DOCSLIB.ORG

Add-A-Leaf/Lev-A-Load

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Add-A-Leaf/Lev-A-Load Add-A-Leaf/Lev-A-Load Installation of a Rancho® Suspension System can increase the risk of vehicle rollover in abrupt maneuvers. Many states have laws governing modification of original equipment suspension systems. Such laws may prohibit any modification which adversely affects safety or any modification altering the suspension more than a specific number of inches. Rancho® Suspension recommends that you contact local law enforcement in your area before modifying your suspension. Rancho® does not recommend or endorse the use of its products in conjunction with those of other aftermarket suspension or lift kit manufacturers. Do not use on vehicles with a mechanical Link Rear Proportioning Valve. Height may vary due to condition of Stock Springs. Check U-bolt length prior to installation, to see if there is enough threaded length to accomodate the new Add-A-Leaf. Approx. ½Î to ¾Î. ADD-A-LEAF (FRONT & REAR) LEV-A-LOAD (REAR) FRONT REAR LEAF KIT FULL SIZE LEAF KIT SOFT RIDE HEAVY DUTY MINI-MID (ORDER 1 EACH) YEAR MODEL 1-1½Î R.Ht. 1-1½Î R.Ht. 1-2Î R.Ht. 2-3Î R.Ht. COMP KIT LEAF KIT BRKT KIT CHEVROLET CHEVROLET — Blazer 4 W.D. Full Size (K & V Models) 1995-92 4WD Blazer Full Size — — — — — — RS50616 1991-86 4WD Blazer Full Size RS50212 — RS60012 — — — RS50616 1991-69 4WD Blazer Full Size (ÛâçÎ Lift) — RS60612 — — — — — 1985-69 4WD Blazer Full Size RS50012 — RS60012 — — — RS50616 CHEVROLET — Blazer 2 W.D. Full Size (C Models) 1983-69 2WD Blazer Full Size — — RS60012 — — — RS50616 2WD Blazer Full Size (ÛâçÎ Lift) — RS60612 — — — — — CHEVROLET — Pickup (1/2 Ton) 4 W.D. (Silverado, K & V Models) 2007-99 4WD Silverado 1500 (1/2 Ton) — RS60645 — — — — — Pickup 1998-88 4WD K-1500 (1/2 Ton) — — — — — — RS50616 1987 4WD V-10 (1/2 Ton) RS50212 — RS60012 — — — RS50616 4WD V-10 (1/2 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1986-73 4WD K-10 (1/2 Ton) RS50012 — RS60012 — — — RS50616 4WD K-10 (1/2 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1972-63 4WD K-10 (1/2 Ton) RS50012 — RS60012 — — — RS50616 CHEVROLET — Pickup (1/2 Ton) 2 W.D. (Silverado, C & R Models) 1987 2WD R-10 (1/2 Ton) — — RS60012 — — — RS50616 2WD R-10 (1/2 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1986-73 2WD C-10 (1/2 Ton) — — RS60012 — — — RS50616 2WD C-10 (1/2 Ton) (ÛâçÎ Lift) — RS60612 — — — — — CHEVROLET — Pickup (3/4 Ton) 4 W.D. (Silverado, K & V Models) 1987 4WD V-20 (3/4 Ton) RS50212 — RS60012 — — — RS50616 4WD V-20 (3/4 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1986-73 4WD K-20 (3/4 Ton) RS50012 — RS60012 — — — RS50616 4WD K-20 (3/4 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1972-63 4WD K-20 (3/4 Ton) RS50012 — RS60012 — — — RS50616 CHEVROLET — Pickup (3/4 Ton) 2 W.D. (Silverado, C & R Models) 1989-87 2WD R-20, R-2500 (3/4 Ton) — — RS60012 — — — RS50616 2WD R-20, R-2500 (3/4 Ton) (ÛâçÎ — RS60612 — — — — — Lift) 1986-73 2WD C-20 (3/4 Ton) — — RS60012 — — — RS50616 2WD C-20 (3/4 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1972-63 2WD C-20 (3/4 Ton) w/ Rear Leaf — — RS60012 — — — RS50616 Spring CHECK TO MAKE SURE THERE IS AMPLE CLEARANCE FOR THE LEV-A-LOAD SPRING ASSEMBLY IN THE WHEEL WELL PRIOR TO ASSEMBLY. 