Windows 10 Configuration Requirements 1.) Disk Space Requirement A) Minimum 80GB Disk Space

Total Page:16

File Type:pdf, Size:1020Kb

Windows 10 Configuration Requirements 1.) Disk Space Requirement A) Minimum 80GB Disk Space Windows 10 Configuration Requirements 1.) Disk Space Requirement a) Minimum 80GB disk space 2.) Turn on Windows Features for Web Services * Assume Windows 10 has already installed properly a) Right click on “Windows Start icon” on desktop at bottom left hand corner, b) Select “Control Panel” c) Select “Program and Features” in dialogue box, d) Select “Turn Windows Features on or off” on left panel in the dialogue box, e) Turn on Windows Features by selecting its check box (See Figure 1.) f) Click “OK” button when done. Figure 1. Turn on Windows 10 Features Windows 10 Configuration Requirements 3.) Web Services Configuration ASP.Net State Service Require Start Automatically a) Login with administrator privilege, Windows 10 Configuration Requirements b) Right click on “Windows Start icon” on desktop at bottom left hand corner, c) Select “Control Panel” in dialogue box, d) Left double click “Administrative Tools”, e) Left double click “Services”, f) Right click on ASP.net State Service; and left single click on “Properties”, g) Change “Manual” to “Automatic” on Startup type by using drop down arrow, h) Click “Start” to start the service; then click “OK”,, 4.) Directories Require Full Permission in Drive C: a) Open Windows Explorer in the bottom taskbar b) Expand “This PC”, then left double click on “Local Disk (C:)” on the right hand side panel c) Right single click on Inetpub folder on Drive C, d) Left single click on “Properties”, e) Left click on “Security” tab on Inetpub Properties, f) Left click on “Edit” button; then click “Add” button g) Type “Network Service” in “Enter the object names to select”, and click “Check Names” h) Then click “OK” button, i) Put a “Check Mark” on Full Control under “Allow”, j) Click “Apply” button. If “Error Applying Security” message pops up, keep click “Continue” k) Click “OK” button to exit “Permissions for “Inetpub” 5.) Create Backup Directory a) Open Windows Explorer in the bottom taskbar b) Expand “This PC”, then left double click on “Local Disk (C:)” on the right hand side panel c) Right single clicks on white space, and select “New Folder” in dialogue box d) Name the New Folder to “Backup” e) Left single click on “Backup and select “Properties”, f) Left click on “Security” tab on “Backup” Properties, g) Left click on “Edit” button; then click “Add” button h) Type “Everyone” in “Enter the object names to select”, and click “Check Names” i) Then click “OK” button, j) Put a “Check Mark” on Full Control under “Allow”, k) Click “OK” button to exit “Permissions for “Backup” 6.) Install Microsoft SQL Server Express *If Windows 10 is using 32 bit, please install 32-bit software; otherwise install 64-bit accordingly. Microsoft SQL Server 2014 Express with Advance Features a) Download Microsoft SQL Server 2014 Express with Advance Features (SQLEXPRADV_x64_ENU.exe or SQLEXPRADV_x86_ENU.exe) at this URL, https://www.microsoft.com/en- ca/download/details.aspx?id=42299 SQL Server 2014 Express Installation Make sure Currency Format is English (United States) in Regional & Language, it can be changed other format after SQL Server Installed, check SQL Collation Settings under Collation tab for SQL_Latin1_General_CP1_CI_AS a) Click on “Installation” on left panel in SQL Server Installation Center box, and click on “New SQL Server Stand-alone Installation” b) On the End User License Agreement, check the box I accepts the licensing terms and conditions and then click Next; Windows 10 Configuration Requirements c) On the Feature Selection screen, put a check mark in selection as picture shown, then click Next to proceed; d) Select SQLExpress in Name Instance on the Instance Configuration screen and click Next; e) On Server Configuration screen, use NT Authority\LOCAL SERVICE for startup SQL server f) On Database Engine Configuration screen, select the Mixed Mode (Windows Authentication and SQL Server Authentication) and fill out the password for sa. Click Add Current User button under Specify SQL Server Administrator. Click Next to proceed; Windows 10 Configuration Requirements g) Leave Install and configure on Reporting Service Native Mode screen, click Next to proceed; h) Click Close on the Complete screen 7.) Install Required Software *If Windows 10 is using 32 bit, please install 32-bit software; otherwise install 64-bit accordingly. Microsoft Visual Studio 2012 Express for WEB a) Download Microsoft Visual Studio 2012 Express (vns_full.exe) at this URL, https://www.microsoft.com/en-ca/download/details.aspx?id=30669 b) Visual studio 2012 express do not include Report Designer, download Report Designer (ReportBuilder3.msi) at this URL, http://www.microsoft.com/en-us/download/details.aspx?id=35576 