Accel Ignition Catalog
Total Page:16
File Type:pdf, Size:1020Kb
cover 11/4/98 11:26 AM Page 2 cover 11/4/98 2:52 PM Page 3 THE FIRST NAME IN ACCELERATION standards to exceed your expectations.We also manufacture our own ignition systems and fuel For 30 years, ACCEL has been the leader in injection ECUs in our ISO 9001 certified facilities. performance spark plug wire sets, ignition systems, and other performance parts designed Aftermarket Engine Management was pioneered to increase the horsepower and efficiency of by ACCEL/DFI. Our commitment to pro- your vehicle. New product development at grammable fuel injection has led to the develop- ACCEL is extremely important. As a result, ment of a network of over 100 EMIC (Engine we are introducing new wire sets, coils, Engine Management Installation Centers) whose purpose Management products, starters, and a variety is to install and calibrate ACCEL/DFI fuel injection of other performance products to increase systems on your vehicle in order to make it easier the horsepower and efficiency of your vehicle. for you to enjoy your ACCEL/DFI Engine Additionally, we have been improving the look Management system. and design of our packaging and advertising. ACCEL continues to post the highest racing Performance spark plug wire sets have long been contingency of any performance ignition and fuel associated with ACCEL.We are the largest after- management company.Thanks for your continuing market performance spark plug wire support of ACCEL Performance Products. company.We not only engineer and design our spark plug wire sets, but we also manufacture them (which many other aftermarket companies do not). Additionally, our manufacturing plant is ISO 9001 certified, meaning you can be assured that it is produced to the highest quality Shown on the cover is the ACCEL SuperRam, a high performance, tuned-port fuel injection system that provides more horsepower and torque than OEM systems. It supports power up to 6500 RPM while improving overall vehicle performance — driveability, throttle response and fuel economy. See page 231 for complete application information. cover.qxp 11/16/98 9:08 AM Page 4 ® Performance Group The Mr. Gasket Performance Group offers a wide variety of Performance and Custom products, marketed under many well- known brand names including ACCEL, Lakewood Industries,Industries, Hays Hays Clutches, Hurst Performance and Mallory Ignition. MR. GASKET Mr. Gasket markets a wide variety of performance and custom products including gaskets, fasteners, chrome plated dress-up accessories, engine, carburetor and fuel system components, electric fans and cooling system accessories, and a wide range of related products. ACCEL ACCEL manufactures a wide range of performance ignition products including digital ignition systems, coils, ignition wires, spark plugs, fuel injection systems, components, and a complete line of caps, rotors and ignition parts. LAKEWOOD INDUSTRIES Lakewood Industries makes safety and suspension products, including hydroformed bellhousings, traction bars, drag shocks and related accessories. HAYS CLUTCHES Hays Clutches products include performance and racing pressure plates, discs, flywheels,flywheels, kits kits andand accessories.accessories. Hays Hays alsoalso hashas aa completecomplete lineline ofof custom-builtcustom-built specialtyspecialty clutches for drag racing and tractor-pulling applications. HURST Hurst Performance is the leading manufacturer of performance and racing shifters, which includes the legendarylegendary Competition/PlusCompetition/Plus andand thethe Billet/PlusBillet/Plus manualmanual shifters,shifters, and and a complete line of automatic shifters including the Quarter Stick and Pro-Matic 2. MALLORY IGNITION Mallory Ignition manufacturers a complete line of performance and racing ignition systems including distributors, magnetos, ignition wire, systems, and a complete line of caps, rotors and ignition parts. ERSON CAMS Erson Cams manufacture a wide variety of performance and racing camshafts, roller rocker arms and valve train components. ® ® ® LOCAL DEALER To find your local Mr. Gasket Performance Group dealer, call 1-800-542-2235 or look in the Yellow Pages under Automobile - Performance, Racing & Sports Car Equipment. INTERNETINTERNET The Mr. Gasket Performance Group has an extensive internet presence, which includes new product listings, product catalogs, consumer events, race schedules, tech tips, and a whole lot more. Check out the Mr. Gasket web site at www.mrgasket.com today! 