101

HIGH INTEGRITY EARTHING - BS 7671: 1992 Regulation 607-02 TECHNICAL INFORMATION ‘High Integrity Earthing’ is a method of permanently connected to the fixed Regulation 607-02-07 requires that a making doubly sure that protection wiring. Alternatively it must be connected single item of stationary equipment with against electric shock is adequate when by an industrial plug and socket (BS EN an earth leakage current in excess of operating stationary equipment known to 60309). Where it is greater than 10 mAmps. (i) Shall be provided with a have ‘High Earth Leakage’ currents. 10 mAmps, it may be connected by a single protective conductor of not less Usually the need for extra protective plug and socket to BS EN 60309 than 10mm2 cross sectional area. measures arises when several such provided that a further separate (ii) Separate duplicated protective items are installed on a given circuit and protective conductor of not less than conductors of not less than 4mm2 and the combined leakage becomes high. It 4mm2 is connected to the fixed wiring. having independent connections. is unlikely that the normal household will (See regulation 607-02-05). (iii) Duplicate protective conductors of not need this extra requirement. less than 10 mm2 incorporated in a multi Where several pieces of equipment are core cable. The wiring regulations for buildings to be used and the combined earth (iv) Duplicate protective conductors (British standard BS 7671: - 1992) leakage will be in excess of 10 mAmps, formed by the metal conduit or the like regulation 607 states that no special there are various means of achieving and by a conductor of 2.5 mm2 cross earthing arrangements are necessary adequate protection. sectional area installed within the conduit unless the leakage current of a single and connected in parallel with it. item exceeds 3.5 mAmps or where a Regulation 607-02-06 allows for a (v) An earth monitoring device number of items have a combined dedicated ring circuit supplying a number (vi) Connection of the equipment to the leakage of more than 10 mAmps. It of socket outlets, there shall be no spurs supply by a double wound transformer or must also be recognised that high earth and the supply ends of the 1.5 mm2 other unit. The protective conductor(s) leakages (in excess of 3.5 mAmps) minimum protective conductors must be between the equipment and the will cause an RCD to operate. separately connected to the distribution transformer shall comply with one of the board. Alternatively any of the arrangements as described in (i) to The regulations allow a single item of arrangements of regulation (iv) above. equipment with a known leakage 607-02-07 may be applied. exceeding 3.5 mAmps to be

CLEAN EARTHING ARRANGEMENTS Modern ‘IT’ equipment which earth socket-outlet’ where provision is installation of a dedicated CLEAN incorporates delicate electronics are made for the connection of an additional EARTH supply is usually all that is increasingly affected by electromagnetic separate functional earthing conductor of required. For the installer where a interference (noise on the mains). equal cross-sectional area to that of the number of items of electrical equipment ring or radial protective conductors, this are being catered for, a clean earth and Whilst strict limitations are placed functional earthing conductor must also reference to regulation 607-05-01 on equipment to minimise this be connected to the earthing terminal at requires that exposed metal work of electromagnetic interference there are the . such equipment must also be earthed. many other causes of noise, such as switching, capacitance, filters and For the householder with problems of The following sketch explains the above voltage spikes, even the information electrical equipment malfunction the requirements. technology equipment itself affects other business machines on the same circuit. Ring or radial circuit earth conductor Functional earth terminal The regulations for electrical installations Dedicated (BS 7671:-1992) require that electrical Clean Earth equipment does not cause harmful effect conductor to other equipment, therefore under

regulation 607-02-01, the use of a ‘low www.clipsal.co.uk noise’ earth (CLEAN EARTH) is specified. Within the regulations where a clean Protective earth is provided it must be arranged so earth terminal (may be 2) that it is suitable for functional purposes and that protective earthing is strictly Back of socket-outlet maintained. This can only be achieved NOTE: It is of utmost importance that the correct circuit is with the installation of a dedicated ‘clean connected to the appropriate socket-outlet terminal.

Marked where applicable 102

CO-AXIAL SOCKET OUTLET Non isolated products are intended for direct connection to a single or two separate TV/FM aerial co-axial down leads. These devices must NOT be used in a multi-outlet aerial distribution system. Isolated products E31CTV & E2031CTV

are intended for such use and provide E31CTV the necessary safety isolation, rated at 2000V.a.c. against a fault occurring E31TV75 within any mains powered device used Single direct connection Communal aerial system elsewhere within the system.

BS EN 60309 - CLOCK Socket outlet / Connector viewed from front Key DIAGRAM Supply from an Earth contact position (h) isolating transformer For all the products except extra low voltage i.e. all colour codes except white ~ a.c. and violet the position given is that of the earth pin when the socket d.c. outlet/connector is viewed from the front with the keyway at the bottom.

Important Note: When viewing a plug from the front, the position of the earth pin is reversed i.e. 4h (4 o’clock) appears as 8h (8 o’clock).

E31ETR - ADJUSTABLE ELECTRONIC TIMERS Operation Moveable Link Arrangement Details Trim Pot Adjustment Details The timer turns the load ON when the To achieve different time ranges, The time delay is adjusted from the push button is initially pressed once. At rearrange the links as shown below. minimum to the maximum in the the same time the dual colour LED clockwise direction. shows green to indicate the timer is in operation. This situation remains until the preset time delay has elapsed, at which time the load turns OFF automatically and the LED changes to red to indicate the timer is now in the standby state. The red standby LED also assists the user to operate the timer in the dark.

If the push button is pressed once more before the time delay has completely elapsed, the timer will reset and again go into standby state. In other words, the timer also works like an ON-OFF www.clipsal.co.uk N NEUTRAL when the push button is successively N/O operated. LOAD P PHASE Figure E31ETR60 E31ETR720 There are two models available: 1 1-5 minutes 1-3 hours E31ETR60 - 1 - 60 minutes 2 4-20 minutes 2-6 hours E31ETR720 - 1 - 12 hours Wiring Diagram 3 15-60 minutes 4-12 hours

Marked where applicable 103

INFRASCAN - PASSIVE INFRARED SENSORS (PIR) TECHNICAL INFORMATION Clipsal Infrascans are motion sensors Infrascans can be adjusted to turn a load range performance. that provide automatic light switching for on at preset light levels, from complete Detection zones are located on four convenience and security. darkness to full sunlight. Therefore lights levels. These provide superior close are only turned on when needed. range detection coverage and a Another important benefit of Infrascans relatively high level of sensitivity to is the significant energy savings they 751 Series (Internal) movement directly towards or away offer by automatically switching the load Clipsal 751 Series Infrascans feature from the Infrascan. off when no one is occupying the a lensless design with 12 overlapping detection area. zones forming a continuous Sensor Features detection field. Clipsal Infrascans incorporate the Clipsal Infrascans use passive infrared This means that uniform sensitivity is following features as standard. (PIR) detectors to pick up body achieved across the whole of the 1. An electrostatic and electromagnetic movement to turn on lighting for a preset detection field with no dead zones (areas shield around the sensor elements period. They do this by sensing the that the Infrascan is insensitive to that reduces false tripping from radio infrared (IR) energy that is naturally movement). This feature allows wall or frequency interference (RFI). radiated by any object. ceiling mounting of the 751 Series. 2. High performance pyroelectric ceramic sensors with excellent signal Clipsal Infrascans detect the band of IR 750WP Series (External) to noise ratio (751 Series only). energy that is produced by objects that Clipsal 750WP Series Infrascans feature 3. An optical bandpass filter that are about skin temperature (approx. a multi-segmented Fresnel lens with 48 minimises unwanted light and heat 30˚C) passing through the detection detection zones. sources triggering the circuitry. zones. 4. Dual element detectors that The lens provides optical gain minimise false tripping due to rapid for achieving excellent long environmental temperature changes.