Windows 10 Configuration Requirements Crystal Report a) Download SAP Crystal Report 13 (32 or 64 bit) (CRforVS_13_0_17.exe) at this URL, http://scn.sap.com/docs/DOC-7824 (For Development System Only) b) Download SAP Crystal Report 13 (32 or 64 bit) runtime (CRforVS_redist_install_32bit_13_0_17.zip or CRforVS_redist_install_64bit_13_0_17.zip) at this URL, http://scn.sap.com/docs/DOC-7824 (For Production System Only) c) Follow the default instruction to finish the installation. Microsoft Report Viewer 2012 Runtime a) Download Report Viewer 2012 runtime at this URL, https://www.microsoft.com/en-ca/download/details.aspx?id=35747 b) CLR types for SQL Server 2014 (prerequisite – you may need to install depending on the SQL Server version, Download CLR types at this URL, http://www.microsoft.com/en-us/download/details.aspx?id=29065 c) Follow the default instruction to finish the installation. * Do Not use Report Viewer Runtime 2010, otherwise PDF report will be blank in PDF Viewer in Chrome. Microsoft Access Database Engine 2016 Redistributable a) Download Microsoft Access Database Engine 2016 Redistributable at this URL, https://www.microsoft.com/en-us/download/details.aspx?id=50040 b) Follow the default instruction to finish the installation. Adobe Acrobat Reader a) Download Adobe Acrobat Reader at this URL, https://get2.adobe.com/reader b) Follow the default instruction to finish the installation. .
Recommended publications
  • Ideablade Devforce Installation Guide
    DevForceDevForce Silverlight WinClient Installation Guide DevForce Silverlight Installation Guide Table of Contents Table of Contents Preface ................................................................................................................................ 1 Installation .......................................................................................................................... 2 Product Prerequisites ........................................................................................................................... 2 Pre-installation Checklist ...................................................................................................................... 2 Installing DevForce Silverlight .............................................................................................................. 4 Post-Installation Tasks ......................................................................................................................... 6 Updating Existing Applications....................................................................................... 7 Consult the Release Notes ................................................................................................................... 7 Upgrading DevForce Versions.............................................................................................................. 7 Upgrading DevForce Editions ............................................................................................................. 11 Troubleshooting
    [Show full text]
  • Billquick-SQL Server 2012 Express Installation Guide
    INSTALLATION GUIDE BillQuick-SQL Server 2012 Express Installation BillQuick-SQL Server 2012 Express Installation BillQuick | Power Up Your Business (866) 945-1595 | www.bqe.com | [email protected] INSTALLATION GUIDE BillQuick-SQL Server 2012 Express Installation CONTENTS SQL EXPRESS INSTALLATION 1 SYSTEM REQUIREMENTS 1 INSTALLING SQL 2012 EXPRESS 1 SQL EXPRESS CONFIGURATION 8 BILLQUICK DATABASE 11 BillQuick | Power Up Your Business (866) 945-1595 | www.bqe.com | [email protected] INSTALLATION GUIDE BillQuick-SQL Server 2012 Express Installation SQL EXPRESS INSTALLATION The Microsoft® SQL Server® 2012 Express software is the database engine you will use to store and report on data in BillQuick (Basic, Pro and Enterprise editions). It is available free from Microsoft and is a replacement for MSDE and SQL 2005. We do not recommend using SQL Server 2005 that might be installed with your Windows Server because other software programs that rely on that SQL Server instance can break if you attempt to install service pack updates on them. System Requirements You can check Microsoft Download Center to download Microsoft SQL Server 2012 R2 SP2. Click to know about the system requirements and installation instructions. Hardware/Software Requirements To know about the hardware and software requirements, go to Microsoft Developer Network . Installing SQL 2012 Express Please follow the steps below to install SQL Server 2012 Express edition. If you prefer, click here to watch a video on installing SQL Server Express. 1. Download the appropriate SQL Server 2012 Express setup to your desktop. Express Version System Microsoft® SQL Server® 2012 Express SP1 For 32-Bit machines, download the file: SQLEXPRWT_x86_ENU.exe For 64-Bit machines, download the file: SQLEXPRWT_x64_ENU.exe 2.
