WARNING Or 16" (406 Mm) Centers
Total Page:16
File Type:pdf, Size:1020Kb
Models: WSP 420, WSP 420S, WSP 420W, Assembly Instructions - External Wall Plate WSP 425, WSP 425S, WSP 425W, *MAXIMUM LOAD WSP 430, WSP 430S, WSP 430W, CAPACITY: WSP 435, WSP 435S, WSP 435W, WSP 440, WSP 440S, WSP 440W, 150 lb (68 kg) WSP 445, WSP 445S, WSP 445W WSP 420, WSP 420S, and WSP 420W for studs on 16" (406 mm) IMPORTANT! Read entire instruction sheet before you centers. start installation and assembly. WSP 425, WSP 425S, and WSP 425W for studs on 16" (406 mm) centers, contains two electrical box knockouts. WSP 430, WSP 430S, and WSP 430W for studs on 20" (508 mm) WARNING or 16" (406 mm) centers. WSP 435, WSP 435S, and WSP 435W for studs on 20" (508 mm) or 16" (406 mm) centers, contains two electrical box knockouts. • Wall or mounting structure must be capable of sup- WSP 440, WSP 440S, and WSP 440W for studs on 24" (610 mm), porting a minimum static load of 600 lb (272 kg). 20" (508 mm) or 16" (406 mm) centers. WSP 445, WSP 445S, and WSP 445W for studs on 24" (610 mm), 20" (508 mm) or 16" (406 mm) centers, contains two electrical box knockouts. PARTS LIST PARTS LIST MODEL # MODEL # WSP 420 WSP 425 WSP 430 WSP 435 WSP 440 WSP 445 PART # QTY. DESCRIPTION PART # QTY. DESCRIPTION WSP 420S WSP 425S WSP 430S WSP 435S WSP 440S WSP 445S 9 A 024-1032 1 wall plate (black) 9 A 024-4032 1 wall plate (silver) 9 024-1033 9 024-4033 9 024-1034 9 024-4034 9 024-1035 9 024-4035 9 024-1036 9 024-4036 9 024-1037 9 024-4037 9 9 9 9 9 9 B 510-9108 4 1/4-20 x 1/2" phillips screw 9 9 9 9 9 9 B 520-9511 4 1/4-20 x 1/2" phillips screw 9 9 9 9 9 9 C 520-9521 4 1/4-20 x 2 1/2" phillips screw 9 9 9 9 9 9 C 520-9522 4 1/4-20 x 2 1/2" phillips screw 9 9 9 9 9 9 D 560-9708 4 toggler 9 9 9 9 9 9 D 560-9708 4 toggler 9 9 9 9 9 9 E 540-9440 8 washer 9 9 9 9 9 9 E 540-9444 8 washer 9 9 9 9 9 9 F 5S1-015-C03 4 #14 x 2.5" (6 mm x 65 mm) 9 9 9 9 9 9 F 5S1-015-C04 4 #14 x 2.5" (6 mm x 65 mm) washer head wood screw washer head wood screw PARTS LIST MODEL # A WSP 420W WSP 425W WSP 430W WSP 435W WSP 440W WSP 445W PART # QTY. DESCRIPTION 9 A 024-2032 1 wall plate (white) 9 024-2033 9 024-2034 9 024-2035 9 024-2036 B C 9 024-2037 9 9 9 9 9 9 B 520-9511 4 1/4-20 x 1/2" phillips screw 9 9 9 9 9 9 C 520-9522 4 1/4-20 x 2 1/2" phillips screw 9 9 9 9 9 9 D 560-9708 4 toggler E 9 9 9 9 9 9 E 540-9444 8 washer D 9 9 9 9 9 9 F 5S1-015-C04 4 #14 x 2.5" (6 mm x 65 mm) F washer head wood screw * Refers to maximum weight of TV or max. combined weight of TV, VCR and VCR Bracket. 1 of 4 ISSUED: 12-06-95 SHEET #: 024-9001-3 11-30-06 Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870. Use a stud finder to locate stud centers. Use wall plate (A) as a template to mark slot centers on stud centers. Note: Models WSP 430, WSP 430S, WSP 430W, WSP 435, WSP 435S, and WSP 435W can be mounted on both 20" or 16" centers. Models WSP 440, WSP 440S, A WSP 440W, WSP 445, WSP 445S, and WSP 445W can be mounted on 24", 20", or 16" centers. 2 of 4 ISSUED: 12-06-95 SHEET #: 024-9001-3 11-30-06 Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870. Steps 3 and 4 cover attachment to a metal stud wall. For attachment to a wood stud wall skip to step 5, page 4. FOR METAL STUD WALLS ONLY: Drill four 1/2" (13 mm) dia. holes through drywall and WARNING studs. Insert togglers (D) as shown below... • Make sure that mounting screws are anchored into the center of the studs. The use of an "edge to edge" stud finder is highly recommended. D ∅ 1/2" (13 mm) Pivot end of toggler. D Push into hole. Rotate toggler clockwise to wedge it against inside walls of metal stud. Slide plastic cap forward while pulling back firmly on ring. Break off excess. 3 of 4 ISSUED: 12-06-95 SHEET #: 024-9001-3 11-30-06 Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870. Attach wall plate (A) with 1/4-20 x 2.5" phillips screws (C), and washers (E). Four 1/4-20 x 1/2" phillips screws (B), and four washers (E) are provided to attach wall mount bracket (sold separately) to wall plate. A E C Step 5 covers attachment to a wood stud wall. FOR WOOD STUD WALLS ONLY drill four 5/32" (4 mm) dia. holes 2 1/2" (65 mm) deep. Attach wall plate (A) using four #14 x 2.5"(6 mm x 65 mm) wood screws (F). WARNING • Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power. • Never tighten in excess of 80 in • lb (9 N.M.). A • Make sure that mounting screws are anchored into the center of the studs. The use of an "edge to edge" stud finder is highly recommended. Four 1/4-20 x 1/2" phillips screws (B), and four washers (E) are provided to attach wall mount bracket (sold separately) to wall plate. F 4 of 4 ISSUED: 12-06-95 SHEET #: 024-9001-3 11-30-06 Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870. © 2006 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark of Peerless Industries, Inc. All other brand and product names are trademarks or registered trademarks of their respective owners..