© the Dezac Group Ltd 2014 © the Dezac Group Ltd 2014
Total Page:16
File Type:pdf, Size:1020Kb
© The Dezacuser Group guide Ltd 2014 © The Dezac Group Ltd 2014 © The Dezac Group Ltd 2014 WARNINGS • Please read all instructions thoroughly before using the ©product The and Dezac retain for future Group reference. Ltd 2014 • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in ©a safeThe way and Dezac understand the Group hazards involved. Ltd Children 2014 shall not play with the appliance. Cleaning and maintenance shall not be made by children without supervision. • This appliance is only to be used with the mains adapter ©supplied. The Dezac Group Ltd 2014 • This appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance. WARNINGS • If any part of the mains adapter or cord are damaged, discontinue use. ©• Not The suitable forDezac Afro-Caribbean, Group black skin complexions Ltd 2014 or for Grey Hair. See “Skin Types and Power Level Guide” section. • Laser hair removal should not cause discomfort, you may feel individual hairs being treated, which is like a mild pin prick, ©and The a slight warmingDezac of the area. Group Ltd 2014 • If you feel any discomfort or soreness the setting may be too high. • Inbuilt safety features protect the eye being exposed to the laser, ©however, The never Dezac aim the unit atGroup or near eyes. Ltd 2014 3 WARNINGS • Do NOT use near flammable materials. • Reflection Hazard: Please remove all jewellery in the vicinity ©of Thethe treatment Dezac area before use.Group Ltd 2014 • Do not treat the same hair repeatedly in any one session. • Do not use after drinking alcohol or if you are feeling unwell ©or The fatigued. Dezac Group Ltd 2014 • Do not treat the following areas: tattoos, permanent make-up, pimples, warts, hair on black spots or moles, dark freckles, skin disease, birth marks, burns, lips, nipples, genital or anal areas, ©eczema, The eyelashes, Dezac eyebrows, Group near the eyes, nasalLtd or ear2014 hair. 4 WARNINGS • This is a sensitive laser scanning product. Care should be taken to avoid damage to the mechanism in the unit. ©• Do The NOT dismantle Dezac or repair. IfGroup you have any problems Ltd using2014 the product, contact our Customer Care Department. • Misuse of the unit can cause harm. ©• Do The NOT override Dezac any safety featuresGroup or open theLtd unit. 2014 • Keep unit away from strong electromagnetic fields and magnets during use. © The Dezac Group Ltd 2014 5 KNOW YOUR YES LASER 1 Power level increase button (+) 2 Power level decrease button (-) 3 Treatment button $ 7 4 Enable button © The5 Mode Dezac button Group Ltd 2014 6 Security key £ @ ! 0 9 8 © The1 Dezac Group Ltd 2014 2 3 6 5 4 7 Power levels 1-5 @ Security code sequence 8 Skin colour unsuitable £ Multiple hair mode © The Dezac Group9 ‘OK tick’ Ltd$ Single 2014 hair mode 0 Audio/Mute ! Error 6 ) & * ©( The Dezac Group Ltd 2014 & Touch pins © * TheLaser aperture Dezac Group Ltd 2014 ( Identification guide ) White skin detect and treatment light © The Dezac Group Ltd 2014 ©“ SayThe goodbye Dezac to Group Ltd 2014 shaving, waxing and epilation… © TheYES! Dezac Group“ Ltd 2014 © The Dezac Group Ltd 2014 8 THE SCIENCE LASER TECHNOLOGY Yes Laser hair removal works by sending a laser beam to the hair follicle with enough energy to permanently disable the root without affecting the surrounding area. The result is permanent hair © Thereduction. SimpleDezac to use, laser hair removal Group is suitable for unwanted faceLtd or body hair. 2014 Skin and hair contains a natural pigment called melanin. The level of melanin in your skin is the primary determinant of your skin colour, and is responsible for causing skin to tan during sun exposure. Both skin and hair follicles contain different concentrations of melanin. Lasers work by delivering an intense beam of light made up of a single wavelength. Yes Laser operates at a ©wavelength The that selectively Dezac targets the melanin in the hairGroup follicle, causing the hair follicleLtd to absorb 2014 the laser energy. The laser energy absorbed results in the rapid heating of the hair follicle. This heat destroys the cells responsible for hair growth. If adequate heating is achieved, the follicle is permanently disabled resulting in permanent hair reduction. The skin remains unaffected as it is essentially transparent to light in this wavelength range. It is only possible to treat a hair follicle when there is a hair present and the best results are achieved when the hair is actively growing. For permanent hair reduction six treatments are recommended over a six month period. ©Occasional The touch up treatments Dezac may be required for stubbornGroup hairs. Ltd 2014 9 What you