DOCSLIB.ORG

Catalogue IKA IMLAB

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Catalogue IKA IMLAB IMLAB Tél +33 3 20 55 19 11 Centre d’Affaires de l’Horlogerie Fax +33 3 20 55 20 85 48 rue des Canonniers [email protected] F-59000 Lille France www.imlab.com EN Product Overview 2016. THE FASCINATING WORLD OF LABORATORY EQUIPMENT. Product Overview 2016. Product Overview 2016. We are committed to providing 4 62 100 innovations that make your work safer, /// MIXING /// CRUSHING /// HEATING/TEMPERING future-oriented and smarter. Magnetic Stirrers 4 Dispersers 64 Dry Block Heaters 100 /// Discover the fascinating world of laboratory Overhead Stirrers 28 Mills 88 Hotplates 106 equipment and analytical technologies. Shakers 42 Heating Baths 108 Temperature control 110 IKA is a world leader in the laboratory equipment and analytical technology segment. With our background of more than 100 years of experience, we possess long-established and proven expertise in 124 138 142 the development of innovative products for virtually all kinds of /// SEPARATION /// MECHANICAL / /// LABORATORY REACTORS laboratories throughout the world. ELECTRONIC ACCESSORIES The exceptional motivation and creativeness of our more than 800 Centrifuge 124 Accessories 138 Laboratory Reactors 142 employees is a vital factor in the development of new products Rotary Evaporators 126 as well as in the realization of new technologies that ensure our customers’ greater safety and competitive edge. 154 158 170 /// SOFTWARE /// ANALYTICAL TECHNOLOGY /// PACKAGES labworldsoft® 155 Calorimeters 158 Packages 170 CalWin 155 Our cover is a collage of featured pictures of our Instagram followers from around the globe. We thank you for your inspiration. IKAworldwide IKAworldwide /// #lookattheblue @IKAworldwide 2 www.imlab.com [email protected] Tél +33 3 20 55 19 11 3 Mixing | Magnetic stirrers Magnetic Stirrers Patented RET® Integrated temperature control- sensor for precise visc temperature control RET® control-visc with white coated heating plate! Integrated weighing function > Offers excellent chemical resistance 5 allows the user to measure > Easy to clean kg weight changes of up to 5,000 g Torque trend measurement Ncm % Viscosity changes in the medium can be measured by using a torque measurement device. IKA® mmaggnettic stirrreers are made for Scientists. When a product is deevelopped,d, The results can be depicted on the display the engineerrs focuus on safefeety,t power andid intelligeng ce.ee. ThThere is a complplepletee range oof magnetetiic stirrrrers to hanndle vav rious tasks, appliications and quaantint ties, USB/RS 232 interface either witth or witthout heatating capabbililities and with openen oro closed vesselsls. for conneting a PC, IKA® stirrers reeqquire upp to 25% less energy than other mannuufacturer‘s prooduducts. using labworldsoft® and enabling online updates of device software 4 www.imlab.com [email protected] Tél +33 3 20 55 19 11 5 Mixing | Magnetic stirrers Magnetic Stirrers with heating Best- seller! RH basic / digital with white coated Watch the video: heating plate www.ika.com/video > Offers excellent chemical resistance > Easy to clean RH basic | RH digital | RH basic 2 RH basic white RH digital white RCT basic RET basic Technical data Technical data Max. stirring quantity (H2O) 10 l 15 l 15 l Max. stirring quantity (H2O) 20 l 20 l Motor rating input / output 15 W 20 / 2 W 20 / 2 W Motor rating input / output 16 / 9 W 16 / 9 W Speed range 100 – 2000 rpm 100 – 2000 rpm 100 – 2000 rpm Speed range 50 – 1500 rpm 50 – 1700 rpm Speed display scale (0 – 6) scale LED Heat output 600 W 600 W Heat output 