E750WPR Full Technical Specification Catalogue Numbers E750WPR GY Input Voltage 200-265 V a.c. 50Hz Maximum Load Current 10 AX Detection Method Passive infrared detection of thermal radiation Compatible Lighting Incandescent or fluorescent Time Delay 5 secs to 8 mins (nominal), infinitely Multiple PIR sensors controlling load(s) variable within this range Ambient Light Level Adjustment From full daylight to below 1 lux Detection Area 18m x 110˚ Number of Detection Zones 18 Long range 16 Intermediate range 10 Short range 4 Ultra short range Installation Height 2.4m Optimum height Single PIR sensor controlling load(s) Operating Temperature 0˚C to 50˚C Standard Colour GY - Grey

Field of view Optimum ‘Approach’ Path Note: This is a typical specification. There may be noticeable www.clipsal.co.uk differences in the range due to differing conditions such as ambient temperature, speed of movement and type of clothing worn. Side view (vertical plane)

Top view (horizontal plane)

Marked where applicable 104

E751R Full Technical Specification Catalogue Number E751R WE Input Voltage 192-264V a.c. 50Hz Maximum Load Current 10 AX Detection Method Passive infrared detection of thermal radiation Compatible Lighting Incandescent or fluorescent Time Delay 5 secs to 20mins (nominal), infinitely Single PIR sensor controlling load(s) variable within this range Ambient Light Level Adjustment From full daylight to below 1 lux Detection Area 6m x 6m, 90˚ from sensor head. Sensor head rotatable 120˚ when installed Installation Height 2.4m optimum mounting height. Unit may be wall or ceiling mounted. Other installation heights may result in decreased scanning areas. Operating Temperature 0˚C to 40˚C Multiple PIR sensors controlling load(s) Overall Dimensions 108mm diameter by 70mm high Mounting Centres 60.3, 84 and 50mm Standard Colour WE- white electric Terminals Line, load, neutral, loop Accepts 3 x 2.5mm2 cable

Note: This is a typical specification. There may be noticeable differences in the range due to differing conditions such as ambient temperature, speed of movement and type of clothing worn.

E751 Full Technical Specification Catalogue Number E751 WE Input voltage 192-264V a.c. 50Hz Maximum Load Current 2AX Minimum Load Current 20mA Detection Method Passive infrared detection of thermal radiation Compatible Lighting Incandescent or fluorescent Time Delay 5 secs to 20mins (nominal), infinitely variable within this range Ambient Light Level Adjustment From full daylight to below 1 lux Detection Area 6m x 6m, 90˚ from sensor head. Sensor head rotatable 120˚ when installed Single PIR sensor Installation Height 2.4m optimum mounting height. Unit controlling load(s) may be wall or ceiling mounted. Other installation heights may result in decreased scanning areas. Leakage Current in the OFF State 2.0mA (max) @ 25˚C Operating Temperature Range 0˚C to 40˚C Overall Dimensions 108mm diameter by 70mm high

www.clipsal.co.uk Mounting Centres 60.3, 84 and 50mm Standard Colour WE- white electric Terminals Line, load, 2 x loop Accepts 3 x 2.5mm2 cable

Note: This is a typical specification. There may be noticeable differences in the range due to differing conditions such as ambient temperature, speed of movement and type of clothing worn.

Marked where applicable 105

56 & WEATHERPROOF TECHNICAL INFORMATION CHEMICAL RESISTANCE It is well documented that Clipsal’s used which require special properties, standard grey (GY) products are ideal for Clipsal offers a chemical resistant orange most applications, however, for those (RO) range as an option. environments where harsh chemicals are

CHEMICAL COMPARISONS Product type All mounting Grey Resistant (colour) enclosures Transparent Orange (RO) (i.e. Back boxes) Covers & plugs Covers & plugs ACIDS Weak Solutions Hydrochloric 10% A A A Nitric 10% A A A Concentrate Sulphuric 100% A C C Alkalis Weak Solutions SodiumHydroxide 10% (Caustic Soda) A C B Concentrate Potassium Hydroxide 100% A-B C C AUTOMOTIVE Petroleum A C A Lubricating Oils C A Hydraulic oil C A SOLVENTS Aliphatic Hydrocarbons (Alkanes) Methane B A A Propane A A A Alcohols Ethylene Glycol A A A Glycol (Glycerin) A C B Methyl Alcohol (Methanol) A C B Ethyl Alcohol (Ethanol) A A A Amines Aniline C C C Aromatic Hyrocarbons Methyl Benzene C C B Xylene C C B Ethers Dimethyl Ethyl A A A Ketones Acetone A C C Acetophenone C C C Ethyl Methyl Ketone C C C MISCELLANEOUS Detergent A A A Inorganic salts Magnesium Sulphate A A A Oxidising Agents Weak Solution Sodium Hydrochlorite 5% A A A Strong Solution Hydrogen Peroxide 30% A A A Water Ambient A A A www.clipsal.co.uk Hot > 60˚C C A B Steam C C C Key A:- Recommended - No Adverse effects after extended exposure B:- Good - Minimal loss of mechanical properties after long periods of exposure C:- Not Recommended - Not recommended for use

Note: This table should be used as a guide only. Any end user should test to evaluate suitability of any chemical with any plastic material.

