Cyberpower - PR750ERTXL2U : PR750ERTXL2U

Total Page：16

File Type：pdf, Size：1020Kb

ENERGY STAR CERTIFIED Uninterruptible Power Supplies CyberPower - PR750ERTXL2U : PR750ERTXL2U Specifications Brand Name: CyberPower Model Name: PR750ERTXL2U Model Number: PR750ERTXL2U Power Conversion Mechanism: Static Minimum Configuration Tested Model PR750ERTXL2U Number: Active Output Power Rating Minimum 750 Configuration (W): Apparent Output Power Rating Minimum 750 Configuration (VA): Topology (ac): Line Interactive Topology and Product Type Combined: ac Line Interactive (VI) Application: Consumer Rated Input Voltage (V rms): 200-240 Rated Input Frequency (Hz): 50-60 Rated Output Voltage (V): 200-240 Rated Output Frequency (Hz): 50-60 Rack Mountable: Yes Height (mm): 87 Width (mm): 433 Depth (mm): 412 Normal Mode(s) Input Dependency Voltage Independent Characteristic (ac): Modular UPS: No Number of Normal Modes: Single-normal-mode Default Normal Mode (ac): Voltage Independent Test Input Voltage (V rms): 230 Test Input Frequency (Hz): 50 Test Output Voltage (V): 230 Test Output Frequency (Hz): 50 Total Input Power in W at 0% Load Min 0.63 Config Lowest Dependency (ac): Efficiency at 25% Load Min Config Lowest 98.1 Dependency (ac): Efficiency at 50% Load Min Config Lowest 98.3 Dependency (ac): Efficiency at 75% Load Min Config Lowest 98.6 Dependency (ac): Efficiency at 100% Load Min Config Lowest 98.6 Dependency (ac): Weighted Efficiency Calc Min Config Lowest 98.5 Dependency: Efficiency (%): 98.5 Modular UPS Module Tested Model Number: N/A Energy Storage Mechanism: Battery Energy Storage System Technology: Valve Regulated Lead-acid Battery Energy Storage System Configuration: Integral Energy Storage System Removable to No Another Room: Energy Storage System Runtime at 100% 10 Load (min.): Energy Storage System Runtime at 50% 27 Load (min.): Energy Storage System Warranty (yrs): 1 Energy Storage System Information URL: N/A Network Connections Available: Serial Port,USB Port,Ethernet Communication Protocols: HTTPS,Other,SNMP (v1, 2 or 3),HTTP Communication Protocol Other: TCP/IP, UDP Manufacturer Take Back Program: Yes Model Web Page URL: N/A Test Method Guidelines: N/A Date Available on Market: 2018-03-01 Date Certified: 2018-01-24 Markets: United States, Switzerland, Taiwan, Japan, Canada ENERGY STAR Certified: Yes Additional Model Information ELITE PRO 750ERT2U,ELITE PRO 750ERT2U,; ELITE PRO 750ERTXL2U,ELITE PRO 750ERTXL2U,; PR7500ERTXL2U JP,PR7500ERTXL2U JP,; PR750ERT2U JP,PR750ERT2U JP,; PR750ERT2U,PR750ERT2U, Captured On: 09/25/2021.

Copy Link

Recommended publications

ENERGY STAR Lamps V2.0 Revised Spec
ENERGY STAR® Program Requirements Product Specification for Lamps (Light Bulbs) Eligibility Criteria Version 2.0 Following is the Version 2.0 product specification for ENERGY STAR certified Lamps. A product shall meet all of the identified criteria if it is to earn the ENERGY STAR. To certify a lamp for ENERGY STAR, first determine which requirements in this document are applicable to the specific lamp. ENERGY STAR requirements are specific to lamps classified by the program as omnidirectional, directional, or decorative. This specification is generally organized by the requirements, not by lamp type or by light source technology. Partners are advised to review each section, and take note of exceptions where specific performance criteria need not be evaluated. 1. SPECIFICATION SCOPE & LAMP CLASSIFICATION 1.1. Included Products The ENERGY STAR Lamps specification (“this specification”) scope includes the lamp types intended to replace incandescent lamps as outlined in Table 1. The scope of this specification is limited to lamps with: Integrated ballasts and drivers intended to be connected to the electric power grid with the following ANSI standard base types: E26, E26d, E17, E11, E12, G4, G9, GU10, GU24, GU5.3, and GX5.3; and Rated nominal operating voltages of 120, 240 or 277 VAC, or 12 or 24 VAC or VDC. Table 1: Specification Scope and Classification Lamp Purpose and ANSI Standard Non-Standard Lamp Form Factor Performance Description Lamp Shape1 Omnidirectional – Self-ballasted compact fluorescent lamps (CFLs) intended to replace ANSI Lamps intended for general standard incandescent lamps that do not meet Lamp Shape Dimension purpose that meet applicable A, BT, P, PS, S and T requirements.
