Greenteq Door Hardware Q04 EDITION 2013

greenteQ Door hardware Q04 EDITION 2013

1 Always at your side - the VBH Enhanced Service Package

More products. More brands. More choice.

Simply everything you need to Everything simple, from the very first The expert brand for window and door manufacture and install windows and conversation through to everyday contact, hardware is always there for you. We are doors is available from VBH. from good, old fashioned face-to-face with you on the road to success. Benefit By 'everything'we mean that our products meetings to the use of modern from our efficient working practices and deliver everything you would expect in communications. At VBH, the people are profit from our staff's expert knowledge. terms of quality. This means you have there to help you, going about our work in Put simply, you can expectagood deal access to the most comprehensive, and a helpful and friendly way. Our modern more from us than from ordinary suppliers. consistently high quality range in the communication tools are designed for Rely on the VBH Enhanced Service sector. maximum efficiency and reliability,so that Package-at any time. you can concentrate on the essentials: Your customers.

2 VBH Multiservice package We accept no liability for printing errors. 11.04.2013 © VBH CONTENT

LEVER HANDLE SETS, PULL HANDLES AND LEVER HANDLE SETS FOR FRAMED DOORS

Lever handle sets Stainless steel 4 - 11 Pull handles Stainless steel 22 - 28 Lever handles Stainless steel 12 Pull handle systems Stainless steel 29 - 30 Security rosettes Stainless steel 13 - 14 Lever handle sets framed doors Stainless steel 31 - 33 Security rosettes Aluminium 15 Drilling jig set 34 Lever handles framed doors Aluminium 16 Lever handle sets framed doors Aluminium 35 - 40 Sliding rosettes framed doors Aluminium 17 Drilling jig set 41 Lever handles Stainless steel 18 - 19 Sliding rosettes Stainless steel 20 - 21

MORTISE LOCKS, MULTI-POINT LOCKS AND PROFILE CYLINDERS

Mortise locks 42 - 44 Profile cylinder keyed different 50 - 52 Accessories: Middle locking plate 45 Profile cylinder keyed alike No. 1 53 - 55 Multi-points locks 46 - 48 Profile cylinder keyed alike No. 2 56 - 58 Accessories: Additional striking plate 47 Profile cylinder keyed alike No. 3 59 - 61 Accessories: Middle locking plate 49 Profile cylinder keyed alike No. 4 62 - 63 Profile cylinder keyed alike No. 5 64 - 65 Profile cylinder WC 66 Escutcheon 66 - 67

FRONT DOOR SEALS, DOOR HINGES AND SUPPLEMENTARY RANGE

Front door seal 68 Door knockers 75 - 76 Door hinge TB 100.ZD.K 69 Door viewer 76 Accessories: Set of plastic accessories, 70 Signs 77 - 78 packer, fastening set, drilling jig 71 Floor doorstop 78 Door hinge TB 120.ZD.K 72 Wall mounted doorstop 78 Accessories: Set of plastic accessories, 73 House numbers 79 packer, fastening set, drilling jig, telescopic bar 74 Weldable corner connector 79 - 81 Threshold systems 82

INFORMATION

Subject to change reserved. Colour aberration from original product may be Technical data, drawings and dimensions caused by printing and shall not give rise to a are not binding. claim.

11.04.2013 We accept no liability for printing errors. CONTENT 3 © VBH DOOR HARDWARE Lever handle sets greenteQ Stainless steel greenteQ Lever handle set for internal doors DG 60L.ER.RS greenteQ lever handle set for internal doors 38 DG 60L.ER.RS; certificated acc. to EN Ø20

1906:2010; with 8 mm square spindle; loose 10 lever on plastic base, with spring mechanism;

invisible, through-fixing; with screws for door 60 thickness 37- 42 mm; stainless steel polished / 55 matt brushed. 135 Technical data: 70 • Bearing: loose lever with spring mechanism

• Diameter of rosette: 52 mm Ø5 2 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø52

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.943 / 6510 ÒGeKa* Ó Stainless steel matt brushed PZ 8 mm 1 set 396.944 / 6510 ÒGeLa*#Ó Stainless steel matt brushed WC 8 mm 1 set 396.945 / 6510 ÒGeMa*&Ó

greenteQ Lever handle set for internal doors DG 61L.ER.RS greenteQ lever handle set for internal doors 38 DG 61L.ER.RS; certificated acc. to EN

1906:2010; with 8 mm square spindle; loose 10 lever on plastic base, with spring mechanism; invisible, through-fixing; with screws for door 55 thickness 37- 42 mm; stainless steel polished / matt brushed. Ø2 0 130 Technical data: 65 • Bearing: loose lever with spring mechanism

• Diameter of rosette: 52 mm Ø5 2 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø5 2

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.946 / 6510 ÒGeNa*)Ó Stainless steel matt brushed PZ 8 mm 1 set 396.947 / 6510 ÒGeOa*,Ó Stainless steel matt brushed WC 8 mm 1 set 396.948 / 6510 ÒGePa*/Ó

4 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handle sets greenteQ Stainless steel © VBH DOOR HARDWARE Lever handle sets greenteQ Stainless steel greenteQ Lever handle set for internal doors DG 62L.ER.RS greenteQ lever handle set for internal doors 38 DG 62L.ER.RS; certificated acc. to EN

1906:2010; with 8 mm square spindle; loose 10 lever on plastic base, with spring mechanism; invisible, through-fixing; with screws for door 60 thickness 37- 42 mm; stainless steel polished / matt brushed. Ø2 0 135

Technical data: 70 • Bearing: loose lever with spring mechanism

• Diameter of rosette: 52 mm Ø5 2 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø5 2

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.949 / 6510 ÒGeQa*2Ó Stainless steel matt brushed PZ 8 mm 1 set 396.950 / 6510 ÒGeRa*5Ó Stainless steel matt brushed WC 8 mm 1 set 396.951 / 6510 ÒGeSa*8Ó

greenteQ Lever handle set for internal doors DG 69L.ER.RS greenteQ lever handle set for internal doors 38 DG 69L.ER.RS; certificated acc. to EN

1906:2010; with 8 mm square spindle; loose 10 lever on plastic base, with spring mechanism;

invisible, through-fixing; with screws for door 60 thickness 37- 42 mm; stainless steel polished / matt brushed. Ø2 4 135 Technical data: 70 • Bearing: loose lever with spring mechanism

• Diameter of rosette: 52 mm Ø5 2 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø5 2

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.952 / 6510 ÒGeTa*;Ó Stainless steel matt brushed PZ 8 mm 1 set 396.953 / 6510 ÒGeUa*>Ó Stainless steel matt brushed WC 8 mm 1 set 396.954 / 6510 ÒGeVa*AÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 5 © VBH Lever handle sets greenteQ Stainless steel DOOR HARDWARE Lever handle sets greenteQ Stainless steel greenteQ Lever handle set for internal doors DG 70L.ER.RS greenteQ lever handle set for internal doors 38 DG 70L.ER.RS; certificated acc. to EN

1906:2010; with 8 mm square spindle; loose 10 Ø2 lever on plastic base, with spring mechanism; 0

invisible, through-fixing; with screws for door 60 thickness 37- 42 mm; stainless steel polished / matt brushed. 135 Technical data: 70 • Bearing: loose lever with spring mechanism

• Diameter of rosette: 52 mm Ø5 2 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø5 2

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.955 / 6510 ÒGeWa*DÓ Stainless steel matt brushed PZ 8 mm 1 set 396.956 / 6510 ÒGeXa*GÓ Stainless steel matt brushed WC 8 mm 1 set 396.957 / 6510 ÒGeYa*JÓ

greenteQ Lever handle set for internal doors DG 71L.ER.RS greenteQ lever handle set for internal doors 38 DG 71L.ER.RS; certificated acc. to EN

1906:2010; with 8 mm square spindle; loose 10 lever on plastic base, with spring mechanism; 10 invisible, through-fixing; with screws for door 55 thickness 37- 42 mm; stainless steel polished / matt brushed. Ø2 0 135 Technical data: 65 • Bearing: loose lever with spring mechanism

• Diameter of rosette: 52 mm Ø5 2 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø5 2

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.958 / 6510 ÒGeZa*MÓ Stainless steel matt brushed PZ 8 mm 1 set 396.959 / 6510 ÒGe[a*PÓ Stainless steel matt brushed WC 8 mm 1 set 396.960 / 6510 ÒGe\a*SÓ

6 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handle sets greenteQ Stainless steel © VBH DOOR HARDWARE Lever handle sets greenteQ Stainless steel greenteQ Lever handle set for internal doors DG 73L.ER.RS greenteQ lever handle set for internal doors 38 DG 73L.ER.RS; certificated acc. to EN

1906:2010; with 8 mm square spindle; loose 10 lever on plastic base, with spring mechanism; 22,5 45°

invisible, through-fixing; with screws for door 60 thickness 37- 42 mm; stainless steel polished / matt brushed. 17,5 135 Technical data: 70 • Bearing: loose lever with spring mechanism

• Diameter of rosette: 52 mm Ø5 2 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø52

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.961 / 6510 ÒGe]a*VÓ Stainless steel matt brushed PZ 8 mm 1 set 396.962 / 6510 ÒGe^a*YÓ Stainless steel matt brushed WC 8 mm 1 set 396.963 / 6510 ÒGe_a*\Ó

greenteQ Lever handle set for internal doors DG 74L.ER.RS greenteQ lever handle set for internal doors 38 DG 74L.ER.RS; certificated acc. to EN

1906:2010; with 8 mm square spindle; loose 10 lever on plastic base, with spring mechanism; invisible, through-fixing; with screws for door 47

thickness 37- 42 mm; stainless steel polished / Ø1 8 matt brushed. 130 57 Technical data: • Bearing: loose lever with spring mechanism

• Diameter of rosette: 52 mm Ø5 2 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø5 2

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.964 / 4265 ÒGe`JaHÓ Stainless steel matt brushed PZ 8 mm 1 set 396.965 / 4265 ÒGeaJaKÓ Stainless steel matt brushed WC 8 mm 1 set 396.966 / 4265 ÒGebJaNÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 7 © VBH Lever handle sets greenteQ Stainless steel DOOR HARDWARE Lever handle sets greenteQ Stainless steel greenteQ Lever handle set for internal doors DG 75L.ER.RS greenteQ lever handle set for internal doors 38 DG 75L.ER.RS; certificated acc. to EN

1906:2010; with 8 mm square spindle; loose 10 lever on plastic base, with spring mechanism;

invisible, through-fixing; with screws for door 60 thickness 37- 42 mm; stainless steel polished / matt brushed. Ø2 0 135 Technical data: 70 • Bearing: loose lever with spring mechanism • Diameter of rosette: 52 mm 52 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø5 2Ø

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.967 / 4265 ÒGecJaQÓ Stainless steel matt brushed PZ 8 mm 1 set 396.968 / 4265 ÒGedJaTÓ Stainless steel matt brushed WC 8 mm 1 set 396.969 / 4265 ÒGeeJaWÓ

greenteQ Lever handle set for internal doors DG 76L.ER.RS greenteQ lever handle set for internal doors 38 DG 76L.ER.RS; certificated acc. to EN

1906:2010; with 8 mm square spindle; loose 10 lever on plastic base, with spring mechanism; invisible, through-fixing; with screws for door 52 thickness 37- 42 mm; stainless steel polished / Ø2 0 matt brushed. 130 Technical data: 62 • Bearing: loose lever with spring mechanism

• Diameter of rosette: 52 mm Ø5 2 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø5 2

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.970 / 4265 ÒGefJaZÓ Stainless steel matt brushed PZ 8 mm 1 set 396.971 / 4265 ÒGegJa]Ó Stainless steel matt brushed WC 8 mm 1 set 396.972 / 4265 ÒGehJa`Ó

8 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handle sets greenteQ Stainless steel © VBH DOOR HARDWARE Lever handle sets greenteQ Stainless steel greenteQ Lever handle set for internal doors DG 77L.ER.RS greenteQ lever handle set for internal doors 38 DG 77L.ER.RS; certificated acc. to EN

• Diameter of rosette: 52 mm Ø52 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø5 2

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.973 / 4265 ÒGeiJacÓ Stainless steel matt brushed PZ 8 mm 1 set 396.974 / 4265 ÒGejJafÓ Stainless steel matt brushed WC 8 mm 1 set 396.975 / 4265 ÒGekJaiÓ

greenteQ Lever handle set for internal doors DG 78L.ER.RS greenteQ lever handle set for internal doors 38 DG 78L.ER.RS; certificated acc. to EN

1906:2010; with 8 mm square spindle; loose 10 lever on plastic base, with spring mechanism;

invisible, through-fixing; with screws for door 55 thickness 37- 42 mm; stainless steel polished / matt brushed. Ø2 0 130 Technical data: 65 • Bearing: loose lever with spring mechanism

• Diameter of rosette: 52 mm Ø5 2 • Height of edge: 10 mm • For door thickness: 37 - 42 mm • Screws: inclusive 4 x M5 x 50/55 mm Ø5 2

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 396.976 / 4265 ÒGelJalÓ Stainless steel matt brushed PZ 8 mm 1 set 396.977 / 4265 ÒGemJaoÓ Stainless steel matt brushed WC 8 mm 1 set 396.978 / 4265 ÒGenJarÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 9 © VBH Lever handle sets greenteQ Stainless steel DOOR HARDWARE Lever handle sets greenteQ Stainless steel greenteQ Drilling jig set

The greenteQ drilling jig set for lever handle sets is prepared for the fixing of lever handle sets with round roses and lever handle sets for framed doors with long plate. The drilling jig set includes four different paper templates for rose furniture with distances of BB / PZ 72 mm , WC 78 mm or PZ 92 mm as well as for lever handle sets for framed doors with 92 mm distance. The drilling jig is made of plastic, equipped with hardened bushes and will be delivered in one practical plastic box. The required guide pins and drills are included.

Content: • 1.Drilling jig • 2.Paper templates - for lever handle sets for framed doors PZ 92 with long plate - for lever handle sets on round rose WC 78 mm distance - for lever handle sets on round rose BB / PZ 72 mm distance - for security roses PZ 92 mm distance • 3.Knurled screw M5 • 4.Guide pins Ø 8 mm (for 8 mm square spindle aperture ) Ø 9 mm (for 9 mm square spindle aperture ) Ø 10 mm (for 10 mm square spindle aperture ) Ø 7 mm (for BB-Lock) Ø 8 mm (for WC-Lock) Ø 17 mm (for PZ-Lock) • 5.Drills Ø 9 mm Ø 10.5 mm

Material PU VBH Article-No. Plastic with hardened bushes 1 set 396.668 / 0000 ÒGbd dÓ

greenteQ Lever handle set for internal doors DG 60.ER.RS greenteQ lever handle sets for interior doors in 38 living areas. Ø20 greenteQ lever handle set for internal doors 8 DG 60.ER.RS; with 8 mm square spindle; 60 lever fixed movable on metal base, with spring 55 mechanism; invisible, through-fixing; with screws for door thickness 38- 43 mm; stainless steel matt brushed. 135 68 Technical data: 52 • Bearing: lever fixed movable with spring Ø mechanism • Diameter of rosette: 52 mm 52 • Height of edge: 8 mm Ø • For door thickness: 38 - 43 mm • Screws: inclusive 4 x M5 x 50 mm and 4 x M5 x 55 mm

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 971.814 / 6500 ÒÊ2.a 9Ó Stainless steel matt brushed PZ 8 mm 1 set 971.815 / 6500 ÒÊ2/a <Ó Stainless steel matt brushed WC 8 mm 1 set 971.816 / 6500 ÒÊ20a ?Ó

10 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handle sets greenteQ Stainless steel © VBH DOOR HARDWARE Lever handle sets greenteQ Stainless steel greenteQ Lever handle set for internal doors DG 61.ER.RS greenteQ lever handle sets for interior doors in 38 living areas. greenteQ lever handle set for internal doors 8 DG 61.ER.RS; with 8 mm square spindle

(WC set 7 mm); lever fixed movable on metal 55 20 base, with spring mechanism; in 2 parts divided Ø rose-cover to simplify assembling; invisible, through-fixing; with screws for door thickness 130 38- 43 mm; stainless steel matt brushed. 63 52 Technical data: Ø • Bearing: lever fixed movable with spring 52

mechanism Ø • Diameter of rosette: 52 • Height of edge: 8 mm • For door thickness: 38 - 43 mm • Screws: inclusive 4xM5x50 mm and 4xM5x55 mm

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 971.808 / 6500 ÒÊ2(a 'Ó Stainless steel matt brushed PZ 8 mm 1 set 971.809 / 6500 ÒÊ2)a *Ó Stainless steel matt brushed WC 8 mm 1 set 971.810 / 6500 ÒÊ2*a -Ó

greenteQ Lever handle set for internal doors DG 62.ER.RS greenteQ lever handle sets for interior doors in 38 living areas. greenteQ lever handle set for internal doors 8 DG 60.ER.RS; with 8 mm square spindle

(WC set 7 mm); lever fixed movable on metal 60

base, with spring mechanism; invisible, through- 20 fixing; with screws for door thickness 38- 43 mm; Ø stainless steel matt brushed. 135 68 Technical data: 52 • Bearing: lever fixed movable with spring Ø mechanism

• Diameter of rosette: 52 mm 52 Ø • Height of edge: 8 mm • For door thickness: 38 - 43 mm • Screws: inclusive 4xM5x50 mm and 4xM5x55 mm

Material Surface Type of punch Square spindle PU VBH Article-No. Stainless steel matt brushed BB 8 mm 1 set 971.811 / 6500 ÒÊ2+a 0Ó Stainless steel matt brushed PZ 8 mm 1 set 971.812 / 6500 ÒÊ2,a 3Ó Stainless steel matt brushed WC 8 mm 1 set 971.813 / 6500 ÒÊ2-a 6Ó

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 11 © VBH Lever handle sets greenteQ Stainless steel DOOR HARDWARE Lever handles greenteQ Stainless steel greenteQ Lever handle DG 60.ER.RS.LT greenteQ lever handle DG 60.ER.RS.LT; for 38

8 mm square spindle; lever fixed movable on 8 Ø20 metal base; invisible fixing; stainless steel matt

brushed. 65 50

135

73 52 Ø

Material Surface Square spindle Variants PU VBH Article-No. Stainless steel matt brushed for 8 mm with cams 1 pc. 994.717 / 6500 ÒÌO1a ~Ó

greenteQ Lever handle DG 61.ER.RS.LT

38 greenteQ Lever handle DG 61.ER.RS.LT; for 38 8 8 mm square spindle; lever fixed movable on 8

metal base; in 2 parts divided rose-cover to 55 55 20 20

simplify assembling; invisible fixing; stainless Ø Ø steel matt brushed. 130 130 63 63 52 52 Ø Ø

Material Surface Square spindle Variants PU VBH Article-No. Stainless steel matt brushed for 8 mm with cams 1 pc. 994.720 / 6500 ÒÌO4a Ó Stainless steel matt brushed for 8 mm without cams 1 pc. 385.438 / 6500 ÒFVFa 'Ó

greenteQ Lever handle DG 62.ER.RS.LT greenteQ Lever handle DG 61.ER.RS.LT; for 38

8 mm square spindle; lever fixed movable on 8 metal base; in 2 parts divided rose-cover to

simplify assembling; invisible fixing; stainless 60 steel matt brushed. 20 Ø

135 68 52 Ø

Material Surface Square spindle Variants PU VBH Article-No. Stainless steel matt brushed for 8 mm with cams 1 pc. 994.719 / 6500 ÒÌO3a ÍÓ

greenteQ Square spindle

Material Surface Dimension VBH Article-No. Steel galvanized 8 x 60 mm 898.295 / 0060 ÒyrÈ \0Ó Steel galvanized 8 x 70 mm 898.295 / 0070 ÒyrÈ fbÓ Steel galvanized 8 x 80 mm 898.295 / 0080 ÒyrÈ p-Ó

12 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handles greenteQ Stainless steel © VBH DOOR HARDWARE Lever handles greenteQ Stainless steel greenteQ Half square spindle 8/10

Material Surface Dimension VBH Article-No. Steel galvanized 8/10 x 70 mm 375.275 / 4010 ÒETkH*_Ó

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 13 © VBH Lever handles greenteQ Stainless steel DOOR HARDWARE Security rosette pair greenteQ Stainless steel greenteQ Outside security rosette PZ 12mm ER stainless steel greenteQ rosettes for entrance doors, to combine with pull handles and lever handles. 55 greenteQ outside security rosette PZ 12mm Ø ER stainless steel; round; for profile cylinder; diameter of rosette 55 mm, height of edge 12 mm; invisible fixing; for door thickness 57 - 72 mm; stainless steel matt brushed. 38

Technical data: 12 • Keyhole: PZ • Door thickness: 57 - 72 mm • Screws: M5 x 70 mm (2 pcs.), M5 x 80 mm (2 pcs.) • Packaging unit: 10 pieces

Material Surface Height of edge PU VBH Article-No. Stainless steel matt brushed 12 mm 10 pieces 318.983 / 6500 Ò?ysa ÏÓ

greenteQ Security rosette pair PZ 12mm ER stainless steel greenteQ rosettes for entrance doors, to combine with pull handles and lever handles. 52 55 Ø greenteQ security rosette pair PZ 12 ER round; Ø for profile cylinder; outside: diameter of rosette 55 mm, height of edge 12 mm; inside: diameter of rosette 52 mm, height of edge 8 mm; invisible fixing; for door thickness 57 - 72 mm; 38 38 stainless steel matt brushed. 8 12

Technical data: • Keyhole: PZ • Door thickness: 57 - 72 mm • Screws: M5 x 70 mm (2 pcs.), M5 x 80 mm (2 pcs.) • Packaging unit: 10 pairs

Material Surface Height of edge PU VBH Article-No. Stainless steel matt brushed 12/8 mm 10 pairs 315.170 / 6500 Ò?Sfa zÓ

greenteQ Security rosette pair ZA PZ 14 mm ER greenteQ rosettes for entrance doors, to combine with pull handles and lever handles. 52 55 Ø greenteQ security rosette pair ZA PZ 14 mm Ø ER, with cylinder cover; round; for profile cylinder; outside: diameter of rosette 55 mm, height of edge 14 mm; inside: diameter of rosette 52 mm, height of edge 8 mm; invisible 38 38 fixing; door thickness 67 - 72 mm; stainless 8 steel matt brushed. 14

Technical data: • Keyhole: PZ • Door thickness: 67 - 72 mm • Screws: M5 x 80 mm (2 pcs.) • Packaging unit: 10 pieces

Material Surface Height of edge PU VBH Article-No. Stainless steel matt brushed 14/8 mm 10 pairs 381.878 / 6500 ÒF2na WÓ

14 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Security rosette pair greenteQ Stainless steel © VBH DOOR HARDWARE Security rosette pair greenteQ Aluminium greenteQ Security rosette pair ZA PZ 15 mm AL greenteQ rosettes for entrance doors, to combine with pull handles and lever handles. greenteQ security rosette pair ZA PZ 15 mm AL, with cylinder cover; round; for profile cylinder; diameter of rosette 55 mm; outside: height of edge 15 mm, for cylinder protrusion 10 - 16 mm; inside: height of edge 8 mm; invisible fixing; door thickness 67 - 72 mm; aluminium silver anodized.