Marked where applicable Marked where applicable Marked where 1 Module enclosure Dimensions in mm 1 Module switch 4 Modules Mounting boxes (enclosures) range in Mounting boxes (enclosures) 1 gang to 4 gang as size from 4 gang (vertical), 6,8,9 and 16 standard, One gangs available by special order. 56 Module equals 1 gang. 3 Modules 2 Modules 1 Module The 56 series has been specifically designed to ‘mix & match’ to suit the of different varied requirements applications. 56 MODULAR SYSTEM Note: refer to only, Use this table for guidance BS EN 60529 for full information. The vast majority of the products shown of the products The vast majority carry an IPin this catalogue (international rating). This notation signifies protection its for the suitability of the product first digit gives intended application. The against the of protection the degree solids (i.e. dust particles) and of ingress protection of the second digit the degree of liquids. against the Ingress INTERNATIONAL (IP) PROTECTION 60529 - BS EN RATINGS

www.clipsal.co.uk

TECHNICAL INFORMATION 106 INDEX www.clipsal.co.uk 107 46 30/1SM WE30/2SM WE30MI WE30M20 WE30M35 WE30MD15 WE Switch-mechanism only30MD20 WE Switch-mechanism only30P WE32E275M WE Switch intermediate-mechanism only32E400M WE Switch-mechanism only30MBP WE Switch-mechanism only DP switch-mechanism only 47 30MBPR WE DP switch-mechanism only 47 47 only Dimmer-mechanism Blanking insert only Dimmer-mechanism 47 47 Bell press-mechanism only 47 only Bell press rocker-mechanism 47 47 47 47 47 47 E2032/2SA WEE2033/2SA WEE2034/2SA WEE2031L2/3A WEE2032L2/3A WE PlateswitchE2031RD4 WE PlateswitchE2032RD25 WE Plateswitch WEE2031RD250LV dolly (Mega) Plateswitch-large WEE2032RD160LV dolly (Mega) Plateswitch-large E2030T6A WE Dimmer switch - rotaryE2342/6 WE Dimmer switch - rotary Dimmer switch - rotaryE2031ETR60 WE Dimmer switch - rotary 41 E2031ETR720 WE 41 E2031IA WE WEE2031BPA isolator switch 6A Fan 41 E2031BPRA WE DP time switch - electronic 41 Pull cord switch EA2031/2SA WE DP time switch - electronic 41 41 41 EA2032/2SA WE 41 41 E2406/1M WE Switch-intermediateE2406/1S WE Plateswitch-bell press (push) (rocker) Plateswitch-bell press E2031TV WE Plateswitch-architrave 42 41 E2032TV WE 42 Plateswitch-architraveE2031CTV WEE2032TV75FM WE outlet - master Telephone 42 42 41 E2030X WE outlet - secondary Telephone ET2030X WE TV socket outlet-coaxial 42 E2031 WE TV socket outlet-coaxial TV/FM socket outlet E2032 WE outlet-isolated coaxial TV socket 42 E2033 WE 42 42 42 E2034 WE Blank plateET2036 WE Blank plate 42 EA2031 WE 42 EA2032 WE Switchplate 42 E2000C SE SwitchplateET2000C SE 43 SwitchplateE2000C GE Switchplate SwitchplateET2000C GE (architrave) Switchplate E2000C BW (architrave) Switchplate ET2000C BWE2000C GM E2000 replacement frame 43 E2000 replacement frameET2000C GM 43 E2000 replacement frameE2000C UE E2000 replacement frame 43 ET2000C UE frame E2000 replacement 43 43 E2000 BRG frame E2000 replacement 43 43 ET2000 BRG 43 E2000 replacement frame 43 E2000 VI 43 E2000 replacement frame 43 ET2000 VI 44 E2000 replacement frameE2000 GY 44 E2000 replacement frameET2000 GY 44 E2000 replacement frameE2000 PS 44 E2000 replacement frameET2000 PS 44 E2000 SB 44 E2000 replacement frameET2000 SB E2000 replacement frame 44 E2000 DB 44 E2000 replacement frame E2000 replacement frameET2000 DB 44 E2000 RD 44 E2000 replacement frameET2000 RD E2000 replacement frameE2000 YL 44 E2000 replacement frame 44 ET2000 YL E2000 replacement frame 45 E2000 replacement frame 45 E2000 replacement frame 45 E2000 replacement frame 45 E2000 replacement frame 45 E2000 replacement frame 45 E2000 replacement frame 45 45 45 45 45 45 Electrical Accessories - Mechanisms 37 38 2 3 4 8 14 Energy Management System andalume andaguard andadisc andasquare resistant T8 Vandal resistant T8 Vandal resistant bulkhead TC-D Vandal resistant bulkhead TC-D Vandal 28 28 26 27 andanova Bulkhed HIDTC-Dandanova Bulkhed andabulk Bulkhead 24 25 ownhouse Surface 2DSurface ownhouse 15 E750WPR GYE751 WEE751R WEE751JS WE Passive infra red sensor -relayE2015 WE Passive infra red sensor (internal)ET2025 WE (internal) Passive infra red sensor-relay E2015D WE Passive infra red sensor (isolated) 37 37 ET2025D WE 37 E2426 WEET2426 WEET2727 WE Switched socket outlet 37 Switched socket outletE2426/16 WE Switched socket outletE2030FSG WE Switched socket outlet-high integrityE2030FSGMS WEE2030FSGS WE Socket outlet-unswitched Socket outlet-unswitched 39 E2030NFSGS WE Universal shaver supply unit (dual voltage)E2031DFSG WE Socket outlet-unswitched (Schuko) 39 39 E2031DFSGMS WE connection unit Fuse connection unit 39 E2031DFSGS WE 39 Fuse connection unitE2031DFSGN WE Fuse connection unit 39 E2031DNFSGS WE 39 Switched fuse connection unit Switched fuse connection unit 39 E2031D20GEA WEE2031D45N WE Switched fuse connection unit E2015DR45N WE Switched fuse connection unit Switched fuse connection unit E2031TB WE 39 39 40 DP switch 40 E2031EKT WE 39 E2031EKT/KC WE 39 40 45A DP cooker switchE2031/1SA WE Cooker control unit 40 E2031/2SA WE 40 25A TP connection unit SP keytag switch Key for E2031EKT Plateswitch Plateswitch 40 40 40 40 40 40 40 41 Electrical Accessories - E 2000 Energy Management & Control Budget Floods Midi Flood Style Mini Flood Style Maxi Flood 1kw/2kw Polycarbonate mini flood HID Polycarbonate mini flood HID Aluminium flood HID Polycarbonate maxi flood HID 32 1kw/2kw flood HID Aluminium 34 35 33 36 Floodlights Amenity & Security V V V V Packlite Parkwatt SSHZ mount bulkhead HID Wall Ceiling mount bulkhead HID Stainless fluorescent T8 29 30 31 PWP Non-corrosive IP6522IP66LL Lowbay Econolite HL PWP Non-corrosive SDW Non-corrosive 