CZ USA CZ 75 PISTOL INDEX RMR SLIDE FOR GLOCK® 17/19 KADET II RIMFIRE CONVERSION UNIT Barrels .........................218-222 Magazines & Parts .............226-230 Stainless Steel Slide With a Turns Your CZ Into A Training Frames/Slides ...................214-218 Magwells ......................... 224 Bundle of Custom Features Or Plinking Pistol Our RMR Slides for Glock® Grips & Screws ................239-240 Safeties .............................222 Complete slide assembly pistols feature a distinctive, wrap- enables the firing of .22 LR car- around serration pattern that aids Guide Rods ...................223-224 Springs .......................230-232 tridges in your centerfire CZ 75. in manipulating the slide, espe- PISTOL The Kadet is the same size as cially when checking the chamber. (OK, we’ll admit it: the serrations Ignition Parts ..................237-239 Triggers & Components ......... 232-237 the centerfire slide, but only the look cool, too.) They also come with a pre-cut slot for easy, secure, lower third moves, reducing the Mag & Slide Releases ...........224-226 low-profile mounting of a Trijicon RMR sight. All Front Cut RMR overall mass but still retaining the ability to Slides also have standard Glock factory front and rear sight dovetails cock the hammer. Slide stop will hold open for "iron" sights. Since the RMR sits low, it can easily co-witness with and release the slide the same as on origi- iron sights. In addition, you can get your Front Cut RMR Slide with nal pistol. Conversion kit is constructed of an optional "window" cutout on top between the front serrations forged steel and comes with an adjustable that reduces weight and enhances airflow to keep the barrel cooler rear sight, plus two 10-round .22 LR maga- ® - ideal for hard-working action competition pistols. Each Front Cut zines. Minor fitting may be necessary for SLIDES for GLOCK 17/19 19LS EXTENDED SLIDE for RMR Slide starts life as a billet of 17-4 stainless steel that is machined correct slide-to-frame fit on your specific ® to Glock® factory specifications inside, so it’ll fit factory frames and Foundation for a Superb D.I.Y. Factory Sight Cuts + Window pistol. Fits full-size CZ 75, plus these com- GLOCK 19 accept factory or aftermarket barrels and parts. Fits Gen3 Glock 17 Pistol - Ergo Enhancements for pact/sub-compact models: 75 Compact, P-01, P-06, PCR, and RA- and 19 pistols & components. Heat treated to add surface hardness Better Control Build Your Own Hybrid "Long MI. Magazines will extend beyond the bottom of grip frame on these & given a wear-resistant matte black Nitride finish. Pre-cut Trijicon Slide" Glock® models. Kadet will not work on the 97, 75 TS, P-07, or P-09 models. RMR mounting slot, plus factory front/rear sight cuts. This slide is the Our front cut slides allow you SPECS: Steel, blued. 8.11" (20.6cm) OAL. 4.72" (12cm) barrel length. 1.1 ® ideal upgrade for your factory Glock 17 or 19 pistol - and the perfect to build a custom Glock Gen3 Brownells offers many inno- lbs. (499g) wt. style pistol from the ground up vations for the Glock® pistol, but top half for a new custom gun built on an 80% frame. Available with with a slide already customized with front slide serrations. Our Front one of our most novel offerings distinctive top window cutout or traditional solid top. ab #100-015-794AU CZ 75 Kadet II Rimfire Unit, ® 7H448B99 � � � � � � � � � � � � � � � � � � � � � � � � �$ 461.99 Cut Slides feature a unique wraparound slide serration design that now gives Glock fans the ability #078-200-001AU RMR Slide for Gen3 Glock® 17, aids in weapon manipulation, especially when checking the cham- RMR Cut, No Window to mix and match components ® 8G206M99 � � � � � � � � � � � � � � � � � � � � � � � $ 229.99 ber. Serrations are cut to the same depth as Glock factory models to to create a custom hybrid pistol ® ensure lower slide rigidity. Models are also available with top window ideally suited to their personal #078-200-003AU Window RMR Slide for Gen3 Glock 17, 8G216H99 � � � � � � � � � � � � � � � � � � � � 229.99 cutout between the front serrations. Slides start out as 17-4 stain- needs. The Brownells Extended Slide for Glock® 19 enables own- less steel billet and are machined internally to factory specifications. ers of the popular G19 pistol to put an extended G17-length slide #078-200-002AU RMR Slide for Gen3 Glock® 19, ® 8G206H99 � � � � � � � � � � � � � � � � � � � � � � � 229.99 FRAMES/SLIDES Slides are compatible with any standard Glock 17 or 19 compo- on their guns. The result is a gun with a longer sight radius - for JAGERWERKS nents. The factory Glock® rear sight dovetail is machined, with a more accurate shooting - with the G19’s shorter frame, making it #078-200-004AU Window RMR Slide for Gen3 Glock® standard Glock® front sight cut at the front. Heat treated and finished easier to carry concealed with less risk of "printing" through your 19, 8G216B99 � � � � � � � � � � � � � � � � � � � � 229.99 BREACHER SLIDE for with a matte Black Nitride finish. Factory internal dimensions - so clothing. Another enhancement on our Extended Slide for Glock® excellent compatibility with factory and aftermarket components. 