Hand Tools \ Gripping Pliers

$Hand Tools \ Gripping Pliers$

Hand tools \ Gripping pliers

Side cutter

Application: Advantage: For gripping, holding and cutting. . Ident. No. 710–730: Safe, ergonomic and eﬀ ortless work thanks to 2-component handles with slip guard Execution: . Ident. No. 910–930: Safe, ergonomic and fatigue-free working thanks to . Serrated gripping surfaces, inductively hardened blades two-component handles with hand guard . Ident. No. 510–730: . Special tool steel for hard and so wire Technical data: . Oil-hardened . Max. medium wire diameter cutting capacity: 1.6 mm . Ident. No. 910–930: . Tempered tool steel for hard and so wire . VDE type according to DIN EN 60900

Ident. No. 710–730 Ident. No. 910–930 Ident. No. 510–530

Length (mm) 160 180 200 160 180 200 160 180 Surface Bare Bare Bare Chrome-plated Chrome-plated Chrome-plated Chrome-plated Chrome-plated VDE certiﬁ ed No No No No No No Yes Yes Polyvinyl Polyvinyl Polyvinyl 2-component 2-component 2-component 2-component 2-component Material of the grip handle chloride chloride chloride plastic plastic plastic plastic plastic Ident. No. 510 520 530 710 720 730 910 920 53232... ● ● ● ● ● ● ● ● Length (mm) 200 Surface Chrome-plated VDE certiﬁ ed Yes 2-component Material of the grip handle plastic Ident. No. 930 53232... ● Prod. Gr. 597 Pliers sets Workshop and VDE

Execution: . VDE side-cutters, 160 mm, 2-component handles, chrome-plated head . Ident. No. 805: . VDE snipe nose pliers, straight, 200 mm, 2-component handles, chrome- . Combination pliers 180 mm, 2-component handles, chrome-plated head plated head . Side cutters, 160 mm, 2-component handles, chrome-plated head . VDE wire-stripping pliers, 160 mm, for 0.5 to 6 mm2, 2-component handles, . Snipe nose pliers 160 mm, 2-component handles, chrome-plated head chrome-plated head . Water pump pliers 250 mm, PVC-dipped handles, box joint, quick adjustment, . Ident. No. 970: polished surface . serrated gripping surfaces, inductively hardened blades . Ident. No. 805–965: Serrated gripping surfaces, inductively hardened blades . VDE combination pliers, 180 mm, 2-component handles, chrome-plated head . Ident. No. 808: . VDE side-cutters, 160 mm, 2-component handles, chrome-plated head . Combination pliers 200 mm, 2-component handles, chrome-plated head . VDE snipe nose pliers, straight, 160 mm, 2-component handles, chrome- . Side cutters, 160 mm, 2-component handles, chrome-plated head plated head . Snipe nose pliers, straight, 200 mm, 2-component handles, chrome-plated . VDE snipe nose pliers, curved, 160 mm, 2-component handles, chrome- plated head head 2 . Snipe nose pliers, bent, 200 mm, 2-component handles, chrome-plated head . VDE wire-stripping pliers, 160 mm, for 0.5 to 6 mm , 2-component handles, . Heavy-duty side-cutters 180 mm, 2-component handles, chrome-plated head chrome-plated head . Water pump pliers 250 mm, quick adjustment, 2-component handles, Delivery: chrome-plated head Ident. No. 805–965: In robust plastic case . Ident. No. 965: Ident. No. 970: in robust plastic case . VDE combination pliers, 180 mm, 2-component handles, chrome-plated head

Ident. No. 805 Ident. No. 808 Ident. No. 965 Ident. No. 970

VDE certiﬁ ed No No Yes Yes Number of pieces in assortment/set (PCS) 4 6 4 5 Ident. No. 805 808 965 970 53232... ● ● ● ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1391 Availability subject to country specific rules and regulations.

1391_EN_2018_KERN[21855012]-l.indd 1391 12/17/2018 3:36:06 PM Hand tools \ Gripping pliers

Combination pliers ( ISO 5746 )

Application: . Long cutting edges for thicker cables For gripping, holding and cutting. . Ident. No. 005–140: Polished head . Ident. No. 205–340: Chrome-plated pliers Execution: . Ident. No. 320–340: VDE type according to DIN EN 60900 . Special tool steel, forged and oil-hardened . Blades also inductively hardened for hard and so wire Advantage: . Gripping zones for ﬂ at and round material . Ident. No. 120–340: Safe, ergonomic and fatigue-free working thanks to two-component handles

Ident. No. 030 Ident. No. 130 Ident. No. 230 Ident. No. 330

Length (mm) 140 160 180 200 160 180 200 110 Surface Bare Bare Bare Bare Bare Bare Bare Chrome-plated VDE certiﬁ ed No No No No No No No No Polyvinyl Polyvinyl Polyvinyl Polyvinyl 2-component 2-component 2-component 2-component Material of the grip handle chloride chloride chloride chloride plastic plastic plastic plastic Max. medium wire Ø cutting capacity (mm) 2.8 3.1 3.4 3.8 3.1 3.4 3.8 2.5 Ident. No. 005 020 030 040 120 130 140 205 53068... ● ● ● ● ● ● ● ● Length (mm) 140 160 180 200 160 180 200 Surface Chrome-plated Chrome-plated Chrome-plated Chrome-plated Chrome-plated Chrome-plated Chrome-plated VDE certiﬁ ed No No No No Yes Yes Yes Material of the grip handle 2-component 2-component 2-component 2-component 2-component 2-component 2-component plastic plastic plastic plastic plastic plastic plastic Max. medium wire Ø cutting capacity (mm) 2.8 3.1 3.4 3.8 3.1 3.4 3.8 Ident. No. 210 220 230 240 320 330 340 53068... ● ● ● ● ● ● ● Prod. Gr. 535

Pliers sets Workshop and VDE

Execution: . Cobra 250-mm water pump pliers, dipped handles . combination pliers, 180 mm, 2-component . side cutters, 160 mm, 2-component handles, handles, polished head polished head

VDE certiﬁ ed No Number of pieces in assortment/set (PCS) 3 Ident. No. 003 53068... ● Prod. Gr. 535

Pointed combination pliers

Application: Technical data: For all common installation and repair tasks . Length: 145 mm . Max. medium wire diameter cutting capacity: 2 mm Execution: . Narrow head shape with tapered jaws . Gripping surfaces with special three-point contour for securely gripping ﬂ at parts . Easy cutting thanks to high-ratio power joint

Ident. No. 400 Ident. No. 410 Ident. No. 420

Surface Bare Chrome-plated Chrome-plated VDE certiﬁ ed No No Yes Material of the grip handle Polyvinyl chloride 2-component plastic 2-component plastic Ident. No. 400 410 420 53068... ● ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH 1392Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1391_EN_2018_KERN[21855012]-l.indd 1392 12/17/2018 3:36:07 PM Hand tools \ Gripping pliers

Combination pliers

Application: Execution: For gripping, holding and cutting. . Serrated gripping surfaces . Polished head Length (mm) 180 Surface Bare VDE certiﬁ ed No Material of the grip handle Polyvinyl chloride Max. medium wire Ø cutting capacity (mm) 2 Ident. No. 180 53233... ● Prod. Gr. 593 Heavy-duty side cutter

Application: Advantage: For gripping, holding and cutting. . 35% less force required when cutting piano wire

Execution: Technical data: . For hard and so and piano wire . Length: 200 mm . Serrated gripping surfaces . Max. medium wire diameter cutting capacity: 2.2 mm . Inductively hardened blades . Ident. No. 730: . Tempered tool steel . VDE type according to DIN EN 60900

Ident. No. 520 Ident. No. 720 Ident. No. 730

Surface Bare Chrome-plated Chrome-plated VDE certiﬁ ed No No Yes Material of the grip handle Polyvinyl chloride 2-component plastic 2-component plastic Ident. No. 520 720 730 53236... ● ● ● Prod. Gr. 597 Heavy-duty combination pliers Optimised power joint

Application: . Ident. No. 020: VDE type according to DIN EN for gripping, holding and cutting. 60900

Execution: Advantage: . power joint with up to 30% power saving . safe, ergonomic and eﬀ ortless work thanks to . secure retention of workpieces with 4-point invo- 2-component handles with slip guard lute burner hole . special tool steel for hard and so wire Technical data: . Length: 180 mm . serrated gripping surfaces, inductively hardened . Material of the grip handle: 2-component plastic blades . Max. medium wire diameter cutting capacity: 3.5 Ident. No. 010 . Ident. No. 010: with opening spring for optimal mm handling (simple to disassemble)

Surface Chrome-plated Chrome-plated VDE certiﬁ ed No Yes Ident. No. 010 020 53232... ● ● Prod. Gr. 597 Ident. No. 020

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1393 Availability subject to country specific rules and regulations.

1393_EN_2018_KERN[21855015]-w.indd 1393 12/17/2018 3:36:09 PM Hand tools \ Gripping pliers

Heavy-duty combination pliers ( ISO 5746 )

Application: Advantage: For gripping, holding and cutting. . For extremely heavy-duty use, 35% less force required thanks to improved lever ratios Execution: . Ident. No. 600–720: Safe, ergonomic and fatigue-free working thanks to . Special tool steel, forged and oil-hardened two-component handles . Blades also inductively hardened for hard and so wire . Gripping zones for ﬂ at and round material . Long cutting edges for thicker cables

Ident. No. 510 Ident. No. 610 Ident. No. 650 Ident. No. 710

Length (mm) 180 200 225 180 200 225 180 200 Surface Bare Bare Bare Bare Bare Bare Chrome-plated Chrome-plated VDE certiﬁ ed No No No No No No No No Polyvinyl Polyvinyl Polyvinyl 2-component 2-component 2-component 2-component 2-component Material of the grip handle chloride chloride chloride plastic plastic plastic plastic plastic Max. medium wire Ø cutting capacity (mm) 2.5 2.8 3 2.5 2.8 3 2.5 2.8 Ident. No. 500 510 520 600 610 620 650 660 53068... ● ● ● ● ● ● ● ● Length (mm) 180 200 225 Surface Chrome-plated Chrome-plated Chrome-plated VDE certiﬁ ed Yes Yes Yes 2-component 2-component 2-component Material of the grip handle plastic plastic plastic Max. medium wire Ø cutting capacity (mm) 2.5 2.8 3 Ident. No. 700 710 720 53068... ● ● ● Prod. Gr. 535 Flat nose pliers

Execution: Advantage: . Special tool steel, oil-hardened . Ident. No. 720: Safe, ergonomic and fatigue-free . Short, ﬂ at jaws working thanks to two-component handles with . Serrated gripping surface hand guard . Without blade Technical data: . Surface: Bare . Version: Short Ident. No. 510–520

Ident. No. 720

Length (mm) 140 160 160 Material of the grip handle Polyvinyl chloride Polyvinyl chloride 2-component plastic Ident. No. 510 520 720 53038... ● ● ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH 1394Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1393_EN_2018_KERN[21855015]-w.indd 1394 12/17/2018 3:36:09 PM Hand tools \ Gripping pliers

VDE ﬂ at-nose pliers

Execution: Advantage: . Tempered tool steel . Safe, ergonomic and fatigue-free working thanks to . Short, ﬂ at jaws two-component handles . Serrated gripping surface . Without blade . VDE type according to DIN EN 60900

Length (mm) 160 Surface Chrome-plated VDE certiﬁ ed Yes Material of the grip handle 2-component plastic Version Short Ident. No. 900 53040... ● Prod. Gr. 597

Round-nose pliers ( ISO 5745 )

Application: Advantage: For bending grommets with diﬀ erent radii for wire- . Ident. No. 720: Safe, ergonomic and fatigue-free shaped materials. working thanks to two-component handles with hand guard Execution: . Special tool steel, oil-hardened Technical data: . Short, round jaws . Version: Short Ident. No. 510–520 . For lugs with a diameter from 2.5 to 7.5 mm

Ident. No. 720

Length (mm) 140 160 160 Surface Bare Bare Chrome-plated Material of the grip handle Polyvinyl chloride Polyvinyl chloride 2-component plastic Ident. No. 510 520 720 53060... ● ● ● Prod. Gr. 597

VDE round pliers ( ISO 5745 )

Application: . For lugs with a diameter from 2.5 to 7.5 mm For bending grommets with diﬀ erent radii for wire- . VDE type according to DIN EN 60900 shaped materials. Advantage: Execution: . Safe, ergonomic and fatigue-free working thanks to . Tempered tool steel two-component handles . Short, round jaws Length (mm) 160 Surface Chrome-plated VDE certiﬁ ed Yes Material of the grip handle 2-component plastic Version Short Ident. No. 900 53062... ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1395 Availability subject to country specific rules and regulations.

1395_EN_2018_KERN[21855018]-q.indd 1395 12/17/2018 3:36:03 PM Hand tools \ Gripping pliers

Flat nose pliers ( ISO 5745 )

Execution: Advantage: . Chrome-vanadium electric steel, forged, oil-hardened . Ident. No. 050–090: Safe, ergonomic and fatigue-free working thanks to . Flat, short, wide jaws two-component handles . Serrated gripping surfaces Technical data: . Ident. No. 090: VDE type according to DIN EN 60900 . Version: Short

Ident. No. 010–030 Ident. No. 050–060 Ident. No. 090

Length (mm) 140 160 180 140 160 160 Surface Bare Bare Bare Bare Bare Chrome-plated VDE certiﬁ ed No No No No No Yes 2-component 2-component 2-component Material of the grip handle Polyvinyl chloride Polyvinyl chloride Polyvinyl chloride plastic plastic plastic Ident. No. 010 020 030 050 060 090 53069... ● ● ● ● ● ● Prod. Gr. 535 Round-nose pliers ( ISO 5745 )

Application: . Round, short jaws, ﬁ nely ground For bending grommets with diﬀ erent radii for wire-shaped materials. . Ident. No. 180: VDE type according to DIN EN 60900 Execution: Advantage: . Chrome-vanadium electric steel, forged, oil-hardened . Ident. No. 160–180: Safe, ergonomic and fatigue-free working thanks to two-component handles

Ident. No. 100 Ident. No. 160 Ident. No. 180

Length (mm) 160 160 160 Surface Bare Bare Chrome-plated VDE certiﬁ ed No No Yes Material of the grip handle Polyvinyl chloride 2-component plastic 2-component plastic Version Short Short Short Ident. No. 100 160 180 53069... ● ● ● Prod. Gr. 535 Snipe nose pliers

Application: . Ident. No. 530, 730, 930: Flat, round jaws, type B, 45° For gripping, holding and cutting. . Ident. No. 910–930: . Tempered tool steel Execution: . VDE type according to DIN EN 60900 . Serrated gripping surfaces . Blades inductively hardened for hard and so wire Advantage: . Ident. No. 500–520, 710–720, 910–920: Flat, round jaws, type A . Ident. No. 710–930: Safe, ergonomic and fatigue-free working thanks to two-component handles . Ident. No. 500–730: Special tool steel, oil-hardened

Ident. No. 710, 720 Ident. No. 730 Ident. No. 910, 920 Ident. No. 930 Ident. No. 500–520 Ident. No. 530

Version Straight Curved Length (mm) Surface VDE certiﬁ ed Material of the grip handle 53092... 53092... Ident. No. Ident. No. 140 Bare No Polyvinyl chloride 500 ● - - 160 Bare No Polyvinyl chloride 510 ● - - 200 Bare No Polyvinyl chloride 520 ● 530 ● 160 Chrome-plated No 2-component plastic 710 ● 715 ● 200 Chrome-plated No 2-component plastic 720 ● 730 ● 160 Chrome-plated Yes 2-component plastic 910 ● 915 ● 200 Chrome-plated Yes 2-component plastic 920 ● 930 ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH 1396Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1395_EN_2018_KERN[21855018]-q.indd 1396 12/17/2018 3:36:05 PM Hand tools \ Gripping pliers

Snipe-nose pliers ( ISO 5745 ) With blade

Application: . Blades also inductively hardened Suitable for more delicate gripping and cutting tasks. . Ident. No. 300–340: VDE type according to DIN EN 60900 Execution: Advantage: . Vanadium electric steel, forged, oil-hardened . Elastic tips, hold their shape, even in the event of twisting . Pointed, ﬂ at, round jaws . Ident. No. 100–340: Safe, ergonomic and fatigue-free working thanks to . Serrated gripping surfaces two-component handles

Ident. No. 010–040 Ident. No. 100–120, 205–210 Ident. No. 130–200, 220 Ident. No. 300–340

Version Straight Curved Length (mm) Surface VDE certiﬁ ed Material of the grip Max. medium wire Ø 53070... 53070... handle cutting capacity (mm) Ident. No. Ident. No. 140 Bare No Polyvinyl chloride 1.6 010 ● - - 160 Bare No Polyvinyl chloride 1.6 020 ● 015 ● 200 Bare No Polyvinyl chloride 2.2 030 ● 040 ● 140 Bare No 2-component plastic 1.6 100 ● - - 160 Bare No 2-component plastic 1.6 110 ● - - 200 Bare No 2-component plastic 2.2 120 ● 130 ● 160 Chrome-plated No 2-component plastic 1.6 205 ● 200 ● 200 Chrome-plated No 2-component plastic 2.2 210 ● 220 ● 160 Chrome-plated Yes 2-component plastic 1.6 300 ● 310 ● 200 Chrome-plated Yes 2-component plastic 2.2 320 ● 340 ● Prod. Gr. 535 Snipe-nose pliers

Application: Execution: Suitable for more delicate gripping and cutting tasks. . Flat, round jaws, pointed, straight shape . Serrated gripping surface . With blade Length (mm) 200 Surface Bare VDE certiﬁ ed No Material of the grip handle Polyvinyl chloride Version Straight Ident. No. 200 53095... ● Prod. Gr. 593 Telephone pliers ( ISO 5745 )

Execution: Advantage: . Chrome-vanadium electric steel, forged, . Ident. No. 110: oil-hardened . Safe, ergonomic and fatigue-free working thanks . Cross-toothed gripping surfaces to two-component handles . Can also be used as soldering pointed pliers thanks to particularly narrow, ﬁ ne tips Ident. No. 100

Ident. No. 110 Length (mm) 160 160 Jaw design Flat, pointed Pointed Surface Bare Chrome-plated Material of the grip handle Polyvinyl chloride 2-component plastic Ident. No. 100 110 53071... ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1397 Availability subject to country specific rules and regulations.

1397_EN_2018_KERN[21855022]-m.indd 1397 12/17/2018 3:36:00 PM Hand tools \ Gripping pliers

Electrical installation pliers

Application: . Bolted joint: precise, clearance-free plier For gripping ﬂ at and round material, for bending, movement deburring, cutting cables, stripping and crimping. Technical data: Execution: . Length: 255 mm . Special-grade tool steel, forged, oil-hardened . Material of the grip handle: 2-component plastic 2 . Crimp nest for wire end ferrules 0.5-2.5 mm2 . Min./max. stripper size: 0.75-2.5 mm Ident. No. 125 . Max. medium wire diameter cutting capacity: 15 . Cable shears with precision cutters mm

Surface Bare Chrome-plated Chrome-plated With opening spring Yes Yes No VDE certiﬁ ed No Yes Yes Ident. No. 110 120 125 53074... ● ● ● Prod. Gr. 535 Langbeck ﬂ at nose-pliers

Application: . Long, slim, ﬂ at jaws For gripping and holding in conﬁ ned areas. . Serrated gripping surfaces Execution: Advantage: . Special tool steel, oil-hardened . Ident. No. 710: Safe, ergonomic and fatigue-free working thanks to two-component handles

Ident. No. 500–510

Ident. No. 710 Length (mm) 140 160 160 Surface Bare Bare Chrome-plated Material of the grip handle Polyvinyl chloride Polyvinyl chloride 2-component plastic Ident. No. 500 510 710 53045... ● ● ● Prod. Gr. 597

VDE Langbeck ﬂ at nose-pliers

Application: . Serrated gripping surfaces For gripping and holding in confi ned areas. . VDE type according to DIN EN 60900 Execution: Advantage: . Tempered tool steel . Safe, ergonomic and fatigue-free working thanks to . Long, slim, fl at jaws two-component handles Length (mm) 160 Surface Chrome-plated VDE certifi ed Yes Material of the grip handle 2-component plastic Ident. No. 910 53046... ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH 1398Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1397_EN_2018_KERN[21855022]-m.indd 1398 12/17/2018 3:36:01 PM Hand tools \ Gripping pliers

Langbeck pliers ( ISO 5745 ) Without blade

Application: . Ident. No. 010–050, 100–200: Serrated gripping surfaces Ident. No. 010–050, 100–200: For gripping and holding in conﬁ ned areas. . Ident. No. 060, 210: Smooth-ground gripping surfaces Ident. No. 060, 210: For bending grommets with diﬀ erent radii for wire-shaped . Ident. No. 200–210: VDE type according to DIN EN 60900 materials. Advantage: Execution: . Ident. No. 100–210: Safe, ergonomic and fatigue-free working thanks to . Chrome-vanadium electric steel, forged, oil-hardened two-component handles . Heavy-duty and low-wear

Ident. No. 010, 040 Ident. No. 200 Ident. No. 210 Ident. No. 020, 050 Ident. No. 060 Ident. No. 100–110

Length (mm) 140 140 160 160 160 140 160 160 Surface Bare Bare Bare Bare Bare Chrome-plated Chrome-plated Chrome-plated VDE certiﬁ ed No No No No No No No Yes Polyvinyl Polyvinyl Polyvinyl Polyvinyl Polyvinyl 2-component 2-component 2-component Material of the grip handle chloride chloride chloride chloride chloride plastic plastic plastic Jaw design Flat Pointed Flat Pointed Round Pointed Pointed Flat Ident. No. 010 020 040 050 060 100 110 200 53072... ● ● ● ● ● ● ● ● Length (mm) 160 Surface Chrome-plated VDE certiﬁ ed Yes 2-component Material of the grip handle plastic Jaw design Round Ident. No. 210 53072... ● Prod. Gr. 535 Snipe nose pliers and spark-plug connector pliers, long version

Application: . Ident. No. 520: Long, bent by 35°, fl at, round jaws Ident. No. 500–520: For gripping and holding in diffi cult-to-reach areas. . Ident. No. 540: Ident. No. 540: For holding and loosening round, conical and angular objects. . Long, bent by 90°, fl at, round jaws . Fine-grooves with burner hole and special tip shape for 15-30-mm diameter Execution: . Special tool steel, oil-hardened Advantage: . Pulling round materials and handling particularly delicate workpieces . The optimum position of the centre of rotation guarantees safe and controlled gripping . Ident. No. 500: Long, straight, fl at, round jaws . Ident. No. 540: The hot engine block is not scorched thanks to the long design . Ident. No. 500–520: Finely ribbed with special profi le

Ident. No. 500 Ident. No. 520 Ident. No. 540

Curved gripping Version Straight Curved ring Length (mm) Surface Material of the grip handle 53054... 53054... 53054... Ident. No. Ident. No. Ident. No. 280 Chrome-plated Polyvinyl chloride 500 ● 520 ● 540 ● Prod. Gr. 597 Long-nose round pliers Long round jaws

Application: . Long, slim, round jaws For bending grommets with diﬀ erent radii for wire- . For bending lugs from 2.5 to 7.5 mm in diameter shaped materials. Advantage: Execution: . Ident. No. 710: Safe, ergonomic and fatigue-free . Special tool steel, oil-hardened working thanks to two-component handles

Ident. No. 510

Ident. No. 710

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1399 Availability subject to country specific rules and regulations.

1399_EN_2018_KERN[21855026]-s.indd 1399 12/17/2018 3:36:05 PM Hand tools \ Gripping pliers

Length (mm) 160 160 Surface Bare Chrome-plated Material of the grip handle Polyvinyl chloride 2-component plastic Version Long Long Ident. No. 510 710 53066... ● ● Prod. Gr. 597 VDE Langbeck round-nose pliers With long, round jaws

Application: . For bending lugs from 2.5 to 7.5 mm in diameter For bending grommets with diﬀ erent radii for wire- . VDE type according to DIN EN 60900 shaped materials. Advantage: Execution: . Safe, ergonomic and fatigue-free working thanks to . Tempered tool steel two-component handles . Long, slim, round jaws Length (mm) 160 Surface Chrome-plated VDE certiﬁ ed Yes Material of the grip handle 2-component plastic Version Long Ident. No. 900 53067... ● Prod. Gr. 597 Adjusting pliers ( DIN 5235 )

Application: Execution: For gripping components and wires with small diameters, as well as for bending . Chrome-vanadium electric steel contact and relay springs. . Polished gripping surfaces . Precisely deburred edges . Ident. No. 030: Jaws angled at 40°

Ident. No. 010 Ident. No. 020 Ident. No. 030

Length (mm) 135 135 135 Jaw design Flat, pointed Flat, wide Angled, ﬂ at, wide Surface Bare Bare Bare Material of the grip handle Polyvinyl chloride Polyvinyl chloride Polyvinyl chloride Ident. No. 010 020 030 53073... ● ● ● Prod. Gr. 535 Halogen bulb pliers

Application: Technical data: for mounting sensitive components and lamps . Length: 160 mm . Surface: Bare Execution: . Material of the grip handle: Polyvinyl chloride . polished gripping surfaces, tips with PVC-dipped coating

Ident. No. 200 53073... ● Prod. Gr. 535 Mechanic’s pliers

Application: . Cross-toothed gripping surfaces Ident. No. 010–020: For gripping and holding in . The pliers jaws and tips have a high level of diffi cult-to-reach areas. bending strength Ident. No. 030: for gripping and holding in diffi - . Ident. No. 030: cult-to-reach areas. . vanadium electric steel, forged, oil-hardened . fl at-round, long jaws Ident. No. 010 Execution: . cross-toothed gripping surfaces . Ident. No. 010–020: . special curved jaws angled 45° for gripping . Vanadium electric steel, forged, oil-hardened round parts . Flat-round, long jaws . pliers jaws and tips have a high fl exural strength

Ident. No. 020

Source: Hahn+Kolb Werkzeuge GmbH 1400Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1399_EN_2018_KERN[21855026]-s.indd 1400 12/17/2018 3:36:06 PM Hand tools \ Gripping pliers

Length (mm) 200 200 198 Surface Chrome-plated Chrome-plated Chrome-plated Material of the grip handle 2-component plastic 2-component plastic 2-component plastic Version Straight Oﬀ set Oﬀ set Ident. No. 010 020 030 53074... ● ● ● Prod. Gr. 535 Cone pliers ( ISO 5743 )

Execution: . Black atramentised pliers . Special tool steel, forged, oil-hardened . Head thickness: 3.5 mm . Straight, serrated gripping jaws Length (mm) 200 Surface Bare Material of the grip handle Polyvinyl chloride Gripper Ø, closed (mm) 6/10 Head design Straight Ident. No. 200 53075... ● Prod. Gr. 535 PowerGRIP plier wrench

Application: Advantage: For clearance-free, safe gripping of parallel surfaces. . Quick direct adjustment to workpiece via pushbutton Execution: . High ratio level for noticeably more manual force . High-quality, extremely heavy-duty overall design applied . Parallel jaws with no proﬁ le for surface-ﬁ nished workpieces Technical data: . Surface: Chrome-plated . Material of the grip handle: Polyvinyl chloride

Length (mm) 180 250 300 Width across ﬂ ats 36 mm 46 mm 60 mm Ident. No. 180 250 300 53074... ● ● ● Prod. Gr. 544 Pliers wrench ( ISO 5743 )

Application: . The stroke between the gripping jaws enables rapid tightening and loosening of For clearance-free, safe gripping of parallel surfaces. bolted connections using the ratchet principle . Also suitable for bending sheet metal or breaking tiles Execution: . High degree of clamping force due to 10x more manual force . Chrome-vanadium electric steel, forged, oil-hardened . Ident. No. 090–110: Safe, ergonomic and fatigue-free working thanks to . Flat, parallel gripping jaws two-component handles . Replaces a complete set of wrenches thanks to inﬁ nitely variable gripping of all wrench sizes Technical data: . Surface: Chrome-plated Advantage: . Quick direct adjustment to workpiece via pushbutton

Ident. No. 100 Ident. No. 002 Ident. No. 010, 030 Ident. No. 020 Ident. No. 110

Length (mm) 125 150 180 250 300 400 150 180 Width across ﬂ ats 23 mm 27 mm 35 mm 52 mm 60 mm 85 mm 27 mm 35 mm Polyvinyl Polyvinyl Polyvinyl Polyvinyl Polyvinyl Polyvinyl 2-component 2-component Material of the grip handle chloride chloride chloride chloride chloride chloride plastic plastic Ident. No. 002 005 010 020 030 040 090 100 53076... ● ● ● ● ● ● ● ● Length (mm) 250 Width across ﬂ ats 52 mm 2-component Material of the grip handle plastic Ident. No. 110 53076... ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1401 Availability subject to country specific rules and regulations.

1399_EN_2018_KERN[21855026]-s.indd 1401 12/17/2018 3:36:08 PM Hand tools \ Gripping pliers

Quick-adjustment locking pliers

Application: Advantage: For fl exible clamping of round and fl at material. . Optimum fl exibility thanks to 4x opening quick-adjustment mechanism Execution: . One-handed adjustment wheel integrated in the . Chrome-vanadium alloy handle . Jaw width 18 mm . Ergonomic so opening system

Length (mm) 250 Min./max. clamping width 0-100 mm Surface Chrome-plated Ident. No. 010 53419... ● Prod. Gr. 597

Locking pliers

Application: . Forged, hardened jaws For clamping round and ﬂ at material. . With adjusting screw and release lever

Execution: Technical data: . Chrome-vanadium steel . Surface: Nickel-plated Ident. No. 010–030

Ident. No. 040–060

Jaw design With prism With prism With prism With wire cutters With wire cutters With wire cutters Length (mm) 180 250 300 180 250 300 Min./max. clamping width 0-27 mm 0-32 mm 0-46 mm 0-27 mm 0-32 mm 0-46 mm Ident. No. 010 020 030 040 050 060 53420... ● ● ● ● ● ● Prod. Gr. 543

Automatic locking pliers

Application: . Simple and safe unlocking function — pliers remain closed until release For clamping round and ﬂ at material. actuated . Variable adjustment of clamping force Execution: . Chrome-vanadium steel Technical data: . Ident. No. 070: Long pointed jaws . Surface: Nickel-plated Advantage: . One-handed operation and with automatic adjustment

Ident. No. 070 Ident. No. 060 Ident. No. 100

Length (mm) 161 192 230 Min./max. clamping width 0-32 mm 0-44 mm 0-44 mm Ident. No. 060 070 100 53421... ● ● ● Prod. Gr. 569

Source: Hahn+Kolb Werkzeuge GmbH 1402Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1402_EN_2018_KERN[21855030]-u.indd 1402 12/17/2018 3:36:03 PM Hand tools \ Gripping pliers

Vice-grip pliers

Application: . With longitudinal groove in the upper jaw For clamping round and ﬂ at material. . With adjusting screw and release lever

Execution: Technical data: . Chrome-vanadium steel . Surface: Nickel-plated . Forged, tempered jaws Length (mm) 175 240 280 Min./max. clamping width 0-25 mm 0-32 mm 0-46 mm Ident. No. 175 250 280 53422... ● ● ● Prod. Gr. 530

Vice-grip pliers

Application: . Die-cast steel jaws For clamping sections and straps. . With adjusting screw and dip-insulated release lever Execution: . Chrome-vanadium steel Length (mm) 280 Min./max. clamping width 30-90 mm Surface Nickel-plated Ident. No. 010 53425... ● Prod. Gr. 530

Vice-grip pliers

Application: . Die-cast steel jaws For clamping pipes and round material. . With adjusting screw and dip-insulated release lever Execution: . Chrome-vanadium steel Length (mm) 280 Min./max. clamping width 10-90 mm Surface Nickel-plated Ident. No. 010 53426... ● Prod. Gr. 530

Locking pliers

Application: . Strong forged jaws For clamping bulky sections and brackets. . Opening depth: 75 mm . With adjusting screw and dip-insulated release Execution: lever . Chrome-vanadium steel Length (mm) 280 Min./max. clamping width 0-95 mm Surface Nickel-plated Ident. No. 010 53427... ● Prod. Gr. 530

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1403 Availability subject to country specific rules and regulations.

1402_EN_2018_KERN[21855030]-u.indd 1403 12/17/2018 3:36:04 PM Hand tools \ Gripping pliers

Locking pliers

Application: . Gentle clamping of delicate surfaces Ident. No. 020–030: For clamping the entire clamp- . Ident. No. 020–030: Clamping force can be ing range with jaws in parallel position. adjusted to over 4000 N Ident. No. 060: For centred clamping of round elements with the same diameter. Advantage: . Ident. No. 060: Two round elements of the same Execution: diameter are centred via the fork-shaped clamping . Chrome-vanadium steel, tempered arm and two v-blocks . Tempered rail Ident. No. 020–030 . Inﬁ nitely variable clamping Technical data: . Surface: Galvanised . Includes protective caps

Min./max. clamping width 0-100 mm 0-200 mm 0-110 mm Ident. No. 020 030 060 53427... ● ● ● Prod. Gr. 517

Ident. No. 060

Wire-twisting pliers

Application: Advantage: For quick and simple twirling of wires for screw . For clockwise and anti-clockwise rotation retainers. . With automatic return Execution: Technical data: . Chrome-vanadium steel . Surface: Burnished . Burnished and polished head . Roughened jaws for a secure hold, angled at 40° . With additional blade . For wires up to 1.6 mm

Length (mm) 230 280 Ident. No. 010 020 53137... ● ● Prod. Gr. 531

Lead sealing pliers

Application: Technical data: For pressing plastic and lead seals. . Surface: Nickel-plated . Material of the grip handle: Polyvinyl chloride Execution: . Robust tool steel . Nickel-plated . Handles coated in plastic

Length (mm) 150 220 Suitable for seal Ø (mm) 9 12 Ident. No. 145 225 53205... ● ● Prod. Gr. 543 Accessories for 53205 145 53205 225 53210... Plastic seals, orange, 9 Ident. No. 020 x 4.5 mm, pack of 1000 ● - Lead seals, 9 x 5 mm, 53210... Ident. No. 210 - pack of 1000 ● 53212... Spiral wire on roll, Ident. No. 011 011 weighs 1 kg ● ● 53212... Spiral wire on coil, Ident. No. 021 021 200-mm sections, weighs 1 kg ● ● 53212... Plastic spiral wire on Ident. No. 100 100 coil, 200-mm sections, weighs 1 kg ● ● Lead seals, 12 x 5 53210... Ident. No. - 220 mm, pack of 500 12 x 5 mm ●

Source: Hahn+Kolb Werkzeuge GmbH 1404Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1404_EN_2018_KERN[21855033]-q.indd 1404 12/17/2018 3:36:04 PM Hand tools \ Water pump pliers

Water pump pliers with large gripping range With box joint and double guide

Execution: . spring-driven sliding block ensures quicker . 30% larger gripping area engagement . enhanced self-clamping with optimised jaw design . opposing toothing at the back of the jaws ensures . ﬁ ne adjustment graduations owing to quick-snap aggressive gripping ratchet principle . inductively hardened, serrated jaws

Ident. No. 025

Ident. No. 250

Length (mm) Max. clamping width (mm) Surface Material of the grip handle 53413... Ident. No. 180 42 Bare Polyvinyl chloride 018 ● 250 50 Bare Polyvinyl chloride 025 ● 300 70 Bare Polyvinyl chloride 030 ● 180 42 Chrome-plated 2-component plastic 180 ● 250 50 Chrome-plated 2-component plastic 250 ● Prod. Gr. 597

Water pump pliers ( ISO 8976 ) With groove joint

Application: Technical data: For gripping pipes, screws or other workpieces. . Surface: Bare . Material of the grip handle: Polyvinyl chloride Execution: . Chrome-vanadium steel . Screwed grooved joint with pinch guard

Length (mm) 250 310 Max. clamping width (mm) 35 45 Ident. No. 020 030 53415... ● ● Prod. Gr. 597

Water pump pliers ( ISO 8976 ) with box joint

Application: . Safety pinching guard to prevent crushing injuries For gripping pipes, screws or other workpieces. . Painted red . Corrugated handles with yellow plastic coating Execution: . Chrome-vanadium steel, high-quality tempering Advantage: . Perforated slip joint, extremely robust thanks to . Self-locking on workpiece, energy-saving and double guide non-slip

Length (mm) 160 250 315 Max. clamping width (mm) 20 35 45 Ident. No. 490 500 510 53416... ● ● ● Prod. Gr. 595

Water pump pliers with box joint

Application: Advantage: For rapid gripping of pipes, screws or other . Self-clamping on pipes and nuts workpieces. . Precision adjustment using the pliers handle directly on workpiece, one-handed operation Execution: . Optimum force distribution thanks to the ﬂ exible . Chrome-vanadium steel joint disc . With perforated joint and pinch guard in all settings Length (mm) 250 Max. clamping width (mm) 40 Surface Bare Material of the grip handle Polyvinyl chloride Ident. No. 110 53417... ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1405 Availability subject to country specific rules and regulations.