23 V V Lowbay HID Highbay HID 20 21 Industrial & Adverse Industrial & Adverse Indoor Commercial T CTL/CTX SMM/SMDP Modular Downlight Surface linear louvre T5/T8 Surface linear T8 diffused Recessed louvre T5/T8 Recessed downlight TC-D 17 16 19 18 C-Bus Lighting Contents Contents New What’s Introduction 60 E1920/30 WEE1920/30MI WEE1920/30 BKE1920/30MI BKE1920R30 WEE1920R30MI WE Switch polished brass Switch-intermediate polished brassE1920R30 BKE1920R30MI BK Switch polished brass polished brass Switch-intermediate E1920A30 WE 61 E1920A30MI WE Switch polished brass Switch-intermediate polished brassE1920A30 BK 61 E1920A30MI BK Switch polished brass Switch-intermediate polished brassE1920AR30 WE 61 61 E1920AR30MI WE Switch antique brass Switch-intermediate antique brassE1920AR30 BK 61 61 E1920AR30MI BK Switch antique brass Switch-intermediate antique brass 61 E1920C30 WE 61 Switch antique brass Switch-intermediate antique brassE1920C30MI WE 61 E1920C30 BK 61 Switch antique brassE1920C30MI BK Switch-intermediate antique brassE1920CR30 WE 62 61 E1920CR30MI WE Switch chrome Switch-intermediate chromeE1920CR30 BK 62 61 E1920CR30MI BK Switch chrome Switch-intermediate chrome 62 E1920MBR1 PN Switch chrome Switch-intermediate chromeE1920MBO2 PN 62 62 Switch chrome Switch-intermediate chrome 62 Mounting block pine Mounting block pine 62 62 62 62 62 62 63 63 32A WEE30T6A WEE319 WEE31ETR60 WEE31KTE31ETR720 WEE3406/1M WEE3406/1S WE 6A fan isolator switch Plateswitch-architraveET01 WEE31CTV WE DP time switch - electronic delay switch - pneumatic Time DP time switch - electronicE31TV75 WEE31KT WE outlet - master Telephone Key-Fits EKT outlet - secondary Telephone 55 E32TV75 WE 55 E32TV75FMS WE 55 55 outlet (US. style) Telephone 55 TV socket outlet-isolated coaxial 55 E31X WE outlet-coaxial TV socket E31/2X WE 55 55 E449AS WE DP keytag switch (key not supplied)EP2 WE socket outlet TV/FM 55 outlet-coaxial TV socket EP5 WE 55 55 EP15 WEEP13 TR plate Blank 55 Blank plateEP13 WE pattress Conversion E238SE WEE238 WE 56 Round pin plugE238E WE 56 Round pin plugET238 WE Round pin plugE238/2 WE Plug70/1 WE Plug box (moulded) Surface mounting 70/2 WE158 56 Surface mounting box (moulded)158/2 Surface mounting box (moulded) 56 56 E94 WE Surface mounting box (moulded) 56 E93PS6 WE Surface mounting dual box (moulded) 56 E93PS9 WE 56 56 Architrave surface mounting box (moulded) 57 E93 WE 56 57 57 Architrave surface mounting box (moulded) 57 E501SS WE 57 E31 WEE32 WE Architrave flush mounting box (metal) Architrave flush mounting box (metal) Pendant set 6 T2 rated BC batten lampholder T2 ratedE33 WE 56 Pendant set 9 T2 ratedE34 WE 57 56 57 E35 WE lampholder T2 rated BC pendant Ceiling roseET36 WEE31WP WE 57 Switchplate31 WE Switchplate32 WE 57 57 Switchplate 57 Switchplate Switchplate Switchplate Switchplate (splashproof) Switchplate (architrave) 57 Switchplate (architrave) 58 58 58 58 58 58 58 58 58 Classic 50 E25/1 BP WEE25DF3/2BP WEGEL4/2MEXL WE E15 WEE25 WEE15D WE single to double ”CONVERTA” double to triple ”CONVERTA” E25D WE Extension LeadE426 WEET426 WEE25SF WE 51 Switched socket outletE25CESF WE 51 Switched socket outletE25X WE socket outlet DP switched E426/2 WE socket outlet-high integrity DP switched E426/5 WE Socket outlet-unswitchedE426/15 WE 51 Socket outlet-unswitched 51 E426/16 WE Socket outlet-surge/ filter with clean earth Socket outlet-surge/ filter E727 WE 51 51 E30FSG WE 51 51 Socket outlet + mechanism apertureE30FSGMS WE Socket outlet-unswitchedE30FSGS WE Socket outlet-unswitched 51 Socket outlet-unswitchedE30NFSGS WE 51 51 Socket outlet-unswitched (Schuko) 51 E31DFSG WEE31DFSGMS WE Universal shaver supply unit (dual voltage) Fuse connection unit Fuse connection unitE31DFSGS WE 52 52 52 E31DNFSG WE Fuse connection unit 52 Fuse connection unitE31DNFSGS WE 52 E31D20GE WE Switched fuse connection unit Switched fuse connection unit E32D20NGE WE Switched fuse connection unit ED45N WE Switched fuse connection unit ED45/13N WE Switched fuse connection unit 52 52 E554 WE 52 52 DP switchE31TB WE 52 DP switch E31/1SA WE 52 52 E31/2SA WE 53 53 E32/2SA WE 45A DP cooker switch Cooker control unitE33/2SA WEE34/2SA WE Cooker connection unitE35/2SA WE 25A connection unit PlateswitchE31PD400 WE PlateswitchE32E400 WE PlateswitchE31RD400 WE Plateswitch 53 E32RD250 WE 53 Plateswitch 53 53 WEE31RD250LV Plateswitch WEE32RD160LV 53 Dimmer switch - push on/ offE31IA WE 53 Dimmer switch soft start - rotary WE Dimmer switch - rotaryE31BPA Dimmer switch - rotaryE31WP2/3SA WE Dimmer switch - rotary30 WE Dimmer switch - rotary 53 54 54 53 53 Switch-splashproof 53 Switch-intermediate Plateswitch-bell press 54 54 54 54 54 54 Plateswitch-architrave 54 54 54 54 Electrical Accessories - E Series 30FS WE30TKM WE30PID WE30TV75MS WE30PFM WE38HD WE38TB WE only carrier (BS1362)-mechanism Fuse only Switch key-mechanism 39M WE socket-mechanism only Coaxial 30RSM2 WE Identification insert 48 30SFM OP only Coaxial socket-mechanism 30RJ88SMA5 WE30RJ88SMT WE only Coaxial socket-mechanism 48 48 30RJ88SMD WEoutlet-mechanism only Flex 30RJ84SM WE Flex outlet-mechanism only Flex outlet-mechanism only 48 30RJ64SM WE only Communications-mechanism 30RJ88SMA5SH WE only Surge/filter-mechanism 48 only Communications-mechanism 48 30N RD only Communications-mechanism 30N AM 48 48 only Communications-mechanism 30N GR only Communications-mechanism 48 48 48 Communications-mechanism only30N BU 49 48 30N TR30TK-3 N/A 49 49 31J N/A 49 only Neon indicator-mechanism onlyindicator-mechanism Neon only Neon indicator-mechanism only Neon indicator-mechanism 49 Key-spare for 30TKM only Neon indicator-mechanism 49 49 Security screw-for mechanisms 49 49 49 49

