DOCSLIB.ORG

Microscribe Compatible Software Solutions

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Microscribe Compatible Software Solutions MicroScribe Compatible Software Solutions The following software is compatible with all MicroScribe models (MicroScribe i and M series) CAD Software Manufacturer Support Plug-in Platform Rating Creator AutoCAD - MUS - PC * AutoCAD Mechanical - MUS - PC * AutoStudio - MUS - PC * BuildIT Desktop BuildIT Software & Solutions Direct - PC * KeyCreator (Cadkey) Kubotic MUS - PC * SolidEdge Siemens MUS - PC * SOLIDWORKS Dassault Systemes Plug-in Point2CAD PC *** SOLIDWORKS Dassault Systemes Plug-in Revworks PC *** TopSolid TopSolid MUS - PC * Unigraphics - MUS - PC * CAD/CAM Software Manufacturer Support Plug-in Platform Rating Creator Alphacam Vero Software Direct - PC * BobCAD BobCAD-CAM, Inc. MUS - PC * Delcam PowerSHAPE - Direct - PC * DeskProtoCAM DeskProto Plug-in DeskProto PC * HandyCut Picasoft Direct - PC * MasterCam MasterCam MUS - PC ** SURFCAM Surfware Inc. Direct - PC * Rating: * Reported to work by Revware (MicroScribe Manufacturer) ** Confirmed to work by GoMeasure3D *** Recommended solution by GoMeasure3D PHONE (434) 946-9125 | EMAIL [email protected] | WEB www.gomeasure3d.com GRAPHIC ImaGING Software Manufacturer Support Plug-in Platform Rating Creator 3D Studio Max Autodesk MUS GHOST 3D PC * Alias Studio Autodesk MUS - PC * Pindot Scribbler Freedom Designs Direct Revware PC ** MODELING Software Manufacturer Support Plug-in Platform Rating Creator Form Z - Direct - PC/MAC * Mayka PicaSoft Direct - PC/MAC * Rhino Robert McNeel & Associates Direct - PC *** Rhino Robert McNeel & Associates Plug-in Dino PC ** METROLOGY Software Manufacturer Support Plug-in Platform Rating Creator CAPPS DMIS Applied Automation Technologies Direct - PC * CMM Manager Nikon Metrology Direct - PC * Compare2CAD 3D Infotech Direct - PC *** Delcam PowerINSPECT - Direct - PC * MobiGage Titansan Engineering Direct - PC *** Rational DMIS External-Array Software, Inc. Direct - PC * Verisurf Verisurf Software, Inc. Direct - PC ** Rating: * Reported to work by Revware (MicroScribe Manufacturer) ** Confirmed to work by GoMeasure3D *** Recommended solution by GoMeasure3D PHONE (434) 946-9125 | EMAIL [email protected] | WEB www.gomeasure3d.com SCANNING SOFTWARE Software Manufacturer Support Plug-in Platform Rating Creator HandyScan Picasoft Direct - PC * Measure2CAD 3D Infotech Direct - PC *** MicroScan Tools - Direct - PC ** ScanTools Patrick Gutbil Direct - PC ** SCIENTIFIC MEASUREMENT Software Manufacturer Support Plug-in Platform Rating Creator 3D-ID FSU, NCSU MUS - PC * 3Skull Mercyhurst Archaeological Direct - PC * Institute Excel Spreadsheet Microsoft MUS - PC/MAC *** Mathmatica Wolfram Plug-in - PC * MatLab MathWorks Plug-in - PC * MeshLab University of Pisa/Sourceforge Plug-in Revware PC ** MorphoJ University of Manchester File University of PC * Manchester NOTE Microsoft MUS - PC *** SHOE Software Manufacturer Support Plug-in Platform Rating Creator Crispin Shoemaker - Direct - PC * Shoemaster CSM3D International, LTD. Direct - PC * Rating: * Reported to work by Revware (MicroScribe Manufacturer) ** Confirmed to work by GoMeasure3D *** Recommended solution by GoMeasure3D PHONE (434) 946-9125 | EMAIL [email protected] | WEB www.gomeasure3d.com TUBE Software Manufacturer Support Plug-in Platform Rating Creator 3DTubeSoft PreciTrack3D Direct - PC * TezetCAD TeZet Technik AG Direct - PC *** Rating: * Reported to work by Revware (MicroScribe Manufacturer) ** Confirmed to work by GoMeasure3D *** Recommended solution by GoMeasure3D PHONE (434) 946-9125 | EMAIL [email protected] | WEB www.gomeasure3d.com .
