ Security settings Font size > Extra small, Small, or Medium — to set the font size Cookies Show images > No — to hide A cookie is data that a site saves in pictures on the page. This can the cache memory of your phone. speed up the browsing of pages Cookies are saved until you clear that contain a lot of pictures. the cache memory. See ”Cache Alerts > Alert for unsecure memory” p. 90. conn. > Yes — to set the phone to While browsing, select Options > alert when a secure connection Other options > Security > changes to an unsecure one during Cookie settings; or in the standby browsing mode, select Menu > Web > Alerts > Alert for unsecure Settings > Security settings > items > Yes — to set the phone to Cookies. To allow or prevent the alert when a secure page contains phone from receiving cookies, an unsecure item. These alerts do select Allow or Reject. not guarantee a secure

Scripts over secure message is moved to the Service connection inbox. To access the Service inbox later, select Menu > Web > You can select whether to allow Service inbox. the running of scripts from a secure page. The phone supports To access the Service inbox while WML scripts. browsing, select Options > Other options > Service inbox. Scroll to While browsing, to allow the the message you want, and to scripts, select Options > Other activate the browser and options > Security > WMLScript download the marked content, settings; or in the standby mode, select Retrieve. To display select Menu > Web > Settings > detailed information on the Security settings > WMLScripts in service notification or to delete sec. conn. > Allow. the message, select Options > Details or Delete. ■ Download settings To automatically save all Service inbox settings downloaded files in Gallery, select Select Menu > Web > Settings > Menu > Web > Settings > Service inbox settings. Downloading settings > Automatic saving > On. To set whether you want to receive service messages, select Service ■ Service inbox messages > On or Off. To set the phone to receive service The phone is able to receive service messages only from content messages (pushed messages) sent authors approved by the service by your service provider (network provider, select Message filter > service). Service messages are On. To view the list of the notifications (for example, news approved content authors, select headlines), and they may contain a Trusted channels. text message or an address of a service. To set the phone to automatically activate the browser from the To access the Service inbox in the standby mode when the phone has standby mode, when you have received a service message, select received a service message, select Automatic connection > On. If Show. If you select Exit, the you select Off, the phone activates

Copyright © 2006 Nokia. All rights reserved. 89 Web the browser only after you select and allows you to use a digital Retrieve when the phone has signature. The security module received a service message. may contain certificates as well as private and public keys. The ■ Cache memory certificates are saved in the security module by the service A cache is a memory location that provider. is used to store data temporarily. If you have tried to access or have To view or change the security accessed confidential information module settings, select Menu > requiring passwords, empty the Settings > Security > Security cache after each use. The module settings. information or services you have accessed is stored in the cache. Certificates To empty the cache while Important: Even if the use browsing, select Options > Other of certificates makes the options > Clear the cache; in the risks involved in remote standby mode, select Menu > connections and software Web > Clear the cache. installation considerably smaller, they must be used ■ Browser security correctly in order to benefit from increased Security features may be required security. The existence of for some services, such as online a certificate does not offer banking or shopping. For such any protection by itself; connections you need security the certificate manager certificates and possibly a security must contain correct, module, which may be available authentic, or trusted on your SIM card. For more certificates for increased information, contact your service security to be available. provider. Certificates have a restricted lifetime. If Security module Expired certificate or The security module improves Certificate not valid yet is security services for applications shown even if the requiring a browser connection, certificate should be valid, check that the current