1 Add-A-Leaf/Lev-A-Load ADD-A-LEAF (FRONT & REAR) LEV-A-LOAD (REAR) FRONT REAR LEAF KIT FULL SIZE LEAF KIT SOFT RIDE HEAVY DUTY MINI-MID (ORDER 1 EACH) YEAR MODEL 1-1½Î R.Ht. 1-1½Î R.Ht. 1-2Î R.Ht. 2-3Î R.Ht. COMP KIT LEAF KIT BRKT KIT CHEVROLET (Cont.) CHEVROLET — Pickup LUV (Light Duty) 4 W.D. 1982-72 4WD Luv Mini Pickup — — RS60612 — — — — CHEVROLET — Pickup LUV (Light Duty) 2 W.D. 1982-72 2WD Luv Mini — — RS60612 — — — — CHEVROLET — Suburban 4 W.D. 1991-86 Suburban 1500 4WD – Exc. Models RS50212 — RS60012 — — — RS50616 with lever-activated rear brake proportioning valve 1991-73 4WD Suburban (ÛâçÎ Lift) – — RS60612 — — — — — Exc. Models with lever-activated rear brake proportioning valve 1985-73 Suburban 1500 4WD – Exc. Models RS50012 — RS60012 — — — RS50616 with lever-activated rear brake proportioning valve 1972-63 Suburban 1500 4WD RS50012 — RS60012 — — — RS50616 CHEVROLET — Suburban 2 W.D. 1991-73 2WD Suburban — — RS60012 — — — RS50616 2WD Suburban (ÛâçÎ Lift) — RS60612 — — — — — 1972-63 2WD Suburban w/ Rear Leaf Spring — — RS60012 — — — RS50616 CHEVROLET — Van (1/2 Ton) Express & G Models - Inc. Sportvan 1990-71 G-10 (1/2 Ton) w/ rear leaf springs — — RS60612 — — — — DODGE DODGE — Pickup (1/2 Ton) 4 W.D. (Ram 1500 & W Models) 1993-61 4WD W100, W150 (1/2 Ton) RS50212 RS60612 RS60012 — — — RS50616 DODGE — Pickup (1/2 Ton) 2 W.D. (Ram 1500 & D Models) 1993-61 2WD D100, D150 (1/2 Ton) — RS60612 RS60012 — — — RS5061612 DODGE — Pickup (3/4 Ton) 4 W.D. (Ram 2500 & W Models) 1993-61 4WD W200, W250 (3/4 Ton) RS50212 RS60612 RS60012 — — — RS50616 DODGE — Pickup (3/4 Ton) 2 W.D. (Ram 2500 & D Models) 1993-61 2WD D200, D250 (3/4 Ton) — RS60612 RS60012 — — — RS5061612 DODGE — Pickup (1 Ton) 4 W.D. (Ram 3500 & W Models) 1993-61 4WD W300, W350 (1 Ton) RS50212 RS60612 RS60012 — — — RS50616 DODGE — Pickup (1 Ton) 2 W.D. (Ram 3500 & D Models) 1993-61 2WD D300, D350 (1 Ton) — RS60612 RS60012 — — — RS50616 DODGE — Pickup Ram 50 (D-50 Light Duty) 4 W.D. 1984 4WD D50 Mini — — RS60612 — — — — DODGE — Pickup Ram 50 (D-50 Light Duty) 2 W.D. 1985-79 2WD D50 Mini — — RS60612 — — — — DODGE — Ramcharger 4 W.D. 1995-61 4WD Ramcharger RS50212 RS60612 RS60012 — — — RS50616 DODGE — Ramcharger 2 W.D. 1995-61 2WD Ramcharger — RS60612 RS60012 — — — RS50616 DODGE — Van (1/2 Ton) Ram & B Models - Inc. Wagon 1990-71 B100, B150 (1/2 Ton) w/ rear leaf — — RS60612 — — — — springs FORD FORD — Bronco (Full Size Models) 4 W.D. 1977-66 4WD Bronco — RS60612 — — — — — 2 CHECK TO MAKE SURE THERE IS AMPLE CLEARANCE FOR THE LEV-A-LOAD SPRING ASSEMBLY IN THE WHEEL WELL PRIOR TO ASSEMBLY. Add-A-Leaf/Lev-A-Load ADD-A-LEAF (FRONT & REAR) LEV-A-LOAD (REAR) FRONT REAR LEAF KIT FULL SIZE LEAF KIT SOFT RIDE HEAVY DUTY MINI-MID (ORDER 1 EACH) YEAR MODEL 1-1½Î R.Ht. 1-1½Î R.Ht. 1-2Î R.Ht. 2-3Î R.Ht. COMP KIT LEAF KIT BRKT KIT FORD (Cont.) FORD — Pickup (1/2 Ton) 4 W.D. (F Series) 2014-09 4WD F-100, F-150 — — RS60501 — — — — 1993-80 4WD F-100, F-150 (1/2 Ton) w/ — — — — — — RS50616 2ÙâåÎ wide leaf springs FORD — Pickup (1/2 Ton) 2 W.D. (F Series) 1993-80 2WD F-100, F-150 (1/2 Ton) w/ — — — — — — RS50616 2ÙâåÎ wide leaf springs 1979-62 2WD F-100, F-150 (1/2 Ton) — — RS60012 — — — RS50616 FORD — Pickup (3/4 Ton) 4 W.D. (F Series) 2007-99 4WD F-250 Superduty (3/4 Ton) — — — RS60642 — — — 1993-80 4WD F-250 (3/4 Ton) w/ 2ÙâåÎ wide — — — — — — RS50616 leaf springs FORD — Pickup (3/4 Ton) 2 W.D. (F Series) 1993-80 2WD F-250 (3/4 Ton) w/ 2ÙâåÎ wide — — — — — — RS50616 leaf springs 1979-57 2WD F-250 (3/4 Ton) — — — — — — RS50616 FORD — Pickup (1 Ton) 4 W.D. (F Series) 2007-99 4WD F-350 Superduty (1 Ton) FORD — — — RS60642 — — — – Pickup Courier (Light Duty) 1984-72 2WD Courier Mini — RS60612 — — — — — FORD — Pickup Ranger (Light Duty) 4 W.D. 1992-83 4WD Ranger (ÛâçÎ Lift) — RS60612 — — — — — FORD — Pickup Ranger (Light Duty) 2 W.D. 1992-83 2WD Ranger (ÛâçÎ Lift) — RS60612 — — — — — FORD — Van (1/2 Ton) E Series - Inc. Club Wagon 1991-65 E-100, E-150 (1/2 Ton) w/ 2ÙâåÎ — — RS60612[½¸] — — — — rear leaf springs GMC GMC — Jimmy 4 W.D. Full Size (K & V Models) 1995-92 4WD Jimmy Full Size — — — — — — RS50616 1991-86 4WD Jimmy Full Size RS50212 — RS60012 — — — RS50616 1991-69 4WD Jimmy Full Size (ÛâçÎ Lift) — RS60612 — — — — — 1985-69 4WD Jimmy Full Size RS50012 — RS60012 — — — RS50616 GMC — Jimmy 2 W.D. Full Size (C Models) 1983-69 2WD Jimmy Full Size — — RS60012 — — — RS50616 2WD Jimmy Full Size (ÛâçÎ Lift) — RS60612 — — — — — GMC — Pickup (1/2 Ton) 4 W.D. (Sierra, K & V Models) 2007-99 4WD Sierra 1500 (1/2 Ton) Pickup — RS60645 — — — — — 1998-88 4WD K-1500 (1/2 Ton) — — — — — — RS50616 1987 4WD V-1500 (1/2 Ton) RS50212 — RS60012 — — — RS50616 4WD V-1500 (1/2 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1986-73 4WD K-1500 (1/2 Ton) RS50012 — RS60012 — — — RS50616 4WD K-1500 (1/2 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1972-63 4WD K-1500 (1/2 Ton) RS50012 — RS60012 — — — RS50616 GMC — Pickup (1/2 Ton) 2 W.D. (Sierra, C & R Models) 1987 2WD R-1500 (1/2 Ton) — — RS60012 — — — RS50616 2WD R-1500 (1/2 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1986-73 2WD C-1500 (1/2 Ton) — — RS60012 — — — RS50616 2WD C-1500 (1/2 Ton) (ÛâçÎ Lift) — RS60612 — — — — — [½¸] May need to reuse stock center pin, check length before disassembly. Add-A-Leaf may need to be drilled for larger stock center pin bolt. CHECK TO MAKE SURE THERE IS AMPLE CLEARANCE FOR THE LEV-A-LOAD SPRING ASSEMBLY IN THE WHEEL WELL PRIOR TO ASSEMBLY. 3 Add-A-Leaf/Lev-A-Load ADD-A-LEAF (FRONT & REAR) LEV-A-LOAD (REAR) FRONT REAR LEAF KIT FULL SIZE LEAF KIT SOFT RIDE HEAVY DUTY MINI-MID (ORDER 1 EACH) YEAR MODEL 1-1½Î R.Ht. 1-1½Î R.Ht. 1-2Î R.Ht. 2-3Î R.Ht. COMP KIT LEAF KIT BRKT KIT GMC (Cont.) GMC — Pickup (3/4 Ton) 4 W.D. (Sierra, K & V Models) 1987 4WD V-2500 (3/4 Ton) RS50212 — RS60012 — — — RS50616 4WD V-2500 (3/4 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1986-73 4WD K-2500 (3/4 Ton) RS50012 — RS60012 — — — RS50616 4WD K-2500 (3/4 Ton) (ÛâçÎ Lift) — RS60612 — — — — — 1972-63 4WD K-2500 (3/4 Ton) RS50012 — RS60012 — — — RS50616 GMC — Pickup (3/4 Ton) 2 W.D.