    [Show full text]
  • SQL Server Express: Setting up for Unistream User Guide 3/17
    Headquarters Unitronics (1989) (R"G). Unitronics Building, Airport City P.O.B. 300, Ben Gurion Airport, Israel 70100 Tel: + 972 (3) 977 8888 Fax: + 972 (3) 977 8877 SQL Server Express: Setting up for UniStream User Guide 3/17 Contents SQL Server Express: Setting up for UniStream ...................................................... 1 Overview ....................................................................................................... 1 Supported Controllers ...................................................................................... 1 First-time Installation & Configuration ................................................................. 2 Download ...................................................................................................... 2 Installing SQL Server ...................................................................................... 3 Setting up the Local Database .......................................................................... 5 Configuring SQL Server ................................................................................... 6 Activating the SQL Server Browser. ................................................................ 6 Enable TCP/IP, Assign Port ............................................................................ 7 Create a new Login ....................................................................................... 8 SQL Server Express—Existing Installation ........................................................... 10 Enable TCP/IP, Assign Port
    [Show full text]
  • Syncstudio Requirements
    Hardware and Software Requirements The SyncStudio Sync Management Console and the custom generate Sync Web Service run on Windows OS systems. We support Windows 7, 8.1, 10 and Windows Server 2012 or 2016. Win XP is not supported. For production environments, we recommend Windows Server. We support both virtual and physical machines. The machine needs to have IIS 7 or above installed, enabled and with the features/roles as per our quick start guide. .NET Framework 3.5 is the minimum but 4.6 or higher is recommended. The server database can be either MS SQL SERVER or MS SQL EXPRESS versions 2008, 2010, 2012, 2014, 2016. Version 2014 and above is recommended. If you don’t have MS SQL Server, you can download SQL Server Express from this link: MS SQL Server 2016 Express Edition In SQL add login NT AUTHORITY\NETWORK SERVICE and make it a db owner of the selected SQL database. Visual Studio – SyncStudio depends on portions of Visual Studio to perform automated code generation. If you’ve installed a full license of Visual Studio 2010 or above, then you are good to go. If you do not own a full license, then you can use the Free Visual Studio Express or Visual Studio Integration Shell 2010. Minimum Microsoft Visual Studio 2010 or 2012 SyncStudio does not require that you own a full license of Visual Studio. You do however need to have installed one of the following… - Microsoft Visual Studio Integration Shell 2010 - Microsoft Visual Studio Express for Web 2010 or 2012 - Microsoft Visual Studio 2010 or 2012 full license Windows Firewall - Turn off firewall or configure pass thru as needed.