1404_EN_2018_KERN[21855033]-q.indd 1405 12/17/2018 3:36:10 PM Hand tools \ Water pump pliers

Water pump pliers with box joint

Application: Advantage: For rapid gripping of pipes, screws or other . Safe, ergonomic and fatigue-free working thanks to workpieces. two-component handles . Quick to make adjustments using the ﬁ ne grada- Execution: tion with 13x notches . Chrome-vanadium steel . Self-clamping with optimal jaw design . With perforated joint and pinch guard in all settings Length (mm) 250 Max. clamping width (mm) 40 Surface Chrome-plated Material of the grip handle 2-component plastic Ident. No. 120 53417... ● Prod. Gr. 597 Water pump pliers with box joint

Application: . With perforated joint and pinch guard in all settings For rapid gripping of pipes, screws or other . Extra-hardened teeth workpieces. Advantage: Execution: . Quick and secure adjustment via pushbutton . Chrome-vanadium steel . Self-clamping on pipes and nuts Length (mm) 250 Max. clamping width (mm) 40 Surface Chrome-plated Material of the grip handle Polyvinyl chloride Ident. No. 130 53417... ● Prod. Gr. 597 VDE water-pump pliers with box joint

Application: Advantage: For rapid gripping of pipes, screws or other . Safe, ergonomic and fatigue-free working thanks to workpieces. two-component handles . Precision adjustment using the pliers handle Execution: directly on workpiece, one-handed operation . Chrome-vanadium steel . With perforated joint and pinch guard in all settings . VDE type according to DIN EN 60900 Length (mm) 250 Max. clamping width (mm) 40 Surface Chrome-plated Material of the grip handle 2-component plastic VDE certiﬁ ed Yes Ident. No. 150 53417... ● Prod. Gr. 597 Pipe gripping pliers with and without protective jaws (Siphon pliers, connector pliers)

Application: . Ident. No. 009: Ident. No. 004: For gripping pipes and for tightening . Chrome-vanadium electric steel, forged, and loosening pipe connections. oil-hardened Ident. No. 009: For gripping pipes and for tightening . Adjustable hinge, replaceable plastic protective and loosening plastic pipe connections. jaws . Ident. No. 105: For protecting the surface Ident. No. 105: replacement protective jaws for Ident. No. 004 gripping pliers no. 53075 009 and 011 Delivery: Execution: Ident. No. 105: 2 pairs . Ident. No. 004: . Chromium-vanadium electric steel, forged, oil-hardened . Adjustable hinge, toothed gripper jaws Ident. No. 009

Length (mm) 250 250 - Max. clamping width (mm) 80 75 - Surface Bare Bare - Material of the grip handle Polyvinyl chloride Polyvinyl chloride - Ident. No. 004 009 105 53075... ● ● ●

Prod. Gr. 535 Accessories for 53075 009 53075... Spare protective jaws Ident. No. 105 for pipe gripping pliers 2 pairs ●

Source: Hahn+Kolb Werkzeuge GmbH 1406Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1404_EN_2018_KERN[21855033]-q.indd 1406 12/17/2018 3:36:11 PM Hand tools \ Water pump pliers

Smart Grip water pump pliers ( ISO 8976 )

Execution: Advantage: . Chrome-vanadium electric steel, forged, . Optimum one-handed operation for right and le - oil-hardened handed use thanks to fully automatic adjustment . Box joint, excellent stability thanks to double guide to the workpiece size and pinch guard in all settings . Self-locking on pipes and nuts, energy-saving work . Grey atramentised pliers process Length (mm) 250 Max. clamping width (mm) 36 Surface Bare Material of the grip handle Polyvinyl chloride Ident. No. 025 53077... ● Prod. Gr. 535

Cobra gripping pliers ( ISO 8976 ) with box joint

Execution: Advantage: . Chrome-vanadium electric steel, forged, . Pointed and slender jaw shape for conﬁ ned spaces oil-hardened . Direct adjustment to workpiece via pushbutton . Box joint, excellent stability thanks to double guide . Self-locking on pipes and nuts, energy-saving work and pinch guard in all settings process . Favourable leverage, optimum force transmission Length (mm) 250 Max. clamping width (mm) 42 Surface Bare Material of the grip handle Polyvinyl chloride Ident. No. 025 53078... ● Prod. Gr. 535

Cobra QuickSet pliers ( ISO 8976 ) with box joint

Execution: Advantage: . Chrome-vanadium electric steel, forged, . To adjust, simply push the pliers onto the work- oil-hardened piece and the locking piece directly engages with . Box joint, excellent stability thanks to double guide initial pressure and pinch guard in all settings . Self-locking on pipes and nuts, energy-saving work . To activate the push function again, open the pliers process all the way and push the button Length (mm) 250 Max. clamping width (mm) 46 Surface Black atramentised Material of the grip handle Polyvinyl chloride Ident. No. 250 53078... ● Prod. Gr. 535

Spring band clamp pliers with box joint

Application: . Box joint, excellent stability thanks to double guide for standard, compact and wire clamps and spring and pinch guard in all settings band rings Advantage: Execution: . Rotating, universal gripping inserts for secure . Chrome-vanadium electric steel, forged, clamp grip in any position Ident. No. 010 oil-hardened Length (mm) 180 250 Max. clamping width (mm) 50 70 Surface Bare Bare Ident. No. 005 010 53079... ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1407 Availability subject to country specific rules and regulations.

1404_EN_2018_KERN[21855033]-q.indd 1407 12/17/2018 3:36:12 PM Hand tools \ Water pump pliers

Cobra Hightech water pump pliers Patented slip joint with double guide

Application: . chrome-plated pliers Ident. No. 002–010, 020–030, 040–060, 070–100: For gripping pipes, screws . Ident. No. 020, 040–045: Polished head or other workpieces. . Ident. No. 050–055: Chrome-plated pliers Ident. No. 015, 035, 065: for gripping pipes, screws or other workpieces. . Ident. No. 100: VDE type according to DIN EN 60900 Execution: Advantage: . Ident. No. 002–010, 020–030, 040–045, 060, 070–080: Grey atramentised . Ident. No. 002–010, 020–030, 040–060, 070–100: pliers . Direct adjustment to workpiece via pushbutton . Ident. No. 002–010, 020–030, 040–060, 070–100: . Self-locking on pipes and nuts, energy-saving work process . Chrome-vanadium electric steel, forged, oil-hardened . Favourable leverage, optimum force transmission . Box joint, excellent stability thanks to double guide and pinch guard in all . Ident. No. 015, 035, 065: settings . adjust to workpiece using pushbutton . Ident. No. 015, 035, 065: . self-locking on pipes and nuts, energy-saving work process . chromium-vanadium electric steel, forged, oil-hardened . excellent leverage, optimum force transmission . box joint, excellent stability thanks to double guide and pinch guard in all . Ident. No. 020, 040–055, 100: Safe, ergonomic and fatigue-free working settings thanks to two-component handles

Ident. No. 002–010, 030, Ident. No. 020, 040–045 Ident. No. 035 Ident. No. 050–055 060, 070–080 Ident. No. 100

Length (mm) 125 150 180 180 180 250 250 250 Max. clamping width (mm) 27 30 36 36 36 50 50 50 Surface Bare Bare Bare Chrome-plated Bare Bare Chrome-plated Bare Polyvinyl Polyvinyl Polyvinyl Polyvinyl 2-component Polyvinyl Polyvinyl 2-component Material of the grip handle chloride chloride chloride chloride plastic chloride chloride plastic VDE certiﬁ ed No No No No No No No No Ident. No. 002 005 010 015 020 030 035 040 53081... ● ● ● ● ● ● ● ● Length (mm) 250 250 300 300 300 300 400 560 Max. clamping width (mm) 50 50 60 60 60 60 95 120 Surface Chrome-plated Chrome-plated Bare Chrome-plated Bare Chrome-plated Bare Bare 2-component 2-component Polyvinyl Polyvinyl 2-component 2-component Polyvinyl Polyvinyl Material of the grip handle plastic plastic chloride chloride plastic plastic chloride chloride VDE certiﬁ ed No Yes No No No No No No Ident. No. 050 100 060 065 045 055 070 080 53081... ● ● ● ● ● ● ● ● Prod. Gr. 535 Slip joint pliers

Execution: Advantage: . Chrome-vanadium steel, drop-forged . Pinch guard provides added safety . Inductively hardened jaw . Self-clamping with optimised jaw design . With box joint and 13x notches . Non-slip and gentle to edges due to play-free frictional connection Length (mm) 260 Width across ﬂ ats 36 mm Surface Chrome-plated Material of the grip handle Polyvinyl chloride Ident. No. 500 53417... ● Prod. Gr. 597 Alligator® water pump pliers ( ISO 8976 ) with box joint

Application: Advantage: For gripping pipes, screws or other workpieces. . Self-locking on pipes and nuts, energy-saving work process . Slim head and joint area provides excellent access to the workpiece Execution: . Consistently safe gripping and excellent resistance to wear thanks to gripping . Chrome-vanadium electric steel, forged, oil-hardened surfaces with specially hardened teeth . Box joint, excellent stability thanks to double guide and pinch guard in all . Robust design, resistant to soiling settings . Ident. No. 600–710: Safe, ergonomic and fatigue-free working thanks to . PVC-dipped handles Ident. No. 500–530: two-component handles . Ident. No. 710: VDE type according to DIN EN 60900

Ident. No. 500–530 Ident. No. 600–620 Ident. No. 710

Source: Hahn+Kolb Werkzeuge GmbH 1408Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1408_EN_2018_KERN[21855039]-l.indd 1408 12/17/2018 3:36:04 PM Hand tools \ Water pump pliers

Length (mm) 180 250 300 400 180 250 300 250 Max. clamping width (mm) 30 50 60 90 50 50 60 50 Surface Bare Bare Bare Bare Chrome-plated Chrome-plated Chrome-plated Chrome-plated Polyvinyl Polyvinyl Polyvinyl Polyvinyl 2-component 2-component 2-component 2-component Material of the grip handle chloride chloride chloride chloride plastic plastic plastic plastic VDE certiﬁ ed No No No No No No No Yes Ident. No. 500 510 520 530 600 610 620 710 53081... ● ● ● ● ● ● ● ● Prod. Gr. 535 Mini water pump pliers ( ISO 8976 ) With groove joint

Execution: Advantage: . Chrome-vanadium electric steel, forged, . Joint does not slip thanks to milled rotating plates oil-hardened . Less strain on the hinge screw thanks to the design . Pinch guard prevents crushing injuries Length (mm) 125 Max. clamping width (mm) 14 Surface Chrome-plated Polyvinyl Material of the grip handle chloride Ident. No. 003 53081... ● Prod. Gr. 535 Water pump pliers ( ISO 8976 ) With groove joint

Application: . Less strain on the hinge screw thanks to the design For gripping pipes, screws or other workpieces. . Pinch guard prevents crushing injuries . Self-locking on pipes and nuts, energy-saving work Execution: process . Chrome-vanadium electric steel, forged, Ident. No. 010 . Ident. No. 010: Consistently safe gripping and oil-hardened excellent resistance to wear thanks to gripping . Ident. No. 010: Black atramentised pliers surfaces with specially hardened teeth Advantage: . Ident. No. 100: Safe, ergonomic and fatigue-free . Joint does not slip thanks to milled rotating plates working thanks to two-component handles

Ident. No. 100

Length (mm) 250 250 Max. clamping width (mm) 36 36 Surface Bare Chrome-plated Material of the grip handle Polyvinyl chloride 2-component plastic Ident. No. 010 100 53090... ● ● Prod. Gr. 535 Water pump pliers ( ISO 8976 ) with box joint

Execution: . Integrated pinch guard prevents injuries . Chrome-vanadium steel . Possible to use with just one hand . Black atramentised surface . Inductively hardened, serrated jaws . Convenient and quick adjustments using the tip/ step lever function Length (mm) 260 Max. clamping width (mm) 50 Surface Bare Polyvinyl Material of the grip handle chloride Ident. No. 250 53419... ● Prod. Gr. 569

Water pump pliers S-GRIP slip joint

Execution: Advantage: . Chrome-vanadium steel, high-quality tempering . Inductively hardened gripping surfaces . Box slip joint with double support and pinch guard . S-GRIP: Quick to adjust on workpiece via . Continuous, smooth adjustment pushbutton . Self-locking on workpiece, energy-saving and Length (mm) 250 non-slip Max. clamping width (mm) 45 Surface Bare Polyvinyl Material of the grip handle chloride Ident. No. 125 53412... ● Prod. Gr. 544

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1409 Availability subject to country specific rules and regulations.

1408_EN_2018_KERN[21855039]-l.indd 1409 12/17/2018 3:36:05 PM Hand tools \ Water pump pliers

Water pump pliers ( ISO 8976 ) with box joint

Execution: Technical data: . Chrome-vanadium steel . Surface: Bare . Painted red . Material of the grip handle: Steel . Serrated gripping surfaces

Length (mm) 250 300 Max. clamping width (mm) 40 50 Ident. No. 250 300 53418... ● ● Prod. Gr. 593

Pipe wrench, Swedish form ( DIN 5234 ) Chromium-vanadium steel

Application: . Wide head For gripping pipes and pipe collars. . Ident. No. 030–040: Wide, ground jaw Execution: Advantage: . Swedish type, head angled by 90° . Self-clamping on the workpiece . Teeth inductively hardened . Safety pinching guard to prevent crushing injuries . Painted red . Nuts cannot be lost . Ident. No. 010–020: . Fully forged, high-quality tempering Technical data: . Ribbed handle . Material of the grip handle: Steel

Size in inches 1 1.5 2 3 4 Length (mm) 310 425 540 685 815 Max. clamping width (mm) 49 65 84 110 140 Ident. No. 010 015 020 030 040 53430... ● ● ● ● ● Prod. Gr. 544

Pipe wrench ( DIN 5234 ) Chrome-vanadium steel, Swedish type

Application: Advantage: For gripping pipes and pipe collars. . Teeth oﬀ set against direction of rotation . Pinching guard Execution: . Adjustment nut can be locked . Chrome-vanadium steel, forged, tempered . Swedish type, head angled by 90° Technical data: . Teeth also inductively hardened . Surface: Cathodic dip painting . Material of the grip handle: Steel

Size in inches 1 1.5 2 Length (mm) 310 425 540 Max. clamping width (mm) 49 68 94 Ident. No. 600 610 620 53430... ● ● ● Prod. Gr. 595

Elbow pipe wrench ( DIN 5234 ) Chromium-vanadium steel, Swedish form

Application: Advantage: For gripping pipes and pipe collars. . Self-clamping on the workpiece . Secure, 3-point support, even on smooth pipes Execution: . Safety pinching guard to prevent crushing injuries . Fully forged, high-quality tempering . Nuts cannot be lost . Swedish type, head angled by 45° . Narrow model Technical data: . Painted red . Material of the grip handle: Steel Size in inches 0.5 1 1.5 2 3 Length (mm) 240 320 445 565 705 Max. clamping width (mm) 36 55 81 94 110 Ident. No. 005 010 015 020 030 53431... ● ● ● ● ● Prod. Gr. 544

Source: Hahn+Kolb Werkzeuge GmbH 1410Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1408_EN_2018_KERN[21855039]-l.indd 1410 12/17/2018 3:36:06 PM Hand tools \ Water pump pliers

Elbow pipe wrench ( DIN 5234 ) Chromium-vanadium steel, Swedish form

Application: Advantage: For gripping pipes and pipe collars. . Teeth oﬀ set against direction of rotation . Pinching guard Execution: . Adjustment nut can be locked . Forged and tempered . Swedish type, head angled by 45° Technical data: . Teeth also inductively hardened . Surface: Cathodic dip painting . Material of the grip handle: Steel

Size in inches 1 1.5 2 Length (mm) 320 445 565 Max. clamping width (mm) 55 81 94 Ident. No. 600 610 620 53431... ● ● ● Prod. Gr. 595 Elbow pipe wrench ( DIN 5234 ) Swedish form

Application: Advantage: For gripping pipes and pipe collars. . Teeth oﬀ set against direction of rotation . Pinching guard Execution: . Adjustment nut can be locked . Chrome-vanadium steel, forged, tempered . Swedish type, S-shaped jaws Technical data: . Teeth also inductively hardened . Surface: Cathodic dip painting . Material of the grip handle: Steel

Size in inches 1 1.5 2 Length (mm) 320 440 560 Max. clamping width (mm) 55 68 85 Ident. No. 600 610 620 53434... ● ● ● Prod. Gr. 595

Eck-Schwede-snap® elbow pipe wrench ( DIN 5234 )

Execution: . Chrome-vanadium steel, drop-forged, tempered Technical data: . Heavy-duty, three-point pipe wrench . Material of the grip handle: Steel . Teeth additionally hardened . Blue enamel paint

Size in inches 0.5 1 1.5 2 3 Length (mm) 245 320 420 550 630 Max. clamping width (mm) 35 48 60 80 110 Ident. No. 005 010 015 020 030 53432... ● ● ● ● ● Prod. Gr. 557

ABC X-GRIP pipe wrench ( DIN 5234 )

Application: . Self-clamping on the workpiece for energy-saving For ﬂ exible gripping of pipes, screws or other working processes workpieces. . Nuts cannot be lost . Safety pinching guard to prevent crushing injuries Execution: . Handle with non-slip plastic coating, ideal even in . Chrome-vanadium steel, fully forged, high-quality cold temperatures tempering . Teeth inductively hardened Technical data: . Polished jaw . Size in inches: 2 . Painted black . Length: 560 mm . Max. clamping width: 100 mm Advantage: . Material of the grip handle: Polyvinyl chloride . Secure gripping using the special X-Grip-shaped jaws, type A, B and C, angled 45° in pliers

Ident. No. 560 53436... ● Prod. Gr. 544

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1411 Availability subject to country specific rules and regulations.

1411_EN_2018_KERN[21855043]-o.indd 1411 12/17/2018 3:36:05 PM Hand tools \ Water pump pliers

Chain pipe wrench

Application: . Heavy-duty steel chain For holding and turning pipes. . Painted red Execution: Advantage: . Special steel . Powerful thanks to maximum lever action . Hardened interchangeable jaws with serration on both sides Technical data: . Strong, forged handle . Surface of the handle: Lacquered

Size in inches 1.5 2.5 4 6 Length (mm) 510 710 915 1065 Chain length (mm) 380 490 610 850 Ident. No. 020 030 040 050 53440... ● ● ● ● Prod. Gr. 544

Heavy-duty pipe wrenches Robust cast iron design

Execution: Technical data: . Double T-handle with moving, forged hook jaws. . Surface: Lacquered . Self-cleaning thread . Material of the grip handle: Steel . Single-handed actuation entirely possible

Size in inches 5 6 Length (mm) 900 1200 Max. clamping width (mm) 125 150 Ident. No. 140 150 53437... ● ● Prod. Gr. 514 High-performance pipe wrench Aluminium body

Execution: Technical data: . Double T-handle with moving, forged hook jaws. . Surface: Lacquered . Self-cleaning thread . Material of the grip handle: Aluminium . Single-handed actuation entirely possible

Size in inches 1.5 2.5 Length (mm) 250 450 Max. clamping width (mm) 40 65 Ident. No. 200 220 53437... ● ● Prod. Gr. 514 Straight retaining ring pliers For internal circlips

Application: Advantage: For mounting and removing inner retaining rings in . Hardened and wearproof tips securely hold the drill holes. rings

Execution: Technical data: . Chrome-vanadium steel . Head design: Straight . Polished joint . Surface: Bare . Burnished tips . Material of the grip handle: Polyvinyl chloride . Straight tips according to DIN 5256 C Type J 0 J 1 J 2 J 3 J 4 Length (mm) 140 140 180 225 310 Suitable for min./max. Ø 8-13 mm 12-25 mm 19-60 mm 40-100 mm 85-140 mm Ident. No. 500 510 520 530 540 53136... ● ● ● ● ● Prod. Gr. 597

Circlip pliers, angled for internal circlips

Application: Advantage: For mounting and removing inner retaining rings in . Hardened and wearproof tips securely hold the drill holes. rings

Source: Hahn+Kolb Werkzeuge GmbH 1412Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1411_EN_2018_KERN[21855043]-o.indd 1412 12/17/2018 3:36:06 PM Hand tools \ Retaining ring pliers

Type J 01 J 11 J 21 J 31 J 41 Length (mm) 140 140 180 225 310 Suitable for min./max. Ø 8-13 mm 12-25 mm 19-60 mm 40-100 mm 85-140 mm Ident. No. 500 510 520 530 540 53137... ● ● ● ● ● Prod. Gr. 597

Circlip pliers, straight For external circlips

Application: Advantage: For mounting and removing outer retaining rings on . Hardened and wearproof tips securely hold the s h a s . rings

Type A 0 A 1 A 2 A 3 A 4 Length (mm) 140 140 180 225 310 Suitable for min./max. Ø 3-10 mm 10-25 mm 19-60 mm 40-100 mm 85-140 mm Ident. No. 510 520 530 540 550 53145... ● ● ● ● ● Prod. Gr. 597

Circlip pliers, angled For external circlips

Application: Advantage: For mounting and removing outer retaining rings on . Hardened and wearproof tips securely hold the s h a s . rings

Execution: Technical data: . Chrome-vanadium steel . Head design: Angled 90° . Polished joint . Surface: Bare . Burnished tips . Material of the grip handle: Polyvinyl chloride . Angled tips according to DIN 5254 B Type A 01 A 11 A 21 A 31 A 41 Length (mm) 140 140 180 225 310 Suitable for min./max. Ø 3-10 mm 10-25 mm 19-60 mm 40-100 mm 85-140 mm Ident. No. 510 520 530 540 550 53148... ● ● ● ● ● Prod. Gr. 597

Retaining ring pliers sets

Application: Delivery: For mounting and removing inner and outer retaining rings. Ident. No. 010: In box with one of each: J 1, J 2, J 11, J 21, A 1, A 2, A 11, A 21 Ident. No. 020: In roll-up pouch, with 1x: J 2, J 21, A 2, A 21 Execution: Ident. No. 030: In roll-up pouch, with 1x: J 1, J 2, J 11, J 21, A 1, A 2, A 11, A 21 . Chrome-vanadium steel . Polished joint Technical data: . Burnished tips . Material of the grip handle: Polyvinyl chloride Advantage: . Hardened and wearproof tips securely hold the rings

Ident. No. 010 Ident. No. 020 Ident. No. 030

Number of pieces in assortment/set (PCS) 8 4 8 Container Carton Pocket package Pocket package Ident. No. 010 020 030 53135... ● ● ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1413 Availability subject to country specific rules and regulations.

1411_EN_2018_KERN[21855043]-o.indd 1413 12/17/2018 3:36:12 PM Hand tools \ Retaining ring pliers

Retaining ring pliers ( DIN 5256 ) For internal circlips

Application: Advantage: For mounting and removing inner retaining rings in . Non-slip, robust tips drill holes. Technical data: Execution: . Surface: Black atramentised . Chrome-vanadium steel, forged, oil-hardened . Material of the grip handle: Polyvinyl chloride Ident. No. 010–050 . Polished head

Ident. No. 060–100 Type J 0 J 1 J 2 J 3 J 4 J 01 J 11 J 21 Length (mm) 140 140 180 225 320 130 130 170 Suitable for min./max. Ø 8-13 mm 12-25 mm 19-60 mm 40-100 mm 85-140 mm 8-13 mm 12-25 mm 19-60 mm Head design Straight Straight Straight Straight Straight Angled 90° Angled 90° Angled 90° Ident. No. 010 020 030 040 050 060 070 080 53091... ● ● ● ● ● ● ● ● Type J 31 J 41 Length (mm) 210 300 Suitable for min./max. Ø 40-100 mm 85-140 mm Head design Angled 90° Angled 90° Ident. No. 090 100 53091... ● ● Prod. Gr. 535

Retaining ring pliers ( DIN 5254 ) For external circlips

Application: Advantage: For mounting and removing outer retaining rings on . Non-slip, robust tips s h a s . Technical data: Execution: . Surface: Black atramentised . Chrome-vanadium steel, forged, oil-hardened . Material of the grip handle: Polyvinyl chloride . Polished head Ident. No. 110–150

Ident. No. 160–200

Type A 0 A 1 A 2 A 3 A 4 A 01 A 11 A 21 Length (mm) 140 140 180 210 320 125 125 170 Suitable for min./max. Ø 3-10 mm 10-25 mm 19-60 mm 40-100 mm 85-140 mm 3-10 mm 10-25 mm 19-60 mm Head design Straight Straight Straight Straight Straight Angled 90° Angled 90° Angled 90° Ident. No. 110 120 130 140 150 160 170 180 53091... ● ● ● ● ● ● ● ● Type A 31 A 41 Length (mm) 200 300 Suitable for min./max. Ø 40-100 mm 85-140 mm Head design Angled 90° Angled 90° Ident. No. 190 200 53091... ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH 1414Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1411_EN_2018_KERN[21855043]-o.indd 1414 12/17/2018 3:36:13 PM Hand tools \ Retaining ring pliers

Circlip pliers sets For internal and external circlips

Application: Delivery: for mounting and removing inner and outer circlips. Ident. No. 250: in roll-up pouch with 1x: J 1, J 2, A 1, A 2 Execution: Ident. No. 260: in roll-up pouch with 1x: J 1, J 2, J 11, . chrome vanadium steel, forged, oil-hardened J 21, A 1, A 2, A 11, A 21 . polished head . non-slip, robust tips Technical data: . Material of the grip handle: Polyvinyl chloride

Ident. No. 250 Number of pieces in assortment/set (PCS) 4 8 Pocket Container Roll package Ident. No. 250 260 53091... ● ● Prod. Gr. 535

Ident. No. 260

Precision retaining ring pliers with inlaid spring steel wire tips For internal circlips

Application: Advantage: For mounting and removing inner retaining rings in . Safe working processes with inlaid tips drill holes. . For heavy-duty use, even in continuous operation, up to 10x longer service life compared to turned Execution: tips . Chrome-vanadium electric steel, forged, oil-hardened Technical data: Ident. No. 500–540 . Inlaid tips, spring steel wire, drawn . Surface: Grey atramentised . Material of the grip handle: Polyvinyl chloride

Ident. No. 550–590

Type J 0 J 1 J 2 J 3 J 4 J 01 J 11 J 21 Length (mm) 140 140 180 225 320 130 130 170 Suitable for min./max. Ø 8-13 mm 12-25 mm 19-60 mm 40-100 mm 85-140 mm 8-13 mm 12-25 mm 19-60 mm Head design Straight Straight Straight Straight Straight Angled 90° Angled 90° Angled 90° Ident. No. 500 510 520 530 540 550 560 570 53091... ● ● ● ● ● ● ● ● Type J 31 J 41 Length (mm) 210 300 Suitable for min./max. Ø 40-100 mm 85-140 mm Head design Angled 90° Angled 90° Ident. No. 580 590 53091... ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1415 Availability subject to country specific rules and regulations.

1415_EN_2018_KERN[21855048]-s.indd 1415 12/17/2018 3:36:05 PM Hand tools \ Retaining ring pliers

Precision circlip pliers with inserted spring steel wire tips ( DIN 5254 ) For external circlips

Application: Advantage: For mounting and removing outer retaining rings on . Safe working processes with inlaid tips s h a s . . For heavy-duty use, even in continuous operation, up to 10x longer service life compared to turned Execution: tips . Chrome-vanadium electric steel, forged, Ident. No. 600–640 oil-hardened Technical data: . Inlaid tips, spring steel wire, drawn . Surface: Grey atramentised . Material of the grip handle: Polyvinyl chloride

Ident. No. 650–690

Type A 0 A 1 A 2 A 3 A 4 A 01 A 11 A 21 Length (mm) 140 140 180 210 320 125 125 170 Suitable for min./max. Ø 3-10 mm 10-25 mm 19-60 mm 40-100 mm 85-140 mm 3-10 mm 10-25 mm 19-60 mm Head design Straight Straight Straight Straight Straight Angled 90° Angled 90° Angled 90° Ident. No. 600 610 620 630 640 650 660 670 53091... ● ● ● ● ● ● ● ● Type A 31 A 41 Length (mm) 200 300 Suitable for min./max. Ø 40-100 mm 85-140 mm Head design Angled 90° Angled 90° Ident. No. 680 690 53091... ● ● Prod. Gr. 535

Precision circlip pliers sets For internal and external circlips

Application: Advantage: Ident. No. 700, 710: For mounting and removing . Ident. No. 700, 710: inner and outer retaining rings. . Safe working processes with inlaid tips Ident. No. 705: for mounting and removing inner . For heavy-duty use, even in continuous opera- and outer circlips. tion, up to 10x longer service life compared to turned tips Execution: . Ident. No. 705: . Ident. No. 700, 710: . inlaid tips for safe working . Chrome-vanadium electric steel, forged, . for heavy-duty use, even in continuous operation, oil-hardened up to 10x longer service life compared to turned Ident. No. 700 . Inlaid tips, spring steel wire, drawn tips . Grey atramentised pliers . Ident. No. 705: Delivery: . chromium-vanadium electric steel, forged, Ident. No. 700: in roll-up pouch with 1x: J 1, J 2, A oil-hardened 1, A 2 . inlaid tips, spring steel wire, drawn Ident. No. 705: in roll-up pouch with 1x: J 2, J 21, A . grey atramentised pliers 2, A 21 Ident. No. 710: In plastic case with foam inlay with 1x: J 1, J 2, J 11, J 21, A 1, A 2, A 11, A 21

Technical data: Ident. No. 710 . Material of the grip handle: Polyvinyl chloride

Number of pieces in assortment/set (PCS) 4 4 8 Pocket Container Roll package Plastic case Ident. No. 700 705 710 53091... ● ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH 1416Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1415_EN_2018_KERN[21855048]-s.indd 1416 12/17/2018 3:36:06 PM Hand tools \ Retaining ring pliers

Retaining ring pliers, angled 45° For internal circlips

Application: Advantage: For mounting and removing inner retaining rings in . Non-slip, robust tips drill holes. Technical data: Execution: . Material of the grip handle: Polyvinyl chloride . Chrome-vanadium steel, forged, oil-hardened . Black atramentised pliers . Polished head . Tips angled by 45°

Type J 02 J 12 J 22 J 32 J 42 Length (mm) 140 140 180 225 310 Suitable for min./max. Ø 8-13 mm 12-25 mm 19-60 mm 40-100 mm 85-140 mm Ident. No. 002 012 022 032 042 53091... ● ● ● ● ● Prod. Gr. 535

Circlip pliers 45° angled For external circlips

Application: Advantage: For mounting and removing outer retaining rings on . Non-slip, robust tips s h a s . Technical data: Execution: . Head design: Angled 45° . Chrome-vanadium steel, forged, oil-hardened . Surface: Black atramentised . Black atramentised pliers . Material of the grip handle: Polyvinyl chloride . Polished head . Tips angled by 45°

Type A 02 A 12 A 22 A 32 A 42 Length (mm) 130 130 185 210 310 Suitable for min./max. Ø 3-10 mm 10-25 mm 19-60 mm 40-100 mm 85-140 mm Ident. No. 102 112 122 132 142 53091... ● ● ● ● ● Prod. Gr. 535

Retaining ring pliers For circlips (sha s)

Application: Advantage: For mounting and removing outer retaining rings on sha s. . Non-slip, robust tips . With opening spring Execution: . Chrome-vanadium steel, forged, oil-hardened Technical data: . Black atramentised pliers . Length: 140 mm . Polished head . Material of the grip handle: Polyvinyl chloride . Straight tips

Ident. No. 300 Ident. No. 310 Ident. No. 320

Type G 0 G 1 G 2 Suitable for min./max. Ø 1.5-4 mm 4-7 mm 5-13 mm Ident. No. 300 310 320 53091... ● ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1417 Availability subject to country specific rules and regulations.

1417_EN_2018_KERN[21855051]-b.indd 1417 12/17/2018 3:36:04 PM Hand tools \ Retaining ring pliers

Assembly pliers for snap rings

Application: . Ident. No. 001: For mounting snap rings and retaining rings without . Flat, serrated gripping jaws grip holes. . For snap rings with minimum gap size of 3.6 mm . Ident. No. 002: Execution: . Bent jaws with centring . Chrome-vanadium electric steel, forged, . For standardised snap rings starting from 12 mm oil-hardened in diameter Ident. No. 001 . Grey atramentised pliers . minimum opening of rings 2.2 mm

Length (mm) 170 200 Head design Straight Angled 45° Polyvinyl Material of the grip handle Steel chloride Ident. No. 001 002 53092... ● ● Prod. Gr. 535 Ident. No. 002

Retaining ring pliers ( DIN 5256 ) For internal circlips

Application: . Powder-coated black For mounting and removing inner retaining rings in . With unlockable locking mechanism drill holes. Technical data: Execution: . Surface: Powder-coated . Rolled steel, high-strength . Material of the grip handle: Steel . Interchangeable tips made from special tool steel, oil-hardened Type J 5 J 6 J 51 J 61 Length (mm) 550 586 550 586 Suitable for min./max. Ø 122-300 mm 252-400 mm 122-300 mm 252-400 mm Head design Straight Straight Angled 90° Angled 90° Ident. No. 800 810 820 830 53091... ● ● ● ● Prod. Gr. 535 Accessories for 53091 800 53091 810 53091 820 Spare tip Ident. No. 900 910 920 53091... ● ● ● Accessories for 53091 830 Spare tip Ident. No. 930 53091... ●

Circlip pliers ( DIN 5254 ) For external circlips

Application: . Powder-coated black For mounting and removing outer retaining rings on . With unlockable locking mechanism s h a s . Technical data: Execution: . Surface: Powder-coated . Rolled steel, high-strength . Material of the grip handle: Steel . Interchangeable tips made from special tool steel, oil-hardened Type A 5 A 6 A 51 A 61 Length (mm) 550 586 550 586 Suitable for min./max. Ø 122-300 mm 252-400 mm 122-300 mm 252-400 mm Head design Straight Straight Angled 90° Angled 90° Ident. No. 840 850 860 870 53091... ● ● ● ● Prod. Gr. 535 Accessories for 53091 840 53091 850 53091 860 Spare tip Ident. No. 940 950 960 53091... ● ● ● Accessories for 53091 870 Spare tip Ident. No. 970 53091... ●

Source: Hahn+Kolb Werkzeuge GmbH 1418Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1417_EN_2018_KERN[21855051]-b.indd 1418 12/17/2018 3:36:05 PM Hand tools \ Retaining ring pliers

Retaining ring plier set

Application: Advantage: For mounting and removing inner and outer retaining . Safe and reliable working thanks to extremely rings. precise, conical relief-ground tips (phosphated) . Extremely heavy-duty metal core reaches far into Execution: the plier arms . Tips made from chrome-vanadium steel . Lightweight, ergonomic shape . Plastic pliers body . Tips welded onto solid steel core, secured against . Set comprising no. 53155 020-330 twisting Number of pieces in assortment/set (PCS) 8 Material of the grip handle Plastic Ident. No. 800 53155... ● Prod. Gr. 569 Pincers ( ISO 9243 )

Application: Technical data: For removing nails or for pinching wire. . Surface of the handle: Black atramentised Execution: . Special tool steel, oil-hardened . Polished head Length (mm) 160 180 200 250 Ident. No. 500 510 520 530 53302... ● ● ● ● Prod. Gr. 597 Pincers ( ISO 9243 )

Application: Advantage: For driving in and removing nails or for pinching wire. . With a striking area for driving in nails

Execution: Technical data: . Special tool steel, oil-hardened . Material of the grip handle: Polyvinyl chloride . Polished head

Length (mm) 180 200 Ident. No. 500 510 53304... ● ● Prod. Gr. 597 Concrete or monier nipper ( ISO 9242 )

Application: Advantage: For twisting and pinching wire or for pulling out nails. . Optimum cutting performance with favourable lever ratio Execution: . Special tool steel, oil-hardened Technical data: . Blackened pliers . Material of the grip handle: Polyvinyl chloride . Polished head . Permanently sharp, inductively hardened precision blades Length (mm) 220 250 280 Ident. No. 220 250 280 53299... ● ● ● Prod. Gr. 597 TopCut concrete pliers ( ISO 9242 ) End-cutting nippers

Application: . Inductively hardened blades for excellent wear For twisting and pinching wire or for pulling out nails. resistance

Execution: Advantage: . Special tool steel, drop-forged, oil-hardened . Opening angle is limited for one-handed closure . Black atramentised pliers . Less cutting force required thanks to optimum . Polished head blade geometry Length (mm) 224 250 280 Ident. No. 510 520 530 53300... ● ● ● Prod. Gr. 544

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1419 Availability subject to country specific rules and regulations.

