DOCSLIB.ORG

Lab Synergy 2010 Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Lab Synergy 2010 Catalog Titration, Electrochemistry, Meters Pharmaceuticals, Food, General Laboratory Kjeldahl, Digestion, Distillation, Extraction Food, Environmental Grinding, Particle Size, Milling Sample Preparation, General Laboratory Dissolved Oxygen, Conductivity, pH, ORP, Photometry Environmental, Wastewater Contents Page 1-12 Featuring a selection of titration and electrochemistry instruments for pharmaceutical, food/beverage and general laboratory use. Page 13-18 Products offering a range for Kjeldahl, digestion, distillation and extraction testing for food and environmental use. Page 19-24 Instruments for precision grinding, milling and particle size for general laboratory and civil engineering use. Page 25-36 Rugged field instrumentation for dissolved oxygen, conductivity, pH, ORP and photometry testing for environmental and wastewater use. Manual Titration | Manual Dispensing | Simple Titrator | Compact Titrator Food, Pharmaceuticals, General Laboratory Manual Titrator - Titronic® basic Intended to replace conventional glass burettes and bottle top titrators in any lab, for any application. Advantages include a motor driven piston burette, a digital readout of the volume dispensed, automatic refilling for safety and ease of use and an integrated magnetic stirrer. Manual Titrator/Dispenser - Titronic® universal For manual titrations and repetitive dispensing with the highest precision. Manual titrations with pre-titration, incremental addition and routine dispensing are all made easy with this titrator/dispenser. Available in 20 or 50ml versions with integrated magnetic stirrer. Simple Titrator - TitroLine® easy Perfect for routine applications including pH and chloride titrations. Titrator comes complete with magnetic stirrer, dosing burette, and electrode. Result calculations and calibrations are done automatically. Compact Titrator - TitroLine® alpha plus A traditional titration system with online curve display, interchangeable burettes, a full methods library, calculation of all results and the possibility to add software for PC control, data collection and SI Analytics Technical Support Center 1-800-691-7954 automation. Ordering Information VWR Cat. Description Price 89004-542 Titronic® basic M2 115V $ 1,530.00 13502-814 Titronic® universal M2/20-115V $ 2,455.00 13502-816 Titronic® universal M2/50-115V $ 2,455.00 14221-490 TitroLine® easy M2 115V $ 4,495.00 89004-544 TitroLine® KF Vol 115V $ 5,995.00 97040-140 TitroLine® KF trace, Module 1 $ 7,225.00 97040-142 TitroLine® KF trace, Module 2 $ 8,599.00 97040-144 TitroLine® KF trace, Module 3 $ 7,225.00 97040-146 TitroLine® KF trace, Module 4 $ 8,599.00 14224-544 TitroLine® alpha plus $ 10,550.00 1 Volumetric Karl Fischer | Coulometric Karl Fischer Food, Pharmaceuticals, General Laboratory Versatile and flexible solutions for Karl Fisher titration. Volumetric Karl Fischer - TitroLine® KF Everything needed to perform a Karl Fischer titration (water content) is included in this package. Methods include sample titration, titre water, titre liquid standard, titre tartrate dihydrate, blank value oven and blank value solvent. All widely used titration parameters are possible plus the ability to customize. Any KF solvent can be used and a variable pole voltage assures precision. Solvent and waste are removed by the pump and stirrer to eliminate required handling. Results may be calculated in %, ppm, mg, mg/ml, mg/pc and ml. Statistics including average and standard deviation can be calculated. Automatic transfer of weights is possible via the RS232 port. An external keyboard can also be attached for simple operation, and a printer connection for documentation. Applications support and method protocols are available. Coulometric Karl Fischer - TitroLine® KF trace Titroline KF trace... Karl Fischer titrations made easy. With the new Titroline KF trace, coulometric water determination according to Karl Fischer, you cannot go wrong: The TitroLine® KF trace is the ideal instrument for determining even the smallest water content in your samples. The coulometric determination of water does not require a titrant standardization, making it even easier to use compared to the volumetric KF titrator TitroLine® KF. Both Karl Fischer units have a large display and intuitive user interface that walks you through every step. The pre-parameterized methods are easily recalled to simplify the work process. Ordering Information VWR Cat. Description Price VWR Cat. Description Price 13502-842 Replacement dosing unit, 20 ml $ 311.00 13502-850 KF electrode $ 268.00 13502-844 Replacement dosing unit, 50 ml $ 351.00 13502-852 KF cell 150 ml $ 1,243.00 13502-882 Printer w/cable $ 810.00 13502-854 KF cell 200 ml $ 1,120.00 13502-830 Titration tip with hose $ 38.00 14224-558 Exchangeable burette 5 ml $ 1,150.00 13502-996 Titration stand rod $ 18.00 14224-560 Exchangeable burette 10 ml $ 1,100.00 13502-994 Electron/Titration tip holder $ 23.00 14224-562 Exchangeable burette 20 ml $ 1,100.00 13502-998 Manual push button $ 79.00 13502-914 Combination pH electrode $ 189.00 13502-934 Tubing 1 meter $ 17.00 13502-916 Combination AG electrode $ 343.00 13502-818 Clear reagent reservoir, 1 L $ 59.00 13502-918 Combination redox electrode $ 261.00 13502-822 Bottle top adapter with GL45 finish $ 103.00 13502-920 Electrode cable $ 57.00 13502-872 Adapter for solvent and waste bottle $ 85.00 2 Routine pH | Conductivity Pharmaceuticals, Food, General Laboratory All SCHOTT® Instruments offer: Real time clock always reflects correct date and value. CalClock - This unique combination of sensor evaluation and calibration timer monitors all calibration relevant parameters, plus warns of any errors. Advanced measuring algorithm is specially adapted to SCHOTT® Instruments pH electrodes. This function increases the pH calibration, measurement precision and saves time. Full IQ, OQ and PQ documentation is available for all instruments. Lab 850 - pH Meter This starting model is perfectly suitable for all Good Laboratory Practice demands: 3-point calibration Stores 800 data sets with time and identification. RS232 transfers data sets and calibration protocol to a PC. Lab 860 - pH Meter/Lab 960 - Conductivity Meter Direct data transmission - Fast documentation, whether using the conventional RS232 method or the USB - both interfaces are integrated with no adapter required. 5-point calibration of the Lab 860 is ideal for high precision results required by pharmaceutical customers. Lab 870 - pH Meter/ Lab 970 - Conductivity Meter Automatic electrode recognition- The instrument automatically recognizes the electrode. Data transfer made easy- The Lab 870 and Lab 970 transfers the data directly to a PC or printer via USB or RS232. SI Analytics Technical Support Center 1-800-691-7954 Ordering Information VWR Cat. Description Price 97042-304 Lab 850- Laboratory pH Meter $ 459.85 97042-316 Lab 860- Laboratory pH Meter $ 599.81 97042-330 Lab 960- Laboratory Conductivity Meter $ 799.74 3 Routine pH | Conductivity Pharmaceuticals, Food, General Laboratory Lab 800 Series - pH/ISE Decision Tree Lab 900 Series - Conductivity Decision Tree Ordering Information VWR Cat. Description Price VWR Cat. Description Price 97042-306 Lab 850 BNC $ 539.82 97042-322 Lab 860 BNC Set/IoLine A170 $ 899.71 97042-308 Lab 850 BNC Set/BlueLine 56 pH $ 729.76 97042-324 Lab 860BNC Set/BlueLine 26 pH $ 849.72 97042-310 Lab 850 BNC Set/BlueLine 15 pH $ 609.81 97042-326 Lab 860 BNC Set/BlueLine 56 pH $ 819.74 97042-312 Lab 850 BNC Set/BlueLine 25 pH $ 579.81 97042-328 Lab 870 BNC Set/BlueLine 15 pH ID $ 899.71 97042-314 Lab 