DOCSLIB.ORG

Neutronics and Tritium Breeding Capability for Liquid Metal-Based Blanket (DCLL)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Neutronics and Tritium Breeding Capability for Liquid Metal-Based Blanket (DCLL) Neutronics and Tritium Breeding Capability for Liquid Metal-Based Blanket (DCLL) L. El-Guebaly Fusion Technology Institute University of Wisconsin-Madison http://fti.neep.wisc.edu/UWNeutronicsCenterOfExcellence Contributors: S. Malang (Consultant), L. Waganer (Consultant), A. Rowcliffe (ORNL) FESAC TEC 2017 Panel Community Input Workshop Rockville, MD May 30 – June 1, 2017 Scope and Motivation • Transition from ITER to fusion DEMO and power plant requires development of tritium breeding blanket to generate tritium (T) in unprecedented large quantities to sustain the plasma operation. • Dual-coolant lead lithium (DCLL) blanket is prominent option for future US devices: tokamaks, spherical torii, and stellarators. • This talk : – Provides brief overview of breeding capability of lead lithium (PbLi) breeder under typical power plant operating conditions – Identifies uncertainties in tritium breeding prediction – Outlines critical and design variables that determine and control breeding level – Suggests developing several technologies to assure T self-sufficiency and mitigate risk of shortage or surplus of T – Mentions briefly related transforming technologies: – Tritium extraction – Additive manufacturing and nano-fabrication – Advanced ODS alloys. 2 Nuclear Assessment Involves Three Closely-Related Tasks Neutronics: Shielding: Activation: – Neutron wall loading distribution: peak – Shielding of permanent – Radioactive product inventory (for and average values components (for protection safety, environmental, and licensing assessments) – Tritium breeding ratio (TBR) for T-self against radiation) – Environmental impact of FNSF sufficiency – Radial and vertical build definition and radwaste classification – Radial and poloidal nuclear heating (for physics code, CAD drawings, – Decay heat (for thermal response distribution (for thermal hydraulic and systems code analysis) of components during LOCA/ analysis) – Neutron streaming through LOFA events) – Nuclear energy multiplication (for power assembly gaps and penetrations – Biological dose (for maintenance balance) (for protection of external components) crew, workers and public – Radiation damage to structural materials protection). (dpa, He production, H production) – Bioshield specifications. – Service lifetimes of all components based on neutron dose (for replacement frequency and cost). This talk focuses on T breeding issues – a subtask of neutronics assessment for fusion devices (such as power plants, DEMO, and FNSFs) seeking T self-sufficiency Refs: L. El-Guebaly, “Progressive Steps Towards Integral Nuclear Assessments for Fusion Devices,” Transactions of ANS winter meeting, Washington, DC, November 10-14, 2013. Laila El-Guebaly, “Overview of ARIES Nuclear Assessments: Neutronics, Shielding,3 and Activation,” Progress in Nuclear Science and Technology 4, 118-121 (2014). DOI: 10.15669. Tritium Resources and Economics • Cost of purchasing T ($30k to ~$118k per gram)1 is expensive enough to enable defining mission of DEMO and power plants (e.g., T self-sufficiency) and designing some components around TBR. • ITER will consume almost all T recovered from CANDU reactors (~1.7 kg/y). • Other sources of T exist in U.S. and abroad, but they are limited in supply, classified, uneconomical, and/or inaccessible for general use2. • For these reasons, fusion devices generating substantial fusion power and consuming 10s-100s kg of T annually must breed their own T in blanket (TBR > 1) to negate risk of relying on external supplies to provide/control essential fuel of machine. 