DOCSLIB.ORG

Pistol 212-241

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

Slides PISTOL INDEX FRONT-CUT SLIDES for GLOCK® 17/19/34 SLIDES for GLOCK® 43 Barrels ......................... 217-220 Magazines & Parts ............. 224-230 Foundation for a Superb D.I.Y. Pistol - Window Slide Maximize the Performance of Frames/Slides ................... 212-217 Magwells ..................... 222-223 Ergo Enhancements for Better Control Your Pocket Glock® With an Upgraded "Top Half" Grips & Screws ................ 239-241 Safeties ............................. 221 Our front cut slide allows you to build a custom Glock®- With our Front-Cut Slide Guide Rods ................... 221-222 Springs ....................... 230-232 style pistol from the ground up installed, you'll find your pocket RMS/RMSC ® PISTOL Glock becomes easier to operate Ignition Parts .................. 238-239 Triggers & Components ......... 232-238 with a slide already customized Cut Slide with front slide serrations. Our Front Cut Slides feature a unique without any change in its reliability Mag & Slide Releases ........... 223-224 wraparound slide serration design that aids in weapon manipulation, or size. The G43's greatest especially when checking the chamber. Serrations are cut to the strength is that it lets you carry a same depth as Glock® factory models to ensure lower slide rigidity. pistol with 6 rounds of centerfire Models are also available with top window cutout between the Blank Slide punch in an ultra-compact EDC package. The downside is the Slides front serrations. Slides start out as 17-4 stainless steel billet and are machined internally to factory specifications. Slides are compatible G43's such a small pistol (barely ® ® 6" OAL), you can have trouble getting a firm grasp on the slide to ® with any standard Glock 17 or 19 components. The factory Glock RMR SLIDE for GLOCK 19LS EXTENDED SLIDE FOR rear sight dovetail is machined, with a standard Glock® front sight rack it. And if you're under stress or your hands are wet or a little sweaty... Yeah, even more difficult to jack that first round into the Factory Sight Cuts + Window ® cut at the front. Heat treated and finished with a matte Black Nitride Stainless Steel Slide With a Bundle of Custom Features GLOCK 19 finish. Factory internal dimensions - so excellent compatibility chamber. Our slide gives you up to 60% more grasping surface by with factory and aftermarket components. Factory Glock® sight adding deep-cut serrations up front that wrap around the top of the Our RMR Slides for Glock® Build Your Own Hybrid "Long cuts. Models for Gen3 and Gen4 pistols. G26 slide accepts Gen1-4 slide. (This is also a big help when making a quick press check of the pistols feature a distinctive, Slide" Glock® parts; use #100-002-719 recoil guide/spring assembly. All models: chamber.) The serrations have crisp 90-degree edges that give you wraparound serration pattern dedicated tool required to install channel liner; we recommend excellent purchase, and they're cut to the same depth as the factory that aids in manipulating the Brownells offers many innovations for the Glock® #777-100-017. ab grooves - so there's no compromise of the slide's overall strength. slide, especially when checking These slides are machined from heat-treat hardened 17-4 stainless the chamber. (OK, we’ll admit pistol, but one of our most novel #078-000-366AV Slide for Gen3 Glock® 17, 8G172B14 ���$ 199.99 ® steel, with hard, wear-resistant matte black Nitride finish. Internal offerings now gives Glock fans ® it: the serrations look cool, too.) RMR Cut, No Window #078-000-368AV Window Slide for Gen3 Glock 17, dimensions are identical to factory slides, right down to the factory They also come with a pre-cut slot for easy, secure, low-profile the ability to mix and match 8G181Q43 ������������������������������������������������� 209.99 components to create a custom rear sight dovetail and front sight tenon cut. It will accept both factory mounting of a Trijicon RMR sight. All Front Cut RMR Slides also have 078-000-456AV Gen4 Slide for Glock® 17, 6H172N14 . 199.99 hybrid pistol ideally suited to their "iron" (actually, plastic) sights and any aftermarket sights that fit the standard Glock factory front and rear sight dovetails for "iron" sights. ® personal needs. The Brownells Extended Slide for Glock ® 19 enables #078-000-367AV Slide for Gen3 Glock 19, 8G172B14 . 199.99 factory cuts. This is the bare slide only. You will need to retain your Since the RMR sits low, it can easily co-witness with iron sights. In ® pistol's existing barrel (or an aftermarket upgrade) and recoil guide / addition, you can get your Front Cut RMR Slide with an optional owners of the popular G19 pistol to put an extended G17-length #078-000-369AV Window Slide for Gen3 Glock 19, slide on their guns. The result is a gun with a longer sight radius - for 8G181B43 . 