400 W 600 W 600 W Temperature range RT – 310 °C RT – 340 °C Temperature range RT – 320 °C 50 – 320 °C 50 – 320 °C Adjustable safety circuit 50 – 360 °C 50 – 360 °C Max. magnetic bar (L x Ø) – 80 mm 80 mm PT 1000: ± 1 K PT 1000: ± 1 K Safety circuit 400 °C (fixed) 100 – 360 °C 100 – 360 °C Control accuracy with sensor ETS-D5: ± 0.5 K ETS-D5: ± 0.5 K ETS-D5: ± 0.5 K ETS-D5: ± 0.5 K ETS-D6: ± 0.2 K ETS-D6: ± 0.2 K Control accuracy with sensor – ETS-D6: ± 0.2 K ETS-D6: ± 0.2 K Heating plate material aluminum alloy stainless steel 1.4301 stainless steel 1.4301 | stainless steel 1.4301 | Heating plate material stainless steel 1.4301 white ceramic white ceramic Heating plate dimensions Ø 135 mm Ø 135 mm Set-up plate dimensions Ø 125 mm Ø 135 mm Ø 135 mm Dimensions (W x D x H) 160 x 270 x 85 mm 160 x 270 x 95 mm Weight 2.4 kg 2.8 kg 2.8 kg Weight 2.5 kg 2.5 kg Ident. No. 0003339000 Ident. No. 0005019700 Ident. No. 0005019800 Ident. No. 0003810000* Ident. No. 0003622000 Ident. No. 0005029700 Ident. No. 0004678000 * PT 1000.60 included in delivery. Accessories starting page 20 - 27 6 www.imlab.com [email protected] Tél +33 3 20 55 19 11 7 Mixing | Magnetic stirrers Magnetic Stirrers with heating Possibility to connect pH pH electrode electrode TFT display for better TFT Display image quality and easy navigation Extra strong heating RET® control-visc with white coated Integrated temperature heating plate! Watch the video: sensor for precise temperature control > Offers excellent www.ika.com/video chemical resistance > Easy to clean RET® Ncm % Torque trend measurement control- Viscosity changes in the visc medium can be measured by using a torque measurement device. The results can be depicted on the display Phil S. Baran Ph.D. Darlene Shiley Professor The Scripps Research Institute - La Jolla, CA, USA Patented RET® control-visc RET® control-visc white Technical data Max. stirring quantity (H2O) 20 l 20 l Motor rating input / output 16 / 9 W 16 / 9 W Integrated weighing function allows Speed range 50 – 1700 rpm 50 – 1700 rpm 5 the user to measure weight changes kg of up to 5,000 g Heat output 600 W 600 W Temperature range RT – 340 °C RT – 340 °C Adjustable safety circuit 50 – 380 °C 50 – 380 °C USB interface to control and Control accuracy with sensor PT 100: ± 0.2 K PT 100: ± 0.2 K document all parameters using ® Heating plate material stainless steel 1.4301 white ceramic labworldsoft software and for updating your firmware Heating plate dimensions Ø 135 mm Ø 135 mm Dimensions (W x D x H) 160 x 270 x 85 mm 160 x 270 x 85 mm Weight 2.7 kg 2.7 kg Ident. No. 0005020000* Ident. No. 0005030000* The Magnetic Stirrer for Scientists Strongest and safest magnetic stirrer in its class with integrated weighing function and torque trend measurement * PT 100.70 included in delivery Accessories starting page 20 - 27 8 www.imlab.com [email protected] Tél +33 3 20 55 19 11 9 Mixing | Magnetic stirrers Magnetic Stirrers with heating C-MAG DIN Bushing 12878 for Elevated control panel Hot Top indicator HS 7 connecting an electronic for protection against to prevent burns contact thermometer spilled liquids PT 1000.60 temperature sensor included in the delivery. Elevated control panel LCD display for simultaneous Integrated temperature LCD for protection against Display display of target and actual sensor for precise spilled liquids temperatures temperature control Watch the video now: Hot Top indicator Ceramic set-up plate offers www.ika.com/video to prevent burns excellent chemical resistance to acid, bases and solvents Ceramic Ceramic set-up plate offers C-MAG excellent chemical resistance HS 7 to acid, bases