1500 2000 MW P • TBR should be estimated with high fidelity as deficiencies in 1250 f $118k / g of T TBR prediction represent significant economic burden. 1000 • A small 1% error in TBR estimation is equivalent to ~1.1 kg of 750 T/FPY for 2000 MW fusion power. 500 250 • For T unit cost ranging from ~$30k to ~$118k per gram, 1% Tritium Cost ($M / FPY) $30k / g of T 0 deficiency implies an additional FPY operational cost of 0 5 10 $33-131M to purchase T from external sources. Error in TBR Estimation (%) Refs: 1- DOE Inspector General Report DOE IG-0632, December 2003; www.ig.energy.gov/documents/CalenderYear2003/ig-0632.pdf4 . 2- The JASON Report on Tritium. MITRE Corporation, JSR-11-345, November 2011. Variety of Liquid and Ceramic Breeders Proposed to Breed Tritium since 1970 2 84.3 Pb Li 15.7 84.3 (90% Li-6) Li Pb (90% Li-6) 15.7 75 Li Sn 1.5 O 2 25 Li Li Flibe (90% Li-6) Liquid Metals: PbLi, Li 4 3 3 SiO Flibe ZrO 4 TiO 2 2 2 Li Li 1 Li AlO Molten Salts: LiSn, Flibe, Flinabe Li 75 Sn Ceramic Breeders: Li2O, Li4SiO4, 25 Local Tritium Breeding Ratio 0.5 Li Li2ZrO3, Li2TiO3, LiAlO2 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Ceramic Breeders Liquid Breeders Tritium breeding ratio (TBR) is key metric for T self-sufficiency (TBR is ratio of T bred in blanket relative to T burned in plasma) (Local TBR for fairly thick cylindrical blanket (2 m), no structure, no multiplier, natural Li unless indicated, 100% dense materials at room temperature. Some breeders may contain neutron multiplier (e.g., Pb in LiPb and Be in Flibe). Ref: L. A. EL-GUEBALY, L. V. BOCCACCINI, R. J. KURTZ, and L. M. WAGANER, “Technology-Related Challenges Facing Fusion Power Plants,” Chapter in book: Fusion Energy and Power: Applications, Technologies and Challenges.5 NOVA Science Publishers, Inc.: Hauppauge, New York, USA. ISBN: 978-1-63482-579-5 (2015). PbLi* – Most Popular Liquid Metal Worldwide • In US, PbLi is preferred breeder for future devices: Fusion Nuclear Science Facilities (FNSF) and power plants based on tokamak, spherical torus, and stellarator concepts. • In Europe, EUROfusion is currently examining dual coolant lead lithium (DCLL), water-cooled lead lithium (WCLL), and He-cooled lead lithium (HCLL) blankets for EU DEMO and/or power plants. • Japan prefers molten salts (Flibe/Flinabe) with some interest in PbLi blankets. • China is developing both HCLL and DCLL blankets for fusion applications. • Most PbLi-based blankets are supplemented with water or helium coolant, as in WCLL, HCLL, and DCLL. * Refs: S. Malang et al. (2011). “Development of the lead lithium (DCLL) blanket concept,’’ Fusion Science and Technology, 60, 249. L. A. EL-GUEBALY, L. V. BOCCACCINI, R. J. KURTZ, and L. M. WAGANER, “Technology-Related Challenges Facing Fusion Power Plants,” Chapter in book: Fusion Energy and Power: Applications, Technologies and Challenges. NOVA Science Publishers, Inc.: Hauppauge, New York, USA. ISBN: 978-1-63482-579-5 (2015). Laila A. El-Guebaly, “Fifty Years of Magnetic Fusion Research (1958-2008):6 Brief Historical Overview and Discussion of Future Trends.” Energies 2010, 3 (6), 1067-1086 (June 2010). Available at: http://www.mdpi.com/1996-1073/3/6/ PbLi: Most Popular Liquid Metal Worldwide (Cont.) (US Tokamaks) PbLi Li CB ARIES-I ARIES-ACT-2 1000 MWe, 6.75 m R, 4.5 A 1000 MWe, 9.75 m R, 4 A 1.9% βT, 21 T Bc, 16 TFC 1.5% βT, 14.4 T Bc, 16 TFC SiC/Li2ZrO3/He/Be Blanket FS/LiPb/He Blanket 49% ηth, 76% Avail 44% ηth, 85% Avail 87 mills/kWh ~91 mills/kWh ARIES-II ARIES-IV STARFIRE 1000 MWe, 5.6 m R, 4 A 1000 MWe, 6 m R, 4 A 1st Steady-State Design 3.4% βT, 16 T Bc, 16 TFC 3.4% βT, 16 T Bc, 16 TFC 1200 MWe, 7 m R, 3.6 A V/Li Blanket SiC/Li2O/He/Be Blanket 6.7% βT, 11 T Bc, 12 TFC 46% ηth, 76% Avail 49% ηth, 76% Avail PCS/LiAlO2/H2O/Be Blanket 76 mills/kWh 68 mills/kWh 36% ηth, 75% Avail Tokamak (29) 110 mills/kWh 