TABLE OF CONTENTS

I. NUMBERS AND LETTERS VII. DOOR GUARDS Letters, Diecast...... 1 Door Angle Protector...... 10 Numbers, Diecast...... 1 Door Guard Shim...... 10 Letters A-F, Solid Brass...... 1 Letters, Solid Brass...... 1 VIII. SLIDING DOOR LOCKS Numbers, Solid Brass...... 1 Privacy Sliding Door Locks, Heavy Duty...... 11 Passage Sliding Door Locks, Heavy Duty...... 11 II. MISCELLANEOUS DOOR AND WINDOW Privacy Sliding Door Locks...... 11-12 HARDWARE Passage Sliding Door Locks...... 11-12 Window Casement Fasteners...... 2 Pocket Door Locks, Privacy...... 12 ASA Blank Filler Plate...... Pocket Door Locks, Dummy...... 12 Door Silencers...... 3 Latch Guard Protectors...... 3 IX. SECURITY BOLTS Heavy Duty Roller Catch...... 4 Decorative Dutch Door Bolts, Solid Brass...... 13 Surface Bolts, Brass...... 13 III. STRIKES Surface Bolts, Decorative...... 13 Template ASA Strikes...... 2 Surface Bolts, Decorative Heavy Duty Angle Strike..... 13 Extended Lip ANSI Strikes...... 2 Surface Bolt, UL-Listed 8”...... 15 Flat Strikes...... 2 Surface Mounted, UL-Listed 8”, 12”...... 15 Optional T-Strike for ARL-1338...... 4 Security Strikes, Heavy Duty...... 2 X. FLUSH BOLTS Security Strikes, Deadbolts...... 2 AUTO FLUSH BOLTS Drive in Thimble Strikes...... 3 Metal Door Automatic Flush Bolts...... 16 Strike Filler...... 3 Wood Door Automatic Flush Bolts...... 16 Brass Dust Proof Strikes...... 3 COMBINATION FLUSH BOLTS Strike for Privacy SDL...... 11 Metal Door Self-Latching Flush Bolts...... 16 Strike for MB85R and MB86S...... 13 Wood Door Self-Latching Flush Bolts...... 16 Strike for FBG6 and FBGEX12...... 14 SECURITY FLUSH BOLT Strike for MF6341...... 15 Solid Brass Flush Bolt, Round Ends...... 13 IV. KICK / ARMOR AND PUSH/PULL PLATES Solid Brass Flush Bolt, Square Ends...... 13 Armor Plates...... 4 Flip Style Mortise Flush Bolt, 18” Extension Rods...... 14 Kick Plates...... 4 Flip Style Mortise Flush Bolts...... 14 Push Plates...... 4-5 Residential Flush Bolts...... 14 Pull Plates...... 5 Single Route Extension Flush Bolt, Solid Brass...... 14 Single Route Flush Bolt, Solid Brass...... 14 V. DOOR PULLS Lever Extension Flush Bolts, UL-Listed Solid Brass...... 15 Solid Bar Round Pulls...... 6 Commercial Manual Flush Bolt, Stamped Brass...... 15 Solid Bar Handle Pulls...... 6 UNIVERSAL FLUSH BOLTS...... 17 Solid Bar Handle Pulls, Ellipse...... 6 Door Pulls, Heavy Cast Aluminum...... 6 XI. DOOR COORDINATORS Coordinators with Filler Bars, UL...... VI. DOOR KNOCKERS, DOOR VIEWERS 18 Gravity Coordinators, UL...... 18 Door Knockers, Solid Brass...... 7 Carry Bars...... 18 Door Knocker with Viewers...... 7 Mounting Brackets...... 18 Door Viewers, Brass...... 8 Door Viewers, UL...... 8 XII. HANDRAIL BRACKETS Door Viewers, Glass Lens...... 8 Handrail Brackets, Jumbo Heavy Duty...... 19 Door Viewer Covers...... 9 Handrail Brackets, Diecast...... 19 Electronic Digital Door Viewers...... 9 Handrail Brackets, Heavy Duty Cast Aluminum...... 19 Handrail Brackets, Heavy Duty Cast...... 19 VII. DOOR GUARDS ADA-Approved, Handrail Bracket, Heavy Duty Cast...... 19 Privacy Door Latch...... 9 Solid Brass Chain Door Guards...... 10 XIII. DOOR STOPS Swing Bar Door Guards, Zinc Diecast...... 10 WALL DOOR STOPS / BUMPERS Swing Bar Door Guards, Diecast...... 10 Concave Wall Stops, Stainless Steel...... 20 Swing Bar Door Guards, Solid Brass w/ Angle Protector...... 10 Convex Wall Stops, Stainless Steel...... 20

(800) 876-9258 | www.cal-royal.com | OCT 2017 TABLE OF CONTENTS

XIII. DOOR STOPS XIV. CLOSET HARDWARE WALL DOOR STOPS / BUMPERS CATCH AND LATCHES Convex Wall Stops, Solid Brass...... 20 Magnetic Dual Triple Pole Catch, Heavy Duty...... 30 Commercial Grade Wall Door Stops...... 20 Magnetic Triple Pole Catch...... 30 Roller Stops, Solid Brass...... 20 T-Strike for Bullet Catch...... 29 Rigid Door Stops, Solid Brass...... 21 PULLS Flexible Door Stops...... 21 Solid Brass Drawer Pulls...... Rigid Door Stops, Cast...... 21 29 Bi-Fold Ball Knob Pulls...... Flexible Snap on Door Stops, Heavy Duty...... 21 30 Bi-Fold Ball Knob Back Plates...... Flexible Door Stops, Heavy Duty...... 21 30 Bi-Fold Concave Knob Beveled Edge Pulls...... Rigid Door Stops, Diecast Jumbo...... 21 30 Drive in Finger Pulls...... Wall Door Stops, Stainless Steel...... 21-22 30 COAT AND HAT HOOKS...... FLOOR DOOR STOPS 30 Commercial Grade Floor Door Stops, Heavy Duty...... 22 XV. DOUBLE-ACTING FLOOR SPRING HINGE..... 31 Security Door Stops...... 22 Goose Neck Floor Stops...... 22-23 XVI. CRASH CHAIN AND BOLTS Small Goose Neck Floor Stops...... 23 Single Spring Crash Chain Doors...... 31 Dome Stops, Floor...... 23 Super Heavy Duty Chain Doors...... 31 Dome Stops, Heavy Duty Cast Brass...... 23 24” Chain Bolt Hardened Steels...... 31 Risers for Dome Stops...... 23 XVII. SURFACE OVERHEAD DOOR HOLDER Stainless Steel, Floor Stops...... 24 & STOPS DOOR HOLDER/STOPS CR550 Series...... 32 Kick Down Door Holders, Zinc Diecast...... 24 Kick Down Door Holders, Solid Brass...... 24-25 XVIII. SIGNS Vinyl Rubber Stops...... 24-25 HANDICAP RESTROOM SIGNS (ADA) W/ BRAILLE Kick Down Door Holders, Cast Iron...... 25 Boys Signs...... 33-34 Commercial Grade Door Stops, Heavy Duty...... 25 Girls Signs...... 33-34 HINGE PIN DOOR STOPS Men Signs...... 33-34 No Smoking Signs...... Hinge Pin Stops, Heavy Duty...... 26 33-34 Unisex Restroom Signs...... Hinge Pin Stops, Light Duty...... 26 33-34 Women Signs...... Hinge Pin Door Stops, Deluxe...... 26 33-34 Exit Signs...... Hinge Pin Door Stops, Jumbo...... 26 33 Restroom Signs...... Hinge Pin Door Stops, Jumbo Heavy Duty...... 26 33 DECALS AND STICKERS Hinge Pin Door Stops, Residential...... 26 Blue insignia handicap logos...... 34 XIV. CLOSET HARDWARE Blue square plastic sign & handicap logos...... 34 CLOSET RODS & SUPPORTS These doors ... unlocked during business hours...... 34 Adjustable Closet Rods...... 27 These doors ... unlocked when building is occupied... 34 Adjustable Shelf and Rod Support...... 27 This door... unlocked during business hours...... 34 Adjustable Shelf Support Only...... 27 This door ... unlocked when building is occupied...... 34 Heavy Duty Shelf & Rod Support...... 28 CALIFORNIA-APPROVED RESTROOM SIGNS W/ Single Shelf & Rod Support...... 27 BRAILLE Oval Closet Rods...... 27 Exit Signs...... 35 POLE SOCKETS Handicap Accessible Signs...... 35 Closet Pole Sockets...... 28 Men Signs...... 35 Steel Closet Pole Sockets...... 28 Restroom Signs...... 35 Wood Closet Pole Sockets...... 28 Unisex Restroom Handicap Signs...... 35 CATCH AND LATCHES Women Signs...... 35 Adjustable Ball Catch with Full Lip...... 28 Adjustable Ball Catch, Solid Brass...... 28 XIX. SLIDING DOOR HARDWARE Adjustable Drive-In Ball Catches...... 29 STAINLESS STEEL DOOR HARDWARE (SDH SERIES) Jumbo Roller Catch...... 28 SDH Series for Wood Doors...... 36 Adjustable Roller Catch...... 29 SDH Series for Wood and Glass Doors...... 36 Bullet Catches...... 29 BLACK BARN DOOR HARDWARE (BDH SERIES) BDH Series for Wood Doors...... 37 (800) 876-9258 | www.cal-royal.com | OCT 2017 NUMBERS AND LETTERS ILLUSTRATION ITEM SIZE ITEM # FINISH Height: 2” 3 Thickness: /16” SBN2 US3 Width: Varies Height: 3” US15, 3, Thickness: 3 SBN3 /16” US10B Width: Varies Solid Brass Numbers Height: 4” US15, 3, Thickness: 3 SBN4 /16” US10B, 26 Width: Varies

Height: 8” 9 Thickness: /32” SBN8 US3 Width: Varies

Height: 5” US3, 15, Diecast Numbers Thickness: 7 ZN5 /32” US10B Width: Varies

Height: 2” 7 Thickness: /32” SBL2 US3 Width: Varies

Height: 2” US3 (A-Z), 7 Solid Brass Letters Thickness: /32” SBL3 US15(A-H), Width: Varies 10B (A-F)

Height: 4” US3 (A-Z), 7 Thickness: /32” SBL4 US15,10B, Width: Varies 26 (A-F)

PN20BK Black Diecast Height: 4” 3 Numbers (0-9) Thickness: /32” and Letters (A-F) Width: Varies PN20US3 US3

Individually Poly-bagged. Packed with Flat Head Screws Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

1 (800) 876-9258 | www.cal-royal.com | OCT 2017 MISCELLANEOUS DOOR AND WINDOW HARDWARE ILLUSTRATION ITEM SIZE ITEM # FINISH

Window Casement 1 ⅝” х ⅞” SBCF222 Fasteners, Solid Brass Projection: 1 ⅜” US3, 26, 19, ►► Packed with screws and two US15, 5, strikes US15A, 10B, 1 1 ►► Conforms to ANSI / BHMA 2 /16” х 1 /16” SBCF333 US26D 156.16 Projection: 1 ⅞” ►► Architectural finishes available

1 Bolt Projection: /2” Escutcheon Dimension: US10B, 26, Door / Window Casement 7 11 /8” x 1 /16” DL402361 US15, 26D, Security Latch Lock 5 Thumbturn: /8” x 1” US3, 5 7 3 Strike: /8” x 1 /4”

Template ASA Strike US32D ASA478 US26, 10, Stainless Steel 4 ⅞” х 3 ⅜” x 1 ¼” US3, 10B US26D, 26, Template ASA Strike, ASAST US10, 3, Steel Base US10B

4 ⅞” x 3 ⅜” x 1 ¼”, US32D, Extended Lip ANSI Strike, 3 Stainless Steel 1 /4” Lip Extension EXASA-175 Duro from Screw Center Line

Flat Strike, Stainless Steel

►► To be used for pair of doors on 4 ⅞” х 3 ⅜” x 1 ¼”, US32D, 10B inactive door, not to cut out the 4 ⅛” CTC FLAST-46 flat astragal ►► Packed with screws

Heavy Duty Security Strike US3, 26, 15, ►► Includes: 3 ⅝” x 1 ⅞” SDTP3625 2 pcs #10 x 2 ½” and US10B,15A 2 pcs #10 x ¾” Wood Screws

Deadbolt Security Strike ►► Includes: 3 ⅝” x 1 ¼” SS114358 US3 2 pcs #12 x 3” 2 pcs #12 x 1 ¼” wood screws

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

2 (800) 876-9258 | www.cal-royal.com | OCT 2017 MISCELLANEOUS DOOR AND WINDOW HARDWARE ILLUSTRATION ITEM SIZE ITEM # FINISH

Drive In Thimble Strike ►► Steel Construction Length: 1 ⅛” DTS80 Zinc ►► ZINC Plated Diameter: 1” ►► With 1 ¼” Screw

ASA Blank Filler Plate 1 7 1 /4” x 4 /8” ASA-FP --- Used for Door Frames

1 7 1 /4” x 4 /8” Strike Filler 5 1 /8” at Lip SF --- Used for Door Frames Thickness: 10 Ga.