www.clipsal.co.uk

INDEX 108 109 INDEX

E1920MB1 PN Mounting block pine 63 ENDKIT TP&N neutral disconnection kit 71 E1920MB2 PN Mounting block pine 63 EKEYLOCK TP&N key locking kit 71 E1920MB3 PN Mounting block pine 63 E200ATK TP&N direct termination kit 71 E1920MB4 PN Mounting block pine 63 ECEK1 TP&N clean earth kit 71 E1920MBR1 CD Mounting block cedar 63 CT2 Enclosure 71 E1920MBO2 CD Mounting block cedar 63 CT4 Enclosure 71 E1920MB1 CD Mounting block cedar 63 CT3G Enclosure weatherproof71 E1920MB2 CD Mounting block cedar 63 CT5G Enclosure weatherproof71 E1920MB3 CD Mounting block cedar 63 CT8G Enclosure weatherproof71 E1920MB4 CD Mounting block cedar 63 CT12G Enclosure weatherproof71 E1920MBR1 UC Mounting block primed 64 EB1 Blanking plate for metal enclosures 71 E1920MBO2 UC Mounting block primed 64 TSB106 MCB 6A 10kA 1DIN mod 50/60Hz 72 E1920MB1 UC Mounting block primed 64 TSB110 MCB 10A 10kA 1DIN mod 50/60Hz 72 E1920MB2 UC Mounting block primed 64 TSB116 MCB 16A 10kA 1DIN mod 50/60Hz 72 E1920MB3 UC Mounting block primed 64 TSB120 MCB 20A 10kA 1DIN mod 50/60Hz 72 E1920MB4 UC Mounting block primed 64 TSB125 MCB 25A 10kA 1DIN mod 50/60Hz 72 E1920MBA1 BK Adapter plate-spare for E1920MB 64 TSB132 MCB 32A 10kA 1DIN mod 50/60Hz 72 E1920MBA2 BK Adapter plate-spare for E1920MB 64 TSB140 MCB 40A 6kA 1DIN mod 50/60Hz 72 363 BR Switch-surface mounted 64 TSB150 MCB 50A 6kA 1DIN mod 50/60Hz 72 363 WE Switch-surface mounted 64 TSB163 MCB 63A 6kA 1DIN mod 50/60Hz 72 360 BK Switch-foot operated 64 TSB206 MCB 6A 10kA 2DIN mods 50/60Hz 72 360 WE Switch-foot operated 64 TSB210 MCB 10A 10kA 2DIN mods 50/60Hz 72 TSB216 MCB 16A 10kA 2DIN mods 50/60Hz 72 Circuit Protection 66 TSB220 MCB 20A 10kA 2DIN mods 50/60Hz 72 TSB225 MCB 25A 10kA 2DIN mods 50/60Hz 72 ECU4A Insulated consumer unit with isolator 67 TSB232 MCB 32A 10kA 2DIN mods 50/60Hz 72 ECU6B Insulated consumer unit with isolator 67 TSB240 MCB 40A 6kA 2DIN mods 50/60Hz 72 ECU8B Insulated consumer unit with isolator 67 TSB250 MCB 50A 6kA 2DIN mods 50/60Hz 72 ECU12C Insulated consumer unit with isolator 67 TSB263 MCB 63A 6kA 2DIN mods 50/60Hz 72 ECUR4A Insulated consumer unit with RCD 67 TSB306 MCB 6A 10kA 3DIN mods 50/60Hz 72 ECUR6B Insulated consumer unit with RCD 67 TSB310 MCB 10A 10kA 3DIN mods 50/60Hz 72 ECUR8B Insulated consumer unit with RCD 67 TSB316 MCB 16A 10kA 3DIN mods 50/60Hz 72 ECUR10C Insulated consumer unit with RCD 67 TSB320 MCB 20A 10kA 3DIN mods 50/60Hz 72 ECUR12C Insulated consumer unit with RCD 67 TSB325 MCB 25A 10kA 3DIN mods 50/60Hz 72 ECUSC Insulated split load consumer unit 67 TSB332 MCB 32A 10kA 3DIN mods 50/60Hz 72 ECUSC/63 Insulated split load consumer unit 67 TSB340 MCB 40A 6kA 3DIN mods 50/60Hz 72 GARAGE Insulated consumer unit + 6 &16A MCB’s 67 TSB350 MCB 50A 6kA 3DIN mods 50/60Hz 72 GARAGE/40 Insulated consumer unit + 6 &16A MCB’s 68 TSB363 MCB 63A 6kA 3DIN mods 50/60Hz 72 ECUM5 Metal-clad consumer unit with isolator 68 TSC1005 MCB 0.5A 10kA 1DIN mod 50/60Hz 73 ECUM6 Metal-clad consumer unit with isolator 68 TSC101 MCB 1A 10kA 1DIN mod 50/60Hz 73 ECUM8 Metal-clad consumer unit with isolator 68 TSC102 MCB 2A 10kA 1DIN mod 50/60Hz 73 ECUM12 Metal-clad consumer unit with isolator 68 TSC104 MCB 4A 10kA 1DIN mod 50/60Hz 73 ECUM16 Metal-clad consumer unit with isolator 68 TSC106 MCB 6A 10kA 1DIN mod 50/60Hz 73 ECUMR5 Metal-clad consumer unit with RCD 68 TSC110 MCB 10A 10kA 1DIN mod 50/60Hz 73 ECUMR6 Metal clad consumer unit with RCD 68 TSC116 MCB 16A 10kA 1DIN mod 50/60Hz 73 ECUMR8 Metal clad consumer unit with RCD 68 TSC120 MCB 20A 10kA 1DIN mod 50/60Hz 73 ECUMR12 Metal clad consumer unit with RCD 68 TSC125 MCB 25A 10kA 1DIN mod 50/60Hz 73 ECUMR16 Metal clad consumer unit with RCD 68 TSC132 MCB 32A 10kA 1DIN mod 50/60Hz 73 ECUSM3R7 Metal-clad split load consumer unit 68 TSC140 MCB 40A 6kA 1DIN mod 50/60Hz 73 ECUSM4R6 Metal-clad split load consumer unit 69 TSC150 MCB 50A 6kA 1DIN mod 50/60Hz 73 ECUSM5R5 Metal-clad split load consumer unit 69 TSC163 MCB 63A 6kA 1DIN mod 50/60Hz 73 ECUSM6R4 Metal-clad split load consumer unit 69 TSC201 MCB 1A 10kA 2DIN mods 50/60Hz 73 ECUSM7R3 Metal-clad split load consumer unit 69 TSC202 MCB 2A 10kA 2DIN mods 50/60Hz 73 EME2 Metal-clad enclosure69 TSC204 MCB 4A 10kA 2DIN mods 50/60Hz 73 EME4 Metal-clad enclosure69 TSC206 MCB 6A 10kA 2DIN mods 50/60Hz 73 EMED4 Metal-clad enclosure with door 69 TSC210 MCB 10A 10kA 2DIN mods 50/60Hz 73 EMEE4 Metal-clad enclosure(extended)69 TSC216 MCB 16A 10kA 2DIN mods 50/60Hz 73 EMECD6 Metal-clad enclosure with clear door 69 TSC220 MCB 20A 10kA 2DIN mods 50/60Hz 73 EMECD8 Metal-clad enclosure with clear door 69 TSC225 MCB 25A 10kA 2DIN mods 50/60Hz 73 EMECD10 Metal-clad enclosure with clear door 69 TSC232 MCB 32A 10kA 2DIN mods 50/60Hz 73 EMECD12 Metal-clad enclosure with clear door 69 TSC240 MCB 40A 6kA 2DIN mods 50/60Hz 73 ETPNB4 TP&N (less incomer) 70 TSC250 MCB 50A 6kA 2DIN mods 50/60Hz 73 ETPNB6 TP&N distribution board (less incomer) 70 TSC263 MCB 63A 6kA 2DIN mods 50/60Hz 73

