(513) 697-9537 Hoffman Auto Racing Sale List (513) 697-9537 11/22/2011 LIST PRICE SALE PRICE MPD Aluminum U-Joint assembly $ 250.00 $ 75.00 U-Joint #6875 New style Thicker Yoke 27 races since new U-Joint #6998 New style thicker Yoke 17 races since new MPD Torque Ball (Out Side Ball) $ 150.00 $ 75.00 MPD Left front Aluminum rotor $ 60.00 $ 30.00 MPD Torque ball housing machined down to line up pivot points $ 200.00 $ 65.00 MPD arms Left combo and right (set) 3 1/4" bolt center $ 95.00 $ 50.00 Maxim 52" and 53" $ 190.00 $ 125.00 Aero-Dynamics steering arms left combo & RH (set) 3 3/4" B/C $ 100.00 $ 25.00 Wilwood LF/RR caliper $ 90.00 $ 55.00 Wilwood Inboard caliper Dynalite W/ Radial mount for .810 rotor $ 250.00 $ 120.00 Wilwood Billet 3 1/2" bolt spacing inboard caliper set up for 1.250" rotor $ 187.00 $ 90.00 Wilwood Billet pavement front caliper 5 1/4" bolt spacing set up for 1.250" rotor $ 187.00 $ 90.00 Wilwood brake hats 2" offset 6x5"bc for studs 8x7.625" for rotor $ 100.00 $ 45.00 Wilwood 1.25" HD front brake rotors curved vane pair (PN160-3872) $ 180.00 $ 90.00 Weld Direct Mount Hubs Ultra light w/ bearings pair $ 430.00 $ 230.00 Zemco Headers 2" primaries with turbo clamps welded on -12 Chevy $ 400.00 $ 100.00 Winters 4.12:1 w/ 52:1 long spline internal coupler 2 races on new R&P $ 1,870.00 $ 1,000.00 Titanium spindles 3 1/4" bolt center Ti spud straight shaft $ 175.00 $ 100.00 Shadow weight jacker 2.900" ID 3" collapsed 4" extended $ 325.00 $ 162.50 Cast aluminum rocker arm covers Chevy w/left side breather powder coated red $ 200.00 $ 75.00 Dash mount PS reservoir 9"x5"x2" $ 70.00 $ 30.00 Beast front Axles 50" and 52" $ 265.00 $ 150.00 Red Devil Steel brake rotors used on pavement .810"x12" 8 on 7.625" BC $ 495.00 $ 275.00 Beast radiator by Saldana lay down type no cap measures 18 1/4"x16 1/2"x2" $ 335.00 $ 150.00 Beast radiator by saldana lay down type no cap measures 20 3/4"x20"x2" $ 335.00 $ 150.00 Fluidyne radiator stand up no cap 20"x13 1/2"x2" 2-1/2"NPT top 1-1/2" NPT bottom $ 300.00 $ 125.00 Fluidyne radiator stand up no cap 22"x14"x1/2" 2- 1/2"NPT top 1- 1/2" NPT bottom $ 300.00 $ 125.00 XYZ bird cages wing and non-wing pickups with dual row bearings (pr) $ 400.00 $ 175.00 Tilton onboard starter 10 tooth bolt in style for Silver Crown car $ 685.00 $ 340.00 Tilton onboard starter 9 tooth pinch clamp style for Silver Crown car $ 685.00 $ 340.00 Tilton Billet output housing 4.25" ball $ 1,200.00 $ 600.00 Tilton Cast output housing 4.25" ball $ 1,200.00 $ 500.00 Tilton 74 tooth flywheel $ 525.00 $ 260.00 Tilton 5 1/2" OT-III $ 775.00 $ 387.50 Tilton Silver Crown mount power steering pump to bell housing Chevy $ 200.00 $ 100.00 Tilton 26 spline steel yoke shaft $ 650.00 $ 500.00 Tilton Release bearings $ 120.00 $ 60.00 Tilton Clutch Cover assembly with pressure plate and 2 floaters fresh from Tilton $ 500.00 $ 250.00 Wilwood 60˚ brake mount & balance bar assembly w/ 1" & 7/8" master cylinders $ 320.00 $ 150.00 Engler 2 11/16 injectors with stacks, spool, nozzles for Mopar W9 & W9-RP heads $ 3,600.00 $ 1,800.00

We accept Pay Pal a 3% surcharge will be added Weld 15" Magnum sprint spline rears 11/22/2011 Quantity LIST PRICE SALE PRICE 18" Wide Wheels 2 15X18X5 OBL$ 550.00 $ 250.00 3 15X18X5 OBLw/CVR$ 550.00 $ 250.00 3 15X18X3 OBL w/CVR$ 550.00 $ 250.00 17" Wide Wheels 1 15X17X3 OBLw/CVR$ 540.00 $ 325.00 1 15X17X5 OBLw/CVR$ 540.00 $ 325.00 Our 17 inch wheels were only ran a few times and are just like new the 17x5 is new in the box 16" Wide Wheels 1 15X16X3 OBLw/CVR$ 530.00 $ 225.00

Left rear wheels 2 15X14X5 OBL$ 480.00 $ 270.00 5 15X14X6 OBL$ 480.00 $ 270.00 1 15X14X6 DBL$ 610.00 $ 300.00 4 15X15X6 DBL$ 610.00 $ 325.00

15" Direct mount front wheels 3 15X8X4 OBLw/CVR$ 340.00 $ 150.00 3 15X8X3 OBLw/CVR$ 340.00 $ 150.00 3 15X8X3 No Lock$ 220.00 $ 100.00 2 15X8X3 No Lock w/CVR$ 284.00 15" Front 6 pin XL wheels 2 15X8X4 No Lock$ 345.00 $ 125.00 2 15X10X7 New never ran No Lock$ 360.00 $ 230.00 38