Door Silencer for Metal Frames ►► Absorb Shock and Reduce Noise of Door Closing Length: ½” ►► Prevents door rattling DSM21 Rubber ►► Provides tension for door Diameter: ½” latches / locks ►► Conforms to ANSI / BHMA 156.16, L03011

Door Silencer for Wood Frames

►► Absorb Shock and Reduce Noise of Door Closing Length: ¾” DSW85 Rubber ►► Prevents door rattling Base: ⅜” x ¾” ►► Provides tension for door latches / locks ►► Conforms to ANSI / BHMA 156.16, L03021

LPG2 Latch Guard Protector USP, Alum 2 ⅞” x 11” LPG2 ►► Universal latch guard for Duro, Gold out-opening doors ►► Fits most single, double and GJLPG2 mortise locks 3” x 11 ½” GJLPG2 US32D ►► Conforms with ANSI / BHMA 156.2 Series 4000 Brass Dust Proof Strike ►► Spring tension calibrated for Face Plate: positive closing and eliminates 1 ⅜” x 2 ⅞” US26D, 26, DPSTRK1 binding Barrel: 1” diameter US3, 10B ►► Can be locked in up position Depth: 2 ¼” ►► Conforms to ANSI / BHMA 156.16 L14011 Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

3 (800) 876-9258 | www.cal-royal.com | OCT 2017 MISCELLANEOUS DOOR AND WINDOW HARDWARE ILLUSTRATION ITEM SIZE ITEM # FINISH

Heavy Duty Roller Catch Face Plate: ►► Adjustable Nylon Roller with 1” x 3 ⅜” US3, 26, 19, US15, 5, Square Heavy Duty Cast Full Lip Strike: ARL-1338 2 ¼” Full-lip Strike ⅛” x 1” x 3 ⅜” US15A, 10B, ►► Conforms to ANSI / BHMA 13 US26D A156.16, E19091 Depth: 1 /16”

Optional T-Strike for Heavy US26D, 26, Duty Roller Catch ARL1338 US19, 15, 5, 2 ¾” x 1 ½” x 1 ¾” ARLSTRK62 ►► Architectural finishes available US3, 15A, ►► Packed with screws US10B KICK / ARMOR PLATES BKICK834 US32D 0.050” x 8” x 34” KICK834 US10B Metal Kick Plates ►► Conforms to ANSI / BHMA 0.040” x 8” x 34” AKICK834 US32D A156.6 BKICK1034 US32D ►► Packed with #6 x ⅝” screws 0.050” x 10” x 34” KICK1034 US10B 0.040” x 10” x 34” AKICK1034 US32D Stainless Steel Kick Plates ►► Conforms to ANSI / BHMA J102 0.050” x 10” x 46” BKICK1046 US32D ►► Packed with #6 x ⅝” screws

Stainless Steel Kick Plates ►► Conforms to ANSI / BHMA J102 0.050” x 12” x 34” BKICK1234 US32D ►► Packed with #6 x ⅝” screws

Aluminum Kick Plate 0.032” x 6” x 34” ANO634 ►► Conforms to ANSI / BHMA US3/4, 0.032” x 8” x 34” ANO834 A156.6 US10B, 15 ►► Anodized Aluminum finish ►► Packed with #6 x ⅝” screws 0.032” x 10” x 34” ANO1034

Stainless Steel Armor Plates 0.050” x 34” x 34” BARM3434 US32D ►► Conforms to ANSI / BHMA J101 ►► Packed with #6 x ⅝” screws 0.050” x 34” x 36” BARM3436 US32D PUSH / PULL PLATES

Push Plate ►► Individually packed with 0.050” x 3 ½ ” x 15” PSPL3515 US32D, protective film and screws US10B,10, ►► Easy installation ►► Conforms to ANSI / BHMA US5, 4, 3, A156.6 0.050” x 4” x 16” PSPL4016 US26 ►► Architectural finishes available Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

4 (800) 876-9258 | www.cal-royal.com | OCT 2017 PUSH / PULL PLATES ILLUSTRATION ITEM SIZE ITEM # FINISH

Pull Plate 0.050” x 3 ½” x 15” PULPL3515 US32D, ►► One piece mounted US26, 10, ►► Conforms to ANSI / BHMA US5, 4, 3, A156.6 0.050” x 4” x 16” PULPL4016 US10B ►► Architectural finishes available

9 5 Stainless Steel Plate: 3 /16” X 16 /16” 1 Push / Pull Plate Projection: 1 /8” ►► BHMA: J303 (29 mm) CMBOPUL3516 US32D 5 ►► Fasteners: Six (6) #6 x /8” Gauge: 0.125” NEW ITEM OPH tapping screws (3.5 mm)

1 3.5” x 15” 1000 US32D, Pull Plate Solid Bar Round ¾” dia. 2 /4” Proj. 1000 Series 6”CTC 4” x 16” 1001 US10B, 3 5 ►► Meets ANSI 156.6 for 2 /8” Proj. 1001ADA* US32D

1 3.5” x 15” 1002 US32D, J401 Pulls ¾” dia. 2 /4” Proj. ►► 18 Gauge (0.050”) Plate 8”CTC 4” x 16” 1003 10B, 3 5 ►► Clearance from plate to 2 /8” Proj. 1003ADA* US32D handle: 1” dia. 3.5” x 15” 1004 US32D, 7 2 ½” Proj. ADA: 1 /8” 8”CTC 4” x 16” 1005 10B, 3 1 7 Non-ADA: 1 /2” 2 /8” Proj. 1005ADA* US32D 1” dia. 3.5” x 15” 1006 US32D, *ADA - Americans with 2 ½” Proj. 10”CTC 4” x 16” 1007 10B, 3 Disabilities Act Approved 7 2 /8” Proj. 1007ADA* US32D 1 ENGRAVED LETTERS 3 /2” x 15” Stainless Steel Pull Plate ¾” dia. Projection: PULL1000 3 1 ►► With /4” “PULL” engraved in 6”CTC 2 /4” black color 4” x 16” PULL1001ADA* ►► BHMA: J401 ¾” dia. Projection: ►► Fasteners: 5 2 /8” PULL1003ADA* a. Round Pull Bar Plates: 8”CTC 1 »» (6) #6 x /2” S S s c r e w s ; 1” dia. 1 1 4” x 16” PULL1005ADA* »» (2) # /4”-20 x 2 /2” S t e e l s c r e w s ; 8”CTC US32D »» (2) Steel washers Projection: 1” dia. 7 2 /8” b. Ellipse Pull Bar Plates: 10”CTC PULL1007ADA* 1 »» (6) #6 x /2” SS screws; 1 1 2 »» (2) # 10-32 x 2 /4” Steel screws; 3 / ” x 15” »» (2) Steel washers ELLIPSE Projection: PULL001 3 BAR 1 /4” *ADA - Americans with 6”CTC 4” x 16” NEW ITEM Disabilities Act Approved Projection: PULL002 3 1 /4”

ENGRAVED LETTERS 1 3 /2” x 15” PUSH003 Stainless Steel Push Plate ►► ANSI / BHMA A156.6 US32D 3 ►► With /4” “PUSH” engraved in black color 4” x 16” PUSH004 NEW ITEM

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

5 (800) 876-9258 | www.cal-royal.com | OCT 2017 DOOR PULLS ILLUSTRATION ITEM SIZE ITEM # FINISH

Solid Bar Round Pull 1” diameter, 10” CTC ►► Stainless Steel, Brass and PUL200 Aluminum material Projection: 2 ½” ►► Type 1 Thru-Bolt Mount for 1 ¾” thick doors US3, 32D ►► Individually packed ►► Easy installation 1” Diameter, 8” CTC PUL201 ►► Architectural finishes Projection: 2 ½” available

¾” Diameter, 10” CTC PUL202 US3, 32D Projection: 2 ¼” Solid Bar Round Pull ¾” Diameter, 8” CTC US3, 10B, PUL203 ►► Stainless Steel, Brass and Projection: 2 ¼” US32D, ALUM Aluminum material ►► Type 1 Thru-Bolt Mount for ¾” Diameter, 6” CTC US3, 10B, PUL204 1 ¾” thick doors Projection: 2 ¼” US32D, ALUM ►► Individually packed ►► Easy installation ¾” Diameter, 5 ½” CTC US3, 15, 10B, ►► Architectural finishes PUL205 Projection: 2 ¼” US32D, Alum available ⅝” Diameter, 5 ½” CTC US3, 10B, PUL206 Projection: 2” US32D, Alum

Solid Bar Pull Handle ⅜” x 1¼”, 10” CTC US3, 10B, PUL207 ►► Stainless Steel, Brass and Projection: 2” US15, 28 Aluminum material ⅜” x 1¼”, 8” CTC US3, 10B, ►► Type 1 Thru-Bolt Mount for PUL208 1 ¾” thick doors Projection: 2” US15, 28 ►► Individually packed ►► Easy installation ⅜” x 1¼”, 6” CTC US3, 10B, PUL209 ►► Architectural finishes Projection: 2” US15, 26, 28 available

Solid Ellipse Pull Handle ⅞” x ½” Ellipse, 5 ⅛” CTC ►► Stainless Steel, Brass and PUL210 US3, 28 Aluminum material Projection: 1 ¾” ►► Type 1 Thru-Bolt Mount for 1 ¾” thick doors ►► Individually packed ¾” x ½” Ellipse, US3, 10B, ►► Easy installation 5 ½” CTC PUL211 US15, 15A, 26, ►► Architectural finishes available Projection: 1 ¾” US26D, 32D

Heavy Cast Aluminum Door Pull 7 ⅜” x 1 ½” PULL715 Alum, Duro ►► Exposed Screws Projection: 2 1/16” ►► Thru-Bolt option included for NEW ITEM heavy duty installation Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

6 (800) 876-9258 | www.cal-royal.com | OCT 2017 DOOR KNOCKERS AND VIEWERS ILLUSTRATION ITEM SIZE ITEM # FINISH

Solid Brass Door Knocker Dimensions: US3, 5, US10B, ►► Conforms to ANSI / BHMA 3” x 6 ⅜” SBDK356 US26, 26D,15, A156.16 L23151 Screw Holes: ►► Architectural finishes available US15A ►► Similar to IVES #3125 4 ⅛” CTC