Load more

Recommended publications
  • CAD/CAM Selection for Small Manufacturing Companies
    CAD/CAM SELECTION FOR SMALL MANUFACTURING COMPANIES By Tim Mercer A Research Paper Submitted in Partial Fulfillment of the Requirements for the Master of Science Degree in Management Technology Approved for Completion of 3 Semester Credits INMGT 735 Research Advisor The Graduate College University of Wisconsin May 2000 The Graduate School University of Wisconsin - Stout Menomonie, WI 54751 Abstract Mercer Timothy B. CAD/CAM Selection for Small Manufacturing Companies Master of Science in Management Technology Linards Stradins 2/2000 71 pages Publication Manual of the American Psychological Association In today's fast paced world, CAD/CAM systems have become an essential element in manufacturing companies throughout the world. Technology and communication are changing rapidly, driving business methods for organizations and requiring capitalization in order to maintain competitiveness. Knowledge prior to investing into a system is crucial in order to maximize the benefits received from changing CAD/CAM systems. The purpose of this study is to create a methodology to aid small manufacturing companies in selecting a CAD/CAM system. The objectives are to collect data on CAD/CAM systems that are available in the market today, identify important criteria in system selection, and identify company evaluation parameters. Acknowledgements Thanks to Dr. Rich Rothaupt for introducing me to CAM, survey help, and providing guidance with CAD/CAM applications. Thanks to Dr. Martha Wilson for early revisions, survey help and overall guidance. Thanks to my good friend and soon to be Dr. Linards Stradins for his patience, leadership, and wisdom. His invaluable knowledge and dedication as my advisor has helped me both personally and academically.
    [Show full text]
  • Application of Computer Aided Design (CADD) in Data Display and Integration of Numerical and Field Results — Stripa Phase 3
    PROJECT m-04 Application of Computer Aided Design (CADD) in Data Display and Integration of Numerical and Field Results — Stripa Phase 3 DE. Press SM. Halliday J.E. Gale Fracflow Consultants Inc. St.John's, Nfld., Canada December 1990 TECHNICAL REPORT An OECD/NEA International project managed by: SWEDISH NUCLEAR FUEL AND WASTE MANAGEMENT CO Division of Research and Development Mailing address: Box 5864, S-102 48 Stockholm. Telephone: 08-665 28 00 APPLICATION OF COMPUTER AIDED DESIGN (CADD) IN DATA DISPLAY AND INTEGRATION OF NUMERICAL AND FIELD RESULTS - STRIPA - PHASE III D. E. Press S. M. Halliday J.E. Gale Fracflow Consultants Inc. St. John's, Nfld., Canada December 1990 This report concerns a study which was conducted for the Stripa Project. The conclusions and viewpoints presented in the report are those of the authors and do not necessarily coincide with those of the client. A list of other reports published in this series is attached at the end of the report. Information on previous reports are available through SKB. 11 Abstract Existing CAD/CADD systems have been reviewed and the micro-computer compatible solids modelling CADD software SilverScreen was selected for use in constructing a CADD model of the Stripa site. Maps of the Stripa mine drifts, shafts, raises and stopes were digitized and used to create three- dimensional images of the north-eastern part of the mine and the SCV site. In addition, the use of CADD sub-programs to display variation in fracture geometry and hydraulic heads have been demonstrated. The database developed in this study is available as either raw digitized files, processed data files, SilverScreen script files or in DXF or IGES formats; all of which are described in this report.