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 ARIES-ACT Aggressive and Conservative Tokamaks (UCSD) DEMO-S steady state DEMO Russia SlimCS Compact low-A DEMO Japan FDS-II China power plant China VECTOR VEry Compact TOkamak Reactor Japan ARIES-AT DEMO2001 Japan 1000 MW , 5.5 m R, 4 A PPCS Conceptual Study of Fusion Power Plants EU e ARIES-AT Advanced Tokamak (UCSD) 9.2% βT, 11 T Bc, 16 TFC-HT A-SSTR2 Combine advantages of A-SSTR and DREAM Japan SiC/LiPb Blanket ARIES-RS Reversed-Shear tokamak (UCSD) w/ YBCO 59% ηth, 85% Avail A-SSTR Advanced Steady State Tokamak Japan HTS Magnet 1970s UWMAK series DREAM Drastically Easy Maintenance Tokamak Japan 48 mills/kWh contributed to basic understanding CREST Compact Reversed Shear Tokamak Japan of fusion power plant design and PULSAR-I/II pulsed tokamak (UCSD) ARIES-IV Second-stability tokamak (UCLA) technology and uncovered ARIES-II Second-stability tokamak (UCLA) undesirable aspects of: ARIES-III D-3He-fuelled tokamak (UCLA) SSTR steady state tokamak Japan - Pulsed operation ARIES-I First-stability tokamak (UCLA) - Low power density machine Apollo D-3He Fuelled Tokamak (UW) Wildcat catalyzed D-D tokamak (ANL) - Plasma impurity control problems STARFIRE Commercial Tokamak Fusion Power Plant (ANL) - Maintainability issues. NUWMAK University of Wisconsin Tokamak (UW) Russia TVE-2500 high temperature power plant with direct conversion ARIES-RS Many proposed technologies are still UWMAK-III University of Wisconsin Tokamak (UW) 1000 MWe, 5.5 m R, 4 A considered in recent designs: 316-SS, Li UWMAK-II University of Wisconsin Tokamak (UW) 5% βT, 16 T Bc, 16 TFC,V/Li and LiPb breeders, solid breeders, Be A Fusion Power Plant (PPPL) UWMAK-I University of Wisconsin Tokamak (UW) 46% ηth, 76% Avail multiplier, NbTi and Nb3Sn S/C, solid Premak University of Wisconsin Tokamak (UW) 7 76 mills/kWh and liquid Li divertors. 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 calendar year PbLi: Most Popular Liquid Metal Worldwide (Cont.) (International
Load more

Recommended publications
  • Recent Tritium Breeding Experiments with Lithium Titanate Mock-Ups Irradiated with DT Neutrons
    JAP]Rf-Conf 2004-012 III11111 1111111111 11111 11111 11111 11IN JP0450771 7.2 Recent tritium breeding experiments with lithium titanate mock-ups irradiated with DT neutrons Axel Klix", Yury Verz iloVb , Kentaro Ochiai6, Takeo Nishitan b, Akito Takahashi' ' Department of Nuclear Engineering, Osaka nVuersity, Sulta, Japan bFusion Neutronics Source, Japan Atomic Energy Research Institute, Tokaimura, Japan Experiments with breeding blanket mock-ups composed of layers of beryllium, ferritic steel F82H and 6Li enriched lithium titanate, Li2TiO3 are currently under investigation at Fusion Neutronics Source (FNS) of JAERI. Pellets of Li2TiO3 were used as detectors for the tritium production rate inside the tritium breeding layer. A method for direct measurement of low concentrations of tritium in Li2TiO3 was developed. After irradiation, the pellets were dissolved in concentrated hydrochloric acid and the tritium activity in the sample solution was measured by liquid scintillation counting. This method was applied to several mock-up experiments and the experiments analyzed with three-dimensional Monte Carloc calculations. In some cases the tritium production rate was found to be overestimated by the calculations. KEYWORDS: FNS, D-T neutrons, breeding blanket, lithium titanate, tritium I Introduction 100 r -So rce: FENIS_ Tritium is a fuel for fusion reactors based on the E T Deuterium-Tritium (DT) fusion reaction. It must be pro- 1: 10 duced artificially in a lithium compound in the breeding .0 Q) T :7 -7 7-7, blanket which surrounds the fusion zone. A sufficiently U) _ i high tritium production performance is an important de- U3 f sign parameter for the breeding blanket.
