Industrial Metalworking Tooling &SolutionsSince1965

APR-JUN 2021 4 Pc. Combination Punch & Die Set Square Set Traditional Style FEATURES: • Cuts steel, brass, copper, aluminum, rubber, and plastic up to .025" thick. • Economical way to make washers, shims, and gaskets. • Clear plastic top plate marked with accurate center lines. • Cuts stainless and blue tempered shim up to .010" thick. • Base and punches are made of hardened and ground A-2 tool steel.

FEATURES: SET INCLUDES: • Hardened and tempered • (9) Punches, Sizes: 1/8", 3/16", 1/4", Part No. 1-958-315 $ 08 blade with satin chrome finish. 5/16", 3/8", 7/16", 1/2", 5/8", 3/4". Reg. Net Price $129.50 110 • Square head, center head, and protractor hardened and ground. • Used for layouts, set-ups, checking heights, depths, & setting angles, etc. Stainless Steel • Square head has a level and scriber. Protractors GRADUATIONS: 1.0mm/64ths, .05mm/32nds, 12" Blade FEATURES: • Used for drawing radial • Made of tempered steel Part No. 1-812-001 $ 80 lines, transferring angles, with satin chrome finish. Head Part No. Reg. Style 1-804- Net Price SALE! Reg. Net Price $48.50 38 and setting bevels. • Head Measures: 3-5/16 x 2". • Blade secured firmly by • Measures angles from 0-180O. Rectangle -17SS $17.48 $14.86 lock nut at any angle. • 6" arm and knurled thumb lock nut. Semi-Circle -18SS 17.48 14.86

Bantam System B1 12 Pc. 1/4" & 3/8" Drive Boring Kit Torx® Bit Socket Set

SET INCLUDES: • 1/4" Drive: T10, T15, T20, T25, T27, T30 • 3/8" Drive: T40, T45, T47, T50, T55, T60 • Storage Rack Part No. 1-552-CBSS2 $ 81 Reg. Net Price $28.01 23 FEATURES: • .180" minimum bore • .007" radius inserts Part No. 1-294-071 • GP22 grade inserts Reg. Net Price $176.14 3 Pc. Extension Bar Set INCLUDES: 3/8" Drive, 3", 6", 10" Extensions • 1 CSBI-165/187-1/2-7R holder $ 53 Chrome Vanadium • 10 CDCG-505L inserts 158 alloy steel for long Part No. 1-552-CDTA15 $ 96 lasting durability Reg. Net Price $18.78 and protection. 15 Brighter... with Laser! 14-1/2" Capacity Gravity Feed NEBO The Larry™ 2 Vertical Saw 12 LED + Laser Work Light Model EF With Any Online Order $149 or More! FEATURES: • 1 HP Motor, 1 Phase. Part No. 6-398-005 Valid 4/1/21 - 6/30/21. • Accepts blades $ 00 Registered Customers Only. from 1/4"-3/4" wide. 5,595 One Time Use. • 4 blade speeds to select from. $ 52 • Accurate gravity feed with hydraulic 14 speed control and depth stop. FINANCE AS LOW AS COUPON CODE: Part No. FREE0421U • Rugged simple construction for easy $128.69/mo. 1-541-6052 Value! maintenance and long service life. CALL FOR DETAILS

WEB: PHONE: M-F 8am - 8pm, EST FAX: FAX ORDERS 24/7 KBCTools.com 1-800-521-1740 1-800-322-4292 QUICK INDEX Cutting Tools...... 2, 4-7, 36 Industrial Metalworking Tooling & Solutions Since 1965 Carbide Tooling ...... 1, 3, 8-9, 36 Fluids ...... 32 Flange Workholding Tools ...... 3, 10-13 (Collar) Nuts Deluxe Abrasives ...... 2-3, 14-15, 35 Quick-Lock Measuring & Inspection ...... 1-2, 16-21, 36 Case A “The Abrasive Hardware Specialist” Drum Kit Hardened Toolroom Accessories ...... 1-3, 22-23, 36 Black General Purpose with Shank K B Hand Tools ...... 1, 33 Oxide C Finish Shop Supplies ...... 30-31 Power / Air Tools ...... 34-35 Ref. Thread Part No. No. A B C K 1-903- ONLY! Machinery ...... 1, 24-29 FN-14 1/4-20" 5/8" 5/16" 1/2" -41601 $1.52 FN-56 5/16-18 3/4 3/8 9/16 -41602 1.61 FN-38 3/8-16 7/8 1/2 11/16 -41603 1.73 FN-76 7/16-14 1 9/16 3/4 -41604 2.01 FN-12 1/2-13 1-1/8 11/16 7/8 -41605 2.05 FN-58 5/8-11 1-3/8 13/16 1-1/16 -41606 2.63 100% SATISFACTION FN-34 3/4-10 1-5/8 1 1-1/4 -41607 3.87 FEATURES: GUARANTEED: If you are not 100% • Turn spindle clockwise to expand N rubber for quick-lock, and counter satisfied for any reason just S O Solid Carbide A I clockwise to loosen for quick-change. return the unused item(s) in TI CT No tools necessary its original packaging within SFA Hi-Roc Drill Sets • The rubber spindle is seated directly 30 days, with your receipt for a Series 200 on the drive mandrel (arbor). replacement, exchange, full credit or refund. Designed to SLEEVES KIT INCLUDES: FREE SHIPPING: drill hardened (for ea. drum size): Orders over $275.00 (50 lbs. weight limit per order) steel in the • 1/4" Shank SHIPPED FREE - via our standard shipping method. • (1) Fine (120 grit) Drums: 42-65 Rockwell • (1) Medium (80 grit) Some restrictions mayYe apply.s! We’r We’re KeepinC range. 1/2" x 1/2", e g • (1) Coarse (50 grit) 3/4" x 1", 1" x 1", Nort 1-1/2" x 1-1/2", 99% of All OrdersOPEN SETS INCLUDE:h America 2" x 1-1/2" Ship the Same Day... AW selection of more frequently Or you can Pick Up at your used, fractionalORKING size drills, Model # QLK-15 Local Branch.* Your Choice. packed neatly in a plastic case. Part No. 1-612C-055 $ 57 * Excludes Machinery & Non-Stock Items. No. of Part No. Reg. Reg. Net Price $30.08 25 Drills Sizes 5-100- Net Price SALE! 5 1/8" to 3/8" by 16ths -20181 $194.09 $164.98 DAMAGED, LOST, OR SHORT SHIPMENTS: It doesn’t happen often, but if it does, call your local 7 1/16" to 1/4" by 32nds -20367 170.30 144.76 courier office immediately, and advise KBC so that COUNT 10 3/64" to 3/16" by 64ths -20526 197.85 168.17 we can reship and place a claim. Please keep dam- aged goods and containers until the claim is closed. onWe’re KBC! Keepin g Yes! We’re North America Linear Height Gage TRUCK SHIPMENTS: KBC is not responsible for merchandiseOPEN damaged WORKING Series 518 - High Performance or lost by motor freight carriers. If the shipment is 2D Measurement System FEATURES: damaged or short one or more packages, please • Data entry from a digimatic tool. have it noted by the truck driver on receipt and • Perpendicularity (frontal) of 5μm & freight bill. If you accept a short or damaged We’re Keepin g straightness of 4μm are guaranteed. Yeshipments! We’r frome the truck driver without proper • COUNTPneumatic full/semi-floating system notation by the driver, youNo rtdoh so America at your own risk. allowson KBC! adjustment of air-cushion height. OPEN WORKING • Basic statistical functions are provided PRICING: & RS-232C/USB data output provides KBC Tools & Machinery traditionally holds prices the option of evaluating measurement Model LH-600EG for the duration of its sales flyers. As industrial data externally w/SPC software on a PC. With Power Grip market conditions continue to change across North • 1-key operation for running a Part No. 1-808-518352 America (tariffs, raw material, and price increases), You semi-automatic can measurement. Reg. Net Price $8,990.00 KBC reserves the right toCOUNT change prices based upon SPECIFICATIONS: $ 00 inventory conditions andon supplier KBC! price increases COUNTRange ...... 0-38" (0-972mm) without notice. BUY NOW! KBC Tools & Machinery onSlider Stroke ...... 24" (600mm) 8,091 strives to be your choice for all your tooling needs. Resolution KBC!...... Switchable AccuracyYou can at 20o...... 000043" MINIMUM ORDER: FloatingCOUNT Method ...... Full/Semi-Floating Only $25.00, to cover processing costs...... on KBC! with Built-In Air Compressor We’re Keepin g Display ...... TFT LCD (Color) YeOOPS!:s! We’r e Errors do occur, so mistakesNorth are America subject OPENto correction. Sorry for WanyORKING inconvenience. You can 24/7 All Tools... COUNTYou can All The Time. GSA Contract #BPA-GS-06F-4KBCTYou can on COUNT COUNT KBC!on KBC! We’re Keepin g on KBC! Yes! We’re FLAT RATE Contact-FreeCOUNT Service: North America SHIPPING 24/7 PICK-UP - Order Shipmenton KBC! EnsuringOPEN Safety: WORKING LOCKERS - Locker or - Scheduled Cleanings Curbside Pick-up - Social Distancing On All Check out the big You can Online Orders red lockers outside our COUNT COUNTup to 50 lbs. KBC Michigan location. on Just order during regular Fast Service: KBC! onSome KBC! restrictions may apply. - Quick Order Turn-Around 99% business hours and pick - Easy Online Ordering of All Orders Ship Same Day* FREE SHIPPING up your order anytime! *Excludes Machinery & Non-Stock Items ORDERS OVER $27500 You can Your tools... your time. COUNT on KBC! 2 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com You can You can COUNT COUNT on KBC! on KBC!

You can COUNT on KBC! Horizontal/Vertical Depressed Center Wheels CNC Tool TYPE 27 Tightening Fixtures 1/8" Cutting/Notching Wheels METAL FEATURES: • Multiple usage on tool holder tapers A24R: Aluminum oxide grain. R-grade bond for fast cutting and long NMTB/NST, ISO, CAT, BT and DIN. life. Works well on steel, cast iron, and welds. • Enables strong gripping Max. Part No. Reg. power of cutting tools in Size RPM 1-602- Net Price SALE! horizontal and vertical positions. 4-1/2" x 1/8"x 7/8" 13,300 -35612 $1.90 $1.62 • Light weight and compact design for 5 x 1/8 x 7/8 12,250 -35675 2.35 2.00 mounting on work table or tool cart. 7 x 1/8 x 7/8 8,600 -35634 3.45 2.93 Weight Part No. Reg Taper (lbs.) 7-189- Net Price NOW! CAT/BT 40 4.2 -740 $158.84 $135.01 CAT/BT 50 8.4 -750 233.70 198.65 1/4" Grinding Wheels METAL A24N Fast Cut Aluminum Oxide Grain: Soft N-grade bond Metric for fast stock removal. Excellent ratio of stock removal/wheel loss. Threaded Economical choice for metal and low-grade stainless. Max. Part No. Reg. Rod Size RPM 1-602- Net Price SALE! 4" x 1/4"x 5/8" 15,300 -35699 $1.30 $1.11 4-1/2 x 1/4 x 7/8 13,300 -35622 1.55 1.32 7 x 1/4 x 7/8 8,600 -35642 3.00 2.55

PLAIN OIL FINISH FEATURES: CAT40 V-Flange • 1 meter lengths. Part No. • Coupling nuts can Size Pitch 1-919- ONLY! Pull Studs or be used to make M6 1.00 -068 $4.60 Retention Knobs longer lengths. M8 1.25 -070 6.65 • High quality M10 1.50 -072 9.95 low carbon steel. M12 1.75 -074 14.70 Although retention knobs often look very similar they are not interchangeable. The use of an incorrect knob or the misuse of a knob may result in injury or property damage. It is the responsibility of the end user to verify the supplied knob is correct for the machine.

Engraver Identify Retention knob failures may and personalize occur for several reasons: your valuables! improper knob configuration, INCLUDES: misaligned machines, metal • Letter/Number Template. Use for decorative engraving. fatigue due to usage, over • Carbide Point (9924). torquing, exceeding • Engraver Tool. the machine’s capability, etc. Retention knobs should periodically FEATURES: be inspected. If there are signs of • Engraves metal, glass, excessive wear or damage, the retention knob should be replaced. wood, plastic, and ceramics. STYLE 1 STYLE 3 STYLE 6 • Holding area allows for extended use. • Soft grip adds extra comfort and control. Coolant Part No. Reg. Style Thread Angle OAL A B C E F Hole 7-081- Net Price NOW! o Model 290 SPECIFICATIONS: 3 5/8-11 45 2.250 .236 .590 1.281 .990 .390 — -C40002 $15.68 $14.11 Voltage ...... 115 AC, 60 Hz 3 5/8-11 45o 2.250 .236 .590 1.281 .990 .390 .156 -C40008 18.15 16.34 Part No. $ 30 Amps ...... 0.2 6 5/8-11 45o 2.125 .120 .590 1.250 .990 .390 — -C40020 16.50 14.85 1-829-290 24 Stroke per Minute ...... 7,200 1 5/8-11 45o 1.500 .120 .740 .625 .440 .490 .250 -C40046 14.03 12.63

RM3 Indexable Versatile milling tool that meets demanding Shoulder Mills performance and capacity requirements. INDEXABLE END MILLS - 4000 TYPE FEATURES: Cutting Cutting Shank • Excellent results in quality Dia. OAL Length Dia. Part No. Reg. Cutting Depth (ap): .315" and high machining stability even (D) (L) (I) (d) 1-244R- Net Price SALE! in the toughest cutting conditions. 1" 7.874" 1.575" 1" -017 $185.28 $157.49 • High rigidity and in clamping operations, 1 4.528 1.575 1 -014 162.67 138.27 such as shouldering, ramping, facing, 1.25 7.874 1.654 1.25 -018 197.41 167.80 slotting, and plunging, even high feed 1.25 4.922 1.654 1.25 -015 173.32 147.32 milling, the RM3 shows no signs of tool failure. 1.50 7.874 1.654 1.25 -019 223.29 189.80 Uses XNKT Style Inserts. 1.50 5.315 1.654 1.25 -016 196.05 166.64

XNKT GRADE PC5300 - Excellent for high speed machining of stainless steel and general machining of alloy steel and Carbide Inserts cast iron. Recommended cutting speed 295~787 SFM. XNKT-ML Part No. Reg. FEATURES: SALE! XNKT-MM • MM Chipbreaker for general shoulder operations. Insert Style r 1-244P- Net Price High rake angle with smooth chip flow. XNKT 080508PNER-ML* .031" -803 $8.81 $7.49 • Step design for good chip evacuation with low cutting force. XNKT 080508PNSR-MM .031 -802 8.81 7.49 DIMENSIONS: • Minor cutting edge wiper action for better surface finish. XNKT 080512PNSR-MM .047 -806 8.81 7.49 • a...... 114" XNKT 080516PNSR-MM .063 -807 8.81 7.49 • d ...... 394" • Major cutting edge has a high rake sharpened XNKT 080520PNSR-MM .079 -808 8.81 7.49 edge with two step clearance for strong • d1...... 177" * Milling Light Chipbreaker: Sharp cutting edge for • t ...... 217" clamping and rigidity improvement. hard-to-cut materials with a low cutting force.

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 3 CUTTING TOOLS PLUG STYLE SHARK LINE Ground No. of Thread Part No. Reg. DIN ANSI Blue Shark Size Flutes Limits 1-351- Net Price SALE! Spiral Pointed Taps 10-24 NC 3 H-3 -7350281 $18.40 $15.64 TAKE A BITE OUT OF THREADING. 10-32 NF 3 H-3 -7350299 18.40 15.64 For Stainless Steel 1/4-20 NC 3 H-3 -7350283 23.80 20.23 1/4-20 NC 3 H-5 -7350282 23.80 20.23 Super-B (TiAlN + WC/C) coating 1/4-28 NF 3 H-3 -7350301 23.80 20.23 with additiona edge treatment. 1/4-28 NF 3 H-5 -7350300 23.80 20.23 Manufactured from a unique powder metallurgy tool steel different from any other HSS-E-PM. 5/16-18 NC 3 H-3 -7350285 25.90 22.02 5/16-18 NC 3 H-5 -7350284 25.90 22.02 This provides an unbeatable combination of toughness and edge strength, allowing the taps to 5/16-24 NF 3 H-3 -7350303 25.90 22.02 perform at higher cutting temperatures while offering excellent performance and longer tool life. 5/16-24 NF 3 H-4 -7350302 25.90 22.02 3/8-16 NC 3 H-3 -7350287 29.20 24.82 FEATURES: 3/8-16 NC 3 H-5 -7350286 29.20 24.82 • Advanced Geometry & Chamfer - Thread geometry with optimized form generates low torque, 3/8-24 NF 3 H-3 -7350305 29.20 24.82 excellent threads at both high and low speeds, and superior surface finish. Significant reduction 3/8-24 NF 3 H-4 -7350304 29.20 24.82 in axial forces and torque compared to conventional taps ensuring problem-free threading of 7/16-14 NC 4 H-5 -7350288 37.80 32.13 blind and through holes in the selected material. 7/16-20 NF 4 H-5 -7350306 37.75 32.09 • Standard ANSI shank and square with DIN overall length, for 1/2-13 NC 4 H-3 -7350290 43.90 37.32 extra reach and compatibility with Inch Standard Tap Holding. More info. & complete listing of 1/2-13 NC 4 H-5 -7350289 43.90 37.32 • Color ring coding: Identify suitability for specific Dormer Shark Taps @ KBCTools.com 1/2-20 NF 4 H-3 -7350308 43.90 37.32 materials and enables quick and easy tool selection. 1/2-20 NF 4 H-5 -7350307 43.90 37.32

Heavy-Duty Premium Steel No. BRIGHT BLUE DIAMOND H of Part No. Reg. Part No. Reg. Spiral Fluted Taps Size Limit Flutes 407VPR- Net Price NOW! 407VPR- Net Price NOW! With Penta Relief CPM-M4 Steel 4-40 NC H-2 2 -86703 $23.64 $20.09 -86705 $24.77 $21.05 5-40 NC H-2 2 -86707 23.64 20.09 -86709 24.77 21.05 LIST NO. 407VPR RIGH HAND 6-32 NC H-3 3 -86711 18.83 16.01 -86713 19.74 16.78 8-32 NC H-3 3 -86715 18.83 16.01 -86717 19.74 16.78 CNC DESIGN - BOTTOM STYLE 10-24 NC H-3 3 -86719 18.83 16.01 -86721 19.77 16.80 10-32 NF H-3 3 -86723 18.83 16.01 -86725 19.77 16.80 R&N Premium taps are manufactured from 1/4-20 NC H-3 3 -86735 20.68 17.58 -86737 21.72 18.46 4% vanadium CPM-M4 steel. The spiral flute 1/4-20 NC H-5 3 -86739 20.68 17.58 -86741 21.72 18.46 taps are for tapping blind-holes and will draw 1/4-28 NF H-3 3 -86743 20.68 17.58 -86745 21.72 18.46 chips out of the hole. Taps have the CNC 5/16-18 NC H-3 3 -86747 22.74 19.33 -86749 23.94 20.35 neck which is smaller than conventional taps 5/16-18 NC H-5 3 -86751 22.74 19.33 -86753 23.94 20.35 to allow for better coolant flow to the teeth of 5/16-24 NF H-3 3 -86755 22.74 19.33 -86757 23.94 20.35 the tap. Taps are designed for tougher, more 3/8-16 NC H-3 3 -86759 26.62 22.63 -86761 27.98 23.78 abrasive materials up to 35 Rc. 3/8-16 NC H-5 3 -86763 26.62 22.63 -86765 27.98 23.78 3/8-24 NF H-3 3 -86767 26.62 22.63 -86769 27.98 23.78 7/16-14 NC H-3 3 -86771 42.39 36.03 -86773 44.28 37.64 BLUE DIAMOND FEATURES: 7/16-14 NC H-5 3 -86775 42.39 36.03 -86777 44.28 37.64 Specially treated electro chemical surface 7/16-20 NF H-3 3 -86779 42.39 36.03 -86781 44.28 37.64 designed to eliminate surface welding 1/2-13 NC H-3 3 -86783 50.57 42.98 -86785 52.81 44.89 1/2-13 NC H-5 3 -86787 50.57 42.98 -86789 52.81 44.89 when tapping soft stringy materials. 9/16-12 NC H-5 3 -86799 57.09 48.53 -86803 59.78 50.81 9/16-18 NF H-3 3 -86805 57.09 48.53 -86807 59.78 50.81 5/8-11 NC H-3 3 -86809 72.18 61.35 -86811 75.56 64.23 Buy In Package Quantity: 5/8-11 NC H-5 3 -86813 72.18 61.35 -86814 75.56 64.23 4-40 to 3/8-24 12 Per Pack 5/8-18 NF H-3 3 -86817 72.18 61.35 -86819 75.56 64.23 3/4-10 NC H-3 3 -86821 101.57 86.33 -86823 106.32 90.37 7/16-14 to 1/2-13 6 Per Pack 3/4-10 NC H-5 3 -86825 101.57 86.33 -86827 106.32 90.37 9/16-12 to 3/4-16 3 Per Pack 3/4-16 NF H-3 3 -86829 101.57 86.33 -86831 106.32 90.37

Thread Repair Kits Metric KITS INCLUDE: • (1) Tap Spiral Pointed • (10) Inserts • (1) Installation Tool Hand Taps • (1) Drill • (1) Tang Break LIST NO. 102M RIGHT HAND PLUG STYLE Thread Part No. Reg. HIGH SPEED STEEL Size 1-842- Net Price SALE! Pitch GROUND THREAD Dia. No. of Part No. Reg. 4-40 x 1.5D -SK20215 $33.32 $28.32 Size Limit Flutes 102M- Net Price SALE! 5-40 x 1.5D -SK20315 33.35 28.35 6-32 x 1.5D -SK20415 31.45 26.73 FEATURES: M2.5X0.45 D3 2 -62814 $12.25 $11.03 8-32 x 1.5D -SK20515 32.55 27.67 • Commonly referred M3X0.5 D3 2 -62818 10.11 9.10 10-24 x 1.5D -SK20615 29.75 25.29 to as "gun" taps. M4X0.7 D4 2 -62826 8.30 7.47 12-24 x 1.5D -SK20715 36.50 31.03 • Production tapping M5X0.8 D4 2 -62834 8.30 7.47 1/4-20 x 1.5D -SK20815 33.02 28.07 of through holes. M6X1 D5 2 -62838 8.87 7.98 5/16-18 x 1.5D -SK20915 35.91 30.52 • Flute design forces the M8X1.25 D5 2 -62850 9.91 8.92 3/8-16 x 1.5D -SK21015 42.80 36.38 evacuation of chips ahead M10X1.5 D6 3 -62854 18.21 16.39 4-48 x 1.5D -SK30215 33.35 28.35 of the cutting action. M12X1.75 D6 3 -62858 22.67 20.40 6-40 x 1.5D -SK30415 31.45 26.73 8-36 x 1.5D -SK30515 32.55 27.67 10-32 x 1.5D -SK30615 29.75 25.29 1/4-28 x 1.5D -SK30815 31.95 27.16 5 Flute NPT Taper Used for pipe fittings and 5/16-24 x 1.5D -SK30915 37.33 31.73 the sizes are determined 3/8-24 x 1.5D -SK31015 42.80 36.38 Pipe Plug Taps by the nominal pipe size. HIGH SPEED STEEL GROUND THREAD 38 Pc. C-6 LIST NO. 120G Carbide Tipped RIGHT HAND Toolbit NPT - For tapping tapered Sets pipe threads. This is the most Part No. Reg. common of all pipe tap styles. Size 120G- Net Price SALE! SET INCLUDES: The tapered thread form • 8 each AR & AL creates a pressure-tight joint 1/8-27 -18NPT-50P $20.13 $16.10 • 4 each BR & BL when used with a sealant. 1/4-18 -14NPT-50P 22.57 18.06 • 4 each C & D 3/8-18 -38NPT-50P 28.87 23.10 Dimensions Part No. Reg. • 6 each E Square Length 1-425B- Net Price NOW! Buy In Package Quantity: 1/2-14 -12NPT-50P 48.05 38.44 3/4-14 -34NPT-50P 69.68 55.74 C-6 Grade Use: 1/4" 2" -4SET $63.50 $50.80 1/8-27 to 3/8-18 6 Per Pack 1-11-1/2 -1NPT-50P 98.97 79.18 3/8 2-1/2 -6SET 67.50 54.00 1/2-14 to 1-1/4-11½ 3 Per Pack General purpose 1-1/4-11-1/2 -114NPT-50P 140.89 112.71 carbide grade for steel & steel alloys. 1/2 3-1/2 -8SET 93.50 74.80

4 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com CUTTING TOOLS Metric Chucking 5 Pc. Solid Reamers Carbide Burr Set

STRAIGHT FLUTE STRAIGHT SHANK HIGH SPEED STEEL 1/4" Head Diameter, 1/4" Shank Diameter.