and solvents Ceramic digital C-MAG HS 4 C-MAG HS 7 C-MAG HS 10 C-MAG HS 4 digital C-MAG HS 7 digital C-MAG HS 10 digital Technical data Technical data Max. stirring quantity (H2O) 5 l 10 l 15 l Max. stirring quantity (H2O) 5 l 10 l 15 l Motor rating input / output 15 / 1.5 W 15 / 1.5 W 15 / 1.5 W Motor rating input / output 15 / 1.5 W 15 / 1.5 W 15 / 1.5 W Speed range 100 – 1500 rpm 100 – 1500 rpm 100 – 1500 rpm Speed range 100 – 1500 rpm 100 – 1500 rpm 100 – 1500 rpm Heat output 250 W 1000 W 1500 W Heat output 250 W 1000 W 1500 W Temperature range 50 – 500 °C 50 – 500 °C 50 – 500 °C Temperature range 50 – 500 °C 50 – 500 °C 50 – 500 °C Display LED LED LED Display LCD LCD LCD Max. stirring bar length 30 mm 80 mm 80 mm Max. stirring bar length 30 mm 80 mm 80 mm Safety circuit 550 °C (fixed) 550 °C (fixed) 550 °C (fixed) Adjustable safety circuit 550 °C (fixed) 550 °C (fixed) 550 °C (fixed) Control accuracy with sensor – ETS-D5 / ± 0.5 K ETS-D5 / ± 0.5 K Control accuracy with sensor ± 0.5 K ± 0.5 K ± 0.5 K Heating plate material ceramic ceramic ceramic Heating plate material ceramic ceramic ceramic Set-up plate dimensions 100 x 100 mm 180 x 180 mm 260 x 260 mm Set-up plate dimensions 100 x 100 mm 180 x 180 mm 260 x 260 mm Weight 3 kg 5 kg 6 kg Weight 3 kg 5 kg 6 kg Ident. No. 0003581000 Ident. No. 0003581200 Ident. No. 0003581400 Ident. No. 0004240200* Ident. No. 0003487000* Ident. No. 0004240400* C-MAG HS 7 Package Ident. No. 0009015900 * PT 1000.60 included in delivery Package details on page 170 Accessories starting page 20 - 27 10 www.imlab.com [email protected] Tél +33 3 20 55 19 11 11 Mixing | Magnetic stirrers Multiposition Stirrers with / without heating RT 15 Heating foil for homogeneous temperature distribution of the heating plate Reverse rotation switch for better mixing results Wear-free magnetic coils for consistent and silent operation RT 5 RT 10 RT 15 RO 5 RO 10 RO 15 Technical data Technical data Number of stirring positions 5 10 15 Number of stirring positions 5 10 15 Max.
Load more

Recommended publications
  • Thomas Brand and Labforce Products
    Thomas Brand and labForce Products thomassci.com 800.345.2100 [email protected] For Latin Ameríca Thomas Scientic, LLC Family of Companies Phone: +1 786.314.7142 Address: MIAMI, FL 33182 1800 NW 135 Ave # 104 Email: [email protected] Table of Contents Equipment Supplies Balances .......................................................................... Pages 3 - 4 Bottles ............................................................................ Pages 9 -12 Bottle Top Filters ................................................................Page 12 Dry Baths .................................................................................Page 4 Jars .........................................................................................Page 12 Hot Plates/Hot Plate Stirrers .........................................Page 4-5 Jugs ....................................................................................... Page 13 Lab Lifts ...................................................................................Page 5 Microscope Slides/Cover Glass ..............................Page 13 - 14 Petri Dishes ..........................................................................Page 14 Laboratory Seating ...............................................................Page 6 Pipet Tips...................................................................... Page 14 - 15 Microscopes .......................................................................Page 6-7 Plates .....................................................................................Page