    [Show full text]
  • Fusion Rockets for Planetary Defense
    | Los Alamos National Laboratory | Fusion Rockets for Planetary Defense Glen Wurden Los Alamos National Laboratory Exploratory Plasma Research Workshop Feb 26, 2016 LA-UR-16-21396 LA-UR-15-xxxx UNCLASSIFIED Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA April 2014 | UNCLASSIFIED | 1 | Los Alamos National Laboratory | My collaborators on this topic: T. E. Weber1, P. J. Turchi2, P. B. Parks3, T. E. Evans3, S. A. Cohen4, J. T. Cassibry5, E. M. Campbell6 . 1Los Alamos National Laboratory . 2Santa Fe, NM . 3General Atomics . 4Princeton Plasma Physics Laboratory . 5University of Alabama, Huntsville . 6LLE, University of Rochester, Rochester Wurden et al., Journal of Fusion Energy, Vol. 35, 1, 123 (2016) UNCLASSIFIED Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA April 2014 | UNCLASSIFIED | 2 | Los Alamos National Laboratory | How many ways is electricity made today? Primary Energy Source Nominally CO2 Free Current capacity (%) Expected Lifetime (yrs) Natural Gas no 100 Coal no 80.6 400 Oil no < 50 Biomass neutral 11.4 > 400 Wind yes 0.5 > 1000 Solar photovoltaic yes 0.06 > 1000 Solar thermal yes 0.17 > 1000 Hydro yes 3.3 > 1000 Wave/Tidal yes 0.001 > 1000 Geothermal yes 0.12 > 1000 Nuclear fission yes 2.7 > 400 [i] REN21–Renewable Energy Policy Network for the 21st Century Renewables 2012–Global Status Report, 2012, http://www.map.ren21.net/GSR/GSR2012.pdf , http://en.wikipedia.org/wiki/Energy_development UNCLASSIFIED Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA April 2014 | UNCLASSIFIED | 3 | Los Alamos National Laboratory | What is the most important product that fusion could deliver? .
    [Show full text]
  • Physics and Technology Considerations for the Deuterium–Tritium Fuel Cycle and Conditions for Tritium Fuel Self Sufficiency
    International Atomic Energy Agency Nuclear Fusion Nucl. Fusion 61 (2021) 013001 (51pp) https://doi.org/10.1088/1741-4326/abbf35 Review Physics and technology considerations for the deuterium–tritium fuel cycle and conditions for tritium fuel self sufficiency 1, 1 1 2 Mohamed Abdou ∗, Marco Riva , Alice Ying , Christian Day , Alberto Loarte3, L.R. Baylor4, Paul Humrickhouse5, Thomas F. Fuerst5 and Seungyon Cho6 1 University of California, Los Angeles (UCLA), United States of America 2 Karlsruhe Institute of Technology (KIT), Germany 3 ITER Organization, Route de Vinon-sur-Verdon, CS90046, 13067 St Paul-lez-Durance, France 4 Oak Ridge National Laboratory (ORNL), United States of America 5 Idaho National Laboratory (INL), United States of America 6 National Fusion Research Institute (NFRI), Korea, Republic Of E-mail: [email protected] Received 22 June 2020, revised 16 September 2020 Accepted for publication 7 October 2020 Published 23 November 2020 Abstract The tritium aspects of the DT fuel cycle embody some of the most challenging feasibility and attractiveness issues in the development of fusion systems. The review and analyses in this paper provide important information to understand and quantify these challenges and to dene the phase space of plasma physics and fusion technology parameters and features that must guide a serious R&D in the world fusion program. We focus in particular on components, issues and R&D necessary to satisfy three ‘principal requirements’: (1) achieving tritium self-sufciency within the fusion system, (2) providing a tritium inventory for the initial start-up of a fusion facility, and (3) managing the safety and biological hazards of tritium.