SET INCLUDES: SA-1, SC-1, SD-1, SG-1, and SM-1.

Size Flute Part No. Reg. Part No. 1-338-001 $ 92 Supplied in a MM Length OAL 1-136A- Net Price SALE! Reg. Net Price $50.49 42 fitted plastic case. 1 1/2" 2-1/2" -20012 $16.54 $14.06 2 3/4 3 -20031 12.88 10.95 3 7/8 3-1/2 -20050 13.86 11.78 DIAMETER 4 1 4 -20069 16.50 14.03 TOLERANCES: 5 1-1/4 5 -20090 18.78 15.96 7 Pc. 3 Flute Solid Cap +.0002"/-.0000" 6 1-1/2 6 -20104 20.79 17.67 7 1-1/2 6 -20119 21.74 18.48 Screw Counterbore Set Designed for use 8 1-1/2 6 -20133 21.74 18.48 9 1-3/4 7 -20142 25.48 21.66 in turret lathes, 10 1-3/4 7 -20155 26.50 22.53 FEATURES: screw machines, • Designed to create a recess for socket 11 1-3/4 7 -20162 29.37 24.96 drill presses and 12 2 8 -20171 29.89 25.41 head cap screws and shoulder screws. all types of machine 13 2 8 -20179 35.71 30.35 • Also used for spot facing smaller tool equipment. 14 2 8 -20182 37.92 32.23 spots, enlarging, or cleaning holes. Ground with 15 2 8 -20185 39.65 33.70 • Solid pilot will not score a 45O chamfer. 16 2-1/4 9 -20189 53.71 45.65 or damage pilot hole. • Cutting action is chatterless.

SET INCLUDES: HIGH SPEED 14 Pc. Sizes - 6, 8, 10, 1/4", 5/16", 3/8", 1/2" STEEL Part No. 1-166-400 STRAIGHT Carbide-Tipped $ 16 SHANK Reg. Net Price $108.95 Supplied in General Purpose 87 wood stand. Hole Saw Kit

FEATURES: Uniflute Carbide • High performance triple chip tungsten Countersinks carbide tipped saws. Series 60 • Provides superior performance on materials too hard or abrasive for conventional FEATURES: For use on abrasive, • Easily resharpened. high speed steel saws. non-metallic • Features extended life • May be used on hardened steel and work hardening alloys. and non-ferrous • Rigid set-ups and good machinery maintenance are a must. when used to cut wood, materials. PVC, man-made building Supplied in materials and fiberglass. a carry case. Body Shank Part No. 5-100- Reg. Dia. OAL Dia. 60O 82O 90O Net Price SALE! KIT INCLUDES: 1/8" 1-1/2" 1/8" -60001 -60006 -60011 $13.72 $11.66 • (9) Hole Saws: 3/4", 7/8", 1-1/8", Starrett #KCT090501-N 3/16 1-1/2 3/16 -60021 -60026 -60031 17.18 14.60 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2" Part No. 1-856-69971 1/4 2 1/4 -60041 -60046 -60051 20.75 17.64 • (2) Arbors: XA1 & XA2. Reg. Net Price $224.85 3/8 2 1/4 -60061 -60066 -60071 40.36 34.31 • (1) Carbide Tipped Pilot Bit: XA014C. Not recommended 1/2 2-3/8 1/4 -60081 -60086 -60091 55.99 47.59 • (1) A15 12" Extension 3/4 3 1/2 -60101 -60106 -60111 104.14 88.52 $ 12 for use in 1 3 1/2 -60121 -60126 -60131 170.34 144.79 • (1) A7 Ejector Spring. 191 hand-held tools.

Long Series Combined 5 Pc. M-42 Cobalt 6 Flute 82o Drills & Countersinks Combined Drill & Chatterless Countersink Set Countersinks

Plain type combined drills HIGH SPEED and countersinks are used STEEL 60° INCLUDED ANGLE for producing center holes in components or workpieces HIGH SPEED STEEL which require machining Used for producing center holes in between centers. components or workpieces with the extra length allowing access to difficult-to-reach areas. RIGHT HAND Designed for general purpose 60° INCLUDED ANGLE countersinking, chamfering and Body Drill Part No. Reg. deburring. Multiflute design reduces Size Dia. Dia. OAL 1-047A- Net Price SALE! chip load and chatter even at high speeds. 1 1/8" 3/64" 3" -130 $13.13 $11.82 Body Part No. Reg. 1 1/8 3/64 4 -140 13.70 12.33 Dia. Shank OAL 1-160A- Net Price NOW! 1 1/8 3/64 5 -150 19.03 17.13 1 1/8 3/64 6 -160 24.92 22.43 3/16" 3/16" 1-1/2" -81050 $5.57 $4.73 2 3/16 5/64 4 -240 15.02 13.52 1/4 1/4 2 -81051 6.07 5.16 2 3/16 5/64 5 -250 19.24 17.32 5/16 1/4 2 -81052 6.91 5.87 2 3/16 5/64 6 -260 25.02 22.52 3/8 1/4 2 -81053 8.03 6.83 1/2 1/4 2 -81054 10.16 8.64 3 1/4 7/64 4 -340 15.82 14.24 5/8 1/2 2-3/4 -81055 14.55 12.37 3 1/4 7/64 5 -350 20.81 18.73 3 1/4 7/64 6 -360 25.25 22.73 3/4 1/2 2-3/4 -81056 19.50 16.58 7/8 1/2 2-3/4 -81057 24.50 20.83 4 5/16 1/8 4 -440 17.52 15.77 1 1/2 2-3/4 -81058 30.05 25.54 4 5/16 1/8 5 -450 22.40 20.16 1-1/4 3/4 3-3/8 -81059 43.37 36.86 4 5/16 1/8 6 -460 25.86 23.27 1-1/2 3/4 3-1/2 -81060 59.99 50.99 5 7/16 3/16 4 -540 23.03 20.73 1-3/4 1 4-1/4 -81061 81.18 69.00 5 7/16 3/16 5 -550 26.67 24.00 No. 1 - No. 5 2 1 4-3/8 -81062 96.96 82.42 5 7/16 3/16 6 -560 29.94 26.95 Part No. 1-033-100 6 1/2 7/32 5 -650 28.65 25.79 $ 71 Buy In Package Quantity: Up to 1/2" 3 Per Pack 6 1/2 7/32 6 -660 34.63 31.17 Reg. Net Price $30.25 25

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 5 CUTTING TOOLS

o 3 Flute 35 Helix Solid Carbide For Stainless Steel and Buy In Package Quantity: Center Cutting Single End Mills High Temperature Alloys. Up to 1/4" 3 Per Pack LIST NO. S335 AlTiN Coated Mill Shank Length Part No. Reg. CORNER RADIUS Dia. Dia. of Cut OAL Radius 5-303C- Net Price NOW! 1/8" 1/8" 1/4" 1-1/2" .010" -61802 $28.30 $24.06 1/8 1/8 1/2 1-1/2 .010 -61803 31.60 26.86 3/16 3/16 5/16 2 .010 -61806 30.50 25.93 3/16 3/16 9/16 2 .010 -61807 34.00 28.90 1/4 1/4 3/8 2 .020 -61810 32.70 27.80 MICROSHIELD™ AITiN - 1/4 1/4 3/4 2-1/2 .020 -61811 36.60 31.11 AluminumTitanium Nitride: FEATURES: 5/16 5/16 7/16 2 .020 -61814 41.30 35.11 • Advanced flute geometries. 5/16 5/16 13/16 2-1/2 .020 -61815 45.90 39.02 Increased thermal stability when milling • Eccentric primary relief. 3/8 3/8 1/2 2 .020 -61818 51.10 43.44 high temp alloys and Die/Mold steels with • Extra fine grain carbide. 3/8 3/8 1 2-1/2 .020 -61819 56.90 48.37 a hardness of 52 HRc and above. Excellent • Ideal for slotting. 7/16 7/16 9/16 2-1/2 .020 -61820 64.00 54.40 for HSM applications. HSS & HSCO end • Ultra high transverse 7/16 7/16 1 2-3/4 .020 -61821 71.10 60.44 rupture strength. 1/2 1/2 5/8 2-1/2 .030 -61822 78.70 66.90 mills can not be coated with AlTiN. 1/2 1/2 1-1/4 3 .030 -61823 87.50 74.38

4 Flute Extra Length Solid Carbide Center Cutting Single End Mills

TiAIN Coated Mill Shank Length Part No. Reg. Mill Shank Length Part No. Reg. LIST C430 Dia. Dia. of Cut OAL 1-3244T- Net Price SALE! Dia. Dia. of Cut OAL 1-3244T- Net Price SALE! Longer flute length 1/8" 1/8" 5/8" 2" -001 $18.60 $15.81 5/16" 5/16" 1-5/8" 4" -013 $49.40 $41.99 to allow deeper cuts. 1/8 1/8 3/4 3 -002 28.30 24.06 5/16 5/16 1-1/2 6 -014 76.60 65.11 1/8 1/8 1 3 -003 28.30 24.06 3/8 3/8 1 3 -015 52.10 44.29 3/16 3/16 1 3 -004 31.70 26.95 3/8 3/8 1 4 -016 57.20 48.62 MICROSHIELD™ TiAIN - 3/16 3/16 1-1/8 3 -005 31.40 26.69 3/8 3/8 2 4 -017 57.20 48.62 Titanium Aluminum Nitride: 3/16 3/16 1 4 -006 34.70 29.50 3/8 3/8 1-1/2 6 -018 83.30 70.81 3/8 3/8 3 6 -019 83.30 70.81 TiAlN offers a higher level of thermal stability 1/4 1/4 1 3 -007 36.50 31.03 1/4 1/4 1 4 -008 38.60 32.81 1/2 1/2 1 4 -024 84.00 71.40 above TiN & TiCN with abrasion resistance. 1/4 1/4 1-1/2 4 -009 38.60 32.81 1/2 1/2 2 4 -025 84.00 71.40 Ideal for high heat applications found in 1/4 1/4 1-1/2 6 -010 52.10 44.29 1/2 1/2 1-1/2 6 -026 121.00 102.85 milling steels, stainless steels and high temp 5/16 5/16 1 3 -011 46.50 39.53 1/2 1/2 3 6 -027 121.00 102.85 alloys with a hardness of 52 HRC and below. 5/16 5/16 1 4 -012 51.80 44.03

2 & 3 Flute Standard Single end mills are designed Length Solid Carbide for general milling operations. The spiral multi-flute design permits Single End Mills a faster and smoother cutting action.

2 FLUTE 3 FLUTE Flute Shank Flute Part No. Reg. Flute Shank Flute Part No. Reg. Dia. Dia. Length OAL 1-325- Net Price NOW! Dia. Dia. Length OAL 1-330- Net Price NOW! 1/16" 1/8" 3/16" 1-1/2" -004 $5.80 $4.64 1/16" 1/8" 3/16" 1-1/2" -004 $8.00 $6.40 3/32 1/8 3/8 1-1/2 -006 5.80 4.64 3/32 1/8 3/8 1-1/2 -006 8.00 6.40 1/8 1/8 1/2 1-1/2 -008 5.80 4.64 1/8 1/8 1/2 1-1/2 -008 8.00 6.40 5/32 3/16 9/16 2 -010 9.61 7.69 5/32 3/16 9/16 2 -010 9.61 7.69 3/16 3/16 5/8 2 -012 9.28 7.42 3/16 3/16 5/8 2 -012 9.60 7.68 7/32 1/4 5/8 2-1/2 -014 11.23 8.98 7/32 1/4 5/8 2-1/2 -014 11.23 8.98 1/4 1/4 3/4 2-1/2 -016 10.50 8.40 1/4 1/4 3/4 2-1/2 -016 12.20 9.76 9/32 5/16 7/8 2-1/2 -018 13.93 11.14 9/32 5/16 3/4 2-1/2 -018 17.00 13.60 5/16 5/16 7/8 2-1/2 -020 12.90 10.32 5/16 5/16 7/8 2-1/2 -020 15.60 12.48 3/8 3/8 7/8 2-1/2 -024 17.50 14.00 3/8 3/8 1 2-1/2 -024 19.00 15.20 7/16 7/16 1 2-1/2 -028 22.68 18.14 7/16 7/16 1 2-3/4 -028 29.00 23.20 1/2 1/2 1 3 -032 27.50 22.00 1/2 1/2 1 3 -032 32.00 25.60

4 Flute Center 2 & 4 Flute Drill Point TiAIN Cutting Single Solid Carbide End Mills Coated End Mills APPLICATIONS: MICROSHIELD™ TiAIN - • Countersinking 90° INCLUDED POINT ANGLE TOLERANCES: Titanium Aluminum Nitride: Mill Diameter +.001,-.000 • Chamfering Shank Diameter -.0001, -.0005 TiAlN offers a higher level of • Drilling thermal stability above TiN and • Milling Single end mills are designed for general milling operations. TiCN with abrasion resistance. • Spotting The spiral multi-flute design permits a faster and smoother cutting Ideal for high heat applications action. The end cutting edges are ground to permit center cutting. found in milling steels, stainless steels and high temp alloys with a hardness of 52 HRC and below. HIGH SPEED STEEL 2 Flute 4 Flute Shank Flute Part No. Reg. Part No. Reg. Size Dia. Length OAL 1-325DT- Net Price SALE! 1-326DT- Net Price SALE! Mill Shank Length Part No. Reg. 1/8" 1/8" 1/2" 1-1/2" -008 $12.74 $10.83 -008 $12.74 $10.83 Dia. Dia. Of Cut OAL 5-307A- Net Price SALE! 3/16 3/16 5/8 2 -012 16.20 13.77 -012 16.20 13.77 1/8" 3/8" 3/8" 2-5/16" -26004 $12.54 $10.66 1/4 1/4 3/4 2-1/2 -016 21.12 17.95 -016 21.12 17.95 3/16 3/8 1/2 2-3/8 -26010 12.54 10.66 5/16 5/16 13/16 2-1/2 -020 28.62 24.33 -020 28.62 24.33 1/4 3/8 5/8 2-1/2 -26014 12.03 10.23 3/8 3/8 1 2-1/2 -024 31.06 26.40 -024 31.06 26.40 5/16 3/8 3/4 2-1/2 -26018 12.03 10.23 7/16 7/16 1 2-1/2 -028 49.25 41.86 -028 49.25 41.86 3/8 3/8 3/4 2-1/2 -26022 12.25 10.41 1/2 1/2 1 3 -032 52.92 44.98 -032 52.92 44.98 1/2 1/2 1-1/4 3-1/4 -26026 17.67 15.02 5/8 5/8 1-1/4 3-1/2 -040 85.32 72.52 -040 85.32 72.52 5/8 5/8 1-5/8 3-3/4 -26030 22.18 18.85 3/4 3/4 1-1/2 4 -048 126.90 107.87 -048 126.90 107.87

6 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com CUTTING TOOLS Screw Solid Carbide Machine Hi-Tuff Drills Drills Series 205 Designed for drilling 135° POINT Part No. Reg. stainless steel, tool Size OAL 1-050AX- Net Price SALE! FEATURES: steels, titanium, nickel • Fine grain 6% cobalt C-2 grade. base alloys & other high 1/16" 1-5/8" -004 $1.23 $.98 strength ferrous metals. 5/64 1-11/16 -005 1.28 1.02 • Screw machine lengths and a heavy 3/32 1-3/4 -006 1.32 1.06 web provide extra rigidity and strength. 7/64 1-13/16 -007 1.34 1.07 • Web-thinned drill point reduces power requirements, 1/8 1-7/8 -008 1.37 1.10 lowers drilling temperatures and extends tool life. 9/64 1-15/16 -009 1.47 1.18 5/32 2-1/16 -010 1.61 1.29 135O SPLIT Flute Part No. Reg. 11/64 2-1/8 -011 1.74 1.39 POINT Size Dia. Length OAL 5-100- Net Price NOW! 3/16 2-3/16 -012 1.83 1.46 13/64 2-1/4 -013 2.02 1.62 RIGHT HAND 1/64" .0156" 3/16" 3/4" -25013 $13.79 $11.72 7/32 2-3/8 -014 2.18 1.74 1/32 .0312 3/8 1-1/8 -25073 13.17 11.19 15/64 2-7/16 -015 2.29 1.83 3/64 .0469 1/2 1-1/2 -25136 14.76 12.55 1/4 2-1/8 -016 2.38 1.90 BLACK OXIDE 1/16 .0625 5/8 1-5/8 -25169 14.76 12.55 SURFACE 5/64 .0781 11/16 1-11/16 -25199 15.52 13.19 17/64 2-5/8 -017 2.84 2.27 3/32 .0938 3/4 1-3/4 -25232 15.52 13.19 9/32 2-11/16 -018 2.93 2.34 TREATED 19/64 2-3/4 -019 3.26 2.61 Increases 7/64 .1094 13/16 1-13/16 -25265 16.17 13.74 abrasion 1/8 .1250 7/8 1-7/8 -25295 17.54 14.91 5/16 2-13/16 -020 3.34 2.67 9/64 .1406 15/16 1-15/16 -25319 21.41 18.20 21/64 2-15/16 -021 4.05 3.24 resistance, 11/64 .1719 1-1/16 2-1/8 -25379 25.29 21.50 11/32 3 -022 4.36 3.49 reduces the 3/16 .1875 1-1/8 2-3/16 -25406 27.55 23.42 23/64 3-1/16 -023 4.73 3.78 amount of chip 3/8 3-1/8 -024 4.95 3.96 13/64 .2031 1-3/16 2-1/4 -25439 33.55 28.52 welding and 7/32 .2187 1-1/4 2-3/8 -25466 34.69 29.49 25/64 3-1/4 -025 5.63 4.50 improves 13/32 3-5/16 -026 5.79 4.63 15/64 .2344 1-5/16 2-7/16 -25490 37.07 31.51 27/64 3-3/8 -027 6.29 5.03 the chip flow. 1/4 .2500 1-3/8 2-1/2 -25514 38.68 32.88 7/16 3-7/16 -028 6.47 5.18 17/64 .2656 1-7/16 2-5/8 -25535 56.09 47.68 29/64 3-9/16 -029 7.52 6.02 9/32 .2812 1-1/2 2-11/16 -25562 58.39 49.63 15/32 3-5/8 -030 8.01 6.41 Buy In Package Quantity: 19/64 .2969 1-9/16 2-3/4 -25583 58.48 49.71 31/64 3-11/16 -031 8.29 6.63 Up to 5/16" 12 Per Pack 5/16 .3125 1-5/8 2-13/16 -25601 58.48 49.71 1/2 3-3/4 -032 8.38 6.70 21/64" to 1/2" 6 Per Pack 21/64 .3281 1-11/16 2-15/16 -25622 68.12 57.90 11/32 .3438 1-11/16 2-15/16 -25643 75.77 64.40 23/64 .3594 1-3/4 3-1/16 -25664 86.89 73.86 3/8 .3750 1-13/16 3-1/8 -25682 94.41 80.25 Cobalt Silver & Cobalt HSS is used for drilling in tough, high Deming Drills tensile strength materials. High Performance Solid Carbide 1/2" Shank, 6" OAL NC Spotting Drills HIGH SPEED 142O POINT ANGLE STEEL 118O POINT Spotting drills are FEATURES: designed with a narrow • Expands the size range capacity Part No. Reg. chisel edge for quick of a 1/2" portable drill chuck. Size 1-060C- Net Price NOW! starting and constant • Common flute and overall 9/16" -036 $23.38 $19.87 web to allow for length for minimal adjustment 5/8 -040 26.44 22.47 Flute Part No. Reg. resharpening without the during tool changes. 3/4 -048 31.88 27.10 Size Length OAL 1-090A- Net Price SALE! need for web thinning. • Made of heat resistant, 8% 13/16 -052 36.50 31.03 1/8" 5/8" 1-1/2" -34184 $17.43 $14.82 cobalt HSS, with heavy-duty 7/8 -056 39.31 33.41 3/16 13/16 2 -34189 22.91 19.47 flute construction. 15/16 -060 43.94 37.35 1/4 13/16 2-1/2 -34144 29.23 24.85 • Precision ground for high 1 -100 51.69 43.94 5/16 7/8 2-1/2 -34314 35.26 29.97 degree of concentricity between 1-1/4 -116 71.00 60.35 3/8 7/8 2-1/2 -34384 40.36 34.31 shank & body diameter. 1-1/2 -132 96.63 82.14 1/2 1-1/8 3 -34124 63.11 53.64

29 Pc. Screw Cobalt Machine Drill Set Jobbers Drills For drilling tough, high FEATURES: tensile strength materials. HIGH SPEED STEEL • Primarily for use in screw machines. 1/16" to 1/2" by 64ths 135° SPLIT POINT • Performs well in limited access areas Heat resistant 8% cobalt and or where extra rigidity is required. HIGH SPEED STEEL heavy-duty flute construction. RIGHT HAND • Short length provides increased 118° POINT rigidity in machine drilling. Part No. Reg. • Also referred to as "stub drills". RIGHT HAND Size OAL 1-011A- Net Price NOW! 1/16" 1-7/8" -004 $2.21 $1.88 Part No. 1-050A-000 5/64 2 -005 2.21 1.88 $ 87 3/32 2-1/4 -006 2.21 1.88 Reg. Net Price $138.67 117 7/64 2-5/8 -007 2.33 1.98 1/8 2-3/4 -008 2.80 2.38 9/64 2-7/8 -009 2.84 2.41 5/32 3-1/8 -010 3.19 2.71 11/64 3-1/4 -011 3.36 2.86 3-In-1 Jobbers 3/16 3-1/2 -012 3.75 3.19 13/64 3-5/8 -013 4.52 3.84 Drill Set 7/32 3-3/4 -014 4.95 4.21 15/64 3-7/8 -015 5.25 4.46 HIGH SPEED STEEL 1/4 4 -016 5.55 4.72 118° POINT RIGHT HAND 17/64 4-1/8 -017 6.35 5.40 9/32 4-1/4 -018 6.65 5.65 Designed to perform in a wide 19/64 4-3/8 -019 8.14 6.92 variety of normal conditions and 5/16 4-1/2 -020 8.61 7.32 in a broad range of materials in 21/64 4-5/8 -021 9.56 8.13 11/32 4-3/4 -022 10.43 8.87 both machine and portable drilling. 23/64 4-7/8 -023 12.11 10.29 1/16" to 1/2" by 64ths, 3/8 5 -024 11.92 10.13 No. 1 to No. 60 & A to Z 25/64 5-1/8 -025 13.70 11.65 13/32 5-1/4 -026 14.23 12.10 Part No. 27/64 5-3/8 -027 15.79 13.42 7/16 5-1/2 -028 16.12 13.70 1-001A-0115 29/64 5-5/8 -029 19.48 16.56 Reg. Net 15/32 5-3/4 -030 19.83 16.86 $ 78 31/64 5-7/8 -031 20.42 17.36 Price $429.73 343 1/2 6 -032 20.09 17.08