should expect to feel? You may feel individual hairs being treated, which is like a mild pin prick, and a slight warming of ©the area The being treated. However,Dezac Group Ltd 2014 most people don’t feel anything. © The Dezac Group Ltd 2014 © The Dezac Group Ltd 2014 10 Who should not use Yes Laser? Laser hair treatment is not suitable for the following skin tones or hair types: • Afro-Caribbean or black skin complexions – the concentration ©of melaninThe in the skin isDezac too high Group Ltd 2014 • White or grey hair – insufficient melanin present in the hair. The table on the following page can be used to establish whether laser hair removal is suitable, and if so, which level should be used. © The Dezac Group Ltd 2014 © The Dezac Group Ltd 2014 11 SKIN TYPES AND POWER LEVEL GUIDE Skin Colour Tanning History Maximum Power level ©Very fair,The “transparent” DezacAlways burns, never tans Group Ltd 2014 Subject to patch test all 5 power Fair Always burns levels can be used Fair to light olive Burns mildly © The DezacRarely burns, GroupSubject Ltdto patch test all2014 power Olive/Tanned tans with ease levels 1, 2 and 3 can be used Dark brown Very rarely burns © The Dezac GroupNOT suitable Ltd for Laser treatment2014 Black Never burns 12 GETTING STARTED PATCH TEST ✓ © The 24Dezac hours before treatment checkGroup for any reaction by treatingLtd a 2014 small area first. The + and - buttons increase or reduce power levels. Treat several areas on each power level up to the maximum power level for your skin type (see table). If you feel any discomfort, the previous lower power level is the maximum power level you should use. © The ADezac slight redness may occur, Group but not always, within anLtd hour of 2014 treatment. This localised redness is quite normal. However, if any redness remains after 24 hours this would indicate the power level selected was too high for your skin type. Use the next power level down during treatment. NOTE: Skin colour varies on different areas of the body - you may find that you need different power level settings for different © The areas.Dezac Each area should be Grouptested for the appropriate maximumLtd 2014 power level. 13 How should I prepare my skin? Laser hair removal does not require any special skin preparations, although you should always ensure your skin is clean. Laser hair removal is most effective on pale skin so we recommend avoiding sunbathing, sun beds and fake tanning if © The Dezacpossible. Group Ltd 2014 How should I prepare the hairs? Shave the areas to be treated. This ensures the laser goes directly to the hair root and avoids hair burning on the surface. What areas can I treat? © The Dezac Most body hair canGroup be treated using Laser HairLtd Removal - the2014 most common areas are the face, underarms, legs, chest, back and bikini line. We do NOT recommend using Yes Laser on eyebrows. Can I use laser hair removal on sensitive skin? Yes, the laser reacts with the hair, so the surrounding skin will © The Dezac not beGroup affected. Ltd 2014 14 SECURITY FEATURES Security key The key allows the unit to be safely locked when not in use. OFF ON Insert the security key and unlock by turning clockwise so ©that when The the security key Dezac is removed, the arrow lines upGroup Ltd 2014 with the green dot. Security code sequence ©A securityThe code sequenceDezac is required toGroup use the unit: Ltd 2014 1 Power level increase button (+) 2 Mode button 3 Power level decrease button (-) ©4 The Mode button Dezac Group Ltd 2014 To change the security code sequence, see page 28. 15 SECURITY FEATURES When the security code sequence is correctly entered, the OK tick and the multiple hair mode symbols will display. The unit will be on power level 1 and the enable button will flash. The lowest power level indicator light will also illuminate. Note: The unit will go in to ‘lockout’ if the code is incorrectly entered. Turn the security key off, wait a ©few secondsThe and then turnDezac the key back on. Re-enter Group the correct security Ltdcode. 2014 © The Dezac Group Ltd 2014 © The Dezac Group Ltd 2014 16 TREATMENT MODES The treatment modes sequentially target single hairs in each treatment. ©scan The mode - multiple Dezac hair Groupsingle hair Ltd mode - single 2014 hair treatment treatment area area indentation indentation mark © The Dezac Group Ltd 2014mark Overlap by a third A small indentation mark will be left by pressing the The single hair mode treats a small area in unit down on the skin. Overlapping the indentation the centre of the indentation guide making mark slightly with each treatment will ensure effective it ideal for individual, problem hairs. ©coverage The of the treatment Dezac area.