    [Show full text]
  • Tritium Breeding Blanket Technology, Tritium Fuel Cycle, and Tritium Self
    Introduction to the Tritium Workshop Day and Overview of the Tritium Fuel Cycle and Conditions for Tritium Fuel Self- Sufficiency and Other Tritium Issues Mohamed Abdou 4th IAEA DEMO Programme Workshop November 15th-18th, 2016 - Karlsruhe, Germany 1 Tritium Workshop Day Session Chair: Mohamed Abdou, Co-Chair: Scott Willms Poster Session Coordinator: Paul Humrickouse Goals: The Tritium Workshop day presentations and discussions will focus primarily on the plasma physics and fusion technologies parameters and conditions required to attain Tritium Self- Sufficiency in fusion DEMO and Power Plants. Speakers and discussions among workshop participants will: A. Identify the key plasma physics and fusion technology conditions that will have the largest impact on the “required TBR” and the “achievable TBR”, B. Evaluate the current status of the relevant key areas in physics and technology and predictions for ITER, C. Provide Predictions for DEMO and Power plants and needed improvements, and D. Identify required R&D. 2 Agenda Tritium: Topic 1 Tuesday, November 15th 2016 Introduction and overview of the tritium 09:20 fuel cycle and conditions for self Mohamed Abdou (UCLA) 40 20 sufficiency 10:20 Coffee/Tea break 20 The plasma physics aspects of the tritium Alberto Loarte (ITER)/ David 10:40 40 20 burn fraction and the prediction for ITER Campbell (ITER) Predictions for plasma fueling efficiency 11:40 Larry Baylor (ORNL) 20 10 based on experiments and modelling 12:10 Lunch + posters 100 13:50 Tritium technology for ITER Scott Wilms (TTER) 30 15
    [Show full text]
  • Fusion Rockets for Planetary Defense
    | Los Alamos National Laboratory | Fusion Rockets for Planetary Defense Glen Wurden Los Alamos National Laboratory PPPL Colloquium March 16, 2016 LA-UR-16-21396 LA-UR-15-xxxx UNCLASSIFIED Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA | Los Alamos National Laboratory | My collaborators on this topic: T. E. Weber1, P. J. Turchi2, P. B. Parks3, T. E. Evans3, S. A. Cohen4, J. T. Cassibry5, E. M. Campbell6 . 1Los Alamos National Laboratory . 2Santa Fe, NM . 3General Atomics . 4Princeton Plasma Physics Laboratory . 5University of Alabama, Huntsville . 6LLE, University of Rochester, Rochester Wurden et al., Journal of Fusion Energy, Vol. 35, 1, 123 (2016) UNCLASSIFIED Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA | Los Alamos National Laboratory | How many ways is electricity made today? Primary Energy Source Nominally CO2 Free Current capacity (%) Expected Lifetime (yrs) Natural Gas no 100 Coal no 80.6 400 Oil no < 50 Biomass neutral 11.4 > 400 Wind yes 0.5 > 1000 Solar photovoltaic yes 0.06 > 1000 Solar thermal yes 0.17 > 1000 Hydro yes 3.3 > 1000 Wave/Tidal yes 0.001 > 1000 Geothermal yes 0.12 > 1000 Nuclear fission yes 2.7 > 400 [i] REN21–Renewable Energy Policy Network for the 21st Century Renewables 2012–Global Status Report, 2012, http://www.map.ren21.net/GSR/GSR2012.pdf , http://en.wikipedia.org/wiki/Energy_development UNCLASSIFIED Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA | Los Alamos National Laboratory | What is the most important product that fusion could deliver? .