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 7 CARBIDE TOOLING MWLN R 5˚ A Indexable F NIKCOLE MINI-SYSTEMS Toolholders Grooving & For Grooving STYLE L 7˚ NE G RAKE 5˚ C Cut-Off Set 7˚ NEG & Cut-Off Under FEATURES: .078" Width • Negative 5O end or B RIGHT HAND SHOWN B side cutting edge angle. LEFT HAND OPPOSITE • For use with negative 80° trigon WNMG inserts. E

Shank Shank WNMG Tool Height Width OAL Insert Part No. Reg. Style A B C E F Series 1-285R- Net Price NOW! MWLNR 12-3B 3/4" 3/4" 4-1/2" 1" 1" 332 -129 $71.04 $60.38 MWLNR 12-4B 3/4 3/4 4-1/2 1-1/4 1 -065 71.04 60.38 MWLNR 16-4D 1 1 6 1-1/4 1-1/4 432 -070 75.57 64.23

H =H MTGN R 1 FEATURES: SET INCLUDES: • The only system that • (1) Right Hand H Indexable 1 MTGNR H provides youwith two Toolholder Toolholders cutting edges in one 1/2" SQ x 4-1/2" L. insert in extremely • (5) TiN Coated MTGNR B narrow widths. Standard Grooving FEATURES: F • Positive locking insert Inserts: • 0° side cutting edge angle. screw and unique insert • .035" W x .100" T • For use with 60° triangular 90o pocket design assures • .043" W x .235" T negative clearance TNMG inserts. L a repeatable cutting • .051" W x .235" T Right Hand Shown, Left Hand Opposite edge location. • .063" W x .235" T TNMG • .073" W x .235" T Tool Width Height Length Insert Part No. Reg. • (1) Screw & Torx Key. Style B H L F Series 6-742R- Net Price SALE! Supplied with a fitted case. MTGNR 12-3B 3/4" 3/4" 4-1/2" 1" -012 $77.88 $66.20 MTGNR 16-3D 1 1 6 1-1/4 33 -016 80.93 68.79 Part No. 1-293-015 $ 14 MTGNR 16-4D 1 1 6 1-1/4 -216 91.60 77.86 Reg. Net Price $157.81 134 MTGNR 20-4D 1-1/4 1-1/4 6 1-1/2 43 -220 94.73 80.52

Tool Blocks Style WNMG-GM 1-Piece Flexible Clamp Carbide Inserts Grade TG-320 Coated FEATURES: • Double sided. • 0° relief angle. • GM chip control. • Pin and clamp insert. • Depth of Cut: .028" ~ .157". • Feed Rate: .004" ~ .020"/rev. • Use for medium to light cuts. 80o TRIGON Block Blade Part No. Reg. ASA Insert Hole Corner Part No. Reg. No. Size C H H1 E B G 6-895- Net Price NOW! Code IC Size Dia. Thick. Radius 1-2443- Net Price SALE! 19-5 1.02" .79" 1.02" .830" 1.50" .315" 3.5" -6195 $131.45 $111.73 WNMG-332-GM 3/8" .150" 3/16" 1/32" -915 $7.90 $6.32 19-6 1.26 .79 1.26 .970 1.89 .512 4.0 -6196 137.07 116.51 WNMG-432-GM 1/2 .203 3/16 1/32 -921 9.35 7.48 25-6 1.00 1.26 .970 1.89 .315 4.3 -6256 137.07 116.51

Grade TG-320 - Excellent coated grade Buy In for general purpose cuts in steel & steel Package Quantity: alloys. Equivalent to P10-P30 grade. 10 Per Pack Recommended Cutting Speed: 500-1,000 SFM. Style TNMG Carbide Inserts Grade TG-320 Coated FEATURES: • Double sided. • Pin and clamp insert. • 0° relief angle. • Use for medium cuts. • Standard chip control. • Depth of Cut: 5/64" ~ 15/64". • Feed Rate: .010" ~ .020"/rev. TRIANGULAR ASA Insert Hole Corner Part No. Reg. Code IC Size Dia. Thick. Radius 1-2443- Net Price SALE! TNMG-222 1/4" .090" 1/8" 1/32" -621 $6.70 $5.36 TNMG-321 3/8 .150 1/8 1/64 -622 7.55 3.78 TNMG-322 3/8 .150 1/8 1/32 -623 7.55 6.04 TNMG-323 3/8 .150 1/8 3/64 -624 7.55 6.04 TNMG-324 3/8 .150 1/8 1/16 -625 7.55 6.04 TNMG-331 3/8 .150 3/16 1/64 -626 8.20 6.56 TNMG-332 3/8 .150 3/16 1/32 -627 8.20 6.56 TNMG-431 1/2 .203 3/16 1/64 -628 11.65 9.32 TNMG-432 1/2 .203 3/16 1/32 -629 11.65 9.32 TNMG-433 1/2 .203 3/16 3/64 -630 11.65 9.32 TNMG-434 1/2 .203 3/16 1/16 -631 11.65 9.32 TNMG-438 1/2 .203 3/16 1/8 -632 11.65 9.32 TNMG-542 5/8 .253 1/4 1/32 -633 18.70 14.96 TNMG-543 5/8 .253 1/4 3/64 -634 18.70 14.96

8 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com CARBIDE TOOLING SPBA-S Cut-Off Blades SP Carbide Inserts GRADE NC-3030: Excellent coated grade for rough cuts in steel & steel alloys. Equivalent to P20-P40 & M20-M40 grade. Recommended Cutting Speed: 250-650 SFM.

Insert Part No. Reg. Style W l r 1-244X- Net Price SALE! Block Part No. Reg. SP200 .087" .366" .008" -SP2 $11.70 $9.95 No. H W L h 1-244- Net Price NOW! SP200R .087 .366 .008 -SP2R 11.70 9.95 SP200L .087 .366 .008 -SP2L 11.70 9.95 100-S-2 1" 1/16" 4-3/8" .827" -009 $101.15 $85.98 100-S-3 1 3/32 4-3/8 .827 -010 101.15 85.98 SP300 .122 .445 .008 -SP3 11.80 10.03 100-S-4 1 1/8 4-3/8 .827 -011 101.15 85.98 SP300R .122 .445 .008 -SP3R 11.80 10.03 100-S-5 1 5/32 4-3/8 .827 -012 101.15 85.98 SP300L .122 .445 .008 -SP3L 11.80 10.03 125-S-2 1-1/4 1/16 6 .984 -013 101.15 85.98 SP400 .161 .445 .010 -SP4 12.20 10.37 125-S-3 1-1/4 3/32 6 .984 -014 101.15 85.98 SP400R .161 .445 .010 -SP4R 12.20 10.37 125-S-4 1-1/4 1/8 6 .984 -015 101.15 85.98 SP400L .161 .445 .010 -SP4L 12.20 10.37 125-S-5 1-1/4 5/32 6 .984 -016 101.15 85.98 SP500 .201 .449 .012 -SP5 12.80 10.88

Indexable 4 Pc. Boring Bar SCLCR Sets Coolant-Thru FEATURES: Boring Bar Set • New cutting edge by o o simply indexing the insert. 90 Boring & Facing 95 Approach

• Chip breaker eliminates O long stringer chips. For use with 80 diamond Round shanks allow positive clearance CCMT inserts. positive or negative rake. SET INCLUDES: Supplied in a fitted wooden case. • All tools take one size • (4) Boring Bars: 1/4", 5/16", 3/8", 1/2". insert and screw. • 4-Layer Coated Carbide Inserts. Part No. 1-428-400100 $ 21 • Torx Screws & Torx Key. Reg. Net Price $286.90 Set #1 258 Part No. 1-512-720 Shank Bore Min. Description Dia. OAL Depth Bore Reg. Net Price $138.60 Buy In Package Quantity: 10 Per Pack 2-3/4" 1-1/4" 7/16" TNMC Threading $ 74 3-5/8 2-1/8 7/16 Set #1 .500" o 124 3 1-1/2 1/2 Inserts 5o 0o 60 4 2-1/2 1/2 O 60 ‘V’ .003 FLAT Set #2 3 1-1/4 7/16 .005 Part No. 1-512-725 3-7/8 2-1/8 7/16 SCREW 3-1/4 1-1/2 1/2 D 6-1/2o RELIEF Reg. Net Price $237.45 Set #2 .625 4-1/4 2-1/2 1/2 ON INSERT 3-1/2 1-3/4 9/16 BOTH SIDES $ 71 4-5/8 2-7/8 9/16 On edge style 0° rake precision I.C. 213 3-3/8 1-3/8 7/16 ground with double countersinks. T 4-1/4 2-1/4 7/16 Set #3 3-5/8 1-5/8 1/2 C-2 C-5 Coated Part No. 1-2442- Part No. 1-2445- Part No. 1-2448- Part No.1-512-730 Set #3 .750 4-5/8 2-5/8 1/2 Reg. Net Price $358.34 3-7/8 1-7/8 9/16 Insert Part Reg. Reg. Reg. 5 3 9/16 Style I.C. No. Net Price NOW! Net Price NOW! Net Price NOW! 4-1/4 2-1/4 11/16 $ 51 5-1/2 3-1/2 11/16 TNMC-32-NV 3/8" -754 $8.88 $7.55 $9.67 $8.22 $10.81 $9.19 322 NP TNMC-43-NV 1/2 -756 9.95 8.46 10.56 8.98 11.27 9.58 Negative / Positive Frustroconical Land SmoothGrind® ® Freedom Cutter PS 4" SDNCN Indexable Carbide Power Power Shear Threading Toolholders Medium Dish ® O Shear Inserts IC SmoothGrind 55 ‘V’ Turning Power Shear: This blade has a medium dish SS grind compared to the Super Shear blade. The TSuper Shear stronger cutting edge allows for heavier chip load + High Dish ® per blade; up to .010" on metals under 28 RC C SmoothGrind and up to .008" on materials up to 34 RC. R F INSERT SPECIFICATIONS: Shape I.C. T C R FEATURES: 62.5 • For use with DCMT 55O Octagon .062" diamond positive Square .625" .187" 20O .032 Round .312 clearance style inserts. • Each holder includes high GRADE SELECTIONS: precision M2.5 x T8 Torx Type of Screw and Torx key. MTC No. ANSI No. Coating Applications A good all around tool for all MTC-51 C-5 None types of steels and continous DCMT 21.51 INSERT chip materials under 28 Rc. 55o Diamond This advanced PVD coating allows Part No. 1-428-501200 MTC-357 C-5/C-7 PVD TiAlN for elevated SFPM on all types of NOW ONLY! $9.14 steel and cast materials. SDNCN

Uncoated (MTC-51) Coated (MTC-357) Over DCMT Tool Square Insert Insert Part No. Reg. Part No. Reg. Part No. Reg. Style Shank F Series 1-428- Net Price SALE! Insert No. Shape 1-2655- Net Price NOW! 1-2658- Net Price NOW! SDNCN 0505 H2 5/16" .157" -103761 $45.45 $40.91 PS-45L Octagon -020 $14.50 $13.05 -020 $15.50 $13.95 SDNCN 0606 H2 3/8 .189 -103762 53.20 47.88 PS-032 Square -025 14.50 13.05 -025 15.50 13.95 SDNCN 0808 H2 1/2 .250 21.51 -103763 56.00 50.40 PS-312 Round -030 14.50 13.05 -030 15.50 13.95 SDNCN 1010 H2 5/8 .313 -103764 62.15 55.94

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 9 WORK HOLDING Vise Jaw Toolmakers The most advanced Precision Stop jaw stop to date! Steel Vise FEATURES: • Fits all milling machine FEATURES: vises with 1/2"-7/8" thick jaws • Single piece construction and 1/8" minimum protrusion. with V-grooved jaws. • 8-32 non-marring flat point set • All surface including jaws screws are used to secure stop rod. and base are precision • The stop pin is positioned completely ground square and parallel. below the top surface of vise jaw. • Clamping slots at bottom • 1/8" x 2" hardened, adjustable easily affix to angle plates, etc. side-to-side stop pin is used to SPECIFICATIONS: accurately locate workpieces. Made from Jaw Width ...... 2-3/8" • Body is made from anodized aluminum. hardened alloy steel. Jaw Depth ...... 1" • 1-1/8" wide body with 2 hardened steel Max. Jaw Opening ...... 2-1/8" guide pins and large #10 clamp screw. Part No. 2-466-000 $ 76 Body Length ...... 4-3/8" Reg. Net Price $74.70 59 Weight ...... 3.3 lbs. Part No. 1-811-14000 $ 49 Reg. Net Price $24.99 22 More Information @ KBCTools.com

Pro Mill Stop Traditional Drill Table Mount Press Vise FEATURES: FEATURES: • Fixed jaw is grooved. • Table Slot Width: 5/8" • Replaceable jaw plates. For drilling, grinding, • Versatile design rod to be quickly • Machined 4 sides so it can tapping, reaming & More! and accurately positioned. be used on sides or end. • Stop rod stays parallel to Includes SPECIFICATIONS: the milling machine table T-Nut. Model No. 14 Jaw Width ...... 4" • Lever arm can be rotated for cutter clearance Jaw Depth ...... 1-3/4" and accurately relocated for repeat setup. Part No. 1-549-14 $ 75 Jaw Opening ...... 4" (loosening & retightening of screw is required) Reg. Net Price $255.00 Weight...... 19 lbs. • Large 1/2"-13 bolt used to 216 rigidly attach lever arm to base. • Base of unit is keyed to T-slot in table. • Non-marring 1/4"-20 nylon tip set screw. • Non-marring 1/4"-20 flat point set screw. Low Profile Part No. 1-811-16000 $ 99 More Info. @ Drill Press Reg. Net Price $59.99 53 KBCTools.com Model Vises DPL40 FEATURES: 12" Horizontal/Vertical • Replaceable jaws. • Movable jaw on the DPL30 & 40 Rotary Table has a vertical andhorizontal V-groove. Low Profile • DPL60 smooth jaw; DPL80 stepped jaw. • Base has four 1/2" shoulder slots for quick, FEATURES: HUGE SAVINGS! easy positioning on drill press tables. • Rigid, low profile, compact design Quantities Limited. provides for three types of dividing: Model Jaw Jaw Jaw Weight Part No. Reg. 1.) Angular Indexing can be performed No. Width Depth Opening Height (lbs.) 1-549- Net Price SALE! through the graduated ring from 0 to 360° in increments of 1°. DPL30 3" 1-1/8" 3" 2-7/16" 10 -DPL30 $53.00 $45.05 2.) Rapid indexing is done by means DPL40 4 1-1/2 4 2-7/8 15 -DPL40 81.00 68.85 DPL60 6 2 6 3-9/16 34 -DPL60 184.00 156.40 of a special dividing mechanism in DPL80 8 2 8 3-9/16 54 -DPL80 278.00 236.30 divisions 2, 3, 4, 6, 8, 12 & 24 without any disassembly operations. 3.) Indexing with the set of special dividing plates. • Disengageable worm gear 6" Single permits direct & rapid indexing. • The table body is made of semi-steel. Station • Table can be used horizontally & vertically. Machine Vise Part No. 7-621-012 Reg. Net Price $5,959.35 LIFETIME $2,97968 WARRANTY INCLUDES: LARGEST OPENING IN • (2) Mounting ITS CLASS OF 9"! Bolts with Nuts. FEATURES: • (3) Dividing • The angled slide and Plates with Handle. Table with Mounted locking jaw design prevents Dividing Plate & Handle lifting of the moveable jaw. Part No. 1-903-PWS6900 SPECIFICATIONS: • Up to 8,200 lbs. of clamping force. Reg. Net Price $519.00 Diameter...... 12" • Bed height matched to size 2-7/8" Center Hole...... 3MT (73.025mm) +/- 0.0005". $ 10 Worm Ratio...... 1:90 • Stationary jaw has machined keyway 467 Flatness of for alignment of the vise and Clamping Surface ...... 0008" includes alignment rail for quick setups. SPECIFICATIONS: Parallelism of • Hardened vise bed and jaw plates. Clamping Surface to Base...... 0008" Max. Jaw Opening ...... 9" • Outside rail edges of the body are machined. Jaw Width ...... 5.94" Squareness of • More robust main screw that can handle higher Clamping Surface to Base...... 0008" Jaw Depth ...... 1.75" torque loads and transmit higher clamping pressure. Vise Length ...... 17.206" True Running of MT Center Hole ...... 0004" Table with • Footprint and distance from keyway to Indexing Accuracy ...... 1’ Mounted Vise Width ...... 8.77" stationary jaw same as major competitor. Weight ...... 81 lbs. Weight...... 176 lbs. Crank Wheel • Sealed bearing systemreduces clamping pressure and increases bearing life. REPEATABILITY 0.001"

10 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com WORK HOLDING

Model SDW35 SIDEWINDER™ Vises The Kurt SideWinder™ is a vise for doing 2nd op work holding the part vertically rather than horizontally. Mounts vertically to the back of any Kurt 6" or 8" vise with an integral bracket. The bracket will include a stabilization leg that will Model SDW25II mount to the table on the movable end of the vise and a workstop to position the height of the part. FEATURES: • For doing 2nd op vertical work. • Does not interfere Patent Pending. • Machining can be done on with the host vise. both vises in the same setup. • Pull type vise. Model Fits Jaw Max. Jaw Max. Clamp Adj. Range Weight Part No. Reg. • Vise is at an elevated position • AngLock® design. Number Vises Width Open Height Force (lbs.) of Workstop (lbs.) 1-5721- Net Price NOW! which is more conducive to • Has a stabilizer foot SDW25II 6" 2.5" 2.5" 1.06" 2,450 0-5" 20 -025 $384.80 $346.32 longer reach machining. for vibration control. SDW35 6" or 8" 3.47 3.75 1.235 4,000 0-5.75 45 -035 605.28 544.75

FEATURES: • 80,000 PSI ductile iron • DX6™ CrossOver™ vise is a body, nut & movable jaw. combination of AngLock®, Pull-Type • Repeatability within .001". DX6™ Crossover™ Vise and 4 bolt stationary jaw design. • Chip evacuation straight – AngLock® design reduces through the body. stress on body during clamping. • Large 9" jaw opening. – Pull-type design reduces • GrooveLock jaw plate stress on body during clamping. and workstop included. – 4 bolt design reduces stationary jaw • New brush seal design deflection & alleviates body stress. makes it easier to replace. • Bed height matched to size • Fits on D50-4-SA swivel base. 2.875" (73.025mm) ±.0005". • Hardened vise bed/jaw plates.

Max. Max. Model Jaw Jaw Jaw Vise Vise Clamping Weight Part No. Reg. No. Width Opening Depth Length Width Force (lbs.) (lbs.) 1-5721- Net Price SALE! DX6 6" 9.08" 1.735" 16.810" 7.391" 7,342 65 -DX6 $681.20 $579.02

1. Workstop assembly, suitable to use with 2"-6" jawplates. Part No. 1-5721-WSRL46 $ 78 GrooveLock™ Reg. Net Price $19.76 17 WSRL46 WSRLE46 Workstop 2. Extended length workstop Jaw Plates assembly, suitable to use with 4" & 6" jaw on outside. FEATURES: Part No. 1-5721-WSRLE46 $ 40 • Does not interfere Reg. Net Price $26.00 with part or spindle. 23 • Single bolt design for tightening workstop. 3. 6" groove-lock jaw plate 5. Replacement • Simple, functional, (not reversible). clamp assembly. integral workstop system. Part No. 1-5721-D60-315 $ 38 Part No. 1-5721-WSRL4686S $ 17 • Multiple parts can be located Reg. Net Price $42.64 38 Reg. Net Price $13.52 12 on the same jaw plate.

Compound Angle Plates Slide FEATURES: Table • Hardened to RC 58-62. • Ground flat, square & parallel within 0.0002". Part No. • Solid 1-piece steel construction for longer life. 8-400-310 Reg. Net Weight Part No. Reg. Price $199.00 Dimensions (lbs. - oz.) 1-814- Net Price NOW! SPECIFICATIONS: 3" x 3" x 4" x 1" 4.8 -105 $115.25 $97.96 $ 20 Table ...... 12" 4 x 4 x 4 x 1 7.8 -106 138.60 117.81 159 Height ...... 4-1/2" 4 x 4 x 6 x 1-1/4 10 -108 180.20 153.17 Travel ...... 6-1/2" longitudinal, A heavy, rugged slide used in all ...... 4-1/2" transverse kinds of positioning, milling, drilling, T-Slot Size ...... 9/16" microscope viewing and staging. Weight ...... 36 lbs. Soft Top Jaws American Standard For Bergman, Bison, Cushman, Huron, Rohm, Forkhardt, Pratt Burnerd America, SCA, SP, W&S, Nobel and Yuasa Tongue & Groove (A.S.T.G.) chucks. All Jaws are made from 1018 Mild Steel.