    [Show full text]
  • Xactimate 28 Network Installation Guide
    Network Installation Guide © 2011-2013 by Xactware . All rights reserved. Xactware, Xactimate, Xactimate Online, XactNet, and/or other Xactware products referenced herein are either trademarks or registered trademarks of Xactware Solutions, Inc. Other product and company names mentioned herein may be the trademarks of their respective owners. (031213) www.xactware.com Xactimate version 28 Network Installation Guide INTRODUCTION Like all networked software applications, Xactimate must be installed on a workstation connected to a network that has been properly set up and mapped to a shared drive (this document uses the X drive as an example). Xactware recommends that a certified network technician set up and administer the network. It is recommended for a network installation of Xactimate to use the physical disc. For instructions about how to set up a network installation of Xactimate via the downloadable version, visit the eService Center at https:/ / eservice.xactware.com/apps/esc/ Xactimate v28.0 Network Installation Guide Page 1 Introduction SYSTEM REQUIREMENTS - XACTIMATE V28.0 NETWORK INSTALLATION Specifications Minimum Requirements Recommended Requirements Processor Single Core Processor 1.5GHz Dual Core Processors Operating System Windows 8 (32 bit, 64 bit) Windows 7 (32 bit, 64 bit) Windows Vista (32 bit, 64 bit Business, 64 bit Ultimate) Windows XP Service Pack 3 *Windows RT is not Supported Video Card Open GL 2.0 Compatible with 128 Open GL 2.0 Compatible with MB of VRAM and Latest Drivers 512 MB of VRAM and Latest Drivers
    [Show full text]
  • Avaya Contact Center Express Release 5.0 Installation Guide
    Avaya Contact Center Express Release 5.0 Installation Guide Release 5.0 August 2010 © 2005 to 2010 Avaya Inc. All Rights Reserved. Trademarks Avaya and the Avaya logo are either registered trademarks or trademarks of Notice Avaya Inc. in the United States of America and/or other jurisdictions. While reasonable efforts were made to ensure that the information in this All other trademarks are the property of their respective owners. document was complete and accurate at the time of printing, Avaya Inc. can assume no liability for any errors. Changes and corrections to the information Downloading documents in this document might be incorporated in future releases. For the most current versions of documentation, see the Avaya Support Web Documentation disclaimer site: Avaya Inc. is not responsible for any modifications, additions, or deletions to http://www.avaya.com/support the original published version of this documentation unless such modifications, Avaya support additions, or deletions were performed by Avaya. Customer and/or End User agree to indemnify and hold harmless Avaya, Avaya's agents, servants and Avaya provides a telephone number for you to use to report problems or to ask employees against all claims, lawsuits, demands and judgments arising out of, questions about your product. The support telephone number or in connection with, subsequent modifications, additions or deletions to this is 1-800-242-2121 in the United States. For additional support telephone documentation to the extent made by the Customer or End User. numbers, see the Avaya Support Web site: http://www.avaya.com/support Link disclaimer Avaya Inc. is not responsible for the contents or reliability of any linked Web sites referenced elsewhere within this documentation, and Avaya does not necessarily endorse the products, services, or information described or offered within them.
    [Show full text]
  • Installing SQL Server Express Editions
    Installing SQL Server Express Editions For v9.0 (and above) of Halcyon Network Server Suite, Advanced Reporting Suite, Performance Analyzer GUI and Disk Explorer GUI About this Guide This document provides basic installation and configuration instructions for Microsoft SQL Server Express Editions for v9.0 (and above) installations of Halcyon Network Server Suite, Advanced Reporting Suite, Performance Analyzer and Disk Explorer GUI. Copyright Copyright 2013 - 2016 Halcyon - A Division of HelpSystems. All rights reserved. • SQL Server is a registered trademark of Microsoft Corporation in the uNited States and other countries. • Windows is a registered trademark of Microsoft Corporation in the United States and other countries. This document is intended as a guide to using Halcyon software. This documentation contains Halcyon proprietary and confidential information and may not be disclosed, used, or copied without the prior consent of Halcyon Software, or as set forth in the applicable license agreement. Users are solely responsible for the proper use of the software and the application of the results obtained. Although Halcyon Software has tested the software and reviewed the documentation, the sole warranty for the software may be found in the applicable license agreement between Halcyon Software and the user. Publication Revision: August 2016 C HAPTER CHAPTER 1SYSTEM REQUIREMENTS The following system requirements must be in place in order for the installation of Microsoft SQL Server Express Editions to be successful. 64-bit configuration is required for any 64-bit versions of Windows. V9.0 of Network Server Suite, Performance Analyzer GUI and Disk Explorer GUI can also run on 32-bit versions of Windows.
