STANDARD & HEAVY DUTY BRUSH CUTTER

MODEL SERIES 11-20 GPM 14-20 GPM SOFBC60 HDBCNS60-2 SOFBC72 HDBCNS72-2 SBC60 HDBCNS60-3 SBC72 HDBCNS72-3

OWNER’S MANUAL OWNER’S SAFETY RULES | OPERATING INSTRUCTIONS | MAINTENANCE PROCEDURES

SDHDBCMAN01 JANUARY 2021 Record product information below.

DEALER INFORMATION

PURCHASE DATE:

DEALER NAME:

ADDRESS:

PHONE NUMBER: MODEL COMPARISON

The Standard Duty (Standard Low Flow) Brush Cutter

• 11-20 gpm • 2-blades • Stump Jumper (blade holder) • 40HP right angle gear box • closed and open front design (optional mesh grill available on open front) • 3” cut capacity

Heavy Duty Open Front Brush Cutter

• 14-20 gpm • 2 or 3 blades available • fabricated blade holder • 4” cut capacity • RC100 gear box

Register this product at www.cidattachments.com.

SCAN TO VIEW OWNER’S MANUAL

STANDARD / HEAVY DUTY BRUSH CUTTER SDHDBCMAN01

Copyright © 2021 Construction Implements Depot, Inc. All Rights Reserved. This manual may not be reproduced or copied, in part or in whole without written permission from CID, Inc.

SDHDBCMAN01 / FIRST EDITION / JANUARY 2021 TABLE OF CONTENTS LETTER TO OWNER...... 6

SECTION 2 SAFETY INFORMATION

2.1 Introduction...... 8 2.2 Safety Symbols...... 8-10 2.3 Safety Decals...... 11-13 2.4 Skid Steer Tractor Requirements...... 14 2.5 General Safety Instructions...... 15

SECTION 3 OPERATING PROCEDURES 3.1 Unpacking Your Brush Cutter...... 17 3.2 How To Connect Brush Cutter Attachment...... 17-18 3.3 How To Start and Stop The Brush Cutter...... 19-20 3.4 First Time Use...... 20-21 3.5 Cutting Operations...... 22-24

SECTION 4 MAINTENANCE PROCEDURES 4.1 Maintenance Overview...... 26 4.2 Maintenance Schedule...... 27 4.3 Storage Tips...... 28 4.4 Blade Holder Removal...... 28-29 4.5 Blade Holder Installation...... 30 4.6 Blade Removal Procedures...... 30-31 4.7 Blade Installation Procedures...... 32 4.8 Shear Bolt Replacement...... 32 4.9 Gearbox Motor Maintenance...... 33-34 5.0 Torque Specification Table ...... 34

SECTION 5 TROUBLESHOOTING 5.1 Troubleshooting Chart...... 36

SECTION 6 SPECIFICATIONS 6.1 Specification Chart...... 38

SECTION 7 PARTS INFORMATION 7.1 Parts Assembly Diagrams...... 40-43

SECTION 8 WARRANTY INFORMATION 8.1 Limited Warranty Statement...... 45 8.2 Warranty Service Procedure...... 46

SAFETY ACKNOWLEDGEMENT FORMS...... 47-48 MAINTENACE LOG...... 50 THANK YOU

Dear Owner:

We appreciate your business and thank you for choosing Construction Implements Depot, Inc. as your provider of quality skid steer attachments. We are committed to providing you with a heavy duty product that will provide years of satisfaction and safe operation.

This manual will provide instructions on how to safely operate and maintain the Standard and Heavy Duty Brush Cutters. All users must read and understand this manual before operating this machine. Upon reading this manual, all users should sign the “Safety Acknowledgement Form” at the end of this manual. Store this manual in the document canister attached to this machine.

Please record your model and dealer information on the inside front cover. You will be asked to provide this information when ordering parts or requesting ser- vice. If you need more information on this product, contact your local dealer or visit www.cidattachments.com.

Sincerely,

The CID Team Construction Implements Depot, Inc.

6 Standard & Heavy Duty Brush Cutters January 2021 SECTION 2 SAFETY INFORMATION

7 2.1 Introduction

The following terms are used interchangeably throughout this manual.

Term Alternate Terms Used

Standard Duty & Heavy Duty Brush implement, attachment, product, Cutters machine, brush cutter, cutter skid steer loader, skid steer tractor, Skid Steer loader, prime mover Operator user, personnel

The Standard and Heavy Duty Brush Cutters are designed and manufactured with safety in mind. How