STANDARD HEIGHT Chuck H&R Part No. Reg. Net Size Reference # A B C D E F Bolt J 7-905- Price Ea. NOW! 6" HR-459-P 3-3/16" 1-5/8" 1-1/4" 5/16" 1/2" 1.50" 3/8" 1-11/16" -002 $24.81 $22.33 8 HR-450 3-1/2 1-5/8 1-1/4 5/16 1/2 1.75 3/8 1-5/8 -003 19.28 17.35 8 HR-462-P 3-15/16 1-5/8 1-1/4 5/16 1/2 1.75 3/8 2-1/4 -004 27.10 24.39 10 HR-452 4-1/4 1-7/8 1-1/2 1/2 3/4 2.12 1/2 1-15/16 -005 24.81 22.33 MEDIUM DUTY 10 HR-464-P 4-13/16 1-7/8 1-1/2 1/2 3/4 2.12 1/2 2-11/16 -006 32.15 28.94 12 HR-454 4-7/8 2-3/8 1-3/4 1/2 3/4 2.50 1/2 2-5/16 -007 27.56 24.80 1/8" TONGUE HEIGHT P=Pointed Jaw

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 11 WORK HOLDING 6 Pc. Quick Change Tool Post Set Mini Horizontal/Vertical Lathe Swing 10 to 15" Rotary Tables

All toolholders are More Information interchangeable @ KBCTools.com FEATURES: with Aloris type • Table clamping toolholders. surface are precision ground and cylindrical SET INCLUDES: center bore concentric. • Piston Type Tool • Dual position tables used for Post Series 200 (200). circular cutting, angle setting, • Turning & Facing boring & spot facing operations. Holder #1 (201). • Horizontal and vertical rotary • Boring, Turning & tables come with 360° graduations. Face Holder #2 (202). • Features dual positive action locks • Heavy-Duty Boring Bar with extra deep coolant channel. Indexing plate Holder #4 (204). • Complete with a pair of mounting clamps. not included. • Universal Parting Blade Holder (207). Center Worm Weight Part No. Reg. • Knurling, Turning Part No. 1-459-600 $ 50 Diameter Hole Ratio (lbs.) 1-397- Net Price NOW! & Facing Holder (210). Reg. Net Price $290.00 246 3" 1 MT 1:60 8.9 -5566 $157.50 $126.00 4 2 MT 1:72 14.5 -5561 225.00 180.00 Magnetic Adjustable Link

FOR WELDING AND HOLDING CAT40 V-Flange STEEL PLATES IN POSITION. End Mill

Holders Part No. Reg. Two heavy-duty Alnico magnetic blocks Bore Proj. Dia. 7-520- Net Price SALE! 2" long x 1" square, linked together with 1/8" 2.37" .69" -22907 $85.00 $72.25 two nickel plated bars with wing nuts for Part No. 1-397-375 $ 38 FEATURES: 3/16 2-1/2 .69 -22909 85.00 72.25 easy angle adjustment. Reg. Net Price $27.50 1/4 3 .78 -22911 85.00 72.25 23 • High precision 3/8 3 1 -22915 85.00 72.25 bore (H ) is 5 1/2 1-3/4 1-1/2 -22917175 85.00 72.25 best in industry. 1/2 2-1/2 1-1/4 -22917212 85.00 72.25 • Taper ground to 1/2 3 1-1/4 -22917 85.00 72.25 Demagnetizer AT3 for maximum 1/2 4.63 1-3/4 -22918 110.50 93.93 spindle contact. 5/8 1-3/4 1-1/2 -22919175 85.00 72.25 Table Size: 6-3/4" x 4-1/2" • Individually 3/4 1-3/4 1-3/4 -22921175 96.05 81.64 inspected, tested & 3/4 3 1-3/4 -229213 85.00 72.25 FEATURES: certified for accuracy. 1 1-3/4 2 -22925175 96.05 81.64 • Demagnetize dies, punches, • Balanced to 15,000 1 4 2 -22925 96.05 81.64 cutters or any tools that RPM at G6.3. 1-1/2 4-1/2 2-1/2 -22929 120.70 102.60 have become magnetized from any source. • Operates on 115V AC MOST with on/off switch. 4MT POPULAR LIVE CENTERS Part No. 8-604-002 Heavy Duty IN THE Reg. Net Price $77.30 Precision USA! $6571 Live Center FEATURES: • A heavy-duty ball thrust

bearing takes all axial thrust. O D Boring Head & Carbide d 60 Ø • The rotating spindle is extended Ø Tipped Boring Bar Sets right through the tapered shank.

With R8 Removable Shank • Complete protection of bearings l Mk from the ingress of coolant, L dirt and dust is provided by 3" Dia. Boring Head (1-1/2"-18 Mount) the built-in oil-seal, which also w/ 12 Pc. C-6 Boring Bar Set prevents loss of lubricant. SPECIFICATIONS: Part No. 1-800-923B $ 79 • Two specially designed adjustable D...... 2.17" needle-roller bearings carry all radial loads. d ...... 1.38" Reg. Net Price $193.10 173 L ...... 7.64" 12 PC. C-6 BORING BAR SET INCLUDES: MADE IN CZECH REPUBLIC l ...... 1.48" Taper ...... 4MT Shank Min. Bore Shank Min. Bore Max. Speed ...... 4,000 RPM Dia. Bore Depth Dia. Bore Depth Part No. 1-506-400 $ 18 Max. Workpiece Weight..... 1,800 lbs. 7/16" 1-1/4" 11/16" 1-7/8" Reg. Net Price $294.33 Net Weight of Center ...... 3 lbs. 7/16 1-11/16 11/16 2-13/16 250 3/4" 7/16 2-1/4 3/4" 11/16 3-3/4 9/16 1-1/2 13/16 2-1/4 9/16 2-1/4 13/16 3-3/8 9/16 3 13/16 4-1/2 3 Pc. Fly Cutter Sets With Wooden Stand 9 PC. C-6 BORING BAR SET INCLUDES: Shank Min. Bore JUNIOR SET 2" Dia. Boring Head Dia. Bore Depth 1/2" Shank (7/8"-20 Mount) 5/16" 3/4" Part No. 1-512-12 $ 80 w/ 9 Pc. C-6 5/16 1-1/8 Reg. Net Price $23.50 Boring Bar Set 5/16 1-1/2 18 7/16 1-1/8 Part No. 1/2" 7/16 1-11/16 SENIOR SET 1-800-922B 7/16 2-1/4 3/4" Shank 9/16 1-1/2 Reg. Net $ 01 9/16 2-1/4 Counter Part No. 1-512-34 $ 60 Price $137.79 124 9/16 3 balanced. Uses standard toolbits. Reg. Net Price $34.50 27

12 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com WORK HOLDING Chuck Stop Set

Designed to locate shorter parts beyond the chuck jaws to provide clearance for facing operations.

FEATURES: 3-Jaw Lathe • The chuck stop includes 10 sets of different height parallel bars to Chucks achieve the required spacing. Parallel Semi-Steel Body bar heights from 1/2" to 1-5/8" in 1/8" increments. 0.0002" parallelism accuracy. FEATURES: • A centering plug is used to keep the unit • High value centered to the ID of the chuck and strong & lower cost. neodymium magnets secure it to the face • Maximum .003" TIR of the chuck. The included centering plug using nominating pinion. diameters are 1.4", 2", 2-1/2", 3", 3-1/2", & 4". • .001" repeatability using • The chuck stop is 6" in diameter. For use nominating pinion. on 6" diameter chucks and larger. Series 342 • Hardened scroll. Medium Duty • Three hardened pinions. Supplied in a case. • 1 year warranty. Value Line Part No. 1-811-30000 $ 99 PLAIN BACK w/ 2-Piece Reversible Jaws Reg. Net Price $199.99 179 Chuck Weight Part No. Reg. Dia. (lbs.) 1-495- Net Price SALE! 5" 11 -0500 $290.00 $246.50 Standard 6 25 -0600 325.00 276.25 8 34 -0800 425.00 361.25 Drill Sleeves 10 55 -1000 525.00 446.25 Morse Morse FEATURES: Taper Taper Part No. Reg. • Hardened and Hole Outside 1-5142- Net Price NOW! precision ground 1 3 -010 $7.60 $6.46 for high concentricity. 2 3 -015 7.60 6.46 4-Jaw • Designed to be used 2 4 -025 13.15 11.18 Independent with taper shank 3 4 -030 13.15 11.18 tools, providing 3 5 -045 17.85 15.17 Lathe Chucks accurate alignment 4 5 -050 17.85 15.17 Semi-Steel Body between the members. 5 6 -060 46.30 39.36 FEATURES: • Made of cast iron. • The solid reversible Supra-SK E Keyless jaws and operation screw Drill Chuck are made of high quality carbon steel jaws and are Keyless self-tightening drill chuck suitable hardened precision ground. for percussion drilling on hand-operated power tools. PLAIN BACK w/ Solid Reversible Jaws FEATURES: • Robust design. Chuck Weight Part No. Reg. Stressed components made from steel. Dia. (lbs.) 6-318- Net Price SALE! • No throughhole. Chuck must be 6" 9 -004 $154.40 $131.24 tightened onto spindle with high torque. 8 32 -005 198.00 168.30 • Retention of the clamping force even 10 55 -010 217.50 184.88 when used under difficult conditions. • Lightweight design for powerful SPECIFICATIONS: cordless and corded power tools. Size Capacity...... 1/32-1/2" • Clamping and radial locking Thread Mount ...... 1/2"-20 possible in one single movement. 5" 5C Collet Part No. 1-507-1193005 $ 90 Chuck MADE IN GERMANY Reg. Net Price $81.00 72 FEATURES: • Forged steel chuck used for turning, facing, boring, 13 Pc. R8 Round grinding and milling operations. Collet Set • Designed for use with all 5C collets. • Maximum Speed: 6,000 RPM. FEATURES: • Made of high grade steel. • Internal Thread: 7/16"-20. • Hardened & precision ground. Sizes: 1/8" to 7/8" by 16ths Part No. 1-519-020 2 YEAR QUALITY AND MADE IN Reg. Net Price $93.25 PERFORMANCE WARRANTY POLAND $ 26 Part No. 3-862-0501P $ 34 79 Reg. Net Price $478.05 406

R8 Shank ER32 Collet Chuck R8 FEATURES: Collet • Round nut. Rack • Collet changes minimized due to large holding range of each collet. Hi-impact plastic holder accommodates • Concentricity guaranteed to 0.0004". 14 larger tool holders. Holds a full set • Exclusive self-releasing system reduces sticking. and emergency collets in an angled seat area - with a more secure hold. SPECIFICATIONS: Part No. Gage Length ...... 2.28" Model R8-52 Diameter ...... 1.97" 7-171-3008 Overall Length ...... 6-1/4" Reg. Net $ 36 Part No. 1-588-R852 $ 45 TOOLS NOT Drawbar Thread...... 7/16"-20 Price $143.95 122 Reg. Net Price $32.29 27 INCLUDED.

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 13 ABRASIVES Surface Grinding Flap Wheels Wheels Premium Aluminum Oxide PREMIUM WHITE White Aluminum Oxide 1/4" SHANK GRAIN FEATURES: FEATURES: 7" x 1/2" x 1-1/4" - 3,600 RPM • Premium quality aluminum • For grinding oxide on a flexible hardened tool steel. Part No. X-weight cotton backing • Porous composition Grit 1-704- ONLY! for long working life. resists wheel loading; 46-H -002 $14.40 • Use on ferrous and cooler, free grinding. 46-I -052 14.40 non-ferrous metals. • Best for grinding hard 46-J -082 14.40 • Flexible, yet strong materials or thin, heat- 46-K -112 14.40 flaps for easy working sensitive workpieces. 60-H -142 14.40 on hard-to-reach places. 60-I -174 14.40 Balanced • Fast and cool-cutting action. 60-J -206 14.40 Cool Cutting 60-K -238 14.40 Vitrified Face Max. Part No. Reg. fully 80-K -272 14.40 Bond Dia. Width RPM Grit 1-619- Net Price NOW! guaranteed 100-K -278 14.40 3/4" 3/4" 30,000 60 -71000 $2.15 $1.94 3/4 3/4 30,000 80 -71001 2.15 1.94 3/4 3/4 30,000 120 -71002 2.15 1.94 1 1 30,000 60 -71034 1.90 1.71 Bench & Pedestal 1 1 30,000 80 -71035 1.90 1.71 Grinding Wheels 1 1 30,000 120 -71036 1.90 1.71 1-1/2 1 25,000 60 -71041 2.45 2.21 Brown Aluminum Oxide 1-1/2 1 25,000 80 -71042 2.45 2.21 1-1/2 1 25,000 120 -71043 2.45 2.21 General purpose off-hand work. 2 1 25,000 60 -71089 2.70 2.43 2 1 25,000 80 -71090 2.70 2.43 Part No. 1-595- 2 1 25,000 120 -71091 2.70 2.43 Max. 24-Q 36-M 36-O 46-M 60-M 80-M Reg. Size RPM Grit Grit Grit Grit Grit Grit Net Price SALE! 6" x 3/4"x H 4,456 — -38007 — -38008 -38009 -38010 $14.10 $11.99 6 x 1 x H 4,456 — — -38012 -38013 -38014 -38015 16.25 13.81 7 x 1 x H 3,760 -38016 -38017 — -38018 -38019 -38020 19.25 16.36 8 x 1 x H4 3,600 -38021 — -38022 -38023 -38024 -38025 24.50 20.83

Grinding Wheels EXPANDED LISTING! Scotch-BriteTM SIGMA∑ GREEN is an aggressive grinding wheel manufactured Clean & Strip Disc with a specialty grain and bond combination resulting in a better Silicon Carbide finish. This is achieved by constructing SIGMA∑ GREEN with a FEATURES: layer of coarse grain and a second layer of finer grain. • Aggressive, coarse grade, open-web disc engineered to effectively clean welds, remove rust and strip paint. FEATURES: TYPE 27 • The open construction and aggressive • 36 Grit, fast stock removal. abrasive properties provide a smooth • Grinds smooth and quiet. running wheel that resists loading • Reduces labor rates. when removing soft coatings. • Controlled grinding. Max. Arbor Part No. • Max. RPM: 4,000 • Superior finish. Size RPM Hole 1-603- ONLY! • Cool cutting. Angle Grinder 4-1/2" 13,300 7/8" -045 $6.14 Extra Coarse 6" Dia. x 1/2" Hole • High performance grain. 13,300 5/8-11 -050 7.72 Part No. 1-630-00948 12,200 7/8 -053 7.98 • Minimizes operator fatigue. 5" Reg. Net Price $17.18 • For aluminum, stainless steel, 12,200 5/8-11 -054 9.53 8,500 7/8 -055 9.64 mild steel, hard face, titanium, alloys. 7" $ 60 • Won't discolor or warp stainless. 8,500 5/8-11 -060 11.26 14 2" Turn-On 1/4" SHANK SHUR-KUT® Quick Disc Holder Medium Density Change Discs Type "S" with Mandrel Part No. 1-613-11173 Type "S" Interchangeable with 3M Roloc TS discs, $ 34 Merit Type II Twist-On, Norton Speed-Lok. PREMIUM 6 ALUMINUM OXIDE FEATURES: SHUR-BRITE® Surface Type "S" • General purpose grinding aid Conditioning Discs and aggressive stock removal. Finish Duty (F.D.) products enable FD Quick Change Discs • Mold and the operator to prepare the work cavity grinding. piece with a required surface finish. APPLICATIONS: • Deburring, edge breaking, surface Equal to SocAtt®, • Blending ® ® FEATURES: • Deburring leveling. PowerLock II , & Roloc TSM • Added flexibility. • Scale Removal APPLICATIONS: Part No. ONLY! • Maintain a repeatable • Rust Removal Size Grit 1-613- (per disc) measured finish. • Stock Removal • Weld removal - 24 -11110 $.60 • Provides a consistent cut rate. • Weld Splatter Removal Use grits 36-60. • Blending of pits, 36 -11111 .58 Part No. Reg. 40 -11112 .56 gouges, & surface 50 -11113 .56 Size Grit Color 1-613- Net Price NOW! imperfections - 2" 100/box 60 -11114 .52 Coarse Brown -10544 $1.06 $.95 Use grits 80-120. 80 -11115 .52 2" Medium Red -10545 1.02 .92 • Achieve various 100 -11116 .52 50/box Very Fine Blue -10546 1.02 .92 STRONGER - QUICKER finish gradients - 120 -11117 .52 Super Fine Gray -38457 1.02 .92 RELIABLE - LONGEVITY Use grit 180. 180 -11119 .52

14 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com ABRASIVES Bench Stones For multiple types of work including CRYSTALON (Silicon Carbide) cleaning, deburring, & polishing. 1" Shop Rolls Combination Grit Part No. Reg. Premium silicon Grit 1-622- Net Price NOW! carbide abrasive. 50 YARD LENGTHS 40 -040 $17.05 $14.49 Fast cutting stone; ALUMINUM OXIDE 60 -060 15.25 12.96 ideal for general 80 -080 13.45 11.43 sharpening of cutting FEATURES: 100 -100 11.90 10.12 120 -120 11.40 9.69 tools. Fast stock 6" x 2" x 1" Coarse/Fine. • Material is easily removal for quick 150 -150 11.40 9.69 torn to the length 180 -180 11.40 9.69 edge sharpening Part No. 1-632-85450 $ 89 and/or shape needed. with minimal loading. Reg. Net Price $31.64 220 -220 11.40 9.69 26 • Flexible backing for 240 -240 11.40 9.69 longer working life. 320 -320 11.40 9.69 • High quality friable grain. 400 -400 11.40 9.69 Machine Knife Stone Offers both coarse and fine sides for sharpening and honing paper and cloth-cutting knives and planer BASTARD CUT knives on the machine. The groove 6 Pc. 4" American around the middle of the stone protects Pattern File Set fingers and provides a secure hold. 4" Dia. x 1-1/2" Thick. SET Six of the Most Popular INCLUDES (1 EA.): 4" Files Packaged Part No. 1-632-87570 $ 05 • Warding File. Reg. Net Price $43.59 in Plastic Pouch. 37 • Half-Round File. Part No. • Round File. • Hand File. 1-552-22062 ® • Square File. Reg. Net $ 87 SHUR-BRITE 6" x 9" • Slim-Taper File. Price $61.02 51 Stainless Finishing Hand Pad Mill Files BASTARD CUT FEATURES: • Designed to impart grain finish on FEATURES: stainless steel. • Two square edges. • Great to reorient • Single cut on edge and sides. scratch patterns. • File tapers toward the point for detail. • Cleans discoloration from stainless steel. Per Part No. Reg. Net • Removes residue. Size Box 1-552- Price Ea. SALE! • Blend tool marks. 6" 12 -08354 $6.36 $5.41 8 12 -08497 7.66 6.51 10 12 -08642 9.84 8.36 Part No. $ 50 12 6 -08737 16.06 13.65 1-613-40754 2

3 Pc. Diamond Four of the Most Popular Hone & Multi-Purpose Blades in Stone Set MultiBurr One Innovative Tool Set. FEATURES: • 3/4" x 2" diamond pat on a This handy universal deburring set 6" x 3/4" plastic handle. with multi-purpose blades will help • Very effective in hard to get places you produce a perfect finish for a wide variety of jobs. The four folding SET INCLUDES: shafts can be locked into position • (1) Super Fine - 1200. during use and then folded neatly • (1) Fine - 600. back into handle, allowing the tool • (1) Medium - 400. to be carried simply anywhere. Model RG1000 Part No. 1-457-400 Part No. 1-609-LPAK3 $ 70 SET INCLUDES: Reg. Net Price $16.12 13 • S10 Blade - Works best on steel, aluminum and plastic. Reg. Net Price $55.52 • D50 Scraper Blade - Ideal for tool and die makers. • N2 Blade - Works best on brass and cast iron. $ 86 • Rotodrive Countersink Blade - Range 1-10.4mm, 90° angle. 38

External Deburrer FEATURES: S Promo N Tele • Quickly repairs damaged threads on steel bolts Set Set including stainless steel and hardened steel, SET INCLUDES: SET INCLUDES: threaded rod, copper, • Grip 1 Handle • NogaGrip 3 Handle. brass, aluminum, • (10) S10 Blades • N Holder, plastics, and wood. (5) N1 Blades, • Works with most power drills Model NG8150 (5) N2 Blades. on materials ranging from Part No. 5/16-7/8" (8-22mm). 1-457-742 Model NG8300 • Made from hardened steel. Reg. Net Part No. Price $11.75 1-457-552 Part No. 1-909-51950 Deburrs steel, Reg. Net Price $42.85 $ 99 Reg. Net $ 26 aluminum, plastic, 9 Deburrs steel, aluminum & plastic. Price $13.25 11 brass and cast iron. $3428

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 15 MEASURING & INSPECTION 6" Precision Dial Caliper Shockproof Dial Calipers With Thumb Roll with Thumb Roll

Supplied in a shop-hardened case. Part No. FEATURES: • Revolution: .100" 8-100-006 • Easily used, accurate - Reg. Net read directly to .001" Price $33.00 on large clear dial. Supplied in a • 4-way measurement. plastic case. $ 95 • Stainless steel with satin chrome finish. Range: 0-6" FEATURES: 24 • Stainless Steel. Part No. 1-815-105 $ 46 • 4-Way measuring. Reg. Net Price $49.95 42 • Tough shockproof design. • .001" (.02mm) reading dial face. 6" Fractional Electronic Caliper Range: 0-12" • .100" (2mm) range per revolution. Part No. 1-815-115 • Silky smooth movement throughout. $ 54 • Accuracy/Resolution/Grad.: .001" Reg. Net Price $92.40 78 • 1 Year Warranty.

Economy Digital Calipers Range: 0-6" (0-150mm) FEATURES: • SPC output. Part No. 1-812-650 • ON/OFF Button, inch/mm Reg. Net Price $44.95 conversion, and Zero Set • Resolution: .0005" (.01mm) FEATURES: $ 95 • Fractions by 1/64" increments. • Direct inch/metric • Resolution: 29 • Auto OFF after 4 mins. of inactivity. conversion. .0005" (.01mm) • Stainless steel frame. • ABS/INC • Large easy-to-read measurement. LCD display. • Includes molded case. • Patented ceramic IP54 Large Display capacitive sensor. Electronic Calipers Jaw Length Part No. Reg. INCH - METRIC - FRACTIONAL Range External Internal Thickness 54-100- Net Price SALE! 0-4" (0-100mm) 1.56" .635" .117" -001 $103.85 $83.08 0-6" (0-150mm) 1.56 .635 .117 -000 118.75 95.00 0-8" (0-200mm) 1.955 .700 .125 -008 153.00 122.40 0-12" (0-300mm) 2.40 .930 .125 -112 185.39 148.31

Poly-CalTM Electronic Caliper

FEATURES: Range: 0-6" (0-150mm) • Resolution: .0005" Part No. 1-815-100 $ 46 (.01mm / 1/128" fractional). Reg. Net Price $49.95 37 • Hardened stainless steel body. FEATURES: • Precision lapped finish for • Resolution: .0005" (.01mm) smooth travel. Range: 0-12" (0-300mm) • Fractions by 1/64" increments. • IP54 - Splash water, oil, and • Accuracy: +/-.008" dust resistant. Part No.1-815-120 $ 00 Reg. Net Price $108.00 • Polycarbonate frame. • 1 Year Warranty. 81 • 4-way measurement. Range: 0-6" (0-150mm) • Large easy-to-read display. Part No. 54-101-175 • Absolute/incremental measurement. $ 51 • Direct inch/metric/fraction conversion. ABSOLUTE Reg. Net Price $25.30 21 • Supplied with clip-on vinyl pouch. Digimatic Caliper Series 500 - With SPC Output Electronic Calipers

Range: 0-8" (0-200mm) Part No. 1-808-500172 FEATURES: Reg. Net Price $248.00 • Internal Measuring Nibs: .500" • RS232C Direct output. • Resolution: .0005" (.01mm) • All sizes feature fine $ 80 • Preset mode now includes adjustment screw. FEATURES: 210 offset for inside jaws. • Hold feature. • Resolution: .0005" (.01mm) • Inch/metric conversion. • Includes wooden case. • Large and clear LCD readout. • The ZERO/ABS key allows the display to be Zero-Set at any slider Jaw Part No. Reg. position along the scale for incremental comparison measurements. This Range Depth 54-100- Net Price SALE! switch will also allow return to the absolute (ABS) coordinate and display 0-12" (0-300mm) 3.5" -312 $213.90 $181.82 of the true position from the origin point (usually jaws-closed point). 0-24" (0-600mm) 4 -024 325.00 276.25 • Thumb roller included. 0-40" (0-1000mm) 4.9 -042 995.00 845.75 • Supplied in fitted case.

16 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MEASURING & INSPECTION ­3" Feeler Precision Gages Radius Gage with Handle FEATURES: • Number of Blades: 26 • Blades made of finest feeler gage FEATURES: stock, hardened and tempered. • Range: 1/64" - 17/64" by 64ths • Each blade marked with thickness. & 9/32" to 1/2" by 32nds. • Steel case protects blades. • Number of Gages: 25 Tool No. RG1 • Lock nut holds blades • Satin chrome finish. Part No. securely in place. Straight Tapered • Five measuring surfaces for 8-410-009 THICKNESSES 1/2" Wide At Tip 1/4" Wide At Tip both convex and concave radii. • Designed for checking or laying Reg. Net INCLUDED: Part No. 1-804-519 Part No. 1-804-520 Price $33.00 .0015, .002, .0025, .003, .004, out concave or convex radii. Reg. Net Reg. Net • Used for inspection, layout, .005, .006, .007, .008, .009, Price $18.94 Price $18.94 $ 40 .010, .011, .012, .013, .014, pattern making and all 26 .015, .016, .017, .018, .019, $ 10 $ 10 other machining jobs. .020, .021, .022, .023, .024, .025" • Each gage is marked 16 16 clearly with its size. Supplied in a fitted case.