209.99 spring assembly. You'll also need to install a firing pin. Window model FRAMES/SLIDES "window" cutout on top between the front serrations that reduces has a .863" x .285" window cut in the top of the slide ahead of the more accurate shooting - with the G19’s shorter frame, making it 078-000-457AV Gen4 Slide for Glock® 19, 8G173F94 . 199.99 weight and enhances airflow to keep the barrel cooler - ideal for ejection port, in place of the top serrations. This aids in barrel cooling, hard-working action competition pistols. Each Front Cut RMR Slide easier to carry concealed with less risk of "printing" through your 078-000-480AV Slide for Gen1-4 Glock® 26, ® slightly reduces the weight of the slide for faster cycling, and…well, starts life as a billet of 17-4 stainless steel that is machined to Glock® clothing. Another enhancement on our Extended Slide for Glock 8G172I14 . 199.99 19: wraparound, front-cut slide serrations that aid in manipulating it just looks cool, too. Shield model has a cutout for the super- factory specifications inside, so it’ll fit factory frames and accept fac- 078-000-516AV Window Slide for Gen3 Glock® 34, compact RMS/RMSC (Reflex Mini Sight/Reflex Mini Sight Compact) tory or aftermarket barrels and parts. Models available for Gen3 and the slide, especially for a quick check of the chamber. There are standard, factory-style serrations at the rear. You also get standard 8G219K99 ������������������������������������������������� 269.99 red dot reflex sights from Shield Sights. Accommodates the optic the Gen4 pistols. G26 slide accepts Gen1-4 parts; use #100-002-719 same way the RMR model above does, including retaining the factory recoil guide/spring assembly. All models: dedicated tool required to factory front and rear sight cuts on your Brownells extended slide so you can install any aftermarket sights that fit a Glock® factory slide. sight dovetail/tenon slot. Has front and rear side cocking serrations install channel liner; we recommend #777-100-017. Available with ONLY (none on top). Mounting screws for sight included. Blank slide ® distinctive top Window cutout or traditional solid top. Machined • Fits Gen3 Glock 19 frame ONLY comes with no cocking serrations or markings. Edges and corners from corrosion-resistant 17-4 stainless steel billet. Heat treated to • Machined from hardened, corrosion-resistant 17-4 stainless steel billet are chamfered. Comes unfinished with fine bead-blasted surface. add surface hardness. Available with three finishes: wear-resistant Slides Also fits G43X and G48. ab • Tough black Nitride finish with excellent wear resistance basic Black Nitride (BLK) finish, as well as a thin, extremely tough, #078-000-440AV G43 Slide w/"Iron" Sight Cuts, 8G165D00 ���$ 199.99 good-looking Bronze or Flat Dark Earth (FDE) physical vapor depo- • Accepts standard 9mm internal slide components SLIDE BLANKS for GLOCK® sition (PVD) coating. This slide is the ideal upgrade for your factory #078-000-441AV G43 WINDOW Slide w/"Iron" Sight Cuts, Glock 17 or 19 pistol - and the perfect top half for a new custom gun • Length: 7.21" 17/19/26/34 6H174P29 . 209.99 built on an 80% frame. NOTE: RMR slides include patented optic cut • 12 oz. wt. #078-000-452AV G43 Shield RMS/RMSC Slide, 8G193K85 . 229.99 technology pioneered by ZEV Technologies. ab A "Blank Canvas" for Window models have a cutout up front on top that reduces #078-000-453AV G43 Blank Slide, 8G142M86 . 174.99 ® Your Next Custom Pistol #078-200-001AV RMR Slide for Gen3 Glock 17, BLK, weight and enhances air flow to keep your barrel cool during long 8G192J44 . .$ 229.99 practice sessions - plus it gives your pistol a unique, futuristic flair. Masterpiece ® #078-200-003AV Window RMR Slide for Gen3 Glock RMR models also have a pre-cut slot for neat, secure, integrated Brownells Blank Slides for Glock® pistols come with the exterior 17, BLK, 8G203A47 ��������������������������������� 229.99 installation of a Trijicon® RMR red dot sight (mounting screws for left smooth and featureless so you can customize it exactly the way 078-000-495AV Window RMR Slide for Gen3 Glock® sight are even included). Blank slide is unfinished, ready for the you want it. Add cocking serrations, an optic mounting slot, and COVER PLATE 17, BRONZE, 8G211D37 ������������������������� 239.99 skilled gunsmith (or metal worker) to cut slide serrations and other cosmetic flourishes to make it entirely your own. (Yes, you will need FOR RMR-CUT SLIDES 078-000-497AV Window RMR Slide for Gen3 Glock® features exactly as needed by you - or your customer. But "custom" to bring some machining skills to the table!) Inside, the dimensions 17, FDE, 8G209N94 . 239.99 work doesn’t mean unnecessary work - comes with factory sight fully machined to factory dimensions, so your Brownells Blank Fills the Slot When You Choose To Run Your cuts. Then it’s ready to accept a custom finish; go plain or go wild ® Slide for Glock comes ready to fit a factory-spec frame and accept Pistol Without an RMR Sight 078-000-458AV Gen4 RMR Slide for Glock 17, BLK, or something in between.
Recommended publications
  • Semi Auto Pistols