Bore: 9/16” Solid Brass Door Knocker Size: 3” x 6 ⅜” With 180° Door Viewer Screw Holes: SBDK / US3 ►► Conforms to ANSI / BHMA 4 ⅛” CTC DV180 A156.16 L23151 For Doors: 1 ⅜” - 1 ¾” thick

Solid Brass Door Knocker Dimensions: 2 ⅛” x 3 ¾” US3,10B, ►► Conforms to ANSI / BHMA SSBDK234 A156.16 L23151 Screw Holes: US15 ►► Similar to IVES #3102 3 ⅜” CTC

Door Knocker With OPTIONAL 160° Viewer For Doors: DK93 US3, 5, 26D, ►► Conforms to ANSI / BHMA 1 ⅜” - 1 ¾” thick (Non-UL) US10B, 15, 15A A156.16 L23151 Dimensions: ►► Diecast material 1 ¾” x 4” ►► ULDK93 is UL Listed for Screw Holes: 90-minute doors ULDK93 US3, 5, ►► Architectural finishes available 2 ½” CTC (UL-Listed) US26D, 15 ►► UL Listed

Bore: 9/16” Door Knocker With Size: 2 ⅜” x 5 ½” 180° Viewer For Doors: US3, 5, 26D, ►► Conforms to ANSI / BHMA 1 ⅜” - 1 ¾” thick DK94 A156.16 L23151 US10B, 15, 15A Screw Holes: ►► Diecast material ►► Architectural finishes available 3 ⅜” CTC Non UL

Door Knocker With ½” Bore 160° Viewer w/ Name Card Size: 2” x 4 ¾” For Doors: ►► Conforms to ANSI / BHMA DKN95 US3, 5 A156.16 L23151 1” - 1 ¾” thick

►► Diecast material Screw Holes: (US5) AVAILABLE ►► Architectural finishes available WHILE 3 ⅜” CTC SUPPLIES LAST

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

7 (800) 876-9258 | www.cal-royal.com | OCT 2017 DOOR VIEWERS ILLUSTRATION ITEM SIZE ITEM # FINISH

Brass Door Viewer, 160° Plastic Lens Bore: ½” US3, 5, 26, ►► Conforms to ANSI / BHMA For Doors: DV90 US26D, 15, 1 A156,16 L23172 1 ⅜” - 2 /4” thick US10B ►► Architectural finishes available

Bore: ½” US3, 5, 26, For doors: DV91 US26D, 15, Brass Door Viewer, 1 ⅜” - 2” thick US10B 180° Plastic Lens ►► Conforms to ANSI / BHMA A156,16 L23172 ►► Architectural finishes available Bore: 9/16” US3, 5, 26, For doors: DV180 US26D, 15, 1 ⅜” - 2” thick US10B, 15A

Door Viewer, 160° Glass Lens ►► UL Listed For 90-Minute Bore: ½” US3, 15, 26, Doors For doors: ULDV160 US26D, 10A, ►► Conforms to ANSI / BHMA 1 ⅜” - 2” thick US10B A156,16 L23172 ►► Architectural finishes available

Bore : 9/16” US3, 15, 26, For doors: ULDV200 US26D, 10A, 1 Door Viewer, 200° 1 ⅜” - 2 /4” thick US10B Glass Lens ►► UL Listed For 90-Minute Doors ►► Conforms to ANSI / BHMA A156,16 L23172 Bore : 9/16” US3, 15, ►► Architectural finishes available For doors: 10ULDV201 US26D,10B 1”- 1 ⅜” thick

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

8 (800) 876-9258 | www.cal-royal.com | OCT 2017 DOOR VIEWERS ILLUSTRATION ITEM SIZE ITEM # FINISH

200° Door Viewer with Heavy 1” Head diameter 9 US3, 10B, Duty Privacy Cover Bore: /16” PRIULDV200 US15, 26, ►► UL Listed for 20 minutes For doors: 1 US26D ►► Architectural finishes available 1 ⅜” - 2 /4” thick

NEW ITEM

Cover: ½” To be used with: COV160 DV90, DV91, COV160 ULDV160 door viewers US3, 15, Door Viewer Cover US10B, 9 Cover: /16” US26D To be used with: COV200 COV200 DV180, ULDV200, ULDV201 ELECTRONIC DIGITAL DOOR VIEWER

Electronic Digital Door Viewer 1 1 ►► Supported Existing Door Bores • /2” - 1 /8” Diameter ►► Fully Integrated Digital Camera (13mm - 29mm) and LCD Display • 3.5” TFT, (90mm) ►► Quick and Easy Installation • 320x240 resolution Silver, Duro, ELDVBEL150 ►► Clear Large Image 0.3 Mega LCD Viewer Gold Pixels CMOS Resolution Screen size ►► Easy Operation • 8.5oz (240g) Net ►► Convenient for children and elderly Weight ►► Provides additional privacy ►► 3 x AA Batteries DOOR GUARDS

Height: 2 ⅛” Privacy Door Latch Width (Base): 1 ½” US26D, 26, ►► HPDL258 Zinc Diecast material Weight: 0.65 lbs/unit US3, 4, 10B ►► Architectural finishes available Opening Angle: 87°

NEW ITEM

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

9 (800) 876-9258 | www.cal-royal.com | OCT 2017 DOOR GUARDS ILLUSTRATION ITEM SIZE ITEM # FINISH

Solid Brass Chain Door Guard ►► Welded solid steel chains US3, US5, to prevent forced entry Chain: 6 ¾” DG22 ►► Conforms to ANSI / BHMA US26 156.16 ►► Architectural finishes available

Zinc Diecast Swing Bar Door Guard US3, 4, 5, 1 1 ►► Ball Bearing Stop Guide 2 /16” x 4 /4” BBDHG88 US26, 26D, ►► Diecast material US10B ►► Architectural finishes available

Diecast Swing Bar Door Guard US3, 4, 10B, ►► Protective rubber insert on both 2 ½” x 4 ½” PDG88 sides of arm US26, 26D ►► Architectural finishes available

Solid Brass Door Guard Packed With Angle Protector ►► Ball Bearing stop guide ►► Packed with Door Angle US26D, 3, 4, Arm length: 4 ¾” SBDG00 Protector to avoid scarring the US26, 10B door or frame ►► Conforms to ANSI / BHMA 156.16 ►► Architectural finishes available

Door Angle Protector ►► Door angle protector comes with adhesive and individual screw Thickness: 0.036” US26D, 26, for secure mounting Dimensions: DAP77 US3, 4, 5, ►► Designed for use with ½” x 1” x 1 ⅛” US10B BBDHG88 and PDG88 ►► Architectural finishes available

Door Guard Shim ►► To be used when face of door Dimensions: 5 is recessed from face of jamb ⅝” x 2 /16” DGS39 Black ►► Fits under Door Guard Thickness: ⅛” ►► Use with BBDHG88 and PDG88

Door Guard Shim ►► To be used when face of door Dimensions: is recessed from face of jamb. 11 1 ⅛” x 1 /16” DGS100 Black ►► Fits under Door Guard sector Thickness: ⅛” which attaches to door ►► Use with SBDG00 Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

10 (800) 876-9258 | www.cal-royal.com | OCT 2017 SLIDING DOOR LOCKS ILLUSTRATION ITEM SIZE ITEM # FINISH

Heavy Duty Privacy Sliding Door Lock Function Standard Door Prep: ►► Heavy Duty 2 ⅞”(L) x 1 ¾”(W) US3, 5, 26, ►► Privacy sliding door lock function can be used on: PRIPDL21 US26D, 15, ►► Easy installation onto 1 ⅜” and 1 ¾” door US15A, 10B pocket-type interior doors with just a simple cut in door edge thickness ►► Architectural finishes available

Heavy Duty Passage Standard Door Prep: Sliding Door Lock Function 2 ⅞”(L) x 1 ¾”(W) US3, 5, 26, ►► Heavy Duty can be used on: PASPDL34 US26D, 15, ►► Passage sliding door lock function 1 ⅜” and 1 ¾” door US15A, 10B ►► Architectural finishes available thickness

US3, 5,10B Standard Door Prep: Privacy Sliding Door Lock US19, 26, 2 ¼” (L) x 1 ¾” (W) ►► Comparable to Quality No. 101 US26D, 15, For use on doors: ►► Sliding door lock and pull for SDL16 US15A, 1 ⅜’’ - 1 ¾’’ thick passageway (pocket) doors US5/26 ►► Decorative Coined Edges Use SDLPIN for US3/26 ►► Reversible (Non-Handed) 1 ¾” doors

Passage Sliding Door Lock US3, 5, 10B ►► Comparable to Quality No. 100 Standard Door Prep: US19, 26, ►► Sliding door lock and pull for 2 ¼” (L) x 1 ¾” (W) SDL17 US26D, 15, passageway (pocket) doors For use on doors: ►► Easy installation onto pocket-type US15A, 1 ⅜ and 1 ¾’’ thick interior doors with just a simple US3/26 cut in door edge

Strike US3, 5, 26, Dimensions: STRKSDL US26D,15, ►► Strike for privacy SDL 0.046” x 1” x 2 ¼” ►► Architectural finishes available US15A, 10B

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

11 (800) 876-9258 | www.cal-royal.com | OCT 2017 SLIDING DOOR LOCKS ILLUSTRATION ITEM SIZE ITEM # FINISH

Privacy Sliding Door Lock ►► 2 ⅜” Backset 1 ⅜” to 1 ¾” US10B, 15 ►► 18SDLR With easy pop-up finger pull Door Thickness US26, 26D ►► Easy installation onto pocket-type interior doors

Privacy Sliding Door Lock ►► 2 ¾” Backset 1 ⅜” to 1 ¾” 20SDLR US26D ►► With easy pop-up finger pull Door Thickness ►► Easy installation onto pocket-type NEW ITEM interior doors

Passage Sliding Door Lock ►► 2 ⅜” Backset 1 ⅜” to 1 ¾” US10B, 15 ►► 14SDLR With easy pop-up finger pull Door Thickness US26, 26D ►► Easy installation onto pocket-type interior doors

Passage Sliding Door Lock ►► 2 ¾” Backset 1 ⅜” to 1 ¾” 30SDLR US26D ►► With easy pop-up finger pull Door Thickness NEW ITEM ►► Easy installation onto pocket-type interior doors

1 ⅜” Door Thickness RSDL20 Privacy Pocket Door Lock US3, 5, ►► Auto-catch Lock Mechanism US10B, 15, 1 ►► Fits standard 2 /8” Door Prep US15A, 19, ►► Easy installation onto pocket-type US26, 26D interior doors 1 ¾” Door Thickness 134RSDL20

1 ⅜” Door Thickness RSDL40

Dummy Pocket Door Lock US3, 5, ►► Fits standard 2 1/8” Door Prep US10B, 15, ►► Easy installation onto pocket-type US15A, 19, interior doors US26, 26D 1 ¾” Door Thickness 134RSDL40

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

12 (800) 876-9258 | www.cal-royal.com | OCT 2017 SECURITY BOLTS ILLUSTRATION ITEM SIZE ITEM # FINISH

Solid Brass Decorative 4” DDSB4 Dutch Door Bolt ►► Heavy Duty with decorative 8” DDSB8 design adapts to any decor US3, 5 ,26, ►► Packed with mortise and 12” DDSB12 US15, 15A, universal strikes US10B ►► 1 ¼” diameter decorative knob 18” DDSB18 ►► Conforms to ANSI / BHMA 156.16 ►► Architectural finishes available 24” DDSB24

