RF DIGITAL Modules and Kits Wireless Solutions This page of product is RoHS compliant. RF Digital manufactures an extensive line of fully integrated, low cost, high quality, high performance, configurable Wireless RF , Receiver & Transceiver Modules, suitable for nearly every type of application. RFDUINO BLUETOOTH ARM CORTEX M0 DEVELOPMENT TOOLS RF Digital RFduino Bluetooth ARM Cortex M0 Development Board delivers an Arduino compatible Development Kit with integrated Bluetooth 4.0 BLE all in a finger-tip sized board. The RFduino is compatible with Bluetooth 4.0 compatible and computers, allowing it to be wirelessly controlled through apps written by the end user or downloaded from RF digital. A USB shield is available to allow easy programming of the RFduino, and a variety of other shields include the RGB LED/Button shield, Servo shield, Prototyping shield, Relay shield, MicroSD shield, and a variety of battery shields for remotely powering the RFduino. MOUSER RF Digital Price Description STOCK NO. Part No. Each 975-RFD90101 RFD90101 Development Kit - Includes RFduino DIP and USB Shield 42.65 975-RFD90102 RFD90102 Development Kit - Includes RFduino DIP, USB Shield, RGB LED/Button Shield, Servo Shield, Prototyping Shield, and Dual AAA Battery Shield 119.99 975-RFD90103 RFD90103 Development Kit - Includes Rfduino DIP, USB Shield, RGB LED/Button Shield, Servo Shield, PCB USB Shield, Prototyping Shield, Single and Dual AAA Battery 219.99

Shields, CR2032 Battery Shield, Micro SD Shield and Dual Relay Shield RF Digital 975-RFD90104 RFD90104 Development Kit - Includes Rfduino DIP, USB Shield, RGB LED/Button Shield, Servo Shield, PCB USB Shield, Prototyping Shield, Single and Dual AAA Battery 299.99 Shields, CR2032 Battery Shield, Micro SD Shield and Dual Relay Shield 975-RFD90105 RFD90105 Development Kit - Includes Rfduino DIP, USB Shield, RGB LED/Button Shield, Servo Shield, PCB USB Shield, Prototyping Shield, Single and Dual AAA Battery Shields, 499.99 CR2032 Battery Shield, Micro SD Shield and Dual Relay Shield 975-RFD22102 RFD22102 Development Platform - Bluetooth 4.0 Low Energy BLE RF Module with Built-in ARM Cortex M0 for Rapid Development and Prototyping Projects 25.99 975-RFD22301 RFD22301 Bluetooth 4.0 Low Energy BLE RF Module With Built-In ARM Cortex M0 Microcontroller 14.99 975-RFD22121 RFD22121 USB Programming Shield Board 25.99 975-RFD22122 RFD22122 RGB LED/Pushbutton Shield - 2 Button Inputs with 10k Resistor Pull Downs and it also has an RGB LED with Series LEDs 13.99 975-RFD22123 RFD22123 Servo Shield - Drive up to 4 Servos and has a Dual Supply Input 16.99 975-RFD22124 RFD22124 PCB USB Shield Board 24.99 975-RFD22125 RFD22125 Proto Shield - Provides Access to the 3V Supply Rail and Ground 9.99 975-RFD22126 RFD22126 Dual AAA Battery Shield 21.99 975-RFD22127 RFD22127 Single AAA Battery Shield 21.99 975-RFD22128 RFD22128 CR2032 Coin Battery Shield 16.99 975-RFD22130 RFD22130 MicroSD Shield - Allows Easy Use of MicroSD for Access to Gigabytes of External Memory 16.99 975-RFD22131 RFD22131 Dual Relay Shield - Provides Two SPDT, Independently Controlled Relays 27.99 2.4 GHZ SERIAL TRANSCEIVERS Complete Compliance Approved & Certified, READY-TO-USE, 2.4 GHz wireless solution with built-in RFDP8 interference-tolerant user application protocol. Includes RFID, 32 Bit ESN, Logic Switch Transmitter / Receiver, 9600-8N1 Serial UART Transceiver and many easy-to-use addressable network modes. No development required at all, no RF layout, no code writing, all features are built-in. Be up and running with a wireless solution in minutes. The RFDANT’s Revolutionary Patent Pending design enables it to reach distances of 2,000 feet, while still being an Ultra Low Power device. This huge range is reached without any power amplifiers at all, it’s unique design is responsible for it reaching these great distances without any extra battery drain or extra power. The RFDANT makes it easy for you to satisfy GREEN directives due to its unique design and ultra high performance. The RFDANT fits in the palm of your hand and looks like an Antenna, but of course it is much more since it is the whole radio and processing system in one unit. There are no RF cables at all, simply connect +V, GND, and a few logic signal wires based on your application and you are done. There is no need for PCB layout either. You can directly connect to the 11 pin, 8 inch cable extending out of the bottom of the RFDANT. Features: • Runs on a single coin cell for years • Ultra small 15mm x 15mm footprint • WiFi interference tolerant • Fully contained, truly finished, ready to use module • Heavy 2.4GHz noise and interference tolerant • CE/ETSI/IC & FCC Certified and Approved • No external parts required • Typical range: 500ft (150m) • No RF layout required • 2uA ultra low power modes • Easy and ready-to-use, hand-held, eval and application boards available • Only 14mA current consumption at 0dbm TX and 17mA at RX Outdoor Dimensions Price Each MOUSER RF Digital Description Package Range (LxWxH) STOCK NO. Part No. (ft) (mm) 1 10 25 50 975-RFD21711 RFD21711 nRF24L01P SMA RF Module 8 Pin Header 300 11 x 22 x 2.5 39.99 36.65 34.07 29.73 975-RFD21712 RFD21712 nRF24L01P PCB Antenna RF Module 8 Pin Header 300 15 x 34 x 5.6 19.99 17.75 17.04 14.86 975-RFD21731 RFD21731 nRF24LE1 Transceiver RF Module, on-board chip antenna SMT 500 15 x 15 x 3.5 14.99 14.55 13.89 13.09 975-RFD21732 RFD21732 nRF24LE1 Transceiver RF Module on-board chip antenna (Includes 32 KHz Crystal) SMT 500 15 x 15 x 3.5 19.08 18.63 17.26 16.26 975-RFD21733 RFD21733 nRF24LE1 Transceiver RF Module with built in RFDP8 8-mode protocol. Includes on-board chip SMT 500 15 x 15 x 3.5 14.99 14.55 13.89 13.09 antenna 975-RFD21734 RFD21734 nRF24LE1 Transceiver RF Module for use with external antenna (Includes 32 KHz Crystal) SMT 300 15 x 15 x 3.5 21.15 20.66 19.14 18.03 975-RFD21735 RFD21735 nRF24LE1 Transceiver RF Module with built in RFDP8 8-mode protocol, for use with external SMT 3000 15 x 15 x 3.5 14.99 14.55 13.89 13.09 antenna EVALUATION BOARDS Price Each MOUSER RF Digital Description STOCK NO. Part No. 1 10 25 50 975-RFD21737 RFD21737 RFD21737 Evaluation Board with a mounted RFD21733 Module and a built in chip antenna 142.71 130.29 125.00 111.93 975-RFD21739 RFD21739 RFD21739 Evaluation Board with a mounted RFD21735 Module and SMA connector (Requires Antenna) 142.71 130.29 125.00 111.93 KEY FOB 1 Button 2 Buttons 3 Buttons