    Semi Auto Pistols

    Section Five - Semi Auto Pistols Like revolvers, semi auto pistols have parts that are unique to them. In figure 1 below we have pointed out the most common parts to the semi auto handgun and give detailed descriptions. Figure 1 11 1. Slide – The slide gets its name from its movement back and forth on the pistol frame. During this movement it accomplishes many functions. As you will see in the animation video in the next section, the slide moves back and forth on the frame. During each cycle the slide will strip a cartridge off the top of the magazine and insert it into the chamber. When fired, the slide moves to the rear ejecting the cartridge in the chamber. It then comes forward again, stripping a new cartridge from the top of the magazine and inserting it into the chamber. 2. Slide Stop Lever – The slide stop lever is known by many names – slide catch, slide lock, and slide release to name a few. Whatever name you decide to call it, it has the same functions – locking the slide to the rear of the frame or releasing the slide from the rear of the frame. Most slide stops are engaged after the last round is fired from a magazine so you can easily tell the gun is empty. Once a new magazine is inserted the slide stop can be depressed, releasing the slide, which then pushes a new cartridge into the chamber. Some firearms do not have slide stop levers. (See Figure 2 bottom left picture.) To lock the slide open on these types of firearms you should insert the magazine and see if that locks the slide to the rear.
  • August 2011.Pdf

    August 2011.Pdf

    NGPAug11Full 6/23/2011 1:33 PM Page 1 IF YOU DON’T SEE WHAT YOU NEED, ASK US! GERMAN POLICE MAGAZINE POUCH HK 300 .22 LR BARREL CZ 455 BARREL SETS This is an original police-issue We recently acquired These pouch for single stack the last available interchangeable magazines. The black leather inventory of factory HK model 300 rifle barrel sets from CZ USA provide quick pouch is marked Bund 8465- parts. This new 19.7” barrel is in the and easy caliber change capabilities for 12-192-0015 and includes a snap-button white and includes polygonal rifling. the model 455 bolt action rimfire rifle. closure and 2” belt loop. Fits magazines Quantities are limited. Each set features a 20.5” blued steel for Walther P5, P1 & P38, Sig Sauer ITEM#SGN0811-15 $224.95 barrel, 5 round polymer magazine and P220, P225, P226, P228 & P229, S&W assembly/disassembly tools. Barrels are 39/59 and many other similar sized HK SL7 STOCK & HANDGURAD SET hammer forged and include 6-groove magazines. Pouch is in used, fair to good We have a limited rifling with 1/16” twist (.22 caliber) and condition. Quantities are limited. supply of brand new, 1/9” (.17 HMR). The .22 LR Lux barrel set ITEM#SGN0811-10 $7.95 factory walnut stock comes with sights and a magazine spacer, which are not required for the WALTHER P5 BELT HOLSTERS and handguard sets for the SL7 semi-automatic .308 rifle. other sets. These are Hoppner & ITEM#SGN0811-16 $299.95 .22 LR Lux Barrel Set .
  • Product Catalog