    [Show full text]
  • Multiphysics Analysis with CAD-Based Parametric Breeding Blanket Creation for Rapid Design Iteration
    PAPER • OPEN ACCESS Multiphysics analysis with CAD-based parametric breeding blanket creation for rapid design iteration To cite this article: Jonathan Shimwell et al 2019 Nucl. Fusion 59 046019 View the article online for updates and enhancements. This content was downloaded from IP address 194.81.223.66 on 11/03/2019 at 15:27 IOP Nuclear Fusion International Atomic Energy Agency Nuclear Fusion Nucl. Fusion Nucl. Fusion 59 (2019) 046019 (12pp) https://doi.org/10.1088/1741-4326/ab0016 59 Multiphysics analysis with CAD-based 2019 parametric breeding blanket creation © EURATOM 2019 for rapid design iteration NUFUAU Jonathan Shimwell1 , Rémi Delaporte-Mathurin2 , Jean-Charles Jaboulay3, Julien Aubert3, Chris Richardson4 , Chris Bowman5, Andrew Davis1 , 046019 Andrew Lahiff1, James Bernardi6 , Sikander Yasin7,8 and Xiaoying Tang7,9 1 Culham Centre for Fusion Energy (CCFE), Culham Science Centre, Abingdon, Oxfordshire OX14 3DB, J. Shimwell et al United Kingdom of Great Britain and Northern Ireland 2 Département Thermique-Énergétique, Polytech Nantes, Université de Nantes, Rue Christian Pauc, Multiphysics analysis with CAD-based parametric breeding blanket creation for rapid design iteration CS 50609, 44306 Nantes Cedex 3, France 3 Den-Département de Modélisation des Systèmes et Structures (DM2S), CEA, Université Paris-Saclay, F-91191 Gif-sur-Yvette, France Printed in the UK 4 BP Institute, Bullard Laboratories, Madingley Road, Cambridge CB3 0EZ, United Kingdom of Great Britain and Northern Ireland 5 York Plasma Institute, University of York,
    [Show full text]
  • Developing Structural, High-Heat Flux and Plasma Facing Materials for a Near-Term DEMO Fusion Power Plant: the EU Assessment
    *Manuscript Click here to view linked References Developing Structural, High-heat flux and Plasma Facing Materials for a near-term DEMO Fusion Power Plant: the EU Assessment. D Storka,1§, P Agostinib, J-L Boutardc, D Buckthorped, E Diegelee, S L Dudareva, C Englishf, G Federicig, M R Gilberta, S Gonzalezg, A Ibarrah, Ch Linsmeieri, A Li Pumaj , G Marbachc, P F Morrisk,2, L W Packera, B Rajl, M Riethe, M Q Tranm, D J Warda and S J Zinklen a Euratom - CCFE Association, Culham Science Centre, Abingdon, Oxfordshire OX14 3DB, UK b ENEA, Brasimone Research Centre, 40032, Cumugnano, Bologna, Italy c CEA, cab HC, Saclay, F-91191, Gif-sur-Yvette, France d AMEC,Booths Park, Chelford Road, Knutsford, Cheshire, WA16 8QZ, UK. e Karlsruhe Institute for Technology, IMF-I, D-7602, Karlsruhe,, Germany f National Nuclear Laboratory, Chadwick House, Warrington Road, Birchwood Park, WA3 6AE, UK g EFDA Power Plant Physics and Technology, Boltzmannstr. 2, Garching, 85748 Germany h CIEMAT, Avda. Complutense 40, Madrid,, Spain i Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, EURATOM Association, 52425 Jülich, Germany j CEA, DEN, Saclay, DM2S, SERMA, F-91191 Gif-sur-Yvette, France k formerly of TATA steel Europe, Swinden Technology Centre, Moorgate, Rotherham S60 3AR, UK l Indian National Academy of Engineering, Shaheed Jeet Singh Marg, New Delhi 110016, India m Ecole Polytechnique Federale de Lausanne – CRPP, Association Euratom-Switzerland, 1015 Lausanne. Switzerland, n Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN, 37831, USA 1Present address: techne-physis Limited, Rivendell, The Causeway, Steventon, Oxon OX13 6SJ, UK 2 Present address: 43 Hallam Road, Rotherham S60 3ED, UK Abstract: The findings of the EU 'Materials Assessment Group' (MAG), within the 2012 EU Fusion Roadmap exercise, are discussed.