    [Show full text]
  • Programming with Windows Forms
    A P P E N D I X A ■ ■ ■ Programming with Windows Forms Since the release of the .NET platform (circa 2001), the base class libraries have included a particular API named Windows Forms, represented primarily by the System.Windows.Forms.dll assembly. The Windows Forms toolkit provides the types necessary to build desktop graphical user interfaces (GUIs), create custom controls, manage resources (e.g., string tables and icons), and perform other desktop- centric programming tasks. In addition, a separate API named GDI+ (represented by the System.Drawing.dll assembly) provides additional types that allow programmers to generate 2D graphics, interact with networked printers, and manipulate image data. The Windows Forms (and GDI+) APIs remain alive and well within the .NET 4.0 platform, and they will exist within the base class library for quite some time (arguably forever). However, Microsoft has shipped a brand new GUI toolkit called Windows Presentation Foundation (WPF) since the release of .NET 3.0. As you saw in Chapters 27-31, WPF provides a massive amount of horsepower that you can use to build bleeding-edge user interfaces, and it has become the preferred desktop API for today’s .NET graphical user interfaces. The point of this appendix, however, is to provide a tour of the traditional Windows Forms API. One reason it is helpful to understand the original programming model: you can find many existing Windows Forms applications out there that will need to be maintained for some time to come. Also, many desktop GUIs simply might not require the horsepower offered by WPF.
    [Show full text]
  • Microsoft ADO.NET Entity Framework Step by Step
    Microsoft ADO.NET Entity Framework Step by Step John Paul Mueller Copyright © 2013 by John Mueller All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the written permission of the publisher. ISBN: 978-0-735-66416-6 1 2 3 4 5 6 7 8 9 LSI 8 7 6 5 4 3 Printed and bound in the United States of America. Microsoft Press books are available through booksellers and distributors worldwide. If you need support related to this book, email Microsoft Press Book Support at [email protected]. Please tell us what you think of this book at http://www.microsoft.com/learning/booksurvey. Microsoft and the trademarks listed at http://www.microsoft.com/about/legal/en/us/IntellectualProperty/ Trademarks/EN-US.aspx are trademarks of the Microsoft group of companies. All other marks are property of their respective owners. The example companies, organizations, products, domain names, email addresses, logos, people, places, and events depicted herein are fictitious. No association with any real company, organization, product, domain name, email address, logo, person, place, or event is intended or should be inferred. This book expresses the author’s views and opinions. The information contained in this book is provided without any express, statutory, or implied warranties. Neither the authors, Microsoft Corporation, nor its resellers, or distributors will be held liable for any damages caused or alleged to be caused either directly or indirectly by this book. Acquisitions and Developmental Editor: Russell Jones Production Editor: Christopher Hearse Editorial Production: Zyg Group, LLC Technical Reviewer: Russ Mullen Indexer: Zyg Group, LLC Cover Design: Twist Creative • Seattle Cover Composition: Ellie Volckhausen Illustrator: Rebecca Demarest This book is dedicated to Kevin Smith, a good friend who’s helped us realize some of our most special dreams.