    Product Catalog

    PRODUCT2007 CATALOG NEW FOR 2007 LETTER FROM THE PRESIDENT Dear fellow shooters and hunters, At CZ-USA we are constantly adding new products and configurations to our CZ-USA is approaching its 10th Anniversary. product line to meet the sporting needs of the US customer. We are doing CZ 75 P-01 CZ RAMI P 10 years of serving American customers everything that we can to help our customers have a safe and successful with LaserGrips page 30 has left a permanent mark on me. I love the experience when using our products in the field, competition, or daily life. page 32 outdoors and the best of friends were met on hunting trips. I have visited very remote CZ 452 AMERICAN WITH 16" BBL places this past year and when I walked page 5 to a gun store and asked whether they carry CZ guns and the answer was “yes”, I knew we must have done something right. I felt gratitude to all customers, dedicated NEWCZ 550 ULTIMATE HUNTING RIFLE employees and loyal CZ owners who carried page 18 the word out all the way to the remote areas. The Uhersky Brod plant is the largest small arms factory in the world, I felt extremely proud to be associated with including over 200 acres of buildings alone. The factory was built in 1936. CZ over and over again. Just 12 months after the ground was broken, the first machines were turned on. Today’s portfolio includes superior bolt-action rifles (both rimfire and CZ 527 American left hand 10 years ago we started a long journey and centerfire) and semiautomatic pistols.
  • Buyer's Guide

    Buyer's Guide

    BUYER'S GUIDE EN 01-20 "Perfection" stands for our commitment to uncompromising quality, future-oriented manufacturing technologies and maximum customer satisfaction. This I guarantee through our status as a private, independent company. Gaston Glock, Founder Table of contents GLOCK Buyer’s Guide GLOCK BUYER'S GUIDE 06-07 ADVANCED MANUFACTURING 08-09 SAFE ACTION® SYSTEM 10-11 PISTOL SIZES 12-15 GLOCK 44 – 22 l.r. 16-17 TECHNOLOGIES 18-19 PISTOL OVERVIEW 20-21 GEN5 22-33 9 mm LUGER 24-25 SLIMLINE WITH RAIL 26-27 CROSSOVER MODELS 30-31 GEN4 34-35 40 S&W 36-37 MOS (Modular Optic System) 38-39 380 АUTO 40-41 SLIMLINE 42-43 10 mm AUTO 44-45 45 AUTO 46-47 357 SIG 48-49 PREVIOUS 50-51 45 GAP 52-53 COMPENSATED PISTOLS 54-55 CUTAWAY 56-57 TRAINING & PRACTICE 58-59 MAGAZINES 60-63 OPTIONS 64-67 ACCESSORIES 68-69 OUTDOOR 70 ARMORER’S COURSE 71 PARTNER PROGRAMS 72-74 FAN ITEMS WWW.GLOCK.COM Advanced Manufacturing Manufacturing process Every GLOCK pistol carries 100% GLOCK quality! By revolutionizing firearms production in the early 1980's, GLOCK became the worldwide leading pistol manufacturer and brought its manufacturing process to perfection. Full control of raw High level of vertical material production GLOCK has established stringent quality control Manufacturing activities range from tool making to procedures for internal and external resources. An molding and machining 100% of the components of example of this is the high quality weapon steel the final product. Created on the desks of the rese- being analyzed by the in-house metallurgical de- arch and development team, each GLOCK product partment.
  • Buyer's Guide

    Buyer's Guide

    BUYER'S GUIDE EN "Perfection" stands for our commitment to uncompromising quality, future-oriented manufacturing technologies and maximum customer satisfaction. This I guarantee through our status as a private, independent company. Gaston Glock, Founder Advanced Manufacturing Manufacturing process Every GLOCK pistol carries 100% GLOCK quality! By revolutionizing firearms production in the early 1980's, GLOCK became the worldwide leading pistol manufacturer and brought its manufacturing process to perfection. Full control of raw High level of vertical material production GLOCK has established stringent quality control Manufacturing activities range from tool making to procedures for internal and external resources. An molding and machining 100% of the components of example of this is the high quality weapon steel the final product. Created on the desks of the rese- being analyzed by the in-house metallurgical de- arch and development team, each GLOCK product partment. Only raw materials which comply with the is immediately linked to the toolmaking department specifications defined by GLOCK are accepted into by CAD construction drawings in order to build the the production process. necessary tools for the production process. This process includes hammer forging, CNC milling and turning, stamping of strip steel, winding of springs as well as polymer and metal injection molding. 54 GLOCK BUYER'S GUIDE 2018 Torture testing Quality Control – Certified Arctic temperatures or merciless heat, salt water, production procedures – mud or sand, professionals throughout the world engage in the most hostile environmental conditions ISO 9001 and the same is required of their GLOCK pistols. Ex- tensive tests are done in-house during the product GLOCK pistols have been designed to operate without design process as well as externally during purcha- compromise in extreme conditions of police and military sing procedures.
  • VP9 Operator's Manual