    [Show full text]
  • CAD Data Exchange
    CCAADD DDaattaa EExxcchhaannggee 2255..335533 LLeeccttuurree SSeerriieess PPrrooff.. GGaarryy WWaanngg Department of Mechanical and Manufacturing Engineering The University of Manitoba 1 BBaacckkggrroouunndd Fundamental incompatibilities among entity representations Complexity of CAD/CAM systems CAD interoperability issues and problems cost automotive companies a combined $1 billion per year (Brunnermeier & Martin, 1999). 2 BBaacckkggrroouunndd (cont’d) Intra-company CAD interoperability Concurrent engineering and lean manufacturing philosophies focus on the reduction of manufacturing costs through the outsourcing of components (National Research Council, 2000). 3 IInnffoorrmmaattiioonn ttoo bbee EExxcchhaannggeedd Shape data: both geometric and topological information Non-shape data: graphics data Design data: mass property and finite element mesh data Manufacturing data: NC tool paths, tolerancing, process planning, tool design, and bill of materials (BOM). 4 IInntteerrooppeerraabbiilliittyy MMeetthhooddss Standardized CAD package Standardized Modeling Kernel Point-to-Point Translation: e.g. a Pro/ENGINEER model to a CATIA model. Neutral CAD Format: e.g. IGES (Shape-Based Format ) and STEP (Product Data-Based Format) Object-Linking Technology: Use Windows Object Linking and Embedding (OLE) technology to share model data 5 IInntteerrooppeerraabbiilliittyy MMeetthhooddss (Ibrahim Zeid, 1990) 6 CCAADD MMooddeelliinngg KKeerrnneellss Company/Application ACIS Parasolid Proprietary Autodesk/AutoCAD X CADKey Corp/CADKEY X Dassault Systems/CATIA v5 X IMS/TurboCAD X Parametric Technology Corp. / X Pro/ENGINEER SDRC / I-DEAS X SolidWorks Corp. / SolidWorks X Think3 / Thinkdesign X UGS / Unigraphics X Unigraphics / Solid Edge X Visionary Design System / IronCAD X X (Dr. David Kelly 2003) 7 CCAADD MMooddeelliinngg KKeerrnneellss (cond’t) Parent Subsidiary Modeling Product Company Kernel Parametric Granite v2 (B- Pro/ENGINEER Technology rep based) Corporation (PTC) (www.ptc.com) Dassault Proprietary CATIA v5 Systems SolidWorks Corp.
    [Show full text]
  • Accepted Drawing Formats
    Machine Technology, Inc. accepts the following data formats. Software Format File Extension SpinFire Reader 3-D SpinFire File .3d TurboCAD 3-D Studio File .3ds TurboCAD VRML Worlds Virtual Reality Modeling Language .3dv SolidEdge Viewer Pro/Engineer or SolidEdge Assembly .asm SolidWorks Viewer Pro/Engineer or SolidEdge Assembly .asm eDrawings Viewer Solid Works Assembly Template .asmdot PN View PN 4000 2-D WiCAM .c2d PN View PN 4000 3-D WiCAM .c3d TurboCAD Computer Graphics Metafile .cgm Web View CGM Computer Graphics Metafile .cgm CADKEY CADKEY Design .ckd CADKEY CADKEY Template .ckt SolidEdge Viewer SolidEdge Draft .dft ImageR/IndexR Intergraph Standard File Format .dgn TurboCAD Intergraph Standard File Format .dgn SolidWorks Viewer Pro/Engineer Drawing .drw eDrawings Viewer SolidWorks Drawing Template .drwdot AutoDesk Viewer AutoCAD Drawing Web Format .dwf TurboCAD AutoCAD Drawing Web Format .dwf AutoDesk Viewer AutoCAD Drawing .dwg eDrawings Viewer AutoCAD Drawing .dwg ImageR/IndexR AutoCAD Drawing .dwg PN View AutoCAD Drawing .dwg SolidEdge Viewer AutoCAD Drawing .dwg TurboCAD AutoCAD Drawing .dwg eDrawings Viewer AutoCAD Drawing Exchange Format .dxf ImageR/IndexR AutoCAD Drawing Exchange Format .dxf PN View AutoCAD Drawing Exchange Format .dxf SolidEdge Viewer AutoCAD Drawing Exchange Format .dxf TurboCAD AutoCAD Drawing Exchange Format .dxf eDrawings Viewer eDrawing Assembly File .easm eDrawings Viewer eDrawing File .edrw eDrawings Viewer eDrawing 1.X File .edw ImageR/IndexR Group 4 Wrap .ef eDrawings Viewer eDrawing Part File
    [Show full text]
  • MAK112E Class
    Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami 1. Introduction to Computer Aided Drawing What is CADD ? Computer-aided drawing is a technique where engineering drawings are produced with the assistance of a computer and, as with manual drawing, is only the graphical means of representing a design. Computer-aided design, however, is a technique where the attributes of the computer and those of the designer are blended together into a problem-solving team. Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami 1. Introduction to Computer Aided Drawing Two-dimensional (2D) computer drawing is the representation of an object in the single-view format which shows two of the three object dimensions or the mutiview format where each view reveals two dimensions. Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami 1. Introduction to Computer Aided Drawing Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami 1. Introduction to Computer Aided Drawing Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami 1. Introduction to Computer Aided Drawing Three-dimensional (3D) computer drawing is the coordinate format. Three dimensional computer aided drawing allows the production of geometric models of a component or product for spatial and visual analysis. Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami 1. Introduction to Computer Aided Drawing Milling Jig Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami 1.