Dial Bore Gages Screw Pitch Gages Series 511 w/ 2923SB-10 Indicator

FEATURES: FEATURES: • Interchangeable anvils and necessary • 28 Blades included are both V, American accessories to perform close National & U.S. Standard 60O threads. tolerance I.D. measurements. • Narrow leaf blade for internal and external thread. • A Digimatic Indicator can be attached • Locking device at each end secures blades. in place of the dial gage. • Each blade clearly marked with proper thread size. • Accuracy: .0002" (5µm) • Carbide ball contact No. Of Part No. Reg. point for durability. INDICATOR FEATURES: Type Groups Blades Included 1-804- Net Price SALE! • Optional extension Range: .05" rods can be attached. Graduation: .0001" 1. 4, 4-1/2, 5, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 16 inch -511 $21.98 $18.68 Dial Reading: 0-5-0 English 2 2. 18, 20, 24, 27, 28, 32, 36, 40, 44, 48, 56, 64, 72, 80 inch No. of No. of Probe Part No. Reg. English/ 2 1. 4, 6, 8, 10, 11, 11-1/2, 12, 13, 16, 20, 28, 32, 40, 58 inch -513 21.98 18.68 Range Anvils Spacers Depth 1-808- Net Price SALE! Metric 2. .5, .75, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 6 mm 2.0-6.0" 11 4 6" -511753 $451.00 $383.35 Metric 2 1. .25, .3, .35, .4, .45, .5, .55, .6, .65, .7, .75, .8, .85, .9 mm -515 21.98 18.68 6.5-10.0 6 7 10 -511755 672.00 571.20 2. 1, 1.1, 1.2, 1.25, 1.3, 1.4, 1.5, 1.6, 1.7, 1.75, 1.8, 1.9, 2, 2.5 mm

IP54 ABSOLUTE Electronic Digital Bore Gage Set Extended Range Set With SPC Output

SET INCLUDES: • (3) Interchangeable Measuring Heads: - 0.7 to 1.5", 1.5 to 2", 2 to 6". FEATURES: • (3) Sets of Anvils with Carbide Points: • Extended Range Set from 0.7-6". - 0.7, 0.8, 0.9, 1, 1.1, 1.2, 1.3, 1.4" • Absolute Electronic Indicator: Replacement Battery - 1.4, 1.6, 1.8, 2" Range: 0-0.5" (0-12.7mm). 3-Volt Type CR2032 - 2, 2.2, 2.4, 2.8, 3, 3.2, 3.4, 3.6, 3.8, 4". Resolution: .00005" (.001mm). Part No. 1-541-358 • (1) 2" Extender. • Indicator is fully protected $2.48 • (3) Spacers/Washers: 0.02, 0.05, 0.1". by rugged cover IP54 rated. • Extended 2 Year Warranty. Part No. 1-815-405 $ 25 Supplied in a fitted plastic case. Reg. Net Price $259.00 194

Economy 81 Pc. Grade "B" Gage Pin Sets Rectangular Class ZZ Gage Block Set Supplied in high-quality FEATURES: fitted wooden case. • Measuring Range: Part No. - .100-12 in Steps of .001" 1-855-99923 - .200-12 in Steps of .0001" • Tolerance of ±50 µ in. Reg. Net • Etched, unique serial numbers Price $495.00 FEATURES: are included on each block. $ 75 • Uniform 2" length. • Includes a certificate of calibration*. • All gages within 0.0002". 420 • Sizes marked on storage case. SET INCLUDES: • Smooth finish 10 micro or better. • (9) Blocks .1001" - .1009" (Steps of .0001") • A must for checking hole diameter and • (49) Blocks .101" - .149" (Steps of .001") distance between holes and hole location. • (19) Blocks .05" - .95" (Steps of .05") • Heat treated to a hardness of 60/62 RC. • (4) Blocks 1" - 4" (Steps of 1")

Plus Minus * Calibration performed at Webber Gage in Cleveland, OH. Certificate Gage No. of Part No. Part No. Reg. of Calibration with NVLAP accreditation. Calibration in accordance Range Pieces 1-812- 1-812- Net Price SALE! with ISO 17025 with dated calibration certificate and NIST traceability number. Uncertainty of measurement (k=2): µ = 6+L where L is in .011-0.060" 50 -579 -580 $31.45 $25.16 inches, but µ not less than 7 µ in. .061-0.250 190 -589 -590 69.50 55.60 .251-0.500 250 -594 -595 112.35 89.88

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 17 MEASURING & INSPECTION 0-1" Dial Indicator MACHINIST’S MATE Continuous Dial, Jeweled with Lug Back Electronic Edge FEATURES: Finder • Satin-finish chrome plated • Contact point is made of FEATURES: forged brass case. hardened, ground and chrome • Finder lights up instantly • Precision ground hard plated tool steel. when stylus .200" dia. x 1/2" chrome plated stem. • Spindle rack, pinions and pivots length reaches the work edge. • Exact reading off any electrically Self-Contained Visual • Accuracy meets Federal of hardened stainless steel. For Machine Set-Up. Specifications. conductive metal with clean surface. • 1/2" dia. shank, 3-15/16" length. AGD Group 2 • Accurate to within .0005". Part No. 1-275-98315 SPECIFICATIONS: Part No. 1-808-2416S10 • Includes: (1) "AAA" Alkaline Battery, $ 83 Per Revolution ...... 10" Reg. Net Price $145.00 (1) Bulb in protective tube. Reg. Net Price $26.86 22 Graduation ...... 0010" Dial Reading ...... 0-100 $ 25 Dial Face Diameter:...... 2-1/4" 123 Water Resistant Indicator Set ABSOLUTE Digimatic IP54 X -PROOF INDICATOR FEATURES: ID-SX Indicator • Travel: 1". Series 543 - Simple Design • Reading: .001" • Sealed back plate. FEATURES: • Tolerance markers. • Dust/water protection level:IP42. • Rubber bellows on stem. • After the initial zero-setting with the ORIGIN • AGD Group 2, 2-1/4" dia. button, the repeated absolute positioning is • O-Ring seal on safety cap. no longer necessary over the entire battery life. • Lug back and carbide point. • Employing the ABSOLUTE linear encoder, • Robust, shockproof design. the ID-S always displays the spindle "Absolute • O-Ring protection Position" from the origin at power-on. Also, for bezel & rotating dial. unlimited response speed eliminates over-speed errors. • Continuous Reading: 0-100. • As compact as standard Series 2 dial indicators. • One battery (SR44) provides approx. 20,000 hrs. MAGNETIC BASE FEATURES: of continuous use. • 85 lb. pull. • Fine adjustment. SPC OUTPUT, STEM DIA. 3/8", #4-48 UNF THREAD, LUG BACK • V-base for placing Meas. Part No. Reg on round surfaces. Range Resolution Accuracy Force 1-808- Net Price SALE! • Also mounts test indicators with 1/4" post. 0-.5" (0-12.7mm) .0005" (.01mm) .0010" 1.5N -543783 $182.00 $154.70 or less • Base Dimensions: 2" x 2-11/32" x 1-13/16" • On/off lever release magnet.

"QUICK-SET" Part No. 52-585-155 $ 06 All packed in a Horizontal Dial Reg. Net Price $85.08 68 shop-hardened case! Test Indicator Series 513 IP65 Extended The most direct gear train design ever applied to test Range Test indicators means higher level of sensitivity, reliability, repeatability and accuracy throughout tool life. Indicator INCLUDES: FEATURES: FULL SET INCLUDES: • (2) Dovetail Stems. • Anti-magnetic. • Indicator • (3) Tungsten Carbide Part No. 1-815-355 • Jeweled bearings. • Holding Bar Points: .080", .040", .120". Reg. Net • No-clutch structure. • Knurled Clamp Ring • 1 Year Warranty. • Water and dust resistant. • (3) Carbide Contact Price $80.00 • Glare-free crystal with Points: .039", .079" .118" scratch-resistant coating. • Swivel Clamp For: .157" & 3/8" FEATURES: $ 00 • (2) Stems: .157" & 3/8" • Automatic reversal. 64 • Revolution counter. SPECIFICATIONS: • Jeweled movement. Range ...... 030" • Easy-to-read tilted dial. SPECIFICATIONS: Part No. 1-808-513402T Range ...... 060" Graduation ...... 0001" $ 15 • IP65 Protective Rating. o Dial Reading ...... 0-15-0 Reg. Net Price $159.00 135 Swivel Arc ...... 210 Supplied with a molded case. Dial Reading ...... 0-15-0 Horizontal Dial Test Indicator Set Universal Test Indicator Holder with KBC Dial Test Indicator

NOGA HOLDER FEATURES: SET INCLUDES: • Test indicator holder arm. • Test Indicator. • Holds indicators with • Height Gage Bar. 3/8" stem or dovetail. • (2) Contact Points. • Most useful for centering • Contact Point Wrench. holes on milling machine. • Universal Dovetail Clamp. • Dovetail Stems: 3/8" & 1/4" KBC HORIZONTAL • Supplied in fitted plastic case. DIAL TEST INDICATOR MODEL NF1018 FEATURES: (Part No. 8-100-055) • .030" Range, White Face • 1-3/16" dial face. SPECIFICATIONS: White Face Range ...... 030" • Graduation: .0005" Graduation ...... 0005" Part No. 8-100-4707 $ 72 • Dial Reading: 0-15-0 Part No. 1-457-908F Dial Reading ...... 0-15-0 Reg. Net Price $53.40 • Supplied with 2 stems $ 60 42 (5/32" & 3/8"). Reg. Net Price $94.50 75

18 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MEASURING & INSPECTION IP65 Absolute Probe Indicators Edge & Center Finders with Remote Readout Single Head Type

FEATURES: FEATURES: • Accurately locate working • IP65 rating edges, shoulders, grooves, • Resolution: 0.00005"/0.001mm center points, and scribed lines. • Easy to read large • Time-saving positioning Remote access LCD display. tools for jig borers, milling • Spring load movement and other machines. with a push button. Tip Part No. Reg. • Indicator can be flat or Part No. Reg. • Hardened and Range Accuracy 1-815- Net Price SALE! centerless ground to Shank Dia. 1-805- Net Price SALE! lug back with included parts. • Standard 4-48 thread precision tolerance. 1/2" 1/2" -260 $16.38 $13.92 0-1" (0-25.4mm) .00020" -495 $151.00 $120.80 • All sizes are 3" long. 3/8" .2000" -263 17.19 14.61 with ceramic contact point. 0-2" (0-50.8mm) .00035 -501 211.00 168.80 • (2) 3V CR 2032 battery. 0-4" (0-100.6mm) .00040 -505 249.00 199.20

Fat & Fab Double Thread Detective® Thread Identifier Fine Adjustment Standard Combination Unit FEATURES: Precise & • Five axis holder. FEATURES: easy-to-use • Double Fine Adjustment: • Distinguish inch & metric threads. - Top: Universal Swivel Clamp • 6-32 to 1/2"-20 inch and M4x0.7 to M12x1.75 for nuts - Bottom: Unique Single Direction metric steel indentifiers on a wire lanyard. and bolts. • Powerful ON/OFF magnetic base (176 lbs./ft.). • Shatterproof, color coded gauge dividers. • Holds 6mm, 8mm, 3/8", dovetail and back lug. • Easy-to-read size markings laser • Instant fixation in any position. etched on each stand off. • Fast and easy to set up gauges into required position. • Unique central locking mechanism with Part No. 1-842-405 $ 18 NOGA designed spring loaded bearing. Reg. Net Price $41.39 • Black finished arms. 35 SPECIFICATIONS: Bottom Arm ...... 4.33" Top Arm ...... 3.98" Machinists’ Improved Levels Model No. DG6160 Series 98 with Ground & Graduated Vials Part No. 1-457-917 $ 11 FEATURES: Reg. Net Price $132.15 99 • Ground and graduated main vials. • Adjustable to a positive setting. • Base of the levels feature an involute groove running the Universal length of base, providing a reliable seat for round work. Adjustment Arm • With the cross test level, it’s with Magnetic Base possible to simultaneously level in both directions. FEATURES: • Case not included. • Easy on/off switch. • Magnetic base with Size 125 lbs. of pulling power. Starrett Part No. Reg. • Strong central locking mechanism. Part No. Inch mm Description No. 1-855- Net Price SALE! • Fine adjustment universal swivel clamp. 1-815-245 6" 150 With Cross Test Vial 98-6 -50441 $140.00 $119.00 • Anti-corrosive universal chrome arms. With Ground Single Plumb Vial • Adjustable arms with easy positioning Reg. Net 12 300 and Cross Test Vial 98-12 -50443 241.00 204.85 to retain required position. Price $42.50 • Holds 3/8" stem and dovetail (holds both ADG and test indicators). $ 95 • Top arm: 4.8", bottom arm: 5.8". 34 4 Pc. 12" Combination Series 9 • Total Reachable Length: 14". Square Set FEATURES: • With reversible lock bolts, Electronic scriber, spirit level in both Height Gage square head and protractor head, direct reading FEATURES: double 180O protractor • Range: 0-6" (0-150mm) • Manual on/off with auto scale, hardened steel, • Resolution: .0005" (.01mm) off after 5 min. of non-use. machine-divided blade. • Linear Accuracy: ±.001" • Scriber can reference zero Cast iron heads with black wrinkle finish. (±.02mm) from the base bottom. • Square head, center head and non- • Easy-to-read LCD with • Long life hardened, reversible protractor head and blade. .32" high characters. stainless steel bar. Starrett #9-12-4R • Rounded nose scriber • Slide lock and fine GRADUATIONS: cuts clean, sharp lines. adjustment thumb roll. Part No. 1-855-50042 $ 75 No. 4R - 8ths, 16ths, • Inch/millimeter conversion • Hardened, ground, Reg. Net Price $235.00 Quick Reading 32nds, 64ths and zero at any position. and lapped base. 199 Starrett #3751AZ Part No. 1-855-12221 $ 70 Supplied in Full Flexible Steel Rules Reg. Net Price $302.00 256 a case. Series 182

Center GRADUATIONS: Gage 16R: 32nds, 64ths, 50ths & 100ths Made of tempered steel Series 950 M2: 50ths, 100ths, 1mm &1/2mm and satin-chrome finish. M5: 1mm, 1/2mm, 1mm & 1/2mm Extremely durable for FEATURES: everyday use. Graduations • Hardened with lapped edges and notches. Part No. 1-808-950201 Part No. Reg. are marked on glare-free • Meets requirements of the American Reg. Net Price $16.25 Size (Grad.) Width 1-808- Net Price SALE! satin-chrome surface, National and US 60° Standards. 6"x 150mm (M2) 1/2" -182206 $14.25 $12.11 and deeply photoengraved • Scales with 14ths and 20ths graduations provided $ 81 150mm (M5) 1/2 -182211 22.15 18.83 for longer tool life. on one side, 24ths and 32nds on reverse side. 13 12" (16R) 1/2 -182222 28.15 23.93 Thickness: 1/64".

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 19 MEASURING & INSPECTION V-Blocks Set 10X LED Measuring with Clamps Magnifier Loupe FEATURES: LED LIGHT • Chrome & hardened steel. FEATURES: • Ground to 0.0005". • Adjustable focus. • Parallel on all sides. • Distortion free • Supplied complete with with fine resolution. zinc die cast clamps. • Seven powerful LED • 90O V with 45O even on lights with an on/off switch. each side. • Super high precision laser etched angle and length glass scales. SET INCLUDES: Part No. 1-815-700 • (1) "AG9" Battery included. • (2) 1-1/2 x 1-1/2 x 1-1/4" • (2) 2" x 1-1/2 x 1-1/2" Reg. Net Price $91.90 SPECIFICATIONS: • Compltete with heavy duty Viewing Area ...... 1-1/4" fitted case. $ 93 Reticle Diameter...... 34mm 68

Part No. 1-815-610 $ 50 Supplied with a Reg. Net Price $62.00 46 protective padded leather case. For Tire Tread Wear QuickCheck Electronic Measurement Supplied in a vinyl holster. Snap Thickness Gage FEATURES: FEATURES: • Super-large display. • Easy to read large LCD display. • Fractions in 1/64" increments. • Hold function. • Resolution: .0005" (.01mm) • Range: 1" (25mm) • Spring load movement with a push button. Part No. 54-225-500 • Perfect handhold design for easy usage. • Spring-loaded and hold measurement $ 95 • Interchangeable measuring anvils button for ease-of-use. Reg. Net Price $24.65 20 (includes 2 flat anvils & 1 ball anvil).

SPECIFICATIONS: 1-2-3 Block Range...... 0-1" Pairs Reading...... 0-1"/ .01mm/1/64ths Accuracy ...... ±0.0015" FEATURES: Battery...... 3V CR 2032 • Parallelism: ±.0002" • Precision ground and hardened on all sides. Part No. 1-815-605 $ 96 • Hardness HRC 56-60. Reg. Net Price $39.95 33 • Ideal for mounting work for precision grinding and layout. YOUR CHOICE $ 95 Magnetic Digital 12 1" x 2" x 3" Angle Protractor w/ 1 Hole Per Block Part No. 1-806-003H

FEATURES: 1" x 2" x 3" • Large LCD display. w/ 23 Holes Per Block. • Reversible reading. Five 3/8"-16 Tapped Holes • 3-side magnets Part No. 1-806-003T (bottom & 2 side walls). • Precision digital level sensor. • Hold and ZERO functions. • (1) 9V Battery Included. Toolmakers 3 Pc. Toolmakers’ • 1 Year Warranty. Surface 6" Spring Dividers SPECIFICATIONS: Gage & Calipers Set Part No. 1-815-200 Measuring Range ...... 360° (4 x 90°) With Reg. Net Price $48.75 Resolution...... 05° 9" & 12" Accuracy ...... ±.2° Spindles $ 56 Repeatability ...... 1° 36 Dimensions ...... 2.2" x 2.2" x 1.2" Part No. 1-397-121 Reg. Net Price $33.75 IP66 Electric Digital $ 00 Tool Setting Gage 27

FEATURES: • Range: 1/2" FEATURES: • Accuracy: ±.0015" • Solid nut and washer • Repeatability: ±.0001" FEATURES: permits fast and positive adjustment. • IP66 Protective Reading. • Bottom • Heat treated points to give • Alert back lite will light-up grooved for accurate measurement. when setting to zero. cylindrical work. • Spring is hardened & tempered. • 5 strong magnets on base. • Base has 2 • Legs are well finished & balanced. • Resolution: .00005" (.001mm). retractable • All dividers and calipers are made • Uses CR2032 gage pins to set of high grade polished steel. replacement battery. against edge of a surface plate. Part No. 1-812-106 Supplied in a strong Part No. 1-815-215 $ 75 • Has fine adjustment. Reg. Net Price $12.90 protective case. Reg. Net Price $85.00 63 • Front recessed for depressing spindle below base level. $ 97 • Base & scriber hardened. 10

20 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MEASURING & INSPECTION IP65 Twin-Force 0-1" Coolant Proof Digital Micrometer Digimatic Micrometer Series 293 - with FEATURES: Ratchet Stop • Range: 0- 1"/0-25mm. • Resolution: 0.00005"/0.001mm. • Accuracy: ±0.00015". • IP65 Water & Dust Protective Reading. Part No. • TwinForce Movements: Friction and Ratchet. 1-808-293340 • Black anodized friction tube for easy Reg. Net grip and easy clean. Price $193.00 • Micro USB data output. • Ball attachment included. $ 05 • Protective case included. • (1) 3V CR 2032 battery. 164

Part No. 1-815-531 $ 92 FEATURES: Reg. Net Price $99.90 79 • Range: 0-1" (0-25mm) • IP65 protection level, enabling • Graduation: .00005" (.001mm) use in environments exposed • Auto power ON/OFF function. to cutting oil, etc. Anti-corrosion • Measurement data output treatment is required after use. Economy function is available with a water- • Certificate of inspection included. Micrometers resistant connection cable. • Supplied in fitted plastic case. FEATURES: • Carbide measuring faces. • Sizes over 1" include standard. • .0001" reading microfine graduations. • Meets or exceeds Federal specifications. • Ratchet thimble and locking nut. 0-3" Outside • Complete in case. Micrometer Set Series 103 Part No. Reg. Range 52-229- Net Price SALE! 0-1" -201 $40.00 $34.00 FEATURES: 1-2 -202 49.40 41.99 • Carbide faces. 2-3 -203 62.15 52.83 • Baked-enamel finished frame. • Ratchet stop or friction 0-3" Set thimble for exact Set Includes Part No. 52-229-213 $ 81 repetitive readings. Mitutoyo Part No. Reg Reg. Net Price $143.30 121 • Clear graduations Range Grad. No. Remarks 1-808- Net Price SALE! on satin-chrome finish. 0-1" .0001" 103135 Friction • Positive locking clamp. 1-2 .0001 103136 Thimble Ratchet -103922 $444.00 $377.40 Supplied with a 2-3 .0001 103217 Stop w/ Electronic Depth fitted carrying case. Standard Micrometer Individual Outside Series 103 Part No. Inch Micrometer 54-225-456 FEATURES: Reg. Net • Range: 0-1" FEATURES: Price $230.00 • Graduation: .0001" • Large LCD display. • Remarks: Friction Thimble. • Direct RS232 output. $ 50 • Carbide faces. • Rod Diameter: 0.176" 195 • Positive locking clamp. Part No. 1-808-103135 • Automatic switch OFF. • Friction thimble for exact Reg. Net Price $123.00 • Range: 0-6" (0-150mm) repetitive readings. • Resolution: .00005" (.001mm) • Baked-enamel-finished frame. $ 55 • Protected to IP54 Standards. • Complete with fitted carrying case. 104 • 4" Base: Hardened tool steel, • Clear graduations on satin-chrome finish. precision ground & microlapped. • Uses (1) SR44 battery.

Depth Micrometers 6 Pc. Telescoping Series 129 - Interchangeable Gage Set Rod Type

FEATURES: • Satin chrome finish. Supplied • Plungers are locked with at any desired setting. fitted case. • Measures the true size of holes, slots, & recesses from 5/16"-6". FEATURES: • Contact ends are hardened and • Satin-chromed .157" diameter interchangeable rods, with radius ground providing clearance finished throughout. lapped measuring end, are calibrated and for insertion into a smaller hole. • Ratchet stop for consistent & tested at the factory. Rods are adjustable • Locking mechanism consists of a repetitive measurements. length, to compensate wear on the measuring tip, with 2 supplied wrenches. knurled screw at the end of the handle. • Crisp, clear graduations • Contact plungers automatically self on the thimble. center at all times and in all positions.