1419_EN_2018_KERN[21855054]-r.indd 1419 12/17/2018 3:36:12 PM Hand tools \ Cutting pliers

Heavy-duty concrete nippers, nickel-plated ( ISO 9242 )

Application: Advantage: For twisting and pinching wire or for pulling out nails. . 25% less force required compared to standard long-handled pincers of the same size thanks to Execution: the high-ratio joint, which relieves strain . Special-grade tool steel, forged, oil-hardened . Also suitable for tying deep-set iron bars thanks to . Fully nickel-plated pliers the particularly narrow design . Blades additionally hardened . Strong damping of the cutting impact a er cutting binding wire relieves strain on tendons and muscles Length (mm) 250 300 Ident. No. 025 030 53300... ● ● Prod. Gr. 535

Heavy-duty end-cutting nippers ( ISO 5748 )

Application: Advantage: For cutting and pinching oﬀ hard and so piano wire. . Flat joint and precise blades for energy-saving application Execution: . Ident. No. 710–720: Safe, ergonomic and fatigue- . Special tool steel, oil-hardened free working thanks to two-component handles . Inductively hardened blades with hand guard . Ident. No. 510–520: . Black atramentised pliers Ident. No. 510–520 . Polished head . Ident. No. 710–720: Chrome-plated pliers

Ident. No. 710–720

Length (mm) 160 200 160 200 Max. medium wire Ø cutting capacity (mm) 2.2 2.5 2.2 2.5 Material of the grip handle Polyvinyl chloride Polyvinyl chloride 2-component plastic 2-component plastic Ident. No. 510 520 710 720 53281... ● ● ● ● Prod. Gr. 597

Heavy-duty end-cutting nippers ( ISO 5748 )

Application: Advantage: For cutting and pinching so and hard wire, and . High cutting capacity with less force required piano wire. thanks to optimum coordination of cutting angle and transmission ratio Execution: . Chrome-vanadium heavy-duty steel, forged, Technical data: oil-hardened . Material of the grip handle: Plastic . Blades also inductively hardened . Black atramentised pliers . Polished head Length (mm) 140 160 Max. medium wire Ø cutting capacity (mm) 4 4.5 Ident. No. 500 510 53063... ● ● Prod. Gr. 535

End-cutting nippers ( ISO 5748 )

Application: Advantage: For twisting and pinching wire. . The head shape enables optimised motion when clamping the braid when working with reinforced Execution: concrete . Special-grade tool steel, forged, oil-hardened . Blades also inductively hardened Technical data: . Black atramentised pliers . Max. medium wire diameter cutting capacity: 4 mm . Polished head . Material of the grip handle: Plastic

Length (mm) 160 180 Ident. No. 010 020 53063... ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH 1420Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1419_EN_2018_KERN[21855054]-r.indd 1420 12/17/2018 3:36:13 PM Hand tools \ Cutting pliers

Side cutters Swedish form

Execution: Advantage: . Swedish design . Ident. No. 700–730: Safe, ergonomic and fatigue- . Special tool steel, oil-hardened free working thanks to two-component handles . Inductively hardened blades

Ident. No. 400–530

Ident. No. 700–730

Length (mm) 130 145 165 180 130 145 165 180 Surface Bare Bare Bare Bare Chrome-plated Chrome-plated Chrome-plated Chrome-plated Polyvinyl Polyvinyl Polyvinyl Polyvinyl 2-component 2-component 2-component 2-component Material of the grip handle chloride chloride chloride chloride plastic plastic plastic plastic Ident. No. 400 510 520 530 700 710 720 730 53249... ● ● ● ● ● ● ● ● Prod. Gr. 597

VDE side cutters Swedish design

Execution: Advantage: . Swedish design . Safe, ergonomic and fatigue-free working thanks to . Tempered tool steel two-component handles . Inductively hardened blades . VDE type according to DIN EN 60900 Technical data: . Surface: Chrome-plated . VDE certiﬁ ed: Yes . Material of the grip handle: 2-component plastic

Length (mm) 130 145 165 180 Ident. No. 900 910 920 930 53250... ● ● ● ● Prod. Gr. 597

Side cutters ( ISO 5749 )

Execution: Advantage: . Vanadium electric steel, forged, oil-hardened . Ident. No. 105–330: Safe, ergonomic and fatigue-free working thanks to . Blades also inductively hardened two-component handles . Ident. No. 305–330: VDE type according to DIN EN 60900

Ident. No. 005–030 Ident. No. 205–230 Ident. No. 305–330

Length (mm) 110 125 140 160 180 125 140 160 Surface Bare Bare Bare Bare Bare Bare Bare Bare VDE certiﬁ ed No No No No No No No No Max. hard wire Ø cutting capacity (mm) 1.2 1.5 1.8 2 2.5 1.5 1.8 2 Max. medium wire Ø cutting capacity (mm) 2.0 2.3 2.5 2.8 3 2.3 2.5 2.8 Max. so wire Ø cutting capacity (mm) 3 3 4 4 4 3 4 4 Polyvinyl Polyvinyl Polyvinyl Polyvinyl Polyvinyl 2-component 2-component 2-component Material of the grip handle chloride chloride chloride chloride chloride plastic plastic plastic Ident. No. 002 005 010 020 030 105 110 120 53095... ● ● ● ● ● ● ● ●

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1421 Availability subject to country specific rules and regulations.

1421_EN_2018_KERN[21855057]-w.indd 1421 12/17/2018 3:36:13 PM Hand tools \ Cutting pliers

Length (mm) 180 125 140 160 180 125 140 160 Surface Bare Chrome-plated Chrome-plated Chrome-plated Chrome-plated Chrome-plated Chrome-plated Chrome-plated VDE certiﬁ ed No No No No No Yes Yes Yes Max. hard wire Ø cutting capacity (mm) 2.5 1.5 1.8 2 2.5 1.5 1.8 2 Max. medium wire Ø cutting capacity (mm) 3 2.3 2.5 2.8 3 2.3 2.5 2.8 Max. so wire Ø cutting capacity (mm) 4 3 4 4 4 3 4 4 2-component 2-component 2-component 2-component 2-component 2-component 2-component 2-component Material of the grip handle plastic plastic plastic plastic plastic plastic plastic plastic Ident. No. 130 205 210 220 230 305 310 320 53095... ● ● ● ● ● ● ● ● Length (mm) 180 Surface Chrome-plated VDE certiﬁ ed Yes Max. hard wire Ø cutting capacity (mm) 2.5 Max. medium wire Ø cutting capacity (mm) 3 Max. so wire Ø cutting capacity (mm) 4 2-component Material of the grip handle plastic Ident. No. 330 53095... ● Prod. Gr. 535

X-cut compact side cutters High leverage transmission

Execution: . Double-mounted articulated axis for heavy-duty, . Chrome-vanadium heavy-duty steel, forged, long-lasting use oil-hardened . High cutting capacity with 40% less force required . Precise cutting action even for ﬁ ne copper wires thanks to optimum coordination of cutting angle . Compact, weight-saving design and transmission ratio . Ident. No. 420: VDE type according to DIN EN . Large opening width for thick cables 60900 . Safe, ergonomic and fatigue-free working thanks to Ident. No. 410 two-component handles Advantage: . Box joint, optimum stability combined with low weight

Ident. No. 420

Length (mm) 160 160 160 Surface Bare Chrome-plated Chrome-plated VDE certiﬁ ed No No Yes Max. hard wire Ø cutting capacity (mm) 2.7 2.7 2.7 Max. so wire Ø cutting capacity (mm) 4.8 4.8 4.8 Material of the grip handle 2-component plastic 2-component plastic 2-component plastic Ident. No. 400 410 420 53095... ● ● ● Prod. Gr. 535

Side cutters

Technical data: . Surface: Bare . VDE certiﬁ ed: No . Material of the grip handle: Polyvinyl chloride

Length (mm) 140 160 Ident. No. 140 160 53251... ● ● Prod. Gr. 593

Source: Hahn+Kolb Werkzeuge GmbH 1422Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1421_EN_2018_KERN[21855057]-w.indd 1422 12/17/2018 3:36:14 PM Hand tools \ Cutting pliers

Heavy-duty side cutters With optimised power joint

Application: Advantage: for easy cutting of wires and cables. . safe, ergonomic and eﬀ ortless work thanks to 2-component handles Execution: . excellent cutting performance with low force . power joint with up to 20% power saving required thanks to optimal leverage . special tool steel, oil-hardened . for heavy-duty long-term use . inductively hardened blades . Ident. No. 016–020: with opening spring for Technical data: optimal handling (simple to disassemble) . Surface: Chrome-plated . Ident. No. 160–200: VDE type according to DIN . Material of the grip handle: 2-component plastic Ident. No. 018 EN 60900

Ident. No. 180 Length (mm) VDE certiﬁ ed Max. medium wire Ø cutting capacity (mm) 53256... Ident. No. 160 No 3.5 016 ● 180 No 3.8 018 ● 200 No 4.2 020 ● 160 Yes 3.5 160 ● 180 Yes 3.8 180 ● 200 Yes 4.2 200 ● Prod. Gr. 597

Heavy-duty side cutters

Execution: Technical data: . Special tool steel, oil-hardened . Surface: Bare . Inductively hardened blades . Material of the grip handle: Polyvinyl chloride Advantage: . Excellent cutting rate with low force required thanks to optimal lever transmission . For heavy-duty long-term use Length (mm) 160 180 200 Ident. No. 510 520 530 53254... ● ● ● Prod. Gr. 597

Heavy-duty side-cutters

Application: Advantage: For cutting wires and cables. . With forged articulated axis for extreme, long-lasting use . Optimum coordination of cutting angle, transmission ratio and ergonomic Execution: handle shape ensure an excellent cutting rate with little force needed . Chrome-vanadium heavy-duty steel, forged, oil-hardened . 20% less force required compared to standard side-cutters . Precision blades also inductively hardened for all types of wires . Ident. No. 600–730: Safe, ergonomic and fatigue-free working thanks to . Ident. No. 700–730: VDE type according to DIN EN 60900 two-component handles

Ident. No. 500–530 Ident. No. 600–630 Ident. No. 700–730 Ident. No. 820

Length (mm) 160 180 200 250 160 180 200 250 Surface Bare Bare Bare Bare Bare Bare Bare Bare VDE certiﬁ ed No No No No No No No No Max. medium wire Ø cutting capacity (mm) 3.4 3.8 4.2 4.6 3.4 3.8 4.2 4.6 Polyvinyl Polyvinyl Polyvinyl Polyvinyl 2-component 2-component 2-component 2-component Material of the grip handle chloride chloride chloride chloride plastic plastic plastic plastic Ident. No. 500 510 520 530 600 610 620 630 53095... ● ● ● ● ● ● ● ●

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1423 Availability subject to country specific rules and regulations.

1423_EN_2018_KERN[21855060]-m.indd 1423 12/17/2018 3:36:17 PM Hand tools \ Cutting pliers

Length (mm) 160 180 200 250 201 Surface Chrome-plated Chrome-plated Chrome-plated Chrome-plated Bare VDE certiﬁ ed Yes Yes Yes Yes No Max. medium wire Ø cutting capacity (mm) 3.4 3.8 4.2 4.6 4.2 2-component 2-component 2-component 2-component Polyvinyl Material of the grip handle plastic plastic plastic plastic chloride Ident. No. 700 710 720 730 820 53095... ● ● ● ● ● Prod. Gr. 535

Twin-Force heavy-duty side cutters high lever transmission

Application: Advantage: For simple cutting of all types of wires with little . Safe, ergonomic and fatigue-free working thanks to force required. two-component handles . Extremely simple cutting of all types of wires with Execution: little force required . Chrome-vanadium heavy-duty steel, forged, . Minimum cutting impact, strain relief on hand, oil-hardened muscles and tendons . Black atramentised pliers . Optimum ratio thanks to double-jointed design Length (mm) 180 Surface Bare Material of the grip handle 2-component plastic Ident. No. 900 53095... ● Prod. Gr. 535

Lever side cutters and lever end cutting nippers

Application: . With opening spring For easy cutting of hard wires. Advantage: Execution: . Up to 40% less force required due to lever ratio . Special steel head, polished . One-handed operation with integrated spring and lock

Ident. No. 005

Ident. No. 010

Length (mm) 160 160 Surface Bare - Max. medium wire Ø cutting capacity (mm) 2.2 2.4 Material of the grip handle Polyvinyl chloride Polyvinyl chloride Ident. No. 005 010 53096... ● ● Prod. Gr. 597

Plastic side cutters ( ISO 5743 )

Application: . Surface-ground cutting surfaces without chamfer For smooth cutting oﬀ of sprues on plastic components or so materials such . With opening spring as lead. Technical data: Execution: . Surface: Bare . Vanadium electric steel, forged, oil-hardened . Material of the grip handle: Polyvinyl chloride

Ident. No. 010–020 Ident. No. 120 Ident. No. 220

Length (mm) 140 160 180 160 160 Head design Straight Straight Straight Angled 45° Angled 85° Ident. No. 010 020 030 120 220 53097... ● ● ● ● ●

Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH 1424Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1423_EN_2018_KERN[21855060]-m.indd 1424 12/17/2018 3:36:22 PM Hand tools \ Cutting pliers

Heavy-duty cutters

Application: Technical data: for eﬀ ortless cutting of wires . Length: 210 mm . Max. piano wire diameter cutting capacity: 3.6 mm Execution: . Max. so wire diameter cutting capacity: 5.2 mm . optimised arm position for easy gripping . Surface: Lacquered . integrated heavy-duty rivets for maximum load . Head design: Angled 20° capacity . patented joint geometry ensures extremely easy Ident. No. 300 and power-saving cutting of even hard wires . with opening spring and lock

Polyvinyl 2-component Material of the grip handle chloride plastic Ident. No. 300 310 53096... ● ● Prod. Gr. 597

CoBolt compact bolt cutters

Application: . Ident. No. 020, 050: Safe, ergonomic and fatigue-free working thanks to Ident. No. 010–050: For cutting so and hard wire, bolts, nails and rivets. two-component handles Ident. No. 060: for cutting so and hard wire, bolts, nails and rivets. . Ident. No. 030: With recess close to the joint for cutting thicker wires . Ident. No. 040: One-sided lug and lateral cut for ﬂ ush cuts Execution: . Ident. No. 050: With opening spring and lock . Ident. No. 010–050: . Ident. No. 060: . Chrome-vanadium heavy-duty steel, forged, oil-hardened . cutting forces are 20 times greater than the manual force applied; 60% less . Blades also inductively hardened force is required compared to heavy-duty side cutters of the same length . Ident. No. 060: . recess close to the joint for cutting thicker wires . chromium-vanadium heavy-duty steel, forged, oil-hardened . blades also inductively hardened Technical data: . Advantage: Max. piano wire diameter cutting capacity: 3.6 mm . Max. so wire diameter cutting capacity: 6 mm . Ident. No. 010–050: The cutting forces are 20 times greater than the manual . Surface: Black atramentised force applied; 60% less force is required compared to heavy-duty side cutters of the same length

Ident. No. 040 Ident. No. 010 Ident. No. 020 Ident. No. 050

Length (mm) 205 215 205 205 205 250 Material of the grip handle Polyvinyl chloride 2-component Polyvinyl chloride Polyvinyl chloride 2-component plastic plastic Polyvinyl chloride Head design Straight Straight Recess close to Recess close to joint Angled 20° Locking mechanism joint Ident. No. 010 020 030 040 050 060 53098... ● ● ● ● ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1425 Availability subject to country specific rules and regulations.

1423_EN_2018_KERN[21855060]-m.indd 1425 12/17/2018 3:36:32 PM Hand tools \ Cutting pliers

Bolt end cutters

Application: . Extremely ﬂ at top and joint area ensure excellent Ident. No. 010–040: For cutting bolts, tie rods and accessibility steel wire. . Pivot arm at ergonomic angle for fatigue-free Ident. No. 050: For cutting structural steel mats. working . Robust and excellent non-slip two-component Ident. No. 020 Execution: handles . Blade: Chrome-vanadium heavy-duty steel, forged, . Precise adjustments (12x) and re-adjustments oil-hardened using eccentric screws . Joint: Special tool steel, forged . Pivot arms: Steel pipe, powder-coated Technical data: . Grey-atramentised top . Material of the grip handle: 2-component plastic Ident. No. 050 Advantage: . Forged stop with comfortable damper Length (mm) 460 610 760 910 950 Max. piano wire Ø cutting capacity (mm) 4 7 8 9 6 Max. so wire Ø cutting capacity (mm) 8 9 11 13 9 Ident. No. 010 020 030 040 050 53273... ● ● ● ● ● Prod. Gr. 535

Bolt end cutters

Application: . Inductively hardened blades For cutting bolts, tie rods and steel wire. . Handle ends encased in rubber

Execution: Technical data: . Forged cutting blade . Surface: Bare . Steel pipe arms . Material of the grip handle: Plastic

Length (mm) 460 610 760 910 Max. piano wire Ø cutting capacity (mm) 6 8 9 10 Max. so wire Ø cutting capacity (mm) 8 9 11 13 Ident. No. 200 210 220 230 53324... ● ● ● ● Prod. Gr. 5JE Cable shears

Application: . Not suitable for steel wire and hard-drawn copper For cutting single and multi-conductor copper and wire aluminium cables. Advantage: Execution: . Safe, ergonomic and fatigue-free working thanks to . Hardened, precision-ground blades two-component handles . Polished head . Narrow, riveted joint Technical data: . Material of the grip handle: 2-component plastic

Length (mm) 160 210 Max. medium wire Ø cutting capacity (mm) 10 12 Ident. No. 310 320 53093... ● ● Prod. Gr. 597 VDE cable cutters

Application: Advantage: For cutting single and multi-conductor copper and . Safe, ergonomic and fatigue-free working thanks to aluminium cables. two-component handles . One-handed operation with integrated spring and Execution: lock . Chrome-plated pliers . Angled head relieves strain on the wrist and . Fine blade for smooth and easy cuts provides an optimum view . Ground, bolted precision joint, adjustable . Not suitable for steel wire and hard-drawn copper Technical data: wire . VDE certiﬁ ed: Yes . VDE type according to DIN EN 60900 . Material of the grip handle: 2-component plastic

Length (mm) 180 220 Max. medium wire Ø cutting capacity (mm) 18 25 Ident. No. 410 420 53093... ● ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH 1426Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1426_EN_2018_KERN[21855064]-t.indd 1426 12/17/2018 3:36:13 PM Hand tools \ Cutting pliers

Cable cutters

Execution: . Handles coated in plastic, VDE version to DIN . Hardened, precision-ground blades EN 60900 . Polished head . For single-strand copper conductors up to 16 mm2, multi-strand up to 50 mm2 and ﬁ ne-strand . Not suitable for steel wire and hard-drawn copper 2 up to 70 mm wire . For multi-strand aluminium conductors up to 70 . Adjustable screw joint 2 mm Ident. No. 005 . Ident. No. 005: . Surgical steel, rustproof, oil-hardened and Advantage: annealed . Cable is not pinched, minimal warping . For cutting cables up to 10 mm/24 mm2 . Pinch guard prevents crushing injuries . Ident. No. 010: . Ident. No. 005: With opening spring and catch . Surgical steel, rustproof, hardened and annealed . Ident. No. 010: Simple to make cuts using one hand thanks to high ratio

Ident. No. 010 Length (mm) 165 230 Max. medium wire Ø cutting capacity (mm) 10 25 VDE certiﬁ ed - Yes Material of the grip handle Plastic Plastic Ident. No. 005 010 53099... ● ● Prod. Gr. 535

Cable cutters with adjustable screw joint, self-locking

Application: Advantage: For cutting, stripping and removing insulation on copper and aluminium cables. . Cuts smoothly and cleanly without crushing . Easy one-handed cutting Execution: . Pinch guard prevents crushing injuries . Special-grade tool steel, forged, oil-hardened . Ident. No. 012: Opening spring positioned in the joint, protected and captive . Hardened, precision-ground blades . Ident. No. 015–020: Safe, ergonomic and fatigue-free working thanks to . Not suitable for steel wire and hard-drawn copper wire two-component handles . Adjustable screw joint, self-locking . Ident. No. 020: VDE type according to DIN EN 60900 Technical data: . Length: 165 mm . Max. medium wire diameter cutting capacity: 15 mm

Ident. No. 010 Ident. No. 012 Ident. No. 015 Ident. No. 020

VDE certiﬁ ed No No No Yes Surface Bare Burnished Burnished Chrome-plated Material of the grip handle Polyvinyl chloride Polyvinyl chloride 2-component plastic 2-component plastic Ident. No. 010 012 015 020 53100... ● ● ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1427 Availability subject to country specific rules and regulations.

1426_EN_2018_KERN[21855064]-t.indd 1427 12/17/2018 3:36:13 PM Hand tools \ Cutting pliers

Cable cutters Twin blades

Application: . Pinch guard prevents crushing injuries For cutting single and multi-conductor copper and aluminium cables. . Low force required thanks to favourable transmission ratios and optimised blade geometry Execution: . By splitting the cutting process into pre-cut (insulating sheath with front blade . Special-grade tool steel, forged, oil-hardened area) and post-cut (conductor in rear blade area), cables up to 20 mm in diam- . Hardened, precision-ground blades eter can be cut with one hand . Not suitable for steel wire and hard-drawn copper wire . Ident. No. 105–110: Safe, ergonomic and fatigue-free working thanks to . Adjustable screw joint, self-locking two-component handles . Ident. No. 110: VDE type according to DIN EN 60900 Technical data: Advantage: . Length: 200 mm . Cuts smoothly and cleanly without crushing . Max. medium wire diameter cutting capacity: 20 mm

Ident. No. 100 Ident. No. 105 Ident. No. 110

VDE certiﬁ ed No No Yes Surface Bare Bare Chrome-plated Material of the grip handle Polyvinyl chloride 2-component plastic 2-component plastic Ident. No. 100 105 110 53100... ● ● ● Prod. Gr. 535 Cable shears Short model

Application: . Pivot arms: Aluminium pipe For cutting single and multi-conductor copper and . Hardened, precision-ground blades aluminium cables. . Blade top: Special grade chrome-vanadium electric steel, forged, oil-hardened Execution: . Pivot arms: Aluminium pipe . Not suitable for steel wire and piano wire Length (mm) 500 Max. medium wire Ø cutting capacity (mm) 27 Material of the grip handle 2-component plastic Ident. No. 005 53101... ● Prod. Gr. 535 Cable cutters

Application: Advantage: For cutting copper and aluminium cables. . Cuts smoothly and cleanly without crushing . Favourable transmission ratios by means of knee Execution: lever . Blade top: Special grade chrome-vanadium electric . Pinch guard prevents crushing injuries steel, forged, oil-hardened . Bolted cutter head, replaceable . Pivot arms: Steel pipe, dip-insulated . Hardened, precision-ground blades . Not suitable for steel wire and piano wire . Adjustable screw joint Length (mm) 600 Max. medium wire Ø cutting capacity (mm) 27 Material of the grip handle Polyvinyl chloride Ident. No. 010 53101... ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH 1428Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1428_EN_2018_KERN[21855067]-d.indd 1428 12/17/2018 3:36:12 PM Hand tools \ Cutting pliers

Cable cutters

Application: . With pinching guard to prevent crushing injuries For cutting copper and aluminium cables. . Ident. No. 010–120: . One-handed operation using ratchet principle, low force required thanks to Execution: optimum transmission ratios . Special-grade tool steel, oil-hardened . 2-speed gear ring drive for simple cutting . Hardened, precision-ground blades . Ident. No. 130–140: . Not suitable for steel wire and piano wire . One-handed and two-handed operation using ratchet principle, low force . Ident. No. 110–120, 140: VDE type according to DIN EN 60900 required thanks to optimum transmission ratios . 3-speed gear ring drive for simple cutting Advantage: . Cut smoothly and cleanly without crushing Technical data: . Simple to use thanks to low weight and compact design; even possible to use in . Material of the grip handle: 2-component plastic conﬁ ned spaces

Ident. No. 120 Ident. No. 130 Ident. No. 140 Ident. No. 020 Length (mm) 250 280 250 280 320 320 Max. medium wire Ø cutting capacity (mm) 32 52 32 52 60 60 VDE certiﬁ ed No No Yes Yes No Yes Ident. No. 010 020 110 120 130 140 53102... ● ● ● ● ● ● Prod. Gr. 535

Cable and transmission line cutter With ratchet mechanism

Application: . 2-speed gear ring drive for simple cutting for ACSR cable with steel core . pinching guard to prevent crushing injuries

Execution: Technical data: . special-grade tool steel, oil-hardened . Length: 320 mm . hardened, precision-ground blades . Max. medium wire diameter cutting capacity: 52 . cuts smoothly and cleanly without crushing mm . . ratchet principle for one-handed operation, low VDE certiﬁ ed: No . Material of the grip handle: 2-component plastic force required thanks to optimum transmission ratios 200 53102... Ident. No. ● Prod. Gr. 535

Cable cutters Ratchet mechanism

Application: . Low hand forces owing to ratchet function For cutting single- and multi-core copper and . Unlocking option in each cutting position aluminium cables . Cuts single-wire conductors up to 45 mm, multi- wire conductors up to 400 mm2 Execution: . Single-handed operation, simple handling Model KT 45 Length (mm) 290 Material of the grip handle 1-component plastic Ident. No. 100 53299... ● Prod. Gr. 543

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1429 Availability subject to country specific rules and regulations.

1428_EN_2018_KERN[21855067]-d.indd 1429 12/17/2018 3:36:14 PM Hand tools \ Cutting pliers

Wire rope cutters

Application: Advantage: For cutting ﬁ nely stranded cords, hard wires and . Ident. No. 019: cables. . Angled head for improved view of the working area Execution: . One-handed operation with integrated spring . Extra-strong shearing blade and lock . Ground, bolted precision joint, adjustable . Safe, ergonomic and fatigue-free working thanks Ident. No. 019 . Ident. No. 050: Steel pipe arms with ergonomic to two-component handles plastic handles Technical data: . Surface: Bare

Ident. No. 050 Length (mm) 190 500 Max. medium wire Ø cutting capacity (mm) 7 12 Material of the grip handle 2-component plastic Polyvinyl chloride Ident. No. 019 050 53300... ● ● Prod. Gr. 597

Wire rope cutters Forged

Application: . Bolted joint for precise guiding of the cutter, For cutting all wire ropes, as well as piano wire. adjustable

Execution: Advantage: . Chrome-vanadium heavy-duty steel, forged, . two pressing sections for end sleeves on Bowden oil-hardened casings and end caps for wire cables Ident. No. 290 . Inductively hardened blades for clean cuts without . Comfortable working thanks to handy, slim design splaying and internal opening spring . High ratio for energy-saving working processes

Ident. No. 300

Length (mm) 190 190 Max. medium wire Ø cutting capacity (mm) 2.5 2.5 Surface Bare Bare Material of the grip handle Polyvinyl chloride 2-component plastic Ident. No. 290 300 53102... ● ● Prod. Gr. 535

Wire rope and cable cutters

Application: Advantage: For cutting wire cables, steel cables, wires of all . Even cutting without pinching or prior tying of types and wire gauze. cables thanks to triangular cutting . One-hand operation Execution: . Easy cutting thanks to optimum lever action . Knife and pin made from hardened high-quality steel, pressed sheet steel handles . Case-hardened blades Model C 7 Length (mm) 190 Max. medium wire Ø cutting capacity (mm) 5 Surface Bare Material of the grip handle Polyvinyl chloride Ident. No. 010 53340... ● Prod. Gr. 546

Source: Hahn+Kolb Werkzeuge GmbH 1430Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1430_EN_2018_KERN[21855070]-l.indd 1430 12/17/2018 3:36:13 PM Hand tools \ Cutting pliers

Wire rope and cable shears

Application: Advantage: Ident. No. 009–012: For cutting wire cables, steel . Even cutting without pinching or prior tying of cables, wires of all types and wire gauze. cables thanks to triangular cutting Ident. No. 016: For cutting wire cables, iron and . Easy cutting thanks to optimum lever action steel wires. Ident. No. 020: For cutting copper or aluminium Technical data: electrical cables with steel core. . Material of the grip handle: Plastic Ident. No. 012 Execution: . Hardened high-quality steel blades and connection parts, forged aluminium handles with lifelong guarantee . Case-hardened blades Model C 9 C 12 C 16 C 16 E Length (mm) 325 500 630 630 Max. medium wire Ø cutting capacity (mm) 7 8 14 20 Surface Bare Bare Bare Chrome-plated Ident. No. 009 012 016 020 53342... ● ● ● ● Prod. Gr. 546 Mitre snips For synthetic and rubber proﬁ les

Application: . Blade: Standard trapezoid blade, interchangeable For cutting plastic, rubber, so wood proﬁ les and . With opening spring and catch ﬂ at-band cables with no pinching. Advantage: Execution: . Interchangeable cutting support with angle stop for . Special tool steel, rolled, oil-hardened 45° cuts and markings for 60°, 75° and 90° cuts

Length (mm) 215 Surface Chrome-plated Material of the grip handle Polyvinyl chloride Ident. No. 010 53138... ● Prod. Gr. 535

Precision electronic side cutters ESD

Execution: . inserted double leaf springs and wear-resistance . glossy polished steel surface: proven and reliable guarantee uniform action fi nish. . box joint design for optimal maintenance-free . no risk to circuitry or components due to chrome guidance of jaws - fl a k i n g o ff . silky-smooth action, long service life, blade overlap . ESD-compatible 2-component handles with wide prevented. and non-slip contact surface Ident. No. 010 . inductively hardened blades facilitate easy and Technical data: sharp cutting with maximum service life . Surface: Bare . Material of the grip handle: 2-component plastic

Ident. No. 030

Length (mm) 120 125 125 125 140 125 125 Max. so wire Ø cutting capacity 1.5 1.5 1.5 1.5 2.0 1.5 1.5 Head design Pointed head | Oval | With grind Pointed head | Pointed head | Pointed head | With small grind Oval | With grind and wire clamp Mini bevel Oval | With grind With grind No grind Ident. No. 010 020 030 040 050 060 070 53028... ● ● ● ● ● ● ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1431 Availability subject to country specific rules and regulations.

1430_EN_2018_KERN[21855070]-l.indd 1431 12/17/2018 3:36:14 PM Hand tools \ Electronics cutters

ESD precision electronics angled and pointed cutters

Execution: . Box joint design for optimal maintenance-free . Glossy polished steel surface: proven and reliable guidance of jaws – silky-smooth action and long fi nish. service life, overlapping of blades avoided. . no risk to circuitry or components due to fl aking . Ident. No. 080: angle cutting pliers ideal for hori- off of chrome zontal and vertical application . ESD-compatible 2-component handles with wide . Ident. No. 090: tail angle cutting pliers with and non-slip contact surface slender jaws Ident. No. 080 . inductively hardened blades facilitate easy and sharp cutting with maximum service life Technical data: . Surface: Bare . double leaf springs inserted and wear-resistant . Material of the grip handle: 2-component plastic guarantee uniform action

Ident. No. 090

Length (mm) 120 130 Max. so wire Ø cutting capacity 1.2 0.8 Head design Straight | With small grind Pointed head | With small grind Ident. No. 080 090 53028... ● ● Prod. Gr. 597

ESD precision electronics long-nose, ﬂ at and round-nose cutters

Execution: . Ident. No. 110: pointed pliers with curved, short and smooth jaws . glossy polished steel surface: proven and reliable fi nish. . Ident. No. 120: fl at nose pliers with short and smooth jaws . no risk to circuitry or components due to chrome fl aking off . Ident. No. 130: round-nose pliers with short and smooth jaws . ESD-compatible 2-component handles with wide and non-slip contact surface . Ident. No. 140: pointed pliers with long, straight jaws with cut . box joint design for optimal maintenance-free guidance of jaws - . silky-smooth action and long service life. Technical data: . Surface: Bare . inserted double leaf springs and wear-resistance guarantee uniform action . Material of the grip handle: 2-component plastic . Ident. No. 100: pointed pliers with straight, short and smooth jaws

Ident. No. 140 Ident. No. 100 Ident. No. 110 Ident. No. 120–130

Source: Hahn+Kolb Werkzeuge GmbH 1432Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1432_EN_2018_KERN[21855073]-n.indd 1432 12/17/2018 3:36:14 PM Hand tools \ Electronics cutters

Electronics gripping pliers

Application: Advantage: Ident. No. 010, 030–040: For highly precise assembly tasks in electronics and . Anti-glare, phosphatised surface enables safe working precision mechanics ﬁ elds. . With low-friction double-opening spring and two-component handles for Ident. No. 020: For bending grommets with diﬀ erent radii for wire-shaped fatigue-free, ergonomic working materials. Technical data: Execution: . Length: 125 mm . C-45 steel, 44-48 HRC arm hardness . Surface: Phosphated . Material of the grip handle: 2-component plastic

Ident. No. 010 Ident. No. 030 Ident. No. 040

Ident. No. 020

Head design Flat Round Pointed head Pointed head | Straight Ident. No. 010 020 030 040 53027... ● ● ● ● Prod. Gr. 597

Electronics cutters

Execution: . With low-friction double-opening spring and two-component handles for . C-60 steel, blade hardness from 63-65 HRC fatigue-free, ergonomic working . Inductively hardened blades . Largest cuttable diameter (copper): 0.2-2 mm Technical data: . Length: 112 mm . Ident. No. 140: taper tap with straight blade, without bevel . Surface: Phosphated . Material of the grip handle: 2-component plastic Advantage: . Anti-glare, phosphatised surface enables safe working

Ident. No. 100 Ident. No. 110 Ident. No. 120 Ident. No. 130

Max. so wire Ø cutting capacity (mm) 1.3 1.3 1.3 1.3 1.5 Head design With grind With grind and wire clamp No grind Wire clamp No grind Ident. No. 100 110 120 130 140 53027... ● ● ● ● ● Prod. Gr. 597 Electronics pliers and cutter set In textile bag

Application: Advantage: For cutting, holding and gripping. . Anti-glare, phosphatised surface enables safe working Execution: . With low-friction double-opening spring and . C-45/C-60 steel two-component handles for fatigue-free, ergo- . Consisting of: Flat-nose pliers, round-nose pliers, nomic working pointed pliers (straight and bent), side-cutters with and without bevel Delivery: Set in zipped case Number of pieces in assortment/set 6 Surface Phosphated Material Tool steel Ident. No. 300 53027... ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1433 Availability subject to country specific rules and regulations.

1432_EN_2018_KERN[21855073]-n.indd 1433 12/17/2018 3:36:19 PM Hand tools \ Electronics cutters

Precision electronics gripping pliers ( ISO 9655 )

Application: Advantage: Ident. No. 010–020, 040–050: For highly precise assembly tasks in electronics . Weighs 20% less than conventional electronics pliers and enables safe, ergo- and precision mechanics fi elds. nomic and fatigue-free working thanks to 2-C handles Ident. No. 030, 060: For bending grommets with diff erent radii for wire-shaped . Ident. No. 040–060: Dissipative handles materials. Technical data: Execution: . Surface: Bare . Chrome-vanadium ball-bearing steel, forged . Material of the grip handle: 2-component plastic . Burnished pliers (anti-glare), polished head . Smooth-ground gripping surfaces, edges fi nely rounded . Smooth double spring for gentle, even opening action . Bolted joint and precision-made joint surfaces

Ident. No. 040 Ident. No. 050 Ident. No. 060 Ident. No. 010 Ident. No. 020 Ident. No. 030

Length (mm) 130 130 130 135 135 135 Head design Flat Straight Round Flat Flat Round | | Pointed Pointed Ident. No. 010 020 030 040 050 060 53120... ● ● ● ● ● ● Prod. Gr. 535 Precision electronics side cutters ( ISO 9654 )

Execution: Advantage: . Chrome-vanadium ball-bearing steel, forged . Weighs 20% less than conventional electronics pliers and enables safe, ergo- . Burnished pliers (anti-glare), polished head nomic and fatigue-free working thanks to 2-C handles . Smooth double spring for gentle, even opening action . Ident. No. 170–220: Dissipative handles . Bolted joint and precision-made joint surfaces Technical data: . Ident. No. 110, 130, 150, 170–180: Extremely precisely ground, sharp blades . Surface: Bare . Ident. No. 120, 140, 160: Very precisely ground, sharp blades for ﬂ ush cutting . Material of the grip handle: 2-component plastic . Ident. No. 210–220: Wire clamp prevents uncontrolled springing out of wire sections

Ident. No. 110–120 Ident. No. 130–140 Ident. No. 150–160 Ident. No. 170 Ident. No. 180 Ident. No. 190

Ident. No. 210

Length (mm) 125 125 125 125 120 120 125 125 Max. so wire Ø cutting capacity (mm) 1.5 1.2 1.3 1 1 0.8 1.5 1.5 Head design With bevel | Without bevel With bevel | Without bevel With bevel | Without bevel With small With small Round | Round Pointed | Pointed Mini head | Mini head bevel | Round bevel | Pointed Ident. No. 110 120 130 140 150 160 170 180 53120... ● ● ● ● ● ● ● ● Length (mm) 120 125 125 125 Max. so wire Ø cutting capacity (mm) 1.7 1.5 1.3 1.3 With small Without bevel Head design Without bevel Without bevel bevel | Pointed | Pointed | Mini head | Pointed head head with wire head with wire clamp clamp Ident. No. 190 200 210 220 53120... ● ● ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH 1434Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1434_EN_2018_KERN[21855076]-n.indd 1434 12/17/2018 3:36:14 PM Hand tools \ Electronics cutters

Electronics pliers set For working on electronic components

Execution: Advantage: . Pliers length: 115 mm . Ident. No. 020: ESD design, discharges electricity . Ident. No. 010: . Elasticated rubber strap pliers holder, with zip Delivery: In durable plastic case . Comes with: 1 pair of electronics side cutters Ident. No. 010: with and without chamfer, 1 pair of electronics Ident. No. 020: In practical storage box made from gripping pliers with ﬂ at, ﬂ at/round and round impact-resistant plastic with foam inlay Ident. No. 010 jaws, 1 pair of electronics end-cutting nippers and precision tweezers Technical data: . Ident. No. 020: Comes with: 1 pair of electronics . Surface: Chrome-plated gripping pliers, 1 pair of electronics side-cutters, . Material: Tool steel WERA electronics screwdriver PH 0/PH 1/0.40 x 2.5/0.50 x 3.0/0.60 x 3.5/0.80 x 4.0

Ident. No. 020 Number of pieces in assortment/set (PCS) 7 8 Ident. No. 010 020 53103... ● ● Prod. Gr. 535

Electronics gripping pliers ( ISO 9655 )

Application: Advantage: For gripping, holding and bending during precision assembly work. . Mirror-fi nished surface with fi ne oil fi lm to protect against rust, no interference in the circuit by fl aking chrome parts Execution: . Ident. No. 070–080: ESD version, discharges electricity . Special tool steel, forged, oil-hardened . Smooth, ground gripping surfaces Technical data: . Carefully deburred edges . Material of the grip handle: 2-component plastic . Pushed-through precision joint . Low-friction double spring for smooth, even opening action

Ident. No. 050 Ident. No. 060 Ident. No. 010 Ident. No. 020 Ident. No. 030 Ident. No. 040

Ident. No. 070 Ident. No. 080

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1435 Availability subject to country specific rules and regulations.