[Show full text]
What Is ENERGY STAR?
What is ENERGY STAR? • ENERGY STAR is a U.S. voluntary program that helps businesses and individuals save money and protect our climate through superior energy efficiency. 1 Who manages ENERGY STAR? • The U.S. Environmental Protection Agency manages the Energy Star program. • The U.S. Department of Energy develops energy test procedures for products covered by Energy Star and conducts product compliance testing. 2 How did ENERGY STAR start? • In 1992, the US Environmental Protection Agency (EPA) introduced ENERGY STAR as a voluntary labeling program designed to identify and promote energy- efficient products to reduce greenhouse gas emissions. • Computers and monitors were the first labeled products. • Through 1995, EPA expanded the label to additional office equipment products and residential heating and cooling equipment. • In 1996, EPA partnered with the US Department of Energy to cover more product categories. 3 What does ENERGY STAR cover? • The ENERGY STAR label is now on major appliances, office equipment, lighting, home electronics, new homes and commercial and industrial buildings and manufacturing plants. 4 What has ENERGY STAR Accomplished? • Through its partnerships with 18,000 private and public sector organizations, has successfully delivered energy and cost savings across the country, saving businesses, organizations, and consumers $24 billion in 2012 alone. • Over the past two decades, ENERGY STAR has been a driving force behind the more widespread use of such technological innovations as efficient fluorescent lighting, power management systems for office equipment, and low standby energy use. 5 Greenhouse Gas Savings Over Time 6 How does it work? -Products • EPA evaluates products sold in the US market.
[Show full text]
ENERGY STAR Program Requirements for Computers
® ENERGY STAR Program Requirements for Computers Partner Commitments Following are the terms of the ENERGY STAR Partnership Agreement as it pertains to the manufacture and labeling of ENERGY STAR qualified products. The ENERGY STAR Partner must adhere to the following partner commitments: Qualifying Products 1. Comply with current ENERGY STAR Eligibility Criteria, which define performance requirements and test procedures for Computers. A list of eligible products and their corresponding Eligibility Criteria can be found at www.energystar.gov/specifications. 2. Prior to associating the ENERGY STAR name or mark with any product, obtain written certification of ENERGY STAR qualification from a Certification Body recognized by EPA for Computers. As part of this certification process, products must be tested in a laboratory recognized by EPA to perform Computer testing. A list of EPA-recognized laboratories and certification bodies can be found at www.energystar.gov/testingandverification. Using the ENERGY STAR Name and Marks 3. Comply with current ENERGY STAR Identity Guidelines, which define how the ENERGY STAR name and marks may be used. Partner is responsible for adhering to these guidelines and ensuring that its authorized representatives, such as advertising agencies, dealers, and distributors, are also in compliance. The ENERGY STAR Identity Guidelines are available at www.energystar.gov/logouse. 4. Use the ENERGY STAR name and marks only in association with qualified products. Partner may not refer to itself as an ENERGY STAR Partner unless at least one product is qualified and offered for sale in the U.S and/or ENERGY STAR partner countries. 5. Provide clear and consistent labeling of ENERGY STAR qualified Computers.