Angle Strike US3, 5 ,26, Screw Holes: ►► Solid Brass Base ANGSTRK US15, 15A, ►► Packed with screws 1 ⅜” CTC US10B ►► Architectural finishes available

Brass Surface Bolt 3” SB873 ►► Brass construction ►► Packed individually 4” SB874 US3, 5 ,26, ►► Poly-bagged with 2 strikes and US15, 15A, screws 6” SB876 US10B ►► Architectural finishes available ►► BHMA LO4151 12” SB8712

Decorative Surface Bolt ►► Packed individually 4” DCSB4 ►► Poly-bagged with 2 strikes and US3, 5,15, screws US15A,10B, ►► Comparable to IVES #043 US26, 26D ►► Conforms to ANSI / BHMA 156.16 6” DCSB6 ►► Architectural finishes available Solid Brass Flush Bolts ►► Designed for superior strength and smooth operation MB85R ►► Deep cup finger hole and Bolt Head: (Round Edge) double action spring combine Diameter: ½” US3, 5,10B MB85R to assure ease of operation Throw: 1” US15, 15A, and automatic holding of bolt Length: 6 ” US26, 26D in either projected or retracted position Width: ¾” MB86S MB86S ►► Includes strike and fastener (Square Edge) ►► Architectural finishes available ►► BHMA LO4201

Strike for MB85R and MB85S Size: 1” x 2” US3, 5, 15, ►► Individually poly-bagged Screw holes: STRKMB85R US15A, 26, ►► Packed with 2 screws 1 ⅜” CTC US26D, 10B ►► Architectural finishes available

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

13 (800) 876-9258 | www.cal-royal.com | OCT 2017 SECURITY BOLTS ILLUSTRATION ITEM SIZE ITEM # FINISH

Solid Brass Single Dimensions Route Flush Bolt Length: 7” US3, 5, 26, ►► Designed for superior strength and Width: ¾” FBG6 US26D, 15, smooth operation Bolt Head ►► Individually poly-bagged 5 US15A, 10B ►► Packed with strike and 2 sets of screws Diameter: /16” 3 ►► Architectural finishes available Throw: /4”

Strike for FBG6 and Dimensions US3, 5, 26, FBGEX12 1 ½” x ⅝” STRKFBG6 US26D, 15, ►► Individually poly-bagged Screw Holes ►► Packed with screws US15A, 10B ►► Architectural finishes available 1” CTC

Solid Brass Single Route Dimensions Extension Flush Bolt Length: 7 ½” ►► Rounded at both ends ►► Designed for superior strength and Width: ¾” US3, 5, 26, smooth operation Bolt Head FBGEX12 US26D, 15, 5 ►► Individually poly-bagged Diameter: /16” US15A, 10B ►► Packed with strike and 2 sets of screws Throw: ⅞” ►► Architectural finishes available Rod Length: 18”

Flip Style Mortise Dimensions Flush Bolt US3,US5, Length: 7” ►► Designed for superior strength and US10B, 15, Width: ¾” FLPFB400 smooth operation US15A, 26, ►► Individually poly-bagged Throw: ¾” US26D ►► Packed with strike and 2 sets of screws Strike 1 ½” L x ⅝” W ►► Architectural finishes available

Flip Style Mortise Flush Bolt with Dimensions: 18” Extension Rod 7 US3,US5, Length: 7 /16” ►► Designed for superior strength and US10B, 15, smooth operation Width: ¾” EXTFB-1 11 US15A, 26, ►► Individually poly-bagged, Throw: /16”; US26D packed per pair Strike 1 ½” L x ⅝” W ►► Packed with strike and 2 sets of screws ►► Architectural finishes available

Solid Brass Single Route Flush Bolt Dimensions ►► Designed for superior strength and Length: 6 ¾” smooth operation US3, 5, Width: ¾” ►► Deep cup finger hole and double action ZDFB800 US26, 26D, spring combine to assure ease of Bolt Head 5 US15, 10B operation and automatic holding of bolt Diameter: /16” in either projected or retracted position 3 Throw: /4” ►► Includes strike and screws ►► Architectural finishes available Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

14 (800) 876-9258 | www.cal-royal.com | OCT 2017 SECURITY BOLTS ILLUSTRATION ITEM SIZE ITEM # FINISH

Commercial Surface Bolts ►► Offers tamper-resistant mounting Dimensions ►► Can be used for both in-swinging Length: 8”; UL453 and out-swinging doors Width: 1” 5 (SBUL8 US26D ►► Available with both mortise and Bolt Head Diameter: /16” before) universal strikes Throw: 1” ►► Conforms to ANSI / BHMA Projection: 1 ⅝” A156.16, L84161

Heavy Duty Commercial Length: 8”; Width: ¾” UL831 Surface Bolts 5 Projection: 1 /16” (ESBUL50 ►► Offers tamper-resistant mounting Bolt Throw: 1” before) ►► Can be used for both in-swinging and out-swinging doors US26D ►► Available with both mortise and Length: 12”; Width: ¾” UL831-12 versal strikes 5 Projection: 1 /16” ►► Conforms to ANSI / BHMA (ESBUL12 Bolt Throw: 1” before) A156.16, L84161

Solid Brass Lever Extension Body Flush Bolt (UL Listed) Length: 6 ¾”; Width: 1” US3, 4, 5, 1 ►► Non-handed Depth: 1 /8” US19, 10, ►► UL Listed for fire-rated metal doors Guide US10B, 15, ►► Bolt tip is ½” Diameter Length: 2”; Width: 1” 5 MF6341 US15A, 26, ►► Conforms to ANSI / BHMA Thickness: /64” US26D A156.6, L14081 Strike 15 ►► Optional Rod lengths available: Length: 2 ¼”; Width: /16” Almond, 3 12”, 18”, 24”, 36”, 48” Thickness: /32” White ►► Architectural finishes available Rod: ¼” - 20 Threaded

Dimensions: Strike for MF6341 15 2 ¼” x /16” US3, 10B, ►► Individually poly-bagged 3 Thickness: /32” STRKMF US15, 26, ►► Packed with screws Screw Holes US26D ►► Architectural finishes available 1 ⅝” CTC NEW ITEM

Solid Brass Commercial Wood Body Lever Extension Flush Bolt Length: 6 ¾”; Width: 1” ►► Commercial Type Depth: 1 ¼” ►► ⅝” Throw Guide US3, 10B, ►► Especially designed for wood or Length: 2 ½“; Width: 1” WF6341 US26, 26D, 5 composite doors Thickness: /64” US15, 15A ►► Conforms to ANSI / BHMA Strike A156.6, L14081 Length: 2 ¼”; Width: 1” 5 ►► Architectural finishes available Thickness: /64”

Body Stamped Brass Commercial Length: 6 ¾”; Width: 1” Manual Flush Bolt Depth: 1 ¼” ►► Non-handed Guide US3, 10B, ►► Stamped Brass Design Length: 2“; Width: 1” SBFB825 ►► Bolt tip is ½” Diameter 5 US15, 26D Thickness: /64” ►► Optional Rod lengths available Strike 18”, 24”, 36”, 48” Length: 2 ¼”; Width: 1” ►► Architectural finishes available 5 Thickness: /64” Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

15 (800) 876-9258 | www.cal-royal.com | OCT 2017 AUTO FLUSH BOLTS

AUTOFLM1 AUXAUTOFLM1 AUTOFLW22 AUXAUTOFLW22 SLAUTOFLM3 SLAUTOFLW4 AUXSLAFLM3 AUXSLAFLW4

TOP TOP TOP TOP TOP TOP BOLT BOLT BOLT BOLT BOLT BOLT TOP TOP BOLT BOLT

BOTTOM AUXILIARY AUXILIARY AUXILIARY AUXILIARY BOLT FIRE LATCH FIRE LATCH FIRE LATCH FIRE LATCH

BOTTOM BOTTOM BOLT BOTTOM BOLT BOLT

FEATURES AND CONSTRUCTION AUTOFLM1 AUXAUTOFLM1 AUTOFLW22 AUXAUTOFLW22 SLAUTOFLM3 SLAUTOFLW4 AUXSLAFLM3 AUXSLFLW4 UL Listed for (A, B, C, D and E Label) metal fire doors, maximum 8’ in height. Conforms to UL10C and UBC 7-2-1997.     UL Listed for (B, C, D and E Label) wood composite core fire doors, maximum 8’ in height. Conforms to UL10C and UBC 7-2-1997.     Fits standard and ANSI preparation for wood doors.     Fits standard and ANSI preparation for metal doors.     Override feature, prevents damage to doors of frame in case the strike and bolt are not aligned.         Reversible, Non-Handed.         Steel body with stainless steel components, especially designed thermal lock automatically locks inactive door in case of fire.         Smooth easy action, requires 5 lbs of force to actuate cam and piston mechanism, therefore meeting ADA regulations.         Fully automatic, when active door is opened top and bottom bolts are automatically retracted for easy egress. When active door is closed ¾” bolt         projects into the frame, securing latching of inactive leaf. Bolts have 1” vertical adjustment without removing door from frame for unusual conditions.     Bolts have ¾” vertical adjustment without removing door from frame for unusual conditions.     Available in Architectural Finishes. Packed 2 bolts per box with composite installation template.      Available in Architectural Finishes. Packed 1 top bolt and 1 auxiliary fire latch per box with composite installation template. Used where a fire-rating application without a bottom bolt is required. The auxiliary fire latch, mounted     in the door edge, releases under extremely high temperatures to keep the doors in alignment during a fire.

16 (800) 876-9258 | www.cal-royal.com | OCT 2017 UNIVERSAL FLUSH BOLTS

UNIVERSAL AUTOMATIC UNIVERSAL SELF-LATCHING UNIVERSAL FLUSH BOLT & BOTTOM FIRE LATCH BOLT FLUSH BOLT FLUSH BOLT UNIFB820 UNIFB780 UNIFB930 UNIFB540

UNIFB810 UNIFB710 UNIFB710 UNIFB810 TOP BOLT TOP BOLT TOP BOLT TOP BOLT

UNIFB810 UNIFB810 BOTTOM BOLT BOTTOM BOLT

UNIFL001 UNIFL001 BOTTOM FIRE LATCH BOLT BOTTOM FIRE LATCH BOLT

FEATURES & CONSTRUCTION UNIFB820 UNIFB780 UNIFB930 UNIFB540 UL Listed for (A, B, C, D and E Label) metal fire doors, maximum 8’ in height. Conforms to UL10C and UBC 7-2-1997.     UL Listed for ( B, C, D and E Label) wood composite core fire doors, maximum 8’ in height. Conforms to UL10C and UBC 7-2-1997.     Fits standard and ANSI preparation for wood doors.     Fits standard and ANSI preparation for metal doors.     Override feature, prevents damage to doors of frame in case the strike and bolt are not aligned.     Reversible, non-handed.     Steel body with stainless steel components, especially designed thermal lock    automatically locks inactive door in case of fire. (bottom only) Fully automatic, when active door is opened top and bottom bolts are automatically retracted for easy egress. When active door is closed ¾” bolt projects into the frame,    securing latching of inactive leaf. (bottom only)

5 Bolts have /8” vertical adjustment without removing door from frame for unusual conditions.     Available in Architectural Finishes. Packed 2 bolts per box with composite installation template.   Available in Architectural Finishes. Packed 1 top bolt and 1 auxiliary fire latch per box with composite installation template. Used where a fire-rating application without a bottom bolt is required. The auxiliary fire latch, mounted in the door edge, releases under   extremely high temperatures to keep the doors in alignment during a fire.