Load more

Recommended publications
  • Trends in the Static Stability Factor of Passenger Cars, Light Trucks, and Vans
    DOT HS 809 868 June 2005 NHTSA Technical Report Trends in the Static Stability Factor of Passenger Cars, Light Trucks, and Vans This document is available to the public from the National Technical Information Service, Springfield, Virginia 22161 The United States Government does not endorse products or manufacturers. Trade or manufacturers’ names appear only because they are considered essential to the object of this report. Technical Report Documentation Page 1. Report No. 2. Government Accession No. 3. Recipient’s Catalog No. DOT HS 809 868 4. Title and Subtitle 5. Report Date June 2005 Trends in the Static Stability Factor of Passenger Cars, Light Trucks, and Vans 6. Performing Organization Code 7. Author(s) 8. Performing Organization Report No. Marie C. Walz 9. Performing Organization Name and Address 10. Work Unit No. (TRAIS) Office of Regulatory Analysis and Evaluation Planning, Evaluation and Budget 11. Contract or Grant No. National Highway Traffic Safety Administration Washington, DC 20590 12. Sponsoring Agency Name and Address 13. Type of Report and Period Covered Department of Transportation NHTSA Technical Report National Highway Traffic Safety Administration 14. Sponsoring Agency Code Washington, DC 20590 15. Supplementary Notes 16. Abstract Rollover crashes kill more than 10,000 occupants of passenger vehicles each year. As part of its mission to reduce fatalities and injuries, since model year 2001 NHTSA has included rollover information as part of its NCAP ratings. One of the primary means of assessing rollover risk is the static stability factor (SSF), a measurement of a vehicle’s resistance to rollover. The higher the SSF, the lower the rollover risk.
    [Show full text]
  • 1974 JEEP CJ-5 304 V-8 from This…… to This………
    1974 JEEP CJ-5 304 V-8 From This…… To This……… NADA Guides Valuation: Date: Feb 12, 1012 Oct 1, 2012 Original MSRP: $ 3,574.00 $ 3,574.00 Low Retail: $ 5,300.00 $ 6,360.00 Average Retail (a 20-footer): $ 11,700.00 $ 14,760.00 High Retail: $ 16,300.00 $ 19,560.00 Purchase Price at Feb 12, 2012: $ 5,600.00 Serial #: J4F835TH37056 Vin Numbers for 1971 to 1974 Character 1st J = Jeep American Motors Make 1 = 1971 2 = 1972 2nd Year 3 = 1973 4 = 1974 Vin Numbers for 1971 to 1974 A = Toledo - Auto - LHD B = CKD - Auto - LHD F = Toledo - 3 Speed - LHD G = Toledo - 3 Speed RHD J = CKD - 3 Speed - LHD 3rd Plant - Transmission - Drive K = CKD - 3 Speed RHD M = Toledo - 4 Speed - LHD N = Toledo - 4 Speed - RHD O = CKD - 4 Speed - LHD P = CKD - 4 speed RHD 63 = CJ5 81" Wheelbase CKD 64 = CJ6 101" Wheelbase CKD 4th & 5th 83 = Universal, CJ-5, 84" Series Wheelbase, 4 Wheel Drive 84 = CJ6 104" Wheelbase 4 x 2 6th 5 = Open Body Body Style A = CJ5 - 3750 lbs E = CJ5 - 4150 lbs H.D. 7th R = CJ6 - 4750 lbs (max) Body Type - GVW S = CJ5 - 4500 lbs (max) T = 3750# GVW, model 83 A = 258 Six Regular B = 258 Six L/C E = 232 Six Regular 8th F = 232 Six L/C Engine H = 304 V8 Regular R = 134 four Regular T = 134 Four L/C SSN 9th - 13th ###### (37056) (Sequential Serial Number) Mileage: At July 17, 2007 when previous owner transferred title: 47700 miles Estimated by previous owner before new speedometer installed: 1000 miles At August 7, 2007 as recorded by emission testing station: 055 miles When Purchased – Feb 12, 2012: 1470 miles Total (+- 10%): 50170 miles Jeep Info: http://www.offroaders.com/tech/jeep/index.html Maintenance: Date Mileage Description Part # / Type / Spec Comments Mar 5, 2012 Engine Oil Change 10W-30 Mar 5, 2012 Replaced Air Cleaner Fram CA136 Mar 5, 2012 Replaced PCV valve Old one appeared to be working OK.