    [Show full text]
  • Spex Sampleprep Handbook 20
    HANDBOOK TIME LINE READ THE SPEX 1956-1983 SPEAKER ONLINE! Visit www.spexspeaker.com to read our unique trade journal that was published between 1956-1983. 1980s 1990s 2000s 2014 2 SPEX SamplePrep, LLC has been providing superior sample preparation equipment and supplies since 1954. Our mission is to provide quality products backed by exceptional service and expertise. Our equipment is used to prepare samples for a wide range of analytical technologies including XRF, ICP, GC-MS and PCR. Much of our equipment is also used for cutting-edge research in pharmaceuticals, superconductors, polymers, forensics, genetics and biotechnology. Our Products • Freezer/Mill® – Uniquely designed to • Katanax® Electric Fusion Fluxers – cryogenically grind samples normally Automated electric fluxers for borate fusions considered difficult or impossible to pulverize of cement, ores, ceramics and other materials at ambient temperature. for analysis by XRF, AA, ICP and wet chemistry. • Geno/Grinder® – Used for high-throughput • X-Press® – Laboratory press ideal for cell disruption and tissue homogenization. pressing sample disks for XRF, IR, and OES. • Mixer/Mill® – High-energy ball mills for • XRF Accessories – Spec-Caps® for supporting pulverizing brittle materials, mixing powders pressed disks, disposable X-Cells® and window and emulsions, mechanical alloying, and film for liquid samples, Prep-Aid® Binders and nanomilling. Grinding Aids. • Shatterbox® – Ring and puck mills used for • ShaQer - Specifically designed for preparation rapidly pulverizing brittle materials such as of samples using the QuEChERS method. cement, slag, ores, ceramics, etc. Our Customers For the past six decades, SPEX SamplePrep’s customers have relied on our unique knowledge and expertise to select the proper products for their sample preparation needs.
    [Show full text]
  • General Catalogue
    GENERAL CATALOGUE Sign up for MILLING | SIEVING | ASSISTING our newsletters! You will occasionally receive exclusive information on seminars/webinars, applications and product news. Subscribe now: The new Mixer Mill MM 500 www.retsch.com/newsletter (You may unsubscribe any time) 99.001.0010/E | Retsch GmbH Retsch-Allee 1-5 42781 Haan Germany Phone +49(0)2104/2333-100 Fax +49(0)2104/2333-199 E-Mail [email protected] Internet www.retsch.com Subject to technical modification and errors. GmbH Retsch © 2019 by Copyright MILLING | SIEVING | ASSISTING | SIEVING | MILLING INDEX 131 Model Description Page Model Description Page A P AS 200 basic Vibratory Sieve Shaker 92 PM 100 Planetary Ball Mill 60 AS 200 control Vibratory Sieve Shaker 93 PM 100 CM Planetary Ball Mill 60 AS 200 digit cA Vibratory Sieve Shaker 92 PM 200 Planetary Ball Mill 60 AS 200 jet Air Jet Sieving Machine 102 PM 400 Planetary Ball Mill 60 AS 200 tap Tap Sieve Shaker 100 PM 400 MA Planetary Ball Mill 60 AS 300 control Vibratory Sieve Shaker 94 PP 25 Pellet Press 128 AS 400 control Horizontal Sieve Shaker 98 PP 35 Pellet Press 128 AS 450 basic Vibratory Sieve Shaker 95 PP 40 Pellet Press 128 AS 450 control Vibratory Sieve Shaker 95 PT 100 Sample Divider 122 B PT 200 Sample Divider 123 BB 50 Jaw Crusher 12 PT 300 Sample Divider 124 BB 100 Jaw Crusher 13 PT 600 Sample Divider 124 BB 200 Jaw Crusher 13 R BB 250 Jaw Crusher 14 RM 200 Mortar Grinder 40 BB 300 Jaw Crusher 13 RS 200 Vibratory Disc Mill 44 BB 400 Jaw Crusher 14 RS 300 Vibratory Disc Mill 45 BB 500 Jaw Crusher 15 RT 6.5
    [Show full text]
  • 695 Subpart R—Special Industries