17 (800) 876-9258 | www.cal-royal.com | OCT 2017 DOOR COORDINATORS ILLUSTRATION ITEM SIZE ITEM # FINISH

UL-Gravity Coordinator ►► Used on pairs of doors with or Projection: 7” FRGCO65 without an astragal ►► Adjustable for ease of installation US26D, 10B, ►► It features a Nylon Roller to US3, 4, 5, enable the inactive door to easily US10, 26 operate the coordinating device ►► Base Material: Forged Brass Projection: 8” FRGCO085 ►► Architectural finishes available ►► BHMA: 4.1.1 Type 25

Door Coordinator ►► Door coordinator for fire labeled doors ►► Automatic coordinating device for Filler Bar sequential closing of paired doors Frame Openings: with or without astragal DORCO1 ►► Non-handed. 60” and 72” ►► For use with frame openings 60”, 72” or 84”. Black Prime ►► Material: All Metal construction Coat, Alum ►► Conforms to ANSI / BHMA A156.3, Type 21A

5 18 /8” for up to FB1858 72” door Filler Bar 5 32 /8” for up to FB3258 96” door

Carry Bar Plate: ►► Used on pair of doors with 3 1 1 /4” x 2 /4” Black Prime astragal Fasteners: CBO-1 ►► For situations when the inactive 1 Coat, Alum /4” x 20 Sex Bolts door can be opened first.

1 MB4250 Jamb Depth: 4 /4” 5 Stop Height: /8” MB4250 Stop Width: 2 ¼” and over Black Prime Mounting Brackets Coat 3 Jamb Depth: 4 /4” 5 Stop Height: /8” MB4750 Stop Width: MB4750 7 1 /8” to 2 /4” and over

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

18 (800) 876-9258 | www.cal-royal.com | OCT 2017 HANDRAIL BRACKETS ILLUSTRATION ITEM SIZE ITEM # FINISH

Jumbo Heavy Duty Handrail Bracket ►► Diecast Aluminum material ►► Contemporary design Wall Mount: ►► Single screw wall mount for 2 ⅛” dia. US3, 5, minimal damage to wall 7 Height: 2 /8” JUHB-28 US15, 15A, ►► Individually poly-bagged ►► Packed with mounting screws Width: 2 ⅛” US26, 10B 7 ►► Easy installation Projection: 2 /8” ►► Conforms to ANSI / BHMA A156.16 L13061 ►► Architectural finishes available

Handrail Bracket ►► Diecast material 7 US3, 5, ►► Individually poly-bagged with Height: 2 /8” 3 US15, 15A, screws Width: 1 /16” HB96 7 US26, 10B, ►► Conforms to ANSI / BHMA Projection: 2 /8” A156.16 L33061 US26D ►► Architectural finishes available

Heavy Duty Cast Aluminum Handrail Bracket US3, 5, ►► Diecast material Height: 3 ¼” ►► Individually poly-bagged with 7 US15, 15A, Width: 1 /16” HDHB40 screws US26, 26D, Projection: 3 ¼” ►► Conforms to ANSI / BHMA US10B A156.16 L33061 ►► Architectural finishes available

Heavy Duty Handrail Bracket ►► Diecast material ►► Contemporary design ►► Individually poly-bagged with Height: 2 ¾” US3, 10B, 3 screws Width: 1 /8” DMHB83 US15, 15A, ►► Easy installation Projection: 3 ¼” US26D, 26 ►► Conforms to ANSI / BHMA A156.16 L13061 ►► Architectural finishes available

ADA-APPROVED Heavy Duty Cast Handrail Bracket ►► Conforms and Meets ADA US3, 5, Regulations Height: 3 ½” ►► Conforms to ANSI / BHMA 5 US10B, 15, Width: 1 /16” ADAHB-4 A156.16 L13061 US15A, 26, Projection: 4” ►► Diecast material US26D ►► Contemporary design ►► Individually poly-bagged with screws ►► Easy installation Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

19 (800) 876-9258 | www.cal-royal.com | OCT 2017 WALL DOOR STOPS / BUMPERS ILLUSTRATION ITEM SIZE ITEM # FINISH

Stainless Steel Concave Wall Stop US32D, 3, 4, ►► Manufactured using Stainless Base Diameter: 2 ½” US5, 15A, Steel or Solid Brass Base Thickness: ⅜” WB26 ►► Conforms to ANSI / BHMA 156.16 3 US26, 10, Overall Proj.: 1 /16” L22251 for Brass and L52251 for US10B, 19 Stainless Steel ►► Architectural finishes available

Stainless Steel Convex Wall Stop ►► Manufactured using Stainless Base Diameter: 2 ½” US32D, 3, Steel or Solid Brass Base Thickness: ⅜” CONWB42 US4, 26, 10, ►► Conforms to ANSI / BHMA 156.16 3 Overall Proj.: 1 /16” US10B L22201 for Brass and L52101 for Stainless Steel ►► Architectural finishes available

Solid Brass Convex Wall Stop ►► Constructed of Solid Brass US3, 4, 15, ►► Tamper-proof mounting Base Diameter: 1” US15A, 26, ►► SWB Included with grey convex rubber Overall Proj.: ½” US26D, 10B, bumper that absorbs impact ►► Comparable to IVES #WS404CVX US19 ►► Architectural finishes available

Commercial Grade Wall Door Stop ►► For high traffic conditions ►► Solid Cast Brass or Bronze heavy duty construction Base Diameter: 2” US3,26D, ►► CWS18 Rubber tip does not scar nor mark Overall Proj: 3 ⅝” US10B surface of door ►► Conforms to ANSI: A156.16, BHMA: L12021, FED SPEC:1320E ►► Architectural finishes available

Commercial Grade Wall Door Stop Base Diameter: 2 ⅛” ►► For high traffic conditions Overall Proj: 3 ⅝” US26D, ►► Solid Cast BrassConforms to 4CWS-21 ANSI: A156.16, BHMA: L12021, Fastener: #10 x 1” US10B FED SPEC:1320E OPHWS w/ plastic ►► Architectural finishes available anchor NEW ITEM ►► With 3 mounting holes

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

20 (800) 876-9258 | www.cal-royal.com | OCT 2017 WALL DOOR STOPS / BUMPERS ILLUSTRATION ITEM SIZE ITEM # FINISH

Solid Brass Roller Stop CURB19 Base: 1 ¾” x 2 ⅛” ►► Constructed in heavy duty CURB19 Cast Brass Overall Proj: 2 ¾” US3, 4, ►► CURB19 is used where two doors US10B, open against each other to prevent US26D damage to the door or hardware Base Dia: 2” SRB82 SRB82 ►► CURB19 conforms to ANSI / BHMA Overall Height: 4 ¼” 156.16, L12212

Solid Brass Rigid Door Stop Mounting Screw: 1” SBRS3 US3, 5, 26, with Molded Screw Projection: 3” ►► Easy installation US26D, 15, ►► Packed with both white and black US15A, Mounting Screw: 1” rubber tip SBRS4 US10B ►► Available in architectural finishes Projection: 4” Flexible Door Stop with Fixed Screw US3, 5, 15, Mounting Screw: ¾” ►► Diecast base FS89 US15A, 26, ►► One Piece Style Projection: 3” US10B ►► Packed with white rubber tip ►► Available in architectural finishes Cast Rigid Door Stop US3, 5, 26, with Molded Screw Mounting Screw: ⅝” US26D, 15, ►► RS92 Easy installation Projection: 3” US15A, ►► Diecast material ►► Available in architectural finishes US10B Heavy Duty Flexible Snap On Door Stop 3 Pieces US3, 5, 26, Mounting Screw: 1 ½” ►► Steel Base SOFS3 US10B, ►► White Rubber Tip Projection: 3” US15A, 15 ►► Available in architectural finishes ►► Comparable to IVES #060 Mounting Screw: ¾” Heavy Duty Flexible Door Stop HDFS3 US3, 5, 26, with Screw and Metal Base Projection: 3 ⅛” US15, 15A, ►► Easy installation Mounting Screw: ¾” JFS13 US10B ►► Available in architectural finishes Projection: 3 ¾”

4” Diecast Jumbo Rigid Stop US3, 5, 26, with Molded Screw Mounting Screw: ¾” JRS34 US15, 15A, ►► Diecast material Projection: 4” US10B ►► Conforms to ANSI / BHMA A156.16

Wall Stop with Plate, Round ►► Stainless Steel wall mount Wood Screw w/ plastic plug: US32D, ►► Easy installation WSPR-02 ►► It can also be used as coat hook #4 x 1” US32 ►► Durable rubber tip Projection: 3 ⅛” NEW ITEM ►► Residential and light commercial use Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

21 (800) 876-9258 | www.cal-royal.com | OCT 2017 WALL DOOR STOPS / BUMPERS ILLUSTRATION ITEM SIZE ITEM # FINISH

Wall Stop No Plate ►► Stainless Steel Wood Screw w/ plastic plug: US32D, ►► Wall mount WSNP-04 ►► Easy installation #10 x 1 ½” US32 ►► Durable rubber tip Projection: 2 7/8 ” NEW ITEM ►► Residential and light commercial use

Wall Stop with Plate, Square ►► Stainless Steel Wood Screw w/ ►► Wall mount plastic plug: US32D, ►► WSPS-01 Easy installation #6 x 1” US32 ►► It can also be used as coat hook 1 8 ►► Durable rubber tip Projection: 3 / ” NEW ITEM ►► Residential and light commercial use

Wall Bumper Concave ►► Stainless Steel Wood Screw w/ plastic plug: US32D, ►► Wall mount WBC-06 ►► Easy installation #8 x 1” US32 NEW ITEM ►► Durable rubber tip Projection: 19/16” ►► Residential and light commercial use FLOOR DOOR STOPS Floor Stops ►► Commercial grade wall floor stop for high traffic conditions. Solid Cast Brass or Base Diameter: 2” US3, 26D, CFS20 Bronze heavy duty construction Overall Height: 3” US10B ►► Architectural finishes available ►► Conforms to ANSI: A156.16, BHMA:L12131, FED SPEC:1328E

Floor Stops ►► Commercial grade wall floor stop for high Base Diameter: 2 ¼” Overall Height: 3 1/8 ” traffic conditions. Solid Cast Brass. US26D, ►► Fastener: #10 x 1” 3CFS-85 Architectural finishes available US10B NEW ITEM ►► Conforms to ANSI: A156.16, OPHWS w/ plastic BHMA:L12131, FED SPEC:1328E anchor ►► With 3 mounting holes

Stud Dimensions: 5 1 /8” x 2 /2” NEW ITEM LSDC-315 Security Door Stops Bumpers: ►► Designed for high traffic, abusive and 1 2” dia. x 3 /2” h security applications Black ►► Flame resistant, resilient material molded Stud Dimensions: around a heavy duty stud 5 1 /8” x 2 /2” SDC-115 Bumpers: LSDC-315 1 SDC-115 2” dia. x 1 /2” h

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

22 (800) 876-9258 | www.cal-royal.com | OCT 2017 FLOOR DOOR STOPS ILLUSTRATION ITEM SIZE ITEM # FINISH Goose Neck Floor Stop ►► Heavy Duty Cast Brass floor stop US3, 4, 5 ►► Smooth and aerodynamic design Base Depth: 1 ¾” US26, 26D, provides minimum obstruction to Overall Height: 2 ⅛” GS118 cleaning efforts US10,10B, Overall Length: 2 ¼” ►► Conforms to ANSI / BHMA 156.16, US15, 15A L12131 for Brass ►► Architectural finishes available Goose Neck Floor Stop ►► Heavy Duty Cast Brass floor stop US3, 4, 5, ►► Smooth and aerodynamic design Base Depth: 1 ⅜” US26, 26D, provides minimum obstruction to Overall Height: 2 ¾” GS119 US10,10B, cleaning efforts Overall Length: 2 ½” ►► Conforms to ANSI / BHMA 156.16, US15, 15A L12131 for Brass ►► Architectural finishes available