850 BNC Set/BlueLine 26 pH $ 619.81 97042-332 Lab 960 Set/LF413T $ 1,149.63 97042-318 Lab 860 BNC $ 699.77 97042-334 Lab 970 Set/LF413 TID $ 1,249.59 97042-320 Lab 860 BNC Set/BlueLine 15 pH $ 959.69 4 Advanced Multi-parameter Pharmaceuticals, Food, General Laboratory SCHOTT® Instruments ProLab 1000 and 2000 feature: Direct data transmission- Fast documentation whether using RS232 or USB - both PC interfaces easily transfer 1500 data sets with date and inventory number. Automatic user recognition - User recognition with electronic ID and wireless transponder technology. Wireless electrode ID automatically transfers the unique electrode identification to the instrument, no cable needed. ProLab 1000 - pH/ISE and dead stop measurement High precision measurement with many special features. The automatic calibration, up to 5 points, and buffer recognition from more than 16 selectable buffer sets guarantee trustworthy results. Dead stop function expands the options for manual titration applications to include wine and food. ProLab 2000 - Multi-Parameter Measure pH, ISE, conductivity and D.O. using this single instrument. Up to three parameters can be done simultaneously with a range from -2.000 to +20.000 and an accuracy of 0.003 pH. The ProLab 2000 is well suited for manifold applications in research and development. The automatic pH and ISE calibration at up to 5 points guarantee trustworthy measurement results. The included galvanic D.O. sensor and multi-pole conductivity cell expands the application options. SI Analytics Technical Support Center 1-800-691-7954 Ordering Information VWR Cat. Description Price 97042-336 ProLab 1000 $ 1,049.66 97042-338 ProLab 2000 $ 1,259.59 5 Advanced Multi-parameter Pharmaceuticals, Food, General Laboratory ProLab 1000 & ProLab 2000 - Decision Tree ProLab 1000 ProLab 2000 Ordering Information VWR Cat. Description Price VWR Cat. Description Price 97042-248 ProLab 1000 BNC Set $ 1,349.56 97042-342 ProLab 2000 BNC Set/pH-Ox $ 2,019.35 97042-340 ProLab 2000 BNC Set/pH-cond $ 2,049.34 97042-344 ProLab 2000 BNC Set/pH-cond-Ox $ 2,249.27 6 Multi-parameter | Research Pharmaceuticals, Food, General Laboratory SCHOTT® Instruments ProLab 3000 pH/ISE Meter and ProLab 4000 pH/ISE/Cond Meter features: Windows®* like software menu can be operated just like a PC using the menu keys or the mouse. Mouse, barcode reader and external keyboard can be operated at the same time. The USB interface is expandable by using a multiple socket hub. Flexible and brilliant color graphic display- The backlit high resolution display enables good readability even from a side angle and a distance up to 10 feet.
Load more

Recommended publications
  • Thomas Brand and Labforce Products
    Thomas Brand and labForce Products thomassci.com 800.345.2100 [email protected] For Latin Ameríca Thomas Scientic, LLC Family of Companies Phone: +1 786.314.7142 Address: MIAMI, FL 33182 1800 NW 135 Ave # 104 Email: [email protected] Table of Contents Equipment Supplies Balances .......................................................................... Pages 3 - 4 Bottles ............................................................................ Pages 9 -12 Bottle Top Filters ................................................................Page 12 Dry Baths .................................................................................Page 4 Jars .........................................................................................Page 12 Hot Plates/Hot Plate Stirrers .........................................Page 4-5 Jugs ....................................................................................... Page 13 Lab Lifts ...................................................................................Page 5 Microscope Slides/Cover Glass ..............................Page 13 - 14 Petri Dishes ..........................................................................Page 14 Laboratory Seating ...............................................................Page 6 Pipet Tips...................................................................... Page 14 - 15 Microscopes .......................................................................Page 6-7 Plates .....................................................................................Page