Base Part No. Reg. Range: 5/16" to 6" Range Grad. Length Remarks 1-808- Net Price SALE! Part No. 1-804-508 w/ Interchangeable -129131 $213.00 $181.05 $ 22 0-4" .001" 2.5" Rods: 4 pcs. Reg. Net Price $101.44 86 w/ Interchangeable 0-6 .001 2.5 Rods: 6 pcs. -129132 249.00 211.65

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 21 TOOLROOM ACCESSORIES Industrial FEATURES: • Steel screw, swivel and handle. C-Clamps • Drop-forged steel frame. Horizontal Manufacturers of • Conform to U.S. Gov’t specs. Quality "C" Clamps! • Copper plated screw. Clamp

Throat Screw Approx. Part No. Reg. Capacity Depth Dia. Wgt. (lbs.) 1-532- Net Price SALE! 0-2" 2" 1/2" 1-1/4 -402 $28.39 $24.13 0-3 2-3/8 1/2 2 -403 35.77 30.40 0-4 2-3/4 3/4 3-1/2 -404 45.85 38.97 0-6 3-5/8 3/4 5 -406 58.45 49.68 0-8 4-1/2 3/4 7 -408 86.28 73.34 SUPPLIED WITH SPINDLE ASSEMBLY. High Visibility Safety Clamps FEATURES: • Most suitable for holding down sheet metal or circuit boards. FEATURES: Series 400CS • Many spindle bar and base combination • Drop forged frame c-clamp with an anti-spatter, copper available to suit your application. Regular Duty plated spindle, swivel pad, and cross-pin handle. Extra Deep Throat • Acme roll spindle threads provide user Height Holding Drop Forged with maximum strength and clamping force. Under Overall Capacity Part No. Reg. Base Length (lbs.) 1-990- Net Price NOW! Throat Spindle Min. Proof Ship Wgt. Part No. Reg. Capacity Depth Diameter Test (lbs.) (lbs.) 1-550- Net Price SALE! 5/16" 3-1/16" 60 -201* $5.97 $5.07 3/8 3-3/16 60 -201A** 5.97 5.07 0 - 2" 2" 1/2" 3,500 1-1/2 -H402CS $15.68 $13.33 1 5-7/16 200 -201B* 8.14 6.92 0 - 3 2-3/8 5/8 3,500 1-3/4 -H403CS 21.99 18.69 1-3/8 6-19/32 500 -225D* 10.08 8.57 0 - 4 2-3/4 3/4 6,500 2-3/4 -H404CS 29.99 25.49 1-3/4 10-3/8 750 -20235* 14.80 12.58 0 - 6 3-5/8 3/4 6,900 4-3/4 -H406CS 46.99 39.94 0 - 8 4-1/2 3/4 6,900 8-1/2 -H408CS 58.99 50.14 * U-Bar, Flanged Base ** Fixed Bar, Flanged Base 0 - 10 5-3/8 7/8 8,000 10-1/2 -H4010CS 83.08 70.62 0 - 12 5-3/4 7/8 9,500 14 -H4012CS 135.99 115.59

This handy shim stock comes ready packaged in dispenser cartons for easy use. Packaged Shim Saves time, waste, and bother. Precision-gauged for accuracy. Stock 15 Pc. 6" x 12" 6" x 100" Brass Rolls Packaged Part No. Reg. Shim Stock Thickness 1-953- Net Price NOW! .001" -S1 $24.70 $21.00 Brass Shim Stock .0015 -S1X 24.80 21.08 Sizes (1 Each): .001", .0015", .002", .002 -S2 25.60 21.76 .003", .004", .005", .006", .007", .008", .003 -S3 26.40 22.44 .004 -S4 27.85 23.67 .010", .012", .015", .020", .025", .031" .005 -S5 28.80 24.48 Part No. 1-953-SF15 $ 93 .006 -S6 29.65 25.20 Reg. Net Price $68.15 .007 -S7 31.10 26.44 57 .008 -S8 32.80 27.88 .009 -S9 35.25 29.96 Steel Shim Stock .010 -S10 38.35 32.60 Sizes (1 Each): .001", .0015", .002", .003", .004", .012 -S12 41.55 35.32 A half hard, cold rolled, .005", .006", .007", .008", .010", .012", .015", .015 -S15 47.95 40.76 .020 -S20 54.20 46.07 260 Alloy Branded™ shim. Part No. 1-955-AF15 $ 36 .025 -S25 64.75 55.04 Reg. Net Price $61.60 52 More Info. @ KBCTools.com .031 -S31 76.60 65.11 More Info. @ KBCTools.com

FEATURES: 0-1 Oil Hardening • Thickness: ±.001" • Width: + .000/.005" Precision • Soft, ready to machine. • Quality oil hardening, non-distorting alloy steel. Ground Nominal Analysis Carbon ...... 90 18" Part No. 36" Part No. 1-951- 1-965- Flatstock FOR KBC’S EXTENSIVE LISTING OF Chromium ...... 50 Part FLAT STOCK VISIT: KBCTOOLS.COM Manganese .... 1.20 Thickness Width No. ONLY! ONLY! Packed Individually. Tungsten ...... 50 5/16" -256 $21.40 $41.97 Vanadium ...... 20 1/2 -258 20.49 39.65 3/4 -260 24.86 47.31 18" Part No. 36" Part No. 1 -262 29.08 54.91 1-951- 1-965- 18" Part No. 36" Part No. 5/16" 1-1/4 -264 33.02 61.86 Part 1-951- 1-965- 1-1/2 -266 37.31 69.57 Thickness Width No. ONLY! ONLY! Part 2 -268 45.83 84.74 3/8" -638 $12.57 $31.62 Thickness Width No. ONLY! ONLY! 2-1/2 -270 54.38 99.95 1/2 -054 7.89 15.45 3/16" -168 $20.65 $56.28 3 -272 62.92 115.08 3/4 -056 10.07 19.62 1/2 -170 15.09 28.21 3/8" -286 25.34 49.42 1 -058 12.10 23.61 3/4 -172 17.65 33.86 1/2 -288 23.36 45.16 1-1/4 -060 14.19 27.50 1 -174 20.82 39.64 3/4 -290 28.26 53.87 1-1/2 -062 16.27 31.70 1-1/4 -176 21.04 45.10 1 -292 33.02 62.46 1/16" 2 -064 20.50 39.66 3/16" 1-1/2 -178 26.97 50.85 1-1/4 -294 37.46 70.33 2-1/2 -066 24.67 47.74 2 -180 33.31 62.47 1-1/2 -296 42.34 78.98 3 -068 28.89 55.71 2-1/2 -182 39.60 73.89 3/8" 2 -298 52.01 96.18 3-1/2 -070 33.10 63.89 3 -184 46.00 85.50 2-1/2 -300 61.56 113.27 4 -072 37.25 71.79 3-1/2 -186 52.39 97.15 3 -302 71.22 130.45 5 -076 45.64 87.90 4 -188 58.73 108.59 3-1/2 -304 80.84 147.72 6 -078 72.08 104.05 1/4" -226 19.68 38.86 4 -306 90.43 164.87 1/8" -110 22.99 46.08 1/2 -228 17.08 33.16 5 -310 109.68 199.14 1/2 -112 10.73 21.05 3/4 -230 20.67 39.53 6 -312 128.90 233.56 3/4 -114 13.38 25.81 1 -232 24.35 46.07 1/2" -344 29.32 56.55 1 -116 15.88 30.58 1-1/4 -234 27.64 51.97 3/4 -346 35.30 67.10 1-1/4 -118 18.19 35.01 1-1/2 -236 31.43 58.56 1 -348 41.19 77.63 1-1/2 -120 20.82 39.72 2 -238 38.47 71.50 1-1/4 -350 47.03 87.83 1/8" 2 -122 25.95 49.22 1/4" 2-1/2 -240 45.65 84.35 1-1/2 -352 52.96 98.34 2-1/2 -124 30.98 58.59 3 -242 52.85 97.24 1/2" 2 -354 64.87 119.42 3 -126 36.08 68.05 3-1/2 -244 60.01 110.22 2-1/2 -356 76.30 140.55 4 -130 46.23 86.97 4 -246 67.19 123.12 3 -358 89.00 161.72 5 -134 56.40 105.80 5 -250 81.56 148.94 3-1/2 -360 100.60 182.72 6 -136 66.57 124.70 6 -252 95.93 181.86 4 -362 112.52 203.92

22 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com TOOLROOM ACCESSORIES One-Handed Machinist Part No. 52-104-025 EZS Clamps Jack Set Reg. Net Price $19.50 $ 58 Throat Depth 3-1/2" 16 FEATURES: FEATURES: • Set consists of 2 machinist jacks • Single-handed clamping and supplied in a shop hardened case. spreading of workpieces with • Individual jacks consist of a heavy, up to 445 lbs. clamping force. steel cast base with adjustable steel • EZS extend throat depth right screw and tilting swivel head, with to the outside edge of the pads - a lock nut for permanent positioning. power spread across the entire pad. • 1-1/2" jack base for added stability. • The upper section can • Range: Min: 3", Max: 4" quickly convert from clamping • Lifting capacity: 1,000 lbs. to spreading without tools. • Ergonomic handle positioned behind the rail, enabling a powerful grip. • Soft pressure caps optimize material protection and secure clamping.

Approx. T-Slot Toe Clamping Weight Part No. Reg. Capacity Spreading (lbs.) 1-820B- Net Price NOW! Clamp 6" 6-1/2" - 14" 1.20 -EZS15 $20.90 $17.77 1.12 12 6-1/2 - 20 1.80 -EZS30 22.95 19.51 1.00 18 6-1/2 - 25-3/4 2.00 -EZS45 26.05 22.14 24 6-1/2 - 31-3/4 2.30 -EZS60 29.20 24.82 .62 36 6-1/2 - 43-1/2 2.50 -EZS90 34.40 29.24 .38

1.94 FEATURES: ® Great for Machinists, • Low profile cam action Machinist Calc Pro 2 Tool & Die Makers, clamp with positive downforce. Advanced Machining Setters, Supervisors, • Clamp is mounted in the T-Slots Math + Materials and Shop Owners. of machine tables by sliding the T-Slot Part No. Reg. clamp to the workpiece and Size 1-904- Net Price NOW! tightening the locking screw. 9/16 -24128 $40.20 $34.17 FEATURES: • Two Clamping Edges: 5/8 -24148 40.20 34.17 • For face, end or slot milling - Smooth for Machined Surfaces 11/16 -24168 40.20 34.17 plus turning, drilling, and boring. - Serrated for Rough Cut Material 3/4 -24188 42.55 36.17 • Includes materials and tool settings combined with DOC & WOC to solve all your speed and feed calculations. • It gives you step-saving drill and thread T-Slot A B chart look-ups, right triangle solutions, bolt-circle patterns, a larger 2-line Nuts LCD display, and much more. C • Portable, rugged, and cost-effective Last thread is incomplete to prevent D handheld calculator. stud from turning through bottom of nut into machine table. T-Slot Nuts INCLUDES: are undersized to fit machine table slot. F E • Armadillo gear protective hard case. • Long-life battery (CR2025). Table • Quick Reference Guide and Ref. No Thread Slot Part No. Easy-to-Follow User’s Guide. TN A B C D E F 1-903- ONLY! CASE 437 3/8-16 7/16" 1/2" 7/32" 11/16" 7/8" -41404 $2.12 HARDENED Model 4088 500 3/8-16 1/2 1/2 9/32 7/8 7/8 -41405 2.12 Part No. 1-961-004 562 3/8-16 9/16 5/8 11/32 7/8 1-1/8 -41406 2.35 BLACK $ 96 563 1/2-13 9/16 5/8 11/32 7/8 1-1/8 -41409 2.56 OXIDE Reg. Net Price $99.95 84 625 1/2-13 5/8 5/8 11/32 1 1-1/8 -41410 2.61 FINISH 626 1/2-13 5/8 3/4 3/8 1-1/8 1-1/8 -41411 3.54 687 1/2-13 11/16 3/4 7/16 1-1/8 1-1/4 -41412 2.98 Machinery’s Handbook 30th Edition T-Slot TABLE OF CONTENTS: • Tooling & Toolmaking Bolts • Mathematics • Machining Operations FEATURES: • Mechanics & • Manufacturing Processes C • Medium Strength of Materials • Fasteners A F carbon steel. • Properties, Treatment, • Threads & Threading • Threads Class & Testing of Materials • Gears, Splines, & Cams E 2A UNC. • Dimensioning, • Machine Elements G • Black finish. Gaging, & Measuring • Measuring Units L D

Toolbox Edition (4.6" x 7") Thread Length Table Part No. Reg. Part No. 1-961-05530 Size A L Slot C D E F G 1-903- Net Price SALE! $ 46 1-1/2" 1/2" -45203 $4.74 $4.03 Reg. Net Price $109.95 82 2 3/4 -45205 4.83 4.11 2-1/2 1 -45207 5.11 4.34 Large Print (7" x 10") 3 1-1/8 -45209 5.29 4.50 3/8"-16 3-1/2 3/8" 3/8" 3/16" 11/16" 13/16" 1-1/4 -45210 5.55 4.72 Part No. 1-961-06530 $ 46 4 1-1/4 -45211 5.72 4.86 Reg. Net Price $129.95 4-1/2 1-1/4 -45212 5.93 5.04 97 5 1-1/4 -45213 6.20 5.27 5-1/2 1-1/4 -45214 6.48 5.51 For more than 100 years. Machinery's 6 1-1/4 -45215 6.51 5.53 Handbook has been the most popular reference 1-1/2 1/2 -45402 5.65 4.80 work in metalworking, design, engineering and 2 3/4 -45404 5.83 4.96 manufacturing facilities, and technical schools and colleges 2-1/2 1 -45406 6.20 5.27 through-out the world. The 30th edition of the "Bible of the Metal 3 1-1/8 -45408 6.48 5.51 1/2"-13 3-1/2 1/2" 9/16" 1/4" 7/8" 1-3/16" 1-3/8 -45409 6.86 5.83 Working Industries" contains major revisions of existing content, 4 1-1/2 -45410 7.12 6.05 as well as new material on a variety of topics. It is the essential 4-1/2 1-1/2 -45411 7.37 6.26 reference for mechanical, manufacturing, and industrial engineers, 5 1-1/2 -45412 7.42 6.31 designers, draftsmen, toolmakers, machinists, engineering and 5-1/2 1-1/2 -45413 7.54 6.41 technology students, and the serious home hobbyist. 2,896 pp. 6 1-1/2 -45414 7.86 6.68

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 23 MACHINERY Large Bore Engine Lathes

FEATURES: • 10 HP main spindle motor, 12 speeds. • Safety foot brake. • Clutch style headstock. • Inch dials and leadscrews. • Jog button, 4-way rapid traverse. • D1-8 camlock, 4.12" spindle bore. • Centralized lube system in headstock. • Hardened & ground gears & bedways.

SPECIFICATIONS: Swing Over Bed ...... 22" / 26" Swing Over Cross Slide ...... 12.5" / 16.5" Swing Over Gap ...... 30" / 34" Distance Between Centers .....60" / 80" / 120" Spindle Speeds (range) ...... 12 speeds (36-1600 RPM) Spindle Nose/ Spindle Bore ...... D1-8/4.12" Threads Standard ...... 32 (2 to 28) TPI Threads Metric Pitch ...... 22 (1 to 14) MM Tailstock Quill Travel/Taper ...... 6" / #5 MT STANDARD EQUIPMENT: Main Motor ...... 10 HP, 230/460V, 3 PH • 3-Jaw Chuck (12") • Splash Guard • Steady Rest (8") • Thread Chasing Dial Net Weight ...... 7,480 / 8,480 / 9,650 lbs. • 4-Jaw Chuck (16") • Work Light • Follow Rest (1-3") • Coolant System Shipping Weight .. 7,900 / 8,900 / 10,200 lbs. • Face Plate (20") • Standard Tools • 4-way Tool Post • Full-Length

30" x 160" Heavy-Duty Lathe 15 HP, 230/460V, 3 PH With 4-1/2" Spindle Bore

FEATURES: • Center sleeve. • Precision • Threading dial. rigid spindle COMPLETE WITH: • Solid full-length cast iron base. with 3-point • Follow rest. • Extra wide range of inch/metric support. • 15" 3-jaw chuck. threading capabilities and • Hardened • 2-way rapid traverse on Apron. adjustable feed carriage stop. and ground • Coolant system with full • Hardened and ground cross gears and length rear splash guard. slideways and bedways. splines. • 4-position carriage stop. SPECIFICATIONS: • 4-way indexable toolpost. Swing Over Bed / Cross Slide ...... 30" / 21.3" Bed Width ...... 15.75" Width of Gap w/Faceplate ...... 11.8" Model Distance Between Centers ...... 160" Spindle Speeds (12) ...... 10-1,000 RPM HW-30160 Thread Cutting Range Part No. 6-273-079 Inch (44) ...... 2-56 TPI $ 00 Metric (39) ...... 0.5-14 mm 46,950 Spindle Bore / Nose...... 4-1/2" / D1-11 DON'T SEE THE SIZE LATHE YOU NEED? Tailstock Taper ...... 5 MT FINANCE AS LOW AS Net Weight ...... 11,330 lbs. $1,060.13/mo. Shop KBCTools.com or email us at [email protected] with your specific needs. Shipping Weight ...... 11,775 lbs. CALL FOR DETAILS

16" x 40" 13" x 40" Precision Heavy-Duty Toolroom Precision Lathe Lathe with Newall NMS-300 Model TRL-1340 Digital Readout Part No. 6-273-058 $ 00 HEAVIEST FEATURES: 11,495 HEAVY-DUTY • 6 HP spindle FINANCE AS LOW AS motor, 3 PH. 13" LATHE • 16" swing x 40" $264.39/mo. between centers. CALL FOR DETAILS AVAILABLE! • 16 spindle speed, 45-1800 RPM. • D1-6 camlock Complete with spindle with 3-point bearing support. • Large 2" spindle bore. NMS-300 Model Digital Readout GRIP-1640GH INSTALLED! Part No. Part No. 6-269-009-N3 6-273-058-N3 FEATURES: $ 00 $ 00 • 16 spindle speeds, 11,495 13,950 50-2,570 RPM. FINANCE AS LOW AS FINANCE AS LOW AS • 5 HP 2-speed drive motor, /mo. $320.85/mo. 230V, 3 PH. $264.39 • ISO 9001 Certified Factory. CALL FOR DETAILS CALL FOR DETAILS

24 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MACHINERY Complete with 12" x 36" Precision Toolroom Lathe Big 4" Spindle Bore, NMS-300 or DP-700 Clutch Spindle Drive & Digital Readout 4-Way Rapid Traverse. INSTALLED! Part No. 6-273-067 Part No. 6-273-067-N3 $ 00 $ 00 FEATURES: Model 21,200 24,075 • All geared head, KLS-2260C FINANCE AS LOW AS FINANCE AS LOW AS hardened and ground ways. (22" x 60") $478.70/mo. $543.61/mo. CALL FOR DETAILS CALL FOR DETAILS Model Part No. 6-273-068 Part No. 6-273-068-N3 GRIP-1236E Model $ 00 $ 00 Part No. KLS-2280C 22,460 24,975 6-660-010 (22" x 80") FINANCE AS LOW AS FINANCE AS LOW AS $ 00 $507.15/mo. $563.94/mo. 4,365 CALL FOR DETAILS CALL FOR DETAILS FINANCE AS LOW AS Part No. 6-273-069 Part No. 6-273-069-N $100.40/mo. Model $ 00 $ 00 CALL FOR DETAILS KLS-26120C 26,430 31,020 Complete with Floor Stand, (26" x 120") FINANCE AS LOW AS FINANCE AS LOW AS SPECIFICATIONS: Spindle Speeds (9) ...... 70-1,400 RPM Rear Splash Guard, 3- & 4-Jaw Supplied with $596.79/mo. $700.43/mo. Swing ...... 12" Chucks, Slotted Face Plate, Newall DP-700 DRO CALL FOR DETAILS CALL FOR DETAILS Distance Between Centers ...... 36" Steady & Follow Rest. Spindle Mount...... D1-4 Bore ...... 1-1/2" High Precision Engine Lathes FEATURES: • 7.3 HP main spindle motor, 12 speeds. Complete with Complete with 8" 3-jaw chuck, 10" 4-jaw • D1-8 camlock, 3.2" spindle bore. chuck, steady rest and follow rest, 4-way • Solid one-piece cast iron base. toolpost, coolant system with full length • Hardened and ground gears and bedways. rear splash guard, halogen work light, • Centralized lube system in headstock. NMS-300 toolbox with tools, manual and parts list. • Inch dials & leadscrews. Digital Readout • Full-length safety foot brake. INSTALLED! Model KLS-1840G (18" x 40") Part No. Part No. 6-273-070 6-273-070-N3 $15,15000 $17,35500 FINANCE AS LOW AS FINANCE AS LOW AS $342.09/mo. $391.88mo. CALL FOR DETAILS CALL FOR DETAILS Model KLS-1860G Huge 4-1/2" (18" x 60") Spindle Bore & Part No. Part No. 2-Way Rapid Traverse. 6-273-071 6-273-071-N3 $16,04500 $18,36500 FINANCE AS LOW AS FINANCE AS LOW AS $362.30/mo. $414.68mo. CALL FOR DETAILS CALL FOR DETAILS

13" x 40" Precision Toolroom Lathe FEATURES: • 2 HP spindle motor, 1 PH. • 13" swing x 40" between centers. • 8 spindle speeds, 70-2000 RPM. • D1-4 spindle mount, 1-1/2" bore. • Floor model with full-length rear guard. • All gear head, hardened and ground ways.

Complete with

NMS-300 Digital Readout Model GRIP-1340G INSTALLED! COMPLETE WITH: Part No. 6-269-008 Part No. 6-269-008-N3 • 7" 3-Jaw Chuck • Coolant System $ 00 $ 00 • Chuck Guard with Full Length 5,515 7,240 • Steady and Rear Splash Guard FINANCE AS LOW AS Follow Rest • 4-Way Indexable FINANCE AS LOW AS • Halogen Work Light Toolpost $126.85/mo. $166.52/mo. CALL FOR DETAILS CALL FOR DETAILS

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 25 MACHINERY 9" x 16" Horizontal/Vertical Bandsaw Horizontal 3/4 HP, 115V, 1 PH Motor Bandsaw FEATURES: • Built in coolant system. • Hydraulic feed control. FEATURES: • 4 blade speeds. • 1-1/2 HP, 115/230V, 1 PH. • Portable - take this • 9" round, 3" x 16" or machine to the job 9" x 13" rectangular and plug it in. capacity @ 90°. • 4 blade speeds with 1" x 129" blade. • Hydraulic feed control. • Built in coolant system.

Model BAH-916 Model BAH-712 Part No. 6-271-025 Part No. 6-280-005 $2,69500 $1,09900

SPECIFICATIONS: Spare H.S. $70.00 Capacity ...... 7" • / 7" x 11" ❚ Blade Included Value! Blade Size ...... 3/4" x 93" FREE Net Weight ...... 325 lbs. Shipping Weight ...... 400 lbs. Automatic Cycle Bandsaws

FEATURES: Model BS-12A Model BS-15A • Cast iron (12" Round Cap.) (15" Round Cap.) construction. Part No. 6-275-007 Part No. 6-275-009 Horizontal/ • Full auto cycle. • 3 HP drive motor. $ 00 $ 00 Vertical • 1" bi-metal blade. 10,995 13,295 • Net Weight: Bandsaw 1,800 or 2,200 lbs. FINANCE AS LOW AS FINANCE AS LOW AS 3/4 HP, 115V, 1 PH • Shipping Weight: $252.89/mo. $305.79/mo. 2,000 or 2,500 lbs. CALL FOR DETAILS CALL FOR DETAILS Model HVBS-712 Part No. 6-200-033 $1,49900 FEATURES: • 7" round, 7" x 12" rectangular capacity. • Portable, take the job & plug it in. • Hydraulic feed control. • Built-in coolant system. • 4 blade speeds. • 3/4" x 93" blade. MODEL • Net Weight: 374 lbs. BS-15A SHOWN

Vertical Tilt Frame Bandsaw

FEATURES: Model TF-1420 • Large 14" x 20" cutting Part No. 6-398-006 capacity at 90°, 14" x 13" at 45°. 14-1/2" Capacity • Infinitely variable blade speeds $ 00 from 50-400 ft./min. via A.C. inverter 13,795 Gravity Feed speed control - full motor torque FINANCE AS LOW AS Vertical Saw through entire speed range! $317.29/mo. • Infinitely variable feed from 0-150 lbs. CALL FOR DETAILS (via. air/hydraulic system). FEATURES: • Tilt frame design enables • 1 HP Motor, 1 Phase. angle cuts without • Accepts blades having to move from 1/4"-3/4" wide. the stock. • 4 blade speeds to select from. • Accurate gravity feed with hydraulic speed control and depth stop. • Rugged simple construction for easy maintenance and long service life.