Technical data: • Keyhole: PZ • Door thickness: 67 - 72 mm

• Screws: M5 x 80 mm (2 pcs.) 55 55 • Packaging unit: 10 pairs Ø Ø

Height Surface Colour code PU VBH Article-No. of edge 38 38 silver anodized F1 15/8 mm 10 pairs 381.878 / 0100 ÒF2n! %Ó 8 15

greenteQ Security rosette pair PZ 12 mm AL greenteQ rosettes for entrance doors, to combine with pull handles and lever handles. greenteQ security rosette pair PZ 12 mm AL round; for profile cylinder; diameter of rosette 55 mm; outside: height of edge 12 mm; inside: height of edge 8 mm; invisible fixing; door thickness 57 - 72 mm; aluminium silver anodized.

Technical data: • Keyhole: PZ • Door thickness: 57-72 mm • Screws: M5 x 70 mm (2 pcs.), M5 x 80 mm (2 pcs.) 55 55 Ø • Packaging unit: 10 pair Ø

Height Surface Colour code PU VBH Article-No. of edge 38 38 silver anodized F1 12/8 mm 10 pairs 318.975 / 0100 Ò?yk! <Ó 8 12

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 15 © VBH Security rosette pair greenteQ Aluminium DOOR HARDWARE Lever handle greenteQ Aluminium greenteQ Lever handle DG 59.AL.ORS.LT

greenteQ lever handle DG 59.AL.ORS.LT; for 14 8 mm square spindle; lever fixed movable on

metal base, with spring mechanism; invisible 55

fixing; aluminium. 35

147

69 33 74 50

Surface Colour code Variants Square spindle PU VBH Article-No. silver anodized F1 without cams for 8 mm 1 pc. 316.631 / 0100 Ò?b?! XÓ white RAL 9016 without cams for 8 mm 1 pc. 316.631 / 1600 Ò?b?0 -Ó brown RAL 8019 without cams for 8 mm 1 pc. 316.631 / 8019 Ò?b?p3WÓ

greenteQ Square spindle

greenteQ Half square spindle 8/10

Material Surface Dimension VBH Article-No. Steel galvanized 8/10 x 70 mm 375.275 / 4010 ÒETkH*_Ó

16 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handle framed doors greenteQ Aluminium © VBH DOOR HARDWARE Sliding rosette greenteQ Aluminium greenteQ Sliding rosette oval 6 mm AL greenteQ rosettes for entrance doors, to 33 6 combine with pull handles and lever handles. greenteQ sliding rosette oval 6mm AL; for profile cylinder; height of edge 6 mm; aluminium. 74 Technical data: • Keyhole: PZ • Door thickness: - • Screws: exclusive • Packaging unit: 10 pieces

Surface Colour code Height of edge PU VBH Article-No. silver anodized F1 6 mm 10 pieces 359.542 / 0100 ÒCÈJ! PÓ white RAL 9016 6 mm 10 pieces 359.542 / 1600 ÒCÈJ0 %Ó brown RAL 8019 6 mm 10 pieces 359.542 / 8019 ÒCÈJp3OÓ

greenteQ Sliding rosette oval 9 mm AL greenteQ rosettes for entrance doors, to 33 9 combine with pull handles and lever handles. greenteQ sliding rosette oval 9 mm AL; for profile cylinder; height of edge 9 mm; aluminium. 74 Technical data: • Keyhole: PZ • Door thickness: - • Screws: exclusive • Packaging unit: 10 pieces

Surface Colour code Height of edge PU VBH Article-No. silver anodized F1 9 mm 10 pieces 316.635 / 0100 Ò?bC! dÓ white RAL 9016 9 mm 10 pieces 316.635 / 1600 Ò?bC0 9Ó brown RAL 8019 9 mm 10 pieces 316.635 / 8019 Ò?bCp3cÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 17 © VBH Sliding rosette greenteQ Aluminium DOOR HARDWARE Lever handle greenteQ stainless steel greenteQ Lever handle DG 59.ER.ORS.LT

greenteQ lever handle DG 59.ER.ORS.LT; for 14 8 mm square spindle; lever fixed movable on

metal base, with spring mechanism; invisible 55

fixing; stainless steel matt brushed. 35

147

69 34 72 50

Material Surface Variants Square spindle PU VBH Article-No. Stainless steel matt brushed without cams for 8 mm 1 pc. 316.631 / 6500 Ò?b?a #Ó

greenteQ Lever handle DG 60.ER.ORS.LT

Ø20 greenteQ lever handle DG 60.ER.ORS.LT; for 14 8 mm square spindle; lever fixed movable on 60 metal base, with spring mechanism; invisible 55 fixing; stainless steel matt brushed.

135

74 34 72 50

Material Surface Variants Square spindle PU VBH Article-No. Stainless steel matt brushed without cams for 8 mm 1 pc. 987.209 / 6500 ÒËh)a 0Ó

greenteQ Lever handle DG 60V.ER.ORS.LT

Ø20 greenteQ lever handle DG 60V.ER.ORS.LT; for 14 8 mm square spindle; lever fixed movable on metal base, with spring mechanism; invisible 60 55 fixing; stainless steel matt brushed.

140

74 34 72 50

Material Surface Variants Square spindle PU VBH Article-No. Stainless steel matt brushed without cams for 8 mm 1 pc. 995.525 / 6500 ÒÌW9a ?Ó

greenteQ Lever handle DG 60A.ER.ORS.LT greenteQ lever handle DG 60A.ER.ORS.LT; for Ø20 14 8 mm square spindle; lever fixed movable on 64 metal base, with spring mechanism; invisible 50 fixing; stainless steel matt brushed. 160

78 34 50 72

Material Surface Variants Square spindle PU VBH Article-No. Stainless steel matt brushed without cams for 8 mm 1 pc. 312.866 / 6500 Ò?

18 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handle framed doors greenteQ stainless steel © VBH DOOR HARDWARE Lever handle greenteQ stainless steel greenteQ Lever handle DG 61.ER.ORS.LT

greenteQ lever handle DG 61.ER.ORS.LT; for 14 8 mm square spindle; lever fixed movable on metal base, with spring mechanism; invisible 55 20 fixing; aluminium. Ø

130

74 34 50 72

Material Surface Variants Square spindle PU VBH Article-No. Stainless steel matt brushed without cams for 8 mm 1 pc. 987.213 / 6500 ÒËh-a <Ó

greenteQ Lever handle DG 61A.ER.ORS.LT

greenteQ lever handle DG 61A.ER.ORS.LT; for 14 8 mm square spindle; lever fixed movable on

metal base, with spring mechanism; invisible 73

fixing; aluminium. 20 Ø

155

87 34 50 72

Material Surface Variants Square spindle PU VBH Article-No. Stainless steel matt brushed without cams for 8 mm 1 pc. 381.892 / 6500 ÒF2|a ÊÓ

greenteQ Square spindle

greenteQ Half square spindle 8/10

Material Surface Dimension VBH Article-No. Steel galvanized 8/10 x 70 mm 375.275 / 4010 ÒETkH*_Ó

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 19 © VBH Lever handle framed doors greenteQ stainless steel DOOR HARDWARE Sliding rosettes greenteQ Stainless steel greenteQ Sliding rosette PZ oval 6 mm ER greenteQ rosettes for entrance doors, to 33 6 combine with pull handles and lever handles. greenteQ sliding rosette PZ oval 6 mm ER stainless steel; for profile cylinder; height of edge 6 mm; stainless steel matt brushed. 74 Technical data: • Keyhole: PZ • Door thickness: - • Screws: exclusive • Packaging unit: 10 pieces

Material Surface Height of edge PU VBH Article-No. Stainless steel matt brushed 6 mm 10 pieces 359.542 / 6500 ÒCÈJa ËÓ

greenteQ Sliding rosette oval 9 mm ER greenteQ rosettes for entrance doors, to 33 9 combine with pull handles and lever handles. greenteQ sliding rosette oval 9 mm ER stainless steel; for profile cylinder; height of edge 9 mm; stainless steel matt brushed. 72 Technical data: • Keyhole: PZ • Door thickness: - • Screws: exclusive • Packaging unit: 10 pieces

Material Surface Height of edge PU VBH Article-No. Stainless steel matt brushed 9 mm 10 pieces 354.412 / 6500 ÒCL,a )Ó

greenteQ Sliding rosette ZA oval 14 mm ER greenteQ rosettes for entrance doors, to 33 14 combine with pull handles and lever handles. greenteQ sliding rosette ZA oval 14 mm ER, with cylinder cover; for profile cylinder; height of edge 14 mm; for cylinder protrusion 5 - 10 mm; stainless steel matt brushed.

Technical data: • Keyhole: PZ • Door thickness: - • Screws: exclusive • Packaging unit: 10 pieces

Material Surface Height of edge PU VBH Article-No. Stainless steel matt brushed 14 mm 10 pieces 359.794 / 6500 ÒCÊ~a TÓ

20 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Sliding rosettes greenteQ Stainless steel © VBH DOOR HARDWARE Sliding rosettes greenteQ Stainless steel greenteQ Sliding rosette PZ oval 9 mm ER greenteQ rosettes for entrance doors, to 33 9 combine with pull handles and lever handles. greenteQ sliding rosette PZ oval 9 mm ER ; for profile cylinder; clip on; height of edge 9 mm; stainless steel matt brushed. 72 Technical data: • Keyhole: PZ • Door thickness: - • Screws: exclusive • Packaging unit: 10 pieces

Material Surface Height of edge PU VBH Article-No. Stainless steel matt brushed 9 mm 10 pieces 971.807 / 6500 ÒÊ2'a $Ó

greenteQ Sliding rosette PZ 10 mm ER

30 greenteQ rosette for entrance doors, to 10 combine with pull handles and lever handles. greenteQ sliding rosette PZ 10 mm ER for profile cylinders projecting out of the door. They will be protected by greenteQ sliding 70 rosette. Height of edge 10 mm; stainless steel 25° matt brushed.

• Technical data: Keyhole: PZ • Packaging unit: 10 pieces

Material Surface Height of edge PU VBH Article-No. Stainless steel matt brushed 10 mm 10 pieces 402.939 / 6500 ÒH=Ga aÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 21 © VBH Sliding rosettes greenteQ Stainless steel DOOR HARDWARE Pull handles greenteQ Stainless steel greenteQ Pull handle TG 10.ER.GS greenteQ stainless steel pull handles, for single-sided or pairwise use, on interior and exterior 82 doors. greenteQ pull handle TG 10.ER.GS; with straight stilts; diameter of handle bar 32 mm; diameter of stilts 25 mm; fixing system BA 15 not included; stainless steel matt brushed.

Dimension L Material Surface Length L VBH Article-No. A Axis A Stainless matt brushed 210 mm 330 mm 374.333 / 6500 steel ÒEKAa hÓ Stainless matt brushed 300 mm 400 mm 320.345 / 6500 steel Ò@#Ma 7Ó Stainless matt brushed 300 mm 500 mm 318.654 / 6500 steel Ò?vVa )Ó Stainless 2

Ø3 matt brushed 400 mm 600 mm 332.109 / 6500 Ø25 steel ÒA5)a WÓ Stainless matt brushed 560 mm 800 mm 332.111 / 6500 steel ÒA5+a ]Ó Stainless matt brushed 700 mm 1,000 mm 332.113 / 6500 steel ÒA5-a cÓ Stainless matt brushed 900 mm 1,200 mm 332.114 / 6500 steel ÒA5.a fÓ Stainless matt brushed 1,000 mm 1,400 mm 332.116 / 6500 steel ÒA50a lÓ Stainless matt brushed 1,200 mm 1,600 mm 332.118 / 6500 steel ÒA52a rÓ Stainless matt brushed 1,300 mm 1,800 mm 332.119 / 6500 steel ÒA53a uÓ

greenteQ Pull handle TG 10.ER.GS with 45° stilts greenteQ stainless steel pull handles, for B single-sided or pairwise use, on interior and exterior doors. greenteQ pull handleTG 10.ER.GS; with 45° angle stilts; diameter of handle bar 32 mm; diameter of stilts 25 mm; fixing system BA 15

A not included; stainless steel matt brushed. L

45° Ø25

Ø32

Material Surface Dimension Axis A Length L Dimension B Dimension C VBH Article-No. Stainless steel matt brushed 210 mm 330 mm 100 mm 80 mm 374.334 / 6500 ÒEKBa kÓ Stainless steel matt brushed 300 mm 400 mm 100 mm 80 mm 344.713 / 6500 ÒBO-a 1Ó Stainless steel matt brushed 300 mm 500 mm 100 mm 80 mm 344.715 / 6500 ÒBO/a 7Ó Stainless steel matt brushed 400 mm 600 mm 100 mm 80 mm 344.716 / 6500 ÒBO0a :Ó Stainless steel matt brushed 560 mm 800 mm 100 mm 80 mm 344.718 / 6500 ÒBO2a @Ó Stainless steel matt brushed 700 mm 1,000 mm 100 mm 80 mm 344.723 / 6500 ÒBO7a OÓ Stainless steel matt brushed 900 mm 1,200 mm 100 mm 80 mm 344.727 / 6500 ÒBO;a [Ó Stainless steel matt brushed 1,000 mm 1,400 mm 100 mm 80 mm 374.335 / 6500 ÒEKCa nÓ Stainless steel matt brushed 1,200 mm 1,600 mm 100 mm 80 mm 374.336 / 6500 ÒEKDa qÓ Stainless steel matt brushed 1,300 mm 1,800 mm 100 mm 80 mm 374.337 / 6500 ÒEKEa tÓ

22 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Pull handles greenteQ Stainless steel © VBH DOOR HARDWARE Pull handles greenteQ Stainless steel greenteQ Pull handle TG 10.ER.GS with 45° extended stilts greenteQ stainless steel pull handles, for B single-sided or pairwise use, on interior and exterior doors. greenteQ pull handle TG 10.ER.GS; with 45° angle, extended stilts; diameter of handle bar 32 mm; diameter of stilts 25 mm; fixing

L system BA 15 not included; stainless steel matt brushed.

45° Ø25

Ø32

Material Surface Dimension Axis A Length L Dimension B Dimension C VBH Article-No. Stainless steel matt brushed 210 mm 330 mm 108 mm 90 mm 398.486 / 6500 ÒGtva &Ó Stainless steel matt brushed 300 mm 400 mm 136 mm 116 mm 380.855 / 6500 ÒF(Wa eÓ Stainless steel matt brushed 300 mm 400 mm 108 mm 90 mm 398.487 / 6500 ÒGtwa )Ó Stainless steel matt brushed 300 mm 500 mm 108 mm 90 mm 398.488 / 6500 ÒGtxa ,Ó Stainless steel matt brushed 400 mm 600 mm 136 mm 116 mm 380.856 / 6500 ÒF(Xa hÓ Stainless steel matt brushed 400 mm 600 mm 108 mm 90 mm 398.489 / 6500 ÒGtya /Ó Stainless steel matt brushed 560 mm 800 mm 108 mm 90 mm 398.490 / 6500 ÒGtza 2Ó Stainless steel matt brushed 700 mm 1,000 mm 108 mm 90 mm 398.491 / 6500 ÒGt{a 5Ó Stainless steel matt brushed 900 mm 1,200 mm 108 mm 90 mm 398.492 / 6500 ÒGt|a 8Ó Stainless steel matt brushed 1,000 mm 1,400 mm 108 mm 90 mm 398.493 / 6500 ÒGt}a ;Ó Stainless steel matt brushed 1,200 mm 1,600 mm 108 mm 90 mm 398.494 / 6500 ÒGt~a >Ó Stainless steel matt brushed 1,300 mm 1,800 mm 108 mm 90 mm 398.495 / 6500 ÒGtÈa AÓ

greenteQ Pull handle TG 11.ER.GS with 45° stilts greenteQ stainless steel pull handles, for B single-sided or pairwise use, on interior and exterior doors. greenteQ pull handle TG 11.ER.GS; with milled points with 45° angle stilts; diameter of handle bar 32 mm; diameter of stilts 25 mm; fixing system BA 15 not included; stainless steel matt A L brushed.

45° Ø25

Ø32

Material Surface Dimension Axis A Length L Dimension B Dimension C VBH Article-No. Stainless steel matt brushed 300 mm 400 mm 100 mm 80 mm 381.614 / 6500 ÒF0.a aÓ Stainless steel matt brushed 300 mm 500 mm 100 mm 80 mm 377.414 / 6500 ÒEj.a mÓ Stainless steel matt brushed 400 mm 600 mm 100 mm 80 mm 381.615 / 6500 ÒF0/a dÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 23 © VBH Pull handles greenteQ Stainless steel DOOR HARDWARE Pull handles greenteQ Stainless steel greenteQ Pull handle TG 12.ER greenteQ stainless steel pull handles, for single-sided or pairwise use, on interior and exterior 52/117 mm 82 doors. greenteQ pull handle TG 12.ER; with straight stilts; diameter of handle bar 32 mm; diameter of stilts 25 mm; fixing system BA 15 not included; stainless steel matt brushed.

L Dimension Length Material Surface VBH Article-No. Axis A L Stainless steel matt brushed 300 mm 400 mm 381.451 / 6500 ÒF.Sa eÓ Stainless steel matt brushed 695 mm 800 mm 381.450 / 6500 ÒF.Ra bÓ Ø32

Ø25

greenteQ Pull handle TG 12.ER with 45° stilts greenteQ stainless steel pull handles, for 110/142 mm B single-sided or pairwise use, on interior and exterior doors. greenteQ pull handle TG 12.ER; with 45° angle stilts; diameter of handle bar 32 mm; diameter of stilts 25 mm; fixing system BA 15 not

L included; stainless steel matt brushed. A

45° Ø25

Ø32

Material Surface Dimension Axis A Length L Dimension B Dimension C VBH Article-No. Stainless steel matt brushed 300 mm 400 mm 110 mm 78 mm 388.438 / 6500 ÒFtFa cÓ Stainless steel matt brushed 560 mm 800 mm 142 mm 78 mm 388.439 / 6500 ÒFtGa fÓ

greenteQ Pull handle TG 10.ER.GKL greenteQ stainless steel pull handles, for single-sided or pairwise use, on interior and exterior 150 doors. greenteQ pull handle TG 10.ER.GB; diameter of handle 32 mm; dimension 300 mm or 350 mm; fixing system BA 15 not included; stainless steel matt brushed.

Dimension Length L Material Surface VBH Article-No. Axis A L Stainless steel matt brushed 300 mm 332 mm 312.885 / 6500 Ò?

80 Ø32

24 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Pull handles greenteQ Stainless steel © VBH DOOR HARDWARE Pull handles greenteQ Stainless steel greenteQ Pull handle TG 10.ER.GKW greenteQ stainless steel pull handles, for single-sided or pairwise use, on interior and exterior 163 doors. greenteQ pull handle TG 10.ER.GB; diameter of handle 32 mm; dimension 300 mm or 350 mm; fixing system BA 15 not included; stainless steel matt brushed.