1 1

2 1 3 1 2 3 2

3 3

Price Each MOUSER RF Digital Description STOCK NO. Part No. 1 10 25 50 975-RFD21781 RFD21781 KEYFOB Transmitter with built in RFDP8 Application Protocol, 1 Button, 2.4 GHz CE, IC, FCC Approved 63.55 60.38 57.15 54.02 975-RFD21782 RFD21782 KEYFOB Transmitter with built in RFDP8 Application Protocol, 2 Button, 2.4 GHz CE, IC, FCC Approved 63.55 60.38 57.15 54.02 975-RFD21783 RFD21783 KEYFOB Transmitter with built in RFDP8 Application Protocol, 3 Button, 2.4 GHz CE, IC, FCC Approved 63.55 60.38 57.15 54.02 975-RFD21793 RFD21793 KEYFOB Transmitter with built in RFDP8 Application Protocol, Active RFID Tag, 3 Button 62.52 59.39 56.21 53.14

ACCESSORIES MOUSER RF Digital Price Description STOCK NO. Part No. Each 975-RFD21807 RFD21807 2.4 GHz RFDP8 USB Dongle based on FTDI USB IC and RFD21733 74.99 975-RFD21813 RFD21813 Stand Alone Prototyping RF Module based on the RFD21733 - DIP Package 26.65 975-RFD21815 RFD21815 Open Source Wireless Inventors Shield for Arduino based on the RFD21733 34.99 © Copyright 2015 Mouser Electronics © Copyright 2015 Mouser Electronics mouser.com/rfdigital (800) 346-6873 31