    [Show full text]
  • Spex Sampleprep Handbook 20
    HANDBOOK TIME LINE READ THE SPEX 1956-1983 SPEAKER ONLINE! Visit www.spexspeaker.com to read our unique trade journal that was published between 1956-1983. 1980s 1990s 2000s 2014 2 SPEX SamplePrep, LLC has been providing superior sample preparation equipment and supplies since 1954. Our mission is to provide quality products backed by exceptional service and expertise. Our equipment is used to prepare samples for a wide range of analytical technologies including XRF, ICP, GC-MS and PCR. Much of our equipment is also used for cutting-edge research in pharmaceuticals, superconductors, polymers, forensics, genetics and biotechnology. Our Products • Freezer/Mill® – Uniquely designed to • Katanax® Electric Fusion Fluxers – cryogenically grind samples normally Automated electric fluxers for borate fusions considered difficult or impossible to pulverize of cement, ores, ceramics and other materials at ambient temperature. for analysis by XRF, AA, ICP and wet chemistry. • Geno/Grinder® – Used for high-throughput • X-Press® – Laboratory press ideal for cell disruption and tissue homogenization. pressing sample disks for XRF, IR, and OES. • Mixer/Mill® – High-energy ball mills for • XRF Accessories – Spec-Caps® for supporting pulverizing brittle materials, mixing powders pressed disks, disposable X-Cells® and window and emulsions, mechanical alloying, and film for liquid samples, Prep-Aid® Binders and nanomilling. Grinding Aids. • Shatterbox® – Ring and puck mills used for • ShaQer - Specifically designed for preparation rapidly pulverizing brittle materials such as of samples using the QuEChERS method. cement, slag, ores, ceramics, etc. Our Customers For the past six decades, SPEX SamplePrep’s customers have relied on our unique knowledge and expertise to select the proper products for their sample preparation needs.
    [Show full text]
  • General Catalogue
    GENERAL CATALOGUE Sign up for MILLING | SIEVING | ASSISTING our newsletters! You will occasionally receive exclusive information on seminars/webinars, applications and product news. Subscribe now: The new Mixer Mill MM 500 www.retsch.com/newsletter (You may unsubscribe any time) 99.001.0010/E | Retsch GmbH Retsch-Allee 1-5 42781 Haan Germany Phone +49(0)2104/2333-100 Fax +49(0)2104/2333-199 E-Mail [email protected] Internet www.retsch.com Subject to technical modification and errors. GmbH Retsch © 2019 by Copyright MILLING | SIEVING | ASSISTING | SIEVING | MILLING INDEX 131 Model Description Page Model Description Page A P AS 200 basic Vibratory Sieve Shaker 92 PM 100 Planetary Ball Mill 60 AS 200 control Vibratory Sieve Shaker 93 PM 100 CM Planetary Ball Mill 60 AS 200 digit cA Vibratory Sieve Shaker 92 PM 200 Planetary Ball Mill 60 AS 200 jet Air Jet Sieving Machine 102 PM 400 Planetary Ball Mill 60 AS 200 tap Tap Sieve Shaker 100 PM 400 MA Planetary Ball Mill 60 AS 300 control Vibratory Sieve Shaker 94 PP 25 Pellet Press 128 AS 400 control Horizontal Sieve Shaker 98 PP 35 Pellet Press 128 AS 450 basic Vibratory Sieve Shaker 95 PP 40 Pellet Press 128 AS 450 control Vibratory Sieve Shaker 95 PT 100 Sample Divider 122 B PT 200 Sample Divider 123 BB 50 Jaw Crusher 12 PT 300 Sample Divider 124 BB 100 Jaw Crusher 13 PT 600 Sample Divider 124 BB 200 Jaw Crusher 13 R BB 250 Jaw Crusher 14 RM 200 Mortar Grinder 40 BB 300 Jaw Crusher 13 RS 200 Vibratory Disc Mill 44 BB 400 Jaw Crusher 14 RS 300 Vibratory Disc Mill 45 BB 500 Jaw Crusher 15 RT 6.5