L Dimension Length A Material Surface VBH Article-No. Axis A L Stainless steel matt brushed 300 mm 332 mm 312.887 / 6500 Ò?

80 Ø32

greenteQ Pull handle TG 10.ER.GKH greenteQ stainless steel pull handles, for single-sided or pairwise use, on interior and exterior 220 doors. greenteQ pull handle TG 10.ER.GB; diameter of handle 32 mm; dimension 300 mm or 350 mm; fixing system BA 15 not included; stainless steel matt brushed.

L Dimension Length Material Surface VBH Article-No. Axis A L Stainless steel matt brushed 300 mm 332 mm 312.894 / 6500 Ò?<~a -Ó Stainless steel matt brushed 350 mm 382 mm 312.896 / 6500 Ò?<Éa 3Ó

80 Ø32

greenteQ Pull handle TG 10.ER.GB greenteQ stainless steel pull handles, for single-sided or pairwise use, on interior and exterior 80 doors. greenteQ pull handle TG 10.ER.GB; diameter of handle 32 mm; dimension 300 mm or 350 mm; fixing system BA 15 not included; stainless steel matt brushed.

Dimension Length

Material Surface VBH Article-No. L Axis A L Stainless steel matt brushed 300 mm 332 mm 318.655 / 6500 Ò?vWa ,Ó Stainless steel matt brushed 350 mm 382 mm 318.656 / 6500 Ò?vXa /Ó

Ø32

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 25 © VBH Pull handles greenteQ Stainless steel DOOR HARDWARE Pull handles greenteQ Stainless steel greenteQ Fixing system BA 15.EU H/K/A greenteQ pull handle fixations for a solid and durable mounting of the the pull handles. greenteQ pull handle fixing system BA 15.EU.H/K/A; for single-sided, invisible fixing on wooden-, PVC- and aluminium doors; bore diameter 10 mm; length of thread 20, 25, 30, 35, 45 or 55 mm. For 1 fixing point for a door handle 2 pcs needed.

Technical data: • Fixing of handle: single-sided • Bore diameter: 10 mm • For door handles: TG 10... / TG 11... / TG 12... Length of Material Door width PU VBH Article-No. thread Galvanized steel 20 mm - 1 pc. 381.257 / 0000 ÒF,Y =Ó Galvanized steel 25 mm - 1 pc. 382.975 / 0000 ÒF=k .Ó Galvanized steel 30 mm - 1 pc. 381.258 / 0000 ÒF,Z @Ó Galvanized steel 35 mm - 1 pc. 381.259 / 0000 ÒF,[ CÓ Galvanized steel 45 mm - 1 pc. 381.260 / 0000 ÒF,\ FÓ Galvanized steel 55 mm - 1 pc. 383.289 / 0000 ÒF@y ^Ó Galvanized steel 60 mm - 1 pc. 398.057 / 0000 ÒGpY _Ó Galvanized steel 65 mm - 1 pc. 398.058 / 0000 ÒGpZ bÓ

greenteQ Fixing system BA 15.EU.H greenteQ pull handle fixations for a solid and durable mounting of the the pull handles. greenteQ pull handle fixing system BA 15.EU.H; with Rampa-bushing; for single-sided, invisible fixing on wooden doors. For 1 fixing point for a door handle 2 pcs needed.

Technical data: • Fixing of handle: single-sided • Bore diameter: 10,7 - 11,0 mm • For door handles: TG 10... / TG 11... / TG 12... Length of Material Door width PU VBH Article-No. thread Galvanized steel / Brass 14.5 x 25 mm - 1 set 385.334 / 0002 ÒFUB "TÓ

greenteQ Fixing system BA 15.ES.H/K/A greenteQ pull handle fixations for a solid and durable mounting of the the pull handles. greenteQ pull handle fixing system BA 15.ES.H/K/A; for single-sided fixing through-fixing on wooden-, PVC- and aluminium doors; door thickness to 80 mm. For a door handle with two fastening points.

Technical data: • Fixing of handle: single-sided • Bore diameter: M8 • For door handles: TG 10... / TG 11... / TG 12...

Material Door width PU VBH Article-No. Stainless steel / Galvanized steel / to 80mm 1 set 312.937 / 0000 Brass Ò?=E ÌÓ Stainless steel / Galvanized steel / 95 mm 1 set 999.990 / 2167 Brass ÒÌÌz5c]Ó

26 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Pull handles greenteQ Stainless steel © VBH DOOR HARDWARE Pull handles greenteQ Stainless steel greenteQ Fixing system BA 15.PR.H/K/A greenteQ pull handle fixations for a solid and durable mounting of the the pull handles. greenteQ pull handle fixing system BA 15.PR.H/K/A; for pairwise fixing on wooden-, PVC- and aluminium doors; door thickness up to 80 mm. For 1 pair handles with 4 fixing points.

Technical data: • Fixing of handle: in pairs • Bore dimension: M8

Material Door width PU VBH Article-No. Galvanized steel / Brass 80 mm 1 set 385.334 / 0001 ÒFUB !OÓ Galvanized steel / Brass 95 mm 1 set 999.990 / 2168 ÒÌÌz5dbÓ

greenteQ Fixing system BA 15.ES.G greenteQ pull handle fixations for a solid and durable mounting of the the pull handles. greenteQ pull handle fixing system BA 15.ES.G; for single-sided, through-fixing on glass door; bore diameter 13 mm; glass thickness 8 - 12 mm. For 1 handle with 2 fixing points.

Technical data: • Fixing of handle: single-sided, through-fixing • Bore diameter: 13 mm • For door handles: TG 10... / TG 11... / TG 12...

Material Door width PU VBH Article-No. Galvanized steel / Brass / Plastic 8-12 1 set 385.333 / 0002 ÒFUA "QÓ

greenteQ Fixing system BA 15.PR.G greenteQ pull handle fixations for a solid and durable mounting of the the pull handles. greenteQ pull handle fixing system BA 15.PR.G; for pairwise fixing on glass doors; bore diameter 13 mm; glass thickness 8 - 12 mm. For 1 pair of handles with 4 fixing points.

Technical data: • Fixing of handle: in pairs • Bore diameter: 13 mm

Material Door width PU VBH Article-No. Galvanized steel / Brass / Plastic 8-12 1 set 385.333 / 0001 ÒFUA !LÓ

greenteQ Thread insert BA 15.M8

Thread insert with thread M8.

Material Length Door width PU VBH Article-No. Brass 15 mm - 1 pc. 379.183 / 0000 ÒE{s ZÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 27 © VBH Pull handles greenteQ Stainless steel DOOR HARDWARE Pull handles greenteQ stainless steel greenteQ Pull handle TG 189.ER.GKS greenteQ stainless steel pull handles, for single-sided or pairwise use, on interior and exterior 99 doors. greenteQ pull handle TG 189.ER.GKS; diameter of handle 27 mm; total length 320 mm; dimension 210 mm; fixing set No. 5 or No. 7 not included; stainless steel matt brushed.

Dimension Length

A Material Surface VBH Article-No. L Axis A L Stainless steel matt brushed 210 mm 320 mm 315.387 / 6500 Ò?Uwa JÓ

75 Ø 27

greenteQ Pull handle TG 191.ER.GKS greenteQ stainless steel pull handles, for single-sided or pairwise use, on interior and exterior 99 doors. greenteQ pull handle TG 191.ER.GKS; diameter of handle 27 mm; total length 315 mm; dimension 210 mm; fixing set No. 5 or No. 7 not included; stainless steel matt brushed.

A Dimension Length L Material Surface VBH Article-No. Axis A L Stainless steel matt brushed 210 mm 315 mm 315.388 / 6500 Ò?Uxa MÓ

75 Ø 27

greenteQ Fixing set no. 5 greenteQ pull handle fixations for a solid and durable mounting of the pull handles. greenteQ fixing set no. 5 for pull handle; for single-sided, invisible fixing on wooden- or PVC-doors; dimension of thread 8 x 35 mm. For 1 handle with 2 fixing points.

Technical data: • Fixing of handle: single-sided • For pull handles: TG 189.ER.GKS / TG 191.ER.GKS

Material Dimension PU VBH Article-No. Galvanized steel 8 x 35 mm 1 set 360.377 / 0000 ÒD#m eÓ

greenteQ Fixing set no. 7 greenteQ pull handle fixations for a solid and durable mounting of the pull handles. greenteQ fixing set no. 7 for pull handles; for single-sided, invisible fixing on aluminium doors; dimension of thread M8 x 30 mm. For 1 handle with 2 fixing points.

Technical data: • Fixing of handle: single-sided • For pull handles: TG 189.ER.GKS / TG 191.ER.GKS

Material Dimension PU VBH Article-No. Galvanized steel M8 x 30 mm 1 set 360.378 / 0000 ÒD#n hÓ

28 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Pull handles greenteQ stainless steel © VBH DOOR HARDWARE Pull handle systems greenteQ greenteQ Stainless steel round tube without stilts greenteQ pull handle system to manufacture pull handles in individual lenghts. greenteQ pull handle system; round tube; diameter of pipe 35 mm; length of tube 2,000 mm or 3,000 mm; without stilts; stainless steel matt brushed.

Technical data: • Diameter of tube: 35 mm • Material thickness: 1.5 mm

Material Surface Length L PU VBH Article-No. Stainless steel matt brushed 2,000 mm 1 piece 321.924 / 6500 Ò@38a ÈÓ Stainless steel matt brushed 3,000 mm 1 piece 959.585 / 6500 ÒÈÈua qÓ

greenteQ Galvanized steel tube square greenteQ pull handle system to manufacture pull handles in individual lenghts. 20 greenteQ pull handle system of stainless steel; steel reinforcement profile 20 x 20 x 2 20 mm, length of tube 2,000 mm or 3,000 mm, galvanized steel; spacing sleeve round with fixing screw, diameter 31.5 mm, plastic.

Material Surface Length L PU VBH Article-No. Steel galvanized 2,000 mm 1 piece 372.444 / 4010 ÒE8LH*1Ó Steel galvanized 3,000 mm 1 piece 959.586 / 4010 ÒÈÈvH*BÓ

greenteQ Spacing sleeve round

With fixing screw. For steel reinforcement profile, mount at an interval of 350 mm.

Material PU VBH Article-No. Plastic 100 pieces 959.592 / 0000 ÒÈÈ| PÓ 31,5 20

dimension A+32 mm length of tube dimensionA

Cut the steel pipe to length: outside pipe length minus dimension A-40 mm 100 mm. Spread and secure the spacer sleeves to the length of tube steel pipe atadistance of 350 mm and then install. dimension A

dimension A-108 mm Accessories for door handles reinforcing, which are used on the length of tube heavily used doors or haveameasure A between 1.500-2.100 mm. dimensionA

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 29 © VBH Pull handle systems greenteQ DOOR HARDWARE Pull handle systems greenteQ greenteQ Straight bracket greenteQ pull handle system to manufacture 57,5 4 pull handles in individual lenghts. 20 greenteQ pull handle system; straight bracket; 35 35 inward angled mounting strap; stainless steel matt brushed.

Material Surface Direction PU VBH Article-No. Stainless steel matt brushed straight 1 piece 959.590 / 6500 ÒÈÈza ÉÓ

greenteQ 45° angle bracket greenteQ pull handle system to manufacture pull handles in individual lenghts. 4 57,5 40 greenteQ pull handle system; 45 °angle 71 bracket; inward angled mounting strap; 20 35 stainless steel matt brushed.

Material Surface Direction PU VBH Article-No. Stainless steel matt brushed left 1 piece 993.943 / 6501 ÒÌGKa!ZÓ Stainless steel matt brushed right 1 piece 993.940 / 6502 ÒÌGHa"VÓ

greenteQ Bracket fastening greenteQ pull handle system to manufacture pull handles in individual lenghts. greenteQ pull handle system; bracket fastening; dome nut of stainless steel M8; steel stud for timber fixing M8 x 40 mm, blank.

Description Material Surface PU VBH Article-No. Steel stud for timber fixing Steel blank 1 piece 864.494 / 0000 ÒvL~ NÓ Dome nut Stainless steel matt brushed 1 piece 355.667 / 6500 ÒCXca ÈÓ

30 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Pull handle systems greenteQ © VBH DOOR HARDWARE Lever handles for framed doors Stainless steel greenteQ DG 58.ER.SS PZ 92

The greenteQ lever handle set for framed doors DG 58.ERL.SS PZ 92 is made of stainless steel and has a plate of 35 mm width. The lever handle set is PZ perforated with a distance of 92 mm. Lever handles are fixed/ pivoted and have a spring mechanism. The greenteQ lever handle set for framed doors DG 58.ER.SS PZ 92 is prepared with an 8 mm square spindle. The outer lever handle has lugs on backplates and the fixing is made by means of invisible screw connection which needs a separate set of accessories (3 screws M6, 1 square spindle 8 mm).

Material Surface Square spindle VBH Article-No. Stainless steel matt brushed for 8 mm 391.931 / 6500 ÒG3?a 4Ó

greenteQ Accessories DG 58.AL.SS

Door thickness PU VBH Article-No. 59 - 65 mm 1 set 391.961 / 5965 ÒG3][aÏÓ 64 - 70 mm 1 set 391.961 / 6470 ÒG3]`fLÓ 69 - 75 mm 1 set 391.961 / 6975 ÒG3]ekyÓ 74 - 80 mm 1 set 391.961 / 7480 ÒG3]jp?Ó 79 - 85 mm 1 set 391.961 / 7985 ÒG3]oulÓ 89 - 95 mm 1 set 391.961 / 8995 ÒG3]yÈ_Ó

greenteQ DG 58.ER.SSWB PZ 92

The greenteQ lever handle set for framed doors DG 58.ER.SSWB PZ 92 is made of stainless steel and has a plate of 35 mm width. The lever handle set is PZ perforated with a distance of 92 mm. The cranked handle fixed on the outer plate is mountable. The lever handle on the inner plate is fixed/pivoted and have a spring mechanism. The greenteQ lever handle set for framed doors DG 58.ER. SSWB PZ 92 is prepared with an 8 mm square spindle. The outer lever handle has lugs on the backplate and the fixing is made by means of invisible screw connection which needs a separate set of accessories (3 screws M6, 1 square spindle 8 mm).

Material Surface Square spindle VBH Article-No. Stainless steel matt brushed for 8 mm 396.262 / 6500 ÒG^^a ÉÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 31 © VBH Lever handles for framed doors Stainless steel DOOR HARDWARE Lever handles for framed doors Stainless steel greenteQ DG 58.ER.SSWK PZ 92

The greenteQ lever handle set for framed doors DG 58.ER.SSWK PZ 92 is made of stainless steel and has a plate of 35 mm width. The lever handle set is PZ perforated with a distance of 92 mm. The cranked knob fixed on the outer plate is mountable. The lever handle on the inner plate is fixed/pivoted and have a spring mechanism. The greenteQ lever handle set for framed doors DG 58.ER.SSWK PZ 92 is prepared with an 8 mm square spindle. The outer lever handle has lugs on the backplate and the fixing is made by means of invisible screw connection which needs a separate set of accessories (3 screws M6, 1 square spindle 8 mm).

Material Surface Square spindle VBH Article-No. Stainless steel matt brushed for 8 mm 396.261 / 6500 ÒG^]a }Ó

greenteQ Accessories DG 58.AL.SSW

Door thickness PU VBH Article-No. 59 - 65 mm 1 set 396.264 / 5965 ÒG^`[a~Ó 64 - 70 mm 1 set 396.264 / 6470 ÒG^``fDÓ 69 - 75 mm 1 set 396.264 / 6975 ÒG^`ekqÓ 74 - 80 mm 1 set 396.264 / 7480 ÒG^`jp7Ó 79 - 85 mm 1 set 396.264 / 7985 ÒG^`oudÓ

greenteQ DG 58.ER.SS.IN PZ 92

The greenteQ lever handle for framed doors DG 58.ER.SS.IN PZ 92 is made of stainless 10, 5

steel, used as half set for inside and has a 28 plate of 35 m width. The lever handle is PZ perforated with a distance 92 mm. The Lever 60 handle is fixed/pivoted and has a spring mechanism. The greenteQ lever handle for 155 framed doors DG 58.ER.SS.IN PZ 92 is prepared with an 8 mm square spindle. The fixing is made by means of invisible screw connection. 21, 5 97 245 20 92 3 11

Material Surface Square spindle VBH Article-No. Stainless steel matt brushed for 8 mm 396.263 / 6500 ÒG^_a ÌÓ

32 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handles for framed doors Stainless steel © VBH DOOR HARDWARE Lever handles for framed doors Stainless steel greenteQ DG 58.ER.SS.AU PZ 92

The greenteQ lever handle for framed doors DG 58.ER.SS.AU PZ 92 is made ofstainless 10, 5

steel, used as half set for outside und has 28 a plate of 35 mm width. The lever handle is PZ perforated with a distance 92 mm. The 60 lever handle is fixed/pivoted and has a spring mechanism. The greenteQ lever handle for 155 framed doors DG 58.ER.SS.AU PZ 92 is prepared with an 8 mm square spindle and has lugs on the backplate. The fixing is made by means of invisible screw connection. 21, 5 97 20 245 92 3 11

Material Surface Square spindle VBH Article-No. Stainless steel matt brushed for 8 mm 397.582 / 6500 ÒGkra oÓ

greenteQ DG 58.ER.SSB.AU PZ 92

The greenteQ lever handle for framed doors

DG 58.AL.SSB.ER PZ 92 is made of stainless 10, 5 steel, used as half set for outside und has a plate of 35 mm width. The lever handle is PZ perforated with a distance 92 mm. The cranked 63, 5 handle fixed on the outer plate is mountable. 103 The greenteQ lever handle for framed doors DG 58.ER.SSB.AU PZ 92 is prepared with an 8 mm square spindle and has lugs on the backplate. The fixing is made by means of invisible screw connection. 97 122 245 92 3 11

Material Surface Square spindle VBH Article-No. Stainless steel matt brushed for 8 mm 397.584 / 6500 ÒGkta uÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 33 © VBH Lever handles for framed doors Stainless steel DOOR HARDWARE Lever handles for framed doors Stainless steel greenteQ DG 58.ER.SSK.AU PZ 92

The greenteQ lever handle for framed doors

DG 58.ER.SSK.AU PZ 92 is made of stainless 10, 5 steel, used as half set for outside und has a plate of 35 mm width. The lever handle is PZ perforated with a distance 92 mm. The cranked 43, 5 knob fixed on the outer plate is mountable. 91 The greenteQ lever handle for framed doors DG 58.ER.SSK.AU PZ 92 is prepared with an 8 mm square spindle and has lugs on the backplate. The fixing is made by means of invisible screw connection. 97 21, 5 57 245 92 3 11

Material Surface Square spindle VBH Article-No. Stainless steel matt brushed for 8 mm 397.583 / 6500 ÒGksa rÓ

greenteQ Drilling jig set

Material PU VBH Article-No. Plastic with hardened bushes 1 set 396.668 / 0000 ÒGbd dÓ

34 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handles for framed doors Stainless steel © VBH DOOR HARDWARE Lever handle set for framed doors Aluminium greenteQ Lever handle set for framed doors DG 58.AL.SS PZ 92

The greenteQ lever handle set for framed doors DG 58.AL.SS PZ 92 is made of 10, 5

aluminium and has a plate of 35 mm width. 28

The lever handle set is PZ perforated with a 60 distance of 92 mm. Lever handles are fixed/ pivoted and have a spring mechanism. The 155 greenteQ lever handle set for framed doors DG 58.AL.SS is prepared with an 8 mm square spindle. The outer lever handle has lugs on backplates and the fixing is made by means 97 of invisible screw connection which needs a 21, 5 separate set of accessories (3 screws M6, 1 square spindle 8 mm). 245 20 92 3 11

Square Surface Colour code VBH Article-No. spindle silver anodized F1 for 8 mm 391.931 / 0100 ÒG3?! iÓ gold anodized F3 for 8 mm 391.931 / 0300 ÒG3?# qÓ bronze anodized F4 for 8 mm 391.931 / 0400 ÒG3?$ uÓ white coated F9016 for 8 mm 391.931 / 1600 ÒG3?0 >Ó brown coated F8019 for 8 mm 391.931 / 8019 ÒG3?p3hÓ PVD chrome polished PVD-C for 8 mm 391.931 / 4210 ÒG3?J*qÓ PVD gold polished PVD-G for 8 mm 391.931 / 7110 ÒG3?g*~Ó

greenteQ Accessories DG 58.AL.SS

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 35 © VBH Lever handle set for framed doors Aluminium DOOR HARDWARE Lever handle set for framed doors Aluminium greenteQ Lever handle set for framed doors DG 58.AL.SSN PZ 92

The greenteQ lever handle set for framed 10,5 10,5 doors DG 58.AL.SSN PZ 92 is made of 17 28 aluminium and has a plate of 35 mm width. The 20 61 lever handle is PZ perforated with a distance 155 of 92 mm. The lever handle on the outer plate 155 is low. The lever handle on the inner plate is fixed/pivoted and has a spring mechanism. The greenteQ lever handle set for framed

doors DG 58.AL.SSN PZ 92 is prepared with 20 7 an 8 mm square spindle. The outer lever 21,5 handle has lugs on backplates and the fixing is 24 5 20 24 5 made by means of invisible screw connection 92 39 which needs a separate set of accessories (3 11 screws M6, 1 square spindle 8 mm).