Model EF Part No. 6-398-005 FINANCE AS LOW AS $ 00 $119.49/mo. 5,195 CALL FOR DETAILS

26 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MACHINERY

F.O.B. FACTORY Universal — TENNESSEE Box & Pan Brake 16 Gauge WITH STAND Foot Squaring Metal Shear

Model HBU48-16 Model 52 Part No. 6-700-040 Part No. $1,73000 6-700-010 $2,99500 SPECIFICATIONS: Capacity, Mild Steel ...... 16 GA. SPECIFICATIONS: Bending Length ...... 48-1/4" Max. Shearing Capacity, Mild Steel ...... 16 GA. Maximum Depth Of Body ...... 4" Max. Shearing Capacity, Stainless Steel ...... 20 GA. Maximum Lift Of Beam ...... 1-1/4" Maximum Cutting Length ...... 52-1/4" Front To Rear Back Gauge Range ...... 30" Beam Adjustment ...... 5/8" Front Gauge Range ...... 37" Minimum Reverse Bend ...... 1/4" Floor Space, Gauges in Position ...... 60" x 80" F.O.B. FACTORY Min. Flange In Cap. Material ..... 1" Overall Dimensions, Less Gauges, — TENNESSEE Finger Widths ...... 2, 3 & 4" L x W x H ...... 61" x 36" x 42" Shipping Weight...... 580 lbs. Shipping Weight ...... 1,100 lbs.

12" Disc & 13-1/4" Oscillating 6" x 48" Belt Bench Model Heavy-Duty Drill Press 3/4 HP, 115V, 1 PH Combination Sander TWO TOOLS IN ONE! 1-1/2 HP, 115V, 1 PH Motor Serves both as a regular drill press & oscillating spindle sander. Perfect for a shop with limited space. Patented machines come with an oversized hole and reducer rings to match different Model WS1712 sanding drum sizes with the dust port. Part No. 6-397-WS1712 Model W1668 Part No. 6-397-WS1668 Complete with Tilting $ 74 Table, Dust Port, Drill 771 $39857 Chuck & Sanding Drums. FEATURES: • Precision ground cast iron tables. SPECIFICATIONS: • On/off toggle switch with safety key. Overall Height...... 38" • Shielded ball bearing construction. Spindle Travel...... 3-1/4" • Cabinet style stand with Swing...... 13-1/4" power coated paint. Drill Chuck...... 5/8" • Quick change belt release. Dust Port Size...... 2-1/4" • Heavy-duty mitre gauge. Speed Range (12)...... 250-3,050 RPM Table ...... 12-3/8" dia. / 360 2 YEAR • 2" and 2-1/2" dust port. WARRANTY • Net Weight: 178 lbs. Net Weight...... 120 lbs. • Shipping Weight: 230 lbs. Shipping Weight...... 127 lbs.

20-1/2" Floor Radial Drill Press Drill Press 3 HP, 230/460V, 3 PH 1-1/2 HP, 115/230V, 1 PH With 39" Arm FEATURES: • Hinged metal belt and pulley cover. Complete with Box Table, • Quick adjustment motor mount. Coolant & Work Light. • Rotating ± 45o tilting, crank-operated worktable with quick-release clamp. • 1/2" diameter external positive depth stop with 3-nut locking feature. Model RD-1000 • Adjustable tension spindle return spring. Part No. 6-269-011 • Spindle supported by high quality ball bearings. $ 00 11,495 Model JDP-20MF FINANCE AS LOW AS Part No. 6-200-039 $264.39/mo. $ 00 CALL FOR DETAILS 1,189 SPECIFICATIONS: Distance, Spindle SPECIFICATIONS: to Column...... 39.4" Swing ...... 20-1/2" Spindle Taper ...... 4 MT Max. Dist. Spindle to Table...... 29-1/8" Quill Travel ...... 9-7/8" Max. Dist. Spindle to Base ...... 46-3/4" Column Diameter ...... 10" Drilling Capacity (steel)...... 1" Complete with Built-In Work Spindle Taper...... 3MT Drilling Capacity ...... 1-1/2" Light, T-Slot Table with Coolant Voltage/Phase...... 230/460V, 3 PH Spindle Travel ...... 4-5/8" Column Diameter...... 3-3/8" Through, 1/2" Capacity Drill Chuck Overall Height ...... 93" & Arbor, Manual Parts & List. Net Weight ...... 3,080 lbs. Table Size ...... 18-5/8" x 16-1/8" Shipping Weight ...... 3,800 lbs. Net Weight ...... 288 lbs. Shipping Weight ...... 375 lbs.

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 27 MACHINERY

with Purchase 9" x 49" Turret Milling Machines FREE of any KBC Mill / 3 HP, 230/460V, 3 PH Step Pulley Motor DRO Package SPECIFICATIONS: TOOLING Table Size ...... 9" x 49" Longitudinal Travel Manual Model ...... 35" Longitudinal Travel w/Power Feed ...... 31" Cross Travel / Knee Travel ...... 12" / 16" Table To Spindle min-max...... 0-18-3/4" Spindle To Column at 90° ...... 6-3/4" - 18-3/4" Spindle Speeds (Var.) ...... 70 - 4,200 RPM Spindle Taper ...... R-8 Power Quill Feeds (per rev.) ... .0017"/.0032"/.0053" Quill Travel ...... 5" Net Weight (approx.) ...... 2,200 lbs. $211.49 Shipping Weight ...... 2,700 lbs. Value! 3HP Variable • 13 Pc. Collet Set (1-519-020) Speed Head! • 52 Pc. Clamp Kit (1-904-20402) • 10 Pc. End Mill Set (5-300T-050) Model TUM-1VS Complete with Part No. Part No. 6-265-007-N3 6-265-007 10" x 54" CNC Vertical NMS-300 2-Axis $ 00 $ 00 Milling Machine Digital Readout 9,195 7,700 & Table Feed FINANCE AS LOW AS FINANCE AS LOW AS With 3-Axis Acu-Rite $211.49/mo. $177.10/mo. G2 CNC Control INSTALLED! CALL FOR DETAILS CALL FOR DETAILS

Model TUM-3VS-G23 Part No. 7" x 18" Vertical Bench Mill 6-265-006-G23 2 HP, 230V, 1 PH Motor $ 00 27,720 Model GRIP-16 COMPLETE WITH: FINANCE AS LOW AS Part No. 6-275-003 • Toolbox & Tools $625.92/mo. • Manual & Parts List CALL FOR DETAILS $ 00 • Drawbar for R8 Collets 2,245 • Front & Rear Rubber Way Covers • 1/2" Capacity Drill Chuck & Arbor

FEATURES: • Reversing switch. • Manual quill feed both rapid spoke wheel and fine feed handwheel control with an easy to FEATURES: read, front mounted depth gage. • 3 HP, 3 PH Motor • Dovetail ways on table & • NEW Acu-Rite G2 CNC saddle with adjustable tapered gibs. control - easy to learn • Head assembly is raised and and simple to use. You won't find a lowered on the column by a crank. SPECIFICATIONS: • 10" x 54" hardened and The head pivots 360o on the column ground table with precision better value on a Drilling / End Mill Capacity...... 1-1/4" / 3/4" and can be locked in any position. Swing...... 15-7/8" hardened ground ways. CNC knee mill • Control features canned Max. Distance, Spindle to Table...... 18" cycles for all regular milling with top quality Complete with Spindle Taper / Travel ...... R8 / 5" and drilling jobs, just fill-in the Acu-Rite G2 Control! Column Diameter...... 4-1/2" blanks to complete a program. FREE Spindle Speeds (12)...... 110-2,385 RPM • Reliable mechanical V.S. Floor Stand! Table / Cross Slide Travel...... 18" / 7" Mill head delivers full torque Effective Table Area...... 28" x 8" over entire speed range. Overall Height...... 43-1/2" • Heavy-duty box ways on knee and column Net Weight...... 660 lbs. with extra wide saddle for added rigidity. Shipping Weight...... 750 lbs.

10" x 54" Heavy-Duty Milling Machines Complete with 3 HP, 230/460V, 3 PH Motor NMS-300 2-Axis SPECIFICATIONS: Table Size ...... 10" x 54" Digital Readout Longitudinal Travel Manual ...... 32" & Table Feed with Power Feed ...... 28" Cross Travel ...... 16" Model INSTALLED! Knee Travel ...... 16" TUM-3VS Part No. Table to spindle min/max ...... 16-5/8" Part No. 6-265-006 6-265-006-N3 Spindle to column at 90O ...... 5" - 22" Shown with Spindle Speeds ...... 70 - 4200 RPM Newall Digital $ 00 $ 00 Spindle Taper ...... R8 Readout and 8,620 10,115 Power Quill Feeds (per rev.) . .0017/.0032/.0053 KBC Table Feed. Quill Travel ...... 5" FINANCE AS LOW AS FINANCE AS LOW AS Net Weight...... 2,800 lbs. $198.26/mo. $232.65/mo. Shipping Weight ...... 3,200 lbs. CALL FOR DETAILS CALL FOR DETAILS

28 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MACHINERY 6" x 18" Manual Surface 20" Disc Grinding Machine Sander/Grinder 2 HP, 230V, 3 PH Motor COMPLETE WITH: FEATURES: • Heavy-duty cast FEATURES: • Leveling Pads iron construction. • Wheel balancing base • Manual & Parts List • Hand wheel and arbor for precision • Flood Coolant System for raising and balancing of grinding wheel. • Grinding Wheel and lowering table. • Roller ways for smooth Wheel Mount • Powerful 2 HP effortless table travel. • 6" x 18" Permanent direct drive • Double "V" saddle way design • Magnetic Chuck motor with 3 PH. for precision cross travel. • Table Mount Diamond • For use on all • One-shot lube system Wheel Dresser materials; wood, provides oil to all sliding surfaces. metal, plastics, etc. • Cartridge-type grinding spindle • 20" solid metal disc is with precision spindle bearings. high speed balanced for smooth vibration free operation. Model SGS-618 Part No. 6-271-015 Model DS-20 $ 00 SPECIFICATIONS: Part No. 6-150-010 6,895 Table Working Surface...... 6" x 18" FINANCE AS LOW AS Spindle Speeds...... 3,600 RPM $ 00 $158.59/mo. Wheel Size...... 8" x 1/2" x 1-1/4" 1,490 CALL FOR DETAILS Shipping Weight...... 1,850 lbs.

6" x 18" Manual 3-Axis Auto Feed Surface Surface Grinders Grinder 2 HP, 230V, 3 PH FEATURES: • 5 or 7.5 HP, 3 PH motor. • Automatic lubrication. • 14" x 1-1/4" x 5" or Complete with 14" x 2" x 5" wheel. full coolant • Net Weight: 4,400 lbs. system, 6" x 18" or 6,260 lbs. permanent • Shipping Weight: magnetic chuck, 5,000 lbs. or 6,800 lbs. grinding wheel & wheel mount. Model SGS-1230AHD (12" x 30" Cap.) Part No. 6-273-020 $ 00 Model 25,800 KGS-618M FINANCE AS LOW AS Part No. 6-273-003 $582.56/mo. $8,84500 CALL FOR DETAILS Model SGS-1640AHD FINANCE AS LOW AS (16" x 40" Cap.) /mo. $203.44 Part No. 6-273-025 FINANCE AS LOW AS Complete with Electric Chuck, CALL FOR DETAILS $ 00 $874.98/mo. Coolant, & Overhead Dressser. CALL FOR DETAILS FEATURES: 38,750 • Ultra high column with 21" spindle to table. • Cartridge spindle with ABEC-7 10" x 20" 3-Axis Auto precision spindle bearings. • Roller ways for smooth effortless table travel. Feed Surface Grinder • Double "V" saddle ways, H-frame column design & heavyweight. • Oversize spindle housing & flange mount design allows FEATURES: heavier grinds than with other similar size machines. • 10" x 20" grinding capacity. • Construction gives this machine exceptional rigidity. • Precision hand scrapped turcite table and saddle ways. • Rapid elevation motor for quick and easy positioning. • High column design with 19" spindle center to table. FREE • Automatic lubrication system. • 3-axis automatic movement with 5 Gallon Pail incremental downfeed in .0001" steps. of GRINDZALTM Pure Synthetic Model Grinding Coolant SGS-1020AHD Part No. 6-273-015 $99.40 $ 00 Value! 19,950 FINANCE AS LOW AS with Purchase of COMPLETE WITH: $450.47/mo. any Surface Grinder Part No. 1-123-065 • 8" x 20" Magentic Chuck CALL FOR DETAILS • Dust-suction Coolant • Overhead Dresser

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 29 SHOP SUPPLIES ® Button Thread 0

Quill Stop 1

2 THERE IN JUST

Quick Set

FEATURES: TO 3 Shield Kit • Easily installed. 2 SECONDS! • Turning the nut gives precision 4 micrometer adjustments of .001". FROM HERE KIT INCLUDES: 5 • 14" Adjustable, • Touching button lets nut slide up and down. 3/4" Loc-Line® Arm. • Releasing the push button locks the nut in place. • Magnetic Base. SHIELD YOURSELF FROM • All steel construction with engraved graduations. • Fitting for Fixed Mounting. CHIPS AND COOLANT. Part No. 1-541-QN30 $ 03 For all Bridgeport-type mills 8-1/2" x 12" or any 1/2"-20 stop rod. Quick-Set Shield Kit Reg. Net Price $36.50 31 Part No. 1-836-60527 Reg. Net Price $37.45 "THE BIB" Way Cover Set $ 71 33 For Vertical Milling Machines FEATURES: • Protect ways from chips and oil. • Easily mounted with two screws. • Made of heavy .070 oil and chip-resistant Mig Wire Neoprene rubber. Utility Pliers • Cut clean-up time. Specifically designed Part No. 1-541-400 $ 96 for use with mig welders. Reg. Net Price $59.95 50 Dimensions: 0.7" x 3.3" x 11.4" Part No. 1-701-11448 General Purpose 3" Dia. x 4’ Long $ 99 BUY A BOX Reg. Net Price $16.46 13 Maintenance Socks SAVE MORE! FEATURES: • Absorbs most non-aggressive fluids, oil or water based. ® • Highly absorbent sock for industrial maintenance. Nextera • The sock "skin" allows fluids to pass Over-the-Head Earmuff through quickly to the absorbent fill inside. Individual Socks Box of 40 The most comfortable, highest Part No. Part No. Reg. powered muff type ear protector Model 1-835- ONLY! 1-835- Net Price NOW! in the industry. Heavy weight, high band pressure and AMI-34-GP -706 $2.60 -707 $97.30 $87.57 high cost are no longer necessary to get the best. Part No. 1-700T-3006 Anti-Fatigue Reg. Net Price $24.65 Matting $ 95 DIAMOND FOOT™ Black 20 Durable vinyl surface bonded to a resilient, Ergo FlexTM closed-cell foam, provids anti-fatigue & wear characteristics. FEATURES: • Two point suspension for FEATURES: even pressure distribution. • Beveled edges for safety. • Diamond plate surface 24" x 36" (9 lbs.) • Sewn, foam filled head • 9/16" thick made from 100% Part No. 1-913-442S2436 $ 79 pad for optimal comfort. ultra-comfort foam. recycled materials. ™ Reg. Net Price $35.05 • Soft-Seal ear cushions provide • Industry favorite • Surface resists common 29 maximum acceptance & comfort. diamond plate surface fluids, most chemicals, 36" x 60" (22 lbs.) • NRR = 30, highest rated anywhere. for enhanced traction. and is non-flammable. • Tested at NVLAP accredited laboratory. Part No. 1-913-442S3660 $ 46 • Meets CSA Class AL. Limited 3 year warranty against wear & delamination. Reg. Net Price $87.60 74

NEBO SLYDETM King Rechargeable Portable Flashlight and Work Light The SLYDE KING is equipped Magnetic Base with programmable memory settings for each light mode, a new COB LIGHTING MODES red light function, a 4x adjustable zoom Run Time Viewing FEATURES: Mode Lumens (Hours) Distance • 20o beam spread. and best of all ... it's rechargeable! • 9' grounded cord and plug. Flashlight 330 2 123 M • Dust-free vinyl coated industrial FEATURES: Work Light 250 4.25 22 • Convex lens. Red Light 40 4.75 7 strength flexible gooseneck. Red Flash 40 24 7 • Metal shade with a 22" • Tactical edge. reach magnetic base. • Dimmable beam. • 6 watt, 120V LED lamp • Powerful magnetic base. • Side-positioned ON/OFF button. Part No. 1-541-6434 $ 99 produces 370 lumens. Reg. Net Price $39.99 • Push button on/off • Anodized aircraft-grade aluminum: 35 switch with rubber boot. water and impact-resistant. • Work light automatically SPECIFICATIONS: Model 7842 turns ON when opened. Length Compacted / Extended.... 6-7/8" / 9" • Includes 1 Li-ion rechargeable Diameter Barrel ...... 1-1/4" Part No. 1-541-7842 $ 60 battery (3-4 hr. rechargeable time) Diameter Head ...... 1-3/4" Reg. Net Price $117.18 99 and 1 micro USB to USB cable. Weight ...... 0.8 lbs.

30 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com SHOP SUPPLIES

® Air Guns ® Recoil For High Power Extension Part No. Reg. Air Hose FEATURES: Model No. Length 1-816G- Net Price SALE! • Venturi nozzle delivers 100% more thrust compared to 75LJ 006 AA 6" -LJ006 $28.77 $24.45 conventional air guns. 75LJ 012 AA 12" -LJ012 30.16 25.64 75LJ 018 AA 18" -LJ018 31.56 26.83 • Cleans hard to reach areas. 75LJ 024 AA 24" -LJ024 32.96 28.02 FEATURES: • Spring-type 25' x 1/4" Hose VENTURI NOZZLE SERVES 2 PURPOSES: bend restrictors Part No. 1-397-610 • (1) Main air flow speeds up as it passes • (2) Should the nozzle tip become blocked, relieve the strain through the nozzle drawing in ambient air all of the main air flow exits through the side near hose ends. $ 85 through the two side ports. The increased ports. Under these conditions static pressure • Made of lightweight nylon and 9 velocity and increased volume of air exiting the at the nozzle tip is held to less than 30 PSI, premium brass connectors swivel 360o. nozzle boosts the available thrust up to 250%. thereby satisfying OSHA safety standards. • After each use, the hose naturally springs back into its compact, coiled shape. 30' Flat Hook Tiedown Variable Speed Long Handle Ratchet

Power Table Feed FEATURES: FEATURES: • Meets all DOT, CHP, • Electrical and mechanical and CVSA requirements. parts are made for easy • Flexible, conforms to maintenance. and controls the load. SECURE YOUR LOADS WITH • Design assures • Ratchet assembly THESE QUALITY TIEDOWNS! long trouble-free life. allows fast, easy adjustment. • Special electrical relay protects against damage LiftAll Code: 61002 SPECIFICATIONS: caused by power failure. Part No. 3-003-30001 Strap Width...... 2" $ 37 Breaking Capacity ...... 10,000 lbs. Reg. Net Price $36.90 31 Capacity ...... 3,000 lbs. SMOOTH RUNNING

Part No. 2-011-211 Reg. Net $ 25 Quill Kit Price $385.00 327 With ABSOLUTE Encoder SPECIFICATIONS: Input Voltage ...... 110V, 50/60 Hz., 1PH FEATURES: Speed Range ..... 4-160 MAX 200 RPM • Push button controls for Operating Torque ...... 150 in/lbs. inch/mm, zero-set and on/off. • Easy to read LCD with resolution of .0005" (0.01mm). 0-5" travel inch/mm. • Powered by a single SR-44 battery lasting about 1 year with normal use. • SPC Output for data transmission to data processors or a remote display. Easy installation Pro Lathe fits most vertical Gage Part No. 1-808-053906 $ 50 knee mills. Reg. Net Price $310.00 263 Hand Free Design! FEATURES: • Durable anodized finish. Anti-Scratch Anti-Fog • Ground steel shaft mounted on dual precision ball bearing. Welding Goggles • Made from high strength aluminum. FEATURES: • Set turning, and facing Part No. 1-811-02000 • Designed for gas tools on spindle axis for Reg. Net Price $34.99 welding and plasma cutting. Part No. 1-701-41217 optimum cutting conditions. • Equipped with IR5 lenses • Precision glass vial level $ 49 that are designed to prevent Reg. Net Price $15.80 with 30' (2mm) sensitivity. scratching and fog build up. 31 • Flexible 180o viewing angle. $ 43 • Can be used with glasses. 13 • Vented to eliminate fog. • Frame Material: PVC (Polyvinyl chloride). PERFECT FOR LIGHT TO MEDIUM • Meets ANSI Z87.1 standards. SOLDERING, BRAZING, CUTTING OR WELDING. 1500 Lumen • Lens Dimensions: 8-7/8" x 3-5/16". LED Work Light Law® Over The Glass FEATURES: Clear Safety Glasses • Cool to the touch. • Long lasting, Anti-Fog - Silver Temple Color super bright LED. • Sealed on/off switch. • Adjustable scissor stand. • Tripod mountable. FEATURES: • 5' Cord length. • 5 position ratchet action temple allows lens angle adjustment. Part No. 1-909-36013 • Rugged polycarbonate lens filters 99.9% of harmful UV rays. Reg. Net Price $33.50 • Dielectric design, no metal parts. • Non-slip TPR temples give the user comfort $ 80 and grip and the wrap-around style allow 26 improved angular coverage and peripheral vision. • Exclusive Duramass® scratch resistant coating. Part No. $ 94 • Oversized frame and lens to fit over prescription glasses. 1-711-OG110AF 5

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 31 FLUIDS

Refillable Aluminum Spray Bottle Ideal for Lubricants, Rust Preventatives, & Brake Cleaning Fluids.