    [Show full text]
  • Metadefender Core V4.17.3
    MetaDefender Core v4.17.3 © 2020 OPSWAT, Inc. All rights reserved. OPSWAT®, MetadefenderTM and the OPSWAT logo are trademarks of OPSWAT, Inc. All other trademarks, trade names, service marks, service names, and images mentioned and/or used herein belong to their respective owners. Table of Contents About This Guide 13 Key Features of MetaDefender Core 14 1. Quick Start with MetaDefender Core 15 1.1. Installation 15 Operating system invariant initial steps 15 Basic setup 16 1.1.1. Configuration wizard 16 1.2. License Activation 21 1.3. Process Files with MetaDefender Core 21 2. Installing or Upgrading MetaDefender Core 22 2.1. Recommended System Configuration 22 Microsoft Windows Deployments 22 Unix Based Deployments 24 Data Retention 26 Custom Engines 27 Browser Requirements for the Metadefender Core Management Console 27 2.2. Installing MetaDefender 27 Installation 27 Installation notes 27 2.2.1. Installing Metadefender Core using command line 28 2.2.2. Installing Metadefender Core using the Install Wizard 31 2.3. Upgrading MetaDefender Core 31 Upgrading from MetaDefender Core 3.x 31 Upgrading from MetaDefender Core 4.x 31 2.4. MetaDefender Core Licensing 32 2.4.1. Activating Metadefender Licenses 32 2.4.2. Checking Your Metadefender Core License 37 2.5. Performance and Load Estimation 38 What to know before reading the results: Some factors that affect performance 38 How test results are calculated 39 Test Reports 39 Performance Report - Multi-Scanning On Linux 39 Performance Report - Multi-Scanning On Windows 43 2.6. Special installation options 46 Use RAMDISK for the tempdirectory 46 3.
    [Show full text]
  • 64-Bit 64-Bit
    TableTable of ofContents Contents: : 64-Bit 3 Minor Enhancements 13-19 Windows 64 3 New Hoops Version 18.1 13 Desktop Composition Compatible 3 Added Tables To Structural Shapes 13 Improved Boolean Operations on Sheetbodies 13 Dynamic 4-9 Graphics Card Test Function 14 3D DynaHandle 4 Cutting Plane Improvements 14 Dynamic Modify Face 5 Clean Entities 15 Dynamic Modify Face Examples 5-7 Primitive Block Anchor Points 15 Dynamic Linear Array 8 Merge Option For Solid Creation 15 Dynamic Freeform Array 9 Deform Curve 16 Dynamic Transform 16 Interoperability 10-12 Improved Fastener Washer & Nut Placement 17 New IGES Translator 10 Restyle Tolerance 17 Hoops 3DX Translators 10 Improved Instance & Section Scaling 18 PDF Export Enhancements 10 Improved Auto-Label & Hole Table 18 Read Assembly Tree 11 Improved Layout Dialog 19 Autodesk Inventor 2011 12 ACIS 21 12 PTC Wildfire 5 12 Dassault Systèmes Solidworks 2010 12 Dassault Systèmes CATIA V5 R20 12 Siemens NX 7 12 2 New Features And Benefits 64-Bit64-Bit KeyCreator 2011 is the first fully 64-bit version of KeyCreator. Being 64-bit allows KeyCreator access to all of the memory resources on a PC - ignoring the 2-4 GB ceiling imposed by Windows on 32-bit programs. This Windows ceiling on 32-bit programs has effectively limited KeyCreator file size to around 200 MB for most users. That limit could be raised as high as 500 MB using special configurations or Windows 7 64-bit. KeyCreator 2011 file size is now only limited by the amount of memory available on the PC.