Small Goose Neck Floor Stops ►► For light to medium duty doors US3, US5, Height: 1 ¼”; ►► Easy installation US10B, 15, Base: 1 ⅛”; SMGNS-1 ►► Durable vinyl rubber stops that US15A, 26, comes in black or grey Projection: 1 ¼” US26D ►► Solid Brass material ►► Architectural finishes available Floor Dome Stops Base Height: ⅜” ►► For doors with threshold or Overall Height: 1 ⅜” DSHP18 undercut doors US3, 4, 5, Base Diameter: 1 ¾” ►► Heavy Duty Cast Dome Stops US10, 10B, constructed of Solid Brass US15, 15A, DSLP4 ►► DSLP4 conforms to ANSI / BHMA US26, 26D, 156.6, L12141 Low profile Base Height: ⅛” ►► DSHP18 conforms to ANSI / Overall Height: 1” DSLP4 US32D DSHP18 BHMA 156.6, L12161 High Profile Base Diameter: 1 ¾” ►► Architectural finishes available Base Diameter: 1 ¾” Heavy Duty Dome Stop Base: ¼” ►► Heavy Duty Cast Brass dome stop Height: 1 ⅝” US3, 4, 5, Fastener: #14 x 1 ½” US10,10B, designed for both low and high UNDS14 profiles. wood screw w/ plastic US15, 26, ►► Meets ANSI / BHMA 156.1, shield and ¼” - 20 x ¾” US26D L12161 when used as DSLP4 machine screw with lead anchor

Length: 1 ¾” Risers Width: 1 ⅛” RIS375 ►► Extruded Aluminum, mill finish Height: ⅜” ►► For conversion of DSLP4 or US26D DSHP18 Dome Stop for carpet installation Length: 1 ¾” ►► Available in ⅜” and ⅝” height Width: 1 ⅛” RIS625 Height: ⅝” Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

23 (800) 876-9258 | www.cal-royal.com | OCT 2017 FLOOR DOOR STOPS ILLUSTRATION ITEM SIZE ITEM # FINISH Risers ►► Heavy Duty Diecast construction ►► For conversion of DSLP4 or DSHP18 Base Diameter: US3, 4, 5, US10, 10B, Dome Stop for carpet installation or 1 ¾” NEWRIS3750 adapting to threshold use 5 US15, 15A, ►► Conforms to ANSI / BHMA 156.1, L12161 Height: /16” US26, 26D when used with DSLP4 ►► Architectural finishes available Cylindrical Floor Mount Door Stop ►► Stainless Steel Wood Screw w/ plastic plug: US32D, ►► Floor mount EUS-03 ►► Easy installation #4 x 1 1/2” US32 ►► Durable rubber tip Projection: 1 9/16 ” NEW ITEM ►► Residential and light commercial use

Square Floor Mount Door Stop ►► Stainless Steel Wood Screw w/ plastic plug: US32D, ►► Floor mount EUS-05 ►► Easy installation #4 x 1 1/2” US32 ►► Durable rubber tip Projection: 1 9/16 ” NEW ITEM ►► Residential and light commercial use

Floor Mount or Wall Mount Door Stop ►► Stainless Steel Wood Screw w/ plastic plug: US32D, ►► Floor mount or wall mount EUS-07 ►► Easy installation #8 x 1 1/4” US32 ►► Durable rubber tip Projection: 2” NEW ITEM ►► Residential and light commercial use

Door Stop Flat Top ►► Stainless Steel door stop Wood Screw w/ plastic plug: US32D, ►► Floor Mount DSFT-5 ►► Easy installation #10 x1 1/4” US32 ►► Durable rubber tip 13 16 NEW ITEM Projection: / ” ►► Residential and light commercial use DOOR HOLDER / STOPS Solid Brass Kick Down Door Holder US26, 3, 4, ►► Black / Grey Vinyl rubber stop with Arm: 5” SBDH41300 US26D,10, concentric groove design for Base: 1 ¼” x 2” maximum non-slide grip (#RUBSBDH) US10B ►► Conforms to ANSI / BHMA 156.16, L11383 ►► Available in architectural finishes Vinyl Rubber Stop for SBDH41300 and SBDH5 ►► Vinyl rubber stop with concentric groove Base Dia: 1 ⅛” RUBSBDH Grey design for maximum non-slide grip ►► For use as replacement tip for SBDH41300 and SBDH5 Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

24 (800) 876-9258 | www.cal-royal.com | OCT 2017 DOOR HOLDER / STOPS ILLUSTRATION ITEM SIZE ITEM # FINISH Zinc Diecast Kick Down Door Holder US3, 26, ►► Vinyl rubber stop with concentric Arm: 4” DH25 US26D, Base: ⅞” x 1 ¾” groove design for maximum non-slide Duro grip (#RUBDH25) ►► Architectural finishes available Vinyl Rubber Stop for DH25 ►► Vinyl rubber stop with concentric groove design for maximum Base Dia: 1 ⅛” RUBDH25 Grey non-slide grip ►► For use as replacement tip for DH25

IRODH4 IRODH5 Cast Iron Kick Down Door Holder Arm: 4” IRODH-4 ►► Black / Grey Vinyl rubber stop with concentric groove design for Alum, Duro maximum non-slide grip ►► Conforms to ANSI / BHMA 156.16, Arm: 5” IRODH-5 L11383

Solid Brass Kick Down Door Holder ►► Vinyl rubber stop with concentric US3, 26D, groove design for maximum Arm: 5” SBDH5 US10, 10B, non-slide grip (#RUBSBDH) Base: ⅞” x 1 ¾” ►► Conforms to ANSI / BHMA 156.16, US26 L11382 ►► Comparable to IVES #FS455 ►► Architectural finishes available

Heavy Duty Commercial Grade Wall Door Stop ►► For high traffic conditions Base Diameter: 2 ¼” ►► Solid Cast Brass or Bronze heavy Projection: 3 ⅝” duty construction Strike Height: 1 ½” US3, 26, ►► Unit functions as stop but serves as 3 Strike Width: 1 /16” HDWDS99 US26D, a Hold-Open device when hook is Strike Projection: 1” US10B manually engaged in strike ►► Conforms to ANSI / BHMA 156.16, Hook: 2 ¾” BHMA:L11351 for Brass, FED Eye: 1 ⅜” x 1 ⅛” SPEC:1321E ►► Architectural finishes available Floor Door Stop & Manual Holder ►► Solid Cast Brass or Bronze heavy Base Diameter: 2” duty construction Height from floor to stop centerline: 2 ⅝” ►► Unit functions as stop but serves US3,26D, Stop Dia: 1” HDFDSH66 as a Hold-Open device when hook US10B,26 is manually engaged in strike Hook: 2 ⅝” ►► Conforms to ANSI / BHMA 156.16, Eye: 1” x 1 ½” BHMA:L11371, FED SPEC:1329E Overall Height: 3 ⅝” ►► Architectural finishes available Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

25 (800) 876-9258 | www.cal-royal.com | OCT 2017 HINGE PIN DOOR STOPS ILLUSTRATION ITEM SIZE ITEM # FINISH

Jumbo Heavy Duty Hinge Pin Hinge Pin Door Stop with Removable Diameter 5 Nylon Bushing ¼” or /16” IVHP23 US3, 5, 26, ►► Adjustable angle setting HINGE SIZES: (Commercial and US26D, 15, ►► For commercial and residential 3 ½” x 3 ½”, Residential use) US15A, 10B grade hinges 4” x 4”, ►► Comparable to IVES #69, 69F 4 ½” x 4 ½”

Jumbo Hinge Pin Door Stop with Hinge Pin Removable Nylon Bushing Diameter 5 JHP11 US3, 5, 26, ¼” or /16” ►► Easy installation (Commercial and US15, 15A, ►► For use with commercial and HINGE SIZES: Residential use) US10B residential door hinges 3 ½” x 3 ½”, 4” x 4”, ►► Architectural finishes available 4 ½” x 4 ½”

Deluxe Hinge Pin Door Stop with Hinge Pin NHP78 Removable Nylon Bushing US3, 5, 26, Diameter: ¼” (Recommended ►► Easy installation US26D, 15, ►► For use with residential door HINGE SIZES: for Residential US15A, 10B hinges 3 ½” x 3 ½”, 4” x 4” use) ►► Architectural finishes available

Hinge Pin DSLD81 Diameter 5 (Recommended ¼” or /16” for Residential HINGE SIZES: Hinge Pin Stop with Removable use) 3½” x 3 ½”, 4” x 4” Nylon Bushing US3, 5,10B, DSLD81 ►► Adjustable angle setting Hinge Pin US15, 15A, ►► Comparable to IVES #69, 69F Diameter DSHD105 US26, 26D ►► Architectural finishes available 5 ¼” or /16” (Recommended HINGE SIZES: for Commercial 3 ½” x 3 ½”, 4” x 4, 4 use) DSHD105 ½” x 4 ½”

Residential Hinge Pin Hinge Pin HP95 Door Stop with Diameter: ¼” US3, 5, 26, Removable Nylon Bushing (Recommended HINGE SIZES: US15, 15A, ►► Easy installation for Residential 3 ½” x 3 ½”, US10B ►► For use on residential hinges use) ►► Architectural finishes available 4” x 4”

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

26 (800) 876-9258 | www.cal-royal.com | OCT 2017 CLOSET HARDWARE ILLUSTRATION ITEM SIZE ITEM # FINISH 8’ Closet Rod Oval Closet Rod Dimensions: OVLCLR-408 US26 3 ►► Steel material ⅝” x 1 /16” ►► Available in 2 lengths 12’ Closet Rod ►► Individually poly-bagged OVLCRH-20 Dimensions: OVLCLR-5012 US26 3 ⅝” x 1 /16” Closet Rod Bracket Dim: 1 ¼” CTC Projection: ½” ►► Zinc Alloy material OVLCRB-10 US26 OVLCLR-408 / Fasteners: #6 x 1” OVLCLR-5012 ►► Packed 2 pieces in nylon bag with screws Wood Screws Dim: 1 ¼” CTC OVLCRB-10 Closet Rod Holder Projection: 3” NEW ITEM ►► Zinc Alloy material OVLCRH-20 US26 ►► Individually packed in nylon Fasteners: #6 x 1” bag with screws Wood Screws 10” to 30” ACR1830

Adjustable Closet Rod 30” to 48” ACR3048 ►► Sturdy Steel material ►► Individually poly-bagged with 48” to 72” ACR4872 installation screws Bright Zinc ►► Gauge: 0.050” 72” to 96” ACR7296 ►► Adjustable rods in various lengths 72” to 120” ACR72120 ►► Zinc finish 96” to 150” ACR96150

Adjustable Shelf and Rod Support Support shelf up to ►► Sturdy Steel material 14” wide ASR-41 White ►► Individually poly-bagged Rod up to 1½” dia. ►► Screws packed individually with bracket

Adjustable Shelf Support ►► Sturdy Steel material Support shelf up to ADJ42 White ►► Individually poly-bagged 14” wide ►► Screws packed individually with bracket

Single Shelf and Rod Support Support shelf up to ►► Sturdy Steel material 14” wide SR27 White ►► Individually poly-bagged Rod up to 1½” dia. ►► Screws packed individually with bracket

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

27 (800) 876-9258 | www.cal-royal.com | OCT 2017 CLOSET HARDWARE ILLUSTRATION ITEM SIZE ITEM # FINISH

Heavy Duty Shelf and Rod Support Support shelf up to ►► Easy installation 14” wide FSR123 White ►► Individually poly-bagged Rod up to 1 ½” dia. ►► Architectural finishes available