    [Show full text]
  • Fusion Potential for Spherical and Compact Tokamaks
    Ac ,_ - - - - - I cly 7 -4 4 - 2- 0 TRITA-ALF-2003-01 .4b Report S ISSN 1102-2051 CCH ISRN KTH/ALF/--03/1 -- SE KTH Fusion potential for spherical and compact tokamaks Mikael Sandzelius I Iw i i9 MPwAL*"vfiP I wffiMwrRAAhv AN W.Ww AMWi,,' - ', 'R, Research and Training programme on CONTROLLED THERMONUCLEAR FUSION AND PLASMA PHYSICS (AssociationEURATOMINFR) FUSION I PLASMA PHYSICS ALFVEN LABORATORY ROYAL INSTITUTE OF TECHNOLOGY SE-100 44 STOCKHOLM SWEDEN TRITA-ALF-2003-01 ISRN KTWALF/R--03/1 --SE Fusion potential for spherical and compact tokamaks Mikael Sandzelius misa6803 student. uu se Master project in physical electrotechnology 9 ETEN OCH Stockholm, 4th February 2003 The fv6n Laboratory Division of Fusion Plasma Physics Royal Institute of Technology SE-100 44 Stockholm (Association EURATOMINFR) Printed by The Alfv6n Laboratory Division of Fusion Plasma Physics Royal Institute of Technology SE-100 44 Stockholm Abstract The tokamak is the most successful fusion experiment today. Despite this, the conventional tokamak has a long way to go before being realized into an econom- ically viable power plant. In this master thesis work, two alternative tokamak configurations to the conventional tokamak has been studied, both of which could be realized to a lower cost. The fusion potential of the spherical and the compact tokamak have been examined with a comparison of the conventional tokamak in mind. The difficulties arising in the two configurations have been treated from a physical point of view concerning the fusion plasma and from a technological standpoint evolving around design, materials and engineering. Both advantages and drawbacks of either configuration have been treated relative to the conven- tional tokamak.
    [Show full text]
  • Neutronics Analyses for a Stellarator Power Reactor Based on the HELIAS Concept
    WPS2-CPR(17) 17310 A Huler et al. Neutronics analyses for a stellarator power reactor based on the HELIAS concept Preprint of Paper to be submitted for publication in Proceeding of 13th International Symposium on Fusion Nuclear Technology (ISFNT) This work has been carried out within the framework of the EUROfusion Con- sortium and has received funding from the Euratom research and training pro- gramme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This document is intended for publication in the open literature. It is made available on the clear under- standing that it may not be further circulated and extracts or references may not be published prior to publication of the original when applicable, or without the consent of the Publications Officer, EUROfu- sion Programme Management Unit, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK or e-mail Publications.Offi[email protected] Enquiries about Copyright and reproduction should be addressed to the Publications Officer, EUROfu- sion Programme Management Unit, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK or e-mail Publications.Offi[email protected] The contents of this preprint and all other EUROfusion Preprints, Reports and Conference Papers are available to view online free at http://www.euro-fusionscipub.org. This site has full search facilities and e-mail alert options. In the JET specific papers the diagrams contained within the PDFs on this site are hyperlinked Neutronics analysis for a stellarator power reactor based on the HELIAS concept André Häußlera, Ulrich Fischera, Felix Warmerb aKarlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology (INR), 76344 Eggenstein- Leopoldshafen, Germany bMax Planck Institute for Plasma Physics (IPP), 17491 Greifswald, Germany A first neutronics analysis of the Helical-Axis Advanced Stellarator (HELIAS) power reactor is conducted in this work.
    [Show full text]
  • Tritium Breeding Strategy for Advanced Fusion Power Plants
    Tritium Breeding Strategy for Advanced Fusion Power Plants L.A. El-Guebaly University of Wisconsin-Madison [email protected] Executive summary of proposed strategic element: The transition from ITER to fusion DEMO and power plant requires the development of a tritium breeding blanket to generate tritium (T) in unprecedented large quantities to sustain the plasma operation. There is a definitive need to breed all T required to fuel the plasma and sustains its operation: 55.6 kg of T per GW of fusion power, per full power year (FPY) of operation. This white paper provides our current understanding of the breeding- related challenges for the prominent US dual-coolant lead lithium (DCLL) blanket [1,2], pinpoints the uncertainties in the tritium breeding prediction, and suggests a strategy to assure T self-sufficiency and mitigate the risk of a shortage or surplus of T. Scientific and/or engineering opportunity: The tritium breeding ratio (TBR) is a key metric for devices seeking T self-sufficiency. A calculated TBR above unity implies the facility breeds T at a level closely approaching or exceeding the combination of consumption, uncertainties in the TBR prediction, and T holdups, losses, decay, etc [3-6]. It is believed that ITER will consume almost all T recovered from CANDU reactors (~1.7 kg/y) [10]. Other sources of T eXist in the U.S. and abroad, but they are limited in supply, classified, uneconomical, and/or inaccessible for general use [7,8]. The cost of purchasing T is eXpensive enough to enable defining the mission of DEMO and power plants (e.g., T self-sufficiency) and designing some components around the TBR.