    [Show full text]
  • Moving from 2D to 3D CAD
    Moving From 2D to 3D CAD The productivity and business advantages Moving from 2D to 3D CAD The productivity and business advantages The primary challenges of manufacturing companies use and interpret 2D engineering drawings remains are to design better products, in shorter time an essential element of the professional literacy of frames, at lower cost. The value that manufacturers the engineer. offer their customers is continually threatened by competitors who are racing to deliver higher-quality Over the past three decades, computer-aided design products with more features at lower prices. In an (CAD) technology virtually eliminated traditional effort to better respond to market pressures, manual drafting tools and has helped manufacturers manufacturers are realigning their computer-aided realize manifold increases in productivity for design technology to better achieve their business creating engineering drawings. With lower costs and objectives. Currently the most remarkable trend in universal accessibility to computer-aided tools, most this realignment is the move from 2D CAD design all manufacturing firms have some type of CAD techniques to design processes that take advantage systems installed – a 1998 survey conducted by of 3D solid modeling. Mechanical Engineering magazine indicates that 96% of mechanical engineering professionals Why this strong move from 2D to currently use a CAD system. 3D design? This paper examines the limitations of 2D design Despite the advent of affordable processes and outlines the A 1999 study of CAD/CAM and easy-to-use 3D solid modeling engineering productivity and technology, a majority of business advantages of product practices by the Dataquest manufacturing firms still base development using 3D solid industry research firm their design processes on 2D CAD modeling technologies.
    [Show full text]
  • Designer and Manufacturer of Precision Ball Bearing Movement Solutions
    List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal Accuride International - Designer and Manufacturer of precision ball bearing movement solutions Slides for Electronic Enclosures / Rack Mounting 2807 - Electronic Enclosure, Low Profile Slide Model 2807 - 1U to 2U chassis, loads up to 100 lbs. (45 kg) per pair, 2" (51 mm) over travel, lock-out feature, latch disconnect, attached rear bracket provides up to 2" of adjustment. 2907 - Ball Bearing Electronic Enclosure Slide Model 2907 –1U to 4U chassis, loads up to 115 lbs. (52 kg) load capacity, 2" (51 mm) over travel, lock-out feature, lever disconnect, adjustable brackets included. 2907WB - Ball Bearing Electronic Enclosure Slide Model 2907WB –1U to 4U chassis, 120-lb. (55 kg) load capacity per pair, 2" (51 mm) over travel, lock-out feature, lever disconnect, brackets compatible with .63" (16 mm) and .50" (13 mm) pitch patterns and dual .63" (16 mm) patterns. 3507 - Heavy Duty, Ball Bearing Movement Model 3507 –4U to 8U chassis, loads up to 200 lbs. (91 kg) per pair, 2" (51 mm) over travel, lock-out feature, lever disconnect. Rack Mounting Accessories CC9 - Wide Cable Carrier, For Heavy-Duty Cable Installations Model CC9-1 – Use with round cable, extends to 23" (584 mm) when fully extended. For 2U and larger chassis. CC11 - Wide Cable Carrier, For Heavy-Duty Cable Installations Model CC11 – Wide are for ribbon cable, extends to 28.24" (717 mm) when fully extended Light Duty Slides 0363 - Two-Way Travel Slide Model 0363 – Two-way travel, full extension, loads up to 100 lbs.
    [Show full text]
  • Manage Engineering Data Complex Models and Simulations Yield a Torrent
    NX 8 for Design. Smarter decisions, better products. Learn more on page 11 DtopEng_banner_NXCAD_MAR2012.indd 1 3/8/12 11:02 AM April 2012 / deskeng.com Origin 8.6 Overview P.22 Direct Modeling and FEA P.24 TECHNOLOGY FOR DESIGN ENGINEERING Manage Engineering Data Complex models and simulations yield a torrent of data to seize and control. P.16 RACING AHEAD WITH CLUSTERS P.35 REVIEW: HP Z10 WORKSTATION P.38 P.40 PREPARING 3D MODELS de0412_Cover_Darlene.indd 1 3/15/12 12:20 PM Objet.indd 1 3/14/12 11:17 AM DTE_0412_Layout 1 2/28/12 4:36 PM Page 1 Data Loggers & Data Acquisition Systems iNET-400 Series Expandable Modular Data Acquisition System • Directly Connects to Thermocouple, RTD, Thermistor, Strain Gage, Load Complete Cell, Voltage, Current, Resistance Starter and Accelerometer Inputs System $ • USB 2.0 High Speed Data Acquisition 990 Hardware for Windows® ≥XP SP2, Vista or 7 (XP/VS/7) • Analog and Digital Input and Outputs • Free instruNet World Software Visit omega.com/inet-400_series © Kutt Niinepuu / Dreamstime.com Stand-Alone, High-Speed, 8-Channel High Speed Voltage Multifunction Data Loggers Input USB Data Acquisition Modules OM-USB-1208HS Series Starts at $499 High Performance Multi-Function I/O USB Data Acquisition Modules OMB-DAQ-2416 Series OM-LGR-5320 Series Starts at Starts at $1100 $1499 Visit omega.com/om-lgr-5320_series Visit omega.com/om-usb-1208hs_series Visit omega.com/omb-daq-2416 ® omega.com ® © COPYRIGHT 2012 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED Omega.indd 1 3/14/12 10:54 AM Degrees of Freedom by Jamie J.