    [Show full text]
  • 695 Subpart R—Special Industries
    Occupational Safety and Health Admin., Labor § 1910.255 adequate guards, in accordance with the suspended equipment in the event § 1910.219 of this part. of trolley failure. (5) Shields. The hazard of flying (4) Switch guards. All initiating sparks shall be, wherever practical, switches, including retraction and dual eliminated by installing a shield guard schedule switches, located on the port- of safety glass or suitable fire-resistant able welding gun shall be equipped with plastic at the point of operation. Addi- suitable guards capable of preventing tional shields or curtains shall be in- accidental initiation through contact stalled as necessary to protect passing with fixturing, operator’s clothing, etc. persons from flying sparks. (See Initiating switch voltage shall not ex- § 1910.252(b)(2)(i)(C) of this part.) ceed 24 volts. (6) Foot switches. All foot switches (5) Moving holder. The movable hold- shall be guarded to prevent accidental er, where it enters the gun frame, shall operation of the machine. have sufficient clearance to prevent (7) Stop buttons. Two or more safety the shearing of fingers carelessly emergency stop buttons shall be pro- placed on the operating movable hold- vided on all special multispot welding er. machines, including 2-post and 4-post (6) Grounding. The secondary and weld presses. case of all portable welding trans- (8) Safety pins. On large machines, formers shall be grounded. Secondary four safety pins with plugs and recep- grounding may be by center tapped sec- tacles (one in each corner) shall be pro- ondary or by a center tapped grounding vided so that when safety pins are re- reactor connected across the sec- moved and inserted in the ram or plat- ondary.
    [Show full text]
  • Biomass Pretreatment with the Szego Mill™ for Bioethanol and Biogas Production
    processes Article Biomass Pretreatment with the Szego Mill™ for Bioethanol and Biogas Production Merlin Raud 1,* , Kaja Orupõld 2 , Lisandra Rocha-Meneses 1 , Vahur Rooni 1, Olev Träss 3 and Timo Kikas 1 1 Institute of Technology, Estonian University of Life Sciences, 56 Kreutzwaldi Str., 51014 Tartu, Estonia; [email protected] (L.R.-M.); [email protected] (V.R.); [email protected] (T.K.) 2 Institute of Agricultural and Environmental Sciences, Estonian University of Life Sciences, 5 Kreutzwaldi Str., 51006 Tartu, Estonia; [email protected] 3 Department of Chemical Engineering and Applied Chemistry, University of Toronto, Toronto, ON M5S 3ES, Canada; [email protected] * Correspondence: [email protected] Received: 18 September 2020; Accepted: 19 October 2020; Published: 21 October 2020 Abstract: Results from an investigation of the mechanical size reduction with the Szego Mill™ as a pretreatment method for lignocellulosic biomass are presented. Pretreatment is a highly expensive and energy-consuming step in lignocellulosic biomass processing. Therefore, it is vital to study and optimize different pretreatment methods to find a most efficient production process. The biomass was milled with the Szego Mill™ using three different approaches: dry milling, wet milling and for the first time nitrogen assisted wet milling was tested. Bioethanol and biogas production were studied, but also fibre analysis and SEM (scanning electron microscope) analysis were carried out to characterize the effect of different milling approaches. In addition, two different process flows were used to evaluate the efficiency of downstream processing steps. The results show that pretreatment 1 of barely straw with the Szego Mill™ enabled obtaining glucose concentrations of up to 7 g L− in the hydrolysis mixture, which yields at hydrolysis efficiency of 18%.