    [Show full text]
  • Selection of a Toroidal Fusion Reactor Concept for a Magnetic Fusion Production Reactor 1
    Journal of Fusion Energy, Vol. 6, No. 1, 1987 Selection of a Toroidal Fusion Reactor Concept for a Magnetic Fusion Production Reactor 1 D. L. Jassby 2 The basic fusion driver requirements of a toroidal materials production reactor are consid- ered. The tokamak, stellarator, bumpy torus, and reversed-field pinch are compared with regard to their demonstrated performance, probable near-term development, and potential advantages and disadvantages if used as reactors for materials production. Of the candidate fusion drivers, the tokamak is determined to be the most viable for a near-term production reactor. Four tokamak reactor concepts (TORFA/FED-R, AFTR/ZEPHYR, Riggatron, and Superconducting Coil) of approximately 500-MW fusion power are compared with regard to their demands on plasma performance, required fusion technology development, and blanket configuration characteristics. Because of its relatively moderate requirements on fusion plasma physics and technology development, as well as its superior configuration of production blankets, the TORFA/FED-R type of reactor operating with a fusion power gain of about 3 is found to be the most suitable tokamak candidate for implementation as a near-term production reactor. KEY WORDS: Magnetic fusion production reactor; tritium production; fusion breeder; toroidal fusion reactor. 1. STUDY OBJECTIVES Section 2 of this paper establishes the basic requirements that the fusion neutron source must In this study we have identified the most viable satisfy. In Section 3, we compare various types of toroidal fusion driver that can meet the needs of a toroidal fusion concepts for which there has been at materials production facility to be operational in the least some significant development work.
    [Show full text]
  • A Review of Fusion Breeder Blanket Technology Part 1 / Review and Findings
    Canadian Fusion Fuels A Review of Fusion Breeder Blanket Technology Part 1 / Review and Findings Authors DP. Jackson R.A. Verrall P.M. Garvey W.N. Selander R.L. Tapping WJ. Holtslander B.M. Townes J.S. Geiger I.J. Hastings T.C. Leung O.S. Tatone A.D. Lane J.N. Miller E.C. Carlick CFFTP GENERAL CFFTP Report Number Cross Reference Report January 1985 CFFTP-G-84033 AECL-8631 The Canadian Fusion Fuels Technology Project represents part of Canada's overall effort in fusion development. The focus for CFFTP is tritium and tritium technology. The project is funded by the governments of Canada and Ontario, and by Ontario Hydro. The Project is managed by Ontario Hydro. CFFTP will sponsor research, development and studies to extend existing experience and capability gained in handling tritium as part of the CANDU fission program. It is planned that this work will be in full collaboration and serve the needs of international fusion programs. A REVIEW OF FUSION BREEDER BLANKET TECHNOLOGY PART I: REVIEW AND FINDINGS - December 1984 Report No. CFFTP-G-84033 X-Ref Report: AECL-8631 Issue Date: January 1985 by D.P. Jackson, W.N. Selander, B.M. Townes. T.C. Leung, J.N. Miller, R.A. VerraU, R.L. Tapping J.S. Geiger, O.S. Tatone, E.G. Carlick, P.M. Garvey W.J. Holtslander, 1.3. Hastings, A.D. Lane CFFTP GENERAL 'C - Copyright Ontario Hydro. Canada-1984 Enquiries about Copyright and reproduction should be addressed to the: Program Manager.CFFTP 2700 Lakeshore Road West Mississauga, Ontario L5J 1K3* Report No.
    [Show full text]