date and time in your secures the data transmission device are correct. between the gateway and the Before changing any content server. certificate settings, you must make sure that you Digital signature really trust the owner of You can make digital signatures the certificate and that with your phone if your SIM card the certificate really has a security module. Using the belongs to the listed digital signature can be the same owner. as signing your name to a paper There are three kinds of bill, contract, or other document. certificates: server certificates, To make a digital signature, select authority certificates, and user a link on a page, for example, the certificates. You may receive these title of the book you want to buy certificates from your service and its price. The text to sign is provider. Authority certificates and shown, which may include the user certificates may also be saved amount and date. in the security module by the Check that the header text is Read service provider. and that the digital signature icon To view the list of the authority or is shown. user certificates downloaded into If the digital signature icon does your phone, select Menu > not appear, there is a security Settings > Security > Authority breach, and you should not enter certificates or User certificates. any personal data such as your is displayed during a signing PIN. connection, if the data To sign the text, read all of the text transmission between the phone first, and select Sign. and the content server is encrypted. The text may not fit within a single screen. Therefore, make sure to The security icon does not indicate scroll through and read all of the that the data transmission text before signing. between the gateway and the content server (or place where the Select the user certificate you requested resource is stored) is want to use. Enter the signing PIN secure. The service provider (see ”Access codes” p. 10), and

Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability, rates, and information on using SIM services, contact your SIM card vendor, for example, network operator, service provider, or other vendor. To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM serv. actions > Yes. Accessing these services may involve sending messages or making a phone call for which you may be charged.

You can send and receive e-mail, For availability and subscription to and access the Internet when your data services, contact your phone is connected to a network operator or service compatible PC through an IR, provider. Bluetooth wireless technology, or The use of HSCSD services USB data cable connection. You consumes the phone battery faster can use your phone with a variety than normal voice or data calls. of PC connectivity and data You may need to connect the communications applications. phone to a charger for the duration of data transfer. ■ Nokia PC Suite See ”Packet data settings” p. 55. With Nokia PC Suite you can synchronize contacts, calendar, ■ Data communication notes, and to-do notes between applications your phone and the compatible PC or a remote Internet server For information on using a data (network service). You may find communication application, refer more information and PC Suite on to the documentation provided the Nokia Web site at with it. www.nokia.com.hk/support. Making or answering phone calls during a computer connection is ■ EGPRS, HSCSD, CSD, not recommended, as it might and WCDMA disrupt the operation. For better performance during With your phone you can use the data calls, place the phone on a enhanced GPRS (EGPRS), general stationary surface with the keypad packet radio service (GPRS), circuit facing downward. Do not move switched data (GSM data) the phone by holding it in your services, high speed circuit hand during a data call. switched data (HSCSD), and WCDMA packet and circuit switched data services.

■ Charging and If the battery is completely discharging discharged, it may take a few minutes before the charging Your device is powered by a indicator appears on the display or rechargeable battery. The full before any calls can be made. performance of a new battery is achieved only after two or three Use the battery only for its complete charge and discharge intended purpose. Never use any cycles. The battery can be charged charger or battery that is and discharged hundreds of times, damaged. but it will eventually wear out. Do not short-circuit the battery. When the talk and standby times Accidental short-circuiting can are noticeably shorter than occur when a metallic object such normal, replace the battery. Use as a coin, clip, or pen causes direct only Nokia approved batteries, and connection of the positive (+) and recharge your battery only with negative (-) terminals of the Nokia approved chargers battery. (These look like metal designated for this device. strips on the battery.) This might If a replacement battery is being happen, for example, when you used for the first time or if the carry a spare battery in your battery has not been used for a pocket or purse. Short-circuiting prolonged period, it may be the terminals may damage the necessary to connect the charger battery or the connecting object. and then disconnect and Leaving the battery in hot or cold reconnect it to start the charging. places, such as in a closed car in Unplug the charger from the summer or winter conditions, will electrical plug and the device reduce the capacity and lifetime of when not in use. Do not leave fully the battery. Always try to keep the charged battery connected to a battery between 15°C and 25°C charger, since overcharging may (59°F and 77°F). A device with a shorten its lifetime. If left unused, hot or cold battery may not work a fully charged battery will lose its temporarily, even when the charge over time. battery is fully charged. Battery