    VP9 Operator's Manual

    VP9 OPERATOR’S MANUAL 9 mm x 19 SAFETY RULES WARNING: A firearm has the capability of taking your life or the life of someone Please read this operator's manual before handling your firearm. The following safety else! Be extremely careful with your firearm. An accident can occur at anytime and is rules are placed in this manual by HK as an important reminder that firearm safety is your almost always the result of not following basic safety rules. responsibility. Firearms can be dangerous and can potentially cause serious injury, damage to property or death, if handled im prop er ly. 1. Never point a firearm at anyone or in any direction other than a SAFE direction, i.e. down range. 2. Treat all firearms as if they are always loaded. 3. Keep your finger off the trigger and out side of the trigger guard until your sights are aligned on the target and you are ready to fire. VP9 4. Keep your finger off the trigger and outside of the trigger guard while loading or unload ing the firearm. 5. Keep your finger off the trigger and outside of the trigger guard while pulling the firearm out of the holster or while returning it to the holster. Operator’s Manual 6. Be sure of your target and the backstop beyond. 7. Never give a firearm to or take a firearm from anyone unless the action is open and the magazine and/or chamber are free of any ammunition or brass. 8. Be sure that the ammunition you are using is factory loaded, is of the correct caliber for the firearm in which it is to be used, and that it is not damaged in any way.
  • United States Patent (19) 11 Patent Number: 4,974,493 Yeffman (45) Date of Patent: Dec

    United States Patent (19) 11 Patent Number: 4,974,493 Yeffman (45) Date of Patent: Dec

    United States Patent (19) 11 Patent Number: 4,974,493 Yeffman (45) Date of Patent: Dec. 4, 1990 54 SHOCK ABSORBING BUFFER AND RECOIL 4,042,442 8/1977 Dombroski et al. ................ 56/310 REDUCER 4,181,644 1/1980 Lehr .................................... 524/505 4,317,737 3/1982 Oswald et al. ........................ 252/28 76) Inventor: Paul L. Yeffman, 911 Sligo Creek 4,344,352 8/1982 Yates et al. ... ... 89/198 Pkwy., Takoma Park, Md. 20912 4,463,655 8/1984 Krieger ................. ... 89/196 4,522,107 6/1985 Woodcock et al. ...... ... 89/196 (21) Appl. No.: 286,741 4,754,689 7/1988 Grehl .................... ... 89/198 22 Filed: Dec. 20, 1988 4,833,808 5/1989 Strahan ................................ 42/1.06 51l Int. Cl. ................................................ F41A3/78 FOREIGN PATENT DOCUMENTS 52 U.S.C. ...................................................... 89/198 252941 12/1911 Fed. Rep. of Germany ........ 89/196 58 Field of Search ................. 89/177, 196, 198, 163, 526759 10/1921 France ...................... 89/196 89/198, 196, 44.01, 44.02 115512 5/1918 United Kingdom. ... 89/44.01 (56) References Cited 521272 5/1940M United Kingdom ............... 89/44.02 U.S. PATENT DOCUMENTS Primary Examiner-Charles T. Jordan 168,346 10/1875 Schultz............................... 89/44.02 Assistant Examiner-Stephen Johnson 834,578 10/1906 Johnson ................................ 89/198 57 ABSTRACT 1,563,675 12/1925 Tangley ... ... 89/196 1,646,699 10/1927 Loomis ................................. 89/198 An automatic pistol having a slide reciprocably 3,501,997 3/1970 Winsen et al. ..................... 89/44.02 mounted on a frame and having a plastic buffer member 3,662,648 5/1972 Maillard ............................
  • Confocal Microscopy Analysis of Breech Face Marks on Fired Cartridge Cases from 10 Consecutively Manufactured Pistol Slides*

    Confocal Microscopy Analysis of Breech Face Marks on Fired Cartridge Cases from 10 Consecutively Manufactured Pistol Slides*