    [Show full text]
  • ONA Jeep History
    Contact: Daniela Ferro Ariel Gavilan Jeep® History January 6, 2016, Auburn Hills, Mich. - In July 1940, the U.S. military informed automakers that it was looking for a “light reconnaissance vehicle” to replace the Army's motorcycle and modified Ford Model-T vehicles. The Army invited 135 manufacturers to bid on production and developed a lengthy specification list for the vehicle, including the following: 600-lb. (272 kg) load capacity Wheelbase less than 75 inches (190 centimeters) Height less than 91 centimeters (36 inches) Smooth-running engine from 4 to 80 kilometers (3 to 50 miles) per hour Rectangular-shaped body Four-wheel drive with two-speed transfer case Fold-down windshield Three bucket seats Blackout and driving lights Gross vehicle weight below 1,300 lbs (590 kg). At first, Willys-Overland and American Bantam Car Manufacturing Company were the only two companies answering the call. Soon, however, Ford Motor Company entered the picture, and competition began among the three over which company would receive the lucrative government contract. Each company produced prototypes for testing in record time. Bantam's chief engineer, along with a team of Bantam executives, worked out a design, and the company built its field car within 49 days. Willys-Overland Vice President of Engineering Delmar G. Roos designed the Willys Quad. Ford developed its Model GP (General Purpose), known as the Pygmy, which was powered by an adapted Ford/Ferguson tractor. Each company delivered its prototype to the Army in the summer of 1940 and received approval to build 70 sample vehicles. The Army took possession of these vehicles in November 1940 at Camp Holabird, Maryland.
    [Show full text]
  • Winches Back! –December Rebate–
    GET $50 CASH ALL WINCHES BACK! –DECEMBER REBATE– Just Buy Qualifying Rugged Ridge® Winch To Receive $50. $50 Rebate on any Rugged Ridge off-road winch *ALL FIELDS ARE REQUIRED First Name* Last Name* Address (No P.O. Boxes)* City* State Zip* Phone* E-mail* Retailer Purchased From Date Purchased* Vehicle Year* Vehicle Make* Vehicle Model* How did you hear about Rugged Ridge, Omix-ADA or Alloy USA? Why did you choose our products? Brand Style/Look Price Warranty Quality Rebate Other Would you recommend our products? Yes No Completed Form Original UPC(s) Receipt/Invoice Mailed To: OMIX-ADA, INC. ATTN: REBATES 460 HORIZON DR., STE 400 SUWANEE, GA 30024 Terms & Conditions: Offer is good on purchases made at authorized retailers between December 1- 31, 2018. You must submit the rebate form within 60 days of the original purchase date. All requests must be postmarked no later than 60 days from retail invoice/receipt date. P.O. boxes will not be accepted. Maximum rebate for any one consumer and address is the greater of $2,000 or 10 rebate requests during this 12 month promotion period, whichever occurs first. All Omix-ADA family brand products must be on 1 invoice per rebate submission. Consumers are allowed up to 10 rebates per household during the promotion dates. Allow up to 8-10 weeks after rebate end date for processing of each rebate claim. Original label containing the UPC code (found on the outside of the product’s package) and an original receipt or invoice is required. Rebate checks will be paid in U.S.