Copyright © 2006 Nokia. All rights reserved. 95 Battery information performance is particularly limited return the battery to the place of in temperatures well below purchase. freezing. Authenticate hologram Do not dispose of batteries in a fire 1. When as they may explode. Batteries you look may also explode if damaged. at the Dispose of batteries according to hologram local regulations. Please recycle on the when possible. Do not dispose as label, you household waste. should see the Nokia connecting ■ Nokia battery hands symbol from one angle authentication and the Nokia Original guidelines Enhancements logo when Always use original Nokia looking from another angle. batteries for your safety. To check 2. When you that you are getting an original angle the Nokia battery, purchase it from an hologram authorised Nokia dealer, and left, right, inspect the hologram label using down and the following steps: up, you Successful completion of the steps should is not a total assurance of the see 1, 2, 3 and 4 dots on each authenticity of the battery. If you side respectively. have any reason to believe that What if your battery is not your battery is not an authentic, authentic? original Nokia battery, you should If you cannot confirm that your refrain from using it, and take it to Nokia battery with the hologram the nearest authorised Nokia on the label is an authentic Nokia service point or dealer for battery, please do not use the assistance. Your authorised Nokia battery. Take it to the nearest service point or dealer will inspect authorised Nokia service point or the battery for authenticity. If dealer for assistance. The use of a authenticity cannot be verified, battery that is not approved by the manufacturer may be dangerous

96 Copyright © 2006 Nokia. All rights reserved. Battery information and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery.

A new Use only batteries, chargers and extensive enhancements approved by the range of phone manufacturer. The use of enhancements any other types may invalidate any is available for approval or warranty applying to your phone. Select the the phone, and may be dangerous. enhancements which accommodate your specific ■ Battery communication needs. For the compatible enhancements related to this mobile phone, Type Tech Talktime* Standby* please visit www.nokia.com.hk. BP- Stan- up to 4 up to 340 For availability of the 6M dard hours hours(GSM), enhancements, please check with bat- (GSM), up up to 340 your local dealer. tery to 3 hours hours (WCDMA) A few practical rules about (WCDMA) accessories and enhancements. * Variation in operation times may • Keep all accessories and occur depending on SIM card, enhancements out of the reach network and usage settings, usage of small children. style and environments. Use of FM • When you disconnect the radio and integrated hands-free power cord of any accessory or will affect talktime and standby. enhancement, grasp and pull the plug, not the cord. • Check regularly that enhancements installed in a vehicle are mounted and are operating properly. • Installation of any complex car enhancements must be made by qualified personnel only.

Your device is a product of superior • Do not use harsh chemicals, design and craftsmanship and should cleaning solvents, or strong be treated with care. The suggestions detergents to clean the device. below will help you protect your • Do not paint the device. Paint can warranty coverage. clog the moving parts and prevent • Keep the device dry. Precipitation, proper operation. humidity and all types of liquids or • Use a soft, clean, dry cloth to clean moisture can contain minerals that any lenses (such as camera, will corrode electronic circuits. If proximity sensor, and light sensor your device does get wet, remove lenses). the battery and allow the device to • Use only the supplied or an dry completely before replacing it. approved replacement antenna. • Do not use or store the device in Unauthorized antennas, dusty, dirty areas. Its moving parts modifications, or attachments and electronic components can be could damage the device and may damaged. violate regulations governing radio • Do not store the device in hot devices. areas. High temperatures can • Use chargers indoors. shorten the life of electronic • Always create a backup of data you devices, damage batteries, and want to keep (such as contacts and warp or melt certain plastics. calendar notes) before sending • Do not store the device in cold your device to a service facility. areas. When the device returns to All of the above suggestions apply its normal temperature, moisture equally to your device, battery, charger, can form inside the device and or any enhancement. If any device is damage electronic circuit boards. not working properly, take it to the • Do not attempt to open the device nearest authorized service facility for other than as instructed in this service. guide. • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