[Show full text]
Energy Policy Act of 2005
PUBLIC LAW 109–58—AUG. 8, 2005 ENERGY POLICY ACT OF 2005 VerDate 14-DEC-2004 09:45 Sep 08, 2005 Jkt 039139 PO 00058 Frm 00001 Fmt 6579 Sfmt 6579 E:\PUBLAW\PUBL058.109 APPS10 PsN: PUBL058 119 STAT. 594 PUBLIC LAW 109–58—AUG. 8, 2005 Public Law 109–58 109th Congress An Act Aug. 8, 2005 To ensure jobs for our future with secure, affordable, and reliable energy. [H.R. 6] Be it enacted by the Senate and House of Representatives of Energy Policy Act the United States of America in Congress assembled, of 2005. 42 USC 15801 SECTION 1. SHORT TITLE; TABLE OF CONTENTS. note. (a) SHORT TITLE.—This Act may be cited as the ‘‘Energy Policy Act of 2005’’. (b) TABLE OF CONTENTS.—The table of contents for this Act is as follows: Sec. 1. Short title; table of contents. TITLE I—ENERGY EFFICIENCY Subtitle A—Federal Programs Sec. 101. Energy and water saving measures in congressional buildings. Sec. 102. Energy management requirements. Sec. 103. Energy use measurement and accountability. Sec. 104. Procurement of energy efficient products. Sec. 105. Energy savings performance contracts. Sec. 106. Voluntary commitments to reduce industrial energy intensity. Sec. 107. Advanced Building Efficiency Testbed. Sec. 108. Increased use of recovered mineral component in federally funded projects involving procurement of cement or concrete. Sec. 109. Federal building performance standards. Sec. 110. Daylight savings. Sec. 111. Enhancing energy efficiency in management of Federal lands. Subtitle B—Energy Assistance and State Programs Sec. 121. Low-income home energy assistance program. Sec. 122. Weatherization assistance.
[Show full text]
Climate Change Mitigation: EPA's Role in President Obama's Action
CLIMATE CHANGE MITIGATION EPA’S ROLE IN PRESIDENT OBAMA’S ACTION PLAN Sally Rand Office of Air and Radiation May 7, 2014 PRESIDENT OBAMA’S CLIMATE ACTION PLAN • Calls on the federal government to work together with states, tribes, cities, industries, consumers and the international community to address one of the greatest challenges of our time. • Reinforces the federal commitment to: – Cutting harmful pollution, – Protecting our country from the impacts of climate change, and – Leading an international effort to address a changing climate. 2 EPA MITIGATION ACTIONS UNDER PRESIDENT OBAMA’S PLAN • Reducing carbon pollution from power plants • Building a 21st century transportation sector • Cutting energy waste in homes, businesses, and factories • Reducing methane and HFCs • Advance public-private partnerships • Leading international efforts to address global climate change 3 4 CARBON STANDARDS FOR NEW POWER PLANTS • Standards for new power plants under 111(b) – Proposal issued on September 20, 2013, published January 8, 2014 • Follows usual approach to setting New Source Performance Standards • Reflects more than 2.5 million public comments on a 2012 proposal and recent trends in the electric power sector • Sets separate standards for different types of new power plants – Defines Best System of Emission Reduction that is based on adequately demonstrated technologies – Public comment period closes on May 9, 2014 5 CARBON GUIDELINES FOR EXISTING POWER PLANTS • Guidelines for existing power plants under 111(d) – Will follow EPA’s normal, open and transparent regulatory process • Proposal: June 2014—Currently at OMB for interagency review • Final: June 2015 • State 111(d) Plans: June 2016 – Existing power plants are different than new power plants • Guidelines are expected to be different from, and less stringent than, the proposed standards for new plants.
[Show full text]
ENERGY STAR® and Other Climate Protection Partnerships 2010 Annual Report ENERGY STAR® and OTHER CLIMATE PROTECTION PARTNERSHIPS 2010 ANNUAL REPORT
ENERGY STAR® and Other Climate Protection Partnerships 2010 Annual Report ENERGY STAR® AND OTHER CLIMATE PROTECTION PARTNERSHIPS 2010 ANNUAL REPORT CONTENTS Letter from the Administrator .............................................................................................................................................................................1 Executive Summary ..............................................................................................................................................................................................2 Highlights of 2010 .........................................................................................................................................................................................4 ENERGY STAR Overview ......................................................................................................................................................................................8 ENERGY STAR Qualified Products ....................................................................................................................................................................13 ENERGY STAR in the Residential Sector .........................................................................................................................................................19 ENERGY STAR in the Commercial Sector .......................................................................................................................................................23
[Show full text]
The ENERGY STAR Office Equipment Example
Market Transformation Through International Cooperation: The ENERGY STAR@ Office Equipment Example Scott Thigpen, Andrew Fanara, Alison ten Cate, EPA, Washington, DC Paolo Bertoldi, European Commission Energy Directorate, Brussels Toshimi Takigawa, Ministry of International Trade and Industry, Tokyo ABSTRACT Though most market transformation efforts take place at the national or even local level, this paper, using the example of the ENERGY STAR@Office Equipment Program, illustrates the possibilities of international cooperation for achieving larger scale transformations. Specifically, potential benefits include complete and global market transformation, production efficiencies, and reduction of potential barriers to trade, as well as administrative efllciencies in managing programs. To achieve these efficiencies, managers of market transformation efforts must overcome significant challenges such as dealing with multiple languages and cultures, differing power conditions and energy prices, and competing policy priorities. While these issues can be managed, it is also challenging to set programs’ efficiency levels. The paper reviews these challenges and benefits, citing the case of the ENERGYSTARinternational collaboration on office equipment, offering two years of experience between the U.S. and Japan, and anticipating Europe’s entry into the program. Introduction The ENERGY STAR programs were introduced in 1993 as part of President Clinton’s Climate Change Action Plan. This plan was based on the premise that greenhouse gas emissions in the United States could be significantly reduced through voluntary efforts. As noted in the Climate Action Report, the purpose of the program is to “bring high-efficiency consumer products into America households and buildings..., including those for space heating and cooling, water heating, lighting, refrigeration laundering, cooking and other services” (CAR 1997).