1434_EN_2018_KERN[21855076]-n.indd 1435 12/17/2018 3:36:15 PM Hand tools \ Electronics cutters

Electronics end-cutting nippers

Application: Advantage: For precision cutting tasks in electronics and precision mechanics fi elds. . Mirror-fi nished surface with fi ne oil fi lm to protect against rust, no interference in the circuit by fl aking chrome parts Execution: . Safe, ergonomic and fatigue-free working thanks to two-component handles . Special-grade tool steel, forged, oil-hardened . Ident. No. 060: ESD design, discharges electricity . Blades also inductively hardened . Pushed-through precision joint Technical data: . Low-friction double spring for smooth, even opening action . Surface: Bare . Material of the grip handle: 2-component plastic

Ident. No. 020 Ident. No. 030–040 Ident. No. 050 Ident. No. 060

Length (mm) 115 115 120 115 120 115 Max. so wire Ø cutting capacity (mm) 2 2 1.5 1.3 0.6 2 Head design With bevel With small bevel With small bevel Without bevel With small bevel Mini bevel Ident. No. 010 020 030 040 050 060 53105... ● ● ● ● ● ● Prod. Gr. 535

Electronics side cutters

Application: Advantage: Ident. No. 010–050, 060–100: For delicate cutting tasks in electronics and . Ident. No. 010–050, 060–100: precision mechanics fi elds. . Mirror-fi nished surface with fi ne oil fi lm to protect against rust, no interfer- Ident. No. 055: For delicate cutting tasks in electronics and precision ence in the circuit by fl aking chrome parts engineering. . Safe, ergonomic and fatigue-free working thanks to two-component handles . Ident. No. 055: Execution: . Mirror-fi nished surface with fi ne oil fi lm to protect against rust, no interfer- . Special-grade tool steel, forged, oil-hardened ence in the circuit from fl aking chrome parts . Blades also inductively hardened . Safe, ergonomic and eff ortless work thanks to 2-component handles . Low-friction double spring for smooth, even opening action . Ident. No. 070–100: ESD design, discharges electricity . Ident. No. 010–050, 060–100: Robust, box and clearance-free joint . Ident. No. 055: Robust, clearance-free box joint Technical data: . Surface: Bare . Material of the grip handle: 2-component plastic

Ident. No. 055 Ident. No. 010–030 Ident. No. 050, 060 Ident. No. 080 Ident. No. 090 Ident. No. 100

Length (mm) 115 115 115 115 115 130 115 115 Max. so wire Ø cutting capacity (mm) 1.6 1.6 1.3 1.3 1.3 1.6 0.8 1.6 With bevel and With bevel | Without bevel With small Without bevel Pointed head | Mini bevel | With small Head design wire clamp | Round Round | Round bevel | Pointed | Pointed Without bevel Pointed bevel | Round Ident. No. 010 020 030 040 050 055 060 070 53106... ● ● ● ● ● ● ● ● Length (mm) 115 115 115 Max. so wire Ø cutting capacity (mm) 1.6 1.3 1.3 Without bevel Mini bevel | Mini bevel | Head design | Round | Round Pointed Long Ident. No. 080 090 100 53106... ● ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH 1436Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1436_EN_2018_KERN[21855079]-r.indd 1436 12/17/2018 3:36:13 PM Hand tools \ Electronics cutters

Electronics Super-Knips

Application: Advantage: For precision cutting tasks in electronics and precision mechanics fi elds. . Safe, ergonomic and fatigue-free working thanks to two-component handles . Precisely shaped tips also cut close-fi tting wires from a diameter of 0.2 mm Execution: . Extremely smooth action for fatigue-free working . Ground, very sharp blades without chamfer for fl ush cutting . Ident. No. 020, 060, 080: With wire clamp — no uncontrolled displacement of . Joint with stainless steel rivet wire sections . With opening spring and opening limiter . Ident. No. 050: Also suitable for cutting fi bre glass cables . Ident. No. 010–030: INOX stainless steel . Ident. No. 070–090: ESD design, discharges electricity . Ident. No. 010–030, 090: Polished head . Ident. No. 010–060: Blades also inductively hardened Technical data: . Ident. No. 040–080: Special tool steel, burnished . Length: 125 mm . Ident. No. 090: INOX surgical stainless steel, air-hardened . Material of the grip handle: 2-component plastic

Ident. No. 010 Ident. No. 030 Ident. No. 040 Ident. No. 020 Ident. No. 050 Ident. No. 060

Ident. No. 070–090 Max. so wire Ø cutting capacity (mm) 1.6 1.6 1 1 1.6 1.6 1.6 1.6 Without bevel Without bevel Without bevel Without bevel Without bevel Without Without bevel | Without | Without Without bevel | Without bevel | With Head design | Without wire | Without wire | Wire clamp wire clamp | wire clamp | | Wire clamp wire clamp | wire clamp, clamp Angled 60° Pointed clamp Narrow burnished Surface Bare Bare Bare Burnished Burnished Burnished Burnished Burnished Ident. No. 010 020 030 040 050 060 070 080 53107... ● ● ● ● ● ● ● ● Max. so wire Ø cutting capacity (mm) 1.6 Without bevel Head design | Without wire clamp | Narrow Surface Bare Ident. No. 090 53107... ● Prod. Gr. 535

Electronics side cutters With opening spring, without blade bevel

Application: . Ident. No. 145–165: Ident. No. 125–135: For cutting so copper wires. . special tool steel, anti-glare Ident. No. 145–165: for cutting so copper wires. . hardened blades . smooth-running joint Execution: . Ident. No. 155–165: . Ident. No. 125–135: . particularly sharp cutting edges for diﬃ cult tasks . Special tool steel, anti-glare . head angle 21°, blade length 8 mm, head width 10 mm . Hardened blades . Smooth-running joint Technical data: . blade angle 21°, blade length 10 mm, head width 13.5 mm . Surface: Burnished . Ident. No. 145: blade angle 50° . Material of the grip handle: 2-component plastic

Ident. No. 135 Ident. No. 145 Ident. No. 125

Length (mm) 138 138 135 133 133 Max. so wire Ø cutting capacity (mm) 1 1.3 1.3 1.3 1 Head design Wire clamp Without wire clamp Without wire clamp Without wire clamp Wire clamp Ident. No. 125 135 145 155 165 53028... ● ● ● ● ● Prod. Gr. 543

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1437 Availability subject to country specific rules and regulations.

1436_EN_2018_KERN[21855079]-r.indd 1437 12/17/2018 3:36:14 PM Hand tools \ Electronics cutters

Electronic side cutters/oblique cutters

Application: . Overlaid precision joint with screw connection For use when working on wiring harnesses or circuit boards. . With opening spring

Execution: Technical data: . High-alloy ball bearing steel . Surface: Burnished . Ground blades and jaws . Material of the grip handle: Plastic . Blades also inductively hardened

Ident. No. 010–060 Ident. No. 110–160 Ident. No. 410

Application: Advantage: For use when working on wiring harnesses or circuit . ESD design, discharges electricity boards. . Safe, ergonomic and fatigue-free working thanks to two-component handles Execution: . High-alloy ball bearing steel Technical data: . Ground blades and jaws . Max. so wire diameter cutting capacity: 1.25 mm . Blades also inductively hardened . Surface: Burnished . Overlaid precision joint with screw connection . Material of the grip handle: 2-component plastic . With adjustable opening spring Length (mm) 135.5 138 Head design With small grind | Oval No grind | Oval Ident. No. 210 260 53033... ● ● Prod. Gr. 519 Tweezers

Execution: . Rust-proof, anti-magnetic, non-reﬂ ecting matt ﬁ nish Length (mm) 120 Pointed jaws Tweezer design | Smooth, ground gripping surfaces Ident. No. 010 53005... ● Prod. Gr. 535 Tweezers Special steel

Execution: Technical data: . Hardened tips . Surface: Nickel-plated . Material: Tool steel

Ident. No. 510 Ident. No. 520 Ident. No. 530 Ident. No. 540 Ident. No. 570

Length (mm) 110 120 120 130 130 Tweezer design Short tip Swiss pattern Pinpoint Strong tip Fine, long tip Ident. No. 510 520 530 540 570 53002... ● ● ● ● ● Prod. Gr. 596

Source: Hahn+Kolb Werkzeuge GmbH 1438Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1438_EN_2018_KERN[21855082]-q.indd 1438 12/17/2018 3:36:14 PM Hand tools \ Tweezers

Tweezers Special steel

Execution: Technical data: . With rounded tips and grooves in the gripper ends . Surface: Nickel-plated . Material: Tool steel

Length (mm) 120 140 160 180 Rounded tip, Rounded tip, Rounded tip, Tweezer design Rounded tip grooves on end grooves on end grooves on end of gripper of gripper of gripper Ident. No. 520 540 560 580 53008... ● ● ● ● Prod. Gr. 596 Tweezers Non-magnetic

Execution: . Rustproof Technical data: . Fine matt-polished, anti-glare . Surface: Bare Advantage: . Material: Tool steel . Non-magnetic

Ident. No. 500–530 Ident. No. 540 Ident. No. 550 Ident. No. 560 Ident. No. 570 Ident. No. 580 Length (mm) 120 140 130 120 120 120 120 120 Laterally Laterally Tweezer design Fine tip Fine tip Strong, fi ne tip straight, curved, su- Strong, fl at, Fine, straight Angled, fi ne, super-fi ne tip per-fi ne tip rounded tip tip extra-strong tip Ident. No. 500 520 530 540 550 560 570 580 53009... ● ● ● ● ● ● ● ● Prod. Gr. 596

Tweezers Special steel

Execution: Advantage: . Rustproof . Non-magnetic . Fine matt-polished, anti-glare Delivery: . Set comprising no. 53009 500-580 In plastic case Surface Bare Material Tool steel Number of pieces in assortment/set 8 Ident. No. 800 53009... ● Prod. Gr. 596

Tweezers Made of special steel, with guide pin

Execution: Advantage: . With guide pin . Ident. No. 530–560: Fine toothing . Ident. No. 580: Coated with red PVC

Ident. No. 530–540 Ident. No. 560 Ident. No. 510, 570 Ident. No. 580

Length (mm) 155 145 200 145 155 155 Angled, serrated, Tweezer design Angled, serrated tip Straight | Rounded Straight | Rounded Straight | Rounded Angled, serrated, pointed curved tip tip | Toothed tip | Toothed tip | Toothed pointed curved tip | Serrated gripping surfaces Surface Nickel-plated Nickel-plated Nickel-plated Bare Nickel-plated Lacquered Special stainless Material Tool steel Tool steel Tool steel steel Tool steel Tool steel Ident. No. 510 530 540 560 570 580 53012... ● ● ● ● ● ● Prod. Gr. 596

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1439 Availability subject to country specific rules and regulations.

1438_EN_2018_KERN[21855082]-q.indd 1439 12/17/2018 3:36:14 PM Hand tools \ Tweezers

Cross-over tweezers

Execution: . Nickel-plated, good clamping properties, made from spring steel

Length (mm) Tweezer design 160 Flat, wide jaws | Ident. No. 080 53005... Toothed ● Prod. Gr. 535

Cross-over tweezers Special steel

Application: Advantage: For precise gripping and automatic holding of the . Cross-over tweezers, self-locking smallest parts. No. 53016 Execution: . Special steel, nickel-plated . With hand guard, particularly suitable for soldering

Tweezer No. 53017 Length (mm) design Surface Material 160 Angled tip Nickel-plated Tool steel Ident. No. 510 53016... ● 155 Straight, ﬂ at Nickel-plated Tool steel Ident. No. 510 53017... tip ● Prod. Gr. 596

Tweezers Special steel

Execution: Advantage: . Special steel, rustproof . With magnifying glass (30-mm diameter) 3-4x magniﬁ cation Delivery: In case Length (mm) 110 Tweezer design Pointed head Surface Bare Material Tool steel Ident. No. 510 53020... ● Prod. Gr. 596

Component tweezers Stainless steel

Execution: Technical data: . Stainless steel . Length: 145 mm . For diameters from 2.5-5 mm . Surface: Bare . Material: Stainless steel

Ident. No. 510 Ident. No. 520 Ident. No. 540

Suitable for Vertical components Horizontal components Diagonally positioned components Ident. No. 510 520 540 53021... ● ● ● Prod. Gr. 596

Source: Hahn+Kolb Werkzeuge GmbH 1440Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1440_EN_2018_KERN[21855085]-s.indd 1440 12/17/2018 3:36:22 PM Hand tools \ Tweezers

Tweezers Stainless steel

Execution: Advantage: . Ident. No. 560: With gripper for pulling out seized components up to 10 mm . Ident. No. 560, 600: Non-magnetic . Ident. No. 580: So coating, for gripping ceramic components . Ident. No. 580: Coating resistant up to 300°C . Ident. No. 600: Titanium, resistant to chemicals . Ident. No. 610: Anti-allergenic coating . Ident. No. 610: PTFE-coated . Ident. No. 620: Heat-resistant up to 220°C . Ident. No. 620: Black plastic

Ident. No. 550 Ident. No. 560 Ident. No. 580 Ident. No. 600 Ident. No. 610 Ident. No. 620

Length (mm) 145 145 145 120 145 120 Tweezer design Flat, wide jaws Flat, wide jaws | Flat, wide jaws | Pointed jaws Round, straight, Flat, wide jaws | Curved jaws So coating ﬁ nely serrated tip Straight Surface Bare Bare Bare Bare Bare - Material Stainless steel Stainless steel Stainless steel Titan Stainless steel Plastic Ident. No. 550 560 580 600 610 620 53021... ● ● ● ● ● ● Prod. Gr. 596

Tweezer sets Stainless steel

Execution: . 1 pair of pointed tweezers, hardened, 145 mm . Ident. No. 800: 5-piece set in tweezers pouch, long fi tted with electronic tweezers no. 53021 510-560 . 1 gripping pincers with rounded grip ends, 145 . Ident. No. 810: mm long . 10-piece set in tweezers pouch, fi tted with: . 1 pair of installation tweezers, bent, 155 mm long . 1 pair of electronics tweezers no. 53021 510-560 . 2 pairs of precision tweezers, 130 and 105 mm Technical data: long, fi ne and very fi ne tips . Surface: Bare . Material: Stainless steel Ident. No. 800

Ident. No. 810

Number of pieces in assortment/set (PCS) 5 10 Ident. No. 800 810 53021... ● ● Prod. Gr. 596

Tweezers, plastic-coated Stainless steel

Application: Advantage: For precise gripping of very small live parts. . Ident. No. 530: Non-magnetic

Execution: Technical data: . Insulated version . Surface: Plastic-coated . Material: Stainless steel

Ident. No. 520 Ident. No. 530 Ident. No. 510

Length (mm) 155 145 130 Straight, blunt, wide, ﬁ nely serrated Tweezer design Curved, narrow, ﬁ nely serrated tip tip Straight tip Ident. No. 510 520 530 53022... ● ● ● Prod. Gr. 596

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1441 Availability subject to country specific rules and regulations.

1440_EN_2018_KERN[21855085]-s.indd 1441 12/17/2018 3:36:27 PM Hand tools \ Tweezers

VDE insulated tweezers

Application: . Ident. No. 110–120: Finely serrated gripping surfaces For precise gripping of very small live parts. . Ident. No. 130: Serrated gripping surfaces

Execution: Technical data: . Dip-insulated . Surface: Nickel-plated . Certiﬁ ed to IEC 60900 . Material: Spring steel . Ident. No. 100: Matt gripping surfaces for optimum hold . VDE certiﬁ ed: Yes

Ident. No. 100 Ident. No. 110 Ident. No. 120 Ident. No. 130

Length (mm) 130 150 150 145 Rounded tip, grooves on end Tweezer design Fine, straight tip Fine, straight tip Angled tips of gripper Ident. No. 100 110 120 130 53023... ● ● ● ● Prod. Gr. 535

Stripping side cutters

Application: Advantage: For cutting and stripping cables. . Long tips for highly precise cutting tasks, even in conﬁ ned conditions Execution: . Improved ratio with 25% higher cutting rate . Vanadium electric steel, forged, oil-hardened . Safe, ergonomic and fatigue-free working thanks to . With longer blade two-component handles . Inductively hardened, precision cutting edges Ident. No. 010 . Comfortable cutting of NYM cables up to 5 x 2.5 Technical data: mm2 . Length: 160 mm . VDE type according to DIN EN . Material of the grip handle: 2-component plastic Ident. No. 020: 2 60900 . Min./max. stripper size: 1.5-2.5 mm

Surface Bare Chrome-plated Ident. No. 020 VDE certiﬁ ed No Yes Ident. No. 010 020 53108... ● ● Prod. Gr. 535

Wiring pliers

Application: . Cuts so wire up to 2.5 mm For gripping cables and wires, for bending, for cut- . Cuts hard wire up to 1.6 mm ting cables, stripping and crimping wire end ferrules, . Ident. No. 020: Polished head simply indispensable when it comes to electrical installations. Advantage: . Ideal for cabling tasks, all required functions in a Ident. No. 010 Execution: single tool . Vanadium electric steel, forged, oil-hardened . Ident. No. 020: Safe, ergonomic and fatigue-free . Additionally inductively hardened, precision cutting working thanks to two-component handles edges

Ident. No. 020

Length (mm) 160 160 Min./max. stripper size 0.5-2.5 mm2 0.5-2.5 mm2 Surface Bare Bare Material of the grip handle Polyvinyl chloride 2-component plastic Ident. No. 010 020 53109... ● ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH 1442Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1442_EN_2018_KERN[21855088]-r.indd 1442 12/17/2018 3:36:27 PM Hand tools \ Stripping and crimping tools

Wire stripping pliers With spiral spring

Execution: . Tool steel, tempered . With coiled opening spring . VDE type according to DIN EN 60900 . With adjusting screw and locking nut Advantage: . Ident. No. 650: Special tool steel, oil-hardened . Safe, ergonomic and fatigue-free working thanks to . Ident. No. 700: two-component handles with hand guard

Ident. No. 650

Ident. No. 700

Length (mm) 160 160 Min./max. stripper size 0.5-6 mm2 0.5-6 mm2 VDE certiﬁ ed No Yes Surface Chrome-plated Chrome-plated Material of the grip handle 2-component plastic 2-component plastic Ident. No. 650 700 53572... ● ● Prod. Gr. 597

Wire stripping pliers

Application: . With opening spring Ident. No. 010: For cutting and stripping single and multi-strand conductors and . Ident. No. 030: VDE type according to DIN EN 60900 fi ne-wired conductors. Ident. No. 015–030: For stripping single and multi-strand conductors and fi ne- Advantage: wired conductors. . Easy to adjust to the required wire or fl ex diameter using knurled thumb screw with jam nut Execution: . Special tool steel, oil-hardened

Ident. No. 010 Ident. No. 020 Ident. No. 030 Ident. No. 015

Length (mm) 160 140 160 160 Min./max. stripper size 1.5-5 mm2 0.01-0.75 mm2 1.5-5 mm2 1.5-5 mm2 VDE certiﬁ ed No No No Yes Surface Bare Bare Bare Chrome-plated Material of the grip handle Polyvinyl chloride 2-component plastic 2-component plastic 2-component plastic Ident. No. 010 015 020 030 53110... ● ● ● ● Prod. Gr. 535

Sheath stripping pliers VDE tested

Application: . Simple and damage-free sheath stripping owing to Cutting, sheath stripping and stripping of insulation cutting proﬁ le with safety shoulders with one set of pliers . Laterally positioned 1.5 and 2.5 mm2 precision insulation holes and side cutters for cabling Execution: . Sheath stripping values 8-13 mm . Slender head shape with angled cable sheathing cutter facilitates optimal access to deep-set insulation points. Length (mm) 165 VDE certiﬁ ed Yes Surface Chrome-plated Material of the grip handle 2-component plastic Ident. No. 100 53110... ●

Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1443 Availability subject to country specific rules and regulations.

1442_EN_2018_KERN[21855088]-r.indd 1443 12/17/2018 3:36:29 PM Hand tools \ Stripping and crimping tools

Cable and sheath stripping knives VDE tested

Execution: . With sliding shoe on the tip, prevents damage . Insulating multi-component handle, VDE type when stripping according to DIN EN 60900 . Ident. No. 010: Robust, fi xed blade with straight Technical data: edge . VDE certifi ed: Yes . Material of the grip handle: 2-component plastic . Ident. No. 020: Ident. No. 010 . Robust, fi xed hook blade, crescent-shaped

Length (mm) 185 155 Ident. No. 010 020 53604... ● ● Prod. Gr. 535 Ident. No. 020

Work knives and electrician’s knives

Application: . Ident. No. 010: Ident. No. 010: For universal cutting of a wide range . Rustproof blade with serrated edge of materials. . Blue plastic grips Ident. No. 020: For cutting and stripping PVC . Blade is locked via pushbutton Ident. No. 010 cables. . Blade stopper . Ident. No. 020: Execution: . Rustproof blade with two stripping notches . Non-slip . Red plastic grips . Blade with lock

Length (mm) 190 191 Ident. No. 020 Ident. No. 010 020 53603... ● ● Prod. Gr. 582

Cable knives Fixed blade

Length (mm) 190 Material of the grip handle Wood Ident. No. 010 53610... ● Prod. Gr. 598

Cable knives

Application: Execution: Ident. No. 005: For cutting cables. . Foldable Ident. No. 010: For cutting and stripping cables. . Ident. No. 010: Blade with double scraper Ident. No. 005

Length (mm) 191 185 Material of the grip handle Wood Plastic Ident. No. 005 010 53615... ● ● Prod. Gr. 598 Ident. No. 010

Source: Hahn+Kolb Werkzeuge GmbH 1444Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1444_EN_2018_KERN[21855091]-o.indd 1444 12/17/2018 3:36:27 PM Hand tools \ Stripping and crimping tools

Cable knives With blade and awl

Application: Execution: For cutting cables and poking holes. . Two-piece Length (mm) 170 Material of the grip handle Wood Ident. No. 010 53617... ● Prod. Gr. 598

Cable knives 4-piece

Application: . Screwdriver For cutting and stripping cables and poking holes. . Awl . With brass inlay Execution: . Large and small blade Length (mm) 170 Material of the grip handle Plastic Ident. No. 010 53619... ● Prod. Gr. 598

Cable knives

Application: . Ident. No. 026: Optimum safety through retractable hooked blade Ident. No. 010–026: For stripping sheathing from all common types of round . Ident. No. 028: For ﬁ ne strand and solid conductors with PVC insulation. Also cables, including waterproof cables. with stripping station in housing for 0.5-6 mm2 Execution: Advantage: . Ident. No. 010–026: Cutting depth is adjusted using the adjusting screw on the . Ident. No. 010–026: The rotating inner blade automatically adjusts to the long end of the handle cut a er the round cut . Ident. No. 022: For ribbon cables and ﬂ at cables

Ident. No. 022 Ident. No. 024 Ident. No. 010–020 Ident. No. 026 Ident. No. 028

Version No pre-cutter No pre-cutter Hook blade Straight blade Hook blade With spring Length (mm) 140 140 185 185 145 145 Min./max. cable Ø 4-16 mm 8-28 mm 4-28 mm 4-28 mm 4-28 mm 4-28 mm 2-component 2-component 2-component 2-component 1-component 1-component Material of the grip handle plastic plastic plastic plastic plastic plastic Ident. No. 010 020 022 024 026 028 53631... ● ● ● ● ● ● Prod. Gr. 598 Coax, round cable stripping tool and data cable stripper

Application: . Ident. No. 060: Adjustment of cutting depth not necessary. Length 120 mm. Ident. No. 050: Stripping of all common coaxial cables in just 2 steps. For cables from 8-13 mm Ident. No. 060: For round and wet room cabling, facilitates ﬂ ush stripping includ- . Ident. No. 070: Adjustable inner blade and side cutter. For cables from 4-10 ing in hard-to-reach places. mm and stranded wires from 0.2-0.8 mm Ident. No. 070: For stripping data lines and stranded wires. . Ident. No. 080: Ident. No. 080: removes coating from round cables, strips insulation and cuts . round cut, longitudinal cut, stripping, cutting – all with one tool them . hooked blade can be locked in any position . multi-functional with optimised cable routing Execution: . Ident. No. 050: Adjustment of cutting depth not necessary. Length 110 mm. For cables from 4.8-7.5 mm

Ident. No. 050 Ident. No. 080 Ident. No. 070 Ident. No. 060

Min./max. stripper size - - - 6-0.5 mm2 Min./max. cable Ø 4.8-7.5 mm 8-13 mm 4-10 mm 8-13 mm Material of the grip handle 1-component plastic 1-component plastic 2-component plastic 1-component plastic Ident. No. 050 060 070 080 53592... ● ● ● ●

Prod. Gr. 598

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1445 Availability subject to country specific rules and regulations.

1444_EN_2018_KERN[21855091]-o.indd 1445 12/17/2018 3:36:30 PM Hand tools \ Stripping and crimping tools

Wire and sheath stripping tools

Application: . Ident. No. 035–040: Adjustable cutting depth using the adjusting screw on the Ident. No. 010: For unsheathing and stripping insulation from circular cables. end of the handle Ident. No. 021: For unsheathing circular cables and stripping ﬂ exible and solid conductors. Advantage: . Titanium-nitride-coated blades for increased cutting speed and longer service Ident. No. 031: For unsheathing and stripping co-axial cables. life Ident. No. 035–038: For unsheathing round cables. . Ident. No. 010–031: No need to adjust the blades to the cutting depth Ident. No. 040: For stripping all standard round cables. . Ident. No. 031: Two-component handle sections for a secure hold Execution: . Ident. No. 035–040: . High-quality, wear-proof polyamide housing . Automatically adjusts to round and longitudinal cut . Secure grip on the handle thanks to so inlay on the handle . Ident. No. 010–021: Fastening clip for safe storage . Ident. No. 021: Contoured blade for stripping wires 0.2/0.3/0.8/1.5/2.5/4.0 2 Technical data: mm . Material of the grip handle: Plastic . Ident. No. 031: . Easy-to-see internal length scale . 2 pairs of blades for two-stage stripping

Ident. No. 040 Ident. No. 010 Ident. No. 021 Ident. No. 031

Ident. No. 035–036 Ident. No. 037–038

Model No. 12 No. 15 Secura No. 1 Secura No. 16 Secura No. 27 Secura No. 35 No. 50 No. 28 H Coaxi Secura Length (mm) 120 125 98 132 132 150 170 170 Min./max. cable Ø 8-13 mm 8-13 mm 4.8-7.5 mm 4-16 mm 8-28 mm 27-37 mm 35-50 mm 8-28 mm Ident. No. 010 021 031 035 036 037 038 040 53562... ● ● ● ● ● ● ● ● Prod. Gr. 543

Stripping tool Ergonomic handle design for eﬀ ortless work

Application: . Ident. No. 030: For round cable diameter from For unsheathing round PVC cables. 8-173 mm

Execution: Advantage: . Self-clamping retaining bracket . Blade can be rotated for longitudinal cuts . Variable cutting depth adjustment . Adjustment option for spiral-shaped cutting of hard Technical data: . Material of the grip handle: Plastic insulation Ident. No. 010 . Ident. No. 010: For round cable diameter from 6-25 mm

Model AM 16 AM 25 Length (mm) 53 135 Ident. No. 030 010 53564... ● ● Prod. Gr. 543 Accessories for 53564 010 100 53564... Spare blades (2x) Ident. No. ● Ident. No. 030

Source: Hahn+Kolb Werkzeuge GmbH 1446Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1444_EN_2018_KERN[21855091]-o.indd 1446 12/17/2018 3:36:32 PM Hand tools \ Stripping and crimping tools

Automatic wire stripping pliers

Application: Advantage: For automatic stripping of all standard cable . The conductors are not damaged — automatically cross-sections and insulation materials. adapts to diff erent cross-sections . Light, manageable design for ease of use Execution: . Streamlined head shape for use in diffi cult-to- . Blade: Special tool steel, oil-hardened, reach work areas interchangeable . Housing: Plastic, glass fi bre reinforced . With wire cutters for copper and aluminium conductors up to max. 2.5 mm2 . With adjustable length stop from 6.0-18.0 mm

Length (mm) 180 Min./max. stripper size 0.2-6 mm2 Material of the grip handle Plastic Ident. No. 010 53111... ● Prod. Gr. 535 Automatic wire stripping pliers

Application: Advantage: For automatic stripping of all standard cable . The single conductors are not fanned out cross-sections and insulation materials. . The conductors are not damaged thanks to the special shaped blades Execution: . Blade inserts are simple to replace . Can be used on PVC, PTFE and silicone insulation Model Mini-duro-stripax Length (mm) 135 Min./max. stripper size 0.08-1 mm2 Material of the grip handle Plastic Ident. No. 010 53582... ● Prod. Gr. 543 Automatic wire stripping pliers Self-adjusting

Application: . Length stop adjustable from 5-12 mm For automatic stripping of ﬁ ne-strand and solid . ref. no. 510 : For unsheathing and stripping conductors with PVC insulation. . Side-cutters up to maximum 3 mm in diameter Execution: Advantage: . Interchangeable high-quality, hardened steel . Also suitable for use in hard-to-reach areas thanks inserts to the narrow jaws . Fully insulated, robust design made from ﬁ bre . The external insulation is not damaged thanks to a glass-reinforced polyamide special gauging system . With ergonomic handles and additional locking Ident. No. 500 option

Ident. No. 510

Length (mm) 170 170 Min./max. stripper size 0.2-6 mm2 0.5-16 mm2 Material of the grip handle 1-component plastic 1-component plastic Ident. No. 500 510 53580... ● ● Prod. Gr. 598

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1447 Availability subject to country specific rules and regulations.

1447_EN_2018_KERN[21855095]-s.indd 1447 12/17/2018 3:36:22 PM Hand tools \ Stripping and crimping tools

Automatic wire stripping pliers

Application: Advantage: For automatic stripping of conductors with PVC . The blades automatically adjust to the conductor insulation. cross-section Execution: . With cable cutter and length stop . With three-stage insulation thickness setting

Length (mm) 200 Min./max. stripper size 0.08-6 mm2 Material of the grip handle Plastic Ident. No. 010 53585... ● Prod. Gr. 597 Stripax automatic wire stripping pliers

Execution: . Ident. No. 020: Suitable for PVC insulated, fi ne- . Housing made from fi bre glass-reinforced strand and solid conductors. polyamide . Ident. No. 030: Particularly suitable for UL-spec- . Maximum stripping length: 25 mm ifi ed conductors and halogen-free insulation . With integrated cable cutters for cross-sections materials. 2 up to 6 mm Advantage: . Ident. No. 010: Suitable for PVC insulated, fi ne- . The conductors are not damaged thanks to the strand conductors special, self-adjusting stripping blade Ident. No. 010–020 Model stripax stripax 16 stripax ultimate Length (mm) 190 190 190 Min./max. stripper size 0.08-10 mm2 6-16 mm2 0.14-6 mm2 Material of the grip handle Plastic Plastic Plastic Ident. No. 010 020 030 53584... ● ● ● Prod. Gr. 543 Accessories for 53584 010 53584 020 53584 030 Spare blade Ident. No. 101 120 130 53584... ● ● ●

Automatic wire stripping pliers patented

Application: . Ident. No. 005–010: Ident. No. 005: For automatic stripping of single and . Blade: Special tool steel, oil-hardened multi-strand conductors and fi ne-wire conductors . Housing: Plastic, glass fi bre reinforced with plastic or rubber insulation. . Ident. No. 010: Ident. No. 010: For automatic stripping of single and . With deep-set wire cutter for copper and multi-strand conductors and fi ne-wire conductors aluminium multi-strand conductors up to 10 mm2 with an array of insulation materials. and solid-wire conductors up to 6 mm2 Ident. No. 015: for automatic stripping of single and . With adjustable length stop multi-strand conductors and fi ne-wire conductors . Ident. No. 015: with plastic or rubber insulation. . blade: special tool steel, oil-hardened Ident. No. 005 . housing: glass-fi bre-reinforced plastic Execution: . adjustable length stop . Ident. No. 005: . cutting depth can be adjusted for diff erent insu- . With adjustable longitudinal stop lation materials . Cutting depth can be adjusted for diff erent . with wire cutter for copper and aluminium multi- insulation materials strand conductors up to 10 mm2 and solid-wire . With wire cutter for copper and aluminium multi- conductors up to 6 mm2 strand conductors up to 10 mm2 and solid-wire conductors up to 6 mm2

Length (mm) 200 195 200 Ident. No. 010 Min./max. stripper size 0.03-10 mm2 0.03-10 mm2 2.5-16 mm2 Material of the grip handle Plastic Plastic Plastic Ident. No. 005 010 015 53112... ● ● ● Prod. Gr. 535 Accessories for 53112 005 53112 010 53112... Replacement blades Ident. No. 095 100 block ● ●

Source: Hahn+Kolb Werkzeuge GmbH 1448Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1447_EN_2018_KERN[21855095]-s.indd 1448 12/17/2018 3:36:26 PM Hand tools \ Stripping and crimping tools

Precision wire stripping pliers with shaped blades

Application: . With additional cable guide for precise positioning Ident. No. 010: For positive stripping of diffi - of the cable on the knife stripping points cult-to-remove insulation materials too made from . The pliers open automatically once the stripping PTFE, silicone and rubber. process is complete Ident. No. 020: For form-fi tting stripping of diffi - . Ident. No. 010: cult-to-remove insulation materials too made from . A second pair of knives holds the remaining PTFE, silicone and rubber. insulation fi rmly in place . With adjustable length stop for identical stripping Ident. No. 010 Execution: lengths during series tasks . Blade: Special tool steel, oil-hardened . Ident. No. 020: . Pliers body: Steel . A second pair of blades holds the remaining insulation fi rmly in place Advantage: . With adjustable longitudinal stop for identical . Replaceable shaped blades precisely tailored to stripping lengths during series tasks the respective conductor cross-section Length (mm) 195 195 Min./max. stripper size 0.03-2.08 mm2 2.5-10 mm2 Material of the grip handle 2-component plastic 2-component plastic Ident. No. 010 020 53113... ● ● Prod. Gr. 535

Pliers for wire end ferrules

Execution: Advantage: . Polished head . Marked semi-circular sections for reliable connection between sheath and conductor . Ident. No. 003–004: Safe, ergonomic and fatigue- free working thanks to two-component handles Ident. No. 002

Ident. No. 004

Length (mm) 145 180 145 180 Suitable for min./max. Ø 0.25-2.5 mm 0.25-16 mm 0.25-2.5 mm 0.25-16 mm Material of the grip handle Polyvinyl chloride Polyvinyl chloride 2-component plastic 2-component plastic Ident. No. 001 002 003 004 53145... ● ● ● ● Prod. Gr. 597

Wire end ferrule assortment

Execution: . With voltage tester . With wire end ferrule pliers, 0.5-4 mm2 . 100x wire end ferrules 0.5/0.75/1.5/2.5 mm2 and 50x 4 mm2

010 53125... Ident. No. ● Prod. Gr. 597

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1449 Availability subject to country specific rules and regulations.

1449_EN_2018_KERN[21855099]-s.indd 1449 12/17/2018 3:36:23 PM Hand tools \ Stripping and crimping tools

Crimping pliers

Execution: . Ident. No. 015: Safe, ergonomic and fatigue-free working thanks to two-com- . Polished head ponent handles . Ident. No. 015, 025: VDE type according to DIN EN 60900 . Ident. No. 020: 30% easier crimping thanks to improved ratio . Ident. No. 020: Nine particularly deep proﬁ les with conical side areas . Ident. No. 025: Improved ratio for 30% easier crimping . Ident. No. 120: With front insertion . Ident. No. 120: Particularly suited for working in hard-to-reach areas, such as in conﬁ ned and deep control cabinets Advantage: . Ident. No. 010–020: Crimping in marked trapezoidal sections for secure connection between sheath and conductor

Ident. No. 020 Ident. No. 120 Ident. No. 010 Ident. No. 025

Length (mm) 145 146 180 185 180 Suitable for min./max. Ø 0.25-2.5 mm 0.25-2.5 mm 0.25-16 mm 0.25-16 mm 0.5-6 mm Material of the grip handle Polyvinyl chloride 2-component plastic Polyvinyl chloride 2-component plastic Polyvinyl chloride VDE certiﬁ ed - Yes - Yes - Ident. No. 010 015 020 025 120 53114... ● ● ● ● ● Prod. Gr. 535

Crimping tools

Application: . Ident. No. 010–020: Trapezoidal crimping Ident. No. 010–020: For crimping wire end ferrules with and without insulation. Advantage: Ident. No. 100: for crimping insulated cable lugs and . Ergonomically shaped plastic handles for fatigue- connectors free working

Execution: Technical data: . Lever system with unlockable force stop function . Material of the grip handle: Plastic . Adjustable crimping pressure Length (mm) 205 205 245 Suitable for min./max. Ø 0.5-6 mm 6-16 mm 1.0-6 mm Ident. No. 010 020 100 53508... ● ● ● Prod. Gr. 597

Crimping tools Basic and self-grip crimping pliers

Application: . Stripping device for conductor cross-sections of Ident. No. 505: For crimping non-insulated ﬂ at 0.75-6.0 mm2 connectors and insulated cable lugs, for cutting and . Crimping of cable lugs 0.5-1/1.5-2.5/4-6 mm2 stripping cables. . Ident. No. 505: Plastic handles, yellow Ident. No. 515: For crimping uninsulated cable lugs, . Ident. No. 515: Plastic handles, blue stripping insulation and cutting. Technical data: Ident. No. 505 Execution: . Suitable for min./max. diameter: 0.5-6 mm . Special steel, burnished . Material of the grip handle: Plastic . With screw cutter for M2.6 to M5

Ident. No. 515 Length (mm) 240 225 Ident. No. 505 515 53505... ● ●

Prod. Gr. 580

Source: Hahn+Kolb Werkzeuge GmbH 1450Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations. Hand tools \ Stripping and crimping tools

Crimping tools for wire end ferrules and cable connectors Self-adjusting

Execution: . Ident. No. 030: K 507 with replaceable pressing inserts – for 0.5-6 mm2 . With locking mechanism for consistent pressing results insulated connectors, wire end ferrules 0.14-10 mm2 and crimp-type cable lugs 2 . Ergonomically shaped multi-component handles with slip guard 0.5-10 mm . Ident. No. 010: K306K for wire end ferrules and twin wire end ferrules. Auto- . Rapid, tool-free pressing insert replacement without readjustment owing to matic cross-sectional area adjustment. special ﬁ xing system. . Lateral sleeve insertion. Hexagon crimping. Positioner for small ferrules . Captive replacement inserts housed in interior of handle. Adjustable tool pretension. . Ident. No. 020: K82A for insulated cable connectors. New lever mechanism reduces eﬀ ort by 33%. Wire and insulation compression is performed in a single work step. Optimal handling owing to reduced opening width. Technical data: . Material of the grip handle: 3-component plastic

Ident. No. 010 Ident. No. 020 Ident. No. 030

Model K306K K82A K507 Length (mm) 215 225 220 Suitable for min./max. Ø 0.08-16 mm 0.5-6 mm 0.14-10 mm Ident. No. 010 020 030 53501... ● ● ● Prod. Gr. 5JE Lever-action crimping pliers

Execution: . Ident. No. 030: For coax, BNC and TNC plug . Crimping pressure is factory-set for precision, can connectors RG 58/59/62/71 be adjusted . Ident. No. 040: For crimping uninsulated cable . Ident. No. 010: For crimping insulated cable lugs lugs and plug connectors. and plug connectors. . Ident. No. 050: For crimping wire end ferrules. . Ident. No. 020: Application: For crimping wire end ferrules. Advantage: . Consistently high crimping quality thanks to preci- . Ident. No. 020–050: Special grade chrome-vana- sion sockets and unlockable force stop function dium electric steel, oil-hardened . Manual force reduced by up to 30% compared to standard crimping pliers thanks to the lever ratio

Length (mm) 250 250 250 250 250 Suitable for min./max. Ø 0.5-6 mm 10-25 mm 3-10 mm 0.5-10 mm 35-50 mm Material of the grip handle 1-component plastic 1-component plastic 1-component plastic 1-component plastic 1-component plastic Ident. No. 010 020 030 040 050 53115... ● ● ● ● ● Prod. Gr. 535 Twistor 16 crimping pliers

Execution: . consistently high crimping quality thanks to force . self-adjusting crimping tool for wire end ferrules stop function (can be unlocked) . crimping head freely rotatable to 360°, with 8 locking positions Technical data: . Length: 200 mm . square crimp proﬁ le, high capacity range . Suitable for min./max. diameter: 0.14-16 mm Advantage: . Material of the grip handle: 2-component plastic . error-free, precise work — an opening for all cross-sections

Ident. No. 200 53115... ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1451 Availability subject to country specific rules and regulations.