Square Surface Colour code VBH Article-No. spindle silver anodized F1 for 8 mm 398.501 / 0100 ÒGu!! ,Ó gold anodized F3 for 8 mm 398.501 / 0300 ÒGu!# 4Ó bronze anodized F4 for 8 mm 398.501 / 0400 ÒGu!$ 8Ó white coated F9016 for 8 mm 398.501 / 1600 ÒGu!0 hÓ brown coated F8019 for 8 mm 398.501 / 8019 ÒGu!p3+Ó PVD chrome polished PVD-C for 8 mm 398.501 / 4210 ÒGu!J*4Ó PVD gold polished PVD-G for 8 mm 398.501 / 7110 ÒGu!g*AÓ

greenteQ Accessories DG 58.AL.SSN

3 screws M6, 1 square spindle 8 mm

Door thickness PU VBH Article-No. 59 - 65 mm 1 set 398.502 / 5965 ÒGu"[aYÓ 64 - 70 mm 1 set 398.502 / 6470 ÒGu"`fÏÓ 69 - 75 mm 1 set 398.502 / 6975 ÒGu"ekLÓ 74 - 80 mm 1 set 398.502 / 7480 ÒGu"jpyÓ 79 - 85 mm 1 set 398.502 / 7985 ÒGu"ou?Ó

36 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handle set for framed doors Aluminium © VBH DOOR HARDWARE Lever handle set for framed doors Aluminium greenteQ Lever handle set for framed doors DG 58.AL.SSWK PZ 92

The greenteQ lever handle set for framed 10, 5 doors DG 58.AL.SSWK PZ 92 is made of 10, 5 aluminium and has a plate of 35 mm width. 28 43, 5 The lever handle set is PZ perforated with a 61 distance of 92 mm. The cranked knob fixed on 91 155 the outer plate is mountable. The lever handle on the inner plate is fixed/pivoted and have a spring mechanism. The greenteQ lever handle set for framed doors DG 58.AL.SSWK PZ 92 is prepared with an 8 mm square spindle. The 97 21,5 outer lever handle has lugs on the backplate 57 245 20 and the fixing is made by means of invisible 92 3

screw connection which needs a separate set 11 of accessories (3 screws M6, 1 square spindle 8 mm). 35

Square Surface Colour code VBH Article-No. spindle silver anodized F1 for 8 mm 396.261 / 0100 ÒG^]! KÓ gold anodized F3 for 8 mm 396.261 / 0300 ÒG^]# SÓ bronze anodized F4 for 8 mm 396.261 / 0400 ÒG^]$ WÓ white coated F9016 for 8 mm 396.261 / 1600 ÒG^]0 Ó brown coated F8019 for 8 mm 396.261 / 8019 ÒG^]p3JÓ PVD chrome polished PVD-C for 8 mm 396.261 / 4210 ÒG^]J*SÓ PVD gold polished PVD-G for 8 mm 396.261 / 7110 ÒG^]g*`Ó

greenteQ Lever handle set for framed doors DG 58.AL.SSWB PZ 92

The greenteQ lever handle set for framed 10, 5 doors DG 58.AL.SSWB PZ 92 is made of 10, 5 aluminium and has a plate of 35 mm width. 28 61 The lever handle set is PZ perforated with a 63, 5 distance of 92 mm. The cranked handle fixed 155 103 on the outer plate is mountable. The lever handle on the inner plate is fixed/pivoted and have a spring mechanism. The greenteQ lever handle set for framed doors DG 58.AL. 97

SSWB PZ 92 is prepared with an 8 mm square 12 2 spindle. The outer lever handle has lugs on 245 20 the backplate and the fixing is made by means 92 3

of invisible screw connection which needs a 11 separate set of accessories (3 screws M6, 1 square spindle 8 mm). 35

Square Surface Colour code VBH Article-No. spindle silver anodized F1 for 8 mm 396.262 / 0100 ÒG^^! NÓ gold anodized F3 for 8 mm 396.262 / 0300 ÒG^^# VÓ bronze anodized F4 for 8 mm 396.262 / 0400 ÒG^^$ ZÓ white coated F9016 for 8 mm 396.262 / 1600 ÒG^^0 #Ó brown coated F8019 for 8 mm 396.262 / 8019 ÒG^^p3MÓ PVD chrome polished PVD-C for 8 mm 396.262 / 4210 ÒG^^J*VÓ PVD gold polished PVD-G for 8 mm 396.262 / 7110 ÒG^^g*cÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 37 © VBH Lever handle set for framed doors Aluminium DOOR HARDWARE Lever handle set for framed doors Aluminium greenteQ Accessories DG 58.AL.SSW

greenteQ Lever handle for framed doors DG 58.AL.SS.IN PZ 92

The greenteQ lever handle for framed doors DG 58.AL.SS.IN PZ 92 is made of aluminium, 10, 5

used as half set for inside and has a plate of 35 28 mm width. The lever handle is PZ perforated 60 with a distance of 92 mm. The lever handle is fixed/pivoted and has a spring mechanism. 155 The greenteQ lever handle for framed doors DG 58.AL.SS.IN PZ 92 is prepared with an 8 mm square spindle. The fixing is made by means of invisible screw connection. 21, 5 97 20 245 92 3 11

Square Surface Colour code VBH Article-No. spindle silver anodized F1 for 8 mm 396.263 / 0100 ÒG^_! QÓ golden anodized F3 for 8 mm 396.263 / 0300 ÒG^_# YÓ bronze anodized F4 for 8 mm 396.263 / 0400 ÒG^_$ ]Ó white coated F9016 for 8 mm 396.263 / 1600 ÒG^_0 &Ó brown coated F8019 for 8 mm 396.263 / 8019 ÒG^_p3PÓ PVD chrome polished PVD-C for 8 mm 396.263 / 4210 ÒG^_J*YÓ PVD gold polished PVD-G for 8 mm 396.263 / 7110 ÒG^_g*fÓ

38 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handle set for framed doors Aluminium © VBH DOOR HARDWARE Lever handle set for framed doors Aluminium greenteQ Lever handle for framed doors DG 58.AL.SS.AU PZ 92

The greenteQ lever handle for framed doors DG 58.AL.SS.AU PZ 92 is made of 10, 5

aluminium, used as half set for outside und 28 has a plate of 35 mm width. The lever handle 60 is PZ perforated with a distance 92 mm. The lever handle is fixed/pivoted and has a spring 155 mechanism. The greenteQ lever handle for framed doors DG 58.AL.SS.AU PZ 92 is prepared with an 8 mm square spindle and has lugs on the backplate. The fixing is made by 21, 5 means of invisible screw connection. 97 20 245 92 3 11

Square Surface Colour code VBH Article-No. spindle silver anodized F1 for 8 mm 397.582 / 0100 ÒGkr! =Ó golden anodized F3 for 8 mm 397.582 / 0300 ÒGkr# EÓ bronze anodized F4 for 8 mm 397.582 / 0400 ÒGkr$ IÓ white coated F9016 for 8 mm 397.582 / 1600 ÒGkr0 yÓ brown coated F8019 for 8 mm 397.582 / 8019 ÒGkrp3<Ó PVD chrome polished PVD-C for 8 mm 397.582 / 4210 ÒGkrJ*EÓ PVD gold polished PVD-G for 8 mm 397.582 / 7110 ÒGkrg*RÓ

greenteQ Lever handle for framed doors DG 58.AL.SSB.AU PZ 92

The greenteQ lever handle for framed doors DG 58.AL.SSB.AU PZ 92 is made of 10, 5 aluminium, used as half set for outside und has a plate of 35 mm width. The lever handle is PZ perforated with a distance 92 mm. The cranked 63, 5 handle fixed on the outer plate is mountable. 103 The greenteQ lever handle for framed doors DG 58.AL.SSB.AU PZ 92 is prepared with an 8 mm square spindle and has lugs on the backplate. The fixing is made by means of invisible screw connection. 97 122 245 92 3 11

Square Surface Colour code VBH Article-No. spindle silver anodized F1 for 8 mm 397.584 / 0100 ÒGkt! CÓ golden anodized F3 for 8 mm 397.584 / 0300 ÒGkt# KÓ bronze anodized F4 for 8 mm 397.584 / 0400 ÒGkt$ OÓ white coated F9016 for 8 mm 397.584 / 1600 ÒGkt0 ÈÓ brown coated F8019 for 8 mm 397.584 / 8019 ÒGktp3BÓ PVD chrome polished PVD-C for 8 mm 397.584 / 4210 ÒGktJ*KÓ PVD gold polished PVD-G for 8 mm 397.584 / 7110 ÒGktg*XÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 39 © VBH Lever handle set for framed doors Aluminium DOOR HARDWARE Lever handle set for framed doors Aluminium greenteQ Lever handle for framed doors DG 58.AL.SSK.AU PZ 92

The greenteQ lever handle for framed

doors DG 58.AL.SSK.AU PZ 92 is made of 10, 5 aluminium, used as half set for outside und has a plate of 35 mm width. The lever handle is PZ perforated with a distance 92 mm. The cranked 43, 5 knob fixed on the outer plate is mountable. 91 The greenteQ lever handle for framed doors DG 58.AL.SSK.AU PZ 92 is prepared with an 8 mm square spindle and has lugs on the backplate. The fixing is made by means of invisible screw connection. 97 21, 5 57 245 92 3 11

Square Surface Colour code VBH Article-No. spindle silver anodized F1 for 8 mm 397.583 / 0100 ÒGks! @Ó golden anodized F3 for 8 mm 397.583 / 0300 ÒGks# HÓ bronze anodized F4 for 8 mm 397.583 / 0400 ÒGks$ LÓ white coated F9016 for 8 mm 397.583 / 1600 ÒGks0 |Ó brown coated F8019 for 8 mm 397.583 / 8019 ÒGksp3?Ó PVD chrome polished PVD-C for 8 mm 397.583 / 4210 ÒGksJ*HÓ PVD gold polished PVD-G for 8 mm 397.583 / 7110 ÒGksg*UÓ

40 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Lever handle set for framed doors Aluminium © VBH DOOR HARDWARE Lever handle set for framed doors Aluminium greenteQ Drilling jig set

Material PU VBH Article-No. Plastic with hardened bushes 1 set 396.668 / 0000 ÒGbd dÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 41 © VBH Lever handle set for framed doors Aluminium DOOR HARDWARE Mortise locks greenteQ RR lock PZ greenteQ mortise locks RR for frame doors are suitable for commercial and residential construction according to EN 12209:2003, Usage Class 3, as well as for use in public 5 YEAR Warranty buildings. greenteQ mortise locks RR fulfil the terms, dimensions, requirements, tests and on the function identification for mortise locks with latches and/or locking bolts of DIN 18251-2. greenteQ mortise locks RR are characterised by high saw-through resistance through the use of two hardened and loosely mounted steel pins in the latch as well as the closed construction of the lock chamber, solidly bolted to the face plate. In addition, greenteQ mortise locks RR are equipped with a high-quality machined face plate with a thickness of 3 mm.

With a bolt extension of 20 mm – single-throw, the greenteQ mortise locks RR offer easy operation and a high level of protection. greenteQ mortise locks RR can be used on the left and right side, due to the reversible latch. The working height of the lock case is 15 mm. greenteQ mortise locks RR are preconfigured for profile cylinders and are certified in accordance with DIN 18252.

Technical data: • Face plate material: Galvanised steel (high corrosion resistance) • Bolt and latch material: Zink die-cast • Lock case material: Sendzimir-galvanised sheet • Follower material: Galvanised steel • Latch: Right/left reversible • Classification key according to EN 12209:2003: Backset 25 mm | 3 | M | 4 | 0 | 0 | F | 4 | H | A | 2 | 0 | Backset 35 - 55 mm | 3 | M | 4 | 0 | 0 | F | 6 | H | A | 2 | 0 |

Face plate Backset Follower PU VBH Article-No. 16 mm 25 mm 8 mm 1 pc. 396.433 / 6500 ÒG`Aa -Ó 16 mm 35 mm 8 mm 1 pc. 396.434 / 6500 ÒG`Ba 0Ó 16 mm 40 mm 8 mm 1 pc. 397.327 / 6500 ÒGi;a -Ó 16 mm 45 mm 8 mm 1 pc. 396.435 / 6500 ÒG`Ca 3Ó 16 mm 55 mm 8 mm 1 pc. 396.436 / 6500 ÒG`Da 6Ó 20 mm 55 mm 8 mm 1 pc. 396.437 / 6500 ÒG`Ea 9Ó 24 mm 25 mm 8 mm 1 pc. 397.751 / 6500 ÒGmSa }Ó 24 mm 35 mm 8 mm 1 pc. 397.752 / 6500 ÒGmTa ÉÓ

10,5 D 18 S

N 11 30 46 270 200

92 8 129 40 40 28

20 15

42 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Mortise locks © VBH DOOR HARDWARE Mortise locks greenteQ RR lock RF PZ greenteQ mortise locks RF with rolling latches for swing doors are suitable for commercial and residential construction according to EN 12209:2003, Usage Class 3, as well as for use in 5 YEAR Warranty public buildings. greenteQ mortise locks RF fulfil the terms, dimensions, requirements, tests on the function and identification for frame mortise locks with latches and/or locking bolts of DIN 18251-2. greenteQ mortise locks RF are characterised by high saw-through resistance through the use of two hardened and loosely mounted steel pins in the latch as well as the closed construction of the lock chamber, solidly bolted to the face plate. In addition, greenteQ mortise locks RF are equipped with a high-quality machined face plate with a thickness of 3 mm.

With a bolt extension of 20 mm – single-throw, greenteQ mortise locks RF offer easy operation and a high level of protection. greenteQ mortise locks RF can be used on the left and right side, due to the reversible latch. The working height of the lock case is 15 mm. greenteQ mortise locks RF are preconfigured for profile cylinders and are certified in accordance with DIN 18252.

Technical data: • Face plate material: Galvanised steel (high corrosion resistance) • Bolt and latch material: Zink die-cast • Lock case material: Sendzimir-galvanised sheet • Follower material: Galvanised steel • Latch: Rolling latch • Classification key according to EN 12209:2003: Backset 25 - 55 mm | 3 | H | 4 | 0 | 0 | F | 6 | H | A | 0 | 0 |

Face plate Backset Follower PU VBH Article-No. 16 mm 25 mm 8 mm 1 pc. 396.443 / 6500 ÒG`Ka KÓ 16 mm 35 mm 8 mm 1 pc. 396.444 / 6500 ÒG`La NÓ 16 mm 40 mm 8 mm 1 pc. 397.329 / 6500 ÒGi=a 3Ó 16 mm 45 mm 8 mm 1 pc. 396.445 / 6500 ÒG`Ma QÓ 16 mm 55 mm 8 mm 1 pc. 396.446 / 6500 ÒG`Na TÓ 20 mm 55 mm 8 mm 1 pc. 396.447 / 6500 ÒG`Oa WÓ 24 mm 25 mm 8 mm 1 pc. 397.755 / 6500 ÒGmWa "Ó 24 mm 35 mm 8 mm 1 pc. 397.756 / 6500 ÒGmXa %Ó

4-11 D 18 S

Ø11 30 200 138 270

8 129 40 40 28

20 15

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 43 © VBH Mortise locks DOOR HARDWARE Mortise locks greenteQ RR lock FS PZ greenteQ mortise locks FS for frame doors are suitable for commercial and residential construction according to EN 12209:2003, Usage Class 3, as well as for use in public 5 YEAR Warranty buildings. In addition, greenteQ mortise locks FS are certified according to CE fire protection on the function certificate EN 1634-2. greenteQ mortise locks FS fulfill the terms, dimensions, requirements, tests and identification for mortise locks with latches and/or locking bolts of DIN 18251-2. greenteQ mortise locks FS are characterised by high saw-through resistance through the use of two hardened and loosely mounted steel pins in the latch as well as the closed construction of the lock case, solidly bolted to the face plate. In addition, greenteQ mortise locks FS are equipped with a high-quality machined face plate with a thickness of 3 mm.

With a bolt extension of 20 mm – single-throw, greenteQ mortise locks RR offer easy operation and a high level of protection. greenteQ mortise locks FS can be used on the left and right side, due to the reversible latch. The working height of the lock case is 15 mm. greenteQ mortise locks FS are preconfigured for profile cylinders and are certified in accordance with DIN 18252.

Technical data: • Face plate material: Galvanised steel (high corrosion resistance) • Bolt and latch material: Zink die-cast • Lock case material: Sendzimir-galvanised sheet • Follower material: Galvanised steel • Latch: Right/left reversible • Classification key according to EN 12209:2003 Backset 25 mm | 3 | M | 4 | 1 | 0 | F | 4 | H | A | 2 | 0 | Backset 35 - 55 mm | 3 | M | 4 | 1 | 0 | F | 6 | H | A | 2 | 0 |

Face plate Backset Follower PU VBH Article-No. 24 mm 25 mm 9 mm 1 pc. 397.753 / 6500 ÒGmUa ÌÓ 24 mm 35 mm 9 mm 1 pc. 397.754 / 6500 ÒGmVa ÏÓ 24 mm 40 mm 9 mm 1 pc. 399.126 / 6500 ÒG{:a NÓ 24 mm 45 mm 9 mm 1 pc. 399.127 / 6500 ÒG{;a QÓ

10,5 D 18 S

N 11 30 46 270 200

92 8 129 40 40 28

20 15

EN 1634-2

44 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Mortise locks © VBH DOOR HARDWARE Mortise locks greenteQ Middle locking plate

5,5 Description Direction PU VBH Article-No.

Type 1 left 1 pc. 397.220 / 4011 ÒGh4H+PÓ 39 Type 1 right 1 pc. 397.220 / 4012 ÒGh4H,UÓ 230 Type 2 left 1 pc. 397.316 / 4011 ÒGi0H+FÓ 13 163

Type 2 right 1 pc. 397.316 / 4012 ÒGi0H,KÓ 60 Type 3 left 1 pc. 397.317 / 4011 ÒGi1H+IÓ

71, 5 7 Type 3 right 1 pc. 397.317 / 4012 ÒGi1H,NÓ

Type 4 left 1 pc. 397.318 / 4011 ÒGi2H+LÓ 13,5 20 Type 4 right 1 pc. 397.318 / 4012 ÒGi2H,QÓ 30 Type 5 left 1 pc. 397.319 / 4011 ÒGi3H+OÓ Type 5 right 1 pc. 397.319 / 4012 ÒGi3H,TÓ Type 6 left 1 pc. 397.320 / 4011 ÒGi4H+RÓ Type 6 right 1 pc. 397.320 / 4012 ÒGi4H,WÓ Type 7 left 1 pc. 397.321 / 4011 ÒGi5H+UÓ Type 7 right 1 pc. 397.321 / 4012 ÒGi5H,ZÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 45 © VBH Mortise locks DOOR HARDWARE Multi-point locks greenteQ greenteQ Multi-point lock DB PZ 92mm P4 vz greenteQ offers a wide range of high-quality, lever-handle-operated multi-point locks with additional latches for front doors and side entrances made of plastic or aluminium up to 60 5 YEAR Warranty kg. A high level of basic security is ensured, not just by the stable main lock with a latch and S on the function a locking bolt featuring saw-through resistance, but also by means of steel pin reinforcement. The latch and locking bolt are made from die-cast zinc; the latch has been galvanised and the locking bolt nickel-plated. The additional latches with 4 mushroom rollers or 2 round bolts ensure additional security, allow the door to be tightened powerfully and prevent it from being pried open. The dimensions and security requirements have been tested in accordance with DIN 18251-3. The greenteQ multi-point locks have been preconfigured for installing all profile cylinders certified in accordance with DIN 18252 or EN 1303. The main and additional locking parts are handle operated and ensure an user-friendly mechanism with a built-in oil duct for lubrication. You will also find a profile-based list of all main and ancillary strike plates below.