ETPNB8 TP&N distribution board (less incomer) 70 TSC301 MCB 1A 10kA 3DIN mods 50/60Hz 73 www.clipsal.co.uk ETPNB12 TP&N distribution board (less incomer) 70 TSC302 MCB 2A 10kA 3DIN mods 50/60Hz 73 ETPNB16 TP&N distribution board (less incomer) 70 TSC304 MCB 4A 10kA 3DIN mods 50/60Hz 73 EIK100 TP&N incomer kit-switch 70 TSC306 MCB 6A 10kA 3DIN mods 50/60Hz 73 EIK200 TP&N incomer kit-switch disconnector 70 TSC310 MCB 10A 10kA 3DIN mods 50/60Hz 73 EIKMA TP&N universal incomer kit-RCD 70 TSC316 MCB 16A 10kA 3DIN mods 50/60Hz 73 EIK100MA TP&N incomer kit with RCD 70 TSC320 MCB 20A 10kA 3DIN mods 50/60Hz 73 EIK300MA TP&N incomer kit with RCD 70 TSC325 MCB 25A 10kA 3DIN mods 50/60Hz 73 ESPK1 TP&N single phase kit 70 TSC332 MCB 32A 10kA 3DIN mods 50/60Hz 73 EIGPK TP&N gland plate-insulated (replacement) 70 TSC340 MCB 40A 6kA 3DIN mods 50/60Hz 73 ELBGP1 TP&N gland plate-steel (replacement) 71 TSC350 MCB 50A 6kA 3DIN mods 50/60Hz 73 82 56SW110LE GY 56SW115LE GY 56SW110/2LE GY 56SW115/2LE GY 56SW110/ILE GY SP 250V 10A AC21 1 way 1 mod 50Hz 56SW120LE GY SP 250V 15A AC21 1 way 1 mod 50Hz SP 250V 10A AC21 2 way 1 mod 50Hz 83 56SW132LE GY SP 250V 15A AC21 2 way 1 mod 50Hz II 83 56SW220LE GY 83 83 SP 250V 10A AC21 inter 1 mod 50Hz 56SW232LE GY 56SW263LE GY SP 250V 20A AC23 1 way 1 mod 50Hz 83 56SW310LE GY SP 250V 32A AC22 1 mod 50Hz 83 56SW320LE GY DP 500V 20A AC23 1 mod 50Hz 56SW332LE GY DP 500V 32A AC22 1 mod 50Hz 56SW363LE GY DP 500V 63A AC22 1 mod 50Hz 83 56SW420LE GY TP 500V 10A AC23 1 mod 50Hz 83 56SW320CLE GY TP 500V 20A AC23 1 mod 50Hz 83 56SW332CLE GY TP 500V 32A AC22 1 mod 50Hz 83 56SW363CLE GY TP 500V 63A AC22 1 mod 50Hz 83 56SW420CLE GY 4P 415V 20A AC23 1 mod 50Hz 83 TP 500V 20A AC23 1 mod 50Hz 56SW363/2LE GY TP 500V 32A AC22 1 mod 50Hz 56SW120RKLE GY 83 TP 500V 63A AC22 1 mod 50Hz 56SW132RKLE GY 83 83 4P 415V 20A AC23 1 mod 50Hz 56SW220RKLE GY 83 TP 500V 63A AC22 1 mod 50Hz 56SW232RKLE GY SP 250V 20A AC23 1 mod 50Hz 83 56SW320RKLE GY 83 SP 250V 32A AC22 1 mod 50Hz 56SW332RKLE GY 83 DP 500V 20A AC23 1 mod 50Hz 56SW420RKLE GY DP 500V 32A AC22 1 mod 50Hz 83 83 56K2SW120LE GY TP 500V 20A AC23 1 mod 50Hz 83 56K2SW132LE GY TP 500V 32A AC22 1 mod 50Hz 83 56K2SW220LE GY 4P 415V 20A AC23 1 mod 50Hz 56K2SW232LE GY 83 SP 250V 20A AC23 1 mod 50Hz 56K2SW263LE GY 83 SP 250V 32A AC22 1 mod 50Hz 56K2SW320LE GY 83 DP 500V 20A AC23 1 mod 50Hz 83 DP 500V 32A AC22 1 mod 50Hz 83 DP 500V 63A AC22 1 mod 50Hz 83 TP 500V 20A AC23 1 mod 50Hz 83 83 83 83 Industrial Switchgear - 56 Series T16 Switch-stairway lighting 78 79 lighting lighting WDT/30 Switch-stairwayT16 Switch-stairwayT16G RCD001 A1 A2 A3 clock digital Time AS1 blockAS2 blockAS15 block Plug-in RCD adaptorAS25 blockAS35 blockAS45 box (round),press fit lid Adaptable AS55 box (round),press fit lid Adaptable TCF box (square),press fit lid Adaptable 78 box, screw fit lid Adaptable Terminal M04 79 box, screw fit lid Adaptable Terminal M08 80 79 box, screw fit lid Adaptable 79 Terminal M10 79 80 box, screw fit lid Adaptable Terminal M12 80 box, screw fit lid Adaptable M14 Terminal 80 Adaptable box, screw fit lid 79 CTR3 80 Adaptable box, screw fit lid 79 CTR4 79 Blanking plate, stripCTR5 79 S1L1000/10 Phasebar-insulated 79 S1L1000/16 Phasebar-insulated 79 S3L1000/10 Phasebar-insulated 79 S3L1000/16 Phasebar-insulatedG1L1000/10 Phasebar-insulated