Your device and its enhancements ■ Medical devices may contain small parts. Keep Operation of any radio transmitting them out of the reach of small equipment, including wireless phones, children. may interfere with the functionality of inadequately protected medical ■ Operating environment devices. Consult a physician or the manufacturer of the medical device to Remember to follow any special determine if they are adequately regulations in force in any area, and always switch off your device when its shielded from external RF energy or if you have any questions. Switch off use is prohibited or when it may cause your device in health care facilities interference or danger. Use the device only in its normal operating positions. when any regulations posted in these areas instruct you to do so. Hospitals or This device meets RF exposure health care facilities may be using guidelines when used either in the normal use position against the ear or equipment that could be sensitive to external RF energy. when positioned at least 2.2 centimeters (7/8 inches) from the body. Pacemakers When a carry case, belt clip or holder is Pacemaker manufacturers recommend used for body-worn operation, it that a minimum separation of should not contain metal and should position the device the above-stated 15.3 centimeters (6 inches) be maintained between a wireless phone distance from your body. To transmit and a pacemaker to avoid potential data files or messages, this device requires a quality connection to the interference with the pacemaker. These recommendations are consistent with network. In some cases, transmission the independent research by and of data files or messages may be delayed until such a connection is recommendations of Wireless Technology Research. Persons with available. Ensure the above separation pacemakers should do the following: distance instructions are followed until the transmission is completed. • Always keep the device more than Parts of the device are magnetic. 15.3 centimeters (6 inches) from the pacemaker Metallic materials may be attracted to the device. Do not place credit cards or • Not carry the device in a breast other magnetic storage media near the pocket device, because information stored on them may be erased.

• Hold the device to the ear opposite including installed or portable wireless the pacemaker to minimize the equipment in the area over the air bag potential for interference. or in the air bag deployment area. If in- If you suspect interference, switch off vehicle wireless equipment is your device, and move the device away. improperly installed and the air bag inflates, serious injury could result. Hearing aids Using your device while flying in Some digital wireless devices may aircraft is prohibited. Switch off your interfere with some hearing aids. If device before boarding an aircraft. The interference occurs, consult your use of wireless teledevices in an service provider. aircraft may be dangerous to the operation of the aircraft, disrupt the ■ Vehicles wireless telephone network, and may RF signals may affect improperly be illegal. installed or inadequately shielded electronic systems in motor vehicles ■ Potentially explosive such as electronic fuel injection environments systems, electronic antiskid (antilock) Switch off your device when in any braking systems, electronic speed area with a potentially explosive control systems, and air bag systems. atmosphere and obey all signs and For more information, check with the instructions. Potentially explosive manufacturer or its representative of atmospheres include areas where you your vehicle or any equipment that has would normally be advised to turn off been added. your vehicle engine. Sparks in such Only qualified personnel should service areas could cause an explosion or fire the device, or install the device in a resulting in bodily injury or even death. vehicle. Faulty installation or service Switch off the device at refueling may be dangerous and may invalidate points such as near gas pumps at any warranty that may apply to the service stations. Observe restrictions device. Check regularly that all on the use of radio equipment in fuel wireless device equipment in your depots, storage, and distribution areas; vehicle is mounted and operating chemical plants; or where blasting properly. Do not store or carry operations are in progress. Areas with flammable liquids, gases, or explosive a potentially explosive atmosphere are materials in the same compartment as often but not always clearly marked. the device, its parts, or enhancements. They include below deck on boats, For vehicles equipped with an air bag, chemical transfer or storage facilities, remember that air bags inflate with vehicles using liquefied petroleum gas great force. Do not place objects, (such as propane or butane), and areas where the air contains chemicals or

Copyright © 2006 Nokia. All rights reserved. 101 Additional safety information particles such as grain, dust, or metal device may be the only means of powders. communication at the scene of an accident. Do not end the call until ■ Emergency calls given permission to do so. Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.