1449_EN_2018_KERN[21855099]-s.indd 1451 12/17/2018 3:36:28 PM Hand tools \ Stripping and crimping tools

Lever-action crimping pliers Single-hand operation

Execution: Advantage: . Special grade chrome-vanadium electric steel, . Consistently high crimping quality thanks to preci- oil-hardened sion sockets and unlockable force stop function . Ident. No. 010: Crimping uninsulated butt . Safe, ergonomic and fatigue-free working thanks to connectors. two-component handles for one-handed operation . Ident. No. 020: Crimping uninsulated cable lugs . Knee lever creates additional force for fatigue-free and butt connectors. working . Ident. No. 030–040: For crimping uninsulated, . Good handling thanks to excellent handle adjust- open plug connectors. ment, light weight and compact design . Ident. No. 050: Crimping insulated cable lugs and plug connectors. . Ident. No. 060: For crimping wire end ferrules.

Model PreciForce 1 PreciForce 2 PreciForce 3 PreciForce 4 PreciForce 5 PreciForce 6 Length (mm) 220 220 220 220 220 220 Suitable for min./max. Ø 1.5-10 mm 0.5-10 mm 0.1-2.5 mm 0.5-6 mm 0.5-6 mm 0.25-6 mm 2-component 2-component 2-component 2-component 2-component 2-component Material of the grip handle plastic plastic plastic plastic plastic plastic Ident. No. 010 020 030 040 050 060 53116... ● ● ● ● ● ● Prod. Gr. 535 Crimping tool for wire end ferrules, square or hexagonal crimping Self-adjusting

Application: Advantage: For crimping wire end ferrules with self-adjustment . 20% less force applied when crimping function. . Reduced handle width and improved ergonomics, with 2-component handles Execution: . Consistently high crimping quality thanks to force . Special grade chrome-vanadium electric steel, stop function (can be unlocked) oil-hardened . Crimping pressure is factory-set for precision . Ident. No. 010: Self-adjusting square crimping . Knee lever creates additional force for fatigue-free . Self-adjusting hexagon crimping Ident. No. 020: working for cramped connection sizes Ident. No. 020 Length (mm) 180 180 Suitable for min./max. Ø 0.08-16 mm 0.08-10 mm Material of the grip handle 2-component plastic 2-component plastic Ident. No. 010 020 53117... ● ● Prod. Gr. 535 Crimping pliers with MultiCrimp changing magazine

Application: . Ident. No. 110: For crimping a range of connectors and sheaths. . Application 4: Uninsulated cable lugs and plug connectors from 0.5 to 10 mm2 Execution: . Application 5: Uninsulated, butt connectors from . Pliers: Special grade chrome-vanadium electric 1.5 to 10 mm2 steel, oil-hardened Advantage: . Round magazine: Plastic, glass ﬁ bre reinforced . Only one tool required for the most common . Application 1: Uninsulated, open plug-in connec- crimping applications tors from 0.5 to 6 mm2 . Fast and simple to replace the crimping inserts . Application 2: Insulated cable lugs and plug without the need for additional tools connectors from 0.5 to 6 mm2 . Secure and protected storage of replaceable . Application 3: Wire end ferrules from 0.25 to 6 mm2 inserts in a round magazine Length (mm) 250 250 Suitable for min./max. Ø 0.5-6 mm 0.5-10 mm 2-component 2-component Material of the grip handle plastic plastic 3 replaceable Ident. No. 100 53117... inserts ● - 5 replaceable Ident. No. - 110 53117... inserts ● Prod. Gr. 535 Crimping pliers for wire end ferrules self-adjusting

Execution: Advantage: . Special grade chrome-vanadium electric steel, . Self-adjusting to the required wire end ferrule size oil-hardened . Consistently high crimping quality thanks to force . Burnished pliers stop function (can be unlocked) . Front insertion of the wire end ferrules into the tool . Knee lever creates additional force for fatigue-free . Crimping pressure is factory-set for precision, can working be adjusted . Light, wieldy design for ease of use . Safe, ergonomic and fatigue-free working thanks to two-component handles

Source: Hahn+Kolb Werkzeuge GmbH 1452Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1452_EN_2018_KERN[21855103]-v.indd 1452 12/17/2018 3:36:22 PM Hand tools \ Stripping and crimping tools

Length (mm) 190 Suitable for min./max. Ø 0.08-10/16 mm Material of the grip handle 2-component plastic Ident. No. 010 53118... ● Prod. Gr. 535

Crimping pliers for Western connectors

Application: Advantage: crimping Western plugs, cutting and stripping of fl at, . Ident. No. 100: unshielded telephone cables . Precise crimping process by means of parallel crimping Execution: . Consistently high crimping quality thanks to . Ident. No. 100: force stop function (can be unlocked) . Burnished pliers . With length cutter and stripping knife for fl at . For 6 and 8-pin Western plugs type RJ 11/12 cables (9.65 mm wide) and for type RJ 45 (11.68 mm . With additional stripping function for round Ident. No. 100 wide) cables . Ident. No. 110: . Ident. No. 110: . burnished pliers . precise crimping process by means of parallel . for 4, 6 and 8-pin Western plugs type RJ 10 crimping (7.65 mm wide), RJ 11/12 (9.65 mm wide) and for . consistently high crimping quality thanks to force type RJ 45 (11.68 mm wide) stop function (can be unlocked) . length cutter and stripping knife for fl at cables . additional stripping function for round cables Ident. No. 110 Length (mm) 190 200 2-component 2-component Material of the grip handle plastic plastic Ident. No. 100 110 53118... ● ● Prod. Gr. 535

KNIPEX compression tool For COAX connectors

Application: . Rotating insert for diff erent connector types For crimping F, BNC and RGA connectors. . Suitable for RG 59/6/11 cables Execution: Advantage: . Rotating head piece for diff erent cable sizes . Robust design . Adjusting screw to accommodate diff erent connector lengths Length (mm) 175 Material of the grip handle Plastic Ident. No. 200 53118... ● Prod. Gr. 535

Insertion tool For LSA-Plus and identical designs

Application: . integrated draw hook and release blade for laying on strips, sockets and ﬁ elds . housing made of impact-resistant plastic

Execution: Technical data: . pressing in and cutting in one operation . Length: 175 mm . for UTP and STP cable with line dia. 0.4 to 0.8 mm . Material of the grip handle: Plastic

Ident. No. 300 53118... ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1453 Availability subject to country specific rules and regulations.

1452_EN_2018_KERN[21855103]-v.indd 1453 12/17/2018 3:36:26 PM Hand tools \ Stripping and crimping tools

Crimping tools

Application: . Rotating countersink with lock Ident. No. 005–025: For crimping wire end ferrules . Trapezoidal crimping with and without plastic collars. . Ident. No. 025: Crimping to European standard EN Ident. No. 050–055: For crimping PVC and polyam- 60947-1 ide-insulated connectors. . Ident. No. 050–055: . For cable lugs, pin-type cable lugs, parallel and Execution: series connectors and plug-in connectors . Ident. No. 005: . With stop for precise positioning of contacts . Conductor inserted from the front . Short lever travel Advantage: Ident. No. 010 . Ident. No. 005–016: Only one countersink . Force stop function guarantees high-quality required for the entire area crimping, unlocking option in the event of incorrect . Ident. No. 010, 020–055: Lateral conductor operation insertion Technical data: . Ident. No. 015: Rotating countersink for inserting . Material of the grip handle: 2-component plastic the sleeves from the front or from the side . Ident. No. 016:

Ident. No. 025

Model PZ 3 PZ 4 PZ 6 roto PZ 6 roto L PZ 16 PZ 50 CTI 6 G CTI 6 Length (mm) 200 200 200 200 200 250 250 250 Suitable for min./max. Ø 0.5-6 mm 0.5-4 mm 0.14-6 mm 0.14-6 mm 6-16 mm 25-50 mm 0.5-6 mm 0.5-6 mm Ident. No. 005 010 015 016 020 025 050 055 53510... ● ● ● ● ● ● ● ● Prod. Gr. 543

Crimping pliers, hexagonal and square crimping For wire end ferrules with and without plastic collars

Execution: . Forced locking guarantees crimping quality . Only one pressure countersink required for the . Ident. No. 010: Hexagonal crimping shape entire cross-sectional area . Ident. No. 020: Square crimping shape . Lateral wire end ferrule insertion Model PZ 10 HEX PZ 10 SQR Length (mm) 195 195 Suitable for min./max. Ø 0.14-10 mm 0.14-10 mm Material of the grip handle 2-component plastic 2-component plastic Ident. No. 010 020 53511... ● ● Prod. Gr. 543

Assortment boxes with wire end ferrules insulated or bare

Execution: . Ident. No. 130: insulated twin wire end ferrules . practical, clear shaker with swivel lid and opening with DIN colour coding, 50 pcs of each, 2x0.75 / for removal. 1.0 / 1.5 / 2.5 mm2 . Ident. No. 100: insulated wire end ferrules with . Ident. No. 140: insulated twin wire end ferrules DIN colour coding, 30 pcs of each, 0.25 / 0.34 / with DIN colour coding, 20 pcs 2x4, 10 pcs of each 0.5 and 1.0 mm2 2x6, 2x10, 5 pcs 2x16 mm2 . Ident. No. 110: insulated wire end ferrules . Ident. No. 150: non-insulated wire end ferrules, with DIN colour coding, 50 pcs of each, 0.5 and 500 pcs 0.5 and 0.75/400 pcs 1.0/300 pcs 2.5 mm2, 100 pcs of each, 0.75 / 1.0 / 1.5 mm2 1.5/200 pcs 2.5 mm2 . Ident. No. 120: insulated wire end ferrules with . Ident. No. 160: non-insulated wire end ferrules, Ident. No. 110 DIN colour coding, 50 pcs 4 mm2, 20 pcs of each, 6 150 pcs 4 mm2 , 75 of each 6 and 10 mm2, 50 pcs and 10 mm2, 10 pcs 16 mm2 16 mm2

insulated wire insulated wire insulated wire insulated twin insulated twin uninsulated wire uninsulated wire end ferrules end ferrules end ferrules wire end ferrules wire end ferrules end ferrules, end ferrules, 0.25-1.0 mm2 0.5-2.5 mm2 4-16 mm2 0.75-2.5 mm2 4-16 mm2 0.5-2.5 mm2 4-16 mm2 53119... 53119... 53119... 53119... 53119... 53119... 53119... Ident. No. Ident. No. Ident. No. Ident. No. Ident. No. Ident. No. Ident. No. 100 ● 110 ● 120 ● 130 ● 140 ● 150 ● 160 ● Prod. Gr. 535

Source: Hahn+Kolb Werkzeuge GmbH 1454Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1454_EN_2018_KERN[21855106]-t.indd 1454 12/17/2018 3:36:28 PM Hand tools \ Stripping and crimping tools

Wire end ferrule/cable lug/heat-shrink tubing assortment

Execution: . With 600x insulated ring, pin cable lugs, butt connectors, ﬂ at-blade 2 . Ident. No. 010: connector sleeves from 0.5 to 6 mm , assorted . Set of 2200 insulated wire end ferrules in robust multi-purpose case . Ident. No. 030: . For conductor cross-sections from 0.5-16 mm2/AWG 20-5 . Set of 220 heat shrink hoses in robust multi-purpose case . Ident. No. 020: . 8 sizes as heat shrink hose segments . Set in robust multi-purpose case . For conductors from 1-16 mm2 . Heat shrink temperature from 90°C, with 3:1 heat shrink rate . Dielectric strength of 20 kV, self-extinguishing

Ident. No. 010 Ident. No. 020 Ident. No. 030

010 53127... wire end ferrules assortment Ident. No. ● Cable lug assortment Ident. No. 020 53127... ● Shrink tube assortment Ident. No. 030 53127... ● Prod. Gr. 543 Cable screwing tool

Application: Execution: Ident. No. 108: Screwty M 8 model – for coated M . Problem-free bolting of all lines in conﬁ ned spaces 8 lines . Universal tool for bolting all common sensor and Ident. No. 112: Screwty M 12 model – for coated M actuator lines. 12 lines . Plug-in connectors can be loosened and screwed in tightly simply by turning, without great eﬀ ort. Model Screwty M 8 Screwty M 12 Length (mm) 200 200 Material of the grip handle 2-component plastic 2-component plastic Ident. No. 108 112 53512... ● ● Prod. Gr. 543 Cable screwing tool Metal

Application: . Ratchet function – no removal of tool necessary Screwing tool for cable screw connections in all between screwing operations designs . Genuine one-handed tool, no deformation of cable screw connection. Execution: . Inﬁ nitely adjustable width across ﬂ ats Model FleCaFix 11/24 FleCaFix 24/36 Length (mm) 190 204 Suitable for min./max. Ø 11-24 mm 24-36 mm Ident. No. 224 Ident. No. 211 224 53512... ● ● Prod. Gr. 543 Cable tie pliers

Application: . Automatic cutting mechanism For clamping and cutting cable ties. . For plastic cable ties up to a width of 4.8 mm, tape thickness up to 1.5 mm Execution: . Adjustable tensile force Model MK3SP Length (mm) 160 Ident. No. 010 53528... ● Prod. Gr. 519

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1455 Availability subject to country specific rules and regulations.

1454_EN_2018_KERN[21855106]-t.indd 1455 12/17/2018 3:36:30 PM Hand tools \ Stripping and crimping tools

Cable tie pliers

Application: Execution: For clamping and cutting cable ties. . Light metal housing . For plastic cable ties 2.4-4.8 mm in width Length (mm) 160 Ident. No. 010 53529... ● Prod. Gr. 543

Cable ties With plastic or metal latch

Application: Advantage: For quick, universal joining of cables and a wide range of other parts. . Temperature range -40°C to +85°C . Ident. No. 210–260, 410–450: UV-resistant Execution: . Made from halogen-free polyamide 6.6 (nylon) Delivery: 100 pieces in poly bag

Ident. No. 110–170 Ident. No. 210–260 Ident. No. 360 Ident. No. 410–450

100 x 2.5 200 x 2.5 140 x 3.5 280 x 3.5 200 x 4.5 360 x 4.5 360 x 7.5 Length x width mm mm mm mm mm mm mm 550 x 9 mm Version Colour Plastic latch Natural Ident. No. 110 120 130 140 145 150 160 170 53529... ● ● ● ● ● ● ● ● Plastic latch Black Ident. No. 210 220 230 240 245 250 260 53529... ● ● ● ● ● ● ● - 360 53529... Metal latch Natural Ident. No. ------● - Metal latch Black Ident. No. 410 450 53529... ● - - - - ● - - Prod. Gr. 543

Three-pin crimping pliers

Application: . adjustable pin opening width setting wires and cables, expanding grommets and . ultra-lightweight, solid design hoses. Technical data: Execution: . Length: 195 mm . injection-moulded plastic with forged, polished pins Max. cable Ø (mm) 4.5 9 15 28 Ident. No. 106 116 126 130 Ident. No. 106 53160... ● ● ● ● Prod. Gr. 543

3-C machinist’s hammers

Application: Advantage: For vibration-free striking that is gentle on joints. . With indestructible three-component handle (aluminium core, polyamide and rubber Execution: component) . Ergonomic and non-slip application . Forged protective handle collar and additional Technical data: protective handle sleeve . Material of the handle: Three-component plastic . DIN 1041 hammer head, C45 steel, electric-induc- . Handle fastening: Glued tively hardened . Protective handle sleeve available: Yes

Weight of head (kg) 0.3 0.5 1 1.5 2 Length (mm) 300 320 360 360 400 Ident. No. 030 050 100 150 200 51180... ● ● ● ● ● Prod. Gr. 520

Source: Hahn+Kolb Werkzeuge GmbH 1456Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1456_EN_2018_KERN[21855109]-p.indd 1456 12/17/2018 3:36:27 PM Hand tools \ Hammers

Machinist’s hammers ( DIN 1041 ) German type

Execution: Advantage: . Ergonomic Hickory wooden handle DIN 5111, . Head and handle are connected via a safety ring extremely rigid wedge . Extended hammer head eye with additional plastic protective handle sheath Technical data: . DIN 1041 hammer head, C45 steel, forged, hard- . Material of the handle: Hickory ened, annealed . Handle fastening: Splined . Protective handle sleeve available: Yes . Polished working surface

Weight of head (kg) 0.2 0.3 0.4 0.5 0.6 0.8 1 1.5 2 Length (mm) 280 300 310 320 330 350 360 380 400 Ident. No. 510 520 530 540 550 560 570 580 590 51188... ● ● ● ● ● ● ● ● ● Prod. Gr. 520

MaxxCra machinist’s hammers

Application: Advantage: For vibration-free and more powerful striking. . Fatigue-free working processes that are gentle on your joints thanks to 68% less recoil Execution: . 24% more impact force thanks to special connec- . Ergonomic Hickory wooden handle DIN 5111, tion between hammer head and handle extremely rigid . With additional rubber protective sleeve for the Technical data: handle . Material of the handle: Hickory . High-quality, special steel hammer head . Handle fastening: Vulcanised . Drop-forged with smooth-ground hammer edge . Protective handle sleeve available: Yes and face Weight of head (kg) 0.3 0.5 0.8 1 Length (mm) 300 320 350 360 Ident. No. 603 605 608 610 51181... ● ● ● ● Prod. Gr. 521

So -face attachments For machinist’s hammers

Application: Execution: Turns a machinist’s hammer into a so -face hammer. . Made from polyethylene Suitable for hammer weight (kg) 0.3 0.5 0.8 1 Ident. No. 030 050 080 100 51183... ● ● ● ● Prod. Gr. 558

ROTBAND-PLUS machinist’s hammers ( DIN 1041 ) DBGM patent no. 0703045

Execution: and wood screw turn the hammer head and handle . With long, hardened protective handle sheath into a single unit . Hammer head DIN 1041, forged, hardened and tempered Technical data: . Material of the handle: Hickory . Ergonomic Hickory wooden handle DIN 5111, . Handle fastening: Bolted with locking plate extremely rigid . Protective handle sleeve available: Yes Advantage: . With the safest possible connection; the protective handle sheath, ring-shaped wedge, fastening plate

Weight of head (kg) 0.1 0.2 0.3 0.4 0.5 0.6 0.8 1 1.5 2 Length (mm) 260 280 300 310 320 330 350 360 380 400 Ident. No. 410 420 430 440 450 460 480 500 515 520 51184... ● ● ● ● ● ● ● ● ● ● Prod. Gr. 558 Accessories for 51184 410 51184 420 51184 430 51184 440 51184 450 51184 460 51184 480 51184... Spare handle with Ident. No. 610 620 630 640 650 660 680 sleeve, wedge and fastening plate ● ● ● ● ● ● ●

Accessories for 51184 500 51184 515 51184 520 51184... Spare handle with Ident. No. 700 715 720 sleeve, wedge and fastening plate ● ● ●

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1457 Availability subject to country specific rules and regulations.

1456_EN_2018_KERN[21855109]-p.indd 1457 12/17/2018 3:36:29 PM Hand tools \ Hammers

Machinist’s hammers ( DIN 1041 ) German type

Execution: Technical data: . DIN 1041 hammer head, C45 steel, electric-induc- . Material of the handle: Ash tively hardened . Handle fastening: Splined . Polished impact surfaces . Ergonomically shaped ash handle, waterproofed, painted . With safety ring wedge

Weight of head (kg) 0.1 0.2 0.3 0.4 0.5 0.6 0.8 1 1.5 2 Length (mm) 260 280 300 310 320 330 350 360 380 400 Ident. No. 500 510 520 530 540 550 560 570 580 590 51180... ● ● ● ● ● ● ● ● ● ● Prod. Gr. 593

Machinist’s hammers With ﬁ breglass handle and hardened protective handle sleeve

Execution: Advantage: . Forged hammer head, solidly and permanently . Shatterproof ﬁ bre glass handle, largely resistant to glued to the handle damage, and resistant to weathering and common . With long, hardened protective handle sheath chemicals . With additional head locking device . Non-slip moulded rubber handle suitable for all Technical data: . Material of the handle: Fibreglass kinds of work . Handle fastening: Glued . Protective handle sleeve available: Yes

Weight of head (kg) 0.2 0.3 0.4 0.5 0.6 0.8 1 1.5 2 Length (mm) 280 300 310 320 330 350 360 380 400 Ident. No. 020 030 040 050 060 080 100 150 200 51185... ● ● ● ● ● ● ● ● ● Prod. Gr. 558

ULTRATEC machinist’s hammers 3-component handle

Execution: Advantage: . handle inseparably connected with the hammer . reduced vibration for fatigue-free work head . non-slip elastomer grip layer Technical data: . hammer head made from quality steel in line with . Material of the handle: Three-component plastic DIN 1041 . Handle fastening: Glued . handle with unbreakable ﬁ bre glass core and ergonomically shaped PP base layer

Weight of head (kg) 0.2 0.3 0.5 0.8 1 1.5 2 Length (mm) 280 300 310 340 360 380 400 Ident. No. 102 103 105 108 110 115 120 51186... ● ● ● ● ● ● ● Prod. Gr. 520

Source: Hahn+Kolb Werkzeuge GmbH 1458Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1456_EN_2018_KERN[21855109]-p.indd 1458 12/17/2018 3:36:30 PM Hand tools \ Hammers

Carpenter’s rooﬁ ng hammers ( DIN 7239 )

Execution: . polished head with chrome-plated steel tube . nail holder with strong permanent magnet handle . head and handle securely bolted . brown non-slip rubber handle . grooved impact track Advantage: . Ident. No. 001: . long-lasting indestructible professional design . black head with black phosphated steel tube handle Technical data: . black non-slip rubber handle . Weight of head: 0.6 kg . Ident. No. 002: . Material of the handle: Steel Ident. No. 001

Weight (kg) 0.96 0.98 Length (mm) 310 312 Ident. No. 001 002 51190... ● ● Prod. Gr. 520

Ident. No. 002

Roofer’s hammer ( DIN 7239 ) Southern German shape

Execution: Advantage: . Rubber handle . With extremely strong magnet . Handle lock . Nail holder and roughened face

Weight (kg) 0.95 Weight of head (kg) 0.6 Length (mm) 300 Material of the handle Steel Ident. No. 010 51190... ● Prod. Gr. 593

Sledgehammers German type

Execution: Technical data: . Forged hammer head to DIN 1042 . Handle fastening: Splined . Ground head, painted black, polished work . Material of the handle: Ash surfaces

Weight of head (kg) 3 4 5 6 8 Length (mm) 600 700 800 800 900 Weight (kg) 3.46 4.62 5.85 6.85 9.1 Ident. No. 030 040 050 060 080 51194... ● ● ● ● ● Prod. Gr. 558

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1459 Availability subject to country specific rules and regulations.

1459_EN_2018_KERN[21855113]-p.indd 1459 12/17/2018 3:36:31 PM Hand tools \ Hammers

CARBOTEC sledgehammers DBGM European patent no. 0703045

Execution: Advantage: . Forged hammer head to DIN 1042 . With the safest possible connection; the protective . Ground head, painted black, polished work handle sheath, ring-shaped wedge, fastening plate surfaces and wood screw turn the hammer head and handle . Ergonomic Hickory wooden handle DIN 5112, into a single unit extremely rigid . With long, hardened protective handle sheath Technical data: . Handle fastening: Bolted with locking plate . Material of the handle: Hickory . Protective handle sleeve available: Yes

Weight of head (kg) 3 4 5 6 8 Length (mm) 600 700 900 900 900 Weight (kg) 3.46 4.82 6.125 7.125 9.3 Ident. No. 530 540 550 560 580 51194... ● ● ● ● ● Prod. Gr. 558 Accessories for 51194 530 51194 540 51194 550 51194 560 51194 580 51194... Spare handle with Ident. No. 730 740 750 760 780 sleeve, wedge and fastening plate ● ● ● ● ●

Sledgehammers German type

Execution: Technical data: . C45 steel, inductively hardened . Handle fastening: Splined . Painted black, polished work surfaces . Material of the handle: Ash

Weight of head (kg) 1 1.25 1.5 2 Length (mm) 260 280 280 300 Weight (kg) 1.19 1.41 1.725 2.24 Ident. No. 010 020 030 040 51196... ● ● ● ● Prod. Gr. 593

Copper hammers Sledgehammer shape

Execution: . Ground impact surface and edges . Copper hardness: approx. 80-100 HB . Weight inserted in head, DIN hammer eye . No. 51197: . Head made from drawn copper rod material Technical data: . No sharp edges . Material of the handle: Hickory . Handle fastening: Splined . No. 51199: . Beryllium copper head, non-sparking, double strengthened, cold-formed

No. 51197 No. 51199 025–51199 150 No. 51199 200–51199 500 Weight of head (kg) 0.25 0.5 0.75 1 1.5 2 3 5 Length (mm) 300 320 350 360 380 400 900 900 Ident. No. 025 050 075 100 150 200 51197... ● ● ● ● ● ● - - Ident. No. 025 050 075 100 150 200 300 500 51199... ● ● ● ● ● ● ● ● Prod. Gr. 520

Composite rubber hammers ( DIN 5128 )

Execution: Technical data: . Painted handle . Material of the handle: Ash . Hard quality, approx. 90 Shore A

Head Ø (mm) 40 54 64 74 90 Length (mm) 300 320 330 350 360 Weight of head (kg) 0.11 0.22 0.39 0.59 0.94 Ident. No. 010 020 030 040 050 51204... ● ● ● ● ● Prod. Gr. 520 Source: Hahn+Kolb Werkzeuge GmbH 1460Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1459_EN_2018_KERN[21855113]-p.indd 1460 12/17/2018 3:36:33 PM Hand tools \ Hammers

So -face hammers

Application: Advantage: For controlled position impacts on workpieces in . Replaceable individual parts machine vices or during assembly tasks. Technical data: Execution: . Recoil-free: No . High-quality die-cast zinc base . Material of the handle: Ash . With impact protection on the handle . Impact insert, interchangeable: Yes . Blue cellulose acetate inserts . Handle fastening: Pinned

Head Ø (mm) 25 30 40 50 Length of head (mm) 86 95 107 115 Length (mm) 270 280 325 340 Ident. No. 025 030 040 050 51206... ● ● ● ● Prod. Gr. 520 Accessories for 51206 025 51206 030 51206 040 Spare impact insert Ident. No. 125 130 140 51206... ● ● ● 51206... Spare ash hammer Ident. No. 525 525 540 handle ● ● ● Accessories for 51206 050 Spare impact insert Ident. No. 150 51206... ● 51206... Spare ash hammer Ident. No. 540 handle ●

Plastic hammers

Execution: Technical data: . Made from cellulose acetate . Recoil-free: No . Hardness: medium, colour: yellow . Material of the handle: Ash . Impact insert, interchangeable: Yes . Handle fastening: Splined

Head Ø (mm) 22 27 32 35 40 50 Length of head (mm) 73 88 96 103 105 115 Length (mm) 250 260 280 280 320 340 Weight (kg) 0.145 0.225 0.32 0.4 0.55 0.9 Ident. No. 522 527 532 535 540 550 51207... ● ● ● ● ● ● Prod. Gr. 520 Accessories for 51207 522 51207 527 51207 532 51207 535 51207 540 51207 550 Screw-on spare heads Ident. No. 722 727 732 735 740 750 51207... ● ● ● ● ● ●

Nylon drop mallet Recoil-free

Application: For particularly gentle alignment and assembly work with precisely proportioned impact eﬀ ect. Technical data: . Recoil-free: Yes Execution: . Impact insert, interchangeable: Yes . White nylon inserts, hard Head Ø (mm) 20 30 40 Length of head (mm) 150 155 160 Length (mm) 150 155 160 Weight (kg) 0.215 0.47 0.785 Ident. No. 020 030 040 51219... ● ● ● Prod. Gr. 521 Accessories for 51219 020 51219 030 51219 040 Spare inserts Ident. No. 220 230 240 51224... ● ● ●

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1461 Availability subject to country specific rules and regulations.

1459_EN_2018_KERN[21855113]-p.indd 1461 12/17/2018 3:36:36 PM Hand tools \ Hammers

So -face hammers recoilless

Application: Advantage: Powerful impact action on metal while being gentle . Ergonomically designed rubber handle on muscles and joints thanks to lack of recoil. . Hammer body ﬁ lled with cast iron shot for recoil- free working Execution: . Impact heads made from shatterproof polyure- Technical data: thane, replaceable . Recoil-free: Yes . Powder-coated precision steel tube handle . Material of the handle: Steel . Impact insert, interchangeable: Yes . Handle fastening: Welded

Head Ø (mm) 30 40 50 Length of head (mm) 116 126 136 Length (mm) 351 376 386 Weight (kg) 0.46 0.58 0.76 Ident. No. 300 400 500 51208... ● ● ● Prod. Gr. 520 Accessories for 51208 300 51208 400 51208 500 Spare inserts Ident. No. 330 440 550 51208... ● ● ● So -face hammers recoilless

Application: Advantage: Ideally suited for straightening workpieces on . Gentle on arms and muscles as the recoil is machine tables. reduced . The metal shot in the hammer head doubles the Execution: impact eﬀ ect compared to standard hammers . Polyurethane heads, yellow, shatterproof, medium-hard Technical data: . Ident. No. 125–160: With steel tube handle and . Recoil-free: Yes Ident. No. 025–070 rubber grip . Impact insert, interchangeable: Yes

Ident. No. 125–160

Head Ø (mm) 25 30 35 40 45 50 60 70 Length of head (mm) 108 115 118 125 130 135 165 165 Length (mm) 320 350 355 375 380 385 420 430 Material of the handle Hickory Hickory Hickory Hickory Hickory Hickory Hickory Hickory Handle fastening Pinned Pinned Pinned Pinned Pinned Pinned Pinned Pinned Weight (kg) 0.32 0.46 0.58 0.76 1 1.25 2 2.6 Ident. No. 025 030 035 040 045 050 060 070 51221... ● ● ● ● ● ● ● ● Head Ø (mm) 25 30 35 40 45 50 60 Length of head (mm) 108 115 118 125 130 135 165 Length (mm) 288 290 300 305 310 365 375 Material of the handle Steel Steel Steel Steel Steel Steel Steel Handle fastening Welded Welded Welded Welded Welded Welded Welded Weight (kg) 0.52 0.6 0.7 0.85 1.06 1.4 2.05 Ident. No. 125 130 135 140 145 150 160 51221... ● ● ● ● ● ● ● Prod. Gr. 539 Accessories for 51221 025 51221 030 51221 035 51221 040 51221 045 51221 050 51221 060 Spare inserts Ident. No. 225 230 235 240 245 250 260 51221... ● ● ● ● ● ● ● Hickory spare handle Ident. No. 425 430 430 440 440 450 460 51221... ● ● ● ● ● ● ● Accessories for 51221 070 51221 125 51221 130 51221 135 51221 140 51221 145 51221 150 Spare inserts Ident. No. 270 225 230 235 240 245 250 51221... ● ● ● ● ● ● ● Hickory spare handle Ident. No. 460 51221... ● ------Accessories for 51221 160 Spare inserts Ident. No. 260 51221... ● 51221... Hickory spare handle Ident. No. -

Source: Hahn+Kolb Werkzeuge GmbH 1462Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1462_EN_2018_KERN[21855117]-w.indd 1462 12/17/2018 3:36:23 PM Hand tools \ Hammers

Supercra so -face hammers Recoil-free

Application: . Wearproof nylon reduces the impact noise when For controlled position impacts on workpieces in working with metal machine vices or during assembly tasks. Technical data: Execution: . Recoil-free: Yes . Nylon impact heads, white, hard, interchangeable . Material of the handle: Steel . Steel tube handle with ergonomic rubber grip . Impact insert, interchangeable: Yes . Handle fastening: Welded Advantage: . With cast iron shot in the hammer body for recoil- free, fatigue-free working processes that are gentle on your joints

Head Ø (mm) 25 30 35 40 50 60 Length of head (mm) 105 110 110 115 120 145 Length (mm) 270 290 295 300 310 325 Weight (kg) 0.385 0.585 0.69 0.805 1.15 1.75 Ident. No. 125 130 135 140 150 160 51223... ● ● ● ● ● ● Prod. Gr. 521 Accessories for 51223 125 51223 130 51223 135 51223 140 51223 150 51223 160 Spare inserts Ident. No. 225 230 235 240 250 260 51224... ● ● ● ● ● ●

Supercra so -face hammers Recoil-free

Application: Advantage: For controlled position impacts on workpieces in . With cast iron shot in the hammer body for recoil- machine vices or during assembly tasks. free, fatigue-free working processes that are gentle on your joints Execution: . Wearproof nylon reduces the impact noise when . Nylon impact heads, white, hard, interchangeable working with metal . Ident. No. 440–460: With ergonomically shaped, non-slip 3-component handle Technical data: Ident. No. 120–160 . Recoil-free: Yes . Impact insert, interchangeable: Yes

Ident. No. 440–460

Head Ø (mm) 20 25 30 35 40 50 60 40 Length of head (mm) 105 105 110 110 115 120 145 115 Length (mm) 300 305 330 335 360 370 370 370 Material of the handle Hickory Hickory Hickory Hickory Hickory Hickory Hickory Three-component plastic Handle fastening Pinned Pinned Pinned Pinned Pinned Pinned Pinned Glued Weight (kg) 0.245 0.325 0.46 0.56 0.715 0.99 1.705 0.79 Ident. No. 120 125 130 135 140 150 160 440 51224... ● ● ● ● ● ● ● ● Head Ø (mm) 50 60 Length of head (mm) 120 145 Length (mm) 380 390 Three-compo- Three-compo- Material of the handle nent plastic nent plastic Handle fastening Glued Glued Weight (kg) 1.04 1.625 Ident. No. 450 460 51224... ● ● Prod. Gr. 521 Accessories for 51224 120 51224 125 51224 130 51224 135 51224 140 51224 150 51224 160 Spare inserts Ident. No. 220 225 230 235 240 250 260 51224... ● ● ● ● ● ● ● Hickory spare handle Ident. No. 325 325 330 330 340 340 360 51224... ● ● ● ● ● ● ● Accessories for 51224 440 51224 450 51224 460 Spare inserts Ident. No. 240 250 260 51224... ● ● ● 51224... Hickory spare handle Ident. No. - - -

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1463 Availability subject to country specific rules and regulations.