INCLUDES: • 7.7 oz Spray Bottle. • Jet Nozzle: 6.1" (155mm). Valve Action® Paint Markers • Conventional Spray Nozzle. FEATURES: YOUR CHOICE • Economic and ecologically-friendly FEATURES: NOW $ 61 alternative to aerosol spray cans. • For improved mark identification, ONLY! • Durable 2-part construction allows quality control, and parts inspection. 2 for easy filling, maintenance & cleaning. Marks in Reg. Net Price $3.07 • Fast-drying, permanent paint for immediate Real Paint! • Brass air valve allows for easy handling reduces work downtime. maximum pressurization of 116 PSI. • Dura-Nib medium bullet tip resists wear. Part No. • Not recommended for paint, air • Durable metal barrel and clip-cap. Color 1-443- dusting, acids, or corrosive chemicals. • Xylene-free paint reduces user health risks and White -96800 eliminates California Proposition 65, EPA HAPS Yellow -96801 Part No. 1-541-19426 $ 24 and SARA 313 concerns in the U.S.A. Reg. Net Price $68.32 51 • Marking Range: -50oF to 150oF. Red -96802

® Tapmatic 262™ Threadlocker Edge Lube High Strength / Red / Permanent

FEATURES: 60M-12 Excellent for preventing • White, solid, waxy bar. PORTaMIST rust and corrosion. • Extends grinding wheel life. FEATURES: • Excellent for belt, wheel or disc Only • Apply to fasteners up to 3/4" grinding, and sawing applications. in diameter before assembly. • Low toxic, biodegradable, low odor. Includes 1 delivery line. • High lubrication for easy assembly. • Eliminates heat • Solvents will not weaken the adhesive bond. build-up and belt loading. Part No. • Localized heat & tools required to separate. • Does not contain 1-437-565 any hazardous chemicals. Reg. Net Part No. Reg. 13 oz. Tube Price $129.00 Size 1-444- Net Price SALE! Part No. 1-444-43200 $ 49 $ 65 10 ml bottle -26221 $17.21 $14.63 Reg. Net Price $18.32 16 109 50 ml bottle -26231 47.88 40.70

Adjustable Coolant Hose System Kits THE ORIGINAL MODULAR HOSE SYSTEM! FEATURES: • Loc-Line® is electrically non-conductive. KITS INCLUDE: 1/4" Hose Kit 1/2" Hose Kit It is ideal for use as an EDM flushing hose. • Male NPT Part No. 1-836-40413 Part No. 1-836-50813 • Loc-Line® will stay in position without any springback. Connectors: 3/8 & 1/2" Reg. Net Price $8.92 Reg. Net Price $10.06 Creep due to machine vibration is eliminated. • Nozzles: 1/16, 1/8 & 1/4" • Loc-Line® is fully hand-adjustable • 13" Length w/ Fittings: $ 03 $ 05 in both position and length. (2) 5-3/4" Segments 8 9

Flood Type SAWZIT™ 2000 ALL PURPOSE SAWING Coolant Unit LUBRICOOLANT FEATURES: • Tanks are made of oil FEATURES: resistant polyethylene. • New semi-synthetic transparent lubricoolant that WATER SOLUBLE! • Screen and chip collector are will handle your toughest metal working applications. easily removed for fast cleaning. • Cools the work to prevent distortion and • Centrifugal pumps are available discoloration from residual heat on all metals. for all machine tool coolant units. • Low foaming which means exceptional clarity. • The flow of coolant liquids can be • Does not contain sulfurs, chlorine, regulated to any desired amount nitrates or heavy duty salts. without harmful effects to the motor • Less down time cleaning machine (flow cannot be completely shutoff). which means more parts output. • Extended tool life through Model VMC-1 increased lubrication. Performance (GPH @ Head) • Will stay transparent Part No. 1-440-001 $ 92 Water Soluble Oil at any dilution ratio. Reg. Net Price $190.49 • Long sump life. 161 1’ 3’ 6’ 9’ SPECIFICATIONS: 108 100 86 60 1 Gallon 5 Gallon Pail Motor ...... 115V Part No. 1-123-205 Part No. 1-123-210 Shut-Off ...... 11.5' APPLICATIONS: Reg. Net Price $19.15 Reg. Net Price $91.65 Power Cord ...... 4' • Cut-Off Saws • Drill Presses Dimensions ...... 9.38" H x 12" L x 6" W • Bench Mills • Tool Grinders $ 24 $ 07 Weight ...... 6 lbs. • Lathes • Tapping Machines 17 87

32 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com HAND TOOLS ® 22 Pc. ColorGuard™ ® Click Torque Wrenches Ball End L-Wrench Set

FEATURES: • Color-coded to be distinguished at a glance. • Superior rust protection finish. • Sizes are stamped on the tool. • Ball End inserts into screw at a 25° angle. • ColorGuardTM is a color-coded protective finish: durable color-coded finish for superior protection and easy tool identification. 1/4" Drive FEATURES: Torque Range: 20-200"/lbs. • Hear and feel wrench click when torque value is reached. Part No. 1-909-2432 $ 79 Combo Inch / Metric • High-contrast dual range scale Reg. Net Price $57.40 48 #69637 (.050" thru 3/8") & is easy to read in low light. #69699 (1.5mm thru 10mm) • Reversible drive chrome 1/2" Drive Part No. 1-927-69600 $ 60 vanadium steel ratchet head. Torque Range: 10-150 ft./lbs. Reg. Net Price $53.25 • Durable all-steel construction 42 with corrosion-resistant finish. Part No. 1-909-2460 $ 54 • Knurled handle provides a Reg. Net Price $58.28 49 sure, non-slip grip. 148 Pc. Master 3/8" Drive Torque Range: 120-960 inch/lbs. Security Bit Set Supplied with conversion table chart Part No. 1-909-2455 $ 88 Assortment of the most and storage case. Reg. Net Price $51.62 43 popular and hard-to-find bits for many different applications. 12 Pc. Screw Extractor Set SET INCLUDES: • 3-1/2" Magnetic Bit Holder. For removing broken screws, • Quick-Release Bit Holder. bolts, studs, and pipes. • 1/4" Driver Socket Adapter. Siizes: #1 to #6. • Contains Phillips, Slotted, Supplied with injection Square, Star, Pozi, SAE molded storage case. Part No. Hex, Metric Hex, Tamper 1-397-6718 Resistant Star, Tamper Reg. Net Resistant Hex, Clutch, Part No. 1-909-16148 Spline Spanner, Tri-wing $ 95 Price $15.95 and Quad-Wing drive bits. Reg. Net Price $55.06 39 $1436 Supplied in a KLEIN TOOLS plastic case. 10 Pc. 6" T-Handle Hex Key Wrench Set Transfer Punch Set 3/32" to 1/2" by 64ths. PLUS Handy 17/32" Size! FEATURES: Part No. • Soft touch grips for maximum 8-408-001 control and comfort. • Blade-through handle design Reg. Net for high torque applications. Price $14.80 • T-Handle design delivers maximum power. $ 58 • Convenient hang hole. 12 • Treated steel for rust and corrosion resistance. Inch Set Includes: • Tip-Ident sizes marked. 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", • Sizes laser etched on blade. 7/32", 1/4", 5/16" & 3/8" 8 Pc. Drive Pin • Chamfered end. Part No. 1-927-70152 $ 64 • Supplied with a metal stand. Reg. Net Price $58.40 49 Punch Set

Pliers Model 1435 FEATURES: • Striking head and front FEATURES: taper centerless ground. • A flip of the tab and the pliers change • Heavy knurled finger grip. between internal and external applications. • Shiny black oxidized finish. • Adjustable stop on the pliers jaw allows • Single piece made you to turn clockwise to reduce jaw opening from hardened and and counter-clockwise to increase jaw opening. tempered tool steel. • Comfort grip made of low-temp, high- • Tip hardened impact material providing extra durability. to 45-52 HRC. Part No. 1-397-SPC80 5 Color Coded Pairs Of Tips SIZES INCLUDED: Reg. Net 1/16", 3/32", 1/8", 5/32", Straight Sizes: .036", .047", .070". Part No. 1-820-335 Supplied with a Price $12.75 o 3/16", 7/32", 1/4", 5/16" Bent 90 Sizes: .036", .047". Reg. Net Price $26.18 hex wrench in a $ 56 master pouch for Supplied in a plastic case. External Ring Sizes 1/4" thru 2" $ 25 convenient storage. 9 Internal Ring Sizes 3/8" thru 2" 22

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 33 POWER / AIR TOOLS Right Angle Die Grinder Bench Grinders FEATURES: • Angled head makes it ideal Provides 88 plus minutes of for working in tight spaces. continuous use at full load with • Features smooth-action safety lever throttle. less than 1% RPM loss from the • Grinder collet holds most 1/4" shank wheels, stated maximum. Capacitor motors bits and other accessories. Hooks up to any supply the extra current required 1/4" air hose coupling. during start-up and running under • Includes internal regulator load. Large diameter armature to control air pressure. Model PT2412 shaft with shielded ball bearing. Part No. 1-832-PT2412 CSA NRTL/C certified. SPECIFICATIONS: Reg. Net Price $49.80 FEATURES: INCLUDES: Speed ...... 20,000 RPM • Heavy-duty construction with powerful, • Tool Rest Air Consumption ...... 3 CFM $ 88 long-life motor for use all day, everyday. • Eyeshields Overall Length ...... 4-7/8" 29 • Large cast aluminum tool rest tilts for angle grinding. • Spark Arrestors • For general purpose grinding including sharpening, shaping, • (1) 36 Grit & (1) 60 deburring, stock removal and cleaning of rust & scale. Grit Grinding Wheel Micro Air Die Grinder • Dust collection hose on #82081 (2-1/2"). • Power Cord

FEATURES: Wheel Max Arbor Part No. Reg. • Rear exhaust. Dia. H.P. Voltage (Phase) RPM Size 1-549- Net Price NOW! • Slim and comfortable design. 6" 1/3 120/240 (1 PH) 3,450 1/2" -82061 $135.00 $114.75 • Ideal for final cleaning 8" 3/4 120/240 (1 PH) 3,450 5/8" -82081 257.00 218.45 and polishing of dies, jewelry and hobby use too. • Built-in variable speed twist air regulator. • Includes nipple and wrenches. 4-1/2" SPECIFICATIONS: Small Angle Free Speed ...... 56,000 RPM Collet Size ...... 1/8" INCLUDES: Grinder Air Pressure ...... 90 lbs. PSI Part No. 1-829-6200 • Blade wrench. Air Consumption ...... 2 CFM Reg. Net Price $42.95 • 2 position side handle. Hose Size ...... 3/8" • Keyless adjustable guard. Air Inlet ...... 1/4" NPT Overall Length ...... 5-1/4" $ 51 Weight ...... 0.44 lbs. 36 SPECIFICATIONS: Spindle Thread ...... 5/8"-11 No Load Speed...... 11,000 RPM Motor...... 11 AMP 2" Belt Length ...... 11-1/4" Part No. 1-826-D28402 $ 68 Sander Weight ...... 4.6 lbs. Reg. Net Price $131.39 111 FEATURES: FEATURES: • Tilt Table. Part No. • Designed for faster material removal • Quick-ChangeTM Wheel Release • 2" x 48" Belt. 2-002-2FSM and higher overload protection. provides easier and quicker wheel • Direct drive 1/2 HP, 115V, • Dust Ejection SystemTM provides removal without the need for a wrench. 1 PH motor. Reg. Net durability by ejecting dust particles • Auto-off shuts the tool down • Hinged guard for quick Price $485.00 that enter the tool through the when the brushes need replacing belt change. air intake vents. to avoid tool damage. • Shipping Weight $ 50 • Keyless adjustable guard provides • Paddle switch lock-off provides the user (approx.): 55 lbs. 436 tool free guard adjustment. protection from accidental start-up.

Sawzall® Recip Saw Kit 1/4"Extended Die Grinder FEATURES: FEATURES: • Full-size, lightweight aluminum construction. • Maximum cut control. • Variable-speed throttle with safety lock. • Powerful motor delivers • Rugged, ball-bearing design for durability. high performance cutting SPECIFICATIONS: in a variety of materials. Voltage ...... 120V AC SPECIFICATIONS: • Counter weighted Motor...... 12 AMP Collet Size ...... 1/4" Model JAT-402 mechanism provides reduced No Load Speed...... 0-3,000 SPM Speed ...... 23,000 RPM Part No. 3-JAT-402 vibration for smoother operation. Stroke/Cord Length ...... 3/4"/10' Average Air Con...... 4 CFM $ 99 • Gear protecting clutch extends Reg. Net Price $99.99 Overall Length ...... 19" Air Inlet ...... 1/4" NPT 84 gear and motor life by absorbing high Tool Weight ...... 7.1 lbs. Air Pressure ...... 90 PSI impact forces caused by blade lock-ups. Horsepower...... 1/2 HP • QUIK-LOK blade clamp provides Overall Length...... 13-3/16" fast, tool-free blade changes. Part No. 1-828-6509-31 $ 80 Tool Weight...... 1.41 lbs. • Supplied with a carrying case. Reg. Net Price $168.00 142

Electromagnetic ELECTROMAGNETIC DRILL STAND ONLY Max. Drill Point Drill Presses Voltage/ Pressure On Drill Dimensions Weight Part No. Reg. AMP 1" Steel Plates Travel (H x W x L) (lbs.) 1-828- Net Price SALE! FEATURES: 120/12.5 1,650 lbs. 9" 15" x 4-1/4" x 11" 41 -4202 $1010.80 $909.72 • For use on any flat ferrous material 1/2" & thicker. • Line lock-out prevents tool from operating should voltage be restored to an interrupted DRILL line when switch is locked in the "on" position. MOTORS • Forward/reverse & feedback speed control. • Full wave magnetic holding power. • Superior cutting tool performance. DRILL MOTORS FOR STANDS • Solid state electric switching. Drill Tap No Load Chuck Part No. Reg. • Automatic base/chip de-mag. Voltage Cap. Cap. AMPS RPM or Taper 1-828- Net Price SALE! • Automatic electronic soft-start. 120 1/2" 5/8"-18 6.2 600 Chuck -42531 $406.00 $365.40 • Computer controlled reverse. 120 3/4 1"-14 11.5 350 Chuck -42621 680.40 612.36 120 1-1/4 1"-14 11.5 750/375 #3MT -42921† 862.40 776.16 • Motor/magnet interlock. DRILL • Base control panel includes STAND • Two Speed Drills, 5/8"-11 or 1/2"-13 taps not recommended. variable speed adjusting for motor. † Drills except #42531 have dual mount gear case

34 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com Knife & Tool Precision Adjust Sharpener MK.2 Designed to Knife Sharpener™ sharpen every With Tri-Brasive™ and Pivot Response™ Two speed control with knife you own! precision angle sharpening Makes manual sharpening faster, guides that quickly toggle easier and more precise than ever! between the 25° angle for hunting and outdoor knives and the 20° angle for thinner blades and kitchen knives. FEATURES: • Tri-brasive™ rod quickly indexes between INCLUDES: coarse and fine diamond and fine ceramic stone. • 6 Pc. 1/2" x 12" abrasive belt kit • Tri-Brasive™ includes coarse 320 & fine 600 grit (2) P80 coarse grit, (2) P220 diamond plates and a fine grit ceramic stone. • Removable v-block clamp secures medium grit, (2) 6000 fine grit. Model #WSKTS2 Model #WSBCHPAJ • Adjustable knife sharpening guide with knife safely and consistently. Part No. 1-817-40303 serrated knife guide and scissor guide. Part No. 1-817-40402 $ 95 • Sharpening angle can be easily $ 95 • 3 Year Warranty. Reg. Net Price $99.95 79 adjusted from 15°- 30°, in 1° increments. Reg. Net Price $59.95 49 Precision Drill Bit Sharpener Special Use Files With 180 Grit Wheel

Restore bits 6" x 1/4" x 1/4" Metal Substrate FEATURES: to like-new • E-Z Align SystemTM. sharpness 6" x 1/4" FEATURES: DIAMOND SECTION • Sharpens 3/32-3/4" high-speed steel, in less than • A quick, easy way to masonry, carbide, and TiN-coated bits. 60 seconds! sharpen both cutlery and tools. Part No. • Custom points from 115°-140°. • Tougher, longer lasting, heat Grit 1-609- ONLY! • Adjustable Material Take-Off (MTO). treated diamond sharpening. • Creates split-point bits from standard bits. Model DD750X Fine (600) -11F $5.92 • Unique bonding of diamond Medium (270) -11M 7.19 • Quick change diamond sharpening wheel. Part No. 1-817-DD750X $ 95 surface to the substrate. Coarse (180) -11C 8.47 • 3 Year Warranty. Reg. Net Price $154.95 139

6" x 2" Diamond Credit Double Sided Card Stones 2" x 3-1/4" Diamond Stones Sharpens quickly. For use on hard material and stays flat. FEATURES: Reg. Net Price • A quick, easy way to sharpen Each 50.98 Part No. both cutlery and tools. Part No. Grit 1-609- ONLY! • Tougher, longer lasting, heat NOW ONLY! Grit 1-609- Super Fine (1200) -200 $10.17 treated diamond sharpening. Fine (600) & Medium (400) -DD6FM Fine (600) -201 10.17 • Unique bonding of diamond $ 33 Fine (600) & Coarse (250) -DD6FC Medium (400) -202 12.72 surface to the substrate. 43 Medium (400) & Coarse (250) -DD6MC Coarse (250) -203 15.26

Diamond SETS Part No. Reg. Hone & Stone Qty. Grit 1-609- Net Price SALE! Handle Part No. Grit Color 1-609- ONLY! Set of 3 Super Fine, Fine, -LPAK3 $16.12 $13.70 & Medium FEATURES: Super Fine (1200) Blue -LSF $5.06 • 2" x 3/4" diamond pad on a 6" x 3/4" Fine (600) Red -LF 5.06 Set of 4 Super Fine, Fine, -LPAK4 22.93 19.49 plastic handle. Medium (400) Purple -LM 6.34 Medium, & Coarse • Very effective in hard to get places carbide Coarse (250) Black -LC 7.61 Set of 5 Super Fine, Fine, Med., -LPAK5 29.72 25.26 table saw blades, router bits, deburring. Extra Coarse (150) Green -LXC 9.31 Coarse, Extra Coarse

4" India Abrasive Combination Coarse Fine Grit Files Aluminum Oxide Bench Stones

Smooth cutting and ideal when a close Crystalon (Silicon Carbide): tolerance is more important than the speed of cut. Fast cutting stone; ideal for general sharpening of cutting tools. Fast stock removal for quick edge Triangular sharpening with minimal loading. Abrasive Files Square Abrasive Files India (Aluminum Oxide): Smooth Used for a variety of deburring, cutting stone; ideal for clean deburring, chamfering and radiusing applications. Ideal for dimensioning keyways, generating keen edges and quality fine stoning faces, touching-up edges, finishes. Long lasting cutting edge. Part No and lapping/honing to close tolerance. Width Grit 1-632- ONLY! Crystalon India 1/4" Medium -86235 $10.80 Part No. Part No. Reg. Part No. Reg. 1/4 Fine -86230 10.80 Width Grit 1-632- ONLY! Size 1-632- Net Price NOW! 1-632- Net Price NOW! 3/8 Medium -86250 11.71 1/4" Medium -86070 $8.45 4" x 1" Round -85435 $32.80 $27.88 -85545 $30.57 $25.98 3/8 Fine -86245 11.71 1/4 Fine -86065 8.45 6 x 2 x 1 -85450 31.64 26.89 -85560 29.19 24.81 1/2 Medium -86265 11.88 3/8 Medium -86085 8.56 8 x 2 x 1 -85455 37.43 31.82 -85565 35.04 29.78 1/2 Fine -86260 11.88 3/8 Fine -86080 8.56 1/2 Medium -86100 8.63 1/2 Fine -86095 8.63 India Abrasive 5" x 1" x 3/16" Round Abrasive Files Aluminum Ideal for deburring, chamfering, Knife Blade Files Reamer Stone Oxide radiusing, honing, for cleaning radius tools, Quickly sharpen, hone and and for dimensioning compound curves. Durable, fast cutting maintain the edges and points of cutting tools. stone; ideal for imparting Part No. a professional edge Width Grit 1-632- ONLY! Part No. on reamers, taps Width Grit 1-632- ONLY! and rough rounders Part No. 1/4" Medium -86475 $13.42 $ 76 1/4 Fine -86470 13.42 1" x 1/8" Back Fine -86770 $15.26 on shoe machine tools. 1-632-87425 11

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 35 GET ONE 4 LOCATIONS TO SERVE YOU! TODAY! Showroom Hours: Monday to Friday 8am - 5pm Fast, Easy Product KBC Volume 52 Search and Filtering, Master Catalog Over 860 Pages of Exclusive Web Offers, our Best Products Mobile Friendly, PLUS thousands of New Items added! Real-time Inventory, Detroit Live Chat & More! To Request a Copy U.S.A Call 1-800-521-1740 or go to KBCTools.com 6300 18 Mile Rd. . Sterling Heights, MI 48314 H E Local Calls ...... (586) 979-0500 A S Fax Main Line .. (586) 979-4292 D Q R U ART E Hours: Monday to Friday 7am - 5pm PRST. STD. U.S. POSTAGE PAID Machinery Division KBC TOOLS 6465 18 Mile Road Sterling Heights, MI 48314 6300 18 MILE ROAD Local Calls ...... (586) 731-3600 STERLING HEIGHTS, MI 48314 Fax Main Line .. (586) 731-7464

Chicago 910 Busse Road Elk Grove Village, IL 60007 Local Calls ...... (847) 758-4400 Fax Main Line .. (847) 758-4110

Los Angeles 1021 S. Placentia Ave. Fullerton, CA 92831 Local Calls ...... (714) 278-0500 Fax Main Line .. (714) 278-0505 ATTN: PURCHASING DEPARTMENT PHONE HOURS: Mon-Fri. 8am - 8pm, EST

Solid Carbide Reamers STRAIGHT Carbide SHANK Inserts For general purpose reaming applications in ferrous metals and most non-ferrous materials. Precision ground with straight flutes STRAIGHT MICRO 100 is a space age, micro grain carbide for making smooth, accurate holes while retaining long tool life. FLUTE of excellent quality. It is in a class of its own, resulting from the exclusive treating process. DCMT CCMT Micro grain carbide has superior rupture strength for exceptional machining versatility. It is also highly shock resistant, it will not chip or break Decimal. Flute Part No. Reg. under normal machining conditions and Size Equiv. Length OAL 5-661- Net Price SALE! is unexcelled in interrupted cutting. 1/16" .0625" 3/8" 1-1/2" -018 $13.86 $11.78 It prolongs tool life in machining 1/8 .1250 5/8 2-1/4 -044 18.84 16.01 all hard stainless steels, and 3/16 .1875 7/8 2-3/4 -066 25.32 21.52 4 Flute below also efficiently performing 1/4 .2500 1 3 -087 33.72 28.66 1/4" diameter. in exotic metals. APKT 5/16 .3125 1-1/8 3-1/4 -100 45.36 38.56 6 Flute on 3/8 .3750 1-1/4 3-1/2 -111 54.42 46.26 larger sizes. TCMT 7/16 .4375 1-3/8 3-3/4 -117 70.68 60.08 APKT Inserts 1/2 .5000 1-3/8 4 -121 88.26 75.02 Insert Part No. Reg. Style I.C. L T r F 1-428- Net Price SALE! APKT 1003PDR .264" .413" .137" .020" .047" -502100 $11.25 $9.56

CCMT Inserts - 80o Diamond 6 Pc. Telescoping Insert Hole Corner Part No. Reg. Gage Set Style I.C. Dia. Thickness Radius 1-428- Net Price SALE! CCMT 21.51 1/4" .110" 3/32" 1/64" -501100 $10.15 $8.63 FEATURES: • Rigid handle with DCMT Inserts - 55o Diamond self-centering feature. • Satin chrome finish. Insert Hole Corner Part No. Reg. • Sizes 5/16"- 6" in plastic case. Style I.C. Dia. Thickness Radius 1-428- Net Price SALE! • Made of hardened tool steel. DCMT 21.51 1/4" .110" 3/32" 1/64" -501200 $10.75 $9.14 "DOUBLE ACTION" TCMT Inserts - 60o Triangle Part No. Self-Centering 8-412-004C Insert Hole Corner Part No. Reg. Style I.C. Dia. Thickness Radius 1-428- Net Price SALE! Reg. Net $ 58 Price $19.50 TCMT 21.51 1/4" .110" 3/32" 1/64" -501300 $9.05 $7.69 16

WEB:: PHONE: FAX: KBCTools.com 1-800-521-1740 1-800-322-4292