PATCH PANEL Product Specification ANTENNA (7.5dBi) Frequency Range : 824-894 MHz Connector : TNC Female Type No.: PAL -08-0859 VSWR : Better than 1.5:1 Connector: TNC female (50 Ohm) Gain (Minimum) : 7.5 dBi Frequency range:824-894 MHz Impedance : 50 ohm This Patch Antenna is designed for Polarization : Vertical frequency range of 824-894 MHz Front to Back Ratio : Better than 15 dB in conjunction with fixed WLL, Horizontal Beam Width : 78 Degree would provide good Gain, low VSWR Vertical Beam Width : 60 Degree and better performance. Size (mm) : 210x210x62 Wt. with Mounting : 0.95 Kg
PATCH PANEL ANTENNA 12dBi PATCH PANEL ANTENNA 12dBi
Type No.: PAL -12-0859 Type No.: PAL -12-1890 Connector : N female (50 Ohm) Connector : N female (50 Ohm) Frequency Range : 824-894 MHz Frequency Range : 1880-1900 MHz Patch Antenna is designed for frequency range of Patch Antenna is designed for frequency range 824-894 MHz in conjunction with fixed WLL, would of 1880-1900 MHz in conjunction with Cor-Dect provide good Gain, low VSWR and better performance. application gives better performance.
Product Specification Product Specification Frequency Range : 824-894 MHz Frequency Range : 1880-1900 MHz Connector : N Female Connector : N Female VSWR : Better than 1.5:1 VSWR : Better than 1.4:1 Gain (Minimum) : 12 dBi Gain : 12 dBi Impedance : 50 ohm Impedance : 50 ohm Polarization : Vertical Polarization : Vertical Front to Back Ratio : 18 dB Front to Back Ratio : 18 dB Horizontal Beam Width : 70 Degree Horizontal Beam Width : 67 Degree Vertical Beam Width : 30 Degree Vertical Beam Width : 20 Degree Size (mm) : 244x524x70 Size (mm) : 125x370x40 Wt. with Mounting : 3 Kg Wt. with Mounting : 1.5 Kg
GPS/GSM DUAL POLARIZED ANTENNAS
Type No. : PAL-27/2-1575/900-1 Type No. : PAL-27/2-1575/900 Mounting : Magnetic Type Mounting : Mechanical Type
PRODUCT SPECIFICATION For GPS For GSM Frequency : 1575 +/-3 MHz Frequency : 880 ~960 MHz / 1800/1900 MHz AFC/SFC Coaxial Cables 50ohms, High Foam Dielectric, Solid Corrugated EMP Protectors Outer Conductor Connectors for (Arresters) Corrugated For Base station Coaxial Cables feeder line
DESCRIPTION
INTRODUCTION
AFC & SFC cable will be ideal for application of Cellular, PCS, Interface type : IMT-2000, Broadcast, Military telecom 7/16 DIN & N type male and radar system, or any other Amphenol offers connectors for & female RF-Coaxial cable requirements. corrugated coaxial cable meet The cables utilize a high foamed the requirements of multicarrier, Frequency range : polythylene dielectric and corrugated high-channel-count transceivers Cellular (800~900MHz) outer conductors made of as base stations of today's mobile GSM (890~960MHz) longitudinally welded and communication infrastructure PCS (1700~1900MHz) corrugated. networks. etc (1400~1600MHz) The dielectric and inner conductor They offer the many technical are bonded to each other by advantages as below. pre-coat process and the foamed Low and Stable PIMD dielectric is manufactured by a Excellent Return Loss Performance process of gas injection giving a Quick and Easy Installation foam with a fine, uniform, Environment Resistance closed cell structure.
Each cable drum delivered by Amphenol is performed 100% sweeping test to ensure the lowest specified return loss value.
Radiating Coaxial Cables
For underground Applications
RDAF Series RDCL Series
Radiating cable is very similar in construction to a This cable has a thinner, non-corrugated copper coaxial cable except for the slots in the outer conductor outer conductor with pre-punched holes which is which allow controlled levels of RF energy to be longitudinally formed around the foam dielectric radiated out-of or into the cable. Therefore, covering the inner conductor. the radiating cable functions as a great extension antenna to solve RF coverage problems RDCL series offers similar RF performance with in limited area such as tunnels, building and other RDAF series at a lower cost, which are used in underground areas. application where the ruggedness of the cable is not required. AFC/SFC Jumper Assemblies and Accessories
High performance Coaxial Cable Assemblies Accessories Amphenol offers wide Amphenol's factory assembled Jumpers are available for range of accessories different type of Standard Corrugated and Superflex cables. required installation of Lengths can be offered as per the requirement. Antenna Line products. Connectors offered: N and DIN (7/16) Types Cable Grounding Kits Connector Grounding Kits The cable assemblies provide outstanding electrical Wall Entry System performance along with high durability for tight routing Cable Clamps and superior environmental sealing for long life reliability.
RF Connectors
SMB, SMC Type SMA Type N Type
Amphenol is the world”s largest Manufacturer of RF Connectors. Our complete range of RF interconnect products are used in the cellular/ PCS, tele-communications, computer networking and instrumentation industries. These include Standard / Miniature connectors (UHF, Mini -UHF, N, 50 & 75 ohm BNC, and RP- BNC Type BNC, Twinaxial, DIN 1.6/5.6, TNC and RP-TNC ); Subminiature connectors (SMA & RP - SMA, SMB, SMC, DIN 1.0/2.3, and size 8 contacts); MicroMateTM Microminiature connectors; DIN 7- 16 & corrugated cable connectors. Amphenol offers a full line of semiflex and drop cable connectors to meet the demanding requirements of HFC broadband infrastructure being developed by CATV MSOs and telephone companies worldwide. TNC Type