    [Show full text]
  • Lab Startup Checklist
    Lab Startup Checklist CHEMICALS/REAGENTS Bottletop Burette HOODS Repeater Pipettor Buffers Powder Containment Hood Pipette Filler Standards Water TEMPERATURE CONTROL Applicable LabChem Product SAMPLE PREP Chiller Applicable RICCA Product Mini Centrifuge Water Baths Large Centrifuge Plug in Temperature Control Unit BALANCES AND WEIGHT Open Air Shaker High Dynamic Temperature Orbital Shaker Analytical Balance Control Circulator Vortex Mixer Micro Balance Temperature Sensor Hotplate/Stirrer Precision Balance Oil Baths Homogenizer/Overhead Stirrer Bench Scale Heating Mantle Dry Bath Floor Scale Dewar Flasks Rotor Mill Shipping Scale Thermometer Jaw Crusher Retail Scale Infrared Thermometer Cutting Mill Counting Scale Knife Mill ASTM Weights and Weight Sets Mortar Grinder LAB SUPPLIES OIML Weights and Weight Sets Sieve Shaker Disposable Gloves Sieves Lab Coats WATER ANALYSIS Tube Rotator Shoe Covers pH Meter Thermal Mixer Other PPE ORD Meter Thermal Cycler Various Tubes Conductivity Meter Microwave Digestion System Funnels TDS Meter Unguator Transfer Pipettes Electrodes Dewar Flasks Storage Racks Buffers Weigh Boats GLASSWARE Spatulas Scoops MOISTURE ANALYZERS Beakers Ohaus Moisture Analyzers Flasks Stirring Rods Tubes Tubing Cutters LIQUID HANDLING Bottles Distillation Apparatus Electronic Motorized Single Channel Extraction Apparatus Name Pipettor Glassware Startup Kit Company Multi-Channel Pipettor Phone Autoclavable Multi-Channel Pipettor Email Single Channel Fixed Pipettor REACTION Autoclavable Single Channel Fixed Pipettor Rotary Evaporator and Supporting Pipette Tips Equipment Syringe Tips Turnkey Ready Reactor™ Bottletop Dispenser encoresci.com | 800.454.2304 | [email protected].
    [Show full text]
  • Effect of Alkaline Pretreatments on the Enzymatic Hydrolysis of Wheat Straw
    Effect of alkaline pretreatments on the enzymatic hydrolysis of wheat straw N. Kontogianni, E.M. Barampouti, S. Mai, D. Malamis, M. Loizidou* National Technical University of Athens, School of Chemical Engineering, Unit of Environmental Science & Technology, 9 Iroon Polytechniou Str., Zographou Campus, GR-15780 Athens, Greece Keywords: alkaline peroxide, alkaline pretreatments, CellicCTec2, enzymatic hydrolysis, wheat straw Introduction Lignocellulosic materials are mainly composed of cellulose, hemicellulose and lignin. Lignin is considered to be the major barrier to the enzymatic hydrolysis of cellulose towards the production of fermentable sugars. Therefore, removing lignin from the lignocellulosic raw materials is favorable to reducing the recalcitrance of lignocellulose for enzymatic attack. For this purpose, various pretreatment technologies have been developed to improve the removal of lignin from the compact structure of plant cell walls and enhance the digestibility of cellulose by enzymes. Wheat straw is an abundant agriculture residue worldwide. In this work, wheat straw was firstly alkaline pretreated under selected chemicals and then subsequently it was enzymatically hydrolysed. Materials and Methods Wheat straw (WS) was obtained from Aspropyrgos province, Greece. The wheat straw was milled (FRITSCH Cutting mill Pulverisette 15) to 1 mm. The milled straw mainly composed of 33.8% cellulose, 45.1% hemicellulose, 16.4% lignin (15.4% Klason lignin and 1.0% acid-soluble lignin), and 4.7% ash. All chemical reagents were of analytical grade and used without further purification. The commercial enzymatic formulation CelliCTec2 was kindly donated by Novozymes (Denmark). Total cellulase activity (FPU) was measured against filter paper by the standard IUPAC method and found to be 223 FPU/mL.