To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device. 2. Press the end key as many times as needed to clear the display and ready the device for calls. 3. Enter the official emergency number for your present location. Emergency numbers vary by location. 4. Press the call key. If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information. When making an emergency call, give all the necessary information as accurately as possible. Your wireless

■ Certification information the power required to reach the (SAR) network. In general, the closer you are THIS DEVICE MEETS INTERNATIONAL to a base station, the lower the power GUIDELINES FOR EXPOSURE TO RADIO output of the device. WAVES The highest SAR value for this device Your mobile device is a radio when tested for use at the ear is transmitter and receiver. It is designed 0.80W/Kg. and manufactured not to exceed the SAR values may vary depending on limits for exposure to radio frequency national reporting and testing (RF) recommended by international requirements and the network band. guidelines (ICNIRP). These limits are Use of device accessories and part of comprehensive guidelines and enhancements may result in different establish permitted levels of RF energy SAR values. Additional SAR for the general population. The information may be provided under guidelines were developed by product information at independent scientific organisations www.nokia.com. through periodic and thorough * The SAR limit for mobile devices used evaluation of scientific studies. The by the public is 2.0 W/kg averaged over guidelines include a substantial safety ten grams of body tissue. The margin designed to assure the safety of guidelines incorporate a substantial all persons, regardless of age and margin of safety to give additional health. protection for the public and to The exposure standard for mobile account for any variations in devices employs a unit of measurements. SAR values may vary measurement known as the Specific depending on national reporting Absorption Rate, or SAR. The SAR limit requirements and the network band. stated in the international guidelines is For SAR information in other regions 2.0 watts/kilogram (W/kg)*. Tests for please look under product information SAR are conducted using standard at www.nokia.com. operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only

A D access codes 10 data communication 94 activation keys 62 data transfer 56 active standby 49, 51 date settings 50 alarm clock 78 dialed numbers 47 applications 82 digital rights management 61 audio messages 35 digital signature 91 download B applications 83 games 82 barring password 10 protected files 61 Battery 98 battery 95 installation 13 E Battery information e-mail application 36 type 98 emergency calls 102 Bluetooth 52 end key 18 Bluetooth settings 53 ending a call 24 bookmarks 87 enhancements settings 59 browser 85 equalizer 71 browser security 88 business cards 44 F flash messages 35 C flight mode 48 cache memory 90 flight query 59 calculator 80 FM radio 68 calendar 78 folders 35 call key 18 call settings 58 G call waiting 24 calls 47 gallery 64 camera 65 games 82 camera key 18 Genuine Enhancements 98 camera settings 66 groups 45 certificates 90 charge level 19 I charger connector 18 image size (multimedia) 41 charging 95 indicators 21 clock settings 50 configuration 60 info messages 39 infrared 54 contacts 43 IR port 18 cookies 88 copyright protection 61 countdown timer 81

K PTT key 18 PUK code 10 keyguard 22 Push to talk. See PTT keypad lock 22 L R radio 68 lock the keypad 22 received calls 47 log 47 restore factory settings 62 ringing tones 24, 48 M maintenance 99 S media player 66 safety 7, 100 memory card 14, 64 emergency calls 102 memory card slot 18 explosive environments 101 message center number 30 hearing aids 101 message counter 47 medical devices 100 message templates 35 pacemakers 100 missed calls 47 vehicles 101 multimedia messages 32 screen saver 50 music player 67 security code 10 mute 24 security settings 60 my numbers 46 selection keys 18 service commands 39 N settings clock 50 navigation key 18 date 50 network 8 notes 80 time 50 shortcuts 20 signal strength 19 O SIM card 13 operator logo 50 SIM messages 31 organizer 78 SMS e-mail 31 special characters 28 speed dialing 23, 45 P stopwatch 81 packet data 54, 94 streaming service 66 PC Suite 94 switch on and off 16 permissions for a protected file 62 synchronize 57 personalize 48, 49 from PC 57 phone settings 58 from server 57 PIN code 10 plug and play service 16 T power key 18 power saver 50 templates 31 predictive text input 27 themes 48 profiles 48 time settings 50 progressive download 66 to-do list 79 PTT 72 traditional text input 28

U unlock keypad 22 USB data cable 57 V vibrating alert 49 voice commands 52 voice dialing 23 voice messages 39 voice recorder 70 volume keys 18 W wallpaper 48, 49 Web 85 writing language 27