    Occupational Safety and Health Admin., Labor § 1910.255 adequate guards, in accordance with the suspended equipment in the event § 1910.219 of this part. of trolley failure. (5) Shields. The hazard of flying (4) Switch guards. All initiating sparks shall be, wherever practical, switches, including retraction and dual eliminated by installing a shield guard schedule switches, located on the port- of safety glass or suitable fire-resistant able welding gun shall be equipped with plastic at the point of operation. Addi- suitable guards capable of preventing tional shields or curtains shall be in- accidental initiation through contact stalled as necessary to protect passing with fixturing, operator’s clothing, etc. persons from flying sparks. (See Initiating switch voltage shall not ex- § 1910.252(b)(2)(i)(C) of this part.) ceed 24 volts. (6) Foot switches. All foot switches (5) Moving holder. The movable hold- shall be guarded to prevent accidental er, where it enters the gun frame, shall operation of the machine. have sufficient clearance to prevent (7) Stop buttons. Two or more safety the shearing of fingers carelessly emergency stop buttons shall be pro- placed on the operating movable hold- vided on all special multispot welding er. machines, including 2-post and 4-post (6) Grounding. The secondary and weld presses. case of all portable welding trans- (8) Safety pins. On large machines, formers shall be grounded. Secondary four safety pins with plugs and recep- grounding may be by center tapped sec- tacles (one in each corner) shall be pro- ondary or by a center tapped grounding vided so that when safety pins are re- reactor connected across the sec- moved and inserted in the ram or plat- ondary.
    [Show full text]
  • Biomass Pretreatment with the Szego Mill™ for Bioethanol and Biogas Production
    processes Article Biomass Pretreatment with the Szego Mill™ for Bioethanol and Biogas Production Merlin Raud 1,* , Kaja Orupõld 2 , Lisandra Rocha-Meneses 1 , Vahur Rooni 1, Olev Träss 3 and Timo Kikas 1 1 Institute of Technology, Estonian University of Life Sciences, 56 Kreutzwaldi Str., 51014 Tartu, Estonia; [email protected] (L.R.-M.); [email protected] (V.R.); [email protected] (T.K.) 2 Institute of Agricultural and Environmental Sciences, Estonian University of Life Sciences, 5 Kreutzwaldi Str., 51006 Tartu, Estonia; [email protected] 3 Department of Chemical Engineering and Applied Chemistry, University of Toronto, Toronto, ON M5S 3ES, Canada; [email protected] * Correspondence: [email protected] Received: 18 September 2020; Accepted: 19 October 2020; Published: 21 October 2020 Abstract: Results from an investigation of the mechanical size reduction with the Szego Mill™ as a pretreatment method for lignocellulosic biomass are presented. Pretreatment is a highly expensive and energy-consuming step in lignocellulosic biomass processing. Therefore, it is vital to study and optimize different pretreatment methods to find a most efficient production process. The biomass was milled with the Szego Mill™ using three different approaches: dry milling, wet milling and for the first time nitrogen assisted wet milling was tested. Bioethanol and biogas production were studied, but also fibre analysis and SEM (scanning electron microscope) analysis were carried out to characterize the effect of different milling approaches. In addition, two different process flows were used to evaluate the efficiency of downstream processing steps. The results show that pretreatment 1 of barely straw with the Szego Mill™ enabled obtaining glucose concentrations of up to 7 g L− in the hydrolysis mixture, which yields at hydrolysis efficiency of 18%.