    [Show full text]
  • Helena Laboratories Solid Edge Customer Success Story
    Medical devices Helena Laboratories Medical device maker enables CAD data preservation and stable future using Solid Edge with synchronous technology Product Helena moves to Solid Edge Solid Edge ahead of modeling kernel change of SolidWorks; use of Solid Edge enables 100 percent Business challenges CAD system to CAD system data Need to redesign popular conversion product but ensure data longevity Clinical laboratory instrument and Avoid SolidWorks kernel reagent manufacturer change and major data Helena Laboratories is a clinical laboratory reconversion instrument manufacturer. Its clients Leverage 18 years of 3D include major medical centers, small hos- wireframe data pitals, large reference laboratories and Simplify process for key small private doctors’ laboratories. With veteran designers hundreds of laboratory products and more than 40 registered patents, Helena Import of purchased parts continues to be a market leader in Need to reduce very large the design and development of new diag- SolidWorks data files nostic tests. Need secure data manage- In 2007, Helena switched from an aging ment future Undertaking this and other major design 3D wireframe design tool to SolidWorks® work using SolidWorks seemed logical. software, the popular computer-aided But recent press and blog posts from Keys to success design (CAD) system from Dassault SolidWorks users that Dassault planned to Systèmes Solidworks Corporation. Find a way to protect CAD remove the Parasolid® software modeling Recently, Helena decided to redesign one data’s shelf life kernel from its SolidWorks product of its most popular electrophoresis sample Convert SolidWorks data to worried Helena. handlers. Handlers are used in applications Solid Edge using synchronous such as forensics, molecular biology, technology Before the redesign projects could begin, genetics, microbiology and biochemistry.
    [Show full text]
  • Cadkey Cadkey
    CONCURRENT ENGINEERING FOR THE 90 ' S CE Solution DWG files and CADKEY High Pe MONI DRAF Prod uctivity CADKEY at Work HOT CARS Scaled Down "ADURA "ARK M DURA STUDIOS Permit No . 4 332 NEWBURY ST . Spokane. WA 2ND fLOOR BOSTON MA 02115 Easy Does It. Introducing the Kurta XLP": .. Another Kurta Original Draw on the best name for quality and reliability with Kurta's new XLP graphics ta!ile for IBM® pes and c les. Th y-t res S . ketch® compati virtually all softwar; sophis d CAD. The price is compatible too . .. just $395 for the entire package, including: • 12 "x12 " high-accuracy tablet • 2-switch pen and program­ mable 4-button cursor • An integrated mouse/AD!'" driver with auto-toggle between mouse and ADI modes and a WindoWS® driver in absolute mode • Test, Set-mode and Reset utilities • Since the XLP draws its power from the serial port, no power supply is needed • Unlimited free technical support • Lifetime W-lrranty! Get a total performance package, with the award-winning qualities you've come to expect in reliable Kurta products ... from the value-leading XLP to the high-end, feature-rich IS /ONE® and large format XLC ~ It's the easy way to better graphics for greater productivity: ® s. 1-800-44-KURfA WURTR® 3007 East Chambers Phoenix, Arizona 85040 (602) 2765533 Kurtl, cok.x swdSh;ux1 XLP are registered u-dderrr.u'ks of Kurta Corp Wtr\duY.Is 1<; .. regisIenrl tr.tdematk of Mia'nsofi Corp ADI is .. regisIt:n=d tradem:uk of Autodesk Inc.
    [Show full text]