[Show full text]
Energy Star Faq Wp
Insightful ENERGY STAR ® FAQs for Staying Ahead of the Game Intertek Testing Services 70 Codman Hill Road Boxborough, MA 01719 www.intertek.com 1-800-WORLD LAB [email protected] Insightful ENERGY STAR ® FAQs for Staying Ahead of the Game Contents Introduction .....................................................................................................3 About EPA’s ENERGY STAR Program..................................................................3 Momentum Achieved.................................................................................. 3 Cause and Effect......................................................................................... 4 Qualification Procedures Changes..................................................................... 5 Certification Body Approval......................................................................... 5 Updates for Testing and Verification............................................................ 8 So You Want your Product ENERGY STAR Certified.......................................... 9 Third-Party Testing Options ......................................................................... 9 Data Acceptance Programs........................................................................ 11 Keeping Up with Spec Changes.......................................................................12 Revisions & Development .......................................................................... 12 Updates to the ENERGY STAR Partner Agreement............................................14
[Show full text]
Version 6.1 Computers Program Requirements (Rev
® ENERGY STAR Program Requirements for Computers Partner Commitments Following are the terms of the ENERGY STAR Partnership Agreement as it pertains to the manufacture and labeling of ENERGY STAR certified products. The ENERGY STAR Partner must adhere to the following partner commitments: Certified Products 1. Comply with current ENERGY STAR Eligibility Criteria, which define performance requirements and test procedures for Computers. A list of eligible products and their corresponding Eligibility Criteria can be found at www.energystar.gov/specifications. 2. Prior to associating the ENERGY STAR name or mark with any product, obtain written certification of ENERGY STAR qualification from a Certification Body recognized by EPA for Computers. As part of this certification process, products must be tested in a laboratory recognized by EPA to perform Computer testing. A list of EPA-recognized laboratories and certification bodies can be found at www.energystar.gov/testingandverification. 3. Ensure that any model associated with the ENERGY STAR name or mark meets the following standards: 3.1. Product material requirements as defined in restriction of hazardous substances (RoHS) regulations, as generally accepted. This includes exemptions in force at the date of product manufacture, where the maximum concentration values tolerated by weight in homogeneous materials are: lead (0.1%), mercury (0.1%), cadmium (0.01%), hexavalent chromium (0.1%), polybrominated biphenyls (PBB) (0.1%), or polybrominated diphenyl ethers (PBDE) (0.1%). Batteries are exempt. 3.2. The generally accepted attributes of a recyclable product at the date of product manufacture: where products shall be designed for ease of disassembly and recyclability where external enclosures, sub-enclosures, chassis and electronic subassemblies are easily removable with commonly available tools, by hand, or by a recycler's automated processes.
[Show full text]
ENERGY STAR Computers Final Version 8.0 Specification- Rev. April
® ENERGY STAR Program Requirements for Computers Partner Commitments Following are the terms of the ENERGY STAR Partnership Agreement as it pertains to the manufacture and labeling of ENERGY STAR certified products. The ENERGY STAR Partner must adhere to the following partner commitments: Certified Products 1. Comply with current ENERGY STAR Eligibility Criteria, which define performance requirements and test procedures for Computers. A list of eligible products and their corresponding Eligibility Criteria can be found at www.energystar.gov/specifications. 2. Prior to associating the ENERGY STAR name or mark with any product, obtain written certification of ENERGY STAR qualification from a Certification Body recognized by EPA for Computers. As part of this certification process, products must be tested in a laboratory recognized by EPA to perform Computer testing. A list of EPA-recognized laboratories and certification bodies can be found at www.energystar.gov/testingandverification. 3. Ensure that any model associated with the ENERGY STAR name or mark meets the following standards: 3.1. Product material requirements as defined in restriction of hazardous substances (RoHS) regulations, as generally accepted. This includes exemptions in force at the date of product manufacture, where the maximum concentration values tolerated by weight in homogeneous materials are: lead (0.1%), mercury (0.1%), cadmium (0.01%), hexavalent chromium (0.1%), polybrominated biphenyls (PBB) (0.1%), or polybrominated diphenyl ethers (PBDE) (0.1%). Batteries are exempt. 3.2. The generally accepted attributes of a recyclable product at the date of product manufacture: where products shall be designed for ease of disassembly and recyclability where external enclosures, sub-enclosures, chassis and electronic subassemblies are easily removable with commonly available tools, by hand, or by a recycler's automated processes.