300+ 11/3/98 2:43 PM Page 1 CONTENTS 300+ AND 200+ IGNITION SYSTEMS, KITS AND ACCESSORIES 2-8 WIRE SETS, APPLICATIONS AND ACCESSORIES 9-76 DISTRIBUTORS AND ACCESSORIES 77-84 SPARK PLUGS 85-122 COILS AND IGNITION TUNE-UP PARTS 123-194 ALTERNATORS, STARTERS AND ACCESSORIES 195-200 POWER FILTERS 201-226 DFI ENGINE MANAGEMENT SYSTEMS AND ACCESSORIES 227-260 INDEX 261-272 300+ 11/3/98 2:43 PM Page 2 RACING COILS improved PROFESSIONAL DRAG RACE II CD 140010 COIL IMPROVED - HIGHER ENERGY, LONGER ENDURANCE Re-engineered for extended use and ultra high output. This coil is capable of delivering over IGNITION SYSTEMS IGNITION SYSTEMS IGNITION SYSTEMS 1 full amp to the spark plugs. Design to work with CD racing ignition systems only.The unique patent pending core design and ultra low resistance heavy gauge windings have been designed for optimal performance with a Mallory, Crane, Holley or MSD capacitive discharge racing ignition system. Special high temperature, high density epoxy encapsulation resists severe shock and harsh vibration while providing maximum thermal conductivity. The light weight anodized extruded aluminum housing provides maximum cooling. SAE male tower with three high voltage dams provides extended protection from arcing. Can be mounted in any orientation and comes complete with a sealed weatherproof primary leads and connector. This coil is effective to over 12,000 RPM. SPECIFICATIONS Tested with Mallory HyFire VII ignition Primary Resistance 0.09 Ohms Secondary Resistance 0.48 Ohms Turns Ratio 170 : 1 Maximum Voltage 50,000 volts Peak Current 1,200 mA Spark Duration 170 µS Professional Drag Race II CD coil . .140010 See page 77 for ACCEL distributor application and pages 128-139 for additional coils. Coil resistance specification shown are nominal +/- 10% 2 300+ 11/3/98 2:43 PM Page 3 RACING COILS new HEAVY DUTY CD ONLY E-CORE SUPER COIL Professional continuous use racing coil specifi- cally design to work with CD ignition systems only. High energy, heavy gauge windings designed especially for optimum performance with an ACCEL, Mallory, Crane, Holley or SYSTEMS IGNITION SYSTEMS IGNITION SYSTEMS IGNITION MSD capacitive discharge ignition system. E-core design minimizes inductance losses and maximizes energy output. Special high temperature epoxy resists shock and vibration 140019 and provides excellent thermal conductivity. The extruded aluminum heat sink provides maximum cooling to ensure long life. SAE male tower offers greater coil wire retention and protection from arcing. Comes complete with insulated primary wire connector and universal ACCEL 8.8mm 300+ Race Wire coil lead and mounting hardware kit. This coil is effective to over 10,000 RPM. SPECIFICATIONS Tested with ACCEL 300+ Ignition Primary Resistance 0.2 Ohms Secondary Resistance 3.6 k Ohms Turns Ratio 95 : 1 Maximum Voltage 48,000 volts Peak Current 300 mA Spark Duration 360 µS Heavy Duty CD only E-core Super Coil . .140019 SHOCK / VIBRATION MOUNT KIT • Recommended for racing applications with severe shock and vibration conditions. • Four 1/4-20 studs impregnated in high absorption rubber cushions provide effective vibration isolation to protect valuable racing electronics. • Complete with hex nuts and lockwashers. 49012 Universal-Fit . .49012 See page 77 for ACCEL distributor application and pages 128-139 for additional coils. Coil resistance specification shown are nominal +/- 10% 3 300+ 11/3/98 2:43 PM Page 4 RACING COILS HEAVY DUTY ELECTRONIC / CD TYPE E-CORE SUPER COIL IGNITION SYSTEMS IGNITION SYSTEMS IGNITION SYSTEMS High energy heavy gauge windings deliver unmatched performance. Designed to work with both breakerless electronic ignition systems or ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition systems. 140009 E-core design minimizes inductance losses and maximizes energy output. Special high temperature epoxy resists shock and vibration and provides excellent thermal conductivity. The extruded aluminum heat sink provides maximum cooling to ensure long life. SAE male tower offers greater coil wire retention and protection from arcing. Comes complete with insulated primary wire connector and universal ACCEL 8.8mm Spiral coil lead and mounting hardware kit. SPECIFICATIONS Tested with ACCEL 300+ Ignition Primary Resistance 1.3 Ohms Secondary Resistance 7.3 k Ohms Turns Ratio 100 : 1 Maximum Voltage 48,000 volts Peak Current 220 mA Spark Duration 300 µS Heavy Duty Electronic /CD type E-core Super Coil . .140009 See page 77 for ACCEL distributor application and pages 128-139 for additional coils. Coil resistance specification shown are nominal +/- 10% 4 300+ 11/3/98 2:43 PM Page 5 IGNITION SYSTEMS IGNITION SYSTEMS IGNITION SYSTEMS IGNITION DARE TO COMPARE The ACCEL 300+ Ignition has the lowest current draw, most spark duration, high- 49320 est energy output, highest energy into the coil, and is the smallest and lightest system around. Each 300+ System comes with weatherpack plug-in connectors for easy, trouble-free installation. Kits are available for a variety of factory fit applications with custom fit direct plug-in harnesses