1462_EN_2018_KERN[21855117]-w.indd 1463 12/17/2018 3:36:26 PM Hand tools \ Hammers

Supercra sledgehammers Recoil-free

Application: . Wearproof nylon reduces the impact noise when For constructing fences, straightening tasks, track working with metal construction, repair/service work, tool/machine construction. Technical data: . Recoil-free: Yes Execution: . Material of the handle: Hickory . Nylon impact heads, white, hard, interchangeable . Impact insert, interchangeable: Yes . Handle fastening: Pinned Advantage: . With cast iron shot in the hammer body for recoil- free, fatigue-free working processes that are gentle on your joints Head Ø (mm) 80 100 Length of head (mm) 200 210 Length (mm) 880 1000 Weight (kg) 4.41 7.05 Ident. No. 580 600 51224... ● ● Prod. Gr. 521 Accessories for 51224 580 51224 600 Spare inserts Ident. No. 780 800 51224... ● ● Hickory spare handle Ident. No. 810 820 51224... ● ● So -face hammers Recoil-free with hickory handle

Application: . The metal shot in the hammer head doubles the Ideally suited for straightening workpieces on impact eﬀ ect compared to standard hammers machine tables. Technical data: Execution: . Recoil-free: Yes . Polyurethane heads, shatterproof, blue, . Material of the handle: Hickory medium-hard . Impact insert, interchangeable: Yes . Handle fastening: Pinned Advantage: . Protective handle sleeve available: No . Gentle on arms and muscles as the recoil is reduced Head Ø (mm) 30 40 50 Length of head (mm) 115 125 135 Length (mm) 350 375 385 Weight (kg) 0.45 0.75 1.25 Ident. No. 510 520 530 51215... ● ● ● Prod. Gr. 593 Accessories for 51215 510 51215 520 51215 530 Spare inserts Ident. No. 510 520 530 51217... ● ● ● Hickory spare handle Ident. No. 430 440 440 51221... ● ● ● Ferroplex combination hammers

Application: . Ergonomically designed rubber handle Machinist’s hammer and so -face hammer in one: for ﬂ exible assembly tasks. Technical data: . Recoil-free: No Execution: . Material of the handle: Steel . Hammer face made from inductively hardened . Impact insert, interchangeable: Yes tempered steel . Handle fastening: Welded . So -face hammer side with replaceable nylon insert Head Ø (mm) 30 35 Length of head (mm) 120 125 Length (mm) 290 295 Weight (kg) 0.6 0.8 Ident. No. 900 901 51224... ● ● Prod. Gr. 521

Source: Hahn+Kolb Werkzeuge GmbH 1464Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1464_EN_2018_KERN[21855120]-r.indd 1464 12/17/2018 3:36:31 PM Hand tools \ Hammers

SIMPLEX so -face hammers With two composite rubber inserts

Application: Advantage: For medium-hard impact. . Thanks to the replaceable inserts, the hammer can be adapted to any required situation Execution: . With two composite rubber inserts Technical data: . Rubber: black, medium impact force, hardness . Material of the handle: Robinia approx. 95 Shore A . Handle fastening: Bolted

Head Ø (mm) 30 40 50 60 80 Length of head (mm) 90 110 135 145 175 Length (mm) 300 330 350 405 490 Weight (kg) 0.345 0.66 1.15 1.55 2.87 Ident. No. 030 040 050 060 080 51225... ● ● ● ● ● Prod. Gr. 521

SIMPLEX so -face hammers With 1 composite rubber insert and 1 super plastic insert each

Application: become dislodged, particularly when striking For medium-hard impact with good drag, particularly edges, resistant to grease and oil, and resistant to for striking edges. acids and alkaline solutions

Execution: Advantage: . Each with 1 composite rubber insert and 1 super . Thanks to the replaceable inserts, the hammer can plastic insert be adapted to any required situation . Rubber: black, medium impact force, hardness approx. 95 Shore A Technical data: . Material of the handle: Robinia . Super plastic: white, medium-hard impact, good . Handle fastening: Bolted draw, enormous notch impact strength, does not

Head Ø (mm) 30 40 50 60 Length of head (mm) 90 11 135 145 Length (mm) 300 330 350 405 Weight (kg) 0.345 0.64 1.13 1.5 Ident. No. 030 040 050 060 51226... ● ● ● ● Prod. Gr. 521

SIMPLEX so -face hammers With two nylon inserts

Application: Advantage: For maximum impact with high striking force. . Thanks to the replaceable inserts, the hammer can be adapted to any required situation Execution: . With two nylon inserts Technical data: . Nylon: white, maximum impact, high striking force, . Material of the handle: Robinia good notch impact strength, resistant to grease . Handle fastening: Bolted and oil

Head Ø (mm) 30 40 50 60 80 Length of head (mm) 90 110 135 145 175 Length (mm) 300 330 350 405 490 Weight (kg) 0.32 0.61 1.04 1.44 2.66 Ident. No. 030 040 050 060 080 51227... ● ● ● ● ● Prod. Gr. 521

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1465 Availability subject to country specific rules and regulations.

1464_EN_2018_KERN[21855120]-r.indd 1465 12/17/2018 3:36:34 PM Hand tools \ Hammers

SIMPLEX so -face hammers With 1 composite rubber insert and 1 plastic insert each

Application: Advantage: For medium-hard and hard impact for universal use. . Thanks to the replaceable inserts, the hammer can be adapted to any required situation Execution: . Each with 1 composite rubber insert and 1 plastic Technical data: insert . Material of the handle: Robinia . Rubber: black, medium impact force, hardness . Handle fastening: Bolted approx. 95 Shore A . Plastic: red, hard impact, resistant to grease and oil, universal application Head Ø (mm) 30 40 50 60 Length of head (mm) 90 110 135 145 Length (mm) 300 330 350 405 Weight (kg) 0.34 0.64 1.095 1.48 Ident. No. 030 040 050 060 51228... ● ● ● ● Prod. Gr. 521 SIMPLEX so -face hammers With 1 composite rubber insert and 1 nylon insert each

Application: . Nylon: white, maximum impact, high striking force, For medium-hard and maximum impact with high good notch impact strength, resistant to grease striking force. and oil

Execution: Advantage: . Each with 1 composite rubber insert and 1 nylon . Thanks to the replaceable inserts, the hammer can insert be adapted to any required situation . Rubber: black, medium impact force, hardness approx. 95 Shore A Technical data: . Material of the handle: Robinia . Handle fastening: Bolted

Head Ø (mm) 30 40 50 60 80 Length of head (mm) 90 110 135 145 175 Length (mm) 300 330 350 405 490 Weight (kg) 0.335 0.635 1.105 1.51 2.77 Ident. No. 030 040 050 060 080 51229... ● ● ● ● ● Prod. Gr. 521

Replacement hammer inserts for SIMPLEX so -face hammers

Application: . Ident. No. 230–260: Hard impact, resistant to grease and oil, universal As spare insert for so -face hammer SIMPLEX application . Ident. No. 330–380: Medium-hard impact, good draw, enormous notch Execution: impact strength, does not become dislodged, particularly when striking edges, . Ident. No. 130–180: Maximum impact, high striking force, good notch impact resistant to grease and oil, and resistant to acids and alkaline solutions strength, resistant to grease and oil . Ident. No. 430–480: Hard, maximum impact force, made from an AlCu special alloy

Ident. No. 130–180 Ident. No. 230–260 Ident. No. 330–380 Ident. No. 430–480

Head Ø (mm) 30 40 50 60 80 Colour Nylon White Ident. No. 130 140 150 160 180 51230... ● ● ● ● ● Plastic Red Ident. No. 230 240 250 260 51230... ● ● ● ● - Super plastic White Ident. No. 330 340 350 360 380 51230... ● ● ● ● ● So metal Alumetallic Ident. No. 430 440 450 460 480 51230... ● ● ● ● ● Prod. Gr. 521

Source: Hahn+Kolb Werkzeuge GmbH 1466Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1466_EN_2018_KERN[21855123]-s.indd 1466 12/17/2018 3:36:32 PM Hand tools \ Hammers

Spare handle

Application: Technical data: As spare handle for SIMPLEX so -face hammer . Material of the handle: Robinia

Length (mm) 260 275 310 335 395 Ident. No. 030 040 050 060 080 51234... ● ● ● ● ● Prod. Gr. 521

Wooden mallets Hornbeam

Execution: Technical data: . Hornbeam head, with metal covering, smooth . Material of the handle: Ash ﬁ n i s h . Handle fastening: Splined

Head Ø (mm) 50 60 70 80 Length of head (mm) 100 120 140 160 Length (mm) 280 300 320 350 Weight (kg) 0.2 0.3 0.55 0.85 Ident. No. 050 060 070 080 51243... ● ● ● ● Prod. Gr. 593

Replacement handles for machinist’s hammer ( DIN 5111 ) Made of europlus hardwood, DIN 68340, quality class A

Application: . Waxed, with embossing As spare handle for DIN hammer heads. . For hammers with eyes to DIN 1195

Execution: Technical data: . Double-curved shape according to DIN 5111 . Material of the handle: Robinia

Suitable for hammer weight (kg) 0.1 0.2 0.3 0.4 0.5 0.6 0.8 1 1.5 2 Length (mm) 260 280 300 310 320 330 350 360 380 400 Ident. No. 260 280 300 310 320 330 350 360 380 400 51246... ● ● ● ● ● ● ● ● ● ● Prod. Gr. 520

Hammer handle wedges For optimal safety

Application: For fastening a hammer head to a handle.

Width (mm) 13 18 22 28 31 34 Ident. No. 010 020 030 040 050 060 51250... ● ● ● ● ● ● Prod. Gr. 520

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1467 Availability subject to country specific rules and regulations.

1466_EN_2018_KERN[21855123]-s.indd 1467 12/17/2018 3:36:35 PM Hand tools \ Hammers

Hammer handle wedge set, 36 assorted pieces For optimum safety

Application: For fastening hammer heads to handles. Composition of set 13/18/22/28/31/34 mm Number of pieces in assortment/set 36 Ident. No. 100 51250... ● Prod. Gr. 520

Flat chisel

Execution: . Inductively annealed impact heads . Hardened chrome-molybdenum-vanadium air-hard- . Painted sha ened steel 45CrMoV7 . Hardened and tempered evenly over the entire Technical data: length . Material: Chrome molybdenum Flat chisel . Smooth-ground working ends with transparent varnish Length (mm) 125 150 175 200 250 Width of cutting edge (mm) 15 18 21 24 25 Shank width x shank thickness 14 x 9 mm 17 x 11 mm 20 x 12 mm 23 x 13 mm 23 x 13 mm Ident. No. 010 020 030 040 050 51255... ● ● ● ● ● Prod. Gr. 558

Cross-cut chisel

Execution: . Inductively annealed impact heads . Hardened and tempered evenly over the entire . Painted sha length . Smooth-ground working ends with transparent Technical data: varnish . Material: Chrome molybdenum Cross-cut chisel

Length (mm) 125 150 175 200 Width of cutting edge (mm) 5 6 7 8 Shank width x shank thickness 14 x 9 mm 17 x 11 mm 17 x 11 mm 20 x 12 mm Ident. No. 210 220 230 240 51255... ● ● ● ● Prod. Gr. 558

Flat chisels

Execution: Technical data: . Tempered impact head . Material: Chrome-vanadium steel . Painted sha

Length (mm) 125 150 175 200 250 300 Width of cutting edge (mm) 15 18 21 24 25 26 Shank width x shank thickness 14 x 9 mm 17 x 11 mm 20 x 12 mm 23 x 13 mm 23 x 13 mm 23 x 13 mm Ident. No. 510 520 530 540 550 560 51256... ● ● ● ● ● ● Prod. Gr. 593

Cross-cut chisel

Execution: Technical data: . Tempered impact head . Material: Chrome-vanadium steel . Painted sha

Length (mm) 125 150 175 200 250 Width of cutting edge (mm) 5 6 7 8 9 Shank width x shank thickness 14 x 9 mm 17 x 11 mm 17 x 11 mm 20 x 12 mm 23 x 13 mm Ident. No. 510 520 530 540 550 51258... ● ● ● ● ● Prod. Gr. 593

Source: Hahn+Kolb Werkzeuge GmbH 1468Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1468_EN_2018_KERN[21855126]-v.indd 1468 12/17/2018 3:36:33 PM Hand tools \ Striking tools

Chisel sets

Execution: . each 1 ﬂ at chisel 150 x 12 x 16 and 125 x 10 x 12 mm . Tempered impact head . Cross-cut chisel 125 x 10 x 6 mm . Painted sha . each 1 dri punch 3 x 120, pin punch 4 x 150 mm . Lengths: 120-150 mm . Ident. No. 510–515: . each 1 ﬂ at chisel 150 x 11 x 10 and 125 x 11 x 10 mm . Centre punch 120 x 10 mm . Cross-cut chisel 125 x 10 x 5 mm . Ident. No. 010–015: . each 1 dri punch 3 x 120 and 4 x 120 mm

Ident. No. 010 Ident. No. 015, 515 Ident. No. 510

Material Chrome molybdenum Chrome-vanadium steel 010 51262... In holder with base Ident. No. ● - In metal case Ident. No. 015 51262... ● - 510 51262... In holder with base Ident. No. - ● 515 51262... In metal case Ident. No. - ● GEDORE = Prod. Gr. 558 ORION = Prod. Gr. 593

Grooving chisels

Execution: . Tempered impact head . Painted sha

Length (mm) 150 150 150 Width of cutting edge (mm) 2 3 4 Shank width x shank thickness 12 x 12 mm 12 x 12 mm 12 x 12 mm Chrome-vanadium Chrome-vanadium Chrome-vanadium Material steel steel steel Ident. No. 500 510 520 51263... ● ● ● Prod. Gr. 593 Mason’s chisels

Execution: Technical data: . Tempered impact head . Material: Chrome-vanadium steel . Painted sha

Length (mm) 200 300 400 500 Width of cutting edge (mm) 24 26 26 30 Shank width x shank thickness 16 x 16 mm 18 x 18 mm 18 x 18 mm 20 x 20 mm Ident. No. 500 520 530 540 51264... ● ● ● ● Prod. Gr. 593 Slitting or bodywork chisels

Execution: . Tempered impact head . Flat-oval sha , painted Length (mm) 240 Width of cutting edge (mm) 26 Shank width x shank thickness 26 x 7 mm Material Chrome-vanadium steel Ident. No. 500 51266... ● Prod. Gr. 593

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1469 Availability subject to country specific rules and regulations.

1468_EN_2018_KERN[21855126]-v.indd 1469 12/17/2018 3:36:38 PM Hand tools \ Striking tools

Parting chisel

Execution: . Tempered impact head . Painted sha Length (mm) 125 125 Width of cutting edge (mm) 10 12 Shank width x shank thickness 10 x 10 mm 12 x 12 mm Material Chrome-vanadium steel Chrome-vanadium steel Ident. No. 500 510 51267... ● ● Prod. Gr. 593 Electrician’s chisel

Execution: Technical data: . Tempered impact head . Material: Chrome-vanadium steel . Painted sha

Length (mm) 200 250 250 250 Width of cutting edge (mm) 10 10 12 14 Shank width x shank thickness 8 x 8 mm 8 x 8 mm 10 x 10 mm 12 x 12 mm Ident. No. 500 530 540 550 51268... ● ● ● ● Prod. Gr. 593

Dri punch ( DIN 6458 ) Made of chromium-vanadium steel, hardened

Execution: Technical data: . Tempered impact head . Length: 120 mm . Drive cone or drive point, bare . Material: Chrome-vanadium steel . Painted sha No. 51280

No. 51281 Tip Ø (mm) 2 3 4 5 6 8 10 1 7 Sha Ø (mm) 10 10 10 10 12 12 12 10 12 020 030 040 050 060 080 100 51280... Ident. No. ● ● ● ● ● ● ● - - Ident. No. 510 520 530 540 550 570 580 500 560 51281... ● ● ● ● ● ● ● ● ● GEDORE = Prod. Gr. 558 ORION = Prod. Gr. 593

Dri punch sets Made of chromium-vanadium steel, hardened

Execution: . Tempered impact head Technical data: . Drive cone or drive point, bare . Length: 120 mm . Painted sha . Sha diameter: 10 mm . Tip diameter: 1/2/3/4/5 mm

No. 51280 No. 51282 500 No. 51282 510

In holder with In metal case base In metal case 51280... 51282... 51282... Ident. No. Ident. No. Ident. No. 195 ● 500 ● 510 ● GEDORE = Prod. Gr. 558 ORION = Prod. Gr. 593

Source: Hahn+Kolb Werkzeuge GmbH 1470Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1470_EN_2018_KERN[21855129]-v.indd 1470 12/17/2018 3:36:36 PM Hand tools \ Striking tools

Pin punches ( DIN 6450 )

Application: . Drive cone or drive point, bare For driving split pins and studs out of clearance . Painted sha holes. No. 51280 Technical data: Execution: . Length: 150 mm . Tempered impact head . Material: Chrome-vanadium steel No. 51283 Tip Ø (mm) 2 3 4 5 6 7 8 Shank width x shank thickness 10 x 10 mm 10 x 10 mm 10 x 10 mm 10 x 10 mm 10 x 10 mm 12 x 12 mm 12 x 12 mm 220 230 240 250 260 270 280 51280... Ident. No. ● ● ● ● ● ● ● Ident. No. 500 520 540 560 570 580 590 51283... ● ● ● ● ● ● ● Tip Ø (mm) 10 2.5 3.5 4.5 12 Shank width x shank thickness 12 x 12 mm 10 x 10 mm 10 x 10 mm 10 x 10 mm 12 x 12 mm 310 51280... Ident. No. ● - - - - 595 510 530 550 597 51283... Ident. No. ● ● ● ● ● GEDORE = Prod. Gr. 558 ORION = Prod. Gr. 593

Pin punch sets

Application: . Drive cone or drive point, bare For driving split pins and studs out of clearance holes. . Painted sha . Tip diameter: 3/4/5/6/7/8 mm Execution: . Chrome-vanadium steel, tempered Technical data: . Tempered impact head . Length: 150 mm

No. 51280 No. 51284 500 No. 51284 520

In metal case In holder with base In metal case Composition of set 51280... 51284... 51284... Ident. No. Ident. No. Ident. No. Supplied sha cross-sections: 6 x 6 mm/8 x 2 mm 395 ● - - - - Supplied sha cross-sections: 10-12 mm - - 500 ● 520 ● GEDORE = Prod. Gr. 558 ORION = Prod. Gr. 593

Pin punch set

Application: . Safety impact head For driving split pins and studs out of clearance . Colour powder coating holes. . Tip diameter: 3/4/5/6/8/10 mm Execution: Advantage: . High-alloy tool steel, fully chrome-plated . Rounded strike edge; no damage to workpiece . High hardness level above 59 HRC for longer service life Delivery: In metal case Supplied sha cross-sections: Composition of set 10-12 mm Length (mm) 150 In metal case Ident. No. 500 51280... ● Prod. Gr. 522

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1471 Availability subject to country specific rules and regulations.

1470_EN_2018_KERN[21855129]-v.indd 1471 12/17/2018 3:36:41 PM Hand tools \ Striking tools

Pin punches ( DIN 6450 ) With guide sleeve, knurled, impact piece made of silver steel, zinc-chromated

Application: Technical data: For driving split pins and studs out of clearance . Material: Chrome-vanadium steel holes.

Execution: . Hardened drive point . Impact piece with guide sleeve

Tip Ø (mm) 0.9 1.4 1.8 2.4 2.8 3.4 3.9 5.9 Length (mm) 80 84 88 92 96 98 100 102 Shank width x shank thickness 6 x 6 mm 6 x 6 mm 6 x 6 mm 8 x 2 mm 8 x 2 mm 8 x 2 mm 8 x 2 mm 8 x 2 mm Ident. No. 009 014 018 024 028 034 039 059 51287... ● ● ● ● ● ● ● ● Prod. Gr. 522

Pin punch set With guide sleeve, knurled, impact piece made of silver steel, zinc-chromated

Application: . Tip diameter: 0.9/1.4/1.8/2.4/2.8/3.4/3.9/5.9 For driving split pins and studs out of clearance mm holes. . Pin punch lengths: 80-102 mm Execution: Delivery: . Chrome-vanadium steel, hardened drive point In steel metal case Supplied sha cross-sections: Composition of set 6-8 mm Number of pieces in assortment/set 8 With steel sheet metal box Ident. No. 010 51285... ● Prod. Gr. 522

Centre punch

Execution: Technical data: . Tempered impact head . Material: Chrome-vanadium steel . Bare tip No. 51295 . Painted sha

No. 51296

Length (mm) 120 100 120 150 Shank width x shank thickness 10 x 10 mm 8 x 8 mm 12 x 12 mm 12 x 12 mm 010 51295... Ident. No. ● - - - 500 490 510 520 51296... Ident. No. ● ● ● ● GEDORE = Prod. Gr. 558 ORION = Prod. Gr. 593

Centre punch with cemented carbide tip

Execution: Technical data: . With cemented carbide tip and octagonal sha . Length: 120 mm . Nickel-plated . Material: Chrome molybdenum

Shank width x shank thickness 10 x 10 mm 12 x 12 mm Ident. No. 010 020 51297... ● ● Prod. Gr. 558

Source: Hahn+Kolb Werkzeuge GmbH 1472Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1472_EN_2018_KERN[21855151]-t.indd 1472 12/17/2018 3:36:33 PM Hand tools \ Striking tools

Set of adjustable centre punches

Application: Advantage: For punching using samples or gauges without the . For precise punching on workpieces with no need for inconvenient marking misalignment . Even alignment of the slotted centring sleeve on Execution: the sample workpiece or in the drilling template . Special tool steel, hardened using knurled screws . End-to-end centre punch stud, can be ground . Adjustable lengths: 95-115 mm . Diameter: 6-16 mm Delivery: 3 items in case

Ident. No. 100 51308... ● Prod. Gr. 522

Scribers

Execution: . With straight tip . CrV steel, hardened . Knurled handle . One-piece construction

Length (mm) 180 Sha Ø (mm) 6 Ident. No. 010 51310... ● Prod. Gr. 523

Carbide scriber

Execution: . With carbide needle . With ﬁ bre glass-reinforced sha and protective cap Length (mm) 145 Ø of needle (mm) 2 Sha Ø (mm) 7 Ident. No. 010 51312... ● Prod. Gr. 523

Scriber with straight and bent tip

Execution: . With straight and bent tip . CrV steel, hardened . Knurled handle . One-piece construction Length (mm) 160 Sha Ø (mm) 5 Ident. No. 500 51315... ● Prod. Gr. 523

Cemented carbide scriber With replaceable cemented carbide needle and attachment clip

Execution: . Shatterproof plastic housing . Can be ground and replaced . Non-slip grip zone . Retractable pencil system . No. 51331: No. 51330 . No. 51330: . Nickel-plated metal housing with attachment clip . Knurled handle

No. 51331

Length (mm) 150 146 Ø of needle (mm) 2 2 Ident. No. 500 51330... ● - Ident. No. - 500 51331... ● Prod. Gr. 523

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1473 Availability subject to country specific rules and regulations.

1472_EN_2018_KERN[21855151]-t.indd 1473 12/17/2018 3:36:36 PM Hand tools \ Scribers

Scribers with replaceable cemented carbide marker and attachment clip

Execution: . Ident. No. 030–040: . Ident. No. 010: . Robust aluminium housing . Replaceable . Non-slip plastic grip zone . Metal housing . Ident. No. 040: Working length 25 mm, simple to snap oﬀ and push out . With attachment clip instead of grind . Ident. No. 030: Can be ground and replaced

Ident. No. 010 Ident. No. 030 Ident. No. 040

Length (mm) 165 150 150 Ø of needle (mm) 1.5 2 0.38 Ident. No. 010 030 040 51336... ● ● ● Prod. Gr. 523 Accessories for 51336 010 51336 030 51336 040 51337... RICO MARKER Ident. No. 010 replacement leads ● - - Ident. No. 020 040 51337... Replacement needles - ● ● Metal markers

Application: . Permanent coverage Ideal for high-contrast marking of metals with rolled, . Light-resistant dark or slightly rusted surfaces. . Fast-drying Execution: Advantage: . Marks in white . Easy to remove with organic solvents such as . Super-ﬁ ne marking width of approx. 0.8 mm washing solvent or toluol . Can also be used on a range of other materials

Ident. No. 010 51335... ● Prod. Gr. 523 HSS bimetal bow saw spare blades Flexible, high-performance saw blade serrated on one side

Application: Advantage: For universal sawing tasks including on rustproof . Completely shatterproof sheet steel. . Particularly high cutting capacity owing to opti- mally hardened HSS teeth area Execution: . Elastic blade body made from tool steel Technical data: . Long service life and excellent heat resistance . Saw blade length: 300 mm

Number of teeth per inch 18 24 32 Ident. No. 590 600 610 51648... ● ● ● Prod. Gr. 596 Aluminium hacksaw

Execution: Advantage: . Die-cast aluminium . So , ergonomic rubber handles ensure fatigue-free . Weighs only 650 g working . Captive pins hold the blade . Quick-action clamping in grip Suitable for sawblade length (mm) 300 Ident. No. 020 51849... ● Prod. Gr. 528 Metal saw bow

Execution: Advantage: . Bow made from strong rectangular tube, . Blade can be adjusted eight ways chrome-plated . Quick-action clamping in grip . Aluminium grip, blue, powder-coated Suitable for sawblade length (mm) 300 Ident. No. 020 51848... ● Prod. Gr. 528

Source: Hahn+Kolb Werkzeuge GmbH 1474Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1474_EN_2018_KERN[21855190]-z.indd 1474 12/17/2018 3:36:39 PM Hand tools \ Hand saws, ﬁ rmer chisels

ERGO metal saw bow

Execution: . Comfortable, non-slip handle for secure grip and . Alternative blade clamping at 55° for ﬂ ush cuts safe handling . Includes bimetal blade . Ident. No. 510: . Ident. No. 500: . Ergonomic version with extremely high blade . Clamping mechanism integrated in the handle clamping for straight, clean cuts and precise . Lightweight yet sturdy thanks to 2-component saw kerfs frame with steel core . Centred blade for correct balance . Spring-tensioned blade fastening enables quick Ident. No. 500 changeover of blades

Ident. No. 510 Saw blade length (mm) 300 Light Ident. No. 500 51849... ● Professional Ident. No. 510 51849... ● Prod. Gr. 519

SANDFLEX bimetal bow saw spare blades

Application: Advantage: For sawing all kinds of metal. . Considerably longer service life and longer tooth sharpness than standard hacksaw blades Execution: . Virtually indestructible and shatterproof bi-metal Technical data: blade . Saw blade length: 300 mm . Precision-ground teeth . Ident. No. 630: With progressive teeth Number of teeth per inch 18 24 32 - Ident. No. 600 610 620 630 51849... ● ● ● ● Prod. Gr. 519 Metal saw bow

Execution: . Wing clamping nut . Solid steel bracket . Wooden handle

Suitable for sawblade length (mm) 300 Ident. No. 500 51845... ● Prod. Gr. 529 Metal saw bow

Execution: Advantage: . Bow made from rectangular pipe . Blade can be adjusted by 90° . Handle silver powder-coated, pipe chrome-plated. . With wing clamping nut.

Suitable for sawblade length (mm) 300 Tension force (N) 100 Ident. No. 500 51846... ● Prod. Gr. 529 Mini saw with saw blade For bow saw spare blades up to 300 mm long

Application: Execution: For sawing in hard-to-reach places. . Includes bi-metal blade Delivery: Saw blade length (mm) 250 With SANDFLEX bimetal saw blade Ident. No. 020 51847... ● Prod. Gr. 519

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1475 Availability subject to country specific rules and regulations.

1474_EN_2018_KERN[21855190]-z.indd 1475 12/17/2018 3:36:44 PM Hand tools \ Hand saws, ﬁ rmer chisels

Fretsaw With steel pipe frame and spring chuck

Execution: . With steel tubular frame and spring chuck

Bracket Ø (mm) 13 Cutting depth (mm) 320 Ident. No. 010 57642... ● Prod. Gr. 529

Fretsaw blades For metal

Application: Technical data: For precise tasks on all kinds of metal. . Saw blade length: 130 mm Execution: . Fine toothing . Packaged by the dozen

Width (mm) 0.48 0.52 0.56 0.60 0.70 0.75 0.80 0.85 0.94 Thickness (mm) 0.24 0.26 0.28 0.30 0.34 0.36 0.38 0.40 0.44 Number of teeth per inch 61 66 46 46 41 41 33 33 28 Ident. No. 003 005 007 010 020 030 040 050 070 57644... ● ● ● ● ● ● ● ● ● Prod. Gr. 528

Hacksaws For wood

Execution: Advantage: . Ident. No. 005–010: . Ident. No. 005–010: . Made from high-grade Swedish steel . Quick sawing processes thanks to three precise, . Handle with 45° and 90° stop ground cutting levels . Ident. No. 007: Finer teeth for particularly clean . Induction hardening of the teeth tips guarantees edges a particularly long service life . Ident. No. 110: . Ident. No. 110: Ident. No. 005–010 . 1 250-mm universal pit saw blade for wood . So handle with three saw blades for changeover . 1 metal saw blade, 150 mm without the need for tools . 1 compass saw blade, 200 mm, for wood and . The handle can be adjusted to any position for plastic optimum force application

Saw blade length (mm) 380 380 450 250 Number of teeth per inch 7 11 7 - Ident. No. 005 007 010 110 Ident. No. 110 57660... ● ● ● ● Prod. Gr. 529

MORE THAN 60,000 PRODUCTS FOR MAXIMUM INNOVATION.

WE HAVE WHAT IT TAKES.

For a complete range of products that meet the toughest demands, visit www.iconridge.com

Source: Hahn+Kolb Werkzeuge GmbH 1476Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1474_EN_2018_KERN[21855190]-z.indd 1476 12/17/2018 3:36:45 PM Hand tools \ Hand saws, ﬁ rmer chisels

ERGO-SUPERIOR ripsaws and Proﬁ Cut Japanese trim saws

Application: . Japan pit saw with teeth on both sides Ident. No. 200: For fi ne and medium-coarse wood . Extra-fi ne toothing on one side of the blade Ident. No. 210: For medium-coarse wood . Progressive, coarse toothing on the other side Ident. No. 220: For optimum fl exibility . 2-C handle Ident. No. 230: For universal use, e.g. including fi ne cross-cuts and angular cuts . Ident. No. 230: . With hardened teeth tips Execution: . Teeth ground on three sides . Extremely narrow saw kerf of just 0.9 mm . Ident. No. 200–210: . With unique XT toothing Advantage: . Bolted 2-C handle . Ident. No. 200–210: Hardened teeth tips for long-lasting sharpness . Ident. No. 220: . Ident. No. 220–230: Flexible blade even allows fl ush sawing

Ident. No. 220

Ident. No. 200–210 Ident. No. 230

Saw blade length (mm) 400 435 240 305 Number of teeth per inch 11/12 9/10 6-8.5/17 13.5 Ident. No. 200 210 220 230 57660... ● ● ● ● Prod. Gr. 519

Bailey ﬁ rmer chisel

Execution: . Blades forged from hardened steel . Bevelled edges; can be ground along the entire length . Painted ash grip with impact ring

Width of cutting edge (mm) 8 10 12 15 20 30 Blade length (mm) 132 132 132 140 150 160 Ident. No. 108 110 112 115 120 130 57661... ● ● ● ● ● ● Prod. Gr. 566

Bailey ﬁ rmer chisel set 5-piece

Execution: . 5-part set . Blades forged from hardened steel . Bevelled-edge chisel lengths: 220-240 mm . Bevelled edges can be ground along the entire . Blade widths: 6, 10, 15, 20, 25 mm length . Painted ash grip with impact ring Delivery: In high-quality wooden box Number of pieces in assortment/set 5 Ident. No. 010 57661... ● Prod. Gr. 566

Knives with snap-oﬀ blades

Execution: Advantage: . Ident. No. 010: With pushbutton mechanism and . Extremely robust and smooth-running thanks to auto-lock mechanism stainless steel blade guide Ident. No. 010 . Ident. No. 020: locking wheel . Ergonomically shaped full-metal housing

Length (mm) 150 157 Width of knife blade (mm) 9 18 Ident. No. 010 020 53640... Price/unit, € ● ● Ident. No. 020 Prod. Gr. 582

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1477 Availability subject to country specific rules and regulations. Hand tools \ Cutters

Folding knives with blades

Execution: . Padded thumb area for highly precise cutting . For all standard trapezoidal blades pressure . With steel belt clip . Quick-action lever ensures quick changeover of blades without tools Advantage: . Blade compartment integrated in the handle with 5 . Ergonomically shaped aluminium handle spare blades . Reliable locking of blade when folded out Length (mm) 160 Width of knife blade (mm) 18.7 Ident. No. 200 53644... ● Prod. Gr. 597

Safety knife Made in Solingen

Execution: . covered blade protects goods and people . Ident. No. 100: . blade can be used on 4 sides by reversing and turning the blade . multi-talented: versatile, convenient and extremely safe . integrated metal tab for easy insertion in adhesive tape on cardboard boxes . ergonomically shaped with comfortable so grip . Ident. No. 120: . covered blade without sharp blade tip . disposable, highly versatile safety knife . eff ortless cutting of up to 2-layer cardboard boxes, fi lms and plastic . cut, scrape and slit without needing a second knife strapping Delivery: . Ident. No. 110: replacement blade in handle . integrated plastic spring simplifi es the cutting of thin materials such as fi lms Ident. No. 100: and paper webs

Ident. No. 100 Ident. No. 120 Ident. No. 110

SECUMAX Model SECUMAX 350 EASYSAFE SECUMAX 145 Length (mm) 154 207 148 Ident. No. 100 110 120 53641... ● ● ● Prod. Gr. 5KM Accessories for 53641 100 53641 110 53641... replacement blades, Ident. No. 400 410 pack of 10 ● ●

Safety knife Made in Solingen

Execution: . aluminium body with ergonomic so grip insert . Ident. No. 130: . preset cutting angle relieves the wrist . 0utstanding ergonomics, long lever, long blade . blade can be used 4x - simply twist and turn . Robust aluminium body, optimum weight distribution, so grip on knife back . Ident. No. 150: . patented fully automatic blade retraction . 3-sided slider for pleasant and absolutely variable handling . Ident. No. 140: . large blade outlet with fully automatic blade retraction . double lock knife with fully automatic blade retraction . metal abrasion protection on blade slit for heavy-duty use . special rounded trapezoidal blade can be used 2x

Ident. No. 130 Ident. No. 140 Ident. No. 150

SECUPRO SECUPRO Model SECUPRO 625 MARTEGO MAXISAFE Length (mm) 154 155 148 Ident. No. 130 140 150 53641... ● ● ● Prod. Gr. 5KM Accessories for 53641 130 53641 140 53641 150 53641... replacement blades, Ident. No. 420 430 440 pack of 10 ● ● ●

Source: Hahn+Kolb Werkzeuge GmbH 1478Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1477_EN_2018_KERN[21855196]-v.indd 1478 12/17/2018 3:36:48 PM Hand tools \ Cutters

Safety knife Made in Solingen

Execution: . Ident. No. 180: . Ident. No. 160: . double lock knife with eff ortless blade release lever . the world’s fi rst safety knife with over 4-cm blade outlet and automatic blade . plastic body with fi bre glass core for high levels of stability and long service retraction life . particularly robust and abrasion-resistant metal blade guide . Simple, tool-free blade change, trapezoidal blade can be used 2x . tool-free blade change with practical change button . ergonomically shaped for right and le handers . ergonomic handle made from high-quality plastic with pleasant so grip . Ident. No. 190: . Ident. No. 170: . ergonomic handle with two-sided, ribbed slider . professional cutters for all materials and cutting types . tool-free blade change and 4x usable blade. . 25-mm long blade outlet. automatic blade retraction . small and handy with automatic blade retraction . robust aluminium body with plastic insert

Ident. No. 160 Ident. No. 170 Ident. No. 180 Ident. No. 190

SECUNORM SECUNORM SECUNORM SECUNORM Model 380 PROFI125 MIZAR 175 Length (mm) 171 143 139 110 Ident. No. 160 170 180 190 53641... ● ● ● ● Prod. Gr. 5KM Accessories for 53641 160 53641 170 53641 180 53641 190 53641... replacement blades, Ident. No. 450 440 460 410 pack of 10 ● ● ● ●

Knives with snap-oﬀ blades

Execution: Advantage: . Extremely robust with smooth motion . Ident. No. 010–015, 125: Ergonomically shaped plastic housing . Ident. No. 010–015, 125: With push-button mechanism and auto-lock . Ident. No. 110: mechanism . Plastic housing with rubber inlay on handle . Ident. No. 110: With locking wheel . With packaging opener

Ident. No. 010 Ident. No. 015 Ident. No. 110 Ident. No. 125 Length (mm) 145 147 155 156 Width of knife blade (mm) 9 9 18 18 010 110 - 53644... Ident. No. ● - ● Ident. No. - 015 125 53644... ● - ● Prod. Gr. 566 Accessories for 53644 010 53644 110 53644... Spare ExcelBlack Ident. No. 011 111 snap-oﬀ blades, ultra-sharp ● ●

Universal utility knife

Execution: Technical data: . Die-cast zinc housing, lightweight and resistant to . Length: 150 mm corrosion . Width of knife blade: 18.7 mm . Includes 3 spare blades

Universal knife Ident. No. 010 53646... ● Prod. Gr. 566 Accessories for 53646 010 53646... Spare blades, pack of Ident. No. 205 10 Straight trapezoidal blades ● 53646... Spare blades, pack of Ident. No. 215 10 Hooked blade ●

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1479 Availability subject to country specific rules and regulations.