[Show full text]
ENERGY STAR Lamps V2.1 Final Specification
ENERGY STAR® Program Requirements for Lamps (Light Bulbs) Partner Commitments Following are the terms of the ENERGY STAR Partnership Agreement as it pertains to the manufacture and labeling of ENERGY STAR certified products. The ENERGY STAR Partner must adhere to the following partner commitments: Certifying Products 1. Comply with current ENERGY STAR Eligibility Criteria, which define performance requirements and test procedures for Lamps. A list of eligible products and their corresponding Eligibility Criteria can be found at www.energystar.gov/specifications. 2. Prior to associating the ENERGY STAR name or mark with any product, obtain written certification of ENERGY STAR certification from a Certification Body recognized by EPA for Lamps. As part of this certification process, products must be tested in a laboratory recognized by EPA to perform Lamp testing. A list of EPA-recognized laboratories and certification bodies can be found at www.energystar.gov/testingandverification. Using the ENERGY STAR Name and Marks 3. Comply with current ENERGY STAR Brand Book, which define how the ENERGY STAR name and marks may be used. Partner is responsible for adhering to these guidelines and ensuring that its authorized representatives, such as advertising agencies, dealers, and distributors, are also in compliance. The ENERGY STAR Brand Book are available at www.energystar.gov/logouse. 4. Use the ENERGY STAR name and marks only in association with certified products. Partner may not refer to itself as an ENERGY STAR Partner unless at least one product is certified and offered for sale in the U.S. and/or ENERGY STAR partner countries. 5. Provide clear and consistent labeling of ENERGY STAR certified Lamps.
[Show full text]
ENERGY STAR Version 3.1 Imaging Equipment Program Requirements
ENERGY STAR® Program Requirements for Imaging Equipment Partner Commitments Following are the terms of the ENERGY STAR Partnership Agreement as it pertains to the manufacture and labeling of ENERGY STAR qualified products. The ENERGY STAR Partner must adhere to the following partner commitments: Qualifying Products 1. Comply with current ENERGY STAR Eligibility Criteria, which define performance requirements and test procedures for Imaging Equipment. A list of eligible products and their corresponding Eligibility Criteria can be found at www.energystar.gov/specifications. 2. Prior to associating the ENERGY STAR name or mark with any product, obtain written certification of ENERGY STAR qualification from a Certification Body recognized by EPA for Imaging Equipment. As part of this certification process, products must be tested in a laboratory recognized by EPA to perform Imaging Equipment testing. A list of EPA-recognized laboratories and certification bodies can be found at www.energystar.gov/testingandverification. 3. Ensure that any model associated with the ENERGY STAR name or mark meets the following standards: 3.1. Product material requirements as defined in restriction of hazardous substances (RoHS) regulations, as generally accepted. This includes exemptions in force at the date of product manufacture, where the maximum concentration values tolerated by weight in homogeneous materials are: lead (0.1%), mercury (0.1%), cadmium (0.01%), hexavalent chromium (0.1%), polybrominated biphenyls (PBB) (0.1%), polybrominated diphenyl ethers (PBDE) (0.1%), bis(2-ethylhexyl) phthalate (DEHP) (0.1%), benzyl butyl phthalate (BBP) (0.1%), dibutyl phthalate (DBP) (0.1%), or diisobutyl phthalate (DIBP) (0.1%). Batteries are exempt. 3.2. The generally accepted attributes of a recyclable product at the date of product manufacture: where products shall be designed for ease of disassembly and recyclability where external enclosures, sub-enclosures, chassis and electronic subassemblies are easily removable by hand with commonly available tools.
[Show full text]