    [Show full text]
  • ASP.NET Core Connection String
    https://www.halvorsen.blog ASP.NET Core Connection String Hans-Petter Halvorsen Introduction • The Connection string is used to connect to the database • In this tutorial we will use SQL Server, Visual Studio, C# • We will show how we use Connection String in an ASP.NET Core Web Application 2 https://www.halvorsen.blog SQL Server Hans-Petter Halvorsen SQL Server • SQL Server is a Database System from Microsoft. SQL Server comes in different editions, for basic, personal use • SQL Server Express is recommended because it is simple to use, and it is free. • Latest version is SQL Server 2019. 4 SQL Server Installation • During the setup of SQL Server you should select "Mixed Mode" (i.e., both "SQL Server Authentication" and "Windows Authentication") and enter the password for your sa user. • "Windows Authentication" is the default option during installation, so make sure to "Mixed Mode" (i.e., both "SQL Server Authentication" and "Windows Authentication") and enter the password for your sa user • Make sure to remember the sa password! 5 SQL Server Installation - Mixed Mode • During Installation of SQL Server: Select “Mixed Mode” (i.e., both SQL Server Authentication and Windows Authentication) • Make sure to remember the “sa” Password! • “sa” is short for System Administrator 6 SQL Server Installation - Mixed Mode 7 https://www.halvorsen.blog Authentication Hans-Petter Halvorsen Visual Studio • In WinForm Desktop Applications you should put the Connection String in the App.config file • While for ASP.NET Core Web Applications the Connection
    [Show full text]
  • Asp.Net Drop Local Db Schema
    Asp.net Drop Local Db Schema Asteroidal Tad distains no orexis charks vexatiously after Anselm forgot perceptively, quite modiolar. Personative Maxfield oralways kithes reimposed liturgically. his tear if Avrom is isochronal or predestining riskily. Unexceptional Yancey usually niff some repetitions An asp net core series explains how you have the db file empty script it up! Even all tables. Seed generation is finally that you populate the database with catering the time gap is created. Includes standard management tools. SqlAzureV12DatabaseSchemaProvider does god support schema file. Introduction to IndexedDB The link-browser Database. Select project to database settings In set Project details section on the Basics tab configure the following Subscription click drag drop-down. INSERT, DELETE, or sleep and returns a clamour of affected records. In this post, type will build an ASP. Dapper was built with performance and eat of minor in mind. This local db in asp net sdk from the drop: performs basic data item details about production server and better ways to create from scratch given. Click on receive button would start or host the API under prominent local IIS Express. 2 json How many create User registration Form in c asp. Now please have the connection in tenant database. Next you giggle to wanted the MigrationHistory database service where this Framework. First asp net core tools. This schema and drop database locally using. Depending on rails migrations will mean the. We are local db for asp net core know if you are using merge to drop: get up method gets called author. Enabling the db admin user name of students in just drops all the standalone versions without any proprietary database.
    [Show full text]
  • Deploying an ASP.NET Web Application to a Hosting Provider Using Visual Studio Tom Dykstra
    Deploying an ASP.NET Web Application to a Hosting Provider using Visual Studio Tom Dykstra Summary: This series of tutorials shows you how to make an ASP.NET web application available over the internet by deploying it to a third-party hosting provider. The deployment method used is Visual Studio one-click publish. The tutorials illustrate deployment first to IIS on the development computer for testing. They then show you how to deploy to the hosting provider as the production environment. Category: Step-By-Step Applies to: ASP.NET 4.0 and earlier, Visual Studio 2010 Source: ASP.NET site (link to source content) E-book publication date: May 2012 162 pages Copyright © 2012 by Microsoft Corporation All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the written permission of the publisher. Microsoft and the trademarks listed at http://www.microsoft.com/about/legal/en/us/IntellectualProperty/Trademarks/EN-US.aspx are trademarks of the Microsoft group of companies. All other marks are property of their respective owners. The example companies, organizations, products, domain names, email addresses, logos, people, places, and events depicted herein are fictitious. No association with any real company, organization, product, domain name, email address, logo, person, place, or event is intended or should be inferred. This book expresses the author’s views and opinions. The information contained in this book is provided without any express, statutory, or implied warranties. Neither the authors, Microsoft Corporation, nor its resellers, or distributors will be held liable for any damages caused or alleged to be caused either directly or indirectly by this book.
    [Show full text]