    [Show full text]
  • Safety Research Report Index - Jeep CJ Rollover
    Safety Research Report Index - Jeep CJ Rollover A. BACKGROUND l. "Utility Vehicles Found Hazardous on Highways: Rollover & Ejection Rates are High," Status Report, IIHS, 5/6/80 2. "Jeeps & Other Utility Vehicles," Products L iability, Association of Trial Lawyers of A merica, 9/80. 3. Series of articles from San Francisco Chronicle on Jeep roll bar & legal actions against Jeep, 12/80. 4. "Serious Rollover Problems Found in Jeep CJ5 Utility Vehicles," IIHS Status Report, 12/22/80 5. Series of articles on IIHS study & "60 Minutes" report on Jeep rollover, various newspapers & journals, 12/22/80 through 10/81 6. "American Motors Settles FTC Charge on Jeep Ad Claims," Wall Street Journal, 12/1/81 7. "Warning Stickers Proposed for All New Utility Vehicles," Automotive News, 1/10/83 8. "Troubles in Jeep Country," Detroit Free Press, 5/23/83 9. "Study Confirms High Rollover Rate for Utility Vehicles," IIHS Status Report, 9/22/84 10. "FTC Cancels Double Warning on Jeep CJ," Automotive News, 2/25/85 11. "AMC Insurers Balk at High Loss Claims," Automotive News, 11/4/85 12. "Study Shows Rollover Fatalities Closely to Vehicles' Stability," IIHS Status Report, 8/23/86 13. "Small Passenger Vehicles a Problem," IIHS Status Report, 2/28/87 14. "NHTSA Denies Request for Rollover Standard," Automotive News, 1/4/88 15. "NHTSA Study Rebuts Stand on Rollovers," Automotive News, 4/25/88 16. "Rollover Worry Plagues Utility Vehicles: Memo Outlines Safety Concerns of Jeep's Maker"; "Jeep Defenders Still Bristle Over Old '60 Minutes' Show," Wall Street Journal, 5/23/88 17.
    [Show full text]
  • Jeep® Brand Celebrates 80 Years by Building an Electric Present and Future
    *** PLEASE DO NOT PUBLISH UNTIL 12:01 A.M. EASTERN, JULY 15, 2021 *** Jeep® Brand Celebrates 80 Years by Building an Electric Present and Future July 15, 2021, Auburn Hills, Mich. – On July 15, 1941, the former Willys-Overland Co. signed a contract with the U.S. War Department to begin production of the first military Jeep vehicle. Eighty years later, the Jeep brand thrives around the world with a product line-up that continues to expand into new segments, a devoted community of global customers and the utilization of 4xe electric vehicle technology as the natural evolution of 80 years of capability leadership "We’re celebrating our 80th anniversary by continuing to move upward and forward” said Christian Meunier, Jeep Brand Chief Executive Officer. "We’re expanding our portfolio into new segments, with the 3-row Jeep Grand Cherokee L, while setting a strong foothold in the premium SUV market, with our all-new Wagoneer and Grand Wagoneer. Next in our exciting global product pipeline is the introduction of the all-new Jeep Grand Cherokee, which will be equipped, for the first time, with plug-in-hybrid 4xe technology. We are fully committed towards a vision of zero emission future, and by 2025 we will be offering a zero-emission fully electric Jeep 4xe in every SUV segment” To celebrate its anniversary and to honor this zero emission vision, the Jeep brand posted today on its social media channels the 80th Anniversary version of the Jeep Life Electrified video which debuted during the 2021 Stellantis’ EV day. The video showcases the unique nature of the electrification of the Jeep brand through a couple's love story.
    [Show full text]
  • INSTALLATION INSTRUCTIONS Jeep CJ Radiator & Fan Kits
    Jeep CJ Radiator & Fan Kits; *Right hand inlet: stock application or Ford V8 conversion. Kit #51169 *Left hand inlet: GM V8 conversion. Kit #51168 Jeep CJ Radiator Only Kits; *Right hand inlet: stock application or Ford V8 conversion. Kit #51009 *Left hand inlet: GM V8 conversion. Kit #51008 Fits 1972-1986 Jeep CJs Note: Manual transmission preferred; automatic transmission requires a remote cooler. Note: Always read Instructions * Hardware Kit Includes: clip on nut (4ea), 5/16-18 bolts (4ea), 5/16” washers (4ea), 5/16” lock washers (4ea), 1/4- and verify kit contents prior to 20 t-nut studs (4ea), 1/4” washers (4ea), 1/4-20 locknuts installation. (4ea), brass overflow fitting (1ea) Radiator .....................................1 ea. Pre-Mounted Fan (Optional) ......1 ea. * Wiring Kit Includes (Optional): 40 amp fuse (1ea), Brackets, mounting to vehicle ....2 ea. fuse holder (1ea), thermostat knob (1ea), rubber probe Instruction Sheet .......................1 ea. cap (1ea), tie straps (6ea), blue 3-way connector (1ea), yellow butt connectors (2ea), yellow ring connectors Warranty Card ...........................1 ea. (2ea), yellow female spade connectors (2ea), blue female Flex-a-lite Decal .........................1 ea. spade connectors (2ea), green 14 guage wire (5ft), red *Hardware Kit ............................1 ea. 14 guage wire (6ft), red 12 guage wire (6ft), black 12 *Wiring Kit (Optional) .................1 ea. guage wire (6ft) INSTALLATION INSTRUCTIONS Removal of Existing Fan, Shroud & Radiator 1. BE SURE THE ENGINE IS COOL BEFORE PROCEEDING!! 2. Disconnect the negative (-) battery cable before proceeding with the installation. 3. Drain all coolant from the radiator. Use the factory drain plug if available. It may be necessary to remove the radiator cap to release vacuum inside the radiator for better draining.