block support to fit CT5G Terminal G1L1000/16 Phasebar-insulated block support to fit CT8G-CT12G Terminal G1L90/16 Phasebar-insulated 80 cap block support to fit CT3G Terminal 80 G1L126/16 Phasebar-insulated 80 80 G1L162/16 Phasebar-insulated 80 G1L198/16 Phasebar-insulated 80 80 G1L210/16 Phasebar-insulated 81 G1L228/16 Phasebar-insulated 81 G3L1000/10 Phasebar-insulated 81 G3L1000/16 Phasebar-insulated 81 GA1 Phasebar-end 81 81 81 81 81 81 81 81 TSC363 TSD101 TSD102 TSD104 TSD106 TSD110 TSD116 63A 6kA 3DIN mods 50/60Hz MCB TSD120 1A 10kA 1DIN mod 50/60Hz MCB TSD125 2A 10kA 1DIN mod 50/60Hz MCB TSD132 4A 10kA 1DIN mod 50/60Hz MCB 73 TSD201 6A 10kA 1DIN mod 50/60Hz MCB 74 TSD202 10A 10kA 1DIN mod 50/60Hz MCB 74 TSD204 16A 10kA 1DIN mod 50/60Hz MCB 74 TSD206 20A 10kA 1DIN mod 50/60Hz MCB 74 TSD210 74 25A 10kA 1DIN mod 50/60Hz MCB TSD216 74 32A 10kA 1DIN mod 50/60Hz MCB TSD220 74 1A 10kA 2DIN mods 50/60Hz MCB TSD225 74 2A 10kA 2DIN mods 50/60Hz MCB TSD232 74 4A 10kA 2DIN mods 50/60Hz MCB TSD301 74 6A 10kA 2DIN mods 50/60Hz MCB TSD302 74 10A 10kA 2DIN mods 50/60Hz MCB TSD304 74 16A 10kA 2DIN mods 50/60Hz MCB TSD306 74 20A 10kA 2DIN mods 50/60Hz MCB 74 TSD310 disconnector 25A 10kA 2DIN mods 50/60Hz MCB TSD316 74 32A 10kA 2DIN mods 50/60Hz MCB disconnector 74 TSD320 1A 10kA 3DIN mods 50/60Hz MCB disconnector 74 TSD 325 MCB 2A 10kA 3DIN mods 50/60Hz 74 TSD332 4A 10kA 3DIN mods 50/60Hz MCB TF220008 74 6A 10kA 3DIN mods 50/60Hz MCB HSC10X38 Fuse 74 10A 10kA 3DIN mods 50/60Hz MCB HSC10X38/2 Fuse 74 MCB 16A 10kA 3DIN mods 50/60Hz 75 HSC10X38/3 Fuse 74 MCB 20A 10kA 3DIN mods 50/60HzT2216010 74 25A 10kA 3DIN mods 50/60Hz MCB 75 T2225030S 74 75 MCB 32A 10kA 3DIN mods 50/60HzT2240030S Bell transformer 8 volt 74 T2263030S 74 T2280030S 74 T2225100S T2240100S RCD DP 230/400V 16A 10mA 10kA 2DIN RCD DP 230/400V 25A 30mA 10kA 2DINT2263100S RCD DP 230/400V 40A 30mA 10kA 2DIN 75 T2280100S 75 75 RCD DP 230/400V 63A 30mA 10kA 2DINT4425030S 75 RCD DP 230/400V 80A 30mA 10kA 2DINT4440030S 75 RCD DP 230/400V 25A 100mA 10kA 2DINT4463030S 75 RCD DP 230/400V 40A 100mA 10kA 2DIN 75 T4480030S RCD DP 230/400V 63A 100mA 10kA 2DIN 75 T4425100S RCD DP 230/400V 80A 100mA 10kA 2DIN 75 T4440100S RCD 4P 230/400V 25A 30mA 10kA 4DIN 76 T4463100S RCD 4P 230/400V 40A 30mA 10kA 4DINT4480100S 76 RCD 4P 230/400V 63A 30mA 10kA 4DINTCU6 76 RCD 4P 230/400V 80A 30mA 10kA 4DINTCU10 76 RCD 4P 230/400V 25A 100mA 10kA 4DINclockTCU16 76 RCD 4P 230/400V 40A 100mA 10kA 4DINTCU20 76 clock RCD 4P 230/400V 63A 100mA 10kA 4DINclockTCU25 76 RCD 4P 230/400V 80A 100mA 10kA 4DINTCU32 76 clockclockTCU40 76 TIS2100S clock RCBO DP 110/230V 6A 30mA 4.5kA 2DINTIS3100S RCBO DP 110/230V 10A 30mA 4.5kA 2DINclock 76 AD240 Time 76 RCBO DP 110/230V 16A 30mA 4.5kA 2DINclock AQD240 Time 76 RCBO DP 110/230V 20A 30mA 4.5kA 2DINclock-digital AS240 Time 77 RCBO DP 110/230V 25A 30mA 4.5kA 2DINclock-digital 77 AQS240 Time 77 RCBO DP 110/230V 32A 30mA 4.5kA 2DIN D240 Time 77 RCBO DP 110/230V 40A 30mA 4.5kA 2DIN Switch disconnector 100A 25kA 2DIN 77 77 UD240 Time 77 Switch disconnector 100A 25kA 3DIN UQD240 Time 77 77 77 UQS240 Time 77 77 DM2240 Time DM1240 Time 78 78 CPU35U 78 78 CPU35WU CPU35W2U CPU72U CPU72WU DDT/30 clock digital Time clock digital Time clock digital Time clock digital Time clock digital Time clock digital Time 78 78 78 78 78 78