    [Show full text]
  • Lab Startup Checklist
    Lab Startup Checklist CHEMICALS/REAGENTS Bottletop Burette HOODS Repeater Pipettor Buffers Powder Containment Hood Pipette Filler Standards Water TEMPERATURE CONTROL Applicable LabChem Product SAMPLE PREP Chiller Applicable RICCA Product Mini Centrifuge Water Baths Large Centrifuge Plug in Temperature Control Unit BALANCES AND WEIGHT Open Air Shaker High Dynamic Temperature Orbital Shaker Analytical Balance Control Circulator Vortex Mixer Micro Balance Temperature Sensor Hotplate/Stirrer Precision Balance Oil Baths Homogenizer/Overhead Stirrer Bench Scale Heating Mantle Dry Bath Floor Scale Dewar Flasks Rotor Mill Shipping Scale Thermometer Jaw Crusher Retail Scale Infrared Thermometer Cutting Mill Counting Scale Knife Mill ASTM Weights and Weight Sets Mortar Grinder LAB SUPPLIES OIML Weights and Weight Sets Sieve Shaker Disposable Gloves Sieves Lab Coats WATER ANALYSIS Tube Rotator Shoe Covers pH Meter Thermal Mixer Other PPE ORD Meter Thermal Cycler Various Tubes Conductivity Meter Microwave Digestion System Funnels TDS Meter Unguator Transfer Pipettes Electrodes Dewar Flasks Storage Racks Buffers Weigh Boats GLASSWARE Spatulas Scoops MOISTURE ANALYZERS Beakers Ohaus Moisture Analyzers Flasks Stirring Rods Tubes Tubing Cutters LIQUID HANDLING Bottles Distillation Apparatus Electronic Motorized Single Channel Extraction Apparatus Name Pipettor Glassware Startup Kit Company Multi-Channel Pipettor Phone Autoclavable Multi-Channel Pipettor Email Single Channel Fixed Pipettor REACTION Autoclavable Single Channel Fixed Pipettor Rotary Evaporator and Supporting Pipette Tips Equipment Syringe Tips Turnkey Ready Reactor™ Bottletop Dispenser encoresci.com | 800.454.2304 | [email protected].
    [Show full text]
  • Effect of Alkaline Pretreatments on the Enzymatic Hydrolysis of Wheat Straw
    Effect of alkaline pretreatments on the enzymatic hydrolysis of wheat straw N. Kontogianni, E.M. Barampouti, S. Mai, D. Malamis, M. Loizidou* National Technical University of Athens, School of Chemical Engineering, Unit of Environmental Science & Technology, 9 Iroon Polytechniou Str., Zographou Campus, GR-15780 Athens, Greece Keywords: alkaline peroxide, alkaline pretreatments, CellicCTec2, enzymatic hydrolysis, wheat straw Introduction Lignocellulosic materials are mainly composed of cellulose, hemicellulose and lignin. Lignin is considered to be the major barrier to the enzymatic hydrolysis of cellulose towards the production of fermentable sugars. Therefore, removing lignin from the lignocellulosic raw materials is favorable to reducing the recalcitrance of lignocellulose for enzymatic attack. For this purpose, various pretreatment technologies have been developed to improve the removal of lignin from the compact structure of plant cell walls and enhance the digestibility of cellulose by enzymes. Wheat straw is an abundant agriculture residue worldwide. In this work, wheat straw was firstly alkaline pretreated under selected chemicals and then subsequently it was enzymatically hydrolysed. Materials and Methods Wheat straw (WS) was obtained from Aspropyrgos province, Greece. The wheat straw was milled (FRITSCH Cutting mill Pulverisette 15) to 1 mm. The milled straw mainly composed of 33.8% cellulose, 45.1% hemicellulose, 16.4% lignin (15.4% Klason lignin and 1.0% acid-soluble lignin), and 4.7% ash. All chemical reagents were of analytical grade and used without further purification. The commercial enzymatic formulation CelliCTec2 was kindly donated by Novozymes (Denmark). Total cellulase activity (FPU) was measured against filter paper by the standard IUPAC method and found to be 223 FPU/mL.