    [Show full text]
  • On - Road Crash Experience
    ON - ROAD CRASH EXPERIENCE OF UTILITY VEHICLES FINAL TECHNICAL REPORT Richard G. Snyder Thomas L. McDole William M. Ladd Daniel J. Minahan February, 1980 Prepared for Insurance Institute for Highway Safety Washington, D.C. Highway Safety Research Institute The University of Michigan Ann Arbor, Michigan I I 4. Title d Subtitle 1 S. Report Oote On-Road Crash Experience of Utility Vehicles I. PubdyOr+zdon R.pat Ma. 7. *.Ml) Snyder, R.G., T.L. McDole, W.M. Ladd, UM-HSRI-80-7 4 D.J. Minahan 9. P&ng 0t)rrixdan Nu-4 Addtoss 10. Wwt Unit No. Highway Safety Research Institute The University of Michigan 1 1. bntroct or Gtont No. Ann Arbor, Michigan 481 09 12. *wing Nmd AUnr* Final Report Insurance Institute for Highway Safety May 1978 - February 1980 Watergate Six Hundred 14. +soring Agency Cd* Washington, D.C. 20037 IIHS 1 IS. hltuyNetor 1'6. Absnw! The purpose of this study was to investigate the on-road crash experi- ence, safety, and stability of utility vehicles. Selected for study among the off-road, multi-purpose passenger vehicles were the JEEP, Blazer, Bronco (pre-1978), Jimmy, Ramcharger, Trail Duster, Scout, Land Cruiser, and Thing. Data studied included more than 12,000 fatal and non-fatal utility vehicle crashes in the states of Arizona, Colorado, Maryland, Michigan, New York, New Mexico, North Carolina, Texas, and Washington. Also, FARS data, R.L. Polk & Company Vehicle Registration data, and data from Collision Per- formance and Injury Report (CPIR) files were examined. Selected vehicl es were subjected to physical measurement of the height of the center of gravity.
    [Show full text]
  • This Executive Order Is Valid Provided That the Installation Instructions
    (Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D-265-7 Relating to Exemptions Under Section 27156 of the Vehicle Code MOPAR PERFORMANCE JEEP 4.2 LITER MULTI-POINT FUEL INJECTION KIT Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of the Health and Safety Code and Executive Order G-45-9; IT IS ORDERED AND RESOLVED: That the installation of the Jeep 4.2 Liter Multi-Point Fuel Injection Kit manufactured by Mopar Performance, 26311 Lawrence Avenue, Center Line, MI 48015-9760 has been found not to reduce the effectiveness of the applicable vehicle pollution control system and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for the following 4.2 liter vehicle applications: . 1981-83 Jeep CJ-5, 1981-86 Jeep CJ-7, 1987-90 Jeep Wrangler, 1981-87 J Series Vehicles, 1982-86 Scrambler, and 1981-87 Grand Wagoneer. Vehicles with manual transmission use kit # P5249610 and automatic transmissions use kit # P5249686. The installation of the kit requires the removal of all emission and fuel delivery related components that are located within the engine compartment. The following items are a sample of the components removed: Air cleaner assembly, carburetor/throttle-body, intake manifold, distributor, electronic control module (ECM), oxygen sensor, carbon canister, EGR valve, air injection system (air tubes plugged), fuel pump, and other related vacuum valves and lines. The kit includes the following new Chrysler components: Heated oxygen sensor, intake manifold with a fuel injection rail, throttle body with open element air filter, electronic advance distributor, the factory EGR system is removed and discarded, electronic fuel pump, carbon canister, ECM, and a new coolant, MAP, and MAT sensor.