www.clipsal.co.uk

INDEX 110 111 INDEX 56K2SW332LE GY TP 500V 32A AC22 1 mod 50Hz 83 56C313/2/4EL GY RCD socket outlet with enclosure 90 56K2SW363LE GY TP 500V 63A AC22 1 mod 50Hz 83 56SW120LE RO SP 250V 20A AC23 1Way 1mod 50Hz 90 56SW320RLE GY Switch-reversing 84 56SW220LE RO DP 500V 20A AC23 1mod 50Hz 90 56SW220COLE GY Switch-changeover 84 56SW232LE RO DP 500V 32A AC22 1mod 50Hz 90 56SW420COLE GY Switch-changeover 84 56SW320LE RO TP 500V 20A AC23 1mod 50Hz 90 56SSW15LE GY Switch-slide action 84 56SW332LE RO TP 500V 32A AC22 1mod 50Hz 90 56SSW2/15LE GY Switch-slide action 84 56SW363LE RO TP 500V 63A AC22 1mod 50Hz 90 56/2PBLE GY Push button station 84 56SW320CLE RO TP 500V 20A AC23 1mod 50Hz 90 56PBS1LE GY Push button station 84 56PBS1LE RO Push button station 90 56/2PBS1LE GY Push button station 84 56SO313LE RO Socket outlet 90 56TCDBLE GY Timer-digital 84 56P313 RO Plug 90 56WL GY Wall light-surface mount (PL5-PL7 lamp) 84 56ES1 RO Enclosure (surface mounting box) 91 56FWL Wall light-flush mount (PL5-PL7 lamp) 84 56E1 RO Enclosure (surface mounting box) 91 56SO313LE GY Socket outlet surface (straight) 84 56E2 RO Enclosure (surface mounting box) 91 56SO316/4LE GY Socket outlet surface (BS EN 60309) 85 56ES2 RO Enclosure (surface mounting box) 91 56SO316/6LE GY Socket outlet surface (BS EN 60309) 85 56SO416/6LE GY Socket outlet surface (BS EN 60309) 85 Weather Protected Isolators & 92 56S0516/6LE GY Socket outlet surface (BS EN 60309) 85 56SO332/6LE GY Socket outlet surface (BS EN 60309) 85 WS226 GY Switch-slide action - weatherproof 93 56SO432/6LE GY Socket outlet surface (BS EN 60309) 85 WS226/2 GY Switch-slide action - weatherproof 93 56SO532/6LE GY Socket outlet surface (BS EN 60309) 85 WSR226 GY Switch-slide action - weatherproof 93 56SO310LE GY Socket outlet surface (straight) 85 WS226/2PB GY Push button station - weatherproof 93 56P313 GY Plug - straight 85 W226JB GY - weatherproof 93 56PA313 GY Plug - angled 85 WS229 GY Switch - weatherproof 93 56P310 GY Plug unfused- straight 85 WHD20 GY Switch disconnector - weatherproof 93 56SOX KIT Universal mounting kit 85 WHD35 GY Switch disconnector - weatherproof 93 56/32LE GY Switchplate only-accepts 2 mechanisms 86 WHT20 GY Switch disconnector - weatherproof 93 56A GY Adapter-to fit BSEN 60309 (16A) 86 WHT35 GY Switch disconnector - weatherproof 93 56A1 GY Adapter-to fit BSEN 60309 (16/32A) 86 WHT63 GY Switch disconnector - weatherproof 93 56A1/2 GY Adapter-to fit BSEN 60309 (Incd.16/32A) 86 008585-20 BSEN 60309 adapter-fixing screw (4per) 86 56CB1 GY Cover assembly-MCB 86 Industrial Plugs & Sockets - P6 Series 95 56CB2 GY Cover assembly-MCB 86 56CB3 GY Cover assembly-MCB 86 56RC4N GY Cover assembly-MCB 86 56CB1N GY Cover assembly-MCB 86 Technical 101 56CB2N GY Cover assembly-MCB 86 56CB3N GY Cover assembly-MCB 86 Index 107 56EL4N GY Cover assembly-RCD 87 56L1 GY Lid 87 56L2 GY Lid 87 56L3 GY Lid 87 56L4 GY Lid 87 56DL2 GY Lid 87 56DL3 GY Lid 87 56DL4 GY Lid 87 56ES1 GY Enclosure (surface mounting box) 87 56E1 GY Enclosure (surface mounting box) 87 56ES2 GY Enclosure (surface mounting box) 87 56E2 GY Enclosure (surface mounting box) 87 56ED2 GY Enclosure (surface mounting box) 88 56E3 GY Enclosure (surface mounting box) 88 56E4 GY Enclosure (surface mounting box) 88 Colour Code 56E6 GY Enclosure (surface mounting box) 88 The following codes identify the product colours used in this catalogue. 56E8 GY Enclosure (surface mounting box) 88 56E9 GY Enclosure (surface mounting box) 88 BG = Beige 56FA1 GY Flush surround 88 BK = Black 56FA2 GY Flush surround 88 BR = Burgundy 56FA3 GY Flush surround 88 BW = Natural Wood 56FA4 GY Flush surround 88 CD = Cedar 56FA1B Mounting plate-flush surround 88 DB = Deep Blue 56FA2B Mounting plate-flush surround 88 GE = Gold 56FA3B Mounting plate-flush surround 89 GM = Marble Green

56FA4B Mounting plate-flush surround 89 GY = Grey www.clipsal.co.uk 20MALE/20FEMALE Adapter-earth lead 89 PN = Pine 56B BK Bridging piece to fit enclosure 89 PS = Pink 56DV BK Divider to fit enclosure 89 RD = Red 56JB1 GY Junction box + enclosure (accepts 3x6mm) 89 SB = Sky Blue 56JB2 GY Junction box + enclosure (accepts 3x6mm) 89 SE = Mirror Silver 56/3E10 GR. Terminal block-Earth (accepts 3x6mm) 89 UC = Primed 56/3N10 BK Terminal block-Neutral (accepts 3x6mm) 89 UE = Gun Metal 56C313 GY Switched socket with enclosure 89 VI = Vanilla Cream 56C313LE GY Switched socket 89 WE = White 56C313/4EL GY RCD socket outlet with enclosure 90 YL = Yellow AUSTRALIA MALAYSIA SOUTH AFRICA Gerard Industries Pty Ltd Clipsal Malaysia SDN BHD Clipsal Lumex (PTY) Ltd 12 Park Terace, Bowden Telephone +603 551 91111 Telephone +27 11 314 5200 South Australia 5007 Facsimile +60 3 551 94378 Facsimile +27 11 314 5294 Telephone +61 88 269 0511 Email: [email protected] Facsimile +61 88 340 7530 MIDDLE EAST - U.A.E. Clipsal Middle East SRI LANKA ARGENTINA Telephone +971 6557 0777 Clipsal Lanka (Private) Ltd Controles Tecnova S.A. Facsimile +971 6557 0888 Telephone +94 7479 2111 Telephone +54 114 207 9534 Email [email protected] Facsimile +94 7479 23128 Facsimile +54 114 206 0228 Email: [email protected] Email: [email protected] NEW ZEALAND Clipsal Industries (NZ) Ltd TAIWAN GREECE Telephone +64 9576 3403 Clipsal (Taiwan) Co Ltd Clipsal Hellas S.A. Facsimile +64 9576 1015 Telephone +886 2255 83456 Telephone +30 210 993 9155 Email: [email protected] Facsimile +886 2255 83000 Facsimile +30 210 993 9730 Email: [email protected] Email: [email protected] PAKISTAN Clipsal Pakistan (PVT) Ltd THAILAND / CHINA Telephone +92 21 506 7278 Clipsal Thailand Ltd Clipsal Asia Ltd Facsimile +92 21 506 3369 Telephone +662 952 5338 Telephone +852 24870261 Email: [email protected] Facsimile +662 952 5337 Facsimile +852 2480 5865 Email: [email protected] Email: [email protected] PHILIPPINES Clipsal Philippines Inc UNITED STATES OF AMERICA INDIA Telephone +632 6830275 Clipsal Inc. Elcon - Clipsal India Ltd Facsimile +632 6830279 Telephone +1 858 674 2555 Telephone +91 11 647 3251 Email: [email protected] Facsimile +1 858 451 9777 Facsimile +91 11 621 3179 Email: REPUBLIC OF GEORGIA VIETNAM [email protected] Clipsal - Contact LLC Clipsal VTEC Telephone +995 3265 5599 Telephone +848 856 3002 Facsimile +995 3265 6699 Facsimile +848 856 3006 PT Clipsal Graha Nusantara Email: [email protected] Email: [email protected] Telephone +62 21 630 6430/634 7650 Facsimile +62 21 630 7729 ZIMBABWE Clipsal International PTE Ltd Electrical Systems (ESL) Telephone +856 415 3288 Telephone +263 73 2483/2484 Facsimile +856 415 3289 Facsimile +263 73 2517 Email: [email protected]

Clipsal is an international brand. All of the Clipsal worldwide offices can be accessed via our website www.clipsal.co.uk

Clipsal Ltd The Merlin Centre, Lancaster Road, High Wycombe, Buckinghamshire. HP12 3QL Tel +44 (0)1494 521111 Fax +44 (0)1494 523333 Web www.clipsal.co.uk e-mail sales@ clipsal.co.uk