    [Show full text]
  • PET Plus Viscometer User Manual
    Part No. 01/3514 November 2014 PET Plus Viscometer including Polymer Dryer and Polymer Grinder User Manual PET Plus User Manual 1 WARRANTY This instrument is warranted against defects in workmanship, material and design for one (1) year from date of delivery to the extent that AMETEK will, at its sole option, repair or replace the instrument or any part thereof which is defective, provided, however, that this warranty shall not apply to instru- ments subjected to tampering or, abuse, or exposed to highly corrosive conditions. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED AND AMETEK HEREBY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, WITHOUT LIMITA- TION, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. AMETEK SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, ANY ANTICIPATED OR LOST PROFITS. This warranty is voidable if the purchaser fails to follow any and all instructions, warnings or cautions in the instrument’s Instruction Manual. If a manufacturing defect is found, AMETEK will replace or repair the instrument or replace any defec- tive part thereof without charge; however, AMETEK’s obligation hereunder does not include the cost of transportation, which must be borne by the customer. AMETEK assumes no responsibility for dam- age in transit, and any claims for such damage should be presented to the carrier by the purchaser. TRADEMARKS AMETEK is a registered trademarks of AMETEK, Inc. LLOYD INSTRUMENTS is a trademark of AMETEK, Inc. DAVENPORT is a trademark of AMETEK, Inc. Other trademarks are the property of their respective owners.
    [Show full text]
  • Purity Tests for Modified Starches. Residue Monograph Prepared By
    Residue Monograph prepared by the meeting of the Joint FAO/WHO Expert Committee on Food Additives (JECFA), 82nd meeting 2016 Purity Tests for Modified Starches This monograph was also published in: Compendium of Food Additive Specifications. Joint FAO/WHO Expert Committee on Food Additives (JECFA), 82nd meeting 2016. FAO JECFA Monographs 19 © FAO/WHO 2016 1 of 4 PURITY TESTS FOR MODIFIED STARCHES Carboxyl groups Principle The carboxyl containing starch is equilibrated with mineral acid to convert carboxyl salts to the acid form. Cations and excess acid are removed by washing with water. The washed sample is gelatinized in water and titrated with standard alkali. NOTE: Native phosphate groups present in potato starch increase the titre found in this method (See NOTE 6). Reagents Hydrochloric Acid Solution, 0.10 N: Standardization unnecessary Sodium Hydroxide Solution, 0.10 N : Standardized Phenolphthalein Indicator, 1% Procedure If necessary, grind sample completely through a laboratory cutting mill to 20 mesh or finer, taking precautions to prevent any significant change in moisture, and mix thoroughly. Weigh accurately a sample containing not more than 0.25 milliequivalents of carboxyl (Note 1), and transfer quantitatively to a 150-ml beaker. Add 25 ml of 0.1 N hydrochloric acid and stir occasionally over a period of 30 min. Vacuum filter the slurry through a medium porosity fritted-glass crucible or small funnel, using a fine stream of water from a wash bottle to aid quantitative transfer of the sample. Wash the sample with distilled water (300 ml usually sufficient) until the filtrate is free from chloride determined by silver nitrate test (NOTE 2).
    [Show full text]
  • Critical Factors in Determining Fiber in Feeds and Forages
    Critical Factors in Determining Fiber in Feeds and Forages AAFCO’s Laboratory Methods and Services Committee Fiber Best Practices Working Group January 2017 Introduction From the nutritional perspective, fiber is defined as the hydrolytically indigestible partially fermentable components of feed. Chemically, these components are a variable mixture of cellulose, hemicelluloses, lignin, and soluble dietary fibers (e.g., pectins). Nutritionists need a practical and routine means of measuring fiber and must compromise between the theoretical concept of fiber and the utility of using chemical solubility to isolate and measure fractions that closely resemble the nutritionally defined fraction called fiber. Because there is no guarantee of direct correspondence between chemical solubility and nutritional availability, in reality, fiber is defined by the method used to isolate it. The actual definition of fiber becomes method- dependent, which explains why there are so many different fiber analyses (crude fiber, acid detergent fiber, neutral detergent fiber, amylase-neutral detergent fiber, total dietary fiber, etc.). The abundance of fiber methods is complicated further by the modifications of each method that are commonly used. Sometimes these modifications are developed to meet the specific needs of a particular application or research project. Other times modifications are made for convenience or to increase the speed of fiber analysis. Because fiber is defined by the method used to isolate it, it should be clear that method modifications have the potential to result in a fiber value that is not comparable with the parent method and cannot be reported using the same test name. The sensitivity of fiber values to a method suggests that fiber methods must be followed exactly to be reproducible.