Closet Pole Socket ►► Nylon material 1 ⅜” Pole PS99 White ►► Paired Set

Steel Closet Pole Socket ►► Sturdy Steel material 1 ⅜” Pole MPS3 US3, 26 ►► Paired Set

Wood Closet Pole Socket ►► Natural Wood material 1 ⅜” dia. WDPS 82 Wood Grain ►► Paired Set

Jumbo Roller Catch Size 2” US3, 10B, ►► Steel Construction Strike: 1 ¼” x ⅞” RC88 Zinc ►► Conforms to ANSI / BHMA A156.9 Square Corner B83112

Solid Brass Adjustable Ball Catches Face Plate: ►► Manufactured from Wrought Brass 2 ⅛” x 1” Round Corner US3, 5, 10B ►► Adjustable threaded barrel for SBBC58 Bore: ¾” x 1 ¼” US15, 15A, accommodating various door (Brass) clearances Square Lip Strike: US26, 26D ►► Conforms to ANSI / BHMA A156.9 1 ⅜” x 2 ⅛” B23013 Lip to Center: ⅞” ►► Architectural finishes available

Face Plate: 2 ¼” x 1” Adjustable Ball Catch Square Corner BC97 ►► Manufactured from Wrought Brass Bore: ⅞” x 1 ¼” (Diecast) ►► Adjustable threaded barrel for Round Corner US3, 5, 10B accommodating various door Strike: 1 ⅜” x 2 ¼” US15, 15A, clearances Lip to Center: ⅞” US26, 26D ►► Conforms to ANSI / BHMA A156.9 BC97 B23013 Full Lip Strike Plate ►► Architectural finishes available Round Corner STRKBC97 STRKBC97 for BC97 and DIB1 Size: 1 ⅜” x 2 ¼” Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

28 (800) 876-9258 | www.cal-royal.com | OCT 2017 CLOSET HARDWARE ILLUSTRATION ITEM SIZE ITEM # FINISH

Adjustable Drive-In Ball Catches DIB1 ►► Generally used on closet doors 15/ ” Bore where latch is not used or needed 16 US3, 5, 26, Strike Size: ►► Diecast material US26D, 15, ►► Jamb-mounted lip strike 1 ⅜” x 2 ¼”, US15A, 10B ►► Conforms to ANSI / BHMA Round Corner BLKDIB777 A156.9 B23013 (Bulk Packed) ►► Architectural finishes available

Adjustable Roller Catch ►► Soft latching action. Speed nylon roller for maximum performance Face Plate: ►► Adjustable tension 4 – 17 lbs of 2 ¼” x ⅞” holding power. Installs easily on 13 3 US3, 26D, Bore: /16 x 1 /4” ARCT3350 thin doors. Includes Brass full lip 3 15, US10B Strike: 2 ¼” x 1 /4” strike 13 ►► Conforms to ANSI / BHMA Lip t o Center: /16” A156.16 L27081 for Brass and L87081 for Steel

Hole (door): Bullet Catch 1 ½” dia. X 1 /8” ►► Ideal for cabinets and small door Strikes (Square): US3, 5, 26, installations 5 BULCAT11 /8” x 1 ¼” US15, 10B ►► Made from Wrought Brass ►► Architectural finishes available Strikes (Round): 1 ⅜” x 2 ¼”

T-Strike for BULCAT11 T-Strikes (optional): US3, 5, 26, ►► Natural Wood material 7 TCAT108 /8” x 2 ¼” US15, 10B ►► Paired Set

Dia. of Rod : 5 WP300 3”, /16” Solid Brass Drawer Pull ►► Includes Screws for 1 ¾” – 1 ⅜” thick drawers or doors Dia. of Rod: US3, 26, 26D, 5 WP350 ►► Conforms to ANSI / BHMA A156.9 3 ½”, /16” US10B B22011 ►► Architectural finishes available Dia. of Rod: 5 WP400 4”, /16”

Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

29 (800) 876-9258 | www.cal-royal.com | OCT 2017 CLOSET HARDWARE ILLUSTRATION ITEM SIZE ITEM # FINISH

Heavy Duty Magnetic Catch ►► Dual triple pole. Self-aligning 1 magnets for maximum pull Length: 3 /8” 7 surface or mortise mounted Thickness: /8” steel case Depth: 1” HDMC3270 Aluminum ►► Individually packed with sheet Load Capacity: metal screws, 3 strikes 14 lbs. ►► Conforms to ANSI / BHMA A156.9 B4316

Triple Pole Magnetic Catch 1 ►► Triple pole. Self-aligning magnets Length: 2 /16” for maximum pull. Adjustable Thickness: ⅞” 5 steel case Depth: 1 /32” TPMC3230 Aluminum ►► Individually packed with sheet Load Capacity: metal screws, 1 strike size 6 lbs. ►► Conforms to ANSI / BHMA A156.9

Bi-Fold Ball Knob ►► Diecast material US3, 5, 26, ►► Packed with 1 breakaway screw Diameter: 1 ¼” BK14 US26D, 15, to accommodate different cabinet Height: 1 ⅜” thickness (from 1 ⅝” to 2”) and US15A, 10B one 1 ¾” screw ►► Architectural finishes available

Back Plate for BK14 Bi-fold Ball Knob US3, 5, 26, ►► Diecast material Diameter: 1 ¾” PLA2 US26D, 15, ►► Conforms to ANSI / BHMA A156.9 US15A, 10B B221181 ►► Architectural finishes available

Coat and Hat Hook 7 ►► Diecast material Projection: 2 /8” ►► Individually poly-bagged Base dimension: CH28 US3, 26 ►► Conforms to ANSI / BHMA 1” (W) x 1 ½” (L) A156.16 B221181

Bi-Fold Concave Knob ►► Beveled edge Diameter: 1 ⅜” CK130 US3, 5, 26D ►► Packed with 1” screw ►► Cast material

Drive In Finger Pull DIFP218 ►► Individually poly-bagged (Without Nail) US3, 5, 10B, ►► Ideal for sliding doors 1 Diameter: 2 /8” US15, 15A, ►► Conforms to ANSI / BHMA US26, 26D A156.16 B22201 and A156.14 FP98 (With Nail) DIFP218 FP98 D2781 Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

30 (800) 876-9258 | www.cal-royal.com | OCT 2017 DOUBLE-ACTING FLOOR SPRING HINGE ILLUSTRATION ITEM SIZE ITEM # FINISH

Double-Acting Residential Floor Spring Hinge Door Range ►► Double acting, spring tension US3, 5, 15, 1 ⅛” – 1 ¾” ►► Steel trim DAFH8 US10B, ►► Heavy Duty ball bearing type with 90° Door Prep: US26D Hold Open 8 ⅛”(L) x 1 ½”(H) ►► Can hold doors up to 90 lbs. ►► Door Range 1 ⅛” – 1 ¾” CRASH CHAINS AND BOLTS Single Spring Crash Chain Door Guard ►► Protects doors, hinges and glass from wind damage Chain: 21 ¾” 13 CCD30 Zinc ►► Made with heavy gauge zinc brackets Spring Dia: /16” 13 and steel chain /16” diameter spring ►► Individually poly-bagged with mounting screws Single Spring Crash Chain Door Guard (with VINYL) ►► Protects doors, hinges and glass from wind damage Chain: 21 ¾” ►► Made with heavy gauge zinc brackets 13 CDV24 Zinc 13 Spring Dia: /16” and steel chain /16” diameter spring ►► Individually poly-bagged with mounting screws ►► Weather and rip resistant vinyl cover Super Heavy Duty Adjustable Chain Door Stop with Vinyl Cover ►► Heavy Duty compression spring on both ends of chain and end brackets Adjustable ►► Thick gauge steel brackets 20” to 30 ½” HDCDV-48 US26D ►► Welded solid steel chains 13 ►► Conforms to ANSI / BHMA A156.16 Spring Dia: /16” L12231 (Grade 1) ►► Weather and rip resistant vinyl cover ►► Comparable to IVES #115

24” Chain Bolt Hardened Steel ►► Supplement to a regular door lock for added security on cabinet, double screen, garage and industrial doors ►► Zinc plated Zinc ►► Can be used on doors opening in by Full 24’’ Chain CB6 reversing the square bolt Chromium ►► Equipped with a strong hard-drawn wire spring which throws the bolt automatically when chain is released ►► Individually poly-bagged with strike and screws Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

31 (800) 876-9258 | www.cal-royal.com | OCT 2017 SURFACE OVERHEAD DOOR HOLDER AND STOPS

Cal-Royal CR550 Series holders and stops are designed to give dependable surface-mounted overhead door control for medium to light duty applications. They come in a wide assortment of architectural finishes. The CR550 series holders and stops can be installed in almost all types of doors and frames including doors with conventional butt hinges, offset pivots, continuous hinges, swing clear hinges and other specialty hinges. They can be mounted to accommodate 85° - 110° door opening. Each door holder and stop models come in four different sizes.

CR550 SERIES • Limits door swing • Non-Handed / Reversible • Built-in cushioned stop • Available stop only or stop / hold • Automatic hold-open and release by push and pull on door • Hold-open can be disengaged to act as stop only • Heavy shock absorber spring provides compression before dead stop • Screw packet included to allow for installation in wood or metal door and frame • Maximum opening 110°, minimum door thickness 1 ⅜” • Available in architectural finishes • ANSI A.156.8 UL Listed as STOP Function

ITEM NUMBER SIZE DOOR OPENING FUNCTION Cal-Royal CR550 series holders and stops are designed for medium to light-duty applications. Generally used for openings CR552S 2 23 1/16” - 27” that are subject to normal traffic activity, thus extending the life CR553S 3 27 1/16” - 33” of doors, frames, hinges and walls or obstructions. STOP ONLY Material: CR554S 4 33 1/16” - 39” Channel is made of steel or stainless steel ¾” deep, ¾” wide CR555S 5 39 1/16” - 45” and 0.050” thick; arm is made of steel or stainless steel 3 ¾” wide, /16” thick; standard jamb bracket is made of steel or CR552H 2 23 1/16” - 27” 3 stainless steel ¾” wide, 2 ⅞” long, /16” thick. CR553H 3 27 1/16” - 33” Finish: HOLD OPEN CR554H 4 33 1/16” - 39” Available in architectural finishes. UL Listed for STOP only function. CR555H 5 39 1/16” - 45”

OVERHEAD STOPS AND HOLDERS CROSS-REFERENCE CHART CAL-ROYAL GLYNN JOHNSON ABH ROCKWOOD RIXSON DORMA STOP ONLY CR552S 452S 4421 14421 10-236 701S CR553S 453S 4422 14422 10-336 702S CR554S 454S 4423 14423 10-436 703S CR555S 455S 4424 14424 10-536 HOLDER CR552H 452H 4411 14411 10-226 701H CR553H 453H 4412 14412 10-326 702H CR554H 454H 4413 14413 10-426 703H CR555H 455H 4414 14414 10-526

32 (800) 876-9258 | www.cal-royal.com | OCT 2017 HANDICAP RESTROOM SIGNS (ADA) WITH BRAILLE ►► Includes Tactile Characters & Grade 2 Braille ►► Individually Poly-bagged ►► Meets Size and Placement Specifications ►► Packed 10pcs. per Inner Box, ►► Double Faced Tape for Easy Installation 100 pcs. per Master Carton ITEM SIZE ITEM # FINISH Men, with Braille, pictogram, text 6” x 9” M68 Men Handicap, with Braille, pictogram, text 6” x 9” MH68 Boys Handicap, with Braille, pictogram, text 6” x 9” BOYH68 Women, with Braille, pictogram, text 6” x 9” W68 Women Handicap, with Braille, pictogram, text 6” x 9” WH68 Girls Handicap, with Braille, pictogram, text 6” x 9” GIRH68 Unisex Restroom, with Braille, pictogram, text 6” x 9” RS68 Blue or Black Unisex Handicap Restroom, with Braille, pictogram, text 6” x 9” RSH68 No Smoking, with Braille, pictogram, text 6” x 9” NS68 Exit, with Braille, pictogram, text 6” x 9” CAEXT69 Exit Route, with Braille, text 6” x 6” CAEXRT4534