    [Show full text]
  • PET Plus Viscometer User Manual
    Part No. 01/3514 November 2014 PET Plus Viscometer including Polymer Dryer and Polymer Grinder User Manual PET Plus User Manual 1 WARRANTY This instrument is warranted against defects in workmanship, material and design for one (1) year from date of delivery to the extent that AMETEK will, at its sole option, repair or replace the instrument or any part thereof which is defective, provided, however, that this warranty shall not apply to instru- ments subjected to tampering or, abuse, or exposed to highly corrosive conditions. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED AND AMETEK HEREBY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, WITHOUT LIMITA- TION, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. AMETEK SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, ANY ANTICIPATED OR LOST PROFITS. This warranty is voidable if the purchaser fails to follow any and all instructions, warnings or cautions in the instrument’s Instruction Manual. If a manufacturing defect is found, AMETEK will replace or repair the instrument or replace any defec- tive part thereof without charge; however, AMETEK’s obligation hereunder does not include the cost of transportation, which must be borne by the customer. AMETEK assumes no responsibility for dam- age in transit, and any claims for such damage should be presented to the carrier by the purchaser. TRADEMARKS AMETEK is a registered trademarks of AMETEK, Inc. LLOYD INSTRUMENTS is a trademark of AMETEK, Inc. DAVENPORT is a trademark of AMETEK, Inc. Other trademarks are the property of their respective owners.
    [Show full text]
  • Purity Tests for Modified Starches. Residue Monograph Prepared By
    Residue Monograph prepared by the meeting of the Joint FAO/WHO Expert Committee on Food Additives (JECFA), 82nd meeting 2016 Purity Tests for Modified Starches This monograph was also published in: Compendium of Food Additive Specifications. Joint FAO/WHO Expert Committee on Food Additives (JECFA), 82nd meeting 2016. FAO JECFA Monographs 19 © FAO/WHO 2016 1 of 4 PURITY TESTS FOR MODIFIED STARCHES Carboxyl groups Principle The carboxyl containing starch is equilibrated with mineral acid to convert carboxyl salts to the acid form. Cations and excess acid are removed by washing with water. The washed sample is gelatinized in water and titrated with standard alkali. NOTE: Native phosphate groups present in potato starch increase the titre found in this method (See NOTE 6). Reagents Hydrochloric Acid Solution, 0.10 N: Standardization unnecessary Sodium Hydroxide Solution, 0.10 N : Standardized Phenolphthalein Indicator, 1% Procedure If necessary, grind sample completely through a laboratory cutting mill to 20 mesh or finer, taking precautions to prevent any significant change in moisture, and mix thoroughly. Weigh accurately a sample containing not more than 0.25 milliequivalents of carboxyl (Note 1), and transfer quantitatively to a 150-ml beaker. Add 25 ml of 0.1 N hydrochloric acid and stir occasionally over a period of 30 min. Vacuum filter the slurry through a medium porosity fritted-glass crucible or small funnel, using a fine stream of water from a wash bottle to aid quantitative transfer of the sample. Wash the sample with distilled water (300 ml usually sufficient) until the filtrate is free from chloride determined by silver nitrate test (NOTE 2).
    [Show full text]
  • Critical Factors in Determining Fiber in Feeds and Forages
    Critical Factors in Determining Fiber in Feeds and Forages AAFCO’s Laboratory Methods and Services Committee Fiber Best Practices Working Group January 2017 Introduction From the nutritional perspective, fiber is defined as the hydrolytically indigestible partially fermentable components of feed. Chemically, these components are a variable mixture of cellulose, hemicelluloses, lignin, and soluble dietary fibers (e.g., pectins). Nutritionists need a practical and routine means of measuring fiber and must compromise between the theoretical concept of fiber and the utility of using chemical solubility to isolate and measure fractions that closely resemble the nutritionally defined fraction called fiber. Because there is no guarantee of direct correspondence between chemical solubility and nutritional availability, in reality, fiber is defined by the method used to isolate it. The actual definition of fiber becomes method- dependent, which explains why there are so many different fiber analyses (crude fiber, acid detergent fiber, neutral detergent fiber, amylase-neutral detergent fiber, total dietary fiber, etc.). The abundance of fiber methods is complicated further by the modifications of each method that are commonly used. Sometimes these modifications are developed to meet the specific needs of a particular application or research project. Other times modifications are made for convenience or to increase the speed of fiber analysis. Because fiber is defined by the method used to isolate it, it should be clear that method modifications have the potential to result in a fiber value that is not comparable with the parent method and cannot be reported using the same test name. The sensitivity of fiber values to a method suggests that fiber methods must be followed exactly to be reproducible.