DBL=Double bead lock IBL = Inner bead lock OBL = Outer bead lock OBLw/CVR = Outer bead lock with cover Center Lock uses single center nut with no need for pressure plate 15 X 18 X 5

Diameter Width Offset Silver Crown open 360 engine

Mopar W9-RP built by Stanton maintained by Gaerte. 14 races since new 0 races since fresh Engler injectors, ATI super damper, Mopar water pump, Barnes oil pump, JE pistons, MSD ignition Dyno sheets upon request

Very strong and reliable motor. Over $40,000 new Exceptional price at $17,500 11/22/2011 Used 2005 F-5 Many feature wins makes this car one of the best producers we have ever had. In just two races this car won over $55,000! Jerry Coons won $30k in this car at Oskaloosa and a few weeks later Tracy Hines won $25,000 at Eldora with it. The car has many feature wins and a few track records. The car comes with carbon fiber left side body panels. Frame and Body: $1250 Basic Kit: $1700 Deluxe Kit: $2700 Roller:$9,500

2009 F-5 Only a handful of races on this car. Never crashed. We ran a few races in 2010 with it and 2 races with it in 2011. Has been a good car the few times we have run it.

Frame and Body: $1450 Basic Kit: $1900 Deluxe Kit: $2900 Roller:$9,700

Beast Pavement Sprint car Multiple track records and too many feature wins to list. This car performs every time out. Car driven by Hines, Steele, Tyler, Armstrong, Pierce, Jessup, Bliss and maybe a few more! Frame and body: $3000 Basic Kit: $4000 Deluxe Kit: $5000 Roller: $12,500 Frame and body Cowl, Radiator box, left and right side panels, left and right rear panels, hood, arm guard, right and left front panels, nose, right side header panel, floor pan, and Dzus buttons

Basic kit Frame and body parts plus Front Axle, Front and rear bumpers, Left and right nerf bars, rear motor plate and rear radius rod plates*.

Deluxe kit All parts listed above plus Anti-roll bar arms, links, and stop, Rear torsion arms, torsion stops Torsion bars, Torsion bar bushings, 3 Steel rod ends, 14 Aluminum rod ends, pan hard bar, 3 front radius rods, 2 rear radius rods, tie rod, drag link, Bird cages complete, Jacobs ladder W/ straps Upper steering gear bracket, Pitman arm, Brake pedal and master cylinder, brake return spring Pan hard bar clamp,

Roller All parts listed above plus Tail tank and bladder, Rear end, , torque tube, torque ball, Torque ball housing/retainer, KSE Gen2 steering gear, KSE power steering pump, PS pump mount, steering , water temp. & oil press. gauges, Spindles, Spindle shim kit, Weld front hubs, kingpins, shifter cable and shifter, Radiator, front and rear brake calipers, front and rear brake rotors, LF brake caliper mount, brake pads, 4 shocks, 2 coil springs, rear axle nuts and spacers, 4 wheels, Steering arms, hard brake lines, flex brake lines, Frame and Body: Beast , nose, hood, sun visor, dash, front scoop w/ inlet, right and left arm guard, left and right upper triangle, left and right lower flare, left and right axle enclosure, left and right engine panel, two left and two right cockpit panels, radiator bridge, Dzus buttons

Basic Kit: All parts above and MPD shifter and cable, Front Axle, Front and rear bumper, left and right nerfs, Rear motor plate (mag), Stock Beast rear arms and ARB Kit (ARB bar and arms),

Deluxe kit: All parts above and 4 steel rod ends, 18 aluminum rod ends, aluminum front pan hard bar, 2 pan hard chassis clamps, Beast rear pan hard bar, 4 front radius rods, 2 rear radius rods, Steel drag link, Steel tie rod, Beast bird cages w/bearings, Upper steering gear bracket, pitman arm, throttle pedal, Brake pedal, 2 brake master cylinders, Wilwood 60˚ brake cylinder mount and balance bar assembly

Roller: All parts listed above and MPD torque ball housing, MPD torque ball, MPD torque tube, Steel drive shaft and 10-10 coupler, front brake caliper mounts, front brake calipers, Front brake rotors, Titanium king pins, MPD steering arms, MPD titanium spindles, Spindle shim kit, MPD 6 pin front hubs, Winters rear end, water temp and oil pressure gauges, radiator, KSE right hand steering box, KSE pump, Steering wheel, PS pump mount, PS fluid reservoir, Steel inboard brake rotor and clamp, Wilwood inboard brake caliper and mount, Front brake rotors, Front brake rotor hats, hard brake lines, flex brake lines, Tail tank and bladder, Left and right wheel nuts, wheel spacers, Pro adjustable shocks with spring kits, 4 coil springs, 4 Weld wheels,

Revcon rear arms also available. 7500 Series Penske shocks

9" Threaded body shocks with 2.5" Coil over kit List Sell 2 5/6-3 Rebound Cockpit adjustable $ 580 $ 350 1 5/2-4 Rebound Cockpit adjustable $ 580 $ 350 1 5/1-3 Rebound Cockpit adjustable $ 580 $ 350 2 5/0 Non adjustable$ 350 $ 250

9" Smooth body shocks List Sell 2 4-6/5 Compression cockpit adjustable $ 500 $ 350 2 4/3-9 Rebound cockpit adjustable $ 500 $ 350

7" Threaded body shocks

8 Pavement sprint car cockpit adjustable shocks various valvings with 2.5" spring kit List $580 Sell $350 ea. Set of 4 $1300

Rebuild Kit A-E shims(90% are new) kit with O-rings, one wrench, one pressure gauge, one overflow ring everything needed to rebuild Penske shocks List $350 Sell $300