You get a 5 YEAR WARRANTY on the function. 0 04 2 92 Technical data: • Face plate material: Galvanised steel (high corrossion resistance) • Lockcase material: Galvanised steel (high corrossion resistance) • Mushroom roller material: Galvanised steel (high corrossion resistance) 0 05 • Round bolt material: Galvanised steel (high corrossion resistance) 1 • Operation: lever handle operated • Operation locking: 4 mushroom rollers • Bolt extension: 20 mm (2-tourig) • Latch: DIN RS and LS usable • Bolt: saw-through resistance • Adjustable mushroom rollers: +/- 2 mm

Face plate Backset Follower VBH Article-No. 16 mm 35 mm 8 mm 396.415 / 6500 ÒG`/a ^Ó 16 mm 45 mm 8 mm 396.416 / 6500 ÒG`0a aÓ 20 x 3 mm 65 mm 10 mm 396.417 / 6500 ÒG`1a dÓ

46 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Multi-point locks greenteQ © VBH DOOR HARDWARE Multi-point locks greenteQ greenteQ Additional striking plate P4 greenteQ Additional striking plate for mushroom roller. 30 10

Description PU VBH Article-No. 2 7 Type 1 1 pc. 398.120 / 4010 ÒGq4H*]Ó 10; 14,5 Type 2 1 pc. 398.121 / 4010 ÒGq5H*`Ó Type 3 1 pc. 398.122 / 4010 ÒGq6H*cÓ Type 4 1 pc. 398.123 / 4010 ÒGq7H*fÓ 10 Type 5 1 pc. 398.124 / 4010

ÒGq8H*iÓ 14 54 87 105 Type 6 1 pc. 398.125 / 4010 ÒGq9H*lÓ Type 7 1 pc. 398.126 / 4010 ÒGq:H*oÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 47 © VBH Multi-point locks greenteQ DOOR HARDWARE Multi-point locks greenteQ greenteQ Multi-point lock DB PZ 92mm B2 vz greenteQ offers a wide range of high-quality, lever-handle-operated multi-point locks with S additional latches for front doors and side entrances made of plastic or aluminium up to 60 5 YEAR Warranty kg. A high level of basic security is ensured, not just by the stable main lock with a latch and on the function a locking bolt featuring saw-through resistance, but also by means of steel pin reinforcement. The latch and locking bolt are made from die-cast zinc; the latch has been galvanised and the locking bolt nickel-plated. The additional latches with 4 mushroom rollers or 2 round bolts ensure additional security, allow the door to be tightened powerfully and prevent it from being pried open. The dimensions and security requirements have been tested in accordance with DIN 18251-3. The greenteQ multi-point locks have been preconfigured for installing all profile cylinders certified in accordance with DIN 18252 or EN 1303. The main and additional locking parts are handle operated and ensure an user-friendly mechanism with a built-in oil duct for N lubrication. You will also find a profile-based list of all main and ancillary strike plates below. 0 04 2 2 9 You get a 5 YEAR WARRANTY on the function.

Technical data:

• Face plate material: Galvanised steel (high corrossion resistance) 0 5 0 • Lockcase material: Galvanised steel (high corrossion resistance) 1 • Mushroom roller material: Galvanised steel (high corrossion resistance) • Round bolt material: Galvanised steel (high corrossion resistance) • Operation: lever handle operated • Operation locking: 2 round bolts • Bolt extension: 20 mm (2-tourig) • Latch: DIN RS and LS usable • Bolt: saw-through resistance • Adjustable mushroom rollers: +/- 2 mm

Face plate Backset Follower VBH Article-No. 16 mm 35 mm 8 mm 396.418 / 6500 ÒG`2a gÓ 16 mm 45 mm 8 mm 396.419 / 6500 ÒG`3a jÓ 20 x 3 mm 65 mm 10 mm 396.420 / 6500 ÒG`4a mÓ

48 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Multi-point locks greenteQ © VBH DOOR HARDWARE Multi-point locks greenteQ greenteQ Middle locking plate

5,5 Description Direction PU VBH Article-No.

Type 1 left 1 pc. 397.220 / 4011 ÒGh4H+PÓ 39 Type 1 right 1 pc. 397.220 / 4012 ÒGh4H,UÓ 230 Type 2 left 1 pc. 397.316 / 4011 ÒGi0H+FÓ 13 163

Type 2 right 1 pc. 397.316 / 4012 ÒGi0H,KÓ 60 Type 3 left 1 pc. 397.317 / 4011 ÒGi1H+IÓ

71, 5 7 Type 3 right 1 pc. 397.317 / 4012 ÒGi1H,NÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 49 © VBH Multi-point locks greenteQ DOOR HARDWARE Profile cylinder keyed different greenteQ Profile double cylinder SX GF keyed different greenteQ profile double cylinder SX; standard profil, 6 pin system; emergency function (bilateral opening); certification according to EN 1303 : 2005; drilling protection; core extraction protection; anti-picking; basic length 30/30 mm; deliverable extensions at one side or both sides each by 5 mm possible; supplied with 3 keys; brass matt nickel-plated; keyed different (every cylinder has individual locking).

Technical data: • Material of profile cylinder: brass • Surface: satin nickel-plated • Pins: 6 • Emergency function: yes • Certification acc. to: EN 1303:2005/AC:2008; FZG 2010_01 • Closure: 8-way adjustable • Keys: 3 • Fixing screw: 1 x M5 x 50 mm and 1 x M5 x 80 mm

Keyed alike Length A Length B VBH Article-No. keyed different 30 30 387.487 / 0011 ÒFjw +|Ó C keyed different 30 35 387.488 / 0011 ÒFjx +ÈÓ 9,5 17 keyed different 30 40 387.489 / 0011 ÒFjy +ËÓ keyed different 30 45 387.490 / 0011 ÒFjz +ÎÓ 32,8 keyed different 30 50 387.491 / 0011 ÒFj{ +!Ó M5 R15

keyed different 30 55 387.492 / 0011 ÒFj| +$Ó 30° A B 10 keyed different 30 60 387.493 / 0011 ÒFj} +'Ó keyed different 30 65 395.483 / 0011 ÒGVs +IÓ keyed different 30 70 395.484 / 0011 ÒGVt +LÓ keyed different 30 75 999.990 / 2007 ÒÌÌz4'bÓ keyed different 35 35 387.494 / 0011 ÒFj~ +*Ó keyed different 35 40 387.495 / 0011 ÒFjÈ +-Ó keyed different 35 45 387.496 / 0011 ÒFjÉ +0Ó keyed different 35 50 387.497 / 0011 ÒFjÊ +3Ó keyed different 35 55 387.498 / 0011 ÒFjË +6Ó keyed different 35 60 387.499 / 0011 ÒFjÌ +9Ó keyed different 35 65 387.500 / 0011 ÒFk +GÓ keyed different 35 70 387.501 / 0011 ÒFk! +JÓ keyed different 40 40 387.502 / 0011 ÒFk" +MÓ keyed different 40 45 387.503 / 0011 ÒFk# +PÓ keyed different 40 50 387.504 / 0011 ÒFk$ +SÓ keyed different 40 55 387.505 / 0011 ÒFk% +VÓ keyed different 40 60 387.506 / 0011 ÒFk& +YÓ keyed different 40 65 389.598 / 0011 ÒFÈË +`Ó keyed different 40 70 389.599 / 0011 ÒFÈÌ +cÓ keyed different 45 45 387.507 / 0011 ÒFk' +\Ó keyed different 45 50 387.508 / 0011 ÒFk( +_Ó keyed different 45 55 387.509 / 0011 ÒFk) +bÓ keyed different 45 60 387.510 / 0011 ÒFk* +eÓ keyed different 45 65 387.511 / 0011 ÒFk+ +hÓ keyed different 50 50 387.512 / 0011 ÒFk, +kÓ keyed different 50 55 389.600 / 0011 ÒFÉ +qÓ keyed different 50 60 389.601 / 0011 ÒFÉ! +tÓ

50 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Profile cylinder keyed different © VBH DOOR HARDWARE Profile cylinder keyed different greenteQ Profile knob cylinder SX keyed different greenteQ profile knob cylinder SX; standard profile; 6 pin system; certification according to EN 1303 : 2005; drilling protection; core extraction protection; anti-picking; basic length 30/30 mm; deliverable extensions at one side or both sides each by 5 mm possible; supplied with 3 keys; brass matt nickel-plated; keyed different (every cylinder has individual locking).

keyed different 30 30 389.611 / 0011 32, 8 ÒFÉ+ ++Ó M5 R15 keyed different 30 35 389.612 / 0011 ÒFÉ, +.Ó A B 40 30° keyed different 30 40 389.613 / 0011 ÒFÉ- +1Ó 10 keyed different 30 45 389.614 / 0011 ÒFÉ. +4Ó keyed different 35 30 389.615 / 0011 ÒFÉ/ +7Ó Ø3 0 keyed different 35 35 389.616 / 0011 ÒFÉ0 +:Ó keyed different 35 40 389.617 / 0011 ÒFÉ1 +=Ó keyed different 35 45 389.618 / 0011 ÒFÉ2 +@Ó keyed different 35 50 389.619 / 0011 ÒFÉ3 +CÓ keyed different 35 55 389.620 / 0011 ÒFÉ4 +FÓ keyed different 40 30 389.621 / 0011 ÒFÉ5 +IÓ keyed different 40 35 389.622 / 0011 ÒFÉ6 +LÓ keyed different 40 40 389.623 / 0011 ÒFÉ7 +OÓ keyed different 40 45 389.624 / 0011 ÒFÉ8 +RÓ keyed different 40 50 389.625 / 0011 ÒFÉ9 +UÓ keyed different 40 55 389.626 / 0011 ÒFÉ: +XÓ keyed different 45 30 389.633 / 0011 ÒFÉA +mÓ keyed different 45 35 389.634 / 0011 ÒFÉB +pÓ keyed different 45 40 389.635 / 0011 ÒFÉC +sÓ keyed different 45 45 389.636 / 0011 ÒFÉD +vÓ keyed different 45 50 389.637 / 0011 ÒFÉE +yÓ keyed different 50 35 389.638 / 0011 ÒFÉF +|Ó keyed different 50 40 389.639 / 0011 ÒFÉG +ÈÓ keyed different 50 45 389.640 / 0011 ÒFÉH +ËÓ keyed different 50 50 389.641 / 0011 ÒFÉI +ÎÓ keyed different 55 35 389.642 / 0011 ÒFÉJ +!Ó keyed different 55 40 389.643 / 0011 ÒFÉK +$Ó keyed different 60 40 389.644 / 0011 ÒFÉL +'Ó keyed different 60 45 396.524 / 0011 ÒGa8 +|Ó keyed different 65 40 389.645 / 0011 ÒFÉM +*Ó

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 51 © VBH Profile cylinder keyed different DOOR HARDWARE Profile cylinder keyed different greenteQ Profile half cylinder SX 8-F keyed different greenteQ profile half cylinder SX 8-F are made off brass matt nickel-plated and the standard cylinder has a 6 pin system. They are tested and certified according to EN 1303:2005/ AC:2008, have an 8-fold adjustable cam and have a drilling protection, core extraction protection as well as anti-picking. The basic length of the greenteQ profile half cylinders SX 8-F is 30 mm; available extensions at one side by 5 mm are possible. The cylinders are delivered with 3 keys. greenteQ profile half cylinders SX 8-F are keyed different (every cylinder has individual locking. The 3 keys delivered with the cylinder aren´t useable for other cylinders) or keyed alike (all cylinders with the same locking could be opened or closed with one key). If needed key blank for keyed different cylinders or keys for keyed alike cylinders are available.

Instruction manual for the 8-fold adjustable cam: New functionality of greenteQ profile half cylinder SX 8-F: The lock cam is at an angle of 45° 8-fold adjustable, so that the cylinder is usable in various installation situations (lockable window handles, key switch etc.). This is how it works: Press the thrust bolt on the back of the cylinder with a pointed object (key, fixing screw etc.); turn the lock cam in the desired position; release the thrust bolt; the thrust bolt engages then 9,5 17 automatically.

Technical data: 32, 8 R15 • Material of profile cylinder: brass M5 • Surface: satin nickel-plated • Pins: 6 10 A 10 • Emergency function: yes • Certification acc. to: EN 1303:2005/AC:2008; FZG 2010_01 • Closure: 8-way adjustable • Keys: 3 • Fixing screw: 1 x M5 x 50 mm and 1 x M5 x 80 mm

Keyed alike Length A VBH Article-No. keyed different 30 392.794 / 0011 ÒG;~ +4Ó keyed different 55 395.476 / 0011 ÒGVl +4Ó keyed different 60 395.477 / 0011 ÒGVm +7Ó keyed different 65 395.478 / 0011 ÒGVn +:Ó keyed different 70 395.479 / 0011 ÒGVo +=Ó keyed different 35 392.795 / 0011 ÒG;È +7Ó keyed different 40 392.796 / 0011 ÒG;É +:Ó keyed different 45 392.797 / 0011 ÒG;Ê +=Ó keyed different 50 392.798 / 0011 ÒG;Ë +@Ó

greenteQ Key blank greenteQ key blank for greenteQ profile double cylinder SX, SX greenteQ profile half-cylinder 8-F, greenteQ Profile knob cylinder SX.

Description PU VBH Article-No. Key blank 1 pc. 388.678 / 0000 ÒFvn BÓ Key blank -milled- 1 pc. 391.872 / 0000 ÒG2h wÓ

52 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Profile cylinder keyed different © VBH DOOR HARDWARE Profile cylinder keyed alike No. 1 greenteQ Profile double cylinder SX GF Keyed alike No. 1 greenteQ profile double cylinder SX; standard profil, 6 pin system; emergency function (bilateral opening); certification according to EN 1303 : 2005; drilling protection; core extraction protection; anti-picking; basic length 30/30 mm; deliverable extensions at one side or both sides each by 5 mm possible; supplied with 3 keys; brass matt nickel-plated.

Keyed alike Length A Length B VBH Article-No. keyed alike No. 1 30 30 387.487 / 0001 ÒFjw !JÓ C keyed alike No. 1 30 35 387.488 / 0001 ÒFjx !MÓ 9,5 17 keyed alike No. 1 30 40 387.489 / 0001 ÒFjy !PÓ keyed alike No. 1 30 45 387.490 / 0001 ÒFjz !SÓ 32,8 keyed alike No. 1 30 50 387.491 / 0001 ÒFj{ !VÓ M5 R15

keyed alike No. 1 30 55 387.492 / 0001 ÒFj| !YÓ 30° A B 10 keyed alike No. 1 30 60 387.493 / 0001 ÒFj} !\Ó keyed alike No. 1 30 65 395.483 / 0001 ÒGVs !~Ó keyed alike No. 1 30 70 395.484 / 0001 ÒGVt !ÊÓ keyed alike No. 1 30 75 999.990 / 2024 ÒÌÌz48PÓ keyed alike No. 1 35 35 387.494 / 0001 ÒFj~ !_Ó keyed alike No. 1 35 40 387.495 / 0001 ÒFjÈ !bÓ keyed alike No. 1 35 45 387.496 / 0001 ÒFjÉ !eÓ keyed alike No. 1 35 50 387.497 / 0001 ÒFjÊ !hÓ keyed alike No. 1 35 55 387.498 / 0001 ÒFjË !kÓ keyed alike No. 1 35 60 387.499 / 0001 ÒFjÌ !nÓ keyed alike No. 1 35 65 387.500 / 0001 ÒFk !|Ó keyed alike No. 1 35 70 387.501 / 0001 ÒFk! !ÈÓ keyed alike No. 1 40 40 387.502 / 0001 ÒFk" !ËÓ keyed alike No. 1 40 45 387.503 / 0001 ÒFk# !ÎÓ keyed alike No. 1 40 50 387.504 / 0001 ÒFk$ !!Ó keyed alike No. 1 40 55 387.505 / 0001 ÒFk% !$Ó keyed alike No. 1 40 60 387.506 / 0001 ÒFk& !'Ó keyed alike No. 1 40 65 389.598 / 0001 ÒFÈË !.Ó keyed alike No. 1 40 70 389.599 / 0001 ÒFÈÌ !1Ó keyed alike No. 1 45 45 387.507 / 0001 ÒFk' !*Ó keyed alike No. 1 45 50 387.508 / 0001 ÒFk( !-Ó keyed alike No. 1 45 55 387.509 / 0001 ÒFk) !0Ó keyed alike No. 1 45 60 387.510 / 0001 ÒFk* !3Ó keyed alike No. 1 45 65 387.511 / 0001 ÒFk+ !6Ó keyed alike No. 1 50 50 387.512 / 0001 ÒFk, !9Ó keyed alike No. 1 50 55 389.600 / 0001 ÒFÉ !?Ó keyed alike No. 1 50 60 389.601 / 0001 ÒFÉ! !BÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 53 © VBH Profile cylinder keyed alike No. 1 DOOR HARDWARE Profile cylinder keyed alike No. 1 greenteQ Profile knob cylinder SX keyed alike No. 1 greenteQ profile knob cylinder SX; standard profile; 6 pin system; certification according to EN 1303 : 2005; drilling protection; core extraction protection; anti-picking; basic length 30/30 mm; deliverable extensions at one side or both sides each by 5 mm possible; supplied with 3 keys; brass matt nickel-plated.

keyed alike No. 1 30 30 389.611 / 0001 32, 8 ÒFÉ+ !`Ó M5 R15 keyed alike No. 1 30 35 389.612 / 0001 ÒFÉ, !cÓ A B 40 30° keyed alike No. 1 30 40 389.613 / 0001 ÒFÉ- !fÓ 10 keyed alike No. 1 30 45 389.614 / 0001 ÒFÉ. !iÓ keyed alike No. 1 35 30 389.615 / 0001 ÒFÉ/ !lÓ Ø3 0 keyed alike No. 1 35 35 389.616 / 0001 ÒFÉ0 !oÓ keyed alike No. 1 35 40 389.617 / 0001 ÒFÉ1 !rÓ keyed alike No. 1 35 45 389.618 / 0001 ÒFÉ2 !uÓ keyed alike No. 1 35 50 389.619 / 0001 ÒFÉ3 !xÓ keyed alike No. 1 35 55 389.620 / 0001 ÒFÉ4 !{Ó keyed alike No. 1 40 30 389.621 / 0001 ÒFÉ5 !~Ó keyed alike No. 1 40 35 389.622 / 0001 ÒFÉ6 !ÊÓ keyed alike No. 1 40 40 389.623 / 0001 ÒFÉ7 !ÍÓ keyed alike No. 1 40 45 389.624 / 0001 ÒFÉ8 ! Ó keyed alike No. 1 40 50 389.625 / 0001 ÒFÉ9 !#Ó keyed alike No. 1 40 55 389.626 / 0001 ÒFÉ: !&Ó keyed alike No. 1 45 30 389.633 / 0001 ÒFÉA !;Ó keyed alike No. 1 45 35 389.634 / 0001 ÒFÉB !>Ó keyed alike No. 1 45 40 389.635 / 0001 ÒFÉC !AÓ keyed alike No. 1 45 45 389.636 / 0001 ÒFÉD !DÓ keyed alike No. 1 45 50 389.637 / 0001 ÒFÉE !GÓ keyed alike No. 1 50 35 389.638 / 0001 ÒFÉF !JÓ keyed alike No. 1 50 40 389.639 / 0001 ÒFÉG !MÓ keyed alike No. 1 50 45 389.640 / 0001 ÒFÉH !PÓ keyed alike No. 1 50 50 389.641 / 0001 ÒFÉI !SÓ keyed alike No. 1 55 35 389.642 / 0001 ÒFÉJ !VÓ keyed alike No. 1 55 40 389.643 / 0001 ÒFÉK !YÓ keyed alike No. 1 60 40 389.644 / 0001 ÒFÉL !\Ó keyed alike No. 1 60 45 396.524 / 0001 ÒGa8 !JÓ keyed alike No. 1 65 40 389.645 / 0001 ÒFÉM !_Ó

54 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Profile cylinder keyed alike No. 1 © VBH DOOR HARDWARE Profile cylinder keyed alike No. 1 greenteQ Profile half cylinder SX 8-F keyed alike No. 1 greenteQ profile half cylinder SX 8-F are made off brass matt nickel-plated and the standard cylinder has a 6 pin system. They are tested and certified according to EN 1303:2005/ AC:2008, have an 8-fold adjustable cam and have a drilling protection, core extraction protection as well as anti-picking. The basic length of the greenteQ profile half cylinders SX 8-F is 30 mm; available extensions at one side by 5 mm are possible. The cylinders are delivered with 3 keys. Instruction manual for the 8-fold adjustable cam: New functionality of greenteQ profile half cylinder SX 8-F: The lock cam is at an angle of 45° 8-fold adjustable, so that the cylinder is usable in various installation situations (lockable window handles, key switch etc.). This is how it works: Press the thrust bolt on the back of the cylinder with a pointed object (key, fixing screw etc.); turn the lock cam in the desired position; release the thrust bolt; the thrust bolt engages then automatically.

Technical data: • Material of profile cylinder: brass • Surface: satin nickel-plated 9,5 17 • Pins: 6 • Emergency function: yes • Certification acc. to: EN 1303:2005/AC:2008; FZG 2010_01 32, 8 R15 • Closure: 8-way adjustable M5 • Keys: 3 • Fixing screw: 1 x M5 x 50 mm and 1 x M5 x 80 mm 10 A 10

Keyed alike Length A VBH Article-No. keyed alike No. 1 30 392.794 / 0001 ÒG;~ !iÓ keyed alike No. 1 35 392.795 / 0001 ÒG;È !lÓ keyed alike No. 1 40 392.796 / 0001 ÒG;É !oÓ keyed alike No. 1 45 392.797 / 0001 ÒG;Ê !rÓ keyed alike No. 1 50 392.798 / 0001 ÒG;Ë !uÓ keyed alike No. 1 55 395.476 / 0001 ÒGVl !iÓ keyed alike No. 1 60 395.477 / 0001 ÒGVm !lÓ keyed alike No. 1 65 395.478 / 0001 ÒGVn !oÓ keyed alike No. 1 70 395.479 / 0001 ÒGVo !rÓ

greenteQ Additional change key keyed alike No. 1 greenteQ additional change key for greenteQ profile double cylinder SX, SX greenteQ profile half-cylinder 8-F, greenteQ Profile knob cylinder SX.