    [Show full text]
  • Autoclave and Ultra-Sonication Treatments of Oil Palm Empty Fruit Bunch fibers for Cellulose Extraction and Its Polypropylene Composite Properties
    Journal of Cleaner Production 126 (2016) 686e697 Contents lists available at ScienceDirect Journal of Cleaner Production journal homepage: www.elsevier.com/locate/jclepro Autoclave and ultra-sonication treatments of oil palm empty fruit bunch fibers for cellulose extraction and its polypropylene composite properties * M.A. Abdullah a, , M.S. Nazir b, 1, M.R. Raza c, B.A. Wahjoedi d, A.W. Yussof e a Institute of Marine Biotechnology, Universiti Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia b Department of Chemical Engineering, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia c Department of Mechanical Engineering, COMSATS Institute of Information Technology, Lahore 57000, Punjab, Pakistan d Department of Fundamental and Applied Sciences, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia e FELCRA Nasaruddin, Oil Palm Mill, KM37, JalanTronoh, 32600 Bota, Perak, Malaysia article info abstract Article history: Accumulation of residual plastics and the biomass wastes from agricultural sectors are causing serious Received 13 July 2015 global environmental problems if not addressed effectively. Cellulose with polypropylene as bio- Received in revised form composite material is an elegant strategy for value-added utilization of wastes. In this study, green 18 March 2016 isolation of cellulose from oil palm empty fruit bunches by autoclave-based and ultrasonication pre- Accepted 19 March 2016 treatments were developed to replace the non-green chlorite method. Ultrasonic treatment with Available online 12 April 2016 hydrogen peroxide yielded 49% cellulose with 91.3% a-cellulose content and 68.7% crystallinity, as compared to 64% cellulose with autoclave treatment. Based on field emission scanning electron micro- Keywords: fi fi Biomass utilization scope, the ultrasonic and the autoclave-treated bers showed complete separation of cellulose brils, Cellulose extraction with punctures and pores on the surface.
    [Show full text]
  • Moisture Is Removed from the Sample by Distillation As an Azeotrope with Benzene
    Feedstuffs Analysis G-14-1 MOISTURE (Azeotropic Distillation) PRINCIPLE Moisture is removed from the sample by distillation as an azeotrope with benzene. The water is collected in a suitable trap and its volume is measured at a known temperature. SCOPE This method is applicable to corn gluten feed, corn gluten meal and related feed products from corn (Note 1). SPECIAL APPARATUS Recommended equipment for azeotropic distillation is available from several sources (see sketch). 1. Distilling Flask: KIMAX or PYREX short neck, flat bottom boiling flask, 500 mL capacity, with standard-paper 24/40 neck (e.g., Cat. No. F4020- 500 or F4022-500, Baxter Scientific Products, 1430 Waukegan Rd., McGaw Park, Illinois 60085) 2. Moisture Trap: Bidwell & Sterling, PYREX, 5 mL capacity, with 0.1 mL graduations (Note 2), and with standard-taper 24/40 joints for connecting the distilling flask and reflux condenser (e.g., Cat. No. 7705, Ace Glass Incorporated, P.O. Box 688, 1430 Northwest Blvd., Vineland, New Jersey 08360) 3. Condenser: PYREX, West-type with drip tip and 40 cm jacket. The bottom end has a standard-taper 24/40 joint for attaching the moisture trap; the upper end extends 3 inches beyond the jacket to allow a test tube closure during distillation. 4. Hot Plate-Stirrer: The unit should provide a maximum temperature (plate surface) of 800 °F and a stirring range of 250 to 1000 rpm. Stepless individual control of both temperature and stirring rate is necessary. (e.g., Analytical Methods of the Member Companies of the Corn Refiners Association, Inc. Accepted 5-7-56 Revised 4-18-89 Feedstuffs Analysis G-14-2 MOISTURE (Azeotropic Distillation) ⎯ continued Cat.
    [Show full text]