3 Men, with Braille, text 1 /4” x 6” M1346

3 Women, with Braille, text 1 /4” x 6” W1346

3 Restroom, with Braille, text 1 /4” x 6” RS1346 Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

GIRH68 M68 W68 RS68 NS68

BOYH68 MH68 WH68 RSH68 CAEXT69

M1346 W1346 RS1346

CAEXRT4534 33 (800) 876-9258 | www.cal-royal.com | OCT 2017 HANDICAP RESTROOM SIGNS (ADA) WITH BRAILLE ►► Complies to Exterior and Interior Handicap Accessible Restrooms and ►► Raised Letters and Symbols International Symbol of Signs ►► Brailled for the Blind ►► Packed 10 pcs. per Inner Box, 100 pcs. per Master Carton (may vary ►► Double Faced Tape for Easy Installation depending on customers request ►► Individually Poly-bagged ITEM SIZE ITEM # FINISH Women Sign, Raised and Braille 12” Circle WHS5 Girls Sign, Raised and Braille 12” Circle GHS4 Blue Only Men Sign, Raised and Braille 10 ½” High Triangle MHS6 Boys Sign, Raised and Braille 10 ½” High Triangle BHS1 Women Sign, Raised and Braille, and Handicap Logo 12” Circle WHS5A Men Sign, Raised and Braille, and Handicap Logo 10 ½” High Triangle MHS6A Unisex, Raised and Braille 12” Circle UHS7 Blue or Black Unisex, Raised and Braille, and Handicap Logo 12” Circle UCHS10 Unisex, Raised and Braille 12” Circle NEWUCHS7 Unisex, Raised and Braille, and Handicap Logo 12” Circle NEWUCHS10 DECALS AND STICKERS Blue Square Plastic Sign and Handicap Logo 8” x 8” CHS9 Blue Blue Insignia Handicap Logo 4” x 4” HI11 White on Blue This door to remain unlocked during business hours 1 ½” x 24” WDC13 White on Black This door to remain unlocked during business hours 1 ½” x 24” BDC12 Black on Clear These doors to remain unlocked during business hours 1 ½” x 24” TDUW8 White on Black These doors to remain unlocked during business hours 1 ½” x 24” TDUB1 Black on Clear This door to remain unlocked when building is occupied 1 ½” x 27 ½” BDO-5 Black on Clear This door to remain unlocked when building is occupied 1 ½” x 27 ½” WDO-11 White on Black These doors to remain unlocked when building is occupied 1 ½” x 27 ½” TWOC-14 White on Black These doors to remain unlocked when building is occupied 1 ½” x 27 ½” TBOC-19 Black on Clear Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

CHS9 MHS6 WHS5 BHS1 UHS7 NEWUCHS7

HI11 MHS6A WHS5A GHS4 UCHS10 NEWUCHS10

WDC13 WDO-11

BDC12 BDO-5 THESE DOORS TO REMAIN UNLOCKED WHEN BUILDING IS OCCUPIED TDUW8 TWOC-14

TDUB1 TBOC-19

34 (800) 876-9258 | www.cal-royal.com | OCT 2017 CALIFORNIA-APPROVED RESTROOM SIGNS WITH BRAILLE ►► Includes Tactile Characters & Contracted Grade 2 Braille ►► Individually Poly-bagged ►► Meets Size and Placement Specifications ►► Packed 10pcs. per Inner Box, ►► Double Faced Tape for Easy Installation 100 pcs. per Master Carton ITEM SIZE ITEM # FINISH Men Handicap, with Braille, pictogram, text 6” x 9” CAMH69 Women Handicap, with Braille, pictogram, text 6” x 9” CAWH69 Blue Unisex Restroom Handicap, with Braille, pictogram, text 6” x 9” CARSH69 Handicap Accessible, with Braille, pictogram, text 6” x 9” CACCS69 Exit, with Braille, text 6” x 9” CAEXT69 Blue or Black

3 Men, with Braille, text 1 /4” x 8” CAM1348

3 Women, with Braille, text 1 /4” x 8” CAW1348 Blue

3 Restroom, with Braille, text 1 /4” x 8” CARS1348 Specification Sheets available for submittal purposes at www.cal-royal.com. Click on “Specification Sheets Image”

CAMH69 CAWH69 CARSH69 CAEXT69 CACCS69

CAM1348 CAW1348 CARS1348

35 (800) 876-9258 | www.cal-royal.com | OCT 2017 SLIDING DOOR HARDWARE ►► Adds modern look to ordinary doors and doorways ►► Easy to assemble ►► Ultra-quiet rollers and ball bearing wheels ►► Includes standard bumpers on both sides ►► Excellent solution to create beautiful living spaces ►► Optional Soft Action Stop or Soft Close System ►► 304 Grade Stainless Steel ►► Door & door handle not included SPECIFICATIONS ACCESSORIES SCSDH (Soft Close System) Max Weight for Wood and Glass Doors 200 lbs (90kg) Pair of Soft Close System at both ends. Comes as a complete set with 1 3/8” - 1 9/16” 1 9/16” - 1 3/4” door track and components. Easy Wood Door Thickness ( 35 - 40 mm ) ( 40 - 45 mm ) installation on prefabricated roller SDHRC track without the need to mortise 5 3 3 1 on door. Can also be purchased as /16” - /8” /8” - /2” (Rail Connector) Glass Door Thickness accessory only. ( 8 -10 mm ) ( 10 - 12 mm ) Finish Satin Stainless Steel (US32D) TYPE MIN DOOR WT MAX DOOR WT SCS40 44 lbs (20 kg) 88 lbs (40 kg) Sliding Rod Length 6’ 6” 8’ 2” DS-2200 DS-2300 SCS80 88 lbs (40 kg) 176 lbs (80 kg) (Soft Action Roller Stop) *STANDARD (SEE BELOW FOR ROLLER TYPE APPLICATION) Max Door Opening 36” 48” Select correct type of closer for maximum smooth closing operation. Refer to table for door weight limits. SDH SERIES - STAINLESS STEEL SLIDING DOOR HARDWARE FOR WOOD DOORS FOR WOOD AND GLASS DOORS FOR GLASS DOORS SDH10 (Track w/ Regular Stop) SDH20 (Track w/ Regular Stop) SDH13 (Track w/ Soft Stop) SDH23 (Track w/ Soft Stop) SCS8016 (Track w/ Soft Close SCS8025 (Track w/ Soft Close System with SCS80) System with SCS80) SCS4016 (Track w/ Soft Close SCS4025 (Track w/ Soft Close System with SCS40) System with SCS40) Finish: US32D FOR WOOD DOORS OPTIONAL SOFT ACTION Mounting Style: Top SDH30 (Track w/ Regular Stop) ROLLER STOP SDH33 (Track w/ Soft Stop) ITEM # DS-2200 Design: Single Wheel SCS8035 (Track w/ Soft Close System with SCS80) SCS4035 (Track w/ Soft Close SDH11 (Track w/ Regular Stop) System with SCS40) SDH14 (Track w/ Soft Stop) OPTIONAL SOFT ACTION ROLLER STOP Finish: US32D SCS8017 (Track w/ Soft Close ITEM # DS-2200 FOR GLASS Mounting Style: Surface System with SCS80) ITEM # DS-2300 FOR WOOD Design: Strap Single Wheel SCS4017 (Track w/ Soft Close System with SCS40) FOR GLASS DOORS Finish: US32D OPTIONAL SOFT ACTION SDH21 (Track w/ Regular Stop) ROLLER STOP Mounting Style: Top SDH24 (Track w/ Soft Stop) ITEM # DS-2200 Design: Spoke Wheel SCS8026 (Track w/ Soft Close System with SCS80) SCS4026 (Track w/ Soft Close System with SCS40) SDH12 (Track w/ Regular Stop) FOR WOOD DOORS SDH15 (Track w/ Soft Stop) SDH31 (Track w/ Regular Stop) SCS8018 (Track w/ Soft Close SDH34 (Track w/ Soft Stop) System with SCS80) SCS8036 (Track w/ Soft Close SCS4018 (Track w/ Soft Close System) System with SCS40) SCS4036 (Track w/ Soft Close Finish: US32D System with SCS40) OPTIONAL SOFT ACTION Mounting Style: Top OPTIONAL SOFT ACTION ROLLER STOP Finish: US32D ROLLER STOP ITEM # DS-2200 FOR GLASS Mounting Style: Surface ITEM # DS-2300 Design: Dual Wheel ITEM # DS-2300 FOR WOOD Design: Strap Dual Wheel

36 (800) 876-9258 | www.cal-royal.com | OCT 2017 SLIDING DOOR HARDWARE

►► Blends seamlessly with modern, rustic, classic, or contemporary interior ►► Includes standard bumpers on both sides designs. ►► Has a durable Powder Coated Matte Black finish ►► With optional Soft Close System ►► Includes all mounting accessories for easy ►► Provides a unique and clean look to any interior doorway or room divider assembly ►► Contains ultra-quiet rollers for smoother operation ►► DOOR NOT INCLUDED.

SPECIFICATIONS ACCESSORIES Max Weight for Wood Door 265 lbs (120kg) 1 3/8” - 1 9/16” 1 3/4” - 2” SCSBDH (Soft Close System) Wood Door Thickness BDHCP (Track Connector) ( 35 - 40 mm ) ( 45 - 50 mm ) Pair of Soft Close System at both ends. Securely connects 2 door tracks 5 3 3 1 Comes as a complete set with door track /16” - /8” /8” - /2” with easy installation. Glass Door Thickness ( 8 -10 mm ) ( 10 - 12 mm ) and components. Easy installation on roller track without the need to mortise Finish Powder Coated Matte Black on door. Sliding Rod Length 6’ 6” 8’ 0” Max Door Opening 39” 47” Included In Set 1 Sliding Rod, 2 Rollers, 2 Stoppers, 1 Floor Guide, and Complete Mounting Screws. Optional Soft Closer System. BDH SERIES - BLACK BARN DOOR HARDWARE

Item: BDH3166 (6 ft.) Item: BDH3366 (6 ft.) BDH3180 (8 ft.) BDH3380 (8 ft.) Tracks with Soft Close System: Tracks with Soft Close System: SCSBDH3166 (6 ft.) SCSBDH3366 (6 ft.) SCSBDH3180 (8 ft.) SCSBDH3380 (8 ft.) Mounting Style: Top Mounting Style: Surface Design: Single Wheel Design: Diamond

Item: BDH3066 (6 ft.) Item: BDH3466 (6 ft.) BDH3080 (8 ft.) BDH3480 (8 ft.) Tracks with Soft Close System: Tracks with Soft Close System: SCSBDH3066 (6 ft.) SCSBDH3466 (6 ft.) SCSBDH3080 (8 ft.) SCSBDH3480 (8 ft.) Mounting Style: Surface Mounting Style: Surface Design: Strap Wheel Design: Horseshoe

Item: BDH3266 (6 ft.) Item: BDPUL6000 BDH3280 (8 ft.) Flat Type Door Handle Tracks with Soft Close System: SCSBDH3266 (6 ft.) SCSBDH3280 (8 ft.) Mounting Style: Surface Design: Arrowhead

37 (800) 876-9258 | www.cal-royal.com | OCT 2017