Keyed alike PU VBH Article-No. keyed alike No. 1 1 pc. 389.646 / 0001 ÒFÉN !bÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 55 © VBH Profile cylinder keyed alike No. 1 DOOR HARDWARE Profile cylinder keyed alike No. 2 greenteQ Profile double cylinder SX GF Keyed alike No. 2 greenteQ profile double cylinder SX; standard profil, 6 pin system; emergency function (bilateral opening); certification according to EN 1303 : 2005; drilling protection; core extraction protection; anti-picking; basic length 30/30 mm; deliverable extensions at one side or both sides each by 5 mm possible; supplied with 3 keys; brass matt nickel-plated.

Keyed alike Length A Length B VBH Article-No. keyed alike No. 2 30 30 387.487 / 0002 ÒFjw "OÓ C keyed alike No. 2 30 35 387.488 / 0002 ÒFjx "RÓ 9,5 17 keyed alike No. 2 30 40 387.489 / 0002 ÒFjy "UÓ keyed alike No. 2 30 45 387.490 / 0002 ÒFjz "XÓ 32,8 keyed alike No. 2 30 50 387.491 / 0002 ÒFj{ "[Ó M5 R15

keyed alike No. 2 30 55 387.492 / 0002 ÒFj| "^Ó 30° A B 10 keyed alike No. 2 30 60 387.493 / 0002 ÒFj} "aÓ keyed alike No. 2 30 65 395.483 / 0002 ÒGVs "ÌÓ keyed alike No. 2 30 70 395.484 / 0002 ÒGVt "ÏÓ keyed alike No. 2 30 75 999.990 / 2025 ÒÌÌz49UÓ keyed alike No. 2 35 35 387.494 / 0002 ÒFj~ "dÓ keyed alike No. 2 35 40 387.495 / 0002 ÒFjÈ "gÓ keyed alike No. 2 35 45 387.496 / 0002 ÒFjÉ "jÓ keyed alike No. 2 35 50 387.497 / 0002 ÒFjÊ "mÓ keyed alike No. 2 35 55 387.498 / 0002 ÒFjË "pÓ keyed alike No. 2 35 60 387.499 / 0002 ÒFjÌ "sÓ keyed alike No. 2 35 65 387.500 / 0002 ÒFk "ÊÓ keyed alike No. 2 35 70 387.501 / 0002 ÒFk! "ÍÓ keyed alike No. 2 40 40 387.502 / 0002 ÒFk" " Ó keyed alike No. 2 40 45 387.503 / 0002 ÒFk# "#Ó keyed alike No. 2 40 50 387.504 / 0002 ÒFk$ "&Ó keyed alike No. 2 40 55 387.505 / 0002 ÒFk% ")Ó keyed alike No. 2 40 60 387.506 / 0002 ÒFk& ",Ó keyed alike No. 2 40 65 389.598 / 0002 ÒFÈË "3Ó keyed alike No. 2 40 70 389.599 / 0002 ÒFÈÌ "6Ó keyed alike No. 2 45 45 387.507 / 0002 ÒFk' "/Ó keyed alike No. 2 45 50 387.508 / 0002 ÒFk( "2Ó keyed alike No. 2 45 55 387.509 / 0002 ÒFk) "5Ó keyed alike No. 2 45 60 387.510 / 0002 ÒFk* "8Ó keyed alike No. 2 45 65 387.511 / 0002 ÒFk+ ";Ó keyed alike No. 2 50 50 387.512 / 0002 ÒFk, ">Ó keyed alike No. 2 50 55 389.600 / 0002 ÒFÉ "DÓ keyed alike No. 2 50 60 389.601 / 0002 ÒFÉ! "GÓ

56 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Profile cylinder keyed alike No. 2 © VBH DOOR HARDWARE Profile cylinder keyed alike No. 2 greenteQ Profile knob cylinder SX keyed alike No. 2 greenteQ profile knob cylinder SX; standard profile; 6 pin system; certification according to EN 1303 : 2005; drilling protection; core extraction protection; anti-picking; basic length 30/30 mm; deliverable extensions at one side or both sides each by 5 mm possible; supplied with 3 keys; brass matt nickel-plated.

keyed alike No. 2 30 30 389.611 / 0002 32, 8 ÒFÉ+ "eÓ M5 R15 keyed alike No. 2 30 35 389.612 / 0002 ÒFÉ, "hÓ A B 40 30° keyed alike No. 2 30 40 389.613 / 0002 ÒFÉ- "kÓ 10 keyed alike No. 2 30 45 389.614 / 0002 ÒFÉ. "nÓ keyed alike No. 2 35 30 389.615 / 0002 ÒFÉ/ "qÓ Ø3 0 keyed alike No. 2 35 35 389.616 / 0002 ÒFÉ0 "tÓ keyed alike No. 2 35 40 389.617 / 0002 ÒFÉ1 "wÓ keyed alike No. 2 35 45 389.618 / 0002 ÒFÉ2 "zÓ keyed alike No. 2 35 50 389.619 / 0002 ÒFÉ3 "}Ó keyed alike No. 2 35 55 389.620 / 0002 ÒFÉ4 "ÉÓ keyed alike No. 2 40 30 389.621 / 0002 ÒFÉ5 "ÌÓ keyed alike No. 2 40 35 389.622 / 0002 ÒFÉ6 "ÏÓ keyed alike No. 2 40 40 389.623 / 0002 ÒFÉ7 ""Ó keyed alike No. 2 40 45 389.624 / 0002 ÒFÉ8 "%Ó keyed alike No. 2 40 50 389.625 / 0002 ÒFÉ9 "(Ó keyed alike No. 2 40 55 389.626 / 0002 ÒFÉ: "+Ó keyed alike No. 2 45 30 389.633 / 0002 ÒFÉA "@Ó keyed alike No. 2 45 35 389.634 / 0002 ÒFÉB "CÓ keyed alike No. 2 45 40 389.635 / 0002 ÒFÉC "FÓ keyed alike No. 2 45 45 389.636 / 0002 ÒFÉD "IÓ keyed alike No. 2 45 50 389.637 / 0002 ÒFÉE "LÓ keyed alike No. 2 50 35 389.638 / 0002 ÒFÉF "OÓ keyed alike No. 2 50 40 389.639 / 0002 ÒFÉG "RÓ keyed alike No. 2 50 45 389.640 / 0002 ÒFÉH "UÓ keyed alike No. 2 50 50 389.641 / 0002 ÒFÉI "XÓ keyed alike No. 2 55 35 389.642 / 0002 ÒFÉJ "[Ó keyed alike No. 2 55 40 389.643 / 0002 ÒFÉK "^Ó keyed alike No. 2 60 40 389.644 / 0002 ÒFÉL "aÓ keyed alike No. 2 60 45 396.524 / 0002 ÒGa8 "OÓ keyed alike No. 2 65 40 389.645 / 0002 ÒFÉM "dÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 57 © VBH Profile cylinder keyed alike No. 2 DOOR HARDWARE Profile cylinder keyed alike No. 2 greenteQ Profile half cylinder SX 8-F keyed alike No. 2 greenteQ profile half cylinder SX 8-F are made off brass matt nickel-plated and the standard cylinder has a 6 pin system. They are tested and certified according to EN 1303:2005/ AC:2008, have an 8-fold adjustable cam and have a drilling protection, core extraction protection as well as anti-picking. The basic length of the greenteQ profile half cylinders SX 8-F is 30 mm; available extensions at one side by 5 mm are possible. The cylinders are delivered with 3 keys.

Technical data: • Material of profile cylinder: brass 9,5 17 • Surface: satin nickel-plated • Pins: 6 • Emergency function: yes 32, 8 R15 • Certification acc. to: EN 1303:2005/AC:2008; FZG 2010_01 M5 • Closure: 8-way adjustable • Keys: 3 10 A 10 • Fixing screw: 1 x M5 x 50 mm and 1 x M5 x 80 mm

Keyed alike Length A VBH Article-No. keyed alike No. 2 30 392.794 / 0002 ÒG;~ "nÓ keyed alike No. 2 35 392.795 / 0002 ÒG;È "qÓ keyed alike No. 2 40 392.796 / 0002 ÒG;É "tÓ keyed alike No. 2 45 392.797 / 0002 ÒG;Ê "wÓ keyed alike No. 2 50 392.798 / 0002 ÒG;Ë "zÓ keyed alike No. 2 55 395.476 / 0002 ÒGVl "nÓ keyed alike No. 2 60 395.477 / 0002 ÒGVm "qÓ keyed alike No. 2 65 395.478 / 0002 ÒGVn "tÓ keyed alike No. 2 70 395.479 / 0002 ÒGVo "wÓ

greenteQ Additional change key keyed alike No. 2 greenteQ additional change key for greenteQ profile double cylinder SX, SX greenteQ profile half-cylinder 8-F, greenteQ Profile knob cylinder SX.

Keyed alike PU VBH Article-No. keyed alike No. 2 1 pc. 389.646 / 0002 ÒFÉN "gÓ

58 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Profile cylinder keyed alike No. 2 © VBH DOOR HARDWARE Profile cylinder keyed alike No. 3 greenteQ Profile double cylinder SX GF Keyed alike No. 3 greenteQ profile double cylinder SX; standard profil, 6 pin system; emergency function (bilateral opening); certification according to EN 1303 : 2005; drilling protection; core extraction protection; anti-picking; basic length 30/30 mm; deliverable extensions at one side or both sides each by 5 mm possible; supplied with 3 keys; brass matt nickel-plated.

Keyed alike Length A Length B VBH Article-No. keyed alike No. 3 30 30 387.487 / 0003 ÒFjw #TÓ C keyed alike No. 3 30 35 387.488 / 0003 ÒFjx #WÓ 9,5 17 keyed alike No. 3 30 40 387.489 / 0003 ÒFjy #ZÓ keyed alike No. 3 30 45 387.490 / 0003 ÒFjz #]Ó 32,8 keyed alike No. 3 30 50 387.491 / 0003 ÒFj{ #`Ó M5 R15

keyed alike No. 3 30 55 387.492 / 0003 ÒFj| #cÓ 30° A B 10 keyed alike No. 3 30 60 387.493 / 0003 ÒFj} #fÓ keyed alike No. 3 30 65 395.483 / 0003 ÒGVs #!Ó keyed alike No. 3 30 70 395.484 / 0003 ÒGVt #$Ó keyed alike No. 3 30 75 999.990 / 2026 ÒÌÌz4:ZÓ keyed alike No. 3 35 35 387.494 / 0003 ÒFj~ #iÓ keyed alike No. 3 35 40 387.495 / 0003 ÒFjÈ #lÓ keyed alike No. 3 35 45 387.496 / 0003 ÒFjÉ #oÓ keyed alike No. 3 35 50 387.497 / 0003 ÒFjÊ #rÓ keyed alike No. 3 35 55 387.498 / 0003 ÒFjË #uÓ keyed alike No. 3 35 60 387.499 / 0003 ÒFjÌ #xÓ keyed alike No. 3 35 65 387.500 / 0003 ÒFk #ÏÓ keyed alike No. 3 35 70 387.501 / 0003 ÒFk! #"Ó keyed alike No. 3 40 40 387.502 / 0003 ÒFk" #%Ó keyed alike No. 3 40 45 387.503 / 0003 ÒFk# #(Ó keyed alike No. 3 40 50 387.504 / 0003 ÒFk$ #+Ó keyed alike No. 3 40 55 387.505 / 0003 ÒFk% #.Ó keyed alike No. 3 40 60 387.506 / 0003 ÒFk& #1Ó keyed alike No. 3 40 65 389.598 / 0003 ÒFÈË #8Ó keyed alike No. 3 40 70 389.599 / 0003 ÒFÈÌ #;Ó keyed alike No. 3 45 45 387.507 / 0003 ÒFk' #4Ó keyed alike No. 3 45 50 387.508 / 0003 ÒFk( #7Ó keyed alike No. 3 45 55 387.509 / 0003 ÒFk) #:Ó keyed alike No. 3 45 60 387.510 / 0003 ÒFk* #=Ó keyed alike No. 3 45 65 387.511 / 0003 ÒFk+ #@Ó keyed alike No. 3 50 50 387.512 / 0003 ÒFk, #CÓ keyed alike No. 3 50 55 389.600 / 0003 ÒFÉ #IÓ keyed alike No. 3 50 60 389.601 / 0003 ÒFÉ! #LÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 59 © VBH Profile cylinder keyed alike No. 3 DOOR HARDWARE Profile cylinder keyed alike No. 3 greenteQ Profile knob cylinder SX keyed alike No. 3 greenteQ profile knob cylinder SX; standard profile; 6 pin system; certification according to EN 1303 : 2005; drilling protection; core extraction protection; anti-picking; basic length 30/30 mm; deliverable extensions at one side or both sides each by 5 mm possible; supplied with 3 keys; brass matt nickel-plated.

Keyed alike Length A Length B VBH Article-No. keyed alike No. 3 30 30 389.611 / 0003 ÒFÉ+ #jÓ 9,5 17 keyed alike No. 3 30 35 389.612 / 0003 ÒFÉ, #mÓ keyed alike No. 3 30 40 389.613 / 0003 ÒFÉ- #pÓ 32, 8 keyed alike No. 3 30 45 389.614 / 0003 ÒFÉ. #sÓ M5 R15

keyed alike No. 3 35 30 389.615 / 0003 ÒFÉ/ #vÓ A B 40 30° 10 keyed alike No. 3 35 35 389.616 / 0003 ÒFÉ0 #yÓ keyed alike No. 3 35 40 389.617 / 0003 ÒFÉ1 #|Ó Ø3 0 keyed alike No. 3 35 45 389.618 / 0003 ÒFÉ2 #ÈÓ keyed alike No. 3 35 50 389.619 / 0003 ÒFÉ3 #ËÓ keyed alike No. 3 35 55 389.620 / 0003 ÒFÉ4 #ÎÓ keyed alike No. 3 40 30 389.621 / 0003 ÒFÉ5 #!Ó keyed alike No. 3 40 35 389.622 / 0003 ÒFÉ6 #$Ó keyed alike No. 3 40 40 389.623 / 0003 ÒFÉ7 #'Ó keyed alike No. 3 40 45 389.624 / 0003 ÒFÉ8 #*Ó keyed alike No. 3 40 50 389.625 / 0003 ÒFÉ9 #-Ó keyed alike No. 3 40 55 389.626 / 0003 ÒFÉ: #0Ó keyed alike No. 3 45 30 389.633 / 0003 ÒFÉA #EÓ keyed alike No. 3 45 35 389.634 / 0003 ÒFÉB #HÓ keyed alike No. 3 45 40 389.635 / 0003 ÒFÉC #KÓ keyed alike No. 3 45 45 389.636 / 0003 ÒFÉD #NÓ keyed alike No. 3 45 50 389.637 / 0003 ÒFÉE #QÓ keyed alike No. 3 50 35 389.638 / 0003 ÒFÉF #TÓ keyed alike No. 3 50 40 389.639 / 0003 ÒFÉG #WÓ keyed alike No. 3 50 45 389.640 / 0003 ÒFÉH #ZÓ keyed alike No. 3 50 50 389.641 / 0003 ÒFÉI #]Ó keyed alike No. 3 55 35 389.642 / 0003 ÒFÉJ #`Ó keyed alike No. 3 55 40 389.643 / 0003 ÒFÉK #cÓ keyed alike No. 3 60 40 389.644 / 0003 ÒFÉL #fÓ keyed alike No. 3 60 45 396.524 / 0003 ÒGa8 #TÓ keyed alike No. 3 65 40 389.645 / 0003 ÒFÉM #iÓ

60 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Profile cylinder keyed alike No. 3 © VBH DOOR HARDWARE Profile cylinder keyed alike No. 3 greenteQ Profile half cylinder SX 8-F keyed alike No. 3 greenteQ profile half cylinder SX 8-F are made off brass matt nickel-plated and the standard cylinder has a 6 pin system. They are tested and certified according to EN 1303:2005/ AC:2008, have an 8-fold adjustable cam and have a drilling protection, core extraction protection as well as anti-picking. The basic length of the greenteQ profile half cylinders SX 8-F is 30 mm; available extensions at one side by 5 mm are possible. The cylinders are delivered with 3 keys. Instruction manual for the 8-fold adjustable cam: New functionality of greenteQ profile half cylinder SX 8-F: The lock cam is at an angle of 45° 8-fold adjustable, so that the cylinder is usable in various installation situations (lockable window handles, key switch etc.). This is how it works: Press the thrust bolt on the back of the cylinder with a pointed object (key, fixing screw etc.); turn the lock cam in the desired position; release the thrust bolt; the thrust bolt engages then automatically.

Keyed alike Length A VBH Article-No. keyed alike No. 3 30 392.794 / 0003 ÒG;~ #sÓ keyed alike No. 3 35 392.795 / 0003 ÒG;È #vÓ keyed alike No. 3 40 392.796 / 0003 ÒG;É #yÓ keyed alike No. 3 45 392.797 / 0003 ÒG;Ê #|Ó keyed alike No. 3 50 392.798 / 0003 ÒG;Ë #ÈÓ keyed alike No. 3 55 395.476 / 0003 ÒGVl #sÓ keyed alike No. 3 60 395.477 / 0003 ÒGVm #vÓ keyed alike No. 3 65 395.478 / 0003 ÒGVn #yÓ keyed alike No. 3 70 395.479 / 0003 ÒGVo #|Ó

greenteQ Additional change key keyed alike No. 3 greenteQ additional change key for greenteQ profile double cylinder SX, SX greenteQ profile half-cylinder 8-F, greenteQ Profile knob cylinder SX.

Keyed alike PU VBH Article-No. keyed alike No. 3 1 pc. 389.646 / 0003 ÒFÉN #lÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 61 © VBH Profile cylinder keyed alike No. 3 DOOR HARDWARE Profile cylinder keyed alike No. 4 greenteQ Profile double cylinder SX GF Keyed alike No. 4 greenteQ profile double cylinder SX; standard profil, 6 pin system; emergency function (bilateral opening); certification according to EN 1303 : 2005; drilling protection; core extraction protection; anti-picking; basic length 30/30 mm; deliverable extensions at one side or both sides each by 5 mm possible; supplied with 3 keys; brass matt nickel-plated.

Keyed alike Length A Length B VBH Article-No. keyed alike No. 4 30 30 387.487 / 0004 ÒFjw $YÓ C keyed alike No. 4 30 35 387.488 / 0004 ÒFjx $\Ó 9,5 17 keyed alike No. 4 30 40 387.489 / 0004 ÒFjy $_Ó keyed alike No. 4 30 45 387.490 / 0004 ÒFjz $bÓ 32,8 keyed alike No. 4 30 50 387.491 / 0004 ÒFj{ $eÓ M5 R15

keyed alike No. 4 30 55 387.492 / 0004 ÒFj| $hÓ 30° A B 10 keyed alike No. 4 30 60 387.493 / 0004 ÒFj} $kÓ keyed alike No. 4 30 65 395.483 / 0004 ÒGVs $&Ó keyed alike No. 4 30 70 395.484 / 0004 ÒGVt $)Ó keyed alike No. 4 30 75 999.990 / 2027 ÒÌÌz4;_Ó keyed alike No. 4 35 35 387.494 / 0004 ÒFj~ $nÓ keyed alike No. 4 35 40 387.495 / 0004 ÒFjÈ $qÓ keyed alike No. 4 35 45 387.496 / 0004 ÒFjÉ $tÓ keyed alike No. 4 35 50 387.497 / 0004 ÒFjÊ $wÓ keyed alike No. 4 35 55 387.498 / 0004 ÒFjË $zÓ keyed alike No. 4 35 60 387.499 / 0004 ÒFjÌ $}Ó keyed alike No. 4 35 65 387.500 / 0004 ÒFk $$Ó keyed alike No. 4 35 70 387.501 / 0004 ÒFk! $'Ó keyed alike No. 4 40 40 387.502 / 0004 ÒFk" $*Ó keyed alike No. 4 40 45 387.503 / 0004 ÒFk# $-Ó keyed alike No. 4 40 50 387.504 / 0004 ÒFk$ $0Ó keyed alike No. 4 40 55 387.505 / 0004 ÒFk% $3Ó keyed alike No. 4 40 60 387.506 / 0004 ÒFk& $6Ó keyed alike No. 4 40 65 389.598 / 0004 ÒFÈË $=Ó keyed alike No. 4 40 70 389.599 / 0004 ÒFÈÌ $@Ó keyed alike No. 4 45 45 387.507 / 0004 ÒFk' $9Ó keyed alike No. 4 45 50 387.508 / 0004 ÒFk( $<Ó keyed alike No. 4 45 55 387.509 / 0004 ÒFk) $?Ó keyed alike No. 4 45 60 387.510 / 0004 ÒFk* $BÓ keyed alike No. 4 45 65 387.511 / 0004 ÒFk+ $EÓ keyed alike No. 4 50 50 387.512 / 0004 ÒFk, $HÓ keyed alike No. 4 50 55 389.600 / 0004 ÒFÉ $NÓ keyed alike No. 4 50 60 389.601 / 0004 ÒFÉ! $QÓ

62 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Profile cylinder keyed alike No. 4 © VBH DOOR HARDWARE Profile cylinder keyed alike No. 4 greenteQ Profile half cylinder SX 8-F keyed alike No. 4 greenteQ profile half cylinder SX 8-F are made off brass matt nickel-plated and the standard cylinder has a 6 pin system. They are tested and certified according to EN 1303:2005/ AC:2008, have an 8-fold adjustable cam and have a drilling protection, core extraction protection as well as anti-picking. The basic length of the greenteQ profile half cylinders SX 8-F is 30 mm; available extensions at one side by 5 mm are possible. The cylinders are delivered with 3 keys. Instruction manual for the 8-fold adjustable cam: New functionality of greenteQ profile half cylinder SX 8-F: The lock cam is at an angle of 45° 8-fold adjustable, so that the cylinder is usable in various installation situations (lockable window handles, key switch etc.). This is how it works: Press the thrust bolt on the back of the cylinder with a pointed object (key, fixing screw etc.); turn the lock cam in the desired position; release the thrust bolt; the thrust bolt engages then automatically.