    [Show full text]
  • FCA Canada: Jeep® and Mopar Unveil Seven
    Contact: LouAnn Gosselin Daniel Labre FCA Canada: Jeep® and Mopar Unveil Seven Concept Vehicles Built for 50th Annual Easter Jeep Safari Vehicles Showcase a Wide Variety of Mopar and Jeep Performance Parts Jeep® Crew Chief 715: a salute to legendary Jeep military service vehicles Jeep Shortcut: inspired by the classic CJ-5 to handle tight, winding trails Jeep Renegade Commander: built to blaze a trail deep into the secluded wilderness Jeep Comanche: designed to be off-road ready with practical utility Jeep FC 150: heritage cab-over design, rich in history and capable of tackling any terrain Jeep Trailcat: Hellcat-powered off-roader capable of crawling or high-speed runs Jeep Trailstorm: added capability with a five centimetre (2-inch) lift kit, 37-inch tires and Dana 44 axles March 10, 2016, Windsor, Ontario - Seven new, ultra-capable Jeep® concept vehicles, featuring an array of Mopar and Jeep Performance Parts available to consumers, will conquer the famous and challenging trails of Moab, Utah, at Easter Jeep Safari, March 19-27. Thousands of off-road enthusiasts are expected to descend upon Moab this year to celebrate what will likely be the most popular Jeep Safari ever, as the 50th annual event coincides with the 75th anniversary of the Jeep brand. “Every year the Jeep team looks forward to pushing the limits with new, exciting and capable concept vehicles for our most loyal enthusiasts at the Easter Jeep Safari in Moab, where we receive a tremendous amount of valuable feedback,” said Mike Manley, Head of Jeep Brand – FCA Global. “This year is extra special, as together with our biggest fans, we celebrate Jeep’s 75th anniversary, as well as the 50th running of the Jeep Safari.
    [Show full text]
  • FCA US LLC Historical Timeline
    Contact: Shawn Morgan Christina Biache FCA US LLC Historical Timeline Explore the history of FCA US from the 1800s to present 2014 - Present In early 2014, Fiat Group acquires 100 percent ownership in Chrysler Group, paving the way to complete the union between the two groups in both financial and technical terms. The merger of an Italian company and an American company creates a multinational organization that operates in more than 140 countries and employs nearly 236,000 people. Fiat Chrysler Automobiles unveils the Group’s strategic plan for 2014-2018. This marks the beginning of a new phase for the now fully integrated global automaker, which pursues its ambitious strategic objectives while consistently delivering on the key financial targets set out in the plan. 2018 Michael Manley is appointed Chief Executive Officer of Fiat Chrysler Automobiles N.V. and Chief Operating Officer of the NAFTA region on July 21, 2018. 2017 Alfa Romeo launches the Stelvio, the brand’s first-ever SUV. Jeep® begins production of the Compass in India, bringing the brand’s production to a total of six countries around the world. Alfa Romeo announces its return to Formula 1 for the 2018 championship season, after more than 30 years away from the sport. Fiat begins production of the all-new Cronos sedan in Argentina for distribution in markets across Latin America. FCA signs a memorandum of understanding with BMW Group, Intel and Mobileye to develop a state-of-the-art autonomous driving platform. Mopar celebrates its 80th anniversary year. 2016 In early January, FCA completes the spin-off of Ferrari.
    [Show full text]
  • Espanol Jeep History
    Contact: Claudia Gregory La historia de la marca Jeep January 6, 2016, Auburn Hills, Mich. - En julio de 1940, las fuerzas armadas de los Estados Unidos informaron a los fabricantes de automóviles que estaban buscando un “vehículo ligero de reconocimiento”. El ejército invitó a 135 fabricantes a enviar propuestas y desarrolló una extensa lista de especificaciones para este vehículo, incluyendo: Capacidad de carga de 600 libras (272 kg) Distancia entre ejes inferior a 75 pulgadas (190 centímetros) Altura menor de 36 pulgadas (91 centímetros) Carrocería de forma rectangular Tracción en las cuatro ruedas con caja de transferencia de dos velocidades Parabrisas plegable Tres asientos individuales Peso bruto vehicular por debajo de 1,300 lb (590 kg) En un principio, Willys-Overland y American Bantam Car Manufacturing Company fueron las dos únicas empresas que respondieron a la solicitud. Sin embargo, poco después, Ford Motor Company decidió participar y comenzó la competencia para ver cuál de las tres recibiría el lucrativo contrato del gobierno. Cada empresa produjo prototipos para pruebas en tiempo récord. El ingeniero en jefe de Bantam, junto a un equipo de ejecutivos de Bantam, elaboró un diseño y la empresa terminó de construir su vehículo en 49 días. Delmar G. Roos, el Vicepresidente de Ingeniería de Willys-Overland, diseñó el Willys Quad. Ford desarrolló su modelo GP (General Purpose o Uso General), conocido como el Pygmy, basado en un tractor Ford/Ferguson adaptado para este proyecto. Todas las empresas entregaron sus prototipos al ejército durante el verano de 1940 y recibieron aprobación para la construcción de 70 vehículos de muestra.
    [Show full text]