1479_EN_2018_KERN[21855199]-x.indd 1479 12/17/2018 3:36:44 PM Hand tools \ Cutters

Knives with snap-oﬀ blades

Execution: . With retractable blade (8 cutting edges) . Die-cast metal body for excellent stability and light weight Advantage: . Simple to change blades without the need for tools . Feed secured against unintentional adjustment Length (mm) 135 165 Width of knife blade (mm) 9 18 Ident. No. 005 010 53648... ● ● Prod. Gr. 566 Utility knife with trapezoidal blades

Execution: . Ident. No. 700: . Die-cast housing . Ergonomic handle with so component . Ident. No. 500: . Blades are changed without needing to screw them on . With retractable blade . Mechanically adjustable blade Technical data: . Width of knife blade: 18.7 mm Advantage: . Ident. No. 600–700: Safe working processes thanks to automatic blade retraction

Ident. No. 600 Ident. No. 500 Ident. No. 700

Length (mm) 150 160 162 Ident. No. 500 600 700 53642... ● ● ● Prod. Gr. 598 Accessories for 53642 500 53642 600 53642 700 53642... Trapezoidal blades, Ident. No. 610 610 610 pack of 10 ● ● ● Knives with snap-oﬀ blades

Execution: . Ident. No. 100–110, 510: Includes 2 spare blades in housing . With mechanical blade catch . Ident. No. 500–510: Plastic housing . Ident. No. 100–110: . Die-cast zinc housing Advantage: . Stainless steel blade guide . Ident. No. 100: With protective cap on tip . Ident. No. 110: Ergonomic design with rubber handle

Ident. No. 100 Ident. No. 500 Ident. No. 110 Ident. No. 510

Length (mm) 145 165 140 160 Width of knife blade (mm) 9 18 9 18 Ident. No. 100 110 500 510 53643... ● ● ● ● Prod. Gr. 598 Accessories for 53643 100 53643 110 53643 500 53643 510 53643... Spare blades, pack of Ident. No. 600 610 600 610 10 Snap-oﬀ ● ● ● ●

Folding utility knife

Execution: Advantage: . For all standard trapezoidal blades . Reliable locking of blade when folded out . With belt clip . Padded thumb area for highly precise cutting . Comfortable plastic handle pressure . Blade compartment integrated into the handle with . Quick-action lever ensures quick changeover of 5 spare blades blades without tools Length (mm) 160 Width of knife blade (mm) 18.7 Ident. No. 010 53645... ● Prod. Gr. 552

Source: Hahn+Kolb Werkzeuge GmbH 1480Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1479_EN_2018_KERN[21855199]-x.indd 1480 12/17/2018 3:36:47 PM Hand tools \ Cutters

TIN-coated utility knife blades

Execution: Advantage: . Ident. No. 001: Blade sizes: 18.7 x 61 mm . Blade coated with TiN for extremely long service . Ident. No. 001, 018: Thickness: 0.65 mm life Ident. No. 009 . Ident. No. 009: Thickness: 0.5 mm . Safe range of use: up to approx. 300°C Delivery: 10 pieces

Width of knife blade (mm) 18.7 9 18 Ident. No. 018 Trapezoidal Ident. No. 001 53641... blade ● - - Snap-oﬀ blade Ident. No. - 009 018 53641... ● ● Prod. Gr. 566

Knife holster

Execution: Advantage: . With heavy-duty belt clip . Strong, cut-proof polyester for a long service life . Cut-proof and friction-resistant insides . Small additional pocket for spare blades . Stable, robust seams . Suitable for all commercially available cutter knives

Material PES - Polyester Ident. No. 100 53646... ● Prod. Gr. 566

WEDO safety utility knife TÜV/GS-approved safety

Execution: . the spring-loaded blade immediately retracts as soon as it leaves the product . automatic blade retraction . even with the blade slider pushed forward . Ident. No. 010: . concealed circular blade on back for safely . handle body made from ABS plastic with dimpled rubber layer . for cutting ﬁ lms, cords, plastic strapping etc. . spring-loaded blade automatically disappears into the handle if . additional metal tab for slitting package tapes . the knife slips from the product. . ergonomic metal handle with rubberised grip . Ident. No. 010–020: easy tool-free blade change . Ident. No. 040: . combines the functions of a classic cutter and a . Ident. No. 020: . safety cutter in one tool . ergonomically shaped metal handle with rubberised handle area . adjustable blade with optional automatic retraction or . extra long blade outlet . conventional locking using automatic latch system. . Ident. No. 030:

Ident. No. 010 Ident. No. 040 Ident. No. 030

Ident. No. 020

Length (mm) 145 173 188 186 Width of knife blade (mm) 18 19 19 18 Ident. No. 010 020 030 040 53639... ● ● ● ● Prod. Gr. 566 Accessories for 53639 010 53639 020 53639 030 53639 040 53639... spare blades, pack of 10 straight trapezoidal blades, Ident. No. 110 120 120 - trapezoidal blade ● ● ● 53639... WEDO replacement Ident. No. 140 blades, pack of 10 snap-oﬀ , - - - ● snap-oﬀ blade

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1481 Availability subject to country specific rules and regulations.

1481_EN_2018_KERN[21855202]-r.indd 1481 12/17/2018 3:36:38 PM Hand tools \ Cutters

Scalpels

Application: . Fold-in blade For ﬁ ne and precise cutting tasks. . With locking mechanism . Includes 2 spare blades Execution: . Die-cast zinc housing Length (mm) 110 Width of knife blade (mm) 20 Ident. No. 010 53649... ● Prod. Gr. 566 Accessories for 53649 010 53649... Spare blades, pack of Ident. No. 100 50 ●

Scalpel

Application: Advantage: For highly precise cutting tasks. . Ident. No. 020: With rubber grip zone for fatigue- Ident. No. 010 free working Execution: . Pen-shaped precision blade Technical data: . includes 5 blades and plastic . Length: 150 mm Ident. No. 010: Ident. No. 020 protection cap . Width of knife blade: 10 mm . Ident. No. 020: Includes blade and plastic cap

Plastic handle with brass clamping sleeve Ident. No. 010 53650... ● Aluminium handle with aluminium clamping sleeve Ident. No. 020 53650... ● Prod. Gr. 566 Accessories for 53650 010 53650 020 53650... Spare blades, pack of Ident. No. 110 25 ● - Spare blades, pack of 53650... Ident. No. - 120 10 ●

Safety carton opener

Application: Advantage: For opening cardboard boxes, undoing packaging . Metal bow with internal blade protects the package straps and ﬁ lms, and for pulling out packaging contents from being damaged staples.

Execution: . High-quality, ergonomically shaped plastic handle . Replaceable blade Length (mm) 195 Width of knife blade (mm) 10 Ident. No. 010 53651... ● Prod. Gr. 566 Accessories for 53651 010 53651... Spare blades, pack of Ident. No. 100 10 ●

Plastic ﬁ lm cutter

Application: Advantage: For cutting close-ﬁ tting ﬁ lm without damaging the . Blade is easy to replace using snap-open material underneath. mechanism Execution: . Safety knife has one blade . Ergonomically shaped plastic handle

Length (mm) 160 Width of knife blade (mm) 10 Ident. No. 200 53651... ● Prod. Gr. 566 Accessories for 53651 200 53651... Spare blades, pack of Ident. No. 210 10 ●

Source: Hahn+Kolb Werkzeuge GmbH 1482Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1481_EN_2018_KERN[21855202]-r.indd 1482 12/17/2018 3:36:41 PM Hand tools \ Cutters

Glass scraper

Application: Execution: For removing paint and glue residue from glass, tiles, . Robust stainless steel holder doors etc. . The blade is easy to slide out and ﬁ x in position . Spare blades are easy to replace

Length (mm) 95 Width of knife blade (mm) 40 Ident. No. 010 53652... ● Prod. Gr. 566 Accessories for 53652 010 53652... Spare blades, pack of Ident. No. 100 10 ● Multi tool

Execution: . Stainless steel body . Ident. No. 120: . Stainless steel handles . Stainless steel body . With 17 tools and 2 bits . Aluminium alloy handle sections . Pliers, wire cutters, knives, serrated knives . Removable fastening clip . File for wood and metal . With 7 tools and 2 bits . Saws, scissors, awls, rulers . Pliers, wire cutters, combi blade, bit holders, karabiner/bottle opener . Bottle openers, bit holders, can openers, lanyard ring . With nylon belt holster . With nylon belt holster . Ident. No. 130: . Ident. No. 150: . Stainless steel body . Stainless steel body . Stainless steel handles . Stainless steel handles . With 19 tools . With 21 tools and 2 bits . Pliers, wire cutters, knives, serrated knives . Pliers, wire cutters, knives, serrated knives . Files, saws, slotted and cross-head blades . Blade changer, scissors, 3 ﬁ les, 2 bit holders . Awls, rulers, bottle openers, can openers, lanyard ring . Rulers, bottle openers, can openers, lanyard ring . With nylon belt holster . Saw, crimping pliers, stripping blade . Ident. No. 140: . With nylon belt holster

Ident. No. 120 Ident. No. 130 Ident. No. 140 Ident. No. 150 SKELETOOL SUPER TOOL WAVE SURGE

Model SKELETOOL SUPER TOOL WAVE SURGE Ident. No. 120 130 140 150 53656... ● ● ● ● Prod. Gr. 566 Pocket knifes The original

Execution: Advantage: . Folding-out functionality contained within a very small space . Robust and indestructible . Shell-type handles produced from impact-resistant plastic

Ident. No. 010 Ident. No. 020 Ident. No. 110 Ident. No. 130

Model Waiter Classic Spartan Handyman Number of functions 9 7 12 24 Length (mm) 84 58 91 91 Ident. No. 010 020 110 130 53655... ● ● ● ● Prod. Gr. 566

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1483 Availability subject to country specific rules and regulations.

1483_EN_2018_KERN[21855206]-s.indd 1483 12/17/2018 3:36:42 PM Hand tools \ Cutters

Punch shears

Application: . Ident. No. 810: For short, straight and shaped cuts. . Can also be used on copper, zinc and especially on V2A stainless steel sheet metal Execution: . PVC-dipped handles . Blade and handle forged from a single piece Advantage: . Maximum sheet metal thickness that can be cut: 1 Ident. No. 600–660 mm (600 N/mm2) . Ident. No. 810: HSS blades guarantee considerably longer service life, particularly for stainless . Ident. No. 600–660: steel sheets . Stainless steel blade inductively hardened . Can also be used on copper, zinc and, to a limited extent, on V2A stainless steel sheet metal Technical data: . Surface of the handle: Lacquered . Painted handles Ident. No. 810

Length (mm) 250 275 300 250 275 300 Right-hand Right-hand Right-hand Cutting direction cutting cutting cutting Le -hand cutting Le -hand cutting Le -hand cutting Material Stainless steel Ident. No. 600 605 610 650 655 660 53662... ● ● ● ● ● ● Special stainless Ident. No. - - 810 53662... steel ● - - - Prod. Gr. 552 Sheet metal shears

Application: . Painted handles For straight continuous and shaped cuts. . Maximum sheet metal thickness that can be cut: 1 mm (600 N/mm2) Execution: . Blade and handle forged from a single piece Technical data: . Stainless steel blade inductively hardened . Surface of the handle: Lacquered . Can also be used on copper, zinc and, to a limited extent, on V2A stainless steel sheet metal Length (mm) 260 280 260 280 Cutting direction Right-hand Right-hand Le -hand Le -hand cutting cutting cutting cutting Material Stainless Ident. No. 600 605 650 655 53664... steel ● ● ● ● Prod. Gr. 552 Pelican shears

Application: . Can also be used on copper, zinc and, to a limited For long, straight continuous cuts. extent, on V2A stainless steel sheet metal . Painted handles Execution: . Maximum sheet metal thickness that can be cut: 1 . Blade and handle forged from a single piece mm (600 N/mm2) . Stainless steel blade inductively hardened Length (mm) 300 350 Cutting direction Right-hand cutting Right-hand cutting Surface of the handle Lacquered Lacquered Material Stainless steel Ident. No. 600 605 53666... ● ● Prod. Gr. 552 Multisnip Longstyle aviation snips

Application: Advantage: For long, straight continuous cuts and large radii up . 25% less force required due to lever ratio to a material thickness of 1.2 mm. . With ergonomic two-component handles for a secure hold, even when high force is used Execution: . Optimised sheet metal processing reduces extent . Forged cutting head, sheet metal handles of workpiece warping . Extra-long and laterally stepped blade . Special blade geometry prevents the sheet from . Stainless steel blade inductively hardened slipping, even without serration . Maximum sheet metal thickness that can be cut: 12 mm (600 N/mm2) Length (mm) 280 Cutting direction Le -hand cutting Material of the grip handle 2-component plastic Material Stainless steel Ident. No. 010 53681... ● Prod. Gr. 552

Source: Hahn+Kolb Werkzeuge GmbH 1484Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1483_EN_2018_KERN[21855206]-s.indd 1484 12/17/2018 3:36:43 PM Hand tools \ Cutters

Compact sheet metal shears Double leverage transmission

Application: Advantage: For short, straight cuts and tight radii in standard . Extremely ﬂ exible and compact shears sheet metal up to 1.2-mm thickness. . Noticeably reduced force application thanks to double lever ratio Execution: . Practical catch/stopper combination . Ideal for tight radii . With ergonomic two-component handles for a . Forged cutting head, sheet metal handles secure hold, even when high force is used . Cutting edge length: 20 mm Ident. No. 010 . Stainless steel blade inductively hardened Technical data: . Maximum sheet metal thickness that can be cut: 1 . Length: 180 mm mm (600 N/mm2) . Material of the grip handle: 2-component plastic

Ident. No. 030

Cutting direction Right-hand cutting Le -hand cutting Material Stainless steel Ident. No. 010 030 53671... ● ● Prod. Gr. 552

Sheet metal shears Leverage transmission

Application: . Maximum sheet metal thickness that can be cut: For straight continuous and shaped cuts. 15 mm (600 N/mm2)

Execution: Advantage: . Forged cutting head . Micro-serrated blade for non-slip cutting . Painted handles . Drop-forged handles: especially robust for particu- Ident. No. 600–650 . Ident. No. 600–650: larly heavy-duty use . Stainless steel blade inductively hardened . Maximum sheet metal thickness that can be cut: Technical data: 12 mm (600 N/mm2) . Length: 240 mm . Surface of the handle: Lacquered . Ident. No. 700–750: . Special stainless steel blade inductively hardened Ident. No. 700–750

Cutting direction Right-hand cutting Le -hand cutting Material Stainless steel Ident. No. 600 650 53672... ● ● Special stainless steel Ident. No. 700 750 53672... ● ● Prod. Gr. 552

ARE YOU LOOKING FOR PRODUCTS THAT MEET THE TOUGHEST DEMANDS?

WE HAVE WHAT IT TAKES.

For a complete range of products that meet the toughest demands, visit www.iconridge.com

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1485 Availability subject to country specific rules and regulations.

1483_EN_2018_KERN[21855206]-s.indd 1485 12/17/2018 3:36:45 PM Hand tools \ Cutters

Sheet metal shears Leverage transmission

Application: . Ident. No. 710–760: For straight continuous and shaped cuts. . Compact cutting head for excellent manoeuvrability . Optimised lever ratio for 25% less force application Execution: . Optimised blade geometry prevents slippage, even without micro serration . Forged cutting head, sheet metal handles . ERGO handles for fatigue-free work . Maximum sheet metal thickness that can be cut: 12 mm (600 N/mm2) . Ident. No. 800–850: HSS blades guarantee considerably longer service life, particularly for stainless steel sheets Advantage: . Ident. No. 500–550: Micro-serrated blade for non-slip cutting Technical data: . Ident. No. 500–550, 800–850: . Length: 260 mm . Noticeably reduced force application thanks to double lever ratio . Material of the grip handle: 2-component plastic . With ergonomic two-component handles for a secure hold, even when high force is used

Ident. No. 550–760 Ident. No. 500 Ident. No. 800–850

Cutting direction Right-hand cutting Le -hand cutting Material Stainless steel Ident. No. 500 550 53674... ● ● Special stainless steel Ident. No. 710 760 53674... ● ● HSS Ident. No. 800 850 53674... ● ● Prod. Gr. 552

Aviation snips Leverage transmission

Application: . Noticeably reduced force application thanks to For straight continuous cuts. double lever ratio . Ident. No. 600–650: With ergonomic two-com- Execution: ponent handles for a secure hold, even when high . Forged cutting head, sheet metal handles force is used . Maximum sheet metal thickness that can be cut: . Ident. No. 710–760: ERGO handles for fatigue-free 2 12 mm (600 N/mm ) work Ident. No. 600–650 Advantage: Technical data: . Micro-serrated blade for non-slip cutting . Length: 260 mm . Material of the grip handle: 2-component plastic

Ident. No. 710–760

Cutting direction Right-hand cutting Le -hand cutting Material Stainless steel Ident. No. 600 650 53676... ● ● Special stainless steel Ident. No. 710 760 53676... ● ● Prod. Gr. 552

Ideal snips Leverage transmission

Application: . Micro-serrated blade for non-slip cutting For straight continuous and shaped cuts. . Noticeably reduced force application thanks to double lever ratio Execution: . With ergonomic two-component handles for a . Forged cutting head, sheet metal handles secure hold, even when high force is used . Stainless steel blade inductively hardened . Maximum sheet metal thickness that can be cut: Technical data: 12 mm (600 N/mm2) . Length: 210 mm . Material of the grip handle: 2-component plastic Advantage: . Especially ﬂ at cutting head allows cutting of very tight curves in hard-to-reach areas Cutting direction Right-hand cutting Le -hand cutting Ident. No. 600 650 53680... ● ● Prod. Gr. 552

Source: Hahn+Kolb Werkzeuge GmbH 1486Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1486_EN_2018_KERN[21855211]-u.indd 1486 12/17/2018 3:36:34 PM Hand tools \ Cutters

Proﬁ led ﬁ ne scraper

Execution: . Entire handle is made from extremely impact-re- . 3-edged hollow-section scraper sistant, tough plastic . Special tool steel blade . With protective cap for the cutters

Blade length (mm) 25 Width of knife blade (mm) 8 Material of the grip handle Plastic Ident. No. 500 53695... ● Prod. Gr. 596

MORE THAN 60,000 PRODUCTS FOR MAXIMUM INNOVATION.

WE HAVE WHAT IT TAKES.

For a complete range of products that meet the toughest demands, visit www.iconridge.com

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1487 Availability subject to country specific rules and regulations.

1486_EN_2018_KERN[21855211]-u.indd 1487 12/17/2018 3:36:36 PM Hand tools \ Cutters

Triangular hollow-ground scrapers

Execution: . Adjustable length . Nickel-plated and bright-polished holder . With straight, dual-end scraper blade . With screw head and rotating safety closure Blade length (mm) 80 Width of knife blade (mm) 5 Material of the grip handle Steel Ident. No. 010 53700... ● Prod. Gr. 6AE Accessories for 53700 010 Scraper blade straight Ident. No. 010 53701... ●

Triangular scraper

Application: Execution: For extremely precise work and for deburring a range . Vanadium-extra steel, polished of workpieces. . Encased all the way up to the tip . With hollow blade . With plastic handle and hand guard Blade length (mm) 80 Material of the grip handle Plastic Ident. No. 010 53704... ● Prod. Gr. 519

Scraper set 4-piece

Execution: Advantage: . Stainless steel blades . Non-slip plastic grip ﬁ ts perfectly in your hand . Can be ground . With stainless steel cap — indestructible . Blade widths: 20/32 mm . Blade length: 55/105 mm Material of the grip handle Plastic Ident. No. 500 53704... ● Prod. Gr. 598

Triangular hollow-ground scraper

Execution: Technical data: . Special tool steel . Material of the grip handle: Wood . Enamelled Ident. No. 075

Ident. No. 500–530

Blade length (mm) 65 100 125 150 200 Width of knife blade (mm) 6 12 12 14 16 Ident. No. 075 53705... ● - - - - Ident. No. - 500 510 520 530 53705... ● ● ● ● DICK = Prod. Gr. 6AE a = Prod. Gr. 596

Source: Hahn+Kolb Werkzeuge GmbH 1488Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1486_EN_2018_KERN[21855211]-u.indd 1488 12/17/2018 3:36:39 PM Hand tools \ Cutters

Triangular solid scrapers

Execution: Technical data: . Special tool steel . Material of the grip handle: Wood . Enamelled Triangular solid scraper Blade length (mm) 150 200 Width of knife blade (mm) 10 14 Ident. No. 510 520 53706... ● ● Prod. Gr. 596 Flat scrapers

Execution: Technical data: . Special tool steel . Material of the grip handle: Wood . Enamelled Flat scraper Blade length (mm) 100 150 200 Width of knife blade (mm) 18 20 20 Ident. No. 500 510 520 53710... ● ● ● Prod. Gr. 596 Flat scrapers

Execution: Technical data: . With soldered cemented carbide cutting insert . Material of the grip handle: Wood . Painted blade

Blade length (mm) 190 210 240 Width of knife blade (mm) 15 20 25 Ident. No. 210 270 320 53711... ● ● ● Prod. Gr. 550 Flat scraper with cemented carbide reversible tip Cemented carbide scraper tip

Execution: . The scraper plates are four-bladed, ground and . Galvanised blade holder lapped; they can also be used for electric hand . In plastic box with Allen key scrapers Advantage: Technical data: . With replaceable cemented carbide cutting insert . Material of the grip handle: Wood

Blade length (mm) 300 300 350 Width of knife blade (mm) 20 25 30 Ident. No. 010 020 030 53712... ● ● ● Prod. Gr. 550 Accessories for 53712 010 53712 020 53712 030 53713... Spare carbide index- Ident. No. 010 020 030 able insert ● ● ● Seal scraper

Application: Execution: For eff ortless removal of old seals, adhesive residues . High-alloy chrome-vanadium steel, forged, and labels on fl anges, cylinder heads, valve covers chrome-plated and other fl at surfaces. Advantage: . With ergonomic multi-component hexagonal handle in impact-resistant plastic

Blade length (mm) 150 Width of knife blade (mm) 25 Material of the grip handle 2-component plastic Ident. No. 010 53714... ● Prod. Gr. 550

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1489 Availability subject to country specific rules and regulations.

1489_EN_2018_KERN[21855215]-r.indd 1489 12/17/2018 3:36:32 PM Hand tools \ Cutters

Hooks & picks set 4-piece

Execution: Delivery: . 2-component handle In case . Shapes: Straight tip, 45° and 90° curved tip, curved tip for hooking Blade Ø (mm) 3.5 Blade length (mm) 75 Ident. No. 500 52843... ● Prod. Gr. 596

Electronics and telephone shears

Application: . Ident. No. 010: Special electronics scissors For cutting ﬁ ne wires and cables. . Ident. No. 020: Special electronics scissors, curved blade Execution: . Ident. No. 030: Electricians’ scissors with wire . Nickel-plated cutters Length (mm) 115 115 125 Version Straight Curved Straight Ident. No. 010–020 Ident. No. 010 020 030 Electronics snips 53717... ● ● ● Prod. Gr. 551

Ident. No. 030 Telephone snips

Goldsmith’s scissors

Application: Execution: For cutting ﬁ ne and so sheet metal. . Bare head . No. 53718 015: Scissor eyes coated with plastic

No. 53719 No. 53718 010

No. 53718 015

Length (mm) 180 180 180 Version Straight Scissor-style handles | Straight Curved Ident. No. 010 015 53718... ● ● - Ident. No. - - 010 53719... ● Prod. Gr. 551

Source: Hahn+Kolb Werkzeuge GmbH 1490Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1489_EN_2018_KERN[21855215]-r.indd 1490 12/17/2018 3:36:38 PM Hand tools \ Cutters

Work knives/ﬁ tter’s knives

Execution: . Rustproof blades and tools . Ident. No. 100–110: Blue plastic handle . Pocket knife with 6 fold-out tools . Ident. No. 100–115: Rustproof, ﬁ xed blade . Ident. No. 125: . Ident. No. 115: Beech wood handle . Fold-out and lockable rustproof blade . Handle with wooden insert . Ident. No. 120: . Includes leather belt pouch

Ident. No. 100 Ident. No. 115 Ident. No. 110 Ident. No. 125

Ident. No. 120

Length (mm) 180 270 290 120 220 Ident. No. 100 110 115 120 125 53719... ● ● ● ● ● Prod. Gr. 551

Precision scissors

Application: Execution: Ident. No. 001–002: For delicate, precise cutting tasks . Pointed Ident. No. 003: For highly precise cutting tasks . With extremely sharp cutting edge Ident. No. 004: For precise cutting in very tight radii . Nickel-plated surface

Ident. No. 003 Ident. No. 001–002 Outline scissors Ident. No. 004 Straight or bent Sticker scissors

Length (mm) 110 110 105 90 Version Straight Curved Straight Straight Ident. No. 001 002 003 004 53720... ● ● ● ● Prod. Gr. 551

Paper scissors and multi-purpose scissors

Execution: . Ident. No. 040: . Ident. No. 010–020: Nickel-plated . Stainless steel blade, non-rusting . Ident. No. 030: Rustproof blades . HRC 50-54 . Ident. No. 030–040: . Ident. No. 050: . Plastic handles . Blades rustproof, cannot be disassembled . For le -handed and right-handed users . Plastic handles, toothed recess

Ident. No. 010–020

Ident. No. 030 Ident. No. 040 Ident. No. 050

Length (mm) 150 200 250 205 Paper scissors Ident. No. 010 015 020 53720... ● ● ● - Multi-purpose scissors Ident. No. - - 040 030 53720... ● ● Universal cutters Ident. No. - - 050 53720... ● - Prod. Gr. 551

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1491 Availability subject to country specific rules and regulations.

1491_EN_2018_KERN[21855218]-t.indd 1491 12/17/2018 3:36:37 PM Hand tools \ Cutters

Industrial scissors

Execution: . Ident. No. 006, 020: Smooth cutting edges . Nickel-plated blade surface . Ident. No. 010: . Ident. No. 005: . Serrated cutting edges . Micro-serrated cutting edges . Can be taken apart . Rounded tips . With special screw . Ident. No. 006: . Lower cutting edge bevelled at the front Technical data: . Pointed top blade . Version: Straight

Ident. No. 006 Ident. No. 010 Ident. No. 020 Ident. No. 005

Length (mm) 105 175 210 250 Ident. No. 005 006 010 020 53721... ● ● ● ● Prod. Gr. 551

All-purpose shears

Application: Advantage: Ident. No. 500–550: For cutting leather, thin sheet metal, fabric materials, . Ident. No. 500–550: plastic, paper, cardboard, string, wires etc. . Ergonomically shaped plastic handles with so inlay and anti-slip protection Ident. No. 600: For cutting, sawing, ﬁ ling and screwdriving. . With practical one-handed lock . Ident. No. 600: Execution: . Stainless steel tools for a long service life . Ident. No. 500–550: Stainless steel cutters . Non-slip stainless steel handles with so foam inlays for safe working . Ident. No. 600: processes . Multi-tool with 7 options . Scissors, knives, saws, ﬁ les, cross-head, large and small slotted screwdrivers Delivery: Ident. No. 600: With practical robust nylon belt pouch

Ident. No. 500 Ident. No. 510 Ident. No. 550

Length (mm) 140 190 185 170 Version Straight Straight Oﬀ set Straight Ident. No. 600 Ident. No. 500 510 550 600 53722... ● ● ● ● Prod. Gr. 552

TOP all-purpose shears

Application: Advantage: For cutting sheet metal, so wire, iron bands, fabric, . Serrated cutting edges, making them particularly cardboard, plastic, paper, leather, ﬂ owers, branches, non-slip carpets, twine etc. . With safety lock Execution: . With ergonomic handles for safe and fatigue-free work . Especially robust . Rustproof stainless steel head . Screw joint prevented from coming loose

Length (mm) 180 Version Straight Ident. No. 010 53723... ● Prod. Gr. 598

Source: Hahn+Kolb Werkzeuge GmbH 1492Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1491_EN_2018_KERN[21855218]-t.indd 1492 12/17/2018 3:36:42 PM Hand tools \ Cutters

TOP all-purpose and electrician’s shears

Application: Advantage: For cutting cables, insulating material, cable ducts, . One blade has ﬁ ne teeth, one is smooth, thereby leather, cardboard etc. ensuring precise working on cables . Durable, robust two-component handle, non-slip Execution: and ergonomic . Stainless steel head . Screw joint prevented from coming loose

Length (mm) 140 Ident. No. 010 53724... ● Prod. Gr. 598

Fabric scissors

Application: . Bolted and adjustable joint For cutting hard-to-cut materials such as glass, . Ident. No. 001: Painted handles carbon ﬁ bre or aramide materials (Kevlar). . Ident. No. 002: PVC-dipped handles Execution: Technical data: . Precision-ground cutting edge . Version: Straight . Serrated on one side Ident. No. 001 Length (mm) 200 250 Ident. No. 001 002 53727... ● ● Prod. Gr. 551

Ident. No. 002

COMBINOX® all-purpose shears With straight blade

Application: Advantage: For so materials up to thin copper and aluminium . Ergonomic plastic handle with so inlay sheeting, not for steel and hardened or naturally . With wire guide for cutting binding wire hard materials. . Round guide on the stop for stripping cables from Execution: 1-1.5 mm in diameter . All metallic parts made from stainless steel . With practical one-handed lock . With opening spring

Length (mm) 190 Version Straight Ident. No. 010 53735... ● Prod. Gr. 552

Packer’s and multi-purpose shears Model CP, Swiss made

Application: . Handles made from pressed steel sheet with For accurate and precise cutting of packaging plastic coating straps, wires and steel tape up to 1.5 mm, as well as wood, paper, cardboard, leather, rubber and plastic. Advantage: . With practical one-handed lock Execution: . Knife and pin made from hardened high-quality steel Length (mm) 205 Polyvinyl Material of the grip handle chloride Ident. No. 010 53750... ● Prod. Gr. 546

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1493 Availability subject to country specific rules and regulations.

1493_EN_2018_KERN[21855221]-t.indd 1493 12/17/2018 3:36:34 PM Hand tools \ Cutters

Safety tin snips Leverage transmission

Application: Advantage: For safe cutting of steel and plastic strapping. . Ident. No. 200: Hold-down clamp prevents the packaging strap from springing up and causing a Execution: hazard . Ident. No. 200: Comfortable handle sleeves with . Ident. No. 510: Solid hold-down clamp prevents anti-slip protection the packaging strap from springing up and causing . Ident. No. 510: a hazard Ident. No. 200 . Special tool steel cutting head, forged, inductively hardened . With plastic handles

Ident. No. 510

Length (mm) 250 600 Knife insert length (mm) 25 50 Max. material thickness for steel (mm) 0.5 1.2 Ident. No. 200 510 53751... ● ● Prod. Gr. 597

Safety tin snips With lever action

Application: Advantage: For safe cutting of steel and plastic strapping. . GS-tested . 2-component handle with anti-slip protection for Execution: fatigue-free work . Drop-forged shear head . Lower section is ﬂ at to enable the shears to be . One-handed operation, self-opening spring action easily slid beneath the strap . Clamping device prevents the packaging strap from springing up and causing a hazard Length (mm) 260 Material of the grip handle 2-component plastic Knife insert length (mm) 32 Max. material thickness for steel (mm) 1.0 Ident. No. 020 53751... ● Prod. Gr. 552

Safety steel strap cutters

Application: Advantage: For safe cutting of steel and plastic strapping. . The rubber buﬀ ers ﬁ rmly hold the cut-out strip ends and thus prevent them from springing up suddenly Length (mm) 400 Material of the grip handle Plastic Knife insert length (mm) 32 Max. material thickness for steel (mm) 1.0 Ident. No. 015 53752... ● Prod. Gr. 551

Source: Hahn+Kolb Werkzeuge GmbH 1494Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1493_EN_2018_KERN[21855221]-t.indd 1494 12/17/2018 3:36:38 PM Hand tools \ Cutters

Manual lever snips

Application: Execution: Ident. No. 010–030: For cutting sheet metal, fl at and round steel (not suitable . Robust shear body made from tempered steel for stainless steel sheets). . Special tool steel blade, specially hardened and ground Ident. No. 040: For cutting sheet metal, fl at, round, square, L or T-shaped sectional steel (not suitable for stainless steel sheets). Advantage: . Lever arm with weight-equalising spring used as accident prevention . With infi nitely variable hold-down clamp for safe working processes

Ident. No. 010 Ident. No. 020 Ident. No. 030 Ident. No. 040 Model 2BR4 2BR6 3BR4 300 5RP 10 Surface of the handle Lacquered Lacquered Lacquered Lacquered Knife insert length (mm) 120 180 300 175 Max. material thickness for steel (mm) 4 6 4 14 Weight (kg) 8 18 25 105 010 020 030 040 Ident. No. + + 53790... ● ● ● ● Prod. Gr. 580 Accessories for 53790 010 53790 020 53790 030 53790 040 53790... Replacement upper Ident. No. 110 120 130 140 blade ● ● ● ● 53790... Replacement lower Ident. No. 210 220 230 240 bade ● ● ● ●

Mango II/B10 universal deburrer

Application: . High-quality, ergonomic handle with integrated For deburring straight edges, bore holes and slots. blade magazine . Includes 10x type B 10 blades Execution: . For steel, aluminium, copper and plastics . Mango II handle with safety lock (direct mounting) Suitable for blade type B Material of the grip handle 2-component plastic Ident. No. 005 53811... ● Prod. Gr. 554

Mango II set B universal deburrer

Application: . High-quality, ergonomic handle with integrated For deburring hard-to-reach areas such as in hollow blade magazine pieces or housing parts. . Includes one of each blade: type B 10 and B 20 . For steel, aluminium, copper, brass, cast iron and Execution: plastics . Mango II handle with tool holder B Suitable for blade type B Material of the grip handle 2-component plastic Ident. No. 016 53811... ● Prod. Gr. 554

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1495 Availability subject to country specific rules and regulations.

1495_EN_2018_KERN[21855224]-x.indd 1495 12/17/2018 3:36:35 PM Hand tools \ Manual deburring tools

Replacement blades, type B

Application: Ident. No. 065: For simultaneous deburring on the inside and outside of bore Ident. No. 020, 040, 081: For deburring steel, aluminium, copper and plastics holes in brass, cast iron and plastics up to a thickness of 4 mm Ident. No. 025, 042: For deburring steel, aluminium, copper, stainless steel and Ident. No. 075: For backwards deburring in hard-to-reach areas and in bore plastics holes up to 20 mm in depth Ident. No. 030: For deburring steel, aluminium, copper, hardened steel and plastics Execution: Ident. No. 035: For deburring cemented carbide, carbide and glass . Ident. No. 045–055, 065: For right-hand and le -hand use Ident. No. 045: For deburring brass, cast iron and plastics Advantage: Ident. No. 050–055: For deburring brass, cast iron, stainless steel and plastics . Ident. No. 025, 042, 050: Increased service life thanks to TiN coating Ident. No. 060: For simultaneous deburring on the inside and outside of bore . Ident. No. 081: Increased service life thanks to cobalt alloy holes in steel, aluminium, copper and plastics up to a thickness of 4 mm

Ident. No. 020 Ident. No. 025 B 10 B 10 TIN

Ident. No. 035 Ident. No. 030 B 10 D Ident. No. 040 Ident. No. 042 Ident. No. 045 B 12 B 12 TIN Ident. No. 050 B 10 C B 20 B 20 Tin

Ident. No. 075 B 60 Ident. No. 060 Ident. No. 065 Ident. No. 081 B 30 Ident. No. 055 B 32 B 10 S B 20 C

B 10 Type HSS B 10 TiN B 10 C B 10 D B 12 B 12 TiN B 20 B 20 TiN B 20 C B 30 B 32 B 60 B 10 S Blade Ø (mm) 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 Blade length (mm) 25 25 25 25 25 25 25 25 25 25 25 45 25 Cutting material HSS HSS VHM HSS HSS HSS HSS HSS VHM HSS HSS HSS HSS Ident. No. 020 025 030 035 040 042 045 050 055 060 065 075 081 53811... ● ● ● ● ● ● ● ● ● ● ● ● ● Prod. Gr. 554

TiN-coated replacement blade set B For universal deburrer set B

Application: Advantage: For universal deburring of a wide variety of shapes . Increased service life thanks to TiN coating and bore holes from 2 mm in diameter. Delivery: Execution: Includes 10 blades, two of each: B 10, B 11, B 12, B . For steel, aluminium, copper, stainless steel and 20, B 30 plastics Type B 10/B 11/B 12/B 20/B 30 TiN Blade Ø (mm) 2.6 Blade length (mm) 25 Cutting material HSS Ident. No. 085 53811... ● Prod. Gr. 554

Source: Hahn+Kolb Werkzeuge GmbH 1496Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1495_EN_2018_KERN[21855224]-x.indd 1496 12/17/2018 3:36:39 PM Hand tools \ Manual deburring tools

Tool holders

Application: Advantage: Ident. No. 090: For universal deburrer B . Ident. No. 090: Blades can be used in axial or Ident. No. 095: For deburring straight edges, bore radial direction Ident. No. 090 Holder B holes and slots . Ident. No. 095: Strong but light, with practical pocket clip and blade storage area Execution: . Shank diameter: 2.6 mm Technical data: . Suitable for blade type: B Ident. No. 095

Material of the grip handle Steel 2-component plastic Ident. No. 090 095 53811... ● ● Prod. Gr. 554

Ceramic deburring tool

Application: Execution: For deburring metal or plastic external edges and . High-quality ceramic blade, ﬁ rmly integrated surfaces. . Strong but lightweight GloBurr handle Suitable for blade type B Material of the grip handle 2-component plastic Ident. No. 100 53811... ● Prod. Gr. 554

Mango II set C universal deburrer

Execution: Advantage: . Mango II handle with tool holder C . Includes safety cap that is also used as a key to . Triangular scraper C 42 safely replace the blades Material of the grip handle 2-component plastic Ident. No. 116 53811... ● Prod. Gr. 554

Scrape Burr triangular scraper set

Application: Execution: For high-performance, multi-purpose and ﬁ ne . Set comprising individual scrapers, each with one C42 scraping. blade . Supplied blades: B10, C40, C42, E400 C40 . Can be used on straight edges, for inner machining of drill holes, ﬂ at surfaces and much more E400 Suitable for blade type Scrape Burr B10 Material of the grip handle 2-component plastic Ident. No. 130 53811... ● Prod. Gr. 554 Tool holder C

Execution: . With female thread Suitable for blade type C Material of the grip handle 2-component plastic Holder C Ident. No. 190 53811... ● Prod. Gr. 554

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1497 Availability subject to country specific rules and regulations.