Keyed alike Length A VBH Article-No. keyed alike No. 4 30 392.794 / 0004 ÒG;~ $xÓ keyed alike No. 4 35 392.795 / 0004 ÒG;È ${Ó keyed alike No. 4 40 392.796 / 0004 ÒG;É $~Ó keyed alike No. 4 45 392.797 / 0004 ÒG;Ê $ÊÓ keyed alike No. 4 50 392.798 / 0004 ÒG;Ë $ÍÓ keyed alike No. 4 55 395.476 / 0004 ÒGVl $xÓ keyed alike No. 4 60 395.477 / 0004 ÒGVm ${Ó keyed alike No. 4 65 395.478 / 0004 ÒGVn $~Ó keyed alike No. 4 70 395.479 / 0004 ÒGVo $ÊÓ

greenteQ Additional change key keyed alike No. 4 greenteQ additional change key for greenteQ profile double cylinder SX, SX greenteQ profile half-cylinder 8-F, greenteQ Profile knob cylinder SX.

Keyed alike PU VBH Article-No. keyed alike No. 4 1 pc. 389.646 / 0004 ÒFÉN $qÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 63 © VBH Profile cylinder keyed alike No. 4 DOOR HARDWARE Profile cylinder keyed alike No. 5 greenteQ Profile double cylinder SX GF Keyed alike No. 5 greenteQ profile double cylinder SX; standard profil, 6 pin system; emergency function (bilateral opening); certification according to EN 1303 : 2005; drilling protection; core extraction protection; anti-picking; basic length 30/30 mm; deliverable extensions at one side or both sides each by 5 mm possible; supplied with 3 keys; brass matt nickel-plated.

Keyed alike Length A Length B VBH Article-No. keyed alike No. 5 30 30 387.487 / 0005 ÒFjw %^Ó C keyed alike No. 5 30 35 387.488 / 0005 ÒFjx %aÓ 9,5 17 keyed alike No. 5 30 40 387.489 / 0005 ÒFjy %dÓ keyed alike No. 5 30 45 387.490 / 0005 ÒFjz %gÓ 32,8 keyed alike No. 5 30 50 387.491 / 0005 ÒFj{ %jÓ M5 R15

keyed alike No. 5 30 55 387.492 / 0005 ÒFj| %mÓ 30° A B 10 keyed alike No. 5 30 60 387.493 / 0005 ÒFj} %pÓ keyed alike No. 5 30 65 395.483 / 0005 ÒGVs %+Ó keyed alike No. 5 30 70 395.484 / 0005 ÒGVt %.Ó keyed alike No. 4 30 75 999.990 / 2027 ÒÌÌz4;_Ó keyed alike No. 5 35 35 387.494 / 0005 ÒFj~ %sÓ keyed alike No. 5 35 40 387.495 / 0005 ÒFjÈ %vÓ keyed alike No. 5 35 45 387.496 / 0005 ÒFjÉ %yÓ keyed alike No. 5 35 50 387.497 / 0005 ÒFjÊ %|Ó keyed alike No. 5 35 55 387.498 / 0005 ÒFjË %ÈÓ keyed alike No. 5 35 60 387.499 / 0005 ÒFjÌ %ËÓ keyed alike No. 5 35 65 387.500 / 0005 ÒFk %)Ó keyed alike No. 5 35 70 387.501 / 0005 ÒFk! %,Ó keyed alike No. 5 40 40 387.502 / 0005 ÒFk" %/Ó keyed alike No. 5 40 45 387.503 / 0005 ÒFk# %2Ó keyed alike No. 5 40 50 387.504 / 0005 ÒFk$ %5Ó keyed alike No. 5 40 55 387.505 / 0005 ÒFk% %8Ó keyed alike No. 5 40 60 387.506 / 0005 ÒFk& %;Ó keyed alike No. 5 40 65 389.598 / 0005 ÒFÈË %BÓ keyed alike No. 5 40 70 389.599 / 0005 ÒFÈÌ %EÓ keyed alike No. 5 45 45 387.507 / 0005 ÒFk' %>Ó keyed alike No. 5 45 50 387.508 / 0005 ÒFk( %AÓ keyed alike No. 5 45 55 387.509 / 0005 ÒFk) %DÓ keyed alike No. 5 45 60 387.510 / 0005 ÒFk* %GÓ keyed alike No. 5 45 65 387.511 / 0005 ÒFk+ %JÓ keyed alike No. 5 50 50 387.512 / 0005 ÒFk, %MÓ keyed alike No. 5 50 55 389.600 / 0005 ÒFÉ %SÓ keyed alike No. 5 50 60 389.601 / 0005 ÒFÉ! %VÓ

64 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Profile cylinder keyed alike No. 5 © VBH DOOR HARDWARE Profile cylinder keyed alike No. 5 greenteQ Profile half cylinder SX 8-F keyed alike No. 5 greenteQ profile half cylinder SX 8-F are made off brass matt nickel-plated and the standard cylinder has a 6 pin system. They are tested and certified according to EN 1303:2005/ AC:2008, have an 8-fold adjustable cam and have a drilling protection, core extraction protection as well as anti-picking. The basic length of the greenteQ profile half cylinders SX 8-F is 30 mm; available extensions at one side by 5 mm are possible. The cylinders are delivered with 3 keys.

Keyed alike Length A VBH Article-No. keyed alike No. 5 30 392.794 / 0005 ÒG;~ %}Ó keyed alike No. 5 35 392.795 / 0005 ÒG;È %ÉÓ keyed alike No. 5 40 392.796 / 0005 ÒG;É %ÌÓ keyed alike No. 5 45 392.797 / 0005 ÒG;Ê %ÏÓ keyed alike No. 5 50 392.798 / 0005 ÒG;Ë %"Ó keyed alike No. 5 55 395.476 / 0005 ÒGVl %}Ó keyed alike No. 5 60 395.477 / 0005 ÒGVm %ÉÓ keyed alike No. 5 65 395.478 / 0005 ÒGVn %ÌÓ keyed alike No. 5 70 395.479 / 0005 ÒGVo %ÏÓ

greenteQ Additional change key keyed alike No. 5 greenteQ additional change key for greenteQ profile double cylinder SX, SX greenteQ profile half-cylinder 8-F, greenteQ Profile knob cylinder SX.

Keyed alike PU VBH Article-No. keyed alike No. 5 1 pc. 389.646 / 0005 ÒFÉN %vÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 65 © VBH Profile cylinder keyed alike No. 5 DOOR HARDWARE Profile cylinder WC greenteQ WC knob cylinder SX greenteQ WC knob cylinder SX is made of brass matt nickel-plated. The greenteQ WC knob cylinder SX can be opened in the emergency with a flat object from the outside. Two lengths of greenteQ WC knob cylinder SX, 32,5 / 32,5K mm and 35 / 35K mm, are available.

Technical data: • Material of profile cylinder: brass • Surface: satin nickel-plated • Emergency function: - • Fixing screw: 1 x M5 x 50 mm and 1 x M5 x 80 mm

Length A Length B VBH Article-No. 32.5 32.5 398.383 / 0000 ÒGss LÓ 35 35 398.382 / 0000 ÒGsr IÓ 9,5 17 32,8

M5 R1 5 30° 40 A B 10 Ø3 0

greenteQ WC knob half cylinder SX greenteQ WC knob half cylinder SX is made of brass matt nickel-plated. One length of greenteQ WC knob cylinder SX 35 is available.

Technical data: • Material of profile cylinder: brass • Surface: satin nickel-plated • Emergency function: - • Fixing screw: 1 x M5 x 50 mm and 1 x M5 x 80 mm

Length A Length B VBH Article-No. 35 - 398.384 / 0000 ÒGst OÓ

9,5 17 32,8 M5 R1 5 30° 40 A 10 10 Ø3 0

66 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Profile cylinder WC © VBH DOOR HARDWARE Escutcheon greenteQ Escutcheon 25 mm greenteQ Escutcheon 25 mm ER is made of stainless steel with a diameter of 25 mm. The drilling for greenteQ Escutcheon 25 mm ER must be 21+0,05 mm in diameter. greenteQ Escutcheon 25 mm ER should be ensured with the adhesive.

Material Diameter Fastening PU VBH Article-No. Stainless steel 21+0,05 mm with adhesive 1 pc. 402.689 / 6500 ÒH:ya #Ó

Ø25 Ø15,5 4 Ø21 Ø20,5

7 13

greenteQ Escutcheon 35 mm greenteQ Escutcheon 35 mm ER with self adhesive is made of stainless steel with a diameter of 35mm. The drilling for greenteQ Escutcheon 35 mm ER with self adhesive must be 21+0,05 mm in diameter. The fixing is made by means of the self adhesive at the rear edge.

Material Diameter Fastening PU VBH Article-No. Stainless steel 21+0,05 mm self adhesive 1 pc. 402.690 / 6500 ÒH:za &Ó

Ø35 4,5 Ø15,5 Ø2 1

7 13

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 67 © VBH Escutcheon DOOR HARDWARE Front door seals greenteQ Front Door Seal TPE-V greenteQ front door seals consist of high-quality TPE-V material (highly crosslinked EPDM- X+PP) in the function elements seal head and foot-retainer lip. The basic structure and the easy-cleaning, coloured special coating are produced from TPE-S material. The linear closing pressure is very low, with a high range of action (high tolerance equalisation). The materials are compatible with all common painting systems. Unknown paints and coatings must be tested for compatibility in terms of their contact with the seal profiles. greenteQ front door seals are temperature resistant from - 40°C up to +80°C as well as resistant to ageing, weather, UV and ozone. They have very good physical features, are free from PVC and do not contain softeners or silicone.

Fold height Surface PU VBH Article-No. 12 mm black similar to RAL 9017 100 m 180.035 / 0001 Ò2 C !;Ó 12 mm white similar to RAL 9016 100 m 180.035 / 0002 Ò2 C "@Ó 12 mm grey similar to RAL 7040 100 m 180.035 / 0003 Ò2 C #EÓ L 12 mm brown similar to RAL 8002 100 m 180.035 / 0004 Ò2 C $JÓ 12 mm beige similar to RAL 1001 100 m 180.035 / 0005 Ò2 C %OÓ 15 mm black similar to RAL 9017 100 m 180.036 / 0001 Ò2 D !>Ó 15 mm white similar to RAL 9016 100 m 180.036 / 0002 Ò2 D "CÓ 15 mm grey similar to RAL 7040 100 m 180.036 / 0003 Ò2 D #HÓ 15 mm brown similar to RAL 8002 100 m 180.036 / 0004 Ò2 D $MÓ 15 mm beige similar to RAL 1001 100 m 180.036 / 0005 Ò2 D %RÓ 18 mm black similar to RAL 9017 100 m 180.037 / 0001 Ò2 E !AÓ 18 mm white similar to RAL 9016 100 m 180.037 / 0002 Ò2 E "FÓ 18 mm grey similar to RAL 7040 100 m 180.037 / 0003 Ò2 E #KÓ 18 mm brown similar to RAL 8002 100 m 180.037 / 0004 Ò2 E $PÓ 18 mm beige similar to RAL 1001 100 m 180.037 / 0005 Ò2 E %UÓ

68 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Front door seals © VBH DOOR HARDWARE Door hinges for PVC doors (house doors) greenteQ Door hinge TB 100.ZD.K

With the new greenteQ TB 100.ZD.K door 101 hinge, VBH presents a 3-dimensionally adjustable door hinge for PVC doors with a 50 sash weight up to 100 kg for house doors which are subject to heavy stress and frequent use. 92 The name TB 100.ZD.K stands for: door hinge - 100 kg - made of zinc diecasting - for PVC doors. The bands can be used for doors which open 24 inwards or outwards, can be mounted on the left or right, and have a simple stop and easy adjustment. The greenteQ door hinges are available in white RAL 9016, brown RAL 8019, PVD chrome polished, PVD gold polished or silver (RAL 9006). The constructional moulding in zinc diecasting was designed to ensure maximum strength in the main areas of stress. The door hinge is certified in accordance with EN 1935.

Technical data: • Material: Zinc diecasting • Bearing capacity: 100 kg • Frame component: 19 mm exposure height • Lateral adjustment: +5 / -5 mm • Vertical adjustment: +4 / -1 mm • Closing pressure adjustment: +1.5 / -1.5 mm • Certified in accordance with: EN1935 | 4 I 7 I 5 I 0 I 1 I 4 I 0 I 12 | For direct mounting, please use a greenteQ drilling jig made of aluminium or polyamide, with hardened steel bushings

Material Surface Colour code Upstand height (*) VBH Article-No. Zinc die-cast silver similar to 9006 Q9006 13.5 - 16.5 mm 391.646 / 0100 ÒG0N! )Ó Zinc die-cast silver similar to 9006 Q9006 18.5 - 21.5 mm 391.647 / 0100 ÒG0O! ,Ó Zinc die-cast brown RAL 8019 13.5 - 16.5 mm 391.646 / 0900 ÒG0N) IÓ Zinc die-cast brown RAL 8019 18.5 - 21.5 mm 391.647 / 0900 ÒG0O) LÓ Zinc die-cast white RAL 9016 13.5 - 16.5 mm 391.646 / 1000 ÒG0N* MÓ Zinc die-cast white RAL 9016 18.5 - 21.5 mm 391.647 / 1000 ÒG0O* PÓ Zinc die-cast PVD chrome polished PVD-C 13.5 - 16.5 mm 391.646 / 4210 ÒG0NJ*1Ó Zinc die-cast PVD chrome polished PVD-C 18.5 - 21.5 mm 391.647 / 4210 ÒG0OJ*4Ó Zinc die-cast PVD gold polished PVD-G 13.5 - 16.5 mm 391.646 / 7110 ÒG0Ng*>Ó Zinc die-cast PVD gold polished PVD-G 18.5 - 21.5 mm 391.647 / 7110 ÒG0Og*AÓ Zinc die-cast pearl gold RAL 1036 13.5 - 16.5 mm 391.646 / 1036 ÒG0N*D3Ó Zinc die-cast pearl gold RAL 1036 18.5 - 21.5 mm 391.647 / 1036 ÒG0O*D6Ó

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 69 © VBH Door hinges for PVC doors (house doors) DOOR HARDWARE Door hinges for PVC doors (house doors) greenteQ Set of plastic accessories TB 100.ZD.K greenteQ set of plastic accessories TB 100.ZD.K is usable as spare parts in case of loss or damage during the assembly of greenteQ door hinge TB 100.ZD.K. The set of plastic accessories is available in the colours white, brown, gold or chrome/silver.

Material Surface PU VBH Article-No. B Plastic (Nylon) white 100 sets 395.356 / 1000 ÒGUX* NÓ C Plastic (Nylon) brown 100 sets 395.356 / 0900 ÒGUX) JÓ Plastic (Nylon) chrome/silver 100 sets 395.356 / 4200 ÒGUXJ gÓ Plastic (Nylon) gold 100 sets 395.356 / 7100 ÒGUXg tÓ

greenteQ Packer for door hinge TB 100.ZD.K greenteQ packer for door-hinge to adjust different upstand heights. greenteQ packer for TB 80.ZD.K door hinge and TB 100.ZD.K door hinge; plastic; thickness: 1 mm, 2 mm, 3 mm or 5 mm; white, brown, chrome/silver or gold.

Material Surface Strength PU VBH Article-No. Plastic white 1 mm 100 pcs. 386.672 / 1000 ÒFbh* 0Ó Plastic white 2 mm 100 pcs. 386.673 / 1000 ÒFbi* 3Ó Plastic white 3 mm 100 pcs. 389.890 / 1000 ÒFËz* ?Ó 24 1 Plastic white 5 mm 100 pcs. 389.891 / 1000 ÒFË{* BÓ Plastic brown 1 mm 100 pcs. 386.672 / 0900 ÒFbh) ,Ó Plastic brown 2 mm 100 pcs. 386.673 / 0900 ÒFbi) /Ó Plastic brown 3 mm 100 pcs. 389.890 / 0900 ÒFËz) ;Ó

Plastic brown 5 mm 100 pcs. 389.891 / 0900 ÒFË{) >Ó 92 Plastic chrome/silver 1 mm 100 pcs. 386.672 / 4200 ÒFbhJ IÓ Plastic chrome/silver 2 mm 100 pcs. 386.673 / 4200 ÒFbiJ LÓ Plastic chrome/silver 3 mm 100 pcs. 389.890 / 4200 ÒFËzJ XÓ Plastic chrome/silver 5 mm 100 pcs. 389.891 / 4200 ÒFË{J [Ó Plastic gold 1 mm 100 pcs. 386.672 / 7100 ÒFbhg VÓ Plastic gold 2 mm 100 pcs. 386.673 / 7100 ÒFbig YÓ Plastic gold 3 mm 100 pcs. 389.890 / 7100 ÒFËzg eÓ Plastic gold 5 mm 100 pcs. 389.891 / 7100 ÒFË{g hÓ

greenteQ Fastening set TB 100.ZD.K greenteQ set of screws TB 100.ZD.K for the door hinge TB 100.ZD.K is usable as spare parts in case of loss or damage during the assembly of greenteQ door hinge TB 100.ZD.K. Upstand Dimension d x L PU VBH Article-No. height 6.3 x 40 mm (7 pieces) and 6.3 x 28 mm (2 13.5 - 21.5 mm 1 set 395.358 / 0000 pieces) ÒGUZ ,Ó

70 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Door hinges for PVC doors (house doors) © VBH DOOR HARDWARE Door hinges for PVC doors (house doors) greenteQ Fastening set TB 100.ZD.K long

50 mm long screws for the frame part of the door hinge TB 100.ZD.K, with the use of tape- records for frame profiles with low center of reinforcement.

Dimension d x L Upstand height PU VBH Article-No. 6.3 x 50 mm (3 pieces) 13.5 - 21.5 mm 1 set 390.898 / 0000 ÒG(Ë JÓ

greenteQ Drilling jig TB 100.ZD.K greenteQ drilling jig for door hinge TB 100.ZD.K; aluminium or polyamide, with hardened steel bushings

Material PU VBH Article-No. Aluminium 1 pc. 386.674 / 0000 ÒFbj uÓ Polyamide 6,6 1 pc. 389.145 / 0000 ÒF{M PÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 71 © VBH Door hinges for PVC doors (house doors) DOOR HARDWARE Door hinges for PVC doors (house doors) greenteQ Door hinge TB 120.ZD.K *new*

With the new greenteQ TB 120.ZD.K door hinge, 102 VBH presents a 3-dimensionally adjustable door hinge for PVC doors with a sash weight up to 58

120 kg for house doors which are subject to 2 heavy stress and frequent use. The name 11 TB 120.ZD.K stands for: door hinge - 120 kg - made of zinc diecasting - for PVC doors. The bands can be used for doors which open inwards 24 or outwards, can be mounted on the left or right, and have a simple stop and easy adjustment. The greenteQ door hinges are available in white RAL 9016, brown RAL 8019, PVD chrome polished, PVD gold polished or silver (RAL 9006). The constructional moulding in zinc diecasting was designed to ensure maximum strength in the main areas of stress. The door hinge is certified in accordance with EN 1935.