19: wraparound, front-cut slide serrations that aid in manipulating GLOCK® 17/19 Factory Glock® sight cuts. For Gen3 pistols. ab the slide, especially for a quick check of the chamber. There are ® standard, factory-style serrations at the rear. You also get standard #078-000-366AU Slide for Gen3 Glock 17, 6H185J99 � � $ 199.99 A Custom Job for Your ® factory front and rear sight cuts on your Brownells extended slide so #078-000-368AU Window Slide for Gen3 Glock 17, ® ® Glock in One Easy Step 6H195K99 � � � � � � � � � � � � � � � � � � � � � � � � 209.99 you can install any aftermarket sights that fit a Glock factory slide. GUNCRAFTER INDUSTRIES ® • Fits Gen3 Glock® 19 frame ONLY #078-000-367AU Slide for Gen3 Glock 19, 6H185N99 � � 199.99 50 GI® CONVERSION SYSTEM for GLOCK® The JagerWerks cus- #078-000-369AU Window Slide for Gen3 Glock® 19, • Machined from hardened, corrosion-resistant 17-4 stainless steel billet tom machines Glock® 6H195L99 � � � � � � � � � � � � � � � � � � � � � � � � 209.99 • Tough black Nitride finish with excellent wear resistance Steps Up Large-Frame factory slides to provide a high-quality option for up- • Accepts standard 9mm internal slide components Glock Pistol To Powerful .50 Caliber Cartridge grading your Glock in one • Length: 7.21" easy step: remove your pis- • 12 oz. wt. Drop-in conversion sys- tol's factory slide and barrel assembly and replace it with Window models have a cutout up front on top that reduces tem replaces the top end of the Breacher assembly. The Breacher slide has a window machined ® weight and enhances air flow to keep your barrel cool during long your Glock 20/21 pistol and SLIDE BLANKS for GLOCK on both sides of the slide to give it that ultimate customized look practice sessions - plus it gives your pistol a unique, futuristic flair. converts it to fire the hard-hitting, yet controllable, 50 GI cartridge. as well as saving some weight. Front and top cocking serrations RMR models also have a pre-cut slot for neat, secure, integrated Developed by Guncrafter, the 50 GI’s head is the same diameter 17/19 as a .45 ACP, so the rest of your pistol remains stock, allowing easy are added, providing possibly the most functional upgrade to any installation of a Trijicon® RMR red dot sight (mounting screws for Glock® handgun. A slot for mounting a Trijicon RMR red dot sight is A "Blank Canvas" for sight are even included). Blank slide is unfinished, ready for the conversion back to the original caliber. 50 GI ammo can be loaded machined in front of the factory rear dovetail. Included is a carbon Your Next Custom Pistol skilled gunsmith (or metal worker) to cut slide serrations and other to drive a 185 grain bullet at 1,200fps, with a felt recoil similar to 230 fiber cover plate to go over the slot when you don't have an RMR in- Masterpiece features exactly as needed by you - or your customer. But "cus- grain .45 ACP ball ammo. Delivers greater knock-down power, while remaining controllable during rapid fire. Conversion unit comes ful- stalled on your pistol. JagerWerks retains the Glock® barrel, sights, tom" work doesn’t mean unnecessary work - comes with factory 1 ® 2 extractor assembly, striker assembly, and striker safety plunger - Brownells Blank Slides for Glock pistols come with the exterior sight cuts. Then it’s ready to accept a custom finish; go plain or go ly assembled with 4 / " stainless steel barrel, firing pin, and guide rod why replace what already works very well? After the machining is left smooth and featureless so you can customize it exactly the way wild or something in between. Note: Due to changes in barrel-to- with captive recoil spring. Slide and barrel are precision machined done, JagerWerks finishes these slides in durable Black Nitride or you want it. Add cocking serrations, an optic mounting slot, and frame geometry caused by mating the longer slide with the smaller from stainless steel forgings to the same exacting tolerances as the Flat Dark Earth (FDE) Cerakote®. Or you can get a two-tone version cosmetic flourishes to make it entirely your own. (Yes, you will need Glock 19 frame, a standard Glock 17 barrel won’t work with this original factory components. Non-reflective, matte finish is durable that mixes both colors with a unique Battleworn look. to bring some machining skills to the table!) Inside, the dimensions slide. Instead, use the Brownells Extended Barrel for Glock® 19 (sold and good-looking. Black polymer fixed sights with easy to acquire fully machined to factory dimensions, so your Brownells Blank Slide separately, #078-000-383, plain, or #078-000-384, with threaded white dot on front sight and U-shaped white outline around rear #100-024-403AU Breacher G17 Slide, Black, for Glock comes ready to fit a factory-spec frame and accept Gen 3 muzzle).