1497_EN_2018_KERN[21855227]-s.indd 1497 12/17/2018 3:36:37 PM Hand tools \ Manual deburring tools

Mango II/E100 universal deburrer

Execution: . Includes 10x type E 100 blades . Mango II handle with safety lock (direct mounting) . For steel, aluminium, copper and plastics . High-quality, ergonomic handle with integrated blade magazine Suitable for blade type E Material of the grip handle 2-component plastic Ident. No. 300 53811... ● Prod. Gr. 554

Mango II set E universal deburrer

Execution: . Includes one of each blade: type E 100, E 200 and . Mango II handle with tool holder E E 300 . High-quality, ergonomic handle with integrated . For steel, aluminium, copper, brass, cast iron and blade magazine plastics Suitable for blade type E Material of the grip handle 2-component plastic Ident. No. 312 53811... ● Prod. Gr. 554 Mango II Basic E universal deburrer

Execution: . Includes one of each blade: type E 100, E 200 and . Mango II handle with adapter E E 300 . High-quality, ergonomic handle with integrated . For steel, aluminium, copper, brass, cast iron and blade magazine plastics Suitable for blade type E Material of the grip handle 2-component plastic Ident. No. 318 53811... ● Prod. Gr. 554 Spare blades For universal deburrer sets E and AE

Application: Ident. No. 385: For backwards deburring in hard-to-reach areas and in bore Ident. No. 320, 328–330: For deburring steel, aluminium, copper and plastics holes up to 40 mm in depth Ident. No. 325, 376: For deburring steel, aluminium, copper, stainless steel and Ident. No. 386: For deburring thick-walled holes in steel, aluminium, copper and plastics plastics Ident. No. 335: For deburring hardened steel and plastics Execution: Ident. No. 340: For deburring steel, aluminium, stainless steel and plastics . Ident. No. 325: Also for bore holes with minimum diameter of 2 mm Ident. No. 350–355: For deburring brass, cast iron and plastics . Ident. No. 328: Also for bore holes with minimum diameter of 15 mm Ident. No. 360: For deburring brass, cast iron, hardened steel and plastics . Ident. No. 330: For le -handed use Ident. No. 365: For simultaneous deburring on the inside and outside of bore holes in steel, aluminium, copper and plastics up to a thickness of 6 mm . Ident. No. 350–360, 370: For right-hand and le -hand use Ident. No. 370: For simultaneous deburring on the inside and outside of bore . Ident. No. 380–385: For steel, aluminium, copper and plastics holes in brass, cast iron and plastics up to a thickness of 6 mm Advantage: For backwards deburring in hard-to-reach areas and in bore Ident. No. 380: . Ident. No. 340, 355: Increased service life thanks to TiN coating holes up to 20 mm in depth . Ident. No. 376: Increased service life thanks to cobalt alloy

Ident. No. 325 Ident. No. 330 Ident. No. 320 Ident. No. 328 Ident. No. 335, 365 Ident. No. 340 E 100 E 111 E 200 C E 100 TiN

Ident. No. 385 E 601 Ident. No. 370 Ident. No. 376 Ident. No. 380 Ident. No. 350–355 Ident. No. 360 E 320 E 100 S E 600 E 200, 220 TiN E 250

Ident. No. 386 E700, 720

Source: Hahn+Kolb Werkzeuge GmbH 1498Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1497_EN_2018_KERN[21855227]-s.indd 1498 12/17/2018 3:36:42 PM Hand tools \ Manual deburring tools

E 100 E 100 E 200 E 200 Type E 100 E 110 E 111 E 100 L C TiN E 200 TiN C E 300 E 320 E 100 S E 600 E 601 E 700 Blade Ø (mm) 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 Blade length (mm) 48 48 48 48 48 48 48 48 48 48 48 48 62 98 98 Cutting material HSS HSS HSS HSS VHM HSS HSS HSS VHM HSS HSS HSS HSS HSS HSS Ident. No. 320 325 328 330 335 340 350 355 360 365 370 376 380 385 386 53811... ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Prod. Gr. 554

TiN-coated replacement blade set E For universal deburring tool set E and AE

Application: Advantage: For universal deburring of a wide variety of shapes . Increased service life thanks to TiN coating and bore holes from 15 mm in diameter. Delivery: Execution: Includes 10 blades, two of each: E 100, E 110, E 111, . For steel, aluminium, copper, stainless steel and E 200, E 300 plastics Type E 100/E 110/E 111/E 200/E 300 TiN Blade Ø (mm) 3.2 Blade length (mm) 48 Cutting material HSS Ident. No. 388 53811... ● Prod. Gr. 554 Tool holders

Application: Execution: Ident. No. 390: For universal deburrer E . Shank diameter: 3.2 mm Ident. No. 390 Ident. No. 395: For deburring straight edges, bore holes and slots Advantage: . Ident. No. 395: Strong but light, with practical pocket clip and blade storage area

Ident. No. 395

Suitable for blade type E E Material of the grip handle Steel 2-component plastic Ident. No. 390 395 53811... ● ● Prod. Gr. 554

Mango II universal deburrer sets F and FR

Execution: Advantage: . 90° countersink F 20 (up to max. 20-mm bore . Ident. No. 418: Integrated ratchet enables contin- hole) uous turning of the countersink . Ident. No. 412: Mango II handle with tool holder F Ident. No. 412 . Ident. No. 418: Mango II handle with tool holder FR Technical data: with ratchet . Material of the grip handle: 2-component plastic

Ident. No. 418

Suitable for blade type F FR Ident. No. 412 418 53811... ● ● Prod. Gr. 554

Mango II Burr-Ex deburrer set

Application: . Holder for all F blades For external deburring of pipes and cylinders up to . Includes F 26 X external deburrer 26 mm in outer diameter. Advantage: Execution: . Integrated ratchet enables continuous turning of . Mango II handle with tool holder FR the countersink . High-quality, ergonomic handle with integrated blade magazine

Suitable for blade type Burr Ex Material of the grip handle 2-component plastic Ident. No. 466 53811... ● Prod. Gr. 554

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1499 Availability subject to country specific rules and regulations.

1497_EN_2018_KERN[21855227]-s.indd 1499 12/17/2018 3:36:43 PM Hand tools \ Manual deburring tools

Tool holders with external thread

Execution: Advantage: . Ident. No. 490: For all F blades . Ident. No. 495: Integrated ratchet enables contin- Ident. No. 490 uous turning without re-positioning Holder F

Ident. No. 495 Holder FR

Suitable for blade type FR F Ident. No. 495 490 53811... ● ● Prod. Gr. 554

Mango II BURR-BI universal deburrer set

Application: . Holder for all R inserts For deburring sheet metal up to 14 mm in thickness. . Includes two R 10 indexable inserts and fastening key Execution: . For steel, aluminium, copper, brass, cast iron, . Mango II handle with tool holder R stainless steel and plastics . High-quality, ergonomic handle with integrated blade magazine Advantage: . With integrated hand guard for safe working Suitable for blade type Burr Bi Material of the grip handle 2-component plastic Ident. No. 606 53811... ● Prod. Gr. 554

Deburring tools Individual tools and sets

Application: . With one E 100 blade Ident. No. 800: For holders B, C, D, E, F, G, K . Holder for all E blades Ident. No. 820: For twist drills, reamers and needle ﬁ les 0.5-8 mm in diameter . Shank diameter: 3.2 mm Ident. No. 845: For deburring steel, aluminium, copper and plastic . Ident. No. 877–878: Direct mounting (safety lock) Ident. No. 876: Fits all holders and blades . Ident. No. 885: Robust aluminium design Ident. No. 885: For all holders for heavy-duty use . Ident. No. 895: With one B 10 blade Ident. No. 895: For deburring steel, aluminium, copper, stainless steel and Advantage: plastic . Ident. No. 876–878: High-quality, ergonomic handle with integrated blade Execution: magazine . Ident. No. 845:

Ident. No. 845 Ident. No. 895 Ident. No. 885 Ident. No. 800 Ident. No. 820 Ident. No. 876–878

Suitable for blade type B | E | F - E B | E | F B E E | F B 2-component 2-component 2-component Material of the grip handle Plastic Plastic Plastic plastic plastic plastic Aluminium Plastic Ident. No. 800 820 845 876 877 878 885 895 53811... ● ● ● ● ● ● ● ● Prod. Gr. 554

Source: Hahn+Kolb Werkzeuge GmbH 1500Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1497_EN_2018_KERN[21855227]-s.indd 1500 12/17/2018 3:36:45 PM Hand tools \ Manual deburring tools

Deburring tool Sets

Application: . Ident. No. 902: Ident. No. 900: For deburring and scraping, normal use . Blade holder D and E Ident. No. 901: For deburring and scraping, for heavy-duty use . Blades D 80 C, D 82 C, E 100, E 111, E 200, E 300, E 700 Ident. No. 902: For deburring and cleaning sheet metal . Ident. No. 903: Ident. No. 903: For deburring and chamfering round parts . Blade holder E and F . Blades E 100, E 111, E 200, E 300, E 601 and F 20, F 26 Ident. No. 904: For deburring all challenging materials . Ident. No. 904: Execution: . Stable aluminium handle for heavy-duty use . Blade holder with quick-action chuck B and E . Ident. No. 900: . Blade holder B and C . Blades B 10, B 11, B 20, B 30, E 100, E 111, E 200, E 300 . Blades B 10, B 20, B 30, B 60, B 11, B 70 and C 40 Advantage: . Ident. No. 901: . Ident. No. 904: Increased service life thanks to TiN coating on the blades . Blade holder E and C . Blades E 100, E 200, E 300, E 600, E 700 and C 42

Ident. No. 901 Ident. No. 903 Ident. No. 904

Suitable for blade type B E B | E 2-component 2-component Material of the grip handle plastic plastic Aluminium Kit BC Ident. No. 900 53811... ● - - 901 53811... Kit EC Ident. No. - ● - Kit DE Ident. No. - 902 53811... ● - Kit EF Ident. No. - 903 53811... ● - 904 53811... Kit TIN Ident. No. - - ● Prod. Gr. 554

Leather wad punch ( DIN 7200 ) Drop-forged in special steel

Application: . Conical relief For punching holes in a range of materials. . Ground and polished pipes . Blue enamel paint Execution: . Special steel, drop-forged

Ø (mm) 2 3 4 5 6 7 8 9 Length (mm) 105 105 105 110 110 120 120 120 Ident. No. 502 503 504 505 506 507 508 509 53815... ● ● ● ● ● ● ● ● Ø (mm) 10 11 12 13 14 15 16 17 Length (mm) 120 130 130 140 140 140 140 145 Ident. No. 510 511 512 513 514 515 516 517 53815... ● ● ● ● ● ● ● ● Ø (mm) 18 19 20 21 22 23 24 25 Length (mm) 145 145 160 160 170 170 170 170 Ident. No. 518 519 520 521 522 523 524 525 53815... ● ● ● ● ● ● ● ● Ø (mm) 26 27 28 29 30 31 32 33 Length (mm) 170 175 175 175 190 190 190 193 Ident. No. 526 527 528 529 530 531 532 533 53815... ● ● ● ● ● ● ● ● Ø (mm) 34 35 36 37 38 39 40 42 Length (mm) 195 195 200 205 205 205 205 220 Ident. No. 534 535 536 537 538 539 540 542 53815... ● ● ● ● ● ● ● ● Ø (mm) 44 46 48 50 55 60 Length (mm) 220 220 230 230 240 260 Ident. No. 544 546 548 551 555 560 53815... ● ● ● ● ● ● Prod. Gr. 596

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1501 Availability subject to country specific rules and regulations.

1501_EN_2018_KERN[21855232]-u.indd 1501 12/17/2018 3:36:35 PM Hand tools \ Hole punches, hole saws

Set of leather wad punches ( DIN 7200 ) Diameter 3-20 mm

Application: . Conical relief For punching holes in a range of materials. . Ground and polished pipes . Blue enamel paint Execution: . Set in plastic roll-up pouch . Special steel, drop-forged Supplied diameters: Supplied diameters: Composition of set Supplied diameters: 3/6/8/10/12/16/ 3/5/6/8/10/12/13/14/ 3/6/8/10/16/20 mm 20/25 mm 16/19/22/25 mm Number of pieces in assortment/set 6 8 12 Ident. No. 800 810 820 53815... ● ● ● Prod. Gr. 596 Punch sets With straight diameters

Application: . for cutting so materials such as rubber, leather, felt, foam, PTFE etc. for manufacturing seals . or sheet metal and ﬁ bre glass up to 0.3 mm thickness Execution: Delivery: . hand-held impact holder with socket and threaded mount In plastic box with foam insert . outer and inner hole insert can be combined

Composition of set 53816... Ident. No. supplied diameters: 3/4/6/8/10/12/14/16/18/20 mm 010 ● supplied diameters: 3/4/6/8/10/12/14/16/18/20/22/24/26/30 mm 020 ● supplied diameters: 3/4/6/8/10/12/14/16/18/20/22/24/26/30/32/34/36/38/40 mm 030 ● supplied diameters: 3/4/6/8/10/12/14/16/18/20/22/24/26/30/32/34/36/38/40/42/44/46/48/50 mm 040 ● supplied diameters: 3/4/6/8/10/12/14/16/18/20/22/24/26/30/32/34/36/38/40/42/44/46/48/50/52/54/56/58/60 mm 050 ● Prod. Gr. 520 Revolving punch lever pliers

Application: . Hole diameters: 2, 2.5, 3, 3.5, 4 and 4.5 mm for perforating leather, textiles and plastic materials . hole viewing window on back of pliers . rotation direction arrows on both sides Execution: . ergonomically shaped plastic handles . patented lever system means an eﬀ ortless punching force of up to 4000 N Technical data: . hardened, precisely-sharpened hole punches . Length: 250 mm

Ident. No. 600 53820... ● Prod. Gr. 580

Tristar splitter hole puncher

Application: . When actuated with a wrench, draw bolts with ball For punching holes in sheet metal. bearings must be used

Execution: Advantage: . Sheet hole-punch system with slug splitter for . The sheet does not jam in the centre thanks to the standard steel S235 triple partition . Burr-free hole punching Delivery: . Actuated using a wrench, hydraulic punch or cord- Stamp and die – screw or tension bolt has to be less compact punch ordered separately

Ø (mm) 12.5 15.2 16.2 18.6 20.4 22.5 25.4 28.3 Suitable for max. sheet metal thickness (mm) 1.5 2 2 2 2 2 2 2 Suitable for pipe (PG) - PG 9 - PG 11 PG 13,5 PG 16 - PG 21 Screw Ø (mm) 6 9.5 9.5 9.5 9.5 9.5 9.5 9.5 Screw length (mm) 40 50 50 50 50 50 50 50 Ident. No. 125 152 162 186 204 225 254 283 53829... ● ● ● ● ● ● ● ● Ø (mm) 30.5 32.5 37 40.5 47 50.5 60 63.5 Suitable for max. sheet metal thickness (mm) 2 3 3 3 3 3 3 3 Suitable for pipe (PG) - - PG 29 - PG 36 - PG 48 - Screw Ø (mm) 9.5 19 19 19 19 19 19 19 Screw length (mm) 50 55 55 75 75 75 75 75 Ident. No. 305 325 370 405 470 505 600 635 53829... ● ● ● ● ● ● ● ● Prod. Gr. 554

Source: Hahn+Kolb Werkzeuge GmbH 1502Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1501_EN_2018_KERN[21855232]-u.indd 1502 12/17/2018 3:36:38 PM Hand tools \ Hole punches, hole saws

Screws and draw studs for hole puncher

Application: Execution: Ident. No. 010–040: For actuating using a wrench . Ident. No. 010–040: Grease the tension bolts! Metal sliding paste protects Ident. No. 050–070: For actuating using a hydraulic punch or cordless compact against wear and seizing punch

Ident. No. 070 Ident. No. 050–060

Ident. No. 010–020

Ø x length 6 x 40 mm 9.5 x 50 mm 19 x 55 mm 19 x 75 mm 19/6 x 50 mm 19/9 x 50 mm 19 x 50 mm Ball bearing Ident. No. 010 020 030 040 53829... screw ● ● ● ● - - - Tension bolt Ident. No. - - - - 050 060 070 53829... ● ● ● Prod. Gr. 554

Tristar hole puncher sets

Execution: . Ident. No. 110–120: . Sheet hole-punch system with slug splitter for . Actuated using a wrench, hydraulic punch or standard steel S235 cordless compact punch . Burr-free hole punching . Screw or tension bolt must be ordered separately . When actuated with a wrench, draw bolts with . Set in robust and practical plastic case ball bearings must be used . Ident. No. 100: . Ident. No. 120: Set of 7 stamps and stencils for . Actuated using a wrench diameters 16.2 / 20.4 / 25.4 / 32.5 / 40.5 / 50.5 . Set of six stamps and stencils for diameters / 63.5 mm 12.5/16.2/20.4/25.4/32.5/40.5 mm Ident. No. 120 . 3 ball bearing screws 6 x 40/9.5 x 50/19 x 55 Advantage: mm . The sheet does not jam in the centre thanks to the . One HSS 10.0 drill for pre-drilling triple partition . With sliding paste for ball bearing screws . Ident. No. 110: Set of ﬁ ve stamps and stencils for Technical data: diameters 16.2/20.4/25.4/32.5/40.5 mm . Suitable for max. sheet metal thickness: 3 mm

Number of pieces in assortment/set (PCS) 11 5 7 Ident. No. 100 110 120 53829... ● ● ● Prod. Gr. 554 Compact manual hydraulic punches with overpressure valve

Application: . Ident. No. 210: For punching holes with Tristar sheet metal punches. . Aluminium version . Weighs just 1.9 kg Execution: . 75 kN punching force Advantage: . Max. operating pressure: 650 bar . Tool service life is extended by the integrated overpressure valve with automatic pressure shutdown . Punching capacity: Round holes up to 82 mm/2 at 650 bar mm sheet metal, 64 mm/3 mm sheet metal . Ident. No. 200: The practical manual punch, . Square hole punch up to 68 x 68 mm/2 mm sheet without hose and cylinder, is ideal for workshops Ident. No. 200 metal and assembly tasks . Square hole punch up to 46 x 86 mm/2 mm sheet . Ident. No. 210: metal . With 90° angled and 360° rotating cylinder head, . Set comprising hydraulic punch, 19 and 19 x 9.5 making it ideally suited to conﬁ ned spaces mm tension bolt, HSS 11.0 mm drill for pre-drilling, . Easy to position the stencils on the crosshairs 3-piece spacer sleeve set thanks to one-handed operation . Set in robust and practical plastic case . Ident. No. 200: Technical data: . Straight aluminium version . Suitable for max. sheet metal thickness: 3 mm . Weighs just 1.6 kg Ident. No. 210 Version Straight Oﬀ set Ident. No. 200 210 53829... ● ● Prod. Gr. 554

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1503 Availability subject to country specific rules and regulations.

1501_EN_2018_KERN[21855232]-u.indd 1503 12/17/2018 3:36:49 PM Hand tools \ Hole punches, hole saws

HSS bimetal hole saws Made of HSS bi-metal

Application: . Cutting depth maximum 38 mm Ident. No. 014–152: For sawing circular holes in unalloyed steel (up to 700 N/ . Drill bit can be replaced with other commercially available mounts 2 mm ), non-ferrous metals, light metals, plastics, plaster, ﬁ bre and plywood . Excludes mounting shank and drill bit; please order separately! boards, light-weight building boards and general wood processing. . In individual packages, with information regarding cutting values Ident. No. 160–201: For sawing circular holes in wood and wood-substitute materials. Advantage: . Lateral slots in the body help to remove cut parts Execution: . More even cut, reduced vibration and heat generation and less force required . High degree of concentricity thanks to variable teeth spacing with 4/6 teeth per inch . Solid base plate with improved stability

Ident. No. 014–105, 111–152 Ident. No. 108, 160–201 Without drive arbor Without drive arbor

Ø (mm) 14 16 17 19 20 21 22 24 Ident. No. 014 016 017 019 020 021 022 024 53841... ● ● ● ● ● ● ● ● Ø (mm) 25 27 29 30 32 33 35 37 Ident. No. 025 027 029 030 032 033 035 037 53841... ● ● ● ● ● ● ● ● Ø (mm) 38 40 41 43 44 46 48 51 Ident. No. 038 040 041 043 044 046 048 051 53841... ● ● ● ● ● ● ● ● Ø (mm) 52 54 57 59 60 64 65 67 Ident. No. 052 054 057 059 060 064 065 067 53841... ● ● ● ● ● ● ● ● Ø (mm) 68 70 73 74 76 79 83 86 Ident. No. 068 070 073 074 076 079 083 086 53841... ● ● ● ● ● ● ● ● Ø (mm) 89 92 95 98 102 105 108 111 Ident. No. 089 092 095 098 102 105 108 111 53841... ● ● ● ● ● ● ● ● Ø (mm) 114 121 127 140 152 160 168 177 Ident. No. 114 121 127 140 152 160 168 177 53841... ● ● ● ● ● ● ● ● Ø (mm) 210 Ident. No. 201 53841... ● Prod. Gr. 528 Accessories For HSS bimetal hole saws

Application: Ident. No. 330: To eject the centre a er cutting Ident. No. 230: As mounting shank for keyhole saws from 14-30 mm in diameter Ident. No. 250: As mounting shank for keyhole saws from 32-210 mm in Execution: diameter . Ident. No. 210–250: Includes centring drill Ident. No. 270: As spare centring drill for keyhole saw mounting shanks . Ident. No. 230, 250: Please note that the striking mechanism must be Ident. No. 280: For extending the hexagon mounting shanks of keyhole saws switched oﬀ when SDS is used! . Ident. No. 270: HSS centring drill, 6.35 mm

Ident. No. 270 Ident. No. 280 Ident. No. 210, 240 Ident. No. 230, 250

Suitable for min./max. Ø 14-30 mm 32-210 mm 14-210 mm Mounting shank with 9.5-mm Ident. No. 210 53841... hexagon drive ● - - Mounting shank with Ident. No. - 240 - 53841... 11.1-mm hexagon drive ● Mounting shank with SDS 230 250 - 53841... drive Ident. No. ● ● Spare centring drill, 6.35 mm Ident. No. - - 270 53841... ● 300-mm extension for 9.5 280 53841... and 11.1-mm hexagon Ident. No. - - ● mounting shank Ejector spring Ident. No. - - 330 53841... ● Prod. Gr. 528

Source: Hahn+Kolb Werkzeuge GmbH 1504Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1504_EN_2018_KERN[21855237]-v.indd 1504 12/17/2018 3:36:35 PM Hand tools \ Hole punches, hole saws

Hole saw sets

Application: . Includes spare centring drill For sawing circular holes in unalloyed steel (up to 700 N/mm2), non-ferrous met- . Stored in robust tool case als, light metals, plastics, plaster, ﬁ bre and plywood boards, light-weight building boards and general wood processing. Advantage: . Lateral slots in the body help to remove cut parts Execution: . More even cut, reduced vibration and heat generation and less force required . HSS bi-metal thanks to variable teeth spacing with 4/6 teeth per inch . Two mounting shanks with hexagon drive

Ident. No. 005 Ident. No. 006 Ident. No. 008

Supplied diameters: Supplied diameters: supplied diameters: 16/19/22/25/ Composition of set 16/19/22/29/35/44/52/57/67 29/32/35/38/44/51/64/76 mm 22/29/35/44/51/64/68 mm mm Ident. No. 005 006 008 53841... ● ● ● Prod. Gr. 528 Sandﬂ ex bimetal hole saws

Application: Execution: . 4/6 teeth per inch Suitable for wood, plastic, non-ferrous metals, steel . Maximum cutting depth 38 mm . Lateral slots facilitate rapid removal of cores and stainless steel

Ident. No. 019–030 Ident. No. 040–050 Ident. No. 055–152

Ø 53843... Ø 53843... Ident. No. Ident. No. 19 019 ● 64 064 ● 20 020 ● 70 070 ● 27 027 ● 92 092 ● 30 030 ● 102 102 ● 40 040 ● 114 114 ● 48 048 ● 121 121 ● 50 050 ● 127 127 ● 55 055 ● 133 133 ● 60 060 ● 140 140 ● 152 152 ● Prod. Gr. 519 Accessories for Sandﬂ ex bimetal hole saws

Application: Drive arbor with SDS drive

Suitable for min./max. Ø 14-30 mm 32-210 mm Ident. No. 320 330 53843... ● ● Prod. Gr. 519

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1505 Availability subject to country specific rules and regulations.

1504_EN_2018_KERN[21855237]-v.indd 1505 12/17/2018 3:36:39 PM Hand tools \ Hole punches, hole saws

Cemented carbide shallow-cut hole saw

Application: . Cemented carbide blades can be repeatedly For sawing circular holes in steel, plastics, alu- ground minium, zinc, plasterboard, wood and light-weight . Can be used on manual and pillar drills (without construction boards. automatic feed) . Stainless steel sheeting up to 2 mm Execution: . Non-alloy steels up to 4 mm . With ejector spring and replaceable centring drill . Maximum cutting depth: 12 mm

Ø (mm) 16 18 20 22 22.5 25 26 27 28 30 35 40 Ident. No. 160 180 200 220 225 250 260 270 280 300 350 400 53842... ● ● ● ● ● ● ● ● ● ● ● ● Prod. Gr. 529 Hand rivet tool

Application: . Ergonomically shaped handles For blind rivets made from aluminium alloy, copper, steel and stainless steel. Delivery: With 4 nosepieces Execution: . Hand riveting pliers with transmission Length (mm) 270 Suitable for max. rivet Ø (rivet material: aluminium) (mm) 4 Suitable for max. rivet Ø (rivet material: stainless steel) (mm) 4 Ident. No. 020 53197... ● Prod. Gr. 593

Blind riveting pliers and riveters

Application: . The long tool stroke means that inconvenient adjustments are not necessary For blind rivets made from aluminium alloy, copper, steel and stainless steel. . Pliers feature slim head, particularly handy for diffi cult-to-reach areas . Patented intermediate lever system reduces the force required and dampens Execution: the tear-off eff ect . Ident. No. 015: . Ident. No. 025: . Pliers casing made from high-quality die-cast aluminium . Robust placement device with riveting mandrel container . Sturdy steel plier arms . One-handed operation with 30% less force required . Comfortable working thanks to ergonomically shaped handles . Ident. No. 030: Optimum lever action and pinching guard for your hands . Mandrel is ejected automatically using opening spring . Pliers feature slim head, particularly handy for diffi cult-to-reach areas Delivery: . Ident. No. 020: Ident. No. 015: With 4 nosepieces . High-quality chrome-vanadium steel pliers Ident. No. 020–025: With 3 nosepieces . Comfortable working thanks to ergonomically shaped handles Ident. No. 030: With 5 nosepieces

Ident. No. 015 Ident. No. 030

Ident. No. 020

Ident. No. 025 Model NTS NTX Flipper HN 2 Length (mm) 275 260 212 570 Suitable for max. rivet Ø (rivet material: aluminium) (mm) 5 5 5 6.4 Suitable for max. rivet Ø (rivet material: stainless steel) (mm) 4 4 4 6.4 Ident. No. 015 020 025 030 53195... ● ● ● ● Prod. Gr. 561 Accessories for 53195 015 53195 020 Spare chuck jaws Ident. No. 210 210 53195... ● ●

Source: Hahn+Kolb Werkzeuge GmbH 1506Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1504_EN_2018_KERN[21855237]-v.indd 1506 12/17/2018 3:36:49 PM Hand tools \ Riveting tools

Rivet assortments with hand blind rivet tools

Execution: . Ident. No. 037–038: Assortment in steel metal case . Ident. No. 035: . Ident. No. 038: . Includes corresponding twist drill . With 12 blind rivet sizes . With 100x aluminium blind rivets, 4 mm in diameter . Aluminium/steel: 3 x 8/3 x 10/3 x 12/4 x 5/4 x 6/4 x 8/4 x 10/4 x 12 mm . Short, medium and long blind rivets . Copper/steel: 3 x 6/4 x 6 mm . With washers and riveting instructions . Steel/steel: 3 x 5/3 x 7 mm . Ident. No. 035–036: Assortment in plastic case Delivery: . Ident. No. 036: Ident. No. 035: With 4 nosepieces . With 250x multi-range blind rivets, PolyGrip, aluminium/steel With 3 nosepieces . Rivets in 3.2 x 8/4 x 10 and 4.8 x 10 mm Ident. No. 036–038: . Ident. No. 037: . With 5 blind rivet sizes Technical data: . . Aluminium/steel: 3 x 6/3 x 8/4 x 6/4 x 10 mm Suitable for max. rivet diameter (rivet material: aluminium): 5 mm . Suitable for max. rivet diameter (rivet material: stainless steel): 4 mm . Steel/steel: 3 x 6 mm

Ident. No. 035 Ident. No. 036 Ident. No. 037 Ident. No. 038

Model Nietboy Flipper Junior rivet box Rivet box Length (mm) 275 212 260 260 Ident. No. 035 036 037 038 53195... ● ● ● ● Prod. Gr. 561

Pneumatic-hydraulic blind riveting tools

Application: . Die-cast aluminium pneumatic cylinder Ident. No. 055: For rapid placement of blind rivets made of all materials up to 5 . Aluminium rotating hydraulic head mm in diameter and aluminium/steel up to 6 mm in diameter. . Hardened and hard chrome-plated piston Ident. No. 057: For rapid placement of blind rivets made of all materials up to 6.4 . Ident. No. 054–058: mm in diameter. . Powerful, patented gripping mechanism and chuck jaw system Ident. No. 058: For rapid placement of blind rivets made of all materials up to . The complete device stroke is used to place the rivet 6.4 mm in diameter and aluminium up to 8 mm in diameter. . Compressed air-saving technology; air required to place the rivet is also used to eject the riveting mandrel Execution: . Extremely low noise emissions. . Ident. No. 040: . High placement forces with lightweight device

Ident. No. 040 Ident. No. 054 Ident. No. 055–057 Ident. No. 058

Model PH 2 Taurus 1 Taurus 2 Taurus 3 Taurus 4 Suitable for min./max. rivet Ø 3-5 mm 2.4-4 mm 4-6 mm 4.8-6.4 mm 4.8-8 mm Rivet setting force (N) 7375 4200 9000 14000 20000 Max. working stroke (mm) 15 15 18 25 19 Min./max. working pressure 0-6 bar 5-7 bar 5-7 bar 5-7 bar 5-7 bar Weight (kg) 1.3 1.3 1.6 1.9 2 Ident. No. 040 054 055 057 058 53195... ● ● ● ● ● Prod. Gr. 561

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1507 Availability subject to country specific rules and regulations.

1507_EN_2018_KERN[21855249]-r.indd 1507 12/17/2018 3:36:41 PM Hand tools \ Riveting tools

AccuBird and PowerBird electromechanical blind riveters

Execution: . Ident. No. 063–064, 067: 18 V li-ion rechargeable battery, 2.1 Ah . Ident. No. 061: With 14.4-V li-ion battery, 1.3 Ah . Ident. No. 066: With 14.4-V li-ion battery, 2.6 Ah . Ident. No. 061, 066–067: . Ident. No. 067: . Electro-mechanical placement device . Various lighting options in the adjusting ring . With integrated container for torn-oﬀ mandrels . BLDC motor, brushless . Includes charger, interchangeable nosepiece and assembly key . Hand-friendly housing with so grip . Ident. No. 063–064: . electro-mechanical setting tool Advantage: . integrated container for torn-oﬀ mandrels . Ident. No. 061, 066: Quick working speed while also maintaining excellent . includes charger, interchangeable nosepiece and installation key performance . BLDC brushless motor . Ident. No. 067: . hand-friendly housing with so grip . High placement force for particularly large blind rivets . 25-mm device stroke for long blind rivets

Ident. No. 061 Ident. No. 063 Ident. No. 064 Ident. No. 066 Ident. No. 067

Model Accu Bird AccuBird Pro PowerBird PowerBird Pro PowerBird Pro Gold Suitable for min./max. rivet Ø 2.4-5 mm 2.4-5.2 mm 4.8-6.4 mm 4.8-6.4 mm 4.8-6.4 mm Max. working stroke (mm) 20 25 20 25 25 Rivet setting force (N) 8500 10000 13000 15000 20000 Ident. No. 061 063 066 064 067 53195... ● ● ● ● ● Prod. Gr. 561 Accessories for 53195 061 53195 066 53195 067 53195... Spare rechargeable Ident. No. 071 076 077 battery ● ● ● 53195... Universal nosepiece Ident. No. 270 AccuBird model ● - - Ident. No. 080 53195... Replacement charger - ● - Blind rivet nut hand tools

Execution: . Ident. No. 280: Minimum manual force required thanks to special lever arm . Ident. No. 280–300: With M5 threaded mandrel and nosepiece arrangement and ratchet mechanism . Ident. No. 302: . Ident. No. 280–300: Rapid replacement of threaded mandrels without the . With M6 threaded mandrel and nosepiece need for tools . Forged steel housing and radial bearing . Ident. No. 302: Favourable transmission ratio means little force is required, even when placing large blind rivet nuts Advantage: . Simple to adjust the stroke using the knurled nut with stroke scale for secure Delivery: and complete placement of the blind rivet nut replacement thread mandrels and nozzles available deliverable from stock - please request

Ident. No. 302 Ident. No. 280 Ident. No. 300

Model FireFly GBM 10 GBM 30 Length (mm) 220 260 470 Suitable for max. rivet Ø (rivet material: aluminium) (mm) 6 6 10 Suitable for max. rivet Ø (rivet material: stainless steel) (mm) 6 5 10 Ident. No. 280 300 302 53195... ● ● ● Prod. Gr. 561

Source: Hahn+Kolb Werkzeuge GmbH 1508Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1507_EN_2018_KERN[21855249]-r.indd 1508 12/17/2018 3:36:53 PM Hand tools \ Riveting tools

Blind rivet nut box GBM 10

Execution: Advantage: . Set with manual blind rivet nut tool GBM 10 . Simple to adjust the stroke using the knurled nut . With M4, M5 and M6 threaded mandrel and with stroke scale for secure and complete place- nosepiece ment of the blind rivet nut . Various blind rivet nut sizes from M4-M6, . Rapid replacement of threaded mandrels without aluminium the need for tools . For riveting material thicknesses from 0.25-3 mm Delivery: With 3 nosepieces, in sheet steel case Model GBM 10 Length (mm) 260 Suitable for max. rivet Ø (rivet material: aluminium) (mm) 6 Suitable for max. rivet Ø (rivet material: stainless steel) (mm) 6 Ident. No. 350 53195... ● Prod. Gr. 561 FireBird, FireBird Pro and FireBird Pro Gold Edition cordless blind rivet nut setting tool in case

Execution: Advantage: . Ident. No. 401: . Ident. No. 401: . Electro-mechanical placement device with automatic two-way drilling . Quick working speed while also maintaining excellent performance function . High degree of functional reliability thanks to simple drilling of blind rivet . No cables, with 14.4-V li-ion rechargeable battery, 1.3 Ah nuts and electronic control of the placement stroke . Includes charger, nosepiece and M4, M5 and M6 threaded mandrels . Extremely comfortable to use with fatigue-free working thanks to balanced . In sheet steel case centre of gravity and handle that adapts to your hand . For processing M3-M10 rivet nuts . Ident. No. 405–410: . Ident. No. 405: . quick working speed while maintaining excellent performance . includes charger, nosepiece and M4, M5 and M6 threaded mandrels . high functional reliability thanks to simple drilling of blind rivet nuts and . for processing M3-M10 rivet nuts electronic control of the setting stroke . Ident. No. 405–410: . balanced centre of gravity and ergonomic handle for extremely comfortable, . electro-mechanical setting tool with automatic two-way drilling function fatigue-free work . cordless, with 18-V li-ion rechargeable battery, 2.1 Ah . in sheet steel case Delivery: replacement thread mandrels and nozzles available deliverable from stock - . Ident. No. 410: please request . includes charger, nosepiece and M6, M8 and M10 threaded mandrels . for processing M3-M12 rivet nuts

Model FireBird FireBird Pro FireBird Pro Gold Max. working stroke (mm) 10 10 10 Rivet setting force (N) 13000 15000 20000 Weight (kg) 2.1 2.3 2.3 Ident. No. 401 405 410 53195... ● ● ● Prod. Gr. 561 Ident. No. 401 Ident. No. 405 Ident. No. 410

FireFox pneumatic-hydraulic blind rivet nut setting tool

Execution: Delivery: . Placement force can be adjusted Ident. No. 441: includes thread mandrel and nozzle . Ergonomic design ensures fatigue-free work M 3, M 4, M 5 and M 6, further replacement thread mandrels and nozzles available from stock - please Advantage: request . Placement force and stroke can be adjusted for Ident. No. 451: includes thread mandrel and nozzle optimum and reliable anchoring of rivet nuts M 4, M 5, M 6 and M 8, further thread mandrels and . As soon as the blind rivet nut is positioned by nozzles available from stock - please request applying light pressure, the twisting process starts Ident. No. 441 automatically Technical data: . Extremely quick placement procedure with subse- . Min./max. working pressure: 5-7 bar quent automatic untwisting process . Extremely comfortable to use with fatigue-free working thanks to balanced centre of gravity and handle that adapts to your hand

Ident. No. 451 Model FireFox1 FireFox2 Suitable for min./max. rivet Ø 3-6 mm 3-12 mm Rivet setting force (N) 12000 18500 Max. working stroke (mm) 7.5 10 Weight (kg) 1.9 2.4 Ident. No. 441 451 53195... ● ● Prod. Gr. 561

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 1509 Availability subject to country specific rules and regulations.

1509_EN_2018_KERN[21855260]-10.indd 1509 12/17/2018 3:36:45 PM Hand tools \ Riveting tools

CHOOSE FROM OVER 70,000 PRODUCTS.

WE HAVE WHAT IT TAKES.

For a complete range of products that meet the toughest demands, visit www.iconridge.com

Source: Hahn+Kolb Werkzeuge GmbH 1510Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

1509_EN_2018_KERN[21855260]-10.indd 1510 12/17/2018 3:36:45 PM