Technical data: • Material: Zinc diecasting • Bearing capacity: 120 kg • Frame component: 19 mm exposure height • Lateral adjustment: +5 / -5 mm • Vertical adjustment: +4 / -1 mm • Closing pressure adjustment: +1.5 / -1.5 mm • Certified in accordance with: EN1935 | 4 I 7 I 6 I 0 I 1 I 4 I 0 I 13 | For direct mounting, please use a greenteQ drilling jig made of aluminium or polyamide, with hardened steel bushings

Material Surface Colour code Upstand height (*) VBH Article-No. Zinc die-cast silver similar to 9006 Q9006 16.5 - 19.5 mm 399.410 / 0100 ÒG~*! YÓ Zinc die-cast silver similar to 9006 Q9006 19.5 - 22.5 mm 399.412 / 0100 ÒG~,! _Ó Zinc die-cast silver similar to 9006 Q9006 22.5 - 25.5 mm 399.413 / 0100 ÒG~-! bÓ Zinc die-cast brown RAL 8019 16.5 - 19.5 mm 399.410 / 0900 ÒG~*) yÓ Zinc die-cast brown RAL 8019 19.5 - 22.5 mm 399.412 / 0900 ÒG~,) ÈÓ Zinc die-cast brown RAL 8019 22.5 - 25.5 mm 399.413 / 0900 ÒG~-) ËÓ Zinc die-cast white RAL 9016 16.5 - 19.5 mm 399.410 / 1000 ÒG~** }Ó Zinc die-cast white RAL 9016 19.5 - 22.5 mm 399.412 / 1000 ÒG~,* ÌÓ Zinc die-cast white RAL 9016 22.5 - 25.5 mm 399.413 / 1000 ÒG~-* ÏÓ Zinc die-cast PVD chrome polished PVD-C 16.5 - 19.5 mm 399.410 / 4210 ÒG~*J*aÓ Zinc die-cast PVD chrome polished PVD-C 19.5 - 22.5 mm 399.412 / 4210 ÒG~,J*gÓ Zinc die-cast PVD chrome polished PVD-C 22.5 - 25.5 mm 399.413 / 4210 ÒG~-J*jÓ Zinc die-cast PVD gold polished PVD-G 16.5 - 19.5 mm 399.410 / 7110 ÒG~*g*nÓ Zinc die-cast PVD gold polished PVD-G 19.5 - 22.5 mm 399.412 / 7110 ÒG~,g*tÓ Zinc die-cast PVD gold polished PVD-G 22.5 - 25.5 mm 399.413 / 7110 ÒG~-g*wÓ Zinc die-cast pearl gold RAL 1036 16.5 - 19.5 mm 399.410 / 1036 ÒG~**DcÓ Zinc die-cast pearl gold RAL 1036 19.5 - 22.5 mm 399.412 / 1036 ÒG~,*DiÓ Zinc die-cast pearl gold RAL 1036 22.5 - 25.5 mm 399.413 / 1036 ÒG~-*DlÓ

72 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Door hinges for PVC doors (house doors) © VBH DOOR HARDWARE Door hinges for PVC doors (house doors) greenteQ Set of plastic accessories TB 120.ZD.K greenteQ set of plastic accessories TB 120.ZD.K is usable as spare parts in case of loss or damage during the assembly of greenteQ door hinge TB 120.ZD.K. The set of plastic accessories is available in the colours white, brown, gold or chrome/silver.

Material Surface PU VBH Article-No. Plastic (Nylon) white 100 sets 395.357 / 1000 ÒGUY* QÓ B Plastic (Nylon) brown 100 sets 395.357 / 0900 ÒGUY) MÓ Plastic (Nylon) chrome/silver 100 sets 395.357 / 4200 ÒGUYJ jÓ Plastic (Nylon) gold 100 sets 395.357 / 7100 ÒGUYg wÓ

greenteQ Packer for door hinge TB 120.ZD.K greenteQ packer for door-hinge to adjust different upstand heights. greenteQ Packer for greenteQ door hinge TB 120.ZD.K is made of plastic and has a thickness of 1.5 mm. The packer is available in the colours white, brown, gold and chrome/silver.

Material Surface Strength PU VBH Article-No. Plastic white 1.5 mm 100 pcs. 391.842 / 1000 ÒG2J* EÓ Plastic brown 1.5 mm 100 pcs. 391.842 / 0900 ÒG2J) AÓ Plastic chrome/silver 1.5 mm 100 pcs. 391.842 / 4200 ÒG2JJ ^Ó 24 1,5 Plastic gold 1.5 mm 100 pcs. 391.842 / 7100 ÒG2Jg kÓ 2 11

greenteQ Fastening set TB 120.ZD.K greenteQ set of screws TB 120.ZD.K for the door hinge TB 120.ZD.K is usable as spare parts in case of loss or damage during the assembly of greenteQ door hinge TB 120.ZD.K. Upstand Dimension d x L PU VBH Article-No. height 7.3 x 40 mm (4 pieces) and 7.3 x 45 mm (2 16.5 - 19.5 mm 1 set 395.359 / 1619 pieces) ÒGU[03gÓ 7.3 x 40 mm (4 pieces) and 7.3 x 48 mm (2 19.5 - 22.5 mm 1 set 395.359 / 1922 pieces) ÒGU[36ËÓ 7.3 x 40 mm (4 pieces) and 7.3 x 53 mm (2 22.5 - 25.5 mm 1 set 395.359 / 2225 pieces) ÒGU[696Ó

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 73 © VBH Door hinges for PVC doors (house doors) DOOR HARDWARE Door hinges for PVC doors (house doors) greenteQ Drilling jig TB 120.ZD.K adjustable greenteQ drilling jig TB 120.ZD.K adjustable is made for simultaneous fitting of sash and frame. With the adjustable guiding rail and the adjustable drilling slider it is possible to adjust the positions of screws and the centering pin according to the used door profile and the reinforcement. It is equipped with hardened bushes.

Material PU VBH Article-No. Polyamide 6,6 1 pc. 394.304 / 0000 ÒGK$ DÓ

greenteQ Telescopic bar for adjustable jig TB 120.ZD.K

The telescoping bar to jig greenteQ 120.ZD.K adjustable TB is made of aluminum and is adjustable along with 3 TB 120.ZD.K greenteQ jigs (not included), can be used as telescoping bar for mounting the door hinges greenteQ TB 120.ZD.K. Adjustable with the telescoping rod to jig greenteQ 120.ZD.K TB after a single establishment of the upper and lower stops is possible a simple, quick, and consistent positioning of the door hinges to the frame and sash - no need for repeated measuring and marking.

Technical data: • Material Telescopic bar: Aluminium • Material support for greenteQ jig TB 120.ZD.K: Aluminium • Material threaded rod height stop: Stainless steel • Material height angle stop: Aluminium • Length Telescopic bar: 2,405 mm • Maximum extension length (threaded bar and stop): 2,700 mm • Fastening (hexagon head screw): 2 x M5 x 10mm and 12 x M5 x 15mm

Material PU VBH Article-No. Aluminium / Stainless steel 1 pc. 394.305 / 0000 ÒGK% GÓ

74 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Door hinges for PVC doors (house doors) © VBH DOOR HARDWARE Supplementary range greenteQ Door knockers

76,4 21,5 30,8 greenteQ door knockers for a careful knocking 12,2 on entrance doors of flats and houses. It can

be mounted additionally or in frame for a bell. 51,7 The greenteQ door knocker delivered without 13,2 hole or with hole. The hole is an apparatus for 16,2 a door viewer. The greenteQ door knocker is 155,6 50,2 supplied without screws. It’s made of zinc diecasting method. Fixing screws (not included): Pan head screws (4 pieces), e.g. 4,2x22 mm.

Material Surface Colour code Variants PU VBH Article-No. Zinc die-cast black Q9011 without hole 1 pc. 390.811 / 0800 ÒG(+( 3Ó Zinc die-cast white Q9016 without hole 1 pc. 390.811 / 1000 ÒG(+* ;Ó Zinc die-cast PVD chrome polished PVD-C without hole 1 pc. 390.811 / 4210 ÒG(+J*ÏÓ Zinc die-cast PVD gold polished PVD-G without hole 1 pc. 390.811 / 7110 ÒG(+g*,Ó

greenteQ Door knocker slim

58 17,4 22 greenteQ door knockers for a careful knocking 13,3 on entrance doors of flats and houses. It can be mounted additionally or in frame for a bell. 51,9 11 The greenteQ door knocker delivered without 16 hole or with hole. The hole is an apparatus for 31 a door viewer. The greenteQ door knocker is 178,6 supplied without screws. Fixing screws (not included): Pan head screws (4 pieces), e.g. 4,2x22 mm.

Material Surface Colour code Variants PU VBH Article-No. Zinc die-cast black Q9011 slim without hole 1 pc. 390.813 / 0800 ÒG(-( 9Ó Zinc die-cast white Q9016 slim without hole 1 pc. 390.813 / 1000 ÒG(-* AÓ Zinc die-cast PVD chrome polished PVD-C slim without hole 1 pc. 390.813 / 4210 ÒG(-J*%Ó Zinc die-cast PVD gold polished PVD-G slim without hole 1 pc. 390.813 / 7110 ÒG(-g*2Ó

greenteQ Door knocker with hole

76,4 21,5 30,8 greenteQ door knockers for a careful knocking 12,2 on entrance doors of flats and houses. It can

be mounted additionally or in frame for a bell. 51,7 The greenteQ door knocker delivered without 13,2 hole or with hole. The hole is an apparatus for 16,2 a door viewer. The greenteQ door knocker is 155,6 12,5 50,2 supplied without screws. It’s made of zinc die- Ø casting method. Fixing screws (not included): Pan head screws (4 pieces), e.g. 4,2x22 mm.

Material Surface Colour code Variants PU VBH Article-No. Zinc die-cast PVD chrome polished PVD-C with hole 1 pc. 390.812 / 4210 ÒG(,J*"Ó Zinc die-cast PVD gold polished PVD-G with hole 1 pc. 390.812 / 7110 ÒG(,g*/Ó

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 75 © VBH Supplementary range DOOR HARDWARE Supplementary range greenteQ Door knocker slim with hole

58 17,4 22 greenteQ door knockers for a careful knocking 13,3 on entrance doors of flats and houses. It can be mounted additionally or in frame for a bell. 51,9 11 The greenteQ door knocker delivered without 16 hole or with hole. The hole is an apparatus for 31 12,5 178,6 a door viewer. The greenteQ door knocker is Ø supplied without screws. Fixing screws (not included): Pan head screws (4 pieces), e.g. 4,2x22 mm.

Material Surface Colour code Variants PU VBH Article-No. Zinc die-cast PVD chrome polished PVD-C slim with hole 1 pc. 390.814 / 4210 ÒG(.J*(Ó Zinc die-cast PVD gold polished PVD-G slim with hole 1 pc. 390.814 / 7110 ÒG(.g*5Ó

greenteQ Door viewer

The greenteQ door viewer is suitable for a bore 4 2 diameter of 12 mm and for a door thickness from 35 - 60 mm or 60 - 85 mm. The angle of view amounts 160°. The greenteQ door viewer 16 15 is made of brass. Ø Ø

Material Surface Colour code Door thickness PU VBH Article-No. Brass PVD chrome polished PVD-C 25 - 40 mm 1 pc. 403.170 / 4210 ÒH?fJ*1Ó Brass PVD gold polished PVD-G 25 - 40 mm 1 pc. 403.170 / 7110 ÒH?fg*>Ó Brass PVD chrome polished PVD-C 35 - 60 mm 1 pc. 390.809 / 4210 ÒG()J*ÉÓ Brass PVD gold polished PVD-G 35 - 60 mm 1 pc. 390.809 / 7110 ÒG()g*&Ó Brass PVD chrome polished PVD-C 60 - 85 mm 1 pc. 390.810 / 4210 ÒG(*J*ÌÓ Brass PVD gold polished PVD-G 60 - 85 mm 1 pc. 390.810 / 7110 ÒG(*g*)Ó

76 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Supplementary range © VBH DOOR HARDWARE Supplementary range greenteQ Signs Ladies greenteQ self-sticking signs, made of stainless steel, matt brushed, for use on smooth surfaces, interior and exterior. With different symbols and signs. greenteQ sign; diameter 76mm; self-sticking; stainless steel matt brushed.

Variants Material Surface PU VBH Article-No. "Ladies" Stainless steel matt brushed 1 pc. 376.925 / 0000 ÒEe9 NÓ

greenteQ Signs Gentlemen greenteQ self-sticking signs, made of stainless steel, matt brushed, for use on smooth surfaces, interior and exterior. With different symbols and signs. greenteQ sign; diameter 76mm; self-sticking; stainless steel matt brushed.

Variants Material Surface PU VBH Article-No. "Gentlemen" Stainless steel matt brushed 1 pc. 376.926 / 0000 ÒEe: QÓ

greenteQ Signs WC greenteQ self-sticking signs, made of stainless steel, matt brushed, for use on smooth surfaces, interior and exterior. With different symbols and signs. greenteQ sign; diameter 76mm; self-sticking; stainless steel matt brushed.

Variants Material Surface PU VBH Article-No. "WC" Stainless steel matt brushed 1 pc. 376.927 / 0000 ÒEe; TÓ

greenteQ Signs Wheelchair greenteQ self-sticking signs, made of stainless steel, matt brushed, for use on smooth surfaces, interior and exterior. With different symbols and signs. greenteQ sign; diameter 76mm; self-sticking; stainless steel matt brushed.

Variants Material Surface PU VBH Article-No. "Wheelchair" Stainless steel matt brushed 1 pc. 376.928 / 0000 ÒEe< WÓ

greenteQ Signs Nonsmoker greenteQ self-sticking signs, made of stainless steel, matt brushed, for use on smooth surfaces, interior and exterior. With different symbols and signs. greenteQ sign; diameter 76mm; self-sticking; stainless steel matt brushed.

Variants Material Surface PU VBH Article-No. "Nonsmoker" Stainless steel matt brushed 1 pc. 376.929 / 0000 ÒEe= ZÓ

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 77 © VBH Supplementary range DOOR HARDWARE Supplementary range greenteQ Signs PULL greenteQ self-sticking signs, made of stainless steel, matt brushed, for use on smooth surfaces, interior and exterior. With different symbols and signs. greenteQ sign; diameter 76mm; self-sticking; stainless steel matt brushed.

Variants Material Surface PU VBH Article-No. "Pull" Stainless steel matt brushed 1 pc. 376.930 / 0000 ÒEe> ]Ó

greenteQ Signs PUSH greenteQ self-sticking signs, made of stainless steel, matt brushed, for use on smooth surfaces, interior and exterior. With different symbols and signs. greenteQ sign; diameter 76mm; self-sticking; stainless steel matt brushed.

Variants Material Surface PU VBH Article-No. "Push" Stainless steel matt brushed 1 pc. 376.931 / 0000 ÒEe? `Ó

greenteQ Floor doorstop greenteQ floor doorstop; diameter 70 mm; height 21 mm; with dowel and screw; stainless steel matt brushed. 70 20 Ø Technical data: • Diameter: 70 mm • Height: 21 mm • Screws: 1 piece countersunk head wood 21 screw 6 x 60 mm with dowel 17

Material Surface PU VBH Article-No. Stainless steel matt brushed 1 pc. 376.035 / 6500 ÒE\Ca )Ó

greenteQ Wall mounted doorstop greenteQ wall mounted doorstop; diameter 25 30 mm; height 25 mm; with dowel and screw; stainless steel matt brushed. 30

Technical data: Ø • Diameter: 30 mm • Height: 25 mm • Screws: 1 piece countersunk head wood screw 5 x 50 mm with dowel

Material Surface PU VBH Article-No. Stainless steel matt brushed 1 pc. 376.036 / 6500 ÒE\Da ,Ó

78 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Supplementary range © VBH DOOR HARDWARE Supplementary range greenteQ House numbers greenteQ house numbers made of stainless steel, matt brushed, for use on the wall in the building entrance area. The material stainless steel 1.4301 (AISI 304-A2) has a good corrosion resistance to 127 108 weathering, is largely resistant to weak acids and building authorities tested and approved for moderate chloride and sulfur dioxide pollution. 2,5 Therefore the house numbers are used almost anywhere. Only the use in aggressive environments (e.g. seawater) should be avoided; with dowels and screws; stainless steel matt brushed.

Material Surface Variants PU VBH Article-No. Stainless steel matt brushed 1 1 pc. 376.032 / 0001 ÒE\@ !VÓ Stainless steel matt brushed 2 1 pc. 376.032 / 0002 ÒE\@ "[Ó Stainless steel matt brushed 3 1 pc. 376.032 / 0003 ÒE\@ #`Ó Stainless steel matt brushed 4 1 pc. 376.032 / 0004 ÒE\@ $eÓ Stainless steel matt brushed 5 1 pc. 376.032 / 0005 ÒE\@ %jÓ Stainless steel matt brushed 6 1 pc. 376.032 / 0006 ÒE\@ &oÓ Stainless steel matt brushed 7 1 pc. 376.032 / 0007 ÒE\@ 'tÓ Stainless steel matt brushed 8 1 pc. 376.032 / 0008 ÒE\@ (yÓ Stainless steel matt brushed 9 1 pc. 376.032 / 0009 ÒE\@ )~Ó Stainless steel matt brushed 0 1 pc. 376.032 / 0000 ÒE\@ QÓ

greenteQ Pro weldable corner connector

The greenteQ pro weldable corner connector consists of a basic body and a clamping element (tab). It serves in door frame production as the connecting element for the steel reinforcement in the PVC profile. The square galvanized steel tubes within the PVC profile are connected to a static load-bearing frame due to the use of the greenteQ pro weldable corner connectors. The greenteQ weldable corner connectors are measured as part of regular quality checks after production both internally on a spot-check basis and externally with regard to quality and dimensional accuracy as part of the Ift certification.The finished door frame has greater stability and ensures the best possible torsional resistance due to the extra-thick wall design and wide tab.

Product advantages: • Simple assembly process • Optimal force transmission to steel reinforcement due to the complete support of the wedges on the basic body and tab • Best possible torsional resistance due to the use of greenteQ weldable corner connectors in door frame production • Min. door frame deformation under load • Large insertion depth, also in the case of the mitred steel reinforcement • Straightforward and automatic flush-mounted tensioning element

Technical data: • Wall thickness: 5 mm • Tap: wide • Material: Rigid PVC profile sections • Tensile strength: 40 - 60 MPa • Young's modulus: 2400 MPa

Version Dimension VBH Article-No. Pro 50x40x2 mm 403.078 / 5042 ÒH>nRJ9Ó

11.04.2013 We accept no liability for printing errors. DOOR HARDWARE 79 © VBH Supplementary range DOOR HARDWARE Supplementary range greenteQ Standard weldable corner connectors

The greenteQ standard weldable corner connector consists of a basic body and a clamping element (tab). It serves in door frame production as the connecting element for the steel reinforcement in the PVC profile. The square galvanized steel tubes within the PVC profile are connected to a static load-bearing frame due to the use of the greenteQ standard weldable corner connectors. The greenteQ weldable corner connectors are measured as part of regular quality checks after production both internally on a spot-check basis and externally with regard to quality and dimensional accuracy as part of the Ift certification.The finished door frame has greater stability and ensures a high torsional resistance due to the thick wall design and wide tab.

Product advantages: • Simple assembly process • Optimal force transmission to steel reinforcement due to the complete support of the wedges on the basic body and tab • High torsional resistance due to the use of greenteQ weldable corner connectors in door frame production • Min. door frame deformation under load • Large insertion depth, also in the case of the mitred steel reinforcement • Straightforward and automatic flush-mounted tensioning element

Technical data: • Wall thickness: 3 - 5 mm • Tap: wide • Material: Rigid PVC sheet granulate • Tensile strength: 40 - 60 MPa • Young's modulus: 2200 MPa

Version Dimension VBH Article-No. Standard 45x45x2 mm 403.076 / 4542 ÒH>lMJÏÓ Standard 50x40x2 mm 403.076 / 5042 ÒH>lRJ3Ó Standard 50x50x2 mm 999.990 / 0266 ÒÌÌz"bsÓ Standard 60x40x2 mm 403.076 / 6002 ÒH>l\"aÓ Standard 60x45x2 mm 403.076 / 6052 ÒH>l\T&Ó Standard 60x46x2 mm 403.076 / 6042 ÒH>l\J[Ó Standard 65x45x2 mm 403.076 / 6542 ÒH>laJoÓ Standard 50x40x3 mm 403.076 / 5043 ÒH>lRK8Ó Standard 65x45x3 mm 403.076 / 6543 ÒH>laKtÓ greenteQ Basic weldable corner connector

The greenteQ basic weldable corner connector consists of a basic body and a clamping element (tab). It serves in door frame production as the connecting element for the steel reinforcement in the PVC profile. The square galvanized steel tubes within the PVC profile are connected to a static load-bearing frame due to the use of the greenteQ basic weldable corner connectors. The greenteQ weldable corner connectors are measured as part of regular quality checks after production both internally on a spot-check basis and externally with regard to quality and dimensional accuracy as part of the Ift certification.

Product advantages: • Simple assembly process • Good torsional resistance due to the use of greenteQ weldable corner connectors in door frame production • Min. door frame deformation under load • Large insertion depth, also in the case of the mitred steel reinforcement • Straightforward and automatic flush-mounted tensioning element

Technical data: • Wall thickness: 3 mm • Tap: narrow • Material: Rigid PVC sheet granulate • Tensile strength: 40 - 60 MPa • Young's modulus: 2200 MPa

Version Dimension VBH Article-No. Basic 50x40x2 mm 403.077 / 5042 ÒH>mRJ6Ó

80 DOOR HARDWARE We accept no liability for printing errors. 11.04.2013 Supplementary range © VBH DOOR HARDWARE Threshold system