    [Show full text]
  • Autoclave and Ultra-Sonication Treatments of Oil Palm Empty Fruit Bunch fibers for Cellulose Extraction and Its Polypropylene Composite Properties
    Journal of Cleaner Production 126 (2016) 686e697 Contents lists available at ScienceDirect Journal of Cleaner Production journal homepage: www.elsevier.com/locate/jclepro Autoclave and ultra-sonication treatments of oil palm empty fruit bunch fibers for cellulose extraction and its polypropylene composite properties * M.A. Abdullah a, , M.S. Nazir b, 1, M.R. Raza c, B.A. Wahjoedi d, A.W. Yussof e a Institute of Marine Biotechnology, Universiti Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia b Department of Chemical Engineering, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia c Department of Mechanical Engineering, COMSATS Institute of Information Technology, Lahore 57000, Punjab, Pakistan d Department of Fundamental and Applied Sciences, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia e FELCRA Nasaruddin, Oil Palm Mill, KM37, JalanTronoh, 32600 Bota, Perak, Malaysia article info abstract Article history: Accumulation of residual plastics and the biomass wastes from agricultural sectors are causing serious Received 13 July 2015 global environmental problems if not addressed effectively. Cellulose with polypropylene as bio- Received in revised form composite material is an elegant strategy for value-added utilization of wastes. In this study, green 18 March 2016 isolation of cellulose from oil palm empty fruit bunches by autoclave-based and ultrasonication pre- Accepted 19 March 2016 treatments were developed to replace the non-green chlorite method. Ultrasonic treatment with Available online 12 April 2016 hydrogen peroxide yielded 49% cellulose with 91.3% a-cellulose content and 68.7% crystallinity, as compared to 64% cellulose with autoclave treatment. Based on field emission scanning electron micro- Keywords: fi fi Biomass utilization scope, the ultrasonic and the autoclave-treated bers showed complete separation of cellulose brils, Cellulose extraction with punctures and pores on the surface.
    [Show full text]
  • Moisture Is Removed from the Sample by Distillation As an Azeotrope with Benzene
    Feedstuffs Analysis G-14-1 MOISTURE (Azeotropic Distillation) PRINCIPLE Moisture is removed from the sample by distillation as an azeotrope with benzene. The water is collected in a suitable trap and its volume is measured at a known temperature. SCOPE This method is applicable to corn gluten feed, corn gluten meal and related feed products from corn (Note 1). SPECIAL APPARATUS Recommended equipment for azeotropic distillation is available from several sources (see sketch). 1. Distilling Flask: KIMAX or PYREX short neck, flat bottom boiling flask, 500 mL capacity, with standard-paper 24/40 neck (e.g., Cat. No. F4020- 500 or F4022-500, Baxter Scientific Products, 1430 Waukegan Rd., McGaw Park, Illinois 60085) 2. Moisture Trap: Bidwell & Sterling, PYREX, 5 mL capacity, with 0.1 mL graduations (Note 2), and with standard-taper 24/40 joints for connecting the distilling flask and reflux condenser (e.g., Cat. No. 7705, Ace Glass Incorporated, P.O. Box 688, 1430 Northwest Blvd., Vineland, New Jersey 08360) 3. Condenser: PYREX, West-type with drip tip and 40 cm jacket. The bottom end has a standard-taper 24/40 joint for attaching the moisture trap; the upper end extends 3 inches beyond the jacket to allow a test tube closure during distillation. 4. Hot Plate-Stirrer: The unit should provide a maximum temperature (plate surface) of 800 °F and a stirring range of 250 to 1000 rpm. Stepless individual control of both temperature and stirring rate is necessary. (e.g., Analytical Methods of the Member Companies of the Corn Refiners Association, Inc. Accepted 5-7-56 Revised 4-18-89 Feedstuffs Analysis G-14-2 MOISTURE (Azeotropic Distillation) ⎯ continued Cat.
    [Show full text]