    J Forensic Sci, 2012 doi: 10.1111/j.1556-4029.2012.02072.x PAPER Available online at: onlinelibrary.wiley.com CRIMINALISTICS Todd J. Weller,1,2 M.S.; Alan Zheng,3 B.S.; Robert Thompson,3 B.S.; and Fred Tulleners,2 M.A. Confocal Microscopy Analysis of Breech Face Marks on Fired Cartridge Cases from 10 Consecutively Manufactured Pistol Slides* ABSTRACT: Recent publications from the National Academy of Sciences have called for additional foundational research in the field of firearm and toolmark analysis. We examined test fires from 10 pistol slides with consecutively manufactured breech faces. A total of nine test fires from each pistol slide, for a total of 90 test fired cartridge cases, were compared using confocal microscopy combined with three-dimensional cross-correlation analysis algorithms. A total of 8010 comparisons were performed (720 matches and 7290 nonmatches). The average score for matches was 0.82 with a standard deviation of 0.06. The average score for nonmatches was 0.20 with a standard deviation of 0.03. Additionally, subclass toolmarks were observed on the breech faces, but the presence of subclass was not detected in the correlation analysis. There was no overlap of scores between matching and nonmatching test fires. This provides objective data that support the AFTE (Association of Firearms and Tool Mark Examiners) theory of identification. KEYWORDS: forensic science, firearm identification, confocal microscopy, consecutive manufacture, breech face, subclass marks, indi- vidual marks Firearms and toolmark examiners have previously studied the Two recent publications from the National Academy of Sciences microscopic marks produced by consecutively manufactured fire- have called for additional validation and foundational research arms and tools (1–3).
  • Operator's Manual

    Operator's Manual

    IF YOU EXPERIENCE AN LASERMAX LIMITED WARRANTY LaserMax is pleased to offer a five (5) year limited warranty for this See this sight installed at www.youtube.com/LaserMaxInc. ISSUE WITH YOUR product. To take advantage of this coverage, the product must be GUIDE ROD LASER registered no later than 90 days after purchase. PLEASE DO NOT RETURN IT This product may be registered by completing a Registration Form which may be found at www.lasermax.com/support or by contacting the LaserMax Customer Service REPLACEMENT PARTS TO THE STORE. Department at 1-800-527-3703. The LaserMax Limited Warranty extends specific legal LMS-112 battery cap assembly rights to the registrant. Other rights, which vary from state to state, may also apply. This product is warranted to be free from defects in material and workmanship at the time 05954-0-1 battery sleeve Contact LaserMax Customer Service: of purchase. This limited warranty does not cover expendable parts (ex: batteries), that have definite and predictable life expectancies. This warranty does not cover products LMS-113 slide lock spring assembly 800-527-3703 that LaserMax determines have been exposed to abnormal use in any way. Examples LMS-114 slide lock / activation switch (G42) of abnormal use include, but are not limited to, damage from mishandling, misuse or abuse, damage from exposure to abnormal conditions, damage from improper care LMS-115 slide lock / activation switch (G43) and maintenance, or installation of the product in or on any firearm model the product REMINDER LMS-377 4-pack 377 Silver Oxide batteries is not specifically advertised to be used with.
  • Manual Tcp Attention

    Manual Tcp Attention

    PT 738 INSTRUCTION MANUAL TCP ATTENTION THISBOOKLET The safety warnings in this booklet are important. By understanding the dangers inherent in the use of any firearm, and by taking the precautions described herein, you can enjoy complete safety in the use of your Taurus firearm. Failure to heed any of these warnings may result in serious injury to you or others, as well as severe damage to the firearm or other property. PT 738 TCP 02 ALWAYSKEEPTHEMUZZLEPOINTEDINASAFEDIRECTIONANDFINGEROFFTHETRIGGER. CONTENTS 1.Safetyprecautions Page 04 2.Gettoknowyourpistol Page 13 Specifications Page 14 TaurusSecuritySystem Page 15 3.Ammunition Page 16 4.Operatinginstructions Page 18 5.Disassembly/ Assembly Page 21 Disassembly Page 21 Assembly Page 23 6.Careandmaintenance Page 24 7.Explodedview Page 26 Partslist Page 27 8.TaurusServicePolicy Page 28 9.Tauruslimitedwarranty Page 29 CONTENTS 1.SAFETYPRECAUTIONS PISTOLS are classified as FIREARMS or DANGEROUS WEAPONS and are sold by us with the specific understanding that we are not responsible in any manner whatsoever for their improper or negligent handling or resale under local laws and regulations. Taurus shall not be responsible in any manner whatsoever for malfunctioning of the firearm, or for physical injury or property damage, resulting in whole or in part from (1) criminal or negligent discharge, (2) improper or careless handling, (3) unauthorized modifications, (4) defective, improper hand-loaded, or reloaded ammunition, (5) neglect, or (6) other influences beyond our direct and immediate control. This limitation applies regardless of whether liability is asserted on the basis of contract, negligence or strict liability (including any failure to warn). Under no circumstance shall Taurus be liable for incidental or consequential damages, such as loss of use of property, commercial loss and loss of earnings or profits.
  • A Review of Gun Safety Technologies

    A Review of Gun Safety Technologies

    U.S. Department of Justice Office of Justice Programs National Institute of Justice JUNE NATIONAL INSTITUTE OF JUSTICE 2013 RESEARCH REPORT A Review of Gun Safety Technologies BY MARK GREENE, Ph.D. U.S. Department of Justice Office of Justice Programs 810 Seventh St. N.W. Washington, DC 20531 Eric H. Holder, Jr. Attorney General Karol V. Mason Assistant Attorney General Greg Ridgeway Acting Director, National Institute of Justice This and other publications and products of the National Institute of Justice can be found at: National Institute of Justice http://www.nij.gov Office of Justice Programs Innovation • Partnerships • Safer Neighborhoods http://www.ojp.usdoj.gov JUNE NATIONAL INSTITUTE OF JUSTICE 2013 RESEARCH REPORT A Review of Gun Safety Technologies BY MARK GREENE, Ph.D. NCJ 242500 RESEARCH REPORT 3 Highlights • Since the mid-1990s, numerous teams have developed firearms with advanced gun safety technology—often called “smart guns” or “personalized firearms”—to varying degrees of technological maturity. • These firearms are designed to contain authorization systems which generally combine an authentication mechanism that actuates a blocking mechanism in a seamless process that is designed to take less time than handling and firing a conventional gun. • At least three products—two handguns and a shotgun—have been developed in the private sector by Armatix GmbH, Kodiak Industries, and iGun Technology Corporation that could at least be described as commercializable or pre-production. • There are no personalized firearms available commercially in the United States yet today, but Armatix and Kodiak are planning to bring their respective products to market in 2013. • Armatix of Germany has developed the Smart System which is composed of a .22 caliber pistol called the iP1 that is activated by the iW1, a device worn on the wrist like a watch that communicates using radio frequency identification (RFID).
  • CRT-03-04 Firearms Clearing / Loading Device

    CRT-03-04 Firearms Clearing / Loading Device

    MARIN COUNTY SHERIFF'S OFFICE COURT SERVICES DIVISION POLICY AND PROCEDURE MANUAL CHAPTER 3 – FACILITY OPERATIONS DATE CRT 03-04 June 1, 2001 PAGE 1 of 2 ______________________________________________________________________________________ FIREARMS CLEARING/LOADING DEVICE ______________________________________________________________________________________ POLICY It is the policy of the Marin County Sheriff’s Office to establish a procedure for the use of the firearms clearing/loading device (commonly referred to as a “loading barrel”) located in the Court Floor armory. Use of this device will greatly reduce the possibility of an accidental discharge of a handgun/carbine round exiting the armory space and causing injury/death. No firearm shall be loaded or cleared on the Court Floor without utilizing this device. PROCEDURE Components: One (1) Range Systems firearms clearing/loading device. Firearm (pistol or carbine). Procedure: Loading: Pistols: With the unloaded firearm in the holster, the operator shall insert a loaded magazine into the butt of the pistol. Draw the firearm from the holster and insert the muzzle into the port located on the front of the clearing/loading device until the front of the trigger guard rests against the bottom lip of the port. With the weak hand, operate the slide, chambering a round of ammunition. Ensure the weapon is pointed in a safe direction and immediately place the firearm in the holster and secure all security snaps. Remove the magazine and insert an additional round into the magazine to load it to capacity. Insert the loaded magazine into the pistol. Carbines: Operators shall insert the muzzle of the unloaded weapon into the port of the clearing/loading device